FVNeumannBC

Neumann boundary condition for finite volume method.

Overview

A FVNeumannBC may be used to specify a diffusive or an advective flux. For example, to specify a flux boundary condition in the following diffusion problem, a FVNeumannBC with a constant value of $var element = document.getElementById("moose-equation-6d4c204f-9a08-456d-a3bc-5ee749f55e19");katex.render("g", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ may be used.

$var element = document.getElementById("moose-equation-87a9c0d3-2253-4911-baf0-43caa887f139");katex.render("\\begin{aligned} -\\nabla^2 u(\\mathbf{M}) &= f(\\mathbf{M}) && \\forall \\mathbf{M} \\in \\Omega & (1)\\\\ \\frac{\\partial u}{\\partial n}(\\mathbf{M}) &= g && \\forall \\mathbf{M} \\in \\partial \\Omega_N & (2) \\\\ u(\\mathbf{M}) &= 1 && \\forall \\mathbf{M} \\in \\partial \\Omega_D & (3) \\end{aligned}", element, {displayMode:true,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$

where $var element = document.getElementById("moose-equation-74f734cc-84be-463d-84cc-c7f09b11f402");katex.render("\\Omega \\subset \\mathbb{R}^n", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ is the domain, $var element = document.getElementById("moose-equation-5f80cfa5-59f0-45ea-9968-e1011c2c7a06");katex.render("\\partial \\Omega = \\partial \\Omega_D \\cup \\partial \\Omega_N", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ is its boundary, and $var element = document.getElementById("moose-equation-f8fd1bf0-3a76-455b-bdc0-45caa64ee66d");katex.render("\\mathbf{M}", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ is a point on the domain or its boundary. In this case, a FVNeumannBC object is used to impose the condition (2) on the subset of the boundary denoted by $var element = document.getElementById("moose-equation-e3671b15-4fd5-4cef-9059-008a64d064db");katex.render("\\partial \\Omega_D", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ . In this case, the value field corresponds to the constant $var element = document.getElementById("moose-equation-bc7870e1-bb66-4627-b8cd-c3af494984ca");katex.render("g", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ , and the user must define one or more sidesets corresponding to the boundary $var element = document.getElementById("moose-equation-28aff937-5bf4-488d-9bde-ab28667e4a0c");katex.render("\\partial \\Omega_D", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ to pass to the boundary argument. For this particular problem, an additional boundary condition, for example a FVDirichletBC as in (3) would also be necessary to remove the nullspace.

Likewise, to specify an advective flux of constant value $var element = document.getElementById("moose-equation-fe6f6d35-e6f6-44b8-b584-78bc01247843");katex.render("g", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ in a 1D advection problem with an advective velocity $var element = document.getElementById("moose-equation-0eb02b59-2fc5-4cf9-bafd-0cbb6cbf540a");katex.render("v", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ :

$var element = document.getElementById("moose-equation-eb41e3ac-719d-41bd-b972-255609752812");katex.render("\\begin{aligned} \\frac{\\partial u}{\\partial t}(\\mathbf{M}) + v \\frac{\\partial u}{\\partial x}(\\mathbf{M}) &= 0 && \\forall \\mathbf{M} \\in \\Omega & (1)\\\\ v u(\\mathbf{M}) &= g v && \\forall \\mathbf{M} \\in \\partial \\Omega & (2) \\end{aligned}", element, {displayMode:true,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$

The advective flux, the value to specify to the boundary condition (2), is $var element = document.getElementById("moose-equation-2ca7cb6d-d1f8-446d-9bc2-f7a079543923");katex.render("g v", element, {displayMode:false,throwOnError:false,macros:{"\\pf":"\\frac{\\partial #1}{\\partial #2}"}});$ .

Modeling a multi-dimensional problem will require a FVNeumannBC per component.

note

When using the Navier Stokes module, FVNeumannBC may not be available for use with velocity and pressure, as additional information is required on either the gradient or direction of these variables to model fully developed flow for example. Specific boundary conditions are provided, see for example INSFVOutletPressureBC.

Input Parameters

boundaryThe list of boundary IDs from the mesh where this boundary condition applies
C++ Type:std::vector<BoundaryName>
Options:
Description:The list of boundary IDs from the mesh where this boundary condition applies
variableThe name of the variable that this boundary condition applies to
C++ Type:NonlinearVariableName
Options:
Description:The name of the variable that this boundary condition applies to

Required Parameters

displacementsThe displacements
C++ Type:std::vector<VariableName>
Options:
Description:The displacements
prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Options:
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
value0The value of the flux crossing the boundary.
Default:0
C++ Type:double
Options:
Description:The value of the flux crossing the boundary.

Optional Parameters

control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Options:
Description:Determines whether this object is calculated using an implicit or explicit form
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Options:
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Options:
Description:The extra tags for the matrices this Kernel should fill
extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Options:
Description:The extra tags for the vectors this Kernel should fill
matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Description:The tag for the matrices this Kernel should fill
vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime, time
Description:The tag for the vectors this Kernel should fill

Tagging Parameters

Input Files

(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
(test/tests/fvbcs/fv_neumannbc/fv_neumannbc.i)
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-boussinesq.i)
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-effective.i)
(test/tests/fvkernels/fv_simple_diffusion/neumann.i)
(test/tests/fvkernels/two-var-flux-and-kernel/input.i)
(modules/navier_stokes/test/tests/postprocessors/conservation_INSFV.i)
(modules/navier_stokes/test/tests/postprocessors/conservation_PINSFV.i)

(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)

mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
advected_interp_method='average'
velocity_interp_method='rc'

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = 10
    ymin = 0
    ymax = 1
    nx = 100
    ny = 20
  []
[]

[GlobalParams]
  two_term_boundary_expansion = true
[]

[Variables]
  inactive = 'temp_solid'
  [u]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = ${u_inlet}
  []
  [v]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = 1e-6
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [temperature]
    type = INSFVEnergyVariable
  []
  [temp_solid]
    family = 'MONOMIAL'
    order = 'CONSTANT'
    fv = true
  []
[]

[AuxVariables]
  [temp_solid]
    family = 'MONOMIAL'
    order = 'CONSTANT'
    fv = true
    initial_condition = 100
  []
  [porosity]
    family = MONOMIAL
    order = CONSTANT
    fv = true
    initial_condition = 0.5
  []
[]

[FVKernels]
  inactive = 'solid_energy_diffusion solid_energy_convection'
  [mass]
    type = PINSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    vel = 'velocity'
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []

  [u_advection]
    type = PINSFVMomentumAdvection
    variable = u
    advected_quantity = 'rhou'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [u_viscosity]
    type = PINSFVMomentumDiffusion
    variable = u
    mu = ${mu}
    porosity = porosity
  []
  [u_pressure]
    type = PINSFVMomentumPressure
    variable = u
    momentum_component = 'x'
    pressure = pressure
    porosity = porosity
  []

  [v_advection]
    type = PINSFVMomentumAdvection
    variable = v
    advected_quantity = 'rhov'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [v_viscosity]
    type = PINSFVMomentumDiffusion
    variable = v
    mu = ${mu}
    porosity = porosity
  []
  [v_pressure]
    type = PINSFVMomentumPressure
    variable = v
    momentum_component = 'y'
    pressure = pressure
    porosity = porosity
  []

  [energy_advection]
    type = PINSFVEnergyAdvection
    variable = temperature
    vel = 'velocity'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = ${advected_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [energy_diffusion]
    type = PINSFVEnergyDiffusion
    k = ${k}
    variable = temperature
    porosity = porosity
  []
  [energy_convection]
    type = PINSFVEnergyAmbientConvection
    variable = temperature
    is_solid = false
    temp_fluid = temperature
    temp_solid = temp_solid
    h_solid_fluid = 'h_cv'
  []

  [solid_energy_diffusion]
    type = FVDiffusion
    coeff = ${k}
    variable = temp_solid
  []
  [solid_energy_convection]
    type = PINSFVEnergyAmbientConvection
    variable = temp_solid
    is_solid = true
    temp_fluid = temperature
    temp_solid = temp_solid
    h_solid_fluid = 'h_cv'
  []
[]

[FVBCs]
  inactive = 'heated-side'
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = u
    function = ${u_inlet}
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = v
    function = 0
  []
  [inlet-T]
    type = FVNeumannBC
    variable = temperature
    value = ${fparse u_inlet * rho * cp * T_inlet}
    boundary = 'left'
  []

  [no-slip-u]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = u
    function = 0
  []
  [no-slip-v]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = v
    function = 0
  []
  [heated-side]
    type = FVDirichletBC
    boundary = 'top'
    variable = 'temp_solid'
    value = 150
  []

  [symmetry-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = u
    u = u
    v = v
    mu = ${mu}
    momentum_component = 'x'
    porosity = porosity
  []
  [symmetry-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = v
    u = u
    v = v
    mu = ${mu}
    momentum_component = 'y'
    porosity = porosity
  []
  [symmetry-p]
    type = INSFVSymmetryPressureBC
    boundary = 'bottom'
    variable = pressure
  []

  [outlet-p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = 0.1
  []
[]

[Materials]
  [constants]
    type = ADGenericConstantMaterial
    prop_names = 'cp h_cv'
    prop_values = '${cp} 1'
  []
  [ins_fv]
    type = INSFVMaterial
    u = 'u'
    v = 'v'
    pressure = 'pressure'
    rho = ${rho}
    temperature = 'temperature'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
  petsc_options_value = 'asm      100                lu           NONZERO'
  line_search = 'none'
  nl_rel_tol = 1e-12
[]

# Some basic Postprocessors to examine the solution
[Postprocessors]
  [inlet-p]
    type = SideAverageValue
    variable = pressure
    boundary = 'left'
  []
  [outlet-u]
    type = SideAverageValue
    variable = u
    boundary = 'right'
  []
  [outlet-temp]
    type = SideAverageValue
    variable = temperature
    boundary = 'right'
  []
  [solid-temp]
    type = ElementAverageValue
    variable = temp_solid
  []
[]

[Outputs]
  exodus = true
  csv = false
[]

(test/tests/fvbcs/fv_neumannbc/fv_neumannbc.i)

[Mesh]
  [mesh]
    type = CartesianMeshGenerator
    dim = 2
    dx = '1 1'
    dy = '1'
    ix = '5 5'
    iy = '5'
    subdomain_id = '1 1'
  []
  [internal_sideset]
    type = ParsedGenerateSideset
    combinatorial_geometry = 'x<1.01 & x>0.99'
    included_subdomain_ids = 1
    new_sideset_name = 'center'
    input = 'mesh'
  []
[]

[Variables]
  [u]
    family = MONOMIAL
    order = CONSTANT
    fv = true
    block = 1
  []
[]

[FVKernels]
  [diff]
    type = FVDiffusion
    variable = u
    coeff = 1
  []
[]

[FVBCs]
  inactive = 'center'
  [left]
    type = FVDirichletBC
    variable = u
    boundary = left
    value = 1
  []
  [right]
    type = FVNeumannBC
    variable = u
    boundary = right
    value = 4
  []
  # Internal center sideset, should cause erroring out
  [center]
    type = FVNeumannBC
    variable = u
    boundary = center
    value = 0
  []
[]

[Executioner]
  type = Steady
  solve_type = 'Newton'
  petsc_options_iname = '-pc_type'
  petsc_options_value = 'lu'
[]

[Outputs]
  exodus = true
[]

(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-boussinesq.i)

mu=1
rho=1
k=1e-3
cp=1
v_inlet=1
T_inlet=200
advected_interp_method='average'
velocity_interp_method='rc'

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = 2
    ymin = 0
    ymax = 10
    nx = 20
    ny = 100
  []
[]

[GlobalParams]
  two_term_boundary_expansion = true
[]

[Variables]
  [u]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = 1e-6
  []
  [v]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = ${v_inlet}
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [temperature]
    type = INSFVEnergyVariable
  []
[]

[AuxVariables]
  [temp_solid]
    family = 'MONOMIAL'
    order = 'CONSTANT'
    fv = true
    initial_condition = 100
  []
  [porosity]
    family = MONOMIAL
    order = CONSTANT
    fv = true
    initial_condition = 0.4
  []
[]

[FVKernels]
  [mass]
    type = PINSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    vel = 'velocity'
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []

  [u_advection]
    type = PINSFVMomentumAdvection
    variable = u
    advected_quantity = 'rhou'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [u_viscosity]
    type = PINSFVMomentumDiffusion
    variable = u
    mu = ${mu}
    porosity = porosity
  []
  [u_pressure]
    type = PINSFVMomentumPressure
    variable = u
    momentum_component = 'x'
    pressure = pressure
    porosity = porosity
  []
  [u_gravity]
    type = PINSFVMomentumGravity
    variable = u
    rho = ${rho}
    gravity = '0 -9.81 0'
    momentum_component = 'x'
    porosity = porosity
  []
  [u_boussinesq]
    type = PINSFVMomentumBoussinesq
    variable = u
    temperature = 'temperature'
    rho = ${rho}
    ref_temperature = 150
    gravity = '0 -9.81 0'
    momentum_component = 'x'
    porosity = porosity
  []

  [v_advection]
    type = PINSFVMomentumAdvection
    variable = v
    advected_quantity = 'rhov'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [v_viscosity]
    type = PINSFVMomentumDiffusion
    variable = v
    mu = ${mu}
    porosity = porosity
  []
  [v_pressure]
    type = PINSFVMomentumPressure
    variable = v
    momentum_component = 'y'
    pressure = pressure
    porosity = porosity
  []
  [v_gravity]
    type = PINSFVMomentumGravity
    variable = v
    rho = ${rho}
    gravity = '-0 -9.81 0'
    momentum_component = 'y'
    porosity = porosity
  []
  [v_boussinesq]
    type = PINSFVMomentumBoussinesq
    variable = v
    temperature = 'temperature'
    rho = ${rho}
    ref_temperature = 150
    gravity = '0 -9.81 0'
    momentum_component = 'y'
    porosity = porosity
  []

  [energy_advection]
    type = PINSFVEnergyAdvection
    variable = temperature
    vel = 'velocity'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = ${advected_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [energy_diffusion]
    type = PINSFVEnergyDiffusion
    k = ${k}
    variable = temperature
    porosity = porosity
  []
  [energy_convection]
    type = PINSFVEnergyAmbientConvection
    variable = temperature
    is_solid = false
    temp_fluid = temperature
    temp_solid = temp_solid
    h_solid_fluid = 'h_cv'
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'bottom'
    variable = u
    function = 0
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'bottom'
    variable = v
    function = ${v_inlet}
  []
  [inlet-T]
    type = FVNeumannBC
    variable = temperature
    value = ${fparse v_inlet * rho * cp * T_inlet}
    boundary = 'bottom'
  []

  [no-slip-u]
    type = INSFVNoSlipWallBC
    boundary = 'right'
    variable = u
    function = 0
  []
  [no-slip-v]
    type = INSFVNoSlipWallBC
    boundary = 'right'
    variable = v
    function = 0
  []

  [symmetry-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'left'
    variable = u
    u = u
    v = v
    mu = ${mu}
    momentum_component = 'x'
    porosity = porosity
  []
  [symmetry-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'left'
    variable = v
    u = u
    v = v
    mu = ${mu}
    momentum_component = 'y'
    porosity = porosity
  []
  [symmetry-p]
    type = INSFVSymmetryPressureBC
    boundary = 'left'
    variable = pressure
  []

  [outlet-p]
    type = INSFVOutletPressureBC
    boundary = 'top'
    variable = pressure
    function = 0
  []
[]

[Materials]
  [constants]
    type = ADGenericConstantMaterial
    prop_names = 'cp h_cv alpha'
    prop_values = '${cp} 1e-3 8e-4'
  []

  [ins_fv]
    type = INSFVMaterial
    u = 'u'
    v = 'v'
    pressure = 'pressure'
    rho = ${rho}
    temperature = 'temperature'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
  petsc_options_value = 'asm      100                lu           NONZERO'
  line_search = 'none'
  nl_rel_tol = 1e-12
[]

# Some basic Postprocessors to examine the solution
[Postprocessors]
  [inlet-p]
    type = SideAverageValue
    variable = pressure
    boundary = 'top'
  []
  [outlet-v]
    type = SideAverageValue
    variable = v
    boundary = 'top'
  []
  [outlet-temp]
    type = SideAverageValue
    variable = temperature
    boundary = 'top'
  []
[]

[Outputs]
  exodus = true
  csv = false
[]

(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-effective.i)

mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
advected_interp_method='average'
velocity_interp_method='rc'

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = 10
    ymin = 0
    ymax = 1
    nx = 100
    ny = 20
  []
[]

[GlobalParams]
  two_term_boundary_expansion = true
[]

[Variables]
  inactive = 'temp_solid'
  [u]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = ${u_inlet}
  []
  [v]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = 1e-6
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [temperature]
    type = INSFVEnergyVariable
  []
  [temp_solid]
    family = 'MONOMIAL'
    order = 'CONSTANT'
    fv = true
  []
[]

[AuxVariables]
  [temp_solid]
    family = 'MONOMIAL'
    order = 'CONSTANT'
    fv = true
    initial_condition = 100
  []
  [porosity]
    family = MONOMIAL
    order = CONSTANT
    fv = true
    initial_condition = 0.5
  []
[]

[FVKernels]
  inactive = 'solid_energy_diffusion solid_energy_convection'
  [mass]
    type = PINSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    vel = 'velocity'
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []

  [u_advection]
    type = PINSFVMomentumAdvection
    variable = u
    advected_quantity = 'rhou'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [u_viscosity]
    type = PINSFVMomentumDiffusion
    variable = u
    mu = ${mu}
    porosity = porosity
  []
  [u_pressure]
    type = PINSFVMomentumPressure
    variable = u
    momentum_component = 'x'
    pressure = pressure
    porosity = porosity
  []

  [v_advection]
    type = PINSFVMomentumAdvection
    variable = v
    advected_quantity = 'rhov'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [v_viscosity]
    type = PINSFVMomentumDiffusion
    variable = v
    mu = ${mu}
    porosity = porosity
  []
  [v_pressure]
    type = PINSFVMomentumPressure
    variable = v
    momentum_component = 'y'
    pressure = pressure
    porosity = porosity
  []

  [energy_advection]
    type = PINSFVEnergyAdvection
    variable = temperature
    vel = 'velocity'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = ${advected_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [energy_diffusion]
    type = PINSFVEnergyEffectiveDiffusion
    kappa = 'kappa'
    variable = temperature
  []
  [energy_convection]
    type = PINSFVEnergyAmbientConvection
    variable = temperature
    is_solid = false
    temp_fluid = temperature
    temp_solid = temp_solid
    h_solid_fluid = 'h_cv'
  []

  [solid_energy_diffusion]
    type = FVDiffusion
    coeff = ${k}
    variable = temp_solid
  []
  [solid_energy_convection]
    type = PINSFVEnergyAmbientConvection
    variable = temp_solid
    is_solid = true
    temp_fluid = temperature
    temp_solid = temp_solid
    h_solid_fluid = 'h_cv'
  []
[]

[FVBCs]
  inactive = 'heated-side'
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = u
    function = ${u_inlet}
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = v
    function = 0
  []
  [inlet-T]
    type = FVNeumannBC
    variable = temperature
    value = ${fparse u_inlet * rho * cp * T_inlet}
    boundary = 'left'
  []

  [no-slip-u]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = u
    function = 0
  []
  [no-slip-v]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = v
    function = 0
  []
  [heated-side]
    type = FVDirichletBC
    boundary = 'top'
    variable = 'temp_solid'
    value = 150
  []

  [symmetry-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = u
    u = u
    v = v
    mu = ${mu}
    momentum_component = 'x'
    porosity = porosity
  []
  [symmetry-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = v
    u = u
    v = v
    mu = ${mu}
    momentum_component = 'y'
    porosity = porosity
  []
  [symmetry-p]
    type = INSFVSymmetryPressureBC
    boundary = 'bottom'
    variable = pressure
  []

  [outlet-p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = 0.1
  []
[]

[Materials]
  [constants]
    type = ADGenericConstantMaterial
    prop_names = 'cp h_cv'
    prop_values = '${cp} 1'
  []
  [kappa]
    type = ADGenericConstantVectorMaterial
    prop_names = 'kappa'
    prop_values = '1e-3 1e-2 1e-1'
  []
  [ins_fv]
    type = INSFVMaterial
    u = 'u'
    v = 'v'
    pressure = 'pressure'
    rho = ${rho}
    temperature = 'temperature'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
  petsc_options_value = 'asm      100                lu           NONZERO'
  line_search = 'none'
  nl_rel_tol = 1e-12
[]

# Some basic Postprocessors to examine the solution
[Postprocessors]
  [inlet-p]
    type = SideAverageValue
    variable = pressure
    boundary = 'left'
  []
  [outlet-u]
    type = SideAverageValue
    variable = u
    boundary = 'right'
  []
  [outlet-temp]
    type = SideAverageValue
    variable = temperature
    boundary = 'right'
  []
  [solid-temp]
    type = ElementAverageValue
    variable = temp_solid
  []
[]

[Outputs]
  exodus = true
  csv = false
[]

(test/tests/fvkernels/fv_simple_diffusion/neumann.i)

[Mesh]
  type = GeneratedMesh
  dim = 2
  nx = 10
  ny = 10
[]

[Variables]
  [u]
  []
  [v]
    family = MONOMIAL
    order = CONSTANT
    fv = true
  []
[]

[Kernels]
  [diff]
    type = Diffusion
    variable = u
  []
[]

[FVKernels]
  [diff]
    type = FVDiffusion
    variable = v
    coeff = coeff
  []
[]

[FVBCs]
  [left]
    type = FVNeumannBC
    variable = v
    boundary = left
    value = 5
  []
  [right]
    type = FVDirichletBC
    variable = v
    boundary = right
    value = 42
  []
[]

[Materials]
  [diff]
    type = ADGenericConstantMaterial
    prop_names = 'coeff'
    prop_values = '1'
  []
[]

[BCs]
  [left]
    type = NeumannBC
    variable = u
    boundary = left
    value = 5
  []
  [right]
    type = DirichletBC
    variable = u
    boundary = right
    value = 42
  []
[]

[Problem]
  kernel_coverage_check = off
[]

[Executioner]
  type = Steady
  solve_type = 'PJFNK'
  petsc_options_iname = '-pc_type -pc_hypre_type'
  petsc_options_value = 'hypre boomeramg'
[]

[Outputs]
  exodus = true
[]

(test/tests/fvkernels/two-var-flux-and-kernel/input.i)

[Mesh]
  type = GeneratedMesh
  dim = 1
  nx = 20
[]

[Variables]
  [u]
    family = MONOMIAL
    order = CONSTANT
    fv = true
  []
  [v]
    family = MONOMIAL
    order = CONSTANT
    fv = true
  []
[]

[FVKernels]
  [diff_u]
    type = FVDiffusion
    variable = u
    coeff = coeff
  []
  [diff]
    type = FVDiffusion
    variable = v
    coeff = coeff
  []
[]

[FVBCs]
  [left_u]
    type = FVNeumannBC
    variable = u
    boundary = left
    value = 0
  []
  [right_u]
    type = FVDirichletBC
    variable = u
    boundary = right
    value = 42
  []
  [left]
    type = FVDirichletBC
    variable = v
    boundary = left
    value = 7
  []
  [right]
    type = FVDirichletBC
    variable = v
    boundary = right
    value = 42
  []
[]

[Materials]
  [diff]
    type = ADGenericConstantMaterial
    prop_names = 'coeff'
    prop_values = '1'
  []
[]

[Problem]
  kernel_coverage_check = off
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -pc_hypre_type'
  petsc_options_value = 'hypre boomeramg'
[]

[Outputs]
  exodus = true
[]

(modules/navier_stokes/test/tests/postprocessors/conservation_INSFV.i)

mu=1.1
rho=1
advected_interp_method='average'
velocity_interp_method='average'

[GlobalParams]
  two_term_boundary_expansion = true
[]

[Mesh]
  inactive = 'mesh internal_boundary_bot internal_boundary_top'
  [mesh]
    type = CartesianMeshGenerator
    dim = 2
    dx = '1'
    dy = '1 1 1'
    ix = '5'
    iy = '5 5 5'
    subdomain_id = '1
                    2
                    3'
  []
  [internal_boundary_bot]
    type = SideSetsBetweenSubdomainsGenerator
    input = mesh
    new_boundary = 'internal_bot'
    primary_block = 1
    paired_block = 2
  []
  [internal_boundary_top]
    type = SideSetsBetweenSubdomainsGenerator
    input = internal_boundary_bot
    new_boundary = 'internal_top'
    primary_block = 2
    paired_block = 3
  []
  [diverging_mesh]
    type = FileMeshGenerator
    file = 'expansion_quad.e'
  []
[]

[Problem]
  fv_bcs_integrity_check = true
[]

[Variables]
  [u]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [v]
    type = INSFVVelocityVariable
    initial_condition = 1
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [temperature]
    type = INSFVEnergyVariable
  []
[]

[AuxVariables]
  [advected_density]
    order = CONSTANT
    family = MONOMIAL
    fv = true
    initial_condition = ${rho}
  []
[]

[FVKernels]
  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    vel = 'velocity'
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
  []

  [u_advection]
    type = INSFVMomentumAdvection
    variable = u
    advected_quantity = 'rhou'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
  []
  [u_viscosity]
    type = FVDiffusion
    variable = u
    coeff = ${mu}
    force_boundary_execution = true
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = u
    momentum_component = 'x'
    pressure = pressure
  []

  [v_advection]
    type = INSFVMomentumAdvection
    variable = v
    advected_quantity = 'rhov'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
  []
  [v_viscosity]
    type = FVDiffusion
    variable = v
    coeff = ${mu}
    force_boundary_execution = true
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = v
    momentum_component = 'y'
    pressure = pressure
  []

  [temp_advection]
    type = INSFVEnergyAdvection
    vel = 'velocity'
    variable = temperature
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
  []
  [temp_source]
    type = FVBodyForce
    variable = temperature
    function = 10
    block = 1
  []
[]

[FVBCs]
  inactive = 'noslip-u noslip-v'
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'bottom'
    variable = u
    function = 0
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'bottom'
    variable = v
    function = 1
  []
  [noslip-u]
    type = INSFVNoSlipWallBC
    boundary = 'right'
    variable = u
    function = 0
  []
  [noslip-v]
    type = INSFVNoSlipWallBC
    boundary = 'right'
    variable = v
    function = 0
  []
  [free-slip-u]
    type = INSFVNaturalFreeSlipBC
    boundary = 'right'
    variable = u
  []
  [free-slip-v]
    type = INSFVNaturalFreeSlipBC
    boundary = 'right'
    variable = v
  []
  [axis-u]
    type = INSFVSymmetryVelocityBC
    boundary = 'left'
    variable = u
    u = u
    v = v
    mu = ${mu}
    momentum_component = x
  []
  [axis-v]
    type = INSFVSymmetryVelocityBC
    boundary = 'left'
    variable = v
    u = u
    v = v
    mu = ${mu}
    momentum_component = y
  []
  [axis-p]
    type = INSFVSymmetryPressureBC
    boundary = 'left'
    variable = pressure
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'top'
    variable = pressure
    function = 0
  []
  [inlet_temp]
    type = FVNeumannBC
    boundary = 'bottom'
    variable = temperature
    value = 300
  []
[]

[Materials]
  [ins_fv]
    type = INSFVMaterial
    u = 'u'
    v = 'v'
    pressure = 'pressure'
    temperature = 'temperature'
    rho = ${rho}
  []
  [advected_material_property]
    type = ADGenericConstantMaterial
    prop_names = 'advected_rho cp'
    prop_values ='${rho} 1'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
  petsc_options_value = 'asm      200                lu           NONZERO'
  line_search = 'none'
  nl_rel_tol = 1e-12
[]

[Postprocessors]
  [inlet_mass_variable]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = advected_density
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [inlet_mass_constant]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = ${rho}
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [inlet_mass_matprop]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_mat_prop = 'advected_rho'
    fv = true
  []
  [mid1_mass]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_mass]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_mass]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []

  [inlet_momentum_x]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid1_momentum_x]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_momentum_x]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_momentum_x]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []

  [inlet_momentum_y]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid1_momentum_y]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_momentum_y]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_momentum_y]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []

  [inlet_advected_energy]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
  []
  [mid1_advected_energy]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_advected_energy]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_advected_energy]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
  []
[]

[Outputs]
  exodus = false
  csv = true
  inactive = 'console_mass console_momentum_x console_momentum_y console_energy'
  [console_mass]
    type = Console
    start_step = 1
    show = 'inlet_mass_variable inlet_mass_constant inlet_mass_matprop mid1_mass mid2_mass outlet_mass'
  []
  [console_momentum_x]
    type = Console
    start_step = 1
    show = 'inlet_momentum_x mid1_momentum_x mid2_momentum_x outlet_momentum_x'
  []
  [console_momentum_y]
    type = Console
    start_step = 1
    show = 'inlet_momentum_y mid1_momentum_y mid2_momentum_y outlet_momentum_y'
  []
  [console_energy]
    type = Console
    start_step = 1
    show = 'inlet_advected_energy mid1_advected_energy mid2_advected_energy outlet_advected_energy'
  []
[]

(modules/navier_stokes/test/tests/postprocessors/conservation_PINSFV.i)

mu=1.1
rho=1
advected_interp_method='average'
velocity_interp_method='average'

[Mesh]
  inactive = 'mesh internal_boundary_bot internal_boundary_top'
  [mesh]
    type = CartesianMeshGenerator
    dim = 2
    dx = '1'
    dy = '1 1 1'
    ix = '5'
    iy = '5 5 5'
    subdomain_id = '1
                    2
                    3'
  []
  [internal_boundary_bot]
    type = SideSetsBetweenSubdomainsGenerator
    input = mesh
    new_boundary = 'internal_bot'
    primary_block = 1
    paired_block = 2
  []
  [internal_boundary_top]
    type = SideSetsBetweenSubdomainsGenerator
    input = internal_boundary_bot
    new_boundary = 'internal_top'
    primary_block = 2
    paired_block = 3
  []
  [diverging_mesh]
    type = FileMeshGenerator
    file = 'expansion_quad.e'
  []
[]

[Problem]
  kernel_coverage_check = false
  fv_bcs_integrity_check = true
[]

[GlobalParams]
  two_term_boundary_expansion = true
[]

[Variables]
  [u]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = 0
  []
  [v]
    type = PINSFVSuperficialVelocityVariable
    initial_condition = 1
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [temperature]
    type = INSFVEnergyVariable
  []
[]

[AuxVariables]
  [advected_density]
    order = CONSTANT
    family = MONOMIAL
    fv = true
    initial_condition = ${rho}
  []
  [porosity]
    order = CONSTANT
    family = MONOMIAL
    fv = true
    initial_condition = 0.5
  []
[]

[FVKernels]
  [mass]
    type = PINSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    vel = 'velocity'
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []

  [u_advection]
    type = PINSFVMomentumAdvection
    variable = u
    advected_quantity = 'rhou'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [u_viscosity]
    type = PINSFVMomentumDiffusion
    variable = u
    force_boundary_execution = true
    porosity = porosity
    mu = ${mu}
  []
  [u_pressure]
    type = PINSFVMomentumPressure
    variable = u
    momentum_component = 'x'
    pressure = pressure
    porosity = porosity
  []

  [v_advection]
    type = PINSFVMomentumAdvection
    variable = v
    advected_quantity = 'rhov'
    vel = 'velocity'
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [v_viscosity]
    type = PINSFVMomentumDiffusion
    variable = v
    force_boundary_execution = true
    porosity = porosity
    mu = ${mu}
  []
  [v_pressure]
    type = PINSFVMomentumPressure
    variable = v
    momentum_component = 'y'
    pressure = pressure
    porosity = porosity
  []

  [temp_advection]
    type = PINSFVEnergyAdvection
    vel = 'velocity'
    variable = temperature
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    pressure = pressure
    u = u
    v = v
    mu = ${mu}
    rho = ${rho}
    porosity = porosity
  []
  [temp_source]
    type = FVBodyForce
    variable = temperature
    function = 10
    block = 1
  []
[]

[FVBCs]
  inactive = 'noslip-u noslip-v'
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'bottom'
    variable = u
    function = 0
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'bottom'
    variable = v
    function = 1
  []
  [noslip-u]
    type = INSFVNoSlipWallBC
    boundary = 'right'
    variable = u
    function = 0
  []
  [noslip-v]
    type = INSFVNoSlipWallBC
    boundary = 'right'
    variable = v
    function = 0
  []
  [free-slip-u]
    type = INSFVNaturalFreeSlipBC
    boundary = 'right'
    variable = u
  []
  [free-slip-v]
    type = INSFVNaturalFreeSlipBC
    boundary = 'right'
    variable = v
  []
  [axis-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'left'
    variable = u
    u = u
    v = v
    mu = ${mu}
    momentum_component = x
    porosity = porosity
  []
  [axis-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'left'
    variable = v
    u = u
    v = v
    mu = ${mu}
    momentum_component = y
    porosity = porosity
  []
  [axis-p]
    type = INSFVSymmetryPressureBC
    boundary = 'left'
    variable = pressure
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'top'
    variable = pressure
    function = 0
  []
  [inlet_temp]
    type = FVNeumannBC
    boundary = 'bottom'
    variable = temperature
    value = 300
  []
[]

[Materials]
  [ins_fv]
    type = INSFVMaterial
    u = 'u'
    v = 'v'
    pressure = 'pressure'
    temperature = 'temperature'
    rho = ${rho}
  []
  [advected_material_property]
    type = ADGenericConstantMaterial
    prop_names = 'advected_rho cp'
    prop_values ='${rho} 1'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
  petsc_options_value = 'asm      200                lu           NONZERO'
  line_search = 'none'
  nl_rel_tol = 1e-12
[]

[Postprocessors]
  [inlet_mass_variable]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = advected_density
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [inlet_mass_constant]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = ${rho}
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [inlet_mass_matprop]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_mat_prop = 'advected_rho'
    fv = true
  []
  [mid1_mass]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_mass]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_mass]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []

  [inlet_momentum_x]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid1_momentum_x]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_momentum_x]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_momentum_x]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    advected_variable = u
    fv = true
    advected_interp_method = ${advected_interp_method}
  []

  [inlet_momentum_y]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid1_momentum_y]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [mid2_momentum_y]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []
  [outlet_momentum_y]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    advected_variable = v
    fv = true
    advected_interp_method = ${advected_interp_method}
  []

  [inlet_advected_energy]
    type = VolumetricFlowRate
    boundary = bottom
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
  []
  [mid1_advected_energy]
    type = InternalVolumetricFlowRate
    boundary = internal_bot
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
  []
  [mid2_advected_energy]
    type = InternalVolumetricFlowRate
    boundary = internal_top
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
  []
  [outlet_advected_energy]
    type = VolumetricFlowRate
    boundary = top
    vel_x = u
    vel_y = v
    advected_mat_prop = 'rho_cp_temp'
    fv = true
  []
[]

[Outputs]
  exodus = false
  csv = true
  inactive = 'console_mass console_momentum_x console_momentum_y console_energy'
  [console_mass]
    type = Console
    start_step = 1
    show = 'inlet_mass_variable inlet_mass_constant inlet_mass_matprop mid1_mass mid2_mass outlet_mass'
  []
  [console_momentum_x]
    type = Console
    start_step = 1
    show = 'inlet_momentum_x mid1_momentum_x mid2_momentum_x outlet_momentum_x'
  []
  [console_momentum_y]
    type = Console
    start_step = 1
    show = 'inlet_momentum_y mid1_momentum_y mid2_momentum_y outlet_momentum_y'
  []
  [console_energy]
    type = Console
    start_step = 1
    show = 'inlet_advected_energy mid1_advected_energy mid2_advected_energy outlet_advected_energy'
  []
[]

Overview
Input Parameters
Input Files

Install MOOSE

New Users

Examples and Tutorials

Application Usage

Physics and Syntax

Application Development

Framework Development

MOOSEDocs

Infrastructure

Questions

Information and Tools

INL Applications and Remote Access