This class provides an interface for common operations on field variables of both FE and FV types with all their scalar, vector, eigenvector permutations. More...

#include <MooseVariableFieldBase.h>

Inheritance diagram for MooseVariableFieldBase:

[legend]

Public Types
using	DataFileParameterType = DataFileName
	The parameter type this interface expects for a data file name. More...

Public Member Functions
	MooseVariableFieldBase (const InputParameters &parameters)

virtual void	clearDofIndices ()=0
	Clear out the dof indices. More...

virtual void	prepare ()=0
	Prepare the elemental degrees of freedom. More...

virtual void	prepareNeighbor ()=0
	Prepare the neighbor element degrees of freedom. More...

virtual void	prepareLowerD ()=0
	Prepare a lower dimensional element's degrees of freedom. More...

virtual void	prepareAux ()=0

virtual void	reinitNode ()=0

virtual void	reinitAux ()=0

virtual void	reinitAuxNeighbor ()=0

virtual void	reinitNodes (const std::vector< dof_id_type > &nodes)=0

virtual void	reinitNodesNeighbor (const std::vector< dof_id_type > &nodes)=0

virtual Moose::VarFieldType	fieldType () const =0
	Field type of this variable. More...

const std::string &	componentName (const unsigned int comp) const
	Get the variable name of a component in libMesh. More...

virtual bool	isVector () const =0

virtual bool	isFV () const

virtual bool	isNodalDefined () const =0
	Is this variable defined at nodes. More...

virtual const dof_id_type &	nodalDofIndex () const =0

virtual const dof_id_type &	nodalDofIndexNeighbor () const =0

virtual const Elem *const &	currentElem () const =0
	Current element this variable is evaluated at. More...

const std::set< SubdomainID > &	activeSubdomains () const
	The subdomains the variable is active on. More...

bool	activeOnSubdomain (SubdomainID subdomain) const
	Is the variable active on the subdomain? More...

bool	activeOnSubdomains (const std::set< SubdomainID > &subdomains) const
	Is the variable active on the subdomains? More...

virtual bool	needsGradientVectorStorage () const
	Check if this variable needs a raw vector of gradients at dof-values. More...

virtual void	prepareIC ()=0
	Prepare the initial condition. More...

virtual void	computeFaceValues (const FaceInfo &)
	Compute values at face quadrature points for the element+neighbor (both sides of the face). More...

virtual void	computeElemValues ()=0
	Compute values at interior quadrature points. More...

virtual void	computeElemValuesFace ()=0
	Compute values at facial quadrature points. More...

virtual void	computeNeighborValuesFace ()=0
	Compute values at facial quadrature points for the neighbor. More...

virtual void	computeNeighborValues ()=0
	Compute values at quadrature points for the neighbor. More...

virtual void	computeLowerDValues ()=0
	compute values at quadrature points on the lower dimensional element More...

virtual void	computeNodalNeighborValues ()=0
	Compute nodal values of this variable in the neighbor. More...

virtual void	computeNodalValues ()=0
	Compute nodal values of this variable. More...

virtual const std::vector< dof_id_type > &	dofIndicesNeighbor () const =0
	Get neighbor DOF indices for currently selected element. More...

virtual const std::vector< dof_id_type > &	dofIndicesLower () const =0
	Get dof indices for the current lower dimensional element (this is meaningful when performing mortar FEM) More...

virtual unsigned int	numberOfDofsNeighbor ()=0

virtual void	insert (libMesh::NumericVector< libMesh::Number > &vector)=0
	Insert the currently cached degree of freedom values into the provided `vector`. More...

virtual void	insertLower (libMesh::NumericVector< libMesh::Number > &vector)=0
	Insert the currently cached degree of freedom values for a lower-dimensional element into the provided `vector`. More...

virtual void	add (libMesh::NumericVector< libMesh::Number > &vector)=0
	Add the currently cached degree of freedom values into the provided `vector`. More...

virtual std::size_t	phiSize () const =0
	Return phi size. More...

virtual std::size_t	phiFaceSize () const =0
	Return phiFace size. More...

virtual std::size_t	phiNeighborSize () const =0
	Return phiNeighbor size. More...

virtual std::size_t	phiFaceNeighborSize () const =0
	Return phiFaceNeighbor size. More...

virtual std::size_t	phiLowerSize () const =0
	Return the number of shape functions on the lower dimensional element for this variable. More...

virtual unsigned int	oldestSolutionStateRequested () const =0
	The oldest solution state that is requested for this variable (0 = current, 1 = old, 2 = older, etc). More...

const std::string &	arrayVariableComponent (const unsigned int i) const
	Returns the variable name of a component of an array variable. More...

unsigned int	number () const
	Get variable number coming from libMesh. More...

const libMesh::FEType &	feType () const
	Get the type of finite element object. More...

SystemBase &	sys ()
	Get the system this variable is part of. More...

const SystemBase &	sys () const
	Get the system this variable is part of. More...

bool	useDual () const
	Get dual mortar option. More...

const std::vector< dof_id_type > &	allDofIndices () const
	Get all global dofindices for the variable. More...

unsigned int	totalVarDofs ()

Moose::VarKindType	kind () const
	Kind of the variable (Nonlinear, Auxiliary, ...) More...

void	scalingFactor (const std::vector< Real > &factor)
	Set the scaling factor for this variable. More...

Real	scalingFactor () const
	Get the scaling factor for this variable. More...

const std::vector< Real > &	arrayScalingFactor () const

libMesh::Order	order () const
	Get the order of this variable Note: Order enum can be implicitly converted to unsigned int. More...

unsigned int	count () const
	Get the number of components Note: For standard and vector variables, the number is one. More...

virtual bool	isNodal () const
	Is this variable nodal. More...

virtual bool	hasDoFsOnNodes () const
	Does this variable have DoFs on nodes. More...

virtual libMesh::FEContinuity	getContinuity () const
	Return the continuity of this variable. More...

const libMesh::DofMap &	dofMap () const
	The DofMap associated with the system this variable is in. More...

virtual void	getDofIndices (const Elem *, std::vector< dof_id_type > &) const

virtual const std::vector< dof_id_type > &	dofIndices () const
	Get local DoF indices. More...

std::vector< dof_id_type >	componentDofIndices (const std::vector< dof_id_type > &dof_indices, unsigned int component) const
	Obtain DoF indices of a component with the indices of the 0th component. More...

virtual unsigned int	numberOfDofs () const
	Get the number of local DoFs. More...

bool	eigen () const
	Whether or not this variable operates on an eigen kernel. More...

void	eigen (bool eigen)
	Mark this variable as an eigen var or non-eigen var. More...

void	initialSetup () override
	Gets called at the beginning of the simulation before this object is asked to do its job. More...

virtual void	clearAllDofIndices ()

virtual void	setActiveTags (const std::set< TagID > &vtags)
	Set the active vector tags. More...

virtual bool	isArray () const

bool	isLowerD () const

virtual void	sizeMatrixTagData ()
	Size data structures related to matrix tagging. More...

virtual bool	enabled () const
	Return the enabled status of the object. More...

std::shared_ptr< MooseObject >	getSharedPtr ()
	Get another shared pointer to this object that has the same ownership group. More...

std::shared_ptr< const MooseObject >	getSharedPtr () const

bool	isKokkosObject (IsKokkosObjectKey &&) const
	Get whether this object is a Kokkos functor The parameter is set by the Kokkos base classes: More...

MooseApp &	getMooseApp () const
	Get the MooseApp this class is associated with. More...

const std::string &	type () const
	Get the type of this class. More...

const std::string &	name () const
	Get the name of the class. More...

std::string	typeAndName () const
	Get the class's combined type and name; useful in error handling. More...

MooseObjectParameterName	uniqueParameterName (const std::string &parameter_name) const

MooseObjectName	uniqueName () const

const InputParameters &	parameters () const
	Get the parameters of the object. More...

const hit::Node *	getHitNode () const

bool	hasBase () const

const std::string &	getBase () const

template<typename T >
const T &	getParam (const std::string &name) const
	Retrieve a parameter for the object. More...

template<typename T1 , typename T2 >
std::vector< std::pair< T1, T2 > >	getParam (const std::string &param1, const std::string &param2) const
	Retrieve two parameters and provide pair of parameters for the object. More...

template<typename T >
const T *	queryParam (const std::string &name) const
	Query a parameter for the object. More...

template<typename T >
const T &	getRenamedParam (const std::string &old_name, const std::string &new_name) const
	Retrieve a renamed parameter for the object. More...

template<typename T >
T	getCheckedPointerParam (const std::string &name, const std::string &error_string="") const
	Verifies that the requested parameter exists and is not NULL and returns it to the caller. More...

bool	isParamValid (const std::string &name) const
	Test if the supplied parameter is valid. More...

bool	isParamSetByUser (const std::string &name) const
	Test if the supplied parameter is set by a user, as opposed to not set or set to default. More...

void	connectControllableParams (const std::string &parameter, const std::string &object_type, const std::string &object_name, const std::string &object_parameter) const
	Connect controllable parameter of this action with the controllable parameters of the objects added by this action. More...

template<typename... Args>
void	paramError (const std::string &param, Args... args) const
	Emits an error prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...

template<typename... Args>
void	paramWarning (const std::string &param, Args... args) const
	Emits a warning prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...

template<typename... Args>
void	paramInfo (const std::string &param, Args... args) const
	Emits an informational message prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message. More...

std::string	messagePrefix (const bool hit_prefix=true) const

std::string	errorPrefix (const std::string &) const
	Deprecated message prefix; the error type is no longer used. More...

template<typename... Args>
void	mooseError (Args &&... args) const
	Emits an error prefixed with object name and type and optionally a file path to the top-level block parameter if available. More...

template<typename... Args>
void	mooseDocumentedError (const std::string &repo_name, const unsigned int issue_num, Args &&... args) const

template<typename... Args>
void	mooseErrorNonPrefixed (Args &&... args) const
	Emits an error without the prefixing included in mooseError(). More...

template<typename... Args>
void	mooseWarning (Args &&... args) const
	Emits a warning prefixed with object name and type. More...

template<typename... Args>
void	mooseWarningNonPrefixed (Args &&... args) const
	Emits a warning without the prefixing included in mooseWarning(). More...

template<typename... Args>
void	mooseDeprecated (Args &&... args) const

template<typename... Args>
void	mooseInfo (Args &&... args) const

void	callMooseError (std::string msg, const bool with_prefix, const hit::Node *node=nullptr) const
	External method for calling moose error with added object context. More...

const Parallel::Communicator &	comm () const

processor_id_type	n_processors () const

processor_id_type	processor_id () const

std::string	getDataFileName (const std::string &param) const
	Deprecated method. More...

std::string	getDataFileNameByName (const std::string &relative_path) const
	Deprecated method. More...

std::string	getDataFilePath (const std::string &relative_path) const
	Returns the path of a data file for a given relative file path. More...

const std::vector< SubdomainName > &	blocks () const
	Return the block names for this object. More...

unsigned int	numBlocks () const
	Return the number of blocks for this object. More...

virtual const std::set< SubdomainID > &	blockIDs () const
	Return the block subdomain ids for this object Note, if this is not block restricted, this function returns all mesh subdomain ids. More...

unsigned int	blocksMaxDimension () const
	Return the largest mesh dimension of the elements in the blocks for this object. More...

bool	hasBlocks (const SubdomainName &name) const
	Test if the supplied block name is valid for this object. More...

bool	hasBlocks (const std::vector< SubdomainName > &names) const
	Test if the supplied vector of block names are valid for this object. More...

bool	hasBlocks (const std::set< SubdomainName > &names) const
	Test if the supplied set of block names are valid for this object. More...

bool	hasBlocks (SubdomainID id) const
	Test if the supplied block ids are valid for this object. More...

bool	hasBlocks (const std::vector< SubdomainID > &ids) const
	Test if the supplied vector block ids are valid for this object. More...

bool	hasBlocks (const std::set< SubdomainID > &ids) const
	Test if the supplied set of block ids are valid for this object. More...

bool	isBlockSubset (const std::set< SubdomainID > &ids) const
	Test if the class block ids are a subset of the supplied objects. More...

bool	isBlockSubset (const std::vector< SubdomainID > &ids) const
	Test if the class block ids are a subset of the supplied objects. More...

template<typename T , bool is_ad = false>
bool	hasBlockMaterialProperty (const std::string &prop_name)
	Check if a material property is valid for all blocks of this object. More...

const std::set< SubdomainID > &	meshBlockIDs () const
	Return all of the SubdomainIDs for the mesh. More...

virtual bool	blockRestricted () const
	Returns true if this object has been restricted to a block. More...

virtual void	checkVariable (const MooseVariableFieldBase &variable) const
	Helper for checking that the ids for this object are in agreement with the variables on the supplied variable. More...

void	buildOutputHideVariableList (std::set< std::string > variable_names)
	Builds hide lists for output objects NOT listed in the 'outputs' parameter. More...

const std::set< OutputName > &	getOutputs ()
	Get the list of output objects that this class is restricted. More...

virtual void	timestepSetup ()
	Gets called at the beginning of the timestep before this object is asked to do its job. More...

virtual void	jacobianSetup ()
	Gets called just before the Jacobian is computed and before this object is asked to do its job. More...

virtual void	residualSetup ()
	Gets called just before the residual is computed and before this object is asked to do its job. More...

virtual void	subdomainSetup ()
	Gets called when the subdomain changes (i.e. More...

virtual void	customSetup (const ExecFlagType &)
	Gets called in FEProblemBase::execute() for execute flags other than initial, timestep_begin, nonlinear, linear and subdomain. More...

const ExecFlagEnum &	getExecuteOnEnum () const
	Return the execute on MultiMooseEnum for this object. More...

Static Public Member Functions
static InputParameters	validParams ()

static void	callMooseError (MooseApp const app, const InputParameters &params, std::string msg, const bool with_prefix, const hit::Node node)
	External method for calling moose error with added object context. More...

Public Attributes
const ConsoleStream	_console
	An instance of helper class to write streams to the Console objects. More...

Static Public Attributes
static const std::string	type_param = "_type"
	The name of the parameter that contains the object type. More...

static const std::string	name_param = "_object_name"
	The name of the parameter that contains the object name. More...

static const std::string	unique_name_param = "_unique_name"
	The name of the parameter that contains the unique object name. More...

static const std::string	app_param = "_moose_app"
	The name of the parameter that contains the MooseApp. More...

static const std::string	moose_base_param = "_moose_base"
	The name of the parameter that contains the moose system base. More...

static const std::string	kokkos_object_param = "_kokkos_object"
	The name of the parameter that indicates an object is a Kokkos functor. More...

Protected Member Functions
const libMesh::NumericVector< libMesh::Number > &	getSolution (const Moose::StateArg &state) const
	Get the solution corresponding to the provided state. More...

bool	doDerivatives () const

virtual bool	hasBlockMaterialPropertyHelper (const std::string &prop_name)
	A helper method to allow the Material object to specialize the behavior of hasBlockMaterialProperty. More...

void	initializeBlockRestrictable (const MooseObject *moose_object)
	An initialization routine needed for dual constructors. More...

void	initializeKokkosBlockRestrictable (const Moose::Kokkos::Mesh *mesh)

Moose::CoordinateSystemType	getBlockCoordSystem ()
	Check if the blocks this object operates on all have the same coordinate system, and if so return it. More...

KOKKOS_FUNCTION dof_id_type	numKokkosBlockElements () const
	Get the number of elements this Kokkos object is operating on. More...

KOKKOS_FUNCTION dof_id_type	numKokkosBlockNodes () const
	Get the number of nodes this Kokkos object is operating on. More...

KOKKOS_FUNCTION dof_id_type	numKokkosBlockSides () const
	Get the number of sides this Kokkos object is operating on. More...

KOKKOS_FUNCTION ContiguousElementID	kokkosBlockElementID (ThreadID tid) const
	Get the contiguous element ID this Kokkos thread is operating on. More...

KOKKOS_FUNCTION ContiguousElementID	kokkosBlockNodeID (ThreadID tid) const
	Get the contiguous node index this Kokkos thread is operating on. More...

KOKKOS_FUNCTION auto	kokkosBlockElementSideID (ThreadID tid) const
	Get the contiguous element ID - side index pair this Kokkos thread is operating on. More...

Protected Attributes
SystemBase &	_sys
	System this variable is part of. More...

libMesh::FEType	_fe_type
	The FEType associated with this variable. More...

unsigned int	_var_num
	variable number (from libMesh) More...

unsigned int	_index
	variable number within MOOSE More...

bool	_is_eigen
	Whether or not this variable operates on eigen kernels. More...

Moose::VarKindType	_var_kind
	Variable type (see MooseTypes.h) More...

SubProblem &	_subproblem
	Problem this variable is part of. More...

const libMesh::Variable &	_variable
	libMesh variable object for this variable More...

Assembly &	_assembly
	Assembly data. More...

const libMesh::DofMap &	_dof_map
	DOF map. More...

std::vector< dof_id_type >	_dof_indices
	DOF indices. More...

MooseMesh &	_mesh
	mesh the variable is active in More...

THREAD_ID	_tid
	Thread ID. More...

const unsigned int	_count
	Number of variables in the array. More...

std::vector< Real >	_scaling_factor
	scaling factor for this variable More...

bool	_use_dual
	If dual mortar approach is used. More...

bool	_is_lower_d
	Whether this variable lives on lower dimensional blocks. More...

std::vector< std::string >	_array_var_component_names
	Array variable names when the variable is an array variable. More...

const bool &	_enabled
	Reference to the "enable" InputParameters, used by Controls for toggling on/off MooseObjects. More...

MooseApp &	_app
	The MOOSE application this is associated with. More...

Factory &	_factory
	The Factory associated with the MooseApp. More...

ActionFactory &	_action_factory
	Builds Actions. More...

const std::string &	_type
	The type of this class. More...

const std::string &	_name
	The name of this class. More...

const InputParameters &	_pars
	The object's parameters. More...

const Parallel::Communicator &	_communicator

const MaterialData *	_blk_material_data
	Pointer to the MaterialData class for this object. More...

const ExecFlagEnum &	_execute_enum
	Execute settings for this object. More...

const ExecFlagType &	_current_execute_flag
	Reference to FEProblemBase. More...

Detailed Description

This class provides an interface for common operations on field variables of both FE and FV types with all their scalar, vector, eigenvector permutations.

Definition at line 29 of file MooseVariableFieldBase.h.

Member Typedef Documentation

◆ DataFileParameterType

using DataFileInterface::DataFileParameterType = DataFileName

inherited

The parameter type this interface expects for a data file name.

Definition at line 27 of file DataFileInterface.h.

Constructor & Destructor Documentation

◆ MooseVariableFieldBase()

MooseVariableFieldBase::MooseVariableFieldBase ( const InputParameters & parameters )

Definition at line 21 of file MooseVariableFieldBase.C.

   : MooseVariableBase(parameters)
 {
 }

Member Function Documentation

◆ activeOnSubdomain()

bool MooseVariableFieldBase::activeOnSubdomain ( SubdomainID subdomain ) const

Is the variable active on the subdomain?

Parameters

subdomain The subdomain id in question

Returns: true if active on subdomain, false otherwise

Definition at line 44 of file MooseVariableFieldBase.C.

Referenced by ComputeFullJacobianThread::computeOnBoundary(), ComputeFullJacobianThread::computeOnElement(), ComputeFullJacobianThread::computeOnInternalFace(), FlagElementsThread::onElement(), and ComputeDiracThread::onElement().

 {
   return this->_sys.system().variable(_var_num).active_on_subdomain(subdomain);
 }

◆ activeOnSubdomains()

bool MooseVariableFieldBase::activeOnSubdomains ( const std::set< SubdomainID > & subdomains ) const

Is the variable active on the subdomains?

Parameters

subdomains The subdomain ids in question

Returns: true if active on all provided subdomains, false otherwise

Definition at line 50 of file MooseVariableFieldBase.C.

Referenced by BlockRestrictable::checkVariable(), and ComputeFullJacobianThread::computeOnInternalFace().

 {
   const auto & active_subs = activeSubdomains();
   return std::includes(
       active_subs.begin(), active_subs.end(), subdomains.begin(), subdomains.end());
 }

◆ activeSubdomains()

const std::set< SubdomainID > & MooseVariableFieldBase::activeSubdomains ( ) const

The subdomains the variable is active on.

Definition at line 38 of file MooseVariableFieldBase.C.

Referenced by SetupResidualDebugAction::act(), activeOnSubdomains(), ArrayDGLowerDKernel::ArrayDGLowerDKernel(), ArrayHFEMDirichletBC::ArrayHFEMDirichletBC(), ArrayLowerDIntegratedBC::ArrayLowerDIntegratedBC(), BlockRestrictable::checkVariable(), DGLowerDKernel::DGLowerDKernel(), HFEMDirichletBC::HFEMDirichletBC(), and LowerDIntegratedBC::LowerDIntegratedBC().

 {
   return this->_sys.system().variable(_var_num).active_subdomains();
 }

◆ add()

virtual void MooseVariableFieldBase::add ( libMesh::NumericVector< libMesh::Number > & vector )

pure virtual

Add the currently cached degree of freedom values into the provided vector.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

◆ allDofIndices()

const std::vector< dof_id_type > & MooseVariableBase::allDofIndices ( ) const

inherited

Get all global dofindices for the variable.

Definition at line 197 of file MooseVariableBase.C.

Referenced by FEProblemBase::addJacobianBlockTags(), Assembly::addJacobianNonlocal(), Assembly::cacheJacobianNonlocal(), NonlocalKernel::computeNonlocalJacobian(), NonlocalIntegratedBC::computeNonlocalJacobian(), NonlocalIntegratedBC::computeNonlocalOffDiagJacobian(), NonlocalKernel::computeNonlocalOffDiagJacobian(), Assembly::prepareNonlocal(), Assembly::prepareVariableNonlocal(), and MooseVariableBase::totalVarDofs().

 {
   const auto it = _sys.subproblem()._var_dof_map.find(name());
   if (it != _sys.subproblem()._var_dof_map.end())
     return it->second;
   else
     mooseError("VariableAllDoFMap not prepared for ",
                name(),
                " . Check nonlocal coupling requirement for the variable.");
 }

◆ arrayScalingFactor()

const std::vector<Real>& MooseVariableBase::arrayScalingFactor ( ) const

inlineinherited

Definition at line 102 of file MooseVariableBase.h.

Referenced by Assembly::addJacobianBlock(), Assembly::addJacobianBlockNonlocal(), and Assembly::cacheJacobianBlockNonzero().

102 { return _scaling_factor; }

MooseVariableBase::_scaling_factor

std::vector< Real > _scaling_factor

scaling factor for this variable

Definition: MooseVariableBase.h:253

◆ arrayVariableComponent()

const std::string & MooseVariableBase::arrayVariableComponent ( const unsigned int i ) const

inherited

Returns the variable name of a component of an array variable.

Definition at line 188 of file MooseVariableBase.C.

Referenced by componentName(), AdvancedOutput::initAvailableLists(), and AdvancedOutput::initShowHideLists().

 {
   mooseAssert(
       i < _array_var_component_names.size(),
       "Requested array variable component number is greater than the number of component names.");
   return _array_var_component_names[i];
 }

◆ blockIDs()

const std::set< SubdomainID > & BlockRestrictable::blockIDs ( ) const

virtualinherited

Return the block subdomain ids for this object Note, if this is not block restricted, this function returns all mesh subdomain ids.

Returns: a set of SubdomainIDs that are valid for this object

Definition at line 208 of file BlockRestrictable.C.

Referenced by FunctorMaterial::addFunctorProperty(), DiracKernelBase::addPoint(), DiracKernelBase::addPointWithValidId(), NodalPatchRecoveryAuxBase::blockRestrictElements(), ComboMarker::ComboMarker(), ElementGroupCentroidPositions::ElementGroupCentroidPositions(), ExtraIDIntegralVectorPostprocessor::ExtraIDIntegralVectorPostprocessor(), BlockRestrictable::getBlockCoordSystem(), MaterialBase::getGenericZeroMaterialPropertyByName(), FunctorIC::gradient(), BlockRestrictable::hasBlockMaterialPropertyHelper(), IndicatorMarker::IndicatorMarker(), SubdomainsDivision::initialize(), ElementCentroidPositions::initialize(), QuadraturePointsPositions::initialize(), FunctorExtremaPositions::initialize(), MooseVariableBase::MooseVariableBase(), NodalPatchRecoveryAux::NodalPatchRecoveryAux(), PointwiseRenormalizeVector::PointwiseRenormalizeVector(), ProjectedMaterialPropertyNodalPatchRecoveryAux::ProjectedMaterialPropertyNodalPatchRecoveryAux(), ProjectionAux::ProjectionAux(), MaterialBase::registerPropName(), FVPointValueConstraint::setMyElem(), and FunctorIC::value().

 {
   if (_blk_ids.find(Moose::ANY_BLOCK_ID) != _blk_ids.end())
     return _blk_mesh->meshSubdomains();
   else
     return _blk_ids;
 }

◆ blockRestricted()

bool BlockRestrictable::blockRestricted ( ) const

virtualinherited

Returns true if this object has been restricted to a block.

See also: MooseObject

Definition at line 196 of file BlockRestrictable.C.

Referenced by NodalPatchRecoveryAuxBase::blockRestrictElements(), BlockRestrictable::checkVariable(), SubdomainsDivision::divisionIndex(), ElementGroupCentroidPositions::ElementGroupCentroidPositions(), BlockRestrictable::getBlockCoordSystem(), FunctorIC::gradient(), BlockRestrictable::hasBlockMaterialPropertyHelper(), SubdomainsDivision::initialize(), ElementCentroidPositions::initialize(), QuadraturePointsPositions::initialize(), BlockRestrictable::initializeBlockRestrictable(), SolutionIC::initialSetup(), MooseVariableBase::MooseVariableBase(), FVPointValueConstraint::setMyElem(), and FunctorIC::value().

 {
   return _blk_ids.find(Moose::ANY_BLOCK_ID) == _blk_ids.end();
 }

◆ blocks()

const std::vector< SubdomainName > & BlockRestrictable::blocks ( ) const

inherited

Return the block names for this object.

Note, if the 'blocks' input parameter was not utilized this will return an empty vector.

Returns: vector of SubdomainNames that are valid for this object

Definition at line 202 of file BlockRestrictable.C.

Referenced by MaterialOutputAction::getParams(), SubdomainsDivision::initialize(), and SolutionIC::initialSetup().

 {
   return _blocks;
 }

◆ blocksMaxDimension()

unsigned int BlockRestrictable::blocksMaxDimension ( ) const

inherited

Return the largest mesh dimension of the elements in the blocks for this object.

Definition at line 385 of file BlockRestrictable.C.

 {
   mooseAssert(_blk_dim != libMesh::invalid_uint, "Block restriction not initialized");
   return _blk_dim;
 }

◆ buildOutputHideVariableList()

void OutputInterface::buildOutputHideVariableList ( std::set< std::string > variable_names )

inherited

Builds hide lists for output objects NOT listed in the 'outputs' parameter.

Parameters

variable_names A set of variables for which the 'outputs' parameter controls

By default this is called by the constructor and passes the block name as the list of variables. This needs to be called explicitly if the build_list flag is set to False in the constructor. The latter cases is needed by the Material object to work correctly with the automatic material output capability.

Definition at line 68 of file OutputInterface.C.

Referenced by ReporterTransferInterface::hideVariableHelper(), and OutputInterface::OutputInterface().

 {
   // Set of available names
   const std::set<OutputName> & avail = _oi_output_warehouse.getOutputNames();
 
   // Check for 'none'; hide variables on all outputs
   if (_oi_outputs.find("none") != _oi_outputs.end())
     for (const auto & name : avail)
       _oi_output_warehouse.addInterfaceHideVariables(name, variable_names);
 
   // Check for empty and 'all' in 'outputs' parameter; do not perform any variable restrictions in
   // these cases
   else if (_oi_outputs.empty() || _oi_outputs.find("all") != _oi_outputs.end())
     return;
 
   // Limit the variable output to Output objects listed
   else
   {
     // Create a list of outputs where the variable should be hidden
     std::set<OutputName> hide;
     std::set_difference(avail.begin(),
                         avail.end(),
                         _oi_outputs.begin(),
                         _oi_outputs.end(),
                         std::inserter(hide, hide.begin()));
 
     // If 'outputs' is specified add the object name to the list of items to hide
     for (const auto & name : hide)
       _oi_output_warehouse.addInterfaceHideVariables(name, variable_names);
   }
 }

◆ callMooseError() [1/2]

void MooseBase::callMooseError	(	std::string	msg,
		const bool	with_prefix,
		const hit::Node *	node = `nullptr`
	)		const

inherited

External method for calling moose error with added object context.

Parameters

msg	The message
with_prefix	If true, add the prefix from messagePrefix(), which is the object information (type, name, etc)
node	Optional hit node to add file path context as a prefix

Definition at line 105 of file MooseBase.C.

Referenced by InputParameters::callMooseError(), MooseBase::mooseDocumentedError(), MooseBase::mooseError(), and MooseBase::mooseErrorNonPrefixed().

 {
   callMooseError(&_app, _pars, msg, with_prefix, node);
 }

◆ callMooseError() [2/2]

void MooseBase::callMooseError	(	MooseApp *const	app,
		const InputParameters &	params,
		std::string	msg,
		const bool	with_prefix,
		const hit::Node *	node
	)

staticinherited

External method for calling moose error with added object context.

Needed so that objects without the MooseBase context (InputParameters) can call errors with context

Parameters

app	The app pointer (if available); adds multiapp context and clears the console
params	The parameters, needed to obtain object information
msg	The message
with_prefix	If true, add the prefix from messagePrefix(), which is the object information (type, name, etc)
node	Optional hit node to add file path context as a prefix

Definition at line 113 of file MooseBase.C.

 {
   if (!node)
     node = MooseBase::getHitNode(params);
 
   std::string multiapp_prefix = "";
   if (app)
   {
     if (!app->isUltimateMaster())
       multiapp_prefix = app->name();
     app->getOutputWarehouse().mooseConsole();
   }
 
   if (with_prefix)
     // False here because the hit context will get processed by the node
     msg = messagePrefix(params, false) + msg;
 
   moose::internal::mooseErrorRaw(msg, multiapp_prefix, node);
 }

◆ checkVariable()

void BlockRestrictable::checkVariable ( const MooseVariableFieldBase & variable ) const

virtualinherited

Helper for checking that the ids for this object are in agreement with the variables on the supplied variable.

Parameters

variable The variable to check against.

Reimplemented in DomainUserObject.

Definition at line 357 of file BlockRestrictable.C.

Referenced by DomainUserObject::checkVariable().

 {
   // a variable defined on all internal sides does not need this check because
   // it can be coupled with other variables in DG kernels
   if (!_blk_mesh->interiorLowerDBlocks().empty() &&
       variable.activeOnSubdomains(_blk_mesh->interiorLowerDBlocks()))
     return;
 
   if (!isBlockSubset(variable.activeSubdomains()))
   {
     std::string var_ids = Moose::stringify(variable.activeSubdomains(), ", ");
     std::string obj_ids = Moose::stringify(blockRestricted() ? _blk_ids : meshBlockIDs(), ", ");
     mooseError("The 'block' parameter of the object '",
                _blk_name,
                "' must be a subset of the 'block' parameter of the variable '",
                variable.name(),
                "':\n    Object '",
                _blk_name,
                "': ",
                obj_ids,
                "\n    Variable '",
                variable.name(),
                "': ",
                var_ids);
   }
 }

◆ clearAllDofIndices()

virtual void MooseVariableBase::clearAllDofIndices ( )

inlinevirtualinherited

Reimplemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

Definition at line 175 of file MooseVariableBase.h.

175 { _dof_indices.clear(); }

MooseVariableBase::_dof_indices

std::vector< dof_id_type > _dof_indices

DOF indices.

Definition: MooseVariableBase.h:241

◆ clearDofIndices()

virtual void MooseVariableFieldBase::clearDofIndices ( )

pure virtual

Clear out the dof indices.

We do this in case this variable is not going to be prepared at all...

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ componentDofIndices()

std::vector< dof_id_type > MooseVariableBase::componentDofIndices	(	const std::vector< dof_id_type > &	dof_indices,
		unsigned int	component
	)		const

inherited

Obtain DoF indices of a component with the indices of the 0th component.

Definition at line 215 of file MooseVariableBase.C.

Referenced by Assembly::addJacobianBlock(), and Assembly::cacheJacobianBlockNonzero().

 {
   std::vector<dof_id_type> new_dof_indices(dof_indices);
   if (component != 0)
   {
     if (isNodal())
       for (auto & id : new_dof_indices)
         id += component;
     else
     {
       unsigned int n = dof_indices.size();
       for (auto & id : new_dof_indices)
         id += component * n;
     }
   }
   return new_dof_indices;
 }

◆ componentName()

const std::string & MooseVariableFieldBase::componentName ( const unsigned int comp ) const

Get the variable name of a component in libMesh.

Definition at line 27 of file MooseVariableFieldBase.C.

 {
   if (comp >= _count)
     mooseError("componentName(): Component index is not less than the number of components");
   if (isArray())
     return this->arrayVariableComponent(comp);
   else
     return name();
 }

◆ computeElemValues()

virtual void MooseVariableFieldBase::computeElemValues ( )

pure virtual

◆ computeElemValuesFace()

virtual void MooseVariableFieldBase::computeElemValuesFace ( )

pure virtual

◆ computeFaceValues()

virtual void MooseVariableFieldBase::computeFaceValues ( const FaceInfo & )

inlinevirtual

Compute values at face quadrature points for the element+neighbor (both sides of the face).

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Definition at line 131 of file MooseVariableFieldBase.h.

131 { mooseError("not implemented"); }

MooseBase::mooseError

void mooseError(Args &&... args) const

Emits an error prefixed with object name and type and optionally a file path to the top-level block p...

Definition: MooseBase.h:271

◆ computeLowerDValues()

virtual void MooseVariableFieldBase::computeLowerDValues ( )

pure virtual

compute values at quadrature points on the lower dimensional element

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ computeNeighborValues()

virtual void MooseVariableFieldBase::computeNeighborValues ( )

pure virtual

◆ computeNeighborValuesFace()

virtual void MooseVariableFieldBase::computeNeighborValuesFace ( )

pure virtual

◆ computeNodalNeighborValues()

virtual void MooseVariableFieldBase::computeNodalNeighborValues ( )

pure virtual

Compute nodal values of this variable in the neighbor.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ computeNodalValues()

virtual void MooseVariableFieldBase::computeNodalValues ( )

pure virtual

Compute nodal values of this variable.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ connectControllableParams()

void MooseBase::connectControllableParams	(	const std::string &	parameter,
		const std::string &	object_type,
		const std::string &	object_name,
		const std::string &	object_parameter
	)		const

inherited

Connect controllable parameter of this action with the controllable parameters of the objects added by this action.

Parameters

parameter	Name of the controllable parameter of this action
object_type	Type of the object added by this action.
object_name	Name of the object added by this action.
object_parameter	Name of the parameter of the object.

Definition at line 77 of file MooseBase.C.

 {
   auto & factory = _app.getFactory();
   auto & ip_warehouse = _app.getInputParameterWarehouse();
 
   MooseObjectParameterName primary_name(uniqueName(), parameter);
   const auto base_type = factory.getValidParams(object_type).getBase();
   MooseObjectParameterName secondary_name(base_type, object_name, object_parameter);
   ip_warehouse.addControllableParameterConnection(primary_name, secondary_name);
 
   const auto & tags = _pars.get<std::vector<std::string>>("control_tags");
   for (const auto & tag : tags)
   {
     if (!tag.empty())
     {
       // Only adds the parameter with the different control tags if the derived class
       // properly registers the parameter to its own syntax
       MooseObjectParameterName tagged_name(tag, name(), parameter);
       ip_warehouse.addControllableParameterConnection(
           tagged_name, secondary_name, /*error_on_empty=*/false);
     }
   }
 }

◆ count()

unsigned int MooseVariableBase::count ( ) const

inlineinherited

Get the number of components Note: For standard and vector variables, the number is one.

Definition at line 114 of file MooseVariableBase.h.

Referenced by Assembly::addJacobianBlock(), EigenProblem::adjustEigenVector(), ArrayBodyForce::ArrayBodyForce(), ArrayConstantIC::ArrayConstantIC(), ArrayDGLowerDKernel::ArrayDGLowerDKernel(), ArrayFunctionIC::ArrayFunctionIC(), ArrayHFEMDirichletBC::ArrayHFEMDirichletBC(), ArrayLowerDIntegratedBC::ArrayLowerDIntegratedBC(), ArrayParsedAux::ArrayParsedAux(), ArrayVarReductionAux::ArrayVarReductionAux(), BuildArrayVariableAux::BuildArrayVariableAux(), Assembly::cacheJacobianBlockNonzero(), TagAuxBase< AuxKernel >::checkCoupledVariable(), BuildArrayVariableAux::compute(), ArrayNodalBC::computeJacobian(), ArrayHFEMDirichletBC::computeLowerDQpOffDiagJacobian(), ArrayLowerDIntegratedBC::computeLowerDQpOffDiagJacobian(), ArrayDGLowerDKernel::computeLowerDQpOffDiagJacobian(), ArrayNodalBC::computeOffDiagJacobian(), ArrayTimeDerivative::computeQpJacobian(), ArrayReaction::computeQpJacobian(), ArrayDiffusion::computeQpJacobian(), ArrayCoupledTimeDerivative::computeQpJacobian(), EigenArrayDirichletBC::computeQpJacobian(), ArrayIntegratedBC::computeQpJacobian(), ArrayKernel::computeQpJacobian(), ArrayNodalBC::computeQpJacobian(), ArrayCoupledTimeDerivative::computeQpOffDiagJacobian(), EigenArrayDirichletBC::computeQpOffDiagJacobian(), ArrayIntegratedBC::computeQpOffDiagJacobian(), ArrayKernel::computeQpOffDiagJacobian(), ArrayNodalBC::computeQpOffDiagJacobian(), ArrayDGKernel::computeQpOffDiagJacobian(), Kernel::computeQpOffDiagJacobianArray(), ArrayIntegratedBC::computeQpOffDiagJacobianScalar(), ArrayKernel::computeQpOffDiagJacobianScalar(), ArrayTimeDerivative::computeQpResidual(), ArrayReaction::computeQpResidual(), ArrayCoupledTimeDerivative::computeQpResidual(), FunctionArrayAux::computeValue(), ArrayParsedAux::computeValue(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), FunctionArrayAux::FunctionArrayAux(), ArrayFunctionIC::gradient(), AdvancedOutput::initAvailableLists(), MultiAppVariableValueSamplePostprocessorTransfer::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), ArrayDiffusion::initQpResidual(), AdvancedOutput::initShowHideLists(), Assembly::prepareJacobianBlock(), Assembly::prepareLowerD(), Assembly::prepareNeighbor(), Assembly::prepareNonlocal(), Assembly::prepareVariable(), Assembly::prepareVariableNonlocal(), MultiAppDofCopyTransfer::transfer(), MultiAppDofCopyTransfer::transferDofObject(), and ArrayFunctionIC::value().

114 { return _count; }

MooseVariableBase::_count

const unsigned int _count

Number of variables in the array.

Definition: MooseVariableBase.h:250

◆ currentElem()

virtual const Elem* const& MooseVariableFieldBase::currentElem ( ) const

pure virtual

Current element this variable is evaluated at.

Implemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

◆ customSetup()

virtual void SetupInterface::customSetup ( const ExecFlagType & )

inlinevirtualinherited

Gets called in FEProblemBase::execute() for execute flags other than initial, timestep_begin, nonlinear, linear and subdomain.

Reimplemented in Function.

Definition at line 69 of file SetupInterface.h.

69 {}

◆ doDerivatives()

bool MooseVariableBase::doDerivatives ( ) const

protectedinherited

Returns: whether we should insert derivatives

◆ dofIndices()

virtual const std::vector<dof_id_type>& MooseVariableBase::dofIndices ( ) const

inlinevirtualinherited

Get local DoF indices.

Reimplemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

Definition at line 150 of file MooseVariableBase.h.

Referenced by Assembly::addJacobianCoupledVarPair(), Assembly::addJacobianLowerD(), Assembly::addJacobianNeighbor(), Assembly::addJacobianNeighborLowerD(), Assembly::addJacobianNonlocal(), Assembly::cacheJacobianCoupledVarPair(), Assembly::cacheJacobianMortar(), Assembly::cacheJacobianNeighbor(), Assembly::cacheJacobianNonlocal(), AuxScalarKernel::compute(), ADScalarKernel::computeADJacobian(), FVScalarLagrangeMultiplierInterface::computeJacobian(), FVBoundaryScalarLagrangeMultiplierConstraint::computeJacobian(), ADMortarConstraint::computeJacobian(), MortarConstraint::computeJacobian(), ADKernelScalarBase::computeJacobian(), ADMortarScalarBase::computeJacobian(), NonlocalIntegratedBC::computeNonlocalOffDiagJacobian(), NonlocalKernel::computeNonlocalOffDiagJacobian(), FVScalarLagrangeMultiplierConstraint::computeOffDiagJacobian(), MortarScalarBase::computeOffDiagJacobianScalar(), ADPeriodicSegmentalConstraint::computeQpResidual(), ADPenaltyPeriodicSegmentalConstraint::computeQpResidual(), FVScalarLagrangeMultiplierInterface::computeResidual(), FVScalarLagrangeMultiplierConstraint::computeResidual(), FVBoundaryScalarLagrangeMultiplierConstraint::computeResidual(), ADKernelScalarBase::computeResidual(), ADMortarScalarBase::computeResidual(), MortarScalarBase::computeResidual(), FVScalarLagrangeMultiplierConstraint::computeResidualAndJacobian(), ADKernelScalarBase::computeResidualAndJacobian(), MortarScalarBase::computeScalarJacobian(), KernelScalarBase::computeScalarJacobian(), MortarScalarBase::computeScalarOffDiagJacobian(), KernelScalarBase::computeScalarOffDiagJacobian(), KernelScalarBase::computeScalarOffDiagJacobianScalar(), MortarScalarBase::computeScalarOffDiagJacobianScalar(), ADPenaltyPeriodicSegmentalConstraint::computeScalarQpResidual(), KernelScalarBase::computeScalarResidual(), NodalExtremeValue::execute(), ScalarVariable::execute(), MultiAppPostprocessorToAuxScalarTransfer::execute(), MultiAppScalarToAuxScalarTransfer::execute(), DiscreteVariableResidualNorm::execute(), TableOutput::outputScalarVariables(), Exodus::outputScalarVariables(), Assembly::prepareJacobianBlock(), Assembly::prepareLowerD(), Assembly::prepareNeighbor(), Assembly::prepareNonlocal(), Assembly::prepareVariable(), Assembly::prepareVariableNonlocal(), FEProblemBase::projectInitialConditionOnCustomRange(), and FEProblemBase::projectSolution().

150 { return _dof_indices; }

MooseVariableBase::_dof_indices

std::vector< dof_id_type > _dof_indices

DOF indices.

Definition: MooseVariableBase.h:241

◆ dofIndicesLower()

virtual const std::vector<dof_id_type>& MooseVariableFieldBase::dofIndicesLower ( ) const

pure virtual

Get dof indices for the current lower dimensional element (this is meaningful when performing mortar FEM)

Returns: the lower dimensional element's dofs

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

Referenced by MortarConstraint::computeJacobian(), MortarScalarBase::computeScalarOffDiagJacobian(), and Assembly::prepareLowerD().

◆ dofIndicesNeighbor()

virtual const std::vector<dof_id_type>& MooseVariableFieldBase::dofIndicesNeighbor ( ) const

pure virtual

Get neighbor DOF indices for currently selected element.

Returns: the neighbor degree of freedom indices

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

Referenced by ADMortarConstraint::computeJacobian(), MortarConstraint::computeJacobian(), NodeFaceConstraint::computeOffDiagJacobian(), MortarScalarBase::computeOffDiagJacobianScalar(), MortarScalarBase::computeScalarOffDiagJacobian(), Assembly::prepareLowerD(), and Assembly::prepareNeighbor().

◆ dofMap()

const libMesh::DofMap& MooseVariableBase::dofMap ( ) const

inlineinherited

The DofMap associated with the system this variable is in.

Definition at line 139 of file MooseVariableBase.h.

Referenced by AuxScalarKernel::compute(), ScalarVariable::execute(), and DiscreteVariableResidualNorm::execute().

139 { return _dof_map; }

MooseVariableBase::_dof_map

const libMesh::DofMap & _dof_map

DOF map.

Definition: MooseVariableBase.h:238

◆ eigen() [1/2]

bool MooseVariableBase::eigen ( ) const

inlineinherited

Whether or not this variable operates on an eigen kernel.

Definition at line 166 of file MooseVariableBase.h.

Referenced by EigenProblem::adjustEigenVector().

166 { return _is_eigen; }

MooseVariableBase::_is_eigen

bool _is_eigen

Whether or not this variable operates on eigen kernels.

Definition: MooseVariableBase.h:223

◆ eigen() [2/2]

void MooseVariableBase::eigen ( bool eigen )

inlineinherited

Mark this variable as an eigen var or non-eigen var.

Definition at line 171 of file MooseVariableBase.h.

Referenced by MooseVariableBase::eigen().

171 { _is_eigen = eigen; }

MooseVariableBase::eigen

bool eigen() const

Whether or not this variable operates on an eigen kernel.

Definition: MooseVariableBase.h:166

MooseVariableBase::_is_eigen

bool _is_eigen

Whether or not this variable operates on eigen kernels.

Definition: MooseVariableBase.h:223

◆ enabled()

virtual bool MooseObject::enabled ( ) const

inlinevirtualinherited

Return the enabled status of the object.

Reimplemented in EigenKernel.

Definition at line 46 of file MooseObject.h.

Referenced by EigenKernel::enabled().

46 { return _enabled; }

MooseObject::_enabled

const bool & _enabled

Reference to the "enable" InputParameters, used by Controls for toggling on/off MooseObjects.

Definition: MooseObject.h:80

◆ errorPrefix()

std::string MooseBase::errorPrefix ( const std::string & ) const

inlineinherited

Deprecated message prefix; the error type is no longer used.

Definition at line 264 of file MooseBase.h.

264 { return messagePrefix(); }

MooseBase::messagePrefix

std::string messagePrefix(const bool hit_prefix=true) const

Definition: MooseBase.h:256

◆ feType()

const libMesh::FEType& MooseVariableBase::feType ( ) const

inlineinherited

Get the type of finite element object.

Definition at line 65 of file MooseVariableBase.h.

Referenced by SetupResidualDebugAction::act(), ADDGKernel::ADDGKernel(), Assembly::adGradPhi(), ADIntegratedBCTempl< T >::ADIntegratedBCTempl(), ADKernelTempl< T >::ADKernelTempl(), ArrayDGKernel::ArrayDGKernel(), ArrayIntegratedBC::ArrayIntegratedBC(), ArrayKernel::ArrayKernel(), AuxKernelTempl< Real >::AuxKernelTempl(), BoundsBase::BoundsBase(), BuildArrayVariableAux::BuildArrayVariableAux(), TagAuxBase< AuxKernel >::checkCoupledVariable(), SamplerBase::checkForStandardFieldVariableType(), GapValueAux::computeValue(), CopyValueAux::CopyValueAux(), DGKernel::DGKernel(), MultiAppNearestNodeTransfer::execute(), moose::internal::incompatVarMsg(), AdvancedOutput::initAvailableLists(), MultiAppProjectionTransfer::initialSetup(), AdvancedOutput::initShowHideLists(), IntegratedBC::IntegratedBC(), InterfaceKernelTempl< T >::InterfaceKernelTempl(), InternalSideIndicatorBase::InternalSideIndicatorBase(), Kernel::Kernel(), MeshDivisionAux::MeshDivisionAux(), MultiAppVariableValueSamplePostprocessorTransfer::MultiAppVariableValueSamplePostprocessorTransfer(), NodalBC::NodalBC(), NodalKernel::NodalKernel(), SolutionUserObjectBase::pointValueWrapper(), PointwiseRenormalizeVector::PointwiseRenormalizeVector(), MultiAppDofCopyTransfer::transfer(), and VectorNodalBC::VectorNodalBC().

65 { return _fe_type; }

MooseVariableBase::_fe_type

libMesh::FEType _fe_type

The FEType associated with this variable.

Definition: MooseVariableBase.h:214

◆ fieldType()

virtual Moose::VarFieldType MooseVariableFieldBase::fieldType ( ) const

pure virtual

Field type of this variable.

Implemented in MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, and MooseVariableField< Real >.

Referenced by ArrayDGKernel::computeOffDiagElemNeighJacobian(), DGLowerDKernel::computeOffDiagLowerDJacobian(), ArrayDGLowerDKernel::computeOffDiagLowerDJacobian(), SubProblem::getVariableHelper(), and MultiAppDofCopyTransfer::transfer().

◆ getBase()

const std::string& MooseBase::getBase ( ) const

inlineinherited

Returns: The registered base for this object (set via InputParameters::registerBase())

Definition at line 147 of file MooseBase.h.

Referenced by Factory::copyConstruct(), and MooseBase::uniqueParameterName().

147 { return _pars.getBase(); }

MooseBase::_pars

const InputParameters & _pars

The object's parameters.

Definition: MooseBase.h:366

InputParameters::getBase

const std::string & getBase() const

Definition: InputParameters.C:497

◆ getBlockCoordSystem()

Moose::CoordinateSystemType BlockRestrictable::getBlockCoordSystem ( )

protectedinherited

Check if the blocks this object operates on all have the same coordinate system, and if so return it.

Definition at line 335 of file BlockRestrictable.C.

 {
   if (!_blk_mesh)
     mooseError("No mesh available in BlockRestrictable::checkCoordSystem()");
   if (!_blk_feproblem)
     mooseError("No problem available in BlockRestrictable::checkCoordSystem()");
 
   const auto & subdomains = blockRestricted() ? blockIDs() : meshBlockIDs();
 
   if (subdomains.empty())
     mooseError("No subdomains found in the problem.");
 
   // make sure all subdomains are using the same coordinate system
   auto coord_system = _blk_feproblem->getCoordSystem(*subdomains.begin());
   for (auto subdomain : subdomains)
     if (_blk_feproblem->getCoordSystem(subdomain) != coord_system)
       mooseError("This object requires all subdomains to have the same coordinate system.");
 
   return coord_system;
 }

◆ getCheckedPointerParam()

template<typename T >

T MooseBase::getCheckedPointerParam	(	const std::string &	name,
		const std::string &	error_string = `""`
	)		const

inherited

Verifies that the requested parameter exists and is not NULL and returns it to the caller.

