SimpleTurbinePowerScalarAux

Computes turbine power for 1-phase flow for a simple on/off turbine

If the "on" parameter is true, the power is equal to "value", else it is 0.

The "on" parameter is controllable, meaning that its value can be changed dynamically during a simulation using the Controls system.

Input Parameters

  • onFalseFlag determining if turbine is operating or not

    Default:False

    C++ Type:bool

    Controllable:Yes

    Description:Flag determining if turbine is operating or not

  • valueThe value to be set to the scalar variable.

    C++ Type:double

    Unit:(no unit assumed)

    Controllable:Yes

    Description:The value to be set to the scalar variable.

  • variableThe name of the variable that this kernel operates on

    C++ Type:AuxVariableName

    Unit:(no unit assumed)

    Controllable:No

    Description:The name of the variable that this kernel operates on

Required Parameters

  • execute_onLINEARThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.

    Default:LINEAR

    C++ Type:ExecFlagEnum

    Options:NONE, INITIAL, LINEAR, LINEAR_CONVERGENCE, NONLINEAR, NONLINEAR_CONVERGENCE, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, MULTIAPP_FIXED_POINT_CONVERGENCE, FINAL, CUSTOM

    Controllable:No

    Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:Yes

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters