- momentum_componentThe component of the momentum equation that this kernel applies to.
C++ Type:MooseEnum
Controllable:No
Description:The component of the momentum equation that this kernel applies to.
- variableThe name of the variable whose linear system this object contributes to
C++ Type:LinearVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable whose linear system this object contributes to
LinearFVMomentumFriction
This kernel adds Darcy and Forchheimer resistance to a linear finite volume momentum equation. For superficial velocity , its componentwise resistance is
where is the dynamic viscosity, the density, the porosity, and and the componentwise Darcy and Forchheimer coefficients, which may be anisotropic. The resistance opposes the flow and is added to the momentum equation as on the left-hand side. The Darcy term represents viscous drag and is linear in velocity; the Forchheimer term represents inertial drag and grows quadratically with speed. Either term may be omitted. "mu" is required with "Darcy_name", while density and all velocity components present in the mesh dimension are required with "Forchheimer_name".
The Forchheimer speed is evaluated from interstitial velocity and lagged in the linear solve. Porosity must be positive wherever the Forchheimer term is active.
[LinearFVKernels<<<{"href": "../../syntax/LinearFVKernels/index.html"}>>>]
[u_friction]
type = LinearFVMomentumFriction<<<{"description": "Computes Darcy and/or Forchheimer resistance in a Navier-Stokes momentum equation.", "href": "LinearFVMomentumFriction.html"}>>>
variable<<<{"description": "The name of the variable whose linear system this object contributes to"}>>> = superficial_u
Forchheimer_name<<<{"description": "Name of the Forchheimer coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = forch
porosity<<<{"description": "The porosity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = porosity
rho<<<{"description": "The density required by Forchheimer resistance. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = ${rho}
u<<<{"description": "The x-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = superficial_u
momentum_component<<<{"description": "The component of the momentum equation that this kernel applies to."}>>> = 'x'
block<<<{"description": "The list of blocks (ids or names) that this object will be applied"}>>> = 2
[]
[](modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/porous-baffle-1d.i)Computation of friction factors and pre-factors
See PINSFVMomentumFriction for how the Darcy and Forchheimer coefficients relate to common correlations.
Input Parameters
- Darcy_nameName of the Darcy coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Name of the Darcy coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- Forchheimer_nameName of the Forchheimer coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Name of the Forchheimer coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- muThe dynamic viscosity required by Darcy resistance. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The dynamic viscosity required by Darcy resistance. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- porosity1The porosity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
Default:1
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The porosity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- rhoThe density required by Forchheimer resistance. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The density required by Forchheimer resistance. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- uThe x-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The x-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- vThe y-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The y-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- wThe z-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The z-component of superficial velocity. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
Optional Parameters
- absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution
C++ Type:std::vector<TagName>
Controllable:No
Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_onlyFalseWhether this object is only doing assembly to matrices (no vectors)
Default:False
C++ Type:bool
Controllable:No
Description:Whether this object is only doing assembly to matrices (no vectors)
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsrhsThe tag for the vectors this Kernel should fill
Default:rhs
C++ Type:MultiMooseEnum
Options:rhs, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Contribution To Tagged Field Data Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- ghost_layers1The number of layers of elements to ghost.
Default:1
C++ Type:unsigned short
Controllable:No
Description:The number of layers of elements to ghost.
- use_point_neighborsFalseWhether to use point neighbors, which introduces additional ghosting to that used for simple face neighbors.
Default:False
C++ Type:bool
Controllable:No
Description:Whether to use point neighbors, which introduces additional ghosting to that used for simple face neighbors.
Parallel Ghosting Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/porous-baffle-1d.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/radial-baffle-rz/radial-baffle-rz.i)
- (modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/segregated/channel-drift-flux.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/rz-pipe-channel/porous-baffle-rz.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy-fluid-only.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/errors/kernel-errors.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-diagonal-baffle/porous-baffle-straight-diagonal.i)
mu
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The dynamic viscosity required by Darcy resistance. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
Darcy_name
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Name of the Darcy coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
Forchheimer_name
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Name of the Forchheimer coefficients property. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/porous-baffle-1d.i)
# One-dimensional verification of Bernoulli jumps, porous drag, and form loss.
# Mass conservation gives u_block_1 = u_block_2 = 0.1 and u_block_jump = 0.
# Without drag or form loss, the two pressure jumps (right minus left) are 0.03 and -0.03,
# so p_left = p_right = p_jump = 0. With mu = 1 and Forchheimer = 50, the porous block
# adds a pressure drop of 0.25. A form-loss coefficient of 10 adds 0.4 at each baffle,
# giving p_jump = p_left - p_right = 1.05 and baffle jumps of -0.37 and -0.43.
# Referencing the higher-porosity velocity 0.1 instead of the lower-porosity velocity 0.2 makes the
# form loss 0.1 at that baffle. With reference_velocity_side = 'lower_porosity higher_porosity',
# the baffle jumps are -0.37 and -0.13; with 'higher_porosity lower_porosity', they are -0.07 and
# -0.43. Both give p_jump = 0.75.
mu = 0.0 # 1e-2
rho = 2.0
advected_interp_method = 'average'
forchheimer_value = 50
inlet_u = 0.1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5 0.5'
ix = '200 200 200'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[]
[Problem]
linear_sys_names = 'u_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
momentum_component = 'x'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${inlet_u}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer_value} ${forchheimer_value} ${forchheimer_value}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 0.5 2 1.0 3 0.5'
[]
[]
[Postprocessors]
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[p_jump]
type = ParsedPostprocessor
expression = 'p_left - p_right'
pp_names = 'p_left p_right'
[]
# These points are the centers of the cells adjacent to x = 0.5 and x = 1.0. The mesh spacing
# is 0.5 / 200 = 0.0025, so the adjacent centers are offset by half that distance.
[p_baffle_1_left]
type = PointValue
variable = pressure
point = '0.49875 0 0'
[]
[p_baffle_1_right]
type = PointValue
variable = pressure
point = '0.50125 0 0'
[]
[p_baffle_2_left]
type = PointValue
variable = pressure
point = '0.99875 0 0'
[]
[p_baffle_2_right]
type = PointValue
variable = pressure
point = '1.00125 0 0'
[]
[p_baffle_1_jump]
type = ParsedPostprocessor
expression = 'p_baffle_1_right - p_baffle_1_left'
pp_names = 'p_baffle_1_right p_baffle_1_left'
[]
[p_baffle_2_jump]
type = ParsedPostprocessor
expression = 'p_baffle_2_right - p_baffle_2_left'
pp_names = 'p_baffle_2_right p_baffle_2_left'
[]
[u_block_1]
type = ElementAverageValue
variable = superficial_u
block = 1
[]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[u_block_jump]
type = ParsedPostprocessor
expression = 'u_block_1 - u_block_2'
pp_names = 'u_block_1 u_block_2'
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'timestep_end'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.1
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
# The exact superficial velocity is uniform, so the momentum normalization factor
# sum(|Ax - Ax_avg| + |b - Ax_avg|) nearly vanishes and the normalized momentum residual measures
# round-off. It levels off at a value that depends on the partitioning (near 1e-2 on one process,
# near 1e-1 on three), so only the pressure residual is used as a convergence criterion.
momentum_absolute_tolerance = 1
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy.i)
# Steady conjugate heat transfer from a heated solid to fluid in a 0.5-m porous block.
# The solid fraction scales the 20 MW/m^3 source to 10 MW/m^3. Conservation therefore gives
# u_block_2 = 2, T_fluid_out = 300.59523809524, and h_fluid_out = 1262500.
# For 10 upwind cells, T_fluid_block_2 = 300.32738095238. The local balance gives
# T_solid_block_2 - T_fluid_block_2 = 10e6 / 30000 = 333.33333333333,
# hence T_solid_block_2 = 633.66071428571.
mu = 2e-3
rho = 1000
advected_interp_method = 'upwind'
u_in = 2
forchheimer = 0
bf = '0 0'
cp_fluid = 4200
cp_solid = 500
k_fluid = 0.4
k_solid = 0.2
h_vol = 30000
q_solid = 20000000
T_inlet = 300
T_initial = 300
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
dy = '0.5'
ix = '10 10 10'
iy = '3'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle2
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system solid_energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
form_loss = ${bf}
reference_velocity_side = 'lower_porosity higher_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[h_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = '${fparse cp_fluid * T_initial}'
[]
[T_solid]
type = MooseLinearVariableFVReal
solver_sys = solid_energy_system
initial_condition = ${T_initial}
block = 2
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[fluid_advection]
type = LinearFVEnergyAdvection
variable = h_fluid
advected_quantity = enthalpy
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = rc
[]
[fluid_diffusion]
type = LinearFVDiffusion
variable = h_fluid
diffusion_coeff = kappa_fluid
use_nonorthogonal_correction = false
[]
[fluid_exchange]
type = LinearFVEnthalpyVolumetricHeatTransfer
variable = h_fluid
h_solid_fluid = h_vol
cp = cp_fluid
T_fluid = T_fluid
T_solid = T_solid
is_solid = false
block = 2
[]
[fluid_source]
type = LinearFVSource
variable = h_fluid
source_density = q_fluid_scaled
[]
[solid_diffusion]
type = LinearFVDiffusion
variable = T_solid
diffusion_coeff = ${k_solid}
use_nonorthogonal_correction = false
block = 2
[]
[solid_exchange]
type = LinearFVEnthalpyVolumetricHeatTransfer
variable = T_solid
h_solid_fluid = h_vol
cp = 1.0
T_fluid = T_fluid
T_solid = T_solid
is_solid = true
block = 2
[]
[solid_source]
type = LinearFVSource
variable = T_solid
source_density = q_solid_scaled
block = 2
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_3 bottom_to_1 bottom_to_3 top_to_2 bottom_to_2'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_3 bottom_to_1 bottom_to_3 top_to_2 bottom_to_2'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[pressure-extrapolation]
type = LinearFVPressureFluxBC
boundary = 'bottom_to_1 bottom_to_2 bottom_to_3 top_to_1 top_to_2 top_to_3'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[left_T_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = T_fluid
functor = ${T_inlet}
[]
[left_h_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = h_fluid
functor = h_from_p_T
[]
[walls_h_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'top_to_1 top_to_2 top_to_3 bottom_to_1 bottom_to_2 bottom_to_3'
variable = h_fluid
functor = 0.0
diffusion_coeff = kappa_fluid
[]
[outlet_h_fluid]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = h_fluid
use_two_term_expansion = false
[]
[solid_zero_flux]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'baffle baffle2 top_to_2 bottom_to_2'
variable = T_solid
functor = 0.0
diffusion_coeff = kappa_solid
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer} ${forchheimer} ${forchheimer}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 1.0 2 0.5 3 1.0'
[]
[fluid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_fluid kappa_fluid h_vol q_fluid_scaled'
prop_values = '${cp_fluid} ${fparse k_fluid/cp_fluid} ${h_vol} 0'
[]
[solid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_solid kappa_solid'
prop_values = '${cp_solid} ${fparse k_solid/cp_solid}'
[]
[q_solid]
type = GenericFunctorMaterial
prop_names = 'q_solid'
prop_values = ${q_solid}
block = 2
[]
[q_solid_scaled]
type = ParsedFunctorMaterial
property_name = q_solid_scaled
functor_names = 'porosity q_solid'
expression = '(1 - porosity) * q_solid'
block = 2
[]
[fluid_enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = pressure
T_fluid = T_fluid
h = h_fluid
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = h_from_p_T_functor
functor_names = 'T_fluid'
expression = '${cp_fluid} * T_fluid'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = T_from_p_h_functor
functor_names = 'h_fluid'
expression = 'h_fluid / ${cp_fluid}'
[]
[]
[Postprocessors]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[T_fluid_out]
type = SideAverageValue
variable = T_fluid
boundary = right
[]
[T_fluid_block_2]
type = ElementAverageValue
variable = T_fluid
block = 2
[]
[T_solid_block_2]
type = ElementAverageValue
variable = T_solid
block = 2
[]
[h_fluid_out]
type = SideAverageValue
variable = h_fluid
boundary = right
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[T_fluid]
type = MooseLinearVariableFVReal
initial_condition = ${T_initial}
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'NONLINEAR'
[]
[fluid_temperature]
type = FunctorAux
variable = T_fluid
functor = T_from_p_h
execute_on = 'NONLINEAR'
[]
[]
[VectorPostprocessors]
# Sample each x-cell once at its center.
[centerline]
type = LineValueSampler
variable = 'superficial_u T_fluid T_solid'
start_point = '0.0119047619047619 0.25 0'
end_point = '1.4880952380952381 0.25 0'
num_points = 30
sort_by = x
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
solid_energy_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
solid_energy_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
energy_system = energy_system
solid_energy_system = solid_energy_system
momentum_equation_relaxation = 0.2
pressure_variable_relaxation = 0.1
energy_equation_relaxation = 0.8
num_iterations = 1000
# These outer tolerances stop once the velocity and zero-pressure fields have stabilized to
# substantially below the accuracy exercised by the temperature and velocity profile checks.
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-2
energy_absolute_tolerance = 1e-8
solid_energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
solid_energy_petsc_options_iname = '-pc_type -pc_hypre_type'
solid_energy_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/porous-baffle-1d.i)
# One-dimensional verification of Bernoulli jumps, porous drag, and form loss.
# Mass conservation gives u_block_1 = u_block_2 = 0.1 and u_block_jump = 0.
# Without drag or form loss, the two pressure jumps (right minus left) are 0.03 and -0.03,
# so p_left = p_right = p_jump = 0. With mu = 1 and Forchheimer = 50, the porous block
# adds a pressure drop of 0.25. A form-loss coefficient of 10 adds 0.4 at each baffle,
# giving p_jump = p_left - p_right = 1.05 and baffle jumps of -0.37 and -0.43.
# Referencing the higher-porosity velocity 0.1 instead of the lower-porosity velocity 0.2 makes the
# form loss 0.1 at that baffle. With reference_velocity_side = 'lower_porosity higher_porosity',
# the baffle jumps are -0.37 and -0.13; with 'higher_porosity lower_porosity', they are -0.07 and
# -0.43. Both give p_jump = 0.75.
mu = 0.0 # 1e-2
rho = 2.0
advected_interp_method = 'average'
forchheimer_value = 50
inlet_u = 0.1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5 0.5'
ix = '200 200 200'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[]
[Problem]
linear_sys_names = 'u_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
momentum_component = 'x'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${inlet_u}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer_value} ${forchheimer_value} ${forchheimer_value}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 0.5 2 1.0 3 0.5'
[]
[]
[Postprocessors]
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[p_jump]
type = ParsedPostprocessor
expression = 'p_left - p_right'
pp_names = 'p_left p_right'
[]
# These points are the centers of the cells adjacent to x = 0.5 and x = 1.0. The mesh spacing
# is 0.5 / 200 = 0.0025, so the adjacent centers are offset by half that distance.
[p_baffle_1_left]
type = PointValue
variable = pressure
point = '0.49875 0 0'
[]
[p_baffle_1_right]
type = PointValue
variable = pressure
point = '0.50125 0 0'
[]
[p_baffle_2_left]
type = PointValue
variable = pressure
point = '0.99875 0 0'
[]
[p_baffle_2_right]
type = PointValue
variable = pressure
point = '1.00125 0 0'
[]
[p_baffle_1_jump]
type = ParsedPostprocessor
expression = 'p_baffle_1_right - p_baffle_1_left'
pp_names = 'p_baffle_1_right p_baffle_1_left'
[]
[p_baffle_2_jump]
type = ParsedPostprocessor
expression = 'p_baffle_2_right - p_baffle_2_left'
pp_names = 'p_baffle_2_right p_baffle_2_left'
[]
[u_block_1]
type = ElementAverageValue
variable = superficial_u
block = 1
[]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[u_block_jump]
type = ParsedPostprocessor
expression = 'u_block_1 - u_block_2'
pp_names = 'u_block_1 u_block_2'
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'timestep_end'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.1
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
# The exact superficial velocity is uniform, so the momentum normalization factor
# sum(|Ax - Ax_avg| + |b - Ax_avg|) nearly vanishes and the normalized momentum residual measures
# round-off. It levels off at a value that depends on the partitioning (near 1e-2 on one process,
# near 1e-1 on three), so only the pressure residual is used as a convergence criterion.
momentum_absolute_tolerance = 1
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/radial-baffle-rz/radial-baffle-rz.i)
# Steady inviscid radial outflow through a porous annulus (r < r0) into a region of unit porosity
# (r > r0), separated by a pressure baffle on the cylinder r = r0, in RZ coordinates with x as the
# radial direction. With mass flow per radian m and the friction
# f = mu D U + 0.5 rho F |U| / eps U of LinearFVMomentumFriction, the exact solution is
# U_r = m / (rho r), U_z = 0,
# p = -m^2 / (2 rho eps^2 r^2) - mu D m / (rho eps) ln(r) + F m^2 / (2 rho eps^2 r) + c
# in each region. At the baffle the pressure jumps by the Bernoulli and form-loss terms of
# BernoulliFormLossPressureJump, with the porous side as the lower-porosity reference. The flow is
# inviscid because baffle faces carry no normal viscous stress, which a viscous solution of this
# form would need.
rho = 1
m = 1
eps_bed = 0.4
# Darcy coefficients mu D of each region. Central advection of a divergence-free flow adds almost
# nothing to the momentum diagonal, so without viscosity the friction keeps the momentum systems
# nonsingular, and the plenum needs it too.
darcy_bed = 1
darcy_plenum = 0.5
forchheimer = 2
form_loss = 0.5
r_inner = 1
r_baffle = 1.5
r_outer = 2
height = 0.25
nx = 8
ny = 2
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[Mesh]
[generated]
type = GeneratedMeshGenerator
dim = 2
xmin = ${r_inner}
xmax = ${r_outer}
ymax = ${height}
nx = ${nx}
ny = ${ny}
[]
[bed]
type = ParsedSubdomainMeshGenerator
input = generated
combinatorial_geometry = 'x < ${r_baffle}'
block_id = 1
block_name = bed
[]
[plenum]
type = ParsedSubdomainMeshGenerator
input = bed
combinatorial_geometry = 'x > ${r_baffle}'
block_id = 2
block_name = plenum
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = plenum
primary_block = bed
paired_block = plenum
new_boundary = baffle
[]
coord_type = RZ
rz_coord_axis = Y
[]
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = baffle
porosity = porosity
density = ${rho}
form_loss = ${form_loss}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_projection_method = consistent
pressure_jump_models = pressure_jump
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = 0
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0
gradient_method = jump_aware
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = average
mu = 0
u = superficial_u
v = superficial_v
momentum_component = x
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = average
mu = 0
u = superficial_u
v = superficial_v
momentum_component = y
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
pressure = pressure
porosity = porosity
momentum_component = x
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
pressure = pressure
porosity = porosity
momentum_component = y
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Darcy_name = darcy
Forchheimer_name = forchheimer
mu = 1
rho = ${rho}
porosity = porosity
u = superficial_u
v = superficial_v
momentum_component = x
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Darcy_name = darcy
Forchheimer_name = forchheimer
mu = 1
rho = ${rho}
porosity = porosity
u = superficial_u
v = superficial_v
momentum_component = y
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[velocity_x]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left right top bottom'
variable = superficial_u
functor = exact_u
[]
[velocity_y]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left right top bottom'
variable = superficial_v
functor = 0
[]
[pressure_flux]
type = LinearFVPressureFluxBC
boundary = 'left right top bottom'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[]
[FunctorMaterials]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = 'bed ${eps_bed} plenum 1'
[]
[friction_bed]
type = GenericVectorFunctorMaterial
prop_names = 'darcy forchheimer'
prop_values = '${darcy_bed} ${darcy_bed} ${darcy_bed} ${forchheimer} ${forchheimer} ${forchheimer}'
block = bed
[]
[friction_plenum]
type = GenericVectorFunctorMaterial
prop_names = 'darcy forchheimer'
prop_values = '${darcy_plenum} ${darcy_plenum} ${darcy_plenum} 0 0 0'
block = plenum
[]
[pressure_difference]
type = ParsedFunctorMaterial
property_name = pressure_difference
functor_names = 'pressure exact_pressure'
expression = 'pressure-exact_pressure'
[]
# The pin fixes the pressure of the cell containing the pin point, so the computed pressure is
# compared after removing the mean difference to the exact pressure.
[shifted_pressure]
type = ParsedFunctorMaterial
property_name = shifted_pressure
functor_names = 'pressure mean_pressure_difference'
expression = 'pressure-mean_pressure_difference'
[]
[pressure_error]
type = ParsedFunctorMaterial
property_name = pressure_error
functor_names = 'shifted_pressure exact_pressure'
expression = 'shifted_pressure-exact_pressure'
[]
[u_error]
type = ParsedFunctorMaterial
property_name = u_error
functor_names = 'superficial_u exact_u'
expression = 'superficial_u-exact_u'
[]
[]
[Functions]
[exact_u]
type = ParsedFunction
expression = '${m}/(${rho}*x)'
[]
[bed_pressure]
type = ParsedFunction
expression = '-${m}^2/(2*${rho}*${eps_bed}^2*x^2) - ${darcy_bed}*${m}/(${rho}*${eps_bed})*log(x) '
'+ ${forchheimer}*${m}^2/(2*${rho}*${eps_bed}^2*x)'
[]
[plenum_pressure]
type = ParsedFunction
expression = '-${m}^2/(2*${rho}*x^2) - ${darcy_plenum}*${m}/${rho}*log(x)'
[]
# p_plenum(r0) - p_bed(r0) = 0.5 rho u0^2 (1/eps_bed^2 - 1) - 0.5 K rho (u0/eps_bed)^2 with
# u0 = m / (rho r0).
[exact_pressure]
type = ParsedFunction
symbol_names = 'pb pp u0'
symbol_values = 'bed_pressure plenum_pressure ${fparse m / (rho * r_baffle)}'
expression = 'if(x < ${r_baffle}, pb, pp + '
'(-${m}^2/(2*${rho}*${eps_bed}^2*${r_baffle}^2) - ${darcy_bed}*${m}/(${rho}*${eps_bed})*log(${r_baffle}) '
'+ ${forchheimer}*${m}^2/(2*${rho}*${eps_bed}^2*${r_baffle}) + ${m}^2/(2*${rho}*${r_baffle}^2) '
'+ ${darcy_plenum}*${m}/${rho}*log(${r_baffle})) '
'+ 0.5*${rho}*u0^2*(1/${eps_bed}^2 - 1) - 0.5*${form_loss}*${rho}*(u0/${eps_bed})^2)'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
momentum_l_max_its = 100
pressure_l_max_its = 100
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
# Without viscosity nothing damps round-off in the axial velocity, and at a momentum relaxation
# of 0.5 the iteration amplifies it by about 1% per iteration on the twice-refined mesh.
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.2
num_iterations = 3000
pressure_absolute_tolerance = 1e-9
# The exact axial velocity is zero, so the axial momentum system has a vanishing normalization
# factor and its normalized residual stays O(1e-2) at round-off. Its tolerance is therefore not
# used as a convergence criterion; L2v checks the axial velocity instead.
momentum_absolute_tolerance = '1e-9 1'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
pin_pressure = true
pressure_pin_value = 0
pressure_pin_point = '${fparse 0.5 * (r_baffle + r_outer)} ${fparse 0.5 * height} 0'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
[Postprocessors]
[mean_pressure_difference]
type = ElementAverageFunctorPostprocessor
functor = pressure_difference
execute_on = FINAL
# Must run before the pressure errors that subtract it.
execution_order_group = -1
outputs = none
[]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[L2u]
type = ElementL2FunctorError
approximate = superficial_u
exact = exact_u
execute_on = FINAL
[]
[L2v]
type = ElementL2FunctorError
approximate = superficial_v
exact = 0
execute_on = FINAL
[]
[L2p]
type = ElementL2FunctorError
approximate = shifted_pressure
exact = exact_pressure
execute_on = FINAL
[]
# The maximum pointwise errors detect cell-to-cell oscillations that the L2 norms average out.
[max_u_error]
type = ElementExtremeFunctorValue
functor = u_error
value_type = max_abs
execute_on = FINAL
[]
[max_v_error]
type = ElementExtremeFunctorValue
functor = superficial_v
value_type = max_abs
execute_on = FINAL
[]
[max_p_error]
type = ElementExtremeFunctorValue
functor = pressure_error
value_type = max_abs
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/segregated/channel-drift-flux.i)
mu = 1.0
rho = 10.0
mu_d = 0.1
rho_d = 1.0
l = 2
# 'average' leads to slight oscillations, upwind may be preferred
# This method is selected for consistency with the original nonlinear input
advected_interp_method = 'average'
# TODO remove need for those
cp = 1
k = 1
cp_d = 1
k_d = 1
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = '${fparse l * 5}'
ymin = '${fparse -l / 2}'
ymax = '${fparse l / 2}'
nx = 10
ny = 4
[]
uniform_refine = 0
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system phi_system'
previous_nl_solution_required = true
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = 1
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
[]
[phase_2]
type = MooseLinearVariableFVReal
solver_sys = phi_system
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[flow_p_diffusion]
type = LinearFVPressureCorrectionDiffusion
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
variable = pressure
[]
[flow_HbyA_divergence]
type = LinearFVDivergence
face_flux = HbyA
force_boundary_execution = true
variable = pressure
[]
[flow_ins_momentum_flux_x]
type = LinearWCNSFVMomentumFlux
advected_interp_method_name = ${advected_interp_method}
momentum_component = x
mu = mu_mixture
rhie_chow_user_object = ins_rhie_chow_interpolator
u = vel_x
use_deviatoric_terms = false
use_nonorthogonal_correction = false
v = vel_y
variable = vel_x
[]
[flow_ins_momentum_flux_y]
type = LinearWCNSFVMomentumFlux
advected_interp_method_name = ${advected_interp_method}
momentum_component = y
mu = mu_mixture
rhie_chow_user_object = ins_rhie_chow_interpolator
u = vel_x
use_deviatoric_terms = false
use_nonorthogonal_correction = false
v = vel_y
variable = vel_y
[]
[mixture_drift_flux_x]
type = LinearWCNSFV2PMomentumDriftFlux
density_interp_method = average
fraction_dispersed = phase_2
momentum_component = x
rhie_chow_user_object = ins_rhie_chow_interpolator
rho_d = ${rho_d}
u_slip = vel_slip_x
v_slip = vel_slip_y
variable = vel_x
[]
[mixture_drift_flux_y]
type = LinearWCNSFV2PMomentumDriftFlux
density_interp_method = average
fraction_dispersed = phase_2
momentum_component = y
rhie_chow_user_object = ins_rhie_chow_interpolator
rho_d = ${rho_d}
u_slip = vel_slip_x
v_slip = vel_slip_y
variable = vel_y
[]
[flow_ins_momentum_pressure_x]
type = LinearFVMomentumPressure
momentum_component = x
pressure = pressure
variable = vel_x
[]
[flow_ins_momentum_pressure_y]
type = LinearFVMomentumPressure
momentum_component = y
pressure = pressure
variable = vel_y
[]
[flow_momentum_friction_0_x]
type = LinearFVMomentumFriction
Darcy_name = Darcy_coefficient_vec
momentum_component = x
mu = mu_mixture
variable = vel_x
[]
[flow_momentum_friction_0_y]
type = LinearFVMomentumFriction
Darcy_name = Darcy_coefficient_vec
momentum_component = y
mu = mu_mixture
variable = vel_y
[]
# Mixture phase equation
[mixture_ins_phase_2_advection]
type = LinearFVScalarAdvection
advected_interp_method_name = upwind
rhie_chow_user_object = ins_rhie_chow_interpolator
u_slip = vel_slip_x
v_slip = vel_slip_y
variable = phase_2
[]
[mixture_phase_interface_reaction]
type = LinearFVReaction
coeff = 0.1
variable = phase_2
[]
[mixture_phase_interface_source]
type = LinearFVSource
scaling_factor = 0.1
source_density = phase_1
variable = phase_2
[]
[]
[LinearFVBCs]
[vel_x_left]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
functor = 1
variable = vel_x
[]
[vel_y_left]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
functor = 0
variable = vel_y
[]
[pressure_extrapolation_inlet_left]
type = LinearFVExtrapolatedPressureBC
boundary = left
use_two_term_expansion = true
variable = pressure
[]
[vel_x_right]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
use_two_term_expansion = true
variable = vel_x
[]
[vel_y_right]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
use_two_term_expansion = true
variable = vel_y
[]
[pressure_right]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
functor = 0
variable = pressure
[]
[vel_x_bottom]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = bottom
functor = 0
variable = vel_x
[]
[vel_y_bottom]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = bottom
functor = 0
variable = vel_y
[]
[vel_x_top]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = top
functor = 0
variable = vel_x
[]
[vel_y_top]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = top
functor = 0
variable = vel_y
[]
[pressure_extrapolation_top_bottom]
type = LinearFVExtrapolatedPressureBC
boundary = 'top bottom'
use_two_term_expansion = true
variable = pressure
[]
[phase_2_left]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
functor = 0.1
variable = phase_2
[]
[phase_2_right]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
use_two_term_expansion = true
variable = phase_2
[]
[]
[FunctorMaterials]
[flow_ins_speed_material]
type = ADVectorMagnitudeFunctorMaterial
execute_on = ALWAYS
outputs = none
vector_magnitude_name = speed
x_functor = vel_x
y_functor = vel_y
[]
[mixture_phase_1_fraction]
type = ParsedFunctorMaterial
execute_on = ALWAYS
expression = '1 - phase_2'
functor_names = phase_2
output_properties = phase_1
outputs = all
property_name = phase_1
[]
[mixture_mixture_material]
type = WCNSLinearFVMixtureFunctorMaterial
execute_on = ALWAYS
limit_phase_fraction = true
outputs = all
phase_1_fraction = phase_2
phase_1_names = '${rho_d} ${mu_d} ${cp_d} ${k_d}'
phase_2_names = '${rho} ${mu} ${cp} ${k}'
prop_names = 'rho_mixture mu_mixture cp_mixture k_mixture'
[]
[mixture_slip_x]
type = WCNSFV2PSlipVelocityFunctorMaterial
execute_on = ALWAYS
gravity = '0 0 0'
linear_coef_name = Darcy_coefficient
momentum_component = x
mu = mu_mixture
outputs = all
particle_diameter = 0.01
rho = ${rho}
rho_d = ${rho_d}
slip_velocity_name = vel_slip_x
u = vel_x
v = vel_y
[]
[mixture_slip_y]
type = WCNSFV2PSlipVelocityFunctorMaterial
execute_on = ALWAYS
gravity = '0 0 0'
linear_coef_name = Darcy_coefficient
momentum_component = y
mu = mu_mixture
outputs = all
particle_diameter = 0.01
rho = ${rho}
rho_d = ${rho_d}
slip_velocity_name = vel_slip_y
u = vel_x
v = vel_y
[]
[mixture_dispersed_drag]
type = NSFVDispersePhaseDragFunctorMaterial
drag_coef_name = Darcy_coefficient
execute_on = ALWAYS
mu = mu_mixture
outputs = all
particle_diameter = 0.01
rho = rho_mixture
u = vel_x
v = vel_y
[]
[]
[UserObjects]
[ins_rhie_chow_interpolator]
type = RhieChowMassFlux
p_diffusion_kernel = flow_p_diffusion
pressure = pressure
rho = rho_mixture
u = vel_x
v = vel_y
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'ins_rhie_chow_interpolator'
# Systems
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
active_scalar_systems = 'phi_system'
momentum_equation_relaxation = 0.8
active_scalar_equation_relaxation = '0.7'
pressure_variable_relaxation = 0.3
# We need to converge the problem to show conservation
num_iterations = 200
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
active_scalar_absolute_tolerance = '1e-10'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
active_scalar_petsc_options_iname = '-pc_type -pc_hypre_type'
active_scalar_petsc_options_value = 'hypre boomeramg'
momentum_l_abs_tol = 1e-13
pressure_l_abs_tol = 1e-13
active_scalar_l_abs_tol = 1e-13
momentum_l_tol = 0
pressure_l_tol = 0
active_scalar_l_tol = 0
# print_fields = true
continue_on_max_its = true
[]
[Outputs]
csv = true
[]
[Postprocessors]
[Re]
type = ParsedPostprocessor
expression = '10.0 * 2 * 1'
[]
[average_phase2]
type = ElementAverageValue
variable = phase_2
[]
[dp]
type = PressureDrop
boundary = 'left right'
downstream_boundary = right
pressure = pressure
upstream_boundary = left
[]
[max_phase2]
type = ElementExtremeValue
variable = phase_2
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/rz-pipe-channel/porous-baffle-rz.i)
# Axisymmetric pipe version of ../1d-simple-channel/porous-baffle-1d.i: the same axial flow in an
# RZ pipe of radius 0.5 with symmetry conditions on the axis and on the wall (slip), so the
# solution is independent of r and must reproduce the one-dimensional results. The comments below
# are those of the one-dimensional input.
# One-dimensional verification of Bernoulli jumps, porous drag, and form loss.
# Mass conservation gives u_block_1 = u_block_2 = 0.1 and u_block_jump = 0.
# Without drag or form loss, the two pressure jumps (right minus left) are 0.03 and -0.03,
# so p_left = p_right = p_jump = 0. With mu = 1 and Forchheimer = 50, the porous block
# adds a pressure drop of 0.25. A form-loss coefficient of 10 adds 0.4 at each baffle,
# giving p_jump = p_left - p_right = 1.05 and baffle jumps of -0.37 and -0.43.
mu = 0.0 # 1e-2
rho = 2.0
advected_interp_method = 'average'
forchheimer_value = 50
inlet_u = 0.1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
ix = '200 200 200'
dy = '0.5'
iy = '2'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
coord_type = RZ
rz_coord_axis = X
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${inlet_u}
[]
[inlet_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
# The axis (bottom) and the slip wall (top) are both symmetry planes for this flow.
[symmetry_u]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom top'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = 'x'
[]
[symmetry_v]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom top'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = 'y'
[]
[symmetry_p]
type = LinearFVPressureSymmetryBC
boundary = 'bottom top'
variable = pressure
HbyA_flux = HbyA
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer_value} ${forchheimer_value} ${forchheimer_value}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 0.5 2 1.0 3 0.5'
[]
[]
[Postprocessors]
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[p_jump]
type = ParsedPostprocessor
expression = 'p_left - p_right'
pp_names = 'p_left p_right'
[]
# These points are the centers of the cells adjacent to x = 0.5 and x = 1.0. The mesh spacing
# is 0.5 / 200 = 0.0025, so the adjacent centers are offset by half that distance. The radial
# coordinate 0.375 is the center of the outer row of cells.
[p_baffle_1_left]
type = PointValue
variable = pressure
point = '0.49875 0.375 0'
[]
[p_baffle_1_right]
type = PointValue
variable = pressure
point = '0.50125 0.375 0'
[]
[p_baffle_2_left]
type = PointValue
variable = pressure
point = '0.99875 0.375 0'
[]
[p_baffle_2_right]
type = PointValue
variable = pressure
point = '1.00125 0.375 0'
[]
[p_baffle_1_jump]
type = ParsedPostprocessor
expression = 'p_baffle_1_right - p_baffle_1_left'
pp_names = 'p_baffle_1_right p_baffle_1_left'
[]
[p_baffle_2_jump]
type = ParsedPostprocessor
expression = 'p_baffle_2_right - p_baffle_2_left'
pp_names = 'p_baffle_2_right p_baffle_2_left'
[]
[u_block_1]
type = ElementAverageValue
variable = superficial_u
block = 1
[]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[u_block_jump]
type = ParsedPostprocessor
expression = 'u_block_1 - u_block_2'
pp_names = 'u_block_1 u_block_2'
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'timestep_end'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.1
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
# The Forchheimer case plateaus near 1e-2 after pressure and velocity stabilize; 2e-2 stops
# with the total pressure drop within 2e-6 relative to the value after 1000 iterations.
momentum_absolute_tolerance = 2e-2
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy-fluid-only.i)
# Steady fluid-only enthalpy transport through a 0.5-m heated porous block.
# With rho = 1000, u = 2, cp = 4200, and q = 20 MW/m^3, conservation gives
# u_block_2 = 2, T_fluid_out = 301.19047619048, and h_fluid_out = 1265000.
# For 10 upwind cells in the heated block, T_fluid_block_2 = 300.65476190476.
mu = 2e-3
rho = 1000
advected_interp_method = 'upwind'
u_in = 2
forchheimer = 0
bf = '0 0'
cp_fluid = 4200
k_fluid = 0.4
h_vol = 300
T_inlet = 300
T_initial = 300
q = 20000000
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
dy = '0.5'
ix = '10 10 10'
iy = '3'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle2
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
form_loss = ${bf}
reference_velocity_side = 'lower_porosity higher_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[h_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = '${fparse cp_fluid * T_initial}'
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[fluid_advection]
type = LinearFVEnergyAdvection
variable = h_fluid
advected_quantity = enthalpy
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = rc
[]
[fluid_diffusion]
type = LinearFVDiffusion
variable = h_fluid
diffusion_coeff = kappa_fluid
use_nonorthogonal_correction = false
[]
[fluid_source]
type = LinearFVSource
variable = h_fluid
source_density = q_fluid_scaled
block = 2
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_2 bottom_to_2 top_to_1 top_to_3 bottom_to_1 bottom_to_3'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_2 bottom_to_2 top_to_1 top_to_3 bottom_to_1 bottom_to_3'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[pressure-extrapolation]
type = LinearFVPressureFluxBC
boundary = 'bottom_to_1 bottom_to_2 bottom_to_3 top_to_1 top_to_2 top_to_3'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[left_T_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = T_fluid
functor = ${T_inlet}
[]
[left_h_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = h_fluid
functor = h_from_p_T
[]
[walls_h_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'top_to_1 top_to_2 top_to_3 bottom_to_1 bottom_to_2 bottom_to_3'
variable = h_fluid
functor = 0.0
diffusion_coeff = kappa_fluid
[]
[outlet_h_fluid]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = h_fluid
use_two_term_expansion = false
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer} ${forchheimer} ${forchheimer}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 1.0 2 0.5 3 1.0'
[]
[fluid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_fluid kappa_fluid h_vol q_fluid_scaled'
prop_values = '${cp_fluid} ${fparse k_fluid/cp_fluid} ${h_vol} ${q}'
[]
[fluid_enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = pressure
T_fluid = T_fluid
h = h_fluid
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = h_from_p_T_functor
functor_names = 'T_fluid'
expression = '${cp_fluid} * T_fluid'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = T_from_p_h_functor
functor_names = 'h_fluid'
expression = 'h_fluid / ${cp_fluid}'
[]
[]
[Postprocessors]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[T_fluid_out]
type = SideAverageValue
variable = T_fluid
boundary = right
[]
[T_fluid_block_2]
type = ElementAverageValue
variable = T_fluid
block = 2
[]
[h_fluid_out]
type = SideAverageValue
variable = h_fluid
boundary = right
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[T_fluid]
type = MooseLinearVariableFVReal
initial_condition = ${T_initial}
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'NONLINEAR'
[]
[fluid_temperature]
type = FunctorAux
variable = T_fluid
functor = T_from_p_h
execute_on = 'NONLINEAR'
[]
[]
[VectorPostprocessors]
# Sample each x-cell once at its center.
[centerline]
type = LineValueSampler
variable = 'superficial_u T_fluid'
start_point = '0.0119047619047619 0.25 0'
end_point = '1.4880952380952381 0.25 0'
num_points = 30
sort_by = x
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
energy_system = energy_system
momentum_equation_relaxation = 0.2
pressure_variable_relaxation = 0.2
energy_equation_relaxation = 0.7
num_iterations = 1000
# These outer tolerances stop once the velocity and zero-pressure fields have stabilized to
# substantially below the accuracy exercised by the temperature and velocity profile checks.
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-2
energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/errors/kernel-errors.i)
# Isolated LinearFVMomentumFriction constructor and assembly errors.
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 1
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = u_sys
initial_condition = 1.0
[]
[]
[FunctorMaterials]
[darcy]
type = GenericVectorFunctorMaterial
prop_names = darcy
prop_values = '1 1 1'
[]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '1 1 1'
[]
[]
[LinearFVKernels]
active = 'no_model'
[no_model]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
[]
[darcy_no_mu]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
Darcy_name = darcy
[]
[forch_no_rho]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
Forchheimer_name = forch
u = 1
v = 0
w = 0
[]
[forch_no_u]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
Forchheimer_name = forch
rho = 1
v = 0
w = 0
[]
[forch_no_v]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
Forchheimer_name = forch
rho = 1
u = 1
w = 0
[]
[forch_no_w]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
Forchheimer_name = forch
rho = 1
u = 1
v = 0
[]
[forch_zero_porosity]
type = LinearFVMomentumFriction
variable = u
momentum_component = x
Forchheimer_name = forch
rho = 1
u = 1
v = 0
w = 0
porosity = 0
[]
[source]
type = LinearFVSource
variable = u
source_density = 1
[]
[]
[Executioner]
type = Steady
system_names = u_sys
[]
[Outputs]
csv = false
exodus = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-diagonal-baffle/porous-baffle-straight-diagonal.i)
# Straight-channel hydraulic-only porous-baffle showcase.
# Flow enters from the left, crosses a diagonal porous baffle in a straight section,
# and exits to the right through a channel with slip walls.
# The solution should conserve the imposed unit superficial flow, produce positive pressure
# drops across the clean-to-porous, diagonal, and porous-to-clean interfaces, and keep the
# transverse velocity smooth on both sides of the diagonal. The skew geometry and porous drag
# preclude a useful closed-form pressure distribution, so the profiles provide the reference.
inlet_velocity = 1.0
rho = 998.2
mu = 2e-3
mu_zone_2 = ${mu}
eps_zone_1 = 0.5
eps_zone_2 = 0.7
forch_zone_1 = 10
forch_zone_2 = 10
entry_form_loss = 20
corner_form_loss = 20
exit_form_loss = 20
advected_interp_method = 'upwind'
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[clean_inlet_gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 7
ny = 7
xmin = 0
xmax = 1
ymin = 0
ymax = 1
[]
[clean_inlet_id]
type = SubdomainIDGenerator
input = clean_inlet_gmg
subdomain_id = 1
[]
[clean_inlet_block]
type = RenameBlockGenerator
input = clean_inlet_id
old_block = '1'
new_block = 'clean_inlet'
[]
[clean_inlet_boundary]
type = RenameBoundaryGenerator
input = clean_inlet_block
old_boundary = 'bottom right top left'
new_boundary = 'bottom_clean clean_to_porous_tmp top_clean inlet'
[]
[porous_1_patch]
type = TransfiniteMeshGenerator
corners = '1 0 0
1.7 0 0
2.3 1 0
1 1 0'
nx = 8
ny = 8
bottom_type = LINE
top_type = LINE
right_type = LINE
left_type = LINE
[]
[porous_1_id]
type = SubdomainIDGenerator
input = porous_1_patch
subdomain_id = 2
[]
[porous_1_block]
type = RenameBlockGenerator
input = porous_1_id
old_block = '2'
new_block = 'porous_zone_1'
[]
[porous_1_boundary]
type = RenameBoundaryGenerator
input = porous_1_block
old_boundary = 'bottom right top left'
new_boundary = 'bottom_porous diagonal_p_tmp top_porous clean_to_porous_tmp'
[]
[porous_2_patch]
type = TransfiniteMeshGenerator
corners = '2.3 1 0
1.7 0 0
3 0 0
3 1 0'
nx = 8
ny = 8
bottom_type = LINE
top_type = LINE
right_type = LINE
left_type = LINE
[]
[porous_2_id]
type = SubdomainIDGenerator
input = porous_2_patch
subdomain_id = 3
[]
[porous_2_block]
type = RenameBlockGenerator
input = porous_2_id
old_block = '3'
new_block = 'porous_zone_2'
[]
[porous_2_boundary]
type = RenameBoundaryGenerator
input = porous_2_block
old_boundary = 'bottom right top left'
new_boundary = 'diagonal_p_tmp bottom_porous porous_to_clean_tmp top_porous'
[]
[clean_outlet_gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 14
ny = 7
xmin = 3
xmax = 5
ymin = 0
ymax = 1
[]
[clean_outlet_id]
type = SubdomainIDGenerator
input = clean_outlet_gmg
subdomain_id = 4
[]
[clean_outlet_block]
type = RenameBlockGenerator
input = clean_outlet_id
old_block = '4'
new_block = 'clean_outlet'
[]
[clean_outlet_boundary]
type = RenameBoundaryGenerator
input = clean_outlet_block
old_boundary = 'bottom right top left'
new_boundary = 'bottom_clean outlet top_clean porous_to_clean_tmp'
[]
[stitched_mesh]
type = StitchMeshGenerator
inputs = 'clean_inlet_boundary
porous_1_boundary
porous_2_boundary
clean_outlet_boundary'
stitch_boundaries_pairs = 'clean_to_porous_tmp clean_to_porous_tmp;
diagonal_p_tmp diagonal_p_tmp;
porous_to_clean_tmp porous_to_clean_tmp'
clear_stitched_boundary_ids = true
merge_boundaries_with_same_name = true
[]
[clean_to_porous]
type = SideSetsBetweenSubdomainsGenerator
input = stitched_mesh
primary_block = 'clean_inlet'
paired_block = 'porous_zone_1'
new_boundary = 'clean_to_porous'
[]
[diagonal_baffle]
type = SideSetsBetweenSubdomainsGenerator
input = clean_to_porous
primary_block = 'porous_zone_1'
paired_block = 'porous_zone_2'
new_boundary = 'diagonal_baffle'
[]
[porous_to_clean]
type = SideSetsBetweenSubdomainsGenerator
input = diagonal_baffle
primary_block = 'porous_zone_2'
paired_block = 'clean_outlet'
new_boundary = 'porous_to_clean'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'clean_to_porous diagonal_baffle porous_to_clean'
porosity = porosity
density = ${rho}
form_loss = '${entry_form_loss} ${corner_form_loss} ${exit_form_loss}'
reference_velocity_side = 'lower_porosity lower_porosity lower_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_projection_method = consistent
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_velocity}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = dynamic_viscosity
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = dynamic_viscosity
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 'porous_zone_1 porous_zone_2'
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 'porous_zone_1 porous_zone_2'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = true
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = inlet
variable = superficial_u
functor = ${inlet_velocity}
[]
[inlet_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = inlet
variable = superficial_v
functor = 0.0
[]
[pressure-extrapolation]
type = LinearFVExtrapolatedPressureBC
boundary = 'inlet'
variable = pressure
use_two_term_expansion = true
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = outlet
variable = superficial_u
use_two_term_expansion = true
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = outlet
variable = superficial_v
use_two_term_expansion = true
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = outlet
variable = pressure
functor = 0.0
[]
[slip_u]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom_clean top_clean bottom_porous top_porous'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[slip_v]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom_clean top_clean bottom_porous top_porous'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[pressure-split]
type = LinearFVPressureFluxBC
boundary = 'bottom_clean top_clean bottom_porous top_porous'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[]
[FunctorMaterials]
[viscosity_clean_and_zone_1]
type = GenericFunctorMaterial
prop_names = 'dynamic_viscosity'
prop_values = '${mu}'
block = 'clean_inlet porous_zone_1 clean_outlet'
[]
[viscosity_zone_2]
type = GenericFunctorMaterial
prop_names = 'dynamic_viscosity'
prop_values = '${mu_zone_2}'
block = 'porous_zone_2'
[]
[porosity_clean]
type = GenericFunctorMaterial
prop_names = 'porosity'
prop_values = '1.0'
block = 'clean_inlet clean_outlet'
[]
[porosity_zone_1]
type = GenericFunctorMaterial
prop_names = 'porosity'
prop_values = '${eps_zone_1}'
block = 'porous_zone_1'
[]
[porosity_zone_2]
type = GenericFunctorMaterial
prop_names = 'porosity'
prop_values = '${eps_zone_2}'
block = 'porous_zone_2'
[]
[interstitial_tangential_velocity]
# The diagonal baffle runs from (1.7, 0) to (2.3, 1), so its unit tangent is (0.6, 1) / |(0.6, 1)|.
type = ParsedFunctorMaterial
property_name = interstitial_tangential_velocity_functor
functor_names = 'superficial_u superficial_v porosity'
expression = '(0.6 * superficial_u + superficial_v) / (sqrt(1.36) * porosity)'
[]
[forch_zone_1]
type = GenericVectorFunctorMaterial
prop_names = 'forch'
prop_values = '${forch_zone_1} ${fparse forch_zone_1} ${forch_zone_1}'
block = 'porous_zone_1 clean_outlet'
[]
[forch_zone_2]
type = GenericVectorFunctorMaterial
prop_names = 'forch'
prop_values = '${fparse forch_zone_2} ${forch_zone_2} ${forch_zone_2}'
block = 'porous_zone_2 clean_inlet'
[]
[]
[Postprocessors]
[p_inlet]
type = SideAverageValue
variable = pressure
boundary = inlet
[]
[p_outlet]
type = SideAverageValue
variable = pressure
boundary = outlet
[]
[p_total_drop]
type = ParsedPostprocessor
expression = 'p_inlet - p_outlet'
pp_names = 'p_inlet p_outlet'
[]
[p_clean_in]
type = ElementAverageValue
variable = pressure
block = 'clean_inlet'
[]
[p_porous_1]
type = ElementAverageValue
variable = pressure
block = 'porous_zone_1'
[]
[p_porous_2]
type = ElementAverageValue
variable = pressure
block = 'porous_zone_2'
[]
[p_clean_out]
type = ElementAverageValue
variable = pressure
block = 'clean_outlet'
[]
[p_entry_drop]
type = ParsedPostprocessor
expression = 'p_clean_in - p_porous_1'
pp_names = 'p_clean_in p_porous_1'
[]
[p_baffle_drop]
type = ParsedPostprocessor
expression = 'p_porous_1 - p_porous_2'
pp_names = 'p_porous_1 p_porous_2'
[]
[p_exit_drop]
type = ParsedPostprocessor
expression = 'p_porous_2 - p_clean_out'
pp_names = 'p_porous_2 p_clean_out'
[]
[]
[VectorPostprocessors]
# The cells intersected by this horizontal line have uniform width; sample each once.
[horizontal_profile]
type = LineValueSampler
variable = 'pressure superficial_u'
warn_discontinuous_face_values = false
start_point = '0.0714285714285714 0.5 0'
end_point = '3.9285714285714286 0.5 0'
num_points = 28
sort_by = x
[]
# Sample the two cell-center rows adjacent and parallel to the diagonal baffle.
[v_y_left_of_interface]
type = LineValueSampler
variable = superficial_v
warn_discontinuous_face_values = false
start_point = '1.689795918367347 0.0714285714285714 0'
end_point = '2.167346938775510 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[v_y_right_of_interface]
type = LineValueSampler
variable = superficial_v
warn_discontinuous_face_values = false
start_point = '1.832653061224490 0.0714285714285714 0'
end_point = '2.310204081632653 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[ut_left_of_interface]
type = LineValueSampler
variable = interstitial_tangential_velocity
warn_discontinuous_face_values = false
start_point = '1.689795918367347 0.0714285714285714 0'
end_point = '2.167346938775510 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[ut_right_of_interface]
type = LineValueSampler
variable = interstitial_tangential_velocity
warn_discontinuous_face_values = false
start_point = '1.832653061224490 0.0714285714285714 0'
end_point = '2.310204081632653 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[skew_pressure_profile]
# This skew line intersects cells over unequal distances, so list one interior point per cell.
type = PointValueSampler
variable = pressure
warn_discontinuous_face_values = false
points = '2.0282 0.9437 0
2.0639 0.8722 0
2.1039 0.7922 0
2.1396 0.7208 0
2.1700 0.6600 0
2.2057 0.5885 0
2.2418 0.5165 0
2.2775 0.4451 0
2.3208 0.3584 0
2.3565 0.2869 0
2.3929 0.2143 0
2.4454 0.1092 0
2.4811 0.0377 0'
sort_by = x
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[interstitial_tangential_velocity]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[porosity_display]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = timestep_end
[]
[interstitial_tangential_velocity]
type = FunctorAux
variable = interstitial_tangential_velocity
functor = interstitial_tangential_velocity_functor
execute_on = timestep_end
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.5
pressure_variable_relaxation = 0.2
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
file_base = porous-baffle-straight-diagonal_out
csv = true
execute_on = timestep_end
[]