- inputInput mesh the operation will be applied to
C++ Type:MeshGeneratorName
Unit:(no unit assumed)
Controllable:No
Description:Input mesh the operation will be applied to
SideSetsFromNodeSetsGenerator
Mesh generator which constructs side sets from node sets
Overview
This MeshGenerator object allows the user to make matching side sets for every existing node set. It does not delete or erase the original node sets in the process. A side may only be created from several nodes if the nodes are forming a side of an element.
For example, for a 2D element, nodes from the node set must be on the two edges of a vertex of an element to make this vertex be part of the created sideset. For a 3D hexagonal element, the four nodes on the corners of a face of an element must be part of the original node set to make the quadrilateral face be part of the created side set.
In the current implementation, this operation indiscriminately converts all node sets into side sets.
commentnote
This operation can also be performed automatically at the end of the mesh generation process if construct_side_list_from_node_list = true in the [Mesh] block.
[Mesh]
construct_side_list_from_node_list = false # set to false for testing purposes
[gmg]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmax = 3
ymax = 3
zmax = 3
[]
[bounding_box]
type = BoundingBoxNodeSetGenerator
input = gmg
new_boundary = 'nodes_to_convert_to_sides'
top_right = '2.1 2.1 1.1'
bottom_left = '-0.1 -0.1 -0.1'
[]
[create_sideset]
type = SideSetsFromNodeSetsGenerator
input = bounding_box
[]
[]
Input Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set the enabled status of the MooseObject.
- save_with_nameKeep the mesh from this mesh generator in memory with the name specified
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:Keep the mesh from this mesh generator in memory with the name specified
Advanced Parameters
- nemesisFalseWhether or not to output the mesh file in the nemesisformat (only if output = true)
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not to output the mesh file in the nemesisformat (only if output = true)
- outputFalseWhether or not to output the mesh file after generating the mesh
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not to output the mesh file after generating the mesh
- show_infoFalseWhether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)
Debugging Parameters
Input Files
- (modules/combined/examples/optimization/thermomechanical/structural_sub.i)
- (modules/combined/test/tests/optimization/compliance_sensitivity/thermal_test.i)
- (modules/combined/examples/optimization/thermomechanical/thermomechanical_main.i)
- (test/tests/meshgenerators/sidesets_from_nodesets_generator/from_nodes.i)
- (modules/combined/examples/optimization/thermomechanical/thermal_sub.i)
(test/tests/meshgenerators/sidesets_from_nodesets_generator/from_nodes.i)
[Mesh]
construct_side_list_from_node_list = false # set to false for testing purposes
[gmg]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmax = 3
ymax = 3
zmax = 3
[]
[bounding_box]
type = BoundingBoxNodeSetGenerator
input = gmg
new_boundary = 'nodes_to_convert_to_sides'
top_right = '2.1 2.1 1.1'
bottom_left = '-0.1 -0.1 -0.1'
[]
[create_sideset]
type = SideSetsFromNodeSetsGenerator
input = bounding_box
[]
[]
(modules/combined/examples/optimization/thermomechanical/structural_sub.i)
vol_frac = 0.4
power = 2.0
E0 = 1.0e-6
E1 = 1.0
rho0 = 0.0
rho1 = 1.0
