Sodium Fluid Properties

Fluid properties for sodium

SodiumProperties inherits from the base class FluidProperties and provides the needed functionality for determining sodium fluid properties that may be used for coolant channel simulations.

The following methods are provided in this class:

  • Thermal Conductivity: k(temperature)

  • Enthalpy: h(temperature)

  • Heat capacity: heatCapacity(temperature)

  • Temperature: temperature(h)

  • Density: rho(temperature)

  • Derivative of Density w.r.t temperature: drho_dT(temperature)

  • Derivative of Density w.r.t enthalpy: drho_dh(h)

Properties of liquid sodium are obtained from ANL/RE-95/2 report "Thermodynamic and Transport Properties of Sodium Liquid and Vapor" from ANL Reactor Engineering Division.

Input Parameters

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL CUSTOM

    Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.

Optional Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector

    Options:

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Options:

    Description:Set the enabled status of the MooseObject.

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Options:

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • force_preauxFalseForces the GeneralUserObject to be executed in PREAUX

    Default:False

    C++ Type:bool

    Options:

    Description:Forces the GeneralUserObject to be executed in PREAUX

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters