- file_baseThe desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
C++ Type:std::string
Description:The desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
Exodus
Object for output data in the Exodus II format
Overview
The Exodus output object is the preferred way to write out simulation results. It creates ExodusII formatted files that are easily read by Peacock, Paraview, Visit and other postprocessing applications.
ExodusII has many benefits over other formats. It is a binary format based on NetCDF so the files are compact. It also can store multiple timesteps worth of information within one file, reducing output file clutter and storage for simulation results. Only if the mesh changes (adaptivity, movement if outputting the displaced mesh) will a new file need to be written.
Most of the time to do Exodus output you can simply set exodus = true in your Outputs block. For more control you can add sub-block of Outputs and set type = Exodus. That gives you full access to the parameters described below.
Advanced Parameters
output_dimension
The output_dimension parameter allows you to override the default selection for the dimensionality of the output. This is normally not needed (MOOSE can usually figure out what the dimensionality should be), but there are special cases where you might want to set this option. In particular, if you are running a 2D simulation that is generating 3D displacement fields you will need to use output_dimension = 3 to force the dimension so that Peacock and Paraview can properly render those displacements.
Input Parameters
- additional_execute_onThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
- append_dateFalseWhen true the date and time are appended to the output filename.
Default:False
C++ Type:bool
Options:
Description:When true the date and time are appended to the output filename.
- append_date_formatThe format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
C++ Type:std::string
Options:
Description:The format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
- discontinuousFalseEnables discontinuous output format for Exodus files.
Default:False
C++ Type:bool
Options:
Description:Enables discontinuous output format for Exodus files.
- end_stepTime step at which this output object stop operating
C++ Type:int
Options:
Description:Time step at which this output object stop operating
- execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, FAILED, CUSTOM.
- output_linearFalseSpecifies whether output occurs on each linear residual evaluation
Default:False
C++ Type:bool
Options:
Description:Specifies whether output occurs on each linear residual evaluation
- output_nonlinearFalseSpecifies whether output occurs on each nonlinear residual evaluation
Default:False
C++ Type:bool
Options:
Description:Specifies whether output occurs on each nonlinear residual evaluation
- overwriteFalseWhen true the latest timestep will overwrite the existing file, so only a single timestep exists.
Default:False
C++ Type:bool
Options:
Description:When true the latest timestep will overwrite the existing file, so only a single timestep exists.
- sequenceFalseEnable/disable sequential file output (enabled by default when 'use_displace = true', otherwise defaults to false
Default:False
C++ Type:bool
Options:
Description:Enable/disable sequential file output (enabled by default when 'use_displace = true', otherwise defaults to false
- start_stepTime step at which this output object begins to operate
C++ Type:int
Options:
Description:Time step at which this output object begins to operate
- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Options:
Description:Enable/disable the use of the displaced mesh for outputting
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
- output_dimensiondefaultThe dimension of the output file
Default:default
C++ Type:MooseEnum
Options:default 1 2 3 problem_dimension
Description:The dimension of the output file
- output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
C++ Type:std::vector
Options:
Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
- padding3The number of for extension suffix (e.g., out.e-s002)
Default:3
C++ Type:unsigned int
Options:
Description:The number of for extension suffix (e.g., out.e-s002)
Advanced Parameters
- elemental_as_nodalFalseOutput elemental nonlinear variables as nodal
Default:False
C++ Type:bool
Options:
Description:Output elemental nonlinear variables as nodal
- execute_elemental_onControl the output of elemental variables
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:Control the output of elemental variables
- execute_input_onINITIALEnable/disable the output of the input file
Default:INITIAL
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:Enable/disable the output of the input file
- execute_nodal_onControl the output of nodal variables
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:Control the output of nodal variables
- execute_postprocessors_onControl of when postprocessors are output
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:Control of when postprocessors are output
- execute_scalars_onControl the output of scalar variables
C++ Type:ExecFlagEnum
Options:NONE INITIAL LINEAR NONLINEAR TIMESTEP_END TIMESTEP_BEGIN FINAL FAILED CUSTOM
Description:Control the output of scalar variables
- hideA list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector
Options:
Description:A list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
- scalar_as_nodalFalseOutput scalar variables as nodal
Default:False
C++ Type:bool
Options:
Description:Output scalar variables as nodal
- showA list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector
Options:
Description:A list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
Variables Parameters
- end_timeTime at which this output object stop operating
C++ Type:double
Options:
Description:Time at which this output object stop operating
- interval1The interval at which time steps are output to the solution file
Default:1
C++ Type:unsigned int
Options:
Description:The interval at which time steps are output to the solution file
- start_timeTime at which this output object begins to operate
C++ Type:double
Options:
Description:Time at which this output object begins to operate
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Options:
Description:Only export results at sync times
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector
Options:
Description:Times at which the output and solution is forced to occur
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Options:
Description:Time tolerance utilized checking start and end times
Timing Parameters
- fileThe name of the mesh file to read, for oversampling
C++ Type:MeshFileName
Options:
Description:The name of the mesh file to read, for oversampling
- positionSet a positional offset, this vector will get added to the nodal coordinates to move the domain.
C++ Type:libMesh::Point
Options:
Description:Set a positional offset, this vector will get added to the nodal coordinates to move the domain.
- refinements0Number of uniform refinements for oversampling (refinement levels beyond any uniform refinements)
Default:0
C++ Type:unsigned int
Options:
Description:Number of uniform refinements for oversampling (refinement levels beyond any uniform refinements)
Oversampling Parameters
- linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals
Default:1000
C++ Type:double
Options:
Description:Number of divisions applied to time step when outputting linear residuals
- linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation
C++ Type:double
Options:
Description:Specifies an end time to begin output on each linear residual evaluation
- linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation
C++ Type:double
Options:
Description:Specifies a start time to begin output on each linear residual evaluation
- nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals
Default:1000
C++ Type:double
Options:
Description:Number of divisions applied to time step when outputting non-linear residuals
- nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation
C++ Type:double
Options:
Description:Specifies an end time to begin output on each nonlinear residual evaluation
- nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation
C++ Type:double
Options:
Description:Specifies a start time to begin output on each nonlinear residual evaluation
Petsc Parameters
- output_material_propertiesFalseFlag indicating if material properties should be output
Default:False
C++ Type:bool
Options:
Description:Flag indicating if material properties should be output
- show_material_propertiesList of materialproperties that should be written to the output
C++ Type:std::vector
Options:
Description:List of materialproperties that should be written to the output
Materials Parameters
Input Files
- test/tests/auxkernels/element_aux_var/elemental_sort_test.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_force_step_sm.i
- modules/combined/test/tests/solid_mechanics/pressure/sm/pressure_rz_test_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_aug.i
- modules/combined/test/tests/gap_heat_transfer_htonly/gap_heat_transfer_htonly_it_plot_test.i
- test/tests/outputs/intervals/no_final_repeat.i
- modules/richards/test/tests/gravity_head_1/gh_fu_01.i
- test/tests/materials/output/output_multiple_files.i
- test/tests/outputs/oversample/over_sampling_test_gen.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template1_sm.i
- modules/phase_field/test/tests/KKS_system/kks_example.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_kinematic_sm.i
- modules/navier_stokes/test/tests/ins/mms/pspg/pspg_mms_test.i
- modules/combined/test/tests/solid_mechanics/abaqus_implicit_creep/abaqus_implicit_creep.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template1.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart2.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_mu_0_2_pen_sm.i
- test/tests/outputs/intervals/sync_times.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_mu_0_2_pen_sm.i
- modules/combined/test/tests/sliding_block/sliding/dirac/sm/frictionless_kinematic_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template2.i
- modules/combined/test/tests/evolving_mass_density/shear_test_tensors.i
- test/tests/outputs/exodus/exodus_input.i
- modules/solid_mechanics/test/tests/temperature_dependent_hardening/temp_dep_hardening.i
- modules/contact/test/tests/bouncing-block-contact/bouncing-block-ranfs.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_mu_0_2_pen.i
- modules/tensor_mechanics/test/tests/beam/eigenstrain/eigenstrain_from_var.i
- modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictional_02_penalty_sm.i
- modules/tensor_mechanics/test/tests/czm/czm_3DC_3D_base_input.i
- test/tests/outputs/misc/warehouse_access.i
- test/tests/mesh/centroid_partitioner/centroid_partitioner_test.i
- test/tests/outputs/output_interface/marker.i
- test/tests/outputs/oversample/ex02_adapt.i
- test/tests/materials/stateful_prop/stateful_prop_spatial_test.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_mu_0_2_pen.i
- modules/combined/test/tests/sliding_block/sliding/constraint/frictionless_kinematic.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_penalty_dirac_sm.i