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[MeshGenerator]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 40
xmin = 0
xmax = 40
ymin = 0
ymax = 40
[]
[node]
type = ExtraNodesetGenerator
input = MeshGenerator
new_boundary = hold
nodes = 0
[]
[push_left]
type = ExtraNodesetGenerator
input = node
new_boundary = push_left
coord = '16 0 0'
[]
[push_center]
type = ExtraNodesetGenerator
input = push_left
new_boundary = push_center
coord = '24 0 0'
[]
[extra]
type = SideSetsFromBoundingBoxGenerator
input = push_center
bottom_left = '-0.01 17.999 0'
top_right = '5 22.001 0'
boundary_new = n1
boundaries_old = left
[]
[dirichlet_bc]
type = SideSetsFromNodeSetsGenerator
input = extra
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[Dc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[mat_den]
family = MONOMIAL
order = FIRST
initial_condition = ${vol_frac}
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = SMALL
add_variables = true
incremental = false
[]
[]
[BCs]
[no_y]
type = DirichletBC
variable = disp_y
boundary = hold
value = 0.0
[]
[no_x_symm]
type = DirichletBC
variable = disp_x
boundary = right
value = 0.0
[]
[]
[NodalKernels]
[push_left]
type = NodalGravity
variable = disp_y
boundary = push_left
gravity_value = -1.0e-3
mass = 1
[]
[push_center]
type = NodalGravity
variable = disp_y
boundary = push_center
gravity_value = -1.0e-3
mass = 1
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeVariableIsotropicElasticityTensor
youngs_modulus = E_phys
poissons_ratio = poissons_ratio
args = 'mat_den'
[]
[E_phys]
type = DerivativeParsedMaterial
expression = "A1:=(${E0}-${E1})/(${rho0}^${power}-${rho1}^${power}); "
"B1:=${E0}-A1*${rho0}^${power}; E1:=A1*mat_den^${power}+B1; E1"
coupled_variables = 'mat_den'
property_name = E_phys
[]
[poissons_ratio]
type = GenericConstantMaterial
prop_names = poissons_ratio
prop_values = 0.3
[]
[stress]
type = ComputeLinearElasticStress
[]
[dc]
type = ComplianceSensitivity
design_density = mat_den
youngs_modulus = E_phys
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[UserObjects]
[rad_avg]
type = RadialAverage
radius = 1.2
weights = linear
prop_name = sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
[calc_sense]
type = SensitivityFilter
density_sensitivity = Dc
design_density = mat_den
filter_UO = rad_avg
execute_on = TIMESTEP_END
force_postaux = true
[]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
nl_abs_tol = 1e-12
dt = 1.0
num_steps = 500
[]
[Outputs]
exodus = true
[out]
type = CSV
execute_on = 'TIMESTEP_END'
[]
print_linear_residuals = false
[]
[Postprocessors]
[mesh_volume]
type = VolumePostprocessor
execute_on = 'INITIAL TIMESTEP_END'
[]
[total_vol]
type = ElementIntegralVariablePostprocessor
variable = mat_den
execute_on = 'INITIAL TIMESTEP_END'
[]
[vol_frac]
type = ParsedPostprocessor
expression = 'total_vol / mesh_volume'
pp_names = 'total_vol mesh_volume'
[]
[sensitivity]
type = ElementIntegralMaterialProperty
mat_prop = sensitivity
[]
[objective]
type = ElementIntegralMaterialProperty
mat_prop = strain_energy_density
execute_on = 'INITIAL TIMESTEP_END'
[]
[]
(modules/combined/test/tests/optimization/compliance_sensitivity/thermal_test.i)
vol_frac = 0.4
cost_frac = 10.0
power = 2.0
E0 = 1.0e-6
E1 = 1.0
rho0 = 0.0
rho1 = 1.0
C0 = 1.0e-6
C1 = 1.0
TC0 = 1.0e-16
TC1 = 1.0
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[MeshGenerator]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
xmin = 0
xmax = 40
ymin = 0
ymax = 40
[]
[node]
type = ExtraNodesetGenerator
input = MeshGenerator
new_boundary = hold
nodes = 0
[]
[push_left]
type = ExtraNodesetGenerator
input = node
new_boundary = push_left
coord = '16 0 0'
[]
[push_center]
type = ExtraNodesetGenerator
input = push_left
new_boundary = push_center
coord = '24 0 0'
[]
[extra]
type = SideSetsFromBoundingBoxGenerator
input = push_center
bottom_left = '-0.01 17.999 0'
top_right = '5 22.001 0'
boundary_new = n1
included_boundaries = left
[]
[dirichlet_bc]
type = SideSetsFromNodeSetsGenerator
input = extra
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[temp]
initial_condition = 100.0
[]
[]
[AuxVariables]
[Dc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[Cc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[Tc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[Cost]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[mat_den]
family = MONOMIAL
order = FIRST
initial_condition = ${vol_frac}
[]
[]
[AuxKernels]
[Cost]
type = MaterialRealAux
variable = Cost
property = Cost_mat
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temp
diffusion_coefficient = thermal_cond
[]
[heat_source]
type = HeatSource
value = 1e-2 # W/m^3
variable = temp
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = SMALL
add_variables = true
incremental = false
[]
[]
[BCs]
[no_y]
type = DirichletBC
variable = disp_y
boundary = hold
value = 0.0
[]
[no_x_symm]
type = DirichletBC
variable = disp_x
boundary = right
value = 0.0
[]
[left_n1]
type = DirichletBC
variable = temp
boundary = n1
value = 0.0
[]
[top]
type = NeumannBC
variable = temp
boundary = top
value = 0
[]
[bottom]
type = NeumannBC
variable = temp
boundary = bottom
value = 0
[]
[right]
type = NeumannBC
variable = temp
boundary = right
value = 0
[]
[left]
type = NeumannBC
variable = temp
boundary = left
value = 0
[]
[]
[NodalKernels]
[push_left]
type = NodalGravity
variable = disp_y
boundary = push_left
gravity_value = 0.0 # -1e-8
mass = 1
[]
[push_center]
type = NodalGravity
variable = disp_y
boundary = push_center
gravity_value = 0.0 # -1e-8
mass = 1
[]
[]
[Materials]
[thermal_cond]
type = DerivativeParsedMaterial
# ordered multimaterial simp
expression = "A1:=(${TC0}-${TC1})/(${rho0}^${power}-${rho1}^${power}); "
"B1:=${TC0}-A1*${rho0}^${power}; TC1:=A1*mat_den^${power}+B1; TC1"
coupled_variables = 'mat_den'
property_name = thermal_cond
outputs = 'exodus'
[]
[thermal_compliance]
type = ThermalCompliance
temperature = temp
thermal_conductivity = thermal_cond
outputs = 'exodus'
[]
[elasticity_tensor]
type = ComputeVariableIsotropicElasticityTensor
youngs_modulus = E_phys
poissons_ratio = poissons_ratio
args = 'mat_den'
[]
[E_phys]
type = DerivativeParsedMaterial
# ordered multimaterial simp
expression = "A1:=(${E0}-${E1})/(${rho0}^${power}-${rho1}^${power}); "
"B1:=${E0}-A1*${rho0}^${power}; E1:=A1*mat_den^${power}+B1; E1"
coupled_variables = 'mat_den'
property_name = E_phys
[]
[Cost_mat]
type = DerivativeParsedMaterial
# ordered multimaterial simp
expression = "A1:=(${C0}-${C1})/(${rho0}^(1/${power})-${rho1}^(1/${power})); "
"B1:=${C0}-A1*${rho0}^(1/${power}); C1:=A1*mat_den^(1/${power})+B1; C1"
coupled_variables = 'mat_den'
property_name = Cost_mat
[]
[CostDensity]
type = ParsedMaterial
property_name = CostDensity
coupled_variables = 'mat_den Cost'
expression = 'mat_den*Cost'
[]
[poissons_ratio]
type = GenericConstantMaterial
prop_names = poissons_ratio
prop_values = 0.3
[]
[stress]
type = ComputeLinearElasticStress
[]
[dc]
type = ComplianceSensitivity
design_density = mat_den
youngs_modulus = E_phys
[]
[cc]
type = CostSensitivity
design_density = mat_den
cost = Cost_mat
outputs = 'exodus'
[]
[tc]
type = ThermalSensitivity
design_density = mat_den
thermal_conductivity = thermal_cond
temperature = temp
outputs = 'exodus'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[UserObjects]
[rad_avg]
type = RadialAverage
radius = 0.1
weights = linear
prop_name = sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
[rad_avg_cost]
type = RadialAverage
radius = 0.1
weights = linear
prop_name = cost_sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
[rad_avg_thermal]
type = RadialAverage
radius = 0.1
weights = linear
prop_name = thermal_sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
[update]
type = DensityUpdateTwoConstraints
density_sensitivity = Dc
cost_density_sensitivity = Cc
cost = Cost
cost_fraction = ${cost_frac}
design_density = mat_den
volume_fraction = ${vol_frac}
bisection_lower_bound = 0
bisection_upper_bound = 1.0e12 # 100
use_thermal_compliance = true
thermal_sensitivity = Tc
weight_mechanical_thermal = '0 1'
relative_tolerance = 1.0e-12
bisection_move = 0.015
adaptive_move = false
execute_on = TIMESTEP_BEGIN
[]
# Provides Dc
[calc_sense]
type = SensitivityFilter
density_sensitivity = Dc
design_density = mat_den
filter_UO = rad_avg
execute_on = TIMESTEP_END
force_postaux = true
[]
# Provides Cc
[calc_sense_cost]
type = SensitivityFilter
density_sensitivity = Cc
design_density = mat_den
filter_UO = rad_avg_cost
execute_on = TIMESTEP_END
force_postaux = true
[]
# Provides Tc
[calc_sense_thermal]
type = SensitivityFilter
density_sensitivity = Tc
design_density = mat_den
filter_UO = rad_avg_thermal
execute_on = TIMESTEP_END
force_postaux = true
[]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
nl_abs_tol = 1e-12
dt = 1.0
num_steps = 5
[]
[Outputs]
exodus = true
[out]
type = CSV
execute_on = 'TIMESTEP_END'
[]
print_linear_residuals = false
[]
[Postprocessors]
[right_flux]
type = SideDiffusiveFluxAverage
variable = temp
boundary = right
diffusivity = 10
[]
[mesh_volume]
type = VolumePostprocessor
execute_on = 'initial timestep_end'
[]
[total_vol]
type = ElementIntegralVariablePostprocessor
variable = mat_den
execute_on = 'INITIAL TIMESTEP_END'
[]
[vol_frac]
type = ParsedPostprocessor
expression = 'total_vol / mesh_volume'
pp_names = 'total_vol mesh_volume'
[]
[sensitivity]
type = ElementIntegralMaterialProperty
mat_prop = sensitivity
[]
[cost_sensitivity]
type = ElementIntegralMaterialProperty
mat_prop = cost_sensitivity
[]
[cost]
type = ElementIntegralMaterialProperty
mat_prop = CostDensity
[]
[cost_frac]
type = ParsedPostprocessor
expression = 'cost / mesh_volume'
pp_names = 'cost mesh_volume'
[]
[objective]
type = ElementIntegralMaterialProperty
mat_prop = strain_energy_density
execute_on = 'INITIAL TIMESTEP_END'
[]
[objective_thermal]
type = ElementIntegralMaterialProperty
mat_prop = thermal_compliance
execute_on = 'INITIAL TIMESTEP_END'
[]
[]
(modules/combined/examples/optimization/thermomechanical/thermomechanical_main.i)
vol_frac = 0.4
power = 2.0
E0 = 1.0e-6
E1 = 1.0
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[MeshGenerator]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 40
xmin = 0
xmax = 40
ymin = 0
ymax = 40
[]
[node]
type = ExtraNodesetGenerator
input = MeshGenerator
new_boundary = hold
nodes = 0
[]
[push_left]
type = ExtraNodesetGenerator
input = node
new_boundary = push_left
coord = '16 0 0'
[]
[push_center]
type = ExtraNodesetGenerator
input = push_left
new_boundary = push_center
coord = '24 0 0'
[]
[extra]
type = SideSetsFromBoundingBoxGenerator
input = push_center
bottom_left = '-0.01 17.999 0'
top_right = '5 22.001 0'
boundary_new = n1
boundaries_old = left
[]
[dirichlet_bc]
type = SideSetsFromNodeSetsGenerator
input = extra
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[mat_den]
family = MONOMIAL
order = FIRST
initial_condition = 0.02
[]
[sensitivity_one]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[sensitivity_two]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[total_sensitivity]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[]
[AuxKernels]
[total_sensitivity]
type = ParsedAux
variable = total_sensitivity
expression = '(1-1.0e-7)*sensitivity_one + 1.0e-7*sensitivity_two'
coupled_variables = 'sensitivity_one sensitivity_two'
execute_on = 'LINEAR TIMESTEP_END'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = SMALL
add_variables = true
incremental = false
[]
[]
[BCs]
[no_y]
type = DirichletBC
variable = disp_y
boundary = hold
value = 0.0
[]
[no_x_symm]
type = DirichletBC
variable = disp_x
boundary = right
value = 0.0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeVariableIsotropicElasticityTensor
youngs_modulus = E_phys
poissons_ratio = poissons_ratio
args = 'mat_den'
[]
[E_phys]
type = DerivativeParsedMaterial
# Emin + (density^penal) * (E0 - Emin)
expression = '${E1} + (mat_den ^ ${power}) * (${E1}-${E0})'
coupled_variables = 'mat_den'
property_name = E_phys
[]
[poissons_ratio]
type = GenericConstantMaterial
prop_names = poissons_ratio
prop_values = 0.3
[]
[stress]
type = ComputeLinearElasticStress
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[UserObjects]
# We do filtering in the subapps
[update]
type = DensityUpdate
density_sensitivity = total_sensitivity
design_density = mat_den
volume_fraction = ${vol_frac}
execute_on = MULTIAPP_FIXED_POINT_BEGIN
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
nl_abs_tol = 1e-8
dt = 1.0
num_steps = 2
[]
[Outputs]
[out]
type = CSV
execute_on = 'TIMESTEP_END'
[]
print_linear_residuals = false
exodus = true
[]
[Postprocessors]
[mesh_volume]
type = VolumePostprocessor
execute_on = 'initial timestep_end'
[]
[total_vol]
type = ElementIntegralVariablePostprocessor
variable = mat_den
execute_on = 'INITIAL TIMESTEP_END'
[]
[vol_frac]
type = ParsedPostprocessor
expression = 'total_vol / mesh_volume'
pp_names = 'total_vol mesh_volume'
[]
[sensitivity]
type = ElementIntegralVariablePostprocessor
variable = total_sensitivity
[]
[]
[MultiApps]
[sub_app_one]
type = TransientMultiApp
input_files = structural_sub.i
[]
[sub_app_two]
type = TransientMultiApp
input_files = thermal_sub.i
[]
[]
[Transfers]
# First SUB-APP: STRUCTURAL
# To subapp densities
[subapp_one_density]
type = MultiAppCopyTransfer
to_multi_app = sub_app_one
source_variable = mat_den # Here
variable = mat_den
[]
# From subapp sensitivity
[subapp_one_sensitivity]
type = MultiAppCopyTransfer
from_multi_app = sub_app_one
source_variable = Dc # sensitivity_var
variable = sensitivity_one # Here
[]
# Second SUB-APP: HEAT CONDUCTIVITY
# To subapp densities
[subapp_two_density]
type = MultiAppCopyTransfer
to_multi_app = sub_app_two
source_variable = mat_den # Here
variable = mat_den
[]
# From subapp sensitivity
[subapp_two_sensitivity]
type = MultiAppCopyTransfer
from_multi_app = sub_app_two
source_variable = Tc # sensitivity_var
variable = sensitivity_two # Here
[]
[]
(test/tests/meshgenerators/sidesets_from_nodesets_generator/from_nodes.i)
[Mesh]
construct_side_list_from_node_list = false # set to false for testing purposes
[gmg]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmax = 3
ymax = 3
zmax = 3
[]
[bounding_box]
type = BoundingBoxNodeSetGenerator
input = gmg
new_boundary = 'nodes_to_convert_to_sides'
top_right = '2.1 2.1 1.1'
bottom_left = '-0.1 -0.1 -0.1'
[]
[create_sideset]
type = SideSetsFromNodeSetsGenerator
input = bounding_box
[]
[]
(modules/combined/examples/optimization/thermomechanical/thermal_sub.i)
vol_frac = 0.4
power = 2.0
E0 = 1.0e-6
E1 = 1.0
rho0 = 0.0
rho1 = 1.0
C0 = 1.0e-6
C1 = 1.0
TC0 = 1.0e-16
TC1 = 1.0
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[MeshGenerator]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 40
xmin = 0
xmax = 40
ymin = 0
ymax = 40
[]
[node]
type = ExtraNodesetGenerator
input = MeshGenerator
new_boundary = hold
nodes = 0
[]
[push_left]
type = ExtraNodesetGenerator
input = node
new_boundary = push_left
coord = '16 0 0'
[]
[push_center]
type = ExtraNodesetGenerator
input = push_left
new_boundary = push_center
coord = '24 0 0'
[]
[extra]
type = SideSetsFromBoundingBoxGenerator
input = push_center
bottom_left = '-0.01 17.999 0'
top_right = '5 22.001 0'
boundary_new = n1
boundaries_old = left
[]
[dirichlet_bc]
type = SideSetsFromNodeSetsGenerator
input = extra
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[temp]
initial_condition = 100.0
[]
[]
[AuxVariables]
[Dc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[Cc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[Tc]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[Cost]
family = MONOMIAL
order = FIRST
initial_condition = -1.0
[]
[mat_den]
family = MONOMIAL
order = FIRST
initial_condition = ${vol_frac}
[]
[]
[AuxKernels]
[Cost]
type = MaterialRealAux
variable = Cost
property = Cost_mat
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temp
diffusion_coefficient = thermal_cond
[]
[heat_source]
type = HeatSource
value = 1e-2 # W/m^3
variable = temp
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = SMALL
add_variables = true
incremental = false
[]
[]
[BCs]
[no_y]
type = DirichletBC
variable = disp_y
boundary = hold
value = 0.0
[]
[no_x_symm]
type = DirichletBC
variable = disp_x
boundary = right
value = 0.0
[]
[left_n1]
type = DirichletBC
variable = temp
boundary = n1
value = 0.0
[]
[top]
type = NeumannBC
variable = temp
boundary = top
value = 0
[]
[bottom]
type = NeumannBC
variable = temp
boundary = bottom
value = 0
[]
[right]
type = NeumannBC
variable = temp
boundary = right
value = 0
[]
[left]
type = NeumannBC
variable = temp
boundary = left
value = 0
[]
[]
[NodalKernels]
[push_left]
type = NodalGravity
variable = disp_y
boundary = push_left
gravity_value = 0.0 # -1e-8
mass = 1
[]
[push_center]
type = NodalGravity
variable = disp_y
boundary = push_center
gravity_value = 0.0 # -1e-8
mass = 1
[]
[]
[Materials]
[thermal_cond]
type = DerivativeParsedMaterial
# ordered multimaterial simp
expression = "A1:=(${TC0}-${TC1})/(${rho0}^${power}-${rho1}^${power}); "
"B1:=${TC0}-A1*${rho0}^${power}; TC1:=A1*mat_den^${power}+B1; TC1"
coupled_variables = 'mat_den'
property_name = thermal_cond
outputs = 'exodus'
[]
[thermal_compliance]
type = ThermalCompliance
temperature = temp
thermal_conductivity = thermal_cond
outputs = 'exodus'
[]
[elasticity_tensor]
type = ComputeVariableIsotropicElasticityTensor
youngs_modulus = E_phys
poissons_ratio = poissons_ratio
args = 'mat_den'
[]
[E_phys]
type = DerivativeParsedMaterial
# ordered multimaterial simp
expression = "A1:=(${E0}-${E1})/(${rho0}^${power}-${rho1}^${power}); "
"B1:=${E0}-A1*${rho0}^${power}; E1:=A1*mat_den^${power}+B1; E1"
coupled_variables = 'mat_den'
property_name = E_phys
[]
[Cost_mat]
type = DerivativeParsedMaterial
# ordered multimaterial simp
expression = "A1:=(${C0}-${C1})/(${rho0}^(1/${power})-${rho1}^(1/${power})); "
"B1:=${C0}-A1*${rho0}^(1/${power}); C1:=A1*mat_den^(1/${power})+B1; C1"
coupled_variables = 'mat_den'
property_name = Cost_mat
[]
[CostDensity]
type = ParsedMaterial
property_name = CostDensity
coupled_variables = 'mat_den Cost'
expression = 'mat_den*Cost'
[]
[poissons_ratio]
type = GenericConstantMaterial
prop_names = poissons_ratio
prop_values = 0.3
[]
[stress]
type = ComputeLinearElasticStress
[]
[dc]
type = ComplianceSensitivity
design_density = mat_den
youngs_modulus = E_phys
[]
[cc]
type = CostSensitivity
design_density = mat_den
cost = Cost_mat
outputs = 'exodus'
[]
[tc]
type = ThermalSensitivity
design_density = mat_den
thermal_conductivity = thermal_cond
temperature = temp
outputs = 'exodus'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[UserObjects]
[rad_avg]
type = RadialAverage
radius = 0.1
weights = linear
prop_name = sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
[rad_avg_cost]
type = RadialAverage
radius = 0.1
weights = linear
prop_name = cost_sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
[rad_avg_thermal]
type = RadialAverage
radius = 0.1
weights = linear
prop_name = thermal_sensitivity
execute_on = TIMESTEP_END
force_preaux = true
[]
# Provides Dc
[calc_sense]
type = SensitivityFilter
density_sensitivity = Dc
design_density = mat_den
filter_UO = rad_avg
execute_on = TIMESTEP_END
force_postaux = true
[]
# Provides Cc
[calc_sense_cost]
type = SensitivityFilter
density_sensitivity = Cc
design_density = mat_den
filter_UO = rad_avg_cost
execute_on = TIMESTEP_END
force_postaux = true
[]
# Provides Tc
[calc_sense_thermal]
type = SensitivityFilter
density_sensitivity = Tc
design_density = mat_den
filter_UO = rad_avg_thermal
execute_on = TIMESTEP_END
force_postaux = true
[]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
nl_abs_tol = 1e-12
dt = 1.0
num_steps = 500
[]
[Outputs]
exodus = true
[out]
type = CSV
execute_on = 'TIMESTEP_END'
[]
print_linear_residuals = false
[]
[Postprocessors]
[right_flux]
type = SideDiffusiveFluxAverage
variable = temp
boundary = right
diffusivity = 10
[]
[mesh_volume]
type = VolumePostprocessor
execute_on = 'initial timestep_end'
[]
[total_vol]
type = ElementIntegralVariablePostprocessor
variable = mat_den
execute_on = 'INITIAL TIMESTEP_END'
[]
[vol_frac]
type = ParsedPostprocessor
expression = 'total_vol / mesh_volume'
pp_names = 'total_vol mesh_volume'
[]
[sensitivity]
type = ElementIntegralMaterialProperty
mat_prop = sensitivity
[]
[cost_sensitivity]
type = ElementIntegralMaterialProperty
mat_prop = cost_sensitivity
[]
[cost]
type = ElementIntegralMaterialProperty
mat_prop = CostDensity
[]
[cost_frac]
type = ParsedPostprocessor
expression = 'cost / mesh_volume'
pp_names = 'cost mesh_volume'
[]
[objective]
type = ElementIntegralMaterialProperty
mat_prop = strain_energy_density
execute_on = 'INITIAL TIMESTEP_END'
[]
[objective_thermal]
type = ElementIntegralMaterialProperty
mat_prop = thermal_compliance
execute_on = 'INITIAL TIMESTEP_END'
[]
[]