- componentThe component of the Lagrange multiplier to compute.
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:The component of the Lagrange multiplier to compute.
- lm_var_xLagrange multiplier variable along the x direction.
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Lagrange multiplier variable along the x direction.
- lm_var_yLagrange multiplier variable along the y direction.
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Lagrange multiplier variable along the y direction.
- primary_boundaryThe name of the primary boundary sideset.
C++ Type:BoundaryName
Unit:(no unit assumed)
Controllable:No
Description:The name of the primary boundary sideset.
- secondary_boundaryThe name of the secondary boundary sideset.
C++ Type:BoundaryName
Unit:(no unit assumed)
Controllable:No
Description:The name of the secondary boundary sideset.
- variableThe name of the variable that this object applies to
C++ Type:AuxVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the variable that this object applies to
MortarPressureComponentAux
Overview
This object transforms the Lagrange multiplier (LM) variable from the Cartesian coordinate system to the local coordinate system and outputs each individual component along the normal or the tangential direction.
The definition of LM variable on node in the Cartesian coordinate system is where , , are the LM variable components along the , , directions, respectively. Here, vanishes for two-dimensional problems. The , are the normal vectors along the three directions.
In the local coordinate system, the definition of LM variable is where is the component that is normal to the contact surface, is the local normal vector. For frictional problems in two dimensions, the is the tangential component that is aligned with the contact surface, is the corresponding tangential vector. In three-dimensional frictional problems, an additional component, exist along the contact surface, which is associated with the second tangential vector .
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
- check_boundary_restrictedTrueWhether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether to check for multiple element sides on the boundary in the case of a boundary restricted, element aux variable. Setting this to false will allow contribution to a single element's elemental value(s) from multiple boundary sides on the same element (example: when the restricted boundary exists on two or more sides of an element, such as at a corner of a mesh
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Options:XFEM_MARK, FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, NONLINEAR_CONVERGENCE, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM, PRE_DISPLACE
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- lm_var_zLagrange multiplier variable along the z direction (only exist for 3D problems).
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Lagrange multiplier variable along the z direction (only exist for 3D problems).
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshTrueWhether to use the displaced mesh to get the mortar interface.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether to use the displaced mesh to get the mortar interface.
Advanced Parameters
Input Files
- (modules/contact/test/tests/mortar_cartesian_lms/two_block_1st_order_constraint_lm_xy_friction_vcp.i)
- (modules/contact/test/tests/mortar_cartesian_lms/two_block_1st_order_constraint_lm_xy_friction_pg.i)
- (modules/contact/test/tests/mortar_cartesian_lms/two_block_1st_order_constraint_lm_xy_friction.i)
- (modules/contact/test/tests/mortar_aux_kernels/pressure-aux-friction.i)
- (modules/contact/test/tests/mortar_aux_kernels/pressure-aux-frictionless-3d.i)
- (modules/contact/test/tests/mortar_aux_kernels/pressure-aux-frictionless.i)
- (modules/contact/test/tests/mortar_aux_kernels/pressure-aux-friction-3d.i)
(modules/contact/test/tests/mortar_cartesian_lms/two_block_1st_order_constraint_lm_xy_friction_vcp.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
theta = 0
velocity = 0.1
refine = 3
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.35
xmax = -0.05
ymin = -1
ymax = 0
nx = 1
ny = 3
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_sideset_names]
type = RenameBoundaryGenerator
input = left_block_sidesets
old_boundary = '10 11 12 13'
new_boundary = 'l_bottom l_right l_top l_left'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sideset_names
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.3
ymin = -1
ymax = 0
nx = 1
ny = 2
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_sideset_names]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '20 21 22 23'
new_boundary = 'r_bottom r_right r_top r_left'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sideset_names
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[rotate_mesh]
type = TransformGenerator
input = right_lower
transform = ROTATE
vector_value = '0 0 ${theta}'
[]
uniform_refine = ${refine}
[]
[Variables]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[tangent_lm]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[normal_lm]
type = MortarPressureComponentAux
variable = normal_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'NORMAL'
boundary = '11'
[]
[tangent_lm]
type = MortarPressureComponentAux
variable = tangent_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'tangent1'
boundary = '11'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = ParsedFunction
expression = '${velocity} * t * cos(${theta}/180*pi)'
[]
[vertical_movement]
type = ParsedFunction
expression = '${velocity} * t * sin(${theta}/180*pi)'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e4
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e8
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceCartesianLMMechanicalContact # ComputeCartesianLMFrictionMechanicalContact
# type = ComputeWeightedGapLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
mu = 1.0
c_t = 1.0e5
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[Preconditioning]
[vcp]
type = VCP
full = true
lm_variable = 'lm_x lm_y'
primary_variable = 'disp_x disp_y'
preconditioner = 'LU'
is_lm_coupling_diagonal = false
adaptive_condensation = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = ' 1e-8 NONZERO 1e-15'
line_search = none
dt = 0.1
dtmin = 0.1
end_time = 1.0
l_max_its = 100
nl_max_its = 20
nl_rel_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[max_norma_lm]
type = ElementExtremeValue
variable = normal_lm
[]
[min_norma_lm]
type = ElementExtremeValue
variable = normal_lm
value_type = min
[]
[]
[VectorPostprocessors]
[normal_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = normal_lm
sort_by = 'y'
[]
[tangent_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = tangent_lm
sort_by = 'y'
[]
[]
(modules/contact/test/tests/mortar_cartesian_lms/two_block_1st_order_constraint_lm_xy_friction_pg.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
theta = 0
velocity = 0.1
refine = 3
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.35
xmax = -0.05
ymin = -1
ymax = 0
nx = 1
ny = 3
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_sideset_names]
type = RenameBoundaryGenerator
input = left_block_sidesets
old_boundary = '10 11 12 13'
new_boundary = 'l_bottom l_right l_top l_left'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sideset_names
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.3
ymin = -1
ymax = 0
nx = 1
ny = 2
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_sideset_names]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '20 21 22 23'
new_boundary = 'r_bottom r_right r_top r_left'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sideset_names
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[rotate_mesh]
type = TransformGenerator
input = right_lower
transform = ROTATE
vector_value = '0 0 ${theta}'
[]
uniform_refine = ${refine}
[]
[Variables]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[tangent_lm]
family = LAGRANGE
order = FIRST
[]
[aux_lm]
block = 'secondary_lower'
use_dual = false
[]
[]
[AuxKernels]
[normal_lm]
type = MortarPressureComponentAux
variable = normal_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'NORMAL'
boundary = '11'
[]
[tangent_lm]
type = MortarPressureComponentAux
variable = tangent_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'tangent1'
boundary = '11'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = ParsedFunction
expression = '${velocity} * t * cos(${theta}/180*pi)'
[]
[vertical_movement]
type = ParsedFunction
expression = '${velocity} * t * sin(${theta}/180*pi)'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e4
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e8
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceCartesianLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
mu = 1.0
c_t = 1.0e5
use_petrov_galerkin = true
aux_lm = aux_lm
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15'
line_search = none
dt = 0.1
dtmin = 0.1
end_time = 1.0
l_max_its = 100
nl_max_its = 20
nl_rel_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[max_norma_lm]
type = ElementExtremeValue
variable = normal_lm
[]
[min_norma_lm]
type = ElementExtremeValue
variable = normal_lm
value_type = min
[]
[]
[VectorPostprocessors]
[normal_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = normal_lm
sort_by = 'y'
[]
[tangent_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = tangent_lm
sort_by = 'y'
[]
[]
(modules/contact/test/tests/mortar_cartesian_lms/two_block_1st_order_constraint_lm_xy_friction.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
theta = 0
velocity = 0.1
refine = 3
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.35
xmax = -0.05
ymin = -1
ymax = 0
nx = 1
ny = 3
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_sideset_names]
type = RenameBoundaryGenerator
input = left_block_sidesets
old_boundary = '10 11 12 13'
new_boundary = 'l_bottom l_right l_top l_left'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sideset_names
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.3
ymin = -1
ymax = 0
nx = 1
ny = 2
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_sideset_names]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '20 21 22 23'
new_boundary = 'r_bottom r_right r_top r_left'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sideset_names
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[rotate_mesh]
type = TransformGenerator
input = right_lower
transform = ROTATE
vector_value = '0 0 ${theta}'
[]
uniform_refine = ${refine}
[]
[Variables]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[tangent_lm]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[normal_lm]
type = MortarPressureComponentAux
variable = normal_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'NORMAL'
boundary = '11'
[]
[tangent_lm]
type = MortarPressureComponentAux
variable = tangent_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'tangent1'
boundary = '11'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = ParsedFunction
expression = '${velocity} * t * cos(${theta}/180*pi)'
[]
[vertical_movement]
type = ParsedFunction
expression = '${velocity} * t * sin(${theta}/180*pi)'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e4
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e8
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceCartesianLMMechanicalContact # ComputeCartesianLMFrictionMechanicalContact
# type = ComputeWeightedGapLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
mu = 1.0
c_t = 1.0e5
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15'
line_search = none
dt = 0.1
dtmin = 0.1
end_time = 1.0
l_max_its = 100
nl_max_its = 20
nl_rel_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[tot_lin_it]
type = CumulativeValuePostprocessor
postprocessor = num_lin_it
[]
[tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[max_norma_lm]
type = ElementExtremeValue
variable = normal_lm
[]
[min_norma_lm]
type = ElementExtremeValue
variable = normal_lm
value_type = min
[]
[]
[VectorPostprocessors]
[normal_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = normal_lm
sort_by = 'y'
[]
[tangent_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = tangent_lm
sort_by = 'y'
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/pressure-aux-friction.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.35
xmax = -0.05
ymin = -1
ymax = 0
nx = 1
ny = 3
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_sideset_names]
type = RenameBoundaryGenerator
input = left_block_sidesets
old_boundary = '10 11 12 13'
new_boundary = 'l_bottom l_right l_top l_left'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sideset_names
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.3
ymin = -1
ymax = 0
nx = 1
ny = 2
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_sideset_names]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '20 21 22 23'
new_boundary = 'r_bottom r_right r_top r_left'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sideset_names
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 1
[]
[Variables]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[tangent_lm]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[tangent_lm]
type = MortarPressureComponentAux
variable = tangent_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'TANGENT1'
boundary = '11'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = ParsedFunction
expression = '0.1 * t'
[]
[vertical_movement]
type = ParsedFunction
expression = '0.0'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e4
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e8
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceCartesianLMMechanicalContact # ComputeCartesianLMFrictionMechanicalContact
# type = ComputeWeightedGapLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
mu = 1.0
c_t = 1.0e5
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_view'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist 1e-8 NONZERO 1e-15'
line_search = none
dt = 0.1
dtmin = 0.1
end_time = 1.0
l_max_its = 100
nl_max_its = 20
nl_rel_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
exodus = false
csv = true
execute_on = 'FINAL'
[]
[VectorPostprocessors]
[tangent_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = tangent_lm
sort_by = 'id'
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/pressure-aux-frictionless-3d.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
diffusivity = 1e0
scaling = 1e0
[]
[Problem]
# error_on_jacobian_nonzero_reallocation = true
[]
[Mesh]
second_order = false
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[disp_z]
block = '1 2'
[]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[lm_z]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[normal_lm]
type = MortarPressureComponentAux
variable = normal_lm
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
lm_var_x = lm_x
lm_var_y = lm_y
lm_var_z = lm_z
component = 'NORMAL'
boundary = 'top_bottom'
[]
[]
[ICs]
[disp_z]
block = 1
variable = disp_z
value = '${fparse offset}'
type = ConstantIC
[]
[disp_x]
block = 1
variable = disp_x
value = 0
type = ConstantIC
[]
[disp_y]
block = 1
variable = disp_y
value = 0
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[disp_z]
type = MatDiffusion
variable = disp_z
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapCartesianLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
lm_z = lm_z
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
correct_edge_dropping = true
c = 1e+02
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_z]
type = CartesianMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_z
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist 1e-5 NONZERO 1e-10'
end_time = 1
dt = .5
dtmin = .01
l_max_its = 100
nl_max_its = 30
# nl_rel_tol = 1e-6
nl_abs_tol = 1e-12
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = false
csv = true
execute_on = 'FINAL'
[]
[VectorPostprocessors]
[normal_lm]
type = NodalValueSampler
block = secondary_lower
variable = normal_lm
sort_by = 'id'
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/pressure-aux-frictionless.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.35
xmax = -0.05
ymin = -1
ymax = 0
nx = 1
ny = 3
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_sideset_names]
type = RenameBoundaryGenerator
input = left_block_sidesets
old_boundary = '10 11 12 13'
new_boundary = 'l_bottom l_right l_top l_left'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sideset_names
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.3
ymin = -1
ymax = 0
nx = 1
ny = 2
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_sideset_names]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '20 21 22 23'
new_boundary = 'r_bottom r_right r_top r_left'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sideset_names
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 1
[]
[Variables]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[normal_lm]
type = MortarPressureComponentAux
variable = normal_lm
primary_boundary = '23'
secondary_boundary = '11'
lm_var_x = lm_x
lm_var_y = lm_y
component = 'NORMAL'
boundary = '11'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = ParsedFunction
expression = '0.1 * t'
[]
[vertical_movement]
type = ConstantFunction
value = '0.0'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapCartesianLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
interpolate_normals = false
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist 1e-5 NONZERO 1e-10'
line_search = none
dt = 0.1
dtmin = 0.1
end_time = 1.0
l_max_its = 100
nl_max_its = 20
nl_rel_tol = 1e-6
snesmf_reuse_base = false
[]
[Outputs]
exodus = false
csv = true
execute_on = 'FINAL'
[]
[VectorPostprocessors]
[normal_lm]
type = NodalValueSampler
block = 'secondary_lower'
variable = normal_lm
sort_by = 'id'
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/pressure-aux-friction-3d.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
second_order = false
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[disp_z]
block = '1 2'
[]
[lm_x]
block = 'secondary_lower'
use_dual = true
[]
[lm_y]
block = 'secondary_lower'
use_dual = true
[]
[lm_z]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[normal_lm]
family = LAGRANGE
order = FIRST
[]
[tangent1_lm]
family = LAGRANGE
order = FIRST
[]
[tangent2_lm]
family = LAGRANGE
order = FIRST
[]
[]
[ICs]
[disp_z]
block = 1
variable = disp_z
value = '${fparse offset}'
type = ConstantIC
[]
[disp_x]
block = 1
variable = disp_x
value = 0
type = ConstantIC
[]
[disp_y]
block = 1
variable = disp_y
value = 0
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[disp_z]
type = MatDiffusion
variable = disp_z
[]
[]
[AuxKernels]
[tangent2_lm]
type = MortarPressureComponentAux
variable = tangent2_lm
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
lm_var_x = lm_x
lm_var_y = lm_y
lm_var_z = lm_z
component = 'tangent2'
boundary = 'top_bottom'
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceCartesianLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_x = lm_x
lm_y = lm_y
lm_z = lm_z
variable = lm_x # This can be anything really
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
correct_edge_dropping = true
c = 1e+02
c_t = 1e+2
mu = 0.10
[]
[normal_x]
type = CartesianMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_x
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_y]
type = CartesianMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_y
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[normal_z]
type = CartesianMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = lm_z
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = .5
dtmin = .01
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_view'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = ' lu superlu_dist NONZERO 1e-15'
l_max_its = 100
nl_max_its = 30
# nl_rel_tol = 1e-6
nl_abs_tol = 1e-12
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = false
csv = true
execute_on = 'FINAL'
[]
[VectorPostprocessors]
[tangent2_lm]
type = NodalValueSampler
block = secondary_lower
variable = tangent2_lm
sort_by = 'id'
[]
[]