- PorousFlowDictatorThe UserObject that holds the list of PorousFlow variable names
C++ Type:UserObjectName
Controllable:No
Description:The UserObject that holds the list of PorousFlow variable names
- capillary_pressureName of the UserObject defining the capillary pressure
C++ Type:UserObjectName
Controllable:No
Description:Name of the UserObject defining the capillary pressure
- phase0_porepressureVariable that is the porepressure of phase 0 (the liquid phase)
C++ Type:std::vector<VariableName>
Controllable:No
Description:Variable that is the porepressure of phase 0 (the liquid phase)
- phase1_saturationVariable that is the saturation of phase 1 (the gas phase)
C++ Type:std::vector<VariableName>
Controllable:No
Description:Variable that is the saturation of phase 1 (the gas phase)
PorousFlow2PhasePS
This Material calculates the 2 porepressures and the 2 saturations in a 2-phase situation, and derivatives of these with respect to the PorousFlowVariables.
Input Parameters
- at_nodesFalseEvaluate Material properties at nodes instead of quadpoints
Default:False
C++ Type:bool
Controllable:No
Description:Evaluate Material properties at nodes instead of quadpoints
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Options:NONE, ELEMENT, SUBDOMAIN
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
Outputs Parameters
Input Files
- (modules/porous_flow/test/tests/relperm/brooks_corey2.i)
- (modules/porous_flow/test/tests/mass_conservation/mass05.i)
- (modules/porous_flow/test/tests/gravity/grav02g.i)
- (modules/porous_flow/test/tests/heat_conduction/two_phase_fv.i)
- (modules/porous_flow/test/tests/mass_conservation/mass07.i)
- (modules/porous_flow/test/tests/relperm/corey4.i)
- (modules/porous_flow/test/tests/relperm/unity.i)
- (modules/porous_flow/test/tests/hysteresis/relperm_jac_1.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
- (modules/porous_flow/examples/restart/gas_injection.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
- (modules/porous_flow/test/tests/chemistry/2species_equilibrium_2phase.i)
- (modules/porous_flow/test/tests/capillary_pressure/brooks_corey2.i)
- (modules/porous_flow/test/tests/heat_conduction/two_phase.i)
- (modules/porous_flow/test/tests/mass_conservation/mass08.i)
- (modules/porous_flow/test/tests/relperm/corey1.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_KT.i)
- (modules/porous_flow/test/tests/capillary_pressure/brooks_corey1.i)
- (modules/porous_flow/test/tests/aux_kernels/properties.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten1.i)
- (modules/porous_flow/test/tests/mass_conservation/mass10.i)
- (modules/porous_flow/test/tests/dirackernels/theis3.i)
- (modules/porous_flow/test/tests/mass_conservation/mass06.i)
- (modules/porous_flow/test/tests/relperm/corey3.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS.i)
- (modules/porous_flow/test/tests/jacobian/diff03.i)
- (modules/porous_flow/test/tests/relperm/vangenuchten1.i)
- (modules/porous_flow/examples/thm_example/2D.i)
- (modules/porous_flow/test/tests/chemistry/dissolution_limited_2phase.i)
- (modules/porous_flow/test/tests/jacobian/eff_stress04.i)
- (modules/porous_flow/examples/thm_example/2D_c.i)
- (modules/porous_flow/test/tests/chemistry/precipitation_2phase.i)
- (modules/porous_flow/test/tests/gravity/grav02e_fv.i)
- (modules/porous_flow/test/tests/jacobian/mass09.i)
- (modules/porous_flow/test/tests/hysteresis/relperm_jac.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_fv.i)
- (modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
- (modules/porous_flow/test/tests/relperm/corey2.i)
- (modules/porous_flow/test/tests/gravity/grav02e.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePS_relperm_2.i)
- (modules/porous_flow/test/tests/jacobian/diff02.i)
- (modules/porous_flow/test/tests/relperm/vangenuchten2.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten2.i)
- (modules/porous_flow/test/tests/jacobian/eff_stress02.i)
- (modules/porous_flow/test/tests/mass_conservation/mass09.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten3.i)
- (modules/porous_flow/test/tests/actions/addmaterials2.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePS_relperm.i)
- (modules/porous_flow/test/tests/jacobian/fflux07.i)
- (modules/porous_flow/test/tests/relperm/brooks_corey1.i)
- (modules/porous_flow/test/tests/gravity/grav02f.i)
- (modules/porous_flow/test/tests/actions/addmaterials.i)
(modules/porous_flow/test/tests/relperm/brooks_corey2.i)
# Test Brooks-Corey relative permeability curve by varying saturation over the mesh
# Exponent lambda = 2 for both phases
# Residual saturation of phase 0: s0r = 0.2
# Residual saturation of phase 1: s1r = 0.3
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityBC
phase = 0
lambda = 2
s_res = 0.2
sum_s_res = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityBC
phase = 1
lambda = 2
nw_phase = true
s_res = 0.3
sum_s_res = 0.5
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/mass_conservation/mass05.i)
