- boundaryThe list of boundary IDs from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundary IDs from the mesh where this object applies
- variableThe name of the variable that this boundary condition applies to
C++ Type:LinearVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this boundary condition applies to
LinearFVAdvectionDiffusionOutflowBC
Description
LinearFVAdvectionDiffusionOutflowBC will contribute to the system matrix and right hand side of a linear finite volume system. The contributions can be derived using the integral of the advective flux over a boundary face () of a boundary element:
where , and are the outlet face velocity, outward pointing surface vector and the surface area,
The value of can be computed two different ways depending on the setting of the "use_two_term_expansion" parameter. When the two-term expansion is enabled the face value is approximated as:
where and are the solution value and gradient in the boundary cell, while is the vector pointing to the face center from the boundary cell centroid. When "use_two_term_expansion" is disabled the following first-order approximation is used:
This boundary condition assumes zero normal gradient contribution to the diffusion terms.
This boundary condition should only be used for problems which involve advection and/or diffusion problems.
Example Syntax
[LinearFVBCs<<<{"href": "../../syntax/LinearFVBCs/index.html"}>>>]
[inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC<<<{"description": "Adds a dirichlet BC which can be used for the assembly of linear finite volume system and whose face values are determined using a functor. This kernel is only designed to work with advection-diffusion problems.", "href": "LinearFVAdvectionDiffusionFunctorDirichletBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = u
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = "left top bottom"
functor<<<{"description": "The functor for this boundary condition. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC<<<{"description": "Adds a boundary condition which represents a surface with outflowing material with a constant velocity. This kernel is only compatible with advection-diffusion problems.", "href": "LinearFVAdvectionDiffusionOutflowBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = u
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = "right"
use_two_term_expansion<<<{"description": "If an approximate linear expansion should be used to compute the face value."}>>> = false
[]
[](test/tests/linearfvkernels/advection/advection-2d.i)Input Parameters
- use_two_term_expansionFalseIf an approximate linear expansion should be used to compute the face value.
Default:False
C++ Type:bool
Controllable:No
Description:If an approximate linear expansion should be used to compute the face value.
Optional Parameters
- absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution
C++ Type:std::vector<TagName>
Controllable:No
Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_onlyFalseWhether this object is only doing assembly to matrices (no vectors)
Default:False
C++ Type:bool
Controllable:No
Description:Whether this object is only doing assembly to matrices (no vectors)
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsrhsThe tag for the vectors this Kernel should fill
Default:rhs
C++ Type:MultiMooseEnum
Options:rhs, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Contribution To Tagged Field Data Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- search_methodnearest_node_connected_sidesChoice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
Default:nearest_node_connected_sides
C++ Type:MooseEnum
Options:nearest_node_connected_sides, all_proximate_sides
Controllable:No
Description:Choice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
Advanced Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_volume/ins/cht/bulk_heat_transfer/flow-around-square-linear.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/2d-boussinesq.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/bfs/linear-segregated-transient/BFS_ERCOFTAC.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/steady-transient-compare/common-blocks.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d-heated/fluid.i)
- (test/tests/variables/linearfv/shared-gradient-method.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/SIMPLEC/3d/3d-velocity-pressure.i)
- (test/tests/linearfvkernels/advection/diagonal-step-2d-delaunay.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/enthalpy_equation.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/rotated-channel.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/momentum-pressure-block-restricted.i)
- (test/tests/linearfvkernels/advection/advection-2d.i)
- (test/tests/linearfvbcs/scalar_symmetry/advection-2d-symmetry.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC-physics.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/rz-pipe-channel/porous-baffle-rz.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_scalars-physics.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/2d-boussinesq-transient.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC_symmetric.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-diagonal-baffle/porous-baffle-straight-diagonal.i)
- (test/tests/linearfvkernels/advection/advection-2d-rz.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_heated-physics.i)
- (test/tests/linearfvkernels/diffusion-reaction-advection/advection-diffusion-reaction-1d.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/heated-channel/channel_ERCOFTAC_heated.i)
- (test/tests/linearfvbcs/robin/advection-2d-robin.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy-fluid-only.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/block-restricted/block-ke.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/errors/pressure-jump-errors.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d-scalar/channel.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/2d-velocity-pressure.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-variable-density/porous-baffle-2d-variable-density-bernoulli.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/linear-segregated/scalar-advection.i)
- (modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_LinearFV.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/linear_fv_pressure_flux_bc/internal-neighbor.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/porous-baffle-1d.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/pressure-drop-advection.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/cht/bulk_heat_transfer/flow-around-square-linear-fluidonly.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/3d/3d-velocity-pressure.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/SIMPLEC/2d/2d-velocity-pressure.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/segregated-comparison/segregated-linear.i)
- (test/tests/linearfvbcs/robin/advection-1d-robin.i)
- (test/tests/linearfvkernels/advection/advection-1d.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated-transient/channel_ERCOFTAC.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d-symmetric/channel.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/reconstructed-force-channel.i)
- (test/tests/linearfvkernels/advection/diagonal-step-2d.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC_mu_eff.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/cht/conjugate_heat_transfer/cht_rob-rob.i)
- (test/tests/linearfvkernels/block-restriction/block-restricted-adr.i)
- (modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/segregated/channel-drift-flux.i)
- (test/tests/linearfvkernels/diffusion-reaction-advection/advection-diffusion-reaction-2d.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/turbulence/bfs/linear-segregated/BFS_ERCOFTAC.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/cht/conjugate_heat_transfer/cht_neu-dir.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/form-loss-orientation.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/linear-segregated/reconstructed-gradient.i)
use_two_term_expansion
Default:False
C++ Type:bool
Controllable:No
Description:If an approximate linear expansion should be used to compute the face value.
use_two_term_expansion
Default:False
C++ Type:bool
Controllable:No
Description:If an approximate linear expansion should be used to compute the face value.
(test/tests/linearfvkernels/advection/advection-2d.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny= 1
ymax = 0.5
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[average]
type = FVGeometricAverage
[]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
deferred_correction_factor = 1.0
[]
[nvd_vanleer]
type = FVAdvectedVanLeerWeightBased
blending_factor = 1.0
[]
[nvd_minmod]
type = FVAdvectedMinmodWeightBased
blending_factor = 1.0
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.5 0 0"
advected_interp_method_name = upwind
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
[inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left top bottom"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = false
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = '0.5*pi*sin(2*y*pi)*cos(x*pi)'
[]
[analytic_solution]
type = ParsedFunction
expression = 'sin(x*pi)*sin(2*y*pi) + 1.5'
[]
[]
[Postprocessors]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -pc_factor_mat_solver_type -mat_mumps_icntl_14'
petsc_options_value = 'lu NONZERO 1e-12 mumps 50'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/cht/bulk_heat_transfer/flow-around-square-linear.i)
mu = 0.01
rho = 1.1
k = 0.0005
cp = 10
k_s = 3.0
h_conv = 5
power_density = 10000
advected_interp_method = 'upwind'
[Mesh]
[generated_mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
xmin = 0
ymin = 0
ymax = 0.1
xmax = 0.1
[]
[subdomain1]
type = SubdomainBoundingBoxGenerator
input = generated_mesh
block_name = subdomain1
bottom_left = '0.04 0.04 0'
block_id = 1
top_right = '0.06 0.06 0'
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = subdomain1
primary_block = 0
paired_block = 1
new_boundary = interface
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system solid_energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = 0
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.1
solver_sys = u_system
block = 0
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.01
block = 0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
block = 0
[]
[T_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 300
block = 0
[]
[T_solid]
type = MooseLinearVariableFVReal
solver_sys = solid_energy_system
initial_condition = 500
block = 1
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = true
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = true
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = true
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T_fluid
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T_fluid
diffusion_coeff = ${k}
use_nonorthogonal_correction = true
[]
[solid-conduction]
type = LinearFVDiffusion
variable = T_solid
diffusion_coeff = ${k_s}
use_nonorthogonal_correction = true
[]
[solid-source]
type = LinearFVSource
variable = T_solid
source_density = ${power_density}
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '0.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom interface'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom interface'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_fluid
functor = 300
boundary = 'left'
[]
[walls_T]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = T_fluid
functor = 0.0
boundary = 'top bottom'
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T_fluid
use_two_term_expansion = false
boundary = right
[]
[fluid_solid]
type = LinearFVConvectiveHeatTransferBC
variable = T_fluid
T_solid = T_solid
T_fluid = T_fluid
boundary = interface
h = ${h_conv}
[]
[solid_fluid]
type = LinearFVConvectiveHeatTransferBC
variable = T_solid
T_solid = T_solid
T_fluid = T_fluid
boundary = interface
h = ${h_conv}
[]
[]
[FunctorMaterials]
[rhocpT]
property_name = 'rhocpT'
type = ParsedFunctorMaterial
functor_names = 'T_fluid'
expression = '${rho}*${cp}*T_fluid'
[]
[]
[Postprocessors]
[h_in]
type = VolumetricFlowRate
boundary = left
vel_x = vel_x
vel_y = vel_y
rhie_chow_user_object = rc
advected_quantity = 'rhocpT'
subtract_mesh_velocity = false
[]
[h_out]
type = VolumetricFlowRate
boundary = right
vel_x = vel_x
vel_y = vel_y
rhie_chow_user_object = rc
advected_quantity = 'rhocpT'
advected_interp_method = upwind
subtract_mesh_velocity = false
[]
[power]
type = ElementIntegralFunctorPostprocessor
functor = ${power_density}
block = 1
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-13
pressure_l_abs_tol = 1e-13
energy_l_abs_tol = 1e-13
solid_energy_l_abs_tol = 1e-13
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
solid_energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
solid_energy_system = 'solid_energy_system'
momentum_equation_relaxation = 0.8
energy_equation_relaxation = 1.0
pressure_variable_relaxation = 0.3
num_iterations = 1000
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
energy_absolute_tolerance = 1e-10
solid_energy_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
solid_energy_petsc_options_iname = '-pc_type -pc_hypre_type'
solid_energy_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = timestep_end
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/2d-boussinesq.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
cp = 300
k = 20
alpha_b = 1e-4
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1.'
dy = '0.2'
ix = '10'
iy = '5'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[T]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 300
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[u_boussinesq]
type = LinearFVMomentumBoussinesq
variable = vel_x
rho = ${rho}
gravity = '0 -9.81 0'
alpha_name = ${alpha_b}
ref_temperature = 300.0
T_fluid = T
momentum_component = 'x'
[]
[v_boussinesq]
type = LinearFVMomentumBoussinesq
variable = vel_y
rho = ${rho}
gravity = '0 -9.81 0'
alpha_name = ${alpha_b}
ref_temperature = 300.0
T_fluid = T
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T
diffusion_coeff = ${k}
use_nonorthogonal_correction = false
[]
[]
[FunctorMaterials]
[constant_functors]
type = GenericFunctorMaterial
prop_names = 'cp alpha_b'
prop_values = '${cp} ${alpha_b}'
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_top_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
functor = ${fparse 300.0}
boundary = 'left top'
[]
[bottom_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
functor = ${fparse 350.0}
boundary = bottom
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
energy_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.8
energy_equation_relaxation = 0.9
pressure_variable_relaxation = 0.3
num_iterations = 200
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
energy_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy.i)
# Steady conjugate heat transfer from a heated solid to fluid in a 0.5-m porous block.
# The solid fraction scales the 20 MW/m^3 source to 10 MW/m^3. Conservation therefore gives
# u_block_2 = 2, T_fluid_out = 300.59523809524, and h_fluid_out = 1262500.
# For 10 upwind cells, T_fluid_block_2 = 300.32738095238. The local balance gives
# T_solid_block_2 - T_fluid_block_2 = 10e6 / 30000 = 333.33333333333,
# hence T_solid_block_2 = 633.66071428571.
mu = 2e-3
rho = 1000
advected_interp_method = 'upwind'
u_in = 2
forchheimer = 0
bf = '0 0'
cp_fluid = 4200
cp_solid = 500
k_fluid = 0.4
k_solid = 0.2
h_vol = 30000
q_solid = 20000000
T_inlet = 300
T_initial = 300
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
dy = '0.5'
ix = '10 10 10'
iy = '3'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle2
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system solid_energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
form_loss = ${bf}
reference_velocity_side = 'lower_porosity higher_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[h_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = '${fparse cp_fluid * T_initial}'
[]
[T_solid]
type = MooseLinearVariableFVReal
solver_sys = solid_energy_system
initial_condition = ${T_initial}
block = 2
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[fluid_advection]
type = LinearFVEnergyAdvection
variable = h_fluid
advected_quantity = enthalpy
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = rc
[]
[fluid_diffusion]
type = LinearFVDiffusion
variable = h_fluid
diffusion_coeff = kappa_fluid
use_nonorthogonal_correction = false
[]
[fluid_exchange]
type = LinearFVEnthalpyVolumetricHeatTransfer
variable = h_fluid
h_solid_fluid = h_vol
cp = cp_fluid
T_fluid = T_fluid
T_solid = T_solid
is_solid = false
block = 2
[]
[fluid_source]
type = LinearFVSource
variable = h_fluid
source_density = q_fluid_scaled
[]
[solid_diffusion]
type = LinearFVDiffusion
variable = T_solid
diffusion_coeff = ${k_solid}
use_nonorthogonal_correction = false
block = 2
[]
[solid_exchange]
type = LinearFVEnthalpyVolumetricHeatTransfer
variable = T_solid
h_solid_fluid = h_vol
cp = 1.0
T_fluid = T_fluid
T_solid = T_solid
is_solid = true
block = 2
[]
[solid_source]
type = LinearFVSource
variable = T_solid
source_density = q_solid_scaled
block = 2
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_3 bottom_to_1 bottom_to_3 top_to_2 bottom_to_2'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_3 bottom_to_1 bottom_to_3 top_to_2 bottom_to_2'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[pressure-extrapolation]
type = LinearFVPressureFluxBC
boundary = 'bottom_to_1 bottom_to_2 bottom_to_3 top_to_1 top_to_2 top_to_3'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[left_T_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = T_fluid
functor = ${T_inlet}
[]
[left_h_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = h_fluid
functor = h_from_p_T
[]
[walls_h_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'top_to_1 top_to_2 top_to_3 bottom_to_1 bottom_to_2 bottom_to_3'
variable = h_fluid
functor = 0.0
diffusion_coeff = kappa_fluid
[]
[outlet_h_fluid]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = h_fluid
use_two_term_expansion = false
[]
[solid_zero_flux]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'baffle baffle2 top_to_2 bottom_to_2'
variable = T_solid
functor = 0.0
diffusion_coeff = kappa_solid
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer} ${forchheimer} ${forchheimer}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 1.0 2 0.5 3 1.0'
[]
[fluid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_fluid kappa_fluid h_vol q_fluid_scaled'
prop_values = '${cp_fluid} ${fparse k_fluid/cp_fluid} ${h_vol} 0'
[]
[solid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_solid kappa_solid'
prop_values = '${cp_solid} ${fparse k_solid/cp_solid}'
[]
[q_solid]
type = GenericFunctorMaterial
prop_names = 'q_solid'
prop_values = ${q_solid}
block = 2
[]
[q_solid_scaled]
type = ParsedFunctorMaterial
property_name = q_solid_scaled
functor_names = 'porosity q_solid'
expression = '(1 - porosity) * q_solid'
block = 2
[]
[fluid_enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = pressure
T_fluid = T_fluid
h = h_fluid
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = h_from_p_T_functor
functor_names = 'T_fluid'
expression = '${cp_fluid} * T_fluid'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = T_from_p_h_functor
functor_names = 'h_fluid'
expression = 'h_fluid / ${cp_fluid}'
[]
[]
[Postprocessors]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[T_fluid_out]
type = SideAverageValue
variable = T_fluid
boundary = right
[]
[T_fluid_block_2]
type = ElementAverageValue
variable = T_fluid
block = 2
[]
[T_solid_block_2]
type = ElementAverageValue
variable = T_solid
block = 2
[]
[h_fluid_out]
type = SideAverageValue
variable = h_fluid
boundary = right
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[T_fluid]
type = MooseLinearVariableFVReal
initial_condition = ${T_initial}
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'NONLINEAR'
[]
[fluid_temperature]
type = FunctorAux
variable = T_fluid
functor = T_from_p_h
execute_on = 'NONLINEAR'
[]
[]
[VectorPostprocessors]
# Sample each x-cell once at its center.
[centerline]
type = LineValueSampler
variable = 'superficial_u T_fluid T_solid'
start_point = '0.0119047619047619 0.25 0'
end_point = '1.4880952380952381 0.25 0'
num_points = 30
sort_by = x
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
solid_energy_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
solid_energy_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
energy_system = energy_system
solid_energy_system = solid_energy_system
momentum_equation_relaxation = 0.2
pressure_variable_relaxation = 0.1
energy_equation_relaxation = 0.8
num_iterations = 1000
# These outer tolerances stop once the velocity and zero-pressure fields have stabilized to
# substantially below the accuracy exercised by the temperature and velocity profile checks.
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-2
energy_absolute_tolerance = 1e-8
solid_energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
solid_energy_petsc_options_iname = '-pc_type -pc_hypre_type'
solid_energy_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/bfs/linear-segregated-transient/BFS_ERCOFTAC.i)
Re = 5100
rho = 1.0
bulk_u = 1.0
H = 1.0
mu = '${fparse rho * bulk_u * H / Re}'
advected_interp_method = 'upwind'
### k-epsilon Closure Parameters ###
sigma_k = 1.0
sigma_eps = 1.3
C1_eps = 1.44
C2_eps = 1.92
C_mu = 0.09
### Initial and Boundary Conditions ###
intensity = 0.01
k_init = '${fparse 1.5*(intensity * bulk_u)^2}'
eps_init = '${fparse C_mu^0.75 * k_init^1.5 / H}'
### Modeling parameters ###
bulk_wall_treatment = false
walls = 'bottom wall-side top'
wall_treatment = 'neq' # Options: eq_newton, eq_incremental, eq_linearized, neq
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${fparse 10.0*H} ${fparse 20.0*H}'
dy = '${H} ${fparse 5*H}'
ix = '8 16'
iy = '2 8'
subdomain_id = '
2 1
1 1
'
[]
[corner_walls]
type = SideSetsBetweenSubdomainsGenerator
input = gen
primary_block ='1'
paired_block ='2'
new_boundary = 'wall-side'
[]
[delete_bottom]
type = BlockDeletionGenerator
input = corner_walls
block ='2'
[]
# Prevent test diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_time]
type = LinearFVTimeDerivative
variable = vel_x
factor = ${rho}
[]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_diffusion]
type = LinearFVDiffusion
variable = vel_x
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_time]
type = LinearFVTimeDerivative
variable = vel_y
factor = ${rho}
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_diffusion]
type = LinearFVDiffusion
variable = vel_y
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_time]
type = LinearFVTurbulentTimeDerivative
variable = TKE
factor = ${rho}
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_time]
type = LinearFVTurbulentTimeDerivative
variable = TKED
factor = ${rho}
walls = ${walls}
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${walls}
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${walls}
variable = vel_y
functor = 0.0
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = ${walls}
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[yplus]
type = MooseLinearVariableFVReal
[]
[mu_eff]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init + mu}'
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[compute_y_plus]
type = RANSYPlusAux
variable = yplus
tke = TKE
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
[]
[compute_mu_eff]
type = ParsedAux
variable = 'mu_eff'
coupled_variables = 'mu_t'
expression = 'mu_t + ${mu}'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = PIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
turbulence_equation_relaxation = '0.5 0.5'
# Only partially converge each time step, we are marching to steady state
num_iterations = 20
# Tight enough that late time steps keep iterating instead of stopping at the
# first iteration while the solution is still drifting toward steady state
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
turbulence_absolute_tolerance = '1e-10 1e-10'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
num_steps = 12
# Ramp up the time step to march to steady state
[TimeStepper]
type = FunctionDT
function = 'min(10 + 2 * t, 2000)'
[]
num_piso_iterations = 2
[]
[Outputs]
[csv]
type = CSV
file_base = 'BFS_ERCOFTAC_out'
# Only the steady state at the final time is checked
execute_on = 'FINAL'
create_final_symlink = true
[]
[]
[VectorPostprocessors]
[side_bottom]
type = SideValueSampler
boundary = 'bottom'
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[side_top]
type = SideValueSampler
boundary = 'top'
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_entry_channel_wall]
type = LineValueSampler
start_point = '${fparse 0.5 * H} ${fparse 1.00001 * H} 0'
end_point = '${fparse 29.5 * H} ${fparse 1.00001 * H} 0'
num_points = 24
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_quarter_entry_channel]
type = LineValueSampler
start_point = '${fparse 0.5 * H} ${fparse 2.25001 * H} 0'
end_point = '${fparse 29.5 * H} ${fparse 2.25001 * H} 0'
num_points = 24
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/steady-transient-compare/common-blocks.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
cp = 300
k = 20
alpha_b = 1e-4
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1.'
