MultiAppInterpolationTransfer

The MultiAppInterpolationTransfer transfers the source variable to the nearest node on the target mesh using mesh interpolation, including the ability to utilize the displaced configuration for either or both the source and target.

Example Syntax

[Transfers]
  [./fromsub]
    type = MultiAppInterpolationTransfer
    direction = from_multiapp
    multi_app = sub
    source_variable = u
    variable = from_sub
  [../]
[]
(test/tests/transfers/multiapp_interpolation_transfer/fromsub_master.i)

Input Parameters

  • variableThe auxiliary variable to store the transferred values in.

    C++ Type:AuxVariableName

    Options:

    Description:The auxiliary variable to store the transferred values in.

  • source_variableThe variable to transfer from.

    C++ Type:VariableName

    Options:

    Description:The variable to transfer from.

  • directionWhether this Transfer will be 'to' or 'from' a MultiApp.

    C++ Type:MooseEnum

    Options:to_multiapp from_multiapp

    Description:Whether this Transfer will be 'to' or 'from' a MultiApp.

  • multi_appThe name of the MultiApp to use.

    C++ Type:MultiAppName

    Options:

    Description:The name of the MultiApp to use.

Required Parameters

  • num_points3The number of nearest points to use for interpolation.

    Default:3

    C++ Type:unsigned int

    Options:

    Description:The number of nearest points to use for interpolation.

  • interp_typeinverse_distanceThe algorithm to use for interpolation.

    Default:inverse_distance

    C++ Type:MooseEnum

    Options:inverse_distance radial_basis

    Description:The algorithm to use for interpolation.

  • power2The polynomial power to use for calculation of the decay in the interpolation.

    Default:2

    C++ Type:double

    Options:

    Description:The polynomial power to use for calculation of the decay in the interpolation.

  • check_multiapp_execute_onTrueWhen false the check between the multiapp and transfer execute on flags is not preformed.

    Default:True

    C++ Type:bool

    Options:

    Description:When false the check between the multiapp and transfer execute on flags is not preformed.

  • radius-1Radius to use for radial_basis interpolation. If negative then the radius is taken as the max distance between points.

    Default:-1

    C++ Type:double

    Options:

    Description:Radius to use for radial_basis interpolation. If negative then the radius is taken as the max distance between points.

  • execute_onSAME_AS_MULTIAPPThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM, SAME_AS_MULTIAPP.

    Default:SAME_AS_MULTIAPP

    C++ Type:ExecFlagEnum

    Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL CUSTOM SAME_AS_MULTIAPP

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM, SAME_AS_MULTIAPP.

  • displaced_source_meshFalseWhether or not to use the displaced mesh for the source mesh.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not to use the displaced mesh for the source mesh.

  • displaced_target_meshFalseWhether or not to use the displaced mesh for the target mesh.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not to use the displaced mesh for the target mesh.

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Options:

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Options:

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

Input Files