transient_ex2.C File Reference

Go to the source code of this file.

Functions
void	assemble_wave (EquationSystems &es, const std::string &system_name)
void	apply_initial (EquationSystems &es, const std::string &system_name)
void	fill_dirichlet_bc (EquationSystems &es, const std::string &system_name)
int	main (int argc, char **argv)

Function Documentation

apply_initial()

void apply_initial	(	EquationSystems &	es,
		const std::string &	system_name
	)

Definition at line 538 of file transient_ex2.C.

{
  // Get a reference to our system, as before
  NewmarkSystem & t_system = es.get_system<NewmarkSystem> (system_name);
 
  // Numeric vectors for the pressure, velocity and acceleration
  // values.
  NumericVector<Number> & pres_vec = t_system.get_vector("displacement");
  NumericVector<Number> & vel_vec  = t_system.get_vector("velocity");
  NumericVector<Number> & acc_vec  = t_system.get_vector("acceleration");
 
  // Assume our fluid to be at rest, which would
  // also be the default conditions in class NewmarkSystem,
  // but let us do it explicitly here.
  pres_vec.zero();
  vel_vec.zero();
  acc_vec.zero();
}

References libMesh::EquationSystems::get_system(), libMesh::System::get_vector(), and libMesh::NumericVector< T >::zero().

Referenced by main().

assemble_wave()

void assemble_wave	(	EquationSystems &	es,
		const std::string &	system_name
	)

Definition at line 318 of file transient_ex2.C.

{
  // It is a good idea to make sure we are assembling
  // the proper system.
  libmesh_assert_equal_to (system_name, "Wave");
 
  // Get a constant reference to the mesh object.
  const MeshBase & mesh = es.get_mesh();
 
  // The dimension that we are running.
  const unsigned int dim = mesh.mesh_dimension();
 
  // Copy the speed of sound to a local variable.
  const Real speed = es.parameters.get<Real>("speed");
 
  // If we added Neumann conditions we would need density too
  // const Real rho   = es.parameters.get<Real>("fluid density");
 
  // Get a reference to our system, as before.
  NewmarkSystem & t_system = es.get_system<NewmarkSystem> (system_name);
 
  // Get a constant reference to the Finite Element type
  // for the first (and only) variable in the system.
  FEType fe_type = t_system.get_dof_map().variable_type(0);
 
  // In here, we will add the element matrices to the
  // @e additional matrices "stiffness_mass" and "damping"
  // and the additional vector "force", not to the members
  // "matrix" and "rhs".  Therefore, get writable
  // references to them.
  SparseMatrix<Number> & stiffness = t_system.get_matrix("stiffness");
  SparseMatrix<Number> & damping   = t_system.get_matrix("damping");
  SparseMatrix<Number> & mass      = t_system.get_matrix("mass");
  NumericVector<Number> & force    = t_system.get_vector("force");
 
  // Some solver packages (PETSc) are especially picky about
  // allocating sparsity structure and truly assigning values
  // to this structure.  Namely, matrix additions, as performed
  // later, exhibit acceptable performance only for identical
  // sparsity structures.  Therefore, explicitly zero the
  // values in the collective matrix, so that matrix additions
  // encounter identical sparsity structures.
  SparseMatrix<Number> & matrix = *t_system.matrix;
  DenseMatrix<Number> zero_matrix;
 
  // Build a Finite Element object of the specified type.  Since the
  // FEBase::build() member dynamically creates memory we will
  // store the object as a std::unique_ptr<FEBase>.  This can be thought
  // of as a pointer that will clean up after itself.
  std::unique_ptr<FEBase> fe (FEBase::build(dim, fe_type));
 
  // A 2nd order Gauss quadrature rule for numerical integration.
  QGauss qrule (dim, SECOND);
 
  // Tell the finite element object to use our quadrature rule.
  fe->attach_quadrature_rule (&qrule);
 
  // The element Jacobian * quadrature weight at each integration point.
  const std::vector<Real> & JxW = fe->get_JxW();
 
  // The element shape functions evaluated at the quadrature points.
  const std::vector<std::vector<Real>> & phi = fe->get_phi();
 
  // The element shape function gradients evaluated at the quadrature
  // points.
  const std::vector<std::vector<RealGradient>> & dphi = fe->get_dphi();
 
  // A reference to the DofMap object for this system.  The DofMap
  // object handles the index translation from node and element numbers
  // to degree of freedom numbers.
  const DofMap & dof_map = t_system.get_dof_map();
 
  // The element mass, damping and stiffness matrices
  // and the element contribution to the rhs.
  DenseMatrix<Number> Ke, Ce, Me;
  DenseVector<Number> Fe;
 
  // This vector will hold the degree of freedom indices for
  // the element.  These define where in the global system
  // the element degrees of freedom get mapped.
  std::vector<dof_id_type> dof_indices;
 
  // Now we will loop over all the elements in the mesh.
  // We will compute the element matrix and right-hand-side
  // contribution.
  for (const auto & elem : mesh.active_local_element_ptr_range())
    {
      // Get the degree of freedom indices for the
      // current element.  These define where in the global
      // matrix and right-hand-side this element will
      // contribute to.
      dof_map.dof_indices (elem, dof_indices);
 
      // Compute the element-specific data for the current
      // element.  This involves computing the location of the
      // quadrature points (q_point) and the shape functions
      // (phi, dphi) for the current element.
      fe->reinit (elem);
 
      // Zero the element matrices and rhs before
      // summing them.  We use the resize member here because
      // the number of degrees of freedom might have changed from
      // the last element.  Note that this will be the case if the
      // element type is different (i.e. the last element was HEX8
      // and now have a PRISM6).
      {
        const unsigned int n_dof_indices = dof_indices.size();
 
        Ke.resize          (n_dof_indices, n_dof_indices);
        Ce.resize          (n_dof_indices, n_dof_indices);
        Me.resize          (n_dof_indices, n_dof_indices);
        zero_matrix.resize (n_dof_indices, n_dof_indices);
        Fe.resize          (n_dof_indices);
      }
 
      // Now loop over the quadrature points.  This handles
      // the numeric integration.
      for (unsigned int qp=0; qp<qrule.n_points(); qp++)
        {
          // Now we will build the element matrix.  This involves
          // a double loop to integrate the test functions (i) against
          // the trial functions (j).
          for (std::size_t i=0; i<phi.size(); i++)
            for (std::size_t j=0; j<phi.size(); j++)
              {
                Ke(i,j) += JxW[qp]*(dphi[i][qp]*dphi[j][qp]);
                Me(i,j) += JxW[qp]*phi[i][qp]*phi[j][qp]
                  *1./(speed*speed);
              } // end of the matrix summation loop
        } // end of quadrature point loop
 
      // Now compute the contribution to the element matrix and the
      // right-hand-side vector if the current element lies on the
      // boundary.
      {
        // In this example no natural boundary conditions will
        // be considered.  The code is left here so it can easily
        // be extended.
        //
        // don't do this for any side
#if 0
        for (auto side : elem->side_index_range())
          if (elem->neighbor_ptr(side) == nullptr)
            {
              // Declare a special finite element object for
              // boundary integration.
              std::unique_ptr<FEBase> fe_face (FEBase::build(dim, fe_type));
 
              // Boundary integration requires one quadrature rule,
              // with dimensionality one less than the dimensionality
              // of the element.
              QGauss qface(dim-1, SECOND);
 
              // Tell the finite element object to use our
              // quadrature rule.
              fe_face->attach_quadrature_rule (&qface);
 
              // The value of the shape functions at the quadrature
              // points.
              const std::vector<std::vector<Real>> &  phi_face = fe_face->get_phi();
 
              // The Jacobian * Quadrature Weight at the quadrature
              // points on the face.
              const std::vector<Real> & JxW_face = fe_face->get_JxW();
 
              // Compute the shape function values on the element
              // face.
              fe_face->reinit(elem, side);
 
              // Here we consider a normal acceleration acc_n=1 applied to
              // the whole boundary of our mesh.
              const Real acc_n_value = 1.0;
 
              // Loop over the face quadrature points for integration.
              for (unsigned int qp=0; qp<qface.n_points(); qp++)
                {
                  // Right-hand-side contribution due to prescribed
                  // normal acceleration.
                  for (std::size_t i=0; i<phi_face.size(); i++)
                    {
                      Fe(i) += acc_n_value*rho
                        *phi_face[i][qp]*JxW_face[qp];
                    }
                } // end face quadrature point loop
            } // end if (elem->neighbor_ptr(side) == nullptr)
#endif // 0
 
        // In this example the Dirichlet boundary conditions will be
        // imposed via penalty method after the
        // system is assembled.
 
      } // end boundary condition section
 
      // If this assembly program were to be used on an adaptive mesh,
      // we would have to apply any hanging node constraint equations
      // by uncommenting the following lines:
      // std::vector<unsigned int> dof_indicesC = dof_indices;
      // std::vector<unsigned int> dof_indicesM = dof_indices;
      // dof_map.constrain_element_matrix_and_vector (Ke, Fe, dof_indices);
      // dof_map.constrain_element_matrix (Ce, dof_indicesC);
      // dof_map.constrain_element_matrix (Me, dof_indicesM);
 
      // Finally, simply add the contributions to the additional
      // matrices and vector.
      stiffness.add_matrix (Ke, dof_indices);
      damping.add_matrix   (Ce, dof_indices);
      mass.add_matrix      (Me, dof_indices);
 
      force.add_vector     (Fe, dof_indices);
 
      // For the overall matrix, explicitly zero the entries where
      // we added values in the other ones, so that we have
      // identical sparsity footprints.
      matrix.add_matrix(zero_matrix, dof_indices);
 
    } // end of element loop
}

References libMesh::SparseMatrix< T >::add_matrix(), libMesh::NumericVector< T >::add_vector(), libMesh::FEGenericBase< OutputType >::build(), dim, libMesh::DofMap::dof_indices(), libMesh::Parameters::get(), libMesh::EquationSystems::get_mesh(), libMesh::EquationSystems::get_system(), mesh, libMesh::MeshBase::mesh_dimension(), libMesh::QBase::n_points(), libMesh::EquationSystems::parameters, libMesh::Real, libMesh::DenseVector< T >::resize(), libMesh::DenseMatrix< T >::resize(), and libMesh::SECOND.

Referenced by main().

fill_dirichlet_bc()

void fill_dirichlet_bc	(	EquationSystems &	es,
		const std::string &	system_name
	)

Definition at line 559 of file transient_ex2.C.

{
  // It is a good idea to make sure we are assembling
  // the proper system.
  libmesh_assert_equal_to (system_name, "Wave");
 
  // Get a reference to our system, as before.
  NewmarkSystem & t_system = es.get_system<NewmarkSystem> (system_name);
 
  // Get writable references to the overall matrix and vector.
  SparseMatrix<Number> & matrix = *t_system.matrix;
  NumericVector<Number> & rhs    = *t_system.rhs;
 
  // Get a constant reference to the mesh object.
  const MeshBase & mesh = es.get_mesh();
 
  // Get libMesh's pi
  const Real pi = libMesh::pi;
 
  // Ask the EquationSystems flag whether
  // we should do this also for the matrix
  const bool do_for_matrix =
    es.parameters.get<bool>("Newmark set BC for Matrix");
 
  // Number of nodes in the mesh.
  unsigned int n_nodes = mesh.n_nodes();
 
  for (unsigned int n_cnt=0; n_cnt<n_nodes; n_cnt++)
    {
      // Get a reference to the current node.
      const Node & curr_node = mesh.node_ref(n_cnt);
 
      // Check if Dirichlet BCs should be applied to this node.
      // Use the TOLERANCE from mesh_common.h as tolerance.
      // Here a pressure value is applied if the z-coord.
      // is equal to 4, which corresponds to one end of the
      // pipe-mesh in this directory.
      const Real z_coo = 4.;
 
      if (std::abs(curr_node(2)-z_coo) < TOLERANCE)
        {
          // The global number of the respective degree of freedom.
          unsigned int dn = curr_node.dof_number(0, 0, 0);
 
          // The penalty parameter.
          const Real penalty = 1.e10;
 
          // Here we apply sinusoidal pressure values for 0<t<0.002
          // at one end of the pipe-mesh.
          Real p_value;
          if (t_system.time < .002)
            p_value = sin(2*pi*t_system.time/.002);
          else
            p_value = .0;
 
          // Now add the contributions to the matrix and the rhs.
          rhs.add(dn, p_value*penalty);
 
          // Add the penalty parameter to the global matrix
          // if desired.
          if (do_for_matrix)
            matrix.add(dn, dn, penalty);
        }
    } // loop n_cnt
}

References libMesh::NumericVector< T >::add(), libMesh::DofObject::dof_number(), libMesh::Parameters::get(), libMesh::EquationSystems::get_mesh(), libMesh::EquationSystems::get_system(), libMesh::ImplicitSystem::matrix, mesh, libMesh::MeshBase::n_nodes(), n_nodes, libMesh::MeshBase::node_ref(), libMesh::EquationSystems::parameters, libMesh::pi, libMesh::Real, libMesh::ExplicitSystem::rhs, libMesh::System::time, and libMesh::TOLERANCE.

Referenced by main().

main()

int main	(	int	argc,
		char **	argv
	)

Definition at line 100 of file transient_ex2.C.

{
  // Initialize libraries, like in example 2.
  LibMeshInit init (argc, argv);
 
  // This example requires a linear solver package.
  libmesh_example_requires(libMesh::default_solver_package() != INVALID_SOLVER_PACKAGE,
                           "--enable-petsc, --enable-trilinos, or --enable-eigen");
 
  // Check for proper usage.
  libmesh_error_msg_if(argc < 2, "Usage: " << argv[0] << " [meshfile]");
 
  // Tell the user what we are doing.
  libMesh::out << "Running " << argv[0];
 
  for (int i=1; i<argc; i++)
    libMesh::out << " " << argv[i];
 
  libMesh::out << std::endl << std::endl;
 
  // LasPack solvers don't work so well for this example, Trilinos doesn't work at all.
  // PETSc and Eigen both work...
  libmesh_example_requires(libMesh::default_solver_package() == PETSC_SOLVERS || \
                           libMesh::default_solver_package() == EIGEN_SOLVERS, "--enable-petsc");
 
  // Get the name of the mesh file
  // from the command line.
  std::string mesh_file = argv[1];
  libMesh::out << "Mesh file is: " << mesh_file << std::endl;
 
  // Skip this 3D example if libMesh was compiled as 1D or 2D-only.
  libmesh_example_requires(3 <= LIBMESH_DIM, "3D support");
 
  // Create a mesh.
  // This example directly references all mesh nodes and is
  // incompatible with DistributedMesh use.
  //
  // Create a ReplicatedMesh object, with dimension to be overridden
  // later, distributed across the default MPI communicator.
  ReplicatedMesh mesh(init.comm());
 
  // Read the meshfile specified on the command line.
  mesh.read(mesh_file);
 
  // Print information about the mesh to the screen.
  mesh.print_info();
 
  // The node that should be monitored.
  const unsigned int result_node = 274;
 
 
  // Time stepping issues
  //
  // Note that the total current time is stored as a parameter
  // in the \pEquationSystems object.
  //
  // the time step size
  const Real delta_t = .0000625;
 
  // The number of time steps.
  unsigned int n_time_steps = 300;
 
  // Create an equation systems object.
  EquationSystems equation_systems (mesh);
 
  // Declare the system and its variables.
  // Create a NewmarkSystem named "Wave"
  equation_systems.add_system<NewmarkSystem> ("Wave");
 
  // Use a handy reference to this system
  NewmarkSystem & t_system = equation_systems.get_system<NewmarkSystem> ("Wave");
 
  // Add the variable "p" to "Wave".   "p"
  // will be approximated using first-order approximation.
  t_system.add_variable("p", FIRST);
 
  // Give the system a pointer to the matrix assembly
  // function and the initial condition function defined
  // below.
  t_system.attach_assemble_function  (assemble_wave);
  t_system.attach_init_function      (apply_initial);
 
  // Set the time step size, and optionally the
  // Newmark parameters, so that NewmarkSystem can
  // compute integration constants.  Here we simply use
  // pass only the time step and use default values
  // for alpha=.25  and delta=.5.
  t_system.set_newmark_parameters(delta_t);
 
  // Set the speed of sound and fluid density
  // as EquationSystems parameter,
  // so that assemble_wave() can access it.
  equation_systems.parameters.set<Real>("speed")          = 1000.;
  equation_systems.parameters.set<Real>("fluid density")  = 1000.;
 
  // Start time integration from t=0
  t_system.time = 0.;
 
  // Initialize the data structures for the equation system.
  equation_systems.init();
 
  // Prints information about the system to the screen.
  equation_systems.print_info();
 
  // A file to store the results at certain nodes.
  std::ofstream res_out("pressure_node.res");
 