dy = '0.2'
ix = '10'
iy = '5'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[T]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 300
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[u_boussinesq]
type = LinearFVMomentumBoussinesq
variable = vel_x
rho = ${rho}
gravity = '0 -9.81 0'
alpha_name = ${alpha_b}
ref_temperature = 300.0
T_fluid = T
momentum_component = 'x'
[]
[v_boussinesq]
type = LinearFVMomentumBoussinesq
variable = vel_y
rho = ${rho}
gravity = '0 -9.81 0'
alpha_name = ${alpha_b}
ref_temperature = 300.0
T_fluid = T
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T
diffusion_coeff = ${k}
use_nonorthogonal_correction = false
[]
[]
[FunctorMaterials]
[constant_functors]
type = GenericFunctorMaterial
prop_names = 'cp alpha_b'
prop_values = '${cp} ${alpha_b}'
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_top_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
functor = ${fparse 300.0}
boundary = 'left top'
[]
[bottom_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
functor = ${fparse 350.0}
boundary = bottom
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T
use_two_term_expansion = false
boundary = right
[]
[]
[Outputs]
exodus = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d-heated/fluid.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'upwind'
cp = 1000
k = 1
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.25 0.25'
dy = '0.2'
ix = '5 5'
iy = '5'
subdomain_id = '0 1'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[T_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 300
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T_fluid
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T_fluid
diffusion_coeff = ${k}
use_nonorthogonal_correction = false
[]
[heat_exchange]
type = LinearFVVolumetricHeatTransfer
variable = T_fluid
h_solid_fluid = 100
T_fluid = T_fluid
T_solid = T_solid
is_solid = false
block = 1
[]
[]
[FunctorMaterials]
[constant_functors]
type = GenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_wall_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_fluid
functor = 300
boundary = 'left top bottom'
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T_fluid
use_two_term_expansion = false
boundary = right
[]
[]
[AuxVariables]
[T_solid]
type = MooseLinearVariableFVReal
initial_condition = 300
block = 1
[]
[]
[MultiApps]
inactive = 'solid'
[solid]
type = FullSolveMultiApp
input_files = solid.i
execute_on = timestep_begin
no_restore = true
[]
[]
[Transfers]
inactive = 'from_solid to_solid'
[from_solid]
type = MultiAppGeneralFieldShapeEvaluationTransfer
from_multi_app = solid
source_variable = 'T_solid'
variable = 'T_solid'
execute_on = timestep_begin
from_blocks = 1
[]
[to_solid]
type = MultiAppGeneralFieldShapeEvaluationTransfer
to_multi_app = solid
source_variable = 'T_fluid'
variable = 'T_fluid'
execute_on = timestep_begin
to_blocks = 1
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-13
pressure_l_abs_tol = 1e-13
energy_l_abs_tol = 1e-13
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.8
energy_equation_relaxation = 0.9
pressure_variable_relaxation = 0.3
num_iterations = 20
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
energy_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = timestep_end
[]
(test/tests/variables/linearfv/shared-gradient-method.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
nx = 4
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
gradient_method = gg
[]
[v]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
gradient_method = gg
[]
[]
[FVGradientMethods]
[gg]
type = FVGreenGaussGradient
[]
[]
[FVInterpolationMethods]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
gradient_method = gg
deferred_correction_factor = 1.0
[]
[]
[LinearFVKernels]
[advection_u]
type = LinearFVAdvection
variable = u
velocity = "1 0 0"
advected_interp_method_name = muscl
[]
[source_u]
type = LinearFVSource
variable = u
source_density = source_func
[]
[advection_v]
type = LinearFVAdvection
variable = v
velocity = "1 0 0"
advected_interp_method_name = muscl
[]
[source_v]
type = LinearFVSource
variable = v
source_density = source_func
[]
[]
[LinearFVBCs]
[inflow_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left"
functor = analytic_solution
[]
[outflow_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = false
[]
[inflow_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = v
boundary = "left"
functor = analytic_solution
[]
[outflow_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = v
boundary = "right"
use_two_term_expansion = false
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = x
[]
[analytic_solution]
type = ParsedFunction
expression = '0.5+0.5*x*x'
[]
[]
[Postprocessors]
[error_u]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[error_v]
type = ElementL2FunctorError
approximate = v
exact = analytic_solution
execute_on = FINAL
[]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 8
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point = true
multi_system_fixed_point_convergence = linear
multi_system_fixed_point_relaxation_factor = 1.0
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -pc_factor_mat_solver_type -mat_mumps_icntl_14'
petsc_options_value = 'lu NONZERO 1e-12 mumps 50'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/SIMPLEC/3d/3d-velocity-pressure.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 3
dx = '1.0'
dy = '0.3'
dz = '0.3'
ix = '10'
iy = '3'
iz = '3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system w_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
w = vel_z
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
pressure_projection_method = consistent
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[vel_z]
type = MooseLinearVariableFVReal
solver_sys = w_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
w = vel_z
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
w = vel_z
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[w_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_z
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
w = vel_z
momentum_component = 'z'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[w_pressure]
type = LinearFVMomentumPressure
variable = vel_z
pressure = pressure
momentum_component = 'z'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[inlet-w]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_z
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom back front'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom back front'
variable = vel_y
functor = 0.0
[]
[walls-w]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom back front'
variable = vel_z
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[outlet_w]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_z
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system w_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 1.0
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_agg_nl -pc_hypre_boomeramg_agg_num_paths -pc_hypre_boomeramg_truncfactor -pc_hypre_boomeramg_strong_threshold -pc_hypre_boomeramg_coarsen_type -pc_hypre_boomeramg_interp_type'
momentum_petsc_options_value = 'hypre boomeramg 4 1 0.1 0.6 HMIS ext+i'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_agg_nl -pc_hypre_boomeramg_agg_num_paths -pc_hypre_boomeramg_truncfactor -pc_hypre_boomeramg_strong_threshold -pc_hypre_boomeramg_coarsen_type -pc_hypre_boomeramg_interp_type'
pressure_petsc_options_value = 'hypre boomeramg 2 1 0.1 0.6 HMIS ext+i'
print_fields = false
[]
[Outputs]
exodus = true
[]
(test/tests/linearfvkernels/advection/diagonal-step-2d-delaunay.i)
[Mesh]
[file_mesh]
type = FileMeshGenerator
file = diagonal-step-2d-delaunay_in.e
[]
# Prevent test diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 0.5
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[average]
type = FVGeometricAverage
[]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
deferred_correction_factor = 1.0
[]
[nvd_vanleer]
type = FVAdvectedVanLeerWeightBased
blending_factor = 0.75
[]
[nvd_minmod]
type = FVAdvectedMinmodWeightBased
blending_factor = 0.75
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "1 1 0"
advected_interp_method_name = muscl
[]
[]
[LinearFVBCs]
[left_inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = left
functor = 0.5
[]
[bottom_inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = bottom
functor = 1
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = 'right top'
use_two_term_expansion = false
[]
[]
[VectorPostprocessors]
[diag_sample]
type = LineValueSampler
variable = u
start_point = '1.0 0 0'
end_point = '0 1.0 0'
num_points = 101
sort_by = id
warn_discontinuous_face_values = false
execute_on = TIMESTEP_END
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 200
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-12
multi_system_fixed_point = true
multi_system_fixed_point_convergence = linear
multi_system_fixed_point_relaxation_factor = 0.3
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -pc_factor_mat_solver_type -mat_mumps_icntl_14'
petsc_options_value = 'lu NONZERO 1e-12 mumps 50'
[]
[Outputs]
csv = true
exodus = true
execute_on = TIMESTEP_END
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/enthalpy_equation.i)
H = 0.015 #halfwidth of the channel, 10 cm of channel height
L = 1
bulk_u = 0.01
p_ref = 101325.0
advected_interp_method = 'upwind'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${L}
ymin = -${H}
ymax = ${H}
nx = 30
ny = 15
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 44000 # 1900 is an approx of cp(T)
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 777.
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
advected_interp_method_name = ${advected_interp_method}
rhie_chow_user_object = 'rc'
u = vel_x
v = vel_y
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
mu = 'mu'
momentum_component = 'y'
use_nonorthogonal_correction = false
advected_interp_method_name = ${advected_interp_method}
rhie_chow_user_object = 'rc'
u = vel_x
v = vel_y
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_conduction]
type = LinearFVDiffusion
diffusion_coeff = 'alpha'
variable = h
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = 0
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = h_from_p_T # ${fparse 1900.*860.}
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = 860.
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = vel_x
boundary = 'top bottom'
functor = 0.
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = vel_y
boundary = 'top bottom'
functor = 0.
[]
[walls_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'top bottom'
functor = h_from_p_T # ${fparse 1900. * 950}
[]
[walls_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'top bottom'
functor = 950.
[]
[walls_p]
type = LinearFVExtrapolatedPressureBC
boundary = 'top bottom'
variable = pressure
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[FluidProperties]
[lead]
type = LeadFluidProperties
[]
[]
[FunctorMaterials]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = lead
pressure = ${p_ref}
T_fluid = 'T'
speed = 1
porosity = 1
characteristic_length = 1
[]
[alpha]
type = ADParsedFunctorMaterial
property_name = 'alpha'
functor_names = 'k cp'
expression = 'k/cp'
[]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
fp = lead
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-6
pressure_l_abs_tol = 1e-6
energy_l_abs_tol = 1e-8
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.9
num_iterations = 200
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-6
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 1000
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = 'TIMESTEP_BEGIN FINAL'
[out]
type = Checkpoint
execute_on = 'TIMESTEP_END'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/rotated-channel.i)
mu = 1
rho = 1
advected_interp_method = 'average'
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
xmax = 5
nx = 20
ny = 4
[]
[transform]
type = TransformGenerator
transform = rotate
vector_value = '45 0 0'
input = mesh
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVNormalVelocityFunctorDirichletBC
boundary = 'left'
variable = vel_x
normal_velocity = '-1'
component = 'x'
[]
[inlet-v]
type = LinearFVNormalVelocityFunctorDirichletBC
boundary = 'left'
variable = vel_y
normal_velocity = '-1'
component = 'y'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/momentum-pressure-block-restricted.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
[Mesh]
[flow]
type = CartesianMeshGenerator
dim = 2
dx = '0.15 0.15'
dy = '0.3'
ix = '3 3'
iy = '3'
subdomain_id = '0 1'
[]
[outside]
type = GeneratedMeshGenerator
dim = 2
nx = 1
ny = 1
xmin = 2
xmax = 3
ymin = 2
ymax = 3
[]
[outside_block]
type = SubdomainIDGenerator
input = outside
subdomain_id = 2
[]
[mesh]
type = MeshCollectionGenerator
inputs = 'flow outside_block'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = '0 1'
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[]
[FVGradientMethods]
[gg2]
type = FVGreenGaussGradient
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure_left]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
block = '0 2'
[]
[u_pressure_right]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
block = '1 2'
[]
[v_pressure_left]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
block = '0 2'
[]
[v_pressure_right]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
block = '1 2'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
(test/tests/linearfvkernels/advection/advection-2d.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny= 1
ymax = 0.5
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[average]
type = FVGeometricAverage
[]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
deferred_correction_factor = 1.0
[]
[nvd_vanleer]
type = FVAdvectedVanLeerWeightBased
blending_factor = 1.0
[]
[nvd_minmod]
type = FVAdvectedMinmodWeightBased
blending_factor = 1.0
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.5 0 0"
advected_interp_method_name = upwind
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
[inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left top bottom"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = false
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = '0.5*pi*sin(2*y*pi)*cos(x*pi)'
[]
[analytic_solution]
type = ParsedFunction
expression = 'sin(x*pi)*sin(2*y*pi) + 1.5'
[]
[]
[Postprocessors]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -pc_factor_mat_solver_type -mat_mumps_icntl_14'
petsc_options_value = 'lu NONZERO 1e-12 mumps 50'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(test/tests/linearfvbcs/scalar_symmetry/advection-2d-symmetry.i)
vel_x = -0.1
two_term_bc=true
gradient_method = 'green-gauss'
advected_interp_method = 'average'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = ${fparse pi/3}
ymin = 0
ymax = ${fparse pi/3}
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 0.02
gradient_method = ${gradient_method}
[]
[]
[FVGradientMethods]
[gg]
type = FVGreenGaussGradient
[]
[gg_custom]
type = FVGreenGaussGradient
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
gradient_method = gg_custom
[]
[]
[Functions]
[u_exact]
type = ParsedFunction
expression = 'cos(x)*cos(y)'
[]
[source_fn]
type = ParsedFunction
expression = '-${vel_x}*sin(x)*cos(y)'
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "${vel_x} 0 0"
advected_interp_method_name = ${advected_interp_method}
[]
[source]
type = LinearFVSource
variable = u
source_density = source_fn
[]
[]
[LinearFVBCs]
[symm]
type = LinearFVAdvectionDiffusionScalarSymmetryBC
variable = u
boundary = "bottom"
use_two_term_expansion = ${two_term_bc}
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "left"
use_two_term_expansion = ${two_term_bc}
[]
[dir]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "right top"
functor = u_exact
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = 'TIMESTEP_END'
[]
[error]
type = ElementL2FunctorError
approximate = u
exact = u_exact
execute_on = 'TIMESTEP_END'
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-9
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-10'
multi_system_fixed_point = true
multi_system_fixed_point_convergence = linear
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC-physics.i)
!include header_and_mesh.i
turbulence_advected_interp_method = ${advected_interp_method}
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[Physics]
[NavierStokes]
[FlowSegregated/flow]
velocity_variable = 'vel_x vel_y'
pressure_variable = 'pressure'
# Initial conditions
initial_velocity = '${bulk_u} 0 0'
initial_pressure = '1e-8'
# Material properties
density = ${rho}
dynamic_viscosity = ${mu}
# Boundary conditions
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_functors = '${bulk_u} 0'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip noslip'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_functors = '0'
# Numerical parameters
include_deviatoric_stress = true
orthogonality_correction = false
pressure_two_term_bc_expansion = false
momentum_two_term_bc_expansion = false
momentum_advection_interpolation = ${advected_interp_method}
system_names = 'u_system v_system pressure_system'
# consistency with kernel syntax input, allows to use the same executioner block
rhie_chow_uo_name = 'rc'
[]
[TurbulenceSegregated/k-epsilon]
# Model
turbulence_handling = 'k-epsilon'
tke_name = TKE
tked_name = TKED
system_names = 'TKE_system TKED_system'
initial_tke = ${k_init}
initial_tked = ${eps_init}
# Model parameters
mu_t_ratio_max = 1e20
sigma_k = ${sigma_k}
sigma_eps = ${sigma_eps}
C_pl = 1e10
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
turbulence_walls = ${walls}
wall_treatment_eps = ${wall_treatment}
bulk_wall_treatment = ${bulk_wall_treatment}
tke_advection_interpolation = ${turbulence_advected_interp_method}
tked_advection_interpolation = ${turbulence_advected_interp_method}
use_nonorthogonal_correction = false
[]
[]
[]
# Boundary conditions are not implemented for turbulent quantities at this time
[LinearFVBCs]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[]
!include executioner_regular_channel.i
variables_to_sample = 'vel_x vel_y pressure_over_density TKE TKED'
!include postprocessing.i
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/rz-pipe-channel/porous-baffle-rz.i)
# Axisymmetric pipe version of ../1d-simple-channel/porous-baffle-1d.i: the same axial flow in an
# RZ pipe of radius 0.5 with symmetry conditions on the axis and on the wall (slip), so the
# solution is independent of r and must reproduce the one-dimensional results. The comments below
# are those of the one-dimensional input.
# One-dimensional verification of Bernoulli jumps, porous drag, and form loss.
# Mass conservation gives u_block_1 = u_block_2 = 0.1 and u_block_jump = 0.
# Without drag or form loss, the two pressure jumps (right minus left) are 0.03 and -0.03,
# so p_left = p_right = p_jump = 0. With mu = 1 and Forchheimer = 50, the porous block
# adds a pressure drop of 0.25. A form-loss coefficient of 10 adds 0.4 at each baffle,
# giving p_jump = p_left - p_right = 1.05 and baffle jumps of -0.37 and -0.43.
mu = 0.0 # 1e-2
rho = 2.0
advected_interp_method = 'average'
forchheimer_value = 50
inlet_u = 0.1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
ix = '200 200 200'
dy = '0.5'
iy = '2'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
coord_type = RZ
rz_coord_axis = X
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${inlet_u}
[]
[inlet_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
# The axis (bottom) and the slip wall (top) are both symmetry planes for this flow.
[symmetry_u]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom top'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = 'x'
[]
[symmetry_v]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom top'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = 'y'
[]
[symmetry_p]
type = LinearFVPressureSymmetryBC
boundary = 'bottom top'
variable = pressure
HbyA_flux = HbyA
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer_value} ${forchheimer_value} ${forchheimer_value}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 0.5 2 1.0 3 0.5'
[]
[]
[Postprocessors]
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[p_jump]
type = ParsedPostprocessor
expression = 'p_left - p_right'
pp_names = 'p_left p_right'
[]
# These points are the centers of the cells adjacent to x = 0.5 and x = 1.0. The mesh spacing
# is 0.5 / 200 = 0.0025, so the adjacent centers are offset by half that distance. The radial
# coordinate 0.375 is the center of the outer row of cells.
[p_baffle_1_left]
type = PointValue
variable = pressure
point = '0.49875 0.375 0'
[]
[p_baffle_1_right]
type = PointValue
variable = pressure
point = '0.50125 0.375 0'
[]
[p_baffle_2_left]
type = PointValue
variable = pressure
point = '0.99875 0.375 0'
[]
[p_baffle_2_right]
type = PointValue
variable = pressure
point = '1.00125 0.375 0'
[]
[p_baffle_1_jump]
type = ParsedPostprocessor
expression = 'p_baffle_1_right - p_baffle_1_left'
pp_names = 'p_baffle_1_right p_baffle_1_left'
[]
[p_baffle_2_jump]
type = ParsedPostprocessor
expression = 'p_baffle_2_right - p_baffle_2_left'
pp_names = 'p_baffle_2_right p_baffle_2_left'
[]
[u_block_1]
type = ElementAverageValue
variable = superficial_u
block = 1
[]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[u_block_jump]
type = ParsedPostprocessor
expression = 'u_block_1 - u_block_2'
pp_names = 'u_block_1 u_block_2'
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'timestep_end'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.1
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
# The Forchheimer case plateaus near 1e-2 after pressure and velocity stabilize; 2e-2 stops
# with the total pressure drop within 2e-6 relative to the value after 1000 iterations.
momentum_absolute_tolerance = 2e-2
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC.i)
!include header_and_mesh.i
turbulence_advected_interp_method = ${advected_interp_method}
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[vanLeer]
type = FVAdvectedVanLeerWeightBased
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
# we use mu_eff directly here to be able to have deviatoric term for both mu and mu_t
mu = 'mu_eff'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_eff'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${turbulence_advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${turbulence_advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = 'bottom top'
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[]
[FunctorMaterials]
[compute_mu_eff]
type = FunctorEffectiveDynamicViscosity
property_name = mu_eff
mu = ${mu}
mu_t = mu_t
mu_t_inverse_factor = 1
execute_on = 'ALWAYS'
[]
[]
!include executioner_regular_channel.i
variables_to_sample = 'vel_x vel_y pressure_over_density TKE TKED'
!include postprocessing.i
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_scalars-physics.i)
!include header_and_mesh.i
qs = 5
[Problem]
linear_sys_names = 'u_system v_system pressure_system scalar_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[Physics]
[NavierStokes]
[FlowSegregated/flow]
velocity_variable = 'vel_x vel_y'
pressure_variable = 'pressure'
# Initial conditions
initial_velocity = '${bulk_u} 0 0'
initial_pressure = '1e-8'
# Material properties
density = ${rho}
dynamic_viscosity = ${mu}
# Boundary conditions
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_functors = '${bulk_u} 0'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip noslip'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_functors = '0'
# Numerical parameters
include_deviatoric_stress = true
orthogonality_correction = false
pressure_two_term_bc_expansion = false
momentum_two_term_bc_expansion = false
momentum_advection_interpolation = ${advected_interp_method}
system_names = 'u_system v_system pressure_system'
[]
[ScalarTransportSegregated/scalar]
# turbulence Physics coupling picked up automatically
passive_scalar_names = 'advected_scalar'
passive_scalar_inlet_types = 'fixed-value'
passive_scalar_inlet_functors = '0'
passive_scalar_source = '${qs}'
system_names = 'scalar_system'
[]
[TurbulenceSegregated/k-epsilon]
# Model
turbulence_handling = 'k-epsilon'
tke_name = TKE
tked_name = TKED
system_names = 'TKE_system TKED_system'
scalar_transport_physics = scalar
initial_tke = ${k_init}
initial_tked = ${eps_init}
# Model parameters
mu_t_ratio_max = 1e20
sigma_k = ${sigma_k}
sigma_eps = ${sigma_eps}
C_pl = 1e10
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
Sc_t = 0.9
turbulence_walls = ${walls}
wall_treatment_eps = ${wall_treatment}
bulk_wall_treatment = ${bulk_wall_treatment}
use_nonorthogonal_correction = false
[]
[]
[]
# Boundary conditions are not implemented for turbulent quantities at this time
[LinearFVBCs]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'ins_rhie_chow_interpolator'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
passive_scalar_systems = 'scalar_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
passive_scalar_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
passive_scalar_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
passive_scalar_equation_relaxation = 0.8
turbulence_equation_relaxation = '0.2 0.2'
turbulence_field_relaxation = '0.2 0.2'
num_iterations = 1000
pressure_absolute_tolerance = 1e-12
momentum_absolute_tolerance = 1e-12
passive_scalar_absolute_tolerance = 1e-12
turbulence_absolute_tolerance = '1e-12 1e-12'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
passive_scalar_petsc_options_iname = '-pc_type -pc_hypre_type'
passive_scalar_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
variables_to_sample = 'vel_x vel_y pressure advected_scalar TKE TKED'
!include postprocessing.i
# More postprocessor for scalar conservation analysis
[Postprocessors]
[outlet_scalar]
type = SideAverageValue
boundary = right
variable = advected_scalar
[]
[S_out]
type = VolumetricFlowRate
boundary = 'right'
vel_x = 'vel_x'
vel_y = 'vel_y'
advected_quantity = 'advected_scalar'
rhie_chow_user_object = 'ins_rhie_chow_interpolator'
[]
[balance_percent]
type = ParsedPostprocessor
expression = '100 * (0 - S_out + 2 * ${L} * ${H} * ${qs}) / S_out'
pp_names = 'S_out'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)
L = 30
nx = 600
bulk_u = 0.01
p_ref = 101325.0
T_in = 860.
q_source = 20000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*240.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = ${T_in}
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u}
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[FluidProperties]
[lead]
type = LeadFluidProperties
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
fp = lead
[]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = lead
pressure = ${p_ref}
T_fluid = 'T'
speed = 1
porosity = 1
characteristic_length = 1
[]
[source_func]
type = ADParsedFunctorMaterial
property_name = source_func
functor_names = 'rho'
expression = ${q_source}
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/2d-boussinesq-transient.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
cp = 300
k = 10
alpha_b = 1e-4
pressure_gradient_method = 'green-gauss'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1.'
dy = '0.2'
ix = '10'
iy = '5'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
gradient_method = ${pressure_gradient_method}
[]
[T]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 300
[]
[]
[FVGradientMethods]
[gg]
type = FVGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = green-gauss
gradient_relaxation = 0.1
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_time]
type = LinearFVTimeDerivative
variable = vel_x
factor = ${rho}
[]
[v_time]
type = LinearFVTimeDerivative
variable = vel_y
factor = ${rho}
[]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[u_boussinesq]
type = LinearFVMomentumBoussinesq
variable = vel_x
rho = ${rho}
gravity = '0 -9.81 0'
alpha_name = ${alpha_b}
ref_temperature = 300.0
T_fluid = T
momentum_component = 'x'
[]
[v_boussinesq]
type = LinearFVMomentumBoussinesq
variable = vel_y
rho = ${rho}
gravity = '0 -9.81 0'
alpha_name = ${alpha_b}
ref_temperature = 300.0
T_fluid = T
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_time]
type = LinearFVTimeDerivative
variable = T
factor = ${fparse rho*cp}
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T
diffusion_coeff = ${k}
use_nonorthogonal_correction = false
[]
[]
[FunctorMaterials]
[constant_functors]
type = GenericFunctorMaterial
prop_names = 'cp alpha_b'
prop_values = '${cp} ${alpha_b}'
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_top_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
functor = 300.0
boundary = 'left top'
[]
[bottom_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
functor = wall-temperature
boundary = bottom
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T
use_two_term_expansion = false
boundary = right
[]
[]
[Functions]
[wall-temperature]
type = ParsedFunction
expression = '350 + 50 * sin(6.28*t)'
[]
[]
[VectorPostprocessors]
[line_sample]
type = LineValueSampler
# Sampled at the cell-center x-locations of the row of cells at mid-channel height (dx=1/ix=10
# -> 0.1-wide cells; dy=0.2/iy=5 -> 0.04-tall cells, so y=0.1 is a cell-center row) to avoid
# sampling a piecewise-constant FV variable exactly on a face.
start_point = '0.05 0.1 0'
end_point = '0.95 0.1 0'
num_points = 10
sort_by = x
variable = 'vel_x vel_y pressure T'
execute_on = FINAL
[]
[]
[Executioner]
type = PIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 1e-12
pressure_l_tol = 1e-12
energy_l_tol = 1e-12
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.9
num_iterations = 100
pressure_absolute_tolerance = 1e-11
momentum_absolute_tolerance = 1e-11
energy_absolute_tolerance = 1e-11
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
dt = 0.01
num_steps = 6
num_piso_iterations = 0
[]
[Outputs]
exodus = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC_symmetric.i)
H = 1 #halfwidth of the channel
L = 100
Re = 13700
rho = 1
bulk_u = 1
mu = '${fparse rho * bulk_u * 2 * H / Re}'
advected_interp_method = 'upwind'
### k-epsilon Closure Parameters ###
sigma_k = 1.0
sigma_eps = 1.3
C1_eps = 1.44
C2_eps = 1.92
C_mu = 0.09
### Initial and Boundary Conditions ###
intensity = '${fparse 0.16*Re^(-1./8.)}'
k_init = '${fparse 1.5*(intensity * bulk_u)^2}'
eps_init = '${fparse C_mu^0.75 * k_init^1.5 / (2*H)}'
### Modeling parameters ###
bulk_wall_treatment = false
walls = 'top'
wall_treatment = 'eq_newton' # Options: eq_newton, eq_incremental, eq_linearized, neq
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${L}
ymin = 0
ymax = ${H}
nx = 4
ny = 4
bias_y = 0.7
[]
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_diffusion]
type = LinearFVDiffusion
variable = vel_x
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_diffusion]
type = LinearFVDiffusion
variable = vel_y
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${walls}
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${walls}
variable = vel_y
functor = 0.0
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
variable = vel_x
boundary = 'bottom'
momentum_component = 'x'
u = 'vel_x'
v = 'vel_y'
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
variable = vel_y
boundary = 'bottom'
momentum_component = 'y'
u = 'vel_x'
v = 'vel_y'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[symmetry-p]
type = LinearFVPressureSymmetryBC
variable = pressure
boundary = 'bottom'
HbyA_flux = 'HbyA' # Functor created in the RhieChowMassFlux UO
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = ${walls}
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[yplus]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[compute_y_plus]
type = RANSYPlusAux
variable = yplus
tke = TKE
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
turbulence_equation_relaxation = '0.2 0.2'
turbulence_field_relaxation = '0.2 0.2'
num_iterations = 1000
pressure_absolute_tolerance = 1e-12
momentum_absolute_tolerance = 1e-12
turbulence_absolute_tolerance = '1e-12 1e-12'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
csv = true
execute_on = 'TIMESTEP_END'
[]
[AuxVariables]
[pressure_over_density]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[]
[AuxKernels]
[compute_pressure_over_density]
type = ParsedAux
variable = pressure_over_density
coupled_variables = 'pressure'
expression = 'pressure/${rho}'
[]
[]
[VectorPostprocessors]
[side_top]
type = SideValueSampler
boundary = 'top'
variable = 'vel_x vel_y pressure_over_density TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_center_channel]
type = LineValueSampler
start_point = '${fparse 0.125 * L} ${fparse 0.0001} 0'
end_point = '${fparse 0.875 * L} ${fparse 0.0001} 0'
num_points = ${Mesh/gmg/nx}
variable = 'vel_x vel_y pressure_over_density TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_quarter_radius_channel]
type = LineValueSampler
start_point = '${fparse 0.125 * L} ${fparse 0.5 * H} 0'
end_point = '${fparse 0.875 * L} ${fparse 0.5 * H} 0'
num_points = ${Mesh/gmg/nx}
variable = 'vel_x vel_y pressure_over_density TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-diagonal-baffle/porous-baffle-straight-diagonal.i)
# Straight-channel hydraulic-only porous-baffle showcase.
# Flow enters from the left, crosses a diagonal porous baffle in a straight section,
# and exits to the right through a channel with slip walls.
# The solution should conserve the imposed unit superficial flow, produce positive pressure
# drops across the clean-to-porous, diagonal, and porous-to-clean interfaces, and keep the
# transverse velocity smooth on both sides of the diagonal. The skew geometry and porous drag
# preclude a useful closed-form pressure distribution, so the profiles provide the reference.
inlet_velocity = 1.0
rho = 998.2
mu = 2e-3
mu_zone_2 = ${mu}
eps_zone_1 = 0.5
eps_zone_2 = 0.7
forch_zone_1 = 10
forch_zone_2 = 10
entry_form_loss = 20
corner_form_loss = 20
exit_form_loss = 20
advected_interp_method = 'upwind'
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[clean_inlet_gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 7
ny = 7
xmin = 0
xmax = 1
ymin = 0
ymax = 1
[]
[clean_inlet_id]
type = SubdomainIDGenerator
input = clean_inlet_gmg
subdomain_id = 1
[]
[clean_inlet_block]
type = RenameBlockGenerator
input = clean_inlet_id
old_block = '1'
new_block = 'clean_inlet'
[]
[clean_inlet_boundary]
type = RenameBoundaryGenerator
input = clean_inlet_block
old_boundary = 'bottom right top left'
new_boundary = 'bottom_clean clean_to_porous_tmp top_clean inlet'
[]
[porous_1_patch]
type = TransfiniteMeshGenerator
corners = '1 0 0
1.7 0 0
2.3 1 0
1 1 0'
nx = 8
ny = 8
bottom_type = LINE
top_type = LINE
right_type = LINE
left_type = LINE
[]
[porous_1_id]
type = SubdomainIDGenerator
input = porous_1_patch
subdomain_id = 2
[]
[porous_1_block]
type = RenameBlockGenerator
input = porous_1_id
old_block = '2'
new_block = 'porous_zone_1'
[]
[porous_1_boundary]
type = RenameBoundaryGenerator
input = porous_1_block
old_boundary = 'bottom right top left'
new_boundary = 'bottom_porous diagonal_p_tmp top_porous clean_to_porous_tmp'
[]
[porous_2_patch]
type = TransfiniteMeshGenerator
corners = '2.3 1 0
1.7 0 0
3 0 0
3 1 0'
nx = 8
ny = 8
bottom_type = LINE
top_type = LINE
right_type = LINE
left_type = LINE
[]
[porous_2_id]
type = SubdomainIDGenerator
input = porous_2_patch
subdomain_id = 3
[]
[porous_2_block]
type = RenameBlockGenerator
input = porous_2_id
old_block = '3'
new_block = 'porous_zone_2'
[]
[porous_2_boundary]
type = RenameBoundaryGenerator
input = porous_2_block
old_boundary = 'bottom right top left'
new_boundary = 'diagonal_p_tmp bottom_porous porous_to_clean_tmp top_porous'
[]
[clean_outlet_gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 14
ny = 7
xmin = 3
xmax = 5
ymin = 0
ymax = 1
[]
[clean_outlet_id]
type = SubdomainIDGenerator
input = clean_outlet_gmg
subdomain_id = 4
[]
[clean_outlet_block]
type = RenameBlockGenerator
input = clean_outlet_id
old_block = '4'
new_block = 'clean_outlet'
[]
[clean_outlet_boundary]
type = RenameBoundaryGenerator
input = clean_outlet_block
old_boundary = 'bottom right top left'
new_boundary = 'bottom_clean outlet top_clean porous_to_clean_tmp'
[]
[stitched_mesh]
type = StitchMeshGenerator
inputs = 'clean_inlet_boundary
porous_1_boundary
porous_2_boundary
clean_outlet_boundary'
stitch_boundaries_pairs = 'clean_to_porous_tmp clean_to_porous_tmp;
diagonal_p_tmp diagonal_p_tmp;
porous_to_clean_tmp porous_to_clean_tmp'
clear_stitched_boundary_ids = true
merge_boundaries_with_same_name = true
[]
[clean_to_porous]
type = SideSetsBetweenSubdomainsGenerator
input = stitched_mesh
primary_block = 'clean_inlet'
paired_block = 'porous_zone_1'
new_boundary = 'clean_to_porous'
[]
[diagonal_baffle]
type = SideSetsBetweenSubdomainsGenerator
input = clean_to_porous
primary_block = 'porous_zone_1'
paired_block = 'porous_zone_2'
new_boundary = 'diagonal_baffle'
[]
[porous_to_clean]
type = SideSetsBetweenSubdomainsGenerator
input = diagonal_baffle
primary_block = 'porous_zone_2'
paired_block = 'clean_outlet'
new_boundary = 'porous_to_clean'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'clean_to_porous diagonal_baffle porous_to_clean'
porosity = porosity
density = ${rho}
form_loss = '${entry_form_loss} ${corner_form_loss} ${exit_form_loss}'
reference_velocity_side = 'lower_porosity lower_porosity lower_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_projection_method = consistent
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_velocity}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = dynamic_viscosity
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = dynamic_viscosity
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 'porous_zone_1 porous_zone_2'
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 'porous_zone_1 porous_zone_2'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = true
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = inlet
variable = superficial_u
functor = ${inlet_velocity}
[]
[inlet_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = inlet
variable = superficial_v
functor = 0.0
[]
[pressure-extrapolation]
type = LinearFVExtrapolatedPressureBC
boundary = 'inlet'
variable = pressure
use_two_term_expansion = true
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = outlet
variable = superficial_u
use_two_term_expansion = true
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = outlet
variable = superficial_v
use_two_term_expansion = true
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = outlet
variable = pressure
functor = 0.0
[]
[slip_u]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom_clean top_clean bottom_porous top_porous'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[slip_v]
type = LinearFVVelocitySymmetryBC
boundary = 'bottom_clean top_clean bottom_porous top_porous'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[pressure-split]
type = LinearFVPressureFluxBC
boundary = 'bottom_clean top_clean bottom_porous top_porous'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[]
[FunctorMaterials]
[viscosity_clean_and_zone_1]
type = GenericFunctorMaterial
prop_names = 'dynamic_viscosity'
prop_values = '${mu}'
block = 'clean_inlet porous_zone_1 clean_outlet'
[]
[viscosity_zone_2]
type = GenericFunctorMaterial
prop_names = 'dynamic_viscosity'
prop_values = '${mu_zone_2}'
block = 'porous_zone_2'
[]
[porosity_clean]
type = GenericFunctorMaterial
prop_names = 'porosity'
prop_values = '1.0'
block = 'clean_inlet clean_outlet'
[]
[porosity_zone_1]
type = GenericFunctorMaterial
prop_names = 'porosity'
prop_values = '${eps_zone_1}'
block = 'porous_zone_1'
[]
[porosity_zone_2]
type = GenericFunctorMaterial
prop_names = 'porosity'
prop_values = '${eps_zone_2}'
block = 'porous_zone_2'
[]
[interstitial_tangential_velocity]
# The diagonal baffle runs from (1.7, 0) to (2.3, 1), so its unit tangent is (0.6, 1) / |(0.6, 1)|.
type = ParsedFunctorMaterial
property_name = interstitial_tangential_velocity_functor
functor_names = 'superficial_u superficial_v porosity'
expression = '(0.6 * superficial_u + superficial_v) / (sqrt(1.36) * porosity)'
[]
[forch_zone_1]
type = GenericVectorFunctorMaterial
prop_names = 'forch'
prop_values = '${forch_zone_1} ${fparse forch_zone_1} ${forch_zone_1}'
block = 'porous_zone_1 clean_outlet'
[]
[forch_zone_2]
type = GenericVectorFunctorMaterial
prop_names = 'forch'
prop_values = '${fparse forch_zone_2} ${forch_zone_2} ${forch_zone_2}'
block = 'porous_zone_2 clean_inlet'
[]
[]
[Postprocessors]
[p_inlet]
type = SideAverageValue
variable = pressure
boundary = inlet
[]
[p_outlet]
type = SideAverageValue
variable = pressure
boundary = outlet
[]
[p_total_drop]
type = ParsedPostprocessor
expression = 'p_inlet - p_outlet'
pp_names = 'p_inlet p_outlet'
[]
[p_clean_in]
type = ElementAverageValue
variable = pressure
block = 'clean_inlet'
[]
[p_porous_1]
type = ElementAverageValue
variable = pressure
block = 'porous_zone_1'
[]
[p_porous_2]
type = ElementAverageValue
variable = pressure
block = 'porous_zone_2'
[]
[p_clean_out]
type = ElementAverageValue
variable = pressure
block = 'clean_outlet'
[]
[p_entry_drop]
type = ParsedPostprocessor
expression = 'p_clean_in - p_porous_1'
pp_names = 'p_clean_in p_porous_1'
[]
[p_baffle_drop]
type = ParsedPostprocessor
expression = 'p_porous_1 - p_porous_2'
pp_names = 'p_porous_1 p_porous_2'
[]
[p_exit_drop]
type = ParsedPostprocessor
expression = 'p_porous_2 - p_clean_out'
pp_names = 'p_porous_2 p_clean_out'
[]
[]
[VectorPostprocessors]
# The cells intersected by this horizontal line have uniform width; sample each once.
[horizontal_profile]
type = LineValueSampler
variable = 'pressure superficial_u'
warn_discontinuous_face_values = false
start_point = '0.0714285714285714 0.5 0'
end_point = '3.9285714285714286 0.5 0'
num_points = 28
sort_by = x
[]
# Sample the two cell-center rows adjacent and parallel to the diagonal baffle.
[v_y_left_of_interface]
type = LineValueSampler
variable = superficial_v
warn_discontinuous_face_values = false
start_point = '1.689795918367347 0.0714285714285714 0'
end_point = '2.167346938775510 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[v_y_right_of_interface]
type = LineValueSampler
variable = superficial_v
warn_discontinuous_face_values = false
start_point = '1.832653061224490 0.0714285714285714 0'
end_point = '2.310204081632653 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[ut_left_of_interface]
type = LineValueSampler
variable = interstitial_tangential_velocity
warn_discontinuous_face_values = false
start_point = '1.689795918367347 0.0714285714285714 0'
end_point = '2.167346938775510 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[ut_right_of_interface]
type = LineValueSampler
variable = interstitial_tangential_velocity
warn_discontinuous_face_values = false
start_point = '1.832653061224490 0.0714285714285714 0'
end_point = '2.310204081632653 0.9285714285714286 0'
num_points = 7
sort_by = y
[]
[skew_pressure_profile]
# This skew line intersects cells over unequal distances, so list one interior point per cell.
type = PointValueSampler
variable = pressure
warn_discontinuous_face_values = false
points = '2.0282 0.9437 0
2.0639 0.8722 0
2.1039 0.7922 0
2.1396 0.7208 0
2.1700 0.6600 0
2.2057 0.5885 0
2.2418 0.5165 0
2.2775 0.4451 0
2.3208 0.3584 0
2.3565 0.2869 0
2.3929 0.2143 0
2.4454 0.1092 0
2.4811 0.0377 0'
sort_by = x
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[interstitial_tangential_velocity]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[porosity_display]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = timestep_end
[]
[interstitial_tangential_velocity]
type = FunctorAux
variable = interstitial_tangential_velocity
functor = interstitial_tangential_velocity_functor
execute_on = timestep_end
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.5
pressure_variable_relaxation = 0.2
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
file_base = porous-baffle-straight-diagonal_out
csv = true
execute_on = timestep_end
[]
(test/tests/linearfvkernels/advection/advection-2d-rz.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny= 1
ymax = 0.5
[]
coord_type = RZ
rz_coord_axis = Y
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.0 0.5 0"
advected_interp_method_name = average
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
[inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left right bottom"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "top"
use_two_term_expansion = true
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = '1.0*pi*sin(x*pi)*cos(2*y*pi)'
[]
[analytic_solution]
type = ParsedFunction
expression = 'sin(x*pi)*sin(2*y*pi) + 1.5'
[]
[]
[Postprocessors]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 10
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-10'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_heated-physics.i)
!include header_and_mesh.i
q = 5
cp = 300
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
# These are only needed when solving for enthalpy
# Alternatively, a FluidProperties user object may be used
[FunctorMaterials]
active = 'rho_h'
# These two are for solving for enthalpy without using a FluidProperties object
[h_from_T]
type = ParsedFunctorMaterial
expression = '${cp} * T_fluid'
functor_names = 'T_fluid'
property_name = 'h_from_p_T_functor'
[]
[T_from_h]
type = ParsedFunctorMaterial
expression = 'h / ${cp}'
functor_names = 'h'
property_name = 'T_from_p_h_functor'
[]
# This one is for computing the enthalpy density without using a FluidProperties object
[rho_h]
type = ParsedFunctorMaterial
expression = '${rho} * ${cp} * T_fluid'
functor_names = 'T_fluid'
property_name = 'rho_h'
[]
[]
[Physics]
[NavierStokes]
[FlowSegregated/flow]
velocity_variable = 'vel_x vel_y'
pressure_variable = 'pressure'
# Initial conditions
initial_velocity = '${bulk_u} 0 0'
initial_pressure = '1e-8'
# Material properties
density = ${rho}
dynamic_viscosity = ${mu}
# Boundary conditions
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_functors = '${bulk_u} 0'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip noslip'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_functors = '0'
# Numerical parameters
include_deviatoric_stress = true
orthogonality_correction = false
pressure_two_term_bc_expansion = false
momentum_two_term_bc_expansion = false
momentum_advection_interpolation = ${advected_interp_method}
system_names = 'u_system v_system pressure_system'
[]
[FluidHeatTransferSegregated/energy]
# turbulence Physics coupling picked up automatically
initial_temperature = 0
thermal_conductivity = 1.1
specific_heat = ${cp}
energy_inlet_types = 'fixed-temperature'
energy_inlet_functors = '0'
energy_wall_types = 'heatflux heatflux'
energy_wall_functors = '0 0'
external_heat_source = '${q}'
[]
[TurbulenceSegregated/k-epsilon]
# Model
turbulence_handling = 'k-epsilon'
tke_name = TKE
tked_name = TKED
system_names = 'TKE_system TKED_system'
fluid_heat_transfer_physics = energy
initial_tke = ${k_init}
initial_tked = ${eps_init}
# Model parameters
mu_t_ratio_max = 1e20
sigma_k = ${sigma_k}
sigma_eps = ${sigma_eps}
C_pl = 1e10
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
Pr_t = 0.9
k_eff_t_as_aux_variable = true
turbulence_walls = ${walls}
wall_treatment_eps = ${wall_treatment}
bulk_wall_treatment = ${bulk_wall_treatment}
use_nonorthogonal_correction = false
[]
[]
[]
# Boundary conditions are not implemented for turbulent quantities at this time
[LinearFVBCs]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'ins_rhie_chow_interpolator'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
energy_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.8
turbulence_equation_relaxation = '0.2 0.2'
turbulence_field_relaxation = '0.2 0.2'
num_iterations = 1000
pressure_absolute_tolerance = 1e-12
momentum_absolute_tolerance = 1e-12
energy_absolute_tolerance = 1e-12
turbulence_absolute_tolerance = '1e-12 1e-12'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
variables_to_sample = 'vel_x vel_y pressure T_fluid TKE TKED'
!include postprocessing.i
# More postprocessor for temperature
[Postprocessors]
[outlet_T]
type = SideAverageValue
boundary = right
variable = T_fluid
[]
[Q_out]
type = VolumetricFlowRate
boundary = 'right'
vel_x = 'vel_x'
vel_y = 'vel_y'
advected_quantity = 'rho_h'
rhie_chow_user_object = 'ins_rhie_chow_interpolator'
[]
[balance_percent]
type = ParsedPostprocessor
expression = '100 * (0 - Q_out + 2 * ${L} * ${H} * ${q}) / Q_out'
pp_names = 'Q_out'
[]
[]
(test/tests/linearfvkernels/diffusion-reaction-advection/advection-diffusion-reaction-1d.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
nx = 2
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[diffusion]
type = LinearFVDiffusion
variable = u
diffusion_coeff = diff_coeff_func
use_nonorthogonal_correction = false
[]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.5 0 0"
advected_interp_method_name = average
[]
[reaction]
type = LinearFVReaction
variable = u
coeff = coeff_func
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
inactive = "outflow neumann"
[dir]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left right"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = true
[]
[neumann]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = u
boundary = "left"
functor = analytic_solution_neumann_left
diffusion_coeff = diff_coeff_func
[]
[]
[Functions]
[diff_coeff_func]
type = ParsedFunction
expression = '1+0.5*x'
[]
[coeff_func]
type = ParsedFunction
expression = '1+1/(1+x)'
[]
[source_func]
type = ParsedFunction
expression = '(1+1/(x+1))*(sin(pi/2*x)+1.5)+0.25*pi*pi*(0.5*x+1)*sin(pi/2*x)'
[]
[analytic_solution]
type = ParsedFunction
expression = 'sin(pi/2*x)+1.5'
[]
[analytic_solution_neumann_left]
type = ParsedFunction
expression = '-(1+0.5*x)*cos(pi/2*x)*pi/2'
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_rtol'
petsc_options_value = 'hypre boomeramg 1e-10'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/heated-channel/channel_ERCOFTAC_heated.i)
# Turbulent flow in a heated channel where fluid enters cold and is heated by hot walls.
# Momentum and heat transport are modeled using a k-epsilon turbulence model with
# wall functions for both velocity and temperature.
H = 1 #halfwidth of the channel
L = 100
Re = 13700
rho = 1
bulk_u = 1
mu = '${fparse rho * bulk_u * 2 * H / Re}'
advected_interp_method = 'upwind'
### k-epsilon Closure Parameters ###
sigma_k =1.0
sigma_eps = 1.3
C1_eps = 1.44
C2_eps = 1.92
C_mu = 0.09
### Initial and Boundary Conditions ###
intensity = 0.01
k_init = '${fparse 1.5*(intensity * bulk_u)^2}'
eps_init = '${fparse C_mu^0.75 * k_init^1.5 / (2*H)}'
### Modeling parameters ###
bulk_wall_treatment = false
walls = 'top bottom'
wall_treatment = 'eq_newton' # Options: eq_newton, eq_incremental, eq_linearized, neq
### Energy variables for Pr = 1
temperature_init = 300.
cp = 4000.
k = 0.58
Pr_t = 0.7
[Mesh]
[block_1]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.75 0.25'
ix = '5'
iy = '3 1'
[]
[block_2_base]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.25 0.75'
ix = '5'
iy = '1 3'
[]
[block_2]
type = TransformGenerator
input = block_2_base
transform = TRANSLATE
vector_value = '0 -1 0'
[]
[smg]
type = StitchedMeshGenerator
inputs = 'block_1 block_2'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'bottom top'
merge_boundaries_with_same_name = true
[]
# Prevent sampling diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system energy_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${fparse 3*k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${fparse 3*eps_init}
[]
[temperature]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${temperature_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_diffusion]
type = LinearFVDiffusion
variable = vel_x
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_diffusion]
type = LinearFVDiffusion
variable = vel_y
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 10
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
walls = ${walls}
advected_interp_method_name = ${advected_interp_method}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 10
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = temperature
advected_quantity = temperature
cp = ${cp}
[]
[temp_diffusion]
type = LinearFVDiffusion
variable = temperature
diffusion_coeff = 'k_eff'
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[inlet-temp]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = temperature
functor = '300.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[walls_temp]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = temperature
functor = 400.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[outlet_temp]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = temperature
use_two_term_expansion = false
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = 'bottom top'
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[walls_k_t]
type = LinearFVTemperatureWallFunctionBC
boundary = 'bottom top'
variable = 'k_eff'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
cp = ${cp}
k = ${k}
Pr_t = ${Pr_t}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[yplus]
type = MooseLinearVariableFVReal
[]
[mu_eff]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[k_eff]
type = MooseLinearVariableFVReal
[]
[k_t]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[compute_k_eff]
type = EffectiveTurbulentThermalConductivityAux
variable = k_eff
Pr_t = ${Pr_t}
cp = ${cp}
k = ${k}
mu_t = 'mu_t'
execute_on = 'NONLINEAR'
[]
[compute_y_plus]
type = RANSYPlusAux
variable = yplus
tke = TKE
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
[]
[compute_mu_eff]
type = ParsedAux
variable = 'mu_eff'
coupled_variables = 'mu_t'
expression = 'mu_t + ${mu}'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
turbulence_systems = 'TKE_system TKED_system'
energy_system = 'energy_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
turbulence_l_tol = 1e-14
energy_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
turbulence_equation_relaxation = '0.35 0.35'
turbulence_field_relaxation = '0.35 0.35'
energy_equation_relaxation = 0.95
num_iterations = 4000
pressure_absolute_tolerance = 1e-12
momentum_absolute_tolerance = 1e-12
turbulence_absolute_tolerance = '1e-12 1e-12'
energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
exodus = true
csv = true
[]
# sample along walls and in the bulk
[VectorPostprocessors]
[side_bottom]
type = SideValueSampler
boundary = 'bottom'
variable = 'vel_x vel_y pressure temperature TKE TKED mu_t yplus mu_eff k_eff k_t'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[side_top]
type = SideValueSampler
boundary = 'top'
variable = 'vel_x vel_y pressure temperature TKE TKED mu_t yplus mu_eff k_eff k_t'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_center_channel]
type = LineValueSampler
start_point = '${fparse 0.125 * L} ${fparse 0.0001} 0'
end_point = '${fparse 0.875 * L} ${fparse 0.0001} 0'
num_points = ${Mesh/block_1/ix}
variable = 'vel_x vel_y pressure temperature TKE TKED mu_t yplus mu_eff k_eff k_t'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_quarter_radius_channel]
type = LineValueSampler
start_point = '${fparse 0.125 * L} ${fparse 0.4999 * H} 0'
end_point = '${fparse 0.875 * L} ${fparse 0.4999 * H} 0'
num_points = ${Mesh/block_1/ix}
variable = 'vel_x vel_y pressure temperature TKE TKED mu_t yplus mu_eff k_eff k_t'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[]
(test/tests/linearfvbcs/robin/advection-2d-robin.i)
##################################################################
c = 0.01 # advection velocity (+x direction)
amp = 1.0 # sinusoid amplitude, for u_exact
u0 = 1.2 # any positive constant > 1.0
x_l = ${fparse 0.0*pi}
x_r = ${fparse pi}
y_l = ${fparse 0.0*pi}
y_r = ${fparse 1.0*pi}
alpha = 5.000 # robin BC coeff for gradient term
beta = 2.000 # robin BC coeff for variable term
nx = 2
ny = 2
##################################################################
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = ${nx}
ny = ${ny}
xmin = ${x_l}
xmax = ${x_r}
ymin = ${y_l}
ymax = ${y_r}
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 0.01
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[Functions]
[u_exact]
type = ParsedFunction
expression = '${amp} * (${u0} - cos(x)) * sin(y)'
[]
[source_fn]
type = ParsedFunction
expression = '${fparse c*amp} * sin(x) * sin(y)'
[]
[gamma_fn]
type = ParsedFunction
expression = '(${fparse -amp*alpha}*sin(x)*sin(y)) + (${beta} * u_e)'
symbol_names = 'u_e'
symbol_values = 'u_exact'
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "${c} 0 0"
advected_interp_method_name = average
[]
[source]
type = LinearFVSource
variable = u
source_density = source_fn
[]
[]
[LinearFVBCs]
[rob_l]
type = LinearFVAdvectionDiffusionFunctorRobinBC
variable = u
boundary = "left"
alpha = ${alpha}
beta = ${beta}
gamma = gamma_fn
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = true
[]
[top]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "top"
functor = 0.0
[]
[bottom]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "bottom"
functor = 0.0
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[error]
type = ElementL2FunctorError
approximate = u
exact = u_exact
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 4
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-7
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-10'
linear_convergence = linear
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy-fluid-only.i)
# Steady fluid-only enthalpy transport through a 0.5-m heated porous block.
# With rho = 1000, u = 2, cp = 4200, and q = 20 MW/m^3, conservation gives
# u_block_2 = 2, T_fluid_out = 301.19047619048, and h_fluid_out = 1265000.
# For 10 upwind cells in the heated block, T_fluid_block_2 = 300.65476190476.
mu = 2e-3
rho = 1000
advected_interp_method = 'upwind'
u_in = 2
forchheimer = 0
bf = '0 0'
cp_fluid = 4200
k_fluid = 0.4
h_vol = 300
T_inlet = 300
T_initial = 300
q = 20000000
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
dy = '0.5'
ix = '10 10 10'
iy = '3'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle2
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
form_loss = ${bf}
reference_velocity_side = 'lower_porosity higher_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[h_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = '${fparse cp_fluid * T_initial}'
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[fluid_advection]
type = LinearFVEnergyAdvection
variable = h_fluid
advected_quantity = enthalpy
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = rc
[]
[fluid_diffusion]
type = LinearFVDiffusion
variable = h_fluid
diffusion_coeff = kappa_fluid
use_nonorthogonal_correction = false
[]
[fluid_source]
type = LinearFVSource
variable = h_fluid
source_density = q_fluid_scaled
block = 2
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_2 bottom_to_2 top_to_1 top_to_3 bottom_to_1 bottom_to_3'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_2 bottom_to_2 top_to_1 top_to_3 bottom_to_1 bottom_to_3'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[pressure-extrapolation]
type = LinearFVPressureFluxBC
boundary = 'bottom_to_1 bottom_to_2 bottom_to_3 top_to_1 top_to_2 top_to_3'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[left_T_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = T_fluid
functor = ${T_inlet}
[]
[left_h_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = h_fluid
functor = h_from_p_T
[]
[walls_h_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'top_to_1 top_to_2 top_to_3 bottom_to_1 bottom_to_2 bottom_to_3'
variable = h_fluid
functor = 0.0
diffusion_coeff = kappa_fluid
[]
[outlet_h_fluid]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = h_fluid
use_two_term_expansion = false
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer} ${forchheimer} ${forchheimer}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 1.0 2 0.5 3 1.0'
[]
[fluid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_fluid kappa_fluid h_vol q_fluid_scaled'
prop_values = '${cp_fluid} ${fparse k_fluid/cp_fluid} ${h_vol} ${q}'
[]
[fluid_enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = pressure
T_fluid = T_fluid
h = h_fluid
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = h_from_p_T_functor
functor_names = 'T_fluid'
expression = '${cp_fluid} * T_fluid'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = T_from_p_h_functor
functor_names = 'h_fluid'
expression = 'h_fluid / ${cp_fluid}'
[]
[]
[Postprocessors]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[T_fluid_out]
type = SideAverageValue
variable = T_fluid
boundary = right
[]
[T_fluid_block_2]
type = ElementAverageValue
variable = T_fluid
block = 2
[]
[h_fluid_out]
type = SideAverageValue
variable = h_fluid
boundary = right
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[T_fluid]
type = MooseLinearVariableFVReal
initial_condition = ${T_initial}
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'NONLINEAR'
[]
[fluid_temperature]
type = FunctorAux
variable = T_fluid
functor = T_from_p_h
execute_on = 'NONLINEAR'
[]
[]
[VectorPostprocessors]
# Sample each x-cell once at its center.
[centerline]
type = LineValueSampler
variable = 'superficial_u T_fluid'
start_point = '0.0119047619047619 0.25 0'
end_point = '1.4880952380952381 0.25 0'
num_points = 30
sort_by = x
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
energy_system = energy_system
momentum_equation_relaxation = 0.2
pressure_variable_relaxation = 0.2
energy_equation_relaxation = 0.7
num_iterations = 1000
# These outer tolerances stop once the velocity and zero-pressure fields have stabilized to
# substantially below the accuracy exercised by the temperature and velocity profile checks.
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-2
energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/block-restricted/block-ke.i)
H = 1 #halfwidth of the channel
L = 100
Re = 13700
rho = 1
bulk_u = 1
mu = '${fparse rho * bulk_u * 2 * H / Re}'
advected_interp_method = 'upwind'
### k-epsilon Closure Parameters ###
sigma_k = 1.0
sigma_eps = 1.3
C1_eps = 1.44
C2_eps = 1.92
C_mu = 0.09
### Initial and Boundary Conditions ###
intensity = '${fparse 0.16*Re^(-1./8.)}'
k_init = '${fparse 1.5*(intensity * bulk_u)^2}'
eps_init = '${fparse C_mu^0.75 * k_init^1.5 / (2*H)}'
### Modeling parameters ###
bulk_wall_treatment = false
walls = 'walls'
wall_treatment = 'eq_newton' # Options: eq_newton, eq_incremental, eq_linearized, neq
[Mesh]
[block_left]
type = GeneratedMeshGenerator
dim = 2
xmin = '${fparse -2*H}'
xmax = '${fparse -H}'
ymin = 0
ymax = ${L}
nx = 3
ny = 4
[]
[block_1]
type = GeneratedMeshGenerator
dim = 2
xmin = '${fparse -H}'
xmax = 0
ymin = 0
ymax = ${L}
nx = 4
ny = 4
bias_x = '${fparse 1/0.7}'
[]
[block_2]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${H}
ymin = 0
ymax = ${L}
nx = 4
ny = 4
bias_x = 0.7
[]
[block_right]
type = GeneratedMeshGenerator
dim = 2
xmin = ${H}
xmax = '${fparse 2*H}'
ymin = 0
ymax = ${L}
nx = 3
ny = 4
[]
[smg]
type = StitchedMeshGenerator
inputs = 'block_left block_1 block_2 block_right'
stitch_boundaries_pairs = 'right left; right left; right left'
[]
[middle]
input = smg
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '${fparse -H} 0 0'
top_right = '${H} ${L} 50'
[]
[walls]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 0
new_boundary = walls
input = middle
[]
# Prevent test diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = 1
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.0
solver_sys = u_system
block = 1
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = v_system
block = 1
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
block = 1
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
block = 1
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
block = 1
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_diffusion]
type = LinearFVDiffusion
variable = vel_x
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_diffusion]
type = LinearFVDiffusion
variable = vel_y
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'bottom'
variable = vel_x
functor = 0
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'bottom'
variable = vel_y
functor = '${bulk_u}'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'walls'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'walls'
variable = vel_y
functor = 0.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'top'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'top'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top'
variable = pressure
functor = 0.0
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'bottom'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'top'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'bottom'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'top'
variable = TKED
use_two_term_expansion = false
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = 'walls'
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
block = 1
[]
[yplus]
type = MooseLinearVariableFVReal
block = 1
[]
[mu_eff]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
block = 1
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[compute_y_plus]
type = RANSYPlusAux
variable = yplus
tke = TKE
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
[]
[compute_mu_eff]
type = ParsedAux
variable = 'mu_eff'
coupled_variables = 'mu_t'
expression = 'mu_t + ${mu}'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
turbulence_equation_relaxation = '0.2 0.2'
turbulence_field_relaxation = '0.2 0.2'
num_iterations = 1000
pressure_absolute_tolerance = 1e-12
momentum_absolute_tolerance = 1e-12
turbulence_absolute_tolerance = '1e-12 1e-12'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = timestep_end
csv = true
[]
[VectorPostprocessors]
[line_wall]
type = LineValueSampler
start_point = '${fparse 0.99 * H} ${fparse 0.125 * L} 0'
end_point = '${fparse 0.99 * H} ${fparse 0.875 * L} 0'
num_points = ${Mesh/block_1/nx}
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_center_channel]
type = LineValueSampler
start_point = ' ${fparse 0.0001 * H} ${fparse 0.125 * L} 0'
end_point = '${fparse 0.0001 * H} ${fparse 0.875 * L} 0'
num_points = ${Mesh/block_1/nx}
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_quarter_radius_channel]
type = LineValueSampler
start_point = '${fparse 0.51 * H} ${fparse 0.125 * L} 0'
end_point = '${fparse 0.51 * H} ${fparse 0.875 * L} 0'
num_points = ${Mesh/block_1/nx}
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/errors/pressure-jump-errors.i)
# Compact fixture for constructor and setup errors on pressure-jump objects.
mu = 0.0
rho = 2.0
advected_interp_method = 'average'
inlet_u = 0.1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5 0.5'
ix = '2 2 2'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[]
[Problem]
linear_sys_names = 'u_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
active = 'pressure_jump rc'
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
[]
[duplicate_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle'
porosity = porosity
density = ${rho}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
active = 'u_advection u_pressure p_diffusion HbyA_divergence'
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[ordinary_p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${inlet_u}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 0.5 2 1.0 3 0.5'
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = rc
momentum_systems = 'u_system'
pressure_system = pressure_system
num_iterations = 1
continue_on_max_its = true
[]
[Outputs]
csv = false
exodus = false
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d-scalar/channel.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'upwind'
scalar_advected_interp_method = ${advected_interp_method}
k1 = 0.1
k2 = 0.2
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.25 0.25'
dy = '0.2'
ix = '5 5'
iy = '5'
subdomain_id = '0 1'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system s1_system s2_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[scalar1]
type = MooseLinearVariableFVReal
solver_sys = s1_system
initial_condition = 1.1
[]
[scalar2]
type = MooseLinearVariableFVReal
solver_sys = s2_system
initial_condition = 3
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[vanLeer]
type = FVAdvectedVanLeerWeightBased
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[s1_advection]
type = LinearFVScalarAdvection
variable = scalar1
advected_interp_method_name = ${scalar_advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[s1_diffusion]
type = LinearFVDiffusion
variable = scalar1
diffusion_coeff = ${k1}
use_nonorthogonal_correction = false
[]
[s2_diffusion]
type = LinearFVScalarAdvection
variable = scalar2
advected_interp_method_name = ${scalar_advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[s2_conduction]
type = LinearFVDiffusion
variable = scalar2
diffusion_coeff = ${k2}
use_nonorthogonal_correction = false
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_wall_scalar1]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = scalar1
functor = 1
boundary = 'left'
[]
[outlet_scalar1]
type = LinearFVAdvectionDiffusionOutflowBC
variable = scalar1
use_two_term_expansion = false
boundary = right
[]
[inlet_wall_scalar2]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = scalar2
functor = 2
boundary = 'left'
[]
[outlet_scalar2]
type = LinearFVAdvectionDiffusionOutflowBC
variable = scalar2
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-13
pressure_l_abs_tol = 1e-13
passive_scalar_l_abs_tol = 1e-13
momentum_l_tol = 0
pressure_l_tol = 0
passive_scalar_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
passive_scalar_systems = 's1_system s2_system'
momentum_equation_relaxation = 0.8
passive_scalar_equation_relaxation = '0.9 0.9'
pressure_variable_relaxation = 0.3
# We need to converge the problem to show conservation
num_iterations = 200
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
# The solution being flat, the normalization factor based on fluxes goes to
# 0. The convergence criteria being multiplied by said factor, we won't do any
# better than this. For a non-flat solution, use tighter tolerances
passive_scalar_absolute_tolerance = '1e-2 1e-2'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
passive_scalar_petsc_options_iname = '-pc_type -pc_hypre_type'
passive_scalar_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = timestep_end
hide = 'pressure vel_x vel_y'
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/2d-velocity-pressure.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
pressure_gradient_method = 'green-gauss'
[Mesh]
allow_renumbering = false # Keep IDs stable for the ID-sorted ElementValueSampler output.
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.3'
dy = '0.3'
ix = '3'
iy = '3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
gradient_method = ${pressure_gradient_method}
[]
[]
[FVGradientMethods]
[gg]
type = FVGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = green-gauss
gradient_relaxation = 0.1
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
inactive = 'inlet_and_wall_pressure_flux'
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[inlet_and_wall_pressure_flux]
type = LinearFVPressureFluxBC
boundary = 'left top bottom'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
u = vel_x
v = vel_y
rho = ${rho}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[VectorPostprocessors]
[solution]
type = ElementValueSampler
variable = 'vel_x vel_y pressure'
sort_by = id
execute_on = TIMESTEP_END
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
L = 30
nx = 600
bulk_u = 0.01
q_source = 50000.
A_cp = 976.78
B_cp = 1.0634
T_in = 860.
p_ref = 101325.0
rho = 2000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*1900.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 860.
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = ${q_source}
[]
[T_analytical]
type = ParsedFunction
expression = ${fparse (-A_cp+sqrt(A_cp^2-2*B_cp*(-q_source/rho/bulk_u*L-A_cp*T_in-B_cp/2*T_in*T_in)))/B_cp}
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = 'h_from_p_T_functor'
functor_names = 'T'
expression = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = 'T_from_p_h_functor'
functor_names = 'h'
expression = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[rho]
type = ADParsedFunctorMaterial
property_name = 'rho'
functor_names = 'T'
expression = ${rho}
[]
[cp]
type = ADParsedFunctorMaterial
property_name = 'cp'
functor_names = 'T'
expression = '${A_cp}+${B_cp}*T'
[]
[mu]
type = ADParsedFunctorMaterial
property_name = 'mu'
functor_names = 'T'
expression = '4.5e-3'
[]
[k]
type = ADParsedFunctorMaterial
property_name = 'k'
functor_names = 'T'
expression = 0.7
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[T_out_analytic]
type = FunctionValuePostprocessor
function = T_analytical
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-variable-density/porous-baffle-2d-variable-density-bernoulli.i)
# Manufactured variable-density porous-baffle solution. The exact fields are
# rho = 1 - 0.05 x, rho * superficial_u = 1, porosity = 1 for x < 5 and 0.5
# otherwise, and p_right = 0. The exact pressure solution gives p_left = delta_p =
# 4.99973888889. Its block averages are p_block_1 = 4.84902726575 and
# p_block_2 = 1.51242493694, so p_block_jump = 3.33660232881. The exact velocity
# averages are u_block_1 = 1.15072828981 and u_block_2 = 1.62186043243.
# L2_rho and L2_porosity should be zero; the velocity and pressure errors measure
# discretization of their nonconstant exact profiles.
length_left = 5.0
length_right = 5.0
height = 1.0
nx_left = 30
nx_right = 30
ny = 5
epsilon_left = 1.0
epsilon_right = 0.5
u_in = 1.0
p_out = 0.0
mu = 1e-3
density_factor = 1e-3
density_slope_exact = '${fparse -0.05e3 * density_factor}'
rho_in_exact = '${fparse 1e3 * density_factor}'
mass_flux_exact = '${fparse rho_in_exact * u_in}'
rho_baffle_exact = '${fparse (1e3 - 0.05e3 * length_left) * density_factor}'
rho_out_exact = '${fparse (1e3 - 0.05e3 * (length_left + length_right)) * density_factor}'
u_prime_baffle_exact = '${fparse -mass_flux_exact * density_slope_exact / (rho_baffle_exact * rho_baffle_exact)}'
u_prime_out_exact = '${fparse -mass_flux_exact * density_slope_exact / (rho_out_exact * rho_out_exact)}'
transport_baffle_left_exact = '${fparse mass_flux_exact * mass_flux_exact / (rho_baffle_exact * epsilon_left * epsilon_left) - mu * u_prime_baffle_exact / epsilon_left}'
transport_baffle_right_exact = '${fparse mass_flux_exact * mass_flux_exact / (rho_baffle_exact * epsilon_right * epsilon_right) - mu * u_prime_baffle_exact / epsilon_right}'
transport_out_right_exact = '${fparse mass_flux_exact * mass_flux_exact / (rho_out_exact * epsilon_right * epsilon_right) - mu * u_prime_out_exact / epsilon_right}'
bernoulli_jump_exact = '${fparse 0.5 * mass_flux_exact * mass_flux_exact * (1 / (rho_baffle_exact * epsilon_right * epsilon_right) - 1 / (rho_baffle_exact * epsilon_left * epsilon_left))}'
pressure_right_constant_exact = '${fparse p_out + transport_out_right_exact}'
pressure_left_constant_exact = '${fparse pressure_right_constant_exact - transport_baffle_right_exact + bernoulli_jump_exact + transport_baffle_left_exact}'
advected_interp_method = 'average'
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
# Two blocks are enough for this verification problem: one block on each side of the
# internal porous-baffle interface.
dx = '${length_left} ${length_right}'
dy = '${height}'
ix = '${nx_left} ${nx_right}'
iy = '${ny}'
subdomain_id = '1 2'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = baffle
porosity = porosity
density = rho_aux
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = 'rho_aux'
porosity = 'porosity'
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_out}
gradient_method = jump_aware
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = 'porosity'
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = 'porosity'
pressure = pressure
gradient_method = reconstructed
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[pressure-extrapolation]
type = LinearFVExtrapolatedPressureBC
boundary = 'left'
variable = pressure
use_two_term_expansion = true
[]
# Fix the outlet pressure and leave the outlet velocity free.
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = true
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = true
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = ${p_out}
[]
# Symmetry removes any wall losses and keeps the exact solution one-dimensional.
[symmetry_u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_2 bottom_to_1 bottom_to_2'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry_v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_2 bottom_to_1 bottom_to_2'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[pressure_symmetric]
type = LinearFVPressureSymmetryBC
boundary = 'top_to_1 top_to_2 bottom_to_1 bottom_to_2'
variable = pressure
HbyA_flux = 'HbyA'
[]
[]
[Functions]
[rho]
type = ParsedFunction
expression = '(1e3 - 0.05e3 * x)*${density_factor}'
[]
[]
[FunctorMaterials]
[rho_exact]
type = ParsedFunctorMaterial
property_name = rho_exact
expression = '(1e3 - 0.05e3 * x)*${density_factor}'
[]
[porosity_exact]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity_exact
subdomain_to_prop_value = '1 ${epsilon_left} 2 ${epsilon_right}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 ${epsilon_left} 2 ${epsilon_right}'
[]
[mu]
type = ParsedFunctorMaterial
property_name = mu
expression = '${mu}'
[]
[u_superficial_exact]
type = ParsedFunctorMaterial
property_name = u_superficial_exact
functor_names = 'rho_exact'
expression = '${mass_flux_exact} / rho_exact'
[]
[u_superficial_prime_exact]
type = ParsedFunctorMaterial
property_name = u_superficial_prime_exact
functor_names = 'rho_exact'
expression = '-${mass_flux_exact} * ${density_slope_exact} / (rho_exact * rho_exact)'
[]
[p_exact]
type = ParsedFunctorMaterial
property_name = p_exact
functor_names = 'rho_exact u_superficial_prime_exact'
expression = 'if(x < ${length_left}, ${pressure_left_constant_exact} - ${mass_flux_exact} * ${mass_flux_exact} / (rho_exact * ${epsilon_left} * ${epsilon_left}) + ${mu} * u_superficial_prime_exact / ${epsilon_left}, ${pressure_right_constant_exact} - ${mass_flux_exact} * ${mass_flux_exact} / (rho_exact * ${epsilon_right} * ${epsilon_right}) + ${mu} * u_superficial_prime_exact / ${epsilon_right})'
[]
[]
[AuxVariables]
[rho_aux]
type = MooseLinearVariableFVReal
[]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[assign_rho_aux]
type = FunctorAux
variable = rho_aux
functor = 'rho'
execute_on = 'initial timestep_end'
[]
[assign_porosity_aux]
type = FunctorAux
variable = porosity_aux
functor = 'porosity'
execute_on = 'initial timestep_end'
[]
[]
[Postprocessors]
[L2_rho]
type = ElementL2FunctorError
approximate = rho_aux
exact = rho_exact
[]
[L2_porosity]
type = ElementL2FunctorError
approximate = porosity_aux
exact = porosity_exact
[]
[L2_superficial_u]
type = ElementL2FunctorError
approximate = superficial_u
exact = u_superficial_exact
[]
[L2_pressure]
type = ElementL2FunctorError
approximate = pressure
exact = p_exact
[]
# Overall pressure drop from the solved field.
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[delta_p]
type = ParsedPostprocessor
expression = 'p_left - p_right'
pp_names = 'p_left p_right'
[]
# The block averages give a more direct measure of the interface jump because the exact
# solution is piecewise constant in each block.
[p_block_1]
type = ElementAverageValue
variable = pressure
block = 1
[]
[p_block_2]
type = ElementAverageValue
variable = pressure
block = 2
[]
[p_block_jump]
type = ParsedPostprocessor
expression = 'p_block_1 - p_block_2'
pp_names = 'p_block_1 p_block_2'
[]
# Check the superficial velocities on both sides of the jump.
[u_block_1]
type = ElementAverageValue
variable = superficial_u
block = 1
[]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[]
[VectorPostprocessors]
[centerline_solution]
type = LineValueSampler
variable = 'rho_aux porosity_aux superficial_u pressure'
start_point = '0.0 0.5 0'
end_point = '${fparse length_left + length_right} 0.5 0'
num_points = 50
sort_by = x
execute_on = timestep_end
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-16
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.4
pressure_variable_relaxation = 0.2
num_iterations = 500
pressure_absolute_tolerance = 1e-10
# The exact transverse velocity is zero, so the y-momentum system has a vanishing normalization
# factor and its normalized residual converges slowly without changing the solution. Its
# tolerance is therefore not used as a convergence criterion.
momentum_absolute_tolerance = '1e-10 1'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/linear-segregated/scalar-advection.i)
# Adds a passive scalar on the flow block to reconstructed-gradient.i. The FaceInfo element on
# the internal inlet is the inactive cell, so the advective inflow there is assembled from the
# FaceInfo neighbor. The uniform inflow of 1 must be advected unchanged through the channel.
[Problem]
linear_sys_names = 'u_system v_system pressure_system s_system'
[]
[Variables]
[scalar]
type = MooseLinearVariableFVReal
solver_sys = s_system
initial_condition = 0
block = ${restricted_blocks}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[scalar_advection]
type = LinearFVScalarAdvection
variable = scalar
advected_interp_method_name = upwind
rhie_chow_user_object = rc
[]
[]
[LinearFVBCs]
[inlet-scalar]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = internal_inlet
variable = scalar
functor = 1
[]
[outlet-scalar]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = internal_outlet
variable = scalar
use_two_term_expansion = false
[]
[]
[Functions]
[exact-one]
type = ParsedFunction
expression = 1
[]
[]
[Postprocessors]
[scalar-error]
type = ElementL2FunctorError
approximate = scalar
exact = exact-one
block = ${flow_block}
[]
[]
[Executioner]
passive_scalar_systems = s_system
passive_scalar_equation_relaxation = 1.0
passive_scalar_l_abs_tol = 1e-12
passive_scalar_l_tol = 0
passive_scalar_absolute_tolerance = 1e-10
passive_scalar_petsc_options_iname = '-pc_type'
passive_scalar_petsc_options_value = 'lu'
[]
(modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_LinearFV.i)
mu = 2.6
rho = 1.1
advected_interp_method='average'
pressure_gradient_method = 'green-gauss'
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.3'
dy = '0.3'
ix = '3'
iy = '3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
gradient_method = ${pressure_gradient_method}
[]
[]
[FVGradientMethods]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = green-gauss
gradient_relaxation = 0.1
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Postprocessors]
[inlet_mass]
type = VolumetricFlowRate
boundary = left
rhie_chow_user_object = rc
advected_quantity = ${rho}
vel_x = vel_x
vel_y = vel_y
subtract_mesh_velocity = false
[]
[outlet_mass]
type = VolumetricFlowRate
boundary = right
rhie_chow_user_object = rc
advected_quantity = ${rho}
vel_x = vel_x
vel_y = vel_y
subtract_mesh_velocity = false
[]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/linear_fv_pressure_flux_bc/internal-neighbor.i)
# Unit properties and speed give the exact constant plug-flow solution used by the CSV comparisons.
mu = 1
rho = 1
flow_block = 2
inlet_speed = 1
[Mesh]
[blocks]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '1 2'
iy = '1'
subdomain_id = '1 ${flow_block}'
[]
[internal_inlet]
type = SideSetsBetweenSubdomainsGenerator
input = blocks
primary_block = ${flow_block}
paired_block = 1
new_boundary = internal_inlet
[]
[delete_inlet_block]
type = BlockDeletionGenerator
input = internal_inlet
block = 1
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = ${flow_block}
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${inlet_speed}
solver_sys = u_system
block = ${flow_block}
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
block = ${flow_block}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
block = ${flow_block}
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = average
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = x
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = average
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = y
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = x
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = y
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[prescribed-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'internal_inlet top bottom'
variable = vel_x
functor = ${inlet_speed}
[]
[prescribed-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'internal_inlet top bottom'
variable = vel_y
functor = 0
[]
[pressure-flux]
type = LinearFVPressureFluxBC
boundary = 'internal_inlet top bottom'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
u = vel_x
v = vel_y
rho = ${rho}
[]
[outlet-pressure]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0
[]
[outlet-u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet-v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[Functions]
[exact-u]
type = ParsedFunction
expression = ${inlet_speed}
[]
[exact-zero]
type = ParsedFunction
expression = 0
[]
[]
[Postprocessors]
[inlet-mass-flow]
type = VolumetricFlowRate
boundary = internal_inlet
vel_x = vel_x
vel_y = vel_y
advected_quantity = ${rho}
rhie_chow_user_object = rc
[]
[u-error]
type = ElementL2FunctorError
approximate = vel_x
exact = exact-u
block = ${flow_block}
[]
[v-error]
type = ElementL2FunctorError
approximate = vel_y
exact = exact-zero
block = ${flow_block}
[]
[pressure-error]
type = ElementL2FunctorError
approximate = pressure
exact = exact-zero
block = ${flow_block}
[]
[]
[Executioner]
type = SIMPLE
# Tight algebraic tolerances make the reported errors sensitive to the internal-boundary sign.
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
# These standard SIMPLE relaxation factors provide stable convergence for the tiny test mesh.
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
# Fifty iterations is a conservative cap; the exact initialized solution converges much sooner.
num_iterations = 50
# These nonlinear tolerances keep the final CSV errors below the comparison threshold.
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type'
momentum_petsc_options_value = 'lu'
pressure_petsc_options_iname = '-pc_type'
pressure_petsc_options_value = 'lu'
print_fields = false
[]
[Outputs]
csv = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/porous-baffle-1d.i)
# One-dimensional verification of Bernoulli jumps, porous drag, and form loss.
# Mass conservation gives u_block_1 = u_block_2 = 0.1 and u_block_jump = 0.
# Without drag or form loss, the two pressure jumps (right minus left) are 0.03 and -0.03,
# so p_left = p_right = p_jump = 0. With mu = 1 and Forchheimer = 50, the porous block
# adds a pressure drop of 0.25. A form-loss coefficient of 10 adds 0.4 at each baffle,
# giving p_jump = p_left - p_right = 1.05 and baffle jumps of -0.37 and -0.43.
# Referencing the higher-porosity velocity 0.1 instead of the lower-porosity velocity 0.2 makes the
# form loss 0.1 at that baffle. With reference_velocity_side = 'lower_porosity higher_porosity',
# the baffle jumps are -0.37 and -0.13; with 'higher_porosity lower_porosity', they are -0.07 and
# -0.43. Both give p_jump = 0.75.
mu = 0.0 # 1e-2
rho = 2.0
advected_interp_method = 'average'
forchheimer_value = 50
inlet_u = 0.1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5 0.5'
ix = '200 200 200'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[]
[Problem]
linear_sys_names = 'u_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
momentum_component = 'x'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${inlet_u}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer_value} ${forchheimer_value} ${forchheimer_value}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 0.5 2 1.0 3 0.5'
[]
[]
[Postprocessors]
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[p_jump]
type = ParsedPostprocessor
expression = 'p_left - p_right'
pp_names = 'p_left p_right'
[]
# These points are the centers of the cells adjacent to x = 0.5 and x = 1.0. The mesh spacing
# is 0.5 / 200 = 0.0025, so the adjacent centers are offset by half that distance.
[p_baffle_1_left]
type = PointValue
variable = pressure
point = '0.49875 0 0'
[]
[p_baffle_1_right]
type = PointValue
variable = pressure
point = '0.50125 0 0'
[]
[p_baffle_2_left]
type = PointValue
variable = pressure
point = '0.99875 0 0'
[]
[p_baffle_2_right]
type = PointValue
variable = pressure
point = '1.00125 0 0'
[]
[p_baffle_1_jump]
type = ParsedPostprocessor
expression = 'p_baffle_1_right - p_baffle_1_left'
pp_names = 'p_baffle_1_right p_baffle_1_left'
[]
[p_baffle_2_jump]
type = ParsedPostprocessor
expression = 'p_baffle_2_right - p_baffle_2_left'
pp_names = 'p_baffle_2_right p_baffle_2_left'
[]
[u_block_1]
type = ElementAverageValue
variable = superficial_u
block = 1
[]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[u_block_jump]
type = ParsedPostprocessor
expression = 'u_block_1 - u_block_2'
pp_names = 'u_block_1 u_block_2'
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'timestep_end'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.1
num_iterations = 1000
pressure_absolute_tolerance = 1e-8
# The exact superficial velocity is uniform, so the momentum normalization factor
# sum(|Ax - Ax_avg| + |b - Ax_avg|) nearly vanishes and the normalized momentum residual measures
# round-off. It levels off at a value that depends on the partitioning (near 1e-2 on one process,
# near 1e-1 on three), so only the pressure residual is used as a convergence criterion.
momentum_absolute_tolerance = 1
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/pressure-drop-advection.i)
rho = 1
u_inlet = 1
height = 1
mu = 0.02
nx = 12
ny = 3
advected_interp_method = 'average'
momentum_relaxation = 0.5
pressure_relaxation = 1.0
# Reference pressure drop computed from this input with advected_interp_method = average,
# nx = 192, ny = 48, use_two_term_expansion = true on the velocity outflow and
# pressure extrapolation BCs, and pressure/momentum absolute tolerances of 1e-10. The
# convergence test compares the absolute pressure-drop deviation from this stored
# refined value.
reference_pressure_drop = 0.8386252
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 5
ymin = 0
ymax = ${height}
nx = ${nx}
ny = ${ny}
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
pressure_projection_method = CONSISTENT
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${u_inlet}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = pressure_system
[]
[]
[Functions]
[inlet_u]
type = ParsedFunction
expression = '30 * ${u_inlet} * y^2 * (${height} - y)^2 / ${height}^4'
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[upwind]
type = FVAdvectedUpwind
[]
[vanLeer]
type = FVAdvectedVanLeerWeightBased
[]
[min_mod]
type = FVAdvectedMinmodWeightBased
[]
[venkatakrishnan]
type = FVAdvectedMUSCLDeferredCorrection
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = inlet_u
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = 0
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0
[]
[inlet_p]
type = LinearFVExtrapolatedPressureBC
boundary = 'left'
variable = pressure
use_two_term_expansion = true
[]
[walls_p]
type = LinearFVExtrapolatedPressureBC
boundary = 'top bottom'
variable = pressure
use_two_term_expansion = true
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = true
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = true
boundary = right
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = ${momentum_relaxation}
pressure_variable_relaxation = ${pressure_relaxation}
num_iterations = 2000
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = 'timestep_end'
[]
[pressure_drop]
type = PressureDrop
pressure = pressure
upstream_boundary = 'left'
downstream_boundary = 'right'
boundary = 'left right'
[]
[pressure_drop_deviation]
type = ParsedPostprocessor
expression = 'abs(pressure_drop - ${reference_pressure_drop})'
pp_names = 'pressure_drop'
[]
[]
[Outputs]
exodus = false
csv = true
print_linear_residuals = false
print_nonlinear_residuals = false
[]
(modules/navier_stokes/test/tests/finite_volume/ins/cht/bulk_heat_transfer/flow-around-square-linear-fluidonly.i)
mu = 0.01
rho = 1.1
k = 0.0005
cp = 10
h_conv = 5
advected_interp_method = 'upwind'
[Mesh]
[generated_mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
xmin = 0
ymin = 0
ymax = 0.1
xmax = 0.1
[]
[subdomain1]
type = SubdomainBoundingBoxGenerator
input = generated_mesh
block_name = subdomain1
bottom_left = '0.04 0.04 0'
block_id = 1
top_right = '0.06 0.06 0'
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = subdomain1
primary_block = 0
paired_block = 1
new_boundary = interface
[]
[delete]
type = BlockDeletionGenerator
input = interface
block = 1
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = 0
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.1
solver_sys = u_system
block = 0
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.01
block = 0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
block = 0
[]
[T_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 300
block = 0
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = true
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = true
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = true
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T_fluid
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T_fluid
diffusion_coeff = ${k}
use_nonorthogonal_correction = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '0.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom interface'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom interface'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_fluid
functor = 300
boundary = 'left'
[]
[walls_T]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = T_fluid
functor = 0.0
boundary = 'top bottom'
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T_fluid
use_two_term_expansion = false
boundary = right
[]
[fluid_solid]
type = LinearFVConvectiveHeatTransferBC
variable = T_fluid
T_solid = boundary_value
T_fluid = T_fluid
boundary = interface
h = ${h_conv}
[]
[]
[FunctorMaterials]
[rhocpT]
property_name = 'rhocpT'
type = ParsedFunctorMaterial
functor_names = 'T_fluid'
expression = '${rho}*${cp}*T_fluid'
[]
[]
[Functions]
[boundary_value]
type = ConstantFunction
value = 350
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-13
pressure_l_abs_tol = 1e-13
energy_l_abs_tol = 1e-13
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.8
energy_equation_relaxation = 1.0
pressure_variable_relaxation = 0.3
num_iterations = 1000
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
energy_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = timestep_end
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/3d/3d-velocity-pressure.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 3
dx = '0.3'
dy = '0.3'
dz = '0.3'
ix = '3'
iy = '3'
iz = '3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system w_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
w = vel_z
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[vel_z]
type = MooseLinearVariableFVReal
solver_sys = w_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
w = vel_z
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
w = vel_z
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[w_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_z
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
w = vel_z
momentum_component = 'z'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[w_pressure]
type = LinearFVMomentumPressure
variable = vel_z
pressure = pressure
momentum_component = 'z'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[inlet-w]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_z
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom back front'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom back front'
variable = vel_y
functor = 0.0
[]
[walls-w]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom back front'
variable = vel_z
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[outlet_w]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_z
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system w_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_agg_nl -pc_hypre_boomeramg_agg_num_paths -pc_hypre_boomeramg_truncfactor -pc_hypre_boomeramg_strong_threshold -pc_hypre_boomeramg_coarsen_type -pc_hypre_boomeramg_interp_type'
momentum_petsc_options_value = 'hypre boomeramg 4 1 0.1 0.6 HMIS ext+i'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_agg_nl -pc_hypre_boomeramg_agg_num_paths -pc_hypre_boomeramg_truncfactor -pc_hypre_boomeramg_strong_threshold -pc_hypre_boomeramg_coarsen_type -pc_hypre_boomeramg_interp_type'
pressure_petsc_options_value = 'hypre boomeramg 2 1 0.1 0.6 HMIS ext+i'
print_fields = false
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/SIMPLEC/2d/2d-velocity-pressure.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1.0'
dy = '0.1'
ix = '20'
iy = '3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
pressure_projection_method = consistent
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 1.0
num_iterations = 100
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/segregated-comparison/segregated-linear.i)
mu = 2.6
rho = 1.0
advected_interp_method = 'average'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.3'
dy = '0.3'
ix = '3'
iy = '3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '1.1'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
num_iterations = 2
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
[]
[Outputs]
exodus = true
execute_on = TIMESTEP_END
[]
(test/tests/linearfvbcs/robin/advection-1d-robin.i)
##################################################################
c = 0.1 # advection velocity (+x direction)
amp = 7.0 # sinusoid amplitude, for u_exact
x_l = ${fparse 0.0*pi} # domain bound (left)
x_r = ${fparse pi} # domain bound (right)
alpha = 5.000 # robin BC coeff for gradient term
beta = 2.000 # robin BC coeff for variable term
u0 = 3 # some positive constant for the solution, > 1
gamma = ${fparse (-alpha*amp*sin(x_l)) + beta*amp*(u0 - cos(x_l))} # RHS of Robin BC, applied at left boundary
npts = 2
##################################################################
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
nx = ${npts}
xmin = ${x_l}
xmax = ${x_r}
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 0.0
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[Functions]
[u_exact]
type = ParsedFunction
expression = '${amp}*(${u0} - cos(x))'
[]
[source_fn]
type = ParsedFunction
expression = '${fparse c*amp}*sin(x)'
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "${c} 0 0"
advected_interp_method_name = average
[]
[source]
type = LinearFVSource
variable = u
source_density = source_fn
[]
[]
[LinearFVBCs]
[rob_l]
type = LinearFVAdvectionDiffusionFunctorRobinBC
variable = u
boundary = "left"
alpha = ${alpha}
beta = ${beta}
gamma = ${gamma}
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = true
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[error]
type = ElementL2FunctorError
approximate = u
exact = u_exact
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 4
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-7
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-10'
linear_convergence = linear
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(test/tests/linearfvkernels/advection/advection-1d.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
nx = 2
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[average]
type = FVGeometricAverage
[]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
deferred_correction_factor = 1.0
[]
[nvd_vanleer]
type = FVAdvectedVanLeerWeightBased
blending_factor = 1.0
[]
[nvd_minmod]
type = FVAdvectedMinmodWeightBased
blending_factor = 1.0
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.5 0 0"
advected_interp_method_name = upwind
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
[inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = false
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = '0.5*x'
[]
[analytic_solution]
type = ParsedFunction
expression = '0.5+0.5*x*x'
[]
[]
[Postprocessors]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
multi_system_fixed_point_relaxation_factor = 1.0
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -pc_factor_mat_solver_type -mat_mumps_icntl_14'
petsc_options_value = 'lu NONZERO 1e-12 mumps 50'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated-transient/channel_ERCOFTAC.i)
H = 1 #halfwidth of the channel
L = 100
Re = 13700
rho = 1
bulk_u = 1
mu = '${fparse rho * bulk_u * 2 * H / Re}'
advected_interp_method = 'upwind'
### k-epsilon Closure Parameters ###
sigma_k =1.0
sigma_eps = 1.3
C1_eps = 1.44
C2_eps = 1.92
C_mu = 0.09
### Initial and Boundary Conditions ###
intensity = 0.01
k_init = '${fparse 1.5*(intensity * bulk_u)^2}'
eps_init = '${fparse C_mu^0.75 * k_init^1.5 / (2*H)}'
### Modeling parameters ###
bulk_wall_treatment = false
walls = 'top bottom'
wall_treatment = 'eq_newton' # Options: eq_newton, eq_incremental, eq_linearized, neq
[Mesh]
[block_1]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${L}
ymin = 0
ymax = ${H}
nx = 4
ny = 3
bias_y = 0.7
[]
[block_2]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${L}
ymin = ${fparse -H}
ymax = 0
nx = 4
ny = 3
bias_y = ${fparse 1/0.7}
[]
[smg]
type = StitchedMeshGenerator
inputs = 'block_1 block_2'
clear_stitched_boundary_ids = true
stitch_boundaries_pairs = 'bottom top'
merge_boundaries_with_same_name = true
[]
# Prevent test diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_time]
type = LinearFVTimeDerivative
variable = vel_x
factor = ${rho}
[]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_diffusion]
type = LinearFVDiffusion
variable = vel_x
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_time]
type = LinearFVTimeDerivative
variable = vel_y
factor = ${rho}
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_diffusion]
type = LinearFVDiffusion
variable = vel_y
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_time]
type = LinearFVTurbulentTimeDerivative
variable = TKE
factor = ${rho}
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_time]
type = LinearFVTurbulentTimeDerivative
variable = TKED
factor = ${rho}
walls = ${walls}
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = 'bottom top'
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[yplus]
type = MooseLinearVariableFVReal
[]
[mu_eff]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[compute_y_plus]
type = RANSYPlusAux
variable = yplus
tke = TKE
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
[]
[compute_mu_eff]
type = ParsedAux
variable = 'mu_eff'
coupled_variables = 'mu_t'
expression = 'mu_t + ${mu}'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = PIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
turbulence_equation_relaxation = '0.4 0.4'
# Only partially converge each time step, we are marching to steady state
num_iterations = 10
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
turbulence_absolute_tolerance = '1e-8 1e-8'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
num_steps = 70
# Ramp up the time step to march to steady state
[TimeStepper]
type = FunctionDT
function = 'min(1 + t, 10)'
[]
[]
[Outputs]
[csv]
type = CSV
file_base = 'channel_ERCOFTAC_out'
# Only the steady state at the final time is checked
execute_on = 'FINAL'
create_final_symlink = true
[]
[]
[VectorPostprocessors]
[side_bottom]
type = SideValueSampler
boundary = 'bottom'
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[side_top]
type = SideValueSampler
boundary = 'top'
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_center_channel]
type = LineValueSampler
start_point = '${fparse 0.125 * L} ${fparse 0.0001} 0'
end_point = '${fparse 0.875 * L} ${fparse 0.0001} 0'
num_points = ${Mesh/block_1/nx}
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_quarter_radius_channel]
type = LineValueSampler
start_point = '${fparse 0.125 * L} ${fparse 0.5 * H} 0'
end_point = '${fparse 0.875 * L} ${fparse 0.5 * H} 0'
num_points = ${Mesh/block_1/nx}
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d-symmetric/channel.i)
mu = 2.6
rho = 1.2
advected_interp_method = 'upwind'
u_inlet = 1.1
half_width = 0.2
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1.0'
dy = '${half_width}'
ix = '30'
iy = '15'
subdomain_id = '0'
[]
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0.5
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.2
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
inactive = v_viscous_forcing
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[v_viscous_forcing]
type = LinearFVRZViscousSource
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${u_inlet}
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top'
variable = vel_y
functor = 0.0
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
variable = vel_x
momentum_component = x
u = vel_x
v = vel_y
boundary = 'bottom'
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
variable = vel_y
momentum_component = y
u = vel_x
v = vel_y
boundary = 'bottom'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 1.4
[]
[pressure-extrapolation]
type = LinearFVExtrapolatedPressureBC
boundary = 'top left'
variable = pressure
use_two_term_expansion = true
[]
[symmetry-p]
type = LinearFVPressureSymmetryBC
variable = pressure
boundary = 'bottom'
HbyA_flux = 'HbyA' # Functor created in the RhieChowMassFlux UO
[]
[]
[Functions]
[u_parabolic_profile]
type = ParsedFunction
expression = '3/2*${u_inlet}*(1 - pow(y/${half_width}, 2))' # Poiseuille profile
[]
[u_parabolic_profile_rz]
type = ParsedFunction
expression = '2*${u_inlet}*(1 - pow(y/${half_width}, 2))' # Cylindrical profile
[]
[]
[AuxVariables]
[vel_exact]
type = MooseLinearVariableFVReal
[]
[]
[AuxKernels]
[assign_vel_exact]
type = FunctionAux
variable = vel_exact
function = u_parabolic_profile
execute_on = TIMESTEP_END
[]
[]
[VectorPostprocessors]
[outlet_velocity_profile]
type = SideValueSampler
variable = 'vel_x vel_exact'
boundary = 'right'
sort_by = 'y'
execute_on = TIMESTEP_END
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
momentum_equation_relaxation = 0.5
pressure_variable_relaxation = 0.3
num_iterations = 1000
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/linear-segregated/2d/reconstructed-force-channel.i)
mu = 1
rho = 1
pressure_gradient_method = reconstructed
[Mesh]
[channel]
type = CartesianMeshGenerator
dim = 2
# Twenty cells per section resolve the interface-localized oscillation without making this
# two-solve comparison unnecessarily expensive.
dx = '1 1 1'
ix = '20 20 20'
dy = 1
iy = 3
subdomain_id = '0 1 2'
[]
[blocks]
type = RenameBlockGenerator
input = channel
old_block = '0 1 2'
new_block = 'upstream forced downstream'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 1
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = pressure_system
gradient_method = ${pressure_gradient_method}
[]
[]
[FVGradientMethods]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = green-gauss
# This is the relaxation used by the reconstructed-gradient channel regression tests.
gradient_relaxation = 0.1
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = upwind
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = x
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = upwind
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = y
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = x
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = y
[]
[middle_force]
type = LinearFVSource
variable = vel_x
# The large source makes the pressure-gradient jump dominate truncation error and visibly
# excites the unsupported cell-velocity mode when reconstruction is disabled.
source_density = 1e4
block = forced
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = vel_x
functor = 1
[]
[inlet_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = vel_y
functor = 0
[]
[symmetry_u]
type = LinearFVVelocitySymmetryBC
boundary = 'top bottom'
variable = vel_x
momentum_component = x
u = vel_x
v = vel_y
[]
[symmetry_v]
type = LinearFVVelocitySymmetryBC
boundary = 'top bottom'
variable = vel_y
momentum_component = y
u = vel_x
v = vel_y
[]
[pressure_flux]
type = LinearFVPressureFluxBC
boundary = left
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
u = vel_x
v = vel_y
rho = ${rho}
[]
[pressure_symmetry]
type = LinearFVPressureSymmetryBC
boundary = 'top bottom'
variable = pressure
HbyA_flux = HbyA
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = vel_y
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0
[]
[]
[Postprocessors]
[upstream_vel_x]
type = ElementAverageValue
variable = vel_x
block = upstream
execute_on = FINAL
[]
[forced_vel_x]
type = ElementAverageValue
variable = vel_x
block = forced
execute_on = FINAL
[]
[downstream_vel_x]
type = ElementAverageValue
variable = vel_x
block = downstream
execute_on = FINAL
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
# Five hundred iterations allow the reconstructed coupling pressure gradient to relax to the same
# uniform steady field as the standard gradient. The reconstructed momentum residual is
# cancellation-dominated at the source jumps and does not satisfy the generic normalized monitor.
num_iterations = 500
continue_on_max_its = true
# Relative to the 1e4 source, this requires the ordinary outer residuals to fall by eleven orders
# of magnitude while remaining above platform-level roundoff stagnation.
pressure_absolute_tolerance = 1e-7
momentum_absolute_tolerance = 1e-7
momentum_petsc_options_iname = '-pc_type'
momentum_petsc_options_value = lu
pressure_petsc_options_iname = '-pc_type'
pressure_petsc_options_value = lu
print_fields = false
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
exodus = true
[]
(test/tests/linearfvkernels/advection/diagonal-step-2d.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 51
ny = 51
[]
# Prevent test diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 0.5
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[average]
type = FVGeometricAverage
[]
[muscl]
type = FVAdvectedMUSCLDeferredCorrection
deferred_correction_factor = 1.0
[]
[nvd_vanleer]
type = FVAdvectedVanLeerWeightBased
blending_factor = 0.75
[]
[nvd_minmod]
type = FVAdvectedMinmodWeightBased
blending_factor = 0.75
[]
[]
[LinearFVKernels]
[advection]
type = LinearFVAdvection
variable = u
velocity = "1 1 0"
advected_interp_method_name = nvd_minmod
[]
[]
[LinearFVBCs]
[left_inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = left
functor = 0.5
[]
[bottom_inflow]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = bottom
functor = 1
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = 'right top'
use_two_term_expansion = true
[]
[]
[VectorPostprocessors]
[diag_sample]
type = LineValueSampler
variable = u
start_point = '1.0 0 0'
end_point = '0 1.0 0'
num_points = 101
sort_by = id
warn_discontinuous_face_values = false
execute_on = TIMESTEP_END
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 50
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-12
multi_system_fixed_point = true
multi_system_fixed_point_convergence = linear
multi_system_fixed_point_relaxation_factor = 0.3
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -pc_factor_mat_solver_type -mat_mumps_icntl_14 -mat_mumps_icntl_20'
petsc_options_value = 'lu NONZERO 1e-12 mumps 50 0'
[]
[Outputs]
csv = true
exodus = true
execute_on = TIMESTEP_END
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/channel/linear-segregated/channel_ERCOFTAC_mu_eff.i)
!include header_and_mesh.i
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_eff'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_eff'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_eff_k'
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_eff_eps'
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'top bottom'
variable = vel_y
functor = 0.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = 'bottom top'
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[]
[FunctorMaterials]
[compute_mu_eff]
type = FunctorEffectiveDynamicViscosity
property_name = mu_eff
mu = ${mu}
mu_t = mu_t
mu_t_inverse_factor = 1
execute_on = 'ALWAYS'
[]
[compute_mu_eff_k]
type = FunctorEffectiveDynamicViscosity
property_name = mu_eff_k
mu = ${mu}
mu_t = mu_t
mu_t_inverse_factor = ${sigma_k}
execute_on = 'ALWAYS'
[]
[compute_mu_eff_eps]
type = FunctorEffectiveDynamicViscosity
property_name = mu_eff_eps
mu = ${mu}
mu_t = mu_t
mu_t_inverse_factor = ${sigma_eps}
execute_on = 'ALWAYS'
[]
[]
!include executioner_regular_channel.i
variables_to_sample = 'vel_x vel_y pressure_over_density TKE TKED'
!include postprocessing.i
(modules/navier_stokes/test/tests/finite_volume/ins/cht/conjugate_heat_transfer/cht_rob-rob.i)
### benchmark sources:
### https://doi.org/10.1016/j.compfluid.2018.06.016
### https://doi.org/10.1016/0017-9310(74)90087-8
b = 0.01 # plate thickness
l = 0.2 # plate length
nxi = 24 # nx in the inlet/entrance region
nyf = 18 # ny in fluid
nxf = 24 # nx in the main fluid region
nys = 8 # ny in the solid domain
fx1_bias = 1.00 # bdry layer bias - fluid
fx2_bias = '${fparse 1.0/1.00}' # bdry layer bias - solid
fy_bias = 1.20 # bdry layer bias - fluid
sy_bias = '${fparse 1.0/1.05}' # bdry layer bias - solid
k_s = 0.2876
rho = 0.3525
mu = 3.95e-5
k = 0.06808
cp = 1142.6
vin = 12.0
Tin = 1000.0
T_s_bottom = 600.0
P_out = 1.03e5
h_s = 1.0
h_f = 1.0
advected_interp_method = 'upwind'
[Mesh]
[fluid_channel]
type = GeneratedMeshGenerator
dim = 2
nx = ${nxf}
ny = ${nyf}
xmin = 0
xmax = ${l}
ymin = 0
ymax = '${fparse 10.0*b}'
subdomain_ids = '1'
subdomain_name = 'fluid'
bias_x = '${fx1_bias}'
bias_y = '${fparse fy_bias}'
boundary_name_prefix = 'fluid'
[]
[solid_base]
type = GeneratedMeshGenerator
dim = 2
nx = ${nxf}
ny = ${nys}
xmin = 0
xmax = ${l}
ymin = '${fparse -b}'
ymax = 0
subdomain_ids = '2'
subdomain_name = 'solid'
bias_x = ${fx1_bias}
bias_y = '${fparse sy_bias}'
boundary_id_offset = 10
boundary_name_prefix = 'solid'
[]
[entrance]
type = GeneratedMeshGenerator
dim = 2
nx = '${fparse 2.0*nxi}'
ny = ${nyf}
xmin = '${fparse -2.0*l}'
xmax = 0
ymin = 0
ymax = '${fparse 10.0*b}'
subdomain_ids = '0'
subdomain_name = 'entrance'
bias_x = ${fx2_bias}
bias_y = '${fparse fy_bias}'
boundary_id_offset = 20
boundary_name_prefix = 'ent'
[]
[smg]
type = StitchedMeshGenerator
inputs = 'entrance fluid_channel solid_base'
stitch_boundaries_pairs = 'ent_right fluid_left;
fluid_bottom solid_top'
prevent_boundary_ids_overlap = false
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'smg'
primary_block = 'fluid'
paired_block = 'solid'
new_boundary = interface
[]
[symmetry_transform]
type = SymmetryTransformGenerator
input = interface
mirror_point = '0 0 0'
mirror_normal_vector = '0 1 0'
[]
inactive = 'symmetry_transform'
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system solid_energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = '0 1'
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${vin}
solver_sys = u_system
block = '0 1'
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
block = '0 1'
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${P_out}
block = '0 1'
[]
[T_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${Tin}
block = '0 1'
[]
[T_solid]
type = MooseLinearVariableFVReal
solver_sys = solid_energy_system
initial_condition = ${T_s_bottom}
block = 2
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T_fluid
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T_fluid
diffusion_coeff = ${k}
use_nonorthogonal_correction = false
[]
[solid-conduction]
type = LinearFVDiffusion
variable = T_solid
diffusion_coeff = ${k_s}
use_nonorthogonal_correction = false
[]
[]
[LinearFVBCs]
# velocity BCs
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_left'
variable = vel_x
functor = ${vin}
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_left'
variable = vel_y
functor = '0.000'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_bottom interface'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_bottom interface'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'fluid_right'
variable = pressure
functor = ${P_out}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_right'
variable = vel_y
use_two_term_expansion = false
[]
# freestream BCs for top of fluid domain
[freestream_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_top ent_top'
variable = vel_x
use_two_term_expansion = false
[]
[freestream_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_top ent_top'
variable = vel_y
use_two_term_expansion = false
[]
[freestream_p]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'fluid_top ent_top'
variable = pressure
functor = 0
[]
# temperature BCs
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_fluid
functor = ${Tin}
boundary = 'ent_left'
[]
[heated_wall_solid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_solid
functor = ${T_s_bottom}
boundary = 'solid_bottom'
[]
[insulated_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = T_fluid
functor = 0
boundary = 'ent_top ent_bottom fluid_top'
[]
[insulated_solid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = T_solid
functor = 0
boundary = 'solid_left solid_right'
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T_fluid
use_two_term_expansion = false
boundary = 'fluid_right'
[]
[fluid_solid]
type = LinearFVRobinCHTBC
variable = T_fluid
boundary = interface
h = ${h_f}
incoming_flux = heat_flux_to_fluid_interface
surface_temperature = interface_temperature_to_fluid_interface
thermal_conductivity = ${k}
[]
[solid_fluid]
type = LinearFVRobinCHTBC
variable = T_solid
boundary = interface
h = ${h_s}
incoming_flux = heat_flux_to_solid_interface
surface_temperature = interface_temperature_to_solid_interface
thermal_conductivity = ${k_s}
[]
[]
[FunctorMaterials]
[rhocpT]
property_name = 'rhocpT'
type = ParsedFunctorMaterial
functor_names = 'T_fluid'
expression = '${rho}*${cp}*T_fluid'
[]
[]
[Postprocessors]
[h_in]
type = VolumetricFlowRate
boundary = 'ent_left'
vel_x = vel_x
vel_y = vel_y
rhie_chow_user_object = rc
advected_quantity = 'rhocpT'
subtract_mesh_velocity = false
[]
[h_out]
type = VolumetricFlowRate
boundary = 'fluid_right fluid_top ent_top interface'
vel_x = vel_x
vel_y = vel_y
rhie_chow_user_object = rc
advected_quantity = 'rhocpT'
advected_interp_method = upwind
subtract_mesh_velocity = false
[]
[]
[VectorPostprocessors]
[y_vs_ts]
type = LineValueSampler
variable = 'T_solid'
start_point = '0.05 -1e-9 0' # making sure we are always in the domain
end_point = '0.05 ${fparse -b+1e-9} 0'
num_points = 8
sort_by = id
warn_discontinuous_face_values = false
[]
[y_vs_tf]
type = LineValueSampler
variable = 'T_fluid'
start_point = '0.05 1e-9 0' # making sure we are always in the domain
end_point = '0.05 ${fparse b-1e-9} 0'
num_points = 12
sort_by = id
warn_discontinuous_face_values = false
[]
[]
[Executioner]
type = SIMPLE
num_iterations = 1000
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
rhie_chow_user_object = 'rc'
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
momentum_equation_relaxation = 0.9
pressure_variable_relaxation = 0.3
momentum_absolute_tolerance = 1e-7
pressure_absolute_tolerance = 1e-7
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_system = 'energy_system'
solid_energy_system = 'solid_energy_system'
energy_l_abs_tol = 1e-10
solid_energy_l_abs_tol = 1e-10
energy_l_tol = 0
solid_energy_l_tol = 0
energy_equation_relaxation = 1.0
energy_absolute_tolerance = 1e-7
solid_energy_absolute_tolerance = 1e-7
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
solid_energy_petsc_options_iname = '-pc_type -pc_hypre_type'
solid_energy_petsc_options_value = 'hypre boomeramg'
cht_interfaces = 'interface'
cht_solid_flux_relaxation = 1.0
cht_fluid_flux_relaxation = 1.0
cht_solid_temperature_relaxation = 1.0
cht_fluid_temperature_relaxation = 1.0
max_cht_fpi = 2
print_fields = false
[]
[Outputs]
exodus = true
csv = true
execute_on = timestep_end
[]
(test/tests/linearfvkernels/block-restriction/block-restricted-adr.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '0.1 1 0.1'
dy = '0.1 0.5 0.1'
ix = '1 2 1'
iy = '1 1 1'
subdomain_id = '1 1 1 1 2 3 1 1 1'
[]
[transform]
type = TransformGenerator
input = cmg
transform = TRANSLATE
vector_value = '-0.1 -0.1 0.0'
[]
[create_sides]
type = SideSetsBetweenSubdomainsGenerator
input = transform
new_boundary = sides
primary_block = 2
paired_block = 1
[]
[create_outlet]
type = SideSetsBetweenSubdomainsGenerator
input = create_sides
new_boundary = outlet
primary_block = 2
paired_block = 3
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
block = 2
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[diffusion]
type = LinearFVDiffusion
variable = u
diffusion_coeff = diff_coeff_func
use_nonorthogonal_correction = false
[]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.5 0 0"
advected_interp_method_name = average
[]
[reaction]
type = LinearFVReaction
variable = u
coeff = coeff_func
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
inactive = "outflow"
[dir]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "sides outlet"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = true
[]
[]
[Functions]
[diff_coeff_func]
type = ParsedFunction
expression = '1.0+0.5*x*y'
[]
[coeff_func]
type = ParsedFunction
expression = '1.0+1.0/(1+x*y)'
[]
[source_func]
type = ParsedFunction
expression = '-1.0*x*pi*sin((1/2)*x*pi)*cos(2*y*pi) - 0.25*y*pi*sin(2*y*pi)*cos((1/2)*x*pi) + (1.0 + 1.0/(x*y + 1))*(sin((1/2)*x*pi)*sin(2*y*pi) + 1.5) + (17/4)*pi^2*(0.5*x*y + 1.0)*sin((1/2)*x*pi)*sin(2*y*pi) + 0.25*pi*sin(2*y*pi)*cos((1/2)*x*pi)'
[]
[analytic_solution]
type = ParsedFunction
expression = 'sin((1/2)*x*pi)*sin(2*y*pi) + 1.5'
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = FINAL
block = 2
[]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
block = 2
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/segregated/channel-drift-flux.i)
mu = 1.0
rho = 10.0
mu_d = 0.1
rho_d = 1.0
l = 2
# 'average' leads to slight oscillations, upwind may be preferred
# This method is selected for consistency with the original nonlinear input
advected_interp_method = 'average'
# TODO remove need for those
cp = 1
k = 1
cp_d = 1
k_d = 1
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = '${fparse l * 5}'
ymin = '${fparse -l / 2}'
ymax = '${fparse l / 2}'
nx = 10
ny = 4
[]
uniform_refine = 0
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system phi_system'
previous_nl_solution_required = true
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = 1
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
[]
[phase_2]
type = MooseLinearVariableFVReal
solver_sys = phi_system
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[flow_p_diffusion]
type = LinearFVPressureCorrectionDiffusion
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
variable = pressure
[]
[flow_HbyA_divergence]
type = LinearFVDivergence
face_flux = HbyA
force_boundary_execution = true
variable = pressure
[]
[flow_ins_momentum_flux_x]
type = LinearWCNSFVMomentumFlux
advected_interp_method_name = ${advected_interp_method}
momentum_component = x
mu = mu_mixture
rhie_chow_user_object = ins_rhie_chow_interpolator
u = vel_x
use_deviatoric_terms = false
use_nonorthogonal_correction = false
v = vel_y
variable = vel_x
[]
[flow_ins_momentum_flux_y]
type = LinearWCNSFVMomentumFlux
advected_interp_method_name = ${advected_interp_method}
momentum_component = y
mu = mu_mixture
rhie_chow_user_object = ins_rhie_chow_interpolator
u = vel_x
use_deviatoric_terms = false
use_nonorthogonal_correction = false
v = vel_y
variable = vel_y
[]
[mixture_drift_flux_x]
type = LinearWCNSFV2PMomentumDriftFlux
density_interp_method = average
fraction_dispersed = phase_2
momentum_component = x
rhie_chow_user_object = ins_rhie_chow_interpolator
rho_d = ${rho_d}
u_slip = vel_slip_x
v_slip = vel_slip_y
variable = vel_x
[]
[mixture_drift_flux_y]
type = LinearWCNSFV2PMomentumDriftFlux
density_interp_method = average
fraction_dispersed = phase_2
momentum_component = y
rhie_chow_user_object = ins_rhie_chow_interpolator
rho_d = ${rho_d}
u_slip = vel_slip_x
v_slip = vel_slip_y
variable = vel_y
[]
[flow_ins_momentum_pressure_x]
type = LinearFVMomentumPressure
momentum_component = x
pressure = pressure
variable = vel_x
[]
[flow_ins_momentum_pressure_y]
type = LinearFVMomentumPressure
momentum_component = y
pressure = pressure
variable = vel_y
[]
[flow_momentum_friction_0_x]
type = LinearFVMomentumFriction
Darcy_name = Darcy_coefficient_vec
momentum_component = x
mu = mu_mixture
variable = vel_x
[]
[flow_momentum_friction_0_y]
type = LinearFVMomentumFriction
Darcy_name = Darcy_coefficient_vec
momentum_component = y
mu = mu_mixture
variable = vel_y
[]
# Mixture phase equation
[mixture_ins_phase_2_advection]
type = LinearFVScalarAdvection
advected_interp_method_name = upwind
rhie_chow_user_object = ins_rhie_chow_interpolator
u_slip = vel_slip_x
v_slip = vel_slip_y
variable = phase_2
[]
[mixture_phase_interface_reaction]
type = LinearFVReaction
coeff = 0.1
variable = phase_2
[]
[mixture_phase_interface_source]
type = LinearFVSource
scaling_factor = 0.1
source_density = phase_1
variable = phase_2
[]
[]
[LinearFVBCs]
[vel_x_left]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
functor = 1
variable = vel_x
[]
[vel_y_left]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
functor = 0
variable = vel_y
[]
[pressure_extrapolation_inlet_left]
type = LinearFVExtrapolatedPressureBC
boundary = left
use_two_term_expansion = true
variable = pressure
[]
[vel_x_right]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
use_two_term_expansion = true
variable = vel_x
[]
[vel_y_right]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
use_two_term_expansion = true
variable = vel_y
[]
[pressure_right]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
functor = 0
variable = pressure
[]
[vel_x_bottom]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = bottom
functor = 0
variable = vel_x
[]
[vel_y_bottom]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = bottom
functor = 0
variable = vel_y
[]
[vel_x_top]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = top
functor = 0
variable = vel_x
[]
[vel_y_top]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = top
functor = 0
variable = vel_y
[]
[pressure_extrapolation_top_bottom]
type = LinearFVExtrapolatedPressureBC
boundary = 'top bottom'
use_two_term_expansion = true
variable = pressure
[]
[phase_2_left]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
functor = 0.1
variable = phase_2
[]
[phase_2_right]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
use_two_term_expansion = true
variable = phase_2
[]
[]
[FunctorMaterials]
[flow_ins_speed_material]
type = ADVectorMagnitudeFunctorMaterial
execute_on = ALWAYS
outputs = none
vector_magnitude_name = speed
x_functor = vel_x
y_functor = vel_y
[]
[mixture_phase_1_fraction]
type = ParsedFunctorMaterial
execute_on = ALWAYS
expression = '1 - phase_2'
functor_names = phase_2
output_properties = phase_1
outputs = all
property_name = phase_1
[]
[mixture_mixture_material]
type = WCNSLinearFVMixtureFunctorMaterial
execute_on = ALWAYS
limit_phase_fraction = true
outputs = all
phase_1_fraction = phase_2
phase_1_names = '${rho_d} ${mu_d} ${cp_d} ${k_d}'
phase_2_names = '${rho} ${mu} ${cp} ${k}'
prop_names = 'rho_mixture mu_mixture cp_mixture k_mixture'
[]
[mixture_slip_x]
type = WCNSFV2PSlipVelocityFunctorMaterial
execute_on = ALWAYS
gravity = '0 0 0'
linear_coef_name = Darcy_coefficient
momentum_component = x
mu = mu_mixture
outputs = all
particle_diameter = 0.01
rho = ${rho}
rho_d = ${rho_d}
slip_velocity_name = vel_slip_x
u = vel_x
v = vel_y
[]
[mixture_slip_y]
type = WCNSFV2PSlipVelocityFunctorMaterial
execute_on = ALWAYS
gravity = '0 0 0'
linear_coef_name = Darcy_coefficient
momentum_component = y
mu = mu_mixture
outputs = all
particle_diameter = 0.01
rho = ${rho}
rho_d = ${rho_d}
slip_velocity_name = vel_slip_y
u = vel_x
v = vel_y
[]
[mixture_dispersed_drag]
type = NSFVDispersePhaseDragFunctorMaterial
drag_coef_name = Darcy_coefficient
execute_on = ALWAYS
mu = mu_mixture
outputs = all
particle_diameter = 0.01
rho = rho_mixture
u = vel_x
v = vel_y
[]
[]
[UserObjects]
[ins_rhie_chow_interpolator]
type = RhieChowMassFlux
p_diffusion_kernel = flow_p_diffusion
pressure = pressure
rho = rho_mixture
u = vel_x
v = vel_y
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'ins_rhie_chow_interpolator'
# Systems
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
active_scalar_systems = 'phi_system'
momentum_equation_relaxation = 0.8
active_scalar_equation_relaxation = '0.7'
pressure_variable_relaxation = 0.3
# We need to converge the problem to show conservation
num_iterations = 200
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
active_scalar_absolute_tolerance = '1e-10'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
active_scalar_petsc_options_iname = '-pc_type -pc_hypre_type'
active_scalar_petsc_options_value = 'hypre boomeramg'
momentum_l_abs_tol = 1e-13
pressure_l_abs_tol = 1e-13
active_scalar_l_abs_tol = 1e-13
momentum_l_tol = 0
pressure_l_tol = 0
active_scalar_l_tol = 0
# print_fields = true
continue_on_max_its = true
[]
[Outputs]
csv = true
[]
[Postprocessors]
[Re]
type = ParsedPostprocessor
expression = '10.0 * 2 * 1'
[]
[average_phase2]
type = ElementAverageValue
variable = phase_2
[]
[dp]
type = PressureDrop
boundary = 'left right'
downstream_boundary = right
pressure = pressure
upstream_boundary = left
[]
[max_phase2]
type = ElementExtremeValue
variable = phase_2
[]
[]
(test/tests/linearfvkernels/diffusion-reaction-advection/advection-diffusion-reaction-2d.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 1
ymax = 0.5
[]
[]
[Problem]
linear_sys_names = 'u_sys'
[]
[Variables]
[u]
type = MooseLinearVariableFVReal
solver_sys = 'u_sys'
initial_condition = 1.0
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[diffusion]
type = LinearFVDiffusion
variable = u
diffusion_coeff = diff_coeff_func
use_nonorthogonal_correction = false
[]
[advection]
type = LinearFVAdvection
variable = u
velocity = "0.5 0 0"
advected_interp_method_name = average
[]
[reaction]
type = LinearFVReaction
variable = u
coeff = coeff_func
[]
[source]
type = LinearFVSource
variable = u
source_density = source_func
[]
[]
[LinearFVBCs]
inactive = "outflow neumann"
[dir]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = u
boundary = "left right top bottom"
functor = analytic_solution
[]
[outflow]
type = LinearFVAdvectionDiffusionOutflowBC
variable = u
boundary = "right"
use_two_term_expansion = true
[]
[neumann]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = u
boundary = "top"
functor = analytic_solution_neumann_top
diffusion_coeff = diff_coeff_func
[]
[]
[Functions]
[diff_coeff_func]
type = ParsedFunction
expression = '1.0+0.5*x*y'
[]
[coeff_func]
type = ParsedFunction
expression = '1.0+1.0/(1+x*y)'
[]
[source_func]
type = ParsedFunction
expression = '-1.0*x*pi*sin((1/2)*x*pi)*cos(2*y*pi) - 0.25*y*pi*sin(2*y*pi)*cos((1/2)*x*pi) + (1.0 + 1.0/(x*y + 1))*(sin((1/2)*x*pi)*sin(2*y*pi) + 1.5) + (17/4)*pi^2*(0.5*x*y + 1.0)*sin((1/2)*x*pi)*sin(2*y*pi) + 0.25*pi*sin(2*y*pi)*cos((1/2)*x*pi)'
[]
[analytic_solution]
type = ParsedFunction
expression = 'sin((1/2)*x*pi)*sin(2*y*pi) + 1.5'
[]
[analytic_solution_neumann_top]
type = ParsedFunction
expression = '(1.0+0.5*x*y)*sin((1/2)*x*pi)*cos(2*y*pi)*2*pi'
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
execute_on = FINAL
[]
[error]
type = ElementL2FunctorError
approximate = u
exact = analytic_solution
execute_on = FINAL
[]
[]
[Convergence]
[linear]
type = IterationCountConvergence
max_iterations = 1
converge_at_max_iterations = true
[]
[]
[Executioner]
type = Steady
system_names = u_sys
l_tol = 1e-10
multi_system_fixed_point=true
multi_system_fixed_point_convergence=linear
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[csv]
type = CSV
execute_on = FINAL
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/turbulence/bfs/linear-segregated/BFS_ERCOFTAC.i)
Re = 5100
rho = 1.0
bulk_u = 1.0
H = 1.0
mu = '${fparse rho * bulk_u * H / Re}'
advected_interp_method = 'upwind'
### k-epsilon Closure Parameters ###
sigma_k = 1.0
sigma_eps = 1.3
C1_eps = 1.44
C2_eps = 1.92
C_mu = 0.09
### Initial and Boundary Conditions ###
intensity = 0.01
k_init = '${fparse 1.5*(intensity * bulk_u)^2}'
eps_init = '${fparse C_mu^0.75 * k_init^1.5 / H}'
### Modeling parameters ###
bulk_wall_treatment = false
walls = 'bottom wall-side top'
wall_treatment = 'eq_incremental' # Options: eq_newton, eq_incremental, eq_linearized, neq
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${fparse 10.0*H} ${fparse 20.0*H}'
dy = '${H} ${fparse 5*H}'
ix = '8 16'
iy = '2 8'
subdomain_id = '
2 1
1 1
'
[]
[corner_walls]
type = SideSetsBetweenSubdomainsGenerator
input = gen
primary_block = '1'
paired_block = '2'
new_boundary = 'wall-side'
[]
[delete_bottom]
type = BlockDeletionGenerator
input = corner_walls
block = '2'
[]
# Prevent test diffing on distributed parallel element numbering
allow_renumbering = false
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system TKE_system TKED_system'
previous_nl_solution_required = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${bulk_u}
solver_sys = u_system
[]
[vel_y]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = v_system
[]
[pressure]
type = MooseLinearVariableFVReal
initial_condition = 1e-8
solver_sys = pressure_system
[]
[TKE]
type = MooseLinearVariableFVReal
solver_sys = TKE_system
initial_condition = ${k_init}
[]
[TKED]
type = MooseLinearVariableFVReal
solver_sys = TKED_system
initial_condition = ${eps_init}
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[u_diffusion]
type = LinearFVDiffusion
variable = vel_x
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = 'mu_t'
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
use_deviatoric_terms = yes
[]
[v_diffusion]
type = LinearFVDiffusion
variable = vel_y
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[TKE_advection]
type = LinearFVTurbulentAdvection
variable = TKE
advected_interp_method_name = ${advected_interp_method}
[]
[TKE_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
[]
[TKE_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKE
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_k}
use_nonorthogonal_correction = false
[]
[TKE_source_sink]
type = LinearFVTKESourceSink
variable = TKE
u = vel_x
v = vel_y
epsilon = TKED
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[TKED_advection]
type = LinearFVTurbulentAdvection
variable = TKED
advected_interp_method_name = ${advected_interp_method}
walls = ${walls}
[]
[TKED_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = ${mu}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_turb_diffusion]
type = LinearFVTurbulentDiffusion
variable = TKED
diffusion_coeff = 'mu_t'
scaling_coeff = ${sigma_eps}
use_nonorthogonal_correction = false
walls = ${walls}
[]
[TKED_source_sink]
type = LinearFVTKEDSourceSink
variable = TKED
u = vel_x
v = vel_y
tke = TKE
rho = ${rho}
mu = ${mu}
mu_t = 'mu_t'
C1_eps = ${C1_eps}
C2_eps = ${C2_eps}
walls = ${walls}
wall_treatment = ${wall_treatment}
C_pl = 1e10
[]
[]
[LinearFVBCs]
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = '${bulk_u}'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = '0.0'
[]
[inlet_TKE]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKE
functor = '${k_init}'
[]
[inlet_TKED]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = TKED
functor = '${eps_init}'
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = 0.0
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = vel_y
use_two_term_expansion = false
[]
[outlet_TKE]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKE
use_two_term_expansion = false
[]
[outlet_TKED]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'right'
variable = TKED
use_two_term_expansion = false
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${walls}
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${walls}
variable = vel_y
functor = 0.0
[]
[walls_mu_t]
type = LinearFVTurbulentViscosityWallFunctionBC
boundary = ${walls}
variable = 'mu_t'
u = vel_x
v = vel_y
rho = ${rho}
mu = ${mu}
tke = TKE
wall_treatment = ${wall_treatment}
[]
[]
[AuxVariables]
[mu_t]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init}'
[]
[yplus]
type = MooseLinearVariableFVReal
[]
[mu_eff]
type = MooseLinearVariableFVReal
initial_condition = '${fparse rho * C_mu * ${k_init}^2 / eps_init + mu}'
[]
[]
[AuxKernels]
[compute_mu_t]
type = kEpsilonViscosityAux
variable = mu_t
C_mu = ${C_mu}
tke = TKE
epsilon = TKED
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
bulk_wall_treatment = ${bulk_wall_treatment}
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
mu_t_ratio_max = 1e20
[]
[compute_y_plus]
type = RANSYPlusAux
variable = yplus
tke = TKE
mu = ${mu}
rho = ${rho}
u = vel_x
v = vel_y
walls = ${walls}
wall_treatment = ${wall_treatment}
execute_on = 'NONLINEAR'
[]
[compute_mu_eff]
type = ParsedAux
variable = 'mu_eff'
coupled_variables = 'mu_t'
expression = 'mu_t + ${mu}'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = SIMPLE
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
turbulence_systems = 'TKE_system TKED_system'
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
turbulence_l_abs_tol = 1e-14
momentum_l_tol = 1e-14
pressure_l_tol = 1e-14
turbulence_l_tol = 1e-14
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
turbulence_equation_relaxation = '0.5 0.5'
num_iterations = 1000
pressure_absolute_tolerance = 1e-12
momentum_absolute_tolerance = 1e-12
turbulence_absolute_tolerance = '1e-12 1e-12'
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
turbulence_petsc_options_iname = '-pc_type -pc_hypre_type'
turbulence_petsc_options_value = 'hypre boomeramg'
print_fields = false
continue_on_max_its = true
[]
[Outputs]
csv = true
[console]
type = Console
outlier_variable_norms = false
[]
[]
[VectorPostprocessors]
[side_bottom]
type = SideValueSampler
boundary = 'bottom'
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[side_top]
type = SideValueSampler
boundary = 'top'
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_entry_channel_wall]
type = LineValueSampler
start_point = '${fparse 0.5 * H} ${fparse 1.00001 * H} 0'
end_point = '${fparse 29.5 * H} ${fparse 1.00001 * H} 0'
num_points = 24
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[line_quarter_entry_channel]
type = LineValueSampler
start_point = '${fparse 0.5 * H} ${fparse 2.25001 * H} 0'
end_point = '${fparse 29.5 * H} ${fparse 2.25001 * H} 0'
num_points = 24
variable = 'vel_x vel_y pressure TKE TKED'
sort_by = 'x'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/cht/conjugate_heat_transfer/cht_neu-dir.i)
### benchmark sources:
### https://doi.org/10.1016/j.compfluid.2018.06.016
### https://doi.org/10.1016/0017-9310(74)90087-8
b = 0.01 # plate thickness
l = 0.2 # plate length
nxi = 24 # nx in the inlet/entrance region
nyf = 18 # ny in fluid
nxf = 24 # nx in the main fluid region
nys = 8 # ny in the solid domain
fx1_bias = 1.00 # bdry layer bias - fluid
fx2_bias = '${fparse 1.0/1.00}' # bdry layer bias - solid
fy_bias = 1.20 # bdry layer bias - fluid
sy_bias = '${fparse 1.0/1.05}' # bdry layer bias - solid
k_s = 0.2876
rho = 0.3525
mu = 3.95e-5
k = 0.06808
cp = 1142.6
vin = 12.0
Tin = 1000.0
T_s_bottom = 600.0
P_out = 1.03e5
h_s = 0.0
advected_interp_method = 'upwind'
[Mesh]
[fluid_channel]
type = GeneratedMeshGenerator
dim = 2
nx = ${nxf}
ny = ${nyf}
xmin = 0
xmax = ${l}
ymin = 0
ymax = '${fparse 10.0*b}'
subdomain_ids = '1'
subdomain_name = 'fluid'
bias_x = '${fx1_bias}'
bias_y = '${fparse fy_bias}'
boundary_name_prefix = 'fluid'
[]
[solid_base]
type = GeneratedMeshGenerator
dim = 2
nx = ${nxf}
ny = ${nys}
xmin = 0
xmax = ${l}
ymin = '${fparse -b}'
ymax = 0
subdomain_ids = '2'
subdomain_name = 'solid'
bias_x = ${fx1_bias}
bias_y = '${fparse sy_bias}'
boundary_id_offset = 10
boundary_name_prefix = 'solid'
[]
[entrance]
type = GeneratedMeshGenerator
dim = 2
nx = '${fparse 2.0*nxi}'
ny = ${nyf}
xmin = '${fparse -2.0*l}'
xmax = 0
ymin = 0
ymax = '${fparse 10.0*b}'
subdomain_ids = '0'
subdomain_name = 'entrance'
bias_x = ${fx2_bias}
bias_y = '${fparse fy_bias}'
boundary_id_offset = 20
boundary_name_prefix = 'ent'
[]
[smg]
type = StitchedMeshGenerator
inputs = 'entrance fluid_channel solid_base'
stitch_boundaries_pairs = 'ent_right fluid_left;
fluid_bottom solid_top'
prevent_boundary_ids_overlap = false
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'smg'
primary_block = 'fluid'
paired_block = 'solid'
new_boundary = interface
[]
[symmetry_transform]
type = SymmetryTransformGenerator
input = interface
mirror_point = '0 0 0'
mirror_normal_vector = '0 1 0'
[]
inactive = 'symmetry_transform'
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system solid_energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = '0 1'
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = ${vin}
solver_sys = u_system
block = '0 1'
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
block = '0 1'
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${P_out}
block = '0 1'
[]
[T_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${Tin}
block = '0 1'
[]
[T_solid]
type = MooseLinearVariableFVReal
solver_sys = solid_energy_system
initial_condition = ${T_s_bottom}
block = 2
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'x'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = 'y'
rhie_chow_user_object = 'rc'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[h_advection]
type = LinearFVEnergyAdvection
variable = T_fluid
advected_quantity = temperature
cp = ${cp}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[conduction]
type = LinearFVDiffusion
variable = T_fluid
diffusion_coeff = ${k}
use_nonorthogonal_correction = false
[]
[solid-conduction]
type = LinearFVDiffusion
variable = T_solid
diffusion_coeff = ${k_s}
use_nonorthogonal_correction = false
[]
[]
[LinearFVBCs]
# velocity BCs
[inlet-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_left'
variable = vel_x
functor = ${vin}
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_left'
variable = vel_y
functor = '0.000'
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_bottom interface'
variable = vel_x
functor = 0.0
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'ent_bottom interface'
variable = vel_y
functor = 0.0
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'fluid_right'
variable = pressure
functor = ${P_out}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_right'
variable = vel_x
use_two_term_expansion = false
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_right'
variable = vel_y
use_two_term_expansion = false
[]
# freestream BCs for top of fluid domain
[freestream_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_top ent_top'
variable = vel_x
use_two_term_expansion = false
[]
[freestream_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = 'fluid_top ent_top'
variable = vel_y
use_two_term_expansion = false
[]
[freestream_p]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'fluid_top ent_top'
variable = pressure
functor = 0
[]
# temperature BCs
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_fluid
functor = ${Tin}
boundary = 'ent_left'
[]
[heated_wall_solid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T_solid
functor = ${T_s_bottom}
boundary = 'solid_bottom'
[]
[insulated_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = T_fluid
functor = 0
boundary = 'ent_bottom ent_top fluid_top'
[]
[insulated_solid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
variable = T_solid
functor = 0
boundary = 'solid_left solid_right'
[]
[outlet_T]
type = LinearFVAdvectionDiffusionOutflowBC
variable = T_fluid
use_two_term_expansion = false
boundary = 'fluid_right'
[]
[fluid_solid]
type = LinearFVDirichletCHTBC
variable = T_fluid
boundary = interface
functor = interface_temperature_to_fluid_interface
[]
[solid_fluid]
type = LinearFVRobinCHTBC
variable = T_solid
boundary = interface
h = ${h_s}
thermal_conductivity = ${k_s}
incoming_flux = heat_flux_to_solid_interface
surface_temperature = interface_temperature_to_solid_interface
[]
[]
[FunctorMaterials]
[rhocpT]
property_name = 'rhocpT'
type = ParsedFunctorMaterial
functor_names = 'T_fluid'
expression = '${rho}*${cp}*T_fluid'
[]
[]
[Postprocessors]
[h_in]
type = VolumetricFlowRate
boundary = 'ent_left'
vel_x = vel_x
vel_y = vel_y
rhie_chow_user_object = rc
advected_quantity = 'rhocpT'
subtract_mesh_velocity = false
[]
[h_out]
type = VolumetricFlowRate
boundary = 'fluid_right fluid_top ent_top interface'
vel_x = vel_x
vel_y = vel_y
rhie_chow_user_object = rc
advected_quantity = 'rhocpT'
advected_interp_method = upwind
subtract_mesh_velocity = false
[]
[]
[VectorPostprocessors]
[y_vs_ts]
type = LineValueSampler
variable = 'T_solid'
start_point = '0.05 -1e-9 0' # making sure we are always in the domain
end_point = '0.05 ${fparse -b+1e-9} 0'
num_points = 8
sort_by = id
warn_discontinuous_face_values = false
[]
[y_vs_tf]
type = LineValueSampler
variable = 'T_fluid'
start_point = '0.05 1e-9 0' # making sure we are always in the domain
end_point = '0.05 ${fparse b-1e-9} 0'
num_points = 12
sort_by = id
warn_discontinuous_face_values = false
[]
[]
[Executioner]
type = SIMPLE
num_iterations = 1000
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
rhie_chow_user_object = 'rc'
momentum_l_abs_tol = 1e-10
pressure_l_abs_tol = 1e-10
momentum_l_tol = 0
pressure_l_tol = 0
momentum_equation_relaxation = 0.9
pressure_variable_relaxation = 0.3
momentum_absolute_tolerance = 1e-7
pressure_absolute_tolerance = 1e-7
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_system = 'energy_system'
solid_energy_system = 'solid_energy_system'
energy_l_abs_tol = 1e-10
solid_energy_l_abs_tol = 1e-10
energy_l_tol = 0
solid_energy_l_tol = 0
energy_equation_relaxation = 1.0
energy_absolute_tolerance = 1e-7
solid_energy_absolute_tolerance = 1e-7
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
solid_energy_petsc_options_iname = '-pc_type -pc_hypre_type'
solid_energy_petsc_options_value = 'hypre boomeramg'
cht_interfaces = 'interface'
cht_solid_flux_relaxation = 0.4
cht_fluid_flux_relaxation = 0.4
cht_solid_temperature_relaxation = 0.4
cht_fluid_temperature_relaxation = 0.4
max_cht_fpi = 3
print_fields = false
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/1d-simple-channel/form-loss-orientation.i)
# Isolated form-loss orientation check. Equal porosity removes the reversible Bernoulli jump,
# so the remaining pressure drop is the irreversible form loss of 0.1.
mu = 0.0
rho = 2.0
advected_interp_method = 'average'
inlet_u = 0.1
form_loss = 10
primary_block = 1
paired_block = 2
velocity_inlet_boundary = left
pressure_outlet_boundary = right
direction = 1
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5'
ix = '8 8'
subdomain_id = '1 2'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = ${primary_block}
paired_block = ${paired_block}
new_boundary = 'baffle'
[]
[]
[Problem]
linear_sys_names = 'u_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle'
porosity = porosity
density = ${rho}
form_loss = ${form_loss}
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
# Dampen the quadratic form-loss feedback during the SIMPLE outer iteration.
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${inlet_u}
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${velocity_inlet_boundary}
variable = superficial_u
functor = ${inlet_u}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = ${pressure_outlet_boundary}
variable = superficial_u
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = ${pressure_outlet_boundary}
variable = pressure
functor = 0.0
[]
[]
[FunctorMaterials]
[porosity]
type = GenericFunctorMaterial
prop_names = porosity
prop_values = 1
[]
[]
[Postprocessors]
[p_left]
type = SideAverageValue
variable = pressure
boundary = left
[]
[p_right]
type = SideAverageValue
variable = pressure
boundary = right
[]
[directed_pressure_loss]
type = ParsedPostprocessor
expression = '${direction} * (p_left - p_right)'
pp_names = 'p_left p_right'
[]
[u_avg]
type = ElementAverageValue
variable = superficial_u
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.3
pressure_variable_relaxation = 0.1
# All four orientations recover the analytic solution within 500 iterations.
num_iterations = 500
pressure_absolute_tolerance = 1e-10
# The exact superficial velocity is uniform, so the momentum normalization factor nearly vanishes
# and the normalized momentum residual measures round-off, which cycles at a level that depends
# on the partitioning. Only the pressure residual is used as a convergence criterion.
momentum_absolute_tolerance = 1
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/linear-segregated/reconstructed-gradient.i)
mu = 1
rho = 1
flow_block = 2
restricted_blocks = '${flow_block}'
inlet_speed = 1
[Mesh]
[blocks]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
dy = '1'
ix = '1 2 1'
iy = '1'
subdomain_id = '1 ${flow_block} 3'
[]
[internal_inlet]
type = SideSetsBetweenSubdomainsGenerator
input = blocks
primary_block = ${flow_block}
paired_block = 1
new_boundary = internal_inlet
[]
[internal_outlet]
type = SideSetsBetweenSubdomainsGenerator
input = internal_inlet
primary_block = ${flow_block}
paired_block = 3
new_boundary = internal_outlet
[]
[delete_outside_blocks]
type = BlockDeletionGenerator
input = internal_outlet
block = '1 3'
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = ${rho}
p_diffusion_kernel = p_diffusion
block = ${restricted_blocks}
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
initial_condition = 0
solver_sys = u_system
block = ${restricted_blocks}
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
block = ${restricted_blocks}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
block = ${restricted_blocks}
gradient_method = reconstructed
[]
[]
[FVGradientMethods]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = green-gauss
# This moderate relaxation exposes the orientation feedback within the short regression.
gradient_relaxation = 0.5
[]
[]
[FVInterpolationMethods]
[average]
type = FVGeometricAverage
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = average
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = x
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
advected_interp_method_name = average
mu = ${mu}
u = vel_x
v = vel_y
momentum_component = y
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = x
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = y
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[]
[LinearFVBCs]
[prescribed-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'internal_inlet top bottom'
variable = vel_x
functor = ${inlet_speed}
[]
[prescribed-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'internal_inlet top bottom'
variable = vel_y
functor = 0
[]
[pressure-flux]
type = LinearFVPressureFluxBC
boundary = 'internal_inlet top bottom'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
u = vel_x
v = vel_y
rho = ${rho}
[]
[outlet-pressure]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = internal_outlet
variable = pressure
functor = 0
[]
[outlet-u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = internal_outlet
[]
[outlet-v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = internal_outlet
[]
[]
[Functions]
[exact-u]
type = ParsedFunction
expression = ${inlet_speed}
[]
[exact-zero]
type = ParsedFunction
expression = 0
[]
[]
[Postprocessors]
[inlet-mass-flow]
type = VolumetricFlowRate
boundary = internal_inlet
vel_x = vel_x
vel_y = vel_y
advected_quantity = ${rho}
rhie_chow_user_object = rc
[]
[u-error]
type = ElementL2FunctorError
approximate = vel_x
exact = exact-u
block = ${flow_block}
[]
[v-error]
type = ElementL2FunctorError
approximate = vel_y
exact = exact-zero
block = ${flow_block}
[]
[pressure-error]
type = ElementL2FunctorError
approximate = pressure
exact = exact-zero
block = ${flow_block}
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
momentum_equation_relaxation = 0.8
pressure_variable_relaxation = 0.3
# Three iterations let the first reconstructed candidate feed a subsequent momentum predictor.
num_iterations = 3
continue_on_max_its = true
pressure_absolute_tolerance = 1e-10
momentum_absolute_tolerance = 1e-10
momentum_petsc_options_iname = '-pc_type'
momentum_petsc_options_value = 'lu'
pressure_petsc_options_iname = '-pc_type'
pressure_petsc_options_value = 'lu'
print_fields = false
[]
[Outputs]
csv = true
execute_on = FINAL
[]