- variableThe variable this initial condition is supposed to provide values for.
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The variable this initial condition is supposed to provide values for.
- x_valueThe x value to be set in IC
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The x value to be set in IC
VectorConstantIC
The VectorConstantIC class is used to set initial values of components of a vector variable. The x component can be set through the x_value parameter, the y component through y_value, and the z component through z_value. Note that x_value is required. If y_value or z_value are not supplied, they are defaulted to zero.
Sets constant component values for a vector field variable.
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
- y_value0The y value to be set in IC
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The y value to be set in IC
- z_value0The z value to be set in IC
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The z value to be set in IC
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set the enabled status of the MooseObject.
- ignore_uo_dependencyFalseWhen set to true, a UserObject retrieved by this IC will not be executed before the this IC
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When set to true, a UserObject retrieved by this IC will not be executed before the this IC
Advanced Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp_transient.i)
- (test/tests/ics/vector_constant_ic/vector_constant_ic.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_no_parts_steady_stabilized_second_order.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp.i)
- (modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady-var.i)
- (modules/navier_stokes/test/tests/finite_element/ins/boussinesq/boussinesq_stabilized.i)
- (modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_by_parts_traction_steady_stabilized.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_no_parts_steady_stabilized.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_stab_jac_test.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad-rz-displacements.i)
- (modules/navier_stokes/test/tests/finite_element/ins/wall_convection/steady.i)
- (modules/navier_stokes/test/tests/finite_element/ins/coupled-force/gravity-through-coupled-force-action.i)
- (modules/navier_stokes/test/tests/finite_element/ins/coupled-force/steady.i)
- (test/tests/kernels/transient_vector_diffusion/transient_vector_diffusion.i)
- (test/tests/kernels/ad_transient_diffusion/ad_transient_vector_diffusion.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/mixed-transient-steady/mixed.i)
- (modules/navier_stokes/test/tests/finite_element/ins/coupled-force/gravity-through-coupled-force.i)
- (modules/navier_stokes/test/tests/finite_element/ins/coupled-force/steady-function.i)
- (modules/fsi/test/tests/2d-finite-strain-steady/thermal-me.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_by_parts_steady_stabilized_second_order.i)
- (modules/navier_stokes/test/tests/finite_element/ins/boussinesq/benchmark/benchmark.i)
- (modules/navier_stokes/test/tests/finite_element/ins/coupled-force/gravity-object.i)
- (modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_by_parts_steady_stabilized.i)
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp_transient.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature]
[InitialCondition]
type = ConstantIC
value = 1.0
[]
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[temperature_time]
type = INSADHeatConductionTimeDerivative
variable = temperature
[]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(test/tests/ics/vector_constant_ic/vector_constant_ic.i)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
[]
[Problem]
solve = false
kernel_coverage_check = false
[]
[Variables]
[./A]
family = LAGRANGE_VEC
order = FIRST
[../]
[]
[ICs]
[./A]
type = VectorConstantIC
variable = A
x_value = 2
y_value = 3
z_value = 4
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_no_parts_steady_stabilized_second_order.i)
[GlobalParams]
order = SECOND
integrate_p_by_parts = false
