Copy variables directly from one application to another, based on degree-of-freedom indexing TODO: Rename to MultiAppVariableCopy or MultiAppFieldCopy. More...

#include <MultiAppCopyTransfer.h>

Inheritance diagram for MultiAppCopyTransfer:

[legend]

Public Types
enum	DIRECTION { TO_MULTIAPP, FROM_MULTIAPP, BETWEEN_MULTIAPP }

using	DataFileParameterType = DataFileName
	The parameter type this interface expects for a data file name. More...

Public Member Functions
	MultiAppCopyTransfer (const InputParameters &parameters)

virtual void	execute () override
	Performs the transfer of a variable (Nonlinear or Auxiliary) to/from the Multiapp. More...

void	initialSetup () override
	Method called at the beginning of the simulation for checking integrity or doing one-time setup. More...

void	variableIntegrityCheck (const AuxVariableName &var_name, bool is_from_multiapp) const
	Utility to verify that the variable in the destination system exists. More...

const std::shared_ptr< MultiApp >	getMultiApp () const
	Use this getter to obtain the MultiApp for transfers with a single direction. More...

const std::shared_ptr< MultiApp >	getFromMultiApp () const
	Get the MultiApp to transfer data from. More...

const std::shared_ptr< MultiApp >	getToMultiApp () const
	Get the MultiApp to transfer data to. More...

std::string	getFromName () const
	Get the name of thing being transferred from. More...

std::string	getToName () const
	Get the name of thing being transferred to. More...

bool	hasFromMultiApp () const
	Whether the transfer owns a non-null from_multi_app. More...

bool	hasToMultiApp () const
	Whether the transfer owns a non-null to_multi_app. More...

virtual void	getAppInfo ()
	This method will fill information into the convenience member variables (_to_problems, _from_meshes, etc.) More...

const MultiMooseEnum &	directions ()
	The directions this Transfer should be executed on. More...

void	setCurrentDirection (const int direction)
	Set this Transfer to be executed in a given direction. More...

virtual bool	enabled () const
	Return the enabled status of the object. More...

std::shared_ptr< MooseObject >	getSharedPtr ()
	Get another shared pointer to this object that has the same ownership group. More...

std::shared_ptr< const MooseObject >	getSharedPtr () const

MooseApp &	getMooseApp () const
	Get the MooseApp this class is associated with. More...

const std::string &	type () const
	Get the type of this class. More...

virtual const std::string &	name () const
	Get the name of the class. More...

std::string	typeAndName () const
	Get the class's combined type and name; useful in error handling. More...

std::string	errorPrefix (const std::string &error_type) const

void	callMooseError (std::string msg, const bool with_prefix) const
	Calls moose error with the message `msg`. More...

MooseObjectParameterName	uniqueParameterName (const std::string &parameter_name) const
	The unique parameter name of a valid parameter of this object for accessing parameter controls. More...

const InputParameters &	parameters () const
	Get the parameters of the object. More...

MooseObjectName	uniqueName () const
	The unique name for accessing input parameters of this object in the InputParameterWarehouse. More...

template<typename T >
const T &	getParam (const std::string &name) const
	Retrieve a parameter for the object. More...

template<typename T1 , typename T2 >
std::vector< std::pair< T1, T2 > >	getParam (const std::string &param1, const std::string &param2) const
	Retrieve two parameters and provide pair of parameters for the object. More...

template<typename T >
const T *	queryParam (const std::string &name) const
	Query a parameter for the object. More...

template<typename T >
const T &	getRenamedParam (const std::string &old_name, const std::string &new_name) const
	Retrieve a renamed parameter for the object. More...

template<typename T >
T	getCheckedPointerParam (const std::string &name, const std::string &error_string="") const
	Verifies that the requested parameter exists and is not NULL and returns it to the caller. More...

bool	isParamValid (const std::string &name) const
	Test if the supplied parameter is valid. More...

bool	isParamSetByUser (const std::string &nm) const
	Test if the supplied parameter is set by a user, as opposed to not set or set to default. More...

template<typename... Args>
void	paramError (const std::string &param, Args... args) const
	Emits an error prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...

template<typename... Args>
void	paramWarning (const std::string &param, Args... args) const
	Emits a warning prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...

template<typename... Args>
void	paramInfo (const std::string &param, Args... args) const
	Emits an informational message prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...

void	connectControllableParams (const std::string &parameter, const std::string &object_type, const std::string &object_name, const std::string &object_parameter) const
	Connect controllable parameter of this action with the controllable parameters of the objects added by this action. More...

template<typename... Args>
void	mooseError (Args &&... args) const
	Emits an error prefixed with object name and type. More...

template<typename... Args>
void	mooseErrorNonPrefixed (Args &&... args) const
	Emits an error without the prefixing included in mooseError(). More...

template<typename... Args>
void	mooseDocumentedError (const std::string &repo_name, const unsigned int issue_num, Args &&... args) const
	Emits a documented error with object name and type. More...

template<typename... Args>
void	mooseWarning (Args &&... args) const
	Emits a warning prefixed with object name and type. More...

template<typename... Args>
void	mooseWarningNonPrefixed (Args &&... args) const
	Emits a warning without the prefixing included in mooseWarning(). More...

template<typename... Args>
void	mooseDeprecated (Args &&... args) const

template<typename... Args>
void	mooseInfo (Args &&... args) const

const Parallel::Communicator &	comm () const

processor_id_type	n_processors () const

processor_id_type	processor_id () const

std::string	getDataFileName (const std::string &param) const
	Deprecated method. More...

std::string	getDataFileNameByName (const std::string &relative_path) const
	Deprecated method. More...

std::string	getDataFilePath (const std::string &relative_path) const
	Returns the path of a data file for a given relative file path. More...

virtual void	timestepSetup ()
	Gets called at the beginning of the timestep before this object is asked to do its job. More...

virtual void	jacobianSetup ()
	Gets called just before the Jacobian is computed and before this object is asked to do its job. More...

virtual void	residualSetup ()
	Gets called just before the residual is computed and before this object is asked to do its job. More...

virtual void	subdomainSetup ()
	Gets called when the subdomain changes (i.e. More...

virtual void	customSetup (const ExecFlagType &)
	Gets called in FEProblemBase::execute() for execute flags other than initial, timestep_begin, nonlinear, linear and subdomain. More...

const ExecFlagEnum &	getExecuteOnEnum () const
	Return the execute on MultiMooseEnum for this object. More...

PerfGraph &	perfGraph ()
	Get the PerfGraph. More...


MooseEnum	direction ()

MooseEnum	currentDirection ()

Static Public Member Functions
static InputParameters	validParams ()

static void	addSkipCoordCollapsingParam (InputParameters &params)
	Add the option to skip coordinate collapsing in coordinate transformation operations. More...

static libMesh::System *	find_sys (libMesh::EquationSystems &es, const std::string &var_name)
	Small helper function for finding the system containing the variable. More...

static std::string	possibleDirections ()
	Used to construct InputParameters. More...

Public Attributes
const ConsoleStream	_console
	An instance of helper class to write streams to the Console objects. More...

Static Public Attributes
static const libMesh::Number	OutOfMeshValue = -999999

Protected Member Functions
virtual std::vector< VariableName >	getFromVarNames () const override
	Virtual function defining variables to be transferred. More...

virtual std::vector< AuxVariableName >	getToVarNames () const override
	Virtual function defining variables to transfer to. More...

void	transfer (FEProblemBase &to_problem, FEProblemBase &from_problem)
	Performs the transfer of a variable between two problems if they have the same mesh. More...

void	transferDofObject (libMesh::DofObject to_object, libMesh::DofObject from_object, MooseVariableFieldBase &to_var, MooseVariableFieldBase &from_var, NumericVector< Number > &to_solution, NumericVector< Number > &from_solution)
	Performs the transfer of values between a node or element. More...

libMesh::EquationSystems &	getEquationSystem (FEProblemBase &problem, bool use_displaced) const
	Returns the Problem's equation system, displaced or not Be careful! If you transfer TO a displaced system you will likely need a synchronization So most transfers reach the non-displaced system directly. More...

std::vector< unsigned int >	getFromsPerProc ()
	Return the number of "from" domains that each processor owns. More...

libMesh::NumericVector< Real > &	getTransferVector (unsigned int i_local, std::string var_name)
	If we are transferring to a multiapp, return the appropriate solution vector. More...

unsigned int	getGlobalSourceAppIndex (unsigned int i_from) const
	Return the global app index from the local index in the "from-multiapp" transfer direction. More...

unsigned int	getGlobalTargetAppIndex (unsigned int i_to) const
	Return the global app index from the local index in the "to-multiapp" transfer direction. More...

unsigned int	getLocalSourceAppIndex (unsigned int i_from) const
	Return the local app index from the global index in the "from-multiapp" transfer direction We use the fact that global app indexes are consecutive on a given rank. More...

void	errorIfObjectExecutesOnTransferInSourceApp (const std::string &object_name) const
	Error if executing this MooseObject on EXEC_TRANSFER in a source multiapp (from_multiapp, e.g. More...

Point	getPointInTargetAppFrame (const Point &p, unsigned int local_i_to, const std::string &phase) const
	Get the target app point from a point in the reference frame. More...

void	checkMultiAppExecuteOn ()
	Helper method for checking the 'check_multiapp_execute_on' flag. More...

void	checkVariable (const FEProblemBase &fe_problem, const VariableName &var_name, const std::string &param_name="") const
	Helper for checking a problem for a variable. More...

void	extendBoundingBoxes (const Real factor, std::vector< libMesh::BoundingBox > &bboxes) const
	Extends bounding boxes to avoid missing points. More...

template<typename T , typename... Args>
T &	declareRestartableData (const std::string &data_name, Args &&... args)
	Declare a piece of data as "restartable" and initialize it. More...

template<typename T , typename... Args>
ManagedValue< T >	declareManagedRestartableDataWithContext (const std::string &data_name, void *context, Args &&... args)
	Declares a piece of "managed" restartable data and initialize it. More...

template<typename T , typename... Args>
const T &	getRestartableData (const std::string &data_name) const
	Declare a piece of data as "restartable" and initialize it Similar to `declareRestartableData` but returns a const reference to the object. More...

template<typename T , typename... Args>
T &	declareRestartableDataWithContext (const std::string &data_name, void *context, Args &&... args)
	Declare a piece of data as "restartable" and initialize it. More...

template<typename T , typename... Args>
T &	declareRecoverableData (const std::string &data_name, Args &&... args)
	Declare a piece of data as "recoverable" and initialize it. More...

template<typename T , typename... Args>
T &	declareRestartableDataWithObjectName (const std::string &data_name, const std::string &object_name, Args &&... args)
	Declare a piece of data as "restartable". More...

template<typename T , typename... Args>
T &	declareRestartableDataWithObjectNameWithContext (const std::string &data_name, const std::string &object_name, void *context, Args &&... args)
	Declare a piece of data as "restartable". More...

std::string	restartableName (const std::string &data_name) const
	Gets the name of a piece of restartable data given a data name, adding the system name and object name prefix. More...

PerfID	registerTimedSection (const std::string &section_name, const unsigned int level) const
	Call to register a named section for timing. More...

PerfID	registerTimedSection (const std::string &section_name, const unsigned int level, const std::string &live_message, const bool print_dots=true) const
	Call to register a named section for timing. More...

std::string	timedSectionName (const std::string &section_name) const


std::vector< libMesh::BoundingBox >	getFromBoundingBoxes ()
	Return the bounding boxes of all the "from" domains, including all the domains not local to this processor. More...

std::vector< libMesh::BoundingBox >	getFromBoundingBoxes (BoundaryID boundary_id)

Static Protected Member Functions
static void	addBBoxFactorParam (InputParameters &params)
	Add the bounding box factor parameter to the supplied input parameters. More...

static void	transformBoundingBox (libMesh::BoundingBox &box, const MultiAppCoordTransform &transform)
	Transform a bounding box according to the transformations in the provided coordinate transformation object. More...

Protected Attributes
const std::vector< VariableName >	_from_var_names
	Name of variables transferring from. More...

const std::vector< AuxVariableName >	_to_var_names
	Name of variables transferring to. More...

VariableName	_from_var_name
	Name of variables transferring from. More...

AuxVariableName	_to_var_name
	Name of variables transferring to. More...

const bool	_has_block_restrictions
	Whether block restriction is active. More...

std::set< SubdomainID >	_from_blocks
	Subdomain IDs of the blocks to transfer from. More...

std::set< SubdomainID >	_to_blocks
	Subdomain IDs of the blocks to transfer to. More...

std::shared_ptr< MultiApp >	_multi_app
	Deprecated class attribute for compatibility with the apps. More...

std::vector< FEProblemBase * >	_to_problems

std::vector< FEProblemBase * >	_from_problems

std::vector< libMesh::EquationSystems * >	_to_es

std::vector< libMesh::EquationSystems * >	_from_es

std::vector< MooseMesh * >	_to_meshes

std::vector< MooseMesh * >	_from_meshes

std::vector< Point >	_to_positions

std::vector< Point >	_from_positions

std::vector< std::unique_ptr< MultiAppCoordTransform > >	_to_transforms

std::vector< std::unique_ptr< MultiAppCoordTransform > >	_from_transforms

const bool	_skip_coordinate_collapsing
	Whether to skip coordinate collapsing (transformations of coordinates between applications using different frames of reference) More...

bool	_displaced_source_mesh
	True if displaced mesh is used for the source mesh, otherwise false. More...

bool	_displaced_target_mesh
	True if displaced mesh is used for the target mesh, otherwise false. More...

Real	_bbox_factor
	Extend (or contract) bounding box by a factor in all directions Greater than one values of this member may be necessary because the nearest bounding box does not necessarily give you the closest node/element. More...

std::vector< unsigned int >	_to_local2global_map
	Given local app index, returns global app index. More...

std::vector< unsigned int >	_from_local2global_map
	Given local app index, returns global app index. More...

SubProblem &	_subproblem

FEProblemBase &	_fe_problem

SystemBase &	_sys

THREAD_ID	_tid

MultiMooseEnum	_directions
	The directions this Transfer is to be executed on. More...

const bool &	_enabled
	Reference to the "enable" InputParameters, used by Controls for toggling on/off MooseObjects. More...

MooseApp &	_app
	The MOOSE application this is associated with. More...

const std::string	_type
	The type of this class. More...

const std::string	_name
	The name of this class. More...

const InputParameters &	_pars
	Parameters of this object, references the InputParameters stored in the InputParametersWarehouse. More...

Factory &	_factory
	The Factory associated with the MooseApp. More...

ActionFactory &	_action_factory
	Builds Actions. More...

const Parallel::Communicator &	_communicator

const ExecFlagEnum &	_execute_enum
	Execute settings for this object. More...

const ExecFlagType &	_current_execute_flag
	Reference to FEProblemBase. More...

MooseApp &	_restartable_app
	Reference to the application. More...

const std::string	_restartable_system_name
	The system name this object is in. More...

const THREAD_ID	_restartable_tid
	The thread ID for this object. More...

const bool	_restartable_read_only
	Flag for toggling read only status (see ReporterData) More...

MooseApp &	_pg_moose_app
	The MooseApp that owns the PerfGraph. More...

const std::string	_prefix
	A prefix to use for all sections. More...


MooseEnum	_direction

MooseEnum	_current_direction

Private Member Functions
virtual void	checkSiblingsTransferSupported () const override
	Whether the transfer supports siblings transfer. More...

Detailed Description

Copy variables directly from one application to another, based on degree-of-freedom indexing TODO: Rename to MultiAppVariableCopy or MultiAppFieldCopy.

Definition at line 23 of file MultiAppCopyTransfer.h.

Member Typedef Documentation

◆ DataFileParameterType

using DataFileInterface::DataFileParameterType = DataFileName

inherited

The parameter type this interface expects for a data file name.

Definition at line 27 of file DataFileInterface.h.

Member Enumeration Documentation

◆ DIRECTION

enum Transfer::DIRECTION

inherited

Enumerator
TO_MULTIAPP
FROM_MULTIAPP
BETWEEN_MULTIAPP

Definition at line 68 of file Transfer.h.

   {
     TO_MULTIAPP,
     FROM_MULTIAPP,
     BETWEEN_MULTIAPP
   };

Constructor & Destructor Documentation

◆ MultiAppCopyTransfer()

MultiAppCopyTransfer::MultiAppCopyTransfer ( const InputParameters & parameters )

Definition at line 35 of file MultiAppCopyTransfer.C.

   : MultiAppDofCopyTransfer(parameters),
     _from_var_names(getParam<std::vector<VariableName>>("source_variable")),
     _to_var_names(getParam<std::vector<AuxVariableName>>("variable"))
 {
   /* Right now, most of derived transfers support one variable only */
   _to_var_name = _to_var_names.size() ? _to_var_names[0] : "INVALID";
   _from_var_name = _from_var_names.size() ? _from_var_names[0] : "INVALID";
 }

Member Function Documentation

◆ addBBoxFactorParam()

void MultiAppTransfer::addBBoxFactorParam ( InputParameters & params )

staticprotectedinherited

Add the bounding box factor parameter to the supplied input parameters.

Definition at line 58 of file MultiAppTransfer.C.

Referenced by MultiAppShapeEvaluationTransfer::validParams(), MultiAppProjectionTransfer::validParams(), and MultiAppNearestNodeTransfer::validParams().

 {
   params.addRangeCheckedParam<Real>(
       "bbox_factor",
       1 + TOLERANCE,
       "bbox_factor>0",
       "Multiply bounding box width (in all directions) by the prescribed factor. Values less than "
       "1 will shrink the bounding box; values greater than 1 will enlarge the bounding box. It is "
       "generally not advised to ever shrink the bounding box. On the other hand it may be helpful "
       "to enlarge the bounding box. Larger bounding boxes will lead to more accurate determination "
       "of the closest node/element with the tradeoff of more communication.");
 }

◆ addSkipCoordCollapsingParam()

void MultiAppTransfer::addSkipCoordCollapsingParam ( InputParameters & params )

staticinherited

Add the option to skip coordinate collapsing in coordinate transformation operations.

Definition at line 72 of file MultiAppTransfer.C.

Referenced by MultiAppTransfer::validParams().

 {
   params.addParam<bool>(
       "skip_coordinate_collapsing",
       true,
       "Whether to skip coordinate collapsing (translation and rotation are still performed, only "
       "XYZ, RZ etc collapsing is skipped) when performing mapping and inverse "
       "mapping coordinate transformation operations. This parameter should only "
       "be set by users who really know what they're doing.");
   params.addParamNamesToGroup("skip_coordinate_collapsing", "Advanced");
 }

◆ callMooseError()

void MooseBase::callMooseError	(	std::string	msg,
		const bool	with_prefix
	)		const

inherited

Calls moose error with the message msg.

Will prefix the message with the subapp name if one exists.

If with_prefix, then add the prefix from errorPrefix() to the error.

Definition at line 33 of file MooseBase.C.

Referenced by InputParameters::callMooseErrorHelper(), MooseBaseErrorInterface::mooseDocumentedError(), MooseBaseErrorInterface::mooseError(), MooseBaseErrorInterface::mooseErrorNonPrefixed(), and MooseBaseParameterInterface::paramError().

 {
   _app.getOutputWarehouse().mooseConsole();
   const std::string prefix = _app.isUltimateMaster() ? "" : _app.name();
   if (with_prefix)
     msg = errorPrefix("error") + msg;
   moose::internal::mooseErrorRaw(msg, prefix);
 }

◆ checkMultiAppExecuteOn()

void MultiAppTransfer::checkMultiAppExecuteOn ( )

protectedinherited

Helper method for checking the 'check_multiapp_execute_on' flag.

This method was added to allow the check to be delayed by child classes, see StochasticToolsTransfer for an example.

Definition at line 162 of file MultiAppTransfer.C.

Referenced by MultiAppTransfer::MultiAppTransfer().

 {
   if (_from_multi_app && !_to_multi_app)
     if (getExecuteOnEnum() != _from_multi_app->getExecuteOnEnum())
       mooseDoOnce(
           mooseWarning("MultiAppTransfer execute_on flags do not match associated from_multi_app "
                        "execute_on flags"));
 
   if (_to_multi_app && !_from_multi_app)
     if (getExecuteOnEnum() != _to_multi_app->getExecuteOnEnum())
       mooseDoOnce(
           mooseWarning("MultiAppTransfer execute_on flags do not match associated to_multi_app "
                        "execute_on flags"));
 
   // In the case of siblings transfer, the check will be looser
   if (_from_multi_app && _to_multi_app)
     if (getExecuteOnEnum() != _from_multi_app->getExecuteOnEnum() &&
         getExecuteOnEnum() != _to_multi_app->getExecuteOnEnum())
       mooseDoOnce(
           mooseWarning("MultiAppTransfer execute_on flags do not match associated to_multi_app "
                        "and from_multi_app execute_on flags"));
 }

◆ checkSiblingsTransferSupported()

void MultiAppCopyTransfer::checkSiblingsTransferSupported ( ) const

overrideprivatevirtual

Whether the transfer supports siblings transfer.

Reimplemented from MultiAppTransfer.

Definition at line 87 of file MultiAppCopyTransfer.C.

 {
   // Check that we are in the supported configuration: same number of source and target apps
   // The allocation of the child apps on the processors must be the same
   if (getFromMultiApp()->numGlobalApps() == getToMultiApp()->numGlobalApps())
   {
     for (const auto i : make_range(getToMultiApp()->numGlobalApps()))
       if (getFromMultiApp()->hasLocalApp(i) + getToMultiApp()->hasLocalApp(i) == 1)
         mooseError("Child application allocation on parallel processes must be the same to support "
                    "siblings variable field copy transfer");
   }
   else
     mooseError("Number of source and target child apps must match for siblings transfer");
 }

◆ checkVariable()

void MultiAppTransfer::checkVariable	(	const FEProblemBase &	fe_problem,
		const VariableName &	var_name,
		const std::string &	param_name = `""`
	)		const

protectedinherited

Helper for checking a problem for a variable.

Parameters

fe_problem	The problem that should contain the variable
var_name	The name of the variable that should exist within the problem
param_name	(optional) The input file parameter name for throwing paramError, if not provided a mooseError is thrown.

Definition at line 602 of file MultiAppTransfer.C.

Referenced by MultiAppDofCopyTransfer::transfer().

 {
   if (!fe_problem.hasVariable(var_name))
   {
     if (param_name.empty())
       mooseError("The variable '", var_name, "' does not exist.");
     else
       paramError(param_name, "The variable '", var_name, "' does not exist.");
   }
 }

◆ connectControllableParams()

void MooseBaseParameterInterface::connectControllableParams	(	const std::string &	parameter,
		const std::string &	object_type,
		const std::string &	object_name,
		const std::string &	object_parameter
	)		const

inherited

Connect controllable parameter of this action with the controllable parameters of the objects added by this action.

Parameters

parameter	Name of the controllable parameter of this action
object_type	Type of the object added by this action.
object_name	Name of the object added by this action.
object_parameter	Name of the parameter of the object.

Definition at line 33 of file MooseBaseParameterInterface.C.

 {
   MooseObjectParameterName primary_name(uniqueName(), parameter);
   const auto base_type = _factory.getValidParams(object_type).get<std::string>("_moose_base");
   MooseObjectParameterName secondary_name(base_type, object_name, object_parameter);
   _moose_base.getMooseApp().getInputParameterWarehouse().addControllableParameterConnection(
       primary_name, secondary_name);
 
   const auto & tags = _pars.get<std::vector<std::string>>("control_tags");
   for (const auto & tag : tags)
   {
     if (!tag.empty())
     {
       // Only adds the parameter with the different control tags if the derived class
       // properly registers the parameter to its own syntax
       MooseObjectParameterName tagged_name(tag, _moose_base.name(), parameter);
       _moose_base.getMooseApp().getInputParameterWarehouse().addControllableParameterConnection(
           tagged_name, secondary_name, /*error_on_empty=*/false);
     }
   }
 }

◆ currentDirection()

MooseEnum Transfer::currentDirection ( )

inlineinherited

Definition at line 85 of file Transfer.h.

85 { return _current_direction; }

Transfer::_current_direction

MooseEnum _current_direction

Definition: Transfer.h:106

◆ customSetup()

virtual void SetupInterface::customSetup ( const ExecFlagType & )

inlinevirtualinherited

Gets called in FEProblemBase::execute() for execute flags other than initial, timestep_begin, nonlinear, linear and subdomain.

Reimplemented in Function.

Definition at line 61 of file SetupInterface.h.

61 {}

◆ declareManagedRestartableDataWithContext()

template<typename T , typename... Args>

Restartable::ManagedValue< T > Restartable::declareManagedRestartableDataWithContext	(	const std::string &	data_name,
		void *	context,
		Args &&...	args
	)

protectedinherited

Declares a piece of "managed" restartable data and initialize it.

Here, "managed" restartable data means that the caller can destruct this data upon destruction of the return value of this method. Therefore, this ManagedValue<T> wrapper should survive after the final calls to dataStore() for it. That is... at the very end.

This is needed for objects whose destruction ordering is important, and enables natural c++ destruction in reverse construction order of the object that declares it.

See delcareRestartableData and declareRestartableDataWithContext for more information.

Definition at line 276 of file Restartable.h.

 {
   auto & data_ptr =
       declareRestartableDataHelper<T>(data_name, context, std::forward<Args>(args)...);
   return Restartable::ManagedValue<T>(data_ptr);
 }

◆ declareRecoverableData()

template<typename T , typename... Args>

T & Restartable::declareRecoverableData	(	const std::string &	data_name,
		Args &&...	args
	)

protectedinherited

Declare a piece of data as "recoverable" and initialize it.

This means that in the event of a restart this piece of data will be restored back to its previous value.

Note - this data will NOT be restored on Restart!

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters

data_name	The name of the data (usually just use the same name as the member variable)
args	Arguments to forward to the constructor of the data

Definition at line 351 of file Restartable.h.

 {
   const auto full_name = restartableName(data_name);
 
   registerRestartableNameWithFilterOnApp(full_name, Moose::RESTARTABLE_FILTER::RECOVERABLE);
 
   return declareRestartableDataWithContext<T>(data_name, nullptr, std::forward<Args>(args)...);
 }

◆ declareRestartableData()

template<typename T , typename... Args>

T & Restartable::declareRestartableData	(	const std::string &	data_name,
		Args &&...	args
	)

protectedinherited

Declare a piece of data as "restartable" and initialize it.

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters

data_name	The name of the data (usually just use the same name as the member variable)
args	Arguments to forward to the constructor of the data

Definition at line 269 of file Restartable.h.

 {
   return declareRestartableDataWithContext<T>(data_name, nullptr, std::forward<Args>(args)...);
 }

◆ declareRestartableDataWithContext()

template<typename T , typename... Args>

T & Restartable::declareRestartableDataWithContext	(	const std::string &	data_name,
		void *	context,
		Args &&...	args
	)

protectedinherited

Declare a piece of data as "restartable" and initialize it.

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters

data_name	The name of the data (usually just use the same name as the member variable)
context	Context pointer that will be passed to the load and store functions
args	Arguments to forward to the constructor of the data

Definition at line 294 of file Restartable.h.

 {
   return declareRestartableDataHelper<T>(data_name, context, std::forward<Args>(args)...).set();
 }

◆ declareRestartableDataWithObjectName()

template<typename T , typename... Args>

T & Restartable::declareRestartableDataWithObjectName	(	const std::string &	data_name,
		const std::string &	object_name,
		Args &&...	args
	)

protectedinherited

Declare a piece of data as "restartable".

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters

data_name	The name of the data (usually just use the same name as the member variable)
object_name	A supplied name for the object that is declaring this data.
args	Arguments to forward to the constructor of the data

Definition at line 323 of file Restartable.h.

 {
   return declareRestartableDataWithObjectNameWithContext<T>(
       data_name, object_name, nullptr, std::forward<Args>(args)...);
 }

◆ declareRestartableDataWithObjectNameWithContext()

template<typename T , typename... Args>

T & Restartable::declareRestartableDataWithObjectNameWithContext	(	const std::string &	data_name,
		const std::string &	object_name,
		void *	context,
		Args &&...	args
	)

protectedinherited

Declare a piece of data as "restartable".

This means that in the event of a restart this piece of data will be restored back to its previous value.

NOTE: This returns a reference! Make sure you store it in a reference!

Parameters

data_name	The name of the data (usually just use the same name as the member variable)
object_name	A supplied name for the object that is declaring this data.
context	Context pointer that will be passed to the load and store functions
args	Arguments to forward to the constructor of the data

Definition at line 333 of file Restartable.h.

 {
   std::string old_name = _restartable_name;
 
   _restartable_name = object_name;
 
   T & value = declareRestartableDataWithContext<T>(data_name, context, std::forward<Args>(args)...);
 
   _restartable_name = old_name;
 
   return value;
 }

◆ direction()

MooseEnum Transfer::direction ( )

inlineinherited

The current direction that this Transfer is going in. direction() is to be deprecated for currentDirection()

Definition at line 84 of file Transfer.h.

Referenced by Transfer::setCurrentDirection().

84 { return _direction; }

Transfer::_direction

MooseEnum _direction

Definition: Transfer.h:105

◆ directions()

const MultiMooseEnum& Transfer::directions ( )

inlineinherited

The directions this Transfer should be executed on.

Definition at line 79 of file Transfer.h.

79 { return _directions; }

Transfer::_directions

MultiMooseEnum _directions

The directions this Transfer is to be executed on.

Definition: Transfer.h:110

◆ enabled()

virtual bool MooseObject::enabled ( ) const

inlinevirtualinherited

Return the enabled status of the object.

Reimplemented in EigenKernel.

Definition at line 40 of file MooseObject.h.

Referenced by EigenKernel::enabled().

40 { return _enabled; }

MooseObject::_enabled

const bool & _enabled

Reference to the "enable" InputParameters, used by Controls for toggling on/off MooseObjects.

Definition: MooseObject.h:51

◆ errorIfObjectExecutesOnTransferInSourceApp()

void MultiAppTransfer::errorIfObjectExecutesOnTransferInSourceApp ( const std::string & object_name ) const

protectedinherited

Error if executing this MooseObject on EXEC_TRANSFER in a source multiapp (from_multiapp, e.g.

child/sibling app). Note that, conversely, when the parent app is the source application, it is usually desired to use EXEC_TRANSFER for a MooseObject that provides the values to transfer.

Parameters

object_name name of the object to check the execute_on flags for

Definition at line 661 of file MultiAppTransfer.C.

Referenced by MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppPostprocessorTransfer::execute(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppGeneralFieldUserObjectTransfer::execute(), MultiAppUserObjectTransfer::execute(), and MultiAppVectorPostprocessorTransfer::executeFromMultiapp().

 {
   // parent app is the source app, EXEC_TRANSFER is fine
   if (!hasFromMultiApp())
     return;
   // Get the app and problem
   const auto & app = getFromMultiApp();
   if (!app->hasApp())
     return;
   const auto & problem = app->appProblemBase(app->firstLocalApp());
   // Use the warehouse to find the object
   std::vector<SetupInterface *> objects_with_exec_on;
   problem.theWarehouse()
       .query()
       .template condition<AttribName>(object_name)
       .template condition<AttribExecOns>(EXEC_TRANSFER)
       .queryInto(objects_with_exec_on);
   if (objects_with_exec_on.size())
     mooseError("Object '" + object_name +
                "' should not be executed on EXEC_TRANSFER, because this transfer has "
                "indicated it does not support it.\nExecuting this object on TIMESTEP_END should be "
                "sufficient to get updated values.");
 }

◆ errorPrefix()

std::string MooseBase::errorPrefix ( const std::string & error_type ) const

inherited

Returns: A prefix to be used in errors that contains the input file location associated with this object (if any) and the name and type of the object.

Definition at line 43 of file MooseBase.C.

Referenced by MooseBase::callMooseError(), MooseBaseErrorInterface::mooseDeprecated(), MooseBaseErrorInterface::mooseInfo(), MooseBaseErrorInterface::mooseWarning(), and MooseBaseParameterInterface::paramErrorMsg().

 {
   std::stringstream oss;
   if (const auto node = _params.getHitNode())
     if (!node->isRoot())
       oss << node->fileLocation() << ":\n";
   oss << "The following " << error_type << " occurred in the ";
   if (const auto base_ptr = _params.getBase())
     oss << *base_ptr;
   else
     oss << "object";
   oss << " '" << name() << "' of type " << type() << ".\n\n";
   return oss.str();
 }

◆ execute()

void MultiAppCopyTransfer::execute ( )

overridevirtual

Performs the transfer of a variable (Nonlinear or Auxiliary) to/from the Multiapp.

Implements Transfer.

Definition at line 46 of file MultiAppCopyTransfer.C.

 {
   TIME_SECTION("MultiAppCopyTransfer::execute()", 5, "Copies variables");
 
   if (_current_direction == TO_MULTIAPP)
   {
     FEProblemBase & from_problem = getToMultiApp()->problemBase();
     for (unsigned int i = 0; i < getToMultiApp()->numGlobalApps(); i++)
       if (getToMultiApp()->hasLocalApp(i))
         transfer(getToMultiApp()->appProblemBase(i), from_problem);
   }
 
   else if (_current_direction == FROM_MULTIAPP)
   {
     FEProblemBase & to_problem = getFromMultiApp()->problemBase();
     for (unsigned int i = 0; i < getFromMultiApp()->numGlobalApps(); i++)
       if (getFromMultiApp()->hasLocalApp(i))
         transfer(to_problem, getFromMultiApp()->appProblemBase(i));
   }
 
   else if (_current_direction == BETWEEN_MULTIAPP)
   {
     int transfers_done = 0;
     for (unsigned int i = 0; i < getFromMultiApp()->numGlobalApps(); i++)
     {
       if (getFromMultiApp()->hasLocalApp(i))
       {
         if (getToMultiApp()->hasLocalApp(i))
         {
           transfer(getToMultiApp()->appProblemBase(i), getFromMultiApp()->appProblemBase(i));
           transfers_done++;
         }
       }
     }
     if (!transfers_done)
       mooseError("BETWEEN_MULTIAPP transfer not supported if there is not at least one subapp "
                  "per multiapp involved on each rank");
   }
 }

◆ extendBoundingBoxes()

void MultiAppTransfer::extendBoundingBoxes	(	const Real	factor,
		std::vector< libMesh::BoundingBox > &	bboxes
	)		const

protectedinherited

Extends bounding boxes to avoid missing points.

Definition at line 455 of file MultiAppTransfer.C.

Referenced by MultiAppTransfer::getFromBoundingBoxes(), and MultiAppGeneralFieldTransfer::prepareToTransfer().

 {
   const auto extension_factor = factor - 1;
 
   // Extend (or contract if the extension factor is negative) bounding boxes along all the
   // directions by the same length. Greater than zero values of this member may be necessary because
   // the nearest bounding box does not necessarily give you the closest node/element. It will depend
   // on the partition and geometry. A node/element will more likely find its nearest source
   // element/node by extending bounding boxes. If each of the bounding boxes covers the entire
   // domain, a node/element will be able to find its nearest source element/node for sure, but at
   // the same time, more communication will be involved and can be expensive.
   for (auto & box : bboxes)
   {
     // libmesh set an invalid bounding box using this code
     // for (unsigned int i=0; i<LIBMESH_DIM; i++)
     // {
     //   this->first(i)  =  std::numeric_limits<Real>::max();
     //   this->second(i) = -std::numeric_limits<Real>::max();
     // }
     // If it is an invalid box, we should skip it
     if (box.first(0) == std::numeric_limits<Real>::max())
       continue;
 
     auto width = box.second - box.first;
     box.second += width * extension_factor;
     box.first -= width * extension_factor;
   }
 }

◆ find_sys()

System * Transfer::find_sys	(	libMesh::EquationSystems &	es,
		const std::string &	var_name
	)

staticinherited

Small helper function for finding the system containing the variable.

Note that this implies that variable names are unique across all systems!

Parameters

es	The EquationSystems object to be searched.
var_name	The name of the variable you are looking for.

Note that this implies that variable names are unique across all systems!

Definition at line 91 of file Transfer.C.

Referenced by MultiAppGeneralFieldTransfer::examineLocalValueConflicts(), MultiAppGeneralFieldTransfer::examineReceivedValueConflicts(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppVariableValueSampleTransfer::execute(), MultiAppNearestNodeTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppGeneralFieldTransfer::extractOutgoingPoints(), MultiAppGeneralFieldTransfer::setSolutionVectorValues(), and MultiAppShapeEvaluationTransfer::transferVariable().

 {
   // Find the system this variable is from
   for (unsigned int i = 0; i < es.n_systems(); i++)
     if (es.get_system(i).has_variable(var_name))
       return &es.get_system(i);
 
   ::mooseError("Unable to find variable " + var_name + " in any system.");
 
   // Unreachable
   return &es.get_system(0);
 }

◆ getAppInfo()

void MultiAppTransfer::getAppInfo ( )

virtualinherited

This method will fill information into the convenience member variables (_to_problems, _from_meshes, etc.)

Reimplemented in MultiAppGeneralFieldTransfer.

Definition at line 232 of file MultiAppTransfer.C.

Referenced by MultiAppUserObjectTransfer::execute(), MultiAppGeneralFieldTransfer::getAppInfo(), and MultiAppTransfer::initialSetup().

 {
   // I would like to do all of this in initialSetup, but it will fail with
   // multiapps that reset.  A reset deletes and rebuilds the FEProblems so all
   // of the pointers will be broken.
 
   // Clear the vectors since we've probably built them up from a previous call
   _from_problems.clear();
   _to_problems.clear();
   _from_es.clear();
   _to_es.clear();
   _from_meshes.clear();
   _to_meshes.clear();
   _to_positions.clear();
   _from_positions.clear();
   _to_transforms.clear();
   _from_transforms.clear();
   // Clear this map since we build it from scratch every time we transfer
   // Otherwise, this will cause two issues: 1) increasing memory usage
   // for a simulation that requires many transfers, 2) producing wrong results
   // when we do collective communication on this vector.
   _to_local2global_map.clear();
   _from_local2global_map.clear();
 
   // Build the vectors for to problems, from problems, and subapps positions.
   if (_current_direction == FROM_MULTIAPP)
   {
     _to_problems.push_back(&_from_multi_app->problemBase());
     _to_positions.push_back(Point(0., 0., 0.));
     getFromMultiAppInfo();
   }
   else if (_current_direction == TO_MULTIAPP)
   {
     _from_problems.push_back(&_to_multi_app->problemBase());
     _from_positions.push_back(Point(0., 0., 0.));
     getToMultiAppInfo();
   }
   else if (_current_direction == BETWEEN_MULTIAPP)
   {
     mooseAssert(&_from_multi_app->problemBase().coordTransform() ==
                     &_to_multi_app->problemBase().coordTransform(),
                 "I believe these should be the same. If not, then it will be difficult to define a "
                 "canonical reference frame.");
     getToMultiAppInfo();
     getFromMultiAppInfo();
   }
 
   // Build the from and to equation systems and mesh vectors.
   for (unsigned int i = 0; i < _to_problems.size(); i++)
   {
     // TODO: Do I actually want es or displaced es?
     _to_es.push_back(&_to_problems[i]->es());
     if (_displaced_target_mesh && _to_problems[i]->getDisplacedProblem())
       _to_meshes.push_back(&_to_problems[i]->getDisplacedProblem()->mesh());
     else
       _to_meshes.push_back(&_to_problems[i]->mesh());
   }
 
   for (unsigned int i = 0; i < _from_problems.size(); i++)
   {
     _from_es.push_back(&_from_problems[i]->es());
     if (_displaced_source_mesh && _from_problems[i]->getDisplacedProblem())
       _from_meshes.push_back(&_from_problems[i]->getDisplacedProblem()->mesh());
     else
       _from_meshes.push_back(&_from_problems[i]->mesh());
   }
 
   MooseAppCoordTransform::MinimalData from_app_transform_construction_data{};
   if (_communicator.rank() == 0)
     from_app_transform_construction_data =
         _current_direction == TO_MULTIAPP
             ? _to_multi_app->problemBase().coordTransform().minimalDataDescription()
             : _from_multi_app->appProblemBase(0).coordTransform().minimalDataDescription();
   _communicator.broadcast(from_app_transform_construction_data);
   _from_moose_app_transform =
       std::make_unique<MooseAppCoordTransform>(from_app_transform_construction_data);
 
   MooseAppCoordTransform::MinimalData to_app_transform_construction_data{};
   if (_communicator.rank() == 0)
     to_app_transform_construction_data =
         _current_direction == FROM_MULTIAPP
             ? _from_multi_app->problemBase().coordTransform().minimalDataDescription()
             : _to_multi_app->appProblemBase(0).coordTransform().minimalDataDescription();
   _communicator.broadcast(to_app_transform_construction_data);
   _to_moose_app_transform =
       std::make_unique<MooseAppCoordTransform>(to_app_transform_construction_data);
 
   /*
    * skip_coordinate_collapsing: whether to set the transform to skip coordinate collapsing
    *                             (from XYZ to RZ for example)
    * transforms: vector of transforms to add the new transforms to
    * moose_app_transform: base for the new transform
    * is_parent_app_transform: whether working on the transform for the parent app (this app, the
    *                          one creating the transfer) or for child apps
    * multiapp: pointer to the multiapp to obtain the position of the child apps
    */
   auto create_multiapp_transforms = [this](auto & transforms,
                                            const auto & moose_app_transform,
                                            const bool is_parent_app_transform,
                                            const MultiApp * const multiapp = nullptr)
   {
     mooseAssert(is_parent_app_transform || multiapp,
                 "Coordinate transform must be created either for child app or parent app");
     if (is_parent_app_transform)
     {
       transforms.push_back(std::make_unique<MultiAppCoordTransform>(moose_app_transform));
       transforms.back()->skipCoordinateCollapsing(_skip_coordinate_collapsing);
       // zero translation
     }
     else
     {
       mooseAssert(transforms.size() == 0, "transforms should not be initialized at this point");
       for (const auto i : make_range(multiapp->numGlobalApps()))
       {
         transforms.push_back(std::make_unique<MultiAppCoordTransform>(moose_app_transform));
         auto & transform = transforms[i];
         transform->skipCoordinateCollapsing(_skip_coordinate_collapsing);
         if (multiapp->usingPositions())
           transform->setTranslationVector(multiapp->position(i));
       }
     }
   };
 
   if (_current_direction == TO_MULTIAPP)
   {
     create_multiapp_transforms(
         _to_transforms, *_to_moose_app_transform, false, _to_multi_app.get());
     create_multiapp_transforms(_from_transforms, *_from_moose_app_transform, true);
   }
   if (_current_direction == FROM_MULTIAPP)
   {
     create_multiapp_transforms(_to_transforms, *_to_moose_app_transform, true);
     create_multiapp_transforms(
         _from_transforms, *_from_moose_app_transform, false, _from_multi_app.get());
   }
   if (_current_direction == BETWEEN_MULTIAPP)
   {
     create_multiapp_transforms(
         _to_transforms, *_to_moose_app_transform, false, _to_multi_app.get());
     create_multiapp_transforms(
         _from_transforms, *_from_moose_app_transform, false, _from_multi_app.get());
   }
 
   auto check_transform_compatibility = [this](const MultiAppCoordTransform & transform)
   {
     if (transform.hasNonTranslationTransformation() && !usesMooseAppCoordTransform())
       mooseWarning("Transfer '",
                    name(),
                    "' of type '",
                    type(),
                    "' has non-translation transformations but it does not implement coordinate "
                    "transformations using the 'MooseAppCoordTransform' class. Your data transfers "
                    "will not be performed in the expected transformed frame");
   };
 
   // set the destination coordinate systems for each transform for the purposes of determining
   // coordinate collapsing. For example if TO is XYZ and FROM is RZ, then TO will have its XYZ
   // coordinates collapsed into RZ and FROM will have a no-op for coordinate collapsing
 
   for (const auto i : index_range(_from_transforms))
   {
     auto & from_transform = _from_transforms[i];
     from_transform->setDestinationCoordTransform(*_to_moose_app_transform);
     if (i == 0)
       check_transform_compatibility(*from_transform);
   }
   for (const auto i : index_range(_to_transforms))
   {
     auto & to_transform = _to_transforms[i];
     to_transform->setDestinationCoordTransform(*_from_moose_app_transform);
     if (i == 0)
       check_transform_compatibility(*to_transform);
   }
 }

◆ getCheckedPointerParam()

template<typename T >

T MooseBaseParameterInterface::getCheckedPointerParam	(	const std::string &	name,
		const std::string &	error_string = `""`
	)		const

inherited

Verifies that the requested parameter exists and is not NULL and returns it to the caller.

The template parameter must be a pointer or an error will be thrown.

Definition at line 286 of file MooseBaseParameterInterface.h.

 {
   return parameters().getCheckedPointerParam<T>(name, error_string);
 }

◆ getDataFileName()

std::string DataFileInterface::getDataFileName ( const std::string & param ) const

inherited

Deprecated method.

The data file paths are now automatically set within the InputParameters object, so using getParam<DataFileName>("param_name") is now sufficient.

Definition at line 21 of file DataFileInterface.C.

 {
   _parent.mooseDeprecated("getDataFileName() is deprecated. The file path is now directly set "
                           "within the InputParameters.\nUse getParam<DataFileName>(\"",
                           param,
                           "\") instead.");
   return _parent.getParam<DataFileName>(param);
 }

◆ getDataFileNameByName()

std::string DataFileInterface::getDataFileNameByName ( const std::string & relative_path ) const

inherited

Deprecated method.

Use getDataFilePath() instead.

Definition at line 31 of file DataFileInterface.C.

 {
   _parent.mooseDeprecated("getDataFileNameByName() is deprecated. Use getDataFilePath(\"",
                           relative_path,
                           "\") instead.");
   return getDataFilePath(relative_path);
 }

◆ getDataFilePath()

std::string DataFileInterface::getDataFilePath ( const std::string & relative_path ) const

inherited

Returns the path of a data file for a given relative file path.

This can be used for hardcoded datafile names and will search the same locations as getDataFileName

Definition at line 40 of file DataFileInterface.C.

Referenced by DataFileInterface::getDataFileNameByName().

 {
   // This should only ever be used with relative paths. There is no point to
   // use this search path with an absolute path.
   if (std::filesystem::path(relative_path).is_absolute())
     _parent.mooseWarning("While using getDataFilePath(\"",
                          relative_path,
                          "\"): This API should not be used for absolute paths.");
 
   // Throw on error so that if getPath() fails, we can throw an error
   // with the context of _parent.mooseError()
   const auto throw_on_error_before = Moose::_throw_on_error;
   Moose::_throw_on_error = true;
   std::optional<std::string> error;
 
   // This will search the data paths for this relative path
   Moose::DataFileUtils::Path found_path;
   try
   {
     found_path = Moose::DataFileUtils::getPath(relative_path);
   }
   catch (std::exception & e)
   {
     error = e.what();
   }
 
   Moose::_throw_on_error = throw_on_error_before;
   if (error)
     _parent.mooseError(*error);
 
   mooseAssert(found_path.context == Moose::DataFileUtils::Context::DATA,
               "Should only ever obtain data");
   mooseAssert(found_path.data_name, "Should be set");
 
   const std::string msg =
       "Using data file '" + found_path.path + "' from " + *found_path.data_name + " data";
   _parent.mooseInfo(msg);
 
   return found_path.path;
 }

◆ getEquationSystem()

EquationSystems & MultiAppFieldTransfer::getEquationSystem	(	FEProblemBase &	problem,
		bool	use_displaced
	)		const

protectedinherited

Returns the Problem's equation system, displaced or not Be careful! If you transfer TO a displaced system you will likely need a synchronization So most transfers reach the non-displaced system directly.

Definition at line 55 of file MultiAppFieldTransfer.C.

Referenced by MultiAppGeneralFieldShapeEvaluationTransfer::buildMeshFunctions(), MultiAppGeneralFieldTransfer::examineLocalValueConflicts(), MultiAppGeneralFieldTransfer::examineReceivedValueConflicts(), MultiAppGeneralFieldTransfer::extractOutgoingPoints(), MultiAppGeneralFieldTransfer::setSolutionVectorValues(), and MultiAppShapeEvaluationTransfer::transferVariable().

 {
   if (use_displaced)
   {
     if (!problem.getDisplacedProblem())
       mooseError("No displaced problem to provide a displaced equation system");
     return problem.getDisplacedProblem()->es();
   }
   else
     return problem.es();
 }

◆ getExecuteOnEnum()

const ExecFlagEnum & SetupInterface::getExecuteOnEnum ( ) const

inherited

Return the execute on MultiMooseEnum for this object.

Definition at line 66 of file SetupInterface.C.

Referenced by MultiAppTransfer::checkMultiAppExecuteOn(), EigenProblem::checkProblemIntegrity(), Control::Control(), EigenExecutionerBase::init(), MultiAppConservativeTransfer::initialSetup(), IntegralPreservingFunctionIC::initialSetup(), Terminator::initialSetup(), Exodus::outputSetup(), NodalReporter::shouldStore(), ElementReporter::shouldStore(), and GeneralReporter::shouldStore().

 {
   return _execute_enum;
 }

◆ getFromBoundingBoxes() [1/2]

std::vector< BoundingBox > MultiAppTransfer::getFromBoundingBoxes ( )

protectedinherited

Return the bounding boxes of all the "from" domains, including all the domains not local to this processor.

There is a boundary restricted version which will return a degenerate minimum boundary box (min, min, min, min, min, min) in the case where the source domain doesn't have any active nodes on the boundary. Note: bounding boxes are in the reference space when using coordinate transformations / positions Note: global bounding boxes are not indexed by app number. But rather outer indexing is by process, then the inner indexing is by local app number.

Definition at line 485 of file MultiAppTransfer.C.

Referenced by MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), and MultiAppShapeEvaluationTransfer::transferVariable().

 {
   std::vector<std::pair<Point, Point>> bb_points(_from_meshes.size());
   for (unsigned int i = 0; i < _from_meshes.size(); i++)
   {
     // Get a bounding box around the mesh elements that are local to the current
     // processor.
     BoundingBox bbox = MeshTools::create_local_bounding_box(*_from_meshes[i]);
 
     // Translate the bounding box to the from domain's position. We may have rotations so we must
     // be careful in constructing the new min and max (first and second)
     const auto from_global_num = getGlobalSourceAppIndex(i);
     transformBoundingBox(bbox, *_from_transforms[from_global_num]);
 
     // Cast the bounding box into a pair of points (so it can be put through
     // MPI communication).
     bb_points[i] = static_cast<std::pair<Point, Point>>(bbox);
   }
 
   // Serialize the bounding box points.
   _communicator.allgather(bb_points);
 
   // Recast the points back into bounding boxes and return.
   std::vector<BoundingBox> bboxes(bb_points.size());
   for (unsigned int i = 0; i < bb_points.size(); i++)
     bboxes[i] = static_cast<BoundingBox>(bb_points[i]);
 
   // possibly extend bounding boxes
   extendBoundingBoxes(_bbox_factor, bboxes);
 
   return bboxes;
 }

◆ getFromBoundingBoxes() [2/2]

std::vector< BoundingBox > MultiAppTransfer::getFromBoundingBoxes ( BoundaryID boundary_id )

protectedinherited

Definition at line 519 of file MultiAppTransfer.C.

 {
   std::vector<std::pair<Point, Point>> bb_points(_from_meshes.size());
   const Real min_r = std::numeric_limits<Real>::lowest();
   const Real max_r = std::numeric_limits<Real>::max();
 
   for (unsigned int i = 0; i < _from_meshes.size(); i++)
   {
 
     Point min(max_r, max_r, max_r);
     Point max(min_r, min_r, min_r);
     bool at_least_one = false;
 
     // TODO: Factor this into mesh_tools after adding new boundary bounding box routine.
     const ConstBndNodeRange & bnd_nodes = *_from_meshes[i]->getBoundaryNodeRange();
     for (const auto & bnode : bnd_nodes)
     {
       if (bnode->_bnd_id == boundary_id &&
           bnode->_node->processor_id() == _from_meshes[i]->processor_id())
       {
         at_least_one = true;
         const auto & node = *bnode->_node;
         for (const auto i : make_range(Moose::dim))
         {
           min(i) = std::min(min(i), node(i));
           max(i) = std::max(max(i), node(i));
         }
       }
     }
 
     BoundingBox bbox(min, max);
     if (!at_least_one)
       bbox.min() = max; // If we didn't hit any nodes, this will be _the_ minimum bbox
     else
     {
       // Translate the bounding box to the from domain's position. We may have rotations so we must
       // be careful in constructing the new min and max (first and second)
       const auto from_global_num = getGlobalSourceAppIndex(i);
       transformBoundingBox(bbox, *_from_transforms[from_global_num]);
     }
 
     // Cast the bounding box into a pair of points (so it can be put through
     // MPI communication).
     bb_points[i] = static_cast<std::pair<Point, Point>>(bbox);
   }
 
   // Serialize the bounding box points.
   _communicator.allgather(bb_points);
 
   // Recast the points back into bounding boxes and return.
   std::vector<BoundingBox> bboxes(bb_points.size());
   for (unsigned int i = 0; i < bb_points.size(); i++)
     bboxes[i] = static_cast<BoundingBox>(bb_points[i]);
 
   // possibly extend bounding boxes
   extendBoundingBoxes(_bbox_factor, bboxes);
 
   return bboxes;
 }

◆ getFromMultiApp()

const std::shared_ptr<MultiApp> MultiAppTransfer::getFromMultiApp ( ) const

inlineinherited

Get the MultiApp to transfer data from.

Definition at line 63 of file MultiAppTransfer.h.

Referenced by MultiAppVariableValueSamplePostprocessorTransfer::cacheElemToPostprocessorData(), MultiAppPostprocessorToAuxScalarTransfer::checkSiblingsTransferSupported(), MultiAppScalarToAuxScalarTransfer::checkSiblingsTransferSupported(), MultiAppPostprocessorTransfer::checkSiblingsTransferSupported(), MultiAppReporterTransfer::checkSiblingsTransferSupported(), MultiAppMFEMCopyTransfer::checkSiblingsTransferSupported(), checkSiblingsTransferSupported(), MultiAppTransfer::errorIfObjectExecutesOnTransferInSourceApp(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppScalarToAuxScalarTransfer::execute(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppPostprocessorTransfer::execute(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), execute(), MultiAppMFEMCopyTransfer::execute(), MultiAppGeometricInterpolationTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppCloneReporterTransfer::executeFromMultiapp(), MultiAppReporterTransfer::executeFromMultiapp(), MultiAppVectorPostprocessorTransfer::executeFromMultiapp(), MultiAppReporterTransfer::executeToMultiapp(), MultiAppCloneReporterTransfer::initialSetup(), MultiAppReporterTransfer::initialSetup(), MultiAppConservativeTransfer::initialSetup(), MultiAppVariableValueSampleTransfer::initialSetup(), MultiAppVariableValueSamplePostprocessorTransfer::initialSetup(), MultiAppDofCopyTransfer::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), MultiAppGeneralFieldTransfer::locatePointReceivers(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), MultiAppMFEMCopyTransfer::MultiAppMFEMCopyTransfer(), MultiAppPostprocessorInterpolationTransfer::MultiAppPostprocessorInterpolationTransfer(), MultiAppReporterTransfer::MultiAppReporterTransfer(), MultiAppUserObjectTransfer::MultiAppUserObjectTransfer(), MultiAppConservativeTransfer::postExecute(), and MultiAppVariableValueSamplePostprocessorTransfer::setupPostprocessorCommunication().

   {
     if (!_from_multi_app)
       mooseError(
           "A from_multiapp was requested but is unavailable. Check the from_multi_app parameter");
     else
       return _from_multi_app;
   }

◆ getFromName()

std::string MultiAppTransfer::getFromName ( ) const

inlineinherited

Get the name of thing being transferred from.

Returns: the name of the multiapp or "Parent"

Definition at line 86 of file MultiAppTransfer.h.

   {
     if (_from_multi_app)
       return _from_multi_app->name();
     else
       return "Parent";
   }

◆ getFromsPerProc()

std::vector< unsigned int > MultiAppTransfer::getFromsPerProc ( )

protectedinherited

Return the number of "from" domains that each processor owns.

Note: same indexing as getFromBoundingBoxes

Definition at line 580 of file MultiAppTransfer.C.

Referenced by MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppGeneralFieldTransfer::prepareToTransfer(), and MultiAppShapeEvaluationTransfer::transferVariable().

 {
   std::vector<unsigned int> froms_per_proc;
   if (_to_multi_app)
     froms_per_proc.resize(n_processors(), 1);
   if (_from_multi_app)
   {
     froms_per_proc.resize(n_processors());
     _communicator.allgather(_from_multi_app->numLocalApps(), froms_per_proc);
   }
   return froms_per_proc;
 }

◆ getFromVarNames()

virtual std::vector<VariableName> MultiAppCopyTransfer::getFromVarNames ( ) const

inlineoverrideprotectedvirtual

Virtual function defining variables to be transferred.

Implements MultiAppFieldTransfer.

Definition at line 36 of file MultiAppCopyTransfer.h.

36 { return _from_var_names; }

MultiAppCopyTransfer::_from_var_names

const std::vector< VariableName > _from_var_names

Name of variables transferring from.

Definition: MultiAppCopyTransfer.h:41

◆ getGlobalSourceAppIndex()

unsigned int MultiAppTransfer::getGlobalSourceAppIndex ( unsigned int i_from ) const

protectedinherited

Return the global app index from the local index in the "from-multiapp" transfer direction.

Definition at line 637 of file MultiAppTransfer.C.

 {
   mooseAssert(_current_direction == TO_MULTIAPP || i_from < _from_local2global_map.size(),
               "Out of bounds local from-app index");
   return _current_direction == TO_MULTIAPP ? 0 : _from_local2global_map[i_from];
 }

◆ getGlobalTargetAppIndex()

unsigned int MultiAppTransfer::getGlobalTargetAppIndex ( unsigned int i_to ) const

protectedinherited

Return the global app index from the local index in the "to-multiapp" transfer direction.

Definition at line 645 of file MultiAppTransfer.C.

Referenced by MultiAppGeneralFieldTransfer::cacheIncomingInterpVals(), MultiAppGeneralFieldTransfer::cacheOutgoingPointInfo(), MultiAppGeneralFieldTransfer::extractOutgoingPoints(), MultiAppTransfer::getPointInTargetAppFrame(), MultiAppGeneralFieldTransfer::locatePointReceivers(), and MultiAppGeneralFieldTransfer::setSolutionVectorValues().

 {
   mooseAssert(_current_direction == FROM_MULTIAPP || i_to < _to_local2global_map.size(),
               "Out of bounds local to-app index");
   return _current_direction == FROM_MULTIAPP ? 0 : _to_local2global_map[i_to];
 }

◆ getLocalSourceAppIndex()

unsigned int MultiAppTransfer::getLocalSourceAppIndex ( unsigned int i_from ) const

protectedinherited

Return the local app index from the global index in the "from-multiapp" transfer direction We use the fact that global app indexes are consecutive on a given rank.

Definition at line 653 of file MultiAppTransfer.C.

 {
   return _current_direction == TO_MULTIAPP
              ? 0
              : _from_local2global_map[i_from] - _from_local2global_map[0];
 }

◆ getMooseApp()

MooseApp& MooseBase::getMooseApp ( ) const

inlineinherited

Get the MooseApp this class is associated with.

Definition at line 45 of file MooseBase.h.

Referenced by ChainControlSetupAction::act(), AddDefaultConvergenceAction::addDefaultMultiAppFixedPointConvergence(), AddDefaultConvergenceAction::addDefaultNonlinearConvergence(), AddDefaultConvergenceAction::addDefaultSteadyStateConvergence(), FEProblemBase::advanceState(), ParsedChainControl::buildFunction(), ReporterTransferInterface::checkHasReporterValue(), AddDefaultConvergenceAction::checkUnusedMultiAppFixedPointConvergenceParameters(), AddDefaultConvergenceAction::checkUnusedNonlinearConvergenceParameters(), AddDefaultConvergenceAction::checkUnusedSteadyStateConvergenceParameters(), Coupleable::checkWritableVar(), ComponentPhysicsInterface::ComponentPhysicsInterface(), MooseBaseParameterInterface::connectControllableParams(), Coupleable::Coupleable(), MortarData::createMortarInterface(), EigenProblem::doFreeNonlinearPowerIterations(), Terminator::execute(), FEProblemSolve::FEProblemSolve(), SolutionInvalidInterface::flagInvalidSolutionInternal(), ChainControl::getChainControlDataSystem(), DefaultConvergenceBase::getSharedExecutionerParam(), ChainControlDataPostprocessor::initialSetup(), MaterialPropertyInterface::MaterialPropertyInterface(), MooseVariableDataFV< OutputType >::MooseVariableDataFV(), ProgressOutput::output(), PetscOutputInterface::petscLinearOutput(), PetscOutputInterface::petscNonlinearOutput(), PetscOutputInterface::PetscOutputInterface(), PostprocessorInterface::postprocessorsAdded(), MultiApp::preTransfer(), Reporter::Reporter(), ReporterInterface::reportersAdded(), MultiApp::restore(), and VectorPostprocessorInterface::vectorPostprocessorsAdded().

45 { return _app; }

MooseBase::_app

MooseApp & _app

The MOOSE application this is associated with.

Definition: MooseBase.h:84

◆ getMultiApp()

const std::shared_ptr<MultiApp> MultiAppTransfer::getMultiApp ( ) const

inlineinherited

Use this getter to obtain the MultiApp for transfers with a single direction.

Definition at line 48 of file MultiAppTransfer.h.

Referenced by MultiAppCloneReporterTransfer::initialSetup().

   {
     if (_from_multi_app && _to_multi_app && _from_multi_app != _to_multi_app)
       mooseError("Unclear which app you want to retrieve from Transfer ", name());
     else if (_from_multi_app)
       return _from_multi_app;
     else if (_to_multi_app)
       return _to_multi_app;
     else if (_multi_app)
       return _multi_app;
     else
       mooseError("Should not get here, there should be a multiapp");
   }

◆ getParam() [1/2]

template<typename T >

const T & MooseBaseParameterInterface::getParam ( const std::string & name ) const

inherited

Retrieve a parameter for the object.

Parameters

name	The name of the parameter

Returns: The value of the parameter

Definition at line 215 of file MooseBaseParameterInterface.h.

 {
   return InputParameters::getParamHelper(name, _pars, static_cast<T *>(0), &_moose_base);
 }

◆ getParam() [2/2]

template<typename T1 , typename T2 >

std::vector< std::pair< T1, T2 > > MooseBaseParameterInterface::getParam	(	const std::string &	param1,
		const std::string &	param2
	)		const

inherited

Retrieve two parameters and provide pair of parameters for the object.

Parameters

param1	The name of first parameter
param2	The name of second parameter

Returns: Vector of pairs of first and second parameters

Definition at line 279 of file MooseBaseParameterInterface.h.

 {
   return _pars.get<T1, T2>(param1, param2);
 }

◆ getPointInTargetAppFrame()

Point MultiAppTransfer::getPointInTargetAppFrame	(	const Point &	p,
		unsigned int	local_i_to,
		const std::string &	phase
	)		const

protectedinherited

Get the target app point from a point in the reference frame.

Parameters

p	the point in the reference frame
local_i_to	the local target problem into
phase	the phase of the transfer where this is being attempted in case we have to output an info message that the coordinate collapse is not being applied

Returns: the point in the target app frame

Definition at line 616 of file MultiAppTransfer.C.

Referenced by MultiAppGeneralFieldTransfer::cacheIncomingInterpVals(), and MultiAppGeneralFieldTransfer::examineLocalValueConflicts().

 {
   const auto & to_transform = _to_transforms[getGlobalTargetAppIndex(local_i_to)];
   if (to_transform->hasCoordinateSystemTypeChange())
   {
     if (!_skip_coordinate_collapsing)
       mooseInfo(phase + " cannot use the point in the target app frame due to the "
                         "non-uniqueness of the coordinate collapsing reverse mapping."
                         " Coordinate collapse is ignored for this operation");
     to_transform->skipCoordinateCollapsing(true);
     const auto target_point = to_transform->mapBack(p);
     to_transform->skipCoordinateCollapsing(false);
     return target_point;
   }
   else
     return to_transform->mapBack(p);
 }

◆ getRenamedParam()

template<typename T >

const T & MooseBaseParameterInterface::getRenamedParam	(	const std::string &	old_name,
		const std::string &	new_name
	)		const

inherited

Retrieve a renamed parameter for the object.

This helper makes sure we check both names before erroring, and that only one parameter is passed to avoid silent errors

Parameters

old_name	the old name for the parameter
new_name	the new name for the parameter

Definition at line 229 of file MooseBaseParameterInterface.h.