  // get the dof_numbers for the nodes that
  // should be monitored.
  const unsigned int res_node_no = result_node;
  const Node & res_node = mesh.node_ref(res_node_no-1);
  unsigned int dof_no = res_node.dof_number(0, 0, 0);
 
  // Assemble the time independent system matrices and rhs.
  // This function will also compute the effective system matrix
  // K~=K+a_0*M+a_1*C and apply user specified initial
  // conditions.
  t_system.assemble();
 
  // Now solve for each time step.
  // For convenience, use a local buffer of the
  // current time.  But once this time is updated,
  // also update the EquationSystems parameter
  // Start with t_time = 0 and write a short header
  // to the nodal result file
  res_out << "# pressure at node " << res_node_no << "\n"
          << "# time\tpressure\n"
          << t_system.time << "\t" << 0 << std::endl;
 
 
  for (unsigned int time_step=0; time_step<n_time_steps; time_step++)
    {
      // Update the time.  Both here and in the
      // EquationSystems object
      t_system.time += delta_t;
 
      // Update the rhs.
      t_system.update_rhs();
 
      // Impose essential boundary conditions.
      // Not that since the matrix is only assembled once,
      // the penalty parameter should be added to the matrix
      // only in the first time step.  The applied
      // boundary conditions may be time-dependent and hence
      // the rhs vector is considered in each time step.
      if (time_step == 0)
        {
          // The local function fill_dirichlet_bc()
          // may also set Dirichlet boundary conditions for the
          // matrix.  When you set the flag as shown below,
          // the flag will return true.  If you want it to return
          // false, simply do not set it.
          equation_systems.parameters.set<bool>("Newmark set BC for Matrix") = true;
 
          fill_dirichlet_bc(equation_systems, "Wave");
 
          // unset the flag, so that it returns false
          equation_systems.parameters.set<bool>("Newmark set BC for Matrix") = false;
        }
      else
        fill_dirichlet_bc(equation_systems, "Wave");
 
      // Solve the system "Wave".
      t_system.solve();
 
      // After solving the system, write the solution
      // to a GMV-formatted plot file.
      // Do only for a few time steps.
      if (time_step == 30 || time_step == 60 ||
          time_step == 90 || time_step == 120)
        {
          std::ostringstream file_name;
 
#ifdef LIBMESH_HAVE_VTK
          file_name << "out_"
                    << std::setw(3)
                    << std::setfill('0')
                    << std::right
                    << time_step
                    << ".pvtu";
 
          VTKIO(mesh).write_equation_systems (file_name.str(), equation_systems);
#else
 
          file_name << "out."
                    << std::setw(3)
                    << std::setfill('0')
                    << std::right
                    << time_step
                    << ".gmv";
 
          GMVIO(mesh).write_equation_systems (file_name.str(), equation_systems);
#endif
        }
 
      // Update the p, v and a.
      t_system.update_u_v_a();
 
      // dof_no may not be local in parallel runs, so we may need a
      // global displacement vector
      NumericVector<Number> & displacement = t_system.get_vector("displacement");
      std::vector<Number> global_displacement(displacement.size());
      displacement.localize(global_displacement);
 
      // Write nodal results to file.  The results can then
      // be viewed with e.g. gnuplot (run gnuplot and type
      // 'plot "pressure_node.res" with lines' in the command line)
      res_out << t_system.time << "\t"
              << global_displacement[dof_no]
              << std::endl;
    }
 
  // All done.
  return 0;
}

References libMesh::EquationSystems::add_system(), libMesh::System::add_variable(), apply_initial(), assemble_wave(), libMesh::default_solver_package(), libMesh::DofObject::dof_number(), libMesh::EIGEN_SOLVERS, fill_dirichlet_bc(), libMesh::FIRST, libMesh::EquationSystems::get_system(), libMesh::EquationSystems::init(), libMesh::INVALID_SOLVER_PACKAGE, libMesh::NumericVector< T >::localize(), main(), mesh, libMesh::MeshBase::node_ref(), libMesh::out, libMesh::EquationSystems::parameters, libMesh::PETSC_SOLVERS, libMesh::EquationSystems::print_info(), libMesh::MeshBase::print_info(), libMesh::MeshBase::read(), libMesh::Real, libMesh::Parameters::set(), libMesh::NumericVector< T >::size(), and libMesh::MeshOutput< MT >::write_equation_systems().