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[AuxVariables]
[vel_x]
[]
[vel_y]
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
order = FIRST
[../]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[../]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[p_corner]
type = DirichletBC
boundary = top_right
value = 0
variable = p
[]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 'inlet_func'
[../]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
expression = '-4 * x^2 + 1'
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
console = true
[./out]
type = Exodus
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
execute_on = 'timestep_end'
[../]
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady-var.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[AuxVariables]
[u]
initial_condition = 1
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_source]
type = INSADEnergySource
variable = temperature
source_variable = u
[]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
[out]
type = Exodus
hide = 'u'
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/boussinesq/boussinesq_stabilized.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmax = .05
ymax = .05
nx = 20
ny = 20
elem_type = QUAD9
[]
[./bottom_left]
type = ExtraNodesetGenerator
new_boundary = corner
coord = '0 0'
input = gen
[../]
[]
[Preconditioning]
[./Newton_SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-12
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'bjacobi lu NONZERO 200'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[out]
type = Exodus
execute_on = 'final'
[]
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
[]
[p][]
[temp]
initial_condition = 340
scaling = 1e-4
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[BCs]
[./velocity_dirichlet]
type = VectorDirichletBC
boundary = 'left right bottom top'
variable = velocity
# The third entry is to satisfy RealVectorValue
values = '0 0 0'
[../]
# Even though we are integrating by parts, because there are no integrated
# boundary conditions on the velocity p doesn't appear in the system of
# equations. Thus we must pin the pressure somewhere in order to ensure a
# unique solution
[./p_zero]
type = DirichletBC
boundary = corner
variable = p
value = 0
[../]
[./cold]
type = DirichletBC
variable = temp
boundary = left
value = 300
[../]
[./hot]
type = DirichletBC
variable = temp
boundary = right
value = 400
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[]
[./buoyancy]
type = INSADBoussinesqBodyForce
variable = velocity
temperature = temp
gravity = '0 -9.81 0'
[../]
[./gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 -9.81 0'
[../]
[supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[temp_advection]
type = INSADEnergyAdvection
variable = temp
[]
[temp_conduction]
type = ADHeatConduction
variable = temp
thermal_conductivity = 'k'
[../]
[temp_supg]
type = INSADEnergySUPG
variable = temp
velocity = velocity
[]
[]
[Materials]
[./ad_const]
type = ADGenericConstantMaterial
# alpha = coefficient of thermal expansion where rho = rho0 -alpha * rho0 * delta T
prop_names = 'mu rho alpha k cp'
prop_values = '30.74e-6 .5757 2.9e-3 46.38e-3 1054'
[../]
[./const]
type = GenericConstantMaterial
prop_names = 'temp_ref'
prop_values = '900'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temp
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_source]
type = INSADEnergySource
variable = temperature
source_function = 1
[]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_by_parts_traction_steady_stabilized.i)
[GlobalParams]
order = FIRST
integrate_p_by_parts = true
viscous_form = 'traction'
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[AuxVariables]
[vel_x]
[]
[vel_y]
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[../]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 'inlet_func'
[../]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
expression = '-4 * x^2 + 1'
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
console = true
[./out]
type = Exodus
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
execute_on = 'timestep_end'
[../]
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_no_parts_steady_stabilized.i)
[GlobalParams]
order = FIRST
integrate_p_by_parts = false
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[AuxVariables]
[vel_x]
[]
[vel_y]
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[../]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[p_corner]
type = DirichletBC
boundary = top_right
value = 0
variable = p
[]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 'inlet_func'
[../]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
expression = '-4 * x^2 + 1'
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
console = true
[./out]
type = Exodus
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
execute_on = 'timestep_end'
[../]
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 64
ny = 64
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[AuxVariables]
[vel_x]
[]
[vel_y]
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 0
y_value = 0
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
alpha = .1
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
exodus = true
file_base = lid_driven_stabilized_out
[]
[Postprocessors]
[lin]
type = NumLinearIterations
[]
[nl]
type = NumNonlinearIterations
[]
[lin_tot]
type = CumulativeValuePostprocessor
postprocessor = 'lin'
[]
[nl_tot]
type = CumulativeValuePostprocessor
postprocessor = 'nl'
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_stab_jac_test.i)
[GlobalParams]
order = SECOND
integrate_p_by_parts = true
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = 1.1
ymin = -1.1
ymax = 1.1
elem_type = QUAD9
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Problem]
coord_type = RZ
[]
[Preconditioning]
[./SMP_PJFNK]
type = SMP
full = true
solve_type = NEWTON
[../]
[]
[Executioner]
type = Transient
num_steps = 1
dt = 1.1
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
order = FIRST
[../]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[../]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 1
[../]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[outlet]
type = INSADMomentumNoBCBC
variable = velocity
pressure = p
boundary = 'top'
[]
# When the NoBCBC is applied on the outlet boundary then there is nothing
# constraining the pressure. Thus we must pin the pressure somewhere to ensure
# that the problem is not singular. If the below BC is not applied then
# -pc_type svd -pc_svd_monitor reveals a singular value
[p_corner]
type = DirichletBC
boundary = pinned_node
value = 0
variable = p
[]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1.1 1.1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad-rz-displacements.i)
[GlobalParams]
order = FIRST
integrate_p_by_parts = true
use_displaced_mesh = true
[]
[Mesh]
file = '2d_cone.msh'
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[AuxVariables]
[vel_x][]
[vel_y][]
[disp_x]
order = SECOND
[]
[disp_y]
order = SECOND
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
[]
[p]
[]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[mass]
type = INSADMass
variable = p
[]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[]
[momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 'inlet_func'
[]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[]
[Functions]
[inlet_func]
type = ParsedFunction
expression = '-4 * x^2 + 1'
[]
[]
[Materials]
[const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
csv = true
[out]
type = Exodus
hide = 'disp_x disp_y'
[]
[]
[Postprocessors]
[flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
execute_on = 'timestep_end'
[]
[flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/wall_convection/steady.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_ambient_convection]
type = INSADEnergyAmbientConvection
variable = temperature
alpha = 1
T_ambient = 0.5
[]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/coupled-force/gravity-through-coupled-force-action.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[]
[Variables]
[u]
family = LAGRANGE_VEC
[]
[]
[AuxVariables]
[gravity]
family = LAGRANGE_VEC
[]
[]
[ICs]
[gravity]
type = VectorConstantIC
x_value = '0'
y_value = '-9.81'
variable = gravity
[]
[]
[Modules]
[IncompressibleNavierStokes]
equation_type = steady-state
velocity_boundary = 'bottom right top left'
velocity_function = '0 0 0 0 0 0 0 0'
add_standard_velocity_variables_for_ad = false
pressure_pinned_node = 0
density_name = rho
dynamic_viscosity_name = mu
use_ad = true
laplace = true
family = LAGRANGE
order = FIRST
supg = true
pspg = true
has_coupled_force = true
[]
[]
[Kernels]
[u_diff]
type = VectorDiffusion
variable = u
[]
[]
[BCs]
[u_left]
type = VectorFunctionDirichletBC
variable = u
boundary = 'left'
function_x = 1
function_y = 1
[]
[u_right]
type = VectorFunctionDirichletBC
variable = u
boundary = 'right'
function_x = -1
function_y = -1
[]
[]
[Materials]
[const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
[out]
type = Exodus
hide = 'gravity'
[]
[]
[Functions]
[vector_func]
type = ParsedVectorFunction
expression_x = '-2*x + 1'
expression_y = '-2*x + 1'
[]
[vector_gravity_func]
type = ParsedVectorFunction
expression_x = '0'
expression_y = '-9.81'
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/coupled-force/steady.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[u]
family = LAGRANGE_VEC
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[momentum_coupled_force]
type = INSADMomentumCoupledForce
variable = velocity
coupled_vector_var = u
[]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[u_diff]
type = VectorDiffusion
variable = u
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left top'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[u_left]
type = VectorFunctionDirichletBC
variable = u
boundary = 'left'
function_x = 1
function_y = 1
[]
[u_right]
type = VectorFunctionDirichletBC
variable = u
boundary = 'right'
function_x = -1
function_y = -1
[]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(test/tests/kernels/transient_vector_diffusion/transient_vector_diffusion.i)
[Mesh]
[./generator]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
[../]
[./block1]
type = SubdomainBoundingBoxGenerator
input = generator
bottom_left = '0 0 -1'
top_right = '1 1 1'
block_id = 1
[../]
[./block2]
type = SubdomainBoundingBoxGenerator
input = block1
bottom_left = '0.33 0.33 -1'
top_right = '0.67 0.67 1'
block_id = 2
[../]
[]
[Variables]
[./u]
family = LAGRANGE_VEC
[../]
[]
[ICs]
[./u]
type = VectorConstantIC
variable = u
x_value = 1
y_value = 2
z_value = 3
block = 2
[../]
[]
[Kernels]
[./diff]
type = VectorDiffusion
variable = u
[../]
[./time]
type = VectorTimeDerivative
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.01
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/kernels/ad_transient_diffusion/ad_transient_vector_diffusion.i)
[Mesh]
[./generator]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
[../]
[./block1]
type = SubdomainBoundingBoxGenerator
input = generator
bottom_left = '0 0 -1'
top_right = '1 1 1'
block_id = 1
[../]
[./block2]
type = SubdomainBoundingBoxGenerator
input = block1
bottom_left = '0.33 0.33 -1'
top_right = '0.67 0.67 1'
block_id = 2
[../]
[]
[Variables]
[./u]
family = LAGRANGE_VEC
[../]
[]
[ICs]
[./u]
type = VectorConstantIC
variable = u
x_value = 1
y_value = 2
z_value = 3
block = 2
[../]
[]
[Kernels]
[./diff]
type = ADVectorDiffusion
variable = u
[../]
[./time]
type = ADVectorTimeDerivative
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.01
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/mixed-transient-steady/mixed.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature]
[InitialCondition]
type = ConstantIC
value = 1.0
[]
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
expression = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/coupled-force/gravity-through-coupled-force.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[u]
family = LAGRANGE_VEC
[]
[]
[AuxVariables]
[gravity]
family = LAGRANGE_VEC
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[gravity]
type = VectorConstantIC
x_value = '0'
y_value = '-9.81'
variable = gravity
[]
[]
[Kernels]
inactive = 'momentum_coupled_forces_two_vars momentum_coupled_forces_two_funcs'
