- T_fluidFluid temperature. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Fluid temperature. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- hSpecific Enthalpy. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Specific Enthalpy. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- pressurePressure. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Pressure. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
LinearFVEnthalpyFunctorMaterial
This FunctorMaterial class is needed when the user wants to solve for the enthalpy conservation for the linear finite-volume implementation of the incompressible/weakly-compressible Navier-Stokes equations.
This material class defines the functors to convert from specific enthalpy and pressure to temperature ('T_from_p_h') and to convert from temperature and pressure to specific enthalpy ('h_from_p_T').
When solving the enthalpy conservation equation and obtaining the specific enthalpy () as the solution, two functors are required. The 'T_from_p_h' functor computes the temperature field, which is then used to evaluate temperature-dependent thermophysical properties. The 'h_from_p_T' functor is primarily utilized for setting boundary conditions where the temperature is specified.
The specific enthalpy is defined as:
where
is the pressure and temperature-dependent specific heat
is a reference temperature where the reference enthalpy is defined
Example input syntax 1: Fluid Properties
In this input, a LinearFVEnthalpyFunctorMaterial is defined to solve for a 1D heated channel using lead fluid properties with a fixed mass flux.
The FluidProperties object for lead is defined in
[FluidProperties<<<{"href": "../../syntax/FluidProperties/index.html"}>>>]
[lead]
type = LeadFluidProperties<<<{"description": "Fluid properties for Lead", "href": "../fluidproperties/LeadFluidProperties.html"}>>>
[]
[](modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)Then, the LinearFVEnthalpyFunctorMaterial is defined taking the FluidProperties object as an input, which already contains the 'h_from_p_T' and 'T_from_p_h' functors defined.
[FunctorMaterials<<<{"href": "../../syntax/FunctorMaterials/index.html"}>>>]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial<<<{"description": "Creates functors for conversions between specific enthalpy and temperature", "href": "LinearFVEnthalpyFunctorMaterial.html"}>>>
pressure<<<{"description": "Pressure. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = ${p_ref}
T_fluid<<<{"description": "Fluid temperature. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = T
h<<<{"description": "Specific Enthalpy. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = h
fp<<<{"description": "Fluid properties userobject"}>>> = lead
[]
[](modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)Example input syntax 2: User-Defined Properties
In this input, a LinearFVEnthalpyFunctorMaterial is defined to solve for a 1D heated channel using FLiNaK properties with a fixed mass flux, defined by the user.
[FunctorMaterials<<<{"href": "../../syntax/FunctorMaterials/index.html"}>>>]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial<<<{"description": "Creates functors for conversions between specific enthalpy and temperature", "href": "LinearFVEnthalpyFunctorMaterial.html"}>>>
pressure<<<{"description": "Pressure. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = ${p_ref}
T_fluid<<<{"description": "Fluid temperature. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = T
h<<<{"description": "Specific Enthalpy. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = h
h_from_p_T_functor<<<{"description": "User specified enthalpy from temperature functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = h_from_p_T_functor
T_from_p_h_functor<<<{"description": "User specified temperature from enthalpy functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number."}>>> = T_from_p_h_functor
[]
[](modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)This functor material takes the user-defined 'h_from_p_T' and 'T_from_p_h' functors as inputs. The functors are defined in
[FunctorMaterials<<<{"href": "../../syntax/FunctorMaterials/index.html"}>>>]
[h_from_p_T_functor]
type = ParsedFunctorMaterial<<<{"description": "Computes a functor material from a parsed expression of other functors.", "href": "ParsedFunctorMaterial.html"}>>>
property_name<<<{"description": "Name to give the new functor material property"}>>> = 'h_from_p_T_functor'
functor_names<<<{"description": "Functors to use in the parsed expression"}>>> = 'T'
expression<<<{"description": "Expression to parse for the new functor material"}>>> = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[](modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)[FunctorMaterials<<<{"href": "../../syntax/FunctorMaterials/index.html"}>>>]
[T_from_p_h_functor]
type = ParsedFunctorMaterial<<<{"description": "Computes a functor material from a parsed expression of other functors.", "href": "ParsedFunctorMaterial.html"}>>>
property_name<<<{"description": "Name to give the new functor material property"}>>> = 'T_from_p_h_functor'
functor_names<<<{"description": "Functors to use in the parsed expression"}>>> = 'h'
expression<<<{"description": "Expression to parse for the new functor material"}>>> = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[](modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)for the linear specific heat:
[FunctorMaterials<<<{"href": "../../syntax/FunctorMaterials/index.html"}>>>]
[cp]
type = ADParsedFunctorMaterial<<<{"description": "Computes a functor material from a parsed expression of other functors.", "href": "ParsedFunctorMaterial.html"}>>>
property_name<<<{"description": "Name to give the new functor material property"}>>> = 'cp'
functor_names<<<{"description": "Functors to use in the parsed expression"}>>> = 'T'
expression<<<{"description": "Expression to parse for the new functor material"}>>> = '${A_cp}+${B_cp}*T'
[]
[](modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)If using user-defined properties, it is the responsibility of the user to update these properties often enough. For example auxiliary variable properties would only be updated at the end of every time step by default, which would introduce a lag.
