- A_elemPiecewise constant cross-sectional area of connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Piecewise constant cross-sectional area of connected flow channels
- A_linearPiecewise linear cross-sectional area of connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Piecewise linear cross-sectional area of connected flow channels
- boundaryThe list of boundary IDs from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundary IDs from the mesh where this object applies
- fluid_propertiesName of fluid properties user object
C++ Type:UserObjectName
Controllable:No
Description:Name of fluid properties user object
- junction_nameName of the junction component
C++ Type:std::string
Controllable:No
Description:Name of the junction component
- normalsFlow channel outward normals or junction inward normals
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Flow channel outward normals or junction inward normals
- numerical_fluxNumerical flux user object name
C++ Type:UserObjectName
Controllable:No
Description:Numerical flux user object name
- rhoArho*A of the connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rho*A of the connected flow channels
- rhoEArhoE*A of the connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rhoE*A of the connected flow channels
- rhouArhou*A of the connected flow channels
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:rhou*A of the connected flow channels
- schemeNONESlope reconstruction scheme
Default:NONE
C++ Type:MooseEnum
Controllable:No
Description:Slope reconstruction scheme
ADJunctionOneToOne1PhaseUserObject
Computes flux between two subdomains for 1-phase one-to-one junction
This user object is used with the JunctionOneToOne1Phase component. It computes the fluxes that are used in ADJunctionOneToOne1PhaseBC for each of the connected flow channels.
Input Parameters
- processor_idsProcessor IDs owning each connected flow channel element
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Processor IDs owning each connected flow channel element
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
Execution Scheduling Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.