www.mooseframework.org
Public Member Functions | Public Attributes | Protected Member Functions | Protected Attributes | List of all members
TimeIntegrator Class Referenceabstract

Base class for time integrators. More...

#include <TimeIntegrator.h>

Inheritance diagram for TimeIntegrator:
[legend]

Public Member Functions

 TimeIntegrator (const InputParameters &parameters)
 
virtual void initialSetup ()
 Called to setup datastructures. More...
 
virtual void init ()
 Called only before the very first timestep (t_step = 0) Never called again (not even during recover/restart) More...
 
virtual void preSolve ()
 
virtual void preStep ()
 
virtual void solve ()
 Solves the time step and sets the number of nonlinear and linear iterations. More...
 
virtual void postResidual (NumericVector< Number > &)
 Callback to the TimeIntegrator called immediately after the residuals are computed in NonlinearSystem::computeResidual(). More...
 
virtual void postSolve ()
 Callback to the TimeIntegrator called immediately after TimeIntegrator::solve() (so the name does make sense!). More...
 
virtual void postStep ()
 Callback to the TimeIntegrator called at the very end of time step. More...
 
virtual int order ()=0
 
virtual void computeTimeDerivatives ()=0
 
virtual unsigned int getNumNonlinearIterations () const
 Gets the total number of nonlinear iterations over all stages of the time step. More...
 
virtual unsigned int getNumLinearIterations () const
 Gets the total number of linear iterations over all stages of the time step. More...
 
const std::string & type () const
 Get the type of this object. More...
 
const std::string & name () const
 Get the name of the object. More...
 
const InputParametersparameters () const
 Get the parameters of the object. More...
 
template<typename T >
const T & getParam (const std::string &name) const
 Retrieve a parameter for the object. More...
 
template<typename T >
getCheckedPointerParam (const std::string &name, const std::string &error_string="") const
 Verifies that the requested parameter exists and is not NULL and returns it to the caller. More...
 
bool isParamValid (const std::string &name) const
 Test if the supplied parameter is valid. More...
 
MooseAppgetMooseApp () const
 Get the MooseApp this object is associated with. More...
 
virtual bool enabled () const
 Return the enabled status of the object. More...
 
template<typename... Args>
void paramError (const std::string &param, Args... args)
 Emits an error prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...
 
template<typename... Args>
void paramWarning (const std::string &param, Args... args)
 Emits a warning prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...
 
template<typename... Args>
void paramInfo (const std::string &param, Args... args)
 Emits an informational message prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...
 
template<typename... Args>
void mooseError (Args &&... args) const
 
template<typename... Args>
void mooseWarning (Args &&... args) const
 
template<typename... Args>
void mooseDeprecated (Args &&... args) const
 
template<typename... Args>
void mooseInfo (Args &&... args) const
 

Public Attributes

const ConsoleStream _console
 An instance of helper class to write streams to the Console objects. More...
 

Protected Member Functions

unsigned int getNumNonlinearIterationsLastSolve () const
 Gets the number of nonlinear iterations in the most recent solve. More...
 
unsigned int getNumLinearIterationsLastSolve () const
 Gets the number of linear iterations in the most recent solve. More...
 
template<typename T >
T & declareRestartableData (std::string data_name)
 Declare a piece of data as "restartable". More...
 
template<typename T >
T & declareRestartableData (std::string data_name, const T &init_value)
 Declare a piece of data as "restartable" and initialize it. More...
 
template<typename T >
T & declareRestartableDataWithContext (std::string data_name, void *context)
 Declare a piece of data as "restartable". More...
 
template<typename T >
T & declareRestartableDataWithContext (std::string data_name, const T &init_value, void *context)
 Declare a piece of data as "restartable" and initialize it. More...
 
template<typename T >
T & declareRecoverableData (std::string data_name)
 Declare a piece of data as "recoverable". More...
 
template<typename T >
T & declareRecoverableData (std::string data_name, const T &init_value)
 Declare a piece of data as "restartable" and initialize it. More...
 
template<typename T >
T & declareRestartableDataWithObjectName (std::string data_name, std::string object_name)
 Declare a piece of data as "restartable". More...
 
template<typename T >
T & declareRestartableDataWithObjectNameWithContext (std::string data_name, std::string object_name, void *context)
 Declare a piece of data as "restartable". More...
 

Protected Attributes

FEProblemBase_fe_problem
 
SystemBase_sys
 
NonlinearSystemBase_nl
 
const NonlinearImplicitSystem * _nonlinear_implicit_system
 Nonlinear implicit system, if applicable; otherwise, nullptr. More...
 
Real & _du_dot_du
 solution vector for \( {du^dot}\over{du} \) More...
 
const NumericVector< Number > *& _solution
 solution vectors More...
 
const NumericVector< Number > & _solution_old
 
const NumericVector< Number > & _solution_older
 
int & _t_step
 
Real & _dt
 
Real & _dt_old
 
NumericVector< Number > & _Re_time
 residual vector for time contributions More...
 
NumericVector< Number > & _Re_non_time
 residual vector for non-time contributions More...
 
unsigned int _n_nonlinear_iterations
 Total number of nonlinear iterations over all stages of the time step. More...
 
unsigned int _n_linear_iterations
 Total number of linear iterations over all stages of the time step. More...
 
const InputParameters_pars
 Parameters of this object, references the InputParameters stored in the InputParametersWarehouse. More...
 
MooseApp_app
 The MooseApp this object is associated with. More...
 
const std::string & _type
 The type of this object (the Class name) More...
 
const std::string & _name
 The name of this object, reference to value stored in InputParameters. More...
 
const bool & _enabled
 Reference to the "enable" InputParaemters, used by Controls for toggling on/off MooseObjects. More...
 

Detailed Description

Base class for time integrators.

Time integrators fulfill two functions: 1) computing u_dot vector (used for computing time derivatives in kernels) and its derivative 2) combining the residual vectors into the final one

Capability (1) is used by both NonlinearSystem and AuxiliarySystem, while (2) can be obviously used only by NonlinearSystem (AuxiliarySystem does not produce residual).

Definition at line 44 of file TimeIntegrator.h.

Constructor & Destructor Documentation

◆ TimeIntegrator()

TimeIntegrator::TimeIntegrator ( const InputParameters parameters)

Definition at line 27 of file TimeIntegrator.C.

29  Restartable(this, "TimeIntegrators"),
30  _fe_problem(*getCheckedPointerParam<FEProblemBase *>("_fe_problem_base")),
31  _sys(*getCheckedPointerParam<SystemBase *>("_sys")),
33  _nonlinear_implicit_system(dynamic_cast<const NonlinearImplicitSystem *>(&_sys.system())),
39  _dt(_fe_problem.dt()),
45 {
47 }
NonlinearSystemBase & _nl
NumericVector< Number > & getResidualTimeVector()
Return a numeric vector that is associated with the time tag.
virtual Real & dtOld() const
NonlinearSystemBase & getNonlinearSystemBase()
virtual NumericVector< Number > & solutionOld()=0
FEProblemBase & _fe_problem
NumericVector< Number > & _Re_non_time
residual vector for non-time contributions
SystemBase & _sys
MooseObject(const InputParameters &parameters)
Definition: MooseObject.C:48
virtual Number & duDotDu()
Definition: SystemBase.h:156
const InputParameters & parameters() const
Get the parameters of the object.
Definition: MooseObject.h:57
virtual void setUDotRequested(const bool u_dot_requested)
Set boolean flag to true to store solution time derivative.
unsigned int _n_linear_iterations
Total number of linear iterations over all stages of the time step.
virtual System & system()=0
Get the reference to the libMesh system.
Restartable(const MooseObject *moose_object, const std::string &system_name)
Class constructor.
Definition: Restartable.C:17
virtual int & timeStep() const
const NumericVector< Number > & _solution_older
Real & _du_dot_du
solution vector for
virtual NumericVector< Number > & solutionOlder()=0
NumericVector< Number > & _Re_time
residual vector for time contributions
const NumericVector< Number > & _solution_old
unsigned int _n_nonlinear_iterations
Total number of nonlinear iterations over all stages of the time step.
const NumericVector< Number > *& _solution
solution vectors
NumericVector< Number > & getResidualNonTimeVector()
Return a numeric vector that is associated with the nontime tag.
virtual Real & dt() const
const NonlinearImplicitSystem * _nonlinear_implicit_system
Nonlinear implicit system, if applicable; otherwise, nullptr.
virtual const NumericVector< Number > *& currentSolution()=0
The solution vector that is currently being operated on.

Member Function Documentation

◆ computeTimeDerivatives()

virtual void TimeIntegrator::computeTimeDerivatives ( )
pure virtual

◆ declareRecoverableData() [1/2]

template<typename T >
T & Restartable::declareRecoverableData ( std::string  data_name)
protectedinherited

Declare a piece of data as "recoverable".

This means that in the event of a recovery this piece of data will be restored back to its previous value.

Note - this data will NOT be restored on Restart!

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)

Definition at line 269 of file Restartable.h.

270 {
271  std::string full_name = _restartable_system_name + "/" + _restartable_name + "/" + data_name;
272 
273  registerRecoverableDataOnApp(full_name);
274 
275  return declareRestartableDataWithContext<T>(data_name, nullptr);
276 }
std::string _restartable_system_name
The system name this object is in.
Definition: Restartable.h:194
std::string _restartable_name
The name of the object.
Definition: Restartable.h:191
void registerRecoverableDataOnApp(std::string name)
Helper function for actually registering the restartable data.
Definition: Restartable.C:54

◆ declareRecoverableData() [2/2]

template<typename T >
T & Restartable::declareRecoverableData ( std::string  data_name,
const T &  init_value 
)
protectedinherited

Declare a piece of data as "restartable" and initialize it.

This means that in the event of a restart this piece of data will be restored back to its previous value.

Note - this data will NOT be restored on Restart!

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)
init_valueThe initial value of the data

Definition at line 280 of file Restartable.h.

281 {
282  std::string full_name = _restartable_system_name + "/" + _restartable_name + "/" + data_name;
283 
284  registerRecoverableDataOnApp(full_name);
285 
286  return declareRestartableDataWithContext<T>(data_name, init_value, nullptr);
287 }
std::string _restartable_system_name
The system name this object is in.
Definition: Restartable.h:194
std::string _restartable_name
The name of the object.
Definition: Restartable.h:191
void registerRecoverableDataOnApp(std::string name)
Helper function for actually registering the restartable data.
Definition: Restartable.C:54

◆ declareRestartableData() [1/2]

template<typename T >
T & Restartable::declareRestartableData ( std::string  data_name)
protectedinherited

Declare a piece of data as "restartable".

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)

Definition at line 202 of file Restartable.h.

203 {
204  return declareRestartableDataWithContext<T>(data_name, nullptr);
205 }

◆ declareRestartableData() [2/2]

template<typename T >
T & Restartable::declareRestartableData ( std::string  data_name,
const T &  init_value 
)
protectedinherited

Declare a piece of data as "restartable" and initialize it.

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)
init_valueThe initial value of the data

Definition at line 209 of file Restartable.h.

210 {
211  return declareRestartableDataWithContext<T>(data_name, init_value, nullptr);
212 }

◆ declareRestartableDataWithContext() [1/2]

template<typename T >
T & Restartable::declareRestartableDataWithContext ( std::string  data_name,
void *  context 
)
protectedinherited

Declare a piece of data as "restartable".

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)
contextContext pointer that will be passed to the load and store functions

Definition at line 216 of file Restartable.h.

217 {
218  std::string full_name = _restartable_system_name + "/" + _restartable_name + "/" + data_name;
219  auto data_ptr = libmesh_make_unique<RestartableData<T>>(full_name, context);
220  T & restartable_data_ref = data_ptr->get();
221 
222  registerRestartableDataOnApp(full_name, std::move(data_ptr), _restartable_tid);
223 
224  return restartable_data_ref;
225 }
std::string _restartable_system_name
The system name this object is in.
Definition: Restartable.h:194
std::string _restartable_name
The name of the object.
Definition: Restartable.h:191
THREAD_ID _restartable_tid
The thread ID for this object.
Definition: Restartable.h:197
void registerRestartableDataOnApp(std::string name, std::unique_ptr< RestartableDataValue > data, THREAD_ID tid)
Helper function for actually registering the restartable data.
Definition: Restartable.C:46

◆ declareRestartableDataWithContext() [2/2]

template<typename T >
T & Restartable::declareRestartableDataWithContext ( std::string  data_name,
const T &  init_value,
void *  context 
)
protectedinherited

Declare a piece of data as "restartable" and initialize it.

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)
init_valueThe initial value of the data
contextContext pointer that will be passed to the load and store functions

Definition at line 229 of file Restartable.h.

232 {
233  std::string full_name = _restartable_system_name + "/" + _restartable_name + "/" + data_name;
234  auto data_ptr = libmesh_make_unique<RestartableData<T>>(full_name, context);
235  data_ptr->set() = init_value;
236 
237  T & restartable_data_ref = data_ptr->get();
238  registerRestartableDataOnApp(full_name, std::move(data_ptr), _restartable_tid);
239 
240  return restartable_data_ref;
241 }
std::string _restartable_system_name
The system name this object is in.
Definition: Restartable.h:194
std::string _restartable_name
The name of the object.
Definition: Restartable.h:191
THREAD_ID _restartable_tid
The thread ID for this object.
Definition: Restartable.h:197
void registerRestartableDataOnApp(std::string name, std::unique_ptr< RestartableDataValue > data, THREAD_ID tid)
Helper function for actually registering the restartable data.
Definition: Restartable.C:46

◆ declareRestartableDataWithObjectName()

template<typename T >
T & Restartable::declareRestartableDataWithObjectName ( std::string  data_name,
std::string  object_name 
)
protectedinherited

Declare a piece of data as "restartable".

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)
object_nameA supplied name for the object that is declaring this data.

Definition at line 245 of file Restartable.h.

246 {
247  return declareRestartableDataWithObjectNameWithContext<T>(data_name, object_name, nullptr);
248 }

◆ declareRestartableDataWithObjectNameWithContext()

template<typename T >
T & Restartable::declareRestartableDataWithObjectNameWithContext ( std::string  data_name,
std::string  object_name,
void *  context 
)
protectedinherited

Declare a piece of data as "restartable".

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters
data_nameThe name of the data (usually just use the same name as the member variable)
object_nameA supplied name for the object that is declaring this data.
contextContext pointer that will be passed to the load and store functions

Definition at line 252 of file Restartable.h.

255 {
256  std::string old_name = _restartable_name;
257 
258  _restartable_name = object_name;
259 
260  T & value = declareRestartableDataWithContext<T>(data_name, context);
261 
262  _restartable_name = old_name;
263 
264  return value;
265 }
std::string _restartable_name
The name of the object.
Definition: Restartable.h:191

◆ enabled()

virtual bool MooseObject::enabled ( ) const
inlinevirtualinherited

Return the enabled status of the object.

Reimplemented in EigenKernel.

Definition at line 91 of file MooseObject.h.

Referenced by EigenKernel::enabled().

91 { return _enabled; }
const bool & _enabled
Reference to the "enable" InputParaemters, used by Controls for toggling on/off MooseObjects.
Definition: MooseObject.h:180

◆ getCheckedPointerParam()

template<typename T >
T MooseObject::getCheckedPointerParam ( const std::string &  name,
const std::string &  error_string = "" 
) const
inlineinherited

Verifies that the requested parameter exists and is not NULL and returns it to the caller.

The template parameter must be a pointer or an error will be thrown.

Definition at line 72 of file MooseObject.h.

73  {
74  return parameters().getCheckedPointerParam<T>(name, error_string);
75  }
T getCheckedPointerParam(const std::string &name, const std::string &error_string="") const
Verifies that the requested parameter exists and is not NULL and returns it to the caller...
const InputParameters & parameters() const
Get the parameters of the object.
Definition: MooseObject.h:57
const std::string & name() const
Get the name of the object.
Definition: MooseObject.h:51

◆ getMooseApp()

MooseApp& MooseObject::getMooseApp ( ) const
inlineinherited

Get the MooseApp this object is associated with.

Definition at line 86 of file MooseObject.h.

Referenced by RestartableDataIO::createBackup(), RestartableDataIO::deserializeRestartableData(), ConsoleUtils::outputMeshInformation(), Resurrector::restartRestartableData(), and RestartableDataIO::restoreBackup().

86 { return _app; }
MooseApp & _app
The MooseApp this object is associated with.
Definition: MooseObject.h:171

◆ getNumLinearIterations()

virtual unsigned int TimeIntegrator::getNumLinearIterations ( ) const
inlinevirtual

Gets the total number of linear iterations over all stages of the time step.

Definition at line 111 of file TimeIntegrator.h.

111 { return _n_linear_iterations; }
unsigned int _n_linear_iterations
Total number of linear iterations over all stages of the time step.

◆ getNumLinearIterationsLastSolve()

unsigned int TimeIntegrator::getNumLinearIterationsLastSolve ( ) const
protected

Gets the number of linear iterations in the most recent solve.

Definition at line 65 of file TimeIntegrator.C.

Referenced by LStableDirk2::solve(), LStableDirk3::solve(), ImplicitMidpoint::solve(), ExplicitTVDRK2::solve(), LStableDirk4::solve(), AStableDirk4::solve(), ExplicitRK2::solve(), and solve().

66 {
67  NonlinearSolver<Real> & nonlinear_solver =
68  static_cast<NonlinearSolver<Real> &>(*_nonlinear_implicit_system->nonlinear_solver);
69 
70  return nonlinear_solver.get_total_linear_iterations();
71 }
const NonlinearImplicitSystem * _nonlinear_implicit_system
Nonlinear implicit system, if applicable; otherwise, nullptr.

◆ getNumNonlinearIterations()

virtual unsigned int TimeIntegrator::getNumNonlinearIterations ( ) const
inlinevirtual

Gets the total number of nonlinear iterations over all stages of the time step.

Definition at line 106 of file TimeIntegrator.h.

106 { return _n_nonlinear_iterations; }
unsigned int _n_nonlinear_iterations
Total number of nonlinear iterations over all stages of the time step.

◆ getNumNonlinearIterationsLastSolve()

unsigned int TimeIntegrator::getNumNonlinearIterationsLastSolve ( ) const
protected

Gets the number of nonlinear iterations in the most recent solve.

Definition at line 59 of file TimeIntegrator.C.

Referenced by LStableDirk2::solve(), LStableDirk3::solve(), ImplicitMidpoint::solve(), ExplicitTVDRK2::solve(), LStableDirk4::solve(), AStableDirk4::solve(), ExplicitRK2::solve(), and solve().

60 {
61  return _nonlinear_implicit_system->n_nonlinear_iterations();
62 }
const NonlinearImplicitSystem * _nonlinear_implicit_system
Nonlinear implicit system, if applicable; otherwise, nullptr.

◆ getParam()

template<typename T >
const T & MooseObject::getParam ( const std::string &  name) const
inherited

Retrieve a parameter for the object.

Parameters
nameThe name of the parameter
Returns
The value of the parameter

Definition at line 185 of file MooseObject.h.

Referenced by FEProblemBase::addMaterialHelper(), ConstraintWarehouse::addObject(), BicubicSplineFunction::BicubicSplineFunction(), Piecewise::buildFromXandY(), DerivativeParsedMaterial::DerivativeParsedMaterial(), EigenKernel::EigenKernel(), FEProblemBase::FEProblemBase(), FieldSplitPreconditioner::FieldSplitPreconditioner(), FiniteDifferencePreconditioner::FiniteDifferencePreconditioner(), SideSetsBetweenSubdomainsGenerator::generate(), ExtraNodesetGenerator::generate(), MeshExtruderGenerator::generate(), SideSetsAroundSubdomainGenerator::generate(), GenericConstantRankTwoTensor::GenericConstantRankTwoTensor(), TimeSequenceStepper::init(), AttribThread::initFrom(), BlockRestrictable::initializeBlockRestrictable(), BoundaryRestrictable::initializeBoundaryRestrictable(), Console::initialSetup(), AdvancedOutput::initialSetup(), SideSetsBetweenSubdomains::modify(), AddExtraNodeset::modify(), MeshExtruder::modify(), SideSetsAroundSubdomain::modify(), ParsedAddSideset::ParsedAddSideset(), ParsedAux::ParsedAux(), ParsedGenerateSideset::ParsedGenerateSideset(), ParsedMaterial::ParsedMaterial(), ParsedODEKernel::ParsedODEKernel(), ParsedSubdomainMeshGenerator::ParsedSubdomainMeshGenerator(), ParsedSubdomainMeshModifier::ParsedSubdomainMeshModifier(), PhysicsBasedPreconditioner::PhysicsBasedPreconditioner(), SingleMatrixPreconditioner::SingleMatrixPreconditioner(), TimePeriod::TimePeriod(), and VectorOfPostprocessors::VectorOfPostprocessors().

186 {
187  return InputParameters::getParamHelper(name, _pars, static_cast<T *>(0));
188 }
static const T & getParamHelper(const std::string &name, const InputParameters &pars, const T *the_type)
const InputParameters & _pars
Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.
Definition: MooseObject.h:168
const std::string & name() const
Get the name of the object.
Definition: MooseObject.h:51

◆ init()

virtual void TimeIntegrator::init ( )
inlinevirtual

Called only before the very first timestep (t_step = 0) Never called again (not even during recover/restart)

Reimplemented in ActuallyExplicitEuler, and CrankNicolson.

Definition at line 67 of file TimeIntegrator.h.

Referenced by Transient::init().

67 {}

◆ initialSetup()

virtual void TimeIntegrator::initialSetup ( )
inlinevirtual

Called to setup datastructures.

WILL be called during recover/restart

Should NOT do any computation for initial values use init() for that

Note: this doesn't inherit this from SetupInterface because I'm not sure that we need all the other setup functions for TimeIntegrator

Reimplemented in ActuallyExplicitEuler.

Definition at line 61 of file TimeIntegrator.h.

61 {}

◆ isParamValid()

bool MooseObject::isParamValid ( const std::string &  name) const
inlineinherited

Test if the supplied parameter is valid.

Parameters
nameThe name of the parameter to test

Definition at line 81 of file MooseObject.h.

Referenced by AdvancedOutput::AdvancedOutput(), BicubicSplineFunction::BicubicSplineFunction(), Piecewise::buildFromFile(), Piecewise::buildFromXandY(), DistributedGeneratedMesh::buildMesh(), GeneratedMesh::buildMesh(), LibmeshPartitioner::clone(), OversampleOutput::cloneMesh(), CSVReader::CSVReader(), MultiAppNearestNodeTransfer::execute(), Exodus::Exodus(), FEProblemBase::FEProblemBase(), FileOutput::FileOutput(), MultiApp::fillPositions(), FunctionDT::FunctionDT(), RenameBoundaryGenerator::generate(), ElementSubdomainIDGenerator::generate(), BreakBoundaryOnSubdomainGenerator::generate(), ExtraNodesetGenerator::generate(), LowerDBlockFromSidesetGenerator::generate(), MeshSideSetGenerator::generate(), RenameBlockGenerator::generate(), GeneratedMeshGenerator::generate(), ParsedSubdomainMeshGenerator::generate(), MeshExtruderGenerator::generate(), SubdomainBoundingBoxGenerator::generate(), PatternedMeshGenerator::generate(), MultiAppNearestNodeTransfer::getLocalEntities(), MeshGenerator::getMesh(), MultiAppNearestNodeTransfer::getNearestNode(), IterationAdaptiveDT::init(), EigenExecutionerBase::init(), MooseMesh::init(), AdvancedOutput::initExecutionTypes(), BlockRestrictable::initializeBlockRestrictable(), BoundaryRestrictable::initializeBoundaryRestrictable(), SolutionAux::initialSetup(), MooseParsedVectorFunction::initialSetup(), Console::initialSetup(), Receiver::initialSetup(), SolutionFunction::initialSetup(), MooseParsedGradFunction::initialSetup(), MooseParsedFunction::initialSetup(), AdvancedOutput::initialSetup(), AdvancedOutput::initPostprocessorOrVectorPostprocessorLists(), IterationAdaptiveDT::IterationAdaptiveDT(), LeastSquaresFit::LeastSquaresFit(), LibmeshPartitioner::LibmeshPartitioner(), BreakBoundaryOnSubdomain::modify(), MeshExtruder::modify(), MeshSideSet::modify(), LowerDBlockFromSideset::modify(), AssignElementSubdomainID::modify(), ParsedSubdomainMeshModifier::modify(), RenameBlock::modify(), SubdomainBoundingBox::modify(), MooseMesh::MooseMesh(), EigenExecutionerBase::normalizeSolution(), Output::Output(), PetscOutput::PetscOutput(), Piecewise::Piecewise(), SolutionUserObject::readExodusII(), RenameBlock::RenameBlock(), RenameBlockGenerator::RenameBlockGenerator(), RenameBoundaryGenerator::RenameBoundaryGenerator(), SolutionUserObject::SolutionUserObject(), and TimePeriod::TimePeriod().

81 { return _pars.isParamValid(name); }
const InputParameters & _pars
Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.
Definition: MooseObject.h:168
const std::string & name() const
Get the name of the object.
Definition: MooseObject.h:51
bool isParamValid(const std::string &name) const
This method returns parameters that have been initialized in one fashion or another, i.e.

◆ mooseDeprecated()

template<typename... Args>
void MooseObject::mooseDeprecated ( Args &&...  args) const
inlineinherited

◆ mooseError()

template<typename... Args>
void MooseObject::mooseError ( Args &&...  args) const
inlineinherited

Definition at line 140 of file MooseObject.h.

Referenced by PetscExternalPartitioner::_do_partition(), GridPartitioner::_do_partition(), FEProblemBase::addConstraint(), FEProblemBase::addInitialCondition(), FEProblem::addLineSearch(), FEProblemBase::addLineSearch(), FEProblemBase::addOutput(), DiracKernel::addPointWithValidId(), FEProblemBase::addPostprocessor(), MooseMesh::addQuadratureNode(), FEProblemBase::addVectorPostprocessor(), Output::advancedExecuteOn(), AllSideSetsByNormalsGenerator::AllSideSetsByNormalsGenerator(), AnnularMesh::AnnularMesh(), AnnularMeshGenerator::AnnularMeshGenerator(), MultiApp::appPostprocessorValue(), MultiApp::appProblem(), MultiApp::appProblemBase(), MultiApp::appUserObjectBase(), DerivativeParsedMaterialHelper::assembleDerivatives(), Function::average(), Axisymmetric2D3DSolutionFunction::Axisymmetric2D3DSolutionFunction(), BicubicSplineFunction::BicubicSplineFunction(), BoundingValueElementDamper::BoundingValueElementDamper(), BoundingValueNodalDamper::BoundingValueNodalDamper(), BoundsAux::BoundsAux(), BreakMeshByBlockGenerator::BreakMeshByBlockGenerator(), BreakMeshByBlockGeneratorBase::BreakMeshByBlockGeneratorBase(), MooseMesh::buildCoarseningMap(), Piecewise::buildFromFile(), Piecewise::buildFromXandY(), Piecewise::buildFromXY(), TiledMesh::buildMesh(), FileMesh::buildMesh(), SpiralAnnularMesh::buildMesh(), DistributedGeneratedMesh::buildMesh(), GeneratedMesh::buildMesh(), ImageMeshGenerator::buildMesh3D(), ImageMesh::buildMesh3D(), MooseMesh::buildRefinementMap(), MooseMesh::buildSideList(), ChangeOverTimePostprocessor::ChangeOverTimePostprocessor(), EigenExecutionerBase::chebyshev(), SubProblem::checkBlockMatProps(), SubProblem::checkBoundaryMatProps(), FEProblemBase::checkCoordinateSystems(), FEProblemBase::checkDependMaterialsHelper(), FEProblemBase::checkDisplacementOrders(), Material::checkExecutionStage(), BreakMeshByBlockBase::checkInputParameter(), Steady::checkIntegrity(), EigenExecutionerBase::checkIntegrity(), ActuallyExplicitEuler::checkLinearConvergence(), FEProblemBase::checkProblemIntegrity(), Material::checkStatefulSanity(), FEProblemBase::checkUserObjects(), LibmeshPartitioner::clone(), MooseMesh::clone(), ComparisonPostprocessor::comparisonIsTrue(), CompositeFunction::CompositeFunction(), ElementLpNormAux::compute(), ElementH1ErrorFunctionAux::compute(), NodalPatchRecovery::compute(), InterfaceKernel::computeElemNeighJacobian(), TimeSequenceStepperBase::computeFailedDT(), IterationAdaptiveDT::computeFailedDT(), TimeStepper::computeFailedDT(), HistogramVectorPostprocessor::computeHistogram(), EqualValueEmbeddedConstraint::computeQpJacobian(), EqualValueEmbeddedConstraint::computeQpOffDiagJacobian(), FEProblemBase::computeResidualInternal(), FEProblemBase::computeResidualTag(), FEProblemBase::computeResidualType(), StatisticsVectorPostprocessor::computeStatValue(), Material::computeSubdomainProperties(), BDF2::computeTimeDerivatives(), ExplicitEuler::computeTimeDerivatives(), ImplicitEuler::computeTimeDerivatives(), NewmarkBeta::computeTimeDerivatives(), CrankNicolson::computeTimeDerivatives(), ActuallyExplicitEuler::computeTimeDerivatives(), LStableDirk2::computeTimeDerivatives(), LStableDirk3::computeTimeDerivatives(), ImplicitMidpoint::computeTimeDerivatives(), ExplicitTVDRK2::computeTimeDerivatives(), AStableDirk4::computeTimeDerivatives(), LStableDirk4::computeTimeDerivatives(), ExplicitRK2::computeTimeDerivatives(), PenetrationAux::computeValue(), ConcentricCircleMesh::ConcentricCircleMesh(), ConcentricCircleMeshGenerator::ConcentricCircleMeshGenerator(), TimeStepper::constrainStep(), AuxKernel::coupledDot(), AuxKernel::coupledDotDu(), CoupledForce::CoupledForce(), DebugResidualAux::DebugResidualAux(), BicubicSplineFunction::derivative(), DerivativeSumMaterial::DerivativeSumMaterial(), DGKernel::DGKernel(), FEProblemBase::duplicateVariableCheck(), EigenProblem::EigenProblem(), Eigenvalues::Eigenvalues(), ElementalVariableValue::ElementalVariableValue(), ElementQualityAux::ElementQualityAux(), MooseMesh::errorIfDistributedMesh(), SolutionUserObject::evalMeshFunction(), SolutionUserObject::evalMeshFunctionGradient(), SolutionUserObject::evalMultiValuedMeshFunction(), SolutionUserObject::evalMultiValuedMeshFunctionGradient(), PerflogDumper::execute(), MultiAppPostprocessorTransfer::execute(), DiscreteElementUserObject::execute(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), ElementQualityChecker::execute(), NodalValueSampler::execute(), MultiAppNearestNodeTransfer::execute(), PointValue::execute(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppScalarToAuxScalarTransfer::execute(), MultiAppVariableValueSampleTransfer::execute(), MultiAppInterpolationTransfer::execute(), MultiAppUserObjectTransfer::execute(), FindValueOnLine::execute(), TimeExtremeValue::execute(), VectorPostprocessorComparison::execute(), LeastSquaresFit::execute(), LeastSquaresFitHistory::execute(), FEProblemBase::executeControls(), MultiAppVectorPostprocessorTransfer::executeFromMultiapp(), MultiAppVectorPostprocessorTransfer::executeToMultiapp(), Exodus::Exodus(), FileOutput::FileOutput(), CentroidMultiApp::fillPositions(), MultiApp::fillPositions(), VerifyElementUniqueID::finalize(), VerifyNodalUniqueID::finalize(), DiscreteElementUserObject::finalize(), ElementQualityChecker::finalize(), MemoryUsage::finalize(), PointSamplerBase::finalize(), Transfer::find_sys(), BreakMeshByBlockBase::findFreeBoundaryId(), BreakMeshByBlockGeneratorBase::findFreeBoundaryId(), FunctionDT::FunctionDT(), FunctionMaterialBase::FunctionMaterialBase(), ParsedMaterialHelper::functionParse(), FunctionScalarAux::FunctionScalarAux(), FunctionScalarIC::FunctionScalarIC(), GapValueAux::GapValueAux(), ExtraNodesetGenerator::generate(), ElementSubdomainIDGenerator::generate(), RenameBlockGenerator::generate(), RenameBoundaryGenerator::generate(), StitchedMeshGenerator::generate(), GeneratedMeshGenerator::generate(), MeshExtruderGenerator::generate(), SpiralAnnularMeshGenerator::generate(), SideSetsFromBoundingBoxGenerator::generate(), BoundingBoxNodeSetGenerator::generate(), PatternedMeshGenerator::generate(), GeneratedMesh::GeneratedMesh(), GeneratedMeshGenerator::GeneratedMeshGenerator(), RandomICBase::generateRandom(), GenericConstantMaterial::GenericConstantMaterial(), GenericFunctionMaterial::GenericFunctionMaterial(), MooseMesh::getBoundaryID(), MultiApp::getBoundingBox(), MooseMesh::getCoarseningMap(), Control::getControllableParameterByName(), FEProblemBase::getCoordSystem(), PiecewiseConstant::getDirection(), FEProblemBase::getDistribution(), ElementGenerator::getElemType(), MultiApp::getExecutioner(), FEProblemBase::getFunction(), SolutionUserObject::getLocalVarIndex(), AuxKernel::getMaterialProperty(), AuxKernel::getMaterialPropertyOld(), AuxKernel::getMaterialPropertyOlder(), SubProblem::getMatrixTagID(), AnnularMesh::getMaxInDimension(), DistributedGeneratedMesh::getMaxInDimension(), GeneratedMesh::getMaxInDimension(), FEProblemBase::getMaxQps(), FEProblemBase::getMaxShapeFunctions(), AnnularMesh::getMinInDimension(), DistributedGeneratedMesh::getMinInDimension(), GeneratedMesh::getMinInDimension(), MooseMesh::getMortarInterface(), MooseMesh::getMortarInterfaceByName(), MooseMesh::getNodeBlockIds(), MooseMesh::getNodeList(), FEProblemBase::getNonlinearSystem(), MooseMesh::getPairedBoundaryMapping(), ImageMeshGenerator::GetPixelInfo(), ImageMesh::GetPixelInfo(), MaterialStdVectorAux::getRealValue(), MooseMesh::getRefinementMap(), FEProblemBase::getSampler(), DisplacedProblem::getScalarVariable(), FEProblemBase::getScalarVariable(), DisplacedProblem::getStandardVariable(), FEProblemBase::getStandardVariable(), MooseMesh::getSubdomainBoundaryIds(), MooseMesh::getSubdomainID(), DisplacedProblem::getSystem(), FEProblemBase::getSystem(), FEProblemBase::getUserObject(), FEProblemBase::getUserObjectBase(), PerformanceData::getValue(), Residual::getValue(), PerfGraphData::getValue(), LineValueSampler::getValue(), FindValueOnLine::getValueAtPoint(), SubProblem::getVariableHelper(), SubProblem::getVectorTagID(), DisplacedProblem::getVectorVariable(), FEProblemBase::getVectorVariable(), MultiApp::globalAppToLocal(), MooseParsedVectorFunction::gradient(), AdvancedOutput::hasOutputHelper(), CrankNicolson::init(), CSVTimeSequenceStepper::init(), IterationAdaptiveDT::init(), EigenExecutionerBase::init(), Transient::init(), MooseMesh::init(), FEProblemBase::init(), NumPicardIterations::initialize(), PiecewiseBase::initialSetup(), FullSolveMultiApp::initialSetup(), SolutionAux::initialSetup(), Axisymmetric2D3DSolutionFunction::initialSetup(), Exodus::initialSetup(), SolutionFunction::initialSetup(), SolutionUserObject::initialSetup(), FEProblemBase::initialSetup(), AdvancedOutput::initOutputList(), AdvancedOutput::initShowHideLists(), Material::initStatefulProperties(), Function::integral(), InterfaceKernel::InterfaceKernel(), InterfaceTimeKernel::InterfaceTimeKernel(), EigenExecutionerBase::inversePowerIteration(), InversePowerMethod::InversePowerMethod(), IterationAdaptiveDT::IterationAdaptiveDT(), LayeredSideIntegral::LayeredSideIntegral(), LeastSquaresFit::LeastSquaresFit(), LibmeshPartitioner::LibmeshPartitioner(), LinearCombinationFunction::LinearCombinationFunction(), LinearCombinationPostprocessor::LinearCombinationPostprocessor(), LinearNodalConstraint::LinearNodalConstraint(), LineMaterialSamplerBase< Real >::LineMaterialSamplerBase(), LineSearch::lineSearch(), LineValueSampler::LineValueSampler(), MaterialRealTensorValueAux::MaterialRealTensorValueAux(), MaterialRealVectorValueAux::MaterialRealVectorValueAux(), MaterialStdVectorRealGradientAux::MaterialStdVectorRealGradientAux(), MaterialVectorPostprocessor::MaterialVectorPostprocessor(), Distribution::median(), SubProblem::meshChanged(), MeshExtruder::MeshExtruder(), MeshExtruderGenerator::MeshExtruderGenerator(), MeshSideSetGenerator::MeshSideSetGenerator(), SideSetsFromNormals::modify(), SideSetsFromPoints::modify(), BreakMeshByBlockBase::modify(), MeshExtruder::modify(), AddExtraNodeset::modify(), AssignElementSubdomainID::modify(), SmoothMesh::modify(), AddAllSideSetsByNormals::modify(), ElementDeleterBase::modify(), ParsedSubdomainMeshModifier::modify(), RenameBlock::modify(), ImageSubdomain::modify(), BoundingBoxNodeSet::modify(), OrientedSubdomainBoundingBox::modify(), AddSideSetsFromBoundingBox::modify(), SubdomainBoundingBox::modify(), MooseMesh::MooseMesh(), MultiAppMeshFunctionTransfer::MultiAppMeshFunctionTransfer(), MultiAppPostprocessorTransfer::MultiAppPostprocessorTransfer(), NearestNodeDistanceAux::NearestNodeDistanceAux(), NearestNodeValueAux::NearestNodeValueAux(), RenameBlockGenerator::newBlockID(), RenameBlock::newBlockID(), RenameBlockGenerator::newBlockName(), RenameBlock::newBlockName(), NewmarkBeta::NewmarkBeta(), NodalConstraint::NodalConstraint(), NodalScalarKernel::NodalScalarKernel(), NodalVariableValue::NodalVariableValue(), NumDOFs::NumDOFs(), NumNonlinearIterations::NumNonlinearIterations(), NumVars::NumVars(), ElementSideNeighborLayers::operator()(), ElementPointNeighbors::operator()(), RelationshipManager::operator==(), XDA::output(), SolutionHistory::output(), AdvancedOutput::outputElementalVariables(), AdvancedOutput::outputInput(), AdvancedOutput::outputNodalVariables(), AdvancedOutput::outputPostprocessors(), AdvancedOutput::outputScalarVariables(), Exodus::outputSetup(), AdvancedOutput::outputSystemInformation(), Console::outputVectorPostprocessors(), AdvancedOutput::outputVectorPostprocessors(), MooseObject::paramError(), PiecewiseBilinear::parse(), ParsedAddSideset::ParsedAddSideset(), ParsedAux::ParsedAux(), ParsedGenerateSideset::ParsedGenerateSideset(), ParsedODEKernel::ParsedODEKernel(), ParsedSubdomainMeshGenerator::ParsedSubdomainMeshGenerator(), ParsedSubdomainMeshModifier::ParsedSubdomainMeshModifier(), PatternedMesh::PatternedMesh(), PetscExternalPartitioner::PetscExternalPartitioner(), PhysicsBasedPreconditioner::PhysicsBasedPreconditioner(), Piecewise::Piecewise(), PiecewiseBilinear::PiecewiseBilinear(), PiecewiseLinearInterpolationMaterial::PiecewiseLinearInterpolationMaterial(), PiecewiseMulticonstant::PiecewiseMulticonstant(), PiecewiseMultiInterpolation::PiecewiseMultiInterpolation(), SolutionUserObject::pointValueGradientWrapper(), SolutionUserObject::pointValueWrapper(), LStableDirk2::postResidual(), LStableDirk3::postResidual(), ImplicitMidpoint::postResidual(), ExplicitTVDRK2::postResidual(), LStableDirk4::postResidual(), AStableDirk4::postResidual(), ExplicitRK2::postResidual(), Predictor::Predictor(), SolutionUserObject::readExodusII(), SolutionUserObject::readXda(), EqualValueEmbeddedConstraint::reinitConstraint(), RelativeSolutionDifferenceNorm::RelativeSolutionDifferenceNorm(), RenameBlock::RenameBlock(), RenameBlockGenerator::RenameBlockGenerator(), RenameBoundaryGenerator::RenameBoundaryGenerator(), RinglebMesh::RinglebMesh(), RinglebMeshGenerator::RinglebMeshGenerator(), ScalarComponentIC::ScalarComponentIC(), BicubicSplineFunction::secondDerivative(), FEProblemBase::setCoordSystem(), PiecewiseBase::setData(), EigenProblem::setEigenproblemType(), Sampler::setNumberOfRequiedRandomSeeds(), Exodus::setOutputDimension(), Split::setup(), TransientMultiApp::setupApp(), TimeSequenceStepperBase::setupSequence(), Transient::setupTimeIntegrator(), SideSetsFromBoundingBoxGenerator::SideSetsFromBoundingBoxGenerator(), SideSetsFromNormals::SideSetsFromNormals(), SideSetsFromNormalsGenerator::SideSetsFromNormalsGenerator(), SideSetsFromPoints::SideSetsFromPoints(), SideSetsFromPointsGenerator::SideSetsFromPointsGenerator(), SolutionTimeAdaptiveDT::SolutionTimeAdaptiveDT(), SolutionUserObject::SolutionUserObject(), ActuallyExplicitEuler::solve(), FullSolveMultiApp::solveStep(), UserObject::spatialValue(), SphericalAverage::SphericalAverage(), SpiralAnnularMesh::SpiralAnnularMesh(), SpiralAnnularMeshGenerator::SpiralAnnularMeshGenerator(), StitchedMesh::StitchedMesh(), NodalUserObject::subdomainSetup(), GeneralUserObject::subdomainSetup(), Constraint::subdomainSetup(), Console::systemInfoFlags(), Terminator::Terminator(), TestSetupPostprocessorDataActionFunction::TestSetupPostprocessorDataActionFunction(), ThreadedGeneralUserObject::ThreadedGeneralUserObject(), ThreadedGeneralUserObject::threadJoin(), DiscreteElementUserObject::threadJoin(), GeneralUserObject::threadJoin(), TiledMeshGenerator::TiledMeshGenerator(), Function::timeDerivative(), TimeExtremeValue::TimeExtremeValue(), TimePeriod::TimePeriod(), VectorPostprocessorVisualizationAux::timestepSetup(), MultiAppCopyTransfer::transfer(), MultiAppMeshFunctionTransfer::transferVariable(), Transient::Transient(), TransientMultiApp::TransientMultiApp(), FEProblemBase::uDotDotOldRequested(), FEProblemBase::uDotOldRequested(), EqualValueBoundaryConstraint::updateConstrainedNodes(), SolutionUserObject::updateExodusBracketingTimeIndices(), Axisymmetric2D3DSolutionFunction::value(), ValueRangeMarker::ValueRangeMarker(), ValueThresholdMarker::ValueThresholdMarker(), MultiAppTransfer::variableIntegrityCheck(), VariableTimeIntegrationAux::VariableTimeIntegrationAux(), VectorNodalBC::VectorNodalBC(), VectorOfPostprocessors::VectorOfPostprocessors(), VectorPostprocessorFunction::VectorPostprocessorFunction(), MooseParsedGradFunction::vectorValue(), MooseParsedFunction::vectorValue(), VolumeHistogram::VolumeHistogram(), VTKOutput::VTKOutput(), DOFMapOutput::writeStreamToFile(), and Console::writeStreamToFile().

