- gap(Its an added distance between a perimetric pin and the duct: Edge Pitch W = pitch/2 - pin_diameter/2 + gap) [m]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:(Its an added distance between a perimetric pin and the duct: Edge Pitch W = pitch/2 - pin_diameter/2 + gap) [m]
- heated_lengthHeated length [m]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Heated length [m]
- n_cellsThe number of cells in the axial direction
C++ Type:unsigned int
Controllable:No
Description:The number of cells in the axial direction
- nxNumber of channels in the x direction [-]
C++ Type:unsigned int
Controllable:No
Description:Number of channels in the x direction [-]
- nyNumber of channels in the y direction [-]
C++ Type:unsigned int
Controllable:No
Description:Number of channels in the y direction [-]
- pin_diameterRod diameter [m]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Rod diameter [m]
- pitchPitch [m]
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Pitch [m]
SCMDetailedQuadSubChannelMeshGenerator
Creates a detailed mesh of subchannels in a square lattice arrangement
Overview
This is a mesh generator used for visualization purposes only. It is part of an input file that creates a 3D realistic mesh of the subchannels in a square lattice arrangement. This input file has a Problem block with the NoSolveProblem because it is not used to perform any calculations. It is used to create a detailed 3D mesh that the SCM solution gets projected on. The center of the mesh is the origin.
Input Parameters
- block_id0Block ID used for the mesh subdomain.
Default:0
C++ Type:unsigned int
Controllable:No
Description:Block ID used for the mesh subdomain.
- unheated_length_entry0Unheated length at entry [m]
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Unheated length at entry [m]
- unheated_length_exit0Unheated length at exit [m]
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Unheated length at exit [m]
Optional Parameters
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.
- save_with_nameKeep the mesh from this mesh generator in memory with the name specified
C++ Type:std::string
Controllable:No
Description:Keep the mesh from this mesh generator in memory with the name specified
Advanced Parameters
- nemesisFalseWhether or not to output the mesh file in the nemesisformat (only if output = true)
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to output the mesh file in the nemesisformat (only if output = true)
- outputFalseWhether or not to output the mesh file after generating the mesh
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to output the mesh file after generating the mesh
- show_infoFalseWhether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)