# HeatConductionMaterial

General-purpose material model for heat conduction

## Description

HeatConductionMaterial is a general-purpose material model for heat conduction. It sets the thermal conductivity and specific heat at integration points.

## Input Parameters

• specific_heat_temperature_functionSpecific heat as a function of temperature.

C++ Type:FunctionName

Options:

Description:Specific heat as a function of temperature.

• computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the Material via MaterialPropertyInterface::getMaterial(). Non-computed Materials are not sorted for dependencies.

Default:True

C++ Type:bool

Options:

Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the Material via MaterialPropertyInterface::getMaterial(). Non-computed Materials are not sorted for dependencies.

• tempCoupled Temperature

C++ Type:std::vector

Options:

Description:Coupled Temperature

• thermal_conductivityThe thermal conductivity value

C++ Type:double

Options:

Description:The thermal conductivity value

• specific_heatThe specific heat value

C++ Type:double

Options:

Description:The specific heat value

• thermal_conductivity_temperature_functionThermal conductivity as a function of temperature.

C++ Type:FunctionName

Options:

Description:Thermal conductivity as a function of temperature.

• boundaryThe list of boundary IDs from the mesh where this boundary condition applies

C++ Type:std::vector

Options:

Description:The list of boundary IDs from the mesh where this boundary condition applies

• blockThe list of block ids (SubdomainID) that this object will be applied

C++ Type:std::vector

Options:

Description:The list of block ids (SubdomainID) that this object will be applied

### Optional Parameters

• output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)

C++ Type:std::vector

Options:

Description:List of material properties, from this material, to output (outputs must also be defined to an output type)

• outputsnone Vector of output names were you would like to restrict the output of variables(s) associated with this object

Default:none

C++ Type:std::vector

Options:

Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object

### Outputs Parameters

• enableTrueSet the enabled status of the MooseObject.

Default:True

C++ Type:bool

Options:

Description:Set the enabled status of the MooseObject.

• use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Default:False

C++ Type:bool

Options:

Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

• control_tagsAdds user-defined labels for accessing object parameters via control logic.

C++ Type:std::vector

Options:

Description:Adds user-defined labels for accessing object parameters via control logic.

• seed0The seed for the master random number generator

Default:0

C++ Type:unsigned int

Options:

Description:The seed for the master random number generator

• implicitTrueDetermines whether this object is calculated using an implicit or explicit form

Default:True

C++ Type:bool

Options:

Description:Determines whether this object is calculated using an implicit or explicit form

• constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeSubdomainProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped

Default:NONE

C++ Type:MooseEnum

Options:NONE ELEMENT SUBDOMAIN

Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeSubdomainProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped