- porosityThe porosity. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The porosity. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
- pressureThe pressure variable.
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The pressure variable.
- uThe x-component of velocity
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The x-component of velocity
PINSFVRhieChowInterpolator
Performs interpolations and reconstructions of porosity and computes the Rhie-Chow face velocities.
Overview
This object inherits from INSFVRhieChowInterpolator and does all the same operations, but in addition optionally performs successive interpolation-reconstruction operations on the porosity, which in effect is a smoothing operation, helping to create monotone behavior near porosity discontinuities. These interpolation-reconstruction operations are triggered by setting the smoothing_layers parameter. One reconstruction corresponds to one interpolation to the face and reconstruction back to the center, effectively increasing the "stencil" of the porosity by one layer per smoothing_layer. If performing smoothing_layers on the porosity, the input porosity functor cannot be a MOOSE variable or a function of a MOOSE variable, as smoothing_layers would then require algebraic ghosting of the solution vectors.
Input Parameters
- a_uFor simulations in which the advecting velocities are aux variables, this parameter must be supplied. It represents the on-diagonal coefficients for the 'x' component velocity, solved via the Navier-Stokes equations. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:For simulations in which the advecting velocities are aux variables, this parameter must be supplied. It represents the on-diagonal coefficients for the 'x' component velocity, solved via the Navier-Stokes equations. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
- a_vFor simulations in which the advecting velocities are aux variables, this parameter must be supplied when the mesh dimension is greater than 1. It represents the on-diagonal coefficients for the 'y' component velocity, solved via the Navier-Stokes equations. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:For simulations in which the advecting velocities are aux variables, this parameter must be supplied when the mesh dimension is greater than 1. It represents the on-diagonal coefficients for the 'y' component velocity, solved via the Navier-Stokes equations. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
- a_wFor simulations in which the advecting velocities are aux variables, this parameter must be supplied when the mesh dimension is greater than 2. It represents the on-diagonal coefficients for the 'z' component velocity, solved via the Navier-Stokes equations. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:For simulations in which the advecting velocities are aux variables, this parameter must be supplied when the mesh dimension is greater than 2. It represents the on-diagonal coefficients for the 'z' component velocity, solved via the Navier-Stokes equations. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- correct_volumetric_forceFalseFlag to activate volume force corrections.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Flag to activate volume force corrections.
- disp_xThe x-component of displacement
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The x-component of displacement
- disp_yThe y-component of displacement
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The y-component of displacement
- disp_zThe z-component of displacement
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The z-component of displacement
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- smoothing_layers0The number of interpolation-reconstruction operations to perform on the porosity
Default:0
C++ Type:unsigned short
Unit:(no unit assumed)
Controllable:No
Description:The number of interpolation-reconstruction operations to perform on the porosity
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
- vThe y-component of velocity
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The y-component of velocity
- velocity_interp_methodrcThe interpolation to use for the velocity. Options are 'average' and 'rc' which stands for Rhie-Chow. The default is Rhie-Chow.
Default:rc
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:average, rc
Controllable:No
Description:The interpolation to use for the velocity. Options are 'average' and 'rc' which stands for Rhie-Chow. The default is Rhie-Chow.
- volume_force_correction_methodforce-consistentThe method used for correcting the Rhie-Chow coefficients for a volume force.
Default:force-consistent
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:force-consistent, pressure-consistent
Controllable:No
Description:The method used for correcting the Rhie-Chow coefficients for a volume force.
- volumetric_force_functorsThe names of the functors with the volumetric force sources.
C++ Type:std::vector<MooseFunctorName>
Unit:(no unit assumed)
Controllable:No
Description:The names of the functors with the volumetric force sources.
- wThe z-component of velocity
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The z-component of velocity
Optional Parameters
- absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution
C++ Type:std::vector<TagName>
Unit:(no unit assumed)
Controllable:No
Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Unit:(no unit assumed)
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Unit:(no unit assumed)
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Unit:(no unit assumed)
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Unit:(no unit assumed)
Options:nontime, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Tagging Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- mass_momentum_systemnl0The nonlinear system in which the monolithic momentum and continuity equations are located.
Default:nl0
C++ Type:NonlinearSystemName
Unit:(no unit assumed)
Controllable:No
Description:The nonlinear system in which the monolithic momentum and continuity equations are located.
Nonlinear Solver Parameters
- pull_all_nonlocal_aFalseWhether to pull all nonlocal 'a' coefficient data to our process. Note that 'nonlocal' means elements that we have access to (this may not be all the elements in the mesh if the mesh is distributed) but that we do not own.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether to pull all nonlocal 'a' coefficient data to our process. Note that 'nonlocal' means elements that we have access to (this may not be all the elements in the mesh if the mesh is distributed) but that we do not own.
Parallel Execution Tuning Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-1d.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/materials/2d-rc.i)
- (modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_PINSFV.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/block-restriction/with-empty-block.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-rz-by-parts.i)
- (modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-1d-functor-material.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-friction.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-disp-system.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/2d-rc.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-transient.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/2d-rc-epsjump.i)
- (modules/navier_stokes/test/tests/finite_volume/cns/mms/1d-with-bcs/pwcnsfv.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc-no-diffusion.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/1d-rc-continuous.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/pressure-interpolation-corrected.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-boussinesq.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc-no-diffusion-strong-bc.i)
- (modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient-gas.i)
- (modules/navier_stokes/test/tests/finite_volume/materials/ergun/ergun.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/2d-rc-continuous.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/1d-rc-epsjump.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-2d.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-effective.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-1d-parsed-function.i)
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-1d.i)
rho = 1.1
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '3 3'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = BernoulliPressureVariable
u = u
porosity = porosity
rho = ${rho}
[]
[]
[AuxVariables]
[porosity]
type = PiecewiseConstantVariable
[]
[has_porosity_jump_face]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[has_porosity_jump_face]
type = HasPorosityJumpFace
porosity = porosity
execute_on = 'initial timestep_end'
variable = has_porosity_jump_face
[]
[]
[ICs]
[porosity_1]
type = ConstantIC
variable = porosity
block = 1
value = 1
[]
[porosity_2]
type = ConstantIC
variable = porosity
block = 2
value = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/materials/2d-rc.i)
mu = 0.01
rho = 2000
u_inlet = 1
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 10
ny = 6
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[speed_output]
type = MooseVariableFVReal
[]
[vel_x_output]
type = MooseVariableFVReal
[]
[vel_y_output]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[speed]
type = FunctorAux
variable = 'speed_output'
functor = 'speed'
[]
[vel_x]
type = ADFunctorVectorElementalAux
variable = 'vel_x_output'
functor = 'velocity'
component = 0
[]
[vel_y]
type = ADFunctorVectorElementalAux
variable = 'vel_y_output'
