- boundaryThe list of boundary IDs from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundary IDs from the mesh where this object applies
- variableThe name of the variable that this boundary condition applies to
C++ Type:NonlinearVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this boundary condition applies to
WCNSFVSwitchableInletVelocityBC
Adds switchable inlet-velocity boundary conditionfor weakly compressible flows.
The file is similar to WCNSFVInletVelocityBC but it allows the boundary conditions to be switched on/off.
The switch_bc parameter is a boolean that is used to turn the boundary condition on/off. The parameter is controllable during runtime and can be controlled via a BoolFunctionControl.
The switch works as follows:
If
switch = true: the boundary condition is applied as described in WCNSFVInletVelocityBC.If
switch = false: the boundary condition is not applied and a single sided extrapolation to the boundary is applied from internal extrapolation.
In both cases, the interpolated value at the face is controlled by face_limiter. By default, face_limiter = 1.0. face_limiter value is controllable during runtime.
Example input syntax
In this example input, the boundary conditions to the mass conservation equation and the momentum equations are specified using two WCNSFVSwitchableInletVelocityBC, one for each component of the velocity. The inlet velocity is specified using a mass flow rate postprocessor.
[FVBCs<<<{"href": "../../syntax/FVBCs/index.html"}>>>]
# Inlet
[inlet_u]
type = WCNSFVInletVelocityBC<<<{"description": "Defines a Dirichlet boundary condition for finite volume method.", "href": "WCNSFVInletVelocityBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = u
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = 'left'
mdot_pp<<<{"description": "Postprocessor with the inlet mass flow rate"}>>> = 'inlet_mdot'
area_pp<<<{"description": "Inlet area as a postprocessor"}>>> = 'surface_inlet'
rho<<<{"description": "Density functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = 'rho'
[]
[inlet_v]
type = WCNSFVInletVelocityBC<<<{"description": "Defines a Dirichlet boundary condition for finite volume method.", "href": "WCNSFVInletVelocityBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = v
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = 'left'
mdot_pp<<<{"description": "Postprocessor with the inlet mass flow rate"}>>> = 0
area_pp<<<{"description": "Inlet area as a postprocessor"}>>> = 'surface_inlet'
rho<<<{"description": "Density functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = 'rho'
[]
[inlet_T]
type = WCNSFVInletTemperatureBC<<<{"description": "Defines a Dirichlet boundary condition for finite volume method.", "href": "WCNSFVInletTemperatureBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = T
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = 'left'
temperature_pp<<<{"description": "Postprocessor with the inlet temperature"}>>> = 'inlet_T'
[]
[outlet_p]
type = INSFVOutletPressureBC<<<{"description": "Defines a Dirichlet boundary condition for finite volume method.", "href": "INSFVOutletPressureBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = pressure
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = 'right'
function<<<{"description": "The boundary pressure as a regular function"}>>> = ${outlet_pressure}
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC<<<{"description": "Implements a no slip boundary condition.", "href": "INSFVNoSlipWallBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = u
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = 'top bottom'
function<<<{"description": "The exact solution function."}>>> = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC<<<{"description": "Implements a no slip boundary condition.", "href": "INSFVNoSlipWallBC.html"}>>>
variable<<<{"description": "The name of the variable that this boundary condition applies to"}>>> = v
boundary<<<{"description": "The list of boundary IDs from the mesh where this object applies"}>>> = 'top bottom'
function<<<{"description": "The exact solution function."}>>> = 0
[]
[]Input Parameters
- area_ppInlet area as a postprocessor
C++ Type:PostprocessorName
Unit:(no unit assumed)
Controllable:No
Description:Inlet area as a postprocessor
- displacementsThe displacements
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:The displacements
- face_limiter1Face flux limiter.
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:Yes
Description:Face flux limiter.
- matrix_onlyFalseWhether this object is only doing assembly to matrices (no vectors)
Default:False
C++ Type:bool
Controllable:No
Description:Whether this object is only doing assembly to matrices (no vectors)
- mdot_ppPostprocessor with the inlet mass flow rate
C++ Type:PostprocessorName
Unit:(no unit assumed)
Controllable:No
Description:Postprocessor with the inlet mass flow rate
- rhoDensity functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Density functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- scaling_factor1To scale the velocity
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:To scale the velocity
- switch_bcTrueSwitch on (true) / off (false) for boundary condition.
Default:True
C++ Type:bool
Controllable:Yes
Description:Switch on (true) / off (false) for boundary condition.
- velocity_ppPostprocessor with the inlet velocity
C++ Type:PostprocessorName
Unit:(no unit assumed)
Controllable:No
Description:Postprocessor with the inlet velocity
Optional Parameters
- absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution
C++ Type:std::vector<TagName>
Controllable:No
Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Controllable:No
Description:The tag for the vectors this Kernel should fill
Contribution To Tagged Field Data Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.