The template parameter must be a pointer or an error will be thrown.

Definition at line 432 of file MooseBase.h.

 {
   return _pars.getCheckedPointerParam<T>(name, error_string);
 }

◆ getContinuity()

virtual libMesh::FEContinuity MooseVariableBase::getContinuity ( ) const

inlinevirtualinherited

Return the continuity of this variable.

Reimplemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

Definition at line 131 of file MooseVariableBase.h.

Referenced by ProjectionAux::computeValue(), and MultiAppGeneralFieldNearestLocationTransfer::initialSetup().

   {
     mooseError("Base class cannot determine this");
   };

◆ getDataFileName()

std::string DataFileInterface::getDataFileName ( const std::string & param ) const

inherited

Deprecated method.

The data file paths are now automatically set within the InputParameters object, so using getParam<DataFileName>("param_name") is now sufficient.

Definition at line 21 of file DataFileInterface.C.

 {
   _parent.mooseDeprecated("getDataFileName() is deprecated. The file path is now directly set "
                           "within the InputParameters.\nUse getParam<DataFileName>(\"",
                           param,
                           "\") instead.");
   return _parent.getParam<DataFileName>(param);
 }

◆ getDataFileNameByName()

std::string DataFileInterface::getDataFileNameByName ( const std::string & relative_path ) const

inherited

Deprecated method.

Use getDataFilePath() instead.

Definition at line 31 of file DataFileInterface.C.

 {
   _parent.mooseDeprecated("getDataFileNameByName() is deprecated. Use getDataFilePath(\"",
                           relative_path,
                           "\") instead.");
   return getDataFilePath(relative_path);
 }

◆ getDataFilePath()

std::string DataFileInterface::getDataFilePath ( const std::string & relative_path ) const

inherited

Returns the path of a data file for a given relative file path.

This can be used for hardcoded datafile names and will search the same locations as getDataFileName

Definition at line 40 of file DataFileInterface.C.

Referenced by DataFileInterface::getDataFileNameByName().

 {
   // This should only ever be used with relative paths. There is no point to
   // use this search path with an absolute path.
   if (std::filesystem::path(relative_path).is_absolute())
     _parent.mooseWarning("While using getDataFilePath(\"",
                          relative_path,
                          "\"): This API should not be used for absolute paths.");
 
   // This will search the data paths for this relative path
   std::optional<std::string> error;
   Moose::DataFileUtils::Path found_path;
   {
     // Throw on error so that if getPath() fails, we can throw an error
     // with the context of _parent.mooseError()
     Moose::ScopedThrowOnError scoped_throw_on_error;
 
     try
     {
       found_path = Moose::DataFileUtils::getPath(relative_path);
     }
     catch (std::exception & e)
     {
       error = e.what();
     }
   }
 
   if (error)
     _parent.mooseError(*error);
 
   mooseAssert(found_path.context == Moose::DataFileUtils::Context::DATA,
               "Should only ever obtain data");
   mooseAssert(found_path.data_name, "Should be set");
 
   const std::string msg =
       "Using data file '" + found_path.path + "' from " + *found_path.data_name + " data";
   _parent.mooseInfo(msg);
 
   return found_path.path;
 }

◆ getDofIndices()

virtual void MooseVariableBase::getDofIndices	(	const Elem *	,
		std::vector< dof_id_type > &
	)		const

inlinevirtualinherited

Reimplemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

Definition at line 141 of file MooseVariableBase.h.

Referenced by MultiAppVariableValueSamplePostprocessorTransfer::execute(), NodeElemConstraint::getConnectedDofIndices(), and NodeFaceConstraint::getConnectedDofIndices().

   {
     mooseError("not implemented");
   };

◆ getExecuteOnEnum()

const ExecFlagEnum & SetupInterface::getExecuteOnEnum ( ) const

inherited

Return the execute on MultiMooseEnum for this object.

Definition at line 73 of file SetupInterface.C.

Referenced by MultiAppTransfer::checkMultiAppExecuteOn(), EigenProblem::checkProblemIntegrity(), Control::Control(), EigenExecutionerBase::init(), MultiAppConservativeTransfer::initialSetup(), IntegralPreservingFunctionIC::initialSetup(), Terminator::initialSetup(), Exodus::outputSetup(), NodalReporter::shouldStore(), ElementReporter::shouldStore(), and GeneralReporter::shouldStore().

 {
   return _execute_enum;
 }

◆ getHitNode()

const hit::Node* MooseBase::getHitNode ( ) const

inlineinherited

Returns: The block-level hit node for this object, if any

Definition at line 136 of file MooseBase.h.

Referenced by FEProblemBase::addAnyRedistributers(), MooseBase::callMooseError(), MooseBase::getHitNode(), and MooseBase::messagePrefix().

136 { return getHitNode(_pars); }

MooseBase::_pars

const InputParameters & _pars

The object's parameters.

Definition: MooseBase.h:366

MooseBase::getHitNode

const hit::Node * getHitNode() const

Definition: MooseBase.h:136

◆ getMooseApp()

MooseApp& MooseBase::getMooseApp ( ) const

inlineinherited

Get the MooseApp this class is associated with.

Definition at line 87 of file MooseBase.h.

Referenced by ChainControlSetupAction::act(), AddDefaultConvergenceAction::addDefaultMultiAppFixedPointConvergence(), AddDefaultConvergenceAction::addDefaultNonlinearConvergence(), AddDefaultConvergenceAction::addDefaultSteadyStateConvergence(), FEProblemBase::advanceState(), ParsedChainControl::buildFunction(), ReporterTransferInterface::checkHasReporterValue(), AddDefaultConvergenceAction::checkUnusedMultiAppFixedPointConvergenceParameters(), AddDefaultConvergenceAction::checkUnusedNonlinearConvergenceParameters(), AddDefaultConvergenceAction::checkUnusedSteadyStateConvergenceParameters(), Coupleable::checkWritableVar(), ComponentPhysicsInterface::ComponentPhysicsInterface(), Coupleable::Coupleable(), MortarData::createMortarInterface(), EigenProblem::doFreeNonlinearPowerIterations(), Terminator::execute(), FEProblemSolve::FEProblemSolve(), SolutionInvalidInterface::flagInvalidSolutionInternal(), ChainControl::getChainControlDataSystem(), DefaultConvergenceBase::getSharedExecutionerParam(), ChainControlDataPostprocessor::initialSetup(), MooseVariableDataFV< OutputType >::MooseVariableDataFV(), ProgressOutput::output(), PetscOutputInterface::petscLinearOutput(), PetscOutputInterface::petscNonlinearOutput(), PetscOutputInterface::PetscOutputInterface(), PostprocessorInterface::postprocessorsAdded(), MultiApp::preTransfer(), Reporter::Reporter(), ReporterInterface::reportersAdded(), MultiApp::restore(), and VectorPostprocessorInterface::vectorPostprocessorsAdded().

87 { return _app; }

MooseBase::_app

MooseApp & _app

The MOOSE application this is associated with.

Definition: MooseBase.h:357

◆ getOutputs()

const std::set< OutputName > & OutputInterface::getOutputs ( )

inherited

Get the list of output objects that this class is restricted.

Returns: A set of OutputNames

Definition at line 101 of file OutputInterface.C.

 {
   return _oi_outputs;
 }

◆ getParam() [1/2]

template<typename T >

const T & MooseBase::getParam ( const std::string & name ) const

inherited

Retrieve a parameter for the object.

Parameters

name	The name of the parameter

Returns: The value of the parameter

Definition at line 388 of file MooseBase.h.

 {
   return InputParameters::getParamHelper<T>(name, _pars);
 }

◆ getParam() [2/2]

template<typename T1 , typename T2 >

std::vector< std::pair< T1, T2 > > MooseBase::getParam	(	const std::string &	param1,
		const std::string &	param2
	)		const

inherited

Retrieve two parameters and provide pair of parameters for the object.

Parameters

param1	The name of first parameter
param2	The name of second parameter

Returns: Vector of pairs of first and second parameters

Definition at line 425 of file MooseBase.h.

 {
   return _pars.get<T1, T2>(param1, param2);
 }

◆ getRenamedParam()

template<typename T >

const T & MooseBase::getRenamedParam	(	const std::string &	old_name,
		const std::string &	new_name
	)		const

inherited

Retrieve a renamed parameter for the object.

This helper makes sure we check both names before erroring, and that only one parameter is passed to avoid silent errors

Parameters

old_name	the old name for the parameter
new_name	the new name for the parameter

Definition at line 402 of file MooseBase.h.

 {
   // Most important: accept new parameter
   if (isParamSetByUser(new_name) && !isParamValid(old_name))
     return getParam<T>(new_name);
   // Second most: accept old parameter
   if (isParamValid(old_name) && !isParamSetByUser(new_name))
     return getParam<T>(old_name);
   // Third most: accept default for new parameter
   if (isParamValid(new_name) && !isParamValid(old_name))
     return getParam<T>(new_name);
   // Refuse: no default, no value passed
   if (!isParamValid(old_name) && !isParamValid(new_name))
     mooseError("parameter '" + new_name +
                "' is being retrieved without being set.\nDid you misspell it?");
   // Refuse: both old and new parameters set by user
   else
     mooseError("Parameter '" + new_name + "' may not be provided alongside former parameter '" +
                old_name + "'");
 }

◆ getSharedPtr() [1/2]

std::shared_ptr< MooseObject > MooseObject::getSharedPtr ( )

inherited

Get another shared pointer to this object that has the same ownership group.

Wrapper around shared_from_this().

Definition at line 68 of file MooseObject.C.

Referenced by MFEMProblem::addBoundaryCondition(), MFEMProblem::addKernel(), and MFEMProblem::addMFEMSolver().

 {
   try
   {
     return shared_from_this();
   }
   catch (std::bad_weak_ptr &)
   {
     mooseError(not_shared_error);
   }
 }

◆ getSharedPtr() [2/2]

std::shared_ptr< const MooseObject > MooseObject::getSharedPtr ( ) const

inherited

Definition at line 81 of file MooseObject.C.

 {
   try
   {
     return shared_from_this();
   }
   catch (std::bad_weak_ptr &)
   {
     mooseError(not_shared_error);
   }
 }

◆ getSolution()

const NumericVector< Number > & MooseVariableBase::getSolution ( const Moose::StateArg & state ) const

protectedinherited

Get the solution corresponding to the provided state.

Definition at line 258 of file MooseVariableBase.C.

Referenced by MooseVariableScalar::evaluate().

 {
   // It's not safe to use solutionState(0) because it returns the libMesh System solution member
   // which is wrong during things like finite difference Jacobian evaluation, e.g. when PETSc
   // perturbs the solution vector we feed these perturbations into the current_local_solution
   // while the libMesh solution is frozen in the non-perturbed state
   return (state.state == 0) ? *this->_sys.currentSolution()
                             : this->_sys.solutionState(state.state, state.iteration_type);
 }

◆ hasBase()

bool MooseBase::hasBase ( ) const

inlineinherited

Returns: Whether or not this object has a registered base (set via InputParameters::registerBase())

Definition at line 142 of file MooseBase.h.

142 { return _pars.hasBase(); }

MooseBase::_pars

const InputParameters & _pars

The object's parameters.

Definition: MooseBase.h:366

InputParameters::hasBase

bool hasBase() const

Definition: InputParameters.C:491

◆ hasBlockMaterialProperty()

template<typename T , bool is_ad>

bool BlockRestrictable::hasBlockMaterialProperty ( const std::string & prop_name )

inherited

Check if a material property is valid for all blocks of this object.

This method returns true if the supplied property name has been declared in a Material object on the block ids for this object.

Template Parameters

T	The type of material property

Parameters

prop_name the name of the property to query

Returns: true if the property exists for all block ids of the object, otherwise false

See also: Material::hasBlockMaterialProperty

Definition at line 360 of file BlockRestrictable.h.

 {
   mooseAssert(_blk_material_data != NULL, "MaterialData pointer is not defined");
   return hasBlockMaterialPropertyHelper(prop_name) &&
          _blk_material_data->haveGenericProperty<T, is_ad>(prop_name);
 }

◆ hasBlockMaterialPropertyHelper()

bool BlockRestrictable::hasBlockMaterialPropertyHelper ( const std::string & prop_name )

protectedvirtualinherited

A helper method to allow the Material object to specialize the behavior of hasBlockMaterialProperty.

It also avoid circular #include problems.

See also: hasBlockMaterialProperty

Definition at line 299 of file BlockRestrictable.C.

Referenced by BlockRestrictable::hasBlockMaterialProperty().

 {
 
   // Reference to MaterialWarehouse for testing and retrieving block ids
   const MaterialWarehouse & warehouse = _blk_feproblem->getMaterialWarehouse();
 
   // Complete set of ids that this object is active
   const std::set<SubdomainID> & ids = blockRestricted() ? blockIDs() : meshBlockIDs();
 
   // Loop over each id for this object
   for (const auto & id : ids)
   {
     // Storage of material properties that have been DECLARED on this id
     std::set<std::string> declared_props;
 
     // If block materials exist, populated the set of properties that were declared
     if (warehouse.hasActiveBlockObjects(id))
     {
       const std::vector<std::shared_ptr<MaterialBase>> & mats = warehouse.getActiveBlockObjects(id);
       for (const auto & mat : mats)
       {
         const std::set<std::string> & mat_props = mat->getSuppliedItems();
         declared_props.insert(mat_props.begin(), mat_props.end());
       }
     }
 
     // If the supplied property is not in the list of properties on the current id, return false
     if (declared_props.find(prop_name) == declared_props.end())
       return false;
   }
 
   // If you get here the supplied property is defined on all blocks
   return true;
 }

◆ hasBlocks() [1/6]

bool BlockRestrictable::hasBlocks ( const SubdomainName & name ) const

inherited

Test if the supplied block name is valid for this object.

Parameters

name	A SubdomainName to check

Returns: True if the given id is valid for this object

Definition at line 223 of file BlockRestrictable.C.

Referenced by LinearFVFluxKernel::addMatrixContribution(), DiracKernelBase::addPoint(), LinearFVFluxKernel::addRightHandSideContribution(), NodalPatchRecoveryBase::addToQuery(), MultiAppVariableValueSamplePostprocessorTransfer::cacheElemToPostprocessorData(), DomainUserObject::checkVariable(), ComputeJacobianThread::compute(), ComboMarker::computeElementMarker(), GradientJumpIndicator::computeQpIntegral(), ProjectionAux::computeValue(), DomainUserObject::DomainUserObject(), ProjectionAux::elemOnNodeVariableIsDefinedOn(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), QuadraturePointMultiApp::fillPositions(), CentroidMultiApp::fillPositions(), NodalPatchRecoveryBase::gatherRequestList(), NodalPatchRecoveryBase::getCoefficients(), MeshDivisionFunctorReductionVectorPostprocessor::hasBlocks(), BlockRestrictable::hasBlocks(), MooseVariableField< Real >::hasBlocks(), FVFluxKernel::hasFaceSide(), IndicatorMarker::IndicatorMarker(), NodePositions::initialize(), ParsedDownSelectionPositions::initialize(), UpdateErrorVectorsThread::onElement(), PointwiseRenormalizeVector::PointwiseRenormalizeVector(), and BlockRestrictionDebugOutput::printBlockRestrictionMap().

 {
   // Create a vector and utilize the getSubdomainIDs function, which
   // handles the ANY_BLOCK_ID (getSubdomainID does not)
   std::vector<SubdomainName> names(1);
   names[0] = name;
   return hasBlocks(_blk_mesh->getSubdomainIDs(names));
 }

◆ hasBlocks() [2/6]

bool BlockRestrictable::hasBlocks ( const std::vector< SubdomainName > & names ) const

inherited

Test if the supplied vector of block names are valid for this object.

Parameters

names A vector of SubdomainNames to check

Returns: True if the given ids are valid for this object

Definition at line 233 of file BlockRestrictable.C.

 {
   return hasBlocks(_blk_mesh->getSubdomainIDs(names));
 }

◆ hasBlocks() [3/6]

bool BlockRestrictable::hasBlocks ( const std::set< SubdomainName > & names ) const

inherited

Test if the supplied set of block names are valid for this object.

Parameters

names A set of SubdomainNames to check

Returns: True if the given ids are valid for this object

Definition at line 239 of file BlockRestrictable.C.

 {
   return hasBlocks(_blk_mesh->getSubdomainIDs(names));
 }

◆ hasBlocks() [4/6]

bool BlockRestrictable::hasBlocks ( SubdomainID id ) const

inherited

Test if the supplied block ids are valid for this object.

Parameters

id	A SubdomainID to check

Returns: True if the given id is valid for this object

Definition at line 245 of file BlockRestrictable.C.

 {
   if (_blk_ids.empty() || _blk_ids.find(Moose::ANY_BLOCK_ID) != _blk_ids.end())
     return true;
   else
     return _blk_ids.find(id) != _blk_ids.end();
 }

◆ hasBlocks() [5/6]

bool BlockRestrictable::hasBlocks ( const std::vector< SubdomainID > & ids ) const

inherited

Test if the supplied vector block ids are valid for this object.

Parameters

ids	A vector of SubdomainIDs ids to check

Returns: True if all of the given ids are found within the ids for this object

Definition at line 254 of file BlockRestrictable.C.

 {
   std::set<SubdomainID> ids_set(ids.begin(), ids.end());
   return hasBlocks(ids_set);
 }

◆ hasBlocks() [6/6]

bool BlockRestrictable::hasBlocks ( const std::set< SubdomainID > & ids ) const

inherited

Test if the supplied set of block ids are valid for this object.

Parameters

ids	A std::set of SubdomainIDs to check

Returns: True if all of the given ids are found within the ids for this object

See also: isSubset

Definition at line 261 of file BlockRestrictable.C.

 {
   if (_blk_ids.empty() || _blk_ids.find(Moose::ANY_BLOCK_ID) != _blk_ids.end())
     return true;
   else
     return std::includes(_blk_ids.begin(), _blk_ids.end(), ids.begin(), ids.end());
 }

◆ hasDoFsOnNodes()

virtual bool MooseVariableBase::hasDoFsOnNodes ( ) const

inlinevirtualinherited

Does this variable have DoFs on nodes.

Returns: true if it does, false if not.

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Definition at line 126 of file MooseVariableBase.h.

126 { mooseError("Base class cannot determine this"); };

MooseBase::mooseError

void mooseError(Args &&... args) const

Emits an error prefixed with object name and type and optionally a file path to the top-level block p...

Definition: MooseBase.h:271

◆ initializeBlockRestrictable()

void BlockRestrictable::initializeBlockRestrictable ( const MooseObject * moose_object )

protectedinherited

An initialization routine needed for dual constructors.

Definition at line 76 of file BlockRestrictable.C.

Referenced by BlockRestrictable::BlockRestrictable().

 {
   // If the mesh pointer is not defined, but FEProblemBase is, get it from there
   if (_blk_feproblem != NULL && _blk_mesh == NULL)
     _blk_mesh = &_blk_feproblem->mesh();
 
   // Check that the mesh pointer was defined, it is required for this class to operate
   if (_blk_mesh == NULL)
     mooseError("The input parameters must contain a pointer to FEProblem via '_fe_problem' or a "
                "pointer to the MooseMesh via '_mesh'");
 
   // Populate the MaterialData pointer
   if (_blk_feproblem != NULL)
   {
 #ifdef MOOSE_KOKKOS_ENABLED
     if (_moose_object->isKokkosObject({}))
       _blk_material_data = &_blk_feproblem->getKokkosMaterialData(Moose::BLOCK_MATERIAL_DATA);
     else
 #endif
       _blk_material_data = &_blk_feproblem->getMaterialData(Moose::BLOCK_MATERIAL_DATA, _blk_tid);
   }
 
   // The 'block' input is defined
   if (moose_object->isParamValid("block"))
   {
     // Extract the blocks from the input
     _blocks = moose_object->getParam<std::vector<SubdomainName>>("block");
 
     // Store the IDs in a set, handling ANY_BLOCK_ID if supplied
     if (std::find(_blocks.begin(), _blocks.end(), "ANY_BLOCK_ID") != _blocks.end())
       _blk_ids.insert(Moose::ANY_BLOCK_ID);
     else
     {
       // Get the IDs from the supplied names
       _vec_ids = _blk_mesh->getSubdomainIDs(_blocks);
       _blk_ids.insert(_vec_ids.begin(), _vec_ids.end());
     }
   }
 
   // When 'blocks' is not set and there is a "variable", use the blocks from the variable
   else if (moose_object->isParamValid("variable"))
   {
     std::string variable_name = moose_object->parameters().getMooseType("variable");
     if (!variable_name.empty())
       _blk_ids = _blk_feproblem
                      ->getVariable(_blk_tid,
                                    variable_name,
                                    Moose::VarKindType::VAR_ANY,
                                    Moose::VarFieldType::VAR_FIELD_ANY)
                      .activeSubdomains();
   }
 
   // Produce error if the object is not allowed to be both block and boundary restricted
   if (!_blk_dual_restrictable && !_boundary_ids.empty() && !_boundary_ids.empty())
     if (!_boundary_ids.empty() && _boundary_ids.find(Moose::ANY_BOUNDARY_ID) == _boundary_ids.end())
       moose_object->paramError("block",
                                "Attempted to restrict the object '",
                                _blk_name,
                                "' to a block, but the object is already restricted by boundary");
 
   // If no blocks were defined above, specify that it is valid on all blocks
   if (_blk_ids.empty() && !moose_object->isParamValid("boundary"))
   {
     _blk_ids.insert(Moose::ANY_BLOCK_ID);
     _blocks = {"ANY_BLOCK_ID"};
   }
 
   // If this object is block restricted, check that defined blocks exist on the mesh
   if (_blk_ids.find(Moose::ANY_BLOCK_ID) == _blk_ids.end())
   {
     const std::set<SubdomainID> & valid_ids = _blk_mesh->meshSubdomains();
     std::vector<SubdomainID> diff;
 
     std::set_difference(_blk_ids.begin(),
                         _blk_ids.end(),
                         valid_ids.begin(),
                         valid_ids.end(),
                         std::back_inserter(diff));
 
     if (!diff.empty())
     {
       std::ostringstream msg;
       auto sep = " ";
       msg << "the following blocks (ids) do not exist on the mesh:";
       for (const auto & id : diff)
       {
         if (_blk_name.size() > 0)
         {
           auto & name =
               _blocks.at(std::find(_vec_ids.begin(), _vec_ids.end(), id) - _vec_ids.begin());
           if (std::to_string(id) != name)
             msg << sep << name << " (" << id << ")";
           else
             msg << sep << id;
         }
         else
           msg << sep << id;
         sep = ", ";
       }
       std::vector<SubdomainID> valid_ids_vec(valid_ids.begin(), valid_ids.end());
       auto valid_names = _blk_mesh->getSubdomainNames(valid_ids_vec);
       msg << "\nBlocks names (resp. ids) that do exist: " << Moose::stringify(valid_names) << " ("
           << Moose::stringify(valid_ids) << ")";
       moose_object->paramError("block", msg.str());
     }
   }
 
   // Get the mesh dimension for the blocks
   if (blockRestricted())
     _blk_dim = _blk_mesh->getBlocksMaxDimension(_blocks);
   else
     _blk_dim = _blk_mesh->dimension();
 
 #ifdef MOOSE_KOKKOS_ENABLED
   if (moose_object->isKokkosObject({}))
     initializeKokkosBlockRestrictable(_blk_mesh->getKokkosMesh());
 #endif
 }

◆ initializeKokkosBlockRestrictable()

void BlockRestrictable::initializeKokkosBlockRestrictable ( const Moose::Kokkos::Mesh * mesh )

protectedinherited

Referenced by BlockRestrictable::initializeBlockRestrictable().

◆ initialSetup()

void MooseVariableBase::initialSetup ( )

overridevirtualinherited

Gets called at the beginning of the simulation before this object is asked to do its job.

Reimplemented from SetupInterface.

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Definition at line 243 of file MooseVariableBase.C.

Referenced by MooseLinearVariableFV< Real >::initialSetup(), and MooseVariableFV< Real >::initialSetup().

 {
   // Currently the scaling vector is only used through AD residual computing objects
   if ((_var_kind == Moose::VAR_SOLVER) && _subproblem.haveADObjects() &&
       (_subproblem.automaticScaling() || (std::find_if(_scaling_factor.begin(),
                                                        _scaling_factor.end(),
                                                        [](const Real element) {
                                                          return !MooseUtils::absoluteFuzzyEqual(
                                                              element, 1.);
                                                        }) != _scaling_factor.end())))
 
     _sys.addScalingVector();
 }

◆ insert()

virtual void MooseVariableFieldBase::insert ( libMesh::NumericVector< libMesh::Number > & vector )

pure virtual

Insert the currently cached degree of freedom values into the provided vector.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Referenced by BlockRestrictionDebugOutput::printBlockRestrictionMap(), and ConstraintWarehouse::subdomainsCovered().

◆ insertLower()

virtual void MooseVariableFieldBase::insertLower ( libMesh::NumericVector< libMesh::Number > & vector )

pure virtual

Insert the currently cached degree of freedom values for a lower-dimensional element into the provided vector.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

◆ isArray()

virtual bool MooseVariableBase::isArray ( ) const

inlinevirtualinherited

Returns: whether this is an array variable

Reimplemented in MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, and MooseVariableField< Real >.

Definition at line 187 of file MooseVariableBase.h.

Referenced by SamplerBase::checkForStandardFieldVariableType(), componentName(), MultiAppVariableValueSamplePostprocessorTransfer::execute(), AdvancedOutput::initAvailableLists(), AdvancedOutput::initShowHideLists(), MooseVariableField< Real >::isArray(), MooseVariableBase::MooseVariableBase(), and MultiAppVariableValueSamplePostprocessorTransfer::MultiAppVariableValueSamplePostprocessorTransfer().

187 { return !_array_var_component_names.empty(); }

MooseVariableBase::_array_var_component_names

std::vector< std::string > _array_var_component_names

Array variable names when the variable is an array variable.

Definition: MooseVariableBase.h:262

◆ isBlockSubset() [1/2]

bool BlockRestrictable::isBlockSubset ( const std::set< SubdomainID > & ids ) const

inherited

Test if the class block ids are a subset of the supplied objects.

Parameters

ids	A std::set of Subdomains to check

Returns: True if all of the block ids for this class are found within the given ids (opposite of hasBlocks)

See also: hasBlocks

Definition at line 270 of file BlockRestrictable.C.

Referenced by BlockRestrictable::checkVariable(), BlockRestrictable::isBlockSubset(), NodalPatchRecoveryAux::NodalPatchRecoveryAux(), and ProjectedMaterialPropertyNodalPatchRecoveryAux::ProjectedMaterialPropertyNodalPatchRecoveryAux().

 {
   // An empty input is assumed to be ANY_BLOCK_ID
   if (ids.empty() || ids.find(Moose::ANY_BLOCK_ID) != ids.end())
     return true;
 
   if (_blk_ids.find(Moose::ANY_BLOCK_ID) != _blk_ids.end())
     return std::includes(ids.begin(),
                          ids.end(),
                          _blk_mesh->meshSubdomains().begin(),
                          _blk_mesh->meshSubdomains().end());
   else
     return std::includes(ids.begin(), ids.end(), _blk_ids.begin(), _blk_ids.end());
 }

◆ isBlockSubset() [2/2]

bool BlockRestrictable::isBlockSubset ( const std::vector< SubdomainID > & ids ) const

inherited

Test if the class block ids are a subset of the supplied objects.

Parameters

ids	A std::vector of Subdomains to check

Returns: True if all of the block ids for this class are found within the given ids (opposite of hasBlocks)

See also: hasBlocks

Definition at line 286 of file BlockRestrictable.C.

 {
   std::set<SubdomainID> ids_set(ids.begin(), ids.end());
   return isBlockSubset(ids_set);
 }

◆ isFV()

virtual bool MooseVariableFieldBase::isFV ( ) const

inlinevirtual

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Definition at line 81 of file MooseVariableFieldBase.h.

Referenced by ComputeFullJacobianThread::computeOnBoundary(), ComputeFullJacobianThread::computeOnElement(), ComputeFullJacobianThread::computeOnInterface(), ComputeFullJacobianThread::computeOnInternalFace(), GradientJumpIndicator::computeQpIntegral(), FVInitialConditionTempl< T >::FVInitialConditionTempl(), InterfaceDiffusiveFluxIntegralTempl< is_ad >::InterfaceDiffusiveFluxIntegralTempl(), InterfaceIntegralVariableValuePostprocessor::InterfaceIntegralVariableValuePostprocessor(), and InternalSideIndicatorTempl< ComputeValueType >::isVarFV().

81 { return false; }

◆ isKokkosObject()

bool MooseObject::isKokkosObject ( IsKokkosObjectKey && ) const

inlineinherited

Get whether this object is a Kokkos functor The parameter is set by the Kokkos base classes:

Moose::Kokkos::ResidualObject in KokkosResidualObject.K
Moose::Kokkos::MaterialBase in KokkosMaterialBase.K

Definition at line 72 of file MooseObject.h.

Referenced by BlockRestrictable::initializeBlockRestrictable(), and BoundaryRestrictable::initializeBoundaryRestrictable().

   {
     return parameters().isParamValid(MooseBase::kokkos_object_param);
   }

◆ isLowerD()

bool MooseVariableBase::isLowerD ( ) const

inlineinherited

Returns: whether this variable lives on lower dimensional blocks

Definition at line 192 of file MooseVariableBase.h.

192 { return _is_lower_d; }

MooseVariableBase::_is_lower_d

bool _is_lower_d

Whether this variable lives on lower dimensional blocks.

Definition: MooseVariableBase.h:259

◆ isNodal()

virtual bool MooseVariableBase::isNodal ( ) const

inlinevirtualinherited

Is this variable nodal.

Returns: true if it nodal, otherwise false

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Definition at line 120 of file MooseVariableBase.h.

Referenced by InitialConditionWarehouse::addObject(), AuxKernelTempl< Real >::AuxKernelTempl(), BoundsBase::BoundsBase(), MooseVariableBase::componentDofIndices(), ProjectionAux::computeValue(), MultiAppGeneralFieldNearestLocationTransfer::initialSetup(), and MeshDivisionAux::MeshDivisionAux().

120 { mooseError("Base class cannot determine this"); }

MooseBase::mooseError

void mooseError(Args &&... args) const

Emits an error prefixed with object name and type and optionally a file path to the top-level block p...

Definition: MooseBase.h:271

◆ isNodalDefined()

virtual bool MooseVariableFieldBase::isNodalDefined ( ) const

pure virtual

Is this variable defined at nodes.

Returns: true if it the variable is defined at nodes, otherwise false

Implemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Referenced by FunctorIC::gradient(), and FunctorIC::value().

◆ isParamSetByUser()

bool MooseBase::isParamSetByUser ( const std::string & name ) const

inlineinherited

Test if the supplied parameter is set by a user, as opposed to not set or set to default.

Parameters

name	The name of the parameter to test

Definition at line 205 of file MooseBase.h.

Referenced by SetupDebugAction::act(), DiffusionCG::addFEBCs(), DiffusionPhysicsBase::addInitialConditions(), MFEMMesh::buildMesh(), MFEMDomainSubMesh::buildSubMesh(), LibtorchNeuralNetControl::conditionalParameterError(), ConservativeAdvectionBCTempl< false >::ConservativeAdvectionBCTempl(), MooseApp::copyInputs(), DiffusionPhysicsBase::DiffusionPhysicsBase(), MooseApp::errorCheck(), MooseBase::getRenamedParam(), DefaultConvergenceBase::getSharedExecutionerParam(), AddVariableAction::init(), PhysicsBase::initializePhysics(), ElementSubdomainModifierBase::initialSetup(), MatrixSymmetryCheck::MatrixSymmetryCheck(), MeshDiagnosticsGenerator::MeshDiagnosticsGenerator(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), SolutionInvalidityOutput::output(), Output::Output(), MultiAppGeneralFieldTransfer::outputValueConflicts(), PetscExternalPartitioner::partition(), PiecewiseTabularBase::PiecewiseTabularBase(), MooseMesh::prepare(), SolutionUserObjectBase::readXda(), PhysicsBase::reportPotentiallyMissedParameters(), MooseApp::runInputFile(), MooseApp::runInputs(), MFEMSolverBase::setPreconditioner(), SetupMeshAction::setupMesh(), MooseApp::setupOptions(), SideSetsFromBoundingBoxGenerator::SideSetsFromBoundingBoxGenerator(), TagVectorAux::TagVectorAux(), TimedSubdomainModifier::TimedSubdomainModifier(), and XYDelaunayGenerator::XYDelaunayGenerator().

   {
     return _pars.isParamSetByUser(name);
   }

◆ isParamValid()

bool MooseBase::isParamValid ( const std::string & name ) const

inlineinherited

Test if the supplied parameter is valid.

Parameters

name	The name of the parameter to test

Definition at line 199 of file MooseBase.h.

199 { return _pars.isParamValid(name); }

MooseBase::_pars

const InputParameters & _pars

The object's parameters.

Definition: MooseBase.h:366

MooseBase::name

const std::string & name() const

Get the name of the class.

Definition: MooseBase.h:103

InputParameters::isParamValid

bool isParamValid(const std::string &name) const

This method returns parameters that have been initialized in one fashion or another, i.e.