functor = 'velocity'
component = 1
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[FunctorMaterials]
# Testing this object
[var_mat]
type = PINSFVSpeedFunctorMaterial
superficial_vel_x = 'superficial_vel_x'
superficial_vel_y = 'superficial_vel_y'
porosity = porosity
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-11
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_PINSFV.i)
mu=1
rho=1
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
inactive = 'mesh internal_boundary_bot internal_boundary_top'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1'
dy = '1 1 1'
ix = '5'
iy = '5 5 5'
subdomain_id = '1
2
3'
[]
[internal_boundary_bot]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
new_boundary = 'internal_bot'
primary_block = 1
paired_block = 2
[]
[internal_boundary_top]
type = SideSetsBetweenSubdomainsGenerator
input = internal_boundary_bot
new_boundary = 'internal_top'
primary_block = 2
paired_block = 3
[]
[diverging_mesh]
type = FileMeshGenerator
file = 'expansion_quad.e'
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 0
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[temperature]
type = INSFVEnergyVariable
[]
[]
[AuxVariables]
[advected_density]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = ${rho}
[]
[porosity]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
force_boundary_execution = true
porosity = porosity
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
force_boundary_execution = true
porosity = porosity
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[temp_advection]
type = PINSFVEnergyAdvection
variable = temperature
advected_interp_method = 'upwind'
[]
[temp_source]
type = FVBodyForce
variable = temperature
function = 10
block = 1
[]
[]
[FVBCs]
inactive = 'noslip-u noslip-v'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = u
function = 0
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = v
function = 1
[]
[noslip-u]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = u
function = 0
[]
[noslip-v]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = v
function = 0
[]
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'right'
variable = u
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'right'
variable = v
momentum_component = 'y'
[]
[axis-u]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[axis-v]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[axis-p]
type = INSFVSymmetryPressureBC
boundary = 'left'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'top'
variable = pressure
function = 0
[]
[inlet_temp]
type = FVNeumannBC
boundary = 'bottom'
variable = temperature
value = 300
[]
[]
[FunctorMaterials]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
temperature = 'temperature'
rho = ${rho}
[]
[advected_material_property]
type = ADGenericFunctorMaterial
prop_names = 'advected_rho cp'
prop_values ='${rho} 1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Postprocessors]
[inlet_mass_variable]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = advected_density
[]
[inlet_mass_constant]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[inlet_mass_matprop]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = 'advected_rho'
[]
[mid1_mass]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[mid2_mass]
type = VolumetricFlowRate
boundary = internal_top
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[outlet_mass]
type = VolumetricFlowRate
boundary = top
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[inlet_momentum_x]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = u
[]
[inlet_momentum_y]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = v
[]
[mid1_advected_energy]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[mid2_advected_energy]
type = VolumetricFlowRate
boundary = internal_top
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[outlet_advected_energy]
type = VolumetricFlowRate
boundary = top
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/block-restriction/with-empty-block.i)
mu = 1.2
rho_fluid = 0.2
k_fluid = 1.1
cp_fluid = 2.3
T_cold = 310
alpha = 1e-3
Q = 200
[Problem]
kernel_coverage_check = false
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
velocity_interp_method = 'rc'
advected_interp_method = 'average'
[]
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '0.3683 0.0127'
dy = '0.0127 0.2292 2.5146 0.2292 0.0127'
ix = '2 1'
iy = '1 2 3 2 1'
subdomain_id = '0 0
1 0
2 0
1 0
0 0
'
[]
[rename_block_name]
type = RenameBlockGenerator
input = cmg
old_block = '0 1 2'
new_block = 'wall_block spacer_block porous_block'
[]
[solid_fluid_interface_1]
type = SideSetsBetweenSubdomainsGenerator
input = rename_block_name
primary_block = porous_block
paired_block = wall_block
new_boundary = 'solid_fluid_interface'
[]
[solid_fluid_interface_2]
type = SideSetsBetweenSubdomainsGenerator
input = solid_fluid_interface_1
primary_block = spacer_block
paired_block = wall_block
new_boundary = 'solid_fluid_interface'
[]
[wall_left_boundary_1]
type = SideSetsFromBoundingBoxGenerator
input = solid_fluid_interface_2
bottom_left = '0 0 0'
top_right = '0.1 0.0127 0'
included_boundaries = left
boundary_new = wall_left
[]
[wall_left_boundary_2]
type = SideSetsFromBoundingBoxGenerator
input = wall_left_boundary_1
bottom_left = '0 2.9857 0'
top_right = '0.1 2.9984 0'
included_boundaries = left
boundary_new = wall_left
[]
[fluid_left_boundary]
type = SideSetsFromBoundingBoxGenerator
input = wall_left_boundary_2
bottom_left = '0 0.0127 0'
top_right = '0.1 2.9857 0'
included_boundaries = left
boundary_new = fluid_left
[]
coord_type = RZ
rz_coord_axis = Y
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
block = 'spacer_block porous_block'
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
block = 'spacer_block porous_block'
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
block = 'spacer_block porous_block'
[]
[pressure]
type = INSFVPressureVariable
block = 'spacer_block porous_block'
[]
[T_fluid]
type = INSFVEnergyVariable
block = 'spacer_block porous_block'
[]
[lambda]
family = SCALAR
order = FIRST
block = 'spacer_block porous_block'
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
block = 'spacer_block porous_block'
[]
[]
[FVKernels]
# No mass time derivative because imcompressible (derivative = 0)
[mass]
type = PINSFVMassAdvection
variable = pressure
rho = ${rho_fluid}
block = 'spacer_block porous_block'
[]
[mean_zero_pressure]
type = FVIntegralValueConstraint
variable = pressure
lambda = lambda
block = 'spacer_block porous_block'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
rho = ${rho_fluid}
momentum_component = 'x'
block = 'spacer_block porous_block'
porosity = porosity
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
momentum_component = 'x'
block = 'spacer_block porous_block'
porosity = porosity
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
block = 'spacer_block porous_block'
porosity = porosity
[]
[u_buoyancy]
type = PINSFVMomentumBoussinesq
variable = superficial_vel_x
T_fluid = T_fluid
gravity = '0 -1 0'
rho = ${rho_fluid}
ref_temperature = ${T_cold}
momentum_component = 'x'
block = 'spacer_block porous_block'
porosity = porosity
[]
[u_gravity]
type = PINSFVMomentumGravity
variable = superficial_vel_x
gravity = '0 -1 0'
rho = ${rho_fluid}
momentum_component = 'x'
block = 'spacer_block porous_block'
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
rho = ${rho_fluid}
momentum_component = 'y'
block = 'spacer_block porous_block'
porosity = porosity
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
block = 'spacer_block porous_block'
porosity = porosity
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
block = 'spacer_block porous_block'
porosity = porosity
[]
[v_buoyancy]
type = PINSFVMomentumBoussinesq
variable = superficial_vel_y
T_fluid = T_fluid
gravity = '0 -1 0'
rho = ${rho_fluid}
ref_temperature = ${T_cold}
momentum_component = 'y'
block = 'spacer_block porous_block'
porosity = porosity
[]
[v_gravity]
type = PINSFVMomentumGravity
variable = superficial_vel_y
gravity = '0 -1 0'
rho = ${rho_fluid}
momentum_component = 'y'
block = 'spacer_block porous_block'
porosity = porosity
[]
[temp_conduction]
type = PINSFVEnergyDiffusion
k = 'k_fluid'
variable = T_fluid
block = 'spacer_block porous_block'
porosity = porosity
[]
[temp_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
block = 'spacer_block porous_block'
[]
[heat_source]
type = FVBodyForce
variable = T_fluid
function = ${Q}
block = 'porous_block'
[]
[]
[FVBCs]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = superficial_vel_x
boundary = 'solid_fluid_interface'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = superficial_vel_y
boundary = 'solid_fluid_interface'
function = 0
[]
[reflective_x]
type = INSFVSymmetryVelocityBC
variable = superficial_vel_x
boundary = fluid_left
momentum_component = 'x'
mu = ${mu}
u = superficial_vel_x
v = superficial_vel_y
[]
[reflective_y]
type = INSFVSymmetryVelocityBC
variable = superficial_vel_y
boundary = fluid_left
momentum_component = 'y'
mu = ${mu}
u = superficial_vel_x
v = superficial_vel_y
[]
[reflective_p]
type = INSFVSymmetryPressureBC
boundary = fluid_left
variable = pressure
[]
[T_reflective]
type = FVNeumannBC
variable = T_fluid
boundary = fluid_left
value = 0
[]
[T_cold_boundary]
type = FVDirichletBC
variable = T_fluid
boundary = solid_fluid_interface
value = ${T_cold}
[]
[]
[ICs]
[porosity_spacer]
type = ConstantIC
variable = porosity
block = spacer_block
value = 1.0
[]
[porosity_fuel]
type = ConstantIC
variable = porosity
block = porous_block
value = 0.1
[]
[temp_ic_fluid]
type = ConstantIC
variable = T_fluid
value = ${T_cold}
block = 'spacer_block porous_block'
[]
[superficial_vel_x]
type = ConstantIC
variable = superficial_vel_x
value = 1E-5
block = 'spacer_block porous_block'
[]
[superficial_vel_y]
type = ConstantIC
variable = superficial_vel_y
value = 1E-5
block = 'spacer_block porous_block'
[]
[]
[FunctorMaterials]
[functor_constants_fluid]
type = ADGenericFunctorMaterial
prop_names = 'alpha_b cp k_fluid'
prop_values = '${alpha} ${cp_fluid} ${k_fluid}'
block = 'spacer_block porous_block'
[]
[density_fluid]
type = INSFVEnthalpyFunctorMaterial
temperature = 'T_fluid'
rho = ${rho_fluid}
block = 'spacer_block porous_block'
[]
[functor_constants_steel]
# We need this to avoid errors for materials not existing on every block
type = ADGenericFunctorMaterial
prop_names = 'dummy'
prop_values = 0.0
block = wall_block
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = none
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
[]
[Outputs]
exodus = true
[]
[Debug]
show_var_residual_norms = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-rz-by-parts.i)
mu = 1.1
rho = 1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 5
ymin = 0
ymax = 1
nx = 40
ny = 10
[]
coord_type = 'RZ'
rz_coord_axis = 'X'
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'v_pressure_volumetric'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressureFlux
variable = u
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[u_friction]
type = PINSFVMomentumFriction
variable = u
momentum_component = 'x'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure_volumetric]
type = PINSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[v_pressure_by_parts_flux]
type = PINSFVMomentumPressureFlux
variable = v
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[v_pressure_by_parts_volume_term]
type = PNSFVMomentumPressureFluxRZ
variable = v
pressure = pressure
porosity = porosity
momentum_component = 'y'
[]
[v_friction]
type = PINSFVMomentumFriction
variable = v
momentum_component = 'y'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[]
[FVBCs]
inactive = 'free-slip-u free-slip-v'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = u
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = v
function = 0
[]
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top'
variable = u
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top'
variable = v
momentum_component = 'y'
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[]
[FunctorMaterials]
[darcy]
type = ADGenericVectorFunctorMaterial
prop_names = 'Darcy_coefficient Forchheimer_coefficient'
prop_values = '0.1 0.1 0.1 0.1 0.1 0.1'
[]
[speed]
type = PINSFVSpeedFunctorMaterial
superficial_vel_x = u
superficial_vel_y = v
porosity = porosity
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-14
[]
# Some basic Postprocessors to visually examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient.i)
# Fluid properties
mu = 'mu'
rho = 'rho'
cp = 'cp'
k = 'k'
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
# Numerical scheme
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 20
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${p_outlet}
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${T_inlet}
[]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[velocity_norm]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[mass_time]
type = PWCNSFVMassTimeDerivative
variable = pressure
porosity = 'porosity'
drho_dt = 'drho_dt'
[]
[mass]
type = PWCNSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = superficial_vel_x
rho = ${rho}
drho_dt = 'drho_dt'
momentum_component = 'x'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = superficial_vel_y
rho = ${rho}
drho_dt = 'drho_dt'
momentum_component = 'y'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_fluid
cp = ${cp}
rho = ${rho}
drho_dt = 'drho_dt'
is_solid = false
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
variable = T_fluid
k = ${k}
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = porosity
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVDirichletBC
variable = T_fluid
value = ${T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = ${p_outlet}
[]
[]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[FunctorMaterials]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = fp
pressure = 'pressure'
T_fluid = 'T_fluid'
speed = 'velocity_norm'
# To initialize with a high viscosity
mu_rampdown = 'mu_rampdown'
# For porous flow
characteristic_length = 1
porosity = 'porosity'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '${h_fs}'
[]
[]
[Functions]
[mu_rampdown]
type = PiecewiseLinear
x = '1 2 3 4'
y = '1e3 1e2 1e1 1'
[]
[]
[AuxKernels]
[speed]
type = ParsedAux
variable = 'velocity_norm'
coupled_variables = 'superficial_vel_x superficial_vel_y porosity'
expression = 'sqrt(superficial_vel_x*superficial_vel_x + superficial_vel_y*superficial_vel_y) / '
'porosity'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
end_time = 3.0
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-1d-functor-material.i)
rho = 1.1
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '3 3'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = BernoulliPressureVariable
u = u
porosity = porosity
rho = ${rho}
[]
[]
[AuxVariables]
[has_porosity_jump_face]
type = MooseVariableFVReal
[]
[porosity_out]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[has_porosity_jump_face]
type = HasPorosityJumpFace
porosity = porosity
execute_on = 'initial timestep_end'
variable = has_porosity_jump_face
[]
[porosity_out]
type = FunctorAux
variable = porosity_out
functor = porosity
execute_on = 'initial timestep_end'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 1
[]
[]
[FunctorMaterials]
[porosity]
type = ADPiecewiseByBlockFunctorMaterial
prop_name = 'porosity'
subdomain_to_prop_value = '1 1 2 0.5'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-friction.i)
mu = 1.1
rho = 1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '2.5 2.5'
dy = '1.0'
ix = '20 20'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'lambda'
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'mean-pressure'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[u_friction]
type = PINSFVMomentumFriction
variable = superficial_vel_x
momentum_component = 'x'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
mu = ${mu}
rho = ${rho}
speed = speed
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[v_friction]
type = PINSFVMomentumFriction
variable = superficial_vel_y
momentum_component = 'y'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[mean-pressure]
type = FVIntegralValueConstraint
variable = pressure
lambda = lambda
phi0 = 0.01
[]
[]
[FVBCs]
inactive = 'free-slip-u free-slip-v'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top'
variable = superficial_vel_x
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top'
variable = superficial_vel_y
momentum_component = 'y'
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[]
[FunctorMaterials]
[darcy]
type = ADGenericVectorFunctorMaterial
prop_names = 'Darcy_coefficient Forchheimer_coefficient'
prop_values = '0.1 0.1 0.1 0.1 0.1 0.1'
[]
[speec]
type = PINSFVSpeedFunctorMaterial
superficial_vel_x = superficial_vel_x
superficial_vel_y = superficial_vel_y
porosity = porosity
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-14
[]
# Some basic Postprocessors to visually examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = superficial_vel_x
boundary = 'right'
[]
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-disp-system.i)
mu = 1
rho = 1
k = 1e-3
cp = 1
u_inlet = 1
T_inlet = 200
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '5 5'
dy = '1.0'
ix = '50 50'
iy = '20'
subdomain_id = '1 2'
[]
displacements = 'disp_x disp_y'
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
use_displaced_mesh = true
[]
[AuxVariables]
[disp_x][]
[disp_y][]
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
disp_x = disp_x
disp_y = disp_y
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[]
[AuxVariables]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
k = ${k}
variable = T_fluid
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = '${fparse u_inlet * rho * cp * T_inlet}'
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-12
num_steps = 1
dtmin = 1
[]
[FunctorMaterials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '1'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
hide = 'disp_x disp_y'
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/2d-rc.i)
mu = 1.1
rho = 1.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = -1
ymax = 1
nx = 8
ny = 8
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.8
[]
[]
[GlobalParams]
porosity = porosity
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
porosity = porosity
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[v_forcing]
type = INSFVBodyForce
variable = v
functor = forcing_v
momentum_component = 'y'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
functor = 'exact_u'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
functor = 'exact_v'
[]
[walls-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = u
function = 'exact_u'
[]
[walls-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = v
function = 'exact_v'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Functions]
[exact_u]
type = ParsedFunction
expression = 'sin((1/2)*y*pi)*cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = '0.5*pi^2*mu*sin((1/2)*y*pi)*cos((1/2)*x*pi) - 0.625*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi) + 0.625*pi*rho*sin((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)^2 - 1.25*pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi) - 0.2*pi*sin((1/4)*x*pi)*sin((3/2)*y*pi)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_v]
type = ParsedFunction
expression = 'sin((1/4)*x*pi)*cos((1/2)*y*pi)'
[]
[forcing_v]
type = ParsedFunction
