- temperatureThe coupled temperature (K)
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:The coupled temperature (K)
ADMetallicFuelWastage
Computes wastage thickness on the fuel-cladding interface.
Description
ADMetallicFuelWastage finds the thickness of the wastage formed on the interface of metallic fuel and steel cladding in fast neutron reactors using a series of methods (automatic differentiation version). Some of these correlations, including flux_ht9, flux_ss316, flux_d9, burnup_ht9_legacy, and flux_burnup_ht9, are used by LIFE-METAL. Others have been optimized to provided improved accuracy based on recently developed EBR-II operating conditions in the FIPD database. The correlations were developed and implemented by Argonne National Laboratory.
The wastage thickness, (), includes three components, fission product wastage (), carbon depletion zone (), and cladding thinning that is not included in the former two components (). Three modes of correlations have been implemented into BISON: the flux dependent mode, the burnup dependent mode, and the flux-burnup dependent mode.
In the flux dependent mode, the growth rate of wastage () is calculated as where is the neutron fast flux (), is the gas constant (), is temperature (), is time (), and (), (), and () are empirical parameters. The flux dependent mode can be used for three cladding materials (HT9, stainless steel 316, and D9, which correspond to methods flux_ht9, flux_ss316, and flux_d9).
In the burnup dependent mode, the growth rate of wastage is calculated as where is the atom percent burnup, is the gas constant (), is temperature (), is time (), and () and () are empirical parameters. The burnup dependent mode is only available for HT9 at this moment. Users may use either method burnup_ht9_legacy for LIFE-METAL adopted parameters or method burnup_ht9_opt for recent Dakota-optimized parameters based on improved EBR-II operating parameters available in FIPD. Originally, the time-varying sodium flow flux information from FIPD was used with BISON's CoolantChannelAction to set up the temperature boundary condition. In that case, Qb_ht9_opt and k0_ht9_opt are 1.7959350973E5 and 3.3786089381E1 , respectively. This temperature boundary condition approach was later replaced by directly adopting the time-varying cladding outer surface temperature available in FIPD by FIPDAxialProfileFunction as the Dirichlet boundary condition. The default parameters are based on the latter temperature boundary condition approach.
Derived from the burnup dependent mode, a new correlation (burnup_ht9_gap) that takes gap closure into account was developed, which has the following expression, where and are the atomic percent burnup and time corresponding to the initiation of FCCI formation. has two components: (1) gap closure burnup, , which is tracked by the local penetration depth of the contact module. A minimum gap width (min_gap) is used as the criterion for gap closure. (2) rind consumption burnup delay, , which can be defined by an empirical function rind_burnup_delay. The model will be further optimized once the advanced swelling and contact models are developed.
In the flux-burnup dependent mode, the growth rate of wastage is calculated as This is a combination of the previous two models. Currently this mode is only available for HT9 cladding through the method flux_burnup_ht9.
The parameters were fitted by using PIE data from EBR-II.
The flux mode was calibrated using PIE data from X419, X420, X421, X425, X429, X441, and X447. The burnup mode and flux-burnup mode were calibrated using the PIE data from X447.
Example Input Syntax
[Materials<<<{"href": "../../syntax/Materials/index.html"}>>>]
[wastage]
type = ADMetallicFuelWastage<<<{"description": "Computes wastage thickness on the fuel-cladding interface.", "href": "MetallicFuelWastage.html"}>>>
fast_neutron_flux<<<{"description": "The fast neutron flux (neutrons/m^2-sec)"}>>> = 'ad_fast_neutron_flux'
method<<<{"description": "Wastage thickness method choice. Options: flux_ht9 flux_ss316 flux_d9 burnup_ht9_legacy burnup_ht9_opt burnup_ht9_gap flux_burnup_ht9"}>>> = flux_ht9
temperature<<<{"description": "The coupled temperature (K)"}>>> = temp
burnup<<<{"description": "Burnup material name"}>>> = 0.0
scale_factor<<<{"description": "Scale factor used for fine tuning"}>>> = 1.0
outputs<<<{"description": "Vector of output names where you would like to restrict the output of variables(s) associated with this object"}>>> = all
[]
[]Input Parameters
- D_0bf_ht90.000930106Coefficient term of the diffusion expression in burnup and flux related expression (m^2/s)
Default:0.000930106
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of the diffusion expression in burnup and flux related expression (m^2/s)
- D_d9_07.88529Coefficient term of the diffusion expression (m^2/s)
Default:7.88529
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of the diffusion expression (m^2/s)
- D_d9_io6.39784e-38Coefficient term of radiation enhanced diffusion expression (m^4)
Default:6.39784e-38
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of radiation enhanced diffusion expression (m^4)
- D_ht9_00.000112186Coefficient term of the diffusion expression (m^2/s)
Default:0.000112186
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of the diffusion expression (m^2/s)
- D_ht9_io1.79211e-39Coefficient term of radiation enhanced diffusion expression (m^4)
Default:1.79211e-39
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of radiation enhanced diffusion expression (m^4)
- D_iobf_ht97.86737e-43Coefficient term of radiation enhanced diffusion expression in burnup and flux related expression (m^4)
Default:7.86737e-43
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of radiation enhanced diffusion expression in burnup and flux related expression (m^4)
- D_ss316_02.41935Coefficient term of the diffusion expression (m^2/s)
Default:2.41935
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of the diffusion expression (m^2/s)
- D_ss316_io1.9534e-38Coefficient term of radiation enhanced diffusion expression (m^4)
Default:1.9534e-38
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Coefficient term of radiation enhanced diffusion expression (m^4)
- Q_d9266102Activation energy term of the diffusion expression in J/mol
Default:266102
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term of the diffusion expression in J/mol
- Q_ht9201782Activation energy term of the diffusion expression in J/mol
Default:201782
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term of the diffusion expression in J/mol
- Q_ss316266102Activation energy term of the diffusion expression in J/mol
Default:266102
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term of the diffusion expression in J/mol
- Qb_ht9_gap195398Activation energy term used in burnup related expression (J/mol)
Default:195398
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term used in burnup related expression (J/mol)
- Qb_ht9_lg179592Activation energy term used in burnup related expression (J/mol)
Default:179592
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term used in burnup related expression (J/mol)
- Qb_ht9_opt179069Activation energy term used in burnup related expression (J/mol)
Default:179069
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term used in burnup related expression (J/mol)
- Qbf_ht9252253Activation energy term used in burnup and flux related expression (J/mol)
Default:252253
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Activation energy term used in burnup and flux related expression (J/mol)
- R8.31446Gas constant in J/mol/K
Default:8.31446
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Gas constant in J/mol/K
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- burnupburnupBurnup material name
Default:burnup
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:Burnup material name
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Options:NONE, ELEMENT, SUBDOMAIN
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- fast_neutron_fluxfast_neutron_fluxThe fast neutron flux (neutrons/m^2-sec)
Default:fast_neutron_flux
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:The fast neutron flux (neutrons/m^2-sec)
- k0_ht9_gap298.835Preexponential coefficient used in burnup related expression (m/s^0.5)
Default:298.835
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Preexponential coefficient used in burnup related expression (m/s^0.5)
- k0_ht9_lg32.973Preexponential coefficient used in burnup related expression (m/s^0.5)
Default:32.973
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Preexponential coefficient used in burnup related expression (m/s^0.5)
- k0_ht9_opt39.1273Preexponential coefficient used in burnup related expression (m/s^0.5)
Default:39.1273
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Preexponential coefficient used in burnup related expression (m/s^0.5)
- methodburnup_ht9_legacyWastage thickness method choice. Options: flux_ht9 flux_ss316 flux_d9 burnup_ht9_legacy burnup_ht9_opt burnup_ht9_gap flux_burnup_ht9
Default:burnup_ht9_legacy
C++ Type:MooseEnum
Options:flux_ht9, flux_ss316, flux_d9, burnup_ht9_legacy, burnup_ht9_opt, burnup_ht9_gap, flux_burnup_ht9
Controllable:No
Description:Wastage thickness method choice. Options: flux_ht9 flux_ss316 flux_d9 burnup_ht9_legacy burnup_ht9_opt burnup_ht9_gap flux_burnup_ht9
- min_gap1e-05Minimum fuel-cladding gap to initiate FCCI
Default:1e-05
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Minimum fuel-cladding gap to initiate FCCI
- penetration_depth0negative value of gap width (m).
Default:0
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:negative value of gap width (m).
- rind_burnup_delay0delayed burnup due to rind after gap closure.
Default:0
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:delayed burnup due to rind after gap closure.
- scale_factor1Scale factor used for fine tuning
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Scale factor used for fine tuning
- use_initial_timeFalseFlag to use an initial time corresponding to initial burnup that is determined by gap width
Default:False
C++ Type:bool
Controllable:No
Description:Flag to use an initial time corresponding to initial burnup that is determined by gap width
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
Outputs Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Material Property Retrieval Parameters
Input Files
- (test/tests/ADMetallicFuelWastage/ad_flux_burnup_ht9.i)
- (test/tests/ADMetallicFuelWastage/ad_burnup_ht9_legacy.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_ht9.i)
- (assessment/metallic_fuel/EBRII/X447/analysis/enhancement/x447_enh_base.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_ht9-jac.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_d9.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_ss316-jac.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_ss316.i)
- (assessment/metallic_fuel/FBTA/analysis/steady_state/common_inputs/d9_clad_base.i)
- (assessment/metallic_fuel/EBRII/X423/analysis/x423_vp_base.i)
- (test/tests/ADMetallicFuelWastage/ad_burnup_ht9_legacy-jac.i)
- (test/tests/ADMetallicFuelWastage/ad_burnup_ht9_opt-jac.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_d9-jac.i)
- (test/tests/ADMetallicFuelWastage/ad_burnup_ht9_gap.i)
- (test/tests/ADMetallicFuelWastage/ad_burnup_ht9_gap-jac.i)
- (assessment/metallic_fuel/WPF/analysis/X425_T418/X425_base.i)
- (assessment/metallic_fuel/WPF/analysis/FM-1/FM_base.i)
- (assessment/metallic_fuel/FBTA/analysis/steady_state/common_inputs/ss316_clad_base.i)
- (test/tests/ADMetallicFuelWastage/ad_flux_burnup_ht9-jac.i)
- (assessment/metallic_fuel/FBTA/analysis/steady_state/common_inputs/ht9_clad_base.i)
- (test/tests/ADMetallicFuelWastage/ad_burnup_ht9_opt.i)
(test/tests/ADMetallicFuelWastage/ad_flux_ht9.i)
# This test is to verify the calculation in ADMetallicFuelWastage (flux_ht9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_ht9
temperature = temp
burnup = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[flux_avg]
type = ElementAverageValue
variable = fast_neutron_flux
[]
[]
[Outputs]
csv = true
[]
(test/tests/ADMetallicFuelWastage/ad_flux_burnup_ht9.i)
# This test is to verify the calculation in ADMetallicFuelWastage (flux_burnup_ht9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Functions]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_burnup_ht9
temperature = temp
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[fsnrate_avg]
type = ElementAverageValue
variable = fission_rate
[]
[burnup_avg]
type = ElementAverageValue
variable = burnup
[]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[flux_avg]
type = ElementAverageValue
variable = fast_neutron_flux
[]
[]
[Outputs]
csv = true
[]
(test/tests/ADMetallicFuelWastage/ad_burnup_ht9_legacy.i)
# This test is to verify the calculation in ADMetallicFuelWastage (burnup_ht9_legacy)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Functions]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[wastage]
type = ADMetallicFuelWastage
method = burnup_ht9_legacy
temperature = temp
fast_neutron_flux = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[fsnrate_avg]
type = ElementAverageValue
variable = fission_rate
[]
[burnup_avg]
type = ElementAverageValue
variable = burnup
[]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[]
[Outputs]
csv = true
[]
(test/tests/ADMetallicFuelWastage/ad_flux_ht9.i)
# This test is to verify the calculation in ADMetallicFuelWastage (flux_ht9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_ht9
temperature = temp
burnup = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[flux_avg]
type = ElementAverageValue
variable = fast_neutron_flux
[]
[]
[Outputs]
csv = true
[]
(assessment/metallic_fuel/EBRII/X447/analysis/enhancement/x447_enh_base.i)
# Enhanced X447 analysis
# Uses advanced contact and gap conductance modeling from X441 assessment case
# Uses 0.3017 for fission gas yield, which is consistent with X423 assessment case
## Sodium logging was calculated by hand here for confirmation
## The hotpressing, or the accumulation of solid FPs (~15% at ~10% BU)
## Will consume the available porosity
gap_bottom_length = 0.31e-3
top_bot_cladding_height = 2.24e-3
# Calculations
cladding_ir = ${fparse fuel_radius + cladding_gap_width}
gas_plenum_height = ${fparse plenum_volume / pi / cladding_ir^2}
fuel_y_start = ${fparse gap_bottom_length + top_bot_cladding_height}
alpha_start = 877
alpha_end = 936
bubble_concentration = 1e15
[GlobalParams]
order = FIRST
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x disp_y'
alpha_transition_end = ${alpha_end}
alpha_transition_start = ${alpha_start}
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
group_variables = 'disp_x disp_y'
converge_on = 'disp_x disp_y temp'
[]
[Mesh]
# Pin design parameters from FIPD database
[gen]
type = FIPDRodletMeshGenerator
fipd_geom_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} / ${pin_id} _design.csv'}
gap_bottom_length = ${gap_bottom_length} # arbitrary
cladding_bottom_plug_length = ${top_bot_cladding_height} # arbitrary
cladding_top_plug_length = ${top_bot_cladding_height} # arbitrary
cladding_sidewall_radial_elements = 10
cladding_sidewall_axial_element_numbers = '2 150 150'
cladding_top_plug_radial_elements = 10
cladding_top_plug_axial_elements = 5
cladding_bottom_plug_axial_elements = 5
fuel_radial_elements = 6
fuel_axial_element_intervals = '0 1'
fuel_axial_element_numbers = '150'
use_default_cladding_sidewall_axial_element_intervals = true
elem_type = QUAD4
make_stand = true
make_cap = true
cap_axial_elements = 15
stand_axial_elements = 15
[]
[sodium_height]
type = SideSetsFromBoundingBoxGenerator
input = gen
bottom_left = '0 0 0'
top_right = '${fparse cladding_ir + cladding_thickness} ${fparse fuel_y_start + fuel_height} 0'
included_boundaries = 'cladding_inside_right'
boundary_new = '1005'
[]
[gas_height]
type = SideSetsFromBoundingBoxGenerator
input = sodium_height
bottom_left = '0 ${fparse fuel_y_start + fuel_height} 0'
top_right = '${fparse cladding_ir + cladding_thickness} ${fparse fuel_y_start + fuel_height + gas_plenum_height + top_bot_cladding_height} 0'
included_boundaries = 'cladding_inside_right'
boundary_new = '1006'
[]
[sodium_plenum_rename]
type = RenameBoundaryGenerator
input = gas_height
old_boundary = '1005 1006'
new_boundary = 'sodium_height gas_height'
[]
patch_size = 120
patch_update_strategy = always
partitioner = centroid
centroid_partitioner_direction = y
coord_type = RZ
[]
[Variables]
[temp]
initial_condition = 298
block = 'fuel cladding cap stand'
[]
[disp_x]
block = 'fuel cladding cap stand'
[]
[disp_y]
block = 'fuel cladding cap stand'
[]
[]
[Functions]
[fflux_axial_peaking_factors] # Fast flux peaking factor from FIPD database; used for fuel related simulations
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /peakingfactor_flux_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
extrapolate_to_zero = true
[]
[fflux_axial_peaking_factors_elongate] # Fast flux peaking factor from FIPD database; used for cladding related simulations
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /peakingfactor_flux_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
extrapolate_to_zero = true
fuel_elongation_pp = max_fuel_elongation # pp used to track fuel elongation
[]
[flux_history] # Time-dependent pin average fast flux from FIPD database
type = PiecewiseLinear
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /flux_history_ ${pin_id} .csv'}
[]
[clad_od_temp] # Time-dependent cladding OD temperature from FIPD database
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /clad_od_temp_history_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
[]
[ab_sodium_vol]
type = MeshPropertyFunction
mesh_generator = gen
mesh_property_name = sodium_volume
scale_factor = -1.0
[]
[sodium_volume]
# Need to account for the factor that hot pressing is also occupying the open pores
type = ParsedFunction
symbol_names = 'porosity_sodium_logging_avg volume_fuel raw_sodium_vol temp_sodium_avg'
symbol_values = 'porosity_sodium_logging_avg volume_fuel ab_sodium_vol temp_sodium_avg'
# Note the the symbol before volume_fuel should be negative as volume_fuel itself is negative
expression = 'raw_sodium_vol * 954 / (1102 - 0.23 * temp_sodium_avg) - volume_fuel * porosity_sodium_logging_avg'
[]
[power_history] # Time-dependent pin average power from FIPD database
type = PiecewiseLinear
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /power_history_ ${pin_id} .csv'}
[]
[axial_peaking_factors]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /peakingfactor_power_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
[]
[axial_peaking_factors_extended]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /peakingfactor_power_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
fuel_elongation_pp = max_fuel_elongation # pp used to track fuel elongation
[]
[anisotropic_swelling_factor]
type = ParsedFunction
symbol_names = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg fuel_height fuel_radius'
symbol_values = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg ${fuel_height} '
'${fuel_radius}'
expression = '(disp_x_fuel_radial_surface_avg / ${fuel_radius}) / '
'(disp_y_fuel_top_surface_avg / ${fuel_height})'
[]
[gap_thermal_conductivity]
type = ParsedFunction
expression = '124.67 - 0.11381 * t + 5.5226e-5 * t^2 - 1.1842e-8 * t^3'
[]
[id_vpp_func] # vpp_function used to track FCCI-related cladding degradation.
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = id_wastage
argument_column = y
wastage_type = ID
value_column = wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[od_vpp_func] # vpp_function used to track CCCI-related cladding degradation.