Definition: InputParameters.C:386

◆ isVector()

virtual bool MooseVariableFieldBase::isVector ( ) const

pure virtual

Returns: true if this is a vector-valued element, false otherwise.

Implemented in MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, and MooseVariableField< Real >.

Referenced by SamplerBase::checkForStandardFieldVariableType(), MortarConstraint::computeJacobian(), MortarScalarBase::computeScalarOffDiagJacobian(), and MultiAppVariableValueSamplePostprocessorTransfer::execute().

◆ jacobianSetup()

void SetupInterface::jacobianSetup ( )

virtualinherited

Gets called just before the Jacobian is computed and before this object is asked to do its job.

Reimplemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, MooseVariableField< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, Function, Positions, Times, DiffusionLHDGKernel, IPHDGKernel, EqualValueEmbeddedConstraintTempl< is_ad >, ADKernelTempl< T >, IPHDGBC, DiffusionLHDGPrescribedGradientBC, and DiffusionLHDGDirichletBC.

Definition at line 58 of file SetupInterface.C.

Referenced by MooseVariableField< Real >::jacobianSetup(), and ComputeFVFluxJacobianThread< RangeType >::setup().

59 {

60 }

◆ kind()

Moose::VarKindType MooseVariableBase::kind ( ) const

inlineinherited

Kind of the variable (Nonlinear, Auxiliary, ...)

Definition at line 91 of file MooseVariableBase.h.

Referenced by ADPenaltyPeriodicSegmentalConstraint::ADPenaltyPeriodicSegmentalConstraint(), ADPeriodicSegmentalConstraint::ADPeriodicSegmentalConstraint(), FVFluxBC::FVFluxBC(), MooseVariableInterface< Real >::MooseVariableInterface(), PenaltyPeriodicSegmentalConstraint::PenaltyPeriodicSegmentalConstraint(), and PeriodicSegmentalConstraint::PeriodicSegmentalConstraint().

91 { return _var_kind; }

MooseVariableBase::_var_kind

Moose::VarKindType _var_kind

Variable type (see MooseTypes.h)

Definition: MooseVariableBase.h:226

◆ kokkosBlockElementID()

KOKKOS_FUNCTION ContiguousElementID BlockRestrictable::kokkosBlockElementID ( ThreadID tid ) const

inlineprotectedinherited

Get the contiguous element ID this Kokkos thread is operating on.

Parameters

tid	The thread ID

Returns: The contiguous element ID

Definition at line 280 of file BlockRestrictable.h.

   {
     return _kokkos_element_ids[tid];
   }

◆ kokkosBlockElementSideID()

KOKKOS_FUNCTION auto BlockRestrictable::kokkosBlockElementSideID ( ThreadID tid ) const

inlineprotectedinherited

Get the contiguous element ID - side index pair this Kokkos thread is operating on.

Parameters

tid	The thread ID

Returns: The contiguous element ID - side index pair

Definition at line 298 of file BlockRestrictable.h.

   {
     return _kokkos_element_side_ids[tid];
   }

◆ kokkosBlockNodeID()

KOKKOS_FUNCTION ContiguousElementID BlockRestrictable::kokkosBlockNodeID ( ThreadID tid ) const

inlineprotectedinherited

Get the contiguous node index this Kokkos thread is operating on.

Parameters

tid	The thread ID

Returns: the contiguous node ID

Definition at line 289 of file BlockRestrictable.h.

   {
     return _kokkos_node_ids[tid];
   }

◆ meshBlockIDs()

const std::set< SubdomainID > & BlockRestrictable::meshBlockIDs ( ) const

inherited

Return all of the SubdomainIDs for the mesh.

Returns: A set of all subdomians for the entire mesh

Definition at line 293 of file BlockRestrictable.C.

Referenced by BlockRestrictable::checkVariable(), ElementGroupCentroidPositions::ElementGroupCentroidPositions(), BlockRestrictable::getBlockCoordSystem(), BlockRestrictable::hasBlockMaterialPropertyHelper(), and SolutionIC::initialSetup().

 {
   return _blk_mesh->meshSubdomains();
 }

◆ messagePrefix()

std::string MooseBase::messagePrefix ( const bool hit_prefix = true ) const

inlineinherited

Returns: A prefix to be used in messages that contain the input file location associated with this object (if any) and the name and type of the object.

Definition at line 256 of file MooseBase.h.

Referenced by MooseBase::callMooseError(), MooseBase::errorPrefix(), MooseBase::mooseDeprecated(), MooseBase::mooseInfo(), and MooseBase::mooseWarning().

   {
     return messagePrefix(_pars, hit_prefix);
   }

◆ mooseDeprecated()

template<typename... Args>

void MooseBase::mooseDeprecated ( Args &&... args ) const

inlineinherited

Definition at line 314 of file MooseBase.h.

Referenced by FEProblemBase::addAuxArrayVariable(), FEProblemBase::addAuxScalarVariable(), FEProblemBase::addAuxVariable(), FEProblemBase::advanceMultiApps(), MultiApp::appProblem(), MooseMesh::buildSideList(), ChangeOverTimestepPostprocessor::ChangeOverTimestepPostprocessor(), AddVariableAction::determineType(), EigenProblem::EigenProblem(), Eigenvalue::Eigenvalue(), MooseMesh::elem(), UserForcingFunction::f(), FaceFaceConstraint::FaceFaceConstraint(), FunctionDT::FunctionDT(), RandomICBase::generateRandom(), MooseMesh::getBoundariesToElems(), DataFileInterface::getDataFileName(), DataFileInterface::getDataFileNameByName(), Control::getExecuteOptions(), FEProblemBase::getNonlinearSystem(), MooseApp::getRecoverFileBase(), FEProblemBase::getUserObjects(), FEProblemBase::hasPostprocessor(), MooseApp::hasRecoverFileBase(), MatDiffusionBase< Real >::MatDiffusionBase(), MultiAppNearestNodeTransfer::MultiAppNearestNodeTransfer(), MultiAppShapeEvaluationTransfer::MultiAppShapeEvaluationTransfer(), MultiAppUserObjectTransfer::MultiAppUserObjectTransfer(), NodalScalarKernel::NodalScalarKernel(), MooseMesh::node(), FixedPointSolve::numPicardIts(), RelationshipManager::operator>=(), PercentChangePostprocessor::PercentChangePostprocessor(), ReferenceResidualConvergence::ReferenceResidualConvergence(), Residual::Residual(), MooseMesh::setBoundaryToNormalMap(), Exodus::setOutputDimension(), MooseApp::setupOptions(), TagVectorAux::TagVectorAux(), UserForcingFunction::UserForcingFunction(), and VariableResidual::VariableResidual().

   {
     moose::internal::mooseDeprecatedStream(
         _console, false, true, messagePrefix(true), std::forward<Args>(args)...);
   }

◆ mooseDocumentedError()

template<typename... Args>

void MooseBase::mooseDocumentedError	(	const std::string &	repo_name,
		const unsigned int	issue_num,
		Args &&...	args
	)		const

inlineinherited

Definition at line 277 of file MooseBase.h.

Referenced by ArrayDGLowerDKernel::ArrayDGLowerDKernel(), ArrayHFEMDirichletBC::ArrayHFEMDirichletBC(), ArrayLowerDIntegratedBC::ArrayLowerDIntegratedBC(), DGLowerDKernel::DGLowerDKernel(), HFEMDirichletBC::HFEMDirichletBC(), and LowerDIntegratedBC::LowerDIntegratedBC().

   {
     callMooseError(moose::internal::formatMooseDocumentedError(
                        repo_name, issue_num, argumentsToString(std::forward<Args>(args)...)),
                    /* with_prefix = */ true);
   }

◆ mooseError()

template<typename... Args>

void MooseBase::mooseError ( Args &&... args ) const

inlineinherited

Emits an error prefixed with object name and type and optionally a file path to the top-level block parameter if available.

Definition at line 271 of file MooseBase.h.

   {
     callMooseError(argumentsToString(std::forward<Args>(args)...), /* with_prefix = */ true);
   }

◆ mooseErrorNonPrefixed()

template<typename... Args>

void MooseBase::mooseErrorNonPrefixed ( Args &&... args ) const

inlineinherited

Emits an error without the prefixing included in mooseError().

Definition at line 290 of file MooseBase.h.

   {
     callMooseError(argumentsToString(std::forward<Args>(args)...), /* with_prefix = */ false);
   }

◆ mooseInfo()

template<typename... Args>

void MooseBase::mooseInfo ( Args &&... args ) const

inlineinherited

Definition at line 321 of file MooseBase.h.

Referenced by SetupRecoverFileBaseAction::act(), AStableDirk4::AStableDirk4(), MeshDiagnosticsGenerator::checkNonConformalMeshFromAdaptivity(), MultiAppGeneralFieldNearestLocationTransfer::evaluateInterpValuesNearestNode(), PIDTransientControl::execute(), Executioner::Executioner(), ExplicitRK2::ExplicitRK2(), ExplicitTVDRK2::ExplicitTVDRK2(), DataFileInterface::getDataFilePath(), MFEMScalarFESpace::getFECName(), MultiAppTransfer::getPointInTargetAppFrame(), ImplicitMidpoint::ImplicitMidpoint(), ParsedDownSelectionPositions::initialize(), PropertyReadFile::initialize(), MultiAppGeneralFieldTransfer::initialSetup(), InversePowerMethod::InversePowerMethod(), LStableDirk2::LStableDirk2(), LStableDirk3::LStableDirk3(), LStableDirk4::LStableDirk4(), PNGOutput::makeMeshFunc(), NonlinearEigen::NonlinearEigen(), SolutionInvalidityOutput::output(), MultiAppGeneralFieldTransfer::outputValueConflicts(), MooseBase::paramInfo(), ProjectionAux::ProjectionAux(), ReferenceResidualConvergence::ReferenceResidualConvergence(), MFEMDataCollection::registerFields(), FEProblemBase::setRestartFile(), MooseApp::setupOptions(), SolutionUserObjectBase::SolutionUserObjectBase(), SymmetryTransformGenerator::SymmetryTransformGenerator(), TransientBase::takeStep(), and TransientBase::TransientBase().

   {
     moose::internal::mooseInfoStream(_console, messagePrefix(true), std::forward<Args>(args)...);
   }

◆ mooseWarning()

template<typename... Args>

void MooseBase::mooseWarning ( Args &&... args ) const

inlineinherited

Emits a warning prefixed with object name and type.

Definition at line 299 of file MooseBase.h.

Referenced by CopyMeshPartitioner::_do_partition(), AddKernelAction::act(), MeshOnlyAction::act(), AddFunctionAction::act(), MaterialOutputAction::act(), CommonOutputAction::act(), MFEMProblem::addFunction(), MooseMesh::addPeriodicVariable(), DiracKernelBase::addPoint(), BoundaryMarker::BoundaryMarker(), DistributedRectilinearMeshGenerator::buildCube(), MultiAppVariableValueSamplePostprocessorTransfer::cacheElemToPostprocessorData(), CartesianMeshGenerator::CartesianMeshGenerator(), CheckOutputAction::checkConsoleOutput(), MultiAppTransfer::checkMultiAppExecuteOn(), MeshDiagnosticsGenerator::checkNonMatchingEdges(), ActionComponent::checkRequiredTasks(), PhysicsBase::checkRequiredTasks(), SampledOutput::cloneMesh(), MultiAppGeneralFieldTransfer::closestToPosition(), VariableValueElementSubdomainModifier::computeSubdomainID(), GapValueAux::computeValue(), MultiApp::createApp(), DebugResidualAux::DebugResidualAux(), MeshDiagnosticsGenerator::diagnosticsLog(), CartesianGridDivision::divisionIndex(), CylindricalGridDivision::divisionIndex(), SphericalGridDivision::divisionIndex(), ElementMaterialSampler::ElementMaterialSampler(), Postprocessor::evaluateDotWarning(), MeshDivisionFunctorReductionVectorPostprocessor::execute(), ElementQualityChecker::finalize(), FiniteDifferencePreconditioner::FiniteDifferencePreconditioner(), FixedPointSolve::FixedPointSolve(), SubdomainPerElementGenerator::generate(), StitchMeshGenerator::generate(), ParsedGenerateSideset::generate(), MultiAppTransfer::getAppInfo(), FunctorBinnedValuesDivision::getBinIndex(), DataFileInterface::getDataFilePath(), PointSamplerBase::getLocalElemContainingPoint(), FEProblemBase::getMaterial(), LineValueSampler::getValue(), Terminator::handleMessage(), IndicatorMarker::IndicatorMarker(), CartesianGridDivision::initialize(), CylindricalGridDivision::initialize(), SphericalGridDivision::initialize(), ElementGroupCentroidPositions::initialize(), MultiAppGeneralFieldNearestLocationTransfer::initialSetup(), BoundsBase::initialSetup(), ReferenceResidualConvergence::initialSetup(), MultiAppGeneralFieldTransfer::initialSetup(), FEProblemBase::initialSetup(), AdvancedOutput::initPostprocessorOrVectorPostprocessorLists(), MaterialBase::initStatefulProperties(), LeastSquaresFit::LeastSquaresFit(), IterationAdaptiveDT::limitDTToPostprocessorValue(), MooseApp::loadLibraryAndDependencies(), FEProblemBase::mesh(), MultiAppGeneralFieldTransfer::MultiAppGeneralFieldTransfer(), NewmarkBeta::NewmarkBeta(), NodalPatchRecovery::NodalPatchRecovery(), NonlocalIntegratedBC::NonlocalIntegratedBC(), NonlocalKernel::NonlocalKernel(), Output::Output(), MaterialOutputAction::outputHelper(), MultiAppGeneralFieldTransfer::outputValueConflicts(), MooseBase::paramWarning(), PiecewiseConstantFromCSV::PiecewiseConstantFromCSV(), Executioner::problem(), PropertyReadFile::readData(), TestSourceStepper::rejectStep(), PhysicsBase::reportPotentiallyMissedParameters(), MaterialBase::resetQpProperties(), SecondTimeDerivativeAux::SecondTimeDerivativeAux(), MooseMesh::setCoordSystem(), SidesetAroundSubdomainUpdater::SidesetAroundSubdomainUpdater(), FEProblemBase::sizeZeroes(), TransientMultiApp::solveStep(), Tecplot::Tecplot(), TimeDerivativeAux::TimeDerivativeAux(), Checkpoint::updateCheckpointFiles(), SampledOutput::updateSample(), PiecewiseConstantFromCSV::value(), and VariableCondensationPreconditioner::VariableCondensationPreconditioner().

   {
     moose::internal::mooseWarningStream(_console, messagePrefix(true), std::forward<Args>(args)...);
   }

◆ mooseWarningNonPrefixed()

template<typename... Args>

void MooseBase::mooseWarningNonPrefixed ( Args &&... args ) const

inlineinherited

Emits a warning without the prefixing included in mooseWarning().

Definition at line 308 of file MooseBase.h.

   {
     moose::internal::mooseWarningStream(_console, std::forward<Args>(args)...);
   }

◆ name()

const std::string& MooseBase::name ( ) const

inlineinherited

Get the name of the class.

Returns: The name of the class

Definition at line 103 of file MooseBase.h.

   {
     mooseAssert(_name.size(), "Empty name");
     return _name;
   }

◆ needsGradientVectorStorage()

virtual bool MooseVariableFieldBase::needsGradientVectorStorage ( ) const

inlinevirtual

Check if this variable needs a raw vector of gradients at dof-values.

This is mainly used for finite volume variables.

Reimplemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

Definition at line 120 of file MooseVariableFieldBase.h.

120 { return false; }

◆ nodalDofIndex()

virtual const dof_id_type& MooseVariableFieldBase::nodalDofIndex ( ) const

pure virtual

◆ nodalDofIndexNeighbor()

virtual const dof_id_type& MooseVariableFieldBase::nodalDofIndexNeighbor ( ) const

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ number()

unsigned int MooseVariableBase::number ( ) const

inlineinherited

Get variable number coming from libMesh.

Returns: the libmesh variable number

Definition at line 60 of file MooseVariableBase.h.

60 { return _var_num; }

MooseVariableBase::_var_num

unsigned int _var_num

variable number (from libMesh)

Definition: MooseVariableBase.h:217

◆ numberOfDofs()

virtual unsigned int MooseVariableBase::numberOfDofs ( ) const

inlinevirtualinherited

Get the number of local DoFs.

Reimplemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

Definition at line 161 of file MooseVariableBase.h.

Referenced by BuildArrayVariableAux::compute(), TagVectorArrayVariableAux::compute(), and ComputeDiracThread::onElement().

161 { return _dof_indices.size(); }

MooseVariableBase::_dof_indices

std::vector< dof_id_type > _dof_indices

DOF indices.

Definition: MooseVariableBase.h:241

◆ numberOfDofsNeighbor()

virtual unsigned int MooseVariableFieldBase::numberOfDofsNeighbor ( )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ numBlocks()

unsigned int BlockRestrictable::numBlocks ( ) const

inherited

Return the number of blocks for this object.