- modules/combined/examples/phase_field-mechanics/kks_mechanics_KHS.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template2_sm.i
- python/peacock/tests/common/oversample.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template1_sm.i
- test/tests/outputs/iterative/iterative_steady_sequence.i
- test/tests/outputs/displacement/displacement_transient_test.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_mu_0_2_pen.i
- modules/solid_mechanics/test/tests/reaction_prescribed_disp/reaction.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_kinematic_dirac.i
- modules/richards/test/tests/uo_egs/seff2.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_mu_0_2_pen_sm.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_kinematic_sm.i
- modules/combined/test/tests/simple_contact/sm/merged_sm.i
- modules/combined/test/tests/gravity/gravity_rz_quad8.i
- test/tests/ics/component_ic/component_ic.i
- modules/tensor_mechanics/test/tests/weak_plane_tensile/large_deform1.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_lm.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_mu_0_2_pen.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_aug_sm.i
- test/tests/outputs/exodus/exodus_nodal.i
- modules/combined/test/tests/fieldsplit_contact/2blocks3d.i
- modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_patch_rz_smp_sm.i
- modules/heat_conduction/test/tests/meshed_gap_thermal_contact/meshed_gap_thermal_contact.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template2.i
- modules/combined/test/tests/hertz_contact/hertz_contact_rz.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictional_04_penalty_sm.i
- modules/combined/test/tests/contact_verification/overclosure_removal/overclosure.i
- modules/combined/test/tests/sliding_block/sliding/dirac/frictional_04_penalty.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template2.i
- modules/combined/test/tests/gravity/gravity_qp_select_sm.i
- tutorials/darcy_thermo_mech/step09_mechanics/problems/step9.i
- test/tests/auxkernels/linear_combination/test.i
- modules/combined/test/tests/simple_contact/sm/simple_contact_test_sm.i
- modules/tensor_mechanics/test/tests/ad_pressure/pressure_test.i
- modules/richards/test/tests/user_objects/uo4.i
- modules/combined/test/tests/elastic_patch/ad_elastic_patch_rz.i
- modules/combined/test/tests/gravity/gravity_hex20_sm.i
- modules/combined/test/tests/contact_verification/hertz_cyl/quart_symm_q8/hertz_cyl_qsym_1deg_template1.i
- test/tests/coord_type/coord_type_rz_integrated.i
- test/tests/outputs/oversample/over_sampling_second_file.i
- modules/combined/test/tests/power_law_hardening/sm/PowerLawHardening_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template2.i
- modules/navier_stokes/test/tests/ins/RZ_cone/RZ_cone_no_parts.i
- modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictional_02_aug_sm.i
- modules/combined/test/tests/simple_contact/simple_contact_dirac_test.i
- modules/richards/test/tests/user_objects/uo1.i
- test/tests/outputs/iterative/output_end_step.i
- test/tests/outputs/iterative/output_start_step.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_mu_0_2_pen.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template1.i
- modules/phase_field/test/tests/new_initial_conditions/SmoothCircleIC_tanh.i
- test/tests/outputs/oversample/adapt.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_mu_0_2_pen.i
- test/tests/materials/output/output_via_outputs.i
- modules/navier_stokes/test/tests/ins/mms/supg/supg_pspg_adv_dominated_mms.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template1_sm.i
- python/peacock/tests/common/transient_with_date.i
- test/tests/materials/stateful_prop/computing_initial_residual_test.i
- modules/porous_flow/test/tests/infiltration_and_drainage/rd01.i
- modules/phase_field/examples/measure_interface_energy/1Dinterface_energy.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_mu_0_2_pen_sm.i
- test/tests/materials/ad_material/ad_stateful_material.i
- modules/combined/test/tests/simple_contact/simple_contact_test.i
- modules/combined/test/tests/simplest_contact/simplest_contact_test.i
- modules/solid_mechanics/test/tests/cracking/cracking.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template2.i