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[momentum_coupled_forces_var_and_func]
type = INSADMomentumCoupledForce
variable = velocity
coupled_vector_var = u
vector_function = 'vector_gravity_func'
[]
[momentum_coupled_forces_two_vars]
type = INSADMomentumCoupledForce
variable = velocity
coupled_vector_var = 'u gravity'
[]
[momentum_coupled_forces_two_funcs]
type = INSADMomentumCoupledForce
variable = velocity
vector_function = 'vector_func vector_gravity_func'
[]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[u_diff]
type = VectorDiffusion
variable = u
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left top'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[u_left]
type = VectorFunctionDirichletBC
variable = u
boundary = 'left'
function_x = 1
function_y = 1
[]
[u_right]
type = VectorFunctionDirichletBC
variable = u
boundary = 'right'
function_x = -1
function_y = -1
[]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
[out]
type = Exodus
hide = 'gravity'
[]
[]
[Functions]
[vector_func]
type = ParsedVectorFunction
expression_x = '-2*x + 1'
expression_y = '-2*x + 1'
[]
[vector_gravity_func]
type = ParsedVectorFunction
expression_x = '0'
expression_y = '-9.81'
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/coupled-force/steady-function.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[u]
family = LAGRANGE_VEC
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[momentum_coupled_force]
type = INSADMomentumCoupledForce
variable = velocity
vector_function = 'vector_func'
[]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[u_diff]
type = VectorDiffusion
variable = u
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left top'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[u_left]
type = VectorFunctionDirichletBC
variable = u
boundary = 'left'
function_x = 1
function_y = 1
[]
[u_right]
type = VectorFunctionDirichletBC
variable = u
boundary = 'right'
function_x = -1
function_y = -1
[]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
[Functions]
[vector_func]
type = ParsedVectorFunction
expression_x = '-2*x + 1'
expression_y = '-2*x + 1'
[]
[]
(modules/fsi/test/tests/2d-finite-strain-steady/thermal-me.i)
# Units: specific_heat_capacity--cp--J/(kg.K); density--rho--kg/(cm^3);
# dynamic_viscosity--mu--kg/(cm.s); thermal_conductivity--k--W/(cm.K);
# pressure--kg/(cm.s^2); force--kg.cm/s^2
outlet_pressure = 0
inlet_velocity = 150 # cm/s
ini_temp = 593 # K
heat_transfer_coefficient = 9 # W/(cm2.K)
g = -981 # cm/s2
alpha_fluid = 2e-4 # thermal expansion coefficient of fluid used in INSADBoussinesqBodyForce
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = '2layers_2d_midline.msh'
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
order = FIRST
block = 'fluid'
[]
[p]
family = LAGRANGE
order = FIRST
block = 'fluid'
[]
[Tf]
family = LAGRANGE
order = FIRST
block = 'fluid'
[]
[Ts]
family = LAGRANGE
order = FIRST
block = 'solid'
[]
[disp_x]
family = LAGRANGE
order = FIRST
block = 'solid fluid'
[]
[disp_y]
family = LAGRANGE
order = FIRST
block = 'solid fluid'
[]
[]
[AuxVariables]
[heat_source]
family = MONOMIAL
order = FIRST
block = 'solid'
[]
[]
[ICs]
[initial_velocity]
type = VectorConstantIC
variable = velocity
x_value = 0
y_value = ${inlet_velocity}
z_value = 0
[]
[initial_p]
type = FunctionIC
variable = p
function = ini_p
[]
[initial_Tf]
type = ConstantIC
variable = Tf
value = ${ini_temp}
[]
[initial_Ts]
type = ConstantIC
variable = Ts
value = ${ini_temp}
[]
[]
[Kernels]
[fluid_mass]
type = INSADMass
variable = p
use_displaced_mesh = true
[]
[fluid_mass_pspg]
type = INSADMassPSPG
variable = p
use_displaced_mesh = true
[]
[fluid_momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
use_displaced_mesh = true
[]
[fluid_momentum_convection]
type = INSADMomentumAdvection
variable = velocity
use_displaced_mesh = true
[]
[fluid_momentum_viscous]
type = INSADMomentumViscous
variable = velocity
use_displaced_mesh = true
[]
[fluid_momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
use_displaced_mesh = true
[]
[fluid_momentum_gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 ${g} 0'
use_displaced_mesh = true
[]
[fluid_momentum_buoyancy]
type = INSADBoussinesqBodyForce
variable = velocity
gravity = '0 ${g} 0'
alpha_name = 'alpha_fluid'
ref_temp = 'T_ref'
temperature = Tf
use_displaced_mesh = true
[]
[fluid_momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
use_displaced_mesh = true
[]
[fluid_temperature_time]
type = INSADHeatConductionTimeDerivative
variable = Tf
use_displaced_mesh = true
[]
[fluid_temperature_conduction]
type = ADHeatConduction
variable = Tf
thermal_conductivity = 'k'
use_displaced_mesh = true
[]
[fluid_temperature_advection]
type = INSADEnergyAdvection
variable = Tf
use_displaced_mesh = true
[]
[fluid_temperature_supg]
type = INSADEnergySUPG
variable = Tf
velocity = velocity
use_displaced_mesh = true
[]
[solid_temperature_time]
type = ADHeatConductionTimeDerivative
variable = Ts
density_name = 'rho'
specific_heat = 'cp'
block = 'solid'
use_displaced_mesh = true
[]
[solid_temperature_conduction]
type = ADHeatConduction
variable = Ts
thermal_conductivity = 'k'
block = 'solid'
use_displaced_mesh = true
[]
[heat_source]
type = ADCoupledForce
variable = Ts
v = heat_source
block = 'solid'
use_displaced_mesh = true
[]
[disp_x_smooth]
type = Diffusion
variable = disp_x
block = fluid
[]
[disp_y_smooth]
type = Diffusion
variable = disp_y
block = fluid
[]
[]
[Physics/SolidMechanics/QuasiStatic]
strain = FINITE
material_output_order = FIRST
generate_output = 'vonmises_stress stress_xx stress_yy stress_zz strain_xx strain_yy strain_zz'
[solid]
block = 'solid'
temperature = Ts
automatic_eigenstrain_names = true
[]
[]
[InterfaceKernels]
[convection_heat_transfer]
type = ConjugateHeatTransfer
variable = Tf
T_fluid = Tf
neighbor_var = 'Ts'
boundary = 'solid_wall'
htc = 'htc'
use_displaced_mesh = true
[]
[]
[AuxKernels]
[heat_source_distribution_auxk]
type = FunctionAux
variable = heat_source
function = heat_source_distribution_function
block = 'solid'
use_displaced_mesh = true
execute_on = 'INITIAL TIMESTEP_BEGIN'
[]
[]
[BCs]
[no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'solid_wall'
use_displaced_mesh = true
[]
[inlet_velocity]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'fluid_bottom'
function_y = ${inlet_velocity}
use_displaced_mesh = true
[]
[symmetry]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'fluid_wall'
function_x = 0
set_x_comp = true
set_y_comp = false
set_z_comp = false
use_displaced_mesh = true
[]
[outlet_p]
type = DirichletBC
variable = p
boundary = 'fluid_top'
value = ${outlet_pressure}
use_displaced_mesh = true
[]
[inlet_T]
type = DirichletBC
variable = Tf
boundary = 'fluid_bottom'
value = ${ini_temp}
use_displaced_mesh = true
[]
[pin1_y]
type = DirichletBC
variable = disp_y
boundary = 'pin1'
value = 0
use_displaced_mesh = true
[]
[pin1_x]
type = DirichletBC
variable = disp_x
boundary = 'pin1'
value = 0
use_displaced_mesh = true
[]
[top_and_bottom_y]
type = DirichletBC
variable = disp_y
boundary = 'solid_bottom solid_top fluid_top fluid_bottom'
value = 0
use_displaced_mesh = true
[]
[left_and_right_x]
type = DirichletBC
variable = disp_x
boundary = 'fluid_wall fluid_bottom'
value = 0
use_displaced_mesh = true
[]
[]
[Materials]
[rho_solid]
type = ADParsedMaterial
property_name = rho
expression = '0.0110876 * pow(9.9672e-1 + 1.179e-5 * Ts - 2.429e-9 * pow(Ts,2) + 1.219e-12 * pow(Ts,3),-3)'
coupled_variables = 'Ts'
block = 'solid'
use_displaced_mesh = true
[]
[cp_solid]
type = ADParsedMaterial
property_name = cp
expression = '0.76 * ((302.27 * pow((548.68 / Ts),2) * exp(548.68 / Ts)) / pow((exp(548.68 / Ts) - 1),2) + 2 * 8.463e-3 * Ts + 8.741e7 * 18531.7 * exp(-18531.7 / Ts) / pow(Ts,2)) + 0.24 * ((322.49 * pow((587.41/Ts),2) * exp(587.41 / Ts)) / pow((exp(587.41 / Ts) - 1),2) + 2 * 1.4679e-2 * Ts)'
coupled_variables = 'Ts'
block = 'solid'
use_displaced_mesh = true
[]
[k_solid]
type = ADParsedMaterial
property_name = k
expression = '1.158/(7.5408 + 17.692 * (Ts / 1000) + 3.6142 * pow((Ts/1000),2)) + 74.105 * pow((Ts / 1000),-2.5) * exp(-16.35 / (Ts / 1000))'
coupled_variables = 'Ts'
block = 'solid'
use_displaced_mesh = true
[]
[rho_fluid]
type = ADParsedMaterial
property_name = rho
expression = '(11096 - 1.3236 * Tf) * 1e-6'
coupled_variables = 'Tf'
block = 'fluid'
use_displaced_mesh = true
[]
[cp_fluid]
type = ADParsedMaterial
property_name = cp
expression = '159 - 2.72e-2 * Tf + 7.12e-6 * pow(Tf,2)'
coupled_variables = 'Tf'
block = 'fluid'
use_displaced_mesh = true
[]
[k_fluid]
type = ADParsedMaterial
property_name = k
expression = '(3.61 + 1.517e-2 * Tf - 1.741e-6 * pow(Tf,2)) * 1e-2'
coupled_variables = 'Tf'
block = 'fluid'
use_displaced_mesh = true
[]
[mu_fluid]
type = ADParsedMaterial
property_name = mu
expression = '4.94e-6 * exp(754.1/Tf)'
coupled_variables = 'Tf'
block = 'fluid'
use_displaced_mesh = true
[]
[buoyancy_thermal_expansion_coefficient_fluid]
type = ADGenericConstantMaterial
prop_names = 'alpha_fluid'
prop_values = '${alpha_fluid}'
block = 'fluid'
use_displaced_mesh = true
[]
[buoyancy_reference_temperature_fluid]
type = GenericConstantMaterial
prop_names = 'T_ref'
prop_values = '${ini_temp}'
block = 'fluid'
use_displaced_mesh = true
[]
[ins_mat_fluid]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = Tf
block = 'fluid'
use_displaced_mesh = true
[]
[htc]
type = ADGenericFunctionMaterial
prop_names = htc
prop_values = htc_function
use_displaced_mesh = true
[]
[elasticity_solid]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 2e7
poissons_ratio = 0.32
block = 'solid'
use_displaced_mesh = true
[]
[thermal_expansion_solid]
type = ComputeThermalExpansionEigenstrain
temperature = Ts
thermal_expansion_coeff = 2e-4
stress_free_temperature = 593
eigenstrain_name = thermal_expansion
block = 'solid'
use_displaced_mesh = true
[]
[stress_solid]
type = ComputeFiniteStrainElasticStress
block = 'solid'
[]
[]
[Functions]
[htc_function]
type = ParsedFunction
expression = ${heat_transfer_coefficient}
[]
[ini_p]
type = ParsedFunction
expression = '0.010302 * 981 * (10 - y)'
[]
[heat_source_distribution_function]
type = ParsedFunction
expression = '300 * sin(pi * y / 10)'
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
solve_type = 'PJFNK'
[]
[]
[Executioner]
type = Transient
end_time = 1e4
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_max_its = 30
l_max_its = 100
automatic_scaling = true
compute_scaling_once = true
off_diagonals_in_auto_scaling = true
dtmin = 1
nl_abs_tol = 1e-12
[TimeStepper]
type = IterationAdaptiveDT
optimal_iterations = 6
growth_factor = 1.5
dt = 1
[]
[]
[Outputs]
[csv]
type = CSV
file_base = 'thermal-me'
execute_on = 'final'
[]
[]
[Postprocessors]
[average_solid_Ts]
type = ElementAverageValue
variable = Ts
block = 'solid'
use_displaced_mesh = true
[]
[average_fluid_Tf]
type = ElementAverageValue
variable = Tf
block = 'fluid'
use_displaced_mesh = true
[]
[max_solid_Ts]
type = ElementExtremeValue
variable = Ts
value_type = max
block = 'solid'
use_displaced_mesh = true
[]
[max_fluid_Tf]
type = ElementExtremeValue
variable = Tf
value_type = max
block = 'fluid'
use_displaced_mesh = true
[]
[min_solid_Ts]
type = ElementExtremeValue
variable = Ts
value_type = min
block = 'solid'
use_displaced_mesh = true
[]
[min_fluid_Tf]
type = ElementExtremeValue
variable = Tf
value_type = min
block = 'fluid'
use_displaced_mesh = true
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_by_parts_steady_stabilized_second_order.i)
[GlobalParams]
order = SECOND
integrate_p_by_parts = true
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[AuxVariables]
[vel_x]
[]
[vel_y]
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
order = FIRST
[../]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[../]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 'inlet_func'
[../]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
expression = '-4 * x^2 + 1'
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
console = true
[./out]
type = Exodus
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
execute_on = 'timestep_end'
[../]
[]
(modules/navier_stokes/test/tests/finite_element/ins/boussinesq/benchmark/benchmark.i)
rayleigh=1e3
hot_temp=${rayleigh}
temp_ref=${fparse hot_temp / 2.}
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 100
ny = 100
[]
[./bottom_left]
type = ExtraNodesetGenerator
new_boundary = corner
coord = '0 0'
input = gen
[../]
[]
[Preconditioning]
[./Newton_SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-12
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'bjacobi lu NONZERO 200'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[out]
type = Exodus
[]
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
[]
[p][]
[temp]
initial_condition = 340
scaling = 1e-4
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[BCs]
[./velocity_dirichlet]
type = VectorDirichletBC
boundary = 'left right bottom top'
variable = velocity
# The third entry is to satisfy RealVectorValue
values = '0 0 0'
[../]
# Even though we are integrating by parts, because there are no integrated
# boundary conditions on the velocity p doesn't appear in the system of
# equations. Thus we must pin the pressure somewhere in order to ensure a
# unique solution
[./p_zero]
type = DirichletBC
boundary = corner
variable = p
value = 0
[../]
[./hot]
type = DirichletBC
variable = temp
boundary = left
value = ${hot_temp}
[../]
[./cold]
type = DirichletBC
variable = temp
boundary = right
value = 0
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[]
[./buoyancy]
type = INSADBoussinesqBodyForce
variable = velocity
temperature = temp
gravity = '0 -1 0'
[../]
[./gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 -1 0'
[../]
[supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[temp_advection]
type = INSADEnergyAdvection
variable = temp
[]
[temp_conduction]
type = ADHeatConduction
variable = temp
thermal_conductivity = 'k'
[../]
[temp_supg]
type = INSADEnergySUPG
variable = temp
velocity = velocity
[]
[]
[Materials]
[./ad_const]
type = ADGenericConstantMaterial
# alpha = coefficient of thermal expansion where rho = rho0 -alpha * rho0 * delta T
prop_names = 'mu rho alpha k cp'
prop_values = '1 1 1 1 1'
[../]
[./const]
type = GenericConstantMaterial
prop_names = 'temp_ref'
prop_values = '${temp_ref}'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temp
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/coupled-force/gravity-object.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[u]
family = LAGRANGE_VEC
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[momentum_coupled_force]
type = INSADMomentumCoupledForce
variable = velocity
coupled_vector_var = u
[]
[gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 -9.81 0'
[]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[u_diff]
type = VectorDiffusion
variable = u
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left top'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[u_left]
type = VectorFunctionDirichletBC
variable = u
boundary = 'left'
function_x = 1
function_y = 1
[]
[u_right]
type = VectorFunctionDirichletBC
variable = u
boundary = 'right'
function_x = -1
function_y = -1
[]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/RZ_cone/ad_rz_cone_by_parts_steady_stabilized.i)
[GlobalParams]
order = FIRST
integrate_p_by_parts = true
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[AuxVariables]
[vel_x]
[]
[vel_y]
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[]
# Need to set a non-zero initial condition because we have a velocity norm in
# the denominator for the tau coefficient of the stabilization term
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
[../]
[momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[]
[BCs]
[inlet]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom'
function_x = 0
function_y = 'inlet_func'
[../]
[wall]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'right'
function_x = 0
function_y = 0
[]
[axis]
type = ADVectorFunctionDirichletBC
variable = velocity
boundary = 'left'
set_y_comp = false
function_x = 0
[]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
expression = '-4 * x^2 + 1'
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[ins_mat]
type = INSADTauMaterial
velocity = velocity
pressure = p
[]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
console = true
[./out]
type = Exodus
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
execute_on = 'timestep_end'
[../]
[]