Returns: The number of subdomains

Definition at line 217 of file BlockRestrictable.C.

Referenced by ElementCentroidPositions::initialize(), and QuadraturePointsPositions::initialize().

 {
   return (unsigned int)_blk_ids.size();
 }

◆ numKokkosBlockElements()

KOKKOS_FUNCTION dof_id_type BlockRestrictable::numKokkosBlockElements ( ) const

inlineprotectedinherited

Get the number of elements this Kokkos object is operating on.

Returns: The number of elements local to this process

Definition at line 261 of file BlockRestrictable.h.

261 { return _kokkos_element_ids.size(); }

BlockRestrictable::_kokkos_element_ids

Moose::Kokkos::Array< ContiguousElementID > _kokkos_element_ids

List of contiguous element IDs this Kokkos object is operating on.

Definition: BlockRestrictable.h:345

◆ numKokkosBlockNodes()

KOKKOS_FUNCTION dof_id_type BlockRestrictable::numKokkosBlockNodes ( ) const

inlineprotectedinherited

Get the number of nodes this Kokkos object is operating on.

Returns: The number of nodes local to this process

Definition at line 266 of file BlockRestrictable.h.

266 { return _kokkos_node_ids.size(); }

BlockRestrictable::_kokkos_node_ids

Moose::Kokkos::Array< ContiguousNodeID > _kokkos_node_ids

List of contiguous node IDs this Kokkos object is operating on.

Definition: BlockRestrictable.h:349

◆ numKokkosBlockSides()

KOKKOS_FUNCTION dof_id_type BlockRestrictable::numKokkosBlockSides ( ) const

inlineprotectedinherited

Get the number of sides this Kokkos object is operating on.

Returns: The number of sides local to this process

Definition at line 271 of file BlockRestrictable.h.

   {
     return _kokkos_element_side_ids.size();
   }

◆ oldestSolutionStateRequested()

virtual unsigned int MooseVariableFieldBase::oldestSolutionStateRequested ( ) const

pure virtual

The oldest solution state that is requested for this variable (0 = current, 1 = old, 2 = older, etc).

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, and MooseLinearVariableFV< Real >.

◆ order()

Order MooseVariableBase::order ( ) const

inherited

Get the order of this variable Note: Order enum can be implicitly converted to unsigned int.

Definition at line 209 of file MooseVariableBase.C.

Referenced by FEProblemBase::checkDisplacementOrders(), AuxScalarKernel::compute(), ScalarInitialCondition::compute(), ADScalarKernel::computeADJacobian(), ODEKernel::computeJacobian(), FVBoundaryScalarLagrangeMultiplierConstraint::computeJacobian(), FVScalarLagrangeMultiplierConstraint::computeOffDiagJacobian(), ODEKernel::computeOffDiagJacobianScalar(), Kernel::computeOffDiagJacobianScalar(), ScalarLagrangeMultiplier::computeOffDiagJacobianScalar(), MortarScalarBase::computeOffDiagJacobianScalar(), KernelScalarBase::computeOffDiagJacobianScalarLocal(), ArrayDGDiffusion::computeQpJacobian(), DGDiffusion::computeQpJacobian(), DGFunctionDiffusionDirichletBC::computeQpJacobian(), ArrayIntegratedBC::computeQpOffDiagJacobianScalar(), ArrayKernel::computeQpOffDiagJacobianScalar(), ADDGDiffusion::computeQpResidual(), DGDiffusion::computeQpResidual(), DGFunctionDiffusionDirichletBC::computeQpResidual(), ScalarKernel::computeResidual(), ODETimeKernel::computeResidual(), ADScalarKernel::computeResidual(), ODEKernel::computeResidual(), FVScalarLagrangeMultiplierConstraint::computeResidual(), FVBoundaryScalarLagrangeMultiplierConstraint::computeResidual(), KernelScalarBase::computeScalarOffDiagJacobianScalar(), MortarScalarBase::computeScalarOffDiagJacobianScalar(), ProjectionAux::computeValue(), ScalarCoupleable::coupledScalarOrder(), MultiAppPostprocessorToAuxScalarTransfer::execute(), FunctionScalarAux::FunctionScalarAux(), GapValueAux::GapValueAux(), ArrayDGDiffusion::initQpResidual(), NodalPatchRecovery::NodalPatchRecovery(), FEProblemBase::projectInitialConditionOnCustomRange(), ProjectionAux::ProjectionAux(), FEProblemBase::projectSolution(), and ScalarComponentIC::ScalarComponentIC().

 {
   return _fe_type.order;
 }

◆ paramError()

template<typename... Args>

void MooseBase::paramError	(	const std::string &	param,
		Args...	args
	)		const

inherited

Emits an error prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseError - only printing a message using the given args.

Definition at line 439 of file MooseBase.h.

 {
   _pars.paramError(param, std::forward<Args>(args)...);
 }

◆ parameters()

const InputParameters& MooseBase::parameters ( ) const

inlineinherited

Get the parameters of the object.

Returns: The parameters of the object

Definition at line 131 of file MooseBase.h.

131 { return _pars; }

MooseBase::_pars

const InputParameters & _pars

The object's parameters.

Definition: MooseBase.h:366

◆ paramInfo()

template<typename... Args>

void MooseBase::paramInfo	(	const std::string &	param,
		Args...	args
	)		const

inherited

Emits an informational message prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseInfo - only printing a message using the given args.

Definition at line 453 of file MooseBase.h.

Referenced by GridPartitioner::_do_partition(), ComboMarker::ComboMarker(), Control::Control(), FunctorIC::FunctorIC(), and TransientMultiApp::TransientMultiApp().

 {
   mooseInfo(_pars.paramMessage(param, std::forward<Args>(args)...));
 }

◆ paramWarning()

template<typename... Args>

void MooseBase::paramWarning	(	const std::string &	param,
		Args...	args
	)		const

inherited

Emits a warning prefixed with the file and line number of the given param (from the input file) along with the full parameter path+name followed by the given args as the message.

If this object's parameters were not created directly by the Parser, then this function falls back to the normal behavior of mooseWarning - only printing a message using the given args.

Definition at line 446 of file MooseBase.h.

Referenced by GridPartitioner::_do_partition(), MultiAppTransfer::checkParentAppUserObjectExecuteOn(), EigenProblem::checkProblemIntegrity(), CombinerGenerator::copyIntoMesh(), DefaultMultiAppFixedPointConvergence::DefaultMultiAppFixedPointConvergence(), MultiAppNearestNodeTransfer::execute(), FEProblemSolve::FEProblemSolve(), UniqueExtraIDMeshGenerator::generate(), PlaneIDMeshGenerator::generate(), Terminator::initialSetup(), SampledOutput::initSample(), MooseMesh::MooseMesh(), FEProblemBase::setPreserveMatrixSparsityPattern(), and Terminator::Terminator().

 {
   mooseWarning(_pars.paramMessage(param, std::forward<Args>(args)...));
 }

◆ phiFaceNeighborSize()

virtual std::size_t MooseVariableFieldBase::phiFaceNeighborSize ( ) const

pure virtual

Return phiFaceNeighbor size.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ phiFaceSize()

virtual std::size_t MooseVariableFieldBase::phiFaceSize ( ) const

pure virtual

Return phiFace size.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ phiLowerSize()

virtual std::size_t MooseVariableFieldBase::phiLowerSize ( ) const

pure virtual

Return the number of shape functions on the lower dimensional element for this variable.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ phiNeighborSize()

virtual std::size_t MooseVariableFieldBase::phiNeighborSize ( ) const

pure virtual

Return phiNeighbor size.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ phiSize()

virtual std::size_t MooseVariableFieldBase::phiSize ( ) const

pure virtual

Return phi size.

Implemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, and MooseVariableFV< Real >.

◆ prepare()

virtual void MooseVariableFieldBase::prepare ( )

pure virtual

Prepare the elemental degrees of freedom.

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ prepareAux()

virtual void MooseVariableFieldBase::prepareAux ( )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ prepareIC()

virtual void MooseVariableFieldBase::prepareIC ( )

pure virtual

Prepare the initial condition.

Implemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ prepareLowerD()

virtual void MooseVariableFieldBase::prepareLowerD ( )

pure virtual

Prepare a lower dimensional element's degrees of freedom.

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ prepareNeighbor()

virtual void MooseVariableFieldBase::prepareNeighbor ( )

pure virtual

Prepare the neighbor element degrees of freedom.

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ queryParam()

template<typename T >

const T * MooseBase::queryParam ( const std::string & name ) const

inherited

Query a parameter for the object.

If the parameter is not valid, nullptr will be returned

Parameters

name	The name of the parameter

Returns: A pointer to the parameter value, if it exists

Definition at line 395 of file MooseBase.h.

 {
   return isParamValid(name) ? &getParam<T>(name) : nullptr;
 }

◆ reinitAux()

virtual void MooseVariableFieldBase::reinitAux ( )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ reinitAuxNeighbor()

virtual void MooseVariableFieldBase::reinitAuxNeighbor ( )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ reinitNode()

virtual void MooseVariableFieldBase::reinitNode ( )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ reinitNodes()

virtual void MooseVariableFieldBase::reinitNodes ( const std::vector< dof_id_type > & nodes )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ reinitNodesNeighbor()

virtual void MooseVariableFieldBase::reinitNodesNeighbor ( const std::vector< dof_id_type > & nodes )

pure virtual

Implemented in MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, and MooseVariableFE< Real >.

◆ residualSetup()

void SetupInterface::residualSetup ( )

virtualinherited

Gets called just before the residual is computed and before this object is asked to do its job.

Reimplemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, MooseVariableField< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, Function, NodeFaceConstraint, Positions, and Times.

Definition at line 63 of file SetupInterface.C.

Referenced by MooseVariableField< Real >::residualSetup(), ComputeFVFluxResidualThread< RangeType >::setup(), and ComputeFVFluxRJThread< RangeType >::setup().

64 {

65 }

◆ scalingFactor() [1/2]

void MooseVariableBase::scalingFactor ( const std::vector< Real > & factor )

inherited

Set the scaling factor for this variable.

Definition at line 235 of file MooseVariableBase.C.

 {
   mooseAssert(factor.size() == _count, "Inconsistent scaling factor size");
   for (const auto i : make_range(_count))
     _scaling_factor[i] = factor[i];
 }

◆ scalingFactor() [2/2]

Real MooseVariableBase::scalingFactor ( ) const

inlineinherited

Get the scaling factor for this variable.

Definition at line 101 of file MooseVariableBase.h.

Referenced by MooseVariableBase::MooseVariableBase().

101 { return _scaling_factor[0]; }

MooseVariableBase::_scaling_factor

std::vector< Real > _scaling_factor

scaling factor for this variable

Definition: MooseVariableBase.h:253

◆ setActiveTags()

void MooseVariableBase::setActiveTags ( const std::set< TagID > & vtags )

inlinevirtualinherited

Set the active vector tags.

Parameters

vtags Additional vector tags that this variable will need to query at dof indices for, in addition to our own required solution tags

Reimplemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, and MooseVariableScalar.

Definition at line 266 of file MooseVariableBase.h.

 {
   mooseError("setActiveTags must be overridden in derived classes.");
 }

◆ sizeMatrixTagData()

virtual void MooseVariableBase::sizeMatrixTagData ( )

inlinevirtualinherited

Size data structures related to matrix tagging.

Reimplemented in MooseVariableFE< OutputType >, MooseVariableFE< ComputeValueType >, MooseVariableFE< T >, MooseVariableFE< RealEigenVector >, MooseVariableFE< VectorValue< Real > >, MooseVariableFE< RealVectorValue >, MooseVariableFE< Real >, MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseLinearVariableFV< OutputType >, MooseLinearVariableFV< ComputeValueType >, MooseLinearVariableFV< T >, MooseLinearVariableFV< RealEigenVector >, MooseLinearVariableFV< RealVectorValue >, MooseLinearVariableFV< Real >, and MooseVariableScalar.

Definition at line 197 of file MooseVariableBase.h.

197 { mooseError("Derived class must implement this method"); }

MooseBase::mooseError

void mooseError(Args &&... args) const

Emits an error prefixed with object name and type and optionally a file path to the top-level block p...

Definition: MooseBase.h:271

◆ subdomainSetup()

void SetupInterface::subdomainSetup ( )

virtualinherited

Gets called when the subdomain changes (i.e.

in a Jacobian or residual loop) and before this object is asked to do its job

Reimplemented in MaterialBase, Material, Moose::Kokkos::MaterialBase, GeneralUserObject, NodalUserObject, Constraint, and ThreadedGeneralUserObject.

Definition at line 68 of file SetupInterface.C.

69 {

70 }

◆ sys() [1/2]

SystemBase& MooseVariableBase::sys ( )

inlineinherited

Get the system this variable is part of.

Definition at line 70 of file MooseVariableBase.h.

70 { return _sys; }

MooseVariableBase::_sys

SystemBase & _sys

System this variable is part of.

Definition: MooseVariableBase.h:211

◆ sys() [2/2]

const SystemBase& MooseVariableBase::sys ( ) const

inlineinherited

Get the system this variable is part of.

Definition at line 75 of file MooseVariableBase.h.

75 { return _sys; }

MooseVariableBase::_sys

SystemBase & _sys

System this variable is part of.

Definition: MooseVariableBase.h:211

◆ timestepSetup()

void SetupInterface::timestepSetup ( )

virtualinherited

Gets called at the beginning of the timestep before this object is asked to do its job.

Reimplemented in MooseVariableFV< OutputType >, MooseVariableFV< ComputeValueType >, MooseVariableFV< T >, MooseVariableFV< RealEigenVector >, MooseVariableFV< RealVectorValue >, MooseVariableFV< Real >, MooseVariableField< OutputType >, MooseVariableField< RT >, MooseVariableField< ComputeValueType >, MooseVariableField< T >, MooseVariableField< RealEigenVector >, MooseVariableField< RealVectorValue >, MooseVariableField< Real >, Function, Positions, Times, ElementSubdomainModifierBase, SolutionUserObjectBase, Console, VectorPostprocessorVisualizationAux, EqualValueEmbeddedConstraintTempl< is_ad >, NumNonlinearIterations, VectorMemoryUsage, JSONOutput, and MemoryUsage.

Definition at line 53 of file SetupInterface.C.

Referenced by JSONOutput::timestepSetup(), and MooseVariableField< Real >::timestepSetup().

54 {

55 }

◆ totalVarDofs()

unsigned int MooseVariableBase::totalVarDofs ( )

inlineinherited

Definition at line 86 of file MooseVariableBase.h.

86 { return allDofIndices().size(); }

MooseVariableBase::allDofIndices

const std::vector< dof_id_type > & allDofIndices() const

Get all global dofindices for the variable.

Definition: MooseVariableBase.C:197

◆ type()

const std::string& MooseBase::type ( ) const

inlineinherited

Get the type of this class.

Returns: the name of the type of this class

Definition at line 93 of file MooseBase.h.

   {
     mooseAssert(_type.size(), "Empty type");
     return _type;
   }

◆ typeAndName()

std::string MooseBase::typeAndName ( ) const

inherited

Get the class's combined type and name; useful in error handling.

Returns: The type and name of this class in the form '<type()> "<name()>"'.

Definition at line 57 of file MooseBase.C.

Referenced by FEProblemBase::addPostprocessor(), MaterialPropertyStorage::addProperty(), FEProblemBase::addReporter(), FEProblemBase::addVectorPostprocessor(), MeshGeneratorSystem::dataDrivenError(), ReporterContext< std::vector< T > >::finalize(), and ReporterData::getReporterInfo().

 {
   return type() + std::string(" \"") + name() + std::string("\"");
 }

◆ uniqueName()

MooseObjectName MooseBase::uniqueName ( ) const

inherited

Returns: The unique name for accessing input parameters of this object in the InputParameterWarehouse

Definition at line 69 of file MooseBase.C.

Referenced by MooseBase::connectControllableParams(), and Action::uniqueActionName().

 {
   if (!_pars.have_parameter<std::string>(unique_name_param))
     mooseError("uniqueName(): Object does not have a unique name");
   return MooseObjectName(_pars.get<std::string>(unique_name_param));
 }

◆ uniqueParameterName()

MooseObjectParameterName MooseBase::uniqueParameterName ( const std::string & parameter_name ) const

inherited

Returns: The unique parameter name of a valid parameter of this object for accessing parameter controls

Definition at line 63 of file MooseBase.C.

 {
   return MooseObjectParameterName(getBase(), name(), parameter_name);
 }

◆ useDual()

bool MooseVariableBase::useDual ( ) const

inlineinherited

Get dual mortar option.

Definition at line 80 of file MooseVariableBase.h.

Referenced by MortarConstraintBase::MortarConstraintBase().

80 { return _use_dual; }

MooseVariableBase::_use_dual

bool _use_dual

If dual mortar approach is used.

