- complete_interface_meshThe saved mesh containing the complete boundary of each interface subdomain.
C++ Type:MeshGeneratorName
Controllable:No
Description:The saved mesh containing the complete boundary of each interface subdomain.
SBMInterfaceManager
SBMInterfaceManager detects shared interfaces in one saved surface mesh containing the complete boundary of each subdomain. It groups surface elements by subdomain ID, matches coincident faces with the same vertices between each pair, and builds a k-d tree for distance and normal queries on each detected interface. The interface meshes must therefore be conformal; partial face overlaps are not treated as complete interface elements.
The source mesh must be replicated, have dimension one less than the solving mesh, and use subdomain IDs that identify the enclosed regions. Each per-subdomain surface must use outward-facing element normals. A query for (first, second) returns the normal from the first subdomain toward the second; reversing the pair reverses that normal.
Set complete_interface_mesh to a mesh retained by a MeshGenerator with save_with_name. The tolerance parameter is relative to the largest dimension of the complete surface mesh and controls coincident-face matching. normal_tolerance controls the parallel-normal check.
The manager can be queried directly by UnsignedDistanceToSurfaceMesh, or used by the shifted cohesive zone action through its complete_interface_mesh parameter.
Detects shared interfaces between subdomains in a single surface mesh that contains the complete boundary of each subdomain, and provides distance and normal queries for each interface.
Input Parameters
- check_watertightnessFalseCheck if the mesh is watertight. If false, the mesh may not be suitable for In-Out tests.
Default:False
C++ Type:bool
Controllable:No
Description:Check if the mesh is watertight. If false, the mesh may not be suitable for In-Out tests.
- leaf_max_size10Maximum number of points in a k-d tree leaf.
Default:10
C++ Type:unsigned int
Range:leaf_max_size > 0
Controllable:No
Description:Maximum number of points in a k-d tree leaf.
- normal_tolerance0.001Tolerance for comparing unit face normals.
Default:0.001
C++ Type:Real
Unit:(no unit assumed)
Range:normal_tolerance >= 0
Controllable:No
Description:Tolerance for comparing unit face normals.
- tolerance1e-06Relative distance tolerance for matching faces, scaled by the surface mesh size.
Default:1e-06
C++ Type:Real
Unit:(no unit assumed)
Range:tolerance >= 0
Controllable:No
Description:Relative distance tolerance for matching faces, scaled by the surface mesh size.
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
Execution Scheduling Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.