- fuel_pin_geometryName of fuel pin geometry UserObject which is required for Layered1D or Layered2D calculations.
C++ Type:UserObjectName
Controllable:No
Description:Name of fuel pin geometry UserObject which is required for Layered1D or Layered2D calculations.
- variableThe name of the variable that this object operates on
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this object operates on
LayeredElementIntegralPowerPostprocessor
Computes the power given the fission rate and energy per fission for Layered1D and Layered2D geometeries.
Description
LayeredElementIntegralPowerPostprocessor computes the power in the supplied block given the fission rate variable and energy per fission for Layered1D and Layered2D geometries.
Example Input Syntax
[Postprocessors<<<{"href": "../../syntax/Postprocessors/index.html"}>>>]
[rod_total_power]
type = ElementIntegralPower<<<{"description": "Computes the power given the fission rate and energy per fission.", "href": "ElementIntegralPower.html"}>>>
variable<<<{"description": "The name of the variable that this object operates on"}>>> = T
fission_rate<<<{"description": "Coupled fission rate"}>>> = fission_rate
block<<<{"description": "The list of blocks (ids or names) that this object will be applied"}>>> = 1
energy_per_fission<<<{"description": "Energy released per fission (J/fission)"}>>> = 3.2e-11
execute_on<<<{"description": "The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html."}>>> = 'initial timestep_end'
[]
[]Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- burnup_functionBurnup function
C++ Type:BurnupFunctionName
Unit:(no unit assumed)
Controllable:No
Description:Burnup function
- energy_per_fission3.28451e-11Energy released per fission (J/fission)
Default:3.28451e-11
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Energy released per fission (J/fission)
- fission_rateCoupled fission rate
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Coupled fission rate
- fission_rate_materialfission_rate_materialFission rate material property name
Default:fission_rate_material
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:Fission rate material property name
- use_absolute_valueFalseWhether to use absolute value of the variable or not
Default:False
C++ Type:bool
Controllable:No
Description:Whether to use absolute value of the variable or not
- use_material_fission_rateFalseFlag to use the material 'fission_rate_material' instead of variable fission rate
Default:False
C++ Type:bool
Controllable:No
Description:Flag to use the material 'fission_rate_material' instead of variable fission rate
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Options:XFEM_MARK, NONE, INITIAL, LINEAR, NONLINEAR_CONVERGENCE, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM, TRANSFER
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
Execution Scheduling Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- outputsVector of output names where you would like to restrict the output of variables(s) associated with this object
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Material Property Retrieval Parameters
Input Files
- (assessment/metallic_fuel/EBRII/X441/analysis/group_A/x441_1_5D_A.i)
- (assessment/MOX/JOYO/B14/PTM003/analysis/b14_ptm003_1D_sample2.i)
- (examples/mox_fuel/mox_porosity_demo.i)
- (assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample2.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_G/x441_1_5D_G.i)
- (assessment/LWR/benchmark/FUMEXII_simplified_cases/analysis/27_1/vitanza_1pt5.i)
- (test/tests/element_integral_power/element_integral_power_1D.i)
- (examples/1.5D_rodlet_10pellets/1_5D.i)
- (assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/TSQ002_1pt5.i)
- (assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_twentyslice.i)
- (examples/accident_tolerant_fuel/u3si2_sic/u3si2_outer_monolith_1.5D.i)
- (assessment/LWR/validation/Riso_GE7_ZX115/analysis/Riso_GE7_1pt5.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_D/x441_1_5D_D.i)
- (assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample3.i)
- (examples/1.5D_restart/Smeared_1.5D.i)
- (test/tests/mox_pore_velocity/MOXPoreVelocityVaporPressure.i)
- (assessment/MOX/JOYO/B14/PTM003/analysis/b14_ptm003_1D_sample1.i)
- (test/tests/mox_pore_velocity/MOXActinide.i)
- (assessment/MOX/JOYO/B14/PTM002/analysis/b14_ptm002_1D_sample1.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_F/x441_1_5D_F.i)
- (assessment/MOX/JOYO/B14/PTM010/analysis/b14_ptm010_1D_sample1.i)
- (examples/1.5D_rodlet_10pellets/1_5D_friction.i)
- (assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample3_noAm.i)
- (assessment/LWR/validation/RE_Ginna_Rodlets/analysis/RE_Ginna_rodlet-4/RE_Ginna_rodlet_4_1pt5.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_E/x441_1_5D_E.i)
- (assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_tenslice.i)
- (test/tests/mox_pore_velocity/MOXPoreVelocity.i)
- (assessment/MOX/JOYO/B14/PTM010/analysis/b14_ptm010_1D_sample2.i)
- (assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_fortyslice.i)
- (examples/temperature_tables/layered1D_cases/1pt5D.i)
- (test/tests/layered_1D/radial_power_factor.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_B/x441_1_5D_B.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_C/x441_1_5D_C.i)
- (test/tests/mox_pore_velocity/MOXActinide_simple.i)
- (assessment/MOX/JOYO/B14/PTM002/analysis/b14_ptm002_1D_sample2.i)
- (examples/pore_migration/paper_solid.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/group_H/x441_1_5D_H.i)
- (assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ022/TSQ022_1pt5.i)
- (assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample1.i)
- (assessment/metallic_fuel/EBRII/X441/analysis/x441_base_1_5D.i)
- (assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_hundredslice.i)
(test/tests/element_integral_power/element_integral_power_test.i)
# Tests the ElementIntegralPower postprocessor
#
# A constant volumetric fission rate of 3.125e18 fissions/m^3-s is applied to a cube of length 1 cm.
# The power is thus constant with magnitude:
#
# Power = Fdot * Energy_per_fission * Volume
# = 3.125e18 * 3.2e-11 * 1.0e-6
# = 100
[Mesh]
[mesh]
type = FileMeshGenerator
file = cube_10mm.e
[]
[]
[Functions]
[unity]
type = ParsedFunction
expression = '1.0'
[]
[]
[Variables]
[T]
order = FIRST
family = LAGRANGE
initial_condition = 500.0
[]
[]
[AuxVariables]
[fission_rate]
order = FIRST
family = LAGRANGE
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = T
[]
[ie]
type = HeatConductionTimeDerivative
variable = T
[]
[heat_source]
type = NeutronHeatSource
variable = T
energy_per_fission = 3.2e-11
fission_rate = fission_rate
[]
[]
[AuxKernels]
[fissionrate]
type = FissionRateGeneral
fission_rate_formulation = GENERIC
variable = fission_rate
value = 3.125e18
fission_rate_function = unity
execute_on = 'initial timestep_begin'
[]
[]
[BCs]
[bottom_T]
type = DirichletBC
variable = T
boundary = 1
value = 500.0
[]
[top_T]
type = NeumannBC
variable = T
boundary = 2
value = 0.0
[]
[]
[Materials]
[fuel]
type = HeatConductionMaterial
block = 1
thermal_conductivity = 10
specific_heat = 100
[]
[density]
type = ParsedMaterial
block = 1
property_name = density
expression = 10000
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 2
dt = 1.0e7
[]
[Postprocessors]
[rod_total_power]
type = ElementIntegralPower
variable = T
fission_rate = fission_rate
block = 1
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = out
exodus = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_A/x441_1_5D_A.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM003/analysis/b14_ptm003_1D_sample2.i)
# Sample at +97mm from midplane
initial_fuel_density = 11172.82
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Problem]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.0027
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.1409
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 36350.6 36350.6 40436.1 40436.1 49235.7 49235.7 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1159.5'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1409
rod_ave_lin_pow = power_history
pellet_diameter = 0.0054
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.961
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(examples/mox_fuel/mox_porosity_demo.i)
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.1
pellet_outer_radius = 0.00541
include_clad = false
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
[]
[]
[Variables]
[temp]
initial_condition = 300
[]
[pore]
initial_condition = 0.15
scaling = 1e14
[]
[]
[AuxVariables]
[pore_speed_aux]
order = constant
family = monomial
[]
[fission_rate_aux_variable]
order = first
family = lagrange
[]
[fission_rate_aux_variable_mox]
order = first
family = lagrange
[]
[grad_temp_x]
order = CONSTANT
family = MONOMIAL
[]
[thermal_conductivity]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[]
[Functions]
[power_history1]
type = PiecewiseLinear
x = '0 10000'
y = '0 50000'
[]
[fuel_surface_temp]
type = PiecewiseLinear
data_file = fuel_surface_temp_bc.csv
scale_factor = 1
format = columns
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel (block 2) only
fission_rate = fission_rate_aux_variable_mox
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history1
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
# nu = 3.25e-8 #seems to be THE value to use... result is super sensitive to this number
# nu = 10e-10
nu = 1e-12
heating_function = power_history1
v_upper = 1e-12
v_lower = 1e-20
# v_upper = 1
# v_lower = 1
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate_aux_kernel]
type = FissionRateGeneral
fission_rate_formulation = LWR
variable = fission_rate_aux_variable
block = fuel
rod_ave_lin_pow = power_history1
# axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
pellet_diameter = 0.01082
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
value = 1.0
[]
[fission_rate_aux_kernel_mox]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate_aux_variable_mox
block = fuel
porosity = pore
initial_porosity = 0.15
rod_ave_lin_pow = power_history1
pellet_diameter = 0.01082
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
value = 1.0
[]
[grad_temp_x_aux]
type = VariableGradientComponent
variable = grad_temp_x
component = x
gradient_variable = temp
execute_on = 'initial timestep_end'
[]
[ThermalConductivityAux]
type = MaterialRealAux
block = fuel
execute_on = linear
property = thermal_conductivity
variable = thermal_conductivity
[]
[]
[BCs]
[temp_outside] # pin pellets and clad along axis of symmetry (y)
type = FunctionDirichletBC
variable = temp
boundary = 10
function = fuel_surface_temp
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
block = fuel
temperature = temp
porosity = pore
porosity_limit = 0.95
[]
[density_block]
type = GenericConstantMaterial
block = fuel
prop_names = density
prop_values = 10662.0
[]
[pore_velocity]
type = MOXPoreVelocity
block = fuel
temperature = temp
limit = 1e-3
#go back to this if necessary scale_factor = 0.05
scale_factor = 0.1
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temp
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
#petsc_options_iname = '-pc_type -pc_factor_mat_solver_package' # -mat_superlu_dist_fact'
#petsc_options_value = 'lu superlu_dist' # SamePattern_SameRowPerm'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-6
end_time = 10000
dtmax = 100
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history1
[]
[]
[Postprocessors]
[_dt] # time step
type = TimestepSize
[]
[z_nonlinear_its] # number of nonlinear iterations at each timestep
type = NumNonlinearIterations
[]
[a_run_time] # average temperature of cladding interior
type = PerfGraphData
section_name = Root
data_type = TOTAL
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temp
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[ave_fission_rate]
type = ElementAverageValue
block = fuel
variable = fission_rate_aux_variable
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
block = fuel
fission_rate = fission_rate_aux_variable
fuel_pin_geometry = pin_geometry
[]
[rod_total_power_mox]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
block = fuel
fission_rate = fission_rate_aux_variable_mox
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history1
scale_factor = 0.1 # rod height
[]
[ave_themal_conductivity]
type = ElementAverageValue
block = fuel
variable = thermal_conductivity
[] # end element average burnup
[]
#[VectorPostprocessors]
# [line_value_vector_postprocessor_pore]
# type = LineValueSampler
# variable = pore
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# control_tags = a
# []
# [line_value_vector_postprocessor_gradT]
# type = LineValueSampler
# variable = grad_temp_x
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_pore_speed]
# type = LineValueSampler
# variable = pore_speed_aux
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_temp]
# type = LineValueSampler
# variable = temp
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
#[]
[Outputs]
perf_graph = true
exodus = true
csv = false
color = false
[console]
type = Console
max_rows = 25
all_variable_norms = true
[]
#[stuff_v_rad]
# type = CSV
# execute_on = 'FINAL'
#[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample2.i)
# Sample at +97mm from midplane
initial_fuel_density = 11057.75
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.0027
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.1372
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 36350.63 36350.63 40436.15 40436.15 49235.72 49235.72 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1178'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1372
rod_ave_lin_pow = power_history
pellet_diameter = 0.0054
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.982
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_G/x441_1_5D_G.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/LWR/benchmark/FUMEXII_simplified_cases/analysis/27_1/vitanza_1pt5.i)
# Model is of a 10 slice pellet stack in 1.5D
initial_fuel_density = 10431.0
[GlobalParams]
density = ${initial_fuel_density}
order = SECOND
family = LAGRANGE
energy_per_fission = 3.20435313e-11 # J/fission (200 MeV)
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.005305
pellet_bottom_coor = 0.00226
fuel_height = 0.0127
include_clad = false
include_plenum = false
clad_gap_width = 0
clad_thickness = 0
slices_per_block = 10
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 293.0
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 7.5e-6
[]
[]
[Functions]
[power_profile]
type = PiecewiseLinear
x = '-100 0 100 1e8'
[]
[axial_peaking_factors]
type = ParsedFunction
expression = 1
[]
[q]
type = CompositeFunction
functions = 'power_profile axial_peaking_factors'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
burnup_function = burnup
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_profile
axial_power_profile = axial_peaking_factors
num_radial = 80
num_axial = 20
a_upper = 0.01496
a_lower = 0.00226
fuel_inner_radius = 0.0
fuel_outer_radius = 0.005305
fuel_volume_ratio = 1
RPF = RPF
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[]
[BCs]
[fuel_wall_temp]
type = DirichletBC
variable = temp
boundary = '10'
value = 673
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup_function = burnup
thermal_conductivity_model = NFIR
initial_porosity = 0.05
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
burnup_function = burnup
grain_radius = grain_radius
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 15
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
start_time = -100
dtmax = 1e6
dtmin = 1
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e2
optimal_iterations = 6
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
execute_on = linear
burnup_function = burnup
variable = temp
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_profile
scale_factor = 0.0127
[]
[ave_fission_rate]
type = ElementAverageValue
block = fuel
variable = fission_rate
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[fuel_center_temperature]
type = NodalVariableValue
nodeid = 165 # Paraview GlobalNodeID 166 at (0.0, 0.009245)
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = false
color = false
print_linear_residuals = true
[csv]
type = CSV
execute_on = final
[]
[chkfile]
type = CSV
show = 'burnup fis_gas_percent fuel_center_temperature rod_total_power'
execute_on = final
[]
[]
[UserObjects]
[terminator]
type = Terminator
expression = 'fis_gas_percent >= 0.01'
[]
[]
(test/tests/element_integral_power/element_integral_power_1D.i)
# Tests the ElementIntegralPower postprocessor
#
# A constant volumetric fission rate of 3.125e18 fissions/m^3-s is applied to a RZ cylinder
# having an inner radius of 0.01 m, outer radius of 0.0114818 m and height of 0.01 m.
# The power is thus constant with magnitude:
#
# Power = Fdot * Energy_per_fission * Volume
# = 3.125e18 * 3.2e-11 * Pi*(0.0114818^2 - 0.01^2) * 0.01
# = 100
[GlobalParams]
order = FIRST
family = LAGRANGE
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.01
include_clad = false
include_plenum = false
slices_per_block = 1
pellet_bottom_coor = 0
pellet_outer_radius = 0.011481768
pellet_inner_radius = 0.01
clad_gap_width = 0
clad_thickness = 0
elem_type = EDGE2
pellet_mesh_density = customize
nx_p = 1
[]
[]
[Functions]
[unity]
type = ParsedFunction
expression = '1.0'
[]
[]
[Variables]
[temp]
initial_condition = 500.0
[]
[]
[AuxVariables]
[fission_rate]
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
energy_per_fission = 3.2e-11
fission_rate = fission_rate
[]
[]
[AuxKernels]
[fissionrate]
type = FissionRateGeneral
fission_rate_formulation = GENERIC
variable = fission_rate
value = 3.125e18
fission_rate_function = unity
execute_on = 'initial timestep_begin'
[]
[]
[BCs]
[left_T]
type = DirichletBC
variable = temp
boundary = 13
value = 500.0
[]
[]
[Materials]
[fuel]
type = HeatConductionMaterial
block = fuel
thermal_conductivity = 10
specific_heat = 100
[]
[density]
type = ParsedMaterial
block = fuel
property_name = density
expression = 10000
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 2
dt = 1.0e6
nl_abs_tol = 1e-8
[]
[Postprocessors]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
fuel_pin_geometry = pin_geometry
variable = temp
fission_rate = fission_rate
block = fuel
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Outputs]
exodus = true
[]
(examples/1.5D_rodlet_10pellets/1_5D.i)
# Model is of a 10 pellet stack of fuel modeled in 1.5d
initial_fuel_density = 10431.0
[GlobalParams]
density = ${initial_fuel_density}
initial_porosity = 0.05
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = disp_x
temperature = temperature
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
[]
[Mesh]
# Specify coordinate system type
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
slices_per_block = 10
clad_gap_width = 8.0e-5
clad_thickness = 0.00056
fuel_height = 0.1186
plenum_height = 0.027
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temperature]
initial_condition = 580.0 # set initial temperature to coolant inlet
[]
[]
[AuxVariables]
[disp_y] ## Required for easier visualization in Paraview
[]
[disp_z] ## Required for easier visualization in Paraview
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[grain_radius]
block = fuel
initial_condition = 10e-6
[]
[creep_strain_rate]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[solid_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[gas_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[densification]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[volumetric_swelling_strain]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[relocation]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads and interpolates an input file containing rod average linear power vs time
data_file = powerhistory.csv
scale_factor = 1
[]
[axial_peaking_factors] # reads and interpolates an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = peakingfactors.csv
scale_factor = 1
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp] # reads and interpolates input data defining amplitude curve for fill gas pressure
type = PiecewiseLinear
x = '-200 0'
y = '0 1'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.5e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel (block 2) only
burnup_function = burnup
extra_vector_tags = 'ref'
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
block = fuel
add_variables = true
strain = FINITE
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
eigenstrain_names = 'fuelthermal_strain swelling_strain fuel_relocation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
outputs = none
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
[]
[clad]
block = clad
add_variables = true
strain = FINITE
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
outputs = none
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
num_radial = 80
num_axial = 11
order = CONSTANT
family = MONOMIAL
fuel_pin_geometry = pin_geometry
fuel_volume_ratio = 1.0 # for use with dished pellets (ratio of actual volume to cylinder volume)
RPF = RPF
[]
[]
[AuxKernels]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
factor = 3e13
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[grain_radius]
type = GrainRadiusAux
block = fuel
variable = grain_radius
temperature = temperature
execute_on = linear
[]
[creep_strain]
type = MaterialRealAux
property = effective_creep_strain
variable = creep_strain
block = clad
execute_on = timestep_end
[]
[creep_strain_rate]
type = MaterialRealAux
property = creep_rate
variable = creep_strain_rate
block = clad
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
block = fuel
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
block = fuel
[]
[densification]
type = MaterialRealAux
variable = densification
property = densification
execute_on = timestep_end
block = fuel
[]
[volumetric_swelling_strain]
type = MaterialRealAux
variable = volumetric_swelling_strain
property = volumetric_swelling_strain
execute_on = timestep_end
block = fuel
[]
[relocation_strain]
type = MaterialRealAux
variable = relocation
property = relocation_strain
execute_on = timestep_end
block = fuel
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
formulation = kinematic
model = frictionless
penalty = 1e7
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
variable = temperature
primary = 5
secondary = 10
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
contact_pressure = contact_pressure
quadrature = true
[]
[]
[BCs]
[no_x_all] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure] # apply coolant pressure on clad outer walls
[coolantPressure]
boundary = 2
function = pressure_ramp # use the pressure_ramp function defined above
factor = 15.5e6
[]
[]
[PlenumPressure] # apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.0e6
startup_time = 0
R = 8.314
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior # coupling to post processor to get gas temperature approximation
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
[]
[]
[]
[CoolantChannel]
[convective_clad_surface] # apply convective boundary to clad outer surface
variable = temperature
boundary = 2
inlet_temperature = 580 # K
inlet_pressure = 15.5e6 # Pa
inlet_massflux = 3800 # kg/m^2-sec
rod_diameter = 0.948e-2 # m
rod_pitch = 1.26e-2 # m
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
thermal_conductivity_model = NFIR
temperature = temperature
burnup_function = burnup
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_strain]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 295.0
eigenstrain_name = fuelthermal_strain
[]
[fuel_swelling]
type = UO2VolumetricSwellingEigenstrain
block = fuel
gas_swelling_model_type = SIFGRS
burnup_function = burnup
initial_fuel_density = 10431.0
eigenstrain_name = swelling_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup_function = burnup
fuel_pin_geometry = pin_geometry
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
relocation_activation1 = 5000.0
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temperature
burnup_function = burnup
gbs_model = true
grain_radius = grain_radius
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
block = clad
tangent_operator = elastic
inelastic_models = 'zrycreep'
[]
[zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[clad_thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[limitX]
type = MaxIncrement
max_increment = 1e-5
variable = disp_x
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-7
start_time = -200
n_startup_steps = 1
end_time = 8.0e7
dtmax = 2e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 8
iteration_window = 2
growth_factor = 2
cutback_factor = .5
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temperature
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
# scale_factor = -1
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temperature
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[fis_gas_produced] # fission gas produced (moles)
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released] # fission gas released to plenum (moles)
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fission_gas_release]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[_dt] # time step
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[alive_time]
type = PerfGraphData
section_name = Root
data_type = TOTAL
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
burnup_function = burnup
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.1186 # rod height
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temperature
[]
[central_fuel_temp]
type = NodalVariableValue
nodeid = 262 #Mesh dependent (0.0041, 0.05661)
variable = temperature
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temperature
[]
### Comparisons for 1.5D work, mesh specific #################### # von Mises Stress
[top_vonMises_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = vonmises_stress
[]
[center_vonMises_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = vonmises_stress
[]
[bottom_vonMises_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = vonmises_stress
[]
[average_vonMises_fuel]
type = ElementAverageValue
variable = vonmises_stress
block = fuel
[]
[top_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = vonmises_stress
[]
[top_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = vonmises_stress
[]
[center_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = vonmises_stress
[]
[center_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = vonmises_stress
[]
[bottom_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = vonmises_stress
[]
[bottom_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = vonmises_stress
[]
[average_vonMises_clad]
type = ElementAverageValue
variable = vonmises_stress
block = clad
[]
# radial stress
[top_stress_rr_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = stress_xx
[]
[center_stress_rr_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = stress_xx
[]
[bottom_stress_rr_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = stress_xx
[]
[average_stress_rr_fuel]
type = ElementAverageValue
variable = stress_xx
block = fuel
[]
[top_stress_rr_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = stress_xx
[]
[top_stress_rr_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = stress_xx
[]
[center_stress_rr_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = stress_xx
[]
[center_stress_rr_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = stress_xx
[]
[bottom_stress_rr_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = stress_xx
[]
[bottom_stress_rr_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = stress_xx
[]
[average_stress_rr_clad]
type = ElementAverageValue
variable = stress_xx
block = clad
[]
# radial strain
[top_strain_rr_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = strain_xx
[]
[center_strain_rr_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = strain_xx
[]
[bottom_strain_rr_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = strain_xx
[]
[average_strain_rr_fuel]
type = ElementAverageValue
variable = strain_xx
block = fuel
[]
[top_strain_rr_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = strain_xx
[]
[top_strain_rr_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = strain_xx
[]
[center_strain_rr_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = strain_xx
[]
[center_strain_rr_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = strain_xx
[]
[bottom_strain_rr_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = strain_xx
[]
[bottom_strain_rr_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = strain_xx
[]
[average_strain_rr_clad]
type = ElementAverageValue
variable = strain_xx
block = clad
[]
# effective creep strain
[top_creep_strain_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = creep_strain
[]
[top_creep_strain_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = creep_strain
[]
[center_creep_strain_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = creep_strain
[]
[center_creep_strain_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = creep_strain
[]
[bottom_creep_strain_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = creep_strain
[]
[bottom_creep_strain_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = creep_strain
[]
[average_creep_strain_clad]
type = ElementAverageValue
variable = creep_strain
block = clad
[]
### Nodal displacements
[top_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
[top_disp_r_clad_inner]
type = NodalVariableValue
variable = disp_x
nodeid = 63 #mesh dependent, at (0.00418, 0.09219)
[]
[top_disp_r_clad_outer]
type = NodalVariableValue
variable = disp_x
nodeid = 68 #mesh dependent, at (0.00474, 0.09219)
[]
[center_disp_r_clad_inner]
type = NodalVariableValue
variable = disp_x
nodeid = 36 #mesh dependent, at (0.00418, 0.05661)
[]
[center_disp_r_clad_outer]
type = NodalVariableValue
variable = disp_x
nodeid = 43 #mesh dependent, at (0.00474, 0.05661)
[]
[bottom_disp_r_clad_inner]
type = NodalVariableValue
variable = disp_x
nodeid = 9 #mesh dependent, at (0.00418, 0.02103)
[]
[bottom_disp_r_clad_outer]
type = NodalVariableValue
variable = disp_x
nodeid = 16 #mesh dependent, at (0.00418, 0.02103)
[]
### Nodal temperatures
[top_temp_fuel]
type = NodalVariableValue
variable = temperature
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_temp_fuel]
type = NodalVariableValue
variable = temperature
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_temp_fuel]
type = NodalVariableValue
variable = temperature
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
[top_temp_clad_inner]
type = NodalVariableValue
variable = temperature
nodeid = 63 #mesh dependent, at (0.00418, 0.09219)
[]
[top_temp_clad_outer]
type = NodalVariableValue
variable = temperature
nodeid = 68 #mesh dependent, at (0.00474, 0.09219)
[]
[center_temp_clad_inner]
type = NodalVariableValue
variable = temperature
nodeid = 36 #mesh dependent, at (0.00418, 0.05661)
[]
[center_temp_clad_outer]
type = NodalVariableValue
variable = temperature
nodeid = 43 #mesh dependent, at (0.00474, 0.05661)
[]
[bottom_temp_clad_inner]
type = NodalVariableValue
variable = temperature
nodeid = 9 #mesh dependent, at (0.00418, 0.02103)
[]
[bottom_temp_clad_outer]
type = NodalVariableValue
variable = temperature
nodeid = 16 #mesh dependent, at (0.00418, 0.02103)
[]
### Nodal penetration
[top_penetration_fuel]
type = NodalVariableValue
variable = penetration
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_penetration_fuel]
type = NodalVariableValue
variable = penetration
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_penetration_fuel]
type = NodalVariableValue
variable = penetration
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
### Nodal contact pressure
[top_contact_pressure_fuel]
type = NodalVariableValue
variable = contact_pressure
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_contact_pressure_fuel]
type = NodalVariableValue
variable = contact_pressure
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_contact_pressure_fuel]
type = NodalVariableValue
variable = contact_pressure
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
### End of 1.5D comparisons
[center_effective_creep_rate_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent
variable = creep_strain_rate
[]
[center_effective_creep_rate_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent
variable = creep_strain_rate
[]
[effective_creep_strain_rate]
type = ElementAverageValue
variable = creep_strain_rate
block = clad
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[densification]
type = ElementAverageValue
variable = densification
block = fuel
[]
[volumetric_swelling]
type = ElementAverageValue
variable = volumetric_swelling_strain
block = fuel
[]
[relocation]
type = ElementAverageValue
variable = relocation
block = fuel
[]
[]
[VectorPostprocessors]
[clad]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'clad_radial_displacement'
[]
[pellet]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'fuel_radial_displacement'
[]
[]
[Outputs]
perf_graph = true
exodus = true
csv = true
color = false
[clad_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[]
(assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/TSQ002_1pt5.i)
# Model is of a 10 slice pellet stack in 1.5D
# Top plenum height of 295.07 mm + bot_gap_height = 1.e-3 in 2D mesh
initial_fuel_density = 10431
[GlobalParams]
density = ${initial_fuel_density} #95% of TD (TD assumed to be 10980)
displacements = disp_x
temperature = temp
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = false
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.0041275
clad_gap_width = 8.89e-5
clad_thickness = 6.35e-4
fuel_height = 3.81381
plenum_height = 0.29607
slices_per_block = 10
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 300.0 # set initial temp to ambient
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 8.7945e-6 # ((11.6+11.2+11.2+11.1)/4)/2*1.56
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads an input file containing rod average linear power vs time
data_file = TSQ002_alhr.csv
format = columns
[]
[axial_peaking_factors]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_alhr_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp]
# reads an input data defining amplitude curve for coolant pressure
type = PiecewiseLinear
x = '-100 0 141798626 141802226' # -100 @ 101326 Pa, 0 to 141798626 @ 15.517 MPa, 141802226 @ 101326 Pa
y = '.00653 1 1 .00653'
[]
[flux]
type = PiecewiseLinear
data_file = TSQ002_fast_flux.csv
format = columns
[]
[clad_wall_temp]
type = PiecewiseLinear
data_file = TSQ002_clad_temp.csv
format = columns
[]
[axial_clad_peaking]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_clad_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[clad_bc]
type = CompositeFunction
functions = 'clad_wall_temp axial_clad_peaking'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.517e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie]
# time term in heat cnduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
# source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate # coupling to the fission_rate aux variable
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain
fuel_volumetric_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress
hydrostatic_stress strain_xx strain_yy strain_zz'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress
strain_xx strain_yy strain_zz creep_strain_xx creep_strain_xy
creep_strain_yy creep_strain_zz'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
a_lower = 0.00324 # checked with paraview
a_upper = 3.81705 # checked with paraview
fuel_outer_radius = .0041275 # checked with paraview
fuel_volume_ratio = 1.0
isotopes = 'U235 U238 Pu239 Pu240 Pu241 Pu242'
isotope_fractions = '0.0348 0.9652 0 0 0 0'
RPF = RPF
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
function = flux
factor = 1
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5 # clad
secondary = 10 # fuel
formulation = kinematic # #changed to match 1.5d example problem
penalty = 1e7 #changed to match 1.5D example problem to 1e7 from 1e9
model = frictionless
#normal_smoothing_distance = 0.1 # This option does not play nicely with 1.5D
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
secondary = 10 # fuel
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
primary = 5 # clad
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
variable = temp
tangential_tolerance = 1e-6
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
quadrature = true
#normal_smoothing_distance = 0.1 # This option does not play nicely with 1.5D
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[clad_surface_temperature]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = clad_bc
[]
[Pressure]
# apply coolant pressure on clad outer walls
[coolantPressure]
boundary = '2'
factor = 15.517e6
function = pressure_ramp # use the pressure_ramp function defined above
displacements = 'disp_x'
[]
[]
[PlenumPressure]
# apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.62e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup = burnup
thermal_conductivity_model = NFIR
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
diameter = 0.008255
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
diametral_gap = 0.0001778 #diameteral gap
relocation_activation1 = 5000
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup = burnup
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
fission_rate = fission_rate #fission_rate
grain_radius = grain_radius
initial_porosity = 0.05
burnup = burnup
gbs_model = true
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 300.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 20.0
variable = temp
[]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
line_search = 'none'
# controls for linear iterations
l_max_its = 100
l_tol = 1e-3
# controls for nonlinear iterations
nl_max_its = 100
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
# time control
start_time = -100
end_time = 141802226 #141798626+3600
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
iteration_window = 2
optimal_iterations = 10
[]
[Quadrature]
order = fifth
side_order = seventh
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[avg_clad_temp]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
execute_on = 'initial timestep_end'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = NodalExtremeValue
block = clad
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.81381 # rod height
[]
[average_fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[FCT]
type = NodalVariableValue
nodeid = 264 #coords (0.0, 2.10084)
variable = temp
execute_on = 'initial timestep_end'
[]
[FCT_slice4]
type = NodalVariableValue
nodeid = 231 #coords (0.0, 1.71945)
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
## Nodal comparison values
[gap_slice6]
type = NodalVariableValue
variable = penetration
nodeid = 328 #coords (0.0041275, 2.48222)
[]
[gap]
type = NodalVariableValue
variable = penetration
nodeid = 295 #coords (0.0041275, 2.10084)
[]
[gap_slice4]
type = NodalVariableValue
variable = penetration
nodeid = 262 #coords (0.0041275, 1.71945)
[]
[contact_pressure_slice6]
type = NodalVariableValue
variable = contact_pressure
nodeid = 328 #coords (0.0041275, 2.48222)
[]
[contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 295 #coords (0.0041275, 2.10084)
[]
[contact_pressure_slice4]
type = NodalVariableValue
variable = contact_pressure
nodeid = 262 #coords (0.0041275, 1.71945)
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[chkfile]
type = CSV
show = 'average_burnup fis_gas_percent FCT rod_total_power'
execute_on = 'FINAL'
[]
[console]
type = Console
max_rows = 25
[]
[]
(assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_twentyslice.i)
# Model is of a 20 slice pellet stack in 1.5D
# Top plenum height of 295.07 mm + bot_gap_height = 1.e-3 in 2D mesh
initial_fuel_density = 10431
[GlobalParams]
density = ${initial_fuel_density} #95% of TD (TD assumed to be 10980)
displacements = disp_x
temperature = temp
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = false
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.0041275
clad_gap_width = 8.89e-5
clad_thickness = 6.35e-4
fuel_height = 3.81381
plenum_height = 0.29607
slices_per_block = 20
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 300.0 # set initial temp to ambient
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 8.7945e-6 # ((11.6+11.2+11.2+11.1)/4)/2*1.56
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[vonmises_stress]
order = CONSTANT
family = MONOMIAL
[]
[hydrostatic_stress]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain_xx]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_xy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_yy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_zz]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads an input file containing rod average linear power vs time
data_file = TSQ002_alhr.csv
format = columns
[]
[axial_peaking_factors]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_alhr_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp]
# reads an input data defining amplitude curve for coolant pressure
type = PiecewiseLinear
x = '-100 0 141798626 141802226' # -100 @ 101326 Pa, 0 to 141798626 @ 15.517 MPa, 141802226 @ 101326 Pa
y = '.00653 1 1 .00653'
[]
[flux]
type = PiecewiseLinear
data_file = TSQ002_fast_flux.csv
format = columns
[]
[clad_wall_temp]
type = PiecewiseLinear
data_file = TSQ002_clad_temp.csv
format = columns
[]
[axial_clad_peaking]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_clad_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[clad_bc]
type = CompositeFunction
functions = 'clad_wall_temp axial_clad_peaking'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.517e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie]
# time term in heat cnduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
# source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate # coupling to the fission_rate aux variable
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain fuel_volumetric_strain'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
fuel_pin_geometry = pin_geometry
isotopes = 'U235 U238 Pu239 Pu240 Pu241 Pu242'
isotope_fractions = '0.0348 0.9652 0 0 0 0'
fuel_volume_ratio = 1.0
RPF = RPF
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
function = flux
factor = 1
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[stress_xx] # computes stress components for output
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises_stress
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[hydrostatic_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = hydrostatic_stress
scalar_type = VonMisesStress
execute_on = timestep_end
block = fuel
[]
[strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
block = clad
execute_on = timestep_end
[]
[creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_zz]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_zz
index_i = 2
index_j = 2
block = clad
execute_on = timestep_end
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5 # clad
secondary = 10 # fuel
formulation = kinematic
penalty = 1e7
model = frictionless
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
secondary = 10 # fuel
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
primary = 5 # clad
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
variable = temp
tangential_tolerance = 1e-6
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
quadrature = true
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[clad_surface_temperature]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = clad_bc
[]
[Pressure]
# apply coolant pressure on clad outer walls
[coolantPressure]
boundary = '2'
factor = 15.517e6
function = pressure_ramp # use the pressure_ramp function defined above
displacements = 'disp_x'
[]
[]
[PlenumPressure]
# apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.62e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup = burnup
thermal_conductivity_model = NFIR
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
fuel_pin_geometry = pin_geometry
relocation_activation1 = 5000
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
temperature = temp
burnup = burnup
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
fission_rate = fission_rate
grain_radius = grain_radius
initial_porosity = 0.05
burnup = burnup
gbs_model = true
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 7.5e10
poissons_ratio = 0.3
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 300.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 20.0
variable = temp
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu'
line_search = 'none'
# controls for linear iterations
l_max_its = 100
l_tol = 1e-4 #8e-3
# controls for nonlinear iterations
nl_max_its = 50
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
# time control
start_time = -100
end_time = 141802226 #141798626+3600
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
iteration_window = 2
optimal_iterations = 10
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[Quadrature]
order = fifth
side_order = seventh
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[avg_clad_temp]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
execute_on = 'initial timestep_end'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = NodalExtremeValue
block = clad
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.81 # rod height
[]
[average_fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[FCT]
type = NodalVariableValue
variable = temp
nodeid = 231 # Global node id 232, at coordinates (0.0, 1.71774, 0.0)
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[max_penetration]
type = NodalExtremeValue
block = fuel
value_type = max
variable = penetration
[]
[min_penetration]
type = NodalExtremeValue
block = fuel
value_type = min
variable = penetration
[]
[max_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = max
variable = contact_pressure
[]
[min_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = min
variable = contact_pressure
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
## Nodal comparison values
[top_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 847 #coords (0.0041275, 3.62274)
[]
[top_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 153 #coords (0.0042164, 3.62274)
[]
[plenum_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 180 #coords (0.0042164, 3.96053)
[]
[top_radial_strain_fuel]
type = ElementalVariableValue
variable = strain_xx
elementid = 403
[]
[top_axial_strain_fuel]
type = ElementalVariableValue
elementid = 403
variable = strain_yy
[]
[top_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 72
[]
[top_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 72
[]
[plenum_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 80
[]
[plenum_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 80
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[pellet_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 10
# sort_by = y
# outputs = 'outfile_fuel_surface_temp'
#[]
#[pellet_center_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 12
# sort_by = y
# outputs = 'outfile_FCT'
#[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[outfile_fuel_surface_temp]
# type = CSV
# execute_on = linear
#[]
#[outfile_FCT]
# type = CSV
# execute_on = linear
#[]
[console]
type = Console
max_rows = 25
[]
[]
(examples/accident_tolerant_fuel/u3si2_sic/u3si2_outer_monolith_1.5D.i)
# Model is of a 10 pellet fuel rodlet modeled in 1.5D. The rodlet contains
# U3Si2 fuel and a multilayer silicon carbide cladding (an inner composite
# winding layer) and an outer monolithic layer. The inner composite layer is
# 0.75 mm thick and the outer monolithic layer is 0.25 mm thick. The internal
# layered1D mesh generator can model a clad an arbitrary number of additional blocks.
# Therefore, to create the multilayer SiC clad the composite layer is assigned to the
# clad block and the monolithic_layer is assigned to the monolithic_layer block
# as specified in the additional_block_names parameter in the Mesh block.
initial_fuel_density = 11590.0
[GlobalParams]
density = ${initial_fuel_density}
initial_porosity = 0.05
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = disp_x
temperature = temperature
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
slices_per_block = 10
clad_gap_width = 8.0e-5
clad_mesh_density = customize
clad_thickness = 0.00075
nx_c = 5
additional_block_names = 'monolithic_layer'
additional_elements_per_ring = '3'
additional_ring_thicknesses = '0.00025'
fuel_height = 0.1186
plenum_height = 0.027
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temperature]
initial_condition = 580.0 # set initial temperature to coolant inlet
[]
[]
[AuxVariables]
[disp_y] ## Required for easier visualization in Paraview
[]
[disp_z] ## Required for easier visualization in Paraview
[]
[fast_neutron_flux]
block = 'clad monolithic_layer'
order = CONSTANT
family = MONOMIAL
[]
[fast_neutron_fluence]
block = 'clad monolithic_layer'
order = CONSTANT
family = MONOMIAL
[]
[grain_radius]
block = fuel
initial_condition = 10e-6
[]
[solid_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[gaseous_swelling]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[densification]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[volumetric_swelling_strain]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[relocation]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e4 1e8'
y = '0 25000 25000'
scale_factor = 1
[]
[axial_peaking_factors]
type = ParsedFunction
expression = 1
[]
[pressure_ramp]
type = PiecewiseLinear
x = '-200 0 1e8'
y = '6.537e-3 1 1'
[]
[q]
type = CompositeFunction
functions = 'power_history axial_peaking_factors'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.5e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_source]
type = NeutronHeatSource
variable = temperature
block = fuel
burnup_function = burnup
extra_vector_tags = 'ref'
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
block = fuel
add_variables = true
strain = SMALL
incremental = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
eigenstrain_names = 'fuel_thermal_strain fuel_swelling_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
[]
[composite]
block = clad
add_variables = true
strain = SMALL
incremental = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
eigenstrain_names = 'composite_thermal_strain composite_swelling_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
[]
[monolith]
block = monolithic_layer
add_variables = true
strain = SMALL
incremental = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
eigenstrain_names = 'monolith_thermal_strain monolith_swelling_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
num_radial = 80
num_axial = 11
order = CONSTANT
family = MONOMIAL
fuel_pin_geometry = pin_geometry
fuel_volume_ratio = 1.0
RPF = RPF
fuel_type = U3Si2
[]
[]
[AuxKernels]
[fast_neutron_flux]
type = MaterialRealAux
variable = fast_neutron_flux
property = fast_neutron_flux
block = 'clad monolithic_layer'
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = MaterialRealAux
variable = fast_neutron_fluence
property = fast_neutron_fluence
block = 'clad monolithic_layer'
execute_on = timestep_begin
[]
[grain_radius]
type = GrainRadiusAux
block = fuel
variable = grain_radius
temperature = temperature
execute_on = linear
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
block = fuel
[]
[gas_swell]
type = MaterialRealAux
variable = gaseous_swelling
property = gaseous_swelling
execute_on = timestep_end
block = fuel
[]
[densification]
type = MaterialRealAux
variable = densification
property = densification
execute_on = timestep_end
block = fuel
[]
[volumetric_swelling_strain]
type = MaterialRealAux
variable = volumetric_swelling_strain
property = volumetric_swelling_strain
execute_on = timestep_end
block = fuel
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
formulation = kinematic
model = frictionless
penalty = 1e7
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
variable = temperature
primary = 5
secondary = 10
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
contact_pressure = contact_pressure
[]
[]
[BCs]
[no_x_all] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure] # apply coolant pressure on clad outer walls
[coolantPressure]
use_displaced_mesh = false
boundary = 2
function = pressure_ramp # use the pressure_ramp function defined above
factor = 15.5e6
[]
[]
[PlenumPressure] # apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
use_displaced_mesh = false
boundary = 9
initial_pressure = 2.0e6
startup_time = 0
R = 8.314
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior # coupling to post processor to get gas temperature approximation
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
[]
[]
[]
[CoolantChannel]
[convective_clad_surface] # apply convective boundary to clad outer surface
variable = temperature
boundary = 2
inlet_temperature = 580 # K
inlet_pressure = 15.5e6 # Pa
inlet_massflux = 3800 # kg/m^2-sec
rod_diameter = 10.368e-3 # m
rod_pitch = 1.26e-2 # m
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
[]
[]
[Materials]
[flux]
type = FastNeutronFlux
calculate_fluence = true
block = 'clad monolithic_layer'
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
factor = 3e13
[]
### U3Si2 Fuel
[fuel_thermal]
type = SilicideFuelThermal
block = fuel
thermal_conductivity_model = WHITE
temperature = temperature
[]
[fuel_elasticity_tensor]
type = U3Si2ElasticityTensor
block = fuel
[]
[fuel_stress]
type = ComputeMultipleInelasticStress
block = fuel
tangent_operator = elastic
inelastic_models = 'fuel_creep'
[]
[fuel_creep]
type = U3Si2CreepUpdate
block = fuel
temperature = temperature
[]
[fuel_thermal_expansion]
type = U3Si2ThermalExpansionEigenstrain
block = fuel
temperature = temperature
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_volumetric_swelling]
type = U3Si2VolumetricSwellingEigenstrain
block = fuel
gaseous_swelling_type = FINLAY
temperature = temperature
burnup_function = burnup
eigenstrain_name = fuel_swelling_strain
[]
[fission_gas_release]
type = U3Si2Sifgrs
block = fuel
temperature = temperature
burnup_function = burnup
grain_radius_const = 2.5e-05
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
### Composite SiC
[composite_thermal]
type = CompositeSiCThermal
thermal_conductivity_model = STONE
temperature = temperature
block = clad
[]
[composite_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 2700.0
[]
[composite_elasticity_tensor]
type = CompositeSiCElasticityTensor
block = clad
[]
[composite_stress]
type = ComputeStrainIncrementBasedStress
block = clad
[]
[composite_thermal_expansion]
type = CompositeSiCThermalExpansionEigenstrain
block = clad
stress_free_temperature = 295.0
temperature = temperature
eigenstrain_name = composite_thermal_strain
[]
[composite_irradiation_swelling]
type = CompositeSiCVolumetricSwellingEigenstrain
block = clad
temperature = temperature
fast_neutron_fluence = fast_neutron_fluence
swelling_model = KATOH
number_of_substeps = 1000
eigenstrain_name = composite_swelling_strain
[]
### Monolithic SiC
[monolith_thermal]
type = MonolithicSiCThermal
temperature = temperature
thermal_conductivity_model = STONE
block = monolithic_layer
[]
[monolith_density]
type = StrainAdjustedDensity
block = monolithic_layer
strain_free_density = 3120.0
[]
[monolith_elasticity_tensor]
type = MonolithicSiCElasticityTensor
block = monolithic_layer
[]
[monolith_stress]
type = ComputeMultipleInelasticStress
block = monolithic_layer
tangent_operator = elastic
inelastic_models = 'monolith_creep'
[]
[monolith_creep]
type = MonolithicSiCCreepUpdate
block = monolithic_layer
fast_neutron_flux = fast_neutron_flux
temperature = temperature
k_function = 2e-37
[]
[monolith_thermal_expansion]
type = MonolithicSiCThermalExpansionEigenstrain
block = monolithic_layer
stress_free_temperature = 295.0
temperature = temperature
eigenstrain_name = monolith_thermal_strain
[]
[monolith_irradiation_swelling]
type = CompositeSiCVolumetricSwellingEigenstrain
block = monolithic_layer
temperature = temperature
fast_neutron_fluence = fast_neutron_fluence
swelling_model = KATOH
number_of_substeps = 1000
eigenstrain_name = monolith_swelling_strain
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[limitX]
type = MaxIncrement
max_increment = 1e-5
variable = disp_x
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-4
nl_abs_tol = 1e-7
start_time = -200
n_startup_steps = 1
end_time = 8.0e7
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 25
iteration_window = 5
growth_factor = 2
cutback_factor = .5
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temperature
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temperature
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[fis_gas_produced] # fission gas produced (moles)
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released] # fission gas released to plenum (moles)
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fission_gas_release]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[_dt] # time step
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[alive_time]
type = PerfGraphData
section_name = Root
data_type = TOTAL
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
burnup_function = burnup
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.1186 # rod height
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gaseous_swelling]
type = ElementAverageValue
variable = gaseous_swelling
block = fuel
[]
[densification]
type = ElementAverageValue
variable = densification
block = fuel
[]
[volumetric_swelling]
type = ElementAverageValue
variable = volumetric_swelling_strain
block = fuel
[]
[]
[Outputs]
perf_graph = true
exodus = true
csv = true
color = false
[]
(assessment/LWR/validation/Riso_GE7_ZX115/analysis/Riso_GE7_1pt5.i)
[GlobalParams]
displacements = 'disp_x'
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11
volumetric_locking_correction = false
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.005205
clad_gap_width = 110.0e-6
clad_thickness = 8.15e-4
fuel_height = 0.74952
plenum_height = 0.15665 # Add volume from below the pellet stack = 0.01494 - 0.00224 = 0.0127
# Nominal plenum height = 0.14395 + 0.0127 = 0.15665
slices_per_block = 10
[]
patch_update_strategy = iteration
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temperature]
initial_condition = 293.0 # set initial temperature to ambient
scaling = 1e3
[]
[]
[AuxVariables]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[grain_radius]
block = fuel
initial_condition = 9.4e-6 # from Riso GE7 report, Table 2-1, R = 1.56*l/2, l is 2D average size, Mendelson, J.Am.Cerm.Soc.(1969) eqn 13
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads and interpolates an input file containing rod average linear power vs time
data_file = riso_ge7_zx115_linear_power.csv
scale_factor = 1
format = columns
[]
[axial_peaking_factors] # reads and interpolates an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = riso_ge7_zx115_peaking_factors.csv
scale_factor = 1
axis = 1
[]
[pressure_ramp] # reads and interpolates input data defining amplitude curve for coolant and fill gas pressure
type = PiecewiseLinear
x = '-100 0 161748936 161756676 161813271 161814651'
y = '.013995 1 1 .994475 .994475 .013995'
[]
[clad_wall_temperature]
type = PiecewiseLinear
data_file = riso_ge7_zx115_clad_temperature.csv
format = columns
[]
[fast_neutron_flux_function]
type = PiecewiseLinear
data_file = riso_ge7_zx115_fast_flux.csv
format = columns
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 7.24e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain
fuel_volumetric_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress
hydrostatic_stress strain_xx strain_xy strain_yy strain_zz'
mesh_generator = layered1D_mesh
extra_vector_tags = 'ref'
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress
strain_xx strain_xy strain_yy strain_zz creep_strain_xx creep_strain_xy
creep_strain_yy creep_strain_zz'
mesh_generator = layered1D_mesh
extra_vector_tags = 'ref'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_source]
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate
extra_vector_tags = 'ref'
[]
[]
[Burnup]
[burnup]
block = fuel
density = 10431.0
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
num_radial = 80
num_axial = 11
a_upper = 0.76446
a_lower = 0.01494
fuel_inner_radius = 0
fuel_outer_radius = 0.005205
fuel_volume_ratio = 1.0
RPF = RPF
[]
[]
[AuxKernels]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
factor = 1
function = fast_neutron_flux_function
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[grain_radius]
type = GrainRadiusAux
block = fuel
variable = grain_radius
temperature = temperature
execute_on = linear
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
# Define mechanical contact between the fuel (sideset=10) and the clad (sideset=5)
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e14
formulation = penalty
normalize_penalty = true
model = frictionless
[]
[]
# Define thermal contact between the fuel (sideset=10) and the clad (sideset=5)
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
variable = temperature
primary = 5
secondary = 10
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
jump_distance_model = LANNING
quadrature = true
# normal_smoothing_distance = 0.1 # This option is not applicable in 1.5D
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[temperature]
type = FunctionDirichletBC
variable = temperature
boundary = 2
function = clad_wall_temperature
[]
[Pressure]
[coolantPressure]
boundary = 2
factor = 7.24e6
function = pressure_ramp # use the pressure_ramp function defined above
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.29e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior # coupling to post processor to get gas temperature approximation
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temperature
burnup = burnup
thermal_conductivity_model = NFIR
initial_porosity = 0.05
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
temperature = temperature
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 293.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
diameter = 0.01041 # fuel pellet diameter in meters
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
diametral_gap = 220.e-6
relocation_activation1 = 5000
burnup_relocation_stop = 0.03 # turn off relocation just before contact
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup = burnup
temperature = temperature
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
temp = temperature
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[fuel_density]
type = StrainAdjustedDensity
strain_free_density = 10431.0
block = fuel
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
temperature = temperature
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
temperature = temperature
stress_free_temperature = 293.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temperature
fission_rate = fission_rate
grain_radius = grain_radius
gbs_model = true
[]
[]
[Dampers]
[limitT]
type = BoundingValueNodalDamper
max_value = 3200
min_value = 200
variable = temperature
[]
[]
[Executioner]
type = Transient
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
line_search = 'none'
verbose = true
l_max_its = 40
l_tol = 1e-4
nl_max_its = 100
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
start_time = -100
# end_time = 161756676 # End of base irradiation
end_time = 161814651 # Whole power history, rounded to dtmin
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
optimal_iterations = 12
iteration_window = 2
linear_iteration_ratio = 100
[]
[Quadrature]
side_order = FIFTH
order = SEVENTH
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temperature
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[average_centerline_fuel_temperature]
type = LayeredAxisymmetricCenterlineAverageValuePostprocessor
boundary = 12
variable = temperature
execute_on = 'timestep_end'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temperature
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[max_fuel_temperature]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
execute_on = 'initial timestep_end'
[]
[min_fuel_temperature]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temperature
execute_on = 'initial timestep_end'
[]
[max_clad_temperature]
type = NodalExtremeValue
block = clad
value_type = max
variable = temperature
execute_on = 'initial timestep_end'
[]
[min_clad_temperature]
type = NodalExtremeValue
block = clad
value_type = min
variable = temperature
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume] # gas volume
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[average_fission_rate]
type = ElementAverageValue
block = fuel
variable = fission_rate
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.74952 # rod height
[]
[rod_ave_lin_pow]
type = LayeredElementIntegralPowerPostprocessor
block = fuel
fission_rate = fission_rate
variable = temperature
fuel_pin_geometry = pin_geometry
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[max_penetration]
type = NodalExtremeValue
block = fuel
value_type = max
variable = penetration
execute_on = 'initial timestep_end'
[]
[min_penetration]
type = NodalExtremeValue
block = fuel
value_type = min
variable = penetration
execute_on = 'initial timestep_end'
[]
[max_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = max
variable = contact_pressure
[]
[min_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = min
variable = contact_pressure
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
# Nodal comparisons
[contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 262 #coords (0.005205, 0.340524)
use_displaced_mesh = true
[]
[penetration]
type = NodalVariableValue
variable = penetration
nodeid = 262 #coords (0.005205, 0.340524)
use_displaced_mesh = true
[]
[FCT]
type = NodalVariableValue
variable = temperature
nodeid = 231 #coords (0.0, 0.340524) Glb node id 232
execute_on = 'initial timestep_end'
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
sync_times = '161756676 161760846 161765136 161765976 161767595.9 161767655.9 161767716.1 161767775.9 161767839 161767896.1 161768000.3 161770475.9 161770583.9 161771136.1 161771189.8 161772036.1 161772083.5 161772936.1 161772958.2 161773056 161773093.9 161773836.1 161773889.8 161774736.1 161774758.2 161796696.1 161796702.4 161797236.1 161797283.5 161797356 161797523.4 161797716 161797788.6 161797835.9 161797876.9 161797956.1 161798019.3 161812536.1 161812595.9 161812716.1 161812836 161813270.9'
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[chkfile]
type = CSV
show = 'average_burnup fis_gas_percent FCT rod_ave_lin_pow'
execute_on = 'FINAL'
[]
[console]
type = Console
max_rows = 25
[]
[]
[Debug]
show_var_residual = 'disp_x temperature'
show_var_residual_norms = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_D/x441_1_5D_D.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample3.i)
# Sample at midplane
initial_fuel_density = 11057.75
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.0027
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[]
[AuxVariables]
[oxygen]
[]
[fission_rate]
[]
[burnup]
[]
[oxygen_to_metal_ratio]
order = CONSTANT
family = MONOMIAL
initial_condition = 1.982
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 39456.16 39456.16 43890.71 43890.71 53442.06 53442.06 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1148'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
extra_vector_tags = 'ref'
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
extra_vector_tags = 'ref'
[]
[]
[AuxKernels]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1372
rod_ave_lin_pow = power_history
pellet_diameter = 0.0054
execute_on = timestep_begin
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = 0.1372
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.982
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[oxygen_partial_pressure_integral]
type = MOXOxygenPartialPressure
block = fuel
temperature = temp
o2m_deviation = 0.02
po2_initial = 0.01
outputs = exodus
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
fixed_point_rel_tol = 1e-05
fixed_point_abs_tol = 1e-05
fixed_point_max_its = 1
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_ox]
type = ElementAverageValue
variable = oxygen
[]
[max_ox]
type = NodalExtremeValue
value_type = max
variable = oxygen
[]
[min_ox]
type = NodalExtremeValue
value_type = min
variable = oxygen
[]
[ave_om_ratio]
type = ElementAverageValue
variable = oxygen_to_metal_ratio
[]
[max_om_ratio]
type = ElementExtremeValue
value_type = max
variable = oxygen_to_metal_ratio
[]
[min_om_ratio]
type = ElementExtremeValue
value_type = min
variable = oxygen_to_metal_ratio
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior ave_om_ratio'
[]
[]
[MultiApps]
[sub]
type = TransientMultiApp
app_type = BisonApp
execute_on = timestep_end
catch_up = true
max_catch_up_steps = 10
positions = '0 0.005 0'
input_files = b14_ptm001_1D_sample3_ox.i
[]
[]
[Transfers]
[temp_to_sub]
type = MultiAppCopyTransfer
to_multi_app = sub
source_variable = temp
variable = temp
[]
[ox_from_sub]
type = MultiAppCopyTransfer
from_multi_app = sub
source_variable = oxygen
variable = oxygen
[]
[ox_to_met_from_sub]
type = MultiAppCopyTransfer
from_multi_app = sub
source_variable = oxygen_to_metal_ratio
variable = oxygen_to_metal_ratio
[]
[]
[Debug]
show_var_residual_norms = true
[]
(examples/1.5D_restart/Smeared_1.5D.i)
# Model is of a 10 pellet stack of fuel modeled in 1.5d
initial_fuel_density = 10431.0
[GlobalParams]
density = ${initial_fuel_density}
initial_porosity = 0.05
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = disp_x
temperature = temp
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
slices_per_block = 10
clad_gap_width = 8.0e-5
clad_thickness = 0.00056
fuel_height = 0.1186
plenum_height = 0.027
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 580.0 # set initial temp to coolant inlet
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[grain_radius]
block = fuel
initial_condition = 10e-6
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[vonmises]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain_rate]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[gas_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[densification]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[volumetric_swelling_strain]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[relocation]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads and interpolates an input file containing rod average linear power vs time
data_file = powerhistory.csv
scale_factor = 1
[]
[axial_peaking_factors] # reads and interpolates an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = peakingfactors.csv
scale_factor = 1
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp] # reads and interpolates input data defining amplitude curve for fill gas pressure
type = PiecewiseLinear
x = '-200 0'
y = '0 1'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.5e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel (block 2) only
burnup_function = burnup
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuelthermal_strain swell reloc'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
num_radial = 80
num_axial = 11
a_lower = 0.00324 # mesh dependent!
a_upper = 0.12184 # mesh dependent!
fuel_inner_radius = 0
fuel_outer_radius = .0041
fuel_volume_ratio = 1.0 #0.987775 # for use with dished pellets (ratio of actual volume to cylinder volume)
order = CONSTANT
family = MONOMIAL
RPF = RPF
[]
[]
[AuxKernels]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
factor = 3e13
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[grain_radius]
type = GrainRadiusAux
block = fuel
variable = grain_radius
temperature = temp
execute_on = linear
[]
[stress_xx] # computes stress components for output
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[creep_strain]
type = MaterialRealAux
property = effective_creep_strain
variable = creep_strain
block = clad
execute_on = timestep_end
[]
[strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[creep_strain_rate]
type = MaterialRealAux
property = creep_rate
variable = creep_strain_rate
block = clad
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
block = fuel
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
block = fuel
[]
[densification]
type = MaterialRealAux
variable = densification
property = densification
execute_on = timestep_end
block = fuel
[]
[volumetric_swelling_strain]
type = MaterialRealAux
variable = volumetric_swelling_strain
property = volumetric_swelling_strain
execute_on = timestep_end
block = fuel
[]
[relocation_strain]
type = MaterialRealAux
variable = relocation
property = relocation_strain
execute_on = timestep_end
block = fuel
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
formulation = kinematic
model = frictionless
penalty = 1e7
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
variable = temp
primary = 5
secondary = 10
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
contact_pressure = contact_pressure
[]
[]
[BCs]
[no_x_all] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure] # apply coolant pressure on clad outer walls
[coolantPressure]
boundary = 2
function = pressure_ramp # use the pressure_ramp function defined above
factor = 15.5e6
[]
[]
[PlenumPressure] # apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.0e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior # coupling to post processor to get gas temperature approximation
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
[]
[]
[]
[CoolantChannel]
[convective_clad_surface] # apply convective boundary to clad outer surface
boundary = 2
variable = temp
inlet_temperature = 580 # K
inlet_pressure = 15.5e6 # Pa
inlet_massflux = 3800 # kg/m^2-sec
rod_diameter = 0.948e-2 # m
rod_pitch = 1.26e-2 # m
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
thermal_conductivity_model = NFIR
temperature = temp
burnup_function = burnup
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup_function = burnup
diameter = 0.0082
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
diametral_gap =160.0e-6
burnup_relocation_stop = 0.024
relocation_activation1 = 5000.0
#relocation_activation2 = 22965.879
#relocation_activation3 = 16404.199
relocation_model = ESCORE_modified
eigenstrain_name = reloc
[]
[fuel_thermal_strain]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 295.0
eigenstrain_name = fuelthermal_strain
[]
[fuel_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup_function = burnup
# complete_burnup = 5
# total_densification = 0.01
initial_fuel_density = 10431.0
eigenstrain_name = swell
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
block = clad
[]
[stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'zrycreep'
block = clad
[]
[zrycreep]
type = ZryCreepLimbackHoppeUpdate
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
#absolute_tolerance = 1.0e-13
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
block = clad
#max_iterations = 50
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
burnup_function = burnup
grain_radius = grain_radius
gbs_model = true
[]
[]
#[Preconditioning]
# [SMP]
# type = SMP
# full = true
# []
#[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temp
[]
[limitX]
type = MaxIncrement
max_increment = 1e-5
variable = disp_x
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package' # -mat_superlu_dist_fact'
petsc_options_value = 'lu superlu_dist' # SamePattern_SameRowPerm'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-7 #1e-8 #1e-10
start_time = -200
n_startup_steps = 1
end_time = 8.0e7
dtmax = 2e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 8
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
[]
# [Quadrature]
# order = THIRD
# side_order = FIFTH
# []
# [Predictor]
# type = SimplePredictor
# scale = 1.0
# []
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
# scale_factor = -1
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[fis_gas_produced] # fission gas produced (moles)
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released] # fission gas released to plenum (moles)
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fission_gas_release]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
# addition = 2.853e-7 # plenum
fuel_pin_geometry = pin_geometry
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[_dt] # time step
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[alive_time]
type = PerfGraphData
section_name = Root
data_type = TOTAL
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
burnup_function = burnup
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.1186 # rod height
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temp
[]
[central_fuel_temp]
type = NodalVariableValue
nodeid = 262 #Mesh dependent (0.0041, 0.05661)
variable = temp
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
[]
### Comparisons for 1.5D work, mesh specific #################### # von Mises Stress
[top_vonMises_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = vonmises
[]
[center_vonMises_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = vonmises
[]
[bottom_vonMises_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = vonmises
[]
[average_vonMises_fuel]
type = ElementAverageValue
variable = vonmises
block = fuel
[]
[top_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = vonmises
[]
[top_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = vonmises
[]
[center_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = vonmises
[]
[center_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = vonmises
[]
[bottom_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = vonmises
[]
[bottom_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = vonmises
[]
[average_vonMises_clad]
type = ElementAverageValue
variable = vonmises
block = clad
[]
# radial stress
[top_stress_rr_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = stress_xx
[]
[center_stress_rr_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = stress_xx
[]
[bottom_stress_rr_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = stress_xx
[]
[average_stress_rr_fuel]
type = ElementAverageValue
variable = stress_xx
block = fuel
[]
[top_stress_rr_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = stress_xx
[]
[top_stress_rr_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = stress_xx
[]
[center_stress_rr_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = stress_xx
[]
[center_stress_rr_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = stress_xx
[]
[bottom_stress_rr_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = stress_xx
[]
[bottom_stress_rr_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = stress_xx
[]
[average_stress_rr_clad]
type = ElementAverageValue
variable = stress_xx
block = clad
[]
# radial strain
[top_strain_rr_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = strain_xx
[]
[center_strain_rr_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = strain_xx
[]
[bottom_strain_rr_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = strain_xx
[]
[average_strain_rr_fuel]
type = ElementAverageValue
variable = strain_xx
block = fuel
[]
[top_strain_rr_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = strain_xx
[]
[top_strain_rr_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = strain_xx
[]
[center_strain_rr_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = strain_xx
[]
[center_strain_rr_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = strain_xx
[]
[bottom_strain_rr_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = strain_xx
[]
[bottom_strain_rr_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = strain_xx
[]
[average_strain_rr_clad]
type = ElementAverageValue
variable = strain_xx
block = clad
[]
# effective creep strain
[top_creep_strain_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = creep_strain
[]
[top_creep_strain_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = creep_strain
[]
[center_creep_strain_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = creep_strain
[]
[center_creep_strain_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = creep_strain
[]
[bottom_creep_strain_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = creep_strain
[]
[bottom_creep_strain_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = creep_strain
[]
[average_creep_strain_clad]
type = ElementAverageValue
variable = creep_strain
block = clad
[]
### Nodal displacements
[top_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
[top_disp_r_clad_inner]
type = NodalVariableValue
variable = disp_x
nodeid = 63 #mesh dependent, at (0.00418, 0.09219)
[]
[top_disp_r_clad_outer]
type = NodalVariableValue
variable = disp_x
nodeid = 68 #mesh dependent, at (0.00474, 0.09219)
[]
[center_disp_r_clad_inner]
type = NodalVariableValue
variable = disp_x
nodeid = 36 #mesh dependent, at (0.00418, 0.05661)
[]
[center_disp_r_clad_outer]
type = NodalVariableValue
variable = disp_x
nodeid = 43 #mesh dependent, at (0.00474, 0.05661)
[]
[bottom_disp_r_clad_inner]
type = NodalVariableValue
variable = disp_x
nodeid = 9 #mesh dependent, at (0.00418, 0.02103)
[]
[bottom_disp_r_clad_outer]
type = NodalVariableValue
variable = disp_x
nodeid = 16 #mesh dependent, at (0.00418, 0.02103)
[]
### Nodal temperatures
[top_temp_fuel]
type = NodalVariableValue
variable = temp
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_temp_fuel]
type = NodalVariableValue
variable = temp
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_temp_fuel]
type = NodalVariableValue
variable = temp
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
[top_temp_clad_inner]
type = NodalVariableValue
variable = temp
nodeid = 63 #mesh dependent, at (0.00418, 0.09219)
[]
[top_temp_clad_outer]
type = NodalVariableValue
variable = temp
nodeid = 68 #mesh dependent, at (0.00474, 0.09219)
[]
[center_temp_clad_inner]
type = NodalVariableValue
variable = temp
nodeid = 36 #mesh dependent, at (0.00418, 0.05661)
[]
[center_temp_clad_outer]
type = NodalVariableValue
variable = temp
nodeid = 43 #mesh dependent, at (0.00474, 0.05661)
[]
[bottom_temp_clad_inner]
type = NodalVariableValue
variable = temp
nodeid = 9 #mesh dependent, at (0.00418, 0.02103)
[]
[bottom_temp_clad_outer]
type = NodalVariableValue
variable = temp
nodeid = 16 #mesh dependent, at (0.00418, 0.02103)
[]
### Nodal penetration
[top_penetration_fuel]
type = NodalVariableValue
variable = penetration
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_penetration_fuel]
type = NodalVariableValue
variable = penetration
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_penetration_fuel]
type = NodalVariableValue
variable = penetration
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
### Nodal contact pressure
[top_contact_pressure_fuel]
type = NodalVariableValue
variable = contact_pressure
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_contact_pressure_fuel]
type = NodalVariableValue
variable = contact_pressure
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_contact_pressure_fuel]
type = NodalVariableValue
variable = contact_pressure
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
### End of 1.5D comparisons
[center_eff_creep_rate_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent
variable = creep_strain_rate
[]
[center_eff_creep_rate_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent
variable = creep_strain_rate
[]
[effective_creep_strain_rate]
type = ElementAverageValue
variable = creep_strain_rate
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[densification]
type = ElementAverageValue
variable = densification
block = fuel
[]
[volumetric_swelling]
type = ElementAverageValue
variable = volumetric_swelling_strain
block = fuel
[]
[relocation]
type = ElementAverageValue
variable = relocation
block = fuel
[]
[]
[Outputs]
perf_graph = true
exodus = true
color = false
[console]
type = Console
max_rows = 25
[]
[]
(test/tests/mox_pore_velocity/MOXPoreVelocityVaporPressure.i)
# This input files uses the pore difusion kernels
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.1
pellet_outer_radius = 0.0041
include_clad = false
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
[]
[]
[Variables]
[temperature]
initial_condition = 1400.0
[]
[pore]
initial_condition = 0.12
scaling = 1e14
[]
[]
[AuxVariables]
[pore_speed_aux]
order = constant
family = monomial
[]
[fission_rate_aux_variable_mox]
order = first
family = lagrange
[]
[]
[Functions]
[power_history1]
type = PiecewiseLinear
x = '0 10000'
y = '0 50000'
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temperature
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temperature
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel (block 2) only
fission_rate = fission_rate_aux_variable_mox
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
# nu = 3.25e-8 #seems to be THE value to use... result is super sensitive to this number
# nu = 10e-10
nu = 1e-12
heating_function = power_history1
v_upper = 1e-12
v_lower = 1e-20
# v_upper = 1
# v_lower = 1
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temperature
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history1
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate_aux_kernel_mox]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate_aux_variable_mox
block = fuel
porosity = pore
initial_porosity = 0.12
rod_ave_lin_pow = power_history1
pellet_diameter = 0.0082
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[temp_outside] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = temperature
boundary = 10
value = 1400
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
block = fuel
temperature = temperature
porosity = pore
porosity_limit = 0.9
[]
[density_block]
type = GenericConstantMaterial
block = fuel
prop_names = density
prop_values = 10431.0
[]
[pore_velocity]
type = MOXPoreVelocityVaporPressure
block = fuel
temperature = temperature
scale_factor = 1e0
# limit = 1e-3
# scale_factor = 0.05 # go back to this if necessary
# scale_factor = 0.1
# oxygen_partial_pressure = PO2
[]
[oxygen_partial_pressure_integral]
type = MOXOxygenPartialPressure
block = fuel
temperature = temperature
o2m_deviation = 0.02
po2_initial = 0.01
outputs = exodus
# type = GenericConstantMaterial
# block = fuel
# prop_names = PO2
# prop_values = 1.0
[]
[Sum]
type = MOXVaporPressure
temperature = temperature
block = fuel
evalerror_behavior = error
outputs = exodus
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
snesmf_reuse_base = false
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package' # -mat_superlu_dist_fact'
petsc_options_value = 'lu superlu_dist' # SamePattern_SameRowPerm'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-8 #1e-10
n_startup_steps = 1
end_time = 1.5e5
num_steps = 2
dtmax = 1000
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 8
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history1
[]
[]
[Postprocessors]
[_dt] # time step
type = TimestepSize
[]
[z_nonlinear_its] # number of nonlinear iterations at each timestep
type = NumNonlinearIterations
[]
[power_input]
type = FunctionValuePostprocessor
function = power_history1
scale_factor = 0.1 # rod height
[]
[rod_total_power_mox]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
block = fuel
fission_rate = fission_rate_aux_variable_mox
fuel_pin_geometry = pin_geometry
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temperature
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[center_PO2]
type = ElementalVariableValue
elementid = 0
variable = PO2
[]
[]
# The MOX capabilities are under active development and the blocks below are useful for
# development and debugging by providing the profiles of the desired quantities.
# They are commented out for the tests, as it would unnecessarily increase computational costs
# and memory requirements.
# [VectorPostprocessors]
# [line_value_vector_postprocessor_pore]
# type = LineValueSampler
# variable = pore
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# control_tags = a
# []
# [line_value_vector_postprocessor_pore_speed]
# type = LineValueSampler
# variable = pore_speed_aux
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_temperature]
# type = LineValueSampler
# variable = temperature
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# []
[Outputs]
exodus = true
csv = false
color = false
[console]
type = Console
max_rows = 25
all_variable_norms = true
[]
# [stuff_v_rad]
# type = CSV
# execute_on = 'FINAL'
# []
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM003/analysis/b14_ptm003_1D_sample1.i)
# Sample at +33 mm from the midplane
initial_fuel_density = 11172.82
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.0027
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.1409
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 39137.6 39137.6 43536.4 43536.4 53010.6 53010.6 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1120'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1409
rod_ave_lin_pow = power_history
pellet_diameter = 0.0054
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.961
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(test/tests/mox_pore_velocity/MOXActinide.i)
# This input files uses the actinide redistribution kernels coupled with pore diffusion
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.1
pellet_outer_radius = 0.0041
include_clad = false
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
[]
[]
[Variables]
[temperature]
initial_condition = 1400.0
[]
[pore]
initial_condition = 0.12
scaling = 1e14
[]
[actinide]
initial_condition = 20
scaling = 1e8
[]
[]
[AuxVariables]
[pore_speed_aux]
order = constant
family = monomial
[]
[fission_rate_aux_variable_mox]
order = first
family = lagrange
[]
[]
[Functions]
[power_history1]
type = PiecewiseLinear
x = '0 10000'
y = '0 50000'
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temperature
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temperature
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel (block 2) only
fission_rate = fission_rate_aux_variable_mox
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
# nu = 3.25e-8 #seems to be THE value to use... result is super sensitive to this number
# nu = 10e-10
nu = 1e-12
heating_function = power_history1
v_upper = 1e-12
v_lower = 1e-20
# v_upper = 1
# v_lower = 1
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temperature
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history1
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
[]
[actinide_redistribution]
type = MOXActinideRedistribution
variable = actinide
debug = 0
temperature = temperature
scale_factor = 0.5
v_upper = 0
v_lower = 0
heating_function = power_history1
[]
[actinide_redistribution_enhancement]
type = MOXActinideRedistributionEnhancement
variable = actinide
debug = 0
temperature = temperature
pore = pore
pore_diameter = 1e-10
pore_thickness = 1e-11
scaling_parameter_A = 0.35
scale_factor = 0.5
v_upper = 0
v_lower = 0
heating_function = power_history1
[]
[actinide_time_derivative]
type = CoefTimeDerivative
variable = actinide
Coefficient = 1
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate_aux_kernel_mox]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate_aux_variable_mox
block = fuel
porosity = pore
initial_porosity = 0.12
rod_ave_lin_pow = power_history1
pellet_diameter = 0.0082
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[temp_outside] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = temperature
boundary = 10
value = 1400
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
block = fuel
temperature = temperature
porosity = pore
[]
[density_block]
type = GenericConstantMaterial
block = fuel
prop_names = density
prop_values = 10431.0
[]
[pore_velocity]
type = MOXPoreVelocity
block = fuel
temperature = temperature
limit = 1e-3
# scale_factor = 0.05 # go back to this if necessary
scale_factor = 0.1
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package' # -mat_superlu_dist_fact'
petsc_options_value = 'lu superlu_dist' # SamePattern_SameRowPerm'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-8 #1e-10
n_startup_steps = 1
end_time = 8e4
num_steps = 2
dtmax = 1000
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 8
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history1
[]
[]
[Postprocessors]
[_dt] # time step
type = TimestepSize
[]
[z_nonlinear_its] # number of nonlinear iterations at each timestep
type = NumNonlinearIterations
[]
[power_input]
type = FunctionValuePostprocessor
function = power_history1
scale_factor = 0.1 # rod height
[]
[rod_total_power_mox]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
block = fuel
fission_rate = fission_rate_aux_variable_mox
fuel_pin_geometry = pin_geometry
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temperature
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[max_actinide]
type = NodalExtremeValue
variable = actinide
block = fuel
execute_on = 'initial timestep_end'
[]
[min_actinide]
type = NodalExtremeValue
variable = actinide
block = fuel
value_type = min
execute_on = 'initial timestep_end'
[]
[average_actinide]
type = AverageNodalVariableValue
variable = actinide
block = fuel
execute_on = 'initial timestep_end'
[]
[]
# The MOX capabilities are under active development and the blocks below are useful for
# development and debugging by providing the profiles of the desired quantities.
# They are commented out for the tests, as it would unnecessarily increase computational costs
# and memory requirements.
# [VectorPostprocessors]
# [line_value_vector_postprocessor_pore]
# type = LineValueSampler
# variable = pore
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# control_tags = a
# []
# [line_value_vector_postprocessor_pore_speed]
# type = LineValueSampler
# variable = pore_speed_aux
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_temperature]
# type = LineValueSampler
# variable = temperature
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_actinide]
# type = LineValueSampler
# variable = actinide
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# []
[Outputs]
exodus = true
csv = false
color = false
[console]
type = Console
max_rows = 25
all_variable_norms = true
[]
# [stuff_v_rad]
# type = CSV
# execute_on = 'FINAL'
# []
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM002/analysis/b14_ptm002_1D_sample1.i)
# Sample at +33 mm from the midplane
initial_fuel_density = 11057.75
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.002675
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.1372
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 39575.6 39575.6 44023.6 44023.6 53603.8 53603.8 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1280.8'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1372
rod_ave_lin_pow = power_history
pellet_diameter = 0.00535
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.982
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_F/x441_1_5D_F.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM010/analysis/b14_ptm010_1D_sample1.i)
# Sample at +33 mm from the midplane
initial_fuel_density = 10964.6
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.002675
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.143
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 39575.6 39575.6 44023.6 44023.6 53603.8 53603.8 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1294.5'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.143
rod_ave_lin_pow = power_history
pellet_diameter = 0.00535
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.99
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(examples/1.5D_rodlet_10pellets/1_5D_friction.i)
# Model is of a 10 pellet stack of fuel modeled in 1.5d
pressure_test = 2.0e6
initial_fuel_density = 10431.0
[GlobalParams]
density = ${initial_fuel_density}
initial_porosity = 0.05
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = disp_x
temperature = temperature
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
[]
[Mesh]
# Specify coordinate system type
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
slices_per_block = 10
clad_gap_width = 8.0e-5
clad_thickness = 0.00056
fuel_height = 0.1186
plenum_height = 0.027
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[AuxVariables]
[tangential_contact_pressure_aux]
block = fuel
[]
[]
[AuxKernels]
[tangential_contact_pressure_aux]
type = SpatialUserObjectAux
variable = tangential_contact_pressure_aux
user_object = 1DFriction_secondary
block = fuel
execute_on = 'TIMESTEP_END'
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[cladding_strain_yy]
type = LayeredAverage
block = clad
num_layers = 11
direction = y
variable = strain_yy
execute_on = 'initial timestep_end'
[]
[fuel_strain_yy]
type = LayeredAverage
block = fuel
num_layers = 10
direction = y
variable = strain_yy
execute_on = 'initial timestep_end'
[]
# We could have two element UOs to obtain interface stress
[1DContactStressOOP_fuel]
type = Layered1DContactInterfaceStress
direction = y
stress_name = stress
num_layers = 10
# If we do not provide the numbers below, it will look at the mesh, in all blocks to set the layer number. Then, it will
# be wrong because the cladding has more height and won't be able to identify layers in the fuel.
direction_min = 0.00917
direction_max = 0.11591
block = fuel
execute_on = 'LINEAR NONLINEAR'
[]
[1DContactStressOOP_cladding]
type = Layered1DContactInterfaceStress
direction = y
stress_name = stress
num_layers = 10
# If we do not provide the numbers below, it will look at the mesh, in all blocks to set the layer number. Then, it will
# be wrong because the cladding has more height and won't be able to identify layers in the fuel.
direction_min = 0.00917
direction_max = 0.11591
block = clad
execute_on = 'LINEAR NONLINEAR'
[]
[1DFriction_secondary]
type = Layered1DFrictionalForce
force_postaux = true
contact_pressure = contact_pressure
direction = y
boundary = pellet_outer_radial_surface
num_layers = 10
interface_oop_stress_provider_fuel = 1DContactStressOOP_fuel
interface_oop_stress_provider_cladding = 1DContactStressOOP_cladding
is_secondary_side = true
tangential_pressure = tangential_contact_pressure_aux
friction_coefficient = 0.2
thickness = 0.01
penalty_factor = 1.0e13
# If we do not provide the numbers below, it will look at the mesh, in all blocks to set the layer number. Then, it will
# be wrong because the cladding has more height and won't be able to identify layers in the fuel.
direction_min = 0.00917
direction_max = 0.11591
scalar_var_name_base_fuel = scalar_strain_yy_fuel
scalar_num_variable_fuel = 10
scalar_var_name_base_cladding = scalar_strain_yy_clad
scalar_num_variable_cladding = 10
execute_on = 'LINEAR NONLINEAR'
[]
[1DFriction_primary]
type = Layered1DFrictionalForce
force_postaux = true
contact_pressure = contact_pressure
direction = y
boundary = clad_inside_right
num_layers = 10
# If we do not provide the numbers below, it will look at the mesh, in all blocks to set the layer number. Then, it will
# be wrong because the cladding has more height and won't be able to identify layers in the fuel.
direction_min = 0.00917
direction_max = 0.11591
interface_oop_stress_provider_fuel = 1DContactStressOOP_fuel
interface_oop_stress_provider_cladding = 1DContactStressOOP_cladding
is_secondary_side = false
secondary_side_frictional_user_object = 1DFriction_secondary
friction_coefficient = 0.2
thickness = 0.01
penalty_factor = 1.0e13
scalar_var_name_base_fuel = scalar_strain_yy_fuel
scalar_num_variable_fuel = 10
scalar_var_name_base_cladding = scalar_strain_yy_clad
scalar_num_variable_cladding = 10
execute_on = 'LINEAR NONLINEAR'
[]
[]
[Variables]
[temperature]
initial_condition = 580.0 # set initial temperature to coolant inlet
[]
[]
[AuxVariables]
[disp_y] ## Required for easier visualization in Paraview
[]
[disp_z] ## Required for easier visualization in Paraview
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[grain_radius]
block = fuel
initial_condition = 10e-6
[]
[creep_strain_rate]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[solid_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[gas_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[densification]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[volumetric_swelling_strain]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[relocation]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[discrete_contact_pressure]
order = FIRST
family = LAGRANGE
block = fuel
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads and interpolates an input file containing rod average linear power vs time
data_file = powerhistory.csv
scale_factor = 1
[]
[axial_peaking_factors] # reads and interpolates an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = peakingfactors.csv
scale_factor = 1
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp] # reads and interpolates input data defining amplitude curve for fill gas pressure
type = PiecewiseLinear
x = '-200 0'
y = '0 1'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.5e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temperature
extra_vector_tags = 'ref'
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel (block 2) only
burnup_function = burnup
extra_vector_tags = 'ref'
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
block = fuel
add_variables = true
strain = FINITE
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
eigenstrain_names = 'fuelthermal_strain swelling_strain fuel_relocation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
outputs = none
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
layer_friction_user_object = 1DFriction_secondary
[]
[clad]
block = clad
add_variables = true
strain = FINITE
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress strain_xx'
extra_vector_tags = 'ref'
outputs = none
group_scalar_vars_in_reference_residual = true
mesh_generator = layered1D_mesh
layer_friction_user_object = 1DFriction_primary
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
num_radial = 80
num_axial = 11
order = CONSTANT
family = MONOMIAL
fuel_pin_geometry = pin_geometry
fuel_volume_ratio = 1.0 # for use with dished pellets (ratio of actual volume to cylinder volume)
RPF = RPF
isotopes = 'U235 U238'
isotope_fractions = '0.05 0.95'
[]
[]
[AuxKernels]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
factor = 3e13
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[grain_radius]
type = GrainRadiusAux
block = fuel
variable = grain_radius
temperature = temperature
execute_on = linear
[]
[creep_strain]
type = MaterialRealAux
property = effective_creep_strain
variable = creep_strain
block = clad
execute_on = timestep_end
[]
[creep_strain_rate]
type = MaterialRealAux
property = creep_rate
variable = creep_strain_rate
block = clad
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
block = fuel
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
block = fuel
[]
[densification]
type = MaterialRealAux
variable = densification
property = densification
execute_on = timestep_end
block = fuel
[]
[volumetric_swelling_strain]
type = MaterialRealAux
variable = volumetric_swelling_strain
property = volumetric_swelling_strain
execute_on = timestep_end
block = fuel
[]
[relocation_strain]
type = MaterialRealAux
variable = relocation
property = relocation_strain
execute_on = timestep_end
block = fuel
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = clad_inside_right
secondary = pellet_outer_radial_surface
formulation = kinematic
model = frictionless
penalty = 1e7
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
variable = temperature
primary = clad_inside_right
secondary = pellet_outer_radial_surface
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
contact_pressure = contact_pressure
quadrature = true
[]
[]
[BCs]
[no_x_all] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure] # apply coolant pressure on clad outer walls
[coolantPressure]
boundary = 2
function = pressure_ramp # use the pressure_ramp function defined above
factor = 15.5e6
[]
[]
[PlenumPressure] # apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = ${pressure_test}
startup_time = 0
R = 8.314
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior # coupling to post processor to get gas temperature approximation
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
[]
[]
[]
[CoolantChannel]
[convective_clad_surface] # apply convective boundary to clad outer surface
variable = temperature
boundary = 2
inlet_temperature = 580 # K
inlet_pressure = 15.5e6 # Pa
inlet_massflux = 3800 # kg/m^2-sec
rod_diameter = 0.948e-2 # m
rod_pitch = 1.26e-2 # m
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
thermal_conductivity_model = NFIR
temperature = temperature
burnup_function = burnup
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_strain]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 295.0
eigenstrain_name = fuelthermal_strain
[]
[fuel_swelling]
type = UO2VolumetricSwellingEigenstrain
block = fuel
gas_swelling_model_type = SIFGRS
burnup_function = burnup
initial_fuel_density = 10431.0
eigenstrain_name = swelling_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup_function = burnup
fuel_pin_geometry = pin_geometry
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
relocation_activation1 = 5000.0
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temperature
burnup_function = burnup
gbs_model = true
grain_radius = grain_radius
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
block = clad
tangent_operator = elastic
inelastic_models = 'zrycreep'
[]
[zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[clad_thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[limitX]
type = MaxIncrement
max_increment = 1e-5
variable = disp_x
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-7
start_time = -200
n_startup_steps = 1
end_time = 8.0e7
dtmax = 2e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 18
iteration_window = 2
growth_factor = 2
cutback_factor = .5
[]
[]
[Postprocessors]
### Nodal contact pressure
[top_contact_pressure_fuel]
type = NodalVariableValue
variable = discrete_contact_pressure
nodeid = 361 # mesh dependent, at (0.0041, 0.09219)
[]
[center_contact_pressure_fuel]
type = NodalVariableValue
variable = discrete_contact_pressure
nodeid = 262 # mesh dependent, at (0.0041, 0.05661)
[]
[bottom_contact_pressure_fuel]
type = NodalVariableValue
variable = discrete_contact_pressure
nodeid = 163 # mesh dependent, at (0.0041, 0.02103)
[]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temperature
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
# scale_factor = -1
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[fis_gas_produced] # fission gas produced (moles)
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released] # fission gas released to plenum (moles)
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fission_gas_release]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temperature
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
burnup_function = burnup
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.1186 # rod height
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temperature
[]
[central_fuel_temp]
type = NodalVariableValue
nodeid = 262 #Mesh dependent (0.0041, 0.05661)
variable = temperature
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temperature
[]
### Comparisons for 1.5D work, mesh specific #################### # von Mises Stress
[top_vonMises_fuel]
type = ElementalVariableValue
elementid = 171 # mesh dependent (contains pt. 0.0041, 0.09219)
variable = vonmises_stress
[]
[center_vonMises_fuel]
type = ElementalVariableValue
elementid = 123 # mesh dependent (contains pt. 0.0041, 0.05661)
variable = vonmises_stress
[]
[bottom_vonMises_fuel]
type = ElementalVariableValue
elementid = 75 # mesh dependent (contains pt. 0.0041, 0.02103)
variable = vonmises_stress
[]
[average_vonMises_fuel]
type = ElementAverageValue
variable = vonmises_stress
block = fuel
[]
[top_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 28 # mesh dependent (contains pt. 0.00418, 0.09219)
variable = vonmises_stress
[]
[top_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 31 # mesh dependent (contains pt. 0.00474, 0.09219)
variable = vonmises_stress
[]
[center_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 16 # mesh dependent (contains pt. 0.00418, 0.05661)
variable = vonmises_stress
[]
[center_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 19 # mesh dependent (contains pt. 0.00474, 0.05661)
variable = vonmises_stress
[]
[bottom_vonMises_clad_inner]
type = ElementalVariableValue
elementid = 4 # mesh dependent (contains pt. 0.00418, 0.02103)
variable = vonmises_stress
[]
[bottom_vonMises_clad_outer]
type = ElementalVariableValue
elementid = 7 # mesh dependent (contains pt. 0.00474, 0.02103)
variable = vonmises_stress
[]
[average_vonMises_clad]
type = ElementAverageValue
variable = vonmises_stress
block = clad
[]
### End of 1.5D comparisons
[fuel_elongation]
type = LayeredElongation
fuel_pin_geometry = pin_geometry
out_of_plane_strain_fuel = fuel_strain_yy
execute_on = 'initial timestep_end'
[]
[clad_elongation]
type = LayeredElongation
fuel_pin_geometry = pin_geometry
out_of_plane_strain_cladding = cladding_strain_yy
execute_on = 'initial timestep_end'
[]
[]
[VectorPostprocessors]
[clad]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'clad_radial_displacement'
[]
[pellet]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'fuel_radial_displacement'
[]
[contact_pressure_output]
type = NodalValueSampler
variable = contact_pressure
boundary = 10
sort_by = y
outputs = 'contact_pressure_output'
[]
[tangential_pressure_output]
type = NodalValueSampler
variable = tangential_contact_pressure_aux
boundary = 10
sort_by = y
outputs = 'tangential_pressure_output'
[]
[]
[Outputs]
perf_graph = true
exodus = true
csv = true
color = false
[clad_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[contact_pressure_output]
type = CSV
execute_on = 'TIMESTEP_END'
[]
[tangential_pressure_output]
type = CSV
execute_on = 'TIMESTEP_END'
[]
[]
(assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample3_noAm.i)
# Sample at midplane
initial_fuel_density = 11026.4
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.0027
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[]
[AuxVariables]
[oxygen]
[]
[fission_rate]
[]
[burnup]
[]
[oxygen_to_metal_ratio]
order = CONSTANT
family = MONOMIAL
initial_condition = 1.982
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 39456.16 39456.16 43890.71 43890.71 53442.06 53442.06 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1148'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
extra_vector_tags = 'ref'
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
extra_vector_tags = 'ref'
[]
[]
[AuxKernels]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1372
rod_ave_lin_pow = power_history
pellet_diameter = 0.0054
execute_on = timestep_begin
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = 0.1372
block = fuel
Am_content = 0.0
oxy_to_metal_ratio = 1.982
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[oxygen_partial_pressure_integral]
type = MOXOxygenPartialPressure
block = fuel
temperature = temp
o2m_deviation = 0.02
po2_initial = 0.01
outputs = exodus
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
fixed_point_rel_tol = 1e-05
fixed_point_abs_tol = 1e-05
fixed_point_max_its = 1
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_ox]
type = ElementAverageValue
variable = oxygen
[]
[max_ox]
type = NodalExtremeValue
value_type = max
variable = oxygen
[]
[min_ox]
type = NodalExtremeValue
value_type = min
variable = oxygen
[]
[ave_om_ratio]
type = ElementAverageValue
variable = oxygen_to_metal_ratio
[]
[max_om_ratio]
type = ElementExtremeValue
value_type = max
variable = oxygen_to_metal_ratio
[]
[min_om_ratio]
type = ElementExtremeValue
value_type = min
variable = oxygen_to_metal_ratio
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior ave_om_ratio'
[]
[]
[MultiApps]
[sub]
type = TransientMultiApp
app_type = BisonApp
execute_on = timestep_end
catch_up = true
max_catch_up_steps = 10
positions = '0 0.005 0'
input_files = b14_ptm001_1D_sample3_ox_noAm.i
[]
[]
[Transfers]
[temp_to_sub]
type = MultiAppCopyTransfer
to_multi_app = sub
source_variable = temp
variable = temp
[]
[ox_from_sub]
type = MultiAppCopyTransfer
from_multi_app = sub
source_variable = oxygen
variable = oxygen
[]
[ox_to_met_from_sub]
type = MultiAppCopyTransfer
from_multi_app = sub
source_variable = oxygen_to_metal_ratio
variable = oxygen_to_metal_ratio
[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/LWR/validation/RE_Ginna_Rodlets/analysis/RE_Ginna_rodlet-4/RE_Ginna_rodlet_4_1pt5.i)
# This file contains all characteristics specific to the Rodlet 4 1.5 D layered model
# It uses information from the Base file to create a complete input file
!include ../RE_Ginna_Rodlets_Base.i
id = RE_Ginna_rodlet_4_1pt5
# Fuel material properties
initial_grain_radius = 10.0e-6 # m (2D grain radius 10.0e-6)
fuel_youngs_modulus = 2.0e11 # Pa
fuel_poissons_ratio = 0.345 # (-)
# Cladding material properties
cladding_thermal_expansion_coeff = 5.0e-6 # K^-1
# Rod geometry
fuel_inner_radius = 0.001407 # m
pellet_inner_radius = 0.001407 # m
pellet_outer_radius = 0.0044515 # m
fuel_height = 0.541782 # m
plenum_height = 0.047316 # m
rod_power_scale_factor = 0.541782 # m (rod height)
# Cladding geometry
clad_gap_width = 9.5e-5 # m
clad_thickness = 7.495e-4 # m
# Mesh parameters
slices_per_block = 10
fuel_blockid = fuel
clad_blockid = clad
# Coolant pressure ramp parameters
pressure_ramp_x = '-100 0 115273407.3 115273767.3'
pressure_ramp_y = '0.006533 1 1 0.006533'
coolant_pressure_scaling_factor = 15.51e6
# Isotope fractions
isotope_fraction_U235 = 0.037
isotope_fraction_U238 = 0.963
# BC boundary names
clad_surface_temperature_boundary = 2
coolantPressure_boundary = 2
PP_temperature = ave_temperature_interior
PP_volume = gas_volume
# Materials block parameters
fuel_elasticity_tensor_type = ComputeIsotropicElasticityTensor
clad_stress_inelastic_models = 'clad_creep'
clad_thermal_expansion_type = ComputeThermalExpansionEigenstrain
# Eigenstrain names
fuel_thermal_expansion_eigenstrain_name = fuel_thermal_strain
fuel_volumetric_swelling_eigenstrain_name = fuel_volumetric_strain
clad_thermal_expansion_eigenstrain_name = clad_thermal_eigenstrain
# Relocation
burnup_relocation_stop = 0.0204 # FIMA
# Numerical options
damper_max_temperature_value = 3200 # K
damper_min_temperature_value = 275 # K
verbose_option = false
nl_max_its = 50
end_time = 115273767.3 # s
TimeStepper_optimal_iterations = 15
TimeStepper_iteration_window = 5
TimeStepper_max_function_change = 3e20
# Postprocessor parameters
fis_gas_grain_Postpro_type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
fis_gas_boundary_Postpro_type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
clad_flux_Postpro_type = LayeredSideFluxIntegralPostprocessor
fuel_flux_Postpro_type = LayeredSideFluxIntegralPostprocessor
FCT_nodeid = 264 # GlobalNodeID 265, coords (0.001407, 0.30122)
gap_nodeid = 295 # coords (0.0044515, 0.30122)
contact_pressure_nodeid = 295 # coords (0.0044515, 0.30122)
# Data file pathways
power_history_data_file = 'RE_Ginna_rodlet-4/rodlet4_power.csv'
axial_peaking_data_file = 'RE_Ginna_rodlet-4/rodlet4_axial_peaking.csv'
flux_data_file = 'RE_Ginna_rodlet-4/rodlet4_fast_flux.csv'
clad_temperature_bc_data_file = 'RE_Ginna_rodlet-4/rodlet4_clad_bc.csv'
[GlobalParams]
displacements = disp_x
temperature = temperature
[]
[Mesh]
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = ${pellet_inner_radius}
pellet_outer_radius = ${pellet_outer_radius}
clad_gap_width = ${clad_gap_width}
clad_thickness = ${clad_thickness}
fuel_height = ${fuel_height}
plenum_height = ${plenum_height}
slices_per_block = ${slices_per_block}
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Functions]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = ${coolant_pressure_scaling_factor}
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_volumetric_strain
fuel_relocation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress
hydrostatic_stress'
mesh_generator = layered1D_mesh
extra_vector_tags = 'ref'
group_scalar_vars_in_reference_residual = true
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress creep_strain_xx
creep_strain_xy creep_strain_yy creep_strain_zz'
mesh_generator = layered1D_mesh
extra_vector_tags = 'ref'
group_scalar_vars_in_reference_residual = true
[]
[]
[]
[]
[Burnup]
[burnup]
density = ${initial_fuel_density}
[]
[]
[Materials]
[fuel_elasticity_tensor]
youngs_modulus = ${fuel_youngs_modulus}
poissons_ratio = ${fuel_poissons_ratio}
[]
[clad_thermal_expansion]
thermal_expansion_coeff = ${cladding_thermal_expansion_coeff}
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
# [limitT]
# type = MaxIncrement
# variable = temperature
# max_increment = 50
# []
[limitT]
type = BoundingValueNodalDamper
variable = temperature
max_value = ${damper_max_temperature_value}
min_value = ${damper_min_temperature_value}
[]
[]
[Executioner]
[TimeStepper]
max_function_change = ${TimeStepper_max_function_change}
[]
[]
[Postprocessors]
[ave_temperature_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temperature
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial timestep_end'
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial timestep_end'
[]
[avg_clad_temperature]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temperature
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = ${fuel_blockid}
fuel_pin_geometry = pin_geometry
[]
[fission_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = ${fuel_blockid}
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
fission_rate = fission_rate
block = ${fuel_blockid}
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = ${rod_power_scale_factor}
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[rod_ave_lin_pow]
type = LayeredElementIntegralPowerPostprocessor
block = ${fuel_blockid}
burnup_function = burnup
variable = temperature
fuel_pin_geometry = pin_geometry
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fission_gas_released
fission_gas_generated = fis_gas_generated
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = ${fuel_blockid}
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = ${clad_blockid}
variable = vonmises_stress
[]
# nodal value comparison
[FCT]
type = NodalVariableValue
variable = temperature
nodeid = ${FCT_nodeid}
[]
[gap]
type = NodalVariableValue
variable = penetration
nodeid = ${gap_nodeid}
[]
[contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = ${contact_pressure_nodeid}
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_clad'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_pellet'
[]
[]
[Outputs]
[outfile_clad]
type = CSV
file_base = '${id}_outfile_clad'
execute_on = 'FINAL'
[]
[outfile_pellet]
type = CSV
file_base = '${id}_outfile_pellet'
execute_on = 'FINAL'
[]
[chkfile]
type = CSV
file_base = '${id}_chkfile'
show = 'average_burnup fis_gas_percent FCT rod_total_power'
execute_on = 'FINAL'
[]
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_E/x441_1_5D_E.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_tenslice.i)
# Model is of a 10 slice pellet stack in 1.5D
# Top plenum height of 295.07 mm + bot_gap_height = 1.e-3 in 2D mesh
initial_fuel_density = 10431
[GlobalParams]
density = ${initial_fuel_density} #95% of TD (TD assumed to be 10980)
displacements = disp_x
temperature = temp
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = false
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.0041275
clad_gap_width = 8.89e-5
clad_thickness = 6.35e-4
fuel_height = 3.81381
plenum_height = 0.29607
slices_per_block = 10
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 300.0 # set initial temp to ambient
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 8.7945e-6 # ((11.6+11.2+11.2+11.1)/4)/2*1.56
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[vonmises_stress]
order = CONSTANT
family = MONOMIAL
[]
[hydrostatic_stress]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain_xx]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_xy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_yy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_zz]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads an input file containing rod average linear power vs time
data_file = TSQ002_alhr.csv
format = columns
[]
[axial_peaking_factors]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_alhr_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp]
# reads an input data defining amplitude curve for coolant pressure
type = PiecewiseLinear
x = '-100 0 141798626 141802226' # -100 @ 101326 Pa, 0 to 141798626 @ 15.517 MPa, 141802226 @ 101326 Pa
y = '.00653 1 1 .00653'
[]
[flux]
type = PiecewiseLinear
data_file = TSQ002_fast_flux.csv
format = columns
[]
[clad_wall_temp]
type = PiecewiseLinear
data_file = TSQ002_clad_temp.csv
format = columns
[]
[axial_clad_peaking]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_clad_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[clad_bc]
type = CompositeFunction
functions = 'clad_wall_temp axial_clad_peaking'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.517e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie]
# time term in heat cnduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
# source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate # coupling to the fission_rate aux variable
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain fuel_volumetric_strain'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
fuel_pin_geometry = pin_geometry
isotopes = 'U235 U238 Pu239 Pu240 Pu241 Pu242'
isotope_fractions = '0.0348 0.9652 0 0 0 0'
fuel_volume_ratio = 1.0
RPF = RPF
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
function = flux
factor = 1
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[stress_xx] # computes stress components for output
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises_stress
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[hydrostatic_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = hydrostatic_stress
scalar_type = VonMisesStress
execute_on = timestep_end
block = fuel
[]
[strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
block = clad
execute_on = timestep_end
[]
[creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_zz]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_zz
index_i = 2
index_j = 2
block = clad
execute_on = timestep_end
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5 # clad
secondary = 10 # fuel
formulation = kinematic
penalty = 1e7
model = frictionless
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
secondary = 10 # fuel
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
primary = 5 # clad
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
variable = temp
tangential_tolerance = 1e-6
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
quadrature = true
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[clad_surface_temperature]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = clad_bc
[]
[Pressure]
# apply coolant pressure on clad outer walls
[coolantPressure]
boundary = '2'
factor = 15.517e6
function = pressure_ramp # use the pressure_ramp function defined above
displacements = 'disp_x'
[]
[]
[PlenumPressure]
# apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.62e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup = burnup
thermal_conductivity_model = NFIR
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
fuel_pin_geometry = pin_geometry
relocation_activation1 = 5000
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup = burnup
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
fission_rate = fission_rate
grain_radius = grain_radius
initial_porosity = 0.05
burnup = burnup
gbs_model = true
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 7.5e10
poissons_ratio = 0.3
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 300.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 20.0
variable = temp
[]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu'
line_search = 'none'
# controls for linear iterations
l_max_its = 100
l_tol = 1e-4 #8e-3
# controls for nonlinear iterations
nl_max_its = 50
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
# time control
start_time = -100
end_time = 141802226 #141798626+3600
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
iteration_window = 2
optimal_iterations = 10
[]
[Quadrature]
order = fifth
side_order = seventh
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[avg_clad_temp]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
execute_on = 'initial timestep_end'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = NodalExtremeValue
block = clad
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.81 # rod height
[]
[average_fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[FCT]
type = NodalVariableValue
variable = temp
nodeid = 231 # Global node id 232, at coordinates (0.0, 1.71774, 0.0)
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[max_penetration]
type = NodalExtremeValue
block = fuel
value_type = max
variable = penetration
[]
[min_penetration]
type = NodalExtremeValue
block = fuel
value_type = min
variable = penetration
[]
[max_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = max
variable = contact_pressure
[]
[min_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = min
variable = contact_pressure
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
## Nodal comparison values
[top_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 427 #coords (0.0041275, 3.62274)
[]
[top_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 81 #coords (0.0042164, 3.62274)
[]
[plenum_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 90 #coords (0.0042164, 3.96053)
[]
[top_radial_strain_fuel]
type = ElementalVariableValue
variable = strain_xx
elementid = 203
[]
[top_axial_strain_fuel]
type = ElementalVariableValue
elementid = 203
variable = strain_yy
[]
[top_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 36
[]
[top_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 36
[]
[plenum_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 40
[]
[plenum_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 40
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[pellet_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 10
# sort_by = y
# outputs = 'outfile_fuel_surface_temp'
#[]
#[pellet_center_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 12
# sort_by = y
# outputs = 'outfile_FCT'
#[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[outfile_fuel_surface_temp]
# type = CSV
# execute_on = linear
#[]
#[outfile_FCT]
# type = CSV
# execute_on = linear
#[]
[console]
type = Console
max_rows = 25
[]
[]
(test/tests/mox_pore_velocity/MOXPoreVelocity.i)
# This input files uses the pore difusion kernels
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.1
pellet_outer_radius = 0.0041
include_clad = false
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
[]
[]
[Variables]
[temperature]
initial_condition = 1400.0
[]
[pore]
initial_condition = 0.12
scaling = 1e14
[]
[]
[AuxVariables]
[pore_speed_aux]
order = constant
family = monomial
[]
[fission_rate_aux_variable_mox]
order = first
family = lagrange
[]
[]
[Functions]
[power_history1]
type = PiecewiseLinear
x = '0 10000'
y = '0 50000'
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temperature
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temperature
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel (block 2) only
fission_rate = fission_rate_aux_variable_mox
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
# nu = 3.25e-8 #seems to be THE value to use... result is super sensitive to this number
# nu = 10e-10
nu = 1e-12
heating_function = power_history1
v_upper = 1e-12
v_lower = 1e-20
# v_upper = 1
# v_lower = 1
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temperature
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history1
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate_aux_kernel_mox]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate_aux_variable_mox
block = fuel
porosity = pore
initial_porosity = 0.12
rod_ave_lin_pow = power_history1
pellet_diameter = 0.0082
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[temp_outside] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = temperature
boundary = 10
value = 1400
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
block = fuel
temperature = temperature
porosity = pore
porosity_limit = 0.9
[]
[density_block]
type = GenericConstantMaterial
block = fuel
prop_names = density
prop_values = 10431.0
[]
[pore_velocity]
type = MOXPoreVelocity
block = fuel
temperature = temperature
limit = 1e-3
# scale_factor = 0.05 # go back to this if necessary
scale_factor = 0.1
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package' # -mat_superlu_dist_fact'
petsc_options_value = 'lu superlu_dist' # SamePattern_SameRowPerm'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-8 #1e-10
n_startup_steps = 1
end_time = 1.5e5
num_steps = 2
dtmax = 1000
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 8
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history1
[]
[]
[Postprocessors]
[_dt] # time step
type = TimestepSize
[]
[z_nonlinear_its] # number of nonlinear iterations at each timestep
type = NumNonlinearIterations
[]
[power_input]
type = FunctionValuePostprocessor
function = power_history1
scale_factor = 0.1 # rod height
[]
[rod_total_power_mox]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
block = fuel
fission_rate = fission_rate_aux_variable_mox
fuel_pin_geometry = pin_geometry
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temperature
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[]
# The MOX capabilities are under active development and the blocks below are useful for
# development and debugging by providing the profiles of the desired quantities.
# They are commented out for the tests, as it would unnecessarily increase computational costs
# and memory requirements.
# [VectorPostprocessors]
# [line_value_vector_postprocessor_pore]
# type = LineValueSampler
# variable = pore
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# control_tags = a
# []
# [line_value_vector_postprocessor_pore_speed]
# type = LineValueSampler
# variable = pore_speed_aux
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_temperature]
# type = LineValueSampler
# variable = temperature
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# []
[Outputs]
exodus = true
csv = false
color = false
[console]
type = Console
max_rows = 25
all_variable_norms = true
[]
# [stuff_v_rad]
# type = CSV
# execute_on = 'FINAL'
# []
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM010/analysis/b14_ptm010_1D_sample2.i)
# Sample at +97mm from midplane
initial_fuel_density = 10964.6
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.002675
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.143
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 36350.6 36350.6 40436.2 40436.2 49235.7 49235.7 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1325.5'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.143
rod_ave_lin_pow = power_history
pellet_diameter = 0.00535
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.99
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_fortyslice.i)
# Model is of a 40 slice pellet stack in 1.5D
# Top plenum height of 295.07 mm + bot_gap_height = 1.e-3 in 2D mesh
initial_fuel_density = 10431
[GlobalParams]
density = ${initial_fuel_density} #95% of TD (TD assumed to be 10980)
displacements = disp_x
temperature = temp
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = false
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.0041275
clad_gap_width = 8.89e-5
clad_thickness = 6.35e-4
fuel_height = 3.81381
plenum_height = 0.29607
slices_per_block = 40
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 300.0 # set initial temp to ambient
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 8.7945e-6 # ((11.6+11.2+11.2+11.1)/4)/2*1.56
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[vonmises_stress]
order = CONSTANT
family = MONOMIAL
[]
[hydrostatic_stress]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain_xx]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_xy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_yy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_zz]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads an input file containing rod average linear power vs time
data_file = TSQ002_alhr.csv
format = columns
[]
[axial_peaking_factors]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_alhr_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp]
# reads an input data defining amplitude curve for coolant pressure
type = PiecewiseLinear
x = '-100 0 141798626 141802226' # -100 @ 101326 Pa, 0 to 141798626 @ 15.517 MPa, 141802226 @ 101326 Pa
y = '.00653 1 1 .00653'
[]
[flux]
type = PiecewiseLinear
data_file = TSQ002_fast_flux.csv
format = columns
[]
[clad_wall_temp]
type = PiecewiseLinear
data_file = TSQ002_clad_temp.csv
format = columns
[]
[axial_clad_peaking]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_clad_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[clad_bc]
type = CompositeFunction
functions = 'clad_wall_temp axial_clad_peaking'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.517e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie]
# time term in heat cnduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
# source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate # coupling to the fission_rate aux variable
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain fuel_volumetric_strain'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
fuel_pin_geometry = pin_geometry
isotopes = 'U235 U238 Pu239 Pu240 Pu241 Pu242'
isotope_fractions = '0.0348 0.9652 0 0 0 0'
RPF = RPF
fuel_volume_ratio = 1.0
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
function = flux
factor = 1
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[stress_xx] # computes stress components for output
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises_stress
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[hydrostatic_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = hydrostatic_stress
scalar_type = VonMisesStress
execute_on = timestep_end
block = fuel
[]
[strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
block = clad
execute_on = timestep_end
[]
[creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_zz]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_zz
index_i = 2
index_j = 2
block = clad
execute_on = timestep_end
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5 # clad
secondary = 10 # fuel
formulation = kinematic
penalty = 1e7
model = frictionless
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
secondary = 10 # fuel
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
primary = 5 # clad
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
variable = temp
tangential_tolerance = 1e-6
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
quadrature = true
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[clad_surface_temperature]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = clad_bc
[]
[Pressure]
# apply coolant pressure on clad outer walls
[coolantPressure]
boundary = '2'
factor = 15.517e6
function = pressure_ramp # use the pressure_ramp function defined above
displacements = 'disp_x'
[]
[]
[PlenumPressure]
# apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.62e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup = burnup
thermal_conductivity_model = NFIR
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
fuel_pin_geometry = pin_geometry
relocation_activation1 = 5000
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup = burnup
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
fission_rate = fission_rate
grain_radius = grain_radius
initial_porosity = 0.05
burnup = burnup
gbs_model = true
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 7.5e10
poissons_ratio = 0.3
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 300.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 20.0
variable = temp
[]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu'
line_search = 'none'
# controls for linear iterations
l_max_its = 100
l_tol = 1e-4 #8e-3
# controls for nonlinear iterations
nl_max_its = 50
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
# time control
start_time = -100
end_time = 141802226 #141798626+3600
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
iteration_window = 2
optimal_iterations = 10
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[Quadrature]
order = fifth
side_order = seventh
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[avg_clad_temp]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
execute_on = 'initial timestep_end'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = NodalExtremeValue
block = clad
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.81 # rod height
[]
[average_fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[FCT]
type = NodalVariableValue
variable = temp
nodeid = 231 # Global node id 232, at coordinates (0.0, 1.71774, 0.0)
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[max_penetration]
type = NodalExtremeValue
block = fuel
value_type = max
variable = penetration
[]
[min_penetration]
type = NodalExtremeValue
block = fuel
value_type = min
variable = penetration
[]
[max_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = max
variable = contact_pressure
[]
[min_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = min
variable = contact_pressure
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
## Nodal comparison values
[top_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 1654 #coords (0.0041275, 3.62274)
[]
[top_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 306 #coords (0.0042164, 3.62274)
[]
[plenum_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 351 #coords (0.0042164, 3.96053)
[]
[top_radial_strain_fuel]
type = ElementalVariableValue
variable = strain_xx
elementid = 787
[]
[top_axial_strain_fuel]
type = ElementalVariableValue
elementid = 787
variable = strain_yy
[]
[top_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 136
[]
[top_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 136
[]
[plenum_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 156
[]
[plenum_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 156
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[pellet_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 10
# sort_by = y
# outputs = 'outfile_fuel_surface_temp'
#[]
#[pellet_center_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 12
# sort_by = y
# outputs = 'outfile_FCT'
#[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[outfile_fuel_surface_temp]
# type = CSV
# execute_on = linear
#[]
#[outfile_FCT]
# type = CSV
# execute_on = linear
#[]
[console]
type = Console
max_rows = 25
[]
[]
(examples/temperature_tables/layered1D_cases/1pt5D.i)
#
# This calculation originates in CASL, where there was a need to compute a fuel
# temperature table to be used in another application.
#
# The set of calculations done here through the 'examples' file can be visually
# checked by running './create_temp_table.py files.txt' and examining the
# raw_data.png file. The temperatures in the plot increase with increasing
# linear heat rate. At 15 kW/ft, it appears that the high power and centerline
# temperature cause a small gap and a relatively low rod average fuel
# temperature. If the centerline temperature is plotted instead, the expected
# increase in temperature with increase in linear heat rate is clear.
#
initial_fuel_density = 10257.0
[GlobalParams]
density = ${initial_fuel_density}
initial_porosity = 0.05
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = disp_x
temperature = temp
volumetric_locking_correction = false
slice_heights = '0.03866 0.08211 0.08211 0.08211 0.08212 0.08211 0.08211 0.08211 0.0381 0.08065 0.08065 0.08065 0.08065 0.08065 0.08065 0.0381 0.08065 0.08065 0.08065 0.08065 0.08065 0.08065 0.0381 0.08065 0.08065 0.08065 0.08065 0.08065 0.08065 0.0381 0.08065 0.08065 0.08065 0.08065 0.08065 0.08065 0.0381 0.08065 0.08065 0.08065 0.08065 0.08065 0.08065 0.0381 0.079212 0.079212 0.079212 0.079212 0.079212 0.16152' #VERA_DEFINED <<VERA MODIFIED>>
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
[]
[Mesh]
coord_type = RZ
partitioner = centroid
centroid_partitioner_direction = y
patch_update_strategy = auto
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_mesh_density = customize
pellet_mesh_density = customize
clad_thickness = 0.00057
slices_per_block = 49
uniform_slice_heights = false
pellet_outer_radius = 0.004096
clad_gap_width = 8.4e-05
nx_p = 6
nx_c = 3
elem_type = EDGE3
bx_p = 0.5
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[terminator1]
type = Terminator
expression = 'burnup_EAV >= 0.0632'
[]
[terminator2]
type = Terminator
expression = 'plenum_pressure >= 1.55e7'
[]
[]
[Variables]
[temp]
initial_condition = 293.0
[]
[]
[AuxVariables]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[grain_radius]
block = fuel
initial_condition = 2.50e-06
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[vonmises]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain_rate]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[gas_swell]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[densification]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[volumetric_swelling_strain]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[relocation]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0.000000 10800 97200 500000000.000000'
# y = '0.000000 0.000000 16404.200000 16404.200000' #LHR5
scale_factor = 1
[]
[axial_peaking_factors]
type = PiecewiseBilinear
x = '0.00324 3.77797'
y = '0.000000 10800 97200 500000000.000000'
z = '1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000 1.000000'
axis = 1
scale_factor = 1
[]
[bc_temperature]
type = PiecewiseBilinear
x = '0.00324 3.77797'
y = '0.000000 10800 97200 500000000.000000'
z = '300.000000 300.000000 585.000000 585.000000 585.000000 585.000000 585.000000 585.000000'
axis = 1
[]
[pressure_ramp]
type = PiecewiseLinear
scale_factor = 1
x = '0 10800.0'
y = '0.00651 1.0'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 1.55132e+07
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
extra_vector_tags = 'ref'
[]
[heat_source]
type = NeutronHeatSource
variable = temp
extra_vector_tags = 'ref'
block = fuel
fission_rate = fission_rate
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuelthermal_strain fuel_swelling fuel_relocation'
extra_vector_tags = 'ref'
mesh_generator = layered1D_mesh
group_scalar_vars_in_reference_residual = true
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
extra_vector_tags = 'ref'
mesh_generator = layered1D_mesh
group_scalar_vars_in_reference_residual = true
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
num_radial = 80
num_axial = 100
order = CONSTANT
family = MONOMIAL
RPF = RPF
isotopes = 'U235 U238'
isotope_fractions = '0.001 0.999'
fuel_volume_ratio = 1.0
fuel_pin_geometry = pin_geometry
[]
[]
[AuxKernels]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
factor = 4.29768e13
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[grain_radius]
type = GrainRadiusAux
block = fuel
variable = grain_radius
temperature = temp
execute_on = linear
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[creep_strain]
type = MaterialRealAux
property = effective_creep_strain
variable = creep_strain
block = clad
execute_on = timestep_end
[]
[strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[creep_strain_rate]
type = MaterialRealAux
property = creep_rate
variable = creep_strain_rate
block = clad
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
block = fuel
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
block = fuel
[]
[densification]
type = MaterialRealAux
variable = densification
property = densification
execute_on = timestep_end
block = fuel
[]
[volumetric_swelling_strain]
type = MaterialRealAux
variable = volumetric_swelling_strain
property = volumetric_swelling_strain
execute_on = timestep_end
block = fuel
[]
[relocation_strain]
type = MaterialRealAux
variable = relocation
property = relocation_strain
execute_on = timestep_end
block = fuel
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
formulation = kinematic
model = frictionless
normalize_penalty = true
penalty = 5e13
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
variable = temp
primary = 5
secondary = 10
roughness_secondary = 1e-06
roughness_coef = 1.5
roughness_primary = 1e-06
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
initial_moles = initial_moles
gas_released = fis_gas_released
tangential_tolerance = 1.0e-4
# quadrature = true
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = 2
function = pressure_ramp
factor = 1.55132e+07
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 1.99948e+06
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles
temperature = plenum_temp
volume = gas_volume
material_input = fis_gas_released
output = plenum_pressure
[]
[]
[clad_coolant_surface]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = bc_temperature
[]
[]
[LayeredPlenumTemperature]
[plenum_temp]
boundary = 5
inner_surfaces = '5'
outer_surfaces = '10'
temperature = temp
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
thermal_conductivity_model = NFIR
temperature = temp
burnup_function = burnup
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup_function = burnup
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
burnup_relocation_stop = 0.017
relocation_activation1 = 5000.0
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation
fuel_pin_geometry = pin_geometry
[]
[fuel_thermal_strain]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 293.0
eigenstrain_name = fuelthermal_strain
[]
[fuel_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup_function = burnup
total_densification = 0.005
initial_fuel_density = 10257.0
eigenstrain_name = fuel_swelling
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
matpro_poissons_ratio = false
matpro_youngs_modulus = false
block = clad
[]
[stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'zrycreep'
block = clad
[]
[zrycreep]
type = ZryCreepLimbackHoppeUpdate
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = zirlo
block = clad
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 293.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6560.0
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
burnup_function = burnup
grain_radius = grain_radius
gbs_model = true
[]
[]
[Dampers]
[temp]
type = MaxIncrement
variable = temp
max_increment = 50
[]
[disp_x]
type = MaxIncrement
variable = disp_x
max_increment = 1e-5
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
verbose = true
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 5e-5
nl_abs_tol = 1e-10
start_time = -200
n_startup_steps = 1
end_time = 1e9
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 10
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = 0.5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[Predictor]
type = SimplePredictor
scale = 1.0
skip_times_old = '0 10800 97200'
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[average_clad_temp]
type = ElementAverageValue
block = clad
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = ElementExtremeValue
value_type = MAX
block = clad
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = ElementExtremeValue
value_type = MIN
block = clad
variable = temp
execute_on = 'initial timestep_end'
[]
[average_grain_radius]
type = ElementAverageValue
variable = grain_radius
block = fuel
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[_dt]
type = TimestepSize
[]
[nonlinear_its]
type = NumNonlinearIterations
[]
[linear_its]
type = NumLinearIterations
[]
[rod_average_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temp
execute_on = 'initial timestep_end'
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.6576
execute_on = 'initial timestep_end'
[]
[average_fission_rate]
type = AverageFissionRate
rod_ave_lin_pow = power_history
[]
[clad_hoop_stress_max]
type = ElementExtremeValue
value_type = MAX
variable = stress_zz
block = clad
execute_on = 'initial timestep_end'
[]
[clad_hoop_stress_min]
type = ElementExtremeValue
value_type = MIN
variable = stress_zz
block = clad
execute_on = 'initial timestep_end'
[]
[max_fuel_centerline_temp]
type = NodalExtremeValue
variable = temp
boundary = 12
execute_on = 'initial timestep_end'
[]
[max_fuel_surface_temp]
type = NodalExtremeValue
value_type = MAX
variable = temp
boundary = 10
execute_on = 'initial timestep_end'
[]
[max_gap_distance]
type = NodalExtremeValue
value_type = MAX
variable = penetration
boundary = 10
execute_on = 'initial timestep_end'
[]
[burnup_EAV]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[fission_gas_release]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[alive_time]
type = PerfGraphData
section_name = Root
data_type = TOTAL
[]
[]
[Outputs]
perf_graph = true
exodus = false
color = false
[csv]
type = CSV
execute_on = 'initial timestep_end'
[]
[chkfile]
type = CSV
show = 'fission_gas_release plenum_pressure rod_average_fuel_temp max_fuel_centerline_temp burnup_EAV'
sync_only = true
sync_times = '0 10800 97200'
[]
[]
(test/tests/layered_1D/radial_power_factor.i)
[GlobalParams]
density = 10431.0
displacements = disp_x
[]
[Mesh]
coord_type = RZ
use_displaced_mesh = false
[layered1D_mesh]
type = Layered1DMeshGenerator
include_clad = false
include_plenum = false
slices_per_block = 1
pellet_bottom_coor = 0
pellet_mesh_density = customize
fuel_height = 1
pellet_outer_radius = 0.0041
nx_p = 10
bx_p = 0.5
elem_type = EDGE2
[]
[]
[Functions]
[temp]
type = PiecewiseLinear
x = '0 7e7'
y = '1373.15 1473.15'
[]
[power]
type = ParsedFunction
expression = '20000'
[]
[axial_power_factor]
type = ParsedFunction
expression = '1'
[]
[]
[Variables]
[disp_x]
order = FIRST
family = LAGRANGE
[]
[temp]
order = FIRST
family = LAGRANGE
initial_condition = 1373.15
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
# Would normally supply 'burnup = burnup' to NeutronHeatSource.
# Give rod_ave_lin_pow instead to exercise a corner of code.
[nhs]
type = NeutronHeatSource
rod_ave_lin_pow = power
fuel_pin_geometry = pin_geometry
variable = temp
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[gps]
strain = small
incremental = true
planar_formulation = plane_strain
[]
[]
[Burnup]
[burnup]
block = fuel
order = FIRST
family = LAGRANGE
rod_ave_lin_pow = power
axial_power_profile = axial_power_factor
num_radial = 11
bias = 0.5
num_axial = 2
a_lower = 0
a_upper = 1.0
fuel_inner_radius = 0
fuel_outer_radius = 0.0041
fuel_volume_ratio = 1.0
N235 = N235
N236 = N236
N238 = N238
N239 = N239
N240 = N240
N241 = N241
N242 = N242
RPF = RPF
[]
[]
[BCs]
[ux]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[temp]
type = FunctionDirichletBC
variable = temp
boundary = 12
function = temp
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 1.0
poissons_ratio = 0.3
[]
[stress]
type = ComputeStrainIncrementBasedStress
block = fuel
[]
[thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup_function = burnup
initial_porosity = 0
thermal_conductivity_model = FINK_LUCUTA
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew '
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type'
petsc_options_value = '70 hypre boomeramg'
l_max_its = 60
nl_rel_tol = 1e-2
nl_abs_tol = 1e-2
l_tol = 1e-5
start_time = 0.0
dt = 100000
num_steps = 700
[]
[Outputs]
time_step_interval = 20
exodus = true
show = 'fission_rate burnup N235 N236 N238 N239 N240 N241 N242 RPF rod_input_power rod_total_power'
[console]
type = Console
max_rows = 25
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Postprocessors]
[rod_input_power]
type = FunctionValuePostprocessor
function = power
execute_on = 'initial timestep_end'
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_B/x441_1_5D_B.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_C/x441_1_5D_C.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(test/tests/mox_pore_velocity/MOXActinide_simple.i)
# This input files uses the actinide redistribution kernels
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.1
pellet_outer_radius = 0.0041
include_clad = false
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
[]
[]
[Variables]
[temperature]
initial_condition = 1400.0
[]
[actinide]
initial_condition = 20
scaling = 1e8
[]
[]
[AuxVariables]
[fission_rate_aux_variable_mox]
order = first
family = lagrange
[]
[pore]
[]
[]
[Functions]
[power_history1]
type = PiecewiseLinear
x = '0 10000'
y = '0 50000'
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temperature
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temperature
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temperature
block = fuel # fission rate applied to the fuel (block 2) only
fission_rate = fission_rate_aux_variable_mox
[]
[actinide_redistribution]
type = MOXActinideRedistribution
variable = actinide
debug = 0
temperature = temperature
scale_factor = 0.5
v_upper = 0
v_lower = 0
heating_function = power_history1
[]
[actinide_redistribution_enhancement]
type = MOXActinideRedistributionEnhancement
variable = actinide
debug = 0
temperature = temperature
pore = pore
pore_diameter = 1e-10
pore_thickness = 1e-11
scaling_parameter_A = 0.35
scale_factor = 0.5
v_upper = 0
v_lower = 0
heating_function = power_history1
[]
[actinide_time_derivative]
type = CoefTimeDerivative
variable = actinide
Coefficient = 1
[]
[]
[AuxKernels]
[fission_rate_aux_kernel_mox]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate_aux_variable_mox
block = fuel
porosity = pore
initial_porosity = 0.12
rod_ave_lin_pow = power_history1
pellet_diameter = 0.0082
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
[]
[pore]
type = ConstantAux
value = 0.12
variable = pore
[]
[]
[BCs]
[temp_outside] # pin pellets and clad along axis of symmetry (y)
type = DirichletBC
variable = temperature
boundary = 10
value = 1400
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
block = fuel
temperature = temperature
porosity = pore
[]
[density_block]
type = GenericConstantMaterial
block = fuel
prop_names = density
prop_values = 10431.0
[]
[pore_velocity]
type = ParsedMaterial
block = fuel
expression = '1e-2'
property_name = pore_velocity
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temperature
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package' # -mat_superlu_dist_fact'
petsc_options_value = 'lu superlu_dist' # SamePattern_SameRowPerm'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 25
nl_rel_tol = 1e-5
nl_abs_tol = 1e-8 #1e-10
n_startup_steps = 1
end_time = 8e4
num_steps = 2
dtmax = 1000
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 2e2
optimal_iterations = 8
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history1
[]
[]
[Postprocessors]
[_dt] # time step
type = TimestepSize
[]
[z_nonlinear_its] # number of nonlinear iterations at each timestep
type = NumNonlinearIterations
[]
[power_input]
type = FunctionValuePostprocessor
function = power_history1
scale_factor = 0.1 # rod height
[]
[rod_total_power_mox]
type = LayeredElementIntegralPowerPostprocessor
variable = temperature
block = fuel
fission_rate = fission_rate_aux_variable_mox
fuel_pin_geometry = pin_geometry
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temperature
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temperature
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_actinide]
type = NodalExtremeValue
variable = actinide
block = fuel
execute_on = 'initial timestep_end'
[]
[min_actinide]
type = NodalExtremeValue
variable = actinide
block = fuel
value_type = min
execute_on = 'initial timestep_end'
[]
[average_actinide]
type = AverageNodalVariableValue
variable = actinide
block = fuel
execute_on = 'initial timestep_end'
[]
[]
# The MOX capabilities are under active development and the blocks below are useful for
# development and debugging by providing the profiles of the desired quantities.
# They are commented out for the tests, as it would unnecessarily increase computational costs
# and memory requirements.
# [VectorPostprocessors]
# [line_value_vector_postprocessor_pore]
# type = LineValueSampler
# variable = pore
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# control_tags = a
# []
# [line_value_vector_postprocessor_pore_speed]
# type = LineValueSampler
# variable = pore_speed_aux
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_temperature]
# type = LineValueSampler
# variable = temperature
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# [line_value_vector_postprocessor_actinide]
# type = LineValueSampler
# variable = actinide
# start_point = '0.0 0.05 0'
# end_point = '0.0041 0.05 0'
# num_points = 100
# sort_by = x
# execute_on = linear
# outputs = stuff_v_rad
# []
# []
[Outputs]
exodus = true
csv = false
color = false
[console]
type = Console
max_rows = 25
all_variable_norms = true
[]
# [stuff_v_rad]
# type = CSV
# execute_on = 'FINAL'
# []
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/MOX/JOYO/B14/PTM002/analysis/b14_ptm002_1D_sample2.i)
# Sample at +97mm from midplane
initial_fuel_density = 11057.75
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.002675
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.1372
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 36350.6 36350.6 40436.1 40436.1 49235.7 49235.7 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1315'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1372
rod_ave_lin_pow = power_history
pellet_diameter = 0.00535
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.982
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.002675 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(examples/pore_migration/paper_solid.i)
[GlobalParams]
displacements = disp_x
temperature = temp
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[gps_uo] # this user object is to provide values for residual and diagonal jacobian in the scalar kernel GeneralizedPlaneStrain
type = GeneralizedPlaneStrainUserObject
out_of_plane_pressure_function = pressure_ramp
[]
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 0.1
pellet_outer_radius = 0.002675
include_clad = false
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
[]
[]
[Variables]
[temp]
initial_condition = 630
[]
[pore]
initial_condition = 0.15
scaling = 1e14
[]
[disp_x]
scaling = 0.1
[]
[scalar_strain_yy] # define scalar out-of-plane variable
order = FIRST
family = SCALAR
scaling = 100
[]
[]
[AuxVariables]
[pore_speed_aux]
order = constant
family = monomial
[]
[fission_rate_aux_variable]
order = first
family = lagrange
[]
[fission_rate_aux_variable_mox]
order = first
family = lagrange
[]
[grad_temp_x]
order = CONSTANT
family = MONOMIAL
[]
[thermal_conductivity]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[]
[Functions]
[power_history1]
type = PiecewiseLinear
x = '0 10000'
y = '0 50000'
[]
[fuel_surface_temp]
type = PiecewiseLinear
x = '0 10000'
y = '630 1300'
[]
[pressure_ramp]
type = PiecewiseLinear
x= '0 10000'
y = '200000 400000'
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie] # time term in heat conduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source] # source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel (block 2) only
fission_rate = fission_rate_aux_variable_mox
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history1
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history1
v_upper = 1e-12
v_lower = 1e-20
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
[]
[disp_x]
type = StressDivergenceRZTensors
variable = disp_x
component = 0
displacements = disp_x
use_displaced_mesh = true
[]
[gps_off_diag] # to provide off-diagonal jacobian entries for coupled variables with scalar_out_of_plane_strain
type = GeneralizedPlaneStrainOffDiag
variable = disp_x
scalar_out_of_plane_strain = scalar_strain_yy
displacements = disp_x
temperature = temp
eigenstrain_names = eigenstrain
[]
[]
[ScalarKernels]
[gps_diag] # use values calculated in GeneralizedPlaneStrainUserObject to construct residual and diagonal jacobian for scalar_out_of_plane_strain
type = GeneralizedPlaneStrain
variable = scalar_strain_yy
generalized_plane_strain = gps_uo
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate_aux_kernel]
type = FissionRateGeneral
fission_rate_formulation = LWR
variable = fission_rate_aux_variable
block = fuel
rod_ave_lin_pow = power_history1
pellet_diameter = 0.00535
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
value = 1.0
[]
[fission_rate_aux_kernel_mox]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate_aux_variable_mox
block = fuel
porosity = pore
initial_porosity = 0.15
rod_ave_lin_pow = power_history1
pellet_diameter = 0.00535
pellet_inner_diameter = 0
energy_per_fission = 3.2e-11
execute_on = 'initial timestep_end'
value = 1.0
[]
[grad_temp_x_aux]
type = VariableGradientComponent
variable = grad_temp_x
component = x
gradient_variable = temp
execute_on = 'initial timestep_end'
[]
[ThermalConductivityAux]
type = MaterialRealAux
block = fuel
execute_on = linear
property = thermal_conductivity
variable = thermal_conductivity
[]
[]
[BCs]
[temp_outside]
type = FunctionDirichletBC
variable = temp
boundary = 10
function = fuel_surface_temp
[]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[fuelPressure]
boundary = 10
function = pressure_ramp
[]
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
block = fuel
temperature = temp
porosity = pore
porosity_limit = 0.95
[]
[density_block]
type = GenericConstantMaterial
block = fuel
prop_names = density
prop_values = 10662.0
[]
[pore_velocity]
type = MOXPoreVelocity
block = fuel
temperature = temp
limit = 1e-3
scale_factor = 0.1
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_strain]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_strain]
type = ComputeAxisymmetric1DIncrementalStrain
block = fuel
displacements = 'disp_x'
eigenstrain_names = 'fuel_thermal_strain'
scalar_out_of_plane_strain = scalar_strain_yy
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 100.0
variable = temp
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-8#1e-5
nl_abs_tol = 1e-8#1e-6 #1e-8 #1e-10
end_time = 10000
dtmax = 100
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history1
[]
[]
[Postprocessors]
[_dt] # time step
type = TimestepSize
[]
[z_nonlinear_its] # number of nonlinear iterations at each timestep
type = NumNonlinearIterations
[]
[a_run_time] # average temperature of cladding interior
type = PerfGraphData
section_name = Root
data_type = TOTAL
[]
[ave_fuel_temp]
type = ElementAverageValue
block = fuel
variable = temp
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[ave_fission_rate]
type = ElementAverageValue
block = fuel
variable = fission_rate_aux_variable
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
block = fuel
fission_rate = fission_rate_aux_variable
fuel_pin_geometry = pin_geometry
[]
[rod_total_power_mox]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
block = fuel
fission_rate = fission_rate_aux_variable_mox
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history1
scale_factor = 0.1 # rod height
[]
[ave_themal_conductivity]
type = ElementAverageValue
block = fuel
variable = thermal_conductivity
[] # end element average burnup
[]
[VectorPostprocessors]
[Pore]
type = LineValueSampler
variable = pore
start_point = '0.0 0.05 0'
end_point = '0.002675 0.05 0'
num_points = 100
sort_by = x
execute_on = linear
outputs = line_plot
control_tags = a
[]
[gradT]
type = LineValueSampler
variable = grad_temp_x
start_point = '0.0 0.05 0'
end_point = '0.002675 0.05 0'
num_points = 100
sort_by = x
execute_on = linear
outputs = line_plot
[]
[Pore_Speed]
type = LineValueSampler
variable = pore_speed_aux
start_point = '0.0 0.05 0'
end_point = '0.002675 0.05 0'
num_points = 100
sort_by = x
execute_on = linear
outputs = line_plot
[]
[Temp]
type = LineValueSampler
variable = temp
start_point = '0.0 0.05 0'
end_point = '0.002675 0.05 0'
num_points = 100
sort_by = x
execute_on = linear
outputs = line_plot
[]
[Thermal_Conductivity]
type = LineValueSampler
variable = thermal_conductivity
start_point = '0.0 0.05 0'
end_point = '0.002675 0.05 0'
num_points = 100
sort_by = x
execute_on = linear
outputs = line_plot
[]
[Fission_Rate]
type = LineValueSampler
variable = fission_rate_aux_variable_mox
start_point = '0.0 0.05 0'
end_point = '0.002675 0.05 0'
num_points = 100
sort_by = x
execute_on = linear
outputs = line_plot
[]
[]
[Outputs]
perf_graph = true
exodus = false
color = false
[console]
type = Console
max_rows = 25
all_variable_norms = true
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
# sync_only = true
# sync_times = '7500 8000 8500 9000 9500 10000'
file_base = 1d
[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/group_H/x441_1_5D_H.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = 15800
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ022/TSQ022_1pt5.i)
# Model is of a 10 slice pellet stack in 1.5D
# Top plenum height of 213.45 mm + bot_gap_height = 1.e-3 in 2D mesh
initial_fuel_density = 10431
[GlobalParams]
density = ${initial_fuel_density} #95% of TD (TD assumed to be 10980)
displacements = disp_x
temperature = temp
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = false
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0011684 #annular pellets
pellet_outer_radius = 0.0041275
clad_gap_width = 8.89e-5
clad_thickness = 6.35e-4
fuel_height = 3.81381
plenum_height = 0.21445
slices_per_block = 10
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 300.0 # set initial temp to ambient
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 8.892e-6 # ((11.1+10.9+12.2)/3)/2*1.56
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads an input file containing rod average linear power vs time
data_file = TSQ022_alhr.csv
format = columns
[]
[axial_peaking_factors]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ022_alhr_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp]
# reads an input data defining amplitude curve for coolant pressure
type = PiecewiseLinear
x = '-100 0 141789874 141793474' # -100 @ 101326 Pa, 0 to 141789874 @ 15.517 MPa, 141793474 @ 101326 Pa
y = '.00653 1 1 .00653'
[]
[flux]
type = PiecewiseLinear
data_file = TSQ022_fast_flux.csv
format = columns
[]
[clad_wall_temp]
type = PiecewiseLinear
data_file = TSQ022_clad_temp.csv
format = columns
[]
[axial_clad_peaking]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ022_clad_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[clad_bc]
type = CompositeFunction
functions = 'clad_wall_temp axial_clad_peaking'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.517e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie]
# time term in heat cnduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
# source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate # coupling to the fission_rate aux variable
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain
fuel_volumetric_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress
strain_xx strain_xy strain_yy strain_zz'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress
strain_xx strain_xy strain_yy strain_zz creep_strain_xx creep_strain_xy
creep_strain_yy creep_strain_zz'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
num_radial = 80
num_axial = 11
a_lower = 0.00324 # checked with paraview
a_upper = 3.81705 # checked with paraview
fuel_outer_radius = .0041275 # checked with paraview
fuel_inner_radius = .0011684 # Checked with paraview
isotopes = 'U235 U238 Pu239 Pu240 Pu241 Pu242'
isotope_fractions = '0.0348 0.9652 0 0 0 0'
fuel_volume_ratio = 1.0
order = Constant
family = MONOMIAL
RPF = RPF
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
function = flux
factor = 1
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[stress_xx] # computes stress components for output
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises_stress
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[hydrostatic_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = hydrostatic_stress
scalar_type = VonMisesStress
execute_on = timestep_end
block = fuel
[]
[creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
block = clad
execute_on = timestep_end
[]
[creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_zz]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_zz
index_i = 2
index_j = 2
block = clad
execute_on = timestep_end
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5 # clad
secondary = 10 # fuel
formulation = kinematic # #changed to match 1.5d example problem
penalty = 1e9
model = frictionless
#normal_smoothing_distance = 0.1 # This option does not play nicely with 1.5D
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
secondary = 10 # fuel
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
primary = 5 # clad
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
variable = temp
tangential_tolerance = 1e-6
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
quadrature = true
#normal_smoothing_distance = 0.1 # This option does not play nicely with 1.5D
[]
[]
[BCs]
# No displacement boundary conditions are necessary for annular pellets because of the
# axisymmetric stress divergence which creates the additional constraint
[clad_surface_temperature]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = clad_bc
[]
[Pressure]
# apply coolant pressure on clad outer walls
[coolantPressure]
boundary = '2'
function = pressure_ramp # use the pressure_ramp function defined above
factor = 15.517e6
displacements = 'disp_x'
[]
[]
[PlenumPressure]
# apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.62e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup = burnup
thermal_conductivity_model = NFIR
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
diameter = 0.008255
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
diametral_gap = 0.0001778
relocation_activation1 = 5000
burnup_relocation_stop = 0.029
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup = burnup
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
fission_rate = fission_rate
grain_radius = grain_radius
initial_porosity = 0.05
burnup = burnup
gbs_model = true
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ZryElasticityTensor
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 300.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 20.0
variable = temp
[]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
line_search = 'none'
# controls for linear iterations
l_max_its = 100
l_tol = 1e-3
# controls for nonlinear iterations
nl_max_its = 100
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
# time control
start_time = -100
end_time = 141793474 #141789874+3600
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
iteration_window = 2
optimal_iterations = 10
[]
[Quadrature]
order = fifth
side_order = seventh
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[avg_clad_temp]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
execute_on = 'initial timestep_end'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = NodalExtremeValue
block = clad
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.81381 # rod height
[]
[average_fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[FCT]
type = NodalVariableValue
nodeid = 264 #coords (0.0, 2.10084)
variable = temp
execute_on = 'initial timestep_end'
[]
[FCT_slice4]
type = NodalVariableValue
nodeid = 231 #coords (0.0, 1.71945)
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
## Nodal comparison values
[gap_slice6]
type = NodalVariableValue
variable = penetration
nodeid = 328 #coords (0.0041275, 2.48222)
[]
[gap]
type = NodalVariableValue
variable = penetration
nodeid = 295 #coords (0.0041275, 2.10084)
[]
[gap_slice4]
type = NodalVariableValue
variable = penetration
nodeid = 262 #coords (0.0041275, 1.71945)
[]
[contact_pressure_slice6]
type = NodalVariableValue
variable = contact_pressure
nodeid = 328 #coords (0.0041275, 2.48222)
[]
[contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 295 #coords (0.0041275, 2.10084)
[]
[contact_pressure_slice4]
type = NodalVariableValue
variable = contact_pressure
nodeid = 262 #coords (0.0041275, 1.71945)
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
[chkfile]
type = CSV
show = 'average_burnup fis_gas_percent FCT rod_total_power'
execute_on = 'FINAL'
[]
[console]
type = Console
max_rows = 25
[]
[]
(assessment/MOX/JOYO/B14/PTM001/analysis/b14_ptm001_1D_sample1.i)
# Sample at +33 mm from the midplane
initial_fuel_density = 11057.75
[GlobalParams]
density = ${initial_fuel_density}
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
fuel_height = 10e-3
pellet_outer_radius = 0.0027
pellet_bottom_coor = 0.0
pellet_mesh_density = customize
nx_p = 200
elem_type = EDGE2
slices_per_block = 1
include_plenum = false
include_clad = false
[]
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
include_clad = false
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 295.0
[]
[pore]
initial_condition = 0.1372
scaling = 1e14
block = fuel
[]
[]
[AuxVariables]
[fission_rate]
[]
[burnup]
[]
[pore_speed_aux]
order = constant
family = monomial
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '-200 0 72000 158040 160200 246600 248400 249000.012 251280'
y = '0 0 39137.6 39137.6 43536.4 43536.4 53010.6 53010.6 0'
[]
[f_temp_out_fuel]
type = PiecewiseLinear
x = '-200 0 251280'
y = '295 295 1156'
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
fission_rate = fission_rate
[]
[pore_continuity]
type = MOXPoreContinuity
variable = pore
temperature = temp
debug = 0
alpha = 0.25
beta = 1
heating_function = power_history
block = fuel
[]
[pore_diffusion]
type = MOXPoreDiffusion
variable = pore
debug = 0
nu = 1e-12
heating_function = power_history
v_upper = 1e-12
v_lower = 1e-20
block = fuel
[]
[poretimederivative]
type = CoefTimeDerivative
variable = pore
Coefficient = 1
block = fuel
[]
[]
[AuxKernels]
[pore_speed_aux]
type = MaterialRealAux
variable = pore_speed_aux
property = pore_velocity
block = fuel
execute_on = 'initial timestep_end'
[]
[fission_rate]
type = FissionRateGeneral
fission_rate_formulation = MOX
variable = fission_rate
block = fuel
initial_porosity = 0.1372
rod_ave_lin_pow = power_history
pellet_diameter = 0.0054
execute_on = timestep_begin
porosity = pore
energy_per_fission = 3.2e-11
[]
[burnup]
type = BurnupAux
block = fuel
fission_rate = fission_rate
variable = burnup
execute_on = timestep_begin
[]
[]
[BCs]
[temp_fuel_outside]
type = FunctionDirichletBC
variable = temp
function = f_temp_out_fuel
boundary = 10
[]
[]
[Materials]
[fuel_thermal]
type = MAMOXThermal
temperature = temp
porosity = pore
block = fuel
Am_content = 0.0237
oxy_to_metal_ratio = 1.982
[]
[fuel_density]
type = ParsedMaterial
block = fuel
property_name = density
expression = ${initial_fuel_density}
[]
[pore_velocity]
type = MOXPoreVelocity
temperature = temp
limit = 1e-3
scale_factor = 0.1
block = fuel
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Dampers]
[bound]
type = BoundingValueNodalDamper
max_value = 1
min_value = 0
variable = pore
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
line_search = 'none'
l_max_its = 50
l_tol = 8e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-5
start_time = -200
n_startup_steps = 1
end_time = 251280
dtmax = 10000
dtmin = 0.25
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
optimal_iterations = 15
iteration_window = 2
linear_iteration_ratio = 100
growth_factor = 2
cutback_factor = .5
force_step_every_function_point = true
timestep_limiting_function = power_history
[]
[]
[Postprocessors]
[ave_temp_interior]
type = ElementAverageValue
variable = temp
execute_on = 'initial linear'
[]
[average_burnup]
type = ElementAverageValue
variable = burnup
[]
[ave_pore]
type = ElementAverageValue
block = fuel
variable = pore
[]
[max_pore]
type = NodalExtremeValue
block = fuel
value_type = max
variable = pore
[]
[min_pore]
type = NodalExtremeValue
block = fuel
value_type = min
variable = pore
[]
[max_pore_speed]
type = ElementExtremeValue
block = fuel
value_type = max
variable = pore_speed_aux
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 10e-3 # rod height
[]
[]
[VectorPostprocessors]
[fuel_radial_temperature_Sample]
type = LineValueSampler
variable = temp
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[radial_porosity_Sample]
type = LineValueSampler
variable = pore
start_point = '0.0 0.005 0.0'
end_point = '0.0027 0.005 0.0'
num_points = 200
execute_on = final
sort_by = x
outputs = line_plot
[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
exodus = true
color = true
csv = true
[console]
type = Console
max_rows = 25
[]
[line_plot]
type = CSV
execute_on = 'FINAL'
time_step_interval = 1
file_base = 1d
create_final_symlink = true
[]
[chkfile]
type = CSV
execute_on = FINAL
show = 'ave_temp_interior max_pore'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(assessment/metallic_fuel/EBRII/X441/analysis/x441_base_1_5D.i)
initial_fuel_density = 15800.0
[GlobalParams]
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x'
[]
[Mesh]
coord_type = RZ
# Nominal Design Geometric Parameters (X441)
[layered1D_mesh]
type = Layered1DMeshGenerator
clad_thickness = ${clad_thickness}
pellet_outer_radius = ${pellet_outer_radius}
fuel_height = ${pellet_height}
plenum_height = ${clad_top_gap_height}
clad_gap_width = ${clad_gap_width}
# meshing parameters
clad_mesh_density = customize
pellet_mesh_density = customize
nx_p = 6
nx_c = 4
slices_per_block = 10
elem_type = EDGE2
[]
# mesh options
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
[disp_y]
[]
[disp_z]
[]
# Aux variables for output
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[solid_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[gas_swell]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '0 44722 44722 0'
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 42000400'
y = '1.0 1.0'
[]
[coolant_temp_ramp]
type = PiecewiseLinear
x = '0 1e5 41990400 42000400'
y = '298.0 648.0 648.0 350.0'
[]
[axial_peaking_factors]
type = PowerPeakingFunction
fit = EBRII_ROW_4
pellet_length = ${pellet_height}
pellet_y_start = ${pellet_y_start}
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = coolant_press_ramp
coolant_pressure_scaling_factor = 0.151e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Physics/SolidMechanics/Layered1D]
[fuel]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = fuel_axial_pressure
generate_output = 'effective_creep_strain stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = fuel
eigenstrain_names = 'fuel_thermal_strain gas_swelling_eigenstrain solid_swelling_eigenstrain'
mesh_generator = layered1D_mesh
[]
[clad]
strain = FINITE
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
out_of_plane_pressure_function = clad_axial_pressure
generate_output = 'effective_creep_strain stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
block = clad
eigenstrain_names = 'clad_thermal_eigenstrain'
mesh_generator = layered1D_mesh
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[heat]
type = HeatConduction
variable = temp
[]
[heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
type = NeutronHeatSource
variable = temp
block = fuel