141  {
142  std::ostringstream oss;
143  moose::internal::mooseStreamAll(oss, std::forward<Args>(args)...);
144  std::string msg = oss.str();
145  callMooseErrorRaw(msg, &_app);
146  }
void mooseStreamAll(std::ostringstream &ss)
All of the following are not meant to be called directly - they are called by the normal macros (moos...
Definition: MooseError.C:87
void callMooseErrorRaw(std::string &msg, MooseApp *app)
Definition: MooseObject.C:57
MooseApp & _app
The MooseApp this object is associated with.
Definition: MooseObject.h:171

◆ mooseInfo()

template<typename... Args>
void MooseObject::mooseInfo ( Args &&...  args) const
inlineinherited

◆ mooseWarning()

template<typename... Args>
void MooseObject::mooseWarning ( Args &&...  args) const
inlineinherited

◆ name()

const std::string& MooseObject::name ( ) const
inlineinherited

Get the name of the object.

Returns
The name of the object

Definition at line 51 of file MooseObject.h.

Referenced by GridPartitioner::_do_partition(), FEProblemBase::addADJacobianMaterial(), FEProblemBase::addADResidualMaterial(), Executioner::addAttributeReporter(), DumpObjectsProblem::addAuxKernel(), FEProblemBase::addAuxKernel(), DumpObjectsProblem::addAuxScalarKernel(), FEProblemBase::addAuxScalarKernel(), DumpObjectsProblem::addBoundaryCondition(), FEProblemBase::addBoundaryCondition(), DumpObjectsProblem::addConstraint(), FEProblemBase::addConstraint(), FEProblemBase::addDamper(), DumpObjectsProblem::addDGKernel(), FEProblemBase::addDGKernel(), DumpObjectsProblem::addDiracKernel(), FEProblemBase::addDiracKernel(), FEProblemBase::addDistribution(), DumpObjectsProblem::addFunction(), FEProblemBase::addFunction(), FEProblemBase::addIndicator(), DumpObjectsProblem::addInitialCondition(), FEProblemBase::addInitialCondition(), DumpObjectsProblem::addInterfaceKernel(), FEProblemBase::addInterfaceKernel(), DumpObjectsProblem::addKernel(), FEProblemBase::addKernel(), FEProblemBase::addMarker(), DumpObjectsProblem::addMaterial(), FEProblemBase::addMaterial(), FEProblemBase::addMaterialHelper(), MooseMesh::addMortarInterface(), FEProblemBase::addMultiApp(), DumpObjectsProblem::addNodalKernel(), FEProblemBase::addNodalKernel(), FEProblemBase::addPostprocessor(), FEProblemBase::addPredictor(), FEProblemBase::addSampler(), DumpObjectsProblem::addScalarKernel(), FEProblemBase::addScalarKernel(), FEProblemBase::addTimeIntegrator(), FEProblemBase::addTransfer(), FEProblemBase::addUserObject(), FEProblemBase::addVectorPostprocessor(), Output::advancedExecuteOn(), AllSideSetsByNormalsGenerator::AllSideSetsByNormalsGenerator(), MultiApp::appPostprocessorValue(), MultiApp::appProblem(), MultiApp::appProblemBase(), MultiApp::appUserObjectBase(), DerivativeParsedMaterialHelper::assembleDerivatives(), AStableDirk4::AStableDirk4(), Function::average(), BreakMeshByBlockGenerator::BreakMeshByBlockGenerator(), ChangeOverTimePostprocessor::ChangeOverTimePostprocessor(), FEProblemBase::checkDependMaterialsHelper(), Damper::checkMinDamping(), Material::checkStatefulSanity(), CompositeFunction::CompositeFunction(), Material::computeSubdomainProperties(), VectorPostprocessorVisualizationAux::computeValue(), AuxKernel::coupledCallback(), AuxKernel::coupledDot(), AuxKernel::coupledDotDu(), MultiApp::createApp(), FEProblemBase::declareVectorPostprocessorVector(), DOFMapOutput::demangle(), DerivativeSumMaterial::DerivativeSumMaterial(), DGKernel::DGKernel(), DumpObjectsProblem::dumpObjectHelper(), ElementValueSampler::ElementValueSampler(), MooseMesh::errorIfDistributedMesh(), AB2PredictorCorrector::estimateTimeError(), SolutionUserObject::evalMeshFunction(), SolutionUserObject::evalMeshFunctionGradient(), SolutionUserObject::evalMultiValuedMeshFunction(), SolutionUserObject::evalMultiValuedMeshFunctionGradient(), MultiAppPostprocessorTransfer::execute(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), StatisticsVectorPostprocessor::execute(), MultiAppNearestNodeTransfer::execute(), PointValue::execute(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppScalarToAuxScalarTransfer::execute(), MultiAppVariableValueSampleTransfer::execute(), MultiAppMeshFunctionTransfer::execute(), MultiAppInterpolationTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppVectorPostprocessorTransfer::execute(), HistogramVectorPostprocessor::execute(), MultiAppCopyTransfer::execute(), Exodus::Exodus(), FileOutput::FileOutput(), MultiApp::fillPositions(), PointSamplerBase::finalize(), DerivativeParsedMaterialHelper::findMatPropDerivative(), FunctionDT::FunctionDT(), GeneralUserObject::GeneralUserObject(), LowerDBlockFromSidesetGenerator::generate(), StitchedMeshGenerator::generate(), Material::getADMaterialProperty(), MultiApp::getBoundingBox(), MooseObject::getCheckedPointerParam(), Control::getControllableParameterByName(), Control::getControllableValue(), Control::getControllableValueByName(), FEProblemBase::getDistribution(), MultiApp::getExecutioner(), OutputWarehouse::getFileNumbers(), FEProblemBase::getFunction(), SolutionUserObject::getLocalVarIndex(), Marker::getMarkerValue(), FEProblemBase::getMaterial(), NodalPatchRecovery::getMaterialProperty(), AuxKernel::getMaterialProperty(), Material::getMaterialProperty(), SubProblem::getMaterialPropertyBlockNames(), SubProblem::getMaterialPropertyBoundaryNames(), NodalPatchRecovery::getMaterialPropertyOld(), AuxKernel::getMaterialPropertyOld(), Material::getMaterialPropertyOld(), NodalPatchRecovery::getMaterialPropertyOlder(), AuxKernel::getMaterialPropertyOlder(), Material::getMaterialPropertyOlder(), MeshGenerator::getMesh(), MooseMesh::getMortarInterfaceByName(), OutputWarehouse::getOutput(), MooseObject::getParam(), GeneralUserObject::getPostprocessorValue(), AuxKernel::getPostprocessorValue(), FEProblemBase::getPostprocessorValue(), GeneralUserObject::getPostprocessorValueByName(), AuxKernel::getPostprocessorValueByName(), FEProblemBase::getPostprocessorValueOld(), FEProblemBase::getPostprocessorValueOlder(), FEProblemBase::getSampler(), AuxKernel::getScatterVectorPostprocessorValue(), FEProblemBase::getScatterVectorPostprocessorValue(), AuxKernel::getScatterVectorPostprocessorValueByName(), FEProblemBase::getScatterVectorPostprocessorValueOld(), Transient::getTimeStepperName(), AuxKernel::getUserObject(), InitialConditionBase::getUserObject(), FEProblemBase::getUserObject(), InitialConditionBase::getUserObjectBase(), AuxKernel::getUserObjectBase(), FEProblemBase::getUserObjectBase(), AuxKernel::getUserObjectByName(), InitialConditionBase::getUserObjectByName(), GeneralUserObject::getVectorPostprocessorValue(), AuxKernel::getVectorPostprocessorValue(), FEProblemBase::getVectorPostprocessorValue(), GeneralUserObject::getVectorPostprocessorValueByName(), AuxKernel::getVectorPostprocessorValueByName(), FEProblemBase::getVectorPostprocessorValueOld(), FEProblemBase::hasFunction(), AdvancedOutput::hasOutputHelper(), FEProblemBase::hasPostprocessor(), FEProblemBase::hasUserObject(), FEProblemBase::hasVectorPostprocessor(), FEProblemBase::init(), AdvancedOutput::initExecutionTypes(), AttribName::initFrom(), CSVReader::initialize(), StatisticsVectorPostprocessor::initialize(), HistogramVectorPostprocessor::initialize(), MultiAppProjectionTransfer::initialSetup(), DerivativeFunctionMaterialBase::initialSetup(), SolutionUserObject::initialSetup(), AdvancedOutput::initOutputList(), FEProblemBase::initPostprocessorData(), AdvancedOutput::initPostprocessorOrVectorPostprocessorLists(), Material::initStatefulProperties(), FEProblemBase::initVectorPostprocessorData(), Function::integral(), InterfaceKernel::InterfaceKernel(), MooseObject::isParamValid(), LinearCombinationFunction::LinearCombinationFunction(), Marker::Marker(), MatDiffusionBase< Real >::MatDiffusionBase(), MaterialDerivativeTestKernelBase< Real >::MaterialDerivativeTestKernelBase(), MaterialVectorPostprocessor::MaterialVectorPostprocessor(), Distribution::median(), MemoryUsageReporter::MemoryUsageReporter(), MeshSideSetGenerator::MeshSideSetGenerator(), ElementDeleterBase::modify(), MooseVariableInterface< Real >::MooseVariableInterface(), NearestPointBase< LayeredAverage >::NearestPointBase(), NodalValueSampler::NodalValueSampler(), NodalVariableValue::NodalVariableValue(), DOFMapOutput::output(), Output::Output(), AdvancedOutput::outputElementalVariables(), AdvancedOutput::outputInput(), AdvancedOutput::outputNodalVariables(), ConsoleUtils::outputOutputInformation(), Nemesis::outputPostprocessors(), Exodus::outputPostprocessors(), AdvancedOutput::outputPostprocessors(), AdvancedOutput::outputScalarVariables(), AdvancedOutput::outputSystemInformation(), AdvancedOutput::outputVectorPostprocessors(), ParsedAddSideset::ParsedAddSideset(), ParsedAux::ParsedAux(), ParsedGenerateSideset::ParsedGenerateSideset(), ParsedODEKernel::ParsedODEKernel(), ParsedSubdomainMeshGenerator::ParsedSubdomainMeshGenerator(), ParsedSubdomainMeshModifier::ParsedSubdomainMeshModifier(), PointSamplerBase::PointSamplerBase(), Registry::registerObjectsTo(), FEProblemBase::registerRandomInterface(), Material::resetQpProperties(), Sampler::Sampler(), ScalarComponentIC::ScalarComponentIC(), MooseMesh::setBoundaryName(), Control::setControllableValue(), Control::setControllableValueByName(), OutputWarehouse::setFileNumbers(), Exodus::setOutputDimension(), MooseMesh::setSubdomainName(), Split::setup(), TransientMultiApp::setupApp(), SideSetsFromNormalsGenerator::SideSetsFromNormalsGenerator(), SideSetsFromPointsGenerator::SideSetsFromPointsGenerator(), SideValueSampler::SideValueSampler(), TransientMultiApp::solveStep(), UserObject::spatialValue(), SphericalAverage::SphericalAverage(), StitchedMesh::StitchedMesh(), SubProblem::storeBoundaryDelayedCheckMatProp(), SubProblem::storeBoundaryMatPropName(), SubProblem::storeBoundaryZeroMatProp(), SubProblem::storeSubdomainDelayedCheckMatProp(), SubProblem::storeSubdomainMatPropName(), SubProblem::storeSubdomainZeroMatProp(), TaggingInterface::TaggingInterface(), ThreadedGeneralUserObject::ThreadedGeneralUserObject(), TiledMeshGenerator::TiledMeshGenerator(), Function::timeDerivative(), VectorPostprocessorVisualizationAux::timestepSetup(), TransientMultiApp::TransientMultiApp(), MultiAppTransfer::variableIntegrityCheck(), and AdvancedOutput::wantOutput().

51 { return _name; }
const std::string & _name
The name of this object, reference to value stored in InputParameters.
Definition: MooseObject.h:177

◆ order()

virtual int TimeIntegrator::order ( )
pure virtual

◆ paramError()

template<typename... Args>
void MooseObject::paramError ( const std::string &  param,
Args...  args 
)
inlineinherited

Emits an error prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseError - only printing a message using the given args.

Definition at line 100 of file MooseObject.h.

Referenced by ADKernel< compute_stage >::ADKernel(), DGKernel::DGKernel(), ElementValueSampler::ElementValueSampler(), IntegratedBC::IntegratedBC(), Kernel::Kernel(), NodalBC::NodalBC(), NodalEqualValueConstraint::NodalEqualValueConstraint(), NodalKernel::NodalKernel(), NodalValueSampler::NodalValueSampler(), RandomIC::RandomIC(), and MultiAppCopyTransfer::transfer().

101  {
102  auto prefix = param + ": ";
103  if (!_pars.inputLocation(param).empty())
104  prefix = _pars.inputLocation(param) + ": (" + _pars.paramFullpath(param) + "):\n";
105  mooseError(prefix, args...);
106  }
void mooseError(Args &&... args) const
Definition: MooseObject.h:140
const std::string & inputLocation(const std::string &param) const
Get/set a string representing the location in the input text the parameter originated from (i...
const InputParameters & _pars
Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.
Definition: MooseObject.h:168
const std::string & paramFullpath(const std::string &param) const
Get/set a string representing the full HIT parameter path from the input file (e.g.

◆ parameters()

const InputParameters& MooseObject::parameters ( ) const
inlineinherited

Get the parameters of the object.

Returns
The parameters of the object

Definition at line 57 of file MooseObject.h.

Referenced by FEProblemBase::addADJacobianMaterial(), FEProblemBase::addADResidualMaterial(), DumpObjectsProblem::addAuxKernel(), FEProblemBase::addAuxKernel(), DumpObjectsProblem::addAuxScalarKernel(), FEProblemBase::addAuxScalarKernel(), DumpObjectsProblem::addBoundaryCondition(), FEProblemBase::addBoundaryCondition(), DumpObjectsProblem::addConstraint(), FEProblemBase::addConstraint(), FEProblemBase::addDamper(), DumpObjectsProblem::addDGKernel(), FEProblemBase::addDGKernel(), DumpObjectsProblem::addDiracKernel(), FEProblemBase::addDiracKernel(), FEProblemBase::addDistribution(), DumpObjectsProblem::addFunction(), FEProblemBase::addFunction(), FEProblemBase::addIndicator(), DumpObjectsProblem::addInitialCondition(), FEProblemBase::addInitialCondition(), DumpObjectsProblem::addInterfaceKernel(), FEProblemBase::addInterfaceKernel(), DumpObjectsProblem::addKernel(), FEProblemBase::addKernel(), FEProblem::addLineSearch(), FEProblemBase::addMarker(), DumpObjectsProblem::addMaterial(), FEProblemBase::addMaterial(), FEProblemBase::addMaterialHelper(), FEProblemBase::addMultiApp(), DumpObjectsProblem::addNodalKernel(), FEProblemBase::addNodalKernel(), FEProblemBase::addOutput(), FEProblemBase::addPostprocessor(), FEProblemBase::addPredictor(), FEProblemBase::addSampler(), DumpObjectsProblem::addScalarKernel(), FEProblemBase::addScalarKernel(), FEProblemBase::addTimeIntegrator(), FEProblemBase::addTransfer(), FEProblemBase::addUserObject(), FEProblemBase::addVectorPostprocessor(), AdvancedOutput::AdvancedOutput(), assemble_l2(), Moose::assemble_matrix(), AuxKernel::AuxKernel(), AuxScalarKernel::AuxScalarKernel(), BoundsAux::BoundsAux(), LibmeshPartitioner::clone(), OversampleOutput::cloneMesh(), Moose::compute_bounds(), Moose::compute_jacobian(), Moose::compute_nearnullspace(), Moose::compute_nullspace(), Moose::compute_postcheck(), Moose::compute_transpose_nullspace(), Console::Console(), DumpObjectsProblem::deduceNecessaryParameters(), DumpObjectsProblem::dumpObjectHelper(), EigenProblem::EigenProblem(), Eigenvalue::Eigenvalue(), Executioner::Executioner(), Exodus::Exodus(), FEProblem::FEProblem(), GapValueAux::GapValueAux(), MooseObject::getCheckedPointerParam(), MooseMesh::init(), BlockRestrictable::initializeBlockRestrictable(), FEProblemBase::initNullSpaceVectors(), InterfaceKernel::InterfaceKernel(), isValid(), LayeredSideIntegral::LayeredSideIntegral(), MooseVariableInterface< Real >::MooseVariableInterface(), NearestPointBase< LayeredAverage >::NearestPointBase(), NodeFaceConstraint::NodeFaceConstraint(), PenetrationAux::PenetrationAux(), PiecewiseBilinear::PiecewiseBilinear(), PiecewiseLinearInterpolationMaterial::PiecewiseLinearInterpolationMaterial(), MultiAppProjectionTransfer::projectSolution(), RandomIC::RandomIC(), InputParameterWarehouse::removeInputParameters(), FEProblem::setInputParametersFEProblem(), FEProblemBase::setInputParametersFEProblem(), DumpObjectsProblem::stringifyParameters(), and Transient::Transient().

57 { return _pars; }
const InputParameters & _pars
Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.
Definition: MooseObject.h:168

◆ paramInfo()

template<typename... Args>
void MooseObject::paramInfo ( const std::string &  param,
Args...  args 
)
inlineinherited

Emits an informational message prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseInfo - only printing a message using the given args.

Definition at line 131 of file MooseObject.h.

132  {
133  auto prefix = param + ": ";
134  if (!_pars.inputLocation(param).empty())
135  prefix = _pars.inputLocation(param) + ": (" + _pars.paramFullpath(param) + "):\n";
136  mooseInfo(prefix, args...);
137  }
const std::string & inputLocation(const std::string &param) const
Get/set a string representing the location in the input text the parameter originated from (i...
const InputParameters & _pars
Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.
Definition: MooseObject.h:168
void mooseInfo(Args &&... args) const
Definition: MooseObject.h:161
const std::string & paramFullpath(const std::string &param) const
Get/set a string representing the full HIT parameter path from the input file (e.g.

◆ paramWarning()

template<typename... Args>
void MooseObject::paramWarning ( const std::string &  param,
Args...  args 
)
inlineinherited

Emits a warning prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseWarning - only printing a message using the given args.

Definition at line 115 of file MooseObject.h.

116  {
117  auto prefix = param + ": ";
118  if (!_pars.inputLocation(param).empty())
119  prefix = _pars.inputLocation(param) + ": (" + _pars.paramFullpath(param) + "):\n";
120  mooseWarning(prefix, args...);
121  }
void mooseWarning(Args &&... args) const
Definition: MooseObject.h:149
const std::string & inputLocation(const std::string &param) const
Get/set a string representing the location in the input text the parameter originated from (i...
const InputParameters & _pars
Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.
Definition: MooseObject.h:168
const std::string & paramFullpath(const std::string &param) const
Get/set a string representing the full HIT parameter path from the input file (e.g.

◆ postResidual()

virtual void TimeIntegrator::postResidual ( NumericVector< Number > &  )
inlinevirtual

Callback to the TimeIntegrator called immediately after the residuals are computed in NonlinearSystem::computeResidual().

The residual vector which is passed in to this function should be filled in by the user with the _Re_time and _Re_non_time vectors in a way that makes sense for the particular TimeIntegration method.

Reimplemented in ExplicitRK2, AStableDirk4, LStableDirk4, ExplicitTVDRK2, ImplicitMidpoint, LStableDirk3, LStableDirk2, ActuallyExplicitEuler, CrankNicolson, BDF2, ExplicitEuler, ImplicitEuler, and NewmarkBeta.

Definition at line 84 of file TimeIntegrator.h.

84 {}

◆ postSolve()

virtual void TimeIntegrator::postSolve ( )
inlinevirtual

Callback to the TimeIntegrator called immediately after TimeIntegrator::solve() (so the name does make sense!).

See e.g. CrankNicolson for an example of what can be done in the postSolve() callback – there it is used to move the residual from the "old" timestep forward in time to avoid recomputing it.

Definition at line 93 of file TimeIntegrator.h.

93 {}

◆ postStep()

virtual void TimeIntegrator::postStep ( )
inlinevirtual

Callback to the TimeIntegrator called at the very end of time step.

Reimplemented in CrankNicolson.

Definition at line 98 of file TimeIntegrator.h.

Referenced by Transient::endStep().

98 {}

◆ preSolve()

virtual void TimeIntegrator::preSolve ( )
inlinevirtual

Reimplemented in ExplicitRK2, ExplicitTVDRK2, ActuallyExplicitEuler, and ExplicitEuler.

Definition at line 68 of file TimeIntegrator.h.

68 {}

◆ preStep()

virtual void TimeIntegrator::preStep ( )
inlinevirtual

Reimplemented in BDF2.

Definition at line 69 of file TimeIntegrator.h.

69 {}

◆ solve()

void TimeIntegrator::solve ( )
virtual

Solves the time step and sets the number of nonlinear and linear iterations.

Reimplemented in ExplicitRK2, AStableDirk4, LStableDirk4, ExplicitTVDRK2, ImplicitMidpoint, LStableDirk3, LStableDirk2, and ActuallyExplicitEuler.

Definition at line 50 of file TimeIntegrator.C.

51 {
52  _nl.system().solve();
53 
56 }
NonlinearSystemBase & _nl
unsigned int _n_linear_iterations
Total number of linear iterations over all stages of the time step.
unsigned int getNumLinearIterationsLastSolve() const
Gets the number of linear iterations in the most recent solve.
virtual System & system() override
Get the reference to the libMesh system.
unsigned int _n_nonlinear_iterations
Total number of nonlinear iterations over all stages of the time step.
unsigned int getNumNonlinearIterationsLastSolve() const
Gets the number of nonlinear iterations in the most recent solve.

◆ type()

const std::string& MooseObject::type ( ) const
inlineinherited

Get the type of this object.

Returns
the name of the type of this object

Definition at line 45 of file MooseObject.h.

Referenced by DumpObjectsProblem::addAuxKernel(), DumpObjectsProblem::addAuxScalarKernel(), FEProblemBase::addAuxScalarVariable(), DumpObjectsProblem::addAuxVariable(), DisplacedProblem::addAuxVariable(), FEProblemBase::addAuxVariable(), DumpObjectsProblem::addBoundaryCondition(), DumpObjectsProblem::addConstraint(), DumpObjectsProblem::addDGKernel(), DumpObjectsProblem::addDiracKernel(), FEProblemBase::addDistribution(), DumpObjectsProblem::addFunction(), FEProblemBase::addFunction(), DumpObjectsProblem::addInitialCondition(), DumpObjectsProblem::addInterfaceKernel(), DumpObjectsProblem::addKernel(), DumpObjectsProblem::addMaterial(), DumpObjectsProblem::addNodalKernel(), FEProblemBase::addPredictor(), FEProblemBase::addSampler(), DumpObjectsProblem::addScalarKernel(), FEProblemBase::addScalarVariable(), PhysicsBasedPreconditioner::addSystem(), FEProblemBase::addTimeIntegrator(), DumpObjectsProblem::addVariable(), DisplacedProblem::addVariable(), FEProblemBase::addVariable(), FEProblemBase::advanceMultiApps(), FEProblemBase::backupMultiApps(), MooseMesh::buildRefinementAndCoarseningMaps(), FEProblemBase::computeAuxiliaryKernels(), ElemElemConstraint::computeElemNeighJacobian(), InterfaceKernel::computeElemNeighJacobian(), DGKernel::computeElemNeighJacobian(), ElemElemConstraint::computeElemNeighResidual(), InterfaceKernel::computeElemNeighResidual(), DGKernel::computeElemNeighResidual(), FEProblemBase::computeMultiAppsDT(), InterfaceKernel::computeOffDiagElemNeighJacobian(), DGKernel::computeOffDiagElemNeighJacobian(), DGConvection::computeQpJacobian(), CoupledTiedValueConstraint::computeQpJacobian(), TiedValueConstraint::computeQpJacobian(), DGDiffusion::computeQpJacobian(), LinearNodalConstraint::computeQpJacobian(), EqualValueBoundaryConstraint::computeQpJacobian(), EqualValueEmbeddedConstraint::computeQpJacobian(), CoupledTiedValueConstraint::computeQpOffDiagJacobian(), EqualValueEmbeddedConstraint::computeQpOffDiagJacobian(), DGConvection::computeQpResidual(), CoupledTiedValueConstraint::computeQpResidual(), TiedValueConstraint::computeQpResidual(), LinearNodalConstraint::computeQpResidual(), DGDiffusion::computeQpResidual(), EqualValueBoundaryConstraint::computeQpResidual(), EqualValueEmbeddedConstraint::computeQpResidual(), FEProblemBase::computeUserObjects(), DisplacedProblem::createQRules(), FEProblemBase::createQRules(), DumpObjectsProblem::deduceNecessaryParameters(), DumpObjectsProblem::dumpObjectHelper(), FEProblemBase::duplicateVariableCheck(), FEProblemBase::execMultiApps(), FEProblemBase::execMultiAppTransfers(), FEProblemBase::execTransfers(), FEProblemBase::finishMultiAppStep(), ElementSubdomainIDGenerator::generate(), ElementGenerator::getElemType(), FEProblemBase::getMaterial(), FEProblemBase::getMaterialData(), FEProblemBase::getTransfers(), AdvancedOutput::hasOutput(), FEProblemBase::incrementMultiAppTStep(), AdvancedOutput::initAvailableLists(), SolutionUserObject::initialSetup(), AdvancedOutput::initShowHideLists(), AssignElementSubdomainID::modify(), ControlOutput::output(), Gnuplot::output(), Exodus::output(), CSV::output(), Console::output(), Nemesis::output(), AdvancedOutput::output(), OversampleOutput::outputStep(), Output::outputStep(), FEProblemBase::outputStep(), FEProblemBase::restoreMultiApps(), FEProblemBase::setCoupling(), FileOutput::shouldOutput(), Output::shouldOutput(), AdvancedOutput::shouldOutput(), DisplacedProblem::updateGeomSearch(), FEProblemBase::updateGeomSearch(), and AdvancedOutput::wantOutput().

