MeshCut2DFunctionUserObject

Creates a UserObject for a mesh cutter in 2D problems where crack growth is specified by functions.

Overview

This class is used to define an evolving cutting plane for 2D XFEM simulations based on a mesh that defines an initial crack, and a user-defined function for growth of that crack. It (1) reads in a mesh describing the crack surface, (2) uses the mesh to do initial cutting of 2D elements, and (3) grows the mesh incrementally based on prescribed growth functions defining the direction and growth rate.

Example Input Syntax

[UserObjects]
  [cut_mesh2]
    type = MeshCut2DFunctionUserObject
    mesh_file = make_edge_crack_in.e
    growth_direction_x = growth_func_x
    growth_direction_y = growth_func_y
    growth_rate = growth_func_v
    crack_front_definition = crack_tip
  []
  [crack_tip]
    type = CrackFrontDefinition
    crack_direction_method = CurvedCrackFront
    2d = true
    crack_front_points_provider = cut_mesh2
    number_points_from_provider = 2
  []
[]

Input Parameters

growth_direction_xFunction defining x-component of crack growth direction.
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Function defining x-component of crack growth direction.
growth_direction_yFunction defining y-component of crack growth direction.
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Function defining y-component of crack growth direction.
growth_rateFunction defining crack growth rate.
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Function defining crack growth rate.
mesh_fileMesh file for the XFEM geometric cut; currently only the Exodus type is supported
C++ Type:MeshFileName
Unit:(no unit assumed)
Controllable:No
Description:Mesh file for the XFEM geometric cut; currently only the Exodus type is supported

Required Parameters

blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
crack_front_definitioncrackFrontDefinitionThe CrackFrontDefinition user object name
Default:crackFrontDefinition
C++ Type:UserObjectName
Unit:(no unit assumed)
Controllable:No
Description:The CrackFrontDefinition user object name
execute_onXFEM_MARKThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:XFEM_MARK
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Options:XFEM_MARK, FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, NONLINEAR_CONVERGENCE, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
heal_alwaysFalseHeal previous cuts at every time step
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Heal previous cuts at every time step
nucleate_uoThe MeshCutNucleation UO for nucleating cracks.
C++ Type:UserObjectName
Unit:(no unit assumed)
Controllable:No
Description:The MeshCutNucleation UO for nucleating cracks.
prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Optional Parameters

allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

Input Files

(modules/xfem/test/tests/mesh_cut_2D_fracture/crack_front_stress_function_growth.i)

(modules/xfem/test/tests/mesh_cut_2D_fracture/crack_front_stress_function_growth.i)

# checks that the stress averages computed by CrackFrontNonlocalStress are correct

# Left Crack Tip: moves in y with stress_11=y and crackFrontNormalStress is equal to y_pos+box_length/2
# At boundary when the crackFrontNormalStress box intersects the boundary, crackFrontNormalStress is properly scaled

# Right Crack Tip: moves at 45deg with stress_10&_01=y.  crackFrontNormalStress is equal to y_pos+box_length/sqrt(8)

[GlobalParams]
  displacements = 'disp_x disp_y'
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    nx = 40
    ny = 14
    xmin = -0.4
    xmax = 0.5
    ymin = 0.4
    ymax = 0.65
    elem_type = QUAD4
  []
[]

[Problem]
  solve = false
  kernel_coverage_check = false
[]

[XFEM]
  geometric_cut_userobjects = 'cut_mesh2'
  qrule = volfrac
  output_cut_plane = true
[]

[Functions]
  [growth_func_x]
    type = ParsedFunction
    expression = 'if(x<0, 0, 1)'
  []
  [growth_func_y]
    type = ParsedFunction
    expression = 1
  []
  [growth_func_v]
    type = ParsedFunction
    expression = '0.05'
  []
[]

[UserObjects]
  [cut_mesh2]
    type = MeshCut2DFunctionUserObject
    mesh_file = make_edge_crack_in.e
    growth_direction_x = growth_func_x
    growth_direction_y = growth_func_y
    growth_rate = growth_func_v
    crack_front_definition = crack_tip
  []
  [crack_tip]
    type = CrackFrontDefinition
    crack_direction_method = CurvedCrackFront
    2d = true
    crack_front_points_provider = cut_mesh2
    number_points_from_provider = 2
  []
[]

[AuxVariables]
  [disp_x]
    family = LAGRANGE
    order = FIRST
  []
  [disp_y]
    family = LAGRANGE
    order = FIRST
  []
[]

[Functions]
  [fcn_00]
    type = ParsedFunction
    expression = 'if(x<0,y,0)'
  []
  [fcn_10]
    type = ParsedFunction
    expression = 'if(x<0,0,y)'
  []
  [fcn_20]
    type = ParsedFunction
    expression = '0'
  []
  [fcn_11]
    type = ParsedFunction
    expression = '0'
  []
  [fcn_21]
    type = ParsedFunction
    expression = '0'
  []
  [fcn_22]
    type = ParsedFunction
    expression = '0'
  []
[]

[Materials]
  [tensor]
    type = GenericFunctionRankTwoTensor
    tensor_name = generic_stress
    # tensor values are column major-ordered
    tensor_functions = 'fcn_00 fcn_10 fcn_20  fcn_10 fcn_11 fcn_21  fcn_20 fcn_21 fcn_22'
    outputs = all
  []
[]

[VectorPostprocessors]
  [CrackFrontNonlocalStress]
    type = CrackFrontNonlocalStress
    base_name = generic
    crack_front_definition = crack_tip
    box_length = 0.1
    box_height = 0.05
    box_width = 0.05
  []
[]

[Executioner]
  type = Transient
  start_time = 0.0
  dt = 1.0
  end_time = 4
[]

[Outputs]
  file_base = 'stress_check'
  csv = true
[]

(modules/xfem/test/tests/mesh_cut_2D_fracture/crack_front_stress_function_growth.i)

# checks that the stress averages computed by CrackFrontNonlocalStress are correct

# Left Crack Tip: moves in y with stress_11=y and crackFrontNormalStress is equal to y_pos+box_length/2
# At boundary when the crackFrontNormalStress box intersects the boundary, crackFrontNormalStress is properly scaled

# Right Crack Tip: moves at 45deg with stress_10&_01=y.  crackFrontNormalStress is equal to y_pos+box_length/sqrt(8)

[GlobalParams]
  displacements = 'disp_x disp_y'
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    nx = 40
    ny = 14
    xmin = -0.4
    xmax = 0.5
    ymin = 0.4
    ymax = 0.65
    elem_type = QUAD4
  []
[]

[Problem]
  solve = false
  kernel_coverage_check = false
[]

[XFEM]
  geometric_cut_userobjects = 'cut_mesh2'
  qrule = volfrac
  output_cut_plane = true
[]

[Functions]
  [growth_func_x]
    type = ParsedFunction
    expression = 'if(x<0, 0, 1)'
  []
  [growth_func_y]
    type = ParsedFunction
    expression = 1
  []
  [growth_func_v]
    type = ParsedFunction
    expression = '0.05'
  []
[]

[UserObjects]
  [cut_mesh2]
    type = MeshCut2DFunctionUserObject
    mesh_file = make_edge_crack_in.e
    growth_direction_x = growth_func_x
    growth_direction_y = growth_func_y
    growth_rate = growth_func_v
    crack_front_definition = crack_tip
  []
  [crack_tip]
    type = CrackFrontDefinition
    crack_direction_method = CurvedCrackFront
    2d = true
    crack_front_points_provider = cut_mesh2
    number_points_from_provider = 2
  []
[]

[AuxVariables]
  [disp_x]
    family = LAGRANGE
    order = FIRST
  []
  [disp_y]
    family = LAGRANGE
    order = FIRST
  []
[]

[Functions]
  [fcn_00]
    type = ParsedFunction
    expression = 'if(x<0,y,0)'
  []
  [fcn_10]
    type = ParsedFunction
    expression = 'if(x<0,0,y)'
  []
  [fcn_20]
    type = ParsedFunction
    expression = '0'
  []
  [fcn_11]
    type = ParsedFunction
    expression = '0'
  []
  [fcn_21]
    type = ParsedFunction
    expression = '0'
  []
  [fcn_22]
    type = ParsedFunction
    expression = '0'
  []
[]

[Materials]
  [tensor]
    type = GenericFunctionRankTwoTensor
    tensor_name = generic_stress
    # tensor values are column major-ordered
    tensor_functions = 'fcn_00 fcn_10 fcn_20  fcn_10 fcn_11 fcn_21  fcn_20 fcn_21 fcn_22'
    outputs = all
  []
[]

[VectorPostprocessors]
  [CrackFrontNonlocalStress]
    type = CrackFrontNonlocalStress
    base_name = generic
    crack_front_definition = crack_tip
    box_length = 0.1
    box_height = 0.05
    box_width = 0.05
  []
[]

[Executioner]
  type = Transient
  start_time = 0.0
  dt = 1.0
  end_time = 4
[]

[Outputs]
  file_base = 'stress_check'
  csv = true
[]

Overview
Example Input Syntax
Input Parameters
Input Files