 {
   // this enables having a default on the new parameter but bypassing it with the old one
   // Most important: accept new parameter
   if (isParamSetByUser(new_name) && !isParamValid(old_name))
     return InputParameters::getParamHelper(new_name, _pars, static_cast<T *>(0), &_moose_base);
   // Second most: accept old parameter
   else if (isParamValid(old_name) && !isParamSetByUser(new_name))
     return InputParameters::getParamHelper(old_name, _pars, static_cast<T *>(0), &_moose_base);
   // Third most: accept default for new parameter
   else if (isParamValid(new_name) && !isParamValid(old_name))
     return InputParameters::getParamHelper(new_name, _pars, static_cast<T *>(0), &_moose_base);
   // Refuse: no default, no value passed
   else if (!isParamValid(old_name) && !isParamValid(new_name))
     mooseError(_pars.blockFullpath() + ": parameter '" + new_name +
                "' is being retrieved without being set.\n"
                "Did you misspell it?");
   // Refuse: both old and new parameters set by user
   else
     mooseError(_pars.blockFullpath() + ": parameter '" + new_name +
                "' may not be provided alongside former parameter '" + old_name + "'");
 }

◆ getRestartableData()

template<typename T , typename... Args>

const T & Restartable::getRestartableData ( const std::string & data_name ) const

protectedinherited

Declare a piece of data as "restartable" and initialize it Similar to declareRestartableData but returns a const reference to the object.

Forwarded arguments are not allowed in this case because we assume that the object is restarted and we won't need different constructors to initialize it.

NOTE: This returns a const reference! Make sure you store it in a const reference!

Parameters

data_name The name of the data (usually just use the same name as the member variable)

Definition at line 287 of file Restartable.h.

 {
   return declareRestartableDataHelper<T>(data_name, nullptr).get();
 }

◆ getSharedPtr() [1/2]

std::shared_ptr< MooseObject > MooseObject::getSharedPtr ( )

inherited

Get another shared pointer to this object that has the same ownership group.

Wrapper around shared_from_this().

Definition at line 68 of file MooseObject.C.

Referenced by MFEMProblem::addBoundaryCondition(), MFEMProblem::addKernel(), and MFEMProblem::addMFEMSolver().

 {
   try
   {
     return shared_from_this();
   }
   catch (std::bad_weak_ptr &)
   {
     mooseError(not_shared_error);
   }
 }

◆ getSharedPtr() [2/2]

std::shared_ptr< const MooseObject > MooseObject::getSharedPtr ( ) const

inherited

Definition at line 81 of file MooseObject.C.

 {
   try
   {
     return shared_from_this();
   }
   catch (std::bad_weak_ptr &)
   {
     mooseError(not_shared_error);
   }
 }

◆ getToMultiApp()

const std::shared_ptr<MultiApp> MultiAppTransfer::getToMultiApp ( ) const

inlineinherited

Get the MultiApp to transfer data to.

Definition at line 73 of file MultiAppTransfer.h.

Referenced by MultiAppPostprocessorToAuxScalarTransfer::checkSiblingsTransferSupported(), MultiAppScalarToAuxScalarTransfer::checkSiblingsTransferSupported(), MultiAppPostprocessorTransfer::checkSiblingsTransferSupported(), MultiAppReporterTransfer::checkSiblingsTransferSupported(), MultiAppMFEMCopyTransfer::checkSiblingsTransferSupported(), checkSiblingsTransferSupported(), MultiAppScalarToAuxScalarTransfer::execute(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppPostprocessorTransfer::execute(), MultiAppVariableValueSampleTransfer::execute(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), MultiAppMFEMCopyTransfer::execute(), execute(), MultiAppGeometricInterpolationTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppReporterTransfer::executeFromMultiapp(), MultiAppReporterTransfer::executeToMultiapp(), MultiAppVectorPostprocessorTransfer::executeToMultiapp(), MultiAppReporterTransfer::initialSetup(), MultiAppCloneReporterTransfer::initialSetup(), MultiAppConservativeTransfer::initialSetup(), MultiAppVariableValueSampleTransfer::initialSetup(), MultiAppVariableValueSamplePostprocessorTransfer::initialSetup(), MultiAppDofCopyTransfer::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), MultiAppMFEMCopyTransfer::MultiAppMFEMCopyTransfer(), MultiAppReporterTransfer::MultiAppReporterTransfer(), MultiAppUserObjectTransfer::MultiAppUserObjectTransfer(), and MultiAppConservativeTransfer::postExecute().

   {
     if (!_to_multi_app)
       mooseError(
           "A to_multiapp was requested but is unavailable. Check the to_multi_app parameter");
     else
       return _to_multi_app;
   }

◆ getToName()

std::string MultiAppTransfer::getToName ( ) const

inlineinherited

Get the name of thing being transferred to.

Returns: the name of the multiapp or "Parent"

Definition at line 98 of file MultiAppTransfer.h.

   {
     if (_to_multi_app)
       return _to_multi_app->name();
     else
       return "Parent";
   }

◆ getToVarNames()

virtual std::vector<AuxVariableName> MultiAppCopyTransfer::getToVarNames ( ) const

inlineoverrideprotectedvirtual

Virtual function defining variables to transfer to.

Implements MultiAppFieldTransfer.

Definition at line 37 of file MultiAppCopyTransfer.h.

37 { return _to_var_names; }

MultiAppCopyTransfer::_to_var_names

const std::vector< AuxVariableName > _to_var_names

Name of variables transferring to.

Definition: MultiAppCopyTransfer.h:43

◆ getTransferVector()

NumericVector< Real > & MultiAppTransfer::getTransferVector	(	unsigned int	i_local,
		std::string	var_name
	)

protectedinherited

If we are transferring to a multiapp, return the appropriate solution vector.

Definition at line 594 of file MultiAppTransfer.C.

Referenced by MultiAppNearestNodeTransfer::execute(), and MultiAppShapeEvaluationTransfer::transferVariable().

 {
   mooseAssert(_to_multi_app, "getTransferVector only works for transfers to multiapps");
 
   return _to_multi_app->appTransferVector(_to_local2global_map[i_local], var_name);
 }

◆ hasFromMultiApp()

bool MultiAppTransfer::hasFromMultiApp ( ) const

inlineinherited

Whether the transfer owns a non-null from_multi_app.

Definition at line 112 of file MultiAppTransfer.h.

Referenced by MultiAppTransfer::errorIfObjectExecutesOnTransferInSourceApp(), MultiAppPostprocessorTransfer::execute(), MultiAppGeometricInterpolationTransfer::execute(), MultiAppReporterTransfer::executeFromMultiapp(), MultiAppReporterTransfer::executeToMultiapp(), MultiAppReporterTransfer::initialSetup(), MultiAppConservativeTransfer::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), MultiAppMFEMCopyTransfer::MultiAppMFEMCopyTransfer(), MultiAppReporterTransfer::MultiAppReporterTransfer(), MultiAppVariableValueSampleTransfer::MultiAppVariableValueSampleTransfer(), and MultiAppGeneralFieldTransfer::outputValueConflicts().

112 { return !(!_from_multi_app); }

MultiAppTransfer::_from_multi_app

std::shared_ptr< MultiApp > _from_multi_app

The MultiApps this Transfer is transferring data to or from.

Definition: MultiAppTransfer.h:268

◆ hasToMultiApp()

bool MultiAppTransfer::hasToMultiApp ( ) const

inlineinherited

Whether the transfer owns a non-null to_multi_app.

Definition at line 115 of file MultiAppTransfer.h.

Referenced by MultiAppReporterTransfer::executeFromMultiapp(), MultiAppReporterTransfer::executeToMultiapp(), MultiAppReporterTransfer::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), MultiAppMFEMCopyTransfer::MultiAppMFEMCopyTransfer(), MultiAppReporterTransfer::MultiAppReporterTransfer(), MultiAppGeneralFieldTransfer::outputValueConflicts(), and MultiAppGeneralFieldTransfer::setSolutionVectorValues().

115 { return !(!_to_multi_app); }

MultiAppTransfer::_to_multi_app

std::shared_ptr< MultiApp > _to_multi_app

Definition: MultiAppTransfer.h:269

◆ initialSetup()

void MultiAppDofCopyTransfer::initialSetup ( )

overridevirtualinherited

Method called at the beginning of the simulation for checking integrity or doing one-time setup.

Reimplemented from MultiAppFieldTransfer.

Definition at line 57 of file MultiAppDofCopyTransfer.C.

 {
   MultiAppFieldTransfer::initialSetup();
 
   const FEProblemBase * from_problem;
   const FEProblemBase * to_problem;
 
   if (_current_direction == FROM_MULTIAPP)
   {
     // Subdomain and variable type information is shared on all subapps
     from_problem = &getFromMultiApp()->appProblemBase(getFromMultiApp()->firstLocalApp());
     to_problem = &getFromMultiApp()->problemBase();
   }
   else if (_current_direction == TO_MULTIAPP)
   {
     from_problem = &getToMultiApp()->problemBase();
     to_problem = &getToMultiApp()->appProblemBase(getToMultiApp()->firstLocalApp());
   }
   else
   {
     from_problem = &getFromMultiApp()->appProblemBase(getFromMultiApp()->firstLocalApp());
     to_problem = &getToMultiApp()->appProblemBase(getToMultiApp()->firstLocalApp());
   }
 
   if (from_problem->mesh().getParallelType() != to_problem->mesh().getParallelType())
     mooseError("The parallel types (distributed or replicated) of the meshes are not the same.");
 
   // Convert block names to block IDs, fill with all blocks if unspecified
   if (_has_block_restrictions)
   {
     const auto & from_block_names = getParam<std::vector<SubdomainName>>("from_blocks");
     for (const auto & b : from_block_names)
       if (!MooseMeshUtils::hasSubdomainName(const_cast<MeshBase &>(from_problem->mesh().getMesh()),
                                             b))
         paramError("from_blocks", "The block '", b, "' was not found in the mesh");
 
     if (from_block_names.size())
     {
       if (from_problem)
       {
         const auto block_vec = from_problem->mesh().getSubdomainIDs(from_block_names);
         _from_blocks = std::set<SubdomainID>(block_vec.begin(), block_vec.end());
       }
       // We dont even own any of these subapps
       else
         _from_blocks = {Moose::INVALID_BLOCK_ID};
     }
     else
       _from_blocks = from_problem->mesh().meshSubdomains();
 
     const auto & to_block_names = getParam<std::vector<SubdomainName>>("to_blocks");
     for (const auto & b : to_block_names)
       if (!MooseMeshUtils::hasSubdomainName(const_cast<MeshBase &>(to_problem->mesh().getMesh()),
                                             b))
         paramError("to_blocks", "The block '", b, "' was not found in the mesh");
 
     if (to_block_names.size())
     {
       if (to_problem)
       {
         const auto block_vec = to_problem->mesh().getSubdomainIDs(to_block_names);
         _to_blocks = std::set<SubdomainID>(block_vec.begin(), block_vec.end());
       }
       // We dont even own any of these subapps
       else
         _from_blocks = {Moose::INVALID_BLOCK_ID};
     }
     else
       _to_blocks = to_problem->mesh().meshSubdomains();
   }
 
   // Forbid block restriction on nodal variables as currently not supported
   if (_from_blocks.size())
     for (auto & from_var : getFromVarNames())
       if (from_problem
               ->getVariable(
                   0, from_var, Moose::VarKindType::VAR_ANY, Moose::VarFieldType::VAR_FIELD_ANY)
               .hasDoFsOnNodes())
         paramError("from_blocks", "Block restriction is not implemented for nodal variables");
   if (_to_blocks.size())
     for (auto & to_var : getToVarNames())
       if (to_problem
               ->getVariable(
                   0, to_var, Moose::VarKindType::VAR_ANY, Moose::VarFieldType::VAR_FIELD_ANY)
               .hasDoFsOnNodes())
         paramError("to_blocks", "Block restriction is not implemented for nodal variables");
 }

◆ isParamSetByUser()

bool MooseBaseParameterInterface::isParamSetByUser ( const std::string & nm ) const

inlineinherited

Test if the supplied parameter is set by a user, as opposed to not set or set to default.

Parameters

nm	The name of the parameter to test

Definition at line 128 of file MooseBaseParameterInterface.h.

Referenced by SetupDebugAction::act(), ADConservativeAdvectionBC::ADConservativeAdvectionBC(), DiffusionCG::addFEBCs(), DiffusionPhysicsBase::addInitialConditions(), MFEMMesh::buildMesh(), LibtorchNeuralNetControl::conditionalParameterError(), DiffusionPhysicsBase::DiffusionPhysicsBase(), ElementSubdomainModifierBase::ElementSubdomainModifierBase(), MooseBaseParameterInterface::getRenamedParam(), DefaultConvergenceBase::getSharedExecutionerParam(), AddVariableAction::init(), PhysicsBase::initializePhysics(), ElementSubdomainModifierBase::initialSetup(), MatrixSymmetryCheck::MatrixSymmetryCheck(), MeshDiagnosticsGenerator::MeshDiagnosticsGenerator(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), SolutionInvalidityOutput::output(), Output::Output(), MultiAppGeneralFieldTransfer::outputValueConflicts(), PetscExternalPartitioner::partition(), PiecewiseTabularBase::PiecewiseTabularBase(), MooseMesh::prepare(), SolutionUserObjectBase::readXda(), PhysicsBase::reportPotentiallyMissedParameters(), MFEMSolverBase::setPreconditioner(), SideSetsFromBoundingBoxGenerator::SideSetsFromBoundingBoxGenerator(), TimedSubdomainModifier::TimedSubdomainModifier(), and XYDelaunayGenerator::XYDelaunayGenerator().

128 { return _pars.isParamSetByUser(nm); }

InputParameters::isParamSetByUser

bool isParamSetByUser(const std::string &name) const

Method returns true if the parameter was set by the user.

Definition: InputParameters.C:1178

MooseBaseParameterInterface::_pars

const InputParameters & _pars

Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.

Definition: MooseBaseParameterInterface.h:173

◆ isParamValid()

bool MooseBaseParameterInterface::isParamValid ( const std::string & name ) const

inlineinherited

Test if the supplied parameter is valid.

Parameters

name	The name of the parameter to test

Definition at line 122 of file MooseBaseParameterInterface.h.

122 { return _pars.isParamValid(name); }

MooseBaseParameterInterface::_pars

const InputParameters & _pars

Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.

Definition: MooseBaseParameterInterface.h:173

InputParameters::isParamValid

bool isParamValid(const std::string &name) const

This method returns parameters that have been initialized in one fashion or another, i.e.

Definition: InputParameters.C:390

◆ jacobianSetup()

void SetupInterface::jacobianSetup ( )

virtualinherited

Gets called just before the Jacobian is computed and before this object is asked to do its job.

Reimplemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, MooseVariableField< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, Function, Positions, Times, DiffusionLHDGKernel, IPHDGKernel, EqualValueEmbeddedConstraintTempl< is_ad >, ADKernelTempl< T >, IPHDGBC, DiffusionLHDGPrescribedGradientBC, and DiffusionLHDGDirichletBC.

Definition at line 51 of file SetupInterface.C.

Referenced by MooseVariableField< Real >::jacobianSetup(), and ComputeFVFluxJacobianThread< RangeType >::setup().

52 {

53 }

◆ mooseDeprecated()

template<typename... Args>

void MooseBaseErrorInterface::mooseDeprecated ( Args &&... args ) const

inlineinherited

Definition at line 91 of file MooseBaseErrorInterface.h.

Referenced by FEProblemBase::addAuxArrayVariable(), FEProblemBase::addAuxScalarVariable(), FEProblemBase::addAuxVariable(), FEProblemBase::advanceMultiApps(), MultiApp::appProblem(), MooseMesh::buildSideList(), ChangeOverTimestepPostprocessor::ChangeOverTimestepPostprocessor(), AddVariableAction::determineType(), EigenProblem::EigenProblem(), Eigenvalue::Eigenvalue(), MooseMesh::elem(), UserForcingFunction::f(), FaceFaceConstraint::FaceFaceConstraint(), FunctionDT::FunctionDT(), RandomICBase::generateRandom(), MooseMesh::getBoundariesToElems(), DataFileInterface::getDataFileName(), DataFileInterface::getDataFileNameByName(), Control::getExecuteOptions(), FEProblemBase::getNonlinearSystem(), FEProblemBase::getUserObjects(), FEProblemBase::hasPostprocessor(), MatDiffusionBase< Real >::MatDiffusionBase(), MultiAppNearestNodeTransfer::MultiAppNearestNodeTransfer(), MultiAppShapeEvaluationTransfer::MultiAppShapeEvaluationTransfer(), MultiAppUserObjectTransfer::MultiAppUserObjectTransfer(), NodalScalarKernel::NodalScalarKernel(), MooseMesh::node(), FixedPointSolve::numPicardIts(), RelationshipManager::operator>=(), PercentChangePostprocessor::PercentChangePostprocessor(), ReferenceResidualConvergence::ReferenceResidualConvergence(), Residual::Residual(), MooseMesh::setBoundaryToNormalMap(), Exodus::setOutputDimension(), and UserForcingFunction::UserForcingFunction().

   {
     moose::internal::mooseDeprecatedStream(
         _console, false, true, _moose_base.errorPrefix("deprecation"), std::forward<Args>(args)...);
   }

◆ mooseDocumentedError()

template<typename... Args>

void MooseBaseErrorInterface::mooseDocumentedError	(	const std::string &	repo_name,
		const unsigned int	issue_num,
		Args &&...	args
	)		const

inlineinherited

Emits a documented error with object name and type.

Documented errors are errors that have an issue associated with them.

The repository name repo_name links a named repository to a URL and should be registered at the application level with registerRepository(). See Moose.C for an example of the "moose" repository registration.

Parameters

repo_name	The repository name where the issue resides
issue_num	The number of the issue
args	The error message to be combined

Definition at line 61 of file MooseBaseErrorInterface.h.

Referenced by ArrayDGLowerDKernel::ArrayDGLowerDKernel(), ArrayHFEMDirichletBC::ArrayHFEMDirichletBC(), ArrayLowerDIntegratedBC::ArrayLowerDIntegratedBC(), DGLowerDKernel::DGLowerDKernel(), HFEMDirichletBC::HFEMDirichletBC(), and LowerDIntegratedBC::LowerDIntegratedBC().

   {
     std::ostringstream oss;
     moose::internal::mooseStreamAll(oss, std::forward<Args>(args)...);
     const auto msg = moose::internal::formatMooseDocumentedError(repo_name, issue_num, oss.str());
     _moose_base.callMooseError(msg, /* with_prefix = */ true);
   }

◆ mooseError()

template<typename... Args>

void MooseBaseErrorInterface::mooseError ( Args &&... args ) const

inlineinherited

Emits an error prefixed with object name and type.

Definition at line 29 of file MooseBaseErrorInterface.h.

   {
     std::ostringstream oss;
     moose::internal::mooseStreamAll(oss, std::forward<Args>(args)...);
     _moose_base.callMooseError(oss.str(), /* with_prefix = */ true);
   }

◆ mooseErrorNonPrefixed()

template<typename... Args>

void MooseBaseErrorInterface::mooseErrorNonPrefixed ( Args &&... args ) const

inlineinherited

Emits an error without the prefixing included in mooseError().

Definition at line 40 of file MooseBaseErrorInterface.h.

   {
     std::ostringstream oss;
     moose::internal::mooseStreamAll(oss, std::forward<Args>(args)...);
     _moose_base.callMooseError(oss.str(), /* with_prefix = */ false);
   }

◆ mooseInfo()

template<typename... Args>

void MooseBaseErrorInterface::mooseInfo ( Args &&... args ) const

inlineinherited

Definition at line 98 of file MooseBaseErrorInterface.h.

Referenced by SetupRecoverFileBaseAction::act(), AStableDirk4::AStableDirk4(), MeshDiagnosticsGenerator::checkNonConformalMeshFromAdaptivity(), MultiAppGeneralFieldNearestLocationTransfer::evaluateInterpValuesNearestNode(), PIDTransientControl::execute(), Executioner::Executioner(), ExplicitRK2::ExplicitRK2(), ExplicitTVDRK2::ExplicitTVDRK2(), DataFileInterface::getDataFilePath(), MFEMScalarFESpace::getFECName(), MultiAppTransfer::getPointInTargetAppFrame(), ImplicitMidpoint::ImplicitMidpoint(), ParsedDownSelectionPositions::initialize(), PropertyReadFile::initialize(), MultiAppGeneralFieldTransfer::initialSetup(), InversePowerMethod::InversePowerMethod(), LStableDirk2::LStableDirk2(), LStableDirk3::LStableDirk3(), LStableDirk4::LStableDirk4(), PNGOutput::makeMeshFunc(), NonlinearEigen::NonlinearEigen(), SolutionInvalidityOutput::output(), MultiAppGeneralFieldTransfer::outputValueConflicts(), ProjectionAux::ProjectionAux(), ReferenceResidualConvergence::ReferenceResidualConvergence(), MFEMDataCollection::registerFields(), FEProblemBase::setRestartFile(), SolutionUserObjectBase::SolutionUserObjectBase(), SymmetryTransformGenerator::SymmetryTransformGenerator(), TransientBase::takeStep(), and TransientBase::TransientBase().

   {
     moose::internal::mooseInfoStream(
         _console, _moose_base.errorPrefix("information"), std::forward<Args>(args)...);
   }

◆ mooseWarning()

template<typename... Args>

void MooseBaseErrorInterface::mooseWarning ( Args &&... args ) const

inlineinherited

Emits a warning prefixed with object name and type.

Definition at line 75 of file MooseBaseErrorInterface.h.

Referenced by CopyMeshPartitioner::_do_partition(), AddKernelAction::act(), MeshOnlyAction::act(), AddFunctionAction::act(), MaterialOutputAction::act(), CommonOutputAction::act(), MFEMProblem::addFunction(), MooseMesh::addPeriodicVariable(), DiracKernelBase::addPoint(), BoundaryMarker::BoundaryMarker(), DistributedRectilinearMeshGenerator::buildCube(), MultiAppVariableValueSamplePostprocessorTransfer::cacheElemToPostprocessorData(), CartesianMeshGenerator::CartesianMeshGenerator(), CheckOutputAction::checkConsoleOutput(), MultiAppTransfer::checkMultiAppExecuteOn(), MeshDiagnosticsGenerator::checkNonMatchingEdges(), ActionComponent::checkRequiredTasks(), PhysicsBase::checkRequiredTasks(), SampledOutput::cloneMesh(), MultiAppGeneralFieldTransfer::closestToPosition(), VariableValueElementSubdomainModifier::computeSubdomainID(), GapValueAux::computeValue(), MultiApp::createApp(), DebugResidualAux::DebugResidualAux(), MeshDiagnosticsGenerator::diagnosticsLog(), CylindricalGridDivision::divisionIndex(), SphericalGridDivision::divisionIndex(), CartesianGridDivision::divisionIndex(), ElementMaterialSampler::ElementMaterialSampler(), Postprocessor::evaluateDotWarning(), MeshDivisionFunctorReductionVectorPostprocessor::execute(), ElementQualityChecker::finalize(), FiniteDifferencePreconditioner::FiniteDifferencePreconditioner(), FixedPointSolve::FixedPointSolve(), SubdomainPerElementGenerator::generate(), StitchedMeshGenerator::generate(), ParsedGenerateSideset::generate(), MultiAppTransfer::getAppInfo(), FunctorBinnedValuesDivision::getBinIndex(), DataFileInterface::getDataFilePath(), PointSamplerBase::getLocalElemContainingPoint(), FEProblemBase::getMaterial(), LineValueSampler::getValue(), Terminator::handleMessage(), IndicatorMarker::IndicatorMarker(), CylindricalGridDivision::initialize(), SphericalGridDivision::initialize(), ElementGroupCentroidPositions::initialize(), CartesianGridDivision::initialize(), MultiAppGeneralFieldNearestLocationTransfer::initialSetup(), BoundsBase::initialSetup(), ReferenceResidualConvergence::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), FEProblemBase::initialSetup(), AdvancedOutput::initPostprocessorOrVectorPostprocessorLists(), MaterialBase::initStatefulProperties(), LeastSquaresFit::LeastSquaresFit(), IterationAdaptiveDT::limitDTToPostprocessorValue(), FEProblemBase::mesh(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), NewmarkBeta::NewmarkBeta(), NodalPatchRecovery::NodalPatchRecovery(), NonlocalIntegratedBC::NonlocalIntegratedBC(), NonlocalKernel::NonlocalKernel(), Output::Output(), MultiAppGeneralFieldTransfer::outputValueConflicts(), PiecewiseConstantFromCSV::PiecewiseConstantFromCSV(), Executioner::problem(), PropertyReadFile::readData(), TestSourceStepper::rejectStep(), PhysicsBase::reportPotentiallyMissedParameters(), MaterialBase::resetQpProperties(), SecondTimeDerivativeAux::SecondTimeDerivativeAux(), MooseMesh::setCoordSystem(), SidesetAroundSubdomainUpdater::SidesetAroundSubdomainUpdater(), FEProblemBase::sizeZeroes(), TransientMultiApp::solveStep(), Tecplot::Tecplot(), TimeDerivativeAux::TimeDerivativeAux(), Checkpoint::updateCheckpointFiles(), SampledOutput::updateSample(), PiecewiseConstantFromCSV::value(), and VariableCondensationPreconditioner::VariableCondensationPreconditioner().

   {
     moose::internal::mooseWarningStream(
         _console, _moose_base.errorPrefix("warning"), std::forward<Args>(args)...);
   }

◆ mooseWarningNonPrefixed()

template<typename... Args>

void MooseBaseErrorInterface::mooseWarningNonPrefixed ( Args &&... args ) const

inlineinherited

Emits a warning without the prefixing included in mooseWarning().

Definition at line 85 of file MooseBaseErrorInterface.h.

   {
     moose::internal::mooseWarningStream(_console, std::forward<Args>(args)...);
   }

◆ name()

virtual const std::string& MooseBase::name ( ) const

inlinevirtualinherited

Get the name of the class.

Returns: The name of the class

Reimplemented in MooseVariableBase.

Definition at line 57 of file MooseBase.h.

57 { return _name; }

MooseBase::_name

const std::string _name

The name of this class.

Definition: MooseBase.h:90

◆ paramError()

template<typename... Args>

void MooseBaseParameterInterface::paramError	(	const std::string &	param,
		Args...	args
	)		const

inherited

Emits an error prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseError - only printing a message using the given args.

Definition at line 255 of file MooseBaseParameterInterface.h.

 {
   Moose::show_trace = false;
   _moose_base.callMooseError(paramErrorMsg(param, std::forward<Args>(args)...),
                              /* with_prefix = */ false);
   Moose::show_trace = true;
 }

◆ parameters()

const InputParameters& MooseBaseParameterInterface::parameters ( ) const

inlineinherited

Get the parameters of the object.

Returns: The parameters of the object

Definition at line 62 of file MooseBaseParameterInterface.h.

62 { return _pars; }

MooseBaseParameterInterface::_pars

const InputParameters & _pars

Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.

Definition: MooseBaseParameterInterface.h:173

◆ paramInfo()

template<typename... Args>

void MooseBaseParameterInterface::paramInfo	(	const std::string &	param,
		Args...	args
	)		const

inherited

Emits an informational message prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseInfo - only printing a message using the given args.

Definition at line 272 of file MooseBaseParameterInterface.h.

Referenced by GridPartitioner::_do_partition(), ComboMarker::ComboMarker(), Control::Control(), FunctorIC::FunctorIC(), and TransientMultiApp::TransientMultiApp().

 {
   mooseInfo(paramErrorMsg(param, std::forward<Args>(args)...));
 }

◆ paramWarning()

template<typename... Args>

void MooseBaseParameterInterface::paramWarning	(	const std::string &	param,
		Args...	args
	)		const

inherited

Emits a warning prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseWarning - only printing a message using the given args.

Definition at line 265 of file MooseBaseParameterInterface.h.

Referenced by GridPartitioner::_do_partition(), EigenProblem::checkProblemIntegrity(), CombinerGenerator::copyIntoMesh(), DefaultMultiAppFixedPointConvergence::DefaultMultiAppFixedPointConvergence(), MultiAppNearestNodeTransfer::execute(), FEProblemSolve::FEProblemSolve(), UniqueExtraIDMeshGenerator::generate(), PlaneIDMeshGenerator::generate(), Terminator::initialSetup(), SampledOutput::initSample(), MooseMesh::MooseMesh(), FEProblemBase::setPreserveMatrixSparsityPattern(), and Terminator::Terminator().

 {
   mooseWarning(paramErrorMsg(param, std::forward<Args>(args)...));
 }

◆ perfGraph()

PerfGraph & PerfGraphInterface::perfGraph ( )

inherited

Get the PerfGraph.

Definition at line 78 of file PerfGraphInterface.C.

Referenced by CommonOutputAction::act(), PerfGraphData::finalize(), and PerfGraphOutput::output().

 {
   return _pg_moose_app.perfGraph();
 }

◆ possibleDirections()

static std::string Transfer::possibleDirections ( )

inlinestaticinherited

Used to construct InputParameters.

Definition at line 76 of file Transfer.h.

Referenced by Transfer::validParams().

76 { return "to_multiapp from_multiapp between_multiapp"; }

◆ queryParam()

template<typename T >

const T * MooseBaseParameterInterface::queryParam ( const std::string & name ) const

inherited

Query a parameter for the object.

If the parameter is not valid, nullptr will be returned

Parameters

name	The name of the parameter

Returns: A pointer to the parameter value, if it exists

Definition at line 222 of file MooseBaseParameterInterface.h.

 {
   return isParamValid(name) ? &getParam<T>(name) : nullptr;
 }

◆ registerTimedSection() [1/2]

PerfID PerfGraphInterface::registerTimedSection	(	const std::string &	section_name,
		const unsigned int	level
	)		const

protectedinherited

Call to register a named section for timing.

Parameters

section_name	The name of the code section to be timed
level	The importance of the timer - lower is more important (0 will always come out)

Returns: The ID of the section - use when starting timing

Definition at line 53 of file PerfGraphInterface.C.

 {
   const auto timed_section_name = timedSectionName(section_name);
   if (!moose::internal::getPerfGraphRegistry().sectionExists(timed_section_name))
     return moose::internal::getPerfGraphRegistry().registerSection(timed_section_name, level);
   else
     return moose::internal::getPerfGraphRegistry().sectionID(timed_section_name);
 }

◆ registerTimedSection() [2/2]

PerfID PerfGraphInterface::registerTimedSection	(	const std::string &	section_name,
		const unsigned int	level,
		const std::string &	live_message,
		const bool	print_dots = `true`
	)		const

protectedinherited

Call to register a named section for timing.

Parameters

section_name	The name of the code section to be timed
level	The importance of the timer - lower is more important (0 will always come out)
live_message	The message to be printed to the screen during execution
print_dots	Whether or not progress dots should be printed for this section

Returns: The ID of the section - use when starting timing

Definition at line 64 of file PerfGraphInterface.C.

 {
   const auto timed_section_name = timedSectionName(section_name);
   if (!moose::internal::getPerfGraphRegistry().sectionExists(timed_section_name))
     return moose::internal::getPerfGraphRegistry().registerSection(
         timedSectionName(section_name), level, live_message, print_dots);
   else
     return moose::internal::getPerfGraphRegistry().sectionID(timed_section_name);
 }

◆ residualSetup()

void SetupInterface::residualSetup ( )

virtualinherited

Gets called just before the residual is computed and before this object is asked to do its job.

Reimplemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, MooseVariableField< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, Function, NodeFaceConstraint, Positions, and Times.

Definition at line 56 of file SetupInterface.C.

Referenced by MooseVariableField< Real >::residualSetup(), ComputeFVFluxResidualThread< RangeType >::setup(), and ComputeFVFluxRJThread< RangeType >::setup().

57 {

58 }

◆ restartableName()

std::string Restartable::restartableName ( const std::string & data_name ) const

protectedinherited

Gets the name of a piece of restartable data given a data name, adding the system name and object name prefix.

This should only be used in this interface and in testing.

Definition at line 66 of file Restartable.C.

Referenced by Restartable::declareRecoverableData(), and Restartable::declareRestartableDataHelper().

 {
   return _restartable_system_name + "/" + _restartable_name + "/" + data_name;
 }

◆ setCurrentDirection()

void Transfer::setCurrentDirection ( const int direction )

inlineinherited

Set this Transfer to be executed in a given direction.

Definition at line 89 of file Transfer.h.

Referenced by FEProblemBase::execMultiAppTransfers().

   {
     _current_direction = direction;
     _direction = direction;
   }

◆ subdomainSetup()

void SetupInterface::subdomainSetup ( )

virtualinherited

Gets called when the subdomain changes (i.e.

in a Jacobian or residual loop) and before this object is asked to do its job

Reimplemented in MaterialBase, Material, GeneralUserObject, NodalUserObject, Constraint, and ThreadedGeneralUserObject.

Definition at line 61 of file SetupInterface.C.

62 {

63 }

◆ timedSectionName()

std::string PerfGraphInterface::timedSectionName ( const std::string & section_name ) const

protectedinherited

Returns: The name of the timed section with the name section_name.

Optionally adds a prefix if one is defined.

Definition at line 47 of file PerfGraphInterface.C.

Referenced by PerfGraphInterface::registerTimedSection().

 {
   return _prefix.empty() ? "" : (_prefix + "::") + section_name;
 }

◆ timestepSetup()

void SetupInterface::timestepSetup ( )

virtualinherited

Gets called at the beginning of the timestep before this object is asked to do its job.

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, MooseVariableField< Real >, Function, Positions, Times, SolutionUserObjectBase, Console, VectorPostprocessorVisualizationAux, EqualValueEmbeddedConstraintTempl< is_ad >, NumNonlinearIterations, VectorMemoryUsage, JSONOutput, and MemoryUsage.

Definition at line 46 of file SetupInterface.C.

Referenced by JSONOutput::timestepSetup(), and MooseVariableField< Real >::timestepSetup().

47 {

48 }

◆ transfer()

void MultiAppDofCopyTransfer::transfer	(	FEProblemBase &	to_problem,
		FEProblemBase &	from_problem
	)

protectedinherited

Performs the transfer of a variable between two problems if they have the same mesh.

Definition at line 146 of file MultiAppDofCopyTransfer.C.

Referenced by execute().

 {
   // Perform error checking
   if (!getToVarNames().size())
     mooseError("No transferred variables were specified, neither programmatically or through the "
                "'source_variable' parameter");
   if (getToVarNames().size() != getFromVarNames().size())
     mooseError("Number of variables transferred must be same in both systems.");
   for (auto & to_var : getToVarNames())
     checkVariable(to_problem, to_var);
   for (auto & from_var : getFromVarNames())
     checkVariable(from_problem, from_var);
 
   for (unsigned int v = 0; v < getToVarNames().size(); ++v)
   {
     // Populate the to/from variables needed to perform the transfer
     MooseVariableFEBase & to_var = to_problem.getVariable(
         0, getToVarNames()[v], Moose::VarKindType::VAR_ANY, Moose::VarFieldType::VAR_FIELD_ANY);
     MeshBase & to_mesh = to_problem.mesh().getMesh();
 
     MooseVariableFEBase & from_var = from_problem.getVariable(
         0, getFromVarNames()[v], Moose::VarKindType::VAR_ANY, Moose::VarFieldType::VAR_FIELD_ANY);
     MeshBase & from_mesh = from_problem.mesh().getMesh();
 
     auto & to_solution = isParamValid("to_solution_tag")
                              ? to_var.sys().getVector(
                                    to_problem.getVectorTagID(getParam<TagName>("to_solution_tag")))
                              : to_var.sys().solution();
     auto & from_solution = isParamValid("from_solution_tag")
                                ? from_var.sys().getVector(from_problem.getVectorTagID(
                                      getParam<TagName>("from_solution_tag")))
                                : from_var.sys().solution();
 
     // Check integrity
     if (to_var.feType() != from_var.feType())
       mooseError("MultiAppFieldTransfer '",
                  name(),
                  "'requires that the target variable '",
                  to_var.name(),
                  "' and the source variable'",
                  from_var.name(),
                  "' must be the same type "
                  "(order and family): ",
                  libMesh::Utility::enum_to_string<FEFamily>(to_var.feType().family),
                  moose::internal::incompatVarMsg(to_var, from_var));
     if (to_var.fieldType() != from_var.fieldType())
       mooseError(
           "Corresponding transfer variables must be same field type (STANDARD | VECTOR | ARRAY).");
     if (to_var.count() != from_var.count())
       mooseError("Corresponding transfer variables must have same number of components.");
 
     if ((to_mesh.n_nodes() != from_mesh.n_nodes()) || (to_mesh.n_elem() != from_mesh.n_elem()))
       mooseError("The meshes must be identical to utilize MultiAppDofCopyTransfer::transfer.");
 
     // Transfer node dofs. Block restriction is not supported, forbidden in initialSetup
     for (const auto & node : as_range(to_mesh.local_nodes_begin(), to_mesh.local_nodes_end()))
       transferDofObject(
           node, from_mesh.node_ptr(node->id()), to_var, from_var, to_solution, from_solution);
 
     // Transfer elem dofs
     for (auto & to_elem : as_range(to_mesh.local_elements_begin(), to_mesh.local_elements_end()))
     {
       Elem * from_elem = from_mesh.elem_ptr(to_elem->id());
       mooseAssert(to_elem->type() == from_elem->type(), "The elements must be the same type.");
 
       // Examine block restriction
       if (_has_block_restrictions)
       {
         SubdomainID from_block = from_elem->subdomain_id();
         if (std::find(_from_blocks.begin(), _from_blocks.end(), from_block) == _from_blocks.end())
           continue;
 
         SubdomainID to_block = to_elem->subdomain_id();
         if (std::find(_to_blocks.begin(), _to_blocks.end(), to_block) == _to_blocks.end())
           continue;
       }
 
       transferDofObject(to_elem, from_elem, to_var, from_var, to_solution, from_solution);
     }
 
     to_solution.close();
     to_var.sys().update();
   }
 }

◆ transferDofObject()

void MultiAppDofCopyTransfer::transferDofObject	(	libMesh::DofObject *	to_object,
		libMesh::DofObject *	from_object,
		MooseVariableFieldBase &	to_var,
		MooseVariableFieldBase &	from_var,
		NumericVector< Number > &	to_solution,
		NumericVector< Number > &	from_solution
	)

protectedinherited

Performs the transfer of values between a node or element.

Definition at line 232 of file MultiAppDofCopyTransfer.C.

Referenced by MultiAppDofCopyTransfer::transfer().

 {
   for (unsigned int vc = 0; vc < to_var.count(); ++vc)
     // Transfer from one solution vector to another
     if (to_object->n_dofs(to_var.sys().number(), to_var.number() + vc) >
         0) // If this variable has dofs at this node
       for (unsigned int comp = 0;
            comp < to_object->n_comp(to_var.sys().number(), to_var.number() + vc);
            ++comp)
       {
         dof_id_type dof = to_object->dof_number(to_var.sys().number(), to_var.number() + vc, comp);
         dof_id_type from_dof =
             from_object->dof_number(from_var.sys().number(), from_var.number() + vc, comp);
         Real from_value = from_solution(from_dof);
         to_solution.set(dof, from_value);
       }
 }

◆ transformBoundingBox()

void MultiAppTransfer::transformBoundingBox	(	libMesh::BoundingBox &	box,
		const MultiAppCoordTransform &	transform
	)

staticprotectedinherited

Transform a bounding box according to the transformations in the provided coordinate transformation object.

Definition at line 449 of file MultiAppTransfer.C.

Referenced by MultiAppTransfer::getFromBoundingBoxes(), and MultiAppGeneralFieldTransfer::getRestrictedFromBoundingBoxes().

 {
   MultiApp::transformBoundingBox(box, transform);
 }

◆ type()

const std::string& MooseBase::type ( ) const

inlineinherited

Get the type of this class.

Returns: the name of the type of this class

Definition at line 51 of file MooseBase.h.

51 { return _type; }

MooseBase::_type

const std::string _type

The type of this class.

Definition: MooseBase.h:87

◆ typeAndName()

std::string MooseBase::typeAndName ( ) const

inherited

Get the class's combined type and name; useful in error handling.

Returns: The type and name of this class in the form '<type()> "<name()>"'.

Definition at line 27 of file MooseBase.C.

Referenced by MaterialPropertyStorage::addProperty(), MeshGeneratorSystem::dataDrivenError(), ReporterContext< std::vector< T > >::finalize(), and ReporterData::getReporterInfo().

 {
   return type() + std::string(" \"") + name() + std::string("\"");
 }

◆ uniqueName()

MooseObjectName MooseBaseParameterInterface::uniqueName ( ) const

inlineinherited

The unique name for accessing input parameters of this object in the InputParameterWarehouse.

Definition at line 67 of file MooseBaseParameterInterface.h.

Referenced by MooseBaseParameterInterface::connectControllableParams(), and Action::uniqueActionName().

   {
     return MooseObjectName(_pars.get<std::string>("_unique_name"));
   }

◆ uniqueParameterName()

MooseObjectParameterName MooseBaseParameterInterface::uniqueParameterName ( const std::string & parameter_name ) const

inlineinherited

The unique parameter name of a valid parameter of this object for accessing parameter controls.

Definition at line 52 of file MooseBaseParameterInterface.h.

   {
     return MooseObjectParameterName(
         _pars.get<std::string>("_moose_base"), _moose_base.name(), parameter_name);
   }

◆ validParams()

InputParameters MultiAppCopyTransfer::validParams ( )

static

Definition at line 22 of file MultiAppCopyTransfer.C.

 {
   InputParameters params = MultiAppDofCopyTransfer::validParams();
   params.addRequiredParam<std::vector<AuxVariableName>>(
       "variable", "The auxiliary variable to store the transferred values in.");
   params.addRequiredParam<std::vector<VariableName>>("source_variable",
                                                      "The variable to transfer from.");
 
   params.addClassDescription(
       "Copies variables (nonlinear and auxiliary) between multiapps that have identical meshes.");
   return params;
 }

◆ variableIntegrityCheck()

void MultiAppTransfer::variableIntegrityCheck	(	const AuxVariableName &	var_name,
		bool	is_from_multiapp
	)		const

inherited

Utility to verify that the variable in the destination system exists.

Definition at line 186 of file MultiAppTransfer.C.

Referenced by MultiAppFieldTransfer::initialSetup(), and MultiAppVariableValueSampleTransfer::initialSetup().

 {
   bool variable_found = false;
   bool has_an_app = false;
 
   // Check the from_multi_app for the variable
   if (is_from_multiapp && _from_multi_app)
     for (unsigned int i = 0; i < _from_multi_app->numGlobalApps(); i++)
       if (_from_multi_app->hasLocalApp(i))
       {
         has_an_app = true;
         if (_from_multi_app->appProblemBase(i).hasVariable(var_name))
           variable_found = true;
       }
 
   // Check the to_multi_app for the variable
   if (!is_from_multiapp && _to_multi_app)
     for (unsigned int i = 0; i < _to_multi_app->numGlobalApps(); i++)
       if (_to_multi_app->hasLocalApp(i))
       {
         has_an_app = true;
         if (_to_multi_app->appProblemBase(i).hasVariable(var_name))
           variable_found = true;
       }
 
   if (!variable_found && has_an_app)
     mooseError("Cannot find variable ", var_name, " for ", name(), " Transfer");
 }

Member Data Documentation

◆ _action_factory

ActionFactory& MooseBaseParameterInterface::_action_factory

protectedinherited

Builds Actions.

Definition at line 179 of file MooseBaseParameterInterface.h.

Referenced by AddActionComponentAction::act(), CreateMeshSetupActionsForComponents::act(), ActionComponent::checkRequiredTasks(), PhysicsBase::checkRequiredTasks(), CommonOutputAction::create(), AddVariableAction::createInitialConditionAction(), DynamicObjectRegistrationAction::DynamicObjectRegistrationAction(), CreateExecutionerAction::setupAutoPreconditioning(), and ReadExecutorParamsAction::setupAutoPreconditioning().

◆ _app

MooseApp& MooseBase::_app

protectedinherited

The MOOSE application this is associated with.

Definition at line 84 of file MooseBase.h.

◆ _bbox_factor

Real MultiAppTransfer::_bbox_factor

protectedinherited

Extend (or contract) bounding box by a factor in all directions Greater than one values of this member may be necessary because the nearest bounding box does not necessarily give you the closest node/element.

It will depend on the partition and geometry. A node/element will more likely find its nearest source element/node by extending bounding boxes. If each of the bounding boxes covers the entire domain, a node/element will be able to find its nearest source element/node for sure, but at the same time, more communication will be involved and can be expensive.

Definition at line 167 of file MultiAppTransfer.h.

Referenced by MultiAppTransfer::getFromBoundingBoxes().

◆ _console

const ConsoleStream ConsoleStreamInterface::_console

inherited

An instance of helper class to write streams to the Console objects.

Definition at line 31 of file ConsoleStreamInterface.h.

◆ _current_direction

MooseEnum Transfer::_current_direction

protectedinherited

Definition at line 106 of file Transfer.h.

◆ _current_execute_flag

const ExecFlagType& SetupInterface::_current_execute_flag

protectedinherited

Reference to FEProblemBase.

Definition at line 78 of file SetupInterface.h.

Referenced by PseudoTimestep::execute().

◆ _direction

MooseEnum Transfer::_direction

protectedinherited

The current direction that is being executed for this Transfer. _direction is to be deprecated for _current_direction

Definition at line 105 of file Transfer.h.

Referenced by Transfer::direction(), MultiAppTransfer::MultiAppTransfer(), Transfer::setCurrentDirection(), and Transfer::Transfer().

◆ _directions

MultiMooseEnum Transfer::_directions

protectedinherited

The directions this Transfer is to be executed on.

Definition at line 110 of file Transfer.h.

◆ _displaced_source_mesh

bool MultiAppTransfer::_displaced_source_mesh

protectedinherited

True if displaced mesh is used for the source mesh, otherwise false.

Definition at line 155 of file MultiAppTransfer.h.

Referenced by MultiAppGeneralFieldNearestLocationTransfer::buildKDTrees(), MultiAppGeneralFieldShapeEvaluationTransfer::buildMeshFunctions(), MultiAppUserObjectTransfer::execute(), MultiAppGeometricInterpolationTransfer::fillSourceInterpolationPoints(), MultiAppUserObjectTransfer::findSubAppToTransferFrom(), MultiAppGeneralFieldTransfer::getAppInfo(), MultiAppTransfer::getAppInfo(), MultiAppGeneralFieldTransfer::getRestrictedFromBoundingBoxes(), MultiAppGeneralFieldTransfer::initialSetup(), MultiAppGeneralFieldTransfer::prepareToTransfer(), and MultiAppShapeEvaluationTransfer::transferVariable().

◆ _displaced_target_mesh

bool MultiAppTransfer::_displaced_target_mesh

protectedinherited

True if displaced mesh is used for the target mesh, otherwise false.

Definition at line 157 of file MultiAppTransfer.h.

Referenced by MultiAppGeneralFieldTransfer::cacheIncomingInterpVals(), MultiAppGeneralFieldTransfer::examineLocalValueConflicts(), MultiAppGeneralFieldTransfer::examineReceivedValueConflicts(), MultiAppUserObjectTransfer::execute(), MultiAppGeneralFieldTransfer::extractOutgoingPoints(), MultiAppTransfer::getAppInfo(), MultiAppGeneralFieldTransfer::initialSetup(), MultiAppGeometricInterpolationTransfer::interpolateTargetPoints(), MultiAppGeneralFieldTransfer::prepareToTransfer(), and MultiAppGeneralFieldTransfer::setSolutionVectorValues().

◆ _enabled

const bool& MooseObject::_enabled

protectedinherited

Reference to the "enable" InputParameters, used by Controls for toggling on/off MooseObjects.

Definition at line 51 of file MooseObject.h.

Referenced by MooseObject::enabled().

◆ _execute_enum

const ExecFlagEnum& SetupInterface::_execute_enum

protectedinherited

Execute settings for this object.

Definition at line 75 of file SetupInterface.h.

Referenced by ChangeOverFixedPointPostprocessor::ChangeOverFixedPointPostprocessor(), ChangeOverTimePostprocessor::ChangeOverTimePostprocessor(), FunctorADConverterTempl< T >::FunctorADConverterTempl(), FunctorSmootherTempl< T >::FunctorSmootherTempl(), GenericFunctorGradientMaterialTempl< is_ad >::GenericFunctorGradientMaterialTempl(), GenericFunctorMaterialTempl< is_ad >::GenericFunctorMaterialTempl(), GenericFunctorTimeDerivativeMaterialTempl< is_ad >::GenericFunctorTimeDerivativeMaterialTempl(), GenericVectorFunctorMaterialTempl< is_ad >::GenericVectorFunctorMaterialTempl(), SetupInterface::getExecuteOnEnum(), JSONOutput::outputReporters(), XMLOutput::outputVectorPostprocessors(), ParsedFunctorMaterialTempl< is_ad >::ParsedFunctorMaterialTempl(), PiecewiseByBlockFunctorMaterialTempl< T >::PiecewiseByBlockFunctorMaterialTempl(), and VectorMagnitudeFunctorMaterialTempl< is_ad >::VectorMagnitudeFunctorMaterialTempl().

◆ _factory

Factory& MooseBaseParameterInterface::_factory

protectedinherited

The Factory associated with the MooseApp.

Definition at line 176 of file MooseBaseParameterInterface.h.

