- boundariesThe name of the boundary to mesh
Description:The name of the boundary to mesh
- inputThe mesh we want to modify
Description:The mesh we want to modify
- block_idSubdomain id to set for the new elements along the boundary
C++ Type:unsigned short
Description:Subdomain id to set for the new elements along the boundary
Add lower dimensional elements along the faces contained in a side set to set up mixed dimensional problems
Element sides are not explicitly meshed in MOOSE/libmesh, i.e. no shape functions live on the lower dimensional sides. To run kernels on lower dimensional manifolds they need to be explicitly meshed. That can be accomplished in a mesh generation tool like Cubit, or using this MeshGenerator.
In 3D simulations the appropriate 2D elements (And for 2D simulations 1D elements) will be meshed in at selected side sets (boundaries). The choice of lower dimensional side elements is dictated by the higher dimensional volume element types.
Coupling between side and volume meshes
The newly generated lower dimensional side elements will share nodes with the higher dimensional volumes elements. Coupling to the variables from volume elements in "just works".
Coupling in the other direction is not as straight forward. The lower dimensional variables exist on some nodes of the adjacent volume elements. The volume kernels will run on the volume quadrature points at which _tapered off_ values from the adjacent edges van be found. Use at your own risk.
- block_nameSubdomain name to set for the new elements along the boundary (optional)
Description:Subdomain name to set for the new elements along the boundary (optional)
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Description:Set the enabled status of the MooseObject.