Input Parameters
- T_from_p_h_functorUser specified temperature from enthalpy functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:User specified temperature from enthalpy functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- execute_onALWAYSThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:ALWAYS
C++ Type:ExecFlagEnum
Options:XFEM_MARK, FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, LINEAR_CONVERGENCE, NONLINEAR, NONLINEAR_CONVERGENCE, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, MULTIAPP_FIXED_POINT_CONVERGENCE, MULTISYSTEM_FIXED_POINT_ITERATION_END, FINAL, CUSTOM, ALWAYS
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- fpFluid properties userobject
C++ Type:UserObjectName
Controllable:No
Description:Fluid properties userobject
- h_from_p_T_functorUser specified enthalpy from temperature functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:User specified enthalpy from temperature functor. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- search_methodnearest_node_connected_sidesChoice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
Default:nearest_node_connected_sides
C++ Type:MooseEnum
Options:nearest_node_connected_sides, all_proximate_sides
Controllable:No
Description:Choice of search algorithm. All options begin by finding the nearest node in the primary boundary to a query point in the secondary boundary. In the default nearest_node_connected_sides algorithm, primary boundary elements are searched iff that nearest node is one of their nodes. This is fast to determine via a pregenerated node-to-elem map and is robust on conforming meshes. In the optional all_proximate_sides algorithm, primary boundary elements are searched iff they touch that nearest node, even if they are not topologically connected to it. This is more CPU-intensive but is necessary for robustness on any boundary surfaces which has disconnections (such as Flex IGA meshes) or non-conformity (such as hanging nodes in adaptively h-refined meshes).
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
Outputs Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/enthalpy_equation.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy-fluid-only.i)
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)
L = 30
nx = 600
bulk_u = 0.01
p_ref = 101325.0
T_in = 860.
q_source = 20000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*240.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = ${T_in}
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u}
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[FluidProperties]
[lead]
type = LeadFluidProperties
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
fp = lead
[]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = lead
pressure = ${p_ref}
T_fluid = 'T'
speed = 1
porosity = 1
characteristic_length = 1
[]
[source_func]
type = ADParsedFunctorMaterial
property_name = source_func
functor_names = 'rho'
expression = ${q_source}
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)
L = 30
nx = 600
bulk_u = 0.01
p_ref = 101325.0
T_in = 860.
q_source = 20000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*240.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = ${T_in}
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u}
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[FluidProperties]
[lead]
type = LeadFluidProperties
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
fp = lead
[]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = lead
pressure = ${p_ref}
T_fluid = 'T'
speed = 1
porosity = 1
characteristic_length = 1
[]
[source_func]
type = ADParsedFunctorMaterial
property_name = source_func
functor_names = 'rho'
expression = ${q_source}
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
L = 30
nx = 600
bulk_u = 0.01
q_source = 50000.
A_cp = 976.78
B_cp = 1.0634
T_in = 860.
p_ref = 101325.0
rho = 2000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*1900.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 860.
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = ${q_source}
[]
[T_analytical]
type = ParsedFunction
expression = ${fparse (-A_cp+sqrt(A_cp^2-2*B_cp*(-q_source/rho/bulk_u*L-A_cp*T_in-B_cp/2*T_in*T_in)))/B_cp}
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = 'h_from_p_T_functor'
functor_names = 'T'
expression = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = 'T_from_p_h_functor'
functor_names = 'h'
expression = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[rho]
type = ADParsedFunctorMaterial
property_name = 'rho'
functor_names = 'T'
expression = ${rho}
[]
[cp]
type = ADParsedFunctorMaterial
property_name = 'cp'
functor_names = 'T'
expression = '${A_cp}+${B_cp}*T'
[]
[mu]
type = ADParsedFunctorMaterial
property_name = 'mu'
functor_names = 'T'
expression = '4.5e-3'
[]
[k]
type = ADParsedFunctorMaterial
property_name = 'k'
functor_names = 'T'
expression = 0.7
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[T_out_analytic]
type = FunctionValuePostprocessor
function = T_analytical
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
L = 30
nx = 600
bulk_u = 0.01
q_source = 50000.
A_cp = 976.78
B_cp = 1.0634
T_in = 860.
p_ref = 101325.0
rho = 2000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*1900.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 860.
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = ${q_source}
[]
[T_analytical]
type = ParsedFunction
expression = ${fparse (-A_cp+sqrt(A_cp^2-2*B_cp*(-q_source/rho/bulk_u*L-A_cp*T_in-B_cp/2*T_in*T_in)))/B_cp}
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = 'h_from_p_T_functor'
functor_names = 'T'
expression = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = 'T_from_p_h_functor'
functor_names = 'h'
expression = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[rho]
type = ADParsedFunctorMaterial
property_name = 'rho'
functor_names = 'T'
expression = ${rho}
[]
[cp]
type = ADParsedFunctorMaterial
property_name = 'cp'
functor_names = 'T'
expression = '${A_cp}+${B_cp}*T'
[]
[mu]
type = ADParsedFunctorMaterial
property_name = 'mu'
functor_names = 'T'
expression = '4.5e-3'
[]
[k]
type = ADParsedFunctorMaterial
property_name = 'k'
functor_names = 'T'
expression = 0.7
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[T_out_analytic]
type = FunctionValuePostprocessor
function = T_analytical
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
L = 30
nx = 600
bulk_u = 0.01
q_source = 50000.
A_cp = 976.78
B_cp = 1.0634
T_in = 860.
p_ref = 101325.0
rho = 2000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*1900.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 860.
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = ${q_source}
[]
[T_analytical]
type = ParsedFunction
expression = ${fparse (-A_cp+sqrt(A_cp^2-2*B_cp*(-q_source/rho/bulk_u*L-A_cp*T_in-B_cp/2*T_in*T_in)))/B_cp}
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = 'h_from_p_T_functor'
functor_names = 'T'
expression = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = 'T_from_p_h_functor'
functor_names = 'h'
expression = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[rho]
type = ADParsedFunctorMaterial
property_name = 'rho'
functor_names = 'T'
expression = ${rho}
[]
[cp]
type = ADParsedFunctorMaterial
property_name = 'cp'
functor_names = 'T'
expression = '${A_cp}+${B_cp}*T'
[]
[mu]
type = ADParsedFunctorMaterial
property_name = 'mu'
functor_names = 'T'
expression = '4.5e-3'
[]
[k]
type = ADParsedFunctorMaterial
property_name = 'k'
functor_names = 'T'
expression = 0.7
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[T_out_analytic]
type = FunctionValuePostprocessor
function = T_analytical
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
L = 30
nx = 600
bulk_u = 0.01
q_source = 50000.
A_cp = 976.78
B_cp = 1.0634
T_in = 860.
p_ref = 101325.0
rho = 2000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*1900.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 860.
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = ${q_source}
[]
[T_analytical]
type = ParsedFunction
expression = ${fparse (-A_cp+sqrt(A_cp^2-2*B_cp*(-q_source/rho/bulk_u*L-A_cp*T_in-B_cp/2*T_in*T_in)))/B_cp}
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = 'h_from_p_T_functor'
functor_names = 'T'
expression = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = 'T_from_p_h_functor'
functor_names = 'h'
expression = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[rho]
type = ADParsedFunctorMaterial
property_name = 'rho'
functor_names = 'T'
expression = ${rho}
[]
[cp]
type = ADParsedFunctorMaterial
property_name = 'cp'
functor_names = 'T'
expression = '${A_cp}+${B_cp}*T'
[]
[mu]
type = ADParsedFunctorMaterial
property_name = 'mu'
functor_names = 'T'
expression = '4.5e-3'
[]
[k]
type = ADParsedFunctorMaterial
property_name = 'k'
functor_names = 'T'
expression = 0.7
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[T_out_analytic]
type = FunctionValuePostprocessor
function = T_analytical
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h_fp.i)
L = 30
nx = 600
bulk_u = 0.01
p_ref = 101325.0
T_in = 860.
q_source = 20000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*240.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = ${T_in}
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u}
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[FluidProperties]
[lead]
type = LeadFluidProperties
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
fp = lead
[]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = lead
pressure = ${p_ref}
T_fluid = 'T'
speed = 1
porosity = 1
characteristic_length = 1
[]
[source_func]
type = ADParsedFunctorMaterial
property_name = source_func
functor_names = 'rho'
expression = ${q_source}
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy.i)
