- areaCross-sectional flow area function of the well [m^2]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Cross-sectional flow area function of the well [m^2]
- fluid_propertiesFluid properties object
C++ Type:UserObjectName
Controllable:No
Description:Fluid properties object
- fracture_directionDirection to fracture
C++ Type:libMesh::VectorValue<double>
Unit:(no unit assumed)
Controllable:No
Description:Direction to fracture
- initial_pressureInitial pressure function [Pa]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial pressure function [Pa]
- initial_temperatureInitial temperature function [K]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Initial temperature function [K]
- junction_coupling_areasFlow surface area for each junction point [m^2]
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Flow surface area for each junction point [m^2]
- junction_pointsJunction points [m]
C++ Type:std::vector<libMesh::Point>
Controllable:No
Description:Junction points [m]
- junction_volumeVolume of each junction [m^3]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Volume of each junction [m^3]
- outlet_pressureOutlet pressure function [Pa]
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Outlet pressure function [Pa]
- section_n_elemsNumber of elements in each well section
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Number of elements in each well section
- surface_pointSurface point [m]
C++ Type:libMesh::Point
Controllable:No
Description:Surface point [m]
ProductionWell
This ActionComponent creates a production well, composed of the following components:
Outlet1Phase, located at the "surface point"
SolidWall1Phase, optionally located at the "bottom" of the well
The user provides the surface point via "surface_point", the junction points with "junction_points", and then an optional end point with "end_point" (if omitted, there is no channel after the last junction).
If "multi_app" is provided, it is passed to VolumeJunctionCoupledFlux1Phase (see its documentation for more information).
The flow channels use Closures1PhaseSimple with the friction factor provided by "friction_factor".
The outlet pressure is specified by "outlet_pressure".
Input Parameters
- end_pointEnd point [m]. If not provided, the well ends at the final volume junction
C++ Type:libMesh::Point
Controllable:No
Description:End point [m]. If not provided, the well ends at the final volume junction
- friction_factor0.0Darcy friction factor function
Default:0.0
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Darcy friction factor function
- multi_appIf provided, transfers occur with this MultiApp. The following would be transferred: mass flow rate, energy flow rate, temperature, and pressure at each junction.
C++ Type:MultiAppName
Controllable:No
Description:If provided, transfers occur with this MultiApp. The following would be transferred: mass flow rate, energy flow rate, temperature, and pressure at each junction.
- verboseFalseWhether the component setup should be verbose
Default:False
C++ Type:bool
Controllable:No
Description:Whether the component setup should be verbose
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.