expression = '0.3125*pi^2*mu*sin((1/4)*x*pi)*cos((1/2)*y*pi) - 1.25*pi*rho*sin((1/4)*x*pi)^2*sin((1/2)*y*pi)*cos((1/2)*y*pi) - 0.625*pi*rho*sin((1/4)*x*pi)*sin((1/2)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*y*pi) + 0.3125*pi*rho*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi) + 1.2*pi*cos((1/4)*x*pi)*cos((3/2)*y*pi)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin((3/2)*y*pi)*cos((1/4)*x*pi)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi) - 1/2*pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
csv = true
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2v]
type = ElementL2FunctorError
approximate = v
exact = exact_v
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
type = ElementL2FunctorError
approximate = pressure
exact = exact_p
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-transient.i)
# Fluid properties
mu = 1
rho = 1
cp = 1
k = 1e-3
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
# Numerical scheme
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 100
ny = 20
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${p_outlet}
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = superficial_vel_x
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = superficial_vel_y
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_fluid
cp = ${cp}
rho = ${rho}
is_solid = false
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
variable = T_fluid
k = ${k}
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = porosity
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = '${fparse u_inlet * rho * cp * T_inlet}'
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = ${p_outlet}
[]
[]
[FunctorMaterials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '${h_fs}'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-12
end_time = 1.5
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/2d-rc-epsjump.i)
mu=1.1
rho=1.1
advected_interp_method='upwind'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '0.5'
ix = '30 30'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
porosity = porosity
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
porosity = porosity
pressure = pressure
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
[]
[]
[ICs]
inactive = 'porosity_continuous'
[porosity_1]
type = ConstantIC
variable = porosity
block = 1
value = 1
[]
[porosity_2]
type = ConstantIC
variable = porosity
block = 2
value = 0.5
[]
[porosity_continuous]
type = FunctionIC
variable = porosity
block = '1 2'
function = smooth_jump
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
expression = '1 - 0.5 * 1 / (1 + exp(-30*(x-1)))'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
momentum_component = 'x'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
pressure = pressure
momentum_component = 'y'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[walls-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = u
momentum_component = 'x'
[]
[walls-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = v
momentum_component = 'y'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.4
[]
[]
[FunctorMaterials]
inactive = 'smooth'
[jump]
type = ADPiecewiseByBlockFunctorMaterial
prop_name = 'porosity'
subdomain_to_prop_value = '1 1
2 0.5'
[]
[smooth]
type = ADGenericFunctionFunctorMaterial
prop_names = 'porosity'
prop_values = 'smooth_jump'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-10
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/cns/mms/1d-with-bcs/pwcnsfv.i)
rho='rho'
advected_interp_method='upwind'
velocity_interp_method='rc'
gamma=1.4
R=8.3145
molar_mass=29.0e-3
R_specific=${fparse R/molar_mass}
cp=${fparse gamma*R_specific/(gamma-1)}
[GlobalParams]
two_term_boundary_expansion = true
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = sup_vel_x
pressure = pressure
porosity = porosity
[]
[]
[Mesh]
[cartesian]
type = GeneratedMeshGenerator
dim = 1
xmin = .1
xmax = .6
nx = 2
[]
[]
[FluidProperties]
[fp]
type = IdealGasFluidProperties
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[pressure]
type = INSFVPressureVariable
[]
[sup_vel_x]
type = PINSFVSuperficialVelocityVariable
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[]
[ICs]
[pressure]
type = FunctionIC
variable = pressure
function = 'exact_p'
[]
[sup_vel_x]
type = FunctionIC
variable = sup_vel_x
function = 'exact_sup_vel_x'
[]
[T_fluid]
type = FunctionIC
variable = T_fluid
function = 'exact_T'
[]
[eps]
type = FunctionIC
variable = porosity
function = 'eps'
[]
[]
[FVKernels]
[mass_advection]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_fn]
type = FVBodyForce
variable = pressure
function = 'forcing_rho'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = sup_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressureFlux
variable = sup_vel_x
pressure = pressure
porosity = porosity
momentum_component = 'x'
force_boundary_execution = false
[]
[momentum_fn]
type = INSFVBodyForce
variable = sup_vel_x
functor = 'forcing_rho_ud'
momentum_component = 'x'
[]
[]
[FVBCs]
[mass]
variable = pressure
type = PINSFVFunctorBC
boundary = 'left right'
superficial_vel_x = sup_vel_x
pressure = pressure
eqn = 'mass'
porosity = porosity
[]
[momentum]
variable = sup_vel_x
type = PINSFVFunctorBC
boundary = 'left right'
superficial_vel_x = sup_vel_x
pressure = pressure
eqn = 'momentum'
momentum_component = 'x'
porosity = porosity
[]
# help gradient reconstruction *and* create Dirichlet values for use in PINSFVFunctorBC
[pressure_right]
type = FVFunctionDirichletBC
variable = pressure
function = exact_p
boundary = 'right'
[]
[sup_vel_x_left]
type = FVFunctionDirichletBC
variable = sup_vel_x
function = exact_sup_vel_x
boundary = 'left'
[]
[T_fluid_left]
type = FVFunctionDirichletBC
variable = T_fluid
function = exact_T
boundary = 'left'
[]
[]
[FunctorMaterials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T_fluid
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
temperature = T_fluid
rho = ${rho}
[]
[]
[Functions]
[forcing_rho]
type = ParsedFunction
expression = '-3.45300378856215*sin(1.1*x)'
[]
[forcing_rho_ud]
type = ParsedFunction
expression = '-0.9*(10.6975765229419*cos(1.2*x)/cos(x) - 0.697576522941849*cos(1.1*x)^2/cos(x)^2)*sin(x) + 0.9*(10.6975765229419*sin(x)*cos(1.2*x)/cos(x)^2 - 1.3951530458837*sin(x)*cos(1.1*x)^2/cos(x)^3 + 1.53466835047207*sin(1.1*x)*cos(1.1*x)/cos(x)^2 - 12.8370918275302*sin(1.2*x)/cos(x))*cos(x) + 3.13909435323832*sin(x)*cos(1.1*x)^2/cos(x)^2 - 6.9060075771243*sin(1.1*x)*cos(1.1*x)/cos(x)'
[]
[exact_T]
type = ParsedFunction
expression = '0.0106975765229418*cos(1.2*x)/cos(x) - 0.000697576522941848*cos(1.1*x)^2/cos(x)^2'
[]
[exact_p]
type = ParsedFunction
expression = '3.48788261470924*(3.06706896551724*cos(1.2*x)/cos(x) - 0.2*cos(1.1*x)^2/cos(x)^2)*cos(x)'
[]
[exact_sup_vel_x]
type = ParsedFunction
expression = '0.9*cos(1.1*x)/cos(x)'
[]
[eps]
type = ParsedFunction
expression = '0.9'
[]
[]
[Executioner]
solve_type = NEWTON
type = Transient
num_steps = 1
dtmin = 1
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_max_its = 50
line_search = bt
nl_rel_tol = 1e-12
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
[Debug]
show_var_residual_norms = true
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2pressure]
type = ElementL2FunctorError
approximate = pressure
exact = exact_p
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2sup_vel_x]
approximate = sup_vel_x
exact = exact_sup_vel_x
type = ElementL2FunctorError
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc-no-diffusion.i)
mu = 1e-15
rho = 1.1
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 2
xmax = 0.5
[]
[]
[GlobalParams]
two_term_boundary_expansion = true
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = .1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.8
[]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Functions]
[exact_u]
type = ParsedFunction
expression = 'cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = '-1.25*pi*rho*sin((1/2)*x*pi)*cos((1/2)*x*pi) + 0.8*cos(x)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin(x)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/2)*x*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressureFlux
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
functor = 'exact_u'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'bt'
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
approximate = pressure
exact = exact_p
type = ElementL2FunctorError
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/1d-rc-continuous.i)
mu = 1.5
rho = 1.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '15 15'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
porosity = porosity
pressure = pressure
[]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[ICs]
[porosity_continuous]
type = FunctionIC
variable = porosity
function = smooth_jump
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
expression = '1 - 0.5 * 1 / (1 + exp(-30*(x-1)))'
[]
# Generated by compute-functions-1d.py
[exact_u]
type = ParsedFunction
expression = 'cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = '-mu*(1 - 0.5/(exp(30 - 30*x) + 1))*(-1/4*pi^2*cos((1/2)*x*pi)/(1 - 0.5/(exp(30 - 30*x) + 1)) - 15.0*pi*exp(30 - 30*x)*sin((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2) - 450.0*exp(30 - 30*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2) + 900.0*exp(60 - 60*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^3) + 450.0*exp(60 - 60*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^3*(exp(30 - 30*x) + 1)^4)) + 15.0*mu*(-1/2*pi*sin((1/2)*x*pi)/(1 - 0.5/(exp(30 - 30*x) + 1)) + 15.0*exp(30 - 30*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2))*exp(30 - 30*x)/(exp(30 - 30*x) + 1)^2 - pi*rho*sin((1/2)*x*pi)*cos((1/2)*x*pi)/(1 - 0.5/(exp(30 - 30*x) + 1)) + 15.0*rho*exp(30 - 30*x)*cos((1/2)*x*pi)^2/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2) + (1 - 0.5/(exp(30 - 30*x) + 1))*cos(x)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin(x)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/2)*x*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
functor = 'exact_u'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
# ksp_gmres_restart bumped to 200 for linear convergence
nl_max_its = 100
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
approximate = pressure
exact = exact_p
type = ElementL2FunctorError
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc.i)
mu = 1.1
rho = 1.1
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 5
ymin = 0
ymax = 1
nx = 20
ny = 10
[]
[]
[GlobalParams]
advected_interp_method = 'average'
velocity_interp_method = 'rc'
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'lambda'
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'mean-pressure'
[mass]
type = PINSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[mean-pressure]
type = FVIntegralValueConstraint
variable = pressure
lambda = lambda
phi0 = 0.01
[]
[]
[FVBCs]
# Select desired boundary conditions
active = 'inlet-u inlet-v outlet-p free-slip-u free-slip-v'
# Possible inlet boundary conditions
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-p]
type = INSFVOutletPressureBC
boundary = 'left'
variable = pressure
function = 1
[]
# Possible wall boundary conditions
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = superficial_vel_x
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = superficial_vel_y
momentum_component = 'y'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = superficial_vel_y
function = 0
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
# Possible outlet boundary conditions
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[outlet-p-novalue]
type = INSFVMassAdvectionOutflowBC
boundary = 'right'
variable = pressure
u = superficial_vel_x
v = superficial_vel_y
rho = ${rho}
[]
[outlet-u]
type = PINSFVMomentumAdvectionOutflowBC
boundary = 'right'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
porosity = porosity
momentum_component = 'x'
rho = ${rho}
[]
[outlet-v]
type = PINSFVMomentumAdvectionOutflowBC
boundary = 'right'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
porosity = porosity
momentum_component = 'y'
rho = ${rho}
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 300 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-14
[]
# Some basic Postprocessors to visually examine the solution
[Postprocessors]
[inlet-p]
type = SideIntegralVariablePostprocessor
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = superficial_vel_x
boundary = 'right'
[]
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/pressure-interpolation-corrected.i)
mu = 1.1
rho = 1.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
darcy = 1.1
forch = 1.1
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = -1
ymax = 1
nx = 2
ny = 2
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
porosity = porosity
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
porosity = porosity
pressure = pressure
smoothing_layers = 2
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[eps_out]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[eps_out]
type = FunctorAux
variable = eps_out
functor = porosity
execute_on = 'timestep_end'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_drag]
type = PINSFVMomentumFriction
variable = u
momentum_component = 'x'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[u_correction]
type = PINSFVMomentumFrictionCorrection
variable = u
momentum_component = 'x'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
pressure = pressure
porosity = porosity
momentum_component = 'y'
[]
[v_drag]
type = PINSFVMomentumFriction
variable = v
momentum_component = 'y'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[v_correction]
type = PINSFVMomentumFrictionCorrection
variable = v
momentum_component = 'y'
rho = ${rho}
speed = speed
mu = ${mu}
[]
[v_forcing]
type = INSFVBodyForce
variable = v
functor = forcing_v
momentum_component = 'y'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
functor = 'exact_u'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
functor = 'exact_v'
[]
[walls-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = u
function = 'exact_u'
[]
[walls-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = v
function = 'exact_v'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[FunctorMaterials]
[darcy]
type = ADGenericVectorFunctorMaterial
prop_names = 'Darcy_coefficient Forchheimer_coefficient'
prop_values = '${darcy} ${darcy} ${darcy} ${forch} ${forch} ${forch}'
[]
[speed]
type = PINSFVSpeedFunctorMaterial
superficial_vel_x = u
superficial_vel_y = v
porosity = porosity
[]
[]
[Functions]
[porosity]
type = ParsedFunction
expression = '.5 + .1 * sin(pi * x / 4) * cos(pi * y / 4)'
[]
[exact_u]
type = ParsedFunction
expression = 'sin((1/2)*y*pi)*cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = 'darcy*mu*sin((1/2)*y*pi)*cos((1/2)*x*pi) + (1/2)*forch*rho*sqrt(sin((1/4)*x*pi)^2*cos((1/2)*y*pi)^2 + sin((1/2)*y*pi)^2*cos((1/2)*x*pi)^2)*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) - mu*(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)*(0.1*pi^2*sin((1/4)*x*pi)*sin((1/4)*y*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.025*pi^2*sin((1/4)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*x*pi)*cos((1/4)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.01*pi^2*sin((1/4)*x*pi)^2*sin((1/4)*y*pi)^2*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^3 - 1/4*pi^2*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)) - mu*(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)*(0.025*pi^2*sin((1/4)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*x*pi)*cos((1/4)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.1*pi^2*sin((1/2)*x*pi)*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/4)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.01*pi^2*sin((1/2)*y*pi)*cos((1/4)*x*pi)^2*cos((1/2)*x*pi)*cos((1/4)*y*pi)^2/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^3 - 1/4*pi^2*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)) + 0.025*pi*mu*(0.1*pi*sin((1/4)*x*pi)*sin((1/4)*y*pi)*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + (1/2)*pi*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5))*sin((1/4)*x*pi)*sin((1/4)*y*pi) - 0.025*pi*mu*(-0.1*pi*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/4)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - 1/2*pi*sin((1/2)*x*pi)*sin((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5))*cos((1/4)*x*pi)*cos((1/4)*y*pi) + 0.1*pi*rho*sin((1/4)*x*pi)^2*sin((1/4)*y*pi)*sin((1/2)*y*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - 0.1*pi*rho*sin((1/2)*y*pi)^2*cos((1/4)*x*pi)*cos((1/2)*x*pi)^2*cos((1/4)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - 1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) + (1/2)*pi*rho*sin((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)^2/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) - pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) - 1/4*pi*(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)*sin((1/4)*x*pi)*sin((3/2)*y*pi)'
symbol_names = 'mu rho darcy forch'
symbol_values = '${mu} ${rho} ${darcy} ${forch}'
[]
[exact_v]
type = ParsedFunction
expression = 'sin((1/4)*x*pi)*cos((1/2)*y*pi)'
[]
[forcing_v]
type = ParsedFunction
expression = 'darcy*mu*sin((1/4)*x*pi)*cos((1/2)*y*pi) + (1/2)*forch*rho*sqrt(sin((1/4)*x*pi)^2*cos((1/2)*y*pi)^2 + sin((1/2)*y*pi)^2*cos((1/2)*x*pi)^2)*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) - mu*(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)*(-0.1*pi^2*sin((1/4)*x*pi)^2*sin((1/4)*y*pi)*sin((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.025*pi^2*sin((1/4)*x*pi)^2*cos((1/4)*y*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.01*pi^2*sin((1/4)*x*pi)^3*sin((1/4)*y*pi)^2*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^3 - 1/4*pi^2*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)) - mu*(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)*(0.025*pi^2*sin((1/4)*x*pi)^2*cos((1/4)*y*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - 0.05*pi^2*cos((1/4)*x*pi)^2*cos((1/4)*y*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + 0.01*pi^2*sin((1/4)*x*pi)*cos((1/4)*x*pi)^2*cos((1/4)*y*pi)^2*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^3 - 1/16*pi^2*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)) + 0.025*pi*mu*(0.1*pi*sin((1/4)*x*pi)^2*sin((1/4)*y*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - 1/2*pi*sin((1/4)*x*pi)*sin((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5))*sin((1/4)*x*pi)*sin((1/4)*y*pi) - 0.025*pi*mu*(-0.1*pi*sin((1/4)*x*pi)*cos((1/4)*x*pi)*cos((1/4)*y*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 + (1/4)*pi*cos((1/4)*x*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5))*cos((1/4)*x*pi)*cos((1/4)*y*pi) + 0.1*pi*rho*sin((1/4)*x*pi)^3*sin((1/4)*y*pi)*cos((1/2)*y*pi)^2/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - 0.1*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/4)*y*pi)*cos((1/2)*y*pi)/(0.2*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 1)^2 - pi*rho*sin((1/4)*x*pi)^2*sin((1/2)*y*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) - 1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) + (1/4)*pi*rho*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5) + (3/2)*pi*(0.1*sin((1/4)*x*pi)*cos((1/4)*y*pi) + 0.5)*cos((1/4)*x*pi)*cos((3/2)*y*pi)'
symbol_names = 'mu rho darcy forch'