# Steady conjugate heat transfer from a heated solid to fluid in a 0.5-m porous block.
# The solid fraction scales the 20 MW/m^3 source to 10 MW/m^3. Conservation therefore gives
# u_block_2 = 2, T_fluid_out = 300.59523809524, and h_fluid_out = 1262500.
# For 10 upwind cells, T_fluid_block_2 = 300.32738095238. The local balance gives
# T_solid_block_2 - T_fluid_block_2 = 10e6 / 30000 = 333.33333333333,
# hence T_solid_block_2 = 633.66071428571.
mu = 2e-3
rho = 1000
advected_interp_method = 'upwind'
u_in = 2
forchheimer = 0
bf = '0 0'
cp_fluid = 4200
cp_solid = 500
k_fluid = 0.4
k_solid = 0.2
h_vol = 30000
q_solid = 20000000
T_inlet = 300
T_initial = 300
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
dy = '0.5'
ix = '10 10 10'
iy = '3'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle2
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system solid_energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
form_loss = ${bf}
reference_velocity_side = 'lower_porosity higher_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[h_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = '${fparse cp_fluid * T_initial}'
[]
[T_solid]
type = MooseLinearVariableFVReal
solver_sys = solid_energy_system
initial_condition = ${T_initial}
block = 2
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[fluid_advection]
type = LinearFVEnergyAdvection
variable = h_fluid
advected_quantity = enthalpy
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = rc
[]
[fluid_diffusion]
type = LinearFVDiffusion
variable = h_fluid
diffusion_coeff = kappa_fluid
use_nonorthogonal_correction = false
[]
[fluid_exchange]
type = LinearFVEnthalpyVolumetricHeatTransfer
variable = h_fluid
h_solid_fluid = h_vol
cp = cp_fluid
T_fluid = T_fluid
T_solid = T_solid
is_solid = false
block = 2
[]
[fluid_source]
type = LinearFVSource
variable = h_fluid
source_density = q_fluid_scaled
[]
[solid_diffusion]
type = LinearFVDiffusion
variable = T_solid
diffusion_coeff = ${k_solid}
use_nonorthogonal_correction = false
block = 2
[]
[solid_exchange]
type = LinearFVEnthalpyVolumetricHeatTransfer
variable = T_solid
h_solid_fluid = h_vol
cp = 1.0
T_fluid = T_fluid
T_solid = T_solid
is_solid = true
block = 2
[]
[solid_source]
type = LinearFVSource
variable = T_solid
source_density = q_solid_scaled
block = 2
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_3 bottom_to_1 bottom_to_3 top_to_2 bottom_to_2'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_1 top_to_3 bottom_to_1 bottom_to_3 top_to_2 bottom_to_2'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[pressure-extrapolation]
type = LinearFVPressureFluxBC
boundary = 'bottom_to_1 bottom_to_2 bottom_to_3 top_to_1 top_to_2 top_to_3'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[left_T_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = T_fluid
functor = ${T_inlet}
[]
[left_h_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = h_fluid
functor = h_from_p_T
[]
[walls_h_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'top_to_1 top_to_2 top_to_3 bottom_to_1 bottom_to_2 bottom_to_3'
variable = h_fluid
functor = 0.0
diffusion_coeff = kappa_fluid
[]
[outlet_h_fluid]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = h_fluid
use_two_term_expansion = false
[]
[solid_zero_flux]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'baffle baffle2 top_to_2 bottom_to_2'
variable = T_solid
functor = 0.0
diffusion_coeff = kappa_solid
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer} ${forchheimer} ${forchheimer}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 1.0 2 0.5 3 1.0'
[]
[fluid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_fluid kappa_fluid h_vol q_fluid_scaled'
prop_values = '${cp_fluid} ${fparse k_fluid/cp_fluid} ${h_vol} 0'
[]
[solid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_solid kappa_solid'
prop_values = '${cp_solid} ${fparse k_solid/cp_solid}'
[]
[q_solid]
type = GenericFunctorMaterial
prop_names = 'q_solid'
prop_values = ${q_solid}
block = 2
[]
[q_solid_scaled]
type = ParsedFunctorMaterial
property_name = q_solid_scaled
functor_names = 'porosity q_solid'
expression = '(1 - porosity) * q_solid'
block = 2
[]
[fluid_enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = pressure
T_fluid = T_fluid
h = h_fluid
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = h_from_p_T_functor
functor_names = 'T_fluid'
expression = '${cp_fluid} * T_fluid'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = T_from_p_h_functor
functor_names = 'h_fluid'
expression = 'h_fluid / ${cp_fluid}'
[]
[]
[Postprocessors]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[T_fluid_out]
type = SideAverageValue
variable = T_fluid
boundary = right
[]
[T_fluid_block_2]
type = ElementAverageValue
variable = T_fluid
block = 2
[]
[T_solid_block_2]
type = ElementAverageValue
variable = T_solid
block = 2
[]
[h_fluid_out]
type = SideAverageValue
variable = h_fluid
boundary = right
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[T_fluid]
type = MooseLinearVariableFVReal
initial_condition = ${T_initial}
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'NONLINEAR'
[]
[fluid_temperature]
type = FunctorAux
variable = T_fluid
functor = T_from_p_h
execute_on = 'NONLINEAR'
[]
[]
[VectorPostprocessors]