- modules/tensor_mechanics/test/tests/weak_plane_shear/large_deform1.i
- test/tests/transfers/multiapp_projection_transfer/fromsub_master.i
- modules/combined/test/tests/gravity/gravity_rz_sm.i
- test/tests/transfers/multiapp_nearest_node_transfer/fromsub_displaced_sub.i
- modules/combined/test/tests/sliding_block/sliding/constraint/frictional_02_penalty.i
- modules/combined/test/tests/gravity/gravity_rz_quad8_sm.i
- modules/porous_flow/test/tests/buckley_leverett/bl01.i
- test/tests/outputs/intervals/no_intermediate.i
- modules/heat_conduction/test/tests/meshed_gap_thermal_contact/meshed_annulus_thermal_contact.i
- modules/tensor_mechanics/test/tests/mohr_coulomb/uni_axial2_planar.i
- modules/combined/test/tests/thermo_mech/thermo_mech_smp.i
- modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_jacobian_rz_smp.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_kinematic.i
- modules/navier_stokes/test/tests/scalar_adr/supg/2d_advection_error_testing.i
- test/tests/outputs/iterative/iterative_start_time.i
- test/tests/outputs/postprocessor/postprocessor_invalid.i
- modules/combined/test/tests/sliding_block/sliding/constraint/frictional_04_penalty.i
- modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sm/sliding_elastic_blocks_2d_tp_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template2.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/frictionless_kinematic.i
- test/tests/restart/restart_add_variable/transient_with_stateful.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_penalty.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template1.i
- modules/phase_field/examples/multiphase/GrandPotential3Phase.i
- modules/combined/test/tests/simple_contact/sm/simple_contact_dirac_test_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template1_sm.i
- modules/solid_mechanics/test/tests/cracking/cracking_rz.i
- modules/tensor_mechanics/test/tests/anisotropic_patch/anisotropic_patch_test.i
- test/tests/outputs/error/none_reserved.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictionless_kinematic_sm.i
- modules/combined/test/tests/sliding_block/sliding/dirac/sm/frictional_04_penalty_sm.i
- modules/combined/test/tests/hertz_contact/hertz_contact.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_mu_0_2_pen.i
- modules/tensor_mechanics/test/tests/gravity/ad_gravity_test.i
- test/tests/outputs/displacement/displacement_test.i
- modules/phase_field/test/tests/free_energy_material/RegularSolutionFreeEnergy_plog.i
- modules/richards/test/tests/buckley_leverett/bl22_lumped_fu.i
- modules/navier_stokes/test/tests/ins/RZ_cone/RZ_cone_high_reynolds.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template1_sm.i
- modules/contact/test/tests/bouncing-block-contact/tied-nodes.i
- tutorials/darcy_thermo_mech/step07_adaptivity/problems/step7d_adapt_blocks.i
- examples/ex02_kernel/ex02_oversample.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_mu_0_2_pen.i
- modules/phase_field/test/tests/free_energy_material/RegularSolutionFreeEnergy_const_T.i
- modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q8/hertz_cyl_half_1deg_template3.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template2_sm.i
- modules/combined/test/tests/evolving_mass_density/uniform_expand_compress_test_tensors.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/frictional_02_penalty.i
- modules/combined/test/tests/power_law_hardening/PowerLawHardening.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_mu_0_2_pen_sm.i
- modules/combined/test/tests/contact_verification/hertz_cyl/quart_symm_q4/hertz_cyl_qsym_1deg_template1.i
- test/tests/vectorpostprocessors/line_material_sampler/line_material_real_sampler.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template2_sm.i
- modules/porous_flow/test/tests/flux_limited_TVD_advection/fltvd_2D_angle.i
- modules/navier_stokes/test/tests/ins/velocity_channel/velocity_inletBC_by_parts.i
- test/tests/transfers/multiapp_projection_transfer/tosub_sub.i
- test/tests/outputs/oversample/ex02_oversample.i
- modules/richards/test/tests/buckley_leverett/bl22.i
- test/tests/outputs/exodus/variable_toggles.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictional_04_penalty.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_mu_0_2_pen.i
- modules/phase_field/test/tests/phase_field_kernels/CahnHilliard.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template2_sm.i
- modules/combined/test/tests/sliding_block/sliding/dirac/frictionless_kinematic.i
- modules/solid_mechanics/test/tests/cracking/cracking_function.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template1_sm.i
- test/tests/outputs/displaced/non_displaced_fallback.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_mu_0_2_pen_sm.i
- test/tests/outputs/output_interface/indicator.i
- test/tests/mesh/adapt/displaced_adapt_test.i
- modules/phase_field/test/tests/initial_conditions/SmoothCircleIC.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_mu_0_2_pen_sm.i
- test/tests/restart/restart_add_variable/add_variable_restart.i
- test/tests/outputs/misc/default_names.i
- modules/navier_stokes/test/tests/ins/RZ_cone/RZ_cone_by_parts.i
- test/tests/postprocessors/side_pps/side_pps_multi_bnd_test.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_penalty_dirac.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_mu_0_2_pen.i
- modules/combined/test/tests/sliding_block/sliding/dirac/sm/frictionless_penalty_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template1.i
- test/tests/outputs/iterative/output_step_window.i
- modules/contact/test/tests/bouncing-block-contact/grid-sequencing/grid-sequencing.i
- modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_jacobian_rz_smp_sm.i
- modules/solid_mechanics/test/tests/material_limit_time_step/creep/nafems_test5a_lim_no_comb.i
- test/tests/outputs/append_date/append_date.i
- modules/combined/test/tests/sliding_block/sliding/dirac/frictional_02_penalty.i
- test/tests/outputs/postprocessor/postprocessor.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/frictionless_penalty.i
- test/tests/outputs/oversample/oversample.i
- modules/contact/test/tests/bouncing-block-contact/frictional-nodal-min-lm-mortar-disp.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart2_sm.i
- test/tests/outputs/iterative/iterative_steady.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template2_sm.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_force_step.i
- modules/heat_conduction/test/tests/meshed_gap_thermal_contact/meshed_gap_thermal_contact_constant_conductance.i
- test/tests/restart/new_dt/new_dt_restart.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictional_02_penalty_sm.i
- modules/solid_mechanics/test/tests/CLSH_smallstrain/CLSH_smallstrain.i
- modules/solid_mechanics/test/tests/umat_linear_strain_hardening/umat_linear_strain_hardening.i
- tutorials/darcy_thermo_mech/step11_action/problems/step11.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template2.i
- test/tests/outputs/intervals/intervals.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change.i
- modules/phase_field/test/tests/free_energy_material/MathFreeEnergy.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template1_sm.i
- modules/phase_field/test/tests/actions/conserved_direct_1var_variable_mob.i
- modules/solid_mechanics/test/tests/abaqus_creep_swelling/abaqus_creep_swelling.i
- modules/tensor_mechanics/test/tests/pressure/pressure_test.i
- modules/phase_field/test/tests/free_energy_material/MathEBFreeEnergy.i
- modules/richards/test/tests/buckley_leverett/bl22_lumped.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_mu_0_2_pen_sm.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_penalty.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_sm.i
- test/tests/auxkernels/element_aux_var/element_high_order_aux_test.i
- python/chigger/tests/input/sub.i
- modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D_angle.i
- modules/phase_field/test/tests/actions/conserved_direct_1var.i
- modules/tensor_mechanics/test/tests/recompute_radial_return/isotropic_plasticity_finite_strain.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_mu_0_2_pen_sm.i
- modules/combined/test/tests/simple_contact/simple_contact_rz_test.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_penalty.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_mu_0_2_pen_sm.i
- modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_patch_rz_smp.i
- modules/tensor_mechanics/test/tests/mohr_coulomb/uni_axial3_planar.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictional_02_penalty_sm.i
- modules/solid_mechanics/test/tests/LSH_smallstrain/LSH_smallstrain_rz_test.i