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = od_wastage
argument_column = y
wastage_type = OD
value_column = cc_wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[fuel]
block = fuel
strain = FINITE
generate_output = 'firstinv_strain stress_xx stress_yy stress_zz vonmises_stress '
'hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz '
'elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy '
'strain_zz'
extra_vector_tags = 'ref'
eigenstrain_names = 'fuel_thermal_strain solid_swelling_eigenstrain'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[cladding]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress '
'creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx '
'elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = 'cladding'
eigenstrain_names = 'cladding_thermal_eigenstrain'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[]
[Kernels]
[gravity]
type = ADGravity
block = 'fuel cladding'
variable = disp_y
value = -9.81
extra_vector_tags = 'ref'
[]
[heat]
type = ADHeatConduction
block = 'fuel cladding cap stand'
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie]
type = ADHeatConductionTimeDerivative
block = 'fuel cladding cap stand'
variable = temp
extra_vector_tags = 'ref'
[]
[heat_source]
type = ADFissionRateHeatSource
variable = temp
block = 'fuel'
fission_rate = fission_rate
extra_vector_tags = 'ref'
energy_deposited_in_fuel = 0.95
[]
[disp_x_dt]
type = ADTimeDerivative
variable = disp_x
block = ' cap stand'
extra_vector_tags = 'ref'
[]
[disp_y_dt]
type = ADTimeDerivative
variable = disp_y
block = 'cap stand'
extra_vector_tags = 'ref'
[]
[disp_x_diff]
type = ADMatAnisoDiffusion
variable = disp_x
block = 'cap stand'
diffusivity = d_x
extra_vector_tags = 'ref'
[]
[disp_y_diff]
type = ADMatDiffusion
variable = disp_y
block = 'cap stand'
diffusivity = 1e8
extra_vector_tags = 'ref'
[]
[]
[UserObjects]
[pin_geometry]
type = FuelPinGeometry
clad_bottom = cladding_outside_bottom
clad_inner_wall = cladding_inside_right
clad_outer_wall = cladding_outside_right
clad_top = cladding_outside_top
pellet_exteriors = fuel_outside_all
[]
[clad_thm_exp]
type = LayeredAverage
variable = clad_thermal_eigenstrain_xx
direction = y
num_layers = 1000
block = cladding
[]
[]
[Contact]
[fuel_cladding_mechanical]
primary = cladding_inside_right
secondary = fuel_outer_radial_surface
model = coulomb
friction_coefficient = 0.1
formulation = mortar
c_normal = ${fparse 1e17 * magic_factor}
c_tangential = ${fparse 1e19 * magic_factor}
correct_edge_dropping = true
[]
[]
[MortarGapHeatTransfer]
[inside2outside]
temperature = temp
boundary = 'cladding_inside_right'
gap_conductivity_function = gap_thermal_conductivity
gap_conductivity_function_variable = temp
primary_boundary = cladding_inside_right
secondary_boundary = fuel_contact_surfaces
gap_flux_options = 'CONDUCTION'
ghost_point_neighbors = true
[]
[]
[BCs]
[no_x_all]
type = ADDirichletBC
variable = disp_x
boundary = 'centerline cap_top'
value = 0.0
preset = false
[]
[no_y_clad]
type = ADDirichletBC
variable = disp_y
boundary = 'cladding_inside_bottom'
value = 0.0
preset = false
[]
[Pressure]
[coolantPressure]
boundary = 'cladding_outside_right'
factor = 0.151e6
use_automatic_differentiation = true
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 'inside_surfaces'
initial_pressure = 84116 # in Pa, 12.2 psi
startup_time = 0
R = 8.3143
temperature = temp_gas_avg
volume = volume_plenum
output = plenum_pressure
material_input = fg_released
use_automatic_differentiation = true
[]
[]
[surf] # Setting temperature BC base on FIPD data
type = FunctionDirichletBC
variable = temp
boundary = 'cladding_outside_bottom cladding_outside_right cladding_outside_top'
function = clad_od_temp
[]
[]
[AuxVariables]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[relx]
[]
[clad_thm_exp]
order = CONSTANT
family = MONOMIAL
block = cladding
[]
[clad_thermal_eigenstrain_xx]
order = CONSTANT
family = MONOMIAL
block = cladding
[]
[]
[AuxKernels]
[cdf_amount]
block = cladding
type = MaterialRealAux
property = cdf_failure
variable = cumulative_damage_index
[]
[clad_thm_exp]
type = SpatialUserObjectAux
variable = clad_thm_exp
execute_on = 'initial timestep_end'
user_object = clad_thm_exp
block = cladding
[]
[clad_thermal_eigenstrain_xx]
type = ADRankTwoAux
rank_two_tensor = cladding_thermal_eigenstrain
variable = clad_thermal_eigenstrain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = cladding
[]
[]
[Materials]
[longHT9_failure]
type = HT9FailureClad
block = cladding
method = cdf_long
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[d_x]
type = ADConstantAnisotropicMobility
tensor = '1e3 0 0
0 1e6 0
0 0 0'
M_name = d_x
[]
[cap_thcond]
type = ADGenericConstantMaterial
prop_names = 'thermal_conductivity specific_heat density'
prop_values = '65 1200 830'
block = 'cap stand'
outputs = all
[]
[interconnected_porosity]
type = ADParsedMaterial
block = 'fuel'
property_name = interconnected_porosity
material_property_names = 'porosity interconnectivity'
expression = 'porosity * interconnectivity'
outputs = all
[]
[fission_rate]
type = ADUPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${fuel_radius}
initial_X_Zr=${initial_X_Zr}
X_Zr = ${initial_X_Zr}
X_Pu_function = 0
block = 'fuel'
outputs = all
[]
[fission_rate_elongate]
type = ADUPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors_extended
pellet_radius = ${fuel_radius}
# initial_X_Zr=${initial_X_Zr}
X_Zr = ${initial_X_Zr}
X_Pu_function = 0
block = 'cladding'
outputs = all
fission_rate_name = fission_rate
[]
[burnup]
type = ADUPuZrBurnup
initial_X_Zr = ${initial_X_Zr}
initial_X_Pu = 0
density = ${fuel_density}
block = 'fuel'
outputs = all
[]
[burnup_elongate]
type = ADUPuZrBurnup
initial_X_Pu = 0
initial_X_Zr = ${initial_X_Zr}
outputs = all
block = cladding
density = ${fuel_density}
burnup_name = burnup
[]
[fuel_elastic_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'hotpress fuel_upuzrcreep gas_swelling'
block = 'fuel'
outputs = all
[]
[hotpress]
type = ADUPuZrHotPressingStressUpdate
block = 'fuel'
outputs = all
surface_energy = 1.6
plenum_pressure = plenum_pressure
porosity_name = porosity
max_inelastic_increment = 1e-1
interconnectivity = interconnectivity
bubble_concentration = ${bubble_concentration}
temperature = temp
creep_model = MFH
fission_rate = fission_rate
atomic_volume = 2.15e-29
porosity_start = 0.01
porosity_end = 0
grain_boundary_D0 = 4e-29
grain_boundary_Q = 0
absolute_tolerance = 1e-9
[]
[porosity]
type = ADPorosityFromStrain
block = 'fuel'
initial_porosity = 1e-10
inelastic_strain = 'combined_inelastic_strain'
outputs = all
[]
[fuel_elasticity_tensor]
type = ADUPuZrElasticityTensor
X_Zr = ${initial_X_Zr}
X_Pu = 0
youngs_model = LANL
block = 'fuel'
temperature = temp
use_old_porosity = true
outputs = all
output_properties = 'youngs_modulus poissons_ratio'
[]
[fuel_upuzrcreep]
type = ADUPuZrCreepUpdate
block = 'fuel'
temperature = temp
porosity = porosity
use_old_porosity = true
max_inelastic_increment = 1e-1
outputs = all
automatic_differentiation_return_mapping = false
[]
[fuel_thermal_expansion]
type = ADUPuZrThermalExpansionEigenstrain
block = 'fuel'
temperature = temp
stress_free_temperature = 298.0
eigenstrain_name = fuel_thermal_strain
outputs = all
thermal_expansion_model = LANL
X_Zr = ${initial_X_Zr}
X_Pu = 0
[]
[gas_swelling]
type = ADSimpleFissionGasViscoplasticityStressUpdate
temperature = temp
outputs = all
block = 'fuel'
bubble_concentration = ${bubble_concentration}
initial_bubble_concentration = ${bubble_concentration}
compute_interconnectivity = true
fission_gas_yield = 0.3017 #0.25
fission_rate = fission_rate
initial_atoms_per_bubble = 1e-05
initial_bubble_radius = 1e-15
initial_fgm_dissolved = 0
interconnection_cutoff = 0.99
interconnection_initiating_porosity = 0.23
interconnection_terminating_porosity = 0.25
max_inelastic_increment = 1e-2
retained_gas_fraction = 0.25
interconnection_dependent_retained_gas_fraction = 0.5
surface_energy = 1.6
anisotropic_factor = 0.26
initial_porosity = 1e-10
[]
[solid_swelling]
type = ADBurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = 'fuel'
swelling_name = 'solid_swelling'
outputs = all
[]
[metal_fuel_thermal]
type = ADUPuZrThermal
block = 'fuel'
X_Zr = ${initial_X_Zr}
X_Pu = 0
spheat_model = savage
porosity = porosity
temperature = temp
outputs = all
porosity_model = logged
sodium_logged_porosity = sodium_logged_porosity
[]
[sodium_logging]
type = ADUPuZrSodiumLogging
block = 'fuel'
porosity = porosity
interconnectivity = interconnectivity
sodium_infiltration_fraction = 0.28
outputs = all
[]
[fuel_density]
type = ADStrainAdjustedDensity
block = 'fuel'
strain_free_density = ${fuel_density}
outputs = all
[]
[fast_neutron_flux]
type = ADFastNeutronFlux
calculate_fluence = true
axial_power_profile = fflux_axial_peaking_factors
rod_ave_lin_pow = flux_history
block = fuel
factor = 1.0
outputs = all
[]
[fast_neutron_flux_elongate]
type = ADFastNeutronFlux
calculate_fluence = true
axial_power_profile = fflux_axial_peaking_factors_elongate
rod_ave_lin_pow = flux_history
block = cladding
factor = 1.0
outputs = all
[]
[cladding_elasticity_tensor]
type = ADHT9ElasticityTensor
temperature = temp
block = 'cladding'
outputs = all
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
output_properties = 'youngs_modulus poissons_ratio'
[]
[cladding_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'cladding_creep'
block = 'cladding'
outputs = all
[]
[cladding_creep]
type = ADHT9CreepUpdate
block = 'cladding'
temperature = temp
outputs = all
primary_creep_model = MFH
secondary_creep_model = MFH
tertiary_creep_model = MFH
irradiation_creep_model = MFH
use_effective_time_for_tertiary = true
use_effective_time_for_primary = true
fast_neutron_flux = fast_neutron_flux
[]
[thermal_expansion]
type = ADHT9ThermalExpansionEigenstrain
block = 'cladding'
temperature = temp
stress_free_temperature = 298.0
eigenstrain_name = cladding_thermal_eigenstrain
outputs = all
[]
[cladding_thermal]
type = ADHT9Thermal
block = 'cladding'
temperature = temp
outputs = all
[]
[cladding_density]
type = ADStrainAdjustedDensity
block = 'cladding'
strain_free_density = ${cladding_density}
outputs = all
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = burnup_ht9_opt
burnup = burnup
temperature = temp
scale_factor = 1
block = 'cladding'
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = HT9
use_effective_method = true
temperature = temp
scale_factor = 1
block = 'cladding'
outputs = all
[]
[]
[Dampers]
[disp_x]
type = MaxIncrement
variable = disp_x
max_increment = 1e-4
[]
[disp_y]
type = MaxIncrement
variable = disp_y
max_increment = 1e-3
[]
[temp]
type = MaxIncrement
variable = temp
max_increment = 50
[]
[]
[Preconditioning]
[vcp]
type = VCP
full = true
primary_variable = 'disp_x disp_y temp'
preconditioner = 'LU'
adaptive_condensation = true
lm_variable = 'fuel_cladding_mechanical_normal_lm fuel_cladding_mechanical_tangential_lm inside2outside_thermal_lm'
is_lm_coupling_diagonal = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew -snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount -snes_force_iteration'
petsc_options_value = 'lu superlu_dist 1e-5 NONZERO 1e-15 1'
line_search = 'none'
snesmf_reuse_base = false
verbose = true
l_max_its = 60
nl_max_its = 15 #20
nl_rel_tol = 5e-6
nl_abs_tol = 5e-9
end_time = ${run_time}
dtmin = 1
dtmax = ${max_time_step}
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
ignore_variables_for_autoscaling = 'fuel_cladding_mechanical_normal_lm fuel_cladding_mechanical_tangential_lm inside2outside_thermal_lm'
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = time_step_limit
force_step_every_function_point = true
max_function_change = 300
timestep_limiting_function = power_history
dt = 1e2
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
# elemental temperatures
[temp_fuel_avg]
type = ElementAverageValue
variable = temp
block = 'fuel'
execute_on = 'initial timestep_end'
[]
[temp_fuel_max]
type = ElementExtremeValue
variable = temp
block = 'fuel'
[]
[temp_fuel_min]
type = ElementExtremeValue
variable = temp
block = 'fuel'
value_type = min
[]
[temp_cladding_avg]
type = ElementAverageValue
variable = temp
block = 'cladding'
[]
[temp_cladding_max]
type = ElementExtremeValue
variable = temp
block = 'cladding'
[]
[temp_cladding_min]
type = ElementExtremeValue
variable = temp
block = 'cladding'
value_type = min
[]
# boundary temperatures
[temp_gas_avg]
type = ElementAverageValue
block = 'cap'
variable = temp
execute_on = 'initial timestep_end'
[]
# Beyond gap closure, sodium temperarture is almost the same as the cap.
[temp_sodium_avg]
type = ElementAverageValue
block = 'cap'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_inside_surfaces_avg]
type = SideAverageValue
boundary = 'inside_surfaces'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_fuel_centerline_avg]
type = AxisymmetricCenterlineAverageValue
boundary = 'centerline'
variable = temp
[]
[temp_fuel_centerline_max]
type = NodalExtremeValue
boundary = 'centerline'
variable = temp
[]
[temp_fuel_centerline_min]
type = NodalExtremeValue
boundary = 'centerline'
variable = temp
value_type = min
[]
[temp_fuel_surface_avg]
type = SideAverageValue
boundary = 'fuel_outer_radial_surface'
variable = temp
[]
[temp_fuel_surface_max]
type = NodalExtremeValue
boundary = 'fuel_outer_radial_surface'
variable = temp
[]
[temp_fuel_surface_min]
type = NodalExtremeValue
boundary = 'fuel_outer_radial_surface'
variable = temp
value_type = min
[]
[temp_cladding_inside_right_avg]
type = SideAverageValue
boundary = 'cladding_inside_right'
variable = temp
[]
[temp_cladding_inside_right_max]
type = NodalExtremeValue
boundary = 'cladding_inside_right'
variable = temp
[]
[temp_cladding_outside_right_avg]
type = SideAverageValue
boundary = 'cladding_outside_right'
variable = temp
[]
# stresses
[stress_vonmises_fuel_avg]
type = ElementAverageValue
variable = vonmises_stress
block = 'fuel'
[]
[stress_vonmises_fuel_max]
type = ElementExtremeValue
variable = vonmises_stress
block = 'fuel'
[]
[stress_vonmises_fuel_min]
type = ElementExtremeValue
variable = vonmises_stress
value_type = min
block = 'fuel'
[]
[stress_hydro_fuel_avg]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'fuel'
[]
[stress_hydro_fuel_max]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'fuel'
[]
[stress_hydro_fuel_min]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = 'fuel'
[]
[stress_vonmises_cladding_avg]
type = ElementAverageValue
variable = vonmises_stress
block = 'cladding'
[]
[stress_vonmises_cladding_max]
type = ElementExtremeValue
variable = vonmises_stress
block = 'cladding'
[]
[stress_vonmises_cladding_min]
type = ElementExtremeValue
variable = vonmises_stress
value_type = min
block = 'cladding'
[]
[stress_hydro_cladding_avg]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'cladding'
[]
[stress_hydro_cladding_max]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'cladding'
[]
[stress_hydro_cladding_min]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = 'cladding'
[]
[contact_pressure_max]
type = NodalExtremeValue
variable = fuel_cladding_mechanical_normal_lm
boundary = 'fuel_outer_radial_surface'
[]
# strain information
[strain_solid_swelling_fuel_avg]
type = ElementAverageValue
variable = solid_swelling
block = 'fuel'
[]
[strain_gas_swelling_fuel_avg]
type = ElementAverageValue
variable = effective_fission_gas_strain
block = 'fuel'
[]
[strain_hot_pressing_fuel_avg]
type = ElementAverageValue
variable = effective_hot_pressing_strain
block = 'fuel'
[]
[strain_volumetric_fuel_avg]
type = ElementAverageValue
variable = firstinv_strain
block = 'fuel'
[]
[strain_axial_fuel_avg]
type = ParsedPostprocessor
pp_names = 'disp_y_fuel_top_surface_avg disp_y_fuel_bottom_surface_avg'
expression = '(disp_y_fuel_top_surface_avg - disp_y_fuel_bottom_surface_avg) / ${fuel_height}'
[]
[disp_y_fuel_top_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_top'
[]
[disp_y_fuel_top_surface_max]
type = NodalExtremeValue
variable = disp_y
boundary = 'fuel_top'
[]
[disp_y_fuel_bottom_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_bottom'
[]
[disp_y_fuel_bottom_surface_max]
type = NodalExtremeValue
variable = disp_y
boundary = 'fuel_bottom'
[]
[disp_x_fuel_radial_surface_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'fuel_outer_radial_surface'
[]
[disp_x_fuel_radial_surface_avg]
type = SideAverageValue
variable = disp_x
boundary = 'fuel_outer_radial_surface'
[]
[disp_x_cladding_interior_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_inside_right'
[]
[disp_x_cladding_interior_min]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_inside_right'
value_type = min
[]
[disp_x_cladding_interior_avg]
type = SideAverageValue
variable = disp_x
boundary = 'cladding_inside_right'
[]
[disp_x_cladding_exterior_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_outside_right'
[]
[disp_x_cladding_exterior_avg]
type = SideAverageValue
variable = disp_x
boundary = 'cladding_outside_right'
[]
[anisotropic_swelling_factor]
type = FunctionValuePostprocessor
function = anisotropic_swelling_factor
[]
[max_fuel_elongation]
type = NodalExtremeValue
variable = disp_y
boundary = fuel_outside_all
[]
# geometric information
[volume_cladding_interior]
type = InternalVolume
boundary = 'cladding_inside_all'
[]
[volume_fuel]
type = InternalVolume
boundary = 'fuel_outside_all'
execute_on = 'initial timestep_end'
[]
[volume_plenum]
type = InternalVolume
boundary = 'inside_surfaces'
execute_on = 'initial timestep_end'
addition = sodium_volume
[]
[plenum_ratio]
type = ParsedPostprocessor
pp_names = 'volume_plenum volume_fuel'
expression = 'volume_plenum / volume_fuel'
execute_on = 'initial timestep_end'
[]
[volume_sodium]
type = FunctionValuePostprocessor
function = sodium_volume
execute_on = 'initial timestep_end'
[]
# energy information
[flux_clad]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = 'cladding_inside_right'
diffusivity = thermal_conductivity
[]
[flux_fuel]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = 'fuel_contact_surfaces'
diffusivity = thermal_conductivity
[]
[power_integral]
type = ADElementIntegralPower
variable = temp
use_material_fission_rate = true
fission_rate_material = fission_rate
block = fuel
[]
[linear_heat_generation_rate]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[burnup_avg]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[burnup_max]
type = ElementExtremeValue
block = fuel
variable = burnup
[]
[fission_rate_avg]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
# fission gas information
[fg_produced]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_produced
block = fuel
[]
[fg_released]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_released
block = fuel
execute_on = 'initial timestep_end'
[]
[fg_percent]
type = FGRPercent
fission_gas_released = fg_released
fission_gas_generated = fg_produced
[]
[interconnected_porosity_fuel_avg]
type = ElementAverageValue
variable = interconnected_porosity
block = fuel
execute_on = 'initial timestep_end'
[]
[porosity_fuel_avg]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[porosity_fuel_max]
type = ElementExtremeValue
variable = porosity
block = fuel
[]
[porosity_fuel_min]
type = ElementExtremeValue
variable = porosity
value_type = min
block = fuel
[]
[porosity_sodium_logging_avg]
type = ElementAverageValue
variable = sodium_logged_porosity
block = fuel
[]
# extras
[actual_time_step_limit]
type = MaterialTimeStepPostprocessor
block = 'fuel cladding'
outputs = none
[]
[time_step_limit]
type = ParsedPostprocessor
expression = 'if(actual_time_step_limit > max_dt, max_dt, actual_time_step_limit)'
pp_names = 'actual_time_step_limit'
constant_names = 'max_dt'
constant_expressions = '${max_time_step}'
[]
[max_wastagethickness]
type = ElementExtremeValue
value_type = max
variable = wastage_thickness
[]
[max_wst_temp]
type=ElementExtremeValue
value_type=max
variable=temp
proxy_variable=wastage_thickness
block='cladding'
[]
[max_wst_burnup]
type=ElementExtremeValue
value_type=max
variable=burnup
proxy_variable=wastage_thickness
block='cladding'
[]
[max_cdf]
type = ElementExtremeValue
value_type = max
variable = cumulative_damage_index
[]
[]
[VectorPostprocessors]
[id_wastage]
type = FuelRodLineValueSampler
variable = wastage_thickness
material = 'clad'
fraction = 0.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = csv_wst_a
[]
[od_wastage]
type = FuelRodLineValueSampler
variable = cc_wastage_thickness
material = 'clad'
fraction = 1.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[nrad_comparison_a]
type = FIPDAxialPIEComparison
boundary = cladding_outside_right
sort_by = y
csv_file = ${raw '../../../../../../../fipd-bison-integration-data/X447/ ${pin_id} /X447A_ ${pin_id} _PR.csv'}
variable = disp_x
thermal_strain_variable = clad_thm_exp
involved_component = cladding
mesh_generator = gen
series_type_to_read = 'Cladding O.D. (mils)'
outputs = csv_vpp_a
enable = ${enable_a}
[]
[]
[PerformanceMetricOutputs]
outputs = 'console'
[]
[Outputs]
print_linear_residuals = true
color = true
perf_graph = true
sync_times=${time_spots}
[checkpoint]
type = Checkpoint
sync_times = '19339200'
file_base = 'midpoint_cp'
[]
[exodus]
type = Exodus
time_step_interval = 500
sync_times = ${time_spots}
enable = false
file_base = 'x447_${pin_id}_exodus'
[]
[console]
type = Console
show = 'time_step_size max_fuel_elongation burnup_avg max_wastagethickness'
[]
[csv_vpp_a]
type = CSV
sync_only = true
sync_times = ${time_spots_a}
enable = ${enable_a}
execute_postprocessors_on = none
create_latest_symlink = true
file_base = 'x447_${pin_id}_csv_vpp_a'
[]
[csv_wst_a]
type = CSV
sync_only = true
sync_times = ${time_spots_a}
enable = ${enable_a}
execute_postprocessors_on = none
create_latest_symlink = true
file_base = 'x447_${pin_id}_csv_wst_a'
[]
[csv_general]
type = CSV
sync_only = true
sync_times = ${time_spots}
enable = true
file_base = 'x447_${pin_id}_csv_general'
[]
[]
[Debug]
show_var_residual = 'disp_x disp_y temp'
show_var_residual_norms = true
[]
(test/tests/ADMetallicFuelWastage/ad_flux_ht9-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (flux_ht9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_ht9
temperature = temp
burnup = 0.0
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(test/tests/ADMetallicFuelWastage/ad_flux_d9.i)
# This test is to verify the calculation in ADMetallicFuelWastage (flux_d9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_d9
temperature = temp
burnup = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[flux_avg]
type = ElementAverageValue
variable = fast_neutron_flux
[]
[]
[Outputs]
csv = true
[]
(test/tests/ADMetallicFuelWastage/ad_flux_ss316-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (flux_ht9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_ss316
temperature = temp
burnup = 0.0
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(test/tests/ADMetallicFuelWastage/ad_flux_ss316.i)
# This test is to verify the calculation in ADMetallicFuelWastage (flux_ss316)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_ss316
temperature = temp
burnup = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[flux_avg]
type = ElementAverageValue
variable = fast_neutron_flux
[]
[]
[Outputs]
csv = true
[]
(assessment/metallic_fuel/FBTA/analysis/steady_state/common_inputs/d9_clad_base.i)
# D9 Cladding
clad_density = 7980.0 # D9 RT Density MFH
[Physics/SolidMechanics/QuasiStatic]
[cladding]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = '${cladding_block}'
eigenstrain_names = 'cladding_thermal_eigenstrain clad_swelling'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[]
[Materials]
[clad_elasticity_tensor]
type = ADD9ElasticityTensor
temperature = temp
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
block = ${cladding_block}
[]
[clad_stress]
type = ADComputeMultipleInelasticStress
# tangent_operator = nonlinear
inelastic_models = 'clad_creep'
block = ${cladding_block}
[]
[clad_creep]
type = ADD9CreepUpdate
block = ${cladding_block}
temperature = temp
fast_neutron_flux = fast_neutron_flux
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
[]
[thermal_expansion]
type = ADD9ThermalExpansionEigenstrain
block = ${cladding_block}
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = cladding_thermal_eigenstrain
outputs = all
[]
[clad_swelling]
type = ADD9VolumetricSwellingEigenstrain
eigenstrain_name = clad_swelling
fast_neutron_fluence = fast_neutron_fluence
fast_neutron_flux = fast_neutron_flux
temperature = temp
outputs = all
block = ${cladding_block}
[]
[clad_thermal]
type = ADD9Thermal
block = ${cladding_block}
temperature = temp
[]
[clad_density]
type = ADStrainAdjustedDensity
block = ${cladding_block}
strain_free_density = ${clad_density}
[]
[clad_failure]
type = D9FailureClad
block = ${cladding_block}
method = steady_state
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = flux_ss316
temperature = temp
scale_factor = 1
boundary = cladding_inside_right
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = SS316
use_effective_method = true
temperature = temp
scale_factor = 1
boundary = cladding_outside_right
outputs = all
[]
[]
(assessment/metallic_fuel/EBRII/X423/analysis/x423_vp_base.i)
[GlobalParams]
density = ${fuel_density}
order = FIRST
family = LAGRANGE
energy_per_fission = 3.2e-11 # J/fission
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
X_Pu = ${fuel_pu}
X_Zr = ${fuel_zr}
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
group_variables = 'disp_x disp_y'
[]
[Mesh]
coord_type = RZ
[gen]
type = FIPDRodletMeshGenerator
fipd_geom_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} / ${pin_id} _design.csv'}
fipd_as_fabricated_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} / ${pin_id} _as_fabricated.csv'}
gap_bottom_length = 0.31e-3 # arbitrary
cladding_bottom_plug_length = 2.24e-3 # arbitrary
cladding_top_plug_length = 2.24e-3 # arbitrary
cladding_sidewall_radial_elements = 10
cladding_sidewall_axial_element_numbers = '2 150 150'
cladding_top_plug_radial_elements = 10
cladding_top_plug_axial_elements = 5
cladding_bottom_plug_radial_elements = 10
cladding_bottom_plug_axial_elements = 5
fuel_radial_elements = 6
fuel_axial_element_intervals = '0 1'
fuel_axial_element_numbers = '150'
use_default_cladding_sidewall_axial_element_intervals = true
elem_type = QUAD4
[]
[]
[Variables]
[temp]
initial_condition = 298
[]
[]
[AuxVariables]
# Aux variables for output
[porosity]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[creep_strain_mag]
order = CONSTANT
family = MONOMIAL
[]
[gap_cond]
order = CONSTANT
family = MONOMIAL
[]
[coolant_htc]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[element_failed]
order = CONSTANT
family = MONOMIAL
[]
[volumetric_strain]
block = fuel
order = CONSTANT
family = MONOMIAL
[]
[hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[hoop_creep_strain]
order = CONSTANT
family = MONOMIAL
[]
[hoop_elastic_strain]
order = CONSTANT
family = MONOMIAL
[]
[total_hoop_strain]
order = CONSTANT
family = MONOMIAL
[]
[func_val1]
[]
[func_val2]
[]
# AuxVariables used for thermal expansion correction
[fuel_thermal_strain_xx]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[fuel_thermal_strain_yy]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[fuel_thm_exp]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[clad_thermal_eigenstrain_xx]
order = CONSTANT
family = MONOMIAL
block = cladding
[]
[clad_thm_exp]
order = CONSTANT
family = MONOMIAL
block = cladding
[]
[]
[Functions] #copied from fipd-tdep
[clad_od_temp]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /clad_od_temp_history_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
[]
[power_history]
type = PiecewiseLinear
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /power_history_ ${pin_id} .csv'}
[]
[pwr_axial_peaking_factors]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /peakingfactor_power_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
[]
[pwr_axial_peaking_factors_elongate]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /peakingfactor_power_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
fuel_elongation_pp = max_fuel_elongation
[]
[fflux_axial_peaking_factors]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /peakingfactor_flux_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
extrapolate_to_zero = true
[]
[fflux_axial_peaking_factors_elongate]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /peakingfactor_flux_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
extrapolate_to_zero = true
fuel_elongation_pp = max_fuel_elongation
[]
[flux_history]
type = PiecewiseLinear
data_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /flux_history_ ${pin_id} .csv'}
[]
[coolant_press_ramp]
type = PiecewiseLinear
x = '0 56465640'
y = '0.151e6 0.151e6'
[]
[id_vpp_func]
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = id_wastage
argument_column = y
wastage_type = ID
value_column = wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[od_vpp_func]
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = od_wastage
argument_column = y
wastage_type = OD
value_column = cc_wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[ci_temp]
type = PiecewiseLinearFromVectorPostprocessor
argument_column = y
component = y
value_column = temp
vectorpostprocessor_name = clad_inn_temp
[]
[na_vol]
type = MeshPropertyFunction
mesh_generator = gen
mesh_property_name = sodium_volume
scale_factor = -1.0
[]
[fuel_height]
type = MeshPropertyFunction
mesh_generator = gen
mesh_property_name = fuel_height
[]
[fuel_radius]
type = MeshPropertyFunction
mesh_generator = gen
mesh_property_name = fuel_radius
[]
[pore_volume_fcn]
type = ParsedFunction
symbol_names = 'volume_fuel interconnected_porosity_fuel_avg'
symbol_values = 'volume_fuel interconnected_porosity_fuel_avg'
expression = '-volume_fuel * interconnected_porosity_fuel_avg'
[]
[anisotropic_swelling_factor]
type = ParsedFunction
symbol_names = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg fuel_height fuel_radius'
symbol_values = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg fuel_height fuel_radius'
expression = '(disp_x_fuel_radial_surface_avg / fuel_radius) / (disp_y_fuel_top_surface_avg / fuel_height)'
[]
[]
# From Topher
[Physics/SolidMechanics/QuasiStatic]
[fuel]
strain = FINITE
add_variables = true
generate_output = 'firstinv_strain stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = fuel
eigenstrain_names = 'fuel_thermal_strain solid_swelling_eigenstrain'
use_automatic_differentiation = true
[]
[clad]
strain = FINITE
add_variables = true
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = cladding
eigenstrain_names = 'clad_swelling clad_thermal_eigenstrain'
use_automatic_differentiation = true
[]
[]
[Kernels]
# Define kernels for the various terms in the PDE system
[gravity]
type = ADGravity
variable = disp_y
value = -9.81
extra_vector_tags = 'ref'
[]
[heat]
type = ADHeatConduction
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie_f]
type = ADHeatConductionTimeDerivative
variable = temp
extra_vector_tags = 'ref'
block = fuel
density_name = density
[]
[heat_ie_c]
type = ADHeatConductionTimeDerivative
variable = temp
extra_vector_tags = 'ref'
block = cladding
density_name = density
[]
[heat_source]
type = ADFissionRateHeatSource
variable = temp
fission_rate = fission_rate
block = fuel
extra_vector_tags = 'ref'
[]
[]
[AuxKernels]
[porosity]
type = ADMaterialRealAux
property = porosity
variable = porosity
block = fuel
[]
[conductance]
type = MaterialRealAux
property = gap_conductance
variable = gap_cond
boundary = fuel_outer_radial_surface
[]
[cdf_amount]
block = cladding
type = MaterialRealAux
property = cdf_failure
variable = cumulative_damage_index
[]
[failed_element]
boundary = 'cladding_outside_right'
type = MaterialRealAux
property = failed
variable = element_failed
[]
[volumetric_strain]
type = ADRankTwoScalarAux
rank_two_tensor = total_strain
variable = volumetric_strain
scalar_type = VolumetricStrain
execute_on = timestep_end
block = fuel
[]
[hoop_stress]
type = ADRankTwoAux
rank_two_tensor = stress
variable = hoop_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[hoop_creep_strain]
type = ADRankTwoAux
rank_two_tensor = creep_strain
variable = hoop_creep_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = cladding
[]
[hoop_elastic_strain]
type = ADRankTwoAux
rank_two_tensor = elastic_strain
variable = hoop_elastic_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = cladding
[]
[total_hoop_strain]
type = ADRankTwoAux
rank_two_tensor = total_strain
variable = total_hoop_strain
index_j = 2
index_i = 2
execute_on = timestep_end
block = cladding
[]
[func_val1]
type = FunctionAux
function = id_vpp_func
variable = func_val1
block = cladding
[]
[func_val2]
type = FunctionAux
function = od_vpp_func
variable = func_val2
block = cladding
[]
[fuel_thermal_strain_xx]
type = ADRankTwoAux
rank_two_tensor = fuel_thermal_strain
variable = fuel_thermal_strain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = fuel
[]
[fuel_thermal_strain_yy]
type = ADRankTwoAux
rank_two_tensor = fuel_thermal_strain
variable = fuel_thermal_strain_yy
index_j = 1
index_i = 1
execute_on = 'initial timestep_end'
block = fuel
[]
[fuel_thm_exp]
type = SpatialUserObjectAux
variable = fuel_thm_exp
execute_on = 'initial timestep_end'
user_object = fuel_thm_exp
block = fuel
[]
[clad_thermal_eigenstrain_xx]
type = ADRankTwoAux
rank_two_tensor = clad_thermal_eigenstrain
variable = clad_thermal_eigenstrain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = cladding
[]
[clad_thm_exp]
type = SpatialUserObjectAux
variable = clad_thm_exp
execute_on = 'initial timestep_end'
user_object = clad_thm_exp
block = cladding
[]
[]
[Contact]
[pellet_clad_mechanical]
primary = cladding_inside_right
secondary = fuel_outer_radial_surface
penalty = 1e12
model = frictionless
#system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
normal_smoothing_distance = 0.1
[]
[]
[ThermalContact]
[thermal_contact]
type = GapHeatTransfer
variable = temp
primary = cladding_inside_right
secondary = fuel_outer_radial_surface
quadrature = true
gap_conductivity = 61.0
min_gap = 0.5e-03
[]
[]
[BCs]
[no_x_all]
type = ADDirichletBC
variable = disp_x
boundary = centerline
value = 0.0
[]
[no_y_fuel]
type = ADDirichletBC
variable = disp_y
boundary = fuel_bottom
value = 0.0
[]
[no_y_clad]
type = ADDirichletBC
variable = disp_y
boundary = cladding_outside_bottom
value = 0.0
[]
[fuel_top_temp]
type = ADFunctionDirichletBC
boundary = fuel_top
variable = temp
function = ci_temp
[]
[surf] #copied from fipd-tdep
type = ADFunctionDirichletBC
variable = temp
boundary = 'cladding_outside_bottom cladding_outside_right cladding_outside_top'
function = clad_od_temp
[]
[Pressure]
[coolantPressure]
boundary = 'cladding_outside_bottom cladding_outside_right cladding_outside_top'
function = coolant_press_ramp
use_automatic_differentiation = true
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 'fuel_outside_all cladding_inside_all'
initial_pressure = 0.084e6 # Pa
startup_time = 0
R = 8.3143
temperature = ave_temp_interior
volume = gas_volume
output = plenum_pressure
material_input = fg_released
additional_volumes = volume_pore
temperature_of_additional_volumes = temp_fuel_avg
use_automatic_differentiation = true
[]
[]
[]
[Materials]
[interconnected_porosity] # Topher
type = ADParsedMaterial
property_name = interconnected_porosity
material_property_names = 'porosity interconnectivity'
expression = 'porosity * interconnectivity'
outputs = all
block = fuel
[]
[porosity] # Topher
type = ADPorosityFromStrain
block = fuel
initial_porosity = 1e-10
inelastic_strain = 'combined_inelastic_strain'
outputs = none
[]
[gas_swelling] # Topher
type = ADSimpleFissionGasViscoplasticityStressUpdate
temperature = temp
outputs = all
block = fuel
bubble_concentration = 1e15
initial_bubble_concentration = 1e15
compute_interconnectivity = true
fission_gas_yield = 0.3017
fission_rate = fission_rate
initial_atoms_per_bubble = 1e-05
initial_bubble_radius = 1e-15
initial_fgm_dissolved = 0
interconnection_cutoff = 0.999
interconnection_initiating_porosity = 0.26
interconnection_terminating_porosity = 0.28
max_inelastic_increment = 0.001
retained_gas_fraction = 0.25
interconnection_dependent_retained_gas_fraction = 0.5
surface_energy = 1.6
anisotropic_factor = 0.26
initial_porosity = 1e-10
[]
[solid_swelling] # Topher
type = ADBurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = fuel
swelling_name = 'solid_swelling'
outputs = all
anisotropic_factor = 0.26
[]
[sodium_logging]
type = ADUPuZrSodiumLogging