# Checking that the mass postprocessor correctly calculates the mass
# of each component in each phase, as well as the total mass of each
# component in all phases.
# 2phase, 2component, constant porosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 0.3
[]
[massfrac_ph1_sp0]
initial_condition = 0.55
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp0_phase0_mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = 0
[]
[comp0_phase1_mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = 1
[]
[comp0_total_mass]
type = PorousFlowFluidMass
fluid_component = 0
[]
[comp0_total_mass2]
type = PorousFlowFluidMass
fluid_component = 0
phase = '0 1'
[]
[comp1_phase0_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 0
[]
[comp1_phase1_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 1
[]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
[]
[comp1_total_mass2]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-16
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mass05
csv = true
[]
(modules/porous_flow/test/tests/gravity/grav02g.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, Brooks-Corey capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Brooks-Corey relative permeabilities with residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[relpermwater]
family = MONOMIAL
order = CONSTANT
[]
[relpermgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = MaterialStdVectorAux
property = PorousFlow_relative_permeability_qp
index = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureBC
lambda = 2
pe = 1e4
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityBC
lambda = 2
phase = 0
s_res = 0.25
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
lambda = 2
phase = 1
s_res = 0.1
sum_s_res = 0.35
nw_phase = true
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_stol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-13 15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 5e3
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02g
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/heat_conduction/two_phase_fv.i)
# 2 phase heat conduction, with saturation fixed at 0.5
# Apply a boundary condition of T=300 to a bar that
# is initially at T=200, and observe the expected
# error-function response
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[phase0_porepressure]
type = MooseVariableFVReal
initial_condition = 0
[]
[phase1_saturation]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[temp]
type = MooseVariableFVReal
initial_condition = 200
[]
[]
[FVKernels]
[dummy_p0]
type = FVTimeKernel
variable = phase0_porepressure
[]
[dummy_s1]
type = FVTimeKernel
variable = phase1_saturation
[]
[energy_dot]
type = FVPorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_conduction]
type = FVPorousFlowHeatConduction
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp phase0_porepressure phase1_saturation'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 0.4
thermal_expansion = 0
cv = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.3
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
temperature = temp
[]
[thermal_conductivity]
type = ADPorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.3 0 0 0 0 0 0 0 0'
wet_thermal_conductivity = '1.7 0 0 0 0 0 0 0 0'
exponent = 1.0
aqueous_phase_number = 1
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = phase0_porepressure
phase1_saturation = phase1_saturation
capillary_pressure = pc
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.8
[]
[rock_heat]
type = ADPorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 0.25
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
boundary = left
value = 300
variable = temp
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E1
end_time = 1E2
[]
[Postprocessors]
[t005]
type = PointValue
variable = temp
point = '5 0 0'
execute_on = 'initial timestep_end'
[]
[t015]
type = PointValue
variable = temp
point = '15 0 0'
execute_on = 'initial timestep_end'
[]
[t025]
type = PointValue
variable = temp
point = '25 0 0'
execute_on = 'initial timestep_end'
[]
[t035]
type = PointValue
variable = temp
point = '35 0 0'
execute_on = 'initial timestep_end'
[]
[t045]
type = PointValue
variable = temp
point = '45 0 0'
execute_on = 'initial timestep_end'
[]
[t055]
type = PointValue
variable = temp
point = '55 0 0'
execute_on = 'initial timestep_end'
[]
[t065]
type = PointValue
variable = temp
point = '65 0 0'
execute_on = 'initial timestep_end'
[]
[t075]
type = PointValue
variable = temp
point = '75 0 0'
execute_on = 'initial timestep_end'
[]
[t085]
type = PointValue
variable = temp
point = '85 0 0'
execute_on = 'initial timestep_end'
[]
[t095]
type = PointValue
variable = temp
point = '95 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = two_phase_fv
csv = true
[]
(modules/porous_flow/test/tests/mass_conservation/mass07.i)
# Checking that the mass postprocessor throws the correct error if
# too many phases are supplied
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/relperm/corey4.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Residual saturation of phase 0: s0r = 0.2
# Residual saturation of phase 1: s1r = 0.3
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
family = LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
scaling = 0.1
phase = 0
n = 2
s_res = 0.2
sum_s_res = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
scaling = 10.0
phase = 1
n = 2
s_res = 0.3
sum_s_res = 0.5
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/relperm/unity.i)
# Test perfectly mobile relative permeability curve by varying saturation over the mesh
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[kr1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/hysteresis/relperm_jac_1.i)
# Test of derivatives computed in PorousFlowHystereticRelativePermeability classes along first-order curve
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
initial_order = 1
previous_turning_points = 0.3
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e9
log_extension = true
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG2
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/restart/gas_injection.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, where the mesh used is identical to the mesh used in gravityeq.i, we can use
# the basic restart capability by simply setting the initial condition for porepressure
# using the results from gravityeq.i.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we shift the mesh 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Results can be improved by uniformly refining the initial mesh.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
uniform_refine = 1
[file]
type = FileMeshGenerator
file = gravityeq_out.e
[]
[translate]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0.1 0 0'
input = file
[]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
initial_from_file_var = porepressure
[]
[sat_gas]
initial_condition = 0
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-10/area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedBicubicFluidProperties
fp = methane
save_file = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
checkpoint = true
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e6
log_extension = false
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/chemistry/2species_equilibrium_2phase.i)
# Using a two-phase system (see 2species_equilibrium for the single-phase)
# The saturations, porosity, mass fractions, tortuosity and diffusion coefficients are chosen so that the results are identical to 2species_equilibrium
#
# PorousFlow analogy of chemical_reactions/test/tests/aqueous_equilibrium/2species.i
#
# Simple equilibrium reaction example to illustrate the use of PorousFlowMassFractionAqueousEquilibriumChemistry
#
# In this example, two primary species a and b are transported by diffusion and convection
# from the left of the porous medium, reacting to form two equilibrium species pa2 and pab
# according to the equilibrium reaction:
#
# reactions = '2a = pa2 rate = 10^2
# a + b = pab rate = 10^-2'
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
[]
[Variables]
[a]
order = FIRST
family = LAGRANGE
[InitialCondition]
type = BoundingBoxIC
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 1
inside = 1.0e-2
outside = 1.0e-10
[]
[]
[b]
order = FIRST
family = LAGRANGE
[InitialCondition]
type = BoundingBoxIC
x1 = 0.0
y1 = 0.0
x2 = 1.0e-10
y2 = 1
inside = 1.0e-2
outside = 1.0e-10
[]
[]
[]
[AuxVariables]
[eqm_k0]
initial_condition = 1E2
[]
[eqm_k1]
initial_condition = 1E-2
[]
[pressure0]
[]
[saturation1]
initial_condition = 0.25
[]
[a_in_phase0]
initial_condition = 0.0
[]
[b_in_phase0]
initial_condition = 0.0
[]
[pa2]
family = MONOMIAL
order = CONSTANT
[]
[pab]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[pa2]
type = PorousFlowPropertyAux
property = secondary_concentration
secondary_species = 0
variable = pa2
[]
[pab]
type = PorousFlowPropertyAux
property = secondary_concentration
secondary_species = 1
variable = pab
[]
[]
[ICs]
[pressure0]
type = FunctionIC
variable = pressure0
function = 2-x
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Kernels]
[mass_a]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = a
[]
[flux_a]
type = PorousFlowAdvectiveFlux
variable = a
fluid_component = 0
[]
[diff_a]
type = PorousFlowDispersiveFlux
variable = a
fluid_component = 0
disp_trans = '0 0'
disp_long = '0 0'
[]
[mass_b]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = b
[]
[flux_b]
type = PorousFlowAdvectiveFlux
variable = b
fluid_component = 1
[]
[diff_b]
type = PorousFlowDispersiveFlux
variable = b
fluid_component = 1
disp_trans = '0 0'
disp_long = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'a b'
number_fluid_phases = 2
number_fluid_components = 3
number_aqueous_equilibrium = 2
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9 # huge, so mimic chemical_reactions
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pressure0
phase1_saturation = saturation1
[]
[massfrac]
type = PorousFlowMassFractionAqueousEquilibriumChemistry
mass_fraction_vars = 'a_in_phase0 b_in_phase0 a b'
num_reactions = 2
equilibrium_constants = 'eqm_k0 eqm_k1'
primary_activity_coefficients = '1 1'
secondary_activity_coefficients = '1 1'
reactions = '2 0
1 1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.8
[]
[permeability]
type = PorousFlowPermeabilityConst
# porous_flow permeability / porous_flow viscosity = chemical_reactions conductivity = 1E-4
permeability = '1E-7 0 0 0 1E-7 0 0 0 1E-7'
[]
[relp0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[relp1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[diff]