symbol_values = '${mu} ${rho} ${darcy} ${forch}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin((3/2)*y*pi)*cos((1/4)*x*pi)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi) - 1/2*pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = false
csv = true
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2v]
type = ElementL2FunctorError
approximate = v
exact = exact_v
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
type = ElementL2FunctorError
approximate = pressure
exact = exact_p
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-boussinesq.i)
mu = 1
rho = 1
k = 1e-3
cp = 1
v_inlet = 1
T_inlet = 200
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = 0
ymax = 10
nx = 20
ny = 100
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${v_inlet}
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[]
[AuxVariables]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.4
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[u_gravity]
type = PINSFVMomentumGravity
variable = superficial_vel_x
rho = ${rho}
gravity = '0 -9.81 0'
momentum_component = 'x'
porosity = porosity
[]
[u_boussinesq]
type = PINSFVMomentumBoussinesq
variable = superficial_vel_x
T_fluid = 'T_fluid'
rho = ${rho}
ref_temperature = 150
gravity = '0 -9.81 0'
momentum_component = 'x'
alpha_name = 'alpha_b'
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[v_gravity]
type = PINSFVMomentumGravity
variable = superficial_vel_y
rho = ${rho}
gravity = '-0 -9.81 0'
momentum_component = 'y'
porosity = porosity
[]
[v_boussinesq]
type = PINSFVMomentumBoussinesq
variable = superficial_vel_y
T_fluid = 'T_fluid'
rho = ${rho}
ref_temperature = 150
gravity = '0 -9.81 0'
momentum_component = 'y'
alpha_name = 'alpha_b'
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
k = ${k}
variable = T_fluid
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
function = 0
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
function = ${v_inlet}
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = '${fparse v_inlet * rho * cp * T_inlet}'
boundary = 'bottom'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = superficial_vel_y
function = 0
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'left'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'top'
variable = pressure
function = 0
[]
[]
[FunctorMaterials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv alpha_b'
prop_values = '1e-3 8e-4'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-12
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'top'
[]
[outlet-v]
type = SideAverageValue
variable = superficial_vel_y
boundary = 'top'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'top'
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc.i)
mu = 1.1
rho = 1.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '5 5'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.8
[]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Functions]
[exact_u]
type = ParsedFunction
expression = 'cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = '0.25*pi^2*mu*cos((1/2)*x*pi) - 1.25*pi*rho*sin((1/2)*x*pi)*cos((1/2)*x*pi) + 0.8*cos(x)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin(x)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/2)*x*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressureFlux
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
functor = 'exact_u'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
approximate = pressure
exact = exact_p
type = ElementL2FunctorError
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc-no-diffusion-strong-bc.i)
mu=1e-15
rho=1.1
advected_interp_method='upwind'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 2
xmax = 0.5
[]
[]
[GlobalParams]
two_term_boundary_expansion = true
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = .1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.8
[]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Functions]
[exact_u]
type = ParsedFunction
expression = 'cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = '-1.25*pi*rho*sin((1/2)*x*pi)*cos((1/2)*x*pi) + 0.8*cos(x)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin(x)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/2)*x*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressureFlux
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
force_boundary_execution = false
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[]
[FVBCs]
[mass]
variable = pressure
type = PINSFVFunctorBC
boundary = 'left right'
superficial_vel_x = u
pressure = pressure
eqn = 'mass'
porosity = porosity
[]
[momentum]
variable = u
type = PINSFVFunctorBC
boundary = 'left right'
superficial_vel_x = u
pressure = pressure
eqn = 'momentum'
momentum_component = 'x'
porosity = porosity
[]
[inlet-u]
type = FVFunctionDirichletBC
boundary = 'left'
variable = u
function = 'exact_u'
[]
[outlet_p]
type = FVFunctionDirichletBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[FunctorMaterials]
[const]
type = ADGenericFunctorMaterial
prop_names = 'rho'
prop_values = '${rho}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'bt'
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
approximate = pressure
exact = exact_p
type = ElementL2FunctorError
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient-gas.i)
# Fluid properties
mu = 'mu'
rho = 'rho'
k = 'k'
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
# Numerical scheme
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 20
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${p_outlet}
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${T_inlet}
[]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[FVKernels]
[mass_time]
type = PWCNSFVMassTimeDerivative
variable = pressure
porosity = 'porosity'
drho_dt = 'drho_dt'
[]
[mass]
type = PWCNSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = superficial_vel_x
rho = ${rho}
drho_dt = 'drho_dt'
momentum_component = 'x'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = superficial_vel_y
rho = ${rho}
drho_dt = 'drho_dt'
momentum_component = 'y'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_fluid
h = 'h'
dh_dt = 'dh_dt'
rho = ${rho}
drho_dt = 'drho_dt'
is_solid = false
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
variable = T_fluid
k = ${k}
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = porosity
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVDirichletBC
variable = T_fluid
value = ${T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = ${p_outlet}
[]
[]
[FluidProperties]
[fp]
type = IdealGasFluidProperties
gamma = 1.4
[]
[]
[FunctorMaterials]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = fp
pressure = 'pressure'
T_fluid = 'T_fluid'
speed = 'speed'
# To initialize with a high viscosity
mu_rampdown = 'mu_rampdown'
# For porous flow
characteristic_length = 1
porosity = 'porosity'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '${h_fs}'
[]
[speed]
type = PINSFVSpeedFunctorMaterial
porosity = 'porosity'
superficial_vel_x = 'superficial_vel_x'
superficial_vel_y = 'superficial_vel_y'
[]
[]
[Functions]
[mu_rampdown]
type = PiecewiseLinear
x = '1 2 3 4'
y = '1e3 1e2 1e1 1'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
automatic_scaling = true
end_time = 3.0
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = VolumetricFlowRate
boundary = 'right'
advected_quantity = '1'
advected_interp_method = ${advected_interp_method}
vel_x = 'superficial_vel_x'
vel_y = 'superficial_vel_y'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/materials/ergun/ergun.i)
# This file simulates flow of fluid in a porous elbow for the purpose of verifying
# correct implementation of the various different solution variable sets. This input
# tests correct implementation of the primitive superficial variable set. Flow enters on the top
# and exits on the right. Because the purpose is only to test the equivalence of
# different equation sets, no solid energy equation is included.
porosity_left = 0.4
porosity_right = 0.6
pebble_diameter = 0.06
mu = 1.81e-5 # This has been increased to avoid refining the mesh
M = 28.97e-3
R = 8.3144598
# inlet mass flowrate, kg/s
mdot = -10.0
# inlet mass flux (superficial)
mflux_in_superficial = ${fparse mdot / (pi * 0.5 * 0.5)}
# inlet mass flux (interstitial)
mflux_in_interstitial = ${fparse mflux_in_superficial / porosity_left}
p_initial = 201325.0
T_initial = 300.0
rho_initial = ${fparse p_initial / T_initial * M / R}
vel_y_initial = ${fparse mflux_in_interstitial / rho_initial}
vel_x_initial = 0.0
superficial_vel_y_initial = ${fparse mflux_in_superficial / rho_initial}
superficial_vel_x_initial = 1e-12
# Computation parameters
velocity_interp_method = 'rc'
advected_interp_method = 'upwind'
# ==============================================================================
# GEOMETRY AND MESH
# ==============================================================================
[Mesh]
[fmg]
type = FileMeshGenerator
file = 'ergun_in.e'
[]
coord_type = RZ
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[GlobalParams]
porosity = porosity
pebble_diameter = ${pebble_diameter}
fp = fp
# rho for the kernels. Must match fluid property!
rho = ${rho_initial}
fv = true
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
# behavior at time of test creation
two_term_boundary_expansion = false
rhie_chow_user_object = 'rc'
[]
# ==============================================================================
# VARIABLES AND KERNELS
# ==============================================================================
[Variables]
[pressure]
type = INSFVPressureVariable
initial_condition = ${p_initial}
[]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${superficial_vel_x_initial}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${superficial_vel_y_initial}
[]
[]
[FVKernels]