Definition: MooseVariableBase.h:256

◆ validParams()

InputParameters MooseVariableFieldBase::validParams ( )

static

Definition at line 16 of file MooseVariableFieldBase.C.

Referenced by MooseVariableField< Real >::validParams().

 {
   return MooseVariableBase::validParams();
 }

Member Data Documentation

◆ _action_factory

ActionFactory& ParallelParamObject::_action_factory

protectedinherited

Builds Actions.

Definition at line 40 of file ParallelParamObject.h.

Referenced by AddActionComponentAction::act(), CreateMeshSetupActionsForComponents::act(), ActionComponent::checkRequiredTasks(), PhysicsBase::checkRequiredTasks(), CommonOutputAction::create(), AddVariableAction::createInitialConditionAction(), DynamicObjectRegistrationAction::DynamicObjectRegistrationAction(), CreateExecutionerAction::setupAutoPreconditioning(), and ReadExecutorParamsAction::setupAutoPreconditioning().

◆ _app

MooseApp& MooseBase::_app

protectedinherited

The MOOSE application this is associated with.

Definition at line 357 of file MooseBase.h.

◆ _array_var_component_names

std::vector<std::string> MooseVariableBase::_array_var_component_names

protectedinherited

Array variable names when the variable is an array variable.

Definition at line 262 of file MooseVariableBase.h.

Referenced by MooseVariableBase::arrayVariableComponent(), MooseVariableBase::isArray(), and MooseVariableBase::MooseVariableBase().

◆ _assembly

Assembly& MooseVariableBase::_assembly

protectedinherited

Assembly data.

Definition at line 235 of file MooseVariableBase.h.

Referenced by MooseLinearVariableFV< Real >::MooseLinearVariableFV(), MooseVariableFE< Real >::MooseVariableFE(), and MooseVariableFV< Real >::MooseVariableFV().

◆ _blk_material_data

const MaterialData* BlockRestrictable::_blk_material_data

protectedinherited

Pointer to the MaterialData class for this object.

Definition at line 232 of file BlockRestrictable.h.

Referenced by BlockRestrictable::hasBlockMaterialProperty(), and BlockRestrictable::initializeBlockRestrictable().

◆ _console

const ConsoleStream ConsoleStreamInterface::_console

inherited

An instance of helper class to write streams to the Console objects.

Definition at line 31 of file ConsoleStreamInterface.h.

◆ _count

const unsigned int MooseVariableBase::_count

protectedinherited

Number of variables in the array.

Definition at line 250 of file MooseVariableBase.h.

Referenced by componentName(), MooseVariableBase::count(), MooseVariableBase::MooseVariableBase(), and MooseVariableBase::scalingFactor().

◆ _current_execute_flag

const ExecFlagType& SetupInterface::_current_execute_flag

protectedinherited

Reference to FEProblemBase.

Definition at line 86 of file SetupInterface.h.

Referenced by PseudoTimestep::execute().

◆ _dof_indices

std::vector<dof_id_type> MooseVariableBase::_dof_indices

protectedinherited

DOF indices.

Definition at line 241 of file MooseVariableBase.h.

Referenced by MooseVariableBase::clearAllDofIndices(), MooseVariableScalar::computeAD(), MooseVariableBase::dofIndices(), MooseVariableScalar::evaluate(), MooseVariableScalar::insert(), MooseVariableBase::numberOfDofs(), MooseVariableScalar::reinit(), MooseVariableScalar::setValue(), and MooseVariableScalar::setValues().

◆ _dof_map

const libMesh::DofMap& MooseVariableBase::_dof_map

protectedinherited

DOF map.

Definition at line 238 of file MooseVariableBase.h.

Referenced by MooseVariableBase::dofMap(), MooseVariableScalar::insert(), and MooseVariableScalar::reinit().

◆ _enabled

const bool& MooseObject::_enabled

protectedinherited

Reference to the "enable" InputParameters, used by Controls for toggling on/off MooseObjects.

Definition at line 80 of file MooseObject.h.

Referenced by MooseObject::enabled().

◆ _execute_enum

const ExecFlagEnum& SetupInterface::_execute_enum

protectedinherited

Execute settings for this object.

Definition at line 83 of file SetupInterface.h.

◆ _factory

Factory& ParallelParamObject::_factory

protectedinherited

The Factory associated with the MooseApp.

Definition at line 37 of file ParallelParamObject.h.

Referenced by ElementIDOutputAction::act(), AutoCheckpointAction::act(), PartitionerAction::act(), CreateExecutionerAction::act(), CreateProblemAction::act(), CreateProblemDefaultAction::act(), CombineComponentsMeshes::act(), SetupMeshAction::act(), AdaptivityAction::act(), SetupPredictorAction::act(), SetupTimeStepperAction::act(), SetupDebugAction::act(), ComposeTimeStepperAction::act(), SetupPreconditionerAction::act(), SetupResidualDebugAction::act(), MaterialDerivativeTestAction::act(), CreateDisplacedProblemAction::act(), SetAdaptivityOptionsAction::act(), DisplayGhostingAction::act(), AddControlAction::act(), MaterialOutputAction::act(), AddPeriodicBCAction::act(), CommonOutputAction::act(), AddNodalNormalsAction::act(), ComponentMeshTransformHelper::addMeshGenerators(), CylinderComponent::addMeshGenerators(), DiffusionPhysicsBase::addPostprocessors(), CreateDisplacedProblemAction::addProxyRelationshipManagers(), Action::addRelationshipManager(), SampledOutput::cloneMesh(), DynamicObjectRegistrationAction::DynamicObjectRegistrationAction(), ActionComponent::getFactory(), PhysicsBase::getFactory(), MaterialOutputAction::getParams(), and ProjectedStatefulMaterialStorageAction::processProperty().

◆ _fe_type

libMesh::FEType MooseVariableBase::_fe_type

protectedinherited

The FEType associated with this variable.

Definition at line 214 of file MooseVariableBase.h.

Referenced by MooseVariableBase::feType(), MooseVariableBase::MooseVariableBase(), MooseVariableConstMonomial::MooseVariableConstMonomial(), and MooseVariableBase::order().

◆ _index

unsigned int MooseVariableBase::_index

protectedinherited

variable number within MOOSE

Definition at line 220 of file MooseVariableBase.h.

◆ _is_eigen

bool MooseVariableBase::_is_eigen

protectedinherited

Whether or not this variable operates on eigen kernels.

Definition at line 223 of file MooseVariableBase.h.

Referenced by MooseVariableBase::eigen().

◆ _is_lower_d

bool MooseVariableBase::_is_lower_d

protectedinherited

Whether this variable lives on lower dimensional blocks.

Definition at line 259 of file MooseVariableBase.h.

Referenced by MooseVariableBase::isLowerD(), and MooseVariableBase::MooseVariableBase().

◆ _mesh

MooseMesh& MooseVariableBase::_mesh

protectedinherited

mesh the variable is active in

Definition at line 244 of file MooseVariableBase.h.

Referenced by MooseLinearVariableFV< Real >::evaluate(), MooseLinearVariableFV< Real >::evaluateGradient(), and MooseVariableBase::MooseVariableBase().

◆ _name

const std::string& MooseBase::_name

protectedinherited

The name of this class.

Definition at line 363 of file MooseBase.h.

◆ _pars

const InputParameters& MooseBase::_pars

protectedinherited

The object's parameters.

Definition at line 366 of file MooseBase.h.

Referenced by AddFVICAction::act(), AddICAction::act(), CreateProblemAction::act(), CreateProblemDefaultAction::act(), SetupMeshAction::act(), ComposeTimeStepperAction::act(), SetupDebugAction::act(), AddAuxKernelAction::act(), AddPeriodicBCAction::act(), CommonOutputAction::act(), FunctorMaterial::addFunctorPropertyByBlocks(), BreakMeshByBlockGeneratorBase::BreakMeshByBlockGeneratorBase(), PiecewiseTabularBase::buildFromFile(), PNGOutput::calculateRescalingValues(), MooseBase::callMooseError(), MooseBase::connectControllableParams(), Console::Console(), MooseApp::copyInputs(), MaterialBase::declareADProperty(), MaterialBase::declareProperty(), FEProblemSolve::FEProblemSolve(), FunctionMaterialBase< is_ad >::FunctionMaterialBase(), FileMeshGenerator::generate(), MooseBase::getBase(), MooseBase::getCheckedPointerParam(), MaterialBase::getGenericZeroMaterialProperty(), MooseBase::getHitNode(), MeshGenerator::getMeshGeneratorNameFromParam(), MeshGenerator::getMeshGeneratorNamesFromParam(), MooseBase::getParam(), MooseBase::hasBase(), MeshGenerator::hasGenerateData(), AddVariableAction::init(), AdvancedOutput::initExecutionTypes(), Console::initialSetup(), MooseBase::isParamSetByUser(), MooseBase::isParamValid(), MultiApp::keepSolutionDuringRestore(), MooseBase::messagePrefix(), MooseBase::MooseBase(), MooseApp::outputMachineReadableData(), MooseBase::paramError(), MooseBase::parameters(), MooseBase::paramInfo(), MooseBase::paramWarning(), MooseMesh::prepare(), Eigenvalue::prepareSolverOptions(), MooseMesh::setCoordSystem(), MooseMesh::setPartitionerHelper(), SetupMeshAction::setupMesh(), TransientBase::setupTimeIntegrator(), MooseApp::showInputs(), and MooseBase::uniqueName().

◆ _scaling_factor

std::vector<Real> MooseVariableBase::_scaling_factor

protectedinherited

scaling factor for this variable

Definition at line 253 of file MooseVariableBase.h.

Referenced by MooseVariableBase::arrayScalingFactor(), MooseVariableBase::initialSetup(), and MooseVariableBase::scalingFactor().

◆ _subproblem

SubProblem& MooseVariableBase::_subproblem

protectedinherited

Problem this variable is part of.

Definition at line 229 of file MooseVariableBase.h.

Referenced by MooseVariableScalar::computeAD(), MooseVariableScalar::evaluate(), and MooseVariableBase::initialSetup().

◆ _sys

SystemBase& MooseVariableBase::_sys

protectedinherited

◆ _tid

THREAD_ID MooseVariableBase::_tid

protectedinherited

Thread ID.

Definition at line 247 of file MooseVariableBase.h.

Referenced by MooseLinearVariableFV< Real >::MooseLinearVariableFV(), MooseVariableFE< Real >::MooseVariableFE(), MooseVariableFV< Real >::MooseVariableFV(), and MooseVariableScalar::reinit().

◆ _type

const std::string& MooseBase::_type

protectedinherited

The type of this class.

Definition at line 360 of file MooseBase.h.

Referenced by ExplicitTimeIntegrator::ExplicitTimeIntegrator(), FEProblemSolve::FEProblemSolve(), FillBetweenCurvesGenerator::generate(), FillBetweenPointVectorsGenerator::generate(), FillBetweenSidesetsGenerator::generate(), ExplicitTimeIntegrator::init(), FEProblemBase::init(), MooseBase::MooseBase(), MooseStaticCondensationPreconditioner::MooseStaticCondensationPreconditioner(), PhysicsBasedPreconditioner::PhysicsBasedPreconditioner(), FEProblemBase::solverTypeString(), and MooseBase::type().

◆ _use_dual

bool MooseVariableBase::_use_dual

protectedinherited

If dual mortar approach is used.

Definition at line 256 of file MooseVariableBase.h.

Referenced by MooseVariableBase::useDual().

◆ _var_kind

Moose::VarKindType MooseVariableBase::_var_kind

protectedinherited

Variable type (see MooseTypes.h)

Definition at line 226 of file MooseVariableBase.h.

Referenced by MooseVariableBase::initialSetup(), and MooseVariableBase::kind().

◆ _var_num

unsigned int MooseVariableBase::_var_num

protectedinherited

variable number (from libMesh)

Definition at line 217 of file MooseVariableBase.h.

Referenced by activeOnSubdomain(), activeSubdomains(), MooseVariableBase::MooseVariableBase(), MooseVariableBase::number(), and MooseVariableScalar::reinit().

◆ _variable

const libMesh::Variable& MooseVariableBase::_variable

protectedinherited

libMesh variable object for this variable

Definition at line 232 of file MooseVariableBase.h.

◆ app_param

const std::string MooseBase::app_param = "_moose_app"

staticinherited

The name of the parameter that contains the MooseApp.

Definition at line 59 of file MooseBase.h.

Referenced by FEProblemBase::addAnyRedistributers(), MeshGenerator::addMeshSubgenerator(), InputParameters::callMooseError(), ActionFactory::create(), Factory::getValidParams(), ActionFactory::getValidParams(), AutomaticMortarGeneration::initOutput(), SetupMeshAction::modifyParamsForUseSplit(), and MortarNodalGeometryOutput::validParams().

◆ kokkos_object_param

const std::string MooseBase::kokkos_object_param = "_kokkos_object"

staticinherited

The name of the parameter that indicates an object is a Kokkos functor.

Definition at line 64 of file MooseBase.h.

Referenced by MooseObject::isKokkosObject().

◆ moose_base_param

const std::string MooseBase::moose_base_param = "_moose_base"

staticinherited

The name of the parameter that contains the moose system base.

Definition at line 61 of file MooseBase.h.

Referenced by InputParameters::getBase(), InputParameters::hasBase(), and InputParameters::registerBase().

◆ name_param

const std::string MooseBase::name_param = "_object_name"

staticinherited

The name of the parameter that contains the object name.

Definition at line 55 of file MooseBase.h.

Referenced by InputParameterWarehouse::addInputParameters(), MooseObjectUnitTest::buildObjects(), ActionFactory::create(), AppFactory::create(), InputParameters::getObjectName(), AutomaticMortarGeneration::initOutput(), InputParameters::isMooseBaseObject(), MooseMesh::prepare(), CouplingFunctorCheckAction::validParams(), and MooseBase::validParams().

◆ type_param

const std::string MooseBase::type_param = "_type"

staticinherited

The name of the parameter that contains the object type.

Definition at line 53 of file MooseBase.h.

Referenced by ActionFactory::create(), AppFactory::create(), InputParameters::getObjectType(), Factory::initialize(), InputParameters::isMooseBaseObject(), InputParameters::queryObjectType(), MooseBase::validParams(), and MortarNodalGeometryOutput::validParams().

◆ unique_name_param

const std::string MooseBase::unique_name_param = "_unique_name"

staticinherited

The name of the parameter that contains the unique object name.

Definition at line 57 of file MooseBase.h.

Referenced by InputParameterWarehouse::addInputParameters(), AppFactory::create(), InputParameterWarehouse::removeInputParameters(), MooseBase::uniqueName(), and MooseBase::validParams().

The documentation for this class was generated from the following files:

include/variables/MooseVariableFieldBase.h
src/variables/MooseVariableFieldBase.C

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Static Public Attributes

Protected Member Functions

Protected Attributes

Detailed Description

Member Typedef Documentation

◆ DataFileParameterType

Constructor & Destructor Documentation

◆ MooseVariableFieldBase()

Member Function Documentation

◆ activeOnSubdomain()

◆ activeOnSubdomains()

◆ activeSubdomains()

◆ add()

◆ allDofIndices()

◆ arrayScalingFactor()

◆ arrayVariableComponent()

◆ blockIDs()

◆ blockRestricted()

◆ blocks()

◆ blocksMaxDimension()

◆ buildOutputHideVariableList()

◆ callMooseError() [1/2]

◆ callMooseError() [2/2]

◆ checkVariable()

◆ clearAllDofIndices()

◆ clearDofIndices()

◆ componentDofIndices()

◆ componentName()

◆ computeElemValues()

◆ computeElemValuesFace()

◆ computeFaceValues()

◆ computeLowerDValues()

◆ computeNeighborValues()

◆ computeNeighborValuesFace()

◆ computeNodalNeighborValues()

◆ computeNodalValues()

◆ connectControllableParams()

◆ count()

◆ currentElem()

◆ customSetup()

◆ doDerivatives()

◆ dofIndices()

◆ dofIndicesLower()

◆ dofIndicesNeighbor()

◆ dofMap()

◆ eigen() [1/2]

◆ eigen() [2/2]

◆ enabled()

◆ errorPrefix()

◆ feType()

◆ fieldType()

◆ getBase()

◆ getBlockCoordSystem()

◆ getCheckedPointerParam()

◆ getContinuity()

◆ getDataFileName()

◆ getDataFileNameByName()

◆ getDataFilePath()

◆ getDofIndices()

◆ getExecuteOnEnum()

◆ getHitNode()

◆ getMooseApp()

◆ getOutputs()

◆ getParam() [1/2]

◆ getParam() [2/2]

◆ getRenamedParam()

◆ getSharedPtr() [1/2]

◆ getSharedPtr() [2/2]

◆ getSolution()

◆ hasBase()

◆ hasBlockMaterialProperty()

◆ hasBlockMaterialPropertyHelper()

◆ hasBlocks() [1/6]

◆ hasBlocks() [2/6]

◆ hasBlocks() [3/6]

◆ hasBlocks() [4/6]