block = fuel
porosity = porosity
interconnectivity = interconnectivity
sodium_infiltration_fraction = 0.08
outputs = all
[]
[fission_rate]
type = ADUPuZrFissionRate
block = fuel
rod_linear_power = power_history
axial_power_profile = pwr_axial_peaking_factors
use_metadata = true
mesh_generator = gen
outputs = all
[]
[fission_rate_elongate]
type = ADUPuZrFissionRate
block = cladding
fission_rate_name = fission_rate
rod_linear_power = power_history
axial_power_profile = pwr_axial_peaking_factors_elongate
use_metadata = true
mesh_generator = gen
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
initial_X_Pu = ${fuel_pu}
initial_X_Zr = ${fuel_zr}
density = ${fuel_density}
outputs = all
block = fuel
[]
[burnup_elongate]
type = ADUPuZrBurnup
initial_X_Pu = ${fuel_pu}
initial_X_Zr = ${fuel_zr}
density = ${fuel_density}
outputs = all
block = cladding
burnup_name = burnup
[]
[fast_neutron_flux]
type = ADFastNeutronFlux
calculate_fluence = true
rod_ave_lin_pow = flux_history
axial_power_profile = fflux_axial_peaking_factors
block = fuel
factor = 1.0
outputs = all
[]
[fast_neutron_flux_elongate]
type = ADFastNeutronFlux
calculate_fluence = true
rod_ave_lin_pow = flux_history
axial_power_profile = fflux_axial_peaking_factors_elongate
block = cladding
factor = 1.0
outputs = all
[]
[fuel_elasticity_tensor]
type = ADUPuZrElasticityTensor
block = fuel
temperature = temp
use_old_porosity = true
[]
[fuel_elastic_stress]
type = ADComputeMultipleInelasticStress
# tangent_operator = nonlinear
inelastic_models = 'fuel_upuzrcreep gas_swelling'
block = fuel
outputs = all
[]
[fuel_upuzrcreep]
type = ADUPuZrCreepUpdate
block = fuel
temperature = temp
porosity = porosity
max_inelastic_increment = 2e-3
use_old_porosity = true
[]
[fuel_thermal_expansion]
type = ADComputeThermalExpansionEigenstrain
block = fuel
thermal_expansion_coeff = 1.18e-5
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = fuel_thermal_strain
outputs = all
[]
[metal_fuel_thermal]
type = ADUPuZrThermal
block = fuel
spheat_model = savage
thcond_model = lanl
porosity = porosity
temperature = temp
[]
[fuel_density]
type = ADStrainAdjustedDensity
displacements = 'disp_x disp_y'
block = fuel
strain_free_density = ${fuel_density}
[]
[clad_elasticity_tensor]
type = ADD9ElasticityTensor
temperature = temp
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
block = cladding
[]
[clad_stress]
type = ADComputeMultipleInelasticStress
# tangent_operator = nonlinear
inelastic_models = 'clad_ss316creep'
block = cladding
[]
[clad_ss316creep]
type = ADD9CreepUpdate
block = cladding
temperature = temp
fast_neutron_flux = fast_neutron_flux
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
[]
[clad_swelling]
type = ADSS316VolumetricSwellingEigenstrain
eigenstrain_name = clad_swelling
fast_neutron_fluence = fast_neutron_fluence
fast_neutron_flux = fast_neutron_flux
temperature = temp
outputs = all
[]
[thermal_expansion]
type = ADD9ThermalExpansionEigenstrain
block = cladding
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = clad_thermal_eigenstrain
outputs = all
[]
[clad_thermal]
type = ADD9Thermal
block = cladding
temperature = temp
[]
[clad_density]
type = ADStrainAdjustedDensity
block = cladding
strain_free_density = 7874.0
[]
[longSS316_failure]
type = D9FailureClad
block = cladding
method = steady_state
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = flux_ss316
temperature = temp
scale_factor = 1
boundary = cladding_inside_right
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = SS316
use_effective_method = true
temperature = temp
scale_factor = 1
boundary = cladding_outside_right
outputs = all
[]
[]
[Dampers]
[disp_x]
type = MaxIncrement
variable = disp_x
max_increment = 1e-3
[]
[disp_y]
type = MaxIncrement
variable = disp_y
max_increment = 1e-3
[]
[temp]
type = MaxIncrement
variable = temp
max_increment = 50
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -ksp_gmres_restart'
petsc_options_value = 'lu superlu_dist 51'
line_search = 'none'
l_max_its = 100
l_tol = 1e-3
nl_max_its = 50
nl_rel_tol = 1e-5
nl_abs_tol = 1e-7
end_time = ${time_last}
dtmin = 1
dtmax = ${max_dt}
automatic_scaling = true
compute_scaling_once = false
[Quadrature]
order = fifth
side_order = seventh
[]
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = power_history
#max_function_change = 300 # Removed to decrease run time
timestep_limiting_postprocessor = creep_timestep
dt = 100
iteration_window = 2
optimal_iterations = 10
force_step_every_function_point = true
[]
[]
[Postprocessors]
[_dt]
type = TimestepSize
outputs = 'csv_general console'
[]
[num_lin_it]
type = NumLinearIterations
outputs = csv_general
[]
[num_nonlin_it]
type = NumNonlinearIterations
outputs = csv_general
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
outputs = csv_general
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
outputs = csv_general
[]
[alive_time]
type = PerfGraphData
section_name = Root
data_type = TOTAL
outputs = csv_general
[]
[ave_temp_interior]
type = SideAverageValue
boundary = cladding_inside_top
variable = temp
execute_on = 'initial linear'
outputs = csv_general
[]
[approx_FCT]
type = AverageNodalVariableValue
boundary = centerline
variable = temp
outputs = csv_general
[]
[max_approx_FCT]
type = TimeExtremeValue
value_type = max
postprocessor = approx_FCT
outputs = csv_general
[]
[ave_FST]
type = SideAverageValue
boundary = fuel_outer_radial_surface
variable = temp
outputs = csv_general
[]
[max_ave_FST]
type = TimeExtremeValue
value_type = max
postprocessor = ave_FST
outputs = csv_general
[]
[ave_CIT]
type = SideAverageValue
boundary = cladding_inside_right
variable = temp
outputs = csv_general
[]
[max_ave_CIT]
type = TimeExtremeValue
value_type = max
postprocessor = ave_CIT
outputs = csv_general
[]
[avg_clad_temp]
type = ElementAverageValue
variable = temp
block = cladding
outputs = csv_general
[]
[peak_clad_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = cladding
outputs = csv_general
[]
[peak_fuel_temp]
type = ElementExtremeValue
variable = temp
value_type = max
block = fuel
outputs = csv_general
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = max
block = fuel
outputs = csv_general
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = fuel
outputs = csv_general
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = fuel
outputs = csv_general
[]
[peak_porosity]
type = ElementExtremeValue
variable = porosity
value_type = max
block = fuel
outputs = csv_general
[]
[clad_inner_vol]
type = InternalVolume
boundary = cladding_inside_all
outputs = csv_general
[]
[pellet_volume]
type = InternalVolume
boundary = fuel_outside_all
outputs = csv_general
[]
[gas_volume]
type = InternalVolume
boundary = 'fuel_outside_all cladding_inside_all'
execute_on = 'initial timestep_end'
addition = na_vol
outputs = csv_general
[]
[clad_fuel_gap]
type = NodalExtremeValue
variable = penetration
boundary = fuel_outer_radial_surface
outputs = csv_general
[]
[max_cont_press]
type = NodalExtremeValue
variable = contact_pressure
boundary = fuel_outer_radial_surface
outputs = csv_general
[]
[flux_from_clad]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = cladding_inside_right
diffusivity = thermal_conductivity
outputs = csv_general
[]
[flux_from_fuel]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = fuel_outer_radial_surface
diffusivity = thermal_conductivity
outputs = csv_general
[]
[rod_total_power]
type = ADElementIntegralPower
variable = temp
use_material_fission_rate = true
fission_rate_material = fission_rate
block = fuel
outputs = csv_general
[]
[LHGR_W_per_cm]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
outputs = csv_general
[]
[average_burnup]
type = ElementAverageValue
block = fuel
variable = burnup
outputs = csv_general
[]
[max_cdf]
type = ElementExtremeValue
value_type = max
variable = cumulative_damage_index
outputs = csv_general
[]
# fission gas information (Topher)
[fg_produced]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_produced
block = fuel
outputs = csv_general
[]
[fg_released]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_released
block = fuel
execute_on = 'initial timestep_end'
outputs = csv_general
[]
[fg_percent]
type = FGRPercent
fission_gas_released = fg_released
fission_gas_generated = fg_produced
outputs = csv_general
[]
[interconnected_porosity_fuel_avg]
type = ElementAverageValue
variable = interconnected_porosity
block = fuel
execute_on = 'initial timestep_end'
outputs = csv_general
[]
[porosity_fuel_avg]
type = ElementAverageValue
variable = porosity
block = fuel
outputs = csv_general
[]
[porosity_fuel_max]
type = ElementExtremeValue
variable = porosity
block = fuel
outputs = csv_general
[]
[porosity_fuel_min]
type = ElementExtremeValue
variable = porosity
value_type = min
block = fuel
outputs = csv_general
[]
[creep_timestep]
type = MaterialTimeStepPostprocessor
block = fuel
outputs = 'csv_general console'
[]
[hydrostatic_stress]
type = ElementAverageValue
variable = hydrostatic_stress
execute_on = 'initial timestep_end'
block = fuel
outputs = csv_general
[]
[volumetric_strain]
type = ElementAverageValue
variable = volumetric_strain
block = fuel
outputs = csv_general
[]
[fission_rate]
type = ElementAverageValue
variable = fission_rate
block = fuel
outputs = csv_general
[]
[porosity]
type = ElementAverageValue
variable = porosity
block = fuel
outputs = csv_general
[]
[max_clad_hoop_creep]
type = ElementExtremeValue
value_type = max
block = cladding
variable = hoop_creep_strain
outputs = csv_general
[]
[max_clad_creep_strain_mag]
type = ElementExtremeValue
value_type = max
block = cladding
variable = creep_strain_mag
outputs = csv_general
[]
[max_total_hoop_strain]
type = ElementExtremeValue
value_type = max
block = cladding
variable = total_hoop_strain
outputs = csv_general
[]
[max_fuel_elongation]
type = NodalExtremeValue
variable = disp_y
boundary = fuel_outside_all
outputs = csv_general
[]
[avg_fuel_ax_thm_str]
type = AxisymmetricCenterlineAverageValue
variable = fuel_thermal_strain_yy
boundary = fuel_inner_radial_surface
outputs = csv_general
[]
[max_clad_elongation]
type = NodalExtremeValue
variable = disp_y
boundary = 'cladding_outside_top cladding_outside_right'
outputs = csv_general
[]
[max_wastagethickness]
type = ElementExtremeValue
value_type = max
variable = wastage_thickness
outputs = 'console'
[]
[avg_fuel_temp]
type = ElementAverageValue
variable = temp
block = fuel
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = csv_general
[]
# Fuel strain information (Topher)
[strain_solid_swelling_fuel_avg]
type = ElementAverageValue
variable = solid_swelling
block = fuel
outputs = csv_general
[]
[strain_gas_swelling_fuel_avg]
type = ElementAverageValue
variable = effective_fission_gas_strain
block = fuel
outputs = csv_general
[]
[strain_volumetric_fuel_avg]
type = ElementAverageValue
variable = firstinv_strain
block = fuel
outputs = csv_general
[]
[volume_fuel]
type = InternalVolume
boundary = 'fuel_outside_all'
execute_on = 'initial timestep_end'
outputs = csv_general
[]
[disp_x_fuel_radial_surface_avg]
type = SideAverageValue
variable = disp_x
boundary = 'fuel_outside_all'
outputs = csv_general
[]
[disp_y_fuel_top_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_top'
outputs = csv_general
[]
[temp_fuel_avg]
type = ElementAverageValue
variable = temp
block = fuel
execute_on = 'initial timestep_end'
outputs = csv_general
[]
[volume_pore]
type = FunctionValuePostprocessor
function = pore_volume_fcn
execute_on = 'initial timestep_end'
outputs = csv_general
[]
[]
[VectorPostprocessors]
[clad_x_disp]
type = NodalValueSampler
variable = disp_x
boundary = cladding_outside_right
sort_by = y
outputs = none
[]
[fuel_cl_temp]
type = NodalValueSampler
variable = temp
boundary = centerline
sort_by = y
outputs = none
[]
[fuel_surf_temp]
type = NodalValueSampler
variable = temp
boundary = fuel_outer_radial_surface
sort_by = y
outputs = none
[]
[clad_inn_temp]
type = NodalValueSampler
variable = temp
boundary = cladding_inside_right
sort_by = y
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[clad_out_temp]
type = NodalValueSampler
variable = temp
boundary = cladding_outside_right
sort_by = y
outputs = none
[]
[id_wastage]
type = FuelRodLineValueSampler
variable = wastage_thickness
material = 'clad'
fraction = 0.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[od_wastage]
type = FuelRodLineValueSampler
variable = cc_wastage_thickness
material = 'clad'
fraction = 1.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
# PIE Comparison VPPs
[nrad_comparison_0]
type = FIPDAxialPIEComparison
boundary = fuel_outer_radial_surface
sort_by = y
csv_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /X423_ ${pin_id} _NRAD.csv'}
variable = disp_x
thermal_strain_variable = fuel_thm_exp
involved_component = fuel
mesh_generator = gen
series_type_to_read = 'Fuel O.D. (mils)'
outputs = csv_vpp_0
enable = ${enable_0}
execute_on = 'initial timestep_end'
extra_pp_output_name = 'extra_csv extra_csv_0'
max_fuel_elongation_pp_name = max_fuel_elongation
avg_fuel_ax_thm_str_pp_name = avg_fuel_ax_thm_str
gas_swelling_pp_name = strain_gas_swelling_fuel_avg
solid_swelling_pp_name = strain_solid_swelling_fuel_avg
[]
[nrad_comparison_a]
type = FIPDAxialPIEComparison
boundary = fuel_outer_radial_surface
sort_by = y
csv_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /X423A_ ${pin_id} _NRAD.csv'}
variable = disp_x
thermal_strain_variable = fuel_thm_exp
involved_component = fuel
mesh_generator = gen
series_type_to_read = 'Fuel O.D. (mils)'
outputs = csv_vpp_a
enable = ${enable_a}
execute_on = 'initial timestep_end'
extra_pp_output_name = 'extra_csv extra_csv_a'
max_fuel_elongation_pp_name = max_fuel_elongation
avg_fuel_ax_thm_str_pp_name = avg_fuel_ax_thm_str
gas_swelling_pp_name = strain_gas_swelling_fuel_avg
solid_swelling_pp_name = strain_solid_swelling_fuel_avg
[]
[nrad_comparison_b]
type = FIPDAxialPIEComparison
boundary = fuel_outer_radial_surface
sort_by = y
csv_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /X423B_ ${pin_id} _NRAD.csv'}
variable = disp_x
thermal_strain_variable = fuel_thm_exp
involved_component = fuel
mesh_generator = gen
series_type_to_read = 'Fuel O.D. (mils)'
outputs = csv_vpp_b
enable = ${enable_b}
execute_on = 'initial timestep_end'
extra_pp_output_name = 'extra_csv extra_csv_b'
max_fuel_elongation_pp_name = max_fuel_elongation
avg_fuel_ax_thm_str_pp_name = avg_fuel_ax_thm_str
gas_swelling_pp_name = strain_gas_swelling_fuel_avg
solid_swelling_pp_name = strain_solid_swelling_fuel_avg
[]
[nrad_comparison_c]
type = FIPDAxialPIEComparison
boundary = fuel_outer_radial_surface
sort_by = y
csv_file = ${raw '../../../../../../fipd-bison-integration-data/X423/ ${pin_id} /X423C_ ${pin_id} _NRAD.csv'}
variable = disp_x
thermal_strain_variable = fuel_thm_exp
involved_component = fuel
mesh_generator = gen
series_type_to_read = 'Fuel O.D. (mils)'
outputs = csv_vpp_c
enable = ${enable_c}
execute_on = 'initial timestep_end'
extra_pp_output_name = 'extra_csv extra_csv_c'
max_fuel_elongation_pp_name = max_fuel_elongation
avg_fuel_ax_thm_str_pp_name = avg_fuel_ax_thm_str
gas_swelling_pp_name = strain_gas_swelling_fuel_avg
solid_swelling_pp_name = strain_solid_swelling_fuel_avg
[]
[]
[UserObjects]
[pin_geometry]
type = FuelPinGeometry
clad_bottom = cladding_outside_bottom
clad_inner_wall = cladding_inside_right
clad_outer_wall = cladding_outside_right
clad_top = cladding_outside_top
pellet_exteriors = fuel_outside_all
[]
[fuel_thm_exp]
type = LayeredAverage
variable = fuel_thermal_strain_xx
direction = y
num_layers = 1000
block = fuel
[]
[clad_thm_exp]
type = LayeredAverage
variable = clad_thermal_eigenstrain_xx
direction = y
num_layers = 1000
block = cladding
[]
[]
[Outputs]
perf_graph = true
color = false
[console]
type = Console
max_rows = 25
time_step_interval = 1
output_linear = true
sync_times = ${time_spots}
[]
[csv_vpp_0]
type = CSV
sync_only = true
sync_times = ${time_spots_0}
enable = ${enable_0}
create_latest_symlink = true
[]
[csv_vpp_a]
type = CSV
sync_only = true
sync_times = ${time_spots_a}
enable = ${enable_a}
create_latest_symlink = true
[]
[csv_vpp_b]
type = CSV
sync_only = true
sync_times = ${time_spots_b}
enable = ${enable_b}
create_latest_symlink = true
[]
[csv_vpp_c]
type = CSV
sync_only = true
sync_times = ${time_spots_c}
enable = ${enable_c}
create_latest_symlink = true
[]
[csv_general]
type = CSV
sync_times = ${time_spots}
[]
[extra_csv]
type = CSV
sync_only = true
sync_times = ${time_spots_extra}
[]
[extra_csv_0]
type = CSV
sync_only = true
sync_times = ${time_spots_0}
enable = ${enable_0}
[]
[extra_csv_a]
type = CSV
sync_only = true
sync_times = ${time_spots_a}
enable = ${enable_a}
[]
[extra_csv_b]
type = CSV
sync_only = true
sync_times = ${time_spots_b}
enable = ${enable_b}
[]
[extra_csv_c]
type = CSV
sync_only = true
sync_times = ${time_spots_c}
enable = ${enable_c}
[]
[exodus]
type = Exodus
sync_only = true
sync_times = ${time_spots}
[]
[]
(test/tests/ADMetallicFuelWastage/ad_burnup_ht9_legacy-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (burnup_ht9_legacy)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[wastage]
type = ADMetallicFuelWastage
method = burnup_ht9_legacy
temperature = temp
fast_neutron_flux = 0.0
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(test/tests/ADMetallicFuelWastage/ad_burnup_ht9_opt-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (burnup_ht9_opt)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[wastage]
type = ADMetallicFuelWastage
method = burnup_ht9_opt
temperature = temp
fast_neutron_flux = 0.0
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(test/tests/ADMetallicFuelWastage/ad_flux_d9-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (flux_d9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[]
[Materials]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_d9
temperature = temp
burnup = 0.0
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(test/tests/ADMetallicFuelWastage/ad_burnup_ht9_gap.i)
# This test is to verify the calculation in ADMetallicFuelWastage (burnup_ht9_gap)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Functions]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[penetration_depth]
type = ConstantFunction
value = 0.0
[]
[rind_burnup_delay]
type = ConstantFunction
value = 0.0