# Mass Equation.
[mass]
type = PINSFVMassAdvection
variable = 'pressure'
[]
# Momentum x component equation.
[vel_x_time]
type = PINSFVMomentumTimeDerivative
variable = 'superficial_vel_x'
momentum_component = 'x'
[]
[vel_x_advection]
type = PINSFVMomentumAdvection
variable = 'superficial_vel_x'
momentum_component = 'x'
[]
[vel_x_viscosity]
type = PINSFVMomentumDiffusion
variable = 'superficial_vel_x'
momentum_component = 'x'
mu = 'mu'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = 'superficial_vel_x'
pressure = pressure
momentum_component = 'x'
[]
[u_friction]
type = PINSFVMomentumFriction
variable = 'superficial_vel_x'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
momentum_component = 'x'
speed = speed
mu = 'mu'
[]
# Momentum y component equation.
[vel_y_time]
type = PINSFVMomentumTimeDerivative
variable = 'superficial_vel_y'
momentum_component = 'y'
[]
[vel_y_advection]
type = PINSFVMomentumAdvection
variable = 'superficial_vel_y'
momentum_component = 'y'
[]
[vel_y_viscosity]
type = PINSFVMomentumDiffusion
variable = 'superficial_vel_y'
momentum_component = 'y'
mu = 'mu'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = 'superficial_vel_y'
pressure = pressure
momentum_component = 'y'
[]
[v_friction]
type = PINSFVMomentumFriction
variable = 'superficial_vel_y'
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
momentum_component = 'y'
mu = 'mu'
speed = speed
[]
[gravity]
type = PINSFVMomentumGravity
variable = 'superficial_vel_y'
gravity = '0 -9.81 0'
momentum_component = 'y'
[]
[]
# ==============================================================================
# AUXVARIABLES AND AUXKERNELS
# ==============================================================================
[AuxVariables]
[T_fluid]
initial_condition = ${T_initial}
order = CONSTANT
family = MONOMIAL
[]
[vel_x]
initial_condition = ${fparse vel_x_initial}
order = CONSTANT
family = MONOMIAL
[]
[vel_y]
initial_condition = ${fparse vel_y_initial}
order = CONSTANT
family = MONOMIAL
[]
[porosity_out]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[vel_x]
type = FunctorAux
variable = vel_x
functor = vel_x_mat
[]
[vel_y]
type = FunctorAux
variable = vel_y
functor = vel_y_mat
[]
[porosity_out]
type = FunctorAux
variable = porosity_out
functor = porosity
[]
[]
# ==============================================================================
# FLUID PROPERTIES, MATERIALS AND USER OBJECTS
# ==============================================================================
[FluidProperties]
[fp]
type = IdealGasFluidProperties
k = 0.0
mu = ${mu}
gamma = 1.4
molar_mass = ${M}
[]
[]
[FunctorMaterials]
[enthalpy]
type = INSFVEnthalpyMaterial
temperature = 'T_fluid'
[]
[speed]
type = PINSFVSpeedFunctorMaterial
superficial_vel_x = 'superficial_vel_x'
superficial_vel_y = 'superficial_vel_y'
porosity = porosity
vel_x = vel_x_mat
vel_y = vel_y_mat
[]
[kappa]
type = FunctorKappaFluid
[]
[const_Fdrags_mat]
type = FunctorErgunDragCoefficients
porosity = porosity
[]
[fluidprops]
type = GeneralFunctorFluidProps
mu_rampdown = mu_func
porosity = porosity
characteristic_length = ${pebble_diameter}
T_fluid = 'T_fluid'
pressure = 'pressure'
speed = 'speed'
[]
[]
d = 0.05
[Functions]
[mu_func]
type = PiecewiseLinear
x = '1 3 5 10 15 20'
y = '1e5 1e4 1e3 1e2 1e1 1'
[]
[real_porosity_function]
type = ParsedFunction
expression = 'if (x < 0.6 - ${d}, ${porosity_left}, if (x > 0.6 + ${d}, ${porosity_right},
(x-(0.6-${d}))/(2*${d})*(${porosity_right}-${porosity_left}) + ${porosity_left}))'
[]
[porosity]
type = ParsedFunction
expression = 'if (x < 0.6 - ${d}, ${porosity_left}, if (x > 0.6 + ${d}, ${porosity_right},
(x-(0.6-${d}))/(2*${d})*(${porosity_right}-${porosity_left}) + ${porosity_left}))'
[]
[]
# ==============================================================================
# BOUNDARY CONDITIONS
# ==============================================================================
[FVBCs]
[outlet_p]
type = INSFVOutletPressureBC
variable = 'pressure'
function = ${p_initial}
boundary = 'right'
[]
## No or Free slip BC
[free-slip-wall-x]
type = INSFVNaturalFreeSlipBC
boundary = 'bottom wall_1 wall_2 left'
variable = superficial_vel_x
momentum_component = 'x'
[]
[free-slip-wall-y]
type = INSFVNaturalFreeSlipBC
boundary = 'bottom wall_1 wall_2 left'
variable = superficial_vel_y
momentum_component = 'y'
[]
## Symmetry
[symmetry-x]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = 'mu'
momentum_component = 'x'
[]
[symmetry-y]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = 'mu'
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'left'
variable = 'pressure'
[]
## inlet
[inlet_vel_x]
type = INSFVInletVelocityBC
variable = 'superficial_vel_x'
function = ${superficial_vel_x_initial}
boundary = 'top'
[]
[inlet_vel_y]
type = INSFVInletVelocityBC
variable = 'superficial_vel_y'
function = ${superficial_vel_y_initial}
boundary = 'top'
[]
[]
# ==============================================================================
# EXECUTION PARAMETERS
# ==============================================================================
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
# Problem time parameters
dtmin = 0.01
dtmax = 2000
end_time = 3000
# must be the same as the fluid
# Iterations parameters
l_max_its = 50
l_tol = 1e-8
nl_max_its = 25
# nl_rel_tol = 5e-7
nl_abs_tol = 2e-7
# Automatic scaling
automatic_scaling = true
verbose = true
[TimeStepper]
type = IterationAdaptiveDT
dt = 0.025
cutback_factor = 0.5
growth_factor = 2.0
[]
# Steady state detection.
steady_state_detection = true
steady_state_tolerance = 1e-7
steady_state_start_time = 400
[]
# ==============================================================================
# POSTPROCESSORS DEBUG AND OUTPUTS
# ==============================================================================
[Postprocessors]
[mass_flow_in]
type = VolumetricFlowRate
boundary = 'top'
vel_x = 'superficial_vel_x'
vel_y = 'superficial_vel_y'
advected_quantity = ${rho_initial}
execute_on = 'INITIAL TIMESTEP_END'
[]
[mass_flow_out]
type = VolumetricFlowRate
boundary = 'right'
vel_x = 'superficial_vel_x'
vel_y = 'superficial_vel_y'
advected_quantity = ${rho_initial}
execute_on = 'INITIAL TIMESTEP_END'
[]
[p_in]
type = SideAverageValue
variable = pressure
boundary = 'top'
[]
[dP]
type = LinearCombinationPostprocessor
pp_names = 'p_in'
pp_coefs = '1.0'
b = ${fparse -p_initial}
[]
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
mu = 1
rho = 1
k = 1e-3
cp = 1
u_inlet = 1
T_inlet = 200
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '5 5'
dy = '1.0'
ix = '50 50'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'T_solid'
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
[]
[]
[AuxVariables]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'solid_energy_diffusion solid_energy_convection'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
k = ${k}
variable = T_fluid
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[solid_energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_solid
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
inactive = 'heated-side'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = '${fparse u_inlet * rho * cp * T_inlet}'
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = 150
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[FunctorMaterials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '1'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-14
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/2d-rc-continuous.i)
mu = 1.1
rho = 1.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = -1
ymax = 1
nx = 8
ny = 8
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
porosity = porosity
pressure = pressure
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[ICs]
[porosity_continuous]
type = FunctionIC
variable = porosity
function = smooth_jump
[]
[]
[GlobalParams]
porosity = porosity
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
pressure = pressure
porosity = porosity
momentum_component = 'y'
[]
[v_forcing]
type = INSFVBodyForce
variable = v
functor = forcing_v
momentum_component = 'y'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
functor = 'exact_u'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
functor = 'exact_v'
[]
[walls-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = u
function = 'exact_u'
[]
[walls-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = v
function = 'exact_v'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
expression = '1 - 0.5 * 1 / (1 + exp(-30*(x-1))) - 0.01 * y'
[]
# Output from compute-functions-2d.py
[exact_u]
type = ParsedFunction
expression = 'sin((1/2)*y*pi)*cos((1/2)*x*pi)'
[]
[forcing_u]
type = ParsedFunction
expression = '15.0*mu*(-1/2*pi*sin((1/2)*x*pi)*sin((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 15.0*exp(30 - 30*x)*sin((1/2)*y*pi)*cos((1/2)*x*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2))*exp(30 - 30*x)/(exp(30 - 30*x) + 1)^2 + 0.01*mu*((1/2)*pi*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 0.01*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) - mu*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))*(-1/4*pi^2*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 0.01*pi*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2 + 0.0002*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^3) - mu*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))*(-1/4*pi^2*sin((1/2)*y*pi)*cos((1/2)*x*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) - 15.0*pi*exp(30 - 30*x)*sin((1/2)*x*pi)*sin((1/2)*y*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) - 450.0*exp(30 - 30*x)*sin((1/2)*y*pi)*cos((1/2)*x*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + 900.0*exp(60 - 60*x)*sin((1/2)*y*pi)*cos((1/2)*x*pi)/((exp(30 - 30*x) + 1)^3*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + 450.0*exp(60 - 60*x)*sin((1/2)*y*pi)*cos((1/2)*x*pi)/((exp(30 - 30*x) + 1)^4*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^3)) - 1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + (1/2)*pi*rho*sin((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)^2/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) - pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 0.01*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2 + 15.0*rho*exp(30 - 30*x)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi)^2/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) - 1/4*pi*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))*sin((1/4)*x*pi)*sin((3/2)*y*pi)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_v]
type = ParsedFunction
expression = 'sin((1/4)*x*pi)*cos((1/2)*y*pi)'
[]
[forcing_v]
type = ParsedFunction
expression = '0.01*mu*(-1/2*pi*sin((1/4)*x*pi)*sin((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 0.01*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + 15.0*mu*((1/4)*pi*cos((1/4)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 15.0*exp(30 - 30*x)*sin((1/4)*x*pi)*cos((1/2)*y*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2))*exp(30 - 30*x)/(exp(30 - 30*x) + 1)^2 - mu*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))*(-1/4*pi^2*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) - 0.01*pi*sin((1/4)*x*pi)*sin((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2 + 0.0002*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^3) - mu*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))*(-1/16*pi^2*sin((1/4)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) - 450.0*exp(30 - 30*x)*sin((1/4)*x*pi)*cos((1/2)*y*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + 7.5*pi*exp(30 - 30*x)*cos((1/4)*x*pi)*cos((1/2)*y*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + 900.0*exp(60 - 60*x)*sin((1/4)*x*pi)*cos((1/2)*y*pi)/((exp(30 - 30*x) + 1)^3*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + 450.0*exp(60 - 60*x)*sin((1/4)*x*pi)*cos((1/2)*y*pi)/((exp(30 - 30*x) + 1)^4*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^3)) - pi*rho*sin((1/4)*x*pi)^2*sin((1/2)*y*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) - 1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + (1/4)*pi*rho*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1)) + 0.01*rho*sin((1/4)*x*pi)^2*cos((1/2)*y*pi)^2/(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2 + 15.0*rho*exp(30 - 30*x)*sin((1/4)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)/((exp(30 - 30*x) + 1)^2*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))^2) + (3/2)*pi*(-0.01*y + 1 - 0.5/(exp(30 - 30*x) + 1))*cos((1/4)*x*pi)*cos((3/2)*y*pi)'
symbol_names = 'mu rho'
symbol_values = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
expression = 'sin((3/2)*y*pi)*cos((1/4)*x*pi)'
[]
[forcing_p]
type = ParsedFunction
expression = '-1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi) - 1/2*pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)'
symbol_names = 'rho'
symbol_values = '${rho}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
csv = true
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2FunctorError
approximate = u
exact = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2v]
type = ElementL2FunctorError
approximate = v
exact = exact_v
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
type = ElementL2FunctorError
approximate = pressure
exact = exact_p
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/1d-rc-epsjump.i)
mu = 1.1
rho = 1.1
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '30 30'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[ICs]
inactive = 'porosity_continuous'
[porosity_1]
type = ConstantIC
variable = porosity
block = 1
value = 1
[]
[porosity_2]
type = ConstantIC
variable = porosity
block = 2
value = 0.5
[]
[porosity_continuous]
type = FunctionIC
variable = porosity
block = '1 2'
function = smooth_jump
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
expression = '1 - 0.5 * 1 / (1 + exp(-30*(x-1)))'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-2d.i)
rho=1.1
advected_interp_method='upwind'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '0.5'
ix = '3 3'
iy = '2'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
porosity = porosity
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
porosity = porosity
pressure = pressure
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = BernoulliPressureVariable
u = u
v = v
porosity = porosity
rho = ${rho}
[]
[]
[AuxVariables]
[porosity]
type = PiecewiseConstantVariable
[]
[]
[ICs]
[porosity_1]
type = ConstantIC
variable = porosity
block = 1
value = 1
[]
[porosity_2]
type = ConstantIC
variable = porosity
block = 2
value = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
momentum_component = 'x'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
pressure = pressure
momentum_component = 'y'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[walls-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = u
momentum_component = 'x'
[]
[walls-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = v
momentum_component = 'y'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.4
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-10
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-effective.i)
mu = 1
rho = 1
cp = 1
u_inlet = 1
T_inlet = 200
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 100
ny = 20
[]
[left]
type = ParsedSubdomainMeshGenerator
input = gen
combinatorial_geometry = 'x > 3 & x < 6'
block_id = 1
[]
[right]
type = ParsedSubdomainMeshGenerator
input = left
combinatorial_geometry = 'x < 3'
block_id = 2
[]
[more-right]
type = ParsedSubdomainMeshGenerator
input = right
combinatorial_geometry = 'x > 6'
block_id = 3
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[]
[AuxVariables]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion_1]
type = PINSFVEnergyAnisotropicDiffusion
kappa = 'kappa'
variable = T_fluid
porosity = porosity
block = '1 2'
[]
[energy_diffusion_2]
type = PINSFVEnergyAnisotropicDiffusion
kappa = 'kappa'
variable = T_fluid
porosity = porosity
block = '3'
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
inactive = 'inlet-T-dirichlet'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = '${fparse u_inlet * rho * cp * T_inlet}'
boundary = 'left'
[]
[inlet-T-dirichlet]
type = FVDirichletBC
variable = T_fluid
value = '${T_inlet}'
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[FunctorMaterials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '1'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[kappa]
type = ADGenericVectorFunctorMaterial
prop_names = 'kappa'
prop_values = '1e-3 1e-2 1e-1'
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-12
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/bernoulli-1d-parsed-function.i)
rho = 1.1
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '3 3'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = BernoulliPressureVariable
u = u
porosity = porosity
rho = ${rho}
[]
[]
[Functions]
[porosity]
type = ParsedFunction
expression = 'if(x > 1, 0.5, 1)'
[]
[]
[AuxVariables]
[has_porosity_jump_face]
type = MooseVariableFVReal
[]
[porosity_out]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[has_porosity_jump_face]
type = HasPorosityJumpFace
porosity = porosity
execute_on = 'initial timestep_end'
variable = has_porosity_jump_face
[]
[porosity_out]
type = FunctorAux
variable = porosity_out
functor = porosity
execute_on = 'initial timestep_end'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = true
[]