NormalMortarLMMechanicalContact

Similar to the NormalNodalLMMechanicalContact object except the constraints are enforced in an integral way via the mortar method as opposed to pointwise at nodes. Some numerical experiments suggest that the integral method of enforcing normal contact constraints displays worse non-linear convergence than the pointwise method.

Enforces the normal contact complementarity conditions in a mortar discretization

Input Parameters

primary_boundaryThe name of the primary boundary sideset.
C++ Type:BoundaryName
Options:
Description:The name of the primary boundary sideset.
primary_subdomainThe name of the primary subdomain.
C++ Type:SubdomainName
Options:
Description:The name of the primary subdomain.
secondary_boundaryThe name of the secondary boundary sideset.
C++ Type:BoundaryName
Options:
Description:The name of the secondary boundary sideset.
secondary_subdomainThe name of the secondary subdomain.
C++ Type:SubdomainName
Options:
Description:The name of the secondary subdomain.

Required Parameters

compute_lm_residualsTrueWhether to compute Lagrange Multiplier residuals
Default:True
C++ Type:bool
Options:
Description:Whether to compute Lagrange Multiplier residuals
compute_primal_residualsTrueWhether to compute residuals for the primal variable.
Default:True
C++ Type:bool
Options:
Description:Whether to compute residuals for the primal variable.
interpolate_normalsTrueWhether to interpolate the nodal normals (e.g. classic idea of evaluating field at quadrature points). If this is set to false, then non-interpolated nodal normals will be used, and then the _normals member should be indexed with _i instead of _qp
Default:True
C++ Type:bool
Options:
Description:Whether to interpolate the nodal normals (e.g. classic idea of evaluating field at quadrature points). If this is set to false, then non-interpolated nodal normals will be used, and then the _normals member should be indexed with _i instead of _qp
ncp_function_typeminThe type of the nonlinear complimentarity function; options are min or fb where fb stands for Fischer-Burmeister
Default:min
C++ Type:MooseEnum
Options:min, fb
Description:The type of the nonlinear complimentarity function; options are min or fb where fb stands for Fischer-Burmeister
periodicFalseWhether this constraint is going to be used to enforce a periodic condition. This has the effect of changing the normals vector for projection from outward to inward facing
Default:False
C++ Type:bool
Options:
Description:Whether this constraint is going to be used to enforce a periodic condition. This has the effect of changing the normals vector for projection from outward to inward facing
primary_disp_yThe y displacement variable on the primary face
C++ Type:NonlinearVariableName
Options:
Description:The y displacement variable on the primary face
primary_variablePrimal variable on primary surface. If this parameter is not provided then the primary variable will be initialized to the secondary variable
C++ Type:VariableName
Options:
Description:Primal variable on primary surface. If this parameter is not provided then the primary variable will be initialized to the secondary variable
prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Options:
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
secondary_disp_yThe y displacement variable on the secondary face
C++ Type:NonlinearVariableName
Options:
Description:The y displacement variable on the secondary face
secondary_variablePrimal variable on secondary surface.
C++ Type:VariableName
Options:
Description:Primal variable on secondary surface.
variableThe name of the lagrange multiplier variable that this constraint is applied to. This parameter may not be supplied in the case of using penalty methods for example
C++ Type:NonlinearVariableName
Options:
Description:The name of the lagrange multiplier variable that this constraint is applied to. This parameter may not be supplied in the case of using penalty methods for example

Optional Parameters

control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Options:
Description:Determines whether this object is calculated using an implicit or explicit form
seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Options:
Description:The seed for the master random number generator
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Options:
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Options:
Description:The extra tags for the matrices this Kernel should fill
extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Options:
Description:The extra tags for the vectors this Kernel should fill
matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Description:The tag for the matrices this Kernel should fill
vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime, time
Description:The tag for the vectors this Kernel should fill

Tagging Parameters

Input Files

(modules/contact/test/tests/mechanical-small-problem/mortar-mech.i)
(modules/contact/test/tests/bouncing-block-contact/frictional-mortar-min-lm-mortar-disp.i)
(modules/contact/test/tests/bouncing-block-contact/frictionless-mortar-min-lm-mortar-disp.i)
(modules/contact/test/tests/bouncing-block-contact/frictionless-mortar-fb-lm-mortar-disp.i)
(modules/contact/test/tests/bouncing-block-contact/frictional-mortar-fb-lm-mortar-disp.i)

(modules/contact/test/tests/mechanical-small-problem/mortar-mech.i)

[Mesh]
  displacements = 'disp_x disp_y'
  [file]
    type = FileMeshGenerator
    file = mesh.e
  []
  [./primary]
    type = LowerDBlockFromSidesetGenerator
    sidesets = '2'
    new_block_id = '20'
    input = file
  [../]
  [./secondary]
    type = LowerDBlockFromSidesetGenerator
    sidesets = '1'
    new_block_id = '10'
    input = primary
  [../]
[]

[Problem]
  kernel_coverage_check = false
[]

[Variables]
  [./disp_x]
    block = '1 2'
  [../]
  [./disp_y]
    block = '1 2'
  [../]
  [./lambda]
    block = '10'
    family = MONOMIAL
    order = CONSTANT
  [../]
[]

[BCs]
  [./left_x]
    type = DirichletBC
    variable = disp_x
    boundary = 'outside_left'
    value = 0.0
  [../]
  [./left_y]
    type = DirichletBC
    variable = disp_y
    boundary = 'outside_left'
    value = 0.0
  [../]
  [./right_x]
    type = FunctionDirichletBC
    variable = disp_x
    boundary = 'outside_right'
    function = '-5e-3 * t'
  [../]
  [./right_y]
    type = FunctionDirichletBC
    variable = disp_y
    boundary = 'outside_right'
    function = 0
  [../]
[]

[Kernels]
  [disp_x]
    type = Diffusion
    variable = disp_x
    block = '1 2'
  []
  [disp_y]
    type = Diffusion
    variable = disp_y
    block = '1 2'
  []
[]

[Debug]
  show_var_residual_norms = 1
[]

[Constraints]
  [lm]
    type = NormalMortarLMMechanicalContact
    primary_boundary = '2'
    secondary_boundary = '1'
    primary_subdomain = '20'
    secondary_subdomain = '10'
    variable = lambda
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
  []
  [x]
    type = NormalMortarMechanicalContact
    primary_boundary = '2'
    secondary_boundary = '1'
    primary_subdomain = '20'
    secondary_subdomain = '10'
    variable = lambda
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [y]
    type = NormalMortarMechanicalContact
    primary_boundary = '2'
    secondary_boundary = '1'
    primary_subdomain = '20'
    secondary_subdomain = '10'
    variable = lambda
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
[]


[Preconditioning]
  [./smp]
    type = SMP
    full = true
  [../]
[]

[Executioner]
  solve_type = PJFNK
  type = Transient
  num_steps = 10
  dt = 1
  dtmin = 1
  petsc_options_iname = '-pc_type -snes_linesearch_type -pc_factor_shift_type -pc_factor_shift_amount'
  petsc_options_value = 'lu       basic                 NONZERO               1e-15'
[]

[Outputs]
  exodus = true
  [dofmap]
    type = DOFMap
    execute_on = 'initial'
  []
[]

(modules/contact/test/tests/bouncing-block-contact/frictional-mortar-min-lm-mortar-disp.i)

starting_point = 2e-1

# We offset slightly so we avoid the case where the bottom of the secondary block and the top of the
# primary block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarse mesh (basic line search handles that fine)
offset = 1e-2

[GlobalParams]
  displacements = 'disp_x disp_y'
  diffusivity = 1e0
  scaling = 1e0
[]

[Mesh]
  file = long-bottom-block-1elem-blocks.e
[]

[Variables]
  [./disp_x]
    block = '1 2'
    # order = SECOND
  [../]
  [./disp_y]
    block = '1 2'
    # order = SECOND
  [../]
  [./normal_lm]
    block = 3
    family = MONOMIAL
    order = CONSTANT
  [../]
  [./tangential_lm]
    block = 3
    family = MONOMIAL
    order = CONSTANT
  [../]
[]