45 { return _type; }
const std::string & _type
The type of this object (the Class name)
Definition: MooseObject.h:174

Member Data Documentation

◆ _app

MooseApp& MooseObject::_app
protectedinherited

The MooseApp this object is associated with.

Definition at line 171 of file MooseObject.h.

Referenced by GridPartitioner::_do_partition(), AB2PredictorCorrector::AB2PredictorCorrector(), Executioner::addAttributeReporter(), FEProblemBase::addMaterialHelper(), FEProblemBase::addMultiApp(), FEProblemBase::addOutput(), FEProblemBase::allowOutput(), AStableDirk4::AStableDirk4(), AlgebraicRelationshipManager::attachAlgebraicFunctorHelper(), RelationshipManager::attachRelationshipManagers(), ElementSideNeighborLayers::attachRelationshipManagersInternal(), ElementPointNeighbors::attachRelationshipManagersInternal(), FileMesh::buildMesh(), MeshGeneratorMesh::buildMesh(), FEProblemBase::checkNonlinearConvergence(), OversampleOutput::cloneMesh(), FEProblemBase::computeJacobianTags(), FEProblemBase::computeResidualTags(), Console::Console(), TimeStepper::constrainStep(), MultiApp::createApp(), DumpObjectsProblem::dumpObjectHelper(), DumpObjectsProblem::dumpVariableHelper(), EigenExecutionerBase::EigenExecutionerBase(), EigenKernel::EigenKernel(), NonlinearEigen::execute(), InversePowerMethod::execute(), Transient::execute(), Steady::execute(), FileOutput::FileOutput(), FEProblemBase::forceOutput(), MeshGenerator::getMesh(), MeshGenerator::getMeshByName(), MooseObject::getMooseApp(), InversePowerMethod::init(), NonlinearEigen::init(), Transient::init(), Steady::init(), MooseMesh::init(), NumPicardIterations::initialize(), TimePeriod::initialSetup(), Console::initialSetup(), MultiApp::initialSetup(), FEProblemBase::initialSetup(), AdvancedOutput::initOutputList(), FEProblemBase::initPetscOutput(), AdvancedOutput::initPostprocessorOrVectorPostprocessorLists(), InversePowerMethod::InversePowerMethod(), MooseObject::mooseError(), MooseMesh::MooseMesh(), NonlinearEigen::NonlinearEigen(), EigenExecutionerBase::normalizeSolution(), PerfGraphOutput::output(), Tecplot::output(), Exodus::output(), Nemesis::output(), ControlOutput::outputActiveObjects(), ControlOutput::outputChangedControls(), ControlOutput::outputControls(), Exodus::outputEmptyTimestep(), Console::outputInput(), Exodus::outputInput(), Exodus::outputNodalVariables(), OversampleOutput::outputStep(), Output::outputStep(), FEProblemBase::outputStep(), Console::outputSystemInformation(), MultiApp::parentOutputPositionChanged(), PerformanceData::PerformanceData(), PetscOutput::petscLinearOutput(), PetscOutput::petscNonlinearOutput(), FEProblemBase::projectSolution(), FEProblemBase::setRestartFile(), TransientMultiApp::setupApp(), TimeSequenceStepperBase::setupSequence(), Transient::setupTimeIntegrator(), TransientMultiApp::solveStep(), FEProblemBase::subdomainSetup(), FEProblemBase::theWarehouse(), TimeExtremeValue::TimeExtremeValue(), TimePeriod::TimePeriod(), FEProblemBase::timestepSetup(), Transient::Transient(), and Console::write().

◆ _console

const ConsoleStream ConsoleStreamInterface::_console
inherited

An instance of helper class to write streams to the Console objects.

Definition at line 32 of file ConsoleStreamInterface.h.

Referenced by IterationAdaptiveDT::acceptStep(), SetupRecoverFileBaseAction::act(), Adaptivity::adaptMesh(), FEProblemBase::adaptMesh(), SimplePredictor::apply(), FEProblemBase::backupMultiApps(), FEProblemBase::checkProblemIntegrity(), IterationAdaptiveDT::computeAdaptiveDT(), Transient::computeConstrainedDT(), NonlinearSystemBase::computeDamping(), IterationAdaptiveDT::computeDT(), IterationAdaptiveDT::computeFailedDT(), IterationAdaptiveDT::computeInterpolationDT(), FEProblemBase::computeResidualTags(), IterationAdaptiveDT::constrainStep(), TimeStepper::constrainStep(), AB2PredictorCorrector::converged(), FEProblemBase::execMultiApps(), FEProblemBase::execMultiAppTransfers(), MultiAppPostprocessorTransfer::execute(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), MultiAppNearestNodeTransfer::execute(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppScalarToAuxScalarTransfer::execute(), MultiAppVariableValueSampleTransfer::execute(), MultiAppInterpolationTransfer::execute(), MultiAppMeshFunctionTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppVectorPostprocessorTransfer::execute(), MultiAppCopyTransfer::execute(), Steady::execute(), MultiAppDTKUserObjectTransfer::execute(), ActionWarehouse::executeActionsWithAction(), ActionWarehouse::executeAllActions(), FEProblemBase::FEProblemBase(), ElementQualityChecker::finalize(), FEProblemBase::finishMultiAppStep(), MultiApp::globalAppToLocal(), InversePowerMethod::init(), NonlinearEigen::init(), Steady::init(), FEProblemBase::initialAdaptMesh(), FEProblemBase::initialSetup(), EigenExecutionerBase::inversePowerIteration(), Transient::keepGoing(), IterationAdaptiveDT::limitDTByFunction(), IterationAdaptiveDT::limitDTToPostprocessorValue(), EigenExecutionerBase::makeBXConsistent(), Console::meshChanged(), MooseObject::mooseDeprecated(), MooseObject::mooseInfo(), MooseObject::mooseWarning(), PerfGraphOutput::output(), DOFMapOutput::output(), VariableResidualNormsDebugOutput::output(), Console::output(), ControlOutput::outputActiveObjects(), ControlOutput::outputChangedControls(), ControlOutput::outputControls(), Console::outputInput(), Console::outputPostprocessors(), Console::outputScalarVariables(), Console::outputSystemInformation(), FEProblemBase::possiblyRebuildGeomSearchPatches(), EigenExecutionerBase::postExecute(), ActionWarehouse::printActionDependencySets(), EigenExecutionerBase::printEigenvalue(), MaterialPropertyDebugOutput::printMaterialMap(), SolutionTimeAdaptiveDT::rejectStep(), DT2::rejectStep(), FEProblemBase::restoreMultiApps(), SimplePredictor::shouldApply(), NonlinearSystem::solve(), LStableDirk2::solve(), LStableDirk3::solve(), ImplicitMidpoint::solve(), ExplicitTVDRK2::solve(), LStableDirk4::solve(), AStableDirk4::solve(), ExplicitRK2::solve(), TransientMultiApp::solveStep(), Transient::solveStep(), DT2::step(), AB2PredictorCorrector::step(), NonlinearEigen::takeStep(), Console::writeTimestepInformation(), Console::writeVariableNorms(), and FEProblemBase::~FEProblemBase().

◆ _dt

Real& TimeIntegrator::_dt
protected

◆ _dt_old

Real& TimeIntegrator::_dt_old
protected

◆ _du_dot_du

Real& TimeIntegrator::_du_dot_du
protected

◆ _enabled

const bool& MooseObject::_enabled
protectedinherited

Reference to the "enable" InputParaemters, used by Controls for toggling on/off MooseObjects.

Definition at line 180 of file MooseObject.h.

Referenced by MooseObject::enabled().

◆ _fe_problem

FEProblemBase& TimeIntegrator::_fe_problem
protected

◆ _n_linear_iterations

unsigned int TimeIntegrator::_n_linear_iterations
protected

◆ _n_nonlinear_iterations

unsigned int TimeIntegrator::_n_nonlinear_iterations
protected

Total number of nonlinear iterations over all stages of the time step.

Definition at line 149 of file TimeIntegrator.h.

Referenced by getNumNonlinearIterations(), LStableDirk2::solve(), LStableDirk3::solve(), ImplicitMidpoint::solve(), ExplicitTVDRK2::solve(), AStableDirk4::solve(), LStableDirk4::solve(), ExplicitRK2::solve(), and solve().

◆ _name

const std::string& MooseObject::_name
protectedinherited

◆ _nl

NonlinearSystemBase& TimeIntegrator::_nl
protected

◆ _nonlinear_implicit_system

const NonlinearImplicitSystem* TimeIntegrator::_nonlinear_implicit_system
protected

Nonlinear implicit system, if applicable; otherwise, nullptr.

Definition at line 129 of file TimeIntegrator.h.

Referenced by getNumLinearIterationsLastSolve(), and getNumNonlinearIterationsLastSolve().

◆ _pars

const InputParameters& MooseObject::_pars
protectedinherited

◆ _Re_non_time

NumericVector<Number>& TimeIntegrator::_Re_non_time
protected

◆ _Re_time

NumericVector<Number>& TimeIntegrator::_Re_time
protected

◆ _solution

const NumericVector<Number>*& TimeIntegrator::_solution
protected

◆ _solution_old

const NumericVector<Number>& TimeIntegrator::_solution_old
protected

◆ _solution_older

const NumericVector<Number>& TimeIntegrator::_solution_older
protected

◆ _sys

SystemBase& TimeIntegrator::_sys
protected

◆ _t_step

int& TimeIntegrator::_t_step
protected

◆ _type

const std::string& MooseObject::_type
protectedinherited

The type of this object (the Class name)

Definition at line 174 of file MooseObject.h.

Referenced by FEProblemBase::init(), and MooseObject::type().


The documentation for this class was generated from the following files: