- C_ijklStiffness tensor for material
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Stiffness tensor for material
Compute Elasticity Tensor CP
Compute an elasticity tensor for crystal plasticity.
Description
The material ComputeElasticityTensorCP is used to create an elasticity tensor for crystal plasticity simulations. This material builds an orthotropic elasticity tensor using the fill_method symmetric9 from ComputeElasticityTensor. ComputeElasticityTensorCP rotates the elasticity tensor both during the initial setup step, if Euler angles are provided, and at the start of each timestep.
warningwarning:Crystal Plasticity Simulations use Active Rotation
The rotation matrix used in this class,ComputeElasticityTensorCP, is the transpose of the rotation matrix created from the Bunge Euler angles in the base class, ComputeElasticityTensor. This difference in the rotation matrix is because of the active rotation convention used in crystal plasticity simulations.
The fill method symmetric9 is appropriate for materials with three orthotropic planes of symmetry (Malvern, 1969), and is used for simulations of anisotropic materials such as cubic crystals. The engineering elasticity tensor notation for an orthotropic material is given in Eq. (1): (1)
Rotation Tensor Conventions
The Euler angle convention used in ComputeElasticityTensorCP is the -- (3-1-3) convention. The Euler angles arguments are expected in degrees, not radians, and are denoted as , , and , corresponding to the axis rotations. The rotation tensor, , is calculated from the current Euler angles at each timestep as shown in Eq. (2). (2) The elasticity tensor is then rotated with Eq. (3) (3) at the beginning of each material timestep calculation.
The crystal plasticity materials, including ComputeElasticityTensorCP employ an active rotation: the crystal system is rotated into the sample (loading) coordinate system. Generally the Bunge Euler angles are used to describe a passive rotation: rotating the sample coordinate system into the crystal coordinate system. As a result, the rotation tensor applied is the transpose of the rotation tensor given in Eq. (2) as noted in Eq. (3).
As in the base class ComputeElasticityTensor, ComputeElasticityTensorCP can also accept the rotation matrix, given as a series of nine entries. As with the Euler angle input parameter values, note that this crystal plasticity class uses the "passive" rotation convention.
Example Input File Syntax
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[]
Input Parameters
- base_nameOptional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:Optional parameter that allows the user to define multiple mechanics material systems on the same block, i.e. for multiple phases
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- computeTrueWhen false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When false, MOOSE will not call compute methods on this material. The user must call computeProperties() after retrieving the MaterialBase via MaterialBasePropertyInterface::getMaterialBase(). Non-computed MaterialBases are not sorted for dependencies.
- constant_onNONEWhen ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
Default:NONE
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:NONE, ELEMENT, SUBDOMAIN
Controllable:No
Description:When ELEMENT, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps.When SUBDOMAIN, MOOSE will only call computeQpProperties() for the 0th quadrature point, and then copy that value to the other qps. Evaluations on element qps will be skipped
- declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
- elasticity_tensor_prefactorOptional function to use as a scalar prefactor on the elasticity tensor.
C++ Type:FunctionName
Unit:(no unit assumed)
Controllable:No
Description:Optional function to use as a scalar prefactor on the elasticity tensor.
- euler_angle_10Euler angle in direction 1
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Euler angle in direction 1
- euler_angle_20Euler angle in direction 2
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Euler angle in direction 2
- euler_angle_30Euler angle in direction 3
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Euler angle in direction 3
- euler_angle_variablesVector of coupled variables representing the Euler angles' components.
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Vector of coupled variables representing the Euler angles' components.
- fill_methodsymmetric9The fill method
Default:symmetric9
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:antisymmetric, symmetric9, symmetric21, general_isotropic, symmetric_isotropic, symmetric_isotropic_E_nu, antisymmetric_isotropic, axisymmetric_rz, general, principal, orthotropic
Controllable:No
Description:The fill method
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- read_prop_user_objectThe ElementReadPropertyFile GeneralUserObject to read element specific property values from file
C++ Type:UserObjectName
Unit:(no unit assumed)
Controllable:No
Description:The ElementReadPropertyFile GeneralUserObject to read element specific property values from file
- rotation_matrixRotation matrix to apply to elasticity tensor.
C++ Type:libMesh::TensorValue<double>
Unit:(no unit assumed)
Controllable:No
Description:Rotation matrix to apply to elasticity tensor.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
- outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Unit:(no unit assumed)
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object
Outputs Parameters
Input Files
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/use_substep_dt.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/test.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/substep.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/fileread.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/use_substep_dt.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/cp_slip_rate_integ/crysp.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/prop_block_read.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/thermal_eigenstrain_test.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/euler_angles/euler_angle_auxvar.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/hcp_volumetric_eigenstrain.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_linesearch.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/exception.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/coplanar_twin_hardening.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_read_slip_prop.i)
- (modules/solid_mechanics/test/tests/elem_prop_read_user_object/prop_grain_read_3d.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/linesearch.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_representative_slip_systems.i)
- (modules/contact/examples/2d_indenter/indenter_rz_fine.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/combined_twinning_slip_111tension.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/orthotropic_rotation_Cijkl.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_aprismatic_capyramidal.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_aprismatic_active.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/euler_angles/euler_angle_conflict.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/only_twinning_fcc.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/multiple_eigenstrains_test.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/orthotropic_rotation_Cijkl.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_save_euler.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/cp_slip_rate_integ/crysp_substep.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/combined_twinning_slip_error.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_capyramidal_active.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/user_object_011orientation.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_user_object.i)
- (modules/solid_mechanics/test/tests/elem_prop_read_user_object/prop_grain_read.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_no_substructure.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/orthotropic_rotation_Cijkl.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_convergence_issue_flag.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_substep.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/substep.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/hcp_thermal_eigenstrain.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_method_test.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/check_direction_twin_propagation.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/patch_recovery.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_euler_angle.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_no_negative_aprismatic.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/cp_slip_rate_integ/crysp_linesearch.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_twinning/modified_kalidindi_for_hcp.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/user_object_Voce_BCC.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/volumetric_eigenstrain_increase.i)
- (modules/contact/examples/3d_berkovich/indenter_berkovich_friction.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/user_object.i)
- (modules/solid_mechanics/test/tests/nodal_patch_recovery/patch_recovery.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/volumetric_eigenstrain_parabolic.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/combined_twinning_slip_100compression.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/non_coplanar_twin_hardening.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/bicrystal_test.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_method_011orientation.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/hcp_volumetric_eigenstrain_decrease.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_cutback.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/save_euler.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_twinning/demonstration_combined_hcp_slip_twins.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/patch_recovery.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_fileread.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/twinning/upper_twin_fraction_limit.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_basal_active.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/exception.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/linesearch.i)
- (modules/solid_mechanics/test/tests/elem_prop_read_user_object/prop_elem_read.i)
- (modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/rotation_matrix_update_euler_angle_111_orientation.i)
References
- Lawrence E Malvern.
Introduction to the Mechanics of a Continuous Medium.
Prentice-Hall, 1969.[BibTeX]
@book{malvern1969introduction, author = "Malvern, Lawrence E", title = "Introduction to the Mechanics of a Continuous Medium", year = "1969", publisher = "Prentice-Hall" }
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_method_test.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_increment
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[slip_increment]
type = ElementAverageValue
variable = slip_increment
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 0.01
dtmax = 10.0
num_steps = 10
[]
[Outputs]
exodus = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/use_substep_dt.i)
[GlobalParams]
displacements = 'ux uy uz'
[]
[Mesh]
type = GeneratedMesh
dim = 3
nx = 4
ny = 4
nz = 4
elem_type = HEX8
displacements = 'ux uy uz'
[]
[AuxVariables]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[rotout]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_increment
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[]
[pushy]
type = FunctionDirichletBC
variable = uy
boundary = top
function = '-0.1*t'
[]
[pullz]
type = FunctionDirichletBC
variable = uz
boundary = front
function = '0.1*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
maximum_substep_iteration = 1
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[slip_increment]
type = ElementAverageValue
variable = slip_increment
[]
[uy_avg_top]
type = SideAverageValue
variable = uy
boundary = top
[]
[uz_avg_front]
type = SideAverageValue
variable = uz
boundary = front
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1.0
num_steps = 5
dtmin = 0.001
nl_abs_step_tol = 1e-10
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/test.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[./pk2]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[./slip_increment]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[./pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = pk2
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_rate_gss
index = 0
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./pk2]
type = ElementAverageValue
variable = pk2
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[./slip_increment]
type = ElementAverageValue
variable = slip_increment
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
dtmin = 0.05
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/substep.i)
[GlobalParams]
displacements = 'ux uy uz'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = 0.01*t
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
maximum_substep_iteration = 10
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
resistance_tol = 1.0e-2
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 2.0
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
dtmin = 0.5
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
csv = true
gnuplot = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/fileread.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
[../]
[./uy]
[../]
[./uz]
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
intvar_read_type = file_input
state_variable_file_name = input_state_variable.txt
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'ux uy uz'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.05
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/use_substep_dt.i)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 4
ny = 4
nz = 4
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[ux]
[]
[uy]
[]
[uz]
[]
[]
[AuxVariables]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[rotout]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment]
order = CONSTANT
family = MONOMIAL
[]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[]
[]
[AuxKernels]
[stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = pk2
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[]
[slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_rate_gss
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[]
[pushy]
type = FunctionDirichletBC
variable = uy
boundary = top
function = '-0.1*t'
[]
[pullz]
type = FunctionDirichletBC
variable = uz
boundary = front
function = '0.1*t'
[]
[]
[UserObjects]
[slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[]
[slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[]
[state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[]
[state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[]
[]
[Materials]
[crysp]
type = FiniteStrainUObasedCP
block = 0
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[]
[strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[]
[elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[slip_increment]
type = ElementAverageValue
variable = slip_increment
[]
[uy_avg_top]
type = SideAverageValue
variable = uy
boundary = top
[]
[uz_avg_front]
type = SideAverageValue
variable = uz
boundary = front
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1.0
num_steps = 5
dtmin = 0.001
nl_abs_step_tol = 1e-10
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/cp_slip_rate_integ/crysp.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCPSlipRateRes
gtol = 1e-2
rtol = 1e-8
abs_tol = 1e-15
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
slip_incr_tol = 1
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'disp_x disp_y disp_z'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
dt = 0.2
dtmin = 0.05
dtmax = 10.0
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
end_time = 1
[]
[Outputs]
file_base = out
exodus = true
print_linear_residuals = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/prop_block_read.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
ymin = 0
xmax = 1
ymax = 1
nx = 2
ny = 2
elem_type = QUAD4
[]
[./subdomain_id]
input = gen
type = SubdomainPerElementGenerator
subdomain_ids = '0 1
0 1'
[../]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[GlobalParams]
volumetric_locking_correction = true
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[./euler1]
order = CONSTANT
family = MONOMIAL
[../]
[./euler2]
order = CONSTANT
family = MONOMIAL
[../]
[./euler3]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = block
nblock= 2
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = lage
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[./euler1]
type = MaterialRealVectorValueAux
variable = euler1
property = Euler_angles
component = 0
execute_on = timestep_end
[../]
[./euler2]
type = MaterialRealVectorValueAux
variable = euler2
property = Euler_angles
component = 1
execute_on = timestep_end
[../]
[./euler3]
type = MaterialRealVectorValueAux
variable = euler3
property = Euler_angles
component = 2
execute_on = timestep_end
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'disp_x disp_y'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.01
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.01
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/thermal_eigenstrain_test.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[eth_xx]
order = CONSTANT
family = MONOMIAL
[]
[eth_yy]
order = CONSTANT
family = MONOMIAL
[]
[eth_zz]
order = CONSTANT
family = MONOMIAL
[]
[fth_xx]
order = CONSTANT
family = MONOMIAL
[]
[fth_yy]
order = CONSTANT
family = MONOMIAL
[]
[fth_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = '300+400*t' # temperature increases at a constant rate
execute_on = timestep_begin
[]
[eth_xx]
type = RankTwoAux
variable = eth_xx
rank_two_tensor = thermal_eigenstrain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[eth_yy]
type = RankTwoAux
variable = eth_yy
rank_two_tensor = thermal_eigenstrain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[eth_zz]
type = RankTwoAux
variable = eth_zz
rank_two_tensor = thermal_eigenstrain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fth_xx]
type = RankTwoAux
variable = fth_xx
rank_two_tensor = thermal_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fth_yy]
type = RankTwoAux
variable = fth_yy
rank_two_tensor = thermal_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[fth_zz]
type = RankTwoAux
variable = fth_zz
rank_two_tensor = thermal_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = thermal_eigenstrain
tan_mod_type = exact
maximum_substep_iteration = 5
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[thermal_eigenstrain]
type = ComputeCrystalPlasticityThermalEigenstrain
eigenstrain_name = thermal_eigenstrain
deformation_gradient_name = thermal_deformation_gradient
temperature = temperature
thermal_expansion_coefficients = '1e-05 2e-05 4e-05' # thermal expansion coefficients along three directions
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[eth_xx]
type = ElementAverageValue
variable = eth_xx
[]
[eth_yy]
type = ElementAverageValue
variable = eth_yy
[]
[eth_zz]
type = ElementAverageValue
variable = eth_zz
[]
[fth_xx]
type = ElementAverageValue
variable = fth_xx
[]
[fth_yy]
type = ElementAverageValue
variable = fth_yy
[]
[fth_zz]
type = ElementAverageValue
variable = fth_zz
[]
[temperature]
type = ElementAverageValue
variable = temperature
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 1e-4
end_time = 10
[]
[Outputs]
csv = true
[console]
type = Console
max_rows = 5
[]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/euler_angles/euler_angle_auxvar.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[euler_angle_1]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_2]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_3]
order = CONSTANT
family = MONOMIAL
[]
# Euler angles aux variable to check the correctness of value assignments
[check_euler_angle_1]
order = CONSTANT
family = MONOMIAL
[]
[check_euler_angle_2]
order = CONSTANT
family = MONOMIAL
[]
[check_euler_angle_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
[all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[]
[]
[]
[AuxKernels]
[euler_angle_1]
type = FunctionAux
variable = euler_angle_1
function = '10*t'
[]
[euler_angle_2]
type = FunctionAux
variable = euler_angle_2
function = '20*t'
[]
[euler_angle_3]
type = FunctionAux
variable = euler_angle_3
function = '30*t'
[]
# output Euler angles material property to check correctness of value assignment
[mat_euler_angle_1]
type = MaterialRealVectorValueAux
variable = check_euler_angle_1
property = 'Euler_angles'
component = 0
[]
[mat_euler_angle_2]
type = MaterialRealVectorValueAux
variable = check_euler_angle_2
property = 'Euler_angles'
component = 1
[]
[mat_euler_angle_3]
type = MaterialRealVectorValueAux
variable = check_euler_angle_3
property = 'Euler_angles'
component = 2
[]
[]
[BCs]
[Periodic]
[all]
variable = 'disp_x'
auto_direction = 'z'
[]
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = 'front'
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
euler_angle_variables = 'euler_angle_1 euler_angle_2 euler_angle_3'
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[check_euler_angle_1]
type = ElementAverageValue
variable = check_euler_angle_1
[]
[check_euler_angle_2]
type = ElementAverageValue
variable = check_euler_angle_2
[]
[check_euler_angle_3]
type = ElementAverageValue
variable = check_euler_angle_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu '
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 0.01
end_time = 0.5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/hcp_volumetric_eigenstrain.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[e_xtalpl_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_xtalpl_yy]
order = CONSTANT
family = MONOMIAL
[]
[ev_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_xtalpl_zz]
order = CONSTANT
family = MONOMIAL
[]
[fv_xx]
order = CONSTANT
family = MONOMIAL
[]
[fv_yy]
order = CONSTANT
family = MONOMIAL
[]
[fv_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_xx]
order = CONSTANT
family = MONOMIAL
[]
[fp_yy]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[f_xx]
order = CONSTANT
family = MONOMIAL
[]
[f_yy]
order = CONSTANT
family = MONOMIAL
[]
[f_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
additional_generate_output = 'stress_zz stress_xx stress_yy vonmises_stress l2norm_strain'
additional_material_output_order = FIRST
[]
[Functions]
[temperature_ramp]
type = ParsedFunction
expression = 'if(t<=1500.0, 600.0 + t/6.0, 850.0)'
[]
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = 'temperature_ramp'
execute_on = timestep_begin
[]
[e_xtalpl_xx]
type = RankTwoAux
variable = e_xtalpl_xx
rank_two_tensor = total_lagrangian_strain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_xtalpl_yy]
type = RankTwoAux
variable = e_xtalpl_yy
rank_two_tensor = total_lagrangian_strain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[ev_zz]
type = RankTwoAux
variable = ev_zz
rank_two_tensor = void_eigenstrain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_xtalpl_zz]
type = RankTwoAux
variable = e_xtalpl_zz
rank_two_tensor = total_lagrangian_strain
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[fv_xx]
type = RankTwoAux
variable = fv_xx
rank_two_tensor = volumetric_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fv_yy]
type = RankTwoAux
variable = fv_yy
rank_two_tensor = volumetric_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[fv_zz]
type = RankTwoAux
variable = fv_zz
rank_two_tensor = volumetric_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_xx]
type = RankTwoAux
variable = fp_xx
rank_two_tensor = plastic_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = plastic_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[f_xx]
type = RankTwoAux
variable = f_xx
rank_two_tensor = deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[f_yy]
type = RankTwoAux
variable = f_yy
rank_two_tensor = deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[f_zz]
type = RankTwoAux
variable = f_zz
rank_two_tensor = deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = void_eigenstrain
tan_mod_type = exact
line_search_method = CUT_HALF
use_line_search = true
maximum_substep_iteration = 10
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e3
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '9 22' #Knezevic et al MSEA 654 (2013)
effective_shear_modulus_per_mode = '4.7e2 4.7e2' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1.25e5 2.25e7' #from Beyerlein and Tome 2008 IJP
normalized_slip_activiation_energy_per_mode = '3.73e-3 3.2e-2' #from Beyerlein and Tome 2008 IJP
slip_energy_proportionality_factor_per_mode = '330 100' #from Beyerlein and Tome 2008 IJP
substructure_rate_coefficient_per_mode = '355 0.4' #from Capolungo et al MSEA (2009)
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0.2 0.2' #Estimated to match graph in Capolungo et al MSEA (2009), Figure 2
grain_size = 20.0e-3 #20 microns, Beyerlein and Tome IJP (2008)
[]
[void_eigenstrain]
type = ComputeCrystalPlasticityVolumetricEigenstrain
eigenstrain_name = void_eigenstrain
deformation_gradient_name = volumetric_deformation_gradient
mean_spherical_void_radius = void_radius
spherical_void_number_density = void_density
[]
[void_density]
type = ParsedMaterial
property_name = void_density
coupled_variables = temperature
expression = 'if(temperature<611.0, 0.0,
if(temperature<=835.0, 2.387e13 *(temperature - 611.0) / 1344.0, 0.0))' #1/mm^3, gives an eigenstrain of 1.0e-5 with radius=1.0e-6mm
# outputs = exodus
[]
[void_radius]
type = GenericConstantMaterial
prop_names = void_radius
prop_values = '1.0e-6' ##1 nm avg particle radius
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[e_xtalpl_xx]
type = ElementAverageValue
variable = e_xtalpl_xx
[]
[e_xtalpl_yy]
type = ElementAverageValue
variable = e_xtalpl_yy
[]
[ev_zz]
type = ElementAverageValue
variable = ev_zz
[]
[e_xtalpl_zz]
type = ElementAverageValue
variable = e_xtalpl_zz
[]
[fv_xx]
type = ElementAverageValue
variable = fv_xx
[]
[fv_yy]
type = ElementAverageValue
variable = fv_yy
[]
[fv_zz]
type = ElementAverageValue
variable = fv_zz
[]
[temperature]
type = ElementAverageValue
variable = temperature
[]
[fp_xx]
type = ElementAverageValue
variable = fp_xx
[]
[fp_yy]
type = ElementAverageValue
variable = fp_yy
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[f_xx]
type = ElementAverageValue
variable = f_xx
[]
[f_yy]
type = ElementAverageValue
variable = f_yy
[]
[f_zz]
type = ElementAverageValue
variable = f_zz
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 10.0
dtmin = 1e-4
# end_time = 10
num_steps = 10
[]
[Outputs]
csv = true
[console]
type = Console
# max_rows = 5
[]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_linesearch.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
rtol = 1e-6
abs_tol = 1e-8
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
use_line_search = true
min_line_search_step_size = 0.01
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.025
dtmax = 10.0
dtmin = 0.02
num_steps = 10
[]
[Outputs]
file_base = crysp_lsearch_out
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/exception.i)
[GlobalParams]
displacements = 'ux uy uz'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[rotout]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_increment
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = '0.1*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
maximum_substep_iteration = 1
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[slip_increment]
type = ElementAverageValue
variable = slip_increment
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.01
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/coplanar_twin_hardening.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = total_volume_fraction_twins
execute_on = timestep_end
[]
[twin_resistance_0]
type = MaterialStdVectorAux
variable = twin_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[twin_resistance_1]
type = MaterialStdVectorAux
variable = twin_resistance_1
property = slip_resistance
index = 1
execute_on = timestep_end
[]
[twin_resistance_2]
type = MaterialStdVectorAux
variable = twin_resistance_2
property = slip_resistance
index = 2
execute_on = timestep_end
[]
[twin_resistance_3]
type = MaterialStdVectorAux
variable = twin_resistance_3
property = slip_resistance
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_tau_0]
type = MaterialStdVectorAux
variable = twin_tau_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[twin_tau_1]
type = MaterialStdVectorAux
variable = twin_tau_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[twin_tau_2]
type = MaterialStdVectorAux
variable = twin_tau_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[twin_tau_3]
type = MaterialStdVectorAux
variable = twin_tau_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '-1.0e-3*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.08e5 6.034e4 6.034e4 1.08e5 6.03e4 1.08e5 2.86e4 2.86e4 2.86e4' #Tallon and Wolfenden. J. Phys. Chem. Solids (1979)
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_only_xtalpl'
tan_mod_type = exact
[]
[twin_only_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
number_slip_systems = 4
slip_sys_file_name = 'select_twin_systems_verify_hardening.txt'
initial_twin_lattice_friction = 6.0
non_coplanar_coefficient_twin_hardening = 0
non_coplanar_twin_hardening_exponent = 0
coplanar_coefficient_twin_hardening = 8e8
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[twin_resistance_0]
type = ElementAverageValue
variable = twin_resistance_0
[]
[twin_resistance_1]
type = ElementAverageValue
variable = twin_resistance_1
[]
[twin_resistance_2]
type = ElementAverageValue
variable = twin_resistance_2
[]
[twin_resistance_3]
type = ElementAverageValue
variable = twin_resistance_3
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 1e-6
dtmax = 10.0
num_steps = 4
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_read_slip_prop.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys_prop.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
tan_mod_type = exact
intvar_read_type = slip_sys_file
num_slip_sys_props = 1
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.05
dtmax = 10.0
dtmin = 0.05
num_steps = 10
[]
[Outputs]
file_base = crysp_read_slip_prop_out
exodus = true
[]
(modules/solid_mechanics/test/tests/elem_prop_read_user_object/prop_grain_read_3d.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'disp_x disp_y disp_z'
nx = 30
ny = 30
nz = 30
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[./disp_z]
block = 0
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.05*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'input_file.txt'
nprop = 4
read_type = grain
ngrain = 4
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = elastic_strain
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./elasticity_tensor_with_Euler]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y disp_z'
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 0
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.05
num_steps = 2
nl_abs_step_tol = 1e-10
[]
[Outputs]
file_base = prop_grain_read_3d_out
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/linesearch.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
[../]
[./uy]
[../]
[./uz]
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
maximum_substep_iteration = 200
use_line_search = true
min_line_search_step_size = 0.01
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'ux uy uz'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.02
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_representative_slip_systems.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_1]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_2]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_4]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_0]
type = MaterialStdVectorAux
variable = resolved_shear_stress_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[tau_1]
type = MaterialStdVectorAux
variable = resolved_shear_stress_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[tau_2]
type = MaterialStdVectorAux
variable = resolved_shear_stress_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[tau_3]
type = MaterialStdVectorAux
variable = resolved_shear_stress_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[tau_4]
type = MaterialStdVectorAux
variable = resolved_shear_stress_4
property = applied_shear_stress
index = 4
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.1*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
euler_angle_1 = 45
euler_angle_2 = 60
euler_angle_3 = 30
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 5
slip_sys_file_name = select_input_slip_sys_hcp.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0e3
slip_system_modes = 4
number_slip_systems_per_mode = '1 1 2 1'
lattice_friction_per_mode = '10 10 15 30'
effective_shear_modulus_per_mode = '47e3 47e3 47e3 47e3'
burgers_vector_per_mode = '2.934e-7 2.934e-7 2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '2e7 1e5 2e7 2e7'
normalized_slip_activiation_energy_per_mode = '3e-2 4e-3 3e-2 3e-2'
slip_energy_proportionality_factor_per_mode = '100 330 100 100'
substructure_rate_coefficient_per_mode = '100 400 1 1'
applied_strain_rate = 0.001
gamma_o = 1.0e-3
strain_rate_sensitivity_exponent = 0.05
Hall_Petch_like_constant_per_mode = '10 10 10 10'
grain_size = 20.0e-3 #20 microns,
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[tau_0]
type = ElementAverageValue
variable = resolved_shear_stress_0
[]
[tau_1]
type = ElementAverageValue
variable = resolved_shear_stress_1
[]
[tau_2]
type = ElementAverageValue
variable = resolved_shear_stress_2
[]
[tau_3]
type = ElementAverageValue
variable = resolved_shear_stress_3
[]
[tau_4]
type = ElementAverageValue
variable = resolved_shear_stress_4
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 0.01
dtmax = 0.1
end_time = 0.4
[]
[Outputs]
csv = true
[]
(modules/contact/examples/2d_indenter/indenter_rz_fine.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
[]
[Mesh]
patch_update_strategy = auto
patch_size = 2
partitioner = centroid
centroid_partitioner_direction = y
[simple_mesh]
type = FileMeshGenerator
file = indenter_rz_fine_bigsideset.e
[]
# For NodalVariableValue to work with distributed mesh
allow_renumbering = false
[]
[Functions]
[disp_y]
type = PiecewiseLinear
x = '0. 1.0 2.0 2.6 3.0'
y = '0. -4.5 -5.7 -5.7 -4.0'
[]
[]
[Variables]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[]
[AuxVariables]
[saved_x]
[]
[saved_y]
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
save_in = 'saved_x saved_y'
[]
[]
[BCs]
# Symmetries of the Problem
[symm_x_indenter]
type = DirichletBC
variable = disp_x
boundary = 5
value = 0.0
[]
[symm_x_material]
type = DirichletBC
variable = disp_x
boundary = 9
value = 0.0
[]
# Material should not fly away
[material_base_y]
type = DirichletBC
variable = disp_y
boundary = 8
value = 0.0
[]
# Drive indenter motion
[disp_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 1
function = disp_y
[]
[]
[Contact]
[contact]
secondary = 4
primary = 6
model = frictionless
# Investigate von Mises stress at the edge
correct_edge_dropping = true
formulation = mortar
c_normal = 1e+2
[]
[]
[UserObjects]
[slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 48
slip_sys_file_name = input_slip_sys_bcc48.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 48 0.0001 0.01'
uo_state_var_name = state_var_gss
slip_incr_tol = 10.0
block = 2
[]
[slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 48
uo_state_var_name = state_var_gss
block = 2
[]
[state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 48
groups = '0 24 48'
group_values = '900 1000' #120
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
block = 2
[]
[state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 48
hprops = '1.4 1000 1200 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
block = 2
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e7
poissons_ratio = 0.25
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[crysp]
type = FiniteStrainUObasedCP
block = 2
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
maximum_substep_iteration = 20
[]
[elasticity_tensor]
type = ComputeElasticityTensorCP
block = 2
C_ijkl = '265190 113650 113650 265190 113650 265190 75769 75769 75760'
fill_method = symmetric9
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -snes_linesearch_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu basic NONZERO 1e-15'
line_search = 'none'
automatic_scaling = true
nl_abs_tol = 2.0e-07
nl_rel_tol = 2.0e-07
l_max_its = 40
l_abs_tol = 1e-08
l_tol = 1e-08
start_time = 0.0
dt = 0.01
end_time = 3.0 # Executioner
[]
[Postprocessors]
[maxdisp]
type = NodalVariableValue
nodeid = 39
variable = disp_y
[]
[resid_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[]
[Outputs]
[out]
type = Exodus
elemental_as_nodal = true
[]
perf_graph = true
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.05
dtmax = 10.0
dtmin = 0.05
num_steps = 10
[]
[Outputs]
file_base = out
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/combined_twinning_slip_111tension.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_1]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_2]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_3]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_4]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_5]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_6]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_7]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_8]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_9]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_10]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_11]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_6]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_7]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_8]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_9]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_11]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = twin_total_volume_fraction_twins
execute_on = timestep_end
[]
[slip_increment_0]
type = MaterialStdVectorAux
variable = slip_increment_0
property = slip_increment
index = 0
execute_on = timestep_end
[]
[slip_increment_1]
type = MaterialStdVectorAux
variable = slip_increment_1
property = slip_increment
index = 1
execute_on = timestep_end
[]
[slip_increment_2]
type = MaterialStdVectorAux
variable = slip_increment_2
property = slip_increment
index = 2
execute_on = timestep_end
[]
[slip_increment_3]
type = MaterialStdVectorAux
variable = slip_increment_3
property = slip_increment
index = 3
execute_on = timestep_end
[]
[slip_increment_4]
type = MaterialStdVectorAux
variable = slip_increment_4
property = slip_increment
index = 4
execute_on = timestep_end
[]
[slip_increment_5]
type = MaterialStdVectorAux
variable = slip_increment_5
property = slip_increment
index = 5
execute_on = timestep_end
[]
[slip_increment_6]
type = MaterialStdVectorAux
variable = slip_increment_6
property = slip_increment
index = 6
execute_on = timestep_end
[]
[slip_increment_7]
type = MaterialStdVectorAux
variable = slip_increment_7
property = slip_increment
index = 7
execute_on = timestep_end
[]
[slip_increment_8]
type = MaterialStdVectorAux
variable = slip_increment_8
property = slip_increment
index = 8
execute_on = timestep_end
[]
[slip_increment_9]
type = MaterialStdVectorAux
variable = slip_increment_9
property = slip_increment
index = 9
execute_on = timestep_end
[]
[slip_increment_10]
type = MaterialStdVectorAux
variable = slip_increment_10
property = slip_increment
index = 10
execute_on = timestep_end
[]
[slip_increment_11]
type = MaterialStdVectorAux
variable = slip_increment_11
property = slip_increment
index = 11
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_5]
type = MaterialStdVectorAux
variable = twin_volume_fraction_5
property = twin_twin_system_volume_fraction
index = 5
execute_on = timestep_end
[]
[twin_volume_fraction_6]
type = MaterialStdVectorAux
variable = twin_volume_fraction_6
property = twin_twin_system_volume_fraction
index = 6
execute_on = timestep_end
[]
[twin_volume_fraction_7]
type = MaterialStdVectorAux
variable = twin_volume_fraction_7
property = twin_twin_system_volume_fraction
index = 7
execute_on = timestep_end
[]
[twin_volume_fraction_8]
type = MaterialStdVectorAux
variable = twin_volume_fraction_8
property = twin_twin_system_volume_fraction
index = 8
execute_on = timestep_end
[]
[twin_volume_fraction_9]
type = MaterialStdVectorAux
variable = twin_volume_fraction_9
property = twin_twin_system_volume_fraction
index = 9
execute_on = timestep_end
[]
[twin_volume_fraction_10]
type = MaterialStdVectorAux
variable = twin_volume_fraction_10
property = twin_twin_system_volume_fraction
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_11]
type = MaterialStdVectorAux
variable = twin_volume_fraction_11
property = twin_twin_system_volume_fraction
index = 11
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.02*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5' # roughly copper
fill_method = symmetric9
euler_angle_1 = 54.74
euler_angle_2 = 45.0
euler_angle_3 = 270.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_xtalpl slip_xtalpl'
tan_mod_type = exact
[]
[twin_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
base_name = twin
number_slip_systems = 12
slip_sys_file_name = 'fcc_input_twinning_systems.txt'
initial_twin_lattice_friction = 60.0
[]
[slip_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
total_twin_volume_fraction = 'twin_total_volume_fraction_twins'
[]
[]
[Postprocessors]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[slip_increment_0]
type = ElementAverageValue
variable = slip_increment_0
[]
[slip_increment_1]
type = ElementAverageValue
variable = slip_increment_1
[]
[slip_increment_2]
type = ElementAverageValue
variable = slip_increment_2
[]
[slip_increment_3]
type = ElementAverageValue
variable = slip_increment_3
[]
[slip_increment_4]
type = ElementAverageValue
variable = slip_increment_4
[]
[slip_increment_5]
type = ElementAverageValue
variable = slip_increment_5
[]
[slip_increment_6]
type = ElementAverageValue
variable = slip_increment_6
[]
[slip_increment_7]
type = ElementAverageValue
variable = slip_increment_7
[]
[slip_increment_8]
type = ElementAverageValue
variable = slip_increment_8
[]
[slip_increment_9]
type = ElementAverageValue
variable = slip_increment_9
[]
[slip_increment_10]
type = ElementAverageValue
variable = slip_increment_10
[]
[slip_increment_11]
type = ElementAverageValue
variable = slip_increment_11
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_5]
type = ElementAverageValue
variable = twin_volume_fraction_5
[]
[twin_volume_fraction_6]
type = ElementAverageValue
variable = twin_volume_fraction_6
[]
[twin_volume_fraction_7]
type = ElementAverageValue
variable = twin_volume_fraction_7
[]
[twin_volume_fraction_8]
type = ElementAverageValue
variable = twin_volume_fraction_8
[]
[twin_volume_fraction_9]
type = ElementAverageValue
variable = twin_volume_fraction_9
[]
[twin_volume_fraction_10]
type = ElementAverageValue
variable = twin_volume_fraction_10
[]
[twin_volume_fraction_11]
type = ElementAverageValue
variable = twin_volume_fraction_11
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.005
dtmin = 0.01
num_steps = 6
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/orthotropic_rotation_Cijkl.i)
# This test is designed to test the correct application of the Euler angle
# rotations to the elasticity tensor. The test uses values for the nine C_ijkl
# entries that correspond to the engineering notation placement:
# e.g. C11 = 11e3, c12 = 12e3, c13 = 13e3, c22 = 22e3 ..... c66 = 66e3
#
# A rotation of (0, 90, 0) is applied to the 1x1x1 cube, such that the values of
# c12 and c13 switch, c22 and c33 switch, and c55 and c66 switch. Postprocessors
# are used to verify this switch (made simple with the value convention above)
# and to verify that the unrotated components along the x-axis remain constant.
[Mesh]
type = GeneratedMesh
dim = 3
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[AuxVariables]
[./lage_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./lage_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./pk2_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./lage_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./c11]
order = CONSTANT
family = MONOMIAL
[../]
[./c12]
order = CONSTANT
family = MONOMIAL
[../]
[./c13]
order = CONSTANT
family = MONOMIAL
[../]
[./c22]
order = CONSTANT
family = MONOMIAL
[../]
[./c23]
order = CONSTANT
family = MONOMIAL
[../]
[./c33]
order = CONSTANT
family = MONOMIAL
[../]
[./c44]
order = CONSTANT
family = MONOMIAL
[../]
[./c55]
order = CONSTANT
family = MONOMIAL
[../]
[./c66]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Physics/SolidMechanics/QuasiStatic]
[./all]
strain = FINITE
add_variables = true
[../]
[]
[AuxKernels]
[./lage_xx]
type = RankTwoAux
rank_two_tensor = lage
variable = lage_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./lage_yy]
type = RankTwoAux
rank_two_tensor = lage
variable = lage_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./pk2_yy]
type = RankTwoAux
variable = pk2_yy
rank_two_tensor = pk2
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./lage_zz]
type = RankTwoAux
rank_two_tensor = lage
variable = lage_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./c11]
type = RankFourAux
variable = c11
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 0
index_l = 0
execute_on = timestep_end
[../]
[./c12]
type = RankFourAux
variable = c12
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 1
index_l = 1
execute_on = timestep_end
[../]
[./c13]
type = RankFourAux
variable = c13
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 2
index_l = 2
execute_on = timestep_end
[../]
[./c22]
type = RankFourAux
variable = c22
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 1
index_k = 1
index_l = 1
execute_on = timestep_end
[../]
[./c23]
type = RankFourAux
variable = c23
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 1
index_k = 2
index_l = 2
execute_on = timestep_end
[../]
[./c33]
type = RankFourAux
variable = c33
rank_four_tensor = elasticity_tensor
index_i = 2
index_j = 2
index_k = 2
index_l = 2
execute_on = timestep_end
[../]
[./c44]
type = RankFourAux
variable = c44
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 2
index_k = 1
index_l = 2
execute_on = timestep_end
[../]
[./c55]
type = RankFourAux
variable = c55
rank_four_tensor = elasticity_tensor
index_i = 2
index_j = 0
index_k = 2
index_l = 0
execute_on = timestep_end
[../]
[./c66]
type = RankFourAux
variable = c66
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 1
index_k = 0
index_l = 1
execute_on = timestep_end
[../]
[]
[BCs]
[./bottom]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./left]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./back]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./top]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8e3 5 8 60.8e3 9 12 60.8e3'
tan_mod_type = exact
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '11e3 12e3 13e3 22e3 23e3 33e3 44e3 55e3 66e3'
fill_method = symmetric9
euler_angle_1 = 0.0
euler_angle_2 = 90.0
euler_angle_3 = 0.0
[../]
[]
[Postprocessors]
[./lage_xx]
type = ElementAverageValue
variable = lage_xx
[../]
[./pk2_yy]
type = ElementAverageValue
variable = pk2_yy
[../]
[./lage_yy]
type = ElementAverageValue
variable = lage_yy
[../]
[./lage_zz]
type = ElementAverageValue
variable = lage_zz
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
[../]
[./c11]
type = ElementAverageValue
variable = c11
[../]
[./c12]
type = ElementAverageValue
variable = c12
[../]
[./c13]
type = ElementAverageValue
variable = c13
[../]
[./c22]
type = ElementAverageValue
variable = c22
[../]
[./c23]
type = ElementAverageValue
variable = c23
[../]
[./c33]
type = ElementAverageValue
variable = c33
[../]
[./c44]
type = ElementAverageValue
variable = c44
[../]
[./c55]
type = ElementAverageValue
variable = c55
[../]
[./c66]
type = ElementAverageValue
variable = c66
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
l_tol = 1e-3
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 1 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
dtmax = 0.1
dtmin = 1.0e-3
dt = 0.05
end_time = 0.5
[]
[Outputs]
exodus = false
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_aprismatic_capyramidal.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[AuxVariables]
[temperature]
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_xx]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_4]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_5]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_6]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental= true
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[temperature]
type = ConstantAux
variable = temperature
value= 300
[]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_xx]
type = RankTwoAux
variable = fp_xx
rank_two_tensor = plastic_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_3]
type = MaterialStdVectorAux
variable = resolved_shear_stress_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[tau_4]
type = MaterialStdVectorAux
variable = resolved_shear_stress_4
property = applied_shear_stress
index = 4
execute_on = timestep_end
[]
[tau_5]
type = MaterialStdVectorAux
variable = resolved_shear_stress_5
property = applied_shear_stress
index = 5
execute_on = timestep_end
[]
[tau_6]
type = MaterialStdVectorAux
variable = resolved_shear_stress_6
property = applied_shear_stress
index = 6
execute_on = timestep_end
[]
[slip_resistance_0]
type = MaterialStdVectorAux
variable = slip_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_resistance_3]
type = MaterialStdVectorAux
variable = slip_resistance_3
property = slip_resistance
index = 3
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
preset = true
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '98 224' #Knezevic et al MSEA 654 (2013)
effective_shear_modulus_per_mode = '4.7e4 4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1.25e5 2.25e7' #from Beyerlein and Tome 2008 IJP
normalized_slip_activiation_energy_per_mode = '3.73e-3 3.2e-2' #from Beyerlein and Tome 2008 IJP
slip_energy_proportionality_factor_per_mode = '330 100' #from Beyerlein and Tome 2008 IJP
substructure_rate_coefficient_per_mode = '355 0.4' #from Capolungo et al MSEA (2009)
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0.2 0.2' #Estimated to match graph in Capolungo et al MSEA (2009), Figure 2
grain_size = 20.0e-3 #20 microns, Beyerlein and Tome IJP (2008)
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_xx]
type = ElementAverageValue
variable = fp_xx
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[tau_3]
type = ElementAverageValue
variable = resolved_shear_stress_3
[]
[tau_4]
type = ElementAverageValue
variable = resolved_shear_stress_4
[]
[tau_5]
type = ElementAverageValue
variable = resolved_shear_stress_5
[]
[tau_6]
type = ElementAverageValue
variable = resolved_shear_stress_6
[]
[slip_resistance_0]
type = ElementAverageValue
variable = slip_resistance_0
[]
[slip_resistance_3]
type = ElementAverageValue
variable = slip_resistance_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.5
dtmin = 1.0e-2
dtmax = 10.0
end_time = 5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_aprismatic_active.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[center_node]
type = BoundingBoxNodeSetGenerator
input = cube
new_boundary = 'center_point'
top_right = '0.51 0.51 0'
bottom_left = '0.49 0.49 0'
[]
[back_edge_y]
type = BoundingBoxNodeSetGenerator
input = center_node
new_boundary = 'back_edge_y'
bottom_left = '0.9 0.5 0'
top_right = '1.1 0.5 0'
[]
[back_edge_x]
type = BoundingBoxNodeSetGenerator
input = back_edge_y
new_boundary = back_edge_x
bottom_left = '0.5 0.9 0'
top_right = '0.5 1.0 0'
[]
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_1]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_2]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_12]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_13]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_0]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_1]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_2]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_12]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_13]
order = CONSTANT
family = MONOMIAL
[]
[substructure_density]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_1]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_2]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_12]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_13]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_0]
type = MaterialStdVectorAux
variable = resolved_shear_stress_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[tau_1]
type = MaterialStdVectorAux
variable = resolved_shear_stress_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[tau_2]
type = MaterialStdVectorAux
variable = resolved_shear_stress_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[tau_12]
type = MaterialStdVectorAux
variable = resolved_shear_stress_12
property = applied_shear_stress
index = 12
execute_on = timestep_end
[]
[tau_13]
type = MaterialStdVectorAux
variable = resolved_shear_stress_13
property = applied_shear_stress
index = 13
execute_on = timestep_end
[]
[forest_dislocations_0]
type = MaterialStdVectorAux
variable = forest_dislocations_0
property = forest_dislocation_density
index = 0
execute_on = timestep_end
[]
[forest_dislocations_1]
type = MaterialStdVectorAux
variable = forest_dislocations_1
property = forest_dislocation_density
index = 1
execute_on = timestep_end
[]
[forest_dislocations_2]
type = MaterialStdVectorAux
variable = forest_dislocations_2
property = forest_dislocation_density
index = 2
execute_on = timestep_end
[]
[forest_dislocations_12]
type = MaterialStdVectorAux
variable = forest_dislocations_12
property = forest_dislocation_density
index = 12
execute_on = timestep_end
[]
[forest_dislocations_13]
type = MaterialStdVectorAux
variable = forest_dislocations_13
property = forest_dislocation_density
index = 13
execute_on = timestep_end
[]
[substructure_density]
type = MaterialRealAux
variable = substructure_density
property = total_substructure_density
execute_on = timestep_end
[]
[slip_resistance_0]
type = MaterialStdVectorAux
variable = slip_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_resistance_1]
type = MaterialStdVectorAux
variable = slip_resistance_1
property = slip_resistance
index = 1
execute_on = timestep_end
[]
[slip_resistance_2]
type = MaterialStdVectorAux
variable = slip_resistance_2
property = slip_resistance
index = 2
execute_on = timestep_end
[]
[slip_resistance_12]
type = MaterialStdVectorAux
variable = slip_resistance_12
property = slip_resistance
index = 12
execute_on = timestep_end
[]
[slip_resistance_13]
type = MaterialStdVectorAux
variable = slip_resistance_13
property = slip_resistance
index = 13
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'center_point back_edge_y'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'center_point back_edge_x'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
euler_angle_1 = 164.5
euler_angle_2 = 90.0
euler_angle_3 = 15.3
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '0.5 5'
effective_shear_modulus_per_mode = '4.7e4 4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1e5 2e7'
normalized_slip_activiation_energy_per_mode = '4e-3 3e-2'
slip_energy_proportionality_factor_per_mode = '330 100'
substructure_rate_coefficient_per_mode = '400 100'
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '2e-3 2e-3' #minimize impact
grain_size = 20.0e-3 #20 microns
[]
[]
[Postprocessors]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[tau_0]
type = ElementAverageValue
variable = resolved_shear_stress_0
[]
[tau_1]
type = ElementAverageValue
variable = resolved_shear_stress_1
[]
[tau_2]
type = ElementAverageValue
variable = resolved_shear_stress_2
[]
[tau_12]
type = ElementAverageValue
variable = resolved_shear_stress_12
[]
[tau_13]
type = ElementAverageValue
variable = resolved_shear_stress_13
[]
[forest_dislocation_0]
type = ElementAverageValue
variable = forest_dislocations_0
[]
[forest_dislocation_1]
type = ElementAverageValue
variable = forest_dislocations_1
[]
[forest_dislocation_2]
type = ElementAverageValue
variable = forest_dislocations_2
[]
[forest_dislocation_12]
type = ElementAverageValue
variable = forest_dislocations_12
[]
[forest_dislocation_13]
type = ElementAverageValue
variable = forest_dislocations_13
[]
[substructure_density]
type = ElementAverageValue
variable = substructure_density
[]
[slip_resistance_0]
type = ElementAverageValue
variable = slip_resistance_0
[]
[slip_resistance_1]
type = ElementAverageValue
variable = slip_resistance_1
[]
[slip_resistance_2]
type = ElementAverageValue
variable = slip_resistance_2
[]
[slip_resistance_12]
type = ElementAverageValue
variable = slip_resistance_12
[]
[slip_resistance_13]
type = ElementAverageValue
variable = slip_resistance_13
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
nl_max_its = 20
l_max_its = 50
dt = 0.005
dtmin = 1.0e-4
dtmax = 0.1
end_time = 0.09
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/euler_angles/euler_angle_conflict.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
xmax = 4
nx = 4
elem_type = HEX8
[]
[AuxVariables]
[euler_angle_1]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_2]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_3]
order = CONSTANT
family = MONOMIAL
[]
# Euler angles aux variable to check the correctness of value assignments
[check_euler_angle_1]
order = CONSTANT
family = MONOMIAL
[]
[check_euler_angle_2]
order = CONSTANT
family = MONOMIAL
[]
[check_euler_angle_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
[all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[]
[]
[]
[AuxKernels]
[euler_angle_1]
type = FunctionAux
variable = euler_angle_1
function = '10*t'
[]
[euler_angle_2]
type = FunctionAux
variable = euler_angle_2
function = '20*t'
[]
[euler_angle_3]
type = FunctionAux
variable = euler_angle_3
function = '30*t'
[]
# output Euler angles material property to check correctness of value assignment
[mat_euler_angle_1]
type = MaterialRealVectorValueAux
variable = check_euler_angle_1
property = 'Euler_angles'
component = 0
[]
[mat_euler_angle_2]
type = MaterialRealVectorValueAux
variable = check_euler_angle_2
property = 'Euler_angles'
component = 1
[]
[mat_euler_angle_3]
type = MaterialRealVectorValueAux
variable = check_euler_angle_3
property = 'Euler_angles'
component = 2
[]
[]
[BCs]
[Periodic]
[all]
variable = 'disp_x'
auto_direction = 'z'
[]
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = 'front'
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
euler_angle_variables = 'euler_angle_1 euler_angle_2 euler_angle_3'
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[UserObjects]
[prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = element
[]
[]
[Postprocessors]
[check_euler_angle_1]
type = ElementAverageValue
variable = check_euler_angle_1
[]
[check_euler_angle_2]
type = ElementAverageValue
variable = check_euler_angle_2
[]
[check_euler_angle_3]
type = ElementAverageValue
variable = check_euler_angle_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu '
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 0.01
end_time = 0.5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/only_twinning_fcc.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_6]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_7]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_8]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_9]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_11]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_10]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = total_volume_fraction_twins
execute_on = timestep_end
[]
[twin_resistance_4]
type = MaterialStdVectorAux
variable = twin_resistance_4
property = slip_resistance
index = 4
execute_on = timestep_end
[]
[twin_resistance_10]
type = MaterialStdVectorAux
variable = twin_resistance_10
property = slip_resistance
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_5]
type = MaterialStdVectorAux
variable = twin_volume_fraction_5
property = twin_system_volume_fraction
index = 5
execute_on = timestep_end
[]
[twin_volume_fraction_6]
type = MaterialStdVectorAux
variable = twin_volume_fraction_6
property = twin_system_volume_fraction
index = 6
execute_on = timestep_end
[]
[twin_volume_fraction_7]
type = MaterialStdVectorAux
variable = twin_volume_fraction_7
property = twin_system_volume_fraction
index = 7
execute_on = timestep_end
[]
[twin_volume_fraction_8]
type = MaterialStdVectorAux
variable = twin_volume_fraction_8
property = twin_system_volume_fraction
index = 8
execute_on = timestep_end
[]
[twin_volume_fraction_9]
type = MaterialStdVectorAux
variable = twin_volume_fraction_9
property = twin_system_volume_fraction
index = 9
execute_on = timestep_end
[]
[twin_volume_fraction_10]
type = MaterialStdVectorAux
variable = twin_volume_fraction_10
property = twin_system_volume_fraction
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_11]
type = MaterialStdVectorAux
variable = twin_volume_fraction_11
property = twin_system_volume_fraction
index = 11
execute_on = timestep_end
[]
[twin_tau_4]
type = MaterialStdVectorAux
variable = twin_tau_4
property = applied_shear_stress
index = 4
execute_on = timestep_end
[]
[twin_tau_10]
type = MaterialStdVectorAux
variable = twin_tau_10
property = applied_shear_stress
index = 10
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '5.0e-4*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.08e5 6.034e4 6.034e4 1.08e5 6.03e4 1.08e5 2.86e4 2.86e4 2.86e4' #Tallon and Wolfenden. J. Phys. Chem. Solids (1979)
fill_method = symmetric9
euler_angle_1 = 54.74
euler_angle_2 = 45.0
euler_angle_3 = 270.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_only_xtalpl'
tan_mod_type = exact
maximum_substep_iteration = 2
[]
[twin_only_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = 'fcc_input_twinning_systems.txt'
initial_twin_lattice_friction = 3.0
non_coplanar_coefficient_twin_hardening = 8e5
coplanar_coefficient_twin_hardening = 8e4
[]
[]
[Postprocessors]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[twin_resistance_4]
type = ElementAverageValue
variable = twin_resistance_4
[]
[twin_resistance_10]
type = ElementAverageValue
variable = twin_resistance_10
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_5]
type = ElementAverageValue
variable = twin_volume_fraction_5
[]
[twin_volume_fraction_6]
type = ElementAverageValue
variable = twin_volume_fraction_6
[]
[twin_volume_fraction_7]
type = ElementAverageValue
variable = twin_volume_fraction_7
[]
[twin_volume_fraction_8]
type = ElementAverageValue
variable = twin_volume_fraction_8
[]
[twin_volume_fraction_9]
type = ElementAverageValue
variable = twin_volume_fraction_9
[]
[twin_volume_fraction_10]
type = ElementAverageValue
variable = twin_volume_fraction_10
[]
[twin_volume_fraction_11]
type = ElementAverageValue
variable = twin_volume_fraction_11
[]
[twin_tau_4]
type = ElementAverageValue
variable = twin_tau_4
[]
[twin_tau_10]
type = ElementAverageValue
variable = twin_tau_10
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.025
dtmin = 0.0125
num_steps = 8
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/multiple_eigenstrains_test.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[f1_xx]
order = CONSTANT
family = MONOMIAL
[]
[f1_yy]
order = CONSTANT
family = MONOMIAL
[]
[f1_zz]
order = CONSTANT
family = MONOMIAL
[]
[f2_xx]
order = CONSTANT
family = MONOMIAL
[]
[f2_yy]
order = CONSTANT
family = MONOMIAL
[]
[f2_zz]
order = CONSTANT
family = MONOMIAL
[]
[feig_xx]
order = CONSTANT
family = MONOMIAL
[]
[feig_yy]
order = CONSTANT
family = MONOMIAL
[]
[feig_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = '300+400*t' # temperature increases at a constant rate
execute_on = timestep_begin
[]
[f1_xx]
type = RankTwoAux
variable = f1_xx
rank_two_tensor = thermal_deformation_gradient_1
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[f1_yy]
type = RankTwoAux
variable = f1_yy
rank_two_tensor = thermal_deformation_gradient_1
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[f1_zz]
type = RankTwoAux
variable = f1_zz
rank_two_tensor = thermal_deformation_gradient_1
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[f2_xx]
type = RankTwoAux
variable = f2_xx
rank_two_tensor = thermal_deformation_gradient_2
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[f2_yy]
type = RankTwoAux
variable = f2_yy
rank_two_tensor = thermal_deformation_gradient_2
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[f2_zz]
type = RankTwoAux
variable = f2_zz
rank_two_tensor = thermal_deformation_gradient_2
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[feig_xx]
type = RankTwoAux
variable = feig_xx
rank_two_tensor = eigenstrain_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[feig_yy]
type = RankTwoAux
variable = feig_yy
rank_two_tensor = eigenstrain_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[feig_zz]
type = RankTwoAux
variable = feig_zz
rank_two_tensor = eigenstrain_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = "thermal_eigenstrain_1 thermal_eigenstrain_2"
tan_mod_type = exact
maximum_substep_iteration = 5
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[thermal_eigenstrain_1]
type = ComputeCrystalPlasticityThermalEigenstrain
eigenstrain_name = thermal_eigenstrain_1
deformation_gradient_name = thermal_deformation_gradient_1
temperature = temperature
thermal_expansion_coefficients = '1e-05 2e-05 3e-05' # thermal expansion coefficients along three directions
[]
[thermal_eigenstrain_2]
type = ComputeCrystalPlasticityThermalEigenstrain
eigenstrain_name = thermal_eigenstrain_2
deformation_gradient_name = thermal_deformation_gradient_2
temperature = temperature
thermal_expansion_coefficients = '2e-05 3e-05 4e-05' # thermal expansion coefficients along three directions
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[f1_xx]
type = ElementAverageValue
variable = f1_xx
[]
[f1_yy]
type = ElementAverageValue
variable = f1_yy
[]
[f1_zz]
type = ElementAverageValue
variable = f1_zz
[]
[f2_xx]
type = ElementAverageValue
variable = f2_xx
[]
[f2_yy]
type = ElementAverageValue
variable = f2_yy
[]
[f2_zz]
type = ElementAverageValue
variable = f2_zz
[]
[feig_xx]
type = ElementAverageValue
variable = feig_xx
[]
[feig_yy]
type = ElementAverageValue
variable = feig_yy
[]
[feig_zz]
type = ElementAverageValue
variable = feig_zz
[]
[temperature]
type = ElementAverageValue
variable = temperature
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 1e-4
end_time = 10
[]
[Outputs]
csv = true
[console]
type = Console
max_rows = 5
[]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/orthotropic_rotation_Cijkl.i)
# This test is designed to test the correct application of the Euler angle
# rotations to the elasticity tensor. The test uses values for the nine C_ijkl
# entries that correspond to the engineering notation placement:
# e.g. C11 = 11e3, c12 = 12e3, c13 = 13e3, c22 = 22e3 ..... c66 = 66e3
#
# A rotation of (0, 90, 0) is applied to the 1x1x1 cube, such that the values of
# c12 and c13 switch, c22 and c33 switch, and c55 and c66 switch. Postprocessors
# are used to verify this switch (made simple with the value convention above)
# and to verify that the unrotated components along the x-axis remain constant.
[Mesh]
type = GeneratedMesh
dim = 3
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[AuxVariables]
[lage_xx]
order = CONSTANT
family = MONOMIAL
[]
[lage_yy]
order = CONSTANT
family = MONOMIAL
[]
[pk2_yy]
order = CONSTANT
family = MONOMIAL
[]
[lage_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_yy]
order = CONSTANT
family = MONOMIAL
[]
[c11]
order = CONSTANT
family = MONOMIAL
[]
[c12]
order = CONSTANT
family = MONOMIAL
[]
[c13]
order = CONSTANT
family = MONOMIAL
[]
[c22]
order = CONSTANT
family = MONOMIAL
[]
[c23]
order = CONSTANT
family = MONOMIAL
[]
[c33]
order = CONSTANT
family = MONOMIAL
[]
[c44]
order = CONSTANT
family = MONOMIAL
[]
[c55]
order = CONSTANT
family = MONOMIAL
[]
[c66]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[tdisp]
type = ParsedFunction
expression = 0.01*t
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
add_variables = true
[]
[]
[AuxKernels]
[lage_xx]
type = RankTwoAux
rank_two_tensor = total_lagrangian_strain
variable = lage_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[lage_yy]
type = RankTwoAux
rank_two_tensor = total_lagrangian_strain
variable = lage_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[pk2_yy]
type = RankTwoAux
variable = pk2_yy
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[lage_zz]
type = RankTwoAux
rank_two_tensor = total_lagrangian_strain
variable = lage_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = plastic_deformation_gradient
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[c11]
type = RankFourAux
variable = c11
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 0
index_l = 0
execute_on = timestep_end
[]
[c12]
type = RankFourAux
variable = c12
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 1
index_l = 1
execute_on = timestep_end
[]
[c13]
type = RankFourAux
variable = c13
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 2
index_l = 2
execute_on = timestep_end
[]
[c22]
type = RankFourAux
variable = c22
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 1
index_k = 1
index_l = 1
execute_on = timestep_end
[]
[c23]
type = RankFourAux
variable = c23
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 1
index_k = 2
index_l = 2
execute_on = timestep_end
[]
[c33]
type = RankFourAux
variable = c33
rank_four_tensor = elasticity_tensor
index_i = 2
index_j = 2
index_k = 2
index_l = 2
execute_on = timestep_end
[]
[c44]
type = RankFourAux
variable = c44
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 2
index_k = 1
index_l = 2
execute_on = timestep_end
[]
[c55]
type = RankFourAux
variable = c55
rank_four_tensor = elasticity_tensor
index_i = 2
index_j = 0
index_k = 2
index_l = 0
execute_on = timestep_end
[]
[c66]
type = RankFourAux
variable = c66
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 1
index_k = 0
index_l = 1
execute_on = timestep_end
[]
[]
[BCs]
[bottom]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[left]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[back]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[top]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '11e3 12e3 13e3 22e3 23e3 33e3 44e3 55e3 66e3'
fill_method = symmetric9
euler_angle_1 = 0.0
euler_angle_2 = 45.0
euler_angle_3 = 45.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[lage_xx]
type = ElementAverageValue
variable = lage_xx
[]
[pk2_yy]
type = ElementAverageValue
variable = pk2_yy
[]
[lage_yy]
type = ElementAverageValue
variable = lage_yy
[]
[lage_zz]
type = ElementAverageValue
variable = lage_zz
[]
[fp_yy]
type = ElementAverageValue
variable = fp_yy
[]
[c11]
type = ElementAverageValue
variable = c11
[]
[c12]
type = ElementAverageValue
variable = c12
[]
[c13]
type = ElementAverageValue
variable = c13
[]
[c22]
type = ElementAverageValue
variable = c22
[]
[c23]
type = ElementAverageValue
variable = c23
[]
[c33]
type = ElementAverageValue
variable = c33
[]
[c44]
type = ElementAverageValue
variable = c44
[]
[c55]
type = ElementAverageValue
variable = c55
[]
[c66]
type = ElementAverageValue
variable = c66
[]
[]
[Executioner]
type = Transient
solve_type = PJFNK
l_tol = 1e-3
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 1 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
dtmax = 0.1
dtmin = 1.0e-3
dt = 0.05
end_time = 0.5
[]
[Outputs]
exodus = false
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_save_euler.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 2
ny = 2
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[]
[GlobalParams]
volumetric_locking_correction = true
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./euler1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./euler2]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./euler3]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = element
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = lage
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[./euler1]
type = MaterialRealVectorValueAux
variable = euler1
property = Euler_angles
component = 0
execute_on = timestep_end
block = 0
[../]
[./euler2]
type = MaterialRealVectorValueAux
variable = euler2
property = Euler_angles
component = 1
execute_on = timestep_end
block = 0
[../]
[./euler3]
type = MaterialRealVectorValueAux
variable = euler3
property = Euler_angles
component = 2
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.01
dtmax = 10.0
dtmin = 0.01
num_steps = 10
[]
[Outputs]
file_base = crysp_save_euler_out
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/cp_slip_rate_integ/crysp_substep.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[./disp_z]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCPSlipRateRes
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.01 5 8 0.001 0.01 9 12 0.001 0.01'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
slip_incr_tol = 1
maximum_substep_iteration = 8
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y disp_z'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.2
dtmax = 10.0
dtmin = 0.05
end_time = 1
[]
[Outputs]
file_base = crysp_substep_out
exodus = true
print_linear_residuals = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/combined_twinning_slip_error.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_1]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_2]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_3]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_4]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_5]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_6]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_7]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_8]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_9]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_10]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_11]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_6]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_7]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_8]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_9]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_11]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = twin_total_volume_fraction_twins
execute_on = timestep_end
[]
[slip_increment_0]
type = MaterialStdVectorAux
variable = slip_increment_0
property = slip_increment
index = 0
execute_on = timestep_end
[]
[slip_increment_1]
type = MaterialStdVectorAux
variable = slip_increment_1
property = slip_increment
index = 1
execute_on = timestep_end
[]
[slip_increment_2]
type = MaterialStdVectorAux
variable = slip_increment_2
property = slip_increment
index = 2
execute_on = timestep_end
[]
[slip_increment_3]
type = MaterialStdVectorAux
variable = slip_increment_3
property = slip_increment
index = 3
execute_on = timestep_end
[]
[slip_increment_4]
type = MaterialStdVectorAux
variable = slip_increment_4
property = slip_increment
index = 4
execute_on = timestep_end
[]
[slip_increment_5]
type = MaterialStdVectorAux
variable = slip_increment_5
property = slip_increment
index = 5
execute_on = timestep_end
[]
[slip_increment_6]
type = MaterialStdVectorAux
variable = slip_increment_6
property = slip_increment
index = 6
execute_on = timestep_end
[]
[slip_increment_7]
type = MaterialStdVectorAux
variable = slip_increment_7
property = slip_increment
index = 7
execute_on = timestep_end
[]
[slip_increment_8]
type = MaterialStdVectorAux
variable = slip_increment_8
property = slip_increment
index = 8
execute_on = timestep_end
[]
[slip_increment_9]
type = MaterialStdVectorAux
variable = slip_increment_9
property = slip_increment
index = 9
execute_on = timestep_end
[]
[slip_increment_10]
type = MaterialStdVectorAux
variable = slip_increment_10
property = slip_increment
index = 10
execute_on = timestep_end
[]
[slip_increment_11]
type = MaterialStdVectorAux
variable = slip_increment_11
property = slip_increment
index = 11
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_5]
type = MaterialStdVectorAux
variable = twin_volume_fraction_5
property = twin_twin_system_volume_fraction
index = 5
execute_on = timestep_end
[]
[twin_volume_fraction_6]
type = MaterialStdVectorAux
variable = twin_volume_fraction_6
property = twin_twin_system_volume_fraction
index = 6
execute_on = timestep_end
[]
[twin_volume_fraction_7]
type = MaterialStdVectorAux
variable = twin_volume_fraction_7
property = twin_twin_system_volume_fraction
index = 7
execute_on = timestep_end
[]
[twin_volume_fraction_8]
type = MaterialStdVectorAux
variable = twin_volume_fraction_8
property = twin_twin_system_volume_fraction
index = 8
execute_on = timestep_end
[]
[twin_volume_fraction_9]
type = MaterialStdVectorAux
variable = twin_volume_fraction_9
property = twin_twin_system_volume_fraction
index = 9
execute_on = timestep_end
[]
[twin_volume_fraction_10]
type = MaterialStdVectorAux
variable = twin_volume_fraction_10
property = twin_twin_system_volume_fraction
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_11]
type = MaterialStdVectorAux
variable = twin_volume_fraction_11
property = twin_twin_system_volume_fraction
index = 11
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.02*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5' # roughly copper
fill_method = symmetric9
euler_angle_1 = 54.74
euler_angle_2 = 45.0
euler_angle_3 = 270.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_xtalpl slip_xtalpl'
tan_mod_type = exact
[]
[twin_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
base_name = twin
number_slip_systems = 12
slip_sys_file_name = 'fcc_input_twinning_systems.txt'
initial_twin_lattice_friction = 60.0
[]
[slip_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
total_twin_volume_fraction = 'total_volume_fraction_twins'
[]
[]
[Postprocessors]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[slip_increment_0]
type = ElementAverageValue
variable = slip_increment_0
[]
[slip_increment_1]
type = ElementAverageValue
variable = slip_increment_1
[]
[slip_increment_2]
type = ElementAverageValue
variable = slip_increment_2
[]
[slip_increment_3]
type = ElementAverageValue
variable = slip_increment_3
[]
[slip_increment_4]
type = ElementAverageValue
variable = slip_increment_4
[]
[slip_increment_5]
type = ElementAverageValue
variable = slip_increment_5
[]
[slip_increment_6]
type = ElementAverageValue
variable = slip_increment_6
[]
[slip_increment_7]
type = ElementAverageValue
variable = slip_increment_7
[]
[slip_increment_8]
type = ElementAverageValue
variable = slip_increment_8
[]
[slip_increment_9]
type = ElementAverageValue
variable = slip_increment_9
[]
[slip_increment_10]
type = ElementAverageValue
variable = slip_increment_10
[]
[slip_increment_11]
type = ElementAverageValue
variable = slip_increment_11
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_5]
type = ElementAverageValue
variable = twin_volume_fraction_5
[]
[twin_volume_fraction_6]
type = ElementAverageValue
variable = twin_volume_fraction_6
[]
[twin_volume_fraction_7]
type = ElementAverageValue
variable = twin_volume_fraction_7
[]
[twin_volume_fraction_8]
type = ElementAverageValue
variable = twin_volume_fraction_8
[]
[twin_volume_fraction_9]
type = ElementAverageValue
variable = twin_volume_fraction_9
[]
[twin_volume_fraction_10]
type = ElementAverageValue
variable = twin_volume_fraction_10
[]
[twin_volume_fraction_11]
type = ElementAverageValue
variable = twin_volume_fraction_11
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.005
dtmin = 0.01
num_steps = 6
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_capyramidal_active.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[center_node]
type = BoundingBoxNodeSetGenerator
input = cube
new_boundary = 'center_point'
top_right = '0.51 0.51 0'
bottom_left = '0.49 0.49 0'
[]
[back_edge_y]
type = BoundingBoxNodeSetGenerator
input = center_node
new_boundary = 'back_edge_y'
bottom_left = '0.9 0.5 0'
top_right = '1.1 0.5 0'
[]
[back_edge_x]
type = BoundingBoxNodeSetGenerator
input = back_edge_y
new_boundary = back_edge_x
bottom_left = '0.5 0.9 0'
top_right = '0.5 1.0 0'
[]
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_4]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_8]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_9]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_13]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_14]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_0]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_3]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_4]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_8]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_9]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_13]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_14]
order = CONSTANT
family = MONOMIAL
[]
[substructure_density]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_0]
type = MaterialStdVectorAux
variable = resolved_shear_stress_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[tau_3]
type = MaterialStdVectorAux
variable = resolved_shear_stress_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[tau_4]
type = MaterialStdVectorAux
variable = resolved_shear_stress_4
property = applied_shear_stress
index = 4
execute_on = timestep_end
[]
[tau_8]
type = MaterialStdVectorAux
variable = resolved_shear_stress_8
property = applied_shear_stress
index = 8
execute_on = timestep_end
[]
[tau_9]
type = MaterialStdVectorAux
variable = resolved_shear_stress_9
property = applied_shear_stress
index = 9
execute_on = timestep_end
[]
[tau_13]
type = MaterialStdVectorAux
variable = resolved_shear_stress_13
property = applied_shear_stress
index = 13
execute_on = timestep_end
[]
[tau_14]
type = MaterialStdVectorAux
variable = resolved_shear_stress_14
property = applied_shear_stress
index = 14
execute_on = timestep_end
[]
[forest_dislocations_0]
type = MaterialStdVectorAux
variable = forest_dislocations_0
property = forest_dislocation_density
index = 0
execute_on = timestep_end
[]
[forest_dislocations_3]
type = MaterialStdVectorAux
variable = forest_dislocations_3
property = forest_dislocation_density
index = 3
execute_on = timestep_end
[]
[forest_dislocations_4]
type = MaterialStdVectorAux
variable = forest_dislocations_4
property = forest_dislocation_density
index = 4
execute_on = timestep_end
[]
[forest_dislocations_8]
type = MaterialStdVectorAux
variable = forest_dislocations_8
property = forest_dislocation_density
index = 8
execute_on = timestep_end
[]
[forest_dislocations_9]
type = MaterialStdVectorAux
variable = forest_dislocations_9
property = forest_dislocation_density
index = 9
execute_on = timestep_end
[]
[forest_dislocations_13]
type = MaterialStdVectorAux
variable = forest_dislocations_13
property = forest_dislocation_density
index = 13
execute_on = timestep_end
[]
[forest_dislocations_14]
type = MaterialStdVectorAux
variable = forest_dislocations_14
property = forest_dislocation_density
index = 14
execute_on = timestep_end
[]
[substructure_density]
type = MaterialRealAux
variable = substructure_density
property = total_substructure_density
execute_on = timestep_end
[]
[slip_resistance_0]
type = MaterialStdVectorAux
variable = slip_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_resistance_3]
type = MaterialStdVectorAux
variable = slip_resistance_3
property = slip_resistance
index = 3
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'center_point back_edge_y'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'center_point back_edge_x'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
euler_angle_1 = 68
euler_angle_2 = 14
euler_angle_3 = -53
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e4
initial_substructure_density = 5.0e2
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '1 1.5'
effective_shear_modulus_per_mode = '4.7e4 4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1e5 2e7'
normalized_slip_activiation_energy_per_mode = '4e-3 3e-2'
slip_energy_proportionality_factor_per_mode = '330 100'
substructure_rate_coefficient_per_mode = '400 100'
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0 0' #minimize impact
grain_size = 20.0e-3 #20 microns
[]
[]
[Postprocessors]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[tau_0]
type = ElementAverageValue
variable = resolved_shear_stress_0
[]
[tau_3]
type = ElementAverageValue
variable = resolved_shear_stress_3
[]
[tau_4]
type = ElementAverageValue
variable = resolved_shear_stress_4
[]
[tau_8]
type = ElementAverageValue
variable = resolved_shear_stress_8
[]
[tau_9]
type = ElementAverageValue
variable = resolved_shear_stress_9
[]
[tau_13]
type = ElementAverageValue
variable = resolved_shear_stress_13
[]
[tau_14]
type = ElementAverageValue
variable = resolved_shear_stress_14
[]
[forest_dislocation_0]
type = ElementAverageValue
variable = forest_dislocations_0
[]
[forest_dislocation_3]
type = ElementAverageValue
variable = forest_dislocations_3
[]
[forest_dislocation_4]
type = ElementAverageValue
variable = forest_dislocations_4
[]
[forest_dislocation_8]
type = ElementAverageValue
variable = forest_dislocations_8
[]
[forest_dislocation_9]
type = ElementAverageValue
variable = forest_dislocations_9
[]
[forest_dislocation_13]
type = ElementAverageValue
variable = forest_dislocations_13
[]
[forest_dislocation_14]
type = ElementAverageValue
variable = forest_dislocations_14
[]
[substructure_density]
type = ElementAverageValue
variable = substructure_density
[]
[slip_resistance_0]
type = ElementAverageValue
variable = slip_resistance_0
[]
[slip_resistance_3]
type = ElementAverageValue
variable = slip_resistance_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.015
dtmin = 1.0e-4
dtmax = 0.1
end_time = 0.15
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/user_object_011orientation.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[./pk2]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./lagrangian_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./lagrangian_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[./slip_increment]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[./pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = pk2
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./lagrangian_strain_zz]
type = RankTwoAux
variable = lagrangian_strain_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./lagrangian_strain_yy]
type = RankTwoAux
rank_two_tensor = lage
variable = lagrangian_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_rate_gss
index = 0
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
euler_angle_1 = 120.0
euler_angle_2 = 125.264
euler_angle_3 = 45.0
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./pk2]
type = ElementAverageValue
variable = pk2
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
[../]
[./lagrangian_strain_yy]
type = ElementAverageValue
variable = lagrangian_strain_yy
[../]
[./lagrangian_strain_zz]
type = ElementAverageValue
variable = lagrangian_strain_zz
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[./slip_increment]
type = ElementAverageValue
variable = slip_increment
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
dtmin = 0.05
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_user_object.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 2
ny = 2
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[]
[GlobalParams]
volumetric_locking_correction=true
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = element
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = lage
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.01
dtmax = 10.0
dtmin = 0.01
num_steps = 10
[]
[Outputs]
file_base = crysp_user_object_out
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/elem_prop_read_user_object/prop_grain_read.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 10
ny = 10
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[]
[GlobalParams]
volumetric_locking_correction=true
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.05*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'input_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 4
read_type = voronoi
nvoronoi = 3
use_random_voronoi = true
rand_seed = 25346
rve_type = periodic
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = elastic_strain
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./elasticity_tensor_with_Euler]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 0.176e5 0.176e5 1.684e5 0.176e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y'
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 0
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.05
num_steps = 1
nl_abs_step_tol = 1e-10
[]
[Outputs]
file_base = prop_grain_read_out
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_no_substructure.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[substructure_density]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_3]
type = MaterialStdVectorAux
variable = resolved_shear_stress_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[slip_resistance_3]
type = MaterialStdVectorAux
variable = slip_resistance_3
property = slip_resistance
index = 3
execute_on = timestep_end
[]
[substructure_density]
type = MaterialRealAux
variable = substructure_density
property = total_substructure_density
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
preset = true
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7'
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0 #artifically low for specific test
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '100 200'
effective_shear_modulus_per_mode = '5e4 5e4'
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1e5 2e7'
normalized_slip_activiation_energy_per_mode = '4e-3 3e-2'
slip_energy_proportionality_factor_per_mode = '300 100'
substructure_rate_coefficient_per_mode = '-355 -0.4' #artifical, non-physical values for testing purposes
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '1 1'
grain_size = 20.0e-3 #20 microns
[]
[]
[Postprocessors]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[tau_3]
type = ElementAverageValue
variable = resolved_shear_stress_3
[]
[slip_resistance_3]
type = ElementAverageValue
variable = slip_resistance_3
[]
[substructure_density]
type = ElementAverageValue
variable = substructure_density
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.5
dtmin = 1.0e-2
dtmax = 10.0
end_time = 2.5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/orthotropic_rotation_Cijkl.i)
# This test is designed to test the correct application of the Euler angle
# rotations to the elasticity tensor. The test uses values for the nine C_ijkl
# entries that correspond to the engineering notation placement:
# e.g. C11 = 11e3, c12 = 12e3, c13 = 13e3, c22 = 22e3 ..... c66 = 66e3
#
# A rotation of (0, 90, 0) is applied to the 1x1x1 cube, such that the values of
# c12 and c13 switch, c22 and c33 switch, and c55 and c66 switch. Postprocessors
# are used to verify this switch (made simple with the value convention above)
# and to verify that the unrotated components along the x-axis remain constant.
[Mesh]
type = GeneratedMesh
dim = 3
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[AuxVariables]
[./lage_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./lage_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./pk2_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./lage_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./c11]
order = CONSTANT
family = MONOMIAL
[../]
[./c12]
order = CONSTANT
family = MONOMIAL
[../]
[./c13]
order = CONSTANT
family = MONOMIAL
[../]
[./c22]
order = CONSTANT
family = MONOMIAL
[../]
[./c23]
order = CONSTANT
family = MONOMIAL
[../]
[./c33]
order = CONSTANT
family = MONOMIAL
[../]
[./c44]
order = CONSTANT
family = MONOMIAL
[../]
[./c55]
order = CONSTANT
family = MONOMIAL
[../]
[./c66]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Physics/SolidMechanics/QuasiStatic]
[./all]
strain = FINITE
add_variables = true
[../]
[]
[AuxKernels]
[./lage_xx]
type = RankTwoAux
rank_two_tensor = lage
variable = lage_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./lage_yy]
type = RankTwoAux
rank_two_tensor = lage
variable = lage_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./pk2_yy]
type = RankTwoAux
variable = pk2_yy
rank_two_tensor = pk2
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./lage_zz]
type = RankTwoAux
rank_two_tensor = lage
variable = lage_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./c11]
type = RankFourAux
variable = c11
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 0
index_l = 0
execute_on = timestep_end
[../]
[./c12]
type = RankFourAux
variable = c12
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 1
index_l = 1
execute_on = timestep_end
[../]
[./c13]
type = RankFourAux
variable = c13
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 0
index_k = 2
index_l = 2
execute_on = timestep_end
[../]
[./c22]
type = RankFourAux
variable = c22
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 1
index_k = 1
index_l = 1
execute_on = timestep_end
[../]
[./c23]
type = RankFourAux
variable = c23
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 1
index_k = 2
index_l = 2
execute_on = timestep_end
[../]
[./c33]
type = RankFourAux
variable = c33
rank_four_tensor = elasticity_tensor
index_i = 2
index_j = 2
index_k = 2
index_l = 2
execute_on = timestep_end
[../]
[./c44]
type = RankFourAux
variable = c44
rank_four_tensor = elasticity_tensor
index_i = 1
index_j = 2
index_k = 1
index_l = 2
execute_on = timestep_end
[../]
[./c55]
type = RankFourAux
variable = c55
rank_four_tensor = elasticity_tensor
index_i = 2
index_j = 0
index_k = 2
index_l = 0
execute_on = timestep_end
[../]
[./c66]
type = RankFourAux
variable = c66
rank_four_tensor = elasticity_tensor
index_i = 0
index_j = 1
index_k = 0
index_l = 1
execute_on = timestep_end
[../]
[]
[BCs]
[./bottom]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./left]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./back]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./top]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '11e3 12e3 13e3 22e3 23e3 33e3 44e3 55e3 66e3'
fill_method = symmetric9
euler_angle_1 = 0.0
euler_angle_2 = 45.0
euler_angle_3 = 45.0
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8' #strength units in MPa
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Postprocessors]
[./lage_xx]
type = ElementAverageValue
variable = lage_xx
[../]
[./pk2_yy]
type = ElementAverageValue
variable = pk2_yy
[../]
[./lage_yy]
type = ElementAverageValue
variable = lage_yy
[../]
[./lage_zz]
type = ElementAverageValue
variable = lage_zz
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
[../]
[./c11]
type = ElementAverageValue
variable = c11
[../]
[./c12]
type = ElementAverageValue
variable = c12
[../]
[./c13]
type = ElementAverageValue
variable = c13
[../]
[./c22]
type = ElementAverageValue
variable = c22
[../]
[./c23]
type = ElementAverageValue
variable = c23
[../]
[./c33]
type = ElementAverageValue
variable = c33
[../]
[./c44]
type = ElementAverageValue
variable = c44
[../]
[./c55]
type = ElementAverageValue
variable = c55
[../]
[./c66]
type = ElementAverageValue
variable = c66
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
l_tol = 1e-3
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 1 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
dtmax = 0.1
dtmin = 1.0e-3
dt = 0.05
end_time = 0.5
[]
[Outputs]
exodus = false
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_convergence_issue_flag.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[center_node]
type = BoundingBoxNodeSetGenerator
input = cube
new_boundary = 'center_point'
top_right = '0.51 0.51 0'
bottom_left = '0.49 0.49 0'
[]
[back_edge_y]
type = BoundingBoxNodeSetGenerator
input = center_node
new_boundary = 'back_edge_y'
bottom_left = '0.9 0.5 0'
top_right = '1.1 0.5 0'
[]
[back_edge_x]
type = BoundingBoxNodeSetGenerator
input = back_edge_y
new_boundary = back_edge_x
bottom_left = '0.5 0.9 0'
top_right = '0.5 1.0 0'
[]
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'center_point back_edge_y'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'center_point back_edge_x'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
euler_angle_1 = 164.5
euler_angle_2 = 90.0
euler_angle_3 = 15.3
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
print_state_variable_convergence_error_messages = true
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '0.5 5'
effective_shear_modulus_per_mode = '4.7e4 4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1e5 2e7'
normalized_slip_activiation_energy_per_mode = '4e-3 3e-2'
slip_energy_proportionality_factor_per_mode = '330 100'
substructure_rate_coefficient_per_mode = '400 100'
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '2e-3 2e-3' #minimize impact
grain_size = 20.0e-3 #20 microns
print_state_variable_convergence_error_messages = true
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
nl_max_its = 20
l_max_its = 50
dt = 0.3
dtmin = 1.0e-4
dtmax = 0.1
num_steps = 1
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_substep.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
gen_random_stress_flag = false
maximum_substep_iteration = 2
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.5
dtmax = 10.0
dtmin = 0.5
num_steps = 3
[]
[Outputs]
file_base = crysp_substep_out
exodus = true
csv = true
gnuplot = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/substep.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
block = 0
stol = 1e-2
tan_mod_type = exact
maximum_substep_iteration = 10
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss]
type = ElementAverageValue
variable = gss
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 2.0
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 30.0
dtmin = 0.5
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
csv = true
gnuplot = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/hcp_thermal_eigenstrain.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[e_xtalpl_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_xtalpl_yy]
order = CONSTANT
family = MONOMIAL
[]
[eth_zz]
order = CONSTANT
family = MONOMIAL
[]
[fth_xx]
order = CONSTANT
family = MONOMIAL
[]
[fth_yy]
order = CONSTANT
family = MONOMIAL
[]
[fth_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_xx]
order = CONSTANT
family = MONOMIAL
[]
[fp_yy]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[f_xx]
order = CONSTANT
family = MONOMIAL
[]
[f_yy]
order = CONSTANT
family = MONOMIAL
[]
[f_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = '300+400*t' # temperature increases at a constant rate
execute_on = timestep_begin
[]
[e_xtalpl_xx]
type = RankTwoAux
variable = e_xtalpl_xx
rank_two_tensor = total_lagrangian_strain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_xtalpl_yy]
type = RankTwoAux
variable = e_xtalpl_yy
rank_two_tensor = total_lagrangian_strain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[eth_zz]
type = RankTwoAux
variable = eth_zz
rank_two_tensor = thermal_eigenstrain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fth_xx]
type = RankTwoAux
variable = fth_xx
rank_two_tensor = thermal_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fth_yy]
type = RankTwoAux
variable = fth_yy
rank_two_tensor = thermal_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[fth_zz]
type = RankTwoAux
variable = fth_zz
rank_two_tensor = thermal_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_xx]
type = RankTwoAux
variable = fp_xx
rank_two_tensor = plastic_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = plastic_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[f_xx]
type = RankTwoAux
variable = f_xx
rank_two_tensor = deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[f_yy]
type = RankTwoAux
variable = f_yy
rank_two_tensor = deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[f_zz]
type = RankTwoAux
variable = f_zz
rank_two_tensor = deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = thermal_eigenstrain
tan_mod_type = exact
maximum_substep_iteration = 10
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e3
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '9 22' #Knezevic et al MSEA 654 (2013)
effective_shear_modulus_per_mode = '4.7e2 4.7e2' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1.25e5 2.25e7' #from Beyerlein and Tome 2008 IJP
normalized_slip_activiation_energy_per_mode = '3.73e-3 3.2e-2' #from Beyerlein and Tome 2008 IJP
slip_energy_proportionality_factor_per_mode = '330 100' #from Beyerlein and Tome 2008 IJP
substructure_rate_coefficient_per_mode = '355 0.4' #from Capolungo et al MSEA (2009)
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0.2 0.2' #Estimated to match graph in Capolungo et al MSEA (2009), Figure 2
grain_size = 20.0e-3 #20 microns, Beyerlein and Tome IJP (2008)
[]
[thermal_eigenstrain]
type = ComputeCrystalPlasticityThermalEigenstrain
eigenstrain_name = thermal_eigenstrain
deformation_gradient_name = thermal_deformation_gradient
temperature = temperature
thermal_expansion_coefficients = '1e-05 1e-05 1e-05' # thermal expansion coefficients along three directions
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[e_xtalpl_xx]
type = ElementAverageValue
variable = e_xtalpl_xx
[]
[e_xtalpl_yy]
type = ElementAverageValue
variable = e_xtalpl_yy
[]
[eth_zz]
type = ElementAverageValue
variable = eth_zz
[]
[fth_xx]
type = ElementAverageValue
variable = fth_xx
[]
[fth_yy]
type = ElementAverageValue
variable = fth_yy
[]
[fth_zz]
type = ElementAverageValue
variable = fth_zz
[]
[temperature]
type = ElementAverageValue
variable = temperature
[]
[fp_xx]
type = ElementAverageValue
variable = fp_xx
[]
[fp_yy]
type = ElementAverageValue
variable = fp_yy
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[f_xx]
type = ElementAverageValue
variable = f_xx
[]
[f_yy]
type = ElementAverageValue
variable = f_yy
[]
[f_zz]
type = ElementAverageValue
variable = f_zz
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-6
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 1e-4
num_steps = 10
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_method_test.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_increment
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[slip_increment]
type = ElementAverageValue
variable = slip_increment
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 0.01
dtmax = 10.0
num_steps = 10
[]
[Outputs]
exodus = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/check_direction_twin_propagation.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
elem_type = HEX8
[]
[]
[AuxVariables]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_6]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_7]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_8]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_9]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_11]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_6]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_7]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_8]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_9]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_11]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_5]
type = MaterialStdVectorAux
variable = twin_volume_fraction_5
property = twin_system_volume_fraction
index = 5
execute_on = timestep_end
[]
[twin_volume_fraction_6]
type = MaterialStdVectorAux
variable = twin_volume_fraction_6
property = twin_system_volume_fraction
index = 6
execute_on = timestep_end
[]
[twin_volume_fraction_7]
type = MaterialStdVectorAux
variable = twin_volume_fraction_7
property = twin_system_volume_fraction
index = 7
execute_on = timestep_end
[]
[twin_volume_fraction_8]
type = MaterialStdVectorAux
variable = twin_volume_fraction_8
property = twin_system_volume_fraction
index = 8
execute_on = timestep_end
[]
[twin_volume_fraction_9]
type = MaterialStdVectorAux
variable = twin_volume_fraction_9
property = twin_system_volume_fraction
index = 9
execute_on = timestep_end
[]
[twin_volume_fraction_10]
type = MaterialStdVectorAux
variable = twin_volume_fraction_10
property = twin_system_volume_fraction
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_11]
type = MaterialStdVectorAux
variable = twin_volume_fraction_11
property = twin_system_volume_fraction
index = 11
execute_on = timestep_end
[]
[twin_tau_0]
type = MaterialStdVectorAux
variable = twin_tau_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[twin_tau_1]
type = MaterialStdVectorAux
variable = twin_tau_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[twin_tau_2]
type = MaterialStdVectorAux
variable = twin_tau_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[twin_tau_3]
type = MaterialStdVectorAux
variable = twin_tau_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[twin_tau_4]
type = MaterialStdVectorAux
variable = twin_tau_4
property = applied_shear_stress
index = 4
execute_on = timestep_end
[]
[twin_tau_5]
type = MaterialStdVectorAux
variable = twin_tau_5
property = applied_shear_stress
index = 5
execute_on = timestep_end
[]
[twin_tau_6]
type = MaterialStdVectorAux
variable = twin_tau_6
property = applied_shear_stress
index = 6
execute_on = timestep_end
[]
[twin_tau_7]
type = MaterialStdVectorAux
variable = twin_tau_7
property = applied_shear_stress
index = 7
execute_on = timestep_end
[]
[twin_tau_8]
type = MaterialStdVectorAux
variable = twin_tau_8
property = applied_shear_stress
index = 8
execute_on = timestep_end
[]
[twin_tau_9]
type = MaterialStdVectorAux
variable = twin_tau_9
property = applied_shear_stress
index = 9
execute_on = timestep_end
[]
[twin_tau_10]
type = MaterialStdVectorAux
variable = twin_tau_10
property = applied_shear_stress
index = 10
execute_on = timestep_end
[]
[twin_tau_11]
type = MaterialStdVectorAux
variable = twin_tau_11
property = applied_shear_stress
index = 11
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '-5.0e-4*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.08e5 6.034e4 6.034e4 1.08e5 6.03e4 1.08e5 2.86e4 2.86e4 2.86e4' #Tallon and Wolfenden. J. Phys. Chem. Solids (1979)
fill_method = symmetric9
euler_angle_1 = 54.74
euler_angle_2 = 45.0
euler_angle_3 = 270.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_only_xtalpl'
tan_mod_type = exact
[]
[twin_only_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = 'fcc_input_twinning_systems.txt'
initial_twin_lattice_friction = 2.0
[]
[]
[Postprocessors]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_5]
type = ElementAverageValue
variable = twin_volume_fraction_5
[]
[twin_volume_fraction_6]
type = ElementAverageValue
variable = twin_volume_fraction_6
[]
[twin_volume_fraction_7]
type = ElementAverageValue
variable = twin_volume_fraction_7
[]
[twin_volume_fraction_8]
type = ElementAverageValue
variable = twin_volume_fraction_8
[]
[twin_volume_fraction_9]
type = ElementAverageValue
variable = twin_volume_fraction_9
[]
[twin_volume_fraction_10]
type = ElementAverageValue
variable = twin_volume_fraction_10
[]
[twin_volume_fraction_11]
type = ElementAverageValue
variable = twin_volume_fraction_11
[]
[twin_tau_0]
type = ElementAverageValue
variable = twin_tau_0
[]
[twin_tau_1]
type = ElementAverageValue
variable = twin_tau_1
[]
[twin_tau_2]
type = ElementAverageValue
variable = twin_tau_2
[]
[twin_tau_3]
type = ElementAverageValue
variable = twin_tau_3
[]
[twin_tau_4]
type = ElementAverageValue
variable = twin_tau_4
[]
[twin_tau_5]
type = ElementAverageValue
variable = twin_tau_5
[]
[twin_tau_6]
type = ElementAverageValue
variable = twin_tau_6
[]
[twin_tau_7]
type = ElementAverageValue
variable = twin_tau_7
[]
[twin_tau_8]
type = ElementAverageValue
variable = twin_tau_8
[]
[twin_tau_9]
type = ElementAverageValue
variable = twin_tau_9
[]
[twin_tau_10]
type = ElementAverageValue
variable = twin_tau_10
[]
[twin_tau_11]
type = ElementAverageValue
variable = twin_tau_11
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.025
dtmin = 0.0125
num_steps = 9
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/patch_recovery.i)
[GlobalParams]
displacements = 'ux uy'
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[AuxVariables]
[stress_xx_recovered]
order = FIRST
family = LAGRANGE
[]
[stress_yy_recovered]
order = FIRST
family = LAGRANGE
[]
[]
[Functions]
[tdisp]
type = ParsedFunction
expression = 0.01*t
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[stress_xx_recovered]
type = NodalPatchRecoveryAux
variable = stress_xx_recovered
nodal_patch_recovery_uo = stress_xx_patch
execute_on = 'TIMESTEP_END'
[]
[stress_yy_recovered]
type = NodalPatchRecoveryAux
variable = stress_yy_recovered
nodal_patch_recovery_uo = stress_yy_patch
execute_on = 'TIMESTEP_END'
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = uy
boundary = top
function = tdisp
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[UserObjects]
[stress_xx_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '0 0'
execute_on = 'TIMESTEP_END'
[]
[stress_yy_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '1 1'
execute_on = 'TIMESTEP_END'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.05
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_euler_angle.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[euler_angle_1]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_2]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[euler_angle_1]
type = MaterialRealVectorValueAux
variable = euler_angle_1
property = updated_Euler_angle
component = 0
execute_on = timestep_end
[]
[euler_angle_2]
type = MaterialRealVectorValueAux
variable = euler_angle_2
property = updated_Euler_angle
component = 1
execute_on = timestep_end
[]
[euler_angle_3]
type = MaterialRealVectorValueAux
variable = euler_angle_3
property = updated_Euler_angle
component = 2
execute_on = timestep_end
[]
[]
[BCs]
[Periodic]
[all]
variable = 'disp_x'
auto_direction = 'z'
[]
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = 'front'
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[updated_euler_angle]
type = ComputeUpdatedEulerAngle
radian_to_degree = true
[]
[]
[Postprocessors]
[euler_angle_1]
type = ElementAverageValue
variable = euler_angle_1
[]
[euler_angle_2]
type = ElementAverageValue
variable = euler_angle_2
[]
[euler_angle_3]
type = ElementAverageValue
variable = euler_angle_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu '
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 0.01
end_time = 5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_no_negative_aprismatic.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[center_node]
type = BoundingBoxNodeSetGenerator
input = cube
new_boundary = 'center_point'
top_right = '0.51 0.51 0'
bottom_left = '0.49 0.49 0'
[]
[back_edge_y]
type = BoundingBoxNodeSetGenerator
input = center_node
new_boundary = 'back_edge_y'
bottom_left = '0.9 0.5 0'
top_right = '1.1 0.5 0'
[]
[back_edge_x]
type = BoundingBoxNodeSetGenerator
input = back_edge_y
new_boundary = back_edge_x
bottom_left = '0.5 0.9 0'
top_right = '0.5 1.0 0'
[]
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_1]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_2]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_12]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_13]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_0]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_1]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_2]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_12]
order = CONSTANT
family = MONOMIAL
[]
[forest_dislocations_13]
order = CONSTANT
family = MONOMIAL
[]
[substructure_density]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_1]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_2]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_12]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_13]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_0]
type = MaterialStdVectorAux
variable = resolved_shear_stress_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[tau_1]
type = MaterialStdVectorAux
variable = resolved_shear_stress_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[tau_2]
type = MaterialStdVectorAux
variable = resolved_shear_stress_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[tau_12]
type = MaterialStdVectorAux
variable = resolved_shear_stress_12
property = applied_shear_stress
index = 12
execute_on = timestep_end
[]
[tau_13]
type = MaterialStdVectorAux
variable = resolved_shear_stress_13
property = applied_shear_stress
index = 13
execute_on = timestep_end
[]
[forest_dislocations_0]
type = MaterialStdVectorAux
variable = forest_dislocations_0
property = forest_dislocation_density
index = 0
execute_on = timestep_end
[]
[forest_dislocations_1]
type = MaterialStdVectorAux
variable = forest_dislocations_1
property = forest_dislocation_density
index = 1
execute_on = timestep_end
[]
[forest_dislocations_2]
type = MaterialStdVectorAux
variable = forest_dislocations_2
property = forest_dislocation_density
index = 2
execute_on = timestep_end
[]
[forest_dislocations_12]
type = MaterialStdVectorAux
variable = forest_dislocations_12
property = forest_dislocation_density
index = 12
execute_on = timestep_end
[]
[forest_dislocations_13]
type = MaterialStdVectorAux
variable = forest_dislocations_13
property = forest_dislocation_density
index = 13
execute_on = timestep_end
[]
[substructure_density]
type = MaterialRealAux
variable = substructure_density
property = total_substructure_density
execute_on = timestep_end
[]
[slip_resistance_0]
type = MaterialStdVectorAux
variable = slip_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_resistance_1]
type = MaterialStdVectorAux
variable = slip_resistance_1
property = slip_resistance
index = 1
execute_on = timestep_end
[]
[slip_resistance_2]
type = MaterialStdVectorAux
variable = slip_resistance_2
property = slip_resistance
index = 2
execute_on = timestep_end
[]
[slip_resistance_12]
type = MaterialStdVectorAux
variable = slip_resistance_12
property = slip_resistance
index = 12
execute_on = timestep_end
[]
[slip_resistance_13]
type = MaterialStdVectorAux
variable = slip_resistance_13
property = slip_resistance
index = 13
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'center_point back_edge_y'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'center_point back_edge_x'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
euler_angle_1 = 164.5
euler_angle_2 = 90.0
euler_angle_3 = 15.3
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0
zero_tol = 1.1
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '0.5 5'
effective_shear_modulus_per_mode = '4.7e4 4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '-1e5 -2e7'
normalized_slip_activiation_energy_per_mode = '4e-3 3e-2'
slip_energy_proportionality_factor_per_mode = '330 100'
substructure_rate_coefficient_per_mode = '400 100'
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '2e-3 2e-3' #minimize impact
grain_size = 20.0e-3 #20 microns
[]
[]
[Postprocessors]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[tau_0]
type = ElementAverageValue
variable = resolved_shear_stress_0
[]
[tau_1]
type = ElementAverageValue
variable = resolved_shear_stress_1
[]
[tau_2]
type = ElementAverageValue
variable = resolved_shear_stress_2
[]
[tau_12]
type = ElementAverageValue
variable = resolved_shear_stress_12
[]
[tau_13]
type = ElementAverageValue
variable = resolved_shear_stress_13
[]
[forest_dislocation_0]
type = ElementAverageValue
variable = forest_dislocations_0
[]
[forest_dislocation_1]
type = ElementAverageValue
variable = forest_dislocations_1
[]
[forest_dislocation_2]
type = ElementAverageValue
variable = forest_dislocations_2
[]
[forest_dislocation_12]
type = ElementAverageValue
variable = forest_dislocations_12
[]
[forest_dislocation_13]
type = ElementAverageValue
variable = forest_dislocations_13
[]
[substructure_density]
type = ElementAverageValue
variable = substructure_density
[]
[slip_resistance_0]
type = ElementAverageValue
variable = slip_resistance_0
[]
[slip_resistance_1]
type = ElementAverageValue
variable = slip_resistance_1
[]
[slip_resistance_2]
type = ElementAverageValue
variable = slip_resistance_2
[]
[slip_resistance_12]
type = ElementAverageValue
variable = slip_resistance_12
[]
[slip_resistance_13]
type = ElementAverageValue
variable = slip_resistance_13
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
nl_max_its = 20
l_max_its = 50
dt = 0.00375
dtmin = 1.0e-4
dtmax = 0.1
num_steps = 9
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/cp_slip_rate_integ/crysp_linesearch.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[./disp_z]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.0001*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCPSlipRateRes
block = 0
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.01 5 8 0.001 0.01 9 12 0.001 0.01'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
slip_incr_tol = 1
maximum_substep_iteration = 12
use_line_search = true
rtol = 1e-8
abs_tol = 1e-12
line_search_method = 'BISECTION'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y disp_z'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 10
dtmin = 0.05
dtmax = 1e4
num_steps = 10
[]
[Outputs]
file_base = crysp_linesearch_out
exodus = true
print_linear_residuals = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_twinning/modified_kalidindi_for_hcp.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[single_xtal]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[temperature]
initial_condition = 300
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_xx]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_increment_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_increment_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_increment_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_increment_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_increment_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_increment_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_5]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_1]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_2]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_4]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_5]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_xx]
type = RankTwoAux
variable = fp_xx
rank_two_tensor = plastic_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = twin_total_volume_fraction_twins
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_5]
type = MaterialStdVectorAux
variable = twin_volume_fraction_5
property = twin_twin_system_volume_fraction
index = 5
execute_on = timestep_end
[]
[twin_resistance_0]
type = MaterialStdVectorAux
variable = twin_resistance_0
property = twin_slip_resistance
index = 0
execute_on = timestep_end
[]
[twin_resistance_1]
type = MaterialStdVectorAux
variable = twin_resistance_1
property = twin_slip_resistance
index = 1
execute_on = timestep_end
[]
[twin_resistance_2]
type = MaterialStdVectorAux
variable = twin_resistance_2
property = twin_slip_resistance
index = 2
execute_on = timestep_end
[]
[twin_resistance_3]
type = MaterialStdVectorAux
variable = twin_resistance_3
property = twin_slip_resistance
index = 3
execute_on = timestep_end
[]
[twin_resistance_4]
type = MaterialStdVectorAux
variable = twin_resistance_4
property = twin_slip_resistance
index = 4
execute_on = timestep_end
[]
[twin_resistance_5]
type = MaterialStdVectorAux
variable = twin_resistance_5
property = twin_slip_resistance
index = 5
execute_on = timestep_end
[]
[twin_increment_0]
type = MaterialStdVectorAux
variable = twin_increment_0
property = twin_slip_increment
index = 0
execute_on = timestep_end
[]
[twin_increment_1]
type = MaterialStdVectorAux
variable = twin_increment_1
property = twin_slip_increment
index = 1
execute_on = timestep_end
[]
[twin_increment_2]
type = MaterialStdVectorAux
variable = twin_increment_2
property = twin_slip_increment
index = 2
execute_on = timestep_end
[]
[twin_increment_3]
type = MaterialStdVectorAux
variable = twin_increment_3
property = twin_slip_increment
index = 3
execute_on = timestep_end
[]
[twin_increment_4]
type = MaterialStdVectorAux
variable = twin_increment_4
property = twin_slip_increment
index = 4
execute_on = timestep_end
[]
[twin_increment_5]
type = MaterialStdVectorAux
variable = twin_increment_5
property = twin_slip_increment
index = 5
execute_on = timestep_end
[]
[twin_tau_0]
type = MaterialStdVectorAux
variable = resolved_twin_stress_0
property = twin_applied_shear_stress
index = 0
execute_on = timestep_end
[]
[twin_tau_1]
type = MaterialStdVectorAux
variable = resolved_twin_stress_1
property = twin_applied_shear_stress
index = 1
execute_on = timestep_end
[]
[twin_tau_2]
type = MaterialStdVectorAux
variable = resolved_twin_stress_2
property = twin_applied_shear_stress
index = 2
execute_on = timestep_end
[]
[twin_tau_3]
type = MaterialStdVectorAux
variable = resolved_twin_stress_3
property = twin_applied_shear_stress
index = 3
execute_on = timestep_end
[]
[twin_tau_4]
type = MaterialStdVectorAux
variable = resolved_twin_stress_4
property = twin_applied_shear_stress
index = 4
execute_on = timestep_end
[]
[twin_tau_5]
type = MaterialStdVectorAux
variable = resolved_twin_stress_5
property = twin_applied_shear_stress
index = 5
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
preset = true
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_xtalpl'
tan_mod_type = exact
[]
[twin_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
base_name = twin
crystal_lattice_type = HCP
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
number_slip_systems = 6
slip_sys_file_name = 'hcp_tensile_twin_systems.txt'
initial_twin_lattice_friction = 1140
non_coplanar_coefficient_twin_hardening = 10000
coplanar_coefficient_twin_hardening = 1000
characteristic_twin_shear = 0.167
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_xx]
type = ElementAverageValue
variable = fp_xx
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_5]
type = ElementAverageValue
variable = twin_volume_fraction_5
[]
[twin_resistance_0]
type = ElementAverageValue
variable = twin_resistance_0
[]
[twin_resistance_1]
type = ElementAverageValue
variable = twin_resistance_1
[]
[twin_resistance_2]
type = ElementAverageValue
variable = twin_resistance_2
[]
[twin_resistance_3]
type = ElementAverageValue
variable = twin_resistance_3
[]
[twin_resistance_4]
type = ElementAverageValue
variable = twin_resistance_4
[]
[twin_resistance_5]
type = ElementAverageValue
variable = twin_resistance_5
[]
[twin_increment_0]
type = ElementAverageValue
variable = twin_increment_0
[]
[twin_increment_1]
type = ElementAverageValue
variable = twin_increment_1
[]
[twin_increment_2]
type = ElementAverageValue
variable = twin_increment_2
[]
[twin_increment_3]
type = ElementAverageValue
variable = twin_increment_3
[]
[twin_increment_4]
type = ElementAverageValue
variable = twin_increment_4
[]
[twin_increment_5]
type = ElementAverageValue
variable = twin_increment_5
[]
[twin_tau_0]
type = ElementAverageValue
variable = resolved_twin_stress_0
[]
[twin_tau_1]
type = ElementAverageValue
variable = resolved_twin_stress_1
[]
[twin_tau_2]
type = ElementAverageValue
variable = resolved_twin_stress_2
[]
[twin_tau_3]
type = ElementAverageValue
variable = resolved_twin_stress_3
[]
[twin_tau_4]
type = ElementAverageValue
variable = resolved_twin_stress_4
[]
[twin_tau_5]
type = ElementAverageValue
variable = resolved_twin_stress_5
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.5
dtmin = 1.0e-2
dtmax = 10.0
end_time = 2.5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/user_object_Voce_BCC.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 2
ny = 2
[]
[GlobalParams]
volumetric_locking_correction = true
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = element
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = lage
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 48
slip_sys_file_name = input_slip_sys_bcc48.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 12 0.001 0.1 13 24 0.001 0.1 25 48 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 48
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 48
groups = '0 12 24 48'
group_values = '50 51 52'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_voce
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_voce]
type = CrystalPlasticityStateVarRateComponentVoce
variable_size = 48
crystal_lattice_type = 'BCC'
groups = '0 12 24 48'
h0_group_values = '1 2 3'
tau0_group_values = '50 51 52'
tauSat_group_values = '70 81 92'
hardeningExponent_group_values = '1 2 3'
selfHardening_group_values ='4 5 6'
coplanarHardening_group_values='7 8 9'
GroupGroup_Hardening_group_values = '10 20 30
40 50 60
70 80 90'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_voce'
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'disp_x disp_y'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.01
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.01
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/volumetric_eigenstrain_increase.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX27
[]
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[linear_void_strain]
order = CONSTANT
family = MONOMIAL
[]
[e_void_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_void_yy]
order = CONSTANT
family = MONOMIAL
[]
[e_void_zz]
order = CONSTANT
family = MONOMIAL
[]
[f_void_zz]
order = CONSTANT
family = MONOMIAL
[]
[pk2_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[tau_0]
order = FIRST
family = MONOMIAL
[]
[tau_10]
order = FIRST
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[Functions]
[temperature_ramp]
type = ParsedFunction
expression = '600.0 + t'
[]
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = 'temperature_ramp'
execute_on = timestep_begin
[]
[linear_void_strain]
type = MaterialRealAux
variable = linear_void_strain
property = equivalent_linear_change
execute_on = timestep_end
[]
[e_void_xx]
type = RankTwoAux
variable = e_void_xx
rank_two_tensor = void_eigenstrain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_void_yy]
type = RankTwoAux
variable = e_void_yy
rank_two_tensor = void_eigenstrain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[e_void_zz]
type = RankTwoAux
variable = e_void_zz
rank_two_tensor = void_eigenstrain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[f_void_zz]
type = RankTwoAux
variable = f_void_zz
rank_two_tensor = volumetric_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[pk2_zz]
type = RankTwoAux
variable = pk2_zz
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_0]
type = MaterialStdVectorAux
variable = tau_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[tau_10]
type = MaterialStdVectorAux
variable = tau_10
property = applied_shear_stress
index = 10
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[hold_front]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.98e5 1.25e5 1.25e5 1.98e5 1.25e5 1.98e5 1.22e5 1.22e5 1.22e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = void_eigenstrain
tan_mod_type = exact
line_search_method = CUT_HALF
use_line_search = true
maximum_substep_iteration = 5
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[void_eigenstrain]
type = ComputeCrystalPlasticityVolumetricEigenstrain
eigenstrain_name = void_eigenstrain
deformation_gradient_name = volumetric_deformation_gradient
mean_spherical_void_radius = void_radius
spherical_void_number_density = void_density
[]
[void_density]
type = ParsedMaterial
property_name = void_density
coupled_variables = temperature
expression = '1.0e8 * (temperature - 600.0)'
[]
[void_radius]
type = GenericConstantMaterial
prop_names = void_radius
prop_values = '1.0e-6' ##1 nm avg particle radius
[]
[]
[Postprocessors]
[linear_void_strain]
type = ElementAverageValue
variable = linear_void_strain
[]
[e_void_xx]
type = ElementAverageValue
variable = e_void_xx
[]
[e_void_yy]
type = ElementAverageValue
variable = e_void_yy
[]
[e_void_zz]
type = ElementAverageValue
variable = e_void_zz
[]
[f_void_zz]
type = ElementAverageValue
variable = f_void_zz
[]
[density]
type = ElementAverageMaterialProperty
mat_prop = void_density
execute_on = TIMESTEP_END
[]
[radius]
type = ElementAverageMaterialProperty
mat_prop = void_radius
execute_on = TIMESTEP_END
[]
[pk2_zz]
type = ElementAverageValue
variable = pk2_zz
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[tau_0]
type = ElementAverageValue
variable = tau_0
[]
[tau_10]
type = ElementAverageValue
variable = tau_10
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
line_search = 'none'
nl_abs_tol = 1e-12
nl_rel_tol = 1e-8
nl_forced_its = 1
dt = 1.0
dtmin = 0.1
end_time = 5.0
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/contact/examples/3d_berkovich/indenter_berkovich_friction.i)
[Mesh]
file = indenter.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
order = FIRST
family = LAGRANGE
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[]
[AuxKernels]
[]
[Functions]
[./push_down]
type = ParsedFunction
expression = 'if(t < 1.5, -t, t-3.0)'
[../]
[]
[Physics/SolidMechanics/QuasiStatic]
[./all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
save_in = 'saved_x saved_y saved_z'
use_finite_deform_jacobian = true
[../]
[]
[BCs]
[./botz]
type = DirichletBC
variable = disp_z
boundary = 101
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
boundary = 101
value = 0.0
[../]
[./botx]
type = DirichletBC
variable = disp_x
boundary = 101
value = 0.0
[../]
[./boty111]
type = DirichletBC
variable = disp_y
boundary = 111
value = 0.0
[../]
[./botx111]
type = DirichletBC
variable = disp_x
boundary = 111
value = 0.0
[../]
[./topz]
type = FunctionDirichletBC
variable = disp_z
boundary = '201'
function = push_down
[../]
[./topy]
type = DirichletBC
variable = disp_y
boundary = 201
value = 0.0
[../]
[./topx]
type = DirichletBC
variable = disp_x
boundary = 201
value = 0.0
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 48
slip_sys_file_name = input_slip_sys_bcc48.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 48 0.0001 0.01'
uo_state_var_name = state_var_gss
slip_incr_tol = 10.0
block = 1
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 48
uo_state_var_name = state_var_gss
block = 1
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 48
groups = '0 24 48'
group_values = '900 1000' #120
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
block = 1
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 48
hprops = '1.4 1000 1200 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
block = 1
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
block = 1
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
maximum_substep_iteration = 25
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 1
C_ijkl = '265190 113650 113650 265190 113650 265190 75769 75769 75760'
fill_method = symmetric9
[../]
[./elasticity_tensor_indenter]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1000000.0
poissons_ratio = 0.3
block = 2
[../]
[./stress_indenter]
type = ComputeFiniteStrainElasticStress
block = 2
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 1
[../]
[./resid_z]
type = NodalSum
variable = saved_z
boundary = 201
[../]
[./disp_z]
type = NodalExtremeValue
variable = disp_z
boundary = 201
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 60
nl_max_its = 50
dt = 0.004
dtmin = 0.00001
end_time = 1.8
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6 # 6 if no friction
l_tol = 1e-3
automatic_scaling = true
[]
[Outputs]
[./my_checkpoint]
type = Checkpoint
time_step_interval = 50
[../]
exodus = true
csv = true
print_linear_residuals = true
print_perf_log = true
[./console]
type = Console
max_rows = 5
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
primary = '202'
secondary = '102'
[../]
[]
[Contact]
[./ind_base]
primary = 202
secondary = 102
model = coulomb
friction_coefficient = 0.4
normalize_penalty = true
formulation = tangential_penalty
penalty = 1e7
capture_tolerance = 0.0001
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/user_object.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 2
ny = 2
[]
[GlobalParams]
volumetric_locking_correction = true
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = element
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = lage
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'disp_x disp_y'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.01
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.01
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/nodal_patch_recovery/patch_recovery.i)
[GlobalParams]
displacements = 'ux uy'
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 4
ny = 4
[]
[UserObjects]
[stress_xx_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '0 0'
execute_on = 'TIMESTEP_END'
[]
[stress_yy_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '1 1'
execute_on = 'TIMESTEP_END'
[]
[]
[AuxVariables]
[stress_xx_recovered]
order = FIRST
family = LAGRANGE
[]
[stress_yy_recovered]
order = FIRST
family = LAGRANGE
[]
[]
[Functions]
[tdisp]
type = ParsedFunction
expression = 0.01*t
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[stress_xx_recovered]
type = NodalPatchRecoveryAux
variable = stress_xx_recovered
nodal_patch_recovery_uo = stress_xx_patch
execute_on = 'TIMESTEP_END'
[]
[stress_yy_recovered]
type = NodalPatchRecoveryAux
variable = stress_yy_recovered
nodal_patch_recovery_uo = stress_yy_patch
execute_on = 'TIMESTEP_END'
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = uy
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = ux
boundary = 'top bottom'
value = 0
[]
[disp_y]
type = FunctionDirichletBC
variable = uy
boundary = 'top'
function = tdisp
preset = false
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
automatic_scaling = true
dt = 0.05
num_steps = 2
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
[]
[Outputs]
exodus = true
print_linear_residuals = false
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/volumetric_eigenstrain_parabolic.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX27
[]
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[linear_void_strain]
order = CONSTANT
family = MONOMIAL
[]
[e_total_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_total_yy]
order = CONSTANT
family = MONOMIAL
[]
[e_void_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_void_yy]
order = CONSTANT
family = MONOMIAL
[]
[e_void_zz]
order = CONSTANT
family = MONOMIAL
[]
[f_void_zz]
order = CONSTANT
family = MONOMIAL
[]
[pk2_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[Functions]
[temperature_ramp]
type = ParsedFunction
expression = '600.0 + t'
[]
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = 'temperature_ramp'
execute_on = timestep_begin
[]
[linear_void_strain]
type = MaterialRealAux
variable = linear_void_strain
property = equivalent_linear_change
execute_on = timestep_end
[]
[e_total_xx]
type = RankTwoAux
variable = e_total_xx
rank_two_tensor = total_lagrangian_strain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_total_yy]
type = RankTwoAux
variable = e_total_yy
rank_two_tensor = total_lagrangian_strain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[e_void_xx]
type = RankTwoAux
variable = e_void_xx
rank_two_tensor = void_eigenstrain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_void_yy]
type = RankTwoAux
variable = e_void_yy
rank_two_tensor = void_eigenstrain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[e_void_zz]
type = RankTwoAux
variable = e_void_zz
rank_two_tensor = void_eigenstrain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[f_void_zz]
type = RankTwoAux
variable = f_void_zz
rank_two_tensor = volumetric_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[pk2_zz]
type = RankTwoAux
variable = pk2_zz
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[hold_front]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.98e5 1.25e5 1.25e5 1.98e5 1.25e5 1.98e5 1.22e5 1.22e5 1.22e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = void_eigenstrain
tan_mod_type = exact
line_search_method = CUT_HALF
use_line_search = true
maximum_substep_iteration = 5
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[void_eigenstrain]
type = ComputeCrystalPlasticityVolumetricEigenstrain
eigenstrain_name = void_eigenstrain
deformation_gradient_name = volumetric_deformation_gradient
mean_spherical_void_radius = void_radius
spherical_void_number_density = void_density
[]
[void_density]
type = ParsedMaterial
property_name = void_density
coupled_variables = temperature
expression = 'if(temperature<601.0, 1.0e6, (-1.0e6 * (temperature - 603)^2.0 + 5.0e6))'
[]
[void_radius]
type = ParsedMaterial
property_name = void_radius
coupled_variables = temperature
expression = 'if(temperature<601.0, 1.0e-6, (-2.25e-6 * (temperature - 603)^2.0 + 1.0e-5))'
[]
[]
[Postprocessors]
[linear_void_strain]
type = ElementAverageValue
variable = linear_void_strain
[]
[e_void_xx]
type = ElementAverageValue
variable = e_void_xx
[]
[e_void_yy]
type = ElementAverageValue
variable = e_void_yy
[]
[e_void_zz]
type = ElementAverageValue
variable = e_void_zz
[]
[f_void_zz]
type = ElementAverageValue
variable = f_void_zz
[]
[void_density]
type = ElementAverageMaterialProperty
mat_prop = void_density
execute_on = TIMESTEP_END
[]
[void_radius]
type = ElementAverageMaterialProperty
mat_prop = void_radius
execute_on = TIMESTEP_END
[]
[pk2_zz]
type = ElementAverageValue
variable = pk2_zz
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_total_xx]
type = ElementAverageValue
variable = e_total_xx
[]
[e_total_yy]
type = ElementAverageValue
variable = e_total_yy
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
line_search = 'none'
nl_abs_tol = 1e-12
nl_rel_tol = 1e-8
nl_forced_its = 1
dt = 1.0
dtmin = 1.0e-4
end_time = 5.0
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/combined_twinning_slip_100compression.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_1]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_2]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_3]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_4]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_5]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_6]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_7]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_8]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_9]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_10]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_11]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_5]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_6]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_7]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_8]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_9]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_11]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = twin_total_volume_fraction_twins
execute_on = timestep_end
[]
[slip_increment_0]
type = MaterialStdVectorAux
variable = slip_increment_0
property = slip_increment
index = 0
execute_on = timestep_end
[]
[slip_increment_1]
type = MaterialStdVectorAux
variable = slip_increment_1
property = slip_increment
index = 1
execute_on = timestep_end
[]
[slip_increment_2]
type = MaterialStdVectorAux
variable = slip_increment_2
property = slip_increment
index = 2
execute_on = timestep_end
[]
[slip_increment_3]
type = MaterialStdVectorAux
variable = slip_increment_3
property = slip_increment
index = 3
execute_on = timestep_end
[]
[slip_increment_4]
type = MaterialStdVectorAux
variable = slip_increment_4
property = slip_increment
index = 4
execute_on = timestep_end
[]
[slip_increment_5]
type = MaterialStdVectorAux
variable = slip_increment_5
property = slip_increment
index = 5
execute_on = timestep_end
[]
[slip_increment_6]
type = MaterialStdVectorAux
variable = slip_increment_6
property = slip_increment
index = 6
execute_on = timestep_end
[]
[slip_increment_7]
type = MaterialStdVectorAux
variable = slip_increment_7
property = slip_increment
index = 7
execute_on = timestep_end
[]
[slip_increment_8]
type = MaterialStdVectorAux
variable = slip_increment_8
property = slip_increment
index = 8
execute_on = timestep_end
[]
[slip_increment_9]
type = MaterialStdVectorAux
variable = slip_increment_9
property = slip_increment
index = 9
execute_on = timestep_end
[]
[slip_increment_10]
type = MaterialStdVectorAux
variable = slip_increment_10
property = slip_increment
index = 10
execute_on = timestep_end
[]
[slip_increment_11]
type = MaterialStdVectorAux
variable = slip_increment_11
property = slip_increment
index = 11
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_5]
type = MaterialStdVectorAux
variable = twin_volume_fraction_5
property = twin_twin_system_volume_fraction
index = 5
execute_on = timestep_end
[]
[twin_volume_fraction_6]
type = MaterialStdVectorAux
variable = twin_volume_fraction_6
property = twin_twin_system_volume_fraction
index = 6
execute_on = timestep_end
[]
[twin_volume_fraction_7]
type = MaterialStdVectorAux
variable = twin_volume_fraction_7
property = twin_twin_system_volume_fraction
index = 7
execute_on = timestep_end
[]
[twin_volume_fraction_8]
type = MaterialStdVectorAux
variable = twin_volume_fraction_8
property = twin_twin_system_volume_fraction
index = 8
execute_on = timestep_end
[]
[twin_volume_fraction_9]
type = MaterialStdVectorAux
variable = twin_volume_fraction_9
property = twin_twin_system_volume_fraction
index = 9
execute_on = timestep_end
[]
[twin_volume_fraction_10]
type = MaterialStdVectorAux
variable = twin_volume_fraction_10
property = twin_twin_system_volume_fraction
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_11]
type = MaterialStdVectorAux
variable = twin_volume_fraction_11
property = twin_twin_system_volume_fraction
index = 11
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '-0.025*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5' # roughly copper
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_xtalpl slip_xtalpl'
tan_mod_type = exact
[]
[twin_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
base_name = twin
number_slip_systems = 12
slip_sys_file_name = 'fcc_input_twinning_systems.txt'
initial_twin_lattice_friction = 60.0
[]
[slip_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
total_twin_volume_fraction = 'twin_total_volume_fraction_twins'
[]
[]
[Postprocessors]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[slip_increment_0]
type = ElementAverageValue
variable = slip_increment_0
[]
[slip_increment_1]
type = ElementAverageValue
variable = slip_increment_1
[]
[slip_increment_2]
type = ElementAverageValue
variable = slip_increment_2
[]
[slip_increment_3]
type = ElementAverageValue
variable = slip_increment_3
[]
[slip_increment_4]
type = ElementAverageValue
variable = slip_increment_4
[]
[slip_increment_5]
type = ElementAverageValue
variable = slip_increment_5
[]
[slip_increment_6]
type = ElementAverageValue
variable = slip_increment_6
[]
[slip_increment_7]
type = ElementAverageValue
variable = slip_increment_7
[]
[slip_increment_8]
type = ElementAverageValue
variable = slip_increment_8
[]
[slip_increment_9]
type = ElementAverageValue
variable = slip_increment_9
[]
[slip_increment_10]
type = ElementAverageValue
variable = slip_increment_10
[]
[slip_increment_11]
type = ElementAverageValue
variable = slip_increment_11
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_5]
type = ElementAverageValue
variable = twin_volume_fraction_5
[]
[twin_volume_fraction_6]
type = ElementAverageValue
variable = twin_volume_fraction_6
[]
[twin_volume_fraction_7]
type = ElementAverageValue
variable = twin_volume_fraction_7
[]
[twin_volume_fraction_8]
type = ElementAverageValue
variable = twin_volume_fraction_8
[]
[twin_volume_fraction_9]
type = ElementAverageValue
variable = twin_volume_fraction_9
[]
[twin_volume_fraction_10]
type = ElementAverageValue
variable = twin_volume_fraction_10
[]
[twin_volume_fraction_11]
type = ElementAverageValue
variable = twin_volume_fraction_11
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.005
dtmin = 0.01
num_steps = 10
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/non_coplanar_twin_hardening.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_3]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_1]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_2]
order = CONSTANT
family = MONOMIAL
[]
[twin_tau_3]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = total_volume_fraction_twins
execute_on = timestep_end
[]
[twin_resistance_0]
type = MaterialStdVectorAux
variable = twin_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[twin_resistance_1]
type = MaterialStdVectorAux
variable = twin_resistance_1
property = slip_resistance
index = 1
execute_on = timestep_end
[]
[twin_resistance_2]
type = MaterialStdVectorAux
variable = twin_resistance_2
property = slip_resistance
index = 2
execute_on = timestep_end
[]
[twin_resistance_3]
type = MaterialStdVectorAux
variable = twin_resistance_3
property = slip_resistance
index = 3
execute_on = timestep_end
[]
[twin_volume_fraction_0]
type = MaterialStdVectorAux
variable = twin_volume_fraction_0
property = twin_system_volume_fraction
index = 0
execute_on = timestep_end
[]
[twin_volume_fraction_1]
type = MaterialStdVectorAux
variable = twin_volume_fraction_1
property = twin_system_volume_fraction
index = 1
execute_on = timestep_end
[]
[twin_volume_fraction_2]
type = MaterialStdVectorAux
variable = twin_volume_fraction_2
property = twin_system_volume_fraction
index = 2
execute_on = timestep_end
[]
[twin_volume_fraction_3]
type = MaterialStdVectorAux
variable = twin_volume_fraction_3
property = twin_system_volume_fraction
index = 3
execute_on = timestep_end
[]
[twin_tau_0]
type = MaterialStdVectorAux
variable = twin_tau_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[twin_tau_1]
type = MaterialStdVectorAux
variable = twin_tau_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[twin_tau_2]
type = MaterialStdVectorAux
variable = twin_tau_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[twin_tau_3]
type = MaterialStdVectorAux
variable = twin_tau_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '-1.0e-3*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.08e5 6.034e4 6.034e4 1.08e5 6.03e4 1.08e5 2.86e4 2.86e4 2.86e4' #Tallon and Wolfenden. J. Phys. Chem. Solids (1979)
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_only_xtalpl'
tan_mod_type = exact
[]
[twin_only_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
number_slip_systems = 4
slip_sys_file_name = 'select_twin_systems_verify_hardening.txt'
initial_twin_lattice_friction = 6.0
non_coplanar_coefficient_twin_hardening = 8e4
non_coplanar_twin_hardening_exponent = 0.1
coplanar_coefficient_twin_hardening = 0
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[twin_resistance_0]
type = ElementAverageValue
variable = twin_resistance_0
[]
[twin_resistance_1]
type = ElementAverageValue
variable = twin_resistance_1
[]
[twin_resistance_2]
type = ElementAverageValue
variable = twin_resistance_2
[]
[twin_resistance_3]
type = ElementAverageValue
variable = twin_resistance_3
[]
[twin_volume_fraction_0]
type = ElementAverageValue
variable = twin_volume_fraction_0
[]
[twin_volume_fraction_1]
type = ElementAverageValue
variable = twin_volume_fraction_1
[]
[twin_volume_fraction_2]
type = ElementAverageValue
variable = twin_volume_fraction_2
[]
[twin_volume_fraction_3]
type = ElementAverageValue
variable = twin_volume_fraction_3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 1e-6
dtmax = 10.0
num_steps = 4
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/bicrystal_test.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[copper]
type = GeneratedMeshGenerator
dim = 3
elem_type = HEX8
[]
[copper_id]
type = SubdomainIDGenerator
input = copper
subdomain_id = 0
[]
[brass]
type = GeneratedMeshGenerator
dim = 3
zmax = 2
zmin = 1
elem_type = HEX8
[]
[brass_id]
type = SubdomainIDGenerator
input = brass
subdomain_id = 1
[]
[sticher]
type = StitchedMeshGenerator
inputs = 'copper_id brass_id'
stitch_boundaries_pairs = 'front back'
prevent_boundary_ids_overlap = false
[]
[]
[AuxVariables]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[copper_gss]
order = CONSTANT
family = MONOMIAL
block = 0
[]
[copper_slip_increment]
order = CONSTANT
family = MONOMIAL
block = 0
[]
[brass_gss]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[brass_slip_increment]
order = CONSTANT
family = MONOMIAL
block = 1
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[copper]
strain = FINITE
incremental = true
add_variables = true
generate_output = stress_zz
block = 0
base_name = copper
[]
[brass]
strain = FINITE
incremental = true
add_variables = true
generate_output = stress_zz
block = 1
base_name = brass
[]
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss_copper]
type = MaterialStdVectorAux
variable = copper_gss
property = copper_slip_resistance
index = 0
block = 0
execute_on = timestep_end
[]
[slip_inc_copper]
type = MaterialStdVectorAux
variable = copper_slip_increment
property = copper_slip_increment
index = 0
block = 0
execute_on = timestep_end
[]
[gss_brass]
type = MaterialStdVectorAux
variable = brass_gss
property = brass_slip_resistance
index = 0
block = 1
execute_on = timestep_end
[]
[slip_inc_brass]
type = MaterialStdVectorAux
variable = brass_slip_increment
property = brass_slip_increment
index = 0
block = 1
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor_copper]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
base_name = copper
block = 0
[]
[stress_copper]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl_copper'
tan_mod_type = exact
base_name = copper
block = 0
[]
[trial_xtalpl_copper]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
base_name = copper
block = 0
[]
[elasticity_tensor_brass]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
euler_angle_1 = 0.0
euler_angle_2 = 45.0
euler_angle_3 = 0.9
base_name = brass
block = 1
[]
[stress_brass]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl_brass'
tan_mod_type = exact
base_name = brass
block = 1
[]
[trial_xtalpl_brass]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
base_name = brass
block = 1
[]
[]
[Postprocessors]
[copper_stress_zz]
type = ElementAverageValue
variable = copper_stress_zz
block = 0
[]
[brass_stress_zz]
type = ElementAverageValue
variable = brass_stress_zz
block = 1
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[copper_gss]
type = ElementAverageValue
variable = copper_gss
block = 0
[]
[copper_slip_increment]
type = ElementAverageValue
variable = copper_slip_increment
block = 0
[]
[brass_gss]
type = ElementAverageValue
variable = brass_gss
block = 1
[]
[brass_slip_increment]
type = ElementAverageValue
variable = brass_slip_increment
block = 1
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 0.01
dtmax = 10.0
num_steps = 10
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/update_method_011orientation.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[lagrangian_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[lagrangian_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[lagrangian_strain_zz]
type = RankTwoAux
variable = lagrangian_strain_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[lagrangian_strain_yy]
type = RankTwoAux
rank_two_tensor = total_lagrangian_strain
variable = lagrangian_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[gss]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_increment
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.01*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
euler_angle_1 = 120.0
euler_angle_2 = 125.264
euler_angle_3 = 45.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[lagrangian_strain_yy]
type = ElementAverageValue
variable = lagrangian_strain_yy
[]
[lagrangian_strain_zz]
type = ElementAverageValue
variable = lagrangian_strain_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[slip_increment]
type = ElementAverageValue
variable = slip_increment
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 0.01
dtmax = 10.0
num_steps = 10
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/cp_eigenstrains/hcp_volumetric_eigenstrain_decrease.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[AuxVariables]
[temperature]
order = FIRST
family = LAGRANGE
[]
[e_void_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_void_yy]
order = CONSTANT
family = MONOMIAL
[]
[e_void_zz]
order = CONSTANT
family = MONOMIAL
[]
[f_void_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_4]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_9]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_14]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[AuxKernels]
[temperature]
type = FunctionAux
variable = temperature
function = '300+400*t' # temperature increases at a constant rate
execute_on = timestep_begin
[]
[e_void_xx]
type = RankTwoAux
variable = e_void_xx
rank_two_tensor = void_eigenstrain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_void_yy]
type = RankTwoAux
variable = e_void_yy
rank_two_tensor = void_eigenstrain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[e_void_zz]
type = RankTwoAux
variable = e_void_zz
rank_two_tensor = void_eigenstrain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[f_void_zz]
type = RankTwoAux
variable = f_void_zz
rank_two_tensor = volumetric_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[tau_3]
type = MaterialStdVectorAux
variable = resolved_shear_stress_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[tau_4]
type = MaterialStdVectorAux
variable = resolved_shear_stress_4
property = applied_shear_stress
index = 4
execute_on = timestep_end
[]
[tau_9]
type = MaterialStdVectorAux
variable = resolved_shear_stress_9
property = applied_shear_stress
index = 9
execute_on = timestep_end
[]
[tau_14]
type = MaterialStdVectorAux
variable = resolved_shear_stress_14
property = applied_shear_stress
index = 14
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = DirichletBC
variable = disp_z
boundary = front
value = 0
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
eigenstrain_names = void_eigenstrain
tan_mod_type = exact
maximum_substep_iteration = 5
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = hcp_aprismatic_capyramidal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e3
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '9 22' #Knezevic et al MSEA 654 (2013)
effective_shear_modulus_per_mode = '4.7e2 4.7e2' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1.25e5 2.25e7' #from Beyerlein and Tome 2008 IJP
normalized_slip_activiation_energy_per_mode = '3.73e-3 3.2e-2' #from Beyerlein and Tome 2008 IJP
slip_energy_proportionality_factor_per_mode = '330 100' #from Beyerlein and Tome 2008 IJP
substructure_rate_coefficient_per_mode = '355 0.4' #from Capolungo et al MSEA (2009)
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0.2 0.2' #Estimated to match graph in Capolungo et al MSEA (2009), Figure 2
grain_size = 20.0e-3 #20 microns, Beyerlein and Tome IJP (2008)
[]
[void_eigenstrain]
type = ComputeCrystalPlasticityVolumetricEigenstrain
eigenstrain_name = void_eigenstrain
deformation_gradient_name = volumetric_deformation_gradient
mean_spherical_void_radius = void_radius
spherical_void_number_density = void_density
[]
[void_radius]
type = ParsedMaterial
property_name = void_radius
coupled_variables = temperature
expression = 'if(temperature<321.0, 1.0e-5, (1.0e-5 - 5.0e-8 * (temperature - 320)))' #mm
[]
[void_density]
type = GenericConstantMaterial
prop_names = void_density
prop_values = '1.0e8' ###1/mm^3
[]
[]
[Postprocessors]
[e_void_xx]
type = ElementAverageValue
variable = e_void_xx
[]
[e_void_yy]
type = ElementAverageValue
variable = e_void_yy
[]
[e_void_zz]
type = ElementAverageValue
variable = e_void_zz
[]
[f_void_zz]
type = ElementAverageValue
variable = f_void_zz
[]
[void_density]
type = ElementAverageMaterialProperty
mat_prop = void_density
execute_on = TIMESTEP_END
[]
[void_radius]
type = ElementAverageMaterialProperty
mat_prop = void_radius
execute_on = TIMESTEP_END
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[tau_3]
type = ElementAverageValue
variable = resolved_shear_stress_3
[]
[tau_4]
type = ElementAverageValue
variable = resolved_shear_stress_4
[]
[tau_9]
type = ElementAverageValue
variable = resolved_shear_stress_9
[]
[tau_14]
type = ElementAverageValue
variable = resolved_shear_stress_14
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 1e-4
num_steps = 10
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_cutback.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
nss = 12
num_slip_sys_flowrate_props = 2 #Number of properties in a slip system
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
hprops = '1.0 541.5 60.8 109.8 2.5'
gprops = '1 4 60.8 5 8 60.8 9 12 60.8'
tan_mod_type = exact
gen_random_stress_flag = true
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
block = 'ANY_BLOCK_ID 0'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_factor_shift_type'
petsc_options_value = 'nonzero'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 1.0
dtmax = 10.0
dtmin = 1e-5
num_steps = 3
snesmf_reuse_base = false
[]
[Outputs]
file_base = crysp_cutback_out
exodus = true
csv = true
gnuplot = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/save_euler.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 2
ny = 2
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[GlobalParams]
volumetric_locking_correction = true
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[./euler1]
order = CONSTANT
family = MONOMIAL
[../]
[./euler2]
order = CONSTANT
family = MONOMIAL
[../]
[./euler3]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'euler_ang_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 3
read_type = element
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = lage
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = fp
index_j = 1
index_i = 1
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[./euler1]
type = MaterialRealVectorValueAux
variable = euler1
property = Euler_angles
component = 0
execute_on = timestep_end
[../]
[./euler2]
type = MaterialRealVectorValueAux
variable = euler2
property = Euler_angles
component = 1
execute_on = timestep_end
[../]
[./euler3]
type = MaterialRealVectorValueAux
variable = euler3
property = Euler_angles
component = 2
execute_on = timestep_end
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
displacements = 'disp_x disp_y'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
[../]
[./fp_yy]
type = ElementAverageValue
variable = fp_yy
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.01
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.01
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_twinning/demonstration_combined_hcp_slip_twins.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[single_xtal]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[temperature]
[]
[pk2]
order = CONSTANT
family = MONOMIAL
[]
[fp_xx]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_3]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_9]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_3]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_9]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_3]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_9]
order = CONSTANT
family = MONOMIAL
[]
[resolved_twin_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[twin_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[temperature]
type = ConstantAux
variable = temperature
value= 300
[]
[pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_xx]
type = RankTwoAux
variable = fp_xx
rank_two_tensor = plastic_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = twin_total_volume_fraction_twins
execute_on = timestep_end
[]
[slip_increment_0]
type = MaterialStdVectorAux
variable = slip_increment_0
property = slip_increment
index = 0
execute_on = timestep_end
[]
[slip_increment_3]
type = MaterialStdVectorAux
variable = slip_increment_3
property = slip_increment
index = 3
execute_on = timestep_end
[]
[slip_increment_9]
type = MaterialStdVectorAux
variable = slip_increment_9
property = slip_increment
index = 9
execute_on = timestep_end
[]
[tau_3]
type = MaterialStdVectorAux
variable = resolved_shear_stress_3
property = applied_shear_stress
index = 3
execute_on = timestep_end
[]
[tau_9]
type = MaterialStdVectorAux
variable = resolved_shear_stress_9
property = applied_shear_stress
index = 9
execute_on = timestep_end
[]
[slip_resistance_0]
type = MaterialStdVectorAux
variable = slip_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_resistance_3]
type = MaterialStdVectorAux
variable = slip_resistance_3
property = slip_resistance
index = 3
execute_on = timestep_end
[]
[slip_resistance_9]
type = MaterialStdVectorAux
variable = slip_resistance_9
property = slip_resistance
index = 9
execute_on = timestep_end
[]
[twin_tau_0]
type = MaterialStdVectorAux
variable = resolved_twin_stress_0
property = twin_applied_shear_stress
index = 0
execute_on = timestep_end
[]
[twin_resistance_0]
type = MaterialStdVectorAux
variable = twin_resistance_0
property = twin_slip_resistance
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = disp_y
preset = true
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.005*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'slip_xtalpl twin_xtalpl'
tan_mod_type = exact
[]
[slip_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 15
slip_sys_file_name = 'hcp_aprismatic_capyramidal_slip_sys.txt'
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
zero_tol = 5e-10
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0e3
slip_system_modes = 2
number_slip_systems_per_mode = '3 12'
lattice_friction_per_mode = '98 224' #Knezevic et al MSEA 654 (2013)
effective_shear_modulus_per_mode = '4.7e4 4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7 6.586e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '1.25e5 2.25e7' #from Beyerlein and Tome 2008 IJP
normalized_slip_activiation_energy_per_mode = '3.73e-3 3.2e-2' #from Beyerlein and Tome 2008 IJP
slip_energy_proportionality_factor_per_mode = '330 100' #from Beyerlein and Tome 2008 IJP
substructure_rate_coefficient_per_mode = '355 0.4' #from Capolungo et al MSEA (2009)
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0.2 0.2' #Estimated to match graph in Capolungo et al MSEA (2009), Figure 2
grain_size = 20.0e-3 #20 microns, Beyerlein and Tome IJP (2008)
total_twin_volume_fraction = twin_total_volume_fraction_twins
[]
[twin_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
base_name = twin
crystal_lattice_type = HCP
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
number_slip_systems = 6
slip_sys_file_name = 'hcp_tensile_twin_systems.txt'
initial_twin_lattice_friction = 1140.0
non_coplanar_coefficient_twin_hardening = 10000
coplanar_coefficient_twin_hardening = 1000
characteristic_twin_shear = 0.167
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2]
type = ElementAverageValue
variable = pk2
[]
[fp_xx]
type = ElementAverageValue
variable = fp_xx
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[slip_increment_0]
type = ElementAverageValue
variable = slip_increment_0
[]
[slip_increment_3]
type = ElementAverageValue
variable = slip_increment_3
[]
[slip_increment_9]
type = ElementAverageValue
variable = slip_increment_9
[]
[tau_3]
type = ElementAverageValue
variable = resolved_shear_stress_3
[]
[tau_9]
type = ElementAverageValue
variable = resolved_shear_stress_9
[]
[slip_resistance_0]
type = ElementAverageValue
variable = slip_resistance_0
[]
[slip_resistance_3]
type = ElementAverageValue
variable = slip_resistance_3
[]
[slip_resistance_9]
type = ElementAverageValue
variable = slip_resistance_9
[]
[twin_tau_0]
type = ElementAverageValue
variable = resolved_twin_stress_0
[]
[twin_resistance_0]
type = ElementAverageValue
variable = twin_resistance_0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_rel_tol = 1e-12
nl_abs_step_tol = 1e-10
dt = 0.5
dtmin = 1.0e-2
dtmax = 10.0
end_time = 2.25
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/patch_recovery.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
displacements = 'ux uy'
[]
[Variables]
[ux]
[]
[uy]
[]
[]
[AuxVariables]
[stress_xx_recovered]
order = FIRST
family = LAGRANGE
[]
[stress_yy_recovered]
order = FIRST
family = LAGRANGE
[]
[]
[Functions]
[tdisp]
type = ParsedFunction
expression = 0.01*t
[]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy'
use_displaced_mesh = true
[]
[]
[AuxKernels]
[stress_xx_recovered]
type = NodalPatchRecoveryAux
variable = stress_xx_recovered
nodal_patch_recovery_uo = stress_xx_patch
execute_on = 'TIMESTEP_END'
[]
[stress_yy_recovered]
type = NodalPatchRecoveryAux
variable = stress_yy_recovered
nodal_patch_recovery_uo = stress_yy_patch
execute_on = 'TIMESTEP_END'
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = uy
boundary = top
function = tdisp
[]
[]
[UserObjects]
[slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[]
[slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[]
[state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[]
[state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[]
[stress_xx_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '0 0'
execute_on = 'TIMESTEP_END'
[]
[stress_yy_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '1 1'
execute_on = 'TIMESTEP_END'
[]
[]
[Materials]
[crysp]
type = FiniteStrainUObasedCP
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[]
[strain]
type = ComputeFiniteStrain
displacements = 'ux uy'
[]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.05
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/monolithic_material_based/crysp_fileread.i)
[Mesh]
type = GeneratedMesh
dim = 3
nx=1
ny=1
nz=1
xmin=0.0
xmax=1.0
ymin=0.0
ymax=1.0
zmin=0.0
zmax=1.0
elem_type = HEX8
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[./disp_z]
block = 0
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./gss1]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.01*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y disp_z'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = 'initial timestep_end'
block = 0
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
block = 0
[../]
[./gss1]
type = MaterialStdVectorAux
variable = gss1
property = gss
index = 0
execute_on = 'initial timestep_end'
block = 0
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = disp_z
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = tdisp
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
gtol = 1e-2
slip_sys_file_name = input_slip_sys.txt
slip_sys_res_prop_file_name = input_slip_sys_res.txt
slip_sys_flow_prop_file_name = input_slip_sys_flow_prop.txt
hprops = '1.0 541.5 60.8 109.8 2.5'
nss = 12
intvar_read_type = slip_sys_res_file
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y disp_z'
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
execute_on = 'initial timestep_end'
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
execute_on = 'initial timestep_end'
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
execute_on = 'initial timestep_end'
[../]
[./gss1]
type = ElementAverageValue
variable = gss1
execute_on = 'initial timestep_end'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 0.05
dtmax = 10.0
dtmin = 0.05
num_steps = 10
[]
[Outputs]
file_base = crysp_fileread_out
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/twinning/upper_twin_fraction_limit.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
elem_type = HEX8
[]
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_twin_volume_fraction]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_4]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_10]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_4]
order = CONSTANT
family = MONOMIAL
[]
[twin_volume_fraction_10]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[total_twin_volume_fraction]
type = MaterialRealAux
variable = total_twin_volume_fraction
property = total_volume_fraction_twins
execute_on = timestep_end
[]
[slip_increment_4]
type = MaterialStdVectorAux
variable = slip_increment_4
property = slip_increment
index = 4
execute_on = timestep_end
[]
[slip_increment_10]
type = MaterialStdVectorAux
variable = slip_increment_10
property = slip_increment
index = 10
execute_on = timestep_end
[]
[twin_volume_fraction_4]
type = MaterialStdVectorAux
variable = twin_volume_fraction_4
property = twin_system_volume_fraction
index = 4
execute_on = timestep_end
[]
[twin_volume_fraction_10]
type = MaterialStdVectorAux
variable = twin_volume_fraction_10
property = twin_system_volume_fraction
index = 10
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '5.0e-4*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.08e5 6.034e4 6.034e4 1.08e5 6.03e4 1.08e5 2.86e4 2.86e4 2.86e4' #Tallon and Wolfenden. J. Phys. Chem. Solids (1979)
fill_method = symmetric9
euler_angle_1 = 54.74
euler_angle_2 = 45.0
euler_angle_3 = 270.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'twin_only_xtalpl'
tan_mod_type = exact
[]
[twin_only_xtalpl]
type = CrystalPlasticityTwinningKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = 'fcc_input_twinning_systems.txt'
initial_twin_lattice_friction = 1.5
upper_limit_twin_volume_fraction = 1e-7
stol = 0.01
print_state_variable_convergence_error_messages = true
[]
[]
[Postprocessors]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[total_twin_volume_fraction]
type = ElementAverageValue
variable = total_twin_volume_fraction
[]
[slip_increment_4]
type = ElementAverageValue
variable = slip_increment_4
[]
[slip_increment_10]
type = ElementAverageValue
variable = slip_increment_10
[]
[twin_volume_fraction_4]
type = ElementAverageValue
variable = twin_volume_fraction_4
[]
[twin_volume_fraction_10]
type = ElementAverageValue
variable = twin_volume_fraction_10
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.05
dtmin = 1e-5
end_time = 0.18
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/hcp_single_crystal/update_method_hcp_basal_active.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
[cube]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
elem_type = HEX8
[]
[]
[AuxVariables]
[temperature]
[]
[pk2_zz]
order = CONSTANT
family = MONOMIAL
[]
[fp_xx]
order = CONSTANT
family = MONOMIAL
[]
[fp_yy]
order = CONSTANT
family = MONOMIAL
[]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_xx]
order = CONSTANT
family = MONOMIAL
[]
[e_yy]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_increment_1]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_0]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_1]
order = CONSTANT
family = MONOMIAL
[]
[resolved_shear_stress_2]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_0]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_1]
order = CONSTANT
family = MONOMIAL
[]
[slip_resistance_2]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[temperature]
type = ConstantAux
variable = temperature
value= 300
[]
[pk2_zz]
type = RankTwoAux
variable = pk2_zz
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[fp_xx]
type = RankTwoAux
variable = fp_xx
rank_two_tensor = plastic_deformation_gradient
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[fp_yy]
type = RankTwoAux
variable = fp_yy
rank_two_tensor = plastic_deformation_gradient
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_xx]
type = RankTwoAux
variable = e_xx
rank_two_tensor = total_lagrangian_strain
index_j = 0
index_i = 0
execute_on = timestep_end
[]
[e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = total_lagrangian_strain
index_j = 1
index_i = 1
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[slip_increment_0]
type = MaterialStdVectorAux
variable = slip_increment_0
property = slip_increment
index = 0
execute_on = timestep_end
[]
[slip_increment_1]
type = MaterialStdVectorAux
variable = slip_increment_1
property = slip_increment
index = 1
execute_on = timestep_end
[]
[tau_0]
type = MaterialStdVectorAux
variable = resolved_shear_stress_0
property = applied_shear_stress
index = 0
execute_on = timestep_end
[]
[tau_1]
type = MaterialStdVectorAux
variable = resolved_shear_stress_1
property = applied_shear_stress
index = 1
execute_on = timestep_end
[]
[tau_2]
type = MaterialStdVectorAux
variable = resolved_shear_stress_2
property = applied_shear_stress
index = 2
execute_on = timestep_end
[]
[slip_resistance_0]
type = MaterialStdVectorAux
variable = slip_resistance_0
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[slip_resistance_1]
type = MaterialStdVectorAux
variable = slip_resistance_1
property = slip_resistance
index = 1
execute_on = timestep_end
[]
[slip_resistance_2]
type = MaterialStdVectorAux
variable = slip_resistance_2
property = slip_resistance
index = 2
execute_on = timestep_end
[]
[]
[BCs]
[fix_y]
type = DirichletBC
variable = disp_y
preset = true
boundary = 'bottom'
value = 0
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '0.001*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.622e5 9.18e4 6.88e4 1.622e5 6.88e4 1.805e5 4.67e4 4.67e4 4.67e4' #alpha Ti, Alankar et al. Acta Materialia 59 (2011) 7003-7009
fill_method = symmetric9
# orient in approximately [011] to activate the basal slip planes
euler_angle_1 = 120.0
euler_angle_2 = 125.264
euler_angle_3 = 45.0
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
[]
[trial_xtalpl]
type = CrystalPlasticityHCPDislocationSlipBeyerleinUpdate
number_slip_systems = 3
slip_sys_file_name = hcp_basal_slip_sys.txt
unit_cell_dimension = '2.934e-7 2.934e-7 4.657e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
temperature = temperature
initial_forest_dislocation_density = 15.0e5
initial_substructure_density = 1.0e3
slip_system_modes = 1
number_slip_systems_per_mode = '3'
lattice_friction_per_mode = '98' #Knezevic et al MSEA 654 (2013)
effective_shear_modulus_per_mode = '4.7e4' #Ti, in MPa, https://materialsproject.org/materials/mp-46/
burgers_vector_per_mode = '2.934e-7' #Ti, in mm, https://materialsproject.org/materials/mp-46/
slip_generation_coefficient_per_mode = '5.7e6' #from Knezevic et al. 2015 AM
normalized_slip_activiation_energy_per_mode = '0.002' #from Knezevic et al. 2015 AM
slip_energy_proportionality_factor_per_mode = '700' ##from Knezevic et al. 2015 AM
substructure_rate_coefficient_per_mode = '355' #from Capolungo et al MSEA (2009)
applied_strain_rate = 0.001
gamma_o = 1.0e-3
Hall_Petch_like_constant_per_mode = '0.2' #Estimated to match graph in Capolungo et al MSEA (2009), Figure 2
grain_size = 20.0e-3 #20 microns, Beyerlein and Tome IJP (2008)
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[pk2_zz]
type = ElementAverageValue
variable = pk2_zz
[]
[fp_xx]
type = ElementAverageValue
variable = fp_xx
[]
[fp_yy]
type = ElementAverageValue
variable = fp_yy
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_xx]
type = ElementAverageValue
variable = e_xx
[]
[e_yy]
type = ElementAverageValue
variable = e_yy
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[slip_increment_0]
type = ElementAverageValue
variable = slip_increment_0
[]
[slip_increment_1]
type = ElementAverageValue
variable = slip_increment_1
[]
[tau_0]
type = ElementAverageValue
variable = resolved_shear_stress_0
[]
[tau_1]
type = ElementAverageValue
variable = resolved_shear_stress_1
[]
[tau_2]
type = ElementAverageValue
variable = resolved_shear_stress_2
[]
[slip_resistance_0]
type = ElementAverageValue
variable = slip_resistance_0
[]
[slip_resistance_1]
type = ElementAverageValue
variable = slip_resistance_1
[]
[slip_resistance_2]
type = ElementAverageValue
variable = slip_resistance_2
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.5
dtmin = 1.0e-2
dtmax = 10.0
end_time = 2.5
[]
[Outputs]
csv = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/user_object_based/exception.i)
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[Variables]
[./ux]
[../]
[./uy]
[../]
[./uz]
[../]
[]
[AuxVariables]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./pk2]
order = CONSTANT
family = MONOMIAL
[../]
[./fp_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./rotout]
order = CONSTANT
family = MONOMIAL
[../]
[./e_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./gss]
order = CONSTANT
family = MONOMIAL
[../]
[./slip_increment]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.1*t
[../]
[]
[Kernels]
[SolidMechanics]
displacements = 'ux uy uz'
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./pk2]
type = RankTwoAux
variable = pk2
rank_two_tensor = pk2
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = fp
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = lage
index_j = 2
index_i = 2
execute_on = timestep_end
[../]
[./gss]
type = MaterialStdVectorAux
variable = gss
property = state_var_gss
index = 0
execute_on = timestep_end
[../]
[./slip_inc]
type = MaterialStdVectorAux
variable = slip_increment
property = slip_rate_gss
index = 0
execute_on = timestep_end
[../]
[]
[BCs]
[./symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[../]
[./symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[../]
[./symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[../]
[]
[UserObjects]
[./slip_rate_gss]
type = CrystalPlasticitySlipRateGSS
variable_size = 12
slip_sys_file_name = input_slip_sys.txt
num_slip_sys_flowrate_props = 2
flowprops = '1 4 0.001 0.1 5 8 0.001 0.1 9 12 0.001 0.1'
uo_state_var_name = state_var_gss
[../]
[./slip_resistance_gss]
type = CrystalPlasticitySlipResistanceGSS
variable_size = 12
uo_state_var_name = state_var_gss
[../]
[./state_var_gss]
type = CrystalPlasticityStateVariable
variable_size = 12
groups = '0 4 8 12'
group_values = '60.8 60.8 60.8'
uo_state_var_evol_rate_comp_name = state_var_evol_rate_comp_gss
scale_factor = 1.0
[../]
[./state_var_evol_rate_comp_gss]
type = CrystalPlasticityStateVarRateComponentGSS
variable_size = 12
hprops = '1.0 541.5 109.8 2.5'
uo_slip_rate_name = slip_rate_gss
uo_state_var_name = state_var_gss
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainUObasedCP
block = 0
stol = 1e-2
tan_mod_type = exact
uo_slip_rates = 'slip_rate_gss'
uo_slip_resistances = 'slip_resistance_gss'
uo_state_vars = 'state_var_gss'
uo_state_var_evol_rate_comps = 'state_var_evol_rate_comp_gss'
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'ux uy uz'
[../]
[./elasticity_tensor]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[../]
[]
[Postprocessors]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./pk2]
type = ElementAverageValue
variable = pk2
[../]
[./fp_zz]
type = ElementAverageValue
variable = fp_zz
[../]
[./e_zz]
type = ElementAverageValue
variable = e_zz
[../]
[./gss]
type = ElementAverageValue
variable = gss
[../]
[./slip_increment]
type = ElementAverageValue
variable = slip_increment
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.01
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/linesearch.i)
[GlobalParams]
displacements = 'ux uy uz'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[fp_zz]
order = CONSTANT
family = MONOMIAL
[]
[e_zz]
order = CONSTANT
family = MONOMIAL
[]
[gss]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[tdisp]
type = ParsedFunction
expression = 0.01*t
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
generate_output = stress_zz
[]
[AuxKernels]
[fp_zz]
type = RankTwoAux
variable = fp_zz
rank_two_tensor = plastic_deformation_gradient
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[e_zz]
type = RankTwoAux
variable = e_zz
rank_two_tensor = total_lagrangian_strain
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[gss1]
type = MaterialStdVectorAux
variable = gss
property = slip_resistance
index = 0
execute_on = timestep_end
[]
[]
[BCs]
[symmy]
type = DirichletBC
variable = uy
boundary = bottom
value = 0
[]
[symmx]
type = DirichletBC
variable = ux
boundary = left
value = 0
[]
[symmz]
type = DirichletBC
variable = uz
boundary = back
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = uz
boundary = front
function = tdisp
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
maximum_substep_iteration = 200
use_line_search = true
min_line_search_step_size = 0.01
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
resistance_tol = 0.01
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
[]
[fp_zz]
type = ElementAverageValue
variable = fp_zz
[]
[e_zz]
type = ElementAverageValue
variable = e_zz
[]
[gss]
type = ElementAverageValue
variable = gss
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
dt = 0.05
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.02
num_steps = 10
nl_abs_step_tol = 1e-10
[]
[Outputs]
exodus = true
[]
(modules/solid_mechanics/test/tests/elem_prop_read_user_object/prop_elem_read.i)
[Mesh]
type = GeneratedMesh
dim = 2
elem_type = QUAD4
displacements = 'disp_x disp_y'
nx = 2
ny = 2
[]
[Variables]
[./disp_x]
block = 0
[../]
[./disp_y]
block = 0
[../]
[]
[GlobalParams]
volumetric_locking_correction=true
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[./e_yy]
order = CONSTANT
family = MONOMIAL
block = 0
[../]
[]
[Functions]
[./tdisp]
type = ParsedFunction
expression = 0.05*t
[../]
[]
[UserObjects]
[./prop_read]
type = PropertyReadFile
prop_file_name = 'input_file.txt'
# Enter file data as prop#1, prop#2, .., prop#nprop
nprop = 4
read_type = element
[../]
[]
[AuxKernels]
[./stress_yy]
type = RankTwoAux
variable = stress_yy
rank_two_tensor = stress
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[./e_yy]
type = RankTwoAux
variable = e_yy
rank_two_tensor = elastic_strain
index_j = 1
index_i = 1
execute_on = timestep_end
block = 0
[../]
[]
[BCs]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[../]
[./tdisp]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = tdisp
[../]
[]
[Materials]
[./elasticity_tensor_with_Euler]
type = ComputeElasticityTensorCP
block = 0
C_ijkl = '1.684e5 0.176e5 0.176e5 1.684e5 0.176e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
read_prop_user_object = prop_read
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y'
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 0
[../]
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
block = 'ANY_BLOCK_ID 0'
[../]
[./e_yy]
type = ElementAverageValue
variable = e_yy
block = 'ANY_BLOCK_ID 0'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.05
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
nl_abs_tol = 1e-10
nl_rel_step_tol = 1e-10
dtmax = 10.0
nl_rel_tol = 1e-10
end_time = 1
dtmin = 0.05
num_steps = 1
nl_abs_step_tol = 1e-10
[]
[Outputs]
file_base = prop_elem_read_out
exodus = true
[]
[Kernels]
[SolidMechanics]
displacements = 'disp_x disp_y'
use_displaced_mesh = true
[../]
[]
(modules/solid_mechanics/test/tests/crystal_plasticity/stress_update_material_based/rotation_matrix_update_euler_angle_111_orientation.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
elem_type = HEX8
[]
[AuxVariables]
[euler_angle_1]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_2]
order = CONSTANT
family = MONOMIAL
[]
[euler_angle_3]
order = CONSTANT
family = MONOMIAL
[]
[pk2_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
incremental = true
add_variables = true
[]
[AuxKernels]
[euler_angle_1]
type = MaterialRealVectorValueAux
variable = euler_angle_1
property = updated_Euler_angle
component = 0
execute_on = timestep_end
[]
[euler_angle_2]
type = MaterialRealVectorValueAux
variable = euler_angle_2
property = updated_Euler_angle
component = 1
execute_on = timestep_end
[]
[euler_angle_3]
type = MaterialRealVectorValueAux
variable = euler_angle_3
property = updated_Euler_angle
component = 2
execute_on = timestep_end
[]
[pk2_zz]
type = RankTwoAux
variable = pk2_zz
rank_two_tensor = second_piola_kirchhoff_stress
index_j = 2
index_i = 2
execute_on = timestep_end
[]
[]
[BCs]
[Periodic]
[all]
variable = 'disp_x'
auto_direction = 'z'
[]
[]
[fix_x]
type = DirichletBC
variable = disp_x
boundary = 'left'
value = 0
[]
[fix_y]
type = DirichletBC
variable = disp_y
boundary = 'bottom'
value = 0
[]
[fix_z]
type = DirichletBC
variable = disp_z
boundary = 'back'
value = 0
[]
[tdisp]
type = FunctionDirichletBC
variable = disp_z
boundary = 'front'
function = '0.005*t'
[]
[]
[Materials]
[elasticity_tensor]
type = ComputeElasticityTensorCP
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 0.754e5 0.754e5 0.754e5'
fill_method = symmetric9
rotation_matrix = '0.707106781 0.40824829 0.57735027
-0.707106781 0.40824829 0.57735027
0. -0.81649658 0.57735027'
[]
[stress]
type = ComputeMultipleCrystalPlasticityStress
crystal_plasticity_models = 'trial_xtalpl'
tan_mod_type = exact
maximum_substep_iteration = 4
[]
[trial_xtalpl]
type = CrystalPlasticityKalidindiUpdate
number_slip_systems = 12
slip_sys_file_name = input_slip_sys.txt
[]
[updated_euler_angle]
type = ComputeUpdatedEulerAngle
radian_to_degree = true
[]
[]
[Postprocessors]
[euler_angle_1]
type = ElementAverageValue
variable = euler_angle_1
[]
[euler_angle_2]
type = ElementAverageValue
variable = euler_angle_2
[]
[euler_angle_3]
type = ElementAverageValue
variable = euler_angle_3
[]
[pk2_zz]
type = ElementAverageValue
variable = pk2_zz
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = ' lu '
nl_abs_tol = 1e-10
nl_rel_tol = 1e-10
nl_abs_step_tol = 1e-10
dt = 0.1
dtmin = 0.01
end_time = 5
[]
[Outputs]
csv = true
perf_graph = true
[]