Electromagnetics Verification and Validation Report

Introduction

The VVR for the Electromagnetics module provides evidence that the Electromagnetics module fulfills its intended purpose.

Dependencies

The Electromagnetics module is developed using MOOSE and can itself be based on various MOOSE modules, as such the VVR for the Electromagnetics module is dependent upon the following documents.

Framework Verification and Validation Report

Verification

The following lists all the verification test cases and the associated documentation for the Electromagnetics module.

electromagnetics: Verification
4.3.1The system shall calculate the static far field pattern of a half-wave dipole antenna.
Specification(s): time_harmonic
Design: Dipole Antenna Benchmark
Issue(s): #21086
Collection(s): FUNCTIONAL
Type(s): Exodiff
78
Verification: Dipole Antenna Benchmark
4.3.2The system shall calculate the transient far field pattern of a half-wave dipole antenna.
Specification(s): transient
Design: Dipole Antenna Benchmark
Issue(s): #21086
Collection(s): FUNCTIONAL
Type(s): Exodiff
78
Verification: Dipole Antenna Benchmark
4.3.3The system shall calculate the fundamental waveguide cutoff wavenumber for a TM mode for a rectangular waveguide geometry.
Specification(s): rectangular
Design: Waveguide Eigenvalue Benchmark
Issue(s): #21202
Collection(s): FUNCTIONAL
Type(s): CSVDiff
78
Verification: Waveguide Eigenvalue Benchmark
4.3.4The system shall calculate the fundamental waveguide cutoff wavenumber for a TM mode for a circular waveguide geometry.
Specification(s): circular
Design: Waveguide Eigenvalue Benchmark
Issue(s): #21202
Collection(s): FUNCTIONAL
Type(s): CSVDiff
78
Verification: Waveguide Eigenvalue Benchmark
4.3.5The system shall calculate the fundamental waveguide cutoff wavenumber for a TM mode for a coaxial waveguide geometry.
Specification(s): coaxial
Design: Waveguide Eigenvalue Benchmark
Issue(s): #21202
Collection(s): FUNCTIONAL
Type(s): CSVDiff
78
Verification: Waveguide Eigenvalue Benchmark
4.3.6The system shall calculate the evanescent wave decay for a waveguide structure below the cutoff frequency.
Specification(s): time_harmonic
Design: Evanescent Wave Decay Benchmark
Issue(s): #13744
Collection(s): FUNCTIONAL
Type(s): Exodiff
78
Verification: Evanescent Wave Decay Benchmark
4.3.7The system shall calculate the reflection of a 1D electric field plane wave in a metal backed dielectric slab.
Specification(s): electric
Design: 1D Reflection Benchmark
Issue(s): #13744
Collection(s): FUNCTIONAL
Type(s): CSVDiff
78
Verification: 1D Reflection Benchmark
4.3.8The system shall be able to simulate a 2D electric field waveguide with boundary conditions for wave launching, absorption, and conducting walls for scalar field variables.
Specification(s): test
Design: ADMatReaction EMRobinBC Waveguide Transmission Benchmark
Issue(s): #21098
Collection(s): FUNCTIONAL
Type(s): Exodiff
20
Verification: Waveguide Transmission Benchmark
4.4.11The system shall calculate the correct electrostatic contact potential solution when compared to an analytic result, given a one-dimensional, two-material-block scenario.
Specification(s): electrostatic_contact_analytic_solution_test_two_block
Design: ElectrostaticContactCondition
Issue(s): #21096
Collection(s): FUNCTIONAL
Type(s): CSVDiff
78
Verification: Electrostatic Contact Verification (Two Block Test)
4.4.12The system shall calculate the correct electrostatic contact potential solution when compared to an analytic result, given a one-dimensional, three-material-block scenario.
Specification(s): electrostatic_contact_analytic_solution_test_three_block
Design: ElectrostaticContactCondition
Issue(s): #21096
Collection(s): FUNCTIONAL
Type(s): CSVDiff
78
Verification: Electrostatic Contact Verification (Three Block Test)

Validation

The following lists all the validation test cases and the associated documentation for the Electromagnetics module.

[time_harmonic]
  type = Exodiff
  input = 'dipole.i'
  exodiff = 'dipole_out.e'
  cli_args = 'Mesh/refine/refinement=0'
  requirement = 'The system shall calculate the static far field pattern of a half-wave dipole antenna.'
  design = 'benchmarks/DipoleAntenna.md'
  verification = 'benchmarks/DipoleAntenna.md'
  issues = '#21086'
[]


[transient]
  type = Exodiff
  input = 'dipole_transient.i'
  exodiff = 'dipole_transient_out.e'
  cli_args = 'Executioner/num_steps=10'
  requirement = 'The system shall calculate the transient far field pattern of a half-wave dipole antenna.'
  design = 'benchmarks/DipoleAntenna.md'
  verification = 'benchmarks/DipoleAntenna.md'
  issues = '#21086'
[]

[rectangular]
  type = CSVDiff
  input = 'eigen_base.i'
  csvdiff = 'eigen_rectangular_out_eigenvalues_0002.csv'
  cli_args = 'Outputs/file_base=eigen_rectangular_out'
  valgrind = heavy
  requirement = 'The system shall calculate the fundamental waveguide cutoff wavenumber for a TM mode for a rectangular waveguide geometry.'
  design = 'benchmarks/WaveguideEigenvalue.md'
  verification = 'benchmarks/WaveguideEigenvalue.md'
  issues = '#21202'
[]


[circular]
  type = CSVDiff
  input = 'eigen_base.i'
  csvdiff = 'eigen_circular_out_eigenvalues_0002.csv'
  cli_args = 'Outputs/file_base=eigen_circular_out BCs/active="circle eigen_circle" Mesh/fmg/file=circle.msh'
  requirement = 'The system shall calculate the fundamental waveguide cutoff wavenumber for a TM mode for a circular waveguide geometry.'
  design = 'benchmarks/WaveguideEigenvalue.md'
  verification = 'benchmarks/WaveguideEigenvalue.md'
  issues = '#21202'
[]


[coaxial]
  type = CSVDiff
  input = 'eigen_base.i'
  csvdiff = 'eigen_coaxial_out_eigenvalues_0002.csv'
  cli_args = 'Outputs/file_base=eigen_coaxial_out BCs/active="coaxial eigen_coaxial" Mesh/fmg/file=coaxial.msh'
  requirement = 'The system shall calculate the fundamental waveguide cutoff wavenumber for a TM mode for a coaxial waveguide geometry.'
  design = 'benchmarks/WaveguideEigenvalue.md'
  verification = 'benchmarks/WaveguideEigenvalue.md'
  issues = '#21202'
[]

[time_harmonic]
  type = Exodiff
  input = 'evanescent_wave.i'
  exodiff = 'evanescent_wave_out.e'
  valgrind = heavy
  requirement = 'The system shall calculate the evanescent wave decay for a waveguide structure below the cutoff frequency.'
  design = 'benchmarks/EvanescentWave.md'
  verification = 'benchmarks/EvanescentWave.md'
  issues = '#13744'
[]

[electric]
  type = CSVDiff
  input = slab_reflection.i
  csvdiff = slab_reflection_out.csv
  requirement = 'The system shall calculate the reflection of a 1D electric field plane wave in a metal backed dielectric slab.'
  design = 'benchmarks/OneDReflection.md'
  verification = 'benchmarks/OneDReflection.md'
  issues = '#13744'
  allow_test_objects = true
[]

[test]
  type = 'Exodiff'
  input = 'waveguide2D_test.i'
  exodiff = 'waveguide2D_test_out.e'
  requirement = 'The system shall be able to simulate a 2D electric field waveguide with boundary conditions for wave launching, absorption, and conducting walls for scalar field variables.'
  design = 'ADMatReaction.md EMRobinBC.md benchmarks/WaveguideTransmission.md'
  verification = 'benchmarks/WaveguideTransmission.md'
  issues = '#21098'
  # skip test if test is being run out-of-tree. Issue Ref: #25279
  installation_type = in_tree
[]


[electrostatic_contact_analytic_solution_test_two_block]
  type = CSVDiff
  input = 'analytic_solution_test_two_block.i'
  csvdiff = 'analytic_solution_test_two_block_out.csv'
  allow_test_objects = True
  requirement = 'The system shall calculate the correct electrostatic contact potential solution when compared to an analytic result, given a one-dimensional, two-material-block scenario.'
  design = 'ElectrostaticContactCondition.md'
  verification = 'electrostatic_contact_two_block.md'
  issues = '#21096'
[]


[electrostatic_contact_analytic_solution_test_three_block]
  type = CSVDiff
  input = 'analytic_solution_test_three_block.i'
  csvdiff = 'analytic_solution_test_three_block_out.csv'
  allow_test_objects = True
  requirement = 'The system shall calculate the correct electrostatic contact potential solution when compared to an analytic result, given a one-dimensional, three-material-block scenario.'
  design = 'ElectrostaticContactCondition.md'
  verification = 'electrostatic_contact_three_block.md'
  issues = '#21096'
[]

Introduction
Dependencies
Verification
Validation