fission_rate = fission_rate
[]
[]
[AuxKernels]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[gas_swell]
type = MaterialRealAux
variable = gas_swell
property = gas_swelling
execute_on = timestep_end
[]
[solid_swell]
type = MaterialRealAux
variable = solid_swell
property = solid_swelling
execute_on = timestep_end
[]
[volumetric_strain]
type = RankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = RankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[hoop_elastic_strain]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[total_hoop_strain]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = clad
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5
secondary = 10
penalty = 1e12
model = frictionless
formulation = kinematic
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = 5
secondary = 10
quadrature = true
gap_conductivity = 61.0
min_gap = ${clad_gap_width}
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[Pressure]
[coolantPressure]
boundary = '2'
function = coolant_press_ramp
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 9
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fis_gas_released
[]
[]
[]
[CoolantChannel]
[convective_clad_surface]
boundary = '2'
variable = temp
inlet_temperature = coolant_temp_ramp
inlet_pressure = coolant_press_ramp
inlet_massflux = 5261.5 # kg/m^2-sec
coolant_material = sodium
rod_diameter = 5.84e-3 # m
rod_pitch = 7.48e-3 # m (Pitch-to-diameter Ratio = 1.28)
linear_heat_rate = power_history
axial_power_profile = axial_peaking_factors
subchannel_geometry = triangular
[]
[]
[Materials]
[fission_rate]
type = UPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${pellet_outer_radius}
X_Zr = ${X_Zr}
X_Pu_function = ${X_Pu}
block = fuel
outputs = all
[]
[burnup]
type = UPuZrBurnup
initial_X_Zr = ${X_Zr}
initial_X_Pu = ${X_Pu}
density = ${initial_fuel_density}
block = fuel
outputs = all
[]
[fuel_elasticity_tensor]
type = UPuZrElasticityTensor
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
block = fuel
temperature = temp
[]
[fuel_inelastic_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep'
block = fuel
[]
[fuel_upuzrcreep]
type = UPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 1e-3
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
[]
[gas_swelling]
type = UPuZrGaseousEigenstrain
temperature = temp
eigenstrain_name = gas_swelling_eigenstrain
initial_porosity = 0.0
bubble_number_density = 1e20
outputs = all
output_properties = 'porosity gaseous_porosity'
block = fuel
[]
[solid_swelling]
type = BurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
[]
[metal_fuel_thermal]
type = UPuZrThermal
block = fuel
X_Zr = ${X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_behavior]
type = UPuZrFissionGasRelease
block = fuel
fission_rate = fission_rate
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.88e11
poissons_ratio = 0.236
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = nonlinear
inelastic_models = 'clad_ht9creep'
block = clad
[]
[fast_flux]
type = FastNeutronFlux
block = clad
factor = 2.47e19
[]
[clad_ht9creep]
type = HT9CreepUpdate
block = clad
temperature = temp
[]
[thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = clad
thermal_expansion_coeff = 1.2e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[clad_thermal]
type = HT9Thermal
block = clad
temperature = temp
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 7874.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 60
l_tol = 8e-3
nl_max_its = 40
nl_rel_tol = 5e-4
nl_abs_tol = 1e-7
end_time = 42000400
dtmin = 100
dtmax = 5e5
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = creep_timestep
dt = 1e2
time_t = '0 1e5 41990400 42000400'
time_dt = '1e2 1e2 1e2 1e2'
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[ave_temp_interior] # average temperature of the cladding interior and all pellet exteriors
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol] # volume inside of cladding
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[pellet_volume] # fuel pellet total volume
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
execute_on = 'initial linear'
#outputs = exodus
[]
[avg_clad_temp] # average temperature of cladding interior
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
fuel_pin_geometry = pin_geometry
execute_on = 'initial linear'
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
out_of_plane_strain = strain_yy
fuel_pin_geometry = pin_geometry
addition = ${gas_addition}
[]
[flux_from_clad] # area integrated heat flux from the cladding
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel] # area integrated heat flux from the fuel
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = 12
variable = temp
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
[]
[ave_FST]
type = SideAverageValue
boundary = 10
variable = temp
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
[]
[ave_CIT]
type = SideAverageValue
boundary = 5
variable = temp
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = clad
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = 10
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = 10
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[fis_gas_produced]
type = LayeredElementIntegralFisGasProducePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasePostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
execute_on = 'initial timestep_end'
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
[]
[solid_swelling]
type = ElementAverageValue
variable = solid_swell
block = fuel
[]
[gas_swelling]
type = ElementAverageValue
variable = gas_swell
block = fuel
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[gaseous_porosity]
type = ElementAverageValue
variable = gaseous_porosity
block = fuel
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_produced
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = clad
variable = hoop_creep_strain
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = clad
variable = total_hoop_strain
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'vec1'
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = 12
sort_by = y
outputs = 'vec2'
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = 10
sort_by = y
outputs = 'vec3'
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = 5
sort_by = y
outputs = 'vec4'
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = 2
sort_by = y
outputs = 'vec5'
[]
[fuel_surf_disp_x]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'vec7'
[]
[]
[PerformanceMetricOutputs]
outputs = performance_metrics_file
[]
[Outputs]
time_step_interval = 10
color = true
exodus = true
perf_graph = true
csv = true
sync_times = '1e3 5e3 1e4 5e4 1e5 5e6 1e6 5e6 1e7 2e7 3e7 4e7 41990400 41991000'
file_base = x441_${group_name}_1_5D
[out2]
type = CSV
file_base = x441_${group_name}_1_5D_out2
time_step_interval = 1
[]
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
[]
[chkfile]
type = CSV
file_base = x441_${group_name}_1_5D_chkfile
show = 'max_approx_FCT max_ave_FST max_ave_CIT average_burnup fis_gas_percent max_clad_hoop_creep max_total_hoop_strain'
execute_on = 'FINAL'
[]
[performance_metrics_file]
type = CSV
file_base = x441_${group_name}_1_5D_performance_metrics
show = 'simulation_alive_time number_linear_iterations number_nonlinear_iterations time_step_size total_linear_iterations total_nonlinear_iterations physical_memory_use number_dofs number_nonlinear_variables residual_compute_time jacobian_compute_time'
[]
[vec1]
type = CSV
file_base = x441_${group_name}_1_5D_vec1
execute_on = 'FINAL'
[]
[vec2]
type = CSV
file_base = x441_${group_name}_1_5D_vec2
execute_on = 'FINAL'
[]
[vec3]
type = CSV
file_base = x441_${group_name}_1_5D_vec3
execute_on = 'FINAL'
[]
[vec4]
type = CSV
file_base = x441_${group_name}_1_5D_vec4
execute_on = 'FINAL'
[]
[vec5]
type = CSV
file_base = x441_${group_name}_1_5D_vec5
execute_on = 'FINAL'
[]
[vec7]
type = CSV
file_base = x441_${group_name}_1_5D_vec7
execute_on = 'FINAL'
[]
[]
[Debug]
show_var_residual = 'disp_x temp'
show_var_residual_norms = true
[]
(assessment/LWR/validation/US_PWR_16_x_16/analysis/TSQ002/RefinementStudy/TSQ002_1pt5_hundredslice.i)
# Model is of a 10 slice pellet stack in 1.5D
# Top plenum height of 295.07 mm + bot_gap_height = 1.e-3 in 2D mesh
initial_fuel_density = 10431
[GlobalParams]
density = ${initial_fuel_density} #95% of TD (TD assumed to be 10980)
displacements = disp_x
temperature = temp
order = SECOND
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = false
[]
[Mesh]
coord_type = RZ
[layered1D_mesh]
type = Layered1DMeshGenerator
pellet_inner_radius = 0.0
pellet_outer_radius = 0.0041275
clad_gap_width = 8.89e-5
clad_thickness = 6.35e-4
fuel_height = 3.81381
plenum_height = 0.29607
slices_per_block = 100
[]
patch_update_strategy = auto
partitioner = centroid
centroid_partitioner_direction = y
[]
[UserObjects]
[pin_geometry]
type = Layered1DFuelPinGeometry
mesh_generator = layered1D_mesh
[]
[]
[Variables]
[temp]
initial_condition = 300.0 # set initial temp to ambient
[]
[]
[AuxVariables]
[grain_radius]
block = fuel
initial_condition = 8.7945e-6 # ((11.6+11.2+11.2+11.1)/4)/2*1.56
[]
[fast_neutron_flux]
block = clad
[]
[fast_neutron_fluence]
block = clad
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[vonmises_stress]
order = CONSTANT
family = MONOMIAL
[]
[hydrostatic_stress]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[creep_strain_xx]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_xy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_yy]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[creep_strain_zz]
order = CONSTANT
family = MONOMIAL
block = clad
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[power_history]
type = PiecewiseLinear # reads an input file containing rod average linear power vs time
data_file = TSQ002_alhr.csv
format = columns
[]
[axial_peaking_factors]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_alhr_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[pressure_ramp]
# reads an input data defining amplitude curve for coolant pressure
type = PiecewiseLinear
x = '-100 0 141798626 141802226' # -100 @ 101326 Pa, 0 to 141798626 @ 15.517 MPa, 141802226 @ 101326 Pa
y = '.00653 1 1 .00653'
[]
[flux]
type = PiecewiseLinear
data_file = TSQ002_fast_flux.csv
format = columns
[]
[clad_wall_temp]
type = PiecewiseLinear
data_file = TSQ002_clad_temp.csv
format = columns
[]
[axial_clad_peaking]
# reads an input file containing the axial power profile vs time
type = PiecewiseBilinear
data_file = TSQ002_clad_peaking.csv
axis = 1 # (0,1,2) => (x,y,z)
[]
[clad_bc]
type = CompositeFunction
functions = 'clad_wall_temp axial_clad_peaking'
[]
[clad_axial_pressure]
type = CladdingAxialPressureFunction
plenum_pressure = plenum_pressure
coolant_pressure = pressure_ramp
coolant_pressure_scaling_factor = 15.517e6
fuel_pin_geometry = pin_geometry
[]
[fuel_axial_pressure]
type = ParsedFunction
expression = plenum_pressure
symbol_names = plenum_pressure
symbol_values = plenum_pressure
[]
[]
[Kernels]
[heat] # gradient term in heat conduction equation
type = HeatConduction
variable = temp
[]
[heat_ie]
# time term in heat cnduction equation
type = HeatConductionTimeDerivative
variable = temp
[]
[heat_source]
# source term in heat conduction equation
type = NeutronHeatSource
variable = temp
block = fuel # fission rate applied to the fuel only
fission_rate = fission_rate # coupling to the fission_rate aux variable
[]
[]
[Physics]
[SolidMechanics]
[Layered1D]
[fuel]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = fuel
out_of_plane_pressure_function = fuel_axial_pressure
strain = finite
eigenstrain_names = 'fuel_thermal_strain fuel_relocation_strain fuel_volumetric_strain'
mesh_generator = layered1D_mesh
[]
[clad]
add_variables = true
add_scalar_variables = true
out_of_plane_strain_name = strain_yy
fuel_pin_geometry = pin_geometry
block = clad
out_of_plane_pressure_function = clad_axial_pressure
strain = finite
eigenstrain_names = 'clad_thermal_eigenstrain clad_irradiation_strain'
mesh_generator = layered1D_mesh
[]
[]
[]
[]
[Burnup]
[burnup]
block = fuel
rod_ave_lin_pow = power_history # using the power function defined above
axial_power_profile = axial_peaking_factors # using the axial power profile function defined above
fuel_pin_geometry = pin_geometry
isotopes = 'U235 U238 Pu239 Pu240 Pu241 Pu242'
isotope_fractions = '0.0348 0.9652 0 0 0 0'
fuel_volume_ratio = 1.0
RPF = RPF
[]
[]
[AuxKernels]
[GrainRadiusAux]
block = fuel
execute_on = linear
temperature = temp
type = GrainRadiusAux
variable = grain_radius
[]
[fast_neutron_flux]
type = FastNeutronFluxAux
variable = fast_neutron_flux
block = clad
function = flux
factor = 1
execute_on = timestep_begin
[]
[fast_neutron_fluence]
type = FastNeutronFluenceAux
variable = fast_neutron_fluence
block = clad
fast_neutron_flux = fast_neutron_flux
execute_on = timestep_begin
[]
[stress_xx] # computes stress components for output
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[vonmises_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises_stress
scalar_type = VonMisesStress
execute_on = timestep_end
[]
[hydrostatic_stress]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = hydrostatic_stress
scalar_type = VonMisesStress
execute_on = timestep_end
block = fuel
[]
[strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
block = clad
execute_on = timestep_end
[]
[creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
block = clad
execute_on = timestep_end
[]
[creep_strain_zz]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_zz
index_i = 2
index_j = 2
block = clad
execute_on = timestep_end
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = 10
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = 5 # clad
secondary = 10 # fuel
formulation = kinematic
penalty = 1e7
model = frictionless
[]
[]
[ThermalContact]
[thermal_contact]
type = GasGapHeatTransfer
secondary = 10 # fuel
initial_moles = initial_moles # coupling to a postprocessor which supplies the initial plenum/gap gas mass
primary = 5 # clad
gas_released = fis_gas_released # coupling to a postprocessor which supplies the fission gas addition
variable = temp
tangential_tolerance = 1e-6
roughness_coef = 3.2
roughness_secondary = 1e-6
roughness_primary = 2e-6
jump_distance_model = LANNING
plenum_pressure = plenum_pressure
contact_pressure = contact_pressure
quadrature = true
[]
[]
[BCs]
[no_x_all]
type = DirichletBC
variable = disp_x
boundary = 12
value = 0.0
[]
[clad_surface_temperature]
type = FunctionDirichletBC
variable = temp
boundary = '2'
function = clad_bc
[]
[Pressure]
# apply coolant pressure on clad outer walls
[coolantPressure]
boundary = '2'
factor = 15.517e6
function = pressure_ramp # use the pressure_ramp function defined above
displacements = 'disp_x'
[]
[]
[PlenumPressure]
# apply plenum pressure on clad inner walls and pellet surfaces
[plenumPressure]
boundary = 9
initial_pressure = 2.62e6
startup_time = 0
R = 8.3143
output_initial_moles = initial_moles # coupling to post processor to get initial fill gas mass
temperature = ave_temp_interior
volume = gas_volume # coupling to post processor to get gas volume
material_input = fis_gas_released # coupling to post processor to get fission gas added
output = plenum_pressure # coupling to post processor to output plenum/gap pressure
displacements = 'disp_x'
[]
[]
[]
[Materials]
[fuel_thermal]
type = UO2Thermal
block = fuel
temperature = temp
burnup = burnup
thermal_conductivity_model = NFIR
[]
[fuel_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = fuel
youngs_modulus = 2.0e11
poissons_ratio = 0.345
[]
[fuel_elastic_stress]
type = ComputeFiniteStrainElasticStress
block = fuel
[]
[fuel_thermal_expansion]
type = ComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 10.0e-6
stress_free_temperature = 300.0
eigenstrain_name = fuel_thermal_strain
[]
[fuel_relocation]
type = UO2RelocationEigenstrain
block = fuel
burnup = burnup
rod_ave_lin_pow = power_history
axial_power_profile = axial_peaking_factors
fuel_pin_geometry = pin_geometry
relocation_activation1 = 5000
burnup_relocation_stop = 0.024
relocation_model = ESCORE_modified
eigenstrain_name = fuel_relocation_strain
[]
[fuel_volumetric_swelling]
type = UO2VolumetricSwellingEigenstrain
gas_swelling_model_type = SIFGRS
block = fuel
burnup = burnup
initial_fuel_density = 10431.0
eigenstrain_name = fuel_volumetric_strain
[]
[fuel_density]
type = StrainAdjustedDensity
block = fuel
strain_free_density = ${initial_fuel_density}
[]
[fission_gas_release]
type = UO2Sifgrs
block = fuel
temperature = temp
fission_rate = fission_rate
grain_radius = grain_radius
initial_porosity = 0.05
burnup = burnup
gbs_model = true
[]
[clad_thermal]
type = HeatConductionMaterial
block = clad
thermal_conductivity = 16.0
specific_heat = 330.0
[]
[clad_elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 7.5e10
poissons_ratio = 0.3
block = clad
[]
[clad_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'clad_zrycreep'
block = clad
[]
[clad_zrycreep]
type = ZryCreepLimbackHoppeUpdate
block = clad
fast_neutron_flux = fast_neutron_flux
fast_neutron_fluence = fast_neutron_fluence
model_irradiation_creep = true
model_primary_creep = true
model_thermal_creep = true
zircaloy_material_type = stress_relief_annealed
[]
[thermal_expansion]
type = ZryThermalExpansionMATPROEigenstrain
block = clad
stress_free_temperature = 300.0
eigenstrain_name = clad_thermal_eigenstrain
[]
[irradiation_swelling]
type = ZryIrradiationGrowthEigenstrain
block = clad
fast_neutron_fluence = fast_neutron_fluence
zircaloy_material_type = stress_relief_annealed
eigenstrain_name = clad_irradiation_strain
[]
[clad_density]
type = StrainAdjustedDensity
block = clad
strain_free_density = 6551.0
[]
[]
[Dampers]
[limitT]
type = MaxIncrement
max_increment = 20.0
variable = temp
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu'
line_search = 'none'
# controls for linear iterations
l_max_its = 100
l_tol = 1e-4 #8e-3
# controls for nonlinear iterations
nl_max_its = 50
nl_rel_tol = 1e-4
nl_abs_tol = 1e-10
# time control
start_time = -100
end_time = 141802226 #141798626+3600
dtmax = 1e6
dtmin = 1
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
iteration_window = 2
optimal_iterations = 10
linear_iteration_ratio = 100
[]
[Quadrature]
order = fifth
side_order = seventh
[]
[]
[Postprocessors]
[ave_temp_interior]
type = LayeredSideAverageValuePostprocessor
boundary = 9
variable = temp
execute_on = 'initial linear'
fuel_pin_geometry = pin_geometry
[]
[clad_inner_vol]
type = LayeredInternalVolumePostprocessor
boundary = 7
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[pellet_volume]
type = LayeredInternalVolumePostprocessor
boundary = 8
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[avg_clad_temp]
type = LayeredSideAverageValuePostprocessor
boundary = 7
variable = temp
execute_on = 'initial timestep_end'
fuel_pin_geometry = pin_geometry
[]
[max_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_fuel_temp]
type = NodalExtremeValue
block = fuel
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[max_clad_temp]
type = NodalExtremeValue
block = clad
value_type = max
variable = temp
execute_on = 'initial timestep_end'
[]
[min_clad_temp]
type = NodalExtremeValue
block = clad
value_type = min
variable = temp
execute_on = 'initial timestep_end'
[]
[fis_gas_generated]
type = LayeredElementIntegralFisGasGeneratedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_released]
type = LayeredElementIntegralFisGasReleasedSifgrsPostprocessor
block = fuel
fuel_pin_geometry = pin_geometry
[]
[fis_gas_grain]
type = LayeredElementIntegralFisGasGrainSifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[fis_gas_boundary]
type = LayeredElementIntegralFisGasBoundarySifgrsPostprocessor
block = fuel
outputs = exodus
fuel_pin_geometry = pin_geometry
[]
[gas_volume]
type = LayeredInternalVolumePostprocessor
boundary = 9
execute_on = 'initial linear'
component = 0
fuel_pin_geometry = pin_geometry
out_of_plane_strain = strain_yy
[]
[flux_from_clad]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 5
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[flux_from_fuel]
type = LayeredSideFluxIntegralPostprocessor
variable = temp
boundary = 10
diffusivity = thermal_conductivity
fuel_pin_geometry = pin_geometry
[]
[rod_total_power]
type = LayeredElementIntegralPowerPostprocessor
variable = temp
fission_rate = fission_rate
block = fuel
fuel_pin_geometry = pin_geometry
[]
[rod_input_power]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 3.81 # rod height
[]
[average_fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
[average_burnup]
type = RodAverageBurnup
burnup_function = burnup
[]
[FCT]
type = NodalVariableValue
variable = temp
nodeid = 231 # Global node id 232, at coordinates (0.0, 1.71774, 0.0)
[]
[fis_gas_percent]
type = FGRPercent
fission_gas_released = fis_gas_released
fission_gas_generated = fis_gas_generated
[]
[max_penetration]
type = NodalExtremeValue
block = fuel
value_type = max
variable = penetration
[]
[min_penetration]
type = NodalExtremeValue
block = fuel
value_type = min
variable = penetration
[]
[max_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = max
variable = contact_pressure
[]
[min_contact_pressure]
type = NodalExtremeValue
block = fuel
value_type = min
variable = contact_pressure
[]
[vonmises_stress_fuel]
type = ElementAverageValue
block = fuel
variable = vonmises_stress
[]
[vonmises_stress_clad]
type = ElementAverageValue
block = clad
variable = vonmises_stress
[]
## Nodal comparison values
[top_disp_r_fuel]
type = NodalVariableValue
variable = disp_x
nodeid = 4043 #coords (0.0041275, 3.62274)
[]
[top_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 847 #coords (0.0042164, 3.62274)
[]
[plenum_disp_r_clad]
type = NodalVariableValue
variable = disp_x
nodeid = 892 #coords (0.0042164, 3.96053)
[]
[top_radial_strain_fuel]
type = ElementalVariableValue
variable = strain_xx
elementid = 203
[]
[top_axial_strain_fuel]
type = ElementalVariableValue
elementid = 203
variable = strain_yy
[]
[top_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 36
[]
[top_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 36
[]
[plenum_radial_strain_clad]
type = ElementalVariableValue
variable = strain_xx
elementid = 40
[]
[plenum_axial_strain_clad]
type = ElementalVariableValue
variable = strain_yy
elementid = 40
[]
[]
[VectorPostprocessors]
[clad_dia]
type = NodalValueSampler
variable = disp_x
boundary = 2
sort_by = y
outputs = 'outfile_1'
[]
[pellet_dia]
type = NodalValueSampler
variable = disp_x
boundary = 10
sort_by = y
outputs = 'outfile_fuel_radial_displacement'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[pellet_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 10
# sort_by = y
# outputs = 'outfile_fuel_surface_temp'
#[]
#[pellet_center_temp]
# type = NodalValueSampler
# variable = temp
# boundary = 12
# sort_by = y
# outputs = 'outfile_FCT'
#[]
[]
[PerformanceMetricOutputs]
[]
[Outputs]
perf_graph = true
csv = true
exodus = true
color = false
[outfile_1]
type = CSV
execute_on = 'FINAL'
[]
[outfile_fuel_radial_displacement]
type = CSV
execute_on = 'FINAL'
[]
#Uncomment to print out axial FCT and PST at every timestep
#[outfile_fuel_surface_temp]
# type = CSV
# execute_on = linear
#[]
#[outfile_FCT]
# type = CSV
# execute_on = linear
#[]
[console]
type = Console
max_rows = 25
[]
[]