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[wastage]
type = ADMetallicFuelWastage
method = burnup_ht9_gap
temperature = temp
penetration_depth = penetration_depth
rind_burnup_delay = rind_burnup_delay
fast_neutron_flux = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[fsnrate_avg]
type = ElementAverageValue
variable = fission_rate
[]
[burnup_avg]
type = ElementAverageValue
variable = burnup
[]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[]
[Outputs]
csv = true
[]
(test/tests/ADMetallicFuelWastage/ad_burnup_ht9_gap-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (burnup_ht9_gap)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[penetration_depth]
type = ConstantFunction
value = 0.0
[]
[rind_burnup_delay]
type = ConstantFunction
value = 0.0
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[wastage]
type = ADMetallicFuelWastage
method = burnup_ht9_gap
temperature = temp
penetration_depth = penetration_depth
rind_burnup_delay = rind_burnup_delay
fast_neutron_flux = 0.0
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(assessment/metallic_fuel/WPF/analysis/X425_T418/X425_base.i)
# X425 Steady State Irradiation Base Input File
gap_bottom_length = 0.31e-3
top_bot_cladding_height = 2.24e-3
# calculations
cladding_ir = '${fparse fuel_radius + cladding_gap_width}'
gas_plenum_height = '${fparse plenum_volume / pi / cladding_ir^2}'
fuel_y_start = '${fparse gap_bottom_length + top_bot_cladding_height}'
alpha_start = 877
alpha_end = 936
bubble_concentration = 1e15
cladding_block = 'cladding cladding_tri'
# A relatively coarse radial mesh density can be used
# since localized refining is done by TRI3 elements
clad_n_rad = 10
[GlobalParams]
order = FIRST
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x disp_y'
alpha_transition_end = ${alpha_end}
alpha_transition_start = ${alpha_start}
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
group_variables = 'disp_x disp_y'
converge_on = 'disp_x disp_y temp'
[]
[Mesh]
# Pin design parameters from FIPD database
[gen]
type = FIPDRodletMeshGenerator
fipd_geom_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} / ${pin_id} _design.csv'}
gap_bottom_length = 0.31e-3 # arbitrary
cladding_bottom_plug_length = 2.24e-3 # arbitrary
cladding_top_plug_length = 2.24e-3 # arbitrary
cladding_sidewall_radial_elements = ${clad_n_rad}
cladding_sidewall_axial_element_intervals = '0 0.540 0.625 1.0'
cladding_sidewall_axial_element_numbers = '150 1000 150'
use_tri_for_cladding_sidewall = '0 1 0'
cladding_top_plug_radial_elements = 10
cladding_top_plug_axial_elements = 5
cladding_bottom_plug_axial_elements = 5
fuel_radial_elements = 10
fuel_axial_element_intervals = '0 1'
fuel_axial_element_numbers = '1000'
tri_element_size_factor = 0.4
elem_type = QUAD4
make_stand = true
make_cap = true
cap_axial_elements = 15
stand_axial_elements = 15
[]
[sodium_height]
type = SideSetsFromBoundingBoxGenerator
input = gen
bottom_left = '0 0 0'
top_right = '${fparse cladding_ir + cladding_thickness} ${fparse fuel_y_start + fuel_height} 0'
included_boundaries = 'cladding_inside_right'
boundary_new = '1005'
[]
[gas_height]
type = SideSetsFromBoundingBoxGenerator
input = sodium_height
bottom_left = '0 ${fparse fuel_y_start + fuel_height} 0'
top_right = '${fparse cladding_ir + cladding_thickness} ${fparse fuel_y_start + fuel_height + gas_plenum_height + top_bot_cladding_height} 0'
included_boundaries = 'cladding_inside_right'
boundary_new = '1006'
[]
[sodium_plenum_rename]
type = RenameBoundaryGenerator
input = gas_height
old_boundary = '1005 1006'
new_boundary = 'sodium_height gas_height'
[]
patch_size = 40
patch_update_strategy = always
partitioner = centroid
centroid_partitioner_direction = y
coord_type = RZ
[]
[Variables]
[temp]
initial_condition = 298
block = 'fuel ${cladding_block} cap stand'
[]
[disp_x]
block = 'fuel ${cladding_block} cap stand'
[]
[disp_y]
block = 'fuel ${cladding_block} cap stand'
[]
[]
[Functions]
[fflux_axial_peaking_factors] # Fast flux peaking factor from FIPD database; used for fuel related simulations
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /peakingfactor_flux_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
extrapolate_to_zero = true
[]
[fflux_axial_peaking_factors_elongate] # Fast flux peaking factor from FIPD database; used for cladding related simulations
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /peakingfactor_flux_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
extrapolate_to_zero = true
fuel_elongation_pp = max_fuel_elongation # pp used to track fuel elongation
[]
[flux_history] # Time-dependent pin average fast flux from FIPD database
type = PiecewiseLinear
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /flux_history_ ${pin_id} .csv'}
[]
[clad_od_temp] # Time-dependent cladding OD temperature from FIPD database
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /clad_od_temp_history_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
[]
[ab_sodium_vol]
type = MeshPropertyFunction
mesh_generator = gen
mesh_property_name = sodium_volume
scale_factor = -1.0
[]
[sodium_volume]
# Need to account for the factor that hot pressing is also occupying the open pores
type = ParsedFunction
symbol_names = 'porosity_sodium_logging_avg volume_fuel raw_sodium_vol temp_sodium_avg'
symbol_values = 'porosity_sodium_logging_avg volume_fuel ab_sodium_vol temp_sodium_avg'
# Note the the symbol before volume_fuel should be negative as volume_fuel itself is negative
expression = 'raw_sodium_vol * 954 / (1012 - 0.23 * temp_sodium_avg) - volume_fuel * porosity_sodium_logging_avg'
[]
[power_history] # Time-dependent pin average power from FIPD database
type = PiecewiseLinear
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /power_history_ ${pin_id} .csv'}
[]
[axial_peaking_factors]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /peakingfactor_power_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
[]
[axial_peaking_factors_extended]
type = FIPDAxialProfileFunction
data_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} /peakingfactor_power_relative_ ${pin_id} .csv'}
use_metadata = true
mesh_generator = gen
zero_ends = true
data_shift_type = peaking
fuel_elongation_pp = max_fuel_elongation # pp used to track fuel elongation
[]
[anisotropic_swelling_factor]
type = ParsedFunction
symbol_names = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg fuel_height fuel_radius'
symbol_values = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg ${fuel_height} ${fuel_radius}'
expression = '(disp_x_fuel_radial_surface_avg / ${fuel_radius}) / (disp_y_fuel_top_surface_avg / ${fuel_height})'
[]
[gap_thermal_conductivity]
type = ParsedFunction
expression = '124.67 - 0.11381 * t + 5.5226e-5 * t^2 - 1.1842e-8 * t^3'
[]
[id_vpp_func] # vpp_function used to track FCCI-related cladding degradation.
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = id_wastage
argument_column = y
wastage_type = ID
value_column = wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[od_vpp_func] # vpp_function used to track CCCI-related cladding degradation.
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = od_wastage
argument_column = y
wastage_type = OD
value_column = cc_wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[fuel_melt_func]
type = MetallicFuelMeltingFunction
vectorpostprocessor_name = fuel_melting
argument_column = y
value_column = fuel_melting_thickness
use_metadata = true
mesh_generator = 'gen'
transition_width = 2e-4
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[fuel]
block = fuel
strain = FINITE
generate_output = 'firstinv_strain stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
eigenstrain_names = 'fuel_thermal_strain solid_swelling_eigenstrain'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[cladding]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = '${cladding_block}'
eigenstrain_names = 'cladding_thermal_eigenstrain'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[]
[Kernels]
[gravity]
type = ADGravity
block = 'fuel ${cladding_block}'
variable = disp_y
value = -9.81
extra_vector_tags = 'ref'
[]
[heat]
type = ADHeatConduction
block = 'fuel ${cladding_block} cap stand'
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie]
type = ADHeatConductionTimeDerivative
block = 'fuel ${cladding_block} cap stand'
variable = temp
extra_vector_tags = 'ref'
[]
[heat_source]
type = ADFissionRateHeatSource
variable = temp
block = 'fuel'
fission_rate = fission_rate
extra_vector_tags = 'ref'
energy_deposited_in_fuel = 0.95
[]
[disp_x_dt]
type = ADTimeDerivative
variable = disp_x
block = ' cap stand'
extra_vector_tags = 'ref'
[]
[disp_y_dt]
type = ADTimeDerivative
variable = disp_y
block = 'cap stand'
extra_vector_tags = 'ref'
[]
[disp_x_diff]
type = ADMatAnisoDiffusion
variable = disp_x
block = 'cap stand'
diffusivity = d_x
extra_vector_tags = 'ref'
[]
[disp_y_diff]
type = ADMatDiffusion
variable = disp_y
block = 'cap stand'
diffusivity = 1e8
extra_vector_tags = 'ref'
[]
[]
[UserObjects]
[pin_geometry]
type = FuelPinGeometry
clad_bottom = cladding_outside_bottom
clad_inner_wall = cladding_inside_right
clad_outer_wall = cladding_outside_right
clad_top = cladding_outside_top
pellet_exteriors = fuel_outside_all
[]
[fuel_thm_exp]
type = LayeredAverage
variable = fuel_thermal_strain_xx
direction = y
num_layers = 1000
block = fuel
[]
[clad_thm_exp]
type = LayeredAverage
variable = clad_thermal_eigenstrain_xx
direction = y
num_layers = 1000
block = ${cladding_block}
[]
[]
[Contact]
[fuel_cladding_mechanical]
primary = cladding_inside_right
secondary = fuel_outer_radial_surface
model = coulomb
friction_coefficient = 0.1
formulation = mortar
c_normal = '${fparse 1e17 * magic_factor}'
c_tangential = '${fparse 1e19 * magic_factor}'
correct_edge_dropping = true
[]
[]
[MortarGapHeatTransfer]
[inside2outside]
temperature = temp
boundary = 'cladding_inside_right'
gap_conductivity_function = gap_thermal_conductivity
gap_conductivity_function_variable = temp
primary_boundary = cladding_inside_right
secondary_boundary = fuel_contact_surfaces
gap_flux_options = 'CONDUCTION'
ghost_point_neighbors = true
[]
[]
[BCs]
[no_x_all]
type = ADDirichletBC
variable = disp_x
boundary = 'centerline cap_top'
value = 0.0
preset = false
[]
[no_y_clad]
type = ADDirichletBC
variable = disp_y
boundary = 'cladding_inside_bottom'
value = 0.0
preset = false
[]
[Pressure]
[coolantPressure]
boundary = 'cladding_outside_right'
factor = 0.151e6
use_automatic_differentiation = true
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 'inside_surfaces'
initial_pressure = 84116 # in Pa, 12.2 psi
startup_time = 0
R = 8.3143
temperature = temp_gas_avg
volume = volume_plenum
output = plenum_pressure
material_input = fg_released
use_automatic_differentiation = true
[]
[]
[surf] # Setting temperature BC base on FIPD data
type = ADFunctionDirichletBC
variable = temp
boundary = 'cladding_outside_bottom cladding_outside_right cladding_outside_top'
function = clad_od_temp
[]
[]
[AuxVariables]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[relx]
[]
[clad_thm_exp]
order = CONSTANT
family = MONOMIAL
block = '${cladding_block}'
[]
[clad_thermal_eigenstrain_xx]
order = CONSTANT
family = MONOMIAL
block = '${cladding_block}'
[]
[fuel_thermal_strain_xx]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[fuel_thermal_strain_yy]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[fuel_thm_exp]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[func_val1]
[]
[func_val2]
[]
[func_val3]
[]
# OPTD Dummy during this stage
[pen_thick_aux]
family = MONOMIAL
order = CONSTANT
block = 'fuel ${cladding_block}'
[]
[total_id_reduction]
family = MONOMIAL
order = CONSTANT
block = 'fuel ${cladding_block}'
[]
[fast_neutron_fluence_aux]
order = CONSTANT
family = MONOMIAL
block = '${cladding_block}'
[]
[]
[AuxKernels]
[func_val1]
type = FunctionAux
function = id_vpp_func
variable = func_val1
block = 'cladding cladding_tri'
[]
[func_val2]
type = FunctionAux
function = od_vpp_func
variable = func_val2
block = 'cladding cladding_tri'
[]
[func_val3]
type = FunctionAux
function = fuel_melt_func
variable = func_val3
block = fuel
[]
[cdf_amount]
block = '${cladding_block}'
type = MaterialRealAux
property = cdf_failure
variable = cumulative_damage_index
[]
[relx_aux]
type = ParsedAux
variable = relx
block = fuel
use_xyzt = true
expression = 'x / ${fuel_radius}'
[]
[clad_thm_exp]
type = SpatialUserObjectAux
variable = clad_thm_exp
execute_on = 'initial timestep_end'
user_object = clad_thm_exp
block = '${cladding_block}'
[]
[clad_thermal_eigenstrain_xx]
type = ADRankTwoAux
rank_two_tensor = cladding_thermal_eigenstrain
variable = clad_thermal_eigenstrain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = '${cladding_block}'
[]
[fuel_thermal_strain_xx]
type = ADRankTwoAux
rank_two_tensor = fuel_thermal_strain
variable = fuel_thermal_strain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = fuel
[]
[fuel_thermal_strain_yy]
type = ADRankTwoAux
rank_two_tensor = fuel_thermal_strain
variable = fuel_thermal_strain_yy
index_j = 1
index_i = 1
execute_on = 'initial timestep_end'
block = fuel
[]
[fuel_thm_exp]
type = SpatialUserObjectAux
variable = fuel_thm_exp
execute_on = 'initial timestep_end'
user_object = fuel_thm_exp
block = fuel
[]
# OPTD
[assign_pen_thick_aux]
type = ADMaterialRealAux
variable = pen_thick_aux
property = liquid_penetration
block = 'fuel ${cladding_block}'
[]
[assign_total_id_reduction]
type = ParsedAux
variable = total_id_reduction
coupled_variables = 'pen_thick_aux wastage_thickness'
expression = 'pen_thick_aux + wastage_thickness'
block = 'fuel ${cladding_block}'
[]
[]
[Materials]
[fuel_pen]
type = ADMetallicFuelLiquidCladdingPenetration
temperature = temp
mesh_generator = gen
fuel_elongation_pp = max_fuel_elongation
liquid_penetration_model = 'ANL_CONSERVATIVE'
fuel_pu = Pu_0
burnup = burnup
outputs = all
calculate_fuel_melting_thickness = true
block = 'fuel ${cladding_block}'
[]
[longHT9_failure]
type = HT9FailureClad
block = '${cladding_block}'
method = cdf_long
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[d_x]
type = ADConstantAnisotropicMobility
tensor = '1e3 0 0
0 1e6 0
0 0 0'
M_name = d_x
[]
[cap_thcond]
type = ADGenericConstantMaterial
prop_names = 'thermal_conductivity specific_heat density'
prop_values = '65 1200 830'
block = 'cap stand'
outputs = all
[]
[interconnected_porosity]
type = ADParsedMaterial
block = 'fuel'
property_name = interconnected_porosity
material_property_names = 'porosity interconnectivity'
expression = 'porosity * interconnectivity'
outputs = all
[]
[fission_rate]
type = ADUPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${fuel_radius}
X_Zr = ${initial_X_Zr}
X_Pu_function = ${X_Pu}
block = 'fuel'
outputs = all
[]
[fission_rate_elongate]
type = ADUPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors_extended
pellet_radius = ${fuel_radius}
X_Zr = ${initial_X_Zr}
X_Pu_function = ${X_Pu}
block = '${cladding_block}'
outputs = all
fission_rate_name = fission_rate
[]
[burnup]
type = ADUPuZrBurnup
initial_X_Zr = ${initial_X_Zr}
initial_X_Pu = ${X_Pu}
density = ${fuel_density}
block = 'fuel'
outputs = all
[]
[burnup_elongate]
type = ADUPuZrBurnup
initial_X_Pu = ${X_Pu}
initial_X_Zr = ${initial_X_Zr}
outputs = all
block = '${cladding_block}'
density = ${fuel_density}
burnup_name = burnup
[]
[fuel_elastic_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'hotpress fuel_upuzrcreep gas_swelling'
block = 'fuel'
outputs = all
[]
[hotpress]
type = ADUPuZrHotPressingStressUpdate
block = 'fuel'
outputs = all
surface_energy = 1.6
plenum_pressure = plenum_pressure
porosity_name = porosity
max_inelastic_increment = 1e-1
interconnectivity = interconnectivity
bubble_concentration = ${bubble_concentration}
temperature = temp
creep_model = MFH
fission_rate = fission_rate
atomic_volume = 2.15e-29
porosity_start = 0.01
porosity_end = 0
grain_boundary_D0 = 4e-29
grain_boundary_Q = 0
absolute_tolerance = 1e-9
[]
[porosity]
type = ADPorosityFromStrain
block = 'fuel'
initial_porosity = 1e-10
inelastic_strain = 'combined_inelastic_strain'
outputs = all
[]
[fuel_elasticity_tensor]
type = ADUPuZrElasticityTensor
X_Zr = ${initial_X_Zr}
X_Pu = ${X_Pu}
youngs_model = LANL
block = 'fuel'
temperature = temp
use_old_porosity = true
outputs = all
output_properties = 'youngs_modulus poissons_ratio'
[]
[fuel_upuzrcreep]
type = ADUPuZrCreepUpdate
block = 'fuel'
temperature = temp
porosity = porosity
use_old_porosity = true
max_inelastic_increment = 1e-1
outputs = all
automatic_differentiation_return_mapping = false
[]
[fuel_thermal_expansion]
type = ADUPuZrThermalExpansionEigenstrain
block = 'fuel'
temperature = temp
stress_free_temperature = 298.0
eigenstrain_name = fuel_thermal_strain
outputs = all
thermal_expansion_model = LANL
X_Zr = ${initial_X_Zr}
X_Pu = ${X_Pu}
[]
[gas_swelling]
type = ADSimpleFissionGasViscoplasticityStressUpdate
temperature = temp
outputs = all
block = 'fuel'
bubble_concentration = ${bubble_concentration}
initial_bubble_concentration = ${bubble_concentration}
compute_interconnectivity = true
fission_gas_yield = 0.3017
fission_rate = fission_rate
initial_atoms_per_bubble = 1e-05
initial_bubble_radius = 1e-15
initial_fgm_dissolved = 0
interconnection_cutoff = 0.99
interconnection_initiating_porosity = 0.23
interconnection_terminating_porosity = 0.25
max_inelastic_increment = 1e-2
retained_gas_fraction = 0.25
interconnection_dependent_retained_gas_fraction = 0.5
surface_energy = 1.6
anisotropic_factor = 0.26
initial_porosity = 1e-10
fuel_melting_function = fuel_melt_func
[]
[solid_swelling]
type = ADBurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = 'fuel'
swelling_name = 'solid_swelling'
outputs = all
anisotropic_factor = 0.26
[]
[metal_fuel_thermal]
type = ADUPuZrThermal
block = 'fuel'
X_Zr = ${initial_X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
porosity = porosity
temperature = temp
outputs = all
porosity_model = logged
sodium_logged_porosity = sodium_logged_porosity
[]
[sodium_logging]
type = ADUPuZrSodiumLogging
block = 'fuel'
porosity = porosity
interconnectivity = interconnectivity
sodium_infiltration_fraction = 0.28
outputs = all
[]
[fuel_density]
type = ADStrainAdjustedDensity
block = 'fuel'
strain_free_density = ${fuel_density}
outputs = all
[]
[fast_neutron_flux]
type = ADFastNeutronFlux