type = PorousFlowDiffusivityConst
# porous_flow diffusion_coeff * tortuousity * porosity = chemical_reactions diffusivity = 1E-4
diffusion_coeff = '5E-4 5E-4 5E-4
5E-4 5E-4 5E-4'
tortuosity = '0.25 0.25'
[]
[]
[BCs]
[a_left]
type = DirichletBC
variable = a
boundary = left
value = 1.0e-2
[]
[b_left]
type = DirichletBC
variable = b
boundary = left
value = 1.0e-2
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 10
end_time = 100
[]
[Outputs]
print_linear_residuals = true
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/capillary_pressure/brooks_corey2.i)
# Test Brooks-Corey capillary pressure curve by varying saturation over the mesh
# lambda = 2, sat_lr = 0.1, log_extension = true
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureBC
lambda = 2
log_extension = true
pe = 1e5
sat_lr = 0.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/heat_conduction/two_phase.i)
# 2phase heat conduction, with saturation fixed at 0.5
# apply a boundary condition of T=300 to a bar that
# is initially at T=200, and observe the expected
# error-function response
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[phase0_porepressure]
initial_condition = 0
[]
[phase1_saturation]
initial_condition = 0.5
[]
[temp]
initial_condition = 200
[]
[]
[Kernels]
[dummy_p0]
type = TimeDerivative
variable = phase0_porepressure
[]
[dummy_s1]
type = TimeDerivative
variable = phase1_saturation
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_conduction]
type = PorousFlowHeatConduction
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp phase0_porepressure phase1_saturation'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 0.4
thermal_expansion = 0
cv = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.3
thermal_expansion = 0
cv = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.3 0 0 0 0 0 0 0 0'
wet_thermal_conductivity = '1.7 0 0 0 0 0 0 0 0'
exponent = 1.0
aqueous_phase_number = 1
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = phase0_porepressure
phase1_saturation = phase1_saturation
capillary_pressure = pc
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.8
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 0.25
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 300
variable = temp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E1
end_time = 1E2
[]
[Postprocessors]
[t000]
type = PointValue
variable = temp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[t010]
type = PointValue
variable = temp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[t020]
type = PointValue
variable = temp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[t030]
type = PointValue
variable = temp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[t040]
type = PointValue
variable = temp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[t050]
type = PointValue
variable = temp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[t060]
type = PointValue
variable = temp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[t070]
type = PointValue
variable = temp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[t080]
type = PointValue
variable = temp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[t090]
type = PointValue
variable = temp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[t100]
type = PointValue
variable = temp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = two_phase
[csv]
type = CSV
[]
exodus = false
[]
(modules/porous_flow/test/tests/mass_conservation/mass08.i)
# Checking that the mass postprocessor throws the correct error when a given phase index
# is too large
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 2
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/relperm/corey1.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Corey exponent n = 1 for both phases (linear residual saturation)
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 1
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 1
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_KT.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
# Using KT stabilization
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass_component0]
type = PorousFlowMassTimeDerivative
variable = ppwater
fluid_component = 0
[]
[flux_component0_phase0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = afc_component0_phase0
[]
[flux_component0_phase1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = afc_component0_phase1
[]
[mass_component1]
type = PorousFlowMassTimeDerivative
variable = sgas
fluid_component = 1
[]
[flux_component1_phase0]
type = PorousFlowFluxLimitedTVDAdvection
variable = sgas
advective_flux_calculator = afc_component1_phase0
[]
[flux_component1_phase1]
type = PorousFlowFluxLimitedTVDAdvection
variable = sgas
advective_flux_calculator = afc_component1_phase1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[afc_component0_phase0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 0
phase = 0
flux_limiter_type = superbee
[]
[afc_component0_phase1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 0
phase = 1
flux_limiter_type = superbee
[]
[afc_component1_phase0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 1
phase = 0
flux_limiter_type = superbee
[]
[afc_component1_phase1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
fluid_component = 1
phase = 1
flux_limiter_type = superbee
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS_KT
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/capillary_pressure/brooks_corey1.i)
# Test Brooks-Corey capillary pressure curve by varying saturation over the mesh
# lambda = 2, sat_lr = 0.1, log_extension = false
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureBC
lambda = 2
log_extension = false
pe = 1e5
sat_lr = 0.1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/aux_kernels/properties.i)
# Example of accessing properties using the PorousFlowPropertyAux AuxKernel for
# each phase and fluid component (as required).
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0_water]
order = FIRST
family = LAGRANGE
initial_condition = 0.1
[]
[x0_gas]
order = FIRST
family = LAGRANGE
initial_condition = 0.8
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[capillary_pressure]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[relperm_water]
order = CONSTANT
family = MONOMIAL
[]
[relperm_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[energy_water]
order = CONSTANT
family = MONOMIAL
[]
[energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[capillary_pressure]
type = PorousFlowPropertyAux
variable = capillary_pressure
property = capillary_pressure
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[relperm_water]
type = PorousFlowPropertyAux
variable = relperm_water
property = relperm
phase = 0
execute_on = timestep_end
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[energy_water]
type = PorousFlowPropertyAux
variable = energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[energy_gas]
type = PorousFlowPropertyAux
variable = energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0_water x0_gas'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten1.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
log_extension = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/mass_conservation/mass10.i)
# Checking that the mass postprocessor throws the correct error when kernel_variable_numer is illegal
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
kernel_variable_number = 2
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/dirackernels/theis3.i)
# Two phase Theis problem: Flow from single source
# Constant rate injection 0.5 kg/s
# 1D cylindrical mesh
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmax = 2000
bias_x = 1.05
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 20e6
[]
[sgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-4
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[rightwater]
type = DirichletBC
boundary = right
value = 20e6
variable = ppwater
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 0.5
variable = sgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-8 1E-10 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e4
[TimeStepper]
type = IterationAdaptiveDT
dt = 10
growth_factor = 2
[]
[]
[VectorPostprocessors]
[line]
type = NodalValueSampler
sort_by = x
variable = 'ppwater sgas'
execute_on = 'timestep_end'
[]
[]
[Postprocessors]
[ppwater]
type = PointValue
point = '4 0 0'
variable = ppwater
[]
[sgas]
type = PointValue
point = '4 0 0'
variable = sgas
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
[]
[]
[Outputs]
file_base = theis3
print_linear_residuals = false
perf_graph = true
[csv]
type = CSV
execute_on = timestep_end
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/mass_conservation/mass06.i)
# Checking that the mass postprocessor correctly calculates the mass
# of each component in each phase, as well as the total mass of each
# component in all phases. Also tests that optional saturation threshold
# gives the correct mass
# 2phase, 2component, constant porosity
# saturation_threshold set to 0.6 for phase 1
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp0_phase0_mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = 0
[]
[comp0_phase1_mass]
type = PorousFlowFluidMass
fluid_component = 0
phase = 1
[]
[comp0_total_mass]
type = PorousFlowFluidMass
fluid_component = 0
[]
[comp1_phase0_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 0
[]
[comp1_phase1_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 1
[]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
[]
[comp1_phase1_threshold_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 1
saturation_threshold = 0.6
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-16
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mass06
csv = true
[]
(modules/porous_flow/test/tests/relperm/corey3.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Residual saturation of phase 0: s0r = 0.2
# Residual saturation of phase 1: s1r = 0.3
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
family = LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
s_res = 0.2
sum_s_res = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
s_res = 0.3
sum_s_res = 0.5
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
family = MONOMIAL
order = FIRST
initial_condition = 1
[]
[massfrac_ph1_sp0]
family = MONOMIAL
order = FIRST
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
warn_discontinuous_face_values = false
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/diff03.i)
# Test the Jacobian of the diffusive component of the PorousFlowDisperiveFlux kernel for two phases.
# By setting disp_long and disp_trans to zero, the purely diffusive component of the flux
# can be isolated. Uses saturation-dependent tortuosity and diffusion coefficients from the
# Millington-Quirk model
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[sgas]
[]
[massfrac0]
[]
[]
[AuxVariables]
[massfrac1]
[]
[]
[ICs]
[sgas]
type = RandomIC
variable = sgas
max = 1
min = 0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = sgas
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'sgas massfrac0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 1
thermal_expansion = 0
viscosity = 0.1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = 1
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityMillingtonQuirk
diffusion_coeff = '1e-2 1e-1 1e-2 1e-1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/relperm/vangenuchten1.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityVG
phase = 1
m = 0.5
wetting = false
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-7
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/examples/thm_example/2D.i)
# Two phase, temperature-dependent, with mechanics, radial with fine mesh, constant injection of cold co2 into a overburden-reservoir-underburden containing mostly water
# species=0 is water
# species=1 is co2
# phase=0 is liquid, and since massfrac_ph0_sp0 = 1, this is all water
# phase=1 is gas, and since massfrac_ph1_sp0 = 0, this is all co2
#
# The mesh used below has very high resolution, so the simulation takes a long time to complete.
# Some suggested meshes of different resolution:
# nx=50, bias_x=1.2
# nx=100, bias_x=1.1
# nx=200, bias_x=1.05
# nx=400, bias_x=1.02
# nx=1000, bias_x=1.01
# nx=2000, bias_x=1.003
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2000
bias_x = 1.003
xmin = 0.1
xmax = 5000
ny = 1
ymin = 0
ymax = 11
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
gravity = '0 0 0'
biot_coefficient = 1.0
[]
[Variables]
[pwater]
initial_condition = 18.3e6
[]
[sgas]
initial_condition = 0.0
[]
[temp]
initial_condition = 358
[]
[disp_r]
[]
[]
[AuxVariables]
[rate]
[]
[disp_z]
[]
[massfrac_ph0_sp0]
initial_condition = 1 # all H20 in phase=0
[]
[massfrac_ph1_sp0]
initial_condition = 0 # no H2O in phase=1
[]
[pgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = temp
[]
[conduction]
type = PorousFlowExponentialDecay
use_displaced_mesh = false
variable = temp
reference = 358
rate = rate
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = temp
eigenstrain_names = thermal_contribution
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxKernels]
[rate]
type = FunctionAux
variable = rate
execute_on = timestep_begin
function = decay_rate
[]
[pgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[]
[Functions]
[decay_rate]
# Eqn(26) of the first paper of LaForce et al.
# Ka * (rho C)_a = 10056886.914
# h = 11
type = ParsedFunction
expression = 'sqrt(10056886.914/t)/11.0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pwater sgas disp_r'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 970.0
viscosity = 0.3394e-3
cv = 4149.0
cp = 4149.0
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[co2]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 516.48
viscosity = 0.0393e-3
cv = 2920.5
cp = 2920.5
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[gas]
type = PorousFlowSingleComponentFluid
fp = co2
phase = 1
[]
[porosity_reservoir]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability_reservoir]
type = PorousFlowPermeabilityConst
permeability = '2e-12 0 0 0 0 0 0 0 0'
[]
[relperm_liquid]
type = PorousFlowRelativePermeabilityCorey
n = 4
phase = 0
s_res = 0.200
sum_s_res = 0.405
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
phase = 1
s_res = 0.205
sum_s_res = 0.405
nw_phase = true
lambda = 2
[]
[thermal_conductivity_reservoir]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 1.320 0 0 0 0'
wet_thermal_conductivity = '0 0 0 0 3.083 0 0 0 0'
[]
[internal_energy_reservoir]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2350.0
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 6.0E9
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution ini_stress'
[]
[ini_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '-12.8E6 0 0 0 -51.3E6 0 0 0 -12.8E6'
eigenstrain_name = ini_stress
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temp
stress_free_temperature = 358
thermal_expansion_coeff = 5E-6
eigenstrain_name = thermal_contribution
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[]
[BCs]
[outer_pressure_fixed]
type = DirichletBC
boundary = right
value = 18.3e6
variable = pwater
[]
[outer_saturation_fixed]
type = DirichletBC
boundary = right
value = 0.0
variable = sgas
[]
[outer_temp_fixed]
type = DirichletBC
boundary = right
value = 358
variable = temp
[]
[fixed_outer_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = sgas
use_mobility = false
use_relperm = false
fluid_phase = 1
flux_function = 'min(t/100.0,1)*(-2.294001475)' # 5.0E5 T/year = 15.855 kg/s, over area of 2Pi*0.1*11
[]
[cold_co2]
type = DirichletBC
boundary = left
variable = temp
value = 294
[]
[cavity_pressure_x]
type = Pressure
boundary = left
variable = disp_r
component = 0
postprocessor = p_bh # note, this lags
use_displaced_mesh = false
[]
[]
[Postprocessors]
[p_bh]
type = PointValue
variable = pwater
point = '0.1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[]
[VectorPostprocessors]
[ptsuss]
type = LineValueSampler
use_displaced_mesh = false
start_point = '0.1 0 0'
end_point = '5000 0 0'
sort_by = x
num_points = 50000
outputs = csv
variable = 'pwater temp sgas disp_r stress_rr stress_tt'
[]
[]
[Preconditioning]
active = 'smp'
[smp]
type = SMP
full = true
#petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E2 1E-5 500'
[]
[mumps]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -snes_rtol -snes_atol -snes_max_it'
petsc_options_value = 'gmres lu mumps NONZERO 1E-5 1E2 50'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1.5768e8
#dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
[]
[]
[Outputs]
print_linear_residuals = false
sync_times = '3600 86400 2.592E6 1.5768E8'
perf_graph = true
exodus = true
[csv]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/chemistry/dissolution_limited_2phase.i)
# Using a two-phase system (see dissolution_limited.i for the single-phase)
# The saturation and porosity are chosen so that the results are identical to dissolution_limited.i
#
# The dissolution reaction, with limited initial mineral concentration
#
# a <==> mineral
#
# produces "mineral". Using mineral_density = fluid_density, theta = 1 = eta, the DE is
#
# a' = -(mineral / (porosity * saturation))' = rate * surf_area * molar_vol (1 - (1 / eqm_const) * (act_coeff * a)^stoi)
#
# The following parameters are used
#
# T_ref = 0.5 K
# T = 1 K
# activation_energy = 3 J/mol
# gas_constant = 6 J/(mol K)
# kinetic_rate_at_ref_T = 0.60653 mol/(m^2 s)
# These give rate = 0.60653 * exp(1/2) = 1 mol/(m^2 s)
#
# surf_area = 0.5 m^2/L
# molar_volume = 2 L/mol
# These give rate * surf_area * molar_vol = 1 s^-1
#
# equilibrium_constant = 0.5 (dimensionless)
# primary_activity_coefficient = 2 (dimensionless)
# stoichiometry = 1 (dimensionless)
# This means that 1 - (1 / eqm_const) * (act_coeff * a)^stoi = 1 - 4 a, which is positive for a < 0.25, ie dissolution for a(t=0) < 0.25
#
# The solution of the DE is
# a = eqm_const / act_coeff + (a(t=0) - eqm_const / act_coeff) exp(-rate * surf_area * molar_vol * act_coeff * t / eqm_const)
# = 0.25 + (a(t=0) - 0.25) exp(-4 * t)
# c = c(t=0) - (a - a(t=0)) * porosity * saturation
#
# However, c(t=0) is small, so that the reaction only works until c=0, then a and c both remain fixed
#
# This test checks that (a + c / (porosity * saturation)) is time-independent, and that a follows the above solution, until c=0 and thereafter remains fixed.
#
# Aside:
# The exponential curve is not followed exactly because moose actually solves
# (a - a_old)/dt = rate * surf_area * molar_vol (1 - (1 / eqm_const) * (act_coeff * a)^stoi)
# which does not give an exponential exactly, except in the limit dt->0
[Mesh]
type = GeneratedMesh
dim = 1
[]
[Variables]
[a]
initial_condition = 0.05
[]
[]
[AuxVariables]
[eqm_k]
initial_condition = 0.5
[]
[pressure0]
[]
[saturation1]
initial_condition = 0.25
[]
[b]
initial_condition = 0.123
[]
[ini_mineral_conc]
initial_condition = 0.015
[]
[mineral]
family = MONOMIAL
order = CONSTANT
[]
[should_be_static]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[mineral]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = mineral
[]
[should_be_static]
type = ParsedAux
coupled_variables = 'mineral a'
expression = 'a + mineral / 0.1'
variable = should_be_static
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Kernels]
[mass_a]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = a
[]
[pre_dis]
type = PorousFlowPreDis
variable = a
mineral_density = 1000
stoichiometry = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = a
number_fluid_phases = 2
number_fluid_components = 2
number_aqueous_kinetic = 1
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9 # huge, so mimic chemical_reactions
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 1
[]
[ppss]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pressure0
phase1_saturation = saturation1
[]
[mass_frac]
type = PorousFlowMassFraction
mass_fraction_vars = 'b a'
[]
[predis]
type = PorousFlowAqueousPreDisChemistry
primary_concentrations = a
num_reactions = 1
equilibrium_constants = eqm_k
primary_activity_coefficients = 2
reactions = 1
specific_reactive_surface_area = 0.5
kinetic_rate_constant = 0.6065306597126334
activation_energy = 3
molar_volume = 2
gas_constant = 6
reference_temperature = 0.5
[]
[mineral_conc]
type = PorousFlowAqueousPreDisMineral
initial_concentrations = ini_mineral_conc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.4
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1E-10
dt = 0.01
end_time = 1
[]
[Postprocessors]
[a]
type = PointValue
point = '0 0 0'
variable = a
[]
[should_be_static]
type = PointValue
point = '0 0 0'
variable = should_be_static
[]
[]
[Outputs]
time_step_interval = 10
csv = true
perf_graph = true
[]
(modules/porous_flow/test/tests/jacobian/eff_stress04.i)
# 2phase (PS)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
# RZ coordinate system
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[sgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[grad0]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 0
variable = ppwater
[]
[grad1]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.01
[]
[]
[Materials]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/examples/thm_example/2D_c.i)
# Two phase, temperature-dependent, with mechanics and chemistry, radial with fine mesh, constant injection of cold co2 into a overburden-reservoir-underburden containing mostly water
# species=0 is water
# species=1 is co2
# phase=0 is liquid, and since massfrac_ph0_sp0 = 1, this is all water
# phase=1 is gas, and since massfrac_ph1_sp0 = 0, this is all co2
#
# The mesh used below has very high resolution, so the simulation takes a long time to complete.
# Some suggested meshes of different resolution:
# nx=50, bias_x=1.2
# nx=100, bias_x=1.1
# nx=200, bias_x=1.05
# nx=400, bias_x=1.02
# nx=1000, bias_x=1.01
# nx=2000, bias_x=1.003
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2000
bias_x = 1.003
xmin = 0.1
xmax = 5000
ny = 1
ymin = 0
ymax = 11
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_r disp_z'
PorousFlowDictator = dictator
gravity = '0 0 0'
biot_coefficient = 1.0
[]
[Variables]
[pwater]
initial_condition = 18.3e6
[]
[sgas]
initial_condition = 0.0
[]
[temp]
initial_condition = 358
[]
[disp_r]
[]
[]
[AuxVariables]
[rate]
[]
[disp_z]
[]
[massfrac_ph0_sp0]
initial_condition = 1 # all H20 in phase=0
[]
[massfrac_ph1_sp0]
initial_condition = 0 # no H2O in phase=1
[]
[pgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[stress_rr]
order = CONSTANT
family = MONOMIAL
[]
[stress_tt]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[mineral_conc_m3_per_m3]
family = MONOMIAL
order = CONSTANT
initial_condition = 0.1
[]
[eqm_const]
initial_condition = 0.0
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = temp
[]
[conduction]
type = PorousFlowExponentialDecay
use_displaced_mesh = false
variable = temp
reference = 358
rate = rate
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = temp
eigenstrain_names = thermal_contribution
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxKernels]
[rate]
type = FunctionAux
variable = rate
execute_on = timestep_begin
function = decay_rate
[]
[pgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[stress_rr]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_rr
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[mineral]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = mineral_conc_m3_per_m3
[]
[eqm_const_auxk]
type = ParsedAux
variable = eqm_const
coupled_variables = temp
expression = '(358 - temp) / (358 - 294)'
[]
[porosity_auxk]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
[]
[]
[Functions]
[decay_rate]
# Eqn(26) of the first paper of LaForce et al.
# Ka * (rho C)_a = 10056886.914
# h = 11
type = ParsedFunction
expression = 'sqrt(10056886.914/t)/11.0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pwater sgas disp_r'
number_fluid_phases = 2
number_fluid_components = 2
number_aqueous_kinetic = 1
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[water]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 970.0
viscosity = 0.3394e-3
cv = 4149.0
cp = 4149.0
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[co2]
type = SimpleFluidProperties
bulk_modulus = 2.27e14
density0 = 516.48
viscosity = 0.0393e-3
cv = 2920.5
cp = 2920.5
porepressure_coefficient = 0.0
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
[]
[gas]
type = PorousFlowSingleComponentFluid
fp = co2
phase = 1
[]
[porosity_reservoir]
type = PorousFlowPorosity
porosity_zero = 0.2
chemical = true
reference_chemistry = 0.1
initial_mineral_concentrations = 0.1
[]
[permeability_reservoir]
type = PorousFlowPermeabilityConst
permeability = '2e-12 0 0 0 0 0 0 0 0'
[]
[relperm_liquid]
type = PorousFlowRelativePermeabilityCorey
n = 4
phase = 0
s_res = 0.200
sum_s_res = 0.405
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
phase = 1
s_res = 0.205
sum_s_res = 0.405
nw_phase = true
lambda = 2
[]
[thermal_conductivity_reservoir]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0 0 0 0 1.320 0 0 0 0'
wet_thermal_conductivity = '0 0 0 0 3.083 0 0 0 0'
[]
[internal_energy_reservoir]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2350.0
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 6.0E9
poissons_ratio = 0.2
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution ini_stress'
[]
[ini_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '-12.8E6 0 0 0 -51.3E6 0 0 0 -12.8E6'
eigenstrain_name = ini_stress
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = temp
stress_free_temperature = 358
thermal_expansion_coeff = 5E-6
eigenstrain_name = thermal_contribution
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[predis]
type = PorousFlowAqueousPreDisChemistry
num_reactions = 1
primary_concentrations = 1.0 # fixed activity
equilibrium_constants_as_log10 = true
equilibrium_constants = eqm_const
primary_activity_coefficients = 1.0 # fixed activity
reactions = 1
kinetic_rate_constant = 1E-6
molar_volume = 1.0
specific_reactive_surface_area = 1.0
activation_energy = 0.0 # no Arrhenius
[]
[mineral_conc]
type = PorousFlowAqueousPreDisMineral
initial_concentrations = 0.1
[]
[predis_nodes]
type = PorousFlowAqueousPreDisChemistry
at_nodes = true
num_reactions = 1
primary_concentrations = 1.0 # fixed activity
equilibrium_constants_as_log10 = true
equilibrium_constants = eqm_const
primary_activity_coefficients = 1.0 # fixed activity
reactions = 1
kinetic_rate_constant = 1E-6
molar_volume = 1.0
specific_reactive_surface_area = 1.0
activation_energy = 0.0 # no Arrhenius
[]
[mineral_conc_nodes]
type = PorousFlowAqueousPreDisMineral
at_nodes = true
initial_concentrations = 0.1
[]
[]
[BCs]
[outer_pressure_fixed]
type = DirichletBC
boundary = right
value = 18.3e6
variable = pwater
[]
[outer_saturation_fixed]
type = DirichletBC
boundary = right
value = 0.0
variable = sgas
[]
[outer_temp_fixed]
type = DirichletBC
boundary = right
value = 358
variable = temp
[]
[fixed_outer_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = right
[]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = sgas
use_mobility = false
use_relperm = false
fluid_phase = 1
flux_function = 'min(t/100.0,1)*(-2.294001475)' # 5.0E5 T/year = 15.855 kg/s, over area of 2Pi*0.1*11
[]
[cold_co2]
type = DirichletBC
boundary = left
variable = temp
value = 294
[]
[cavity_pressure_x]
type = Pressure
boundary = left
variable = disp_r
component = 0
postprocessor = p_bh # note, this lags
use_displaced_mesh = false
[]
[]
[Postprocessors]
[p_bh]
type = PointValue
variable = pwater
point = '0.1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[mineral_bh] # mineral concentration (m^3(mineral)/m^3(rock)) at the borehole
type = PointValue
variable = mineral_conc_m3_per_m3
point = '0.1 0 0'
use_displaced_mesh = false
[]
[]
[VectorPostprocessors]
[ptsuss]
type = LineValueSampler
use_displaced_mesh = false
start_point = '0.1 0 0'
end_point = '5000 0 0'
sort_by = x
num_points = 50000
outputs = csv
variable = 'pwater temp sgas disp_r stress_rr stress_tt mineral_conc_m3_per_m3 porosity'
[]
[]
[Preconditioning]
active = 'smp'
[smp]
type = SMP
full = true
#petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E2 1E-5 50'
[]
[mumps]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -snes_rtol -snes_atol -snes_max_it'
petsc_options_value = 'gmres lu mumps NONZERO 1E-5 1E2 50'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1.5768e8
#dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1
growth_factor = 1.1
[]
[]
[Outputs]
print_linear_residuals = false
sync_times = '3600 86400 2.592E6 1.5768E8'
perf_graph = true
exodus = true
[csv]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/chemistry/precipitation_2phase.i)
# Using a two-phase system (see precipitation.i for the single-phase)
# The saturation and porosity are chosen so that the results are identical to precipitation.i
#
# The precipitation reaction
#
# a <==> mineral
#
# produces "mineral". Using mineral_density = fluid_density, theta = 1 = eta, the DE is
#
# a' = -(mineral / (porosity * saturation))' = rate * surf_area * molar_vol (1 - (1 / eqm_const) * (act_coeff * a)^stoi)
#
# The following parameters are used
#
# T_ref = 0.5 K
# T = 1 K
# activation_energy = 3 J/mol
# gas_constant = 6 J/(mol K)
# kinetic_rate_at_ref_T = 0.60653 mol/(m^2 s)
# These give rate = 0.60653 * exp(1/2) = 1 mol/(m^2 s)
#
# surf_area = 0.5 m^2/L
# molar_volume = 2 L/mol
# These give rate * surf_area * molar_vol = 1 s^-1
#
# equilibrium_constant = 0.5 (dimensionless)
# primary_activity_coefficient = 2 (dimensionless)
# stoichiometry = 1 (dimensionless)
# This means that 1 - (1 / eqm_const) * (act_coeff * a)^stoi = 1 - 4 a, which is negative for a > 0.25, ie precipitation for a(t=0) > 0.25
#
# The solution of the DE is
# a = eqm_const / act_coeff + (a(t=0) - eqm_const / act_coeff) exp(-rate * surf_area * molar_vol * act_coeff * t / eqm_const)
# = 0.25 + (a(t=0) - 0.25) exp(-4 * t)
# c = c(t=0) - (a - a(t=0)) * (porosity * saturation)
#
# This test checks that (a + c / (porosity * saturation)) is time-independent, and that a follows the above solution
#
# Aside:
# The exponential curve is not followed exactly because moose actually solves
# (a - a_old)/dt = rate * surf_area * molar_vol (1 - (1 / eqm_const) * (act_coeff * a)^stoi)
# which does not give an exponential exactly, except in the limit dt->0
[Mesh]
type = GeneratedMesh
dim = 1
[]
[Variables]
[a]
initial_condition = 0.9
[]
[]
[AuxVariables]
[eqm_k]
initial_condition = 0.5
[]
[pressure0]
[]
[saturation1]
initial_condition = 0.25
[]
[b]
initial_condition = 0.123
[]
[ini_mineral_conc]
initial_condition = 0.2
[]
[mineral]
family = MONOMIAL
order = CONSTANT
[]
[should_be_static]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[mineral]
type = PorousFlowPropertyAux
property = mineral_concentration
mineral_species = 0
variable = mineral
[]
[should_be_static]
type = ParsedAux
coupled_variables = 'mineral a'
expression = 'a + mineral / 0.1'
variable = should_be_static
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Kernels]
[mass_a]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = a
[]
[pre_dis]
type = PorousFlowPreDis
variable = a
mineral_density = 1000
stoichiometry = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = a
number_fluid_phases = 2
number_fluid_components = 2
number_aqueous_kinetic = 1
aqueous_phase_number = 1
[]
[pc]
type = PorousFlowCapillaryPressureConst
[]
[]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9 # huge, so mimic chemical_reactions
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 1
[]
[ppss]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pressure0
phase1_saturation = saturation1
[]
[mass_frac]
type = PorousFlowMassFraction
mass_fraction_vars = 'b a'
[]
[predis]
type = PorousFlowAqueousPreDisChemistry
primary_concentrations = a
num_reactions = 1
equilibrium_constants = eqm_k
primary_activity_coefficients = 2
reactions = 1
specific_reactive_surface_area = 0.5
kinetic_rate_constant = 0.6065306597126334
activation_energy = 3
molar_volume = 2
gas_constant = 6
reference_temperature = 0.5
[]
[mineral_conc]
type = PorousFlowAqueousPreDisMineral
initial_concentrations = ini_mineral_conc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.4
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1E-10
dt = 0.01
end_time = 1
[]
[Postprocessors]
[a]
type = PointValue
point = '0 0 0'
variable = a
[]
[should_be_static]
type = PointValue
point = '0 0 0'
variable = should_be_static
[]
[]
[Outputs]
time_step_interval = 10
csv = true
perf_graph = true
[]
(modules/porous_flow/test/tests/gravity/grav02e_fv.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, constant capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with no residual saturation
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-10 0 0'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 1.5e6
[]
[sgas]
type = MooseVariableFVReal
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[ppgas]
type = MooseVariableFVReal
[]
[swater]
type = MooseVariableFVReal
[]
[relpermwater]
type = MooseVariableFVReal
[]
[relpermgas]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = ADPorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
execute_on = 'initial timestep_end'
[]
[swater]
type = ADPorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
execute_on = 'initial timestep_end'
[]
[relpermwater]
type = ADPorousFlowPropertyAux
property = relperm
phase = 0
variable = relpermwater
execute_on = 'initial timestep_end'
[]
[relpermgas]
type = ADPorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
execute_on = 'initial timestep_end'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[VectorPostprocessors]
[vars]
type = ElementValueSampler
variable = 'ppgas ppwater sgas swater'
sort_by = x
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 5e3
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e3
[]
[]
[Outputs]
execute_on = 'final'
perf_graph = true
csv = true
[]
(modules/porous_flow/test/tests/jacobian/mass09.i)
# 2phase (PS)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[sgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[mass_sp0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[mass_sp1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.1
log_extension = false
s_scale = 0.9
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/hysteresis/relperm_jac.i)
# Test of derivatives computed in PorousFlowHystereticRelativePermeability classes along zeroth-order curve
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePS_fv.i)
# Pressure pulse in 1D with 2 phases, 2components - transient using FV
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
type = MooseVariableFVReal
initial_condition = 2e6
[]
[sgas]
type = MooseVariableFVReal
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
type = MooseVariableFVReal
initial_condition = 1
[]
[massfrac_ph1_sp0]
type = MooseVariableFVReal
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[FVKernels]
[mass0]
type = FVPorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = FVPorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = FVPorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = FVPorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = ADPorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[Materials]
[temperature]
type = ADPorousFlowTemperature
[]
[ppss]
type = ADPorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = ADPorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = ADPorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = ADPorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = ADPorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = ADPorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[FVBCs]
[leftwater]
type = FVDirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = FVDirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[sgas]
type = FVDirichletBC
boundary = 'left right'
value = 0.3
variable = sgas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = ElementValueSampler
sort_by = x
variable = 'ppwater ppgas'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePS_fv
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
exodus = true
[]
(modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, the mesh is not identical to the mesh used in gravityeq.i. Rather, it is
# generated so that it is more refined near the injection boundary and at the top of
# the model, as that is where the gas plume will be present.
#
# To use the hydrostatic pressure calculated using the gravity equilibrium run as the initial
# condition for the pressure, a SolutionUserObject is used, along with a SolutionFunction to
# interpolate the pressure from the gravity equilibrium run to the initial condition for liqiud
# porepressure in this example.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we use a mesh shifted 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
type = GeneratedMesh
dim = 2
ny = 25
nx = 50
ymax = 100
xmin = 0.1
xmax = 5000
bias_x = 1.05
bias_y = 0.95
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
[]
[sat_gas]
initial_condition = 0
[]
[]
[ICs]
[ppliq_ic]
type = FunctionIC
variable = pp_liq
function = ppliq_ic
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
use_relperm = true
mass_fraction_component = 0
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
symbol_values = injection_area
symbol_names = area
expression = '-1/area'
[]
[ppliq_ic]
type = SolutionFunction
solution = soln
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
pc_max = 1e7
[]
[soln]
type = SolutionUserObject
mesh = gravityeq_out.e
system_variables = porepressure
[]
[]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedBicubicFluidProperties
fp = methane
save_file = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 5e-14 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
growth_factor = 1.5
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/relperm/corey2.i)
# Test Corey relative permeability curve by varying saturation over the mesh
# Corey exponent n = 2 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
family = LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/gravity/grav02e.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, constant capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with no residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[swater]
family = MONOMIAL
order = FIRST
[]
[relpermwater]
family = MONOMIAL
order = FIRST
[]
[relpermgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 1e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02e
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/hysteresis/2phasePS_relperm_2.i)
# Simple example of a 2-phase situation with hysteretic relative permeability. Gas is added to and removed from the system in order to observe the hysteresis
# All liquid water exists in component 0
# All gas exists in component 1
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[]
[DiracKernels]
[pump]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = flux
point = '0.5 0 0'
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[sat0]
family = MONOMIAL
order = CONSTANT
[]
[pp1]
family = MONOMIAL
order = CONSTANT
[]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[relperm_liquid]
family = MONOMIAL
order = CONSTANT
[]
[relperm_gas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat0]
type = PorousFlowPropertyAux
variable = sat0
phase = 0
property = saturation
[]
[relperm_liquid]
type = PorousFlowPropertyAux
variable = relperm_liquid
property = relperm
phase = 0
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
[]
[pp1]
type = PorousFlowPropertyAux
variable = pp1
phase = 1
property = pressure
[]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[]
[FluidProperties]
[simple_fluid] # same properties used for both phases
type = SimpleFluidProperties
bulk_modulus = 10 # so pumping does not result in excessive porepressure
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.4
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.4
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 1.0
gas_low_extension_type = linear_like
[]
[]
[Postprocessors]
[flux]
type = FunctionValuePostprocessor
function = 'if(t <= 15, 20, -20)'
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[sat0]
type = PointValue
point = '0 0 0'
variable = sat0
[]
[sat1]
type = PointValue
point = '0 0 0'
variable = sat1
[]
[kr_liq]
type = PointValue
point = '0 0 0'
variable = relperm_liquid
[]
[kr_gas]
type = PointValue
point = '0 0 0'
variable = relperm_gas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = ' lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 5
end_time = 29
nl_abs_tol = 1E-10
[]
[Outputs]
[csv]
type = CSV
sync_times = '0 1 2 3 8 12 13 14 15 16 17 18 20 24 25 26 27 28 29'
sync_only = true
file_base = '2phasePS_relperm_2_none'
[]
[]
(modules/porous_flow/test/tests/jacobian/diff02.i)
# Test the Jacobian of the diffusive component of the PorousFlowDisperiveFlux kernel for two phases.
# By setting disp_long and disp_trans to zero, the purely diffusive component of the flux
# can be isolated. Uses constant tortuosity and diffusion coefficients
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[sgas]
[]
[massfrac0]
[]
[]
[AuxVariables]
[massfrac1]
[]
[]
[ICs]
[sgas]
type = RandomIC
variable = sgas
max = 1
min = 0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 1
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 1
[]
[]
[Kernels]
[diff0]
type = PorousFlowDispersiveFlux
fluid_component = 0
variable = sgas
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[diff1]
type = PorousFlowDispersiveFlux
fluid_component = 1
variable = massfrac0
gravity = '1 0 0'
disp_long = '0 0'
disp_trans = '0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'sgas massfrac0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 10
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e7
density0 = 1
thermal_expansion = 0
viscosity = 0.1
[]
[]
[Materials]
[temp]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = 1
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[poro]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[diff]
type = PorousFlowDiffusivityConst
diffusion_coeff = '1e-2 1e-1 1e-2 1e-1'
tortuosity = '0.1 0.2'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityConst
phase = 1
[]
[]
[Preconditioning]
active = smp
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/relperm/vangenuchten2.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.4 for both phases
# Phase 0 residual saturation s0r = 0.1
# Phase 1 residual saturation s1r = 0.2
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.4
s_res = 0.1
sum_s_res = 0.3
[]
[kr1]
type = PorousFlowRelativePermeabilityVG
phase = 1
m = 0.4
s_res = 0.2
sum_s_res = 0.3
wetting = false
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-7
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten2.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
log_extension = true
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/eff_stress02.i)
# 2phase (PS)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[sgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[grad0]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 0
variable = ppwater
[]
[grad1]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.01
[]
[]
[Materials]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/mass_conservation/mass09.i)
# Checking that the mass postprocessor throws the correct error when more than a single
# phase index is given when using the saturation_threshold parameter
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
saturation_threshold = 0.5
phase = '0 1'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten3.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
s_scale = 0.8
log_extension = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/actions/addmaterials2.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# the at_nodes parameter isn't provided. In this case, only a single material
# is given, and the action must correctly identify if materials should be added
# at the nodes, qps, or even both
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/hysteresis/2phasePS_relperm.i)
# Simple example of a 2-phase situation with hysteretic relative permeability. Gas is added to and removed from the system in order to observe the hysteresis
# All liquid water exists in component 0
# All gas exists in component 1
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[]
[DiracKernels]
[pump]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = flux
point = '0.5 0 0'
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[sat0]
family = MONOMIAL
order = CONSTANT
[]
[pp1]
family = MONOMIAL
order = CONSTANT
[]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[relperm_liquid]
family = MONOMIAL
order = CONSTANT
[]
[relperm_gas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat0]
type = PorousFlowPropertyAux
variable = sat0
phase = 0
property = saturation
[]
[relperm_liquid]
type = PorousFlowPropertyAux
variable = relperm_liquid
property = relperm
phase = 0
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
[]
[pp1]
type = PorousFlowPropertyAux
variable = pp1
phase = 1
property = pressure
[]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[]
[FluidProperties]
[simple_fluid] # same properties used for both phases
type = SimpleFluidProperties
bulk_modulus = 10 # so pumping does not result in excessive porepressure
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Postprocessors]
[flux]
type = FunctionValuePostprocessor
function = 'if(t <= 9, 10, -10)'
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[sat0]
type = PointValue
point = '0 0 0'
variable = sat0
[]
[sat1]
type = PointValue
point = '0 0 0'
variable = sat1
[]
[kr_liq]
type = PointValue
point = '0 0 0'
variable = relperm_liquid
[]
[kr_gas]
type = PointValue
point = '0 0 0'
variable = relperm_gas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = ' lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.5
end_time = 18
nl_abs_tol = 1E-10
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/jacobian/fflux07.i)
# 2phase (PS), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, vanGenuchten capillary pressure
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[ppgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.0
sum_s_res = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/relperm/brooks_corey1.i)
# Test Brooks-Corey relative permeability curve by varying saturation over the mesh
# Exponent lambda = 2 for both phases
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[kr0aux]
family = MONOMIAL
order = CONSTANT
[]
[kr1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[kr0]
type = PorousFlowPropertyAux
property = relperm
phase = 0
variable = kr0aux
[]
[kr1]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = kr1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
expression = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureConst
pc = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityBC
phase = 0
lambda = 2
[]
[kr1]
type = PorousFlowRelativePermeabilityBC
phase = 1
lambda = 2
nw_phase = true
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
warn_discontinuous_face_values = false
variable = 's0aux s1aux kr0aux kr1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 20
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-8
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/gravity/grav02f.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, van Genuchten capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[relpermwater]
family = MONOMIAL
order = CONSTANT
[]
[relpermgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = MaterialStdVectorAux
property = PorousFlow_relative_permeability_qp
index = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
pc_max = 2e5
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.25
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.35
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_stol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-13 15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02f
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/actions/addmaterials.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# materials are added with the default add_nodes parameter, as well as
# at_nodes = true, to make sure that the action doesn't add a duplicate material
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[temperature_nodal]
type = PorousFlowTemperature
at_nodes = true
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[ppss_nodal]
type = PorousFlow2PhasePS
at_nodes = true
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[massfrac_nodal]
type = PorousFlowMassFraction
at_nodes = true
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid0_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[simple_fluid1_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[relperm0_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
at_nodes = true
[]
[relperm1_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
at_nodes = true
[]
[porosity_nodal]
type = PorousFlowPorosityConst
porosity = 0.1
at_nodes = true
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]