ThermalContactBCsAction

under construction:Undocumented Class

The ThermalContactBCsAction has not been documented. The content contained on this page includes the basic documentation associated with an Action; however, what is contained is ultimately determined by what is necessary to make the documentation clear for users.

!syntax description /ThermalContact/ThermalContactBCsAction

Input Parameters

  • variableThe variable for thermal contact

    C++ Type:NonlinearVariableName

    Options:

    Description:The variable for thermal contact

  • slaveThe slave surface

    C++ Type:BoundaryName

    Options:

    Description:The slave surface

  • masterThe master surface

    C++ Type:BoundaryName

    Options:

    Description:The master surface

Required Parameters

  • disp_yThe y displacement

    C++ Type:std::vector

    Options:

    Description:The y displacement

  • gap_geometry_typeGap calculation type.

    C++ Type:MooseEnum

    Options:PLATE CYLINDER SPHERE

    Description:Gap calculation type.

  • save_inThe Auxiliary Variable to (optionally) save the boundary flux in

    C++ Type:std::vector

    Options:

    Description:The Auxiliary Variable to (optionally) save the boundary flux in

  • disp_zThe z displacement

    C++ Type:std::vector

    Options:

    Description:The z displacement

  • min_gap1e-06A minimum gap (denominator) size

    Default:1e-06

    C++ Type:double

    Options:

    Description:A minimum gap (denominator) size

  • warningsFalseWhether to output warning messages concerning nodes not being found

    Default:False

    C++ Type:bool

    Options:

    Description:Whether to output warning messages concerning nodes not being found

  • disp_xThe x displacement

    C++ Type:std::vector

    Options:

    Description:The x displacement

  • appended_property_nameName appended to material properties to make them unique

    C++ Type:std::string

    Options:

    Description:Name appended to material properties to make them unique

  • max_gap1e+06A maximum gap (denominator) size

    Default:1e+06

    C++ Type:double

    Options:

    Description:A maximum gap (denominator) size

  • active__all__ If specified only the blocks named will be visited and made active

    Default:__all__

    C++ Type:std::vector

    Options:

    Description:If specified only the blocks named will be visited and made active

  • quadratureFalseWhether or not to use quadrature point based gap heat transfer

    Default:False

    C++ Type:bool

    Options:

    Description:Whether or not to use quadrature point based gap heat transfer

  • inactiveIf specified blocks matching these identifiers will be skipped.

    C++ Type:std::vector

    Options:

    Description:If specified blocks matching these identifiers will be skipped.

  • emissivity_10The emissivity of the fuel surface

    Default:0

    C++ Type:double

    Options:

    Description:The emissivity of the fuel surface

  • sphere_originOrigin for sphere geometry

    C++ Type:libMesh::VectorValue

    Options:

    Description:Origin for sphere geometry

  • emissivity_20The emissivity of the cladding surface

    Default:0

    C++ Type:double

    Options:

    Description:The emissivity of the cladding surface

  • cylinder_axis_point_1Start point for line defining cylindrical axis

    C++ Type:libMesh::VectorValue

    Options:

    Description:Start point for line defining cylindrical axis

  • cylinder_axis_point_2End point for line defining cylindrical axis

    C++ Type:libMesh::VectorValue

    Options:

    Description:End point for line defining cylindrical axis

  • orderFIRSTThe finite element order

    Default:FIRST

    C++ Type:MooseEnum

    Options:CONSTANT FIRST SECOND THIRD FOURTH

    Description:The finite element order

  • displacementsThe displacements appropriate for the simulation geometry and coordinate system

    C++ Type:std::vector

    Options:

    Description:The displacements appropriate for the simulation geometry and coordinate system

Optional Parameters

References