Referenced by ElementIDOutputAction::act(), AutoCheckpointAction::act(), PartitionerAction::act(), CreateExecutionerAction::act(), CreateProblemAction::act(), CreateProblemDefaultAction::act(), SetupMeshAction::act(), AdaptivityAction::act(), CombineComponentsMeshes::act(), SetupPredictorAction::act(), SetupTimeStepperAction::act(), ComposeTimeStepperAction::act(), SetupDebugAction::act(), SetupPreconditionerAction::act(), SetupResidualDebugAction::act(), CreateDisplacedProblemAction::act(), MaterialDerivativeTestAction::act(), SetAdaptivityOptionsAction::act(), DisplayGhostingAction::act(), AddControlAction::act(), MaterialOutputAction::act(), AddPeriodicBCAction::act(), CommonOutputAction::act(), AddNodalNormalsAction::act(), ComponentMeshTransformHelper::addMeshGenerators(), CylinderComponent::addMeshGenerators(), DiffusionPhysicsBase::addPostprocessors(), CreateDisplacedProblemAction::addProxyRelationshipManagers(), Action::addRelationshipManager(), SampledOutput::cloneMesh(), MooseBaseParameterInterface::connectControllableParams(), DynamicObjectRegistrationAction::DynamicObjectRegistrationAction(), ActionComponent::getFactory(), PhysicsBase::getFactory(), MaterialOutputAction::getParams(), and ProjectedStatefulMaterialStorageAction::processProperty().

◆ _fe_problem

FEProblemBase& Transfer::_fe_problem

protectedinherited

Definition at line 97 of file Transfer.h.

Referenced by MultiAppGeneralFieldTransfer::acceptPointInOriginMesh(), MultiAppVariableValueSamplePostprocessorTransfer::cacheElemToPostprocessorData(), MultiAppGeneralFieldTransfer::closestToPosition(), MultiAppGeneralFieldNearestLocationTransfer::computeNumSources(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppPostprocessorTransfer::execute(), MultiAppGeneralFieldUserObjectTransfer::execute(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppVectorPostprocessorTransfer::executeToMultiapp(), MultiAppGeneralFieldNearestLocationTransfer::getNumDivisions(), MultiAppCloneReporterTransfer::initialSetup(), MultiAppGeneralFieldTransfer::locatePointReceivers(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), MultiAppGeometricInterpolationTransfer::MultiAppGeometricInterpolationTransfer(), MultiAppTransfer::MultiAppTransfer(), MultiAppUserObjectTransfer::MultiAppUserObjectTransfer(), and MultiAppVariableValueSamplePostprocessorTransfer::MultiAppVariableValueSamplePostprocessorTransfer().

◆ _from_blocks

std::set<SubdomainID> MultiAppDofCopyTransfer::_from_blocks

protectedinherited

Subdomain IDs of the blocks to transfer from.

Definition at line 50 of file MultiAppDofCopyTransfer.h.

Referenced by MultiAppDofCopyTransfer::initialSetup(), and MultiAppDofCopyTransfer::transfer().

◆ _from_es

std::vector<libMesh::EquationSystems *> MultiAppTransfer::_from_es

protectedinherited

Definition at line 142 of file MultiAppTransfer.h.

Referenced by MultiAppTransfer::getAppInfo().

◆ _from_local2global_map

std::vector<unsigned int> MultiAppTransfer::_from_local2global_map

protectedinherited

Given local app index, returns global app index.

Definition at line 199 of file MultiAppTransfer.h.

Referenced by MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppTransfer::getAppInfo(), MultiAppTransfer::getFromMultiAppInfo(), MultiAppTransfer::getGlobalSourceAppIndex(), MultiAppGeneralFieldTransfer::getGlobalStartAppPerProc(), MultiAppTransfer::getLocalSourceAppIndex(), MultiAppGeneralFieldTransfer::outputValueConflicts(), and MultiAppShapeEvaluationTransfer::transferVariable().

◆ _from_meshes

std::vector<MooseMesh *> MultiAppTransfer::_from_meshes

protectedinherited

Definition at line 144 of file MultiAppTransfer.h.

Referenced by MultiAppGeneralFieldTransfer::acceptPointInOriginMesh(), MultiAppNearestNodeTransfer::execute(), MultiAppTransfer::getAppInfo(), MultiAppTransfer::getFromBoundingBoxes(), MultiAppGeneralFieldNearestLocationTransfer::getNumAppsPerTree(), MultiAppGeneralFieldNearestLocationTransfer::getNumDivisions(), and MultiAppGeneralFieldTransfer::getRestrictedFromBoundingBoxes().

◆ _from_positions

std::vector<Point> MultiAppTransfer::_from_positions

protectedinherited

Definition at line 146 of file MultiAppTransfer.h.

Referenced by MultiAppTransfer::getAppInfo(), MultiAppTransfer::getFromMultiAppInfo(), and MultiAppGeneralFieldNearestLocationTransfer::getPointInLocalSourceFrame().

◆ _from_problems

std::vector<FEProblemBase *> MultiAppTransfer::_from_problems

protectedinherited

Definition at line 140 of file MultiAppTransfer.h.

◆ _from_transforms

std::vector<std::unique_ptr<MultiAppCoordTransform> > MultiAppTransfer::_from_transforms

protectedinherited

Definition at line 148 of file MultiAppTransfer.h.

◆ _from_var_name

VariableName MultiAppCopyTransfer::_from_var_name

protected

Name of variables transferring from.

Definition at line 47 of file MultiAppCopyTransfer.h.

Referenced by MultiAppCopyTransfer().

◆ _from_var_names

const std::vector<VariableName> MultiAppCopyTransfer::_from_var_names

protected

Name of variables transferring from.

Definition at line 41 of file MultiAppCopyTransfer.h.

Referenced by getFromVarNames(), and MultiAppCopyTransfer().

◆ _has_block_restrictions

const bool MultiAppDofCopyTransfer::_has_block_restrictions

protectedinherited

Whether block restriction is active.

Definition at line 48 of file MultiAppDofCopyTransfer.h.

Referenced by MultiAppDofCopyTransfer::initialSetup(), and MultiAppDofCopyTransfer::transfer().

◆ _multi_app

std::shared_ptr<MultiApp> MultiAppTransfer::_multi_app

protectedinherited

Deprecated class attribute for compatibility with the apps.

Definition at line 137 of file MultiAppTransfer.h.

Referenced by MultiAppUserObjectTransfer::execute(), MultiAppUserObjectTransfer::findSubAppToTransferFrom(), MultiAppTransfer::getMultiApp(), and MultiAppTransfer::MultiAppTransfer().

◆ _name

const std::string MooseBase::_name

protectedinherited

The name of this class.

Definition at line 90 of file MooseBase.h.

◆ _pars

const InputParameters& MooseBaseParameterInterface::_pars

protectedinherited

Parameters of this object, references the InputParameters stored in the InputParametersWarehouse.

Definition at line 173 of file MooseBaseParameterInterface.h.

◆ _pg_moose_app

MooseApp& PerfGraphInterface::_pg_moose_app

protectedinherited

The MooseApp that owns the PerfGraph.

Definition at line 124 of file PerfGraphInterface.h.

Referenced by PerfGraphInterface::perfGraph().

◆ _prefix

const std::string PerfGraphInterface::_prefix

protectedinherited

A prefix to use for all sections.

Definition at line 127 of file PerfGraphInterface.h.

Referenced by PerfGraphInterface::timedSectionName().

◆ _restartable_app

MooseApp& Restartable::_restartable_app

protectedinherited

Reference to the application.

Definition at line 227 of file Restartable.h.

Referenced by Restartable::registerRestartableDataOnApp(), and Restartable::registerRestartableNameWithFilterOnApp().

◆ _restartable_read_only

const bool Restartable::_restartable_read_only

protectedinherited

Flag for toggling read only status (see ReporterData)

Definition at line 236 of file Restartable.h.

Referenced by Restartable::registerRestartableDataOnApp().

◆ _restartable_system_name

const std::string Restartable::_restartable_system_name

protectedinherited

The system name this object is in.

Definition at line 230 of file Restartable.h.

Referenced by Restartable::restartableName().

◆ _restartable_tid

const THREAD_ID Restartable::_restartable_tid

protectedinherited

The thread ID for this object.

Definition at line 233 of file Restartable.h.

Referenced by Restartable::declareRestartableDataHelper().

◆ _skip_coordinate_collapsing

const bool MultiAppTransfer::_skip_coordinate_collapsing

protectedinherited

Whether to skip coordinate collapsing (transformations of coordinates between applications using different frames of reference)

Definition at line 152 of file MultiAppTransfer.h.

Referenced by MultiAppGeneralFieldTransfer::acceptPointInOriginMesh(), MultiAppGeneralFieldTransfer::closestToPosition(), MultiAppGeneralFieldNearestLocationTransfer::evaluateInterpValuesNearestNode(), MultiAppTransfer::getAppInfo(), MultiAppGeneralFieldNearestLocationTransfer::getPointInLocalSourceFrame(), MultiAppTransfer::getPointInTargetAppFrame(), and MultiAppGeneralFieldTransfer::outputValueConflicts().

◆ _subproblem

SubProblem& Transfer::_subproblem

protectedinherited

Definition at line 96 of file Transfer.h.

◆ _sys

SystemBase& Transfer::_sys

protectedinherited

Definition at line 98 of file Transfer.h.

◆ _tid

THREAD_ID Transfer::_tid

protectedinherited

Definition at line 100 of file Transfer.h.

Referenced by MultiAppPostprocessorToAuxScalarTransfer::execute(), and MultiAppScalarToAuxScalarTransfer::execute().

◆ _to_blocks

std::set<SubdomainID> MultiAppDofCopyTransfer::_to_blocks

protectedinherited

Subdomain IDs of the blocks to transfer to.

Definition at line 52 of file MultiAppDofCopyTransfer.h.

Referenced by MultiAppDofCopyTransfer::initialSetup(), and MultiAppDofCopyTransfer::transfer().

◆ _to_es

std::vector<libMesh::EquationSystems *> MultiAppTransfer::_to_es

protectedinherited

Definition at line 141 of file MultiAppTransfer.h.

Referenced by MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppTransfer::getAppInfo(), and MultiAppShapeEvaluationTransfer::transferVariable().

◆ _to_local2global_map

std::vector<unsigned int> MultiAppTransfer::_to_local2global_map

protectedinherited

Given local app index, returns global app index.

Definition at line 197 of file MultiAppTransfer.h.

Referenced by MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppTransfer::getAppInfo(), MultiAppTransfer::getGlobalTargetAppIndex(), MultiAppTransfer::getToMultiAppInfo(), MultiAppTransfer::getTransferVector(), MultiAppGeneralFieldTransfer::outputValueConflicts(), and MultiAppShapeEvaluationTransfer::transferVariable().

◆ _to_meshes

std::vector<MooseMesh *> MultiAppTransfer::_to_meshes

protectedinherited

Definition at line 143 of file MultiAppTransfer.h.

Referenced by MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppTransfer::getAppInfo(), MultiAppGeneralFieldTransfer::getMaxToProblemsBBoxDimensions(), MultiAppNearestNodeTransfer::getTargetLocalNodes(), MultiAppGeneralFieldTransfer::locatePointReceivers(), MultiAppGeneralFieldTransfer::setSolutionVectorValues(), and MultiAppShapeEvaluationTransfer::transferVariable().

◆ _to_positions

std::vector<Point> MultiAppTransfer::_to_positions

protectedinherited

Definition at line 145 of file MultiAppTransfer.h.

Referenced by MultiAppTransfer::getAppInfo(), and MultiAppTransfer::getToMultiAppInfo().

◆ _to_problems

std::vector<FEProblemBase *> MultiAppTransfer::_to_problems

protectedinherited

Definition at line 139 of file MultiAppTransfer.h.

◆ _to_transforms

std::vector<std::unique_ptr<MultiAppCoordTransform> > MultiAppTransfer::_to_transforms

protectedinherited

Definition at line 147 of file MultiAppTransfer.h.

Referenced by MultiAppGeneralFieldTransfer::cacheIncomingInterpVals(), MultiAppGeneralFieldTransfer::cacheOutgoingPointInfo(), MultiAppPostprocessorInterpolationTransfer::execute(), MultiAppNearestNodeTransfer::execute(), MultiAppProjectionTransfer::execute(), MultiAppUserObjectTransfer::execute(), MultiAppGeometricInterpolationTransfer::execute(), MultiAppGeneralFieldTransfer::extractOutgoingPoints(), MultiAppTransfer::getAppInfo(), MultiAppTransfer::getPointInTargetAppFrame(), MultiAppGeneralFieldTransfer::locatePointReceivers(), MultiAppGeneralFieldTransfer::outputValueConflicts(), and MultiAppShapeEvaluationTransfer::transferVariable().

◆ _to_var_name

AuxVariableName MultiAppCopyTransfer::_to_var_name

protected

Name of variables transferring to.

Definition at line 49 of file MultiAppCopyTransfer.h.

Referenced by MultiAppCopyTransfer().

◆ _to_var_names

const std::vector<AuxVariableName> MultiAppCopyTransfer::_to_var_names

protected

Name of variables transferring to.

Definition at line 43 of file MultiAppCopyTransfer.h.

Referenced by getToVarNames(), and MultiAppCopyTransfer().

◆ _type

const std::string MooseBase::_type

protectedinherited

The type of this class.

Definition at line 87 of file MooseBase.h.

Referenced by ExplicitTimeIntegrator::ExplicitTimeIntegrator(), FEProblemSolve::FEProblemSolve(), FillBetweenCurvesGenerator::generate(), FillBetweenPointVectorsGenerator::generate(), FillBetweenSidesetsGenerator::generate(), ExplicitTimeIntegrator::init(), FEProblemBase::init(), MooseStaticCondensationPreconditioner::MooseStaticCondensationPreconditioner(), PhysicsBasedPreconditioner::PhysicsBasedPreconditioner(), FEProblemBase::solverTypeString(), and MooseBase::type().

◆ OutOfMeshValue

const Number Transfer::OutOfMeshValue = -999999

staticinherited

Definition at line 113 of file Transfer.h.

Referenced by MultiAppProjectionTransfer::execute(), and MultiAppShapeEvaluationTransfer::transferVariable().

The documentation for this class was generated from the following files:

include/transfers/MultiAppCopyTransfer.h
src/transfers/MultiAppCopyTransfer.C

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Static Protected Member Functions

Protected Attributes

Private Member Functions

Detailed Description

Member Typedef Documentation

◆ DataFileParameterType

Member Enumeration Documentation

◆ DIRECTION

Constructor & Destructor Documentation

◆ MultiAppCopyTransfer()

Member Function Documentation

◆ addBBoxFactorParam()

◆ addSkipCoordCollapsingParam()

◆ callMooseError()

◆ checkMultiAppExecuteOn()

◆ checkSiblingsTransferSupported()

◆ checkVariable()

◆ connectControllableParams()

◆ currentDirection()

◆ customSetup()

◆ declareManagedRestartableDataWithContext()

◆ declareRecoverableData()

◆ declareRestartableData()

◆ declareRestartableDataWithContext()

◆ declareRestartableDataWithObjectName()

◆ declareRestartableDataWithObjectNameWithContext()

◆ direction()

◆ directions()

◆ enabled()

◆ errorIfObjectExecutesOnTransferInSourceApp()

◆ errorPrefix()

◆ execute()

◆ extendBoundingBoxes()

◆ find_sys()

◆ getAppInfo()

◆ getCheckedPointerParam()

◆ getDataFileName()

◆ getDataFileNameByName()

◆ getDataFilePath()

◆ getEquationSystem()

◆ getExecuteOnEnum()

◆ getFromBoundingBoxes() [1/2]

◆ getFromBoundingBoxes() [2/2]

◆ getFromMultiApp()

◆ getFromName()

◆ getFromsPerProc()

◆ getFromVarNames()

◆ getGlobalSourceAppIndex()

◆ getGlobalTargetAppIndex()

◆ getLocalSourceAppIndex()

◆ getMooseApp()

◆ getMultiApp()

◆ getParam() [1/2]

◆ getParam() [2/2]

◆ getPointInTargetAppFrame()

◆ getRenamedParam()

◆ getRestartableData()

◆ getSharedPtr() [1/2]

◆ getSharedPtr() [2/2]

◆ getToMultiApp()

◆ getToName()

◆ getToVarNames()

◆ getTransferVector()

◆ hasFromMultiApp()

◆ hasToMultiApp()

◆ initialSetup()

◆ isParamSetByUser()

◆ isParamValid()

◆ jacobianSetup()

◆ mooseDeprecated()

◆ mooseDocumentedError()

◆ mooseError()

◆ mooseErrorNonPrefixed()

◆ mooseInfo()