calculate_fluence = true
axial_power_profile = fflux_axial_peaking_factors
rod_ave_lin_pow = flux_history
block = fuel
factor = 1.0
outputs = all
[]
[fast_neutron_flux_elongate]
type = ADFastNeutronFlux
calculate_fluence = true
axial_power_profile = fflux_axial_peaking_factors_elongate
rod_ave_lin_pow = flux_history
block = '${cladding_block}'
factor = 1.0
outputs = all
[]
[cladding_elasticity_tensor]
type = ADHT9ElasticityTensor
temperature = temp
block = '${cladding_block}'
outputs = all
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
output_properties = 'youngs_modulus poissons_ratio'
[]
[cladding_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'cladding_creep'
block = '${cladding_block}'
outputs = all
[]
[cladding_creep]
type = ADHT9CreepUpdate
block = '${cladding_block}'
temperature = temp
outputs = all
primary_creep_model = MFH
secondary_creep_model = MFH
irradiation_creep_model = MFH
fast_neutron_flux = fast_neutron_flux
[]
[thermal_expansion]
type = ADHT9ThermalExpansionEigenstrain
block = '${cladding_block}'
temperature = temp
stress_free_temperature = 298.0
eigenstrain_name = cladding_thermal_eigenstrain
outputs = all
[]
[cladding_thermal]
type = ADHT9Thermal
block = '${cladding_block}'
temperature = temp
outputs = all
[]
[cladding_density]
type = ADStrainAdjustedDensity
block = '${cladding_block}'
strain_free_density = '${clad_density}'
outputs = all
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = burnup_ht9_opt
burnup = burnup
temperature = temp
scale_factor = 1
block = '${cladding_block}'
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = HT9
use_effective_method = true
temperature = temp
scale_factor = 1
block = '${cladding_block}'
outputs = all
[]
[]
[Dampers]
[disp_x]
type = MaxIncrement
variable = disp_x
max_increment = 1e-4
[]
[disp_y]
type = MaxIncrement
variable = disp_y
max_increment = 1e-3
[]
[temp]
type = MaxIncrement
variable = temp
max_increment = 50
[]
[]
[Preconditioning]
[vcp]
type = VCP
full = true
primary_variable = 'disp_x disp_y temp'
preconditioner = 'LU'
adaptive_condensation = true
lm_variable = 'fuel_cladding_mechanical_normal_lm fuel_cladding_mechanical_tangential_lm inside2outside_thermal_lm'
is_lm_coupling_diagonal = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew -snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount -snes_force_iteration'
petsc_options_value = 'lu superlu_dist 1e-5 NONZERO 1e-15 1'
line_search = 'none'
snesmf_reuse_base = false
verbose = true
l_max_its = 60
nl_max_its = 20
nl_rel_tol = 1e-7
nl_abs_tol = 1e-9
end_time = ${run_time}
dtmin = 1e-100
dtmax = ${max_time_step}
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
ignore_variables_for_autoscaling = 'fuel_cladding_mechanical_normal_lm fuel_cladding_mechanical_tangential_lm inside2outside_thermal_lm'
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = time_step_limit
force_step_every_function_point = true
timestep_limiting_function = power_history
dt = 1e2
iteration_window = 4
optimal_iterations = 10
[]
[]
[Postprocessors]
[_dt]
type = TimestepSize
[]
# elemental temperatures
[temp_fuel_avg]
type = ElementAverageValue
variable = temp
block = 'fuel'
execute_on = 'initial timestep_end'
[]
[temp_fuel_max]
type = ElementExtremeValue
variable = temp
block = 'fuel'
[]
[temp_fuel_min]
type = ElementExtremeValue
variable = temp
block = 'fuel'
value_type = min
[]
[temp_cladding_avg]
type = ElementAverageValue
variable = temp
block = '${cladding_block}'
[]
[temp_cladding_max]
type = ElementExtremeValue
variable = temp
block = '${cladding_block}'
[]
[temp_cladding_min]
type = ElementExtremeValue
variable = temp
block = '${cladding_block}'
value_type = min
[]
# boundary temperatures
[temp_gas_avg]
type = SideAverageValue
boundary = 'gas_height cladding_inside_top'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_sodium_avg]
type = ElementAverageValue
block = 'cap'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_inside_surfaces_avg]
type = SideAverageValue
boundary = 'inside_surfaces'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_fuel_centerline_avg]
type = AxisymmetricCenterlineAverageValue
boundary = 'centerline'
variable = temp
[]
[temp_fuel_centerline_max]
type = NodalExtremeValue
boundary = 'centerline'
variable = temp
[]
[temp_fuel_centerline_min]
type = NodalExtremeValue
boundary = 'centerline'
variable = temp
value_type = min
[]
[temp_fuel_surface_avg]
type = SideAverageValue
boundary = 'fuel_outer_radial_surface'
variable = temp
[]
[temp_fuel_surface_max]
type = NodalExtremeValue
boundary = 'fuel_outer_radial_surface'
variable = temp
[]
[temp_fuel_surface_min]
type = NodalExtremeValue
boundary = 'fuel_outer_radial_surface'
variable = temp
value_type = min
[]
[temp_cladding_inside_right_avg]
type = SideAverageValue
boundary = 'cladding_inside_right'
variable = temp
[]
[temp_cladding_inside_right_max]
type = NodalExtremeValue
boundary = 'cladding_inside_right'
variable = temp
[]
[temp_cladding_outside_right_avg]
type = SideAverageValue
boundary = 'cladding_outside_right'
variable = temp
[]
# stresses
[stress_vonmises_fuel_avg]
type = ElementAverageValue
variable = vonmises_stress
block = 'fuel'
[]
[stress_vonmises_fuel_max]
type = ElementExtremeValue
variable = vonmises_stress
block = 'fuel'
[]
[stress_vonmises_fuel_min]
type = ElementExtremeValue
variable = vonmises_stress
value_type = min
block = 'fuel'
[]
[stress_hydro_fuel_avg]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'fuel'
[]
[stress_hydro_fuel_max]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'fuel'
[]
[stress_hydro_fuel_min]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = 'fuel'
[]
[stress_vonmises_cladding_avg]
type = ElementAverageValue
variable = vonmises_stress
block = '${cladding_block}'
[]
[stress_vonmises_cladding_max]
type = ElementExtremeValue
variable = vonmises_stress
block = '${cladding_block}'
[]
[stress_vonmises_cladding_min]
type = ElementExtremeValue
variable = vonmises_stress
value_type = min
block = '${cladding_block}'
[]
[stress_hydro_cladding_avg]
type = ElementAverageValue
variable = hydrostatic_stress
block = '${cladding_block}'
[]
[stress_hydro_cladding_max]
type = ElementExtremeValue
variable = hydrostatic_stress
block = '${cladding_block}'
[]
[stress_hydro_cladding_min]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = '${cladding_block}'
[]
[contact_pressure_max]
type = NodalExtremeValue
variable = fuel_cladding_mechanical_normal_lm
boundary = 'fuel_outer_radial_surface'
[]
# strain information
[strain_solid_swelling_fuel_avg]
type = ElementAverageValue
variable = solid_swelling
block = 'fuel'
[]
[strain_gas_swelling_fuel_avg]
type = ElementAverageValue
variable = effective_fission_gas_strain
block = 'fuel'
[]
[strain_hot_pressing_fuel_avg]
type = ElementAverageValue
variable = effective_hot_pressing_strain
block = 'fuel'
[]
[strain_volumetric_fuel_avg]
type = ElementAverageValue
variable = firstinv_strain
block = 'fuel'
[]
[strain_axial_fuel_avg]
type = ParsedPostprocessor
pp_names = 'disp_y_fuel_top_surface_avg disp_y_fuel_bottom_surface_avg'
expression = '(disp_y_fuel_top_surface_avg - disp_y_fuel_bottom_surface_avg) / ${fuel_height}'
[]
[disp_y_fuel_top_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_top'
[]
[disp_y_fuel_top_surface_max]
type = NodalExtremeValue
variable = disp_y
boundary = 'fuel_top'
[]
[disp_y_fuel_bottom_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_bottom'
[]
[disp_y_fuel_bottom_surface_max]
type = NodalExtremeValue
variable = disp_y
boundary = 'fuel_bottom'
[]
[disp_x_fuel_radial_surface_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'fuel_outer_radial_surface'
[]
[disp_x_fuel_radial_surface_avg]
type = SideAverageValue
variable = disp_x
boundary = 'fuel_outer_radial_surface'
[]
[disp_x_cladding_interior_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_inside_right'
[]
[disp_x_cladding_interior_min]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_inside_right'
value_type = min
[]
[disp_x_cladding_interior_avg]
type = SideAverageValue
variable = disp_x
boundary = 'cladding_inside_right'
[]
[disp_x_cladding_exterior_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_outside_right'
[]
[disp_x_cladding_exterior_avg]
type = SideAverageValue
variable = disp_x
boundary = 'cladding_outside_right'
[]
[anisotropic_swelling_factor]
type = FunctionValuePostprocessor
function = anisotropic_swelling_factor
[]
[max_fuel_elongation]
type = NodalExtremeValue
variable = disp_y
boundary = fuel_outside_all
[]
# geometric information
[volume_cladding_interior]
type = InternalVolume
boundary = 'cladding_inside_all'
[]
[volume_fuel]
type = InternalVolume
boundary = 'fuel_outside_all'
execute_on = 'initial timestep_end'
[]
[volume_plenum]
type = InternalVolume
boundary = 'inside_surfaces'
execute_on = 'initial timestep_end'
addition = sodium_volume
[]
[plenum_ratio]
type = ParsedPostprocessor
pp_names = 'volume_plenum volume_fuel'
expression = 'volume_plenum / volume_fuel'
execute_on = 'initial timestep_end'
[]
[volume_sodium]
type = FunctionValuePostprocessor
function = sodium_volume
execute_on = 'initial timestep_end'
[]
# energy information
[flux_clad]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = 'cladding_inside_right'
diffusivity = thermal_conductivity
[]
[flux_fuel]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = 'fuel_contact_surfaces'
diffusivity = thermal_conductivity
[]
[power_integral]
type = ADElementIntegralPower
variable = temp
use_material_fission_rate = true
fission_rate_material = fission_rate
block = fuel
[]
[linear_heat_generation_rate]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[burnup_avg]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[burnup_max]
type = ElementExtremeValue
block = fuel
variable = burnup
[]
[fission_rate_avg]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
# fission gas information
[fg_produced]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_produced
block = fuel
[]
[fg_released]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_released
block = fuel
execute_on = 'initial timestep_end'
[]
[fg_percent]
type = FGRPercent
fission_gas_released = fg_released
fission_gas_generated = fg_produced
[]
[interconnected_porosity_fuel_avg]
type = ElementAverageValue
variable = interconnected_porosity
block = fuel
execute_on = 'initial timestep_end'
[]
[porosity_fuel_avg]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[porosity_fuel_max]
type = ElementExtremeValue
variable = porosity
block = fuel
[]
[porosity_fuel_min]
type = ElementExtremeValue
variable = porosity
value_type = min
block = fuel
[]
[porosity_sodium_logging_avg]
type = ElementAverageValue
variable = sodium_logged_porosity
block = fuel
[]
# extras
[actual_time_step_limit]
type = MaterialTimeStepPostprocessor
block = 'fuel ${cladding_block}'
outputs = none
[]
[time_step_limit]
type = ParsedPostprocessor
expression = 'if(actual_time_step_limit > 1e6, 1e6, actual_time_step_limit)'
pp_names = 'actual_time_step_limit'
[]
[max_wastagethickness]
type = ElementExtremeValue
value_type = max
variable = wastage_thickness
# outputs = 'console'
[]
[max_wst_temp]
type = ElementExtremeValue
value_type = max
variable = temp
proxy_variable = wastage_thickness
block = '${cladding_block}'
[]
[max_wst_burnup]
type = ElementExtremeValue
value_type = max
variable = burnup
proxy_variable = wastage_thickness
block = '${cladding_block}'
[]
[max_cdf]
type = ElementExtremeValue
value_type = max
variable = cumulative_damage_index
[]
[]
[VectorPostprocessors]
[id_wastage]
type = FuelRodLineValueSampler
variable = wastage_thickness
material = 'clad'
fraction = 0.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = csv_wst_a
[]
[id_pen_total]
type = FuelRodLineValueSampler
variable = total_id_reduction
material = 'clad'
fraction = 0.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[od_wastage]
type = FuelRodLineValueSampler
variable = cc_wastage_thickness
material = 'clad'
fraction = 1.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[fuel_melting]
type = FuelRodLineValueSampler
variable = fuel_melting_thickness
material = 'fuel'
fraction = 1.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[]
[PerformanceMetricOutputs]
outputs = 'console'
[]
[Outputs]
print_linear_residuals = true
color = true
perf_graph = true
sync_times = ${time_spots}
[checkpoint]
type = Checkpoint
time_step_interval = 1
[]
[exodus]
type = Exodus
time_step_interval = 500
sync_times = ${time_spots}
enable = false
[]
[console]
type = Console
show = 'time_step_size temp_fuel_avg temp_fuel_centerline_max temp_cladding_avg temp_cladding_max stress_vonmises_fuel_max stress_hydro_fuel_max stress_hydro_fuel_min contact_pressure_max strain_axial_fuel_avg power_integral burnup_avg fission_rate_avg fg_percent porosity_fuel_avg time_step_limit anisotropic_swelling_factor plenum_ratio volume_fuel volume_plenum max_wastagethickness max_cdf'
[]
[csv_wst_a]
type = CSV
sync_only = true
sync_times = ${time_spots_a}
enable = ${enable_a}
execute_postprocessors_on = none
create_latest_symlink = true
[]
[csv_general]
type = CSV
sync_only = true
sync_times = ${time_spots}
enable = true
[]
[]
[Debug]
show_var_residual = 'disp_x disp_y temp'
show_var_residual_norms = true
[]
(assessment/metallic_fuel/WPF/analysis/FM-1/FM_base.i)
# FM-1 Base Input File
gap_bottom_length = 0.31e-3
top_bot_cladding_height = 2.24e-3
# calculations
cladding_ir = '${fparse fuel_radius + cladding_gap_width}'
gas_plenum_height = '${fparse plenum_volume / pi / cladding_ir^2}'
fuel_y_start = '${fparse gap_bottom_length + top_bot_cladding_height}'
alpha_start = 877
alpha_end = 936
bubble_concentration = 1e15
cladding_block = 'cladding cladding_tri'
y_tc1 = '${fparse 2.55e-3+22.0*0.0254}'
y_tc2 = '${fparse y_tc1-4.5*0.0254}'
y_tc3 = '${fparse y_tc2-3.5*0.0254}'
y_tc4 = '${fparse y_tc3-2.0*0.0254}'
y_tc5 = '${fparse y_tc4-3.0*0.0254}'
y_tc6 = '${fparse y_tc1-4.0*0.0254}'
x_tc = 0.002920
p_tc1 = '${x_tc} ${y_tc1} 0.0'
p_tc2 = '${x_tc} ${y_tc2} 0.0'
p_tc3 = '${x_tc} ${y_tc3} 0.0'
p_tc4 = '${x_tc} ${y_tc4} 0.0'
p_tc5 = '${x_tc} ${y_tc5} 0.0'
p_tc6 = '${x_tc} ${y_tc6} 0.0'
# A relatively coarse radial mesh density can be used
# since localized refining is done by TRI3 elements
clad_n_rad = 10
[GlobalParams]
order = FIRST
energy_per_fission = 3.2e-11 # J/fission
displacements = 'disp_x disp_y'
alpha_transition_end = ${alpha_end}
alpha_transition_start = ${alpha_start}
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
group_variables = 'disp_x disp_y'
converge_on = 'disp_x disp_y temp'
[]
[Mesh]
# Pin design parameters from FIPD database
[gen]
type = FIPDRodletMeshGenerator
fipd_geom_file = ${raw '../../../../../fipd-bison-integration-data/ ${exp_id} / ${pin_id} / ${pin_id} _design.csv'}
gap_bottom_length = 0.31e-3 # arbitrary
cladding_bottom_plug_length = 2.24e-3 # arbitrary
cladding_top_plug_length = 2.24e-3 # arbitrary
cladding_sidewall_radial_elements = ${clad_n_rad}
cladding_sidewall_axial_element_intervals = '0 0.540 0.625 1.0'
cladding_sidewall_axial_element_numbers = '150 1000 150'
use_tri_for_cladding_sidewall = '0 1 0'
cladding_top_plug_radial_elements = 10
cladding_top_plug_axial_elements = 5
cladding_bottom_plug_axial_elements = 5
fuel_radial_elements = 10
fuel_axial_element_intervals = '0 1'
fuel_axial_element_numbers = '1000'
tri_element_size_factor = 0.4
elem_type = QUAD4
make_stand = true
make_cap = true
cap_axial_elements = 15
stand_axial_elements = 15
[]
[sodium_height]
type = SideSetsFromBoundingBoxGenerator
input = gen
bottom_left = '0 0 0'
top_right = '${fparse cladding_ir + cladding_thickness} ${fparse fuel_y_start + fuel_height} 0'
included_boundaries = 'cladding_inside_right'
boundary_new = '1005'
[]
[gas_height]
type = SideSetsFromBoundingBoxGenerator
input = sodium_height
bottom_left = '0 ${fparse fuel_y_start + fuel_height} 0'
top_right = '${fparse cladding_ir + cladding_thickness} ${fparse fuel_y_start + fuel_height + gas_plenum_height + top_bot_cladding_height} 0'
included_boundaries = 'cladding_inside_right'
boundary_new = '1006'
[]
[sodium_plenum_rename]
type = RenameBoundaryGenerator
input = gas_height
old_boundary = '1005 1006'
new_boundary = 'sodium_height gas_height'
[]
patch_size = 40
patch_update_strategy = always
partitioner = centroid
centroid_partitioner_direction = y
coord_type = RZ
[]
[Variables]
[temp]
initial_condition = 298
block = 'fuel ${cladding_block} cap stand'
[]
[disp_x]
block = 'fuel ${cladding_block} cap stand'
[]
[disp_y]
block = 'fuel ${cladding_block} cap stand'
[]
[]
[Functions]
[fflux_axial_peaking_factors]
type = ConstantFunction
value = 0.0
[]
[fflux_axial_peaking_factors_elongate]
type = ConstantFunction
value = 0.0
[]
[flux_history] # Time-dependent pin average fast flux from FIPD database
type = ConstantFunction
value = 0.0
[]
[clad_od_temp]
type = PiecewiseBilinear
data_file = './data/temp_hist.csv'
xaxis = 1
[]
[ab_sodium_vol]
type = MeshPropertyFunction
mesh_generator = gen
mesh_property_name = sodium_volume
scale_factor = -1.0
[]
[sodium_volume]
# Need to account for the factor that hot pressing is also occupying the open pores
type = ParsedFunction
symbol_names = 'porosity_sodium_logging_avg volume_fuel raw_sodium_vol temp_sodium_avg'
symbol_values = 'porosity_sodium_logging_avg volume_fuel ab_sodium_vol temp_sodium_avg'
# Note the the symbol before volume_fuel should be negative as volume_fuel itself is negative
expression = 'raw_sodium_vol * 954 / (1012 - 0.23 * temp_sodium_avg) - volume_fuel * porosity_sodium_logging_avg'
[]
[power_history]
type = ConstantFunction
value = 0.0
[]
[axial_peaking_factors]
type = ConstantFunction
value = 0.0
[]
[axial_peaking_factors_extended]
type = ConstantFunction
value = 0.0
[]
[anisotropic_swelling_factor]
type = ParsedFunction
symbol_names = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg fuel_height fuel_radius'
symbol_values = 'disp_x_fuel_radial_surface_avg disp_y_fuel_top_surface_avg ${fuel_height} ${fuel_radius}'
expression = '(disp_x_fuel_radial_surface_avg / ${fuel_radius}) / (disp_y_fuel_top_surface_avg / ${fuel_height})'
[]
[gap_thermal_conductivity]
type = ParsedFunction
expression = '124.67 - 0.11381 * t + 5.5226e-5 * t^2 - 1.1842e-8 * t^3'
[]
[id_vpp_func] # vpp_function used to track FCCI-related cladding degradation.
