MultiAppPostprocessorToAuxScalarTransfer

under construction:Undocumented Class

The MultiAppPostprocessorToAuxScalarTransfer has not been documented. The content contained on this page includes the typical automatic documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /Transfers/MultiAppPostprocessorToAuxScalarTransfer

Input Parameters

  • from_postprocessorThe name of the Postprocessor in the Master to transfer the value from.

    C++ Type:PostprocessorName

    Options:

    Description:The name of the Postprocessor in the Master to transfer the value from.

  • directionWhether this Transfer will be 'to' or 'from' a MultiApp.

    C++ Type:MooseEnum

    Options:to_multiapp from_multiapp

    Description:Whether this Transfer will be 'to' or 'from' a MultiApp.

  • multi_appThe name of the MultiApp to use.

    C++ Type:MultiAppName

    Options:

    Description:The name of the MultiApp to use.

  • to_aux_scalarThe name of the scalar Aux variable in the MultiApp to transfer the value to.

    C++ Type:VariableName

    Options:

    Description:The name of the scalar Aux variable in the MultiApp to transfer the value to.

Required Parameters

  • check_multiapp_execute_onTrueWhen false the check between the multiapp and transfer execute on flags is not preformed.

    Default:True

    C++ Type:bool

    Options:

    Description:When false the check between the multiapp and transfer execute on flags is not preformed.

  • execute_onSAME_AS_MULTIAPPThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM, SAME_AS_MULTIAPP.

    Default:SAME_AS_MULTIAPP

    C++ Type:ExecFlagEnum

    Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL CUSTOM SAME_AS_MULTIAPP

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM, SAME_AS_MULTIAPP.

  • displaced_source_meshFalseWhether or not to use the displaced mesh for the source mesh.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not to use the displaced mesh for the source mesh.

  • displaced_target_meshFalseWhether or not to use the displaced mesh for the target mesh.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not to use the displaced mesh for the target mesh.

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Options:

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Options:

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

Input Files

References