PolycrystalVoronoiVoidIC

The PolycrystalVoronoiVoidIC generates a Voronoi tessellation to produce a grain structure with voids randomly distributed along the grain boundaries. The centroids of grains can be either generated from a set of random points or assigned from a file. It requires the number of voids to be greater than zero. In general, you should use PolycrystalVoronoi to represent Voronoi grain structures without voids.

Typical usage in an input file:

[ICs<<<{"href": "../../syntax/Cardinal/ICs/index.html"}>>>]
  [c_IC]
    variable<<<{"description": "The variable this initial condition is supposed to provide values for."}>>> = c
    type = PolycrystalVoronoiVoidIC<<<{"description": "Random distribution of smooth circles with given minimum spacing", "href": "PolycrystalVoronoiVoidIC.html"}>>>
    structure_type<<<{"description": "Which structure type is being initialized, grains or voids"}>>> = voids
    polycrystal_ic_uo<<<{"description": "UserObject for obtaining the polycrystal grain structure."}>>> = voronoi
  []
[]

Description and Syntax

Random distribution of smooth circles with given minimum spacing

Input Parameters

bubspacminimum spacing of bubbles, measured from center to center
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:minimum spacing of bubbles, measured from center to center
invalueThe variable value inside the circle
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The variable value inside the circle
numbubThe number of bubbles to place
C++ Type:unsigned int
Controllable:No
Description:The number of bubbles to place
op_numNumber of order parameters
C++ Type:unsigned int
Controllable:No
Description:Number of order parameters
outvalueThe variable value outside the circle
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The variable value outside the circle
polycrystal_ic_uoUserObject for obtaining the polycrystal grain structure.
C++ Type:UserObjectName
Controllable:No
Description:UserObject for obtaining the polycrystal grain structure.
radiusMean radius value for the circles
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Mean radius value for the circles
structure_typeWhich structure type is being initialized, grains or voids
C++ Type:MooseEnum
Options:grains, voids
Controllable:No
Description:Which structure type is being initialized, grains or voids
variableThe variable this initial condition is supposed to provide values for.
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:The variable this initial condition is supposed to provide values for.

Required Parameters

3D_spheresTruein 3D, whether the objects are spheres or columns
Default:True
C++ Type:bool
Controllable:No
Description:in 3D, whether the objects are spheres or columns
blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
boundaryThe list of boundaries (ids or names) from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundaries (ids or names) from the mesh where this object applies
columnar_3DFalse3D microstructure will be columnar in the z-direction?
Default:False
C++ Type:bool
Controllable:No
Description:3D microstructure will be columnar in the z-direction?
file_nameFile containing grain centroids, if file_name is provided, the centroids from the file will be used.
C++ Type:FileName
Controllable:No
Description:File containing grain centroids, if file_name is provided, the centroids from the file will be used.
int_width0The interfacial width of the void surface. Defaults to sharp interface
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The interfacial width of the void surface. Defaults to sharp interface
numtries1000The number of tries
Default:1000
C++ Type:unsigned int
Controllable:No
Description:The number of tries
op_index0The index for the current order parameter, not needed if structure_type = voids
Default:0
C++ Type:unsigned int
Controllable:No
Description:The index for the current order parameter, not needed if structure_type = voids
profileCOSFunctional dependence for the interface profile
Default:COS
C++ Type:MooseEnum
Options:COS, TANH
Controllable:No
Description:Functional dependence for the interface profile
radius_variation0Plus or minus fraction of random variation in the bubble radius for uniform, standard deviation for normal
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Plus or minus fraction of random variation in the bubble radius for uniform, standard deviation for normal
radius_variation_typenoneType of distribution that random circle radii will follow
Default:none
C++ Type:MooseEnum
Options:uniform, normal, none
Controllable:No
Description:Type of distribution that random circle radii will follow
rand_seed12345Seed value for the random number generator
Default:12345
C++ Type:unsigned int
Controllable:No
Description:Seed value for the random number generator
stateCURRENTThis parameter is used to set old state solutions at the start of simulation. If specifying multiple states at the start of simulation, use one IC object for each state being specified. The states are CURRENT=0 OLD=1 OLDER=2. States older than 2 are not currently supported. When the user only specifies current state, the solution is copied to the old and older states, as expected. This functionality is mainly used for dynamic simulations with explicit time integration schemes, where old solution states are used in the velocity and acceleration approximations.
Default:CURRENT
C++ Type:MooseEnum
Options:CURRENT, OLD, OLDER
Controllable:No
Description:This parameter is used to set old state solutions at the start of simulation. If specifying multiple states at the start of simulation, use one IC object for each state being specified. The states are CURRENT=0 OLD=1 OLDER=2. States older than 2 are not currently supported. When the user only specifies current state, the solution is copied to the old and older states, as expected. This functionality is mainly used for dynamic simulations with explicit time integration schemes, where old solution states are used in the velocity and acceleration approximations.
zero_gradientFalseSet the gradient DOFs to zero. This can avoid numerical problems with higher order shape functions and overlapping circles.
Default:False
C++ Type:bool
Controllable:No
Description:Set the gradient DOFs to zero. This can avoid numerical problems with higher order shape functions and overlapping circles.

Optional Parameters

control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.
ignore_uo_dependencyFalseWhen set to true, a UserObject retrieved by this IC will not be executed before the this IC
Default:False
C++ Type:bool
Controllable:No
Description:When set to true, a UserObject retrieved by this IC will not be executed before the this IC

Advanced Parameters

prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Material Property Retrieval Parameters

(moose/modules/phase_field/test/tests/initial_conditions/PolycrystalVoronoiVoidIC_periodic.i)

[Mesh]
  type = GeneratedMesh
  dim = 2
  nx = 85
  ny = 85
  nz = 0
  xmax = 250
  ymax = 250
  zmax = 0
  elem_type = QUAD4
[]

[GlobalParams]
  op_num = 5
  grain_num = 5
  var_name_base = gr
  numbub = 15
  bubspac = 22
  radius = 8
  int_width = 10
  invalue = 1
  outvalue = 0.1
[]

[Variables]
  [c]
  []
  [w]
    scaling = 1.0e4
  []
  [PolycrystalVariables]
  []
[]

[ICs]
  [PolycrystalICs]
    [PolycrystalVoronoiVoidIC]
      polycrystal_ic_uo = voronoi
    []
  []
  [c_IC]
    variable = c
    type = PolycrystalVoronoiVoidIC
    structure_type = voids
    polycrystal_ic_uo = voronoi
  []
[]

[UserObjects]
  [voronoi]
    type = PolycrystalVoronoi
    rand_seed = 10
    int_width = 0
  []
[]

[BCs]
  [Periodic]
    [all]
      auto_direction = 'x y'
    []
  []
[]

[Problem]
  type = FEProblem
  solve = false
[]

[Executioner]
  type = Transient
  num_steps = 0
[]

[Outputs]
  exodus = true
[]

Typical usage in an input file :
Description and Syntax
Input Parameters