HomogenizedThermalConductivity

under construction:Undocumented Class

The HomogenizedThermalConductivity has not been documented. The content contained on this page includes the basic documentation associated with a MooseObject; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /Postprocessors/HomogenizedThermalConductivity

Input Parameters

  • variableThe name of the variable that this object operates on

    C++ Type:std::vector

    Options:

    Description:The name of the variable that this object operates on

  • componentAn integer corresponding to the direction this pp acts in (0 for x, 1 for y, 2 for z)

    C++ Type:unsigned int

    Options:

    Description:An integer corresponding to the direction this pp acts in (0 for x, 1 for y, 2 for z)

  • temp_xsolution in x

    C++ Type:std::vector

    Options:

    Description:solution in x

Required Parameters

  • scale_factor1Scale factor

    Default:1

    C++ Type:double

    Options:

    Description:Scale factor

  • temp_ysolution in y

    C++ Type:std::vector

    Options:

    Description:solution in y

  • temp_zsolution in z

    C++ Type:std::vector

    Options:

    Description:solution in z

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL CUSTOM

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

  • diffusion_coefficientthermal_conductivityProperty name of the diffusivity (Default: thermal_conductivity)

    Default:thermal_conductivity

    C++ Type:MaterialPropertyName

    Options:

    Description:Property name of the diffusivity (Default: thermal_conductivity)

  • blockThe list of block ids (SubdomainID) that this object will be applied

    C++ Type:std::vector

    Options:

    Description:The list of block ids (SubdomainID) that this object will be applied

Optional Parameters

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Options:

    Description:Set the enabled status of the MooseObject.

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Options:

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

  • outputsVector of output names were you would like to restrict the output of variables(s) associated with this object

    C++ Type:std::vector

    Options:

    Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Options:

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • seed0The seed for the master random number generator

    Default:0

    C++ Type:unsigned int

    Options:

    Description:The seed for the master random number generator

  • implicitTrueDetermines whether this object is calculated using an implicit or explicit form

    Default:True

    C++ Type:bool

    Options:

    Description:Determines whether this object is calculated using an implicit or explicit form

Advanced Parameters

Input Files

References