# Sample each x-cell once at its center.
[centerline]
type = LineValueSampler
variable = 'superficial_u T_fluid T_solid'
start_point = '0.0119047619047619 0.25 0'
end_point = '1.4880952380952381 0.25 0'
num_points = 30
sort_by = x
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
solid_energy_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
solid_energy_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
energy_system = energy_system
solid_energy_system = solid_energy_system
momentum_equation_relaxation = 0.2
pressure_variable_relaxation = 0.1
energy_equation_relaxation = 0.8
num_iterations = 1000
# These outer tolerances stop once the velocity and zero-pressure fields have stabilized to
# substantially below the accuracy exercised by the temperature and velocity profile checks.
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-2
energy_absolute_tolerance = 1e-8
solid_energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
solid_energy_petsc_options_iname = '-pc_type -pc_hypre_type'
solid_energy_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/1d_test_h.i)
L = 30
nx = 600
bulk_u = 0.01
q_source = 50000.
A_cp = 976.78
B_cp = 1.0634
T_in = 860.
p_ref = 101325.0
rho = 2000.
advected_interp_method = 'upwind'
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = ${L}
nx = ${nx}
[]
allow_renumbering = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
u = vel_x
[]
[Problem]
linear_sys_names = 'u_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = ${fparse 860.*1900.}
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 860.
[]
[h_aux]
type = MooseLinearVariableFVReal
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
advected_interp_method_name = ${advected_interp_method}
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
[]
[source]
type = LinearFVSource
variable = h
source_density = source_func
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = 'h_from_p_T'
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = ${T_in}
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = 'right'
[]
[]
[Functions]
[source_func]
type = ParsedFunction
expression = ${q_source}
[]
[T_analytical]
type = ParsedFunction
expression = ${fparse (-A_cp+sqrt(A_cp^2-2*B_cp*(-q_source/rho/bulk_u*L-A_cp*T_in-B_cp/2*T_in*T_in)))/B_cp}
[]
[]
[FunctorMaterials]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = 'h_from_p_T_functor'
functor_names = 'T'
expression = '${A_cp}*T+${B_cp}/2*(T^2)'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = 'T_from_p_h_functor'
functor_names = 'h'
expression = '(-${A_cp}+sqrt(${A_cp}^2+2*h*${B_cp}))/${B_cp}'
[]
[rho]
type = ADParsedFunctorMaterial
property_name = 'rho'
functor_names = 'T'
expression = ${rho}
[]
[cp]
type = ADParsedFunctorMaterial
property_name = 'cp'
functor_names = 'T'
expression = '${A_cp}+${B_cp}*T'
[]
[mu]
type = ADParsedFunctorMaterial
property_name = 'mu'
functor_names = 'T'
expression = '4.5e-3'
[]
[k]
type = ADParsedFunctorMaterial
property_name = 'k'
functor_names = 'T'
expression = 0.7
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor_aux]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[h_from_T_functor_aux]
type = FunctorAux
functor = 'h_from_p_T'
variable = 'h_aux'
execute_on = 'NONLINEAR'
[]
[]
[Postprocessors]
[T_out_sim]
type = ElementalVariableValue
variable = T
elementid = ${fparse nx-1}
[]
[T_out_analytic]
type = FunctionValuePostprocessor
function = T_analytical
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-12
pressure_l_abs_tol = 1e-12
energy_l_abs_tol = 1e-12
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.95
num_iterations = 100
pressure_absolute_tolerance = 1e-8
momentum_absolute_tolerance = 1e-8
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 200
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
[out]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/enthalpy_equation/enthalpy_equation.i)
H = 0.015 #halfwidth of the channel, 10 cm of channel height
L = 1
bulk_u = 0.01
p_ref = 101325.0
advected_interp_method = 'upwind'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${L}
ymin = -${H}
ymax = ${H}
nx = 30
ny = 15
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[rc]
type = RhieChowMassFlux
u = vel_x
v = vel_y
pressure = pressure
rho = 'rho'
p_diffusion_kernel = p_diffusion
[]
[]
[Variables]
[vel_x]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${bulk_u}
[]
[vel_y]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = ${p_ref}
[]
[h]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = 44000 # 1900 is an approx of cp(T)
[]
[]
[AuxVariables]
[rho_var]
type = MooseLinearVariableFVReal
[]
[cp_var]
type = MooseLinearVariableFVReal
[]
[mu_var]
type = MooseLinearVariableFVReal
[]
[k_var]
type = MooseLinearVariableFVReal
[]
[T]
type = MooseLinearVariableFVReal
initial_condition = 777.
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[LinearFVKernels]
[u_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_x
mu = 'mu'
momentum_component = 'x'
use_nonorthogonal_correction = false
advected_interp_method_name = ${advected_interp_method}
rhie_chow_user_object = 'rc'
u = vel_x
v = vel_y
[]
[u_pressure]
type = LinearFVMomentumPressure
variable = vel_x
pressure = pressure
momentum_component = 'x'
[]
[v_advection_stress]
type = LinearWCNSFVMomentumFlux
variable = vel_y
mu = 'mu'
momentum_component = 'y'
use_nonorthogonal_correction = false
advected_interp_method_name = ${advected_interp_method}
rhie_chow_user_object = 'rc'
u = vel_x
v = vel_y
[]
[v_pressure]
type = LinearFVMomentumPressure
variable = vel_y
pressure = pressure
momentum_component = 'y'
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusion
variable = pressure
diffusion_tensor = Ainv
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[temp_conduction]
type = LinearFVDiffusion
diffusion_coeff = 'alpha'
variable = h
[]
[temp_advection]
type = LinearFVEnergyAdvection
variable = h
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[]
[LinearFVBCs]
[inlet_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_x
functor = ${bulk_u} #${bulk_u} #'fully_developed_velocity'
[]
[inlet-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'left'
variable = vel_y
functor = 0
[]
[inlet_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'left'
functor = h_from_p_T # ${fparse 1900.*860.}
[]
[inlet_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'left'
functor = 860.
[]
[walls-u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = vel_x
boundary = 'top bottom'
functor = 0.
[]
[walls-v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = vel_y
boundary = 'top bottom'
functor = 0.
[]
[walls_h]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = h
boundary = 'top bottom'
functor = h_from_p_T # ${fparse 1900. * 950}
[]
[walls_T]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
variable = T
boundary = 'top bottom'
functor = 950.
[]
[walls_p]
type = LinearFVExtrapolatedPressureBC
boundary = 'top bottom'
variable = pressure
use_two_term_expansion = false
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = 'right'
variable = pressure
functor = ${p_ref}
[]
[outlet_h]
type = LinearFVAdvectionDiffusionOutflowBC
variable = h
use_two_term_expansion = false
boundary = 'right'
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_x
use_two_term_expansion = false
boundary = right
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
variable = vel_y
use_two_term_expansion = false
boundary = right
[]
[]
[FluidProperties]
[lead]
type = LeadFluidProperties
[]
[]
[FunctorMaterials]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = lead
pressure = ${p_ref}
T_fluid = 'T'
speed = 1
porosity = 1
characteristic_length = 1
[]
[alpha]
type = ADParsedFunctorMaterial
property_name = 'alpha'
functor_names = 'k cp'
expression = 'k/cp'
[]
[enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = ${p_ref}
T_fluid = T
h = h
fp = lead
[]
[]
[AuxKernels]
[rho_out]
type = FunctorAux
functor = 'rho'
variable = 'rho_var'
execute_on = 'NONLINEAR'
[]
[cp_out]
type = FunctorAux
functor = 'cp'
variable = 'cp_var'
execute_on = 'NONLINEAR'
[]
[mu_out]
type = FunctorAux
functor = 'mu'
variable = 'mu_var'
execute_on = 'NONLINEAR'
[]
[k_out]
type = FunctorAux
functor = 'k'
variable = 'k_var'
execute_on = 'NONLINEAR'
[]
[T_from_h_functor]
type = FunctorAux
functor = 'T_from_p_h'
variable = 'T'
execute_on = 'NONLINEAR'
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-6
pressure_l_abs_tol = 1e-6
energy_l_abs_tol = 1e-8
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = 'rc'
momentum_systems = 'u_system v_system'
pressure_system = 'pressure_system'
energy_system = 'energy_system'
momentum_equation_relaxation = 0.7
pressure_variable_relaxation = 0.3
energy_equation_relaxation = 0.9
num_iterations = 200
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-6
energy_absolute_tolerance = 1e-6
print_fields = false
momentum_l_max_its = 1000
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
continue_on_max_its = true
[]
[Outputs]
exodus = true
execute_on = 'TIMESTEP_BEGIN FINAL'
[out]
type = Checkpoint
execute_on = 'TIMESTEP_END'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/linear-segregated/2d-simple-channel-enthalpy/porous-baffle-2d-enthalpy-fluid-only.i)
# Steady fluid-only enthalpy transport through a 0.5-m heated porous block.
# With rho = 1000, u = 2, cp = 4200, and q = 20 MW/m^3, conservation gives
# u_block_2 = 2, T_fluid_out = 301.19047619048, and h_fluid_out = 1265000.
# For 10 upwind cells in the heated block, T_fluid_block_2 = 300.65476190476.
mu = 2e-3
rho = 1000
advected_interp_method = 'upwind'
u_in = 2
forchheimer = 0
bf = '0 0'
cp_fluid = 4200
k_fluid = 0.4
h_vol = 300
T_inlet = 300
T_initial = 300
q = 20000000
[FVGradientMethods]
[jump_aware]
type = FVPressureJumpGreenGaussGradient
[]
[velocity_jump_aware]
type = FVVelocityJumpGreenGaussGradient
[]
[reconstructed]
type = FVReconstructedPressureGradient
base_gradient_method = jump_aware
gradient_relaxation = 1.0
[]
[]
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5 0.5'
dy = '0.5'
ix = '10 10 10'
iy = '3'
subdomain_id = '1 2 3'
[]
[baffle]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
primary_block = '1'
paired_block = '2'
new_boundary = 'baffle'
[]
[baffle2]
type = SideSetsBetweenSubdomainsGenerator
input = baffle
primary_block = '2'
paired_block = '3'
new_boundary = 'baffle2'
[]
[split_top_bottom]
type = BreakBoundaryOnSubdomainGenerator
input = baffle2
boundaries = 'top bottom'
[]
[delete]
type = BoundaryDeletionGenerator
boundary_names = 'top bottom'
input = split_top_bottom
[]
[]
[FVInterpolationMethods]
[upwind]
type = FVAdvectedUpwind
[]
[]
[Problem]
linear_sys_names = 'u_system v_system pressure_system energy_system'
previous_nl_solution_required = true
[]
[UserObjects]
[pressure_jump]
type = BernoulliFormLossPressureJump
boundary = 'baffle baffle2'
porosity = porosity
density = ${rho}
form_loss = ${bf}
reference_velocity_side = 'lower_porosity higher_porosity'
[]
[rc]
type = PorousRhieChowMassFlux
u = superficial_u
v = superficial_v
pressure = pressure
rho = ${rho}
porosity = porosity
p_diffusion_kernel = p_diffusion
pressure_jump_models = pressure_jump
pressure_jump_relaxation = 0.1
[]
[]
[Variables]
[superficial_u]
type = MooseLinearVariableFVReal
solver_sys = u_system
initial_condition = ${u_in}
gradient_method = velocity_jump_aware
[]
[superficial_v]
type = MooseLinearVariableFVReal
solver_sys = v_system
initial_condition = 0.0
gradient_method = velocity_jump_aware
[]
[pressure]
type = MooseLinearVariableFVReal
solver_sys = pressure_system
initial_condition = 0.0
gradient_method = jump_aware
[]
[h_fluid]
type = MooseLinearVariableFVReal
solver_sys = energy_system
initial_condition = '${fparse cp_fluid * T_initial}'
[]
[]
[LinearFVKernels]
[u_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_u
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'x'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[v_advection]
type = LinearPWCNSFVMomentumFlux
variable = superficial_v
advected_interp_method_name = ${advected_interp_method}
mu = ${mu}
u = superficial_u
v = superficial_v
momentum_component = 'y'
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[u_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_u
momentum_component = 'x'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[v_pressure]
type = LinearPWCNSFVMomentumPressure
variable = superficial_v
momentum_component = 'y'
porosity = porosity
pressure = pressure
gradient_method = reconstructed
[]
[u_friction]
type = LinearFVMomentumFriction
variable = superficial_u
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'x'
block = 2
[]
[v_friction]
type = LinearFVMomentumFriction
variable = superficial_v
Forchheimer_name = forch
porosity = porosity
rho = ${rho}
u = superficial_u
v = superficial_v
momentum_component = 'y'
block = 2
[]
[p_diffusion]
type = LinearFVPressureCorrectionDiffusionJump
variable = pressure
rhie_chow_user_object = rc
use_nonorthogonal_correction = false
[]
[HbyA_divergence]
type = LinearFVDivergence
variable = pressure
face_flux = HbyA
force_boundary_execution = true
[]
[fluid_advection]
type = LinearFVEnergyAdvection
variable = h_fluid
advected_quantity = enthalpy
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = rc
[]
[fluid_diffusion]
type = LinearFVDiffusion
variable = h_fluid
diffusion_coeff = kappa_fluid
use_nonorthogonal_correction = false
[]
[fluid_source]
type = LinearFVSource
variable = h_fluid
source_density = q_fluid_scaled
block = 2
[]
[]
[LinearFVBCs]
[left_u]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_u
functor = ${u_in}
[]
[outlet_u]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_u
use_two_term_expansion = false
[]
[left_v]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = superficial_v
functor = 0.0
[]
[outlet_v]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = superficial_v
use_two_term_expansion = false
[]
[symmetry-u]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_2 bottom_to_2 top_to_1 top_to_3 bottom_to_1 bottom_to_3'
variable = superficial_u
u = superficial_u
v = superficial_v
momentum_component = x
[]
[symmetry-v]
type = LinearFVVelocitySymmetryBC
boundary = 'top_to_2 bottom_to_2 top_to_1 top_to_3 bottom_to_1 bottom_to_3'
variable = superficial_v
u = superficial_u
v = superficial_v
momentum_component = y
[]
[outlet_p]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = right
variable = pressure
functor = 0.0
[]
[pressure-extrapolation]
type = LinearFVPressureFluxBC
boundary = 'bottom_to_1 bottom_to_2 bottom_to_3 top_to_1 top_to_2 top_to_3'
variable = pressure
HbyA_flux = HbyA
Ainv = Ainv
rho = ${rho}
u = superficial_u
v = superficial_v
[]
[left_T_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = T_fluid
functor = ${T_inlet}
[]
[left_h_fluid]
type = LinearFVAdvectionDiffusionFunctorDirichletBC
boundary = left
variable = h_fluid
functor = h_from_p_T
[]
[walls_h_fluid]
type = LinearFVAdvectionDiffusionFunctorNeumannBC
boundary = 'top_to_1 top_to_2 top_to_3 bottom_to_1 bottom_to_2 bottom_to_3'
variable = h_fluid
functor = 0.0
diffusion_coeff = kappa_fluid
[]
[outlet_h_fluid]
type = LinearFVAdvectionDiffusionOutflowBC
boundary = right
variable = h_fluid
use_two_term_expansion = false
[]
[]
[FunctorMaterials]
[forch]
type = GenericVectorFunctorMaterial
prop_names = forch
prop_values = '${forchheimer} ${forchheimer} ${forchheimer}'
[]
[porosity]
type = PiecewiseByBlockFunctorMaterial
prop_name = porosity
subdomain_to_prop_value = '1 1.0 2 0.5 3 1.0'
[]
[fluid_constants]
type = GenericFunctorMaterial
prop_names = 'cp_fluid kappa_fluid h_vol q_fluid_scaled'
prop_values = '${cp_fluid} ${fparse k_fluid/cp_fluid} ${h_vol} ${q}'
[]
[fluid_enthalpy_material]
type = LinearFVEnthalpyFunctorMaterial
pressure = pressure
T_fluid = T_fluid
h = h_fluid
h_from_p_T_functor = h_from_p_T_functor
T_from_p_h_functor = T_from_p_h_functor
[]
[h_from_p_T_functor]
type = ParsedFunctorMaterial
property_name = h_from_p_T_functor
functor_names = 'T_fluid'
expression = '${cp_fluid} * T_fluid'
[]
[T_from_p_h_functor]
type = ParsedFunctorMaterial
property_name = T_from_p_h_functor
functor_names = 'h_fluid'
expression = 'h_fluid / ${cp_fluid}'
[]
[]
[Postprocessors]
[u_block_2]
type = ElementAverageValue
variable = superficial_u
block = 2
[]
[T_fluid_out]
type = SideAverageValue
variable = T_fluid
boundary = right
[]
[T_fluid_block_2]
type = ElementAverageValue
variable = T_fluid
block = 2
[]
[h_fluid_out]
type = SideAverageValue
variable = h_fluid
boundary = right
[]
[]
[AuxVariables]
[porosity_aux]
type = MooseLinearVariableFVReal
[]
[T_fluid]
type = MooseLinearVariableFVReal
initial_condition = ${T_initial}
[]
[]
[AuxKernels]
[por]
type = FunctorAux
variable = porosity_aux
functor = porosity
execute_on = 'NONLINEAR'
[]
[fluid_temperature]
type = FunctorAux
variable = T_fluid
functor = T_from_p_h
execute_on = 'NONLINEAR'
[]
[]
[VectorPostprocessors]
# Sample each x-cell once at its center.
[centerline]
type = LineValueSampler
variable = 'superficial_u T_fluid'
start_point = '0.0119047619047619 0.25 0'
end_point = '1.4880952380952381 0.25 0'
num_points = 30
sort_by = x
[]
[]
[Executioner]
type = SIMPLE
momentum_l_abs_tol = 1e-14
pressure_l_abs_tol = 1e-14
energy_l_abs_tol = 1e-14
momentum_l_tol = 0
pressure_l_tol = 0
energy_l_tol = 0
rhie_chow_user_object = rc
momentum_systems = 'u_system v_system'
pressure_system = pressure_system
energy_system = energy_system
momentum_equation_relaxation = 0.2
pressure_variable_relaxation = 0.2
energy_equation_relaxation = 0.7
num_iterations = 1000
# These outer tolerances stop once the velocity and zero-pressure fields have stabilized to
# substantially below the accuracy exercised by the temperature and velocity profile checks.
pressure_absolute_tolerance = 1e-6
momentum_absolute_tolerance = 1e-2
energy_absolute_tolerance = 1e-8
momentum_petsc_options_iname = '-pc_type -pc_hypre_type'
momentum_petsc_options_value = 'hypre boomeramg'
pressure_petsc_options_iname = '-pc_type -pc_hypre_type'
pressure_petsc_options_value = 'hypre boomeramg'
energy_petsc_options_iname = '-pc_type -pc_hypre_type'
energy_petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
execute_on = FINAL
[]