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = id_pen_total
argument_column = y
wastage_type = ID
value_column = total_id_reduction
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[od_vpp_func] # vpp_function used to track CCCI-related cladding degradation.
type = MetallicFuelWastageDegradationFunction
vectorpostprocessor_name = od_wastage
argument_column = y
wastage_type = OD
value_column = cc_wastage_thickness
use_metadata = true
degradation_factor = 0.001
mesh_generator = 'gen'
transition_width = 1E-4
[]
[fuel_melt_func]
type = MetallicFuelMeltingFunction
vectorpostprocessor_name = fuel_melting
argument_column = y
value_column = fuel_melting_thickness
use_metadata = true
mesh_generator = 'gen'
transition_width = 2e-4
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[fuel]
block = fuel
strain = FINITE
generate_output = 'firstinv_strain stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
eigenstrain_names = 'fuel_thermal_strain solid_swelling_eigenstrain'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[cladding]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = '${cladding_block}'
eigenstrain_names = 'cladding_thermal_eigenstrain'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[]
[Kernels]
[gravity]
type = ADGravity
block = 'fuel ${cladding_block}'
variable = disp_y
value = -9.81
extra_vector_tags = 'ref'
[]
[heat]
type = ADHeatConduction
block = 'fuel ${cladding_block} cap stand'
variable = temp
extra_vector_tags = 'ref'
[]
[heat_ie]
type = ADHeatConductionTimeDerivative
block = 'fuel ${cladding_block} cap stand'
variable = temp
extra_vector_tags = 'ref'
[]
[heat_source]
type = ADFissionRateHeatSource
variable = temp
block = 'fuel'
fission_rate = fission_rate
extra_vector_tags = 'ref'
energy_deposited_in_fuel = 0.95
[]
[disp_x_dt]
type = ADTimeDerivative
variable = disp_x
block = ' cap stand'
extra_vector_tags = 'ref'
[]
[disp_y_dt]
type = ADTimeDerivative
variable = disp_y
block = 'cap stand'
extra_vector_tags = 'ref'
[]
[disp_x_diff]
type = ADMatAnisoDiffusion
variable = disp_x
block = 'cap stand'
diffusivity = d_x
extra_vector_tags = 'ref'
[]
[disp_y_diff]
type = ADMatDiffusion
variable = disp_y
block = 'cap stand'
diffusivity = 1e8
extra_vector_tags = 'ref'
[]
[]
[UserObjects]
[pin_geometry]
type = FuelPinGeometry
clad_bottom = cladding_outside_bottom
clad_inner_wall = cladding_inside_right
clad_outer_wall = cladding_outside_right
clad_top = cladding_outside_top
pellet_exteriors = fuel_outside_all
[]
[fuel_thm_exp]
type = LayeredAverage
variable = fuel_thermal_strain_xx
direction = y
num_layers = 1000
block = fuel
[]
[clad_thm_exp]
type = LayeredAverage
variable = clad_thermal_eigenstrain_xx
direction = y
num_layers = 1000
block = ${cladding_block}
[]
[]
[Contact]
[fuel_cladding_mechanical]
primary = cladding_inside_right
secondary = fuel_outer_radial_surface
model = coulomb
friction_coefficient = 0.1
formulation = mortar
c_normal = '${fparse 1e17 * magic_factor}'
c_tangential = '${fparse 1e19 * magic_factor}'
correct_edge_dropping = true
[]
[]
[MortarGapHeatTransfer]
[inside2outside]
temperature = temp
boundary = 'cladding_inside_right'
gap_conductivity_function = gap_thermal_conductivity
gap_conductivity_function_variable = temp
primary_boundary = cladding_inside_right
secondary_boundary = fuel_contact_surfaces
gap_flux_options = 'CONDUCTION'
ghost_point_neighbors = true
[]
[]
[BCs]
[no_x_all]
type = ADDirichletBC
variable = disp_x
boundary = 'centerline cap_top'
value = 0.0
preset = false
[]
[no_y_clad]
type = ADDirichletBC
variable = disp_y
boundary = 'cladding_inside_bottom'
value = 0.0
preset = false
[]
[Pressure]
[coolantPressure]
boundary = 'cladding_outside_right'
factor = 1378.95 # in Pa, 0.2 psia as measured by transducer
use_automatic_differentiation = true
[]
[]
[PlenumPressure]
[plenumPressure]
boundary = 'inside_surfaces'
initial_pressure = 84116 # in Pa, 12.2 psi
startup_time = 0
R = 8.3143
temperature = temp_gas_avg
volume = volume_plenum
output = plenum_pressure
material_input = fg_released
use_automatic_differentiation = true
[]
[]
[surf] # Setting temperature BC base on FIPD data
type = ADFunctionDirichletBC
variable = temp
boundary = 'cladding_outside_bottom cladding_outside_right cladding_outside_top'
function = clad_od_temp
[]
[]
[AuxVariables]
[dummy_hoop_stress]
order = CONSTANT
family = MONOMIAL
[]
[cumulative_damage_index]
order = CONSTANT
family = MONOMIAL
[]
[relx]
[]
[clad_thm_exp]
order = CONSTANT
family = MONOMIAL
block = '${cladding_block}'
[]
[clad_thermal_eigenstrain_xx]
order = CONSTANT
family = MONOMIAL
block = '${cladding_block}'
[]
[fuel_thermal_strain_xx]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[fuel_thermal_strain_yy]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[fuel_thm_exp]
order = CONSTANT
family = MONOMIAL
block = fuel
[]
[func_val1]
[]
[func_val2]
[]
[func_val3]
[]
# OPTD Active during this stage
[pen_thick_aux]
family = MONOMIAL
order = CONSTANT
block = 'fuel ${cladding_block}'
[]
[total_id_reduction]
family = MONOMIAL
order = CONSTANT
block = 'fuel ${cladding_block}'
[]
[fast_neutron_fluence_aux]
order = CONSTANT
family = MONOMIAL
block = '${cladding_block}'
[]
[]
[AuxKernels]
[func_val1]
type = FunctionAux
function = id_vpp_func
variable = func_val1
block = 'cladding cladding_tri'
[]
[func_val2]
type = FunctionAux
function = od_vpp_func
variable = func_val2
block = 'cladding cladding_tri'
[]
[func_val3]
type = FunctionAux
function = fuel_melt_func
variable = func_val3
block = fuel
[]
[cdf_amount]
block = '${cladding_block}'
type = MaterialRealAux
property = cdf_failure
variable = cumulative_damage_index
[]
[relx_aux]
type = ParsedAux
variable = relx
block = fuel
use_xyzt = true
expression = 'x / ${fuel_radius}'
[]
[clad_thm_exp]
type = SpatialUserObjectAux
variable = clad_thm_exp
execute_on = 'initial timestep_end'
user_object = clad_thm_exp
block = '${cladding_block}'
[]
[clad_thermal_eigenstrain_xx]
type = ADRankTwoAux
rank_two_tensor = cladding_thermal_eigenstrain
variable = clad_thermal_eigenstrain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = '${cladding_block}'
[]
[fuel_thermal_strain_xx]
type = ADRankTwoAux
rank_two_tensor = fuel_thermal_strain
variable = fuel_thermal_strain_xx
index_j = 0
index_i = 0
execute_on = 'initial timestep_end'
block = fuel
[]
[fuel_thermal_strain_yy]
type = ADRankTwoAux
rank_two_tensor = fuel_thermal_strain
variable = fuel_thermal_strain_yy
index_j = 1
index_i = 1
execute_on = 'initial timestep_end'
block = fuel
[]
[fuel_thm_exp]
type = SpatialUserObjectAux
variable = fuel_thm_exp
execute_on = 'initial timestep_end'
user_object = fuel_thm_exp
block = fuel
[]
#OPTD
[assign_pen_thick_aux]
type = ADMaterialRealAux
variable = pen_thick_aux
property = liquid_penetration
block = 'fuel ${cladding_block}'
[]
[assign_total_id_reduction]
type = ParsedAux
variable = total_id_reduction
coupled_variables = 'pen_thick_aux wastage_thickness'
expression = 'pen_thick_aux + wastage_thickness'
block = 'fuel ${cladding_block}'
[]
[]
[Materials]
[fuel_pen]
type = ADMetallicFuelLiquidCladdingPenetration
temperature = temp
mesh_generator = gen
fuel_elongation_pp = max_fuel_elongation
liquid_penetration_model = 'ANL_CONSERVATIVE'
fuel_pu = Pu_0
burnup = burnup
outputs = all
calculate_fuel_melting_thickness = true
block = 'fuel ${cladding_block}'
[]
[longHT9_failure]
type = HT9FailureClad
block = '${cladding_block}'
method = cdf_long
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[d_x]
type = ADConstantAnisotropicMobility
tensor = '1e3 0 0
0 1e6 0
0 0 0'
M_name = d_x
[]
[cap_thcond]
type = ADGenericConstantMaterial
prop_names = 'thermal_conductivity specific_heat density'
prop_values = '65 1200 830'
block = 'cap stand'
outputs = all
[]
[interconnected_porosity]
type = ADParsedMaterial
block = 'fuel'
property_name = interconnected_porosity
material_property_names = 'porosity interconnectivity'
expression = 'porosity * interconnectivity'
outputs = all
[]
[fission_rate]
type = ADUPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors
pellet_radius = ${fuel_radius}
X_Zr = ${initial_X_Zr}
X_Pu_function = ${X_Pu}
block = 'fuel'
outputs = all
[]
[fission_rate_elongate]
type = ADUPuZrFissionRate
rod_linear_power = power_history
axial_power_profile = axial_peaking_factors_extended
pellet_radius = ${fuel_radius}
X_Zr = ${initial_X_Zr}
X_Pu_function = ${X_Pu}
block = '${cladding_block}'
outputs = all
fission_rate_name = fission_rate
[]
[burnup]
type = ADUPuZrBurnup
initial_X_Zr = ${initial_X_Zr}
initial_X_Pu = ${X_Pu}
density = ${fuel_density}
block = 'fuel'
outputs = all
[]
[burnup_elongate]
type = ADUPuZrBurnup
initial_X_Pu = ${X_Pu}
initial_X_Zr = ${initial_X_Zr}
outputs = all
block = '${cladding_block}'
density = ${fuel_density}
burnup_name = burnup
[]
[fuel_elastic_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'hotpress fuel_upuzrcreep gas_swelling'
block = 'fuel'
outputs = all
[]
[hotpress]
type = ADUPuZrHotPressingStressUpdate
block = 'fuel'
outputs = all
surface_energy = 1.6
plenum_pressure = plenum_pressure
porosity_name = porosity
max_inelastic_increment = 1e-1
interconnectivity = interconnectivity
bubble_concentration = ${bubble_concentration}
temperature = temp
creep_model = MFH
fission_rate = fission_rate
atomic_volume = 2.15e-29
porosity_start = 0.01
porosity_end = 0
grain_boundary_D0 = 4e-29
grain_boundary_Q = 0
absolute_tolerance = 1e-9
[]
[porosity]
type = ADPorosityFromStrain
block = 'fuel'
initial_porosity = 1e-10
inelastic_strain = 'combined_inelastic_strain'
outputs = all
[]
[fuel_elasticity_tensor]
type = ADUPuZrElasticityTensor
X_Zr = ${initial_X_Zr}
X_Pu = ${X_Pu}
youngs_model = LANL
block = 'fuel'
temperature = temp
use_old_porosity = true
outputs = all
output_properties = 'youngs_modulus poissons_ratio'
[]
[fuel_upuzrcreep]
type = ADUPuZrCreepUpdate
block = 'fuel'
temperature = temp
porosity = porosity
use_old_porosity = true
max_inelastic_increment = 1e-1
outputs = all
automatic_differentiation_return_mapping = false
[]
[fuel_thermal_expansion]
type = ADUPuZrThermalExpansionEigenstrain
block = 'fuel'
temperature = temp
stress_free_temperature = 298.0
eigenstrain_name = fuel_thermal_strain
outputs = all
thermal_expansion_model = LANL
X_Zr = ${initial_X_Zr}
X_Pu = ${X_Pu}
[]
[gas_swelling]
type = ADSimpleFissionGasViscoplasticityStressUpdate
temperature = temp
outputs = all
block = 'fuel'
bubble_concentration = ${bubble_concentration}
initial_bubble_concentration = ${bubble_concentration}
compute_interconnectivity = true
fission_gas_yield = 0.3017
fission_rate = fission_rate
initial_atoms_per_bubble = 1e-05
initial_bubble_radius = 1e-15
initial_fgm_dissolved = 0
interconnection_cutoff = 0.99
interconnection_initiating_porosity = 0.23
interconnection_terminating_porosity = 0.25
max_inelastic_increment = 1e-2
retained_gas_fraction = 0.25
interconnection_dependent_retained_gas_fraction = 0.5
surface_energy = 1.6
anisotropic_factor = 0.26
initial_porosity = 1e-10
fuel_melting_function = fuel_melt_func
[]
[solid_swelling]
type = ADBurnupDependentEigenstrain
eigenstrain_name = solid_swelling_eigenstrain
block = 'fuel'
swelling_name = 'solid_swelling'
outputs = all
anisotropic_factor = 0.26
[]
[metal_fuel_thermal]
type = ADUPuZrThermal
block = 'fuel'
X_Zr = ${initial_X_Zr}
X_Pu = ${X_Pu}
spheat_model = savage
porosity = porosity
temperature = temp
outputs = all
porosity_model = logged
sodium_logged_porosity = sodium_logged_porosity
[]
[sodium_logging]
type = ADUPuZrSodiumLogging
block = 'fuel'
porosity = porosity
interconnectivity = interconnectivity
sodium_infiltration_fraction = 0.28
outputs = all
[]
[fuel_density]
type = ADStrainAdjustedDensity
block = 'fuel'
strain_free_density = ${fuel_density}
outputs = all
[]
[fast_neutron_flux]
type = ADFastNeutronFlux
calculate_fluence = true
axial_power_profile = fflux_axial_peaking_factors
rod_ave_lin_pow = flux_history
block = fuel
factor = 1.0
outputs = all
[]
[fast_neutron_flux_elongate]
type = ADFastNeutronFlux
calculate_fluence = true
axial_power_profile = fflux_axial_peaking_factors_elongate
rod_ave_lin_pow = flux_history
block = '${cladding_block}'
factor = 1.0
outputs = all
[]
[cladding_elasticity_tensor]
type = ADHT9ElasticityTensor
temperature = temp
block = '${cladding_block}'
outputs = all
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
output_properties = 'youngs_modulus poissons_ratio'
[]
[cladding_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'cladding_creep'
block = '${cladding_block}'
outputs = all
[]
[cladding_creep]
type = ADHT9CreepUpdate
block = '${cladding_block}'
temperature = temp
outputs = all
primary_creep_model = MFH
secondary_creep_model = MFH
irradiation_creep_model = MFH
fast_neutron_flux = fast_neutron_flux
[]
[thermal_expansion]
type = ADHT9ThermalExpansionEigenstrain
block = '${cladding_block}'
temperature = temp
stress_free_temperature = 298.0
eigenstrain_name = cladding_thermal_eigenstrain
outputs = all
[]
[cladding_thermal]
type = ADHT9Thermal
block = '${cladding_block}'
temperature = temp
outputs = all
[]
[cladding_density]
type = ADStrainAdjustedDensity
block = '${cladding_block}'
strain_free_density = '${clad_density}'
outputs = all
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = burnup_ht9_opt
burnup = burnup
temperature = temp
scale_factor = 1
block = '${cladding_block}'
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = HT9
use_effective_method = true
temperature = temp
scale_factor = 1
block = '${cladding_block}'
outputs = all
[]
[]
[Dampers]
[disp_x]
type = MaxIncrement
variable = disp_x
max_increment = 1e-3
[]
[disp_y]
type = MaxIncrement
variable = disp_y
max_increment = 1e-3
[]
[temp]
type = MaxIncrement
variable = temp
max_increment = 100
[]
[]
[Preconditioning]
[vcp]
type = VCP
full = true
primary_variable = 'disp_x disp_y temp'
preconditioner = 'LU'
adaptive_condensation = true
lm_variable = 'fuel_cladding_mechanical_normal_lm fuel_cladding_mechanical_tangential_lm inside2outside_thermal_lm'
is_lm_coupling_diagonal = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew -snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount -snes_force_iteration'
petsc_options_value = 'lu superlu_dist 1e-5 NONZERO 1e-15 1'
line_search = 'none'
snesmf_reuse_base = false
verbose = true
l_max_its = 60
nl_max_its = 100
nl_rel_tol = 5e-6
nl_abs_tol = 5e-9
end_time = '${fparse run_time + total_transient_time}'
dtmin = 1e-5
dtmax = 5.0
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
ignore_variables_for_autoscaling = 'fuel_cladding_mechanical_normal_lm fuel_cladding_mechanical_tangential_lm inside2outside_thermal_lm'
[TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_postprocessor = actual_cladding_time_step_limit
dt = 0.01
iteration_window = 4
optimal_iterations = 10
cutback_factor_at_failure = 0.9
growth_factor = 2
[]
[]
[Postprocessors]
[_dt]
type = TimestepSize
[]
[_transient_t]
type = ParsedPostprocessor
pp_names = ''
expression = 't-t0'
use_t = true
constant_names = 't0'
constant_expressions = '${run_time}'
[]
# elemental temperatures
[temp_fuel_avg]
type = ElementAverageValue
variable = temp
block = 'fuel'
execute_on = 'initial timestep_end'
[]
[temp_fuel_max]
type = ElementExtremeValue
variable = temp
block = 'fuel'
[]
[temp_fuel_min]
type = ElementExtremeValue
variable = temp
block = 'fuel'
value_type = min
[]
[temp_cladding_avg]
type = ElementAverageValue
variable = temp
block = '${cladding_block}'
[]
[temp_cladding_max]
type = ElementExtremeValue
variable = temp
block = '${cladding_block}'
[]
[temp_cladding_min]
type = ElementExtremeValue
variable = temp
block = '${cladding_block}'
value_type = min
[]
# boundary temperatures
[temp_gas_avg]
type = SideAverageValue
boundary = 'gas_height cladding_inside_top'
variable = temp
execute_on = 'initial timestep_end'
[]
# Beyond gap closure, sodium temperarture is almost the same as the cap.
[temp_sodium_avg]
type = ElementAverageValue
block = 'cap'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_inside_surfaces_avg]
type = SideAverageValue
boundary = 'inside_surfaces'
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_fuel_centerline_avg]
type = AxisymmetricCenterlineAverageValue
boundary = 'centerline'
variable = temp
[]
[temp_fuel_centerline_max]
type = NodalExtremeValue
boundary = 'centerline'
variable = temp
[]
[temp_fuel_centerline_min]
type = NodalExtremeValue
boundary = 'centerline'
variable = temp
value_type = min
[]
[temp_fuel_surface_avg]
type = SideAverageValue
boundary = 'fuel_outer_radial_surface'
variable = temp
[]
[temp_fuel_surface_max]
type = NodalExtremeValue
boundary = 'fuel_outer_radial_surface'
variable = temp
[]
[temp_fuel_surface_min]
type = NodalExtremeValue
boundary = 'fuel_outer_radial_surface'
variable = temp
value_type = min
[]
[temp_cladding_inside_right_avg]
type = SideAverageValue
boundary = 'cladding_inside_right'
variable = temp
[]
[temp_cladding_inside_right_max]
type = NodalExtremeValue
boundary = 'cladding_inside_right'
variable = temp
[]
[temp_cladding_outside_right_avg]
type = SideAverageValue
boundary = 'cladding_outside_right'
variable = temp
[]
# stresses
[stress_vonmises_fuel_avg]
type = ElementAverageValue
variable = vonmises_stress
block = 'fuel'
[]
[stress_vonmises_fuel_max]
type = ElementExtremeValue
variable = vonmises_stress
block = 'fuel'
[]
[stress_vonmises_fuel_min]
type = ElementExtremeValue
variable = vonmises_stress
value_type = min
block = 'fuel'
[]
[stress_hydro_fuel_avg]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'fuel'
[]
[stress_hydro_fuel_max]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'fuel'
[]
[stress_hydro_fuel_min]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = 'fuel'
[]
[stress_vonmises_cladding_avg]
type = ElementAverageValue
variable = vonmises_stress
block = '${cladding_block}'
[]
[stress_vonmises_cladding_max]
type = ElementExtremeValue
variable = vonmises_stress
block = '${cladding_block}'
[]
[stress_vonmises_cladding_min]
type = ElementExtremeValue
variable = vonmises_stress
value_type = min
block = '${cladding_block}'
[]
[stress_hydro_cladding_avg]
type = ElementAverageValue
variable = hydrostatic_stress
block = '${cladding_block}'
[]
[stress_hydro_cladding_max]
type = ElementExtremeValue
variable = hydrostatic_stress
block = '${cladding_block}'
[]
[stress_hydro_cladding_min]
type = ElementExtremeValue
variable = hydrostatic_stress
value_type = min
block = '${cladding_block}'
[]
[contact_pressure_max]
type = NodalExtremeValue
variable = fuel_cladding_mechanical_normal_lm
boundary = 'fuel_outer_radial_surface'
[]
# strain information
[strain_solid_swelling_fuel_avg]
type = ElementAverageValue
variable = solid_swelling
block = 'fuel'
[]
[strain_gas_swelling_fuel_avg]
type = ElementAverageValue
variable = effective_fission_gas_strain
block = 'fuel'
[]
[strain_hot_pressing_fuel_avg]
type = ElementAverageValue
variable = effective_hot_pressing_strain
block = 'fuel'
[]
[strain_volumetric_fuel_avg]
type = ElementAverageValue
variable = firstinv_strain
block = 'fuel'
[]
[strain_axial_fuel_avg]
type = ParsedPostprocessor
pp_names = 'disp_y_fuel_top_surface_avg disp_y_fuel_bottom_surface_avg'
expression = '(disp_y_fuel_top_surface_avg - disp_y_fuel_bottom_surface_avg) / ${fuel_height}'
[]
[disp_y_fuel_top_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_top'
[]
[disp_y_fuel_top_surface_max]
type = NodalExtremeValue
variable = disp_y
boundary = 'fuel_top'
[]
[disp_y_fuel_bottom_surface_avg]
type = SideAverageValue
variable = disp_y
boundary = 'fuel_bottom'
[]
[disp_y_fuel_bottom_surface_max]
type = NodalExtremeValue
variable = disp_y
boundary = 'fuel_bottom'
[]
[disp_x_fuel_radial_surface_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'fuel_outer_radial_surface'
[]
[disp_x_fuel_radial_surface_avg]
type = SideAverageValue
variable = disp_x
boundary = 'fuel_outer_radial_surface'
[]
[disp_x_cladding_interior_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_inside_right'
[]
[disp_x_cladding_interior_min]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_inside_right'
value_type = min
[]
[disp_x_cladding_interior_avg]
type = SideAverageValue
variable = disp_x
boundary = 'cladding_inside_right'
[]
[disp_x_cladding_exterior_max]
type = NodalExtremeValue
variable = disp_x
boundary = 'cladding_outside_right'
[]
[disp_x_cladding_exterior_avg]
type = SideAverageValue
variable = disp_x
boundary = 'cladding_outside_right'
[]
[anisotropic_swelling_factor]
type = FunctionValuePostprocessor
function = anisotropic_swelling_factor
[]
[max_fuel_elongation]
type = NodalExtremeValue
variable = disp_y
boundary = fuel_outside_all
[]
# geometric information
[volume_cladding_interior]
type = InternalVolume
boundary = 'cladding_inside_all'
[]
[volume_fuel]
type = InternalVolume
boundary = 'fuel_outside_all'
execute_on = 'initial timestep_end'
[]
[volume_plenum]
type = InternalVolume
boundary = 'inside_surfaces'
execute_on = 'initial timestep_end'
addition = sodium_volume
[]
[plenum_ratio]
type = ParsedPostprocessor
pp_names = 'volume_plenum volume_fuel'
expression = 'volume_plenum / volume_fuel'
execute_on = 'initial timestep_end'
[]
[volume_sodium]
type = FunctionValuePostprocessor
function = sodium_volume
execute_on = 'initial timestep_end'
[]
# energy information
[flux_clad]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = 'cladding_inside_right'
diffusivity = thermal_conductivity
[]
[flux_fuel]
type = ADSideDiffusiveFluxIntegral
variable = temp
boundary = 'fuel_contact_surfaces'
diffusivity = thermal_conductivity
[]
[power_integral]
type = ADElementIntegralPower
variable = temp
use_material_fission_rate = true
fission_rate_material = fission_rate
block = fuel
[]
[linear_heat_generation_rate]
type = FunctionValuePostprocessor
function = power_history
scale_factor = 0.01
[]
[burnup_avg]
type = ElementAverageValue
block = fuel
variable = burnup
[]
[burnup_max]
type = ElementExtremeValue
block = fuel
variable = burnup
[]
[fission_rate_avg]
type = ElementAverageValue
variable = fission_rate
block = fuel
[]
# fission gas information
[fg_produced]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_produced
block = fuel
[]
[fg_released]
type = ADElementIntegralMaterialProperty
mat_prop = fgm_released
block = fuel
execute_on = 'initial timestep_end'
[]
[fg_percent]
type = FGRPercent
fission_gas_released = fg_released
fission_gas_generated = fg_produced
[]
[interconnected_porosity_fuel_avg]
type = ElementAverageValue
variable = interconnected_porosity
block = fuel
execute_on = 'initial timestep_end'
[]
[porosity_fuel_avg]
type = ElementAverageValue
variable = porosity
block = fuel
[]
[porosity_fuel_max]
type = ElementExtremeValue
variable = porosity
block = fuel
[]
[porosity_fuel_min]
type = ElementExtremeValue
variable = porosity
value_type = min
block = fuel
[]
[porosity_sodium_logging_avg]
type = ElementAverageValue
variable = sodium_logged_porosity
block = fuel
[]
# extras
[actual_time_step_limit]
type = MaterialTimeStepPostprocessor
block = 'fuel ${cladding_block}'
outputs = none
[]
[actual_fuel_time_step_limit]
type = MaterialTimeStepPostprocessor
block = 'fuel'
outputs = 'console'
[]
[actual_cladding_time_step_limit]
type = MaterialTimeStepPostprocessor
block = '${cladding_block}'
outputs = 'console'
[]
[time_step_limit]
type = ParsedPostprocessor
expression = 'if(actual_time_step_limit > 1e6, 1e6, actual_time_step_limit)'
pp_names = 'actual_time_step_limit'
[]
[max_wastagethickness]
type = ElementExtremeValue
value_type = max
variable = wastage_thickness
[]
[max_wst_temp]
type = ElementExtremeValue
value_type = max
variable = temp
proxy_variable = wastage_thickness
block = '${cladding_block}'
[]
[max_wst_burnup]
type = ElementExtremeValue
value_type = max
variable = burnup
proxy_variable = wastage_thickness
block = '${cladding_block}'
[]
[max_cdf]
type = ElementExtremeValue
value_type = max
variable = cumulative_damage_index
[]
# OPTD
[temp_tc1]
type = PointValue
point = ${p_tc1}
variable = temp
[]
[temp_tc2]
type = PointValue
point = ${p_tc2}
variable = temp
[]
[temp_tc3]
type = PointValue
point = ${p_tc3}
variable = temp
[]
[temp_tc4]
type = PointValue
point = ${p_tc4}
variable = temp
[]
[temp_tc5]
type = PointValue
point = ${p_tc5}
variable = temp
[]
[temp_tc6]
type = PointValue
point = ${p_tc6}
variable = temp
[]
[max_vm]
type = ElementExtremeValue
value_type = max
block = cladding
variable = vonmises_stress
[]
[max_pen_total]
type = VectorPostprocessorReductionValue
vector_name = total_id_reduction
vectorpostprocessor = id_pen_total
value_type = max
[]
[]
[VectorPostprocessors]
[id_wastage]
type = FuelRodLineValueSampler
variable = wastage_thickness
material = 'clad'
fraction = 0.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[id_pen_total]
type = FuelRodLineValueSampler
variable = total_id_reduction
material = 'clad'
fraction = 0.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[od_wastage]
type = FuelRodLineValueSampler
variable = cc_wastage_thickness
material = 'clad'
fraction = 1.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[fuel_melting]
type = FuelRodLineValueSampler
variable = fuel_melting_thickness
material = 'fuel'
fraction = 1.0
num_points = 600
orientation = 'vertical'
fuel_pin_geometry = 'pin_geometry'
execute_on = 'initial timestep_end'
allow_duplicate_execution_on_initial = true
outputs = none
[]
[]
[PerformanceMetricOutputs]
outputs = 'console'
[]
[Outputs]
print_linear_residuals = true
color = true
perf_graph = true
sync_times = ${time_spots}
[checkpoint]
type = Checkpoint
time_step_interval = 1
enable = false
[]
[exodus]
type = Exodus
time_step_interval = 500
sync_times = ${time_spots}
enable = false
[]
[ext]
type = Exodus
time_step_interval = 5
enable = true
[]
[console]
type = Console
show = 'time_step_size temp_fuel_avg temp_fuel_centerline_max temp_cladding_avg temp_cladding_max stress_vonmises_fuel_max stress_hydro_fuel_max stress_hydro_fuel_min contact_pressure_max strain_axial_fuel_avg power_integral burnup_avg fission_rate_avg fg_percent porosity_fuel_avg time_step_limit anisotropic_swelling_factor plenum_ratio volume_fuel volume_plenum max_wastagethickness temp_tc1 temp_tc2 temp_tc3 temp_tc4 temp_tc5 temp_tc6 _transient_t max_vm max_pen_total actual_fuel_time_step_limit actual_cladding_time_step_limit max_cdf'
[]
[csv_general]
type = CSV
file_base = 'FM-1/FM-1_csv_general'
[]
[csv_gold]
type = CSV
show = 'temp_tc1 temp_tc2 temp_tc3 temp_tc4 temp_tc5 temp_tc6 _transient_t max_vm max_pen_total max_cdf'
sync_only = true
sync_times = '${fparse run_time+10} ${fparse run_time+20} ${fparse run_time+50} ${fparse run_time+100} ${fparse run_time+200}
${fparse run_time+500} ${fparse run_time+1000} ${fparse run_time+2000} ${fparse run_time+3000} ${fparse run_time+4000}
${fparse run_time+5000} ${fparse run_time+6000}'
file_base = 'FM-1/FM-1_gold'
[]
[]
[Debug]
show_var_residual = 'disp_x disp_y temp'
show_var_residual_norms = true
[]
(assessment/metallic_fuel/FBTA/analysis/steady_state/common_inputs/ss316_clad_base.i)
# SS316 Cladding
clad_density = 7980.0 # SS316 RT Density (same as D9)
[Physics/SolidMechanics/QuasiStatic]
[cladding]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = '${cladding_block}'
eigenstrain_names = 'cladding_thermal_eigenstrain clad_swelling'
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[]
[Materials]
[clad_elasticity_tensor]
type = ADSS316ElasticityTensor
temperature = temp
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
block = ${cladding_block}
elastic_constants_model = legacy_ifr
[]
[clad_stress]
type = ADComputeMultipleInelasticStress
# tangent_operator = nonlinear
inelastic_models = 'clad_creep'
block = ${cladding_block}
[]
[clad_creep]
type = ADSS316CreepUpdate
block = ${cladding_block}
temperature = temp
fast_neutron_flux = fast_neutron_flux
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
[]
[thermal_expansion]
type = ADSS316ThermalExpansionEigenstrain
block = ${cladding_block}
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = cladding_thermal_eigenstrain
outputs = all
[]
[clad_swelling]
type = ADSS316VolumetricSwellingEigenstrain
eigenstrain_name = clad_swelling
fast_neutron_fluence = fast_neutron_fluence
fast_neutron_flux = fast_neutron_flux
temperature = temp
outputs = all
block = ${cladding_block}
[]
[clad_thermal]
type = ADSS316Thermal
block = ${cladding_block}
temperature = temp
[]
[clad_density]
type = ADStrainAdjustedDensity
block = ${cladding_block}
strain_free_density = ${clad_density}
[]
[clad_failure]
type = D9FailureClad
block = ${cladding_block}
method = steady_state
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = flux_ss316
temperature = temp
scale_factor = 1
boundary = cladding_inside_right
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = SS316
use_effective_method = true
temperature = temp
scale_factor = 1
boundary = cladding_outside_right
outputs = all
[]
[]
(test/tests/ADMetallicFuelWastage/ad_flux_burnup_ht9-jac.i)
# This tests the AD jacobian for ADMetallicFuelWastage (flux_burnup_ht9)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Variables]
[temp]
[]
[]
[ICs]
[temp]
type = ConstantIC
variable = temp
value = 300
[]
[]
[BCs]
[left]
type = ADDirichletBC
variable = temp
boundary = 3
value = 1000
[]
[right]
type = ADFunctionDirichletBC
variable = temp
boundary = 1
function = right_temp
[]
[]
[Kernels]
[temp_diff]
type = ADHeatConduction
variable = temp
thermal_conductivity = 15.0
[]
[temp_dt]
type = ADHeatConductionTimeDerivative
variable = temp
specific_heat = 100.0
density_name = 7900
[]
[]
[Functions]
[right_temp]
type = ParsedFunction
expression = 1000.0/(1.0+wt*1000)
symbol_names = 'wt'
symbol_values = 'avg_wastage'
[]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[fast_neutron_flux]
type = FastNeutronFlux
factor = 1E19
outputs = all
[]
[converter]
type = MaterialADConverter
reg_props_in = 'fast_neutron_flux'
ad_props_out = 'ad_fast_neutron_flux'
[]
[wastage]
type = ADMetallicFuelWastage
fast_neutron_flux = 'ad_fast_neutron_flux'
method = flux_burnup_ht9
temperature = temp
scale_factor = 1.0
boundary = 3
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[avg_wastage]
type = ElementAverageValue
variable = wastage_thickness
[]
[avg_temp]
type = ElementAverageValue
variable = temp
[]
[]
(assessment/metallic_fuel/FBTA/analysis/steady_state/common_inputs/ht9_clad_base.i)
# HT9 Cladding
clad_density = 7778.0 # HT9 RT Density MFH
[Physics/SolidMechanics/QuasiStatic]
[cladding]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress creep_strain_xx creep_strain_yy creep_strain_zz elastic_strain_xx elastic_strain_yy elastic_strain_zz strain_xx strain_yy strain_zz'
extra_vector_tags = 'ref'
block = '${cladding_block}'
eigenstrain_names = 'cladding_thermal_eigenstrain' # No swelling considered for HT9
use_automatic_differentiation = true
volumetric_locking_correction = true
[]
[]
[Materials]
[clad_elasticity_tensor]
type = ADHT9ElasticityTensor
temperature = temp
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
block = ${cladding_block}
[]
[clad_stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'clad_creep'
block = ${cladding_block}
[]
[clad_creep]
type = ADHT9CreepUpdate
block = ${cladding_block}
temperature = temp
fast_neutron_flux = fast_neutron_flux
primary_creep_model = MFH
secondary_creep_model = MFH
irradiation_creep_model = MFH
use_effective_time_for_primary = true
id_wastage_degradation_function = id_vpp_func
od_wastage_degradation_function = od_vpp_func
[]
[thermal_expansion]
type = ADHT9ThermalExpansionEigenstrain
block = ${cladding_block}
temperature = temp
stress_free_temperature = 295.0
eigenstrain_name = cladding_thermal_eigenstrain
outputs = all
[]
[clad_thermal]
type = ADHT9Thermal
block = ${cladding_block}
temperature = temp
[]
[clad_density]
type = ADStrainAdjustedDensity
block = ${cladding_block}
strain_free_density = ${clad_density}
[]
[clad_failure]
type = HT9FailureClad
block = ${cladding_block}
method = cdf_long
temperature = temp
outputs = all
hoop_stress = stress_zz # Since 2D-RZ
[]
[wastage_thickness]
type = ADMetallicFuelWastage
method = burnup_ht9_opt
burnup = burnup
temperature = temp
scale_factor = 1
boundary = cladding_inside_right
outputs = all
[]
[cc_wastage_thickness]
type = ADMetallicFuelCoolantWastage
clad_material = HT9
use_effective_method = true
temperature = temp
scale_factor = 1
boundary = cladding_outside_right
outputs = all
[]
[]
(test/tests/ADMetallicFuelWastage/ad_burnup_ht9_opt.i)
# This test is to verify the calculation in ADMetallicFuelWastage (burnup_ht9_opt)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[Problem]
solve = false
[]
[AuxVariables]
[temp]
initial_condition = 1000
[]
[]
[AuxKernels]
[temp]
type = ConstantAux
variable = temp
value = 1000
[]
[]
[Functions]
[fission_rate_fcn]
type = ParsedFunction
expression = t*1E11
[]
[]
[Materials]
[fission_rate]
type = ADGenericFunctionMaterial
prop_names = 'fission_rate'
prop_values = 'fission_rate_fcn'
outputs = all
[]
[burnup]
type = ADUPuZrBurnup
density = 100
initial_X_Pu = 0.1
initial_X_Zr = 0.1
outputs = all
[]
[wastage]
type = ADMetallicFuelWastage
method = burnup_ht9_opt
temperature = temp
fast_neutron_flux = 0.0
scale_factor = 1.0
outputs = all
[]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 1.0e6
[]
[Postprocessors]
[fsnrate_avg]
type = ElementAverageValue
variable = fission_rate
[]
[burnup_avg]
type = ElementAverageValue
variable = burnup
[]
[wastage_avg]
type = ElementAverageValue
variable = wastage_thickness
[]
[temp_avg]
type = ElementAverageValue
variable = temp
[]
[]
[Outputs]
csv = true
[]