[ICs]
  [./disp_y]
    block = 2
    variable = disp_y
    value = ${fparse starting_point + offset}
    type = ConstantIC
  [../]
[]

[Kernels]
  [./disp_x]
    type = MatDiffusion
    variable = disp_x
  [../]
  [./disp_y]
    type = MatDiffusion
    variable = disp_y
  [../]
[]


[Constraints]
  [normal_lm]
    type = NormalMortarLMMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
    ncp_function_type = min
  []
  [normal_x]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [normal_y]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [tangential_lm]
    type = TangentialMortarLMMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = tangential_lm
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
    contact_pressure = normal_lm
    friction_coefficient = .1
    ncp_function_type = min
  []
  [tangential_x]
    type = TangentialMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = tangential_lm
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [tangential_y]
    type = TangentialMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = tangential_lm
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
[]

[BCs]
  [./botx]
    type = DirichletBC
    variable = disp_x
    preset = false
    boundary = 40
    value = 0.0
  [../]
  [./boty]
    type = DirichletBC
    variable = disp_y
    preset = false
    boundary = 40
    value = 0.0
  [../]
  [./topy]
    type = FunctionDirichletBC
    variable = disp_y
    preset = false
    boundary = 30
    function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
  [../]
  [./leftx]
    type = FunctionDirichletBC
    variable = disp_x
    preset = false
    boundary = 50
    function = '1e-2 * t'
  [../]
[]

[Executioner]
  type = Transient
  end_time = 200
  dt = 5
  dtmin = .1
  solve_type = 'PJFNK'
  petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor -snes_ksp_ew'
  petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
  petsc_options_value = 'lu       NONZERO               1e-15                   1e-5'
  l_max_its = 30
  nl_max_its = 20
  line_search = 'none'
  snesmf_reuse_base = false
[]

[Debug]
  show_var_residual_norms = true
[]

[Outputs]
  exodus = true
[]

[Preconditioning]
  [./smp]
    type = SMP
    full = true
  [../]
[]

[Postprocessors]
  [./num_nl]
    type = NumNonlinearIterations
  [../]
  [./cumulative]
    type = CumulativeValuePostprocessor
    postprocessor = num_nl
  [../]
  [contact]
    type = ContactDOFSetSize
    variable = normal_lm
    subdomain = '3'
    execute_on = 'nonlinear timestep_end'
  []
[]

(modules/contact/test/tests/bouncing-block-contact/frictionless-mortar-min-lm-mortar-disp.i)

starting_point = 2e-1
offset = 1e-2

[GlobalParams]
  displacements = 'disp_x disp_y'
  diffusivity = 1e0
  scaling = 1e0
[]

[Mesh]
  file = long-bottom-block-1elem-blocks.e
[]

[Variables]
  [./disp_x]
    block = '1 2'
  [../]
  [./disp_y]
    block = '1 2'
  [../]
  [./normal_lm]
    block = 3
    family = MONOMIAL
    order = CONSTANT
  [../]
[]

[ICs]
  [./disp_y]
    block = 2
    variable = disp_y
    value = ${fparse starting_point + offset}
    type = ConstantIC
  [../]
[]

[Kernels]
  [./disp_x]
    type = MatDiffusion
    variable = disp_x
  [../]
  [./disp_y]
    type = MatDiffusion
    variable = disp_y
  [../]
[]


[Constraints]
  [normal_lm]
    type = NormalMortarLMMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
    ncp_function_type = 'min'
  []
  [normal_x]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [normal_y]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
[]

[BCs]
  [./botx]
    type = DirichletBC
    variable = disp_x
    preset = false
    boundary = 40
    value = 0.0
  [../]
  [./boty]
    type = DirichletBC
    variable = disp_y
    preset = false
    boundary = 40
    value = 0.0
  [../]
  [./topy]
    type = FunctionDirichletBC
    variable = disp_y
    preset = false
    boundary = 30
    function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
  [../]
  [./leftx]
    type = FunctionDirichletBC
    variable = disp_x
    preset = false
    boundary = 50
    function = '1e-2 * t'
  [../]
[]

[Executioner]
  type = Transient
  end_time = 200
  dt = 5
  dtmin = .1
  solve_type = 'PJFNK'
  petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor'
  petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
  petsc_options_value = 'lu       NONZERO               1e-15                   1e-5'
  l_max_its = 30
  nl_max_its = 20
  line_search = 'none'
  snesmf_reuse_base = false
[]

[Debug]
  show_var_residual_norms = true
[]

[Outputs]
  exodus = true
[]

[Preconditioning]
  [./smp]
    type = SMP
    full = true
  [../]
[]

[Postprocessors]
  active = 'num_nl cumulative contact'
  [./num_nl]
    type = NumNonlinearIterations
  [../]
  [./cumulative]
    type = CumulativeValuePostprocessor
    postprocessor = num_nl
  [../]
  [contact]
    type = ContactDOFSetSize
    variable = normal_lm
    subdomain = '3'
    execute_on = 'nonlinear timestep_end'
  []
[]

(modules/contact/test/tests/bouncing-block-contact/frictionless-mortar-fb-lm-mortar-disp.i)

starting_point = 2e-1
offset = 1e-2

[GlobalParams]
  displacements = 'disp_x disp_y'
  diffusivity = 1e0
  scaling = 1e0
[]

[Mesh]
  file = long-bottom-block-1elem-blocks.e
[]

[Variables]
  [./disp_x]
    block = '1 2'
  [../]
  [./disp_y]
    block = '1 2'
  [../]
  [./normal_lm]
    block = 3
    family = MONOMIAL
    order = CONSTANT
  [../]
[]

[ICs]
  [./disp_y]
    block = 2
    variable = disp_y
    value = ${fparse starting_point + offset}
    type = ConstantIC
  [../]
[]

[Kernels]
  [./disp_x]
    type = MatDiffusion
    variable = disp_x
  [../]
  [./disp_y]
    type = MatDiffusion
    variable = disp_y
  [../]
[]


[Constraints]
  [normal_lm]
    type = NormalMortarLMMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
    ncp_function_type = 'fb'
  []
  [normal_x]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [normal_y]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
[]

[BCs]
  [./botx]
    type = DirichletBC
    variable = disp_x
    boundary = 40
    value = 0.0
  [../]
  [./boty]
    type = DirichletBC
    variable = disp_y
    boundary = 40
    value = 0.0
  [../]
  [./topy]
    type = FunctionDirichletBC
    variable = disp_y
    boundary = 30
    function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
  [../]
  [./leftx]
    type = FunctionDirichletBC
    variable = disp_x
    boundary = 50
    function = '1e-2 * t'
  [../]
[]

[Executioner]
  type = Transient
  end_time = 200
  dt = 5
  dtmin = .1
  solve_type = 'PJFNK'
  petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor'
  petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
  petsc_options_value = 'lu       NONZERO               1e-15                   1e-5'
  l_max_its = 30
  nl_max_its = 20
  line_search = 'none'
  snesmf_reuse_base = false
[]

[Debug]
  show_var_residual_norms = true
[]

[Outputs]
  exodus = true
[]

[Preconditioning]
  [./smp]
    type = SMP
    full = true
  [../]
[]

[Postprocessors]
  active = 'num_nl cumulative contact'
  [./num_nl]
    type = NumNonlinearIterations
  [../]
  [./cumulative]
    type = CumulativeValuePostprocessor
    postprocessor = num_nl
  [../]
  [contact]
    type = ContactDOFSetSize
    variable = normal_lm
    subdomain = '3'
    execute_on = 'nonlinear timestep_end'
  []
[]

(modules/contact/test/tests/bouncing-block-contact/frictional-mortar-fb-lm-mortar-disp.i)

starting_point = 2e-1

# We offset slightly so we avoid the case where the bottom of the secondary block and the top of the
# primary block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarse mesh (basic line search handles that fine)
offset = 1e-2

[GlobalParams]
  displacements = 'disp_x disp_y'
  diffusivity = 1e0
  scaling = 1e0
[]

[Mesh]
  file = long-bottom-block-1elem-blocks.e
[]

[Variables]
  [./disp_x]
    block = '1 2'
    # order = SECOND
  [../]
  [./disp_y]
    block = '1 2'
    # order = SECOND
  [../]
  [./normal_lm]
    block = 3
    family = MONOMIAL
    order = CONSTANT
  [../]
  [./tangential_lm]
    block = 3
    family = MONOMIAL
    order = CONSTANT
  [../]
[]

[ICs]
  [./disp_y]
    block = 2
    variable = disp_y
    value = ${fparse starting_point + offset}
    type = ConstantIC
  [../]
[]

[Kernels]
  [./disp_x]
    type = MatDiffusion
    variable = disp_x
  [../]
  [./disp_y]
    type = MatDiffusion
    variable = disp_y
  [../]
[]


[Constraints]
  [normal_lm]
    type = NormalMortarLMMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
    ncp_function_type = fb
  []
  [normal_x]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [normal_y]
    type = NormalMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = normal_lm
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [tangential_lm]
    type = TangentialMortarLMMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = tangential_lm
    secondary_variable = disp_x
    secondary_disp_y = disp_y
    use_displaced_mesh = true
    compute_primal_residuals = false
    contact_pressure = normal_lm
    friction_coefficient = .1
    ncp_function_type = fb
  []
  [tangential_x]
    type = TangentialMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = tangential_lm
    secondary_variable = disp_x
    component = x
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
  [tangential_y]
    type = TangentialMortarMechanicalContact
    primary_boundary = 20
    secondary_boundary = 10
    primary_subdomain = 4
    secondary_subdomain = 3
    variable = tangential_lm
    secondary_variable = disp_y
    component = y
    use_displaced_mesh = true
    compute_lm_residuals = false
  []
[]

[BCs]
  [./botx]
    type = DirichletBC
    variable = disp_x
    boundary = 40
    value = 0.0
  [../]
  [./boty]
    type = DirichletBC
    variable = disp_y
    boundary = 40
    value = 0.0
  [../]
  [./topy]
    type = FunctionDirichletBC
    variable = disp_y
    boundary = 30
    function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
  [../]
  [./leftx]
    type = FunctionDirichletBC
    variable = disp_x
    boundary = 50
    function = '1e-2 * t'
  [../]
[]

[Executioner]
  type = Transient
  end_time = 200
  dt = 5
  dtmin = .1
  solve_type = 'PJFNK'
  petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor -snes_ksp_ew'
  petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
  petsc_options_value = 'lu       NONZERO               1e-15                   1e-5'
  l_max_its = 30
  nl_max_its = 20
  line_search = 'none'
  snesmf_reuse_base = false

  # [./Predictor]
  #   type = SimplePredictor
  #   scale = 1.0
  # [../]
[]

[Debug]
  show_var_residual_norms = true
[]

[Outputs]
  exodus = true
  # checkpoint = true
  # [./dofmap]
  #   type = DOFMap
  #   execute_on = 'initial'
  # [../]
[]

[Preconditioning]
  [./smp]
    type = SMP
    full = true
  [../]
[]

[Postprocessors]
  [./num_nl]
    type = NumNonlinearIterations
  [../]
  [./cumulative]
    type = CumulativeValuePostprocessor
    postprocessor = num_nl
  [../]
  [contact]
    type = ContactDOFSetSize
    variable = normal_lm
    subdomain = '3'
    execute_on = 'nonlinear timestep_end'
  []
[]

Input Parameters
Input Files

Install MOOSE

New Users

Examples and Tutorials

Application Usage

Physics and Syntax

Application Development

Framework Development

MOOSEDocs

Infrastructure

Questions

Information and Tools

INL Applications and Remote Access