- modules/combined/test/tests/fieldsplit_contact/2blocks3d_sm.i
- modules/phase_field/test/tests/initial_conditions/BimodalSuperellipsoidsIC.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictional_04_penalty_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template2_sm.i
- modules/phase_field/test/tests/phase_field_kernels/SimpleCHInterface.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictionless_penalty_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template1.i
- modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q4/hertz_cyl_half_1deg_template1.i
- modules/porous_flow/test/tests/dirackernels/bh07.i
- modules/navier_stokes/test/tests/ins/mms/supg/supg_adv_dominated_mms.i
- modules/combined/test/tests/thermo_mech/thermo_mech_smp_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template2_sm.i
- tutorials/darcy_thermo_mech/step10_multiapps/problems/step10.i
- modules/phase_field/test/tests/MultiPhase/crosstermfreeenergy.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_kinematic_dirac.i
- test/tests/variables/time_derivatives_neighbor/test.i
- modules/solid_mechanics/test/tests/penalty_dirichlet/penalty_dirichlet.i
- test/tests/auxkernels/nodal_aux_var/nodal_sort_test.i
- test/tests/auxkernels/element_aux_var/l2_element_aux_var_test.i
- modules/porous_flow/test/tests/sinks/s10.i
- modules/combined/test/tests/simple_contact/sm/simple_contact_rz_dirac_test_sm.i
- test/tests/outputs/error/duplicate_output_files.i
- test/tests/executioners/transient_sync_time/transient_time_interval_output_test.i
- modules/combined/test/tests/elastic_patch/elastic_patch_rz_sm.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_penalty_contact_line_search.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template1_sm.i
- modules/navier_stokes/test/tests/scalar_adr/supg/advection_error_testing.i
- modules/combined/test/tests/solid_mechanics/pressure/pressure_test.i
- modules/combined/test/tests/simple_contact/simple_contact_rz_dirac_test.i
- modules/tensor_mechanics/test/tests/2D_different_planes/gps_xy.i
- modules/phase_field/test/tests/mobility_derivative/mobility_derivative_direct_coupled_test.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_mu_0_2_pen.i
- test/tests/materials/material/material_test.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_penalty_dirac_sm.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_kinematic_dirac_sm.i
- modules/tensor_mechanics/test/tests/recompute_radial_return/uniaxial_viscoplasticity_incrementalstrain.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template2_sm.i
- modules/contact/test/tests/bouncing-block-contact/frictionless-nodal-reduced-active-set.i
- test/tests/variables/fe_monomial_const/monomial-const-3d.i
- modules/combined/test/tests/simple_contact/sm/simple_contact_rz_test_sm.i
- modules/combined/test/tests/elastic_patch/elastic_patch_rz.i
- modules/tensor_mechanics/test/tests/coupled_pressure/coupled_pressure_test.i
- test/tests/outputs/exodus/invalid_hide_variables.i
- test/tests/outputs/intervals/multiple_sync_times.i
- modules/combined/test/tests/gravity/gravity_hex20.i
- modules/porous_flow/test/tests/infiltration_and_drainage/wli02.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template2.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template2.i
- modules/porous_flow/test/tests/infiltration_and_drainage/rd03.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template1_sm.i
- test/tests/kernels/vector_dot_dot/vector_test.i
- modules/richards/test/tests/uo_egs/seff1.i
- modules/phase_field/test/tests/initial_conditions/SmoothSuperellipsoidIC.i
- modules/porous_flow/test/tests/infiltration_and_drainage/wli01.i
- modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sliding_elastic_blocks_2d.i
- test/tests/transfers/transfer_on_final/sub.i
- modules/phase_field/examples/interfacekernels/interface_gradient.i
- modules/porous_flow/test/tests/infiltration_and_drainage/bw01.i
- modules/rdg/test/tests/advection_1d/block_restrictable.i
- modules/combined/test/tests/gravity/gravity_rz.i
- modules/level_set/test/tests/transfers/markers/single_level/sub.i
- test/tests/outputs/displacement/displaced_eq_transient_test.i
- modules/porous_flow/test/tests/infiltration_and_drainage/rsc01.i
- python/chigger/tests/simple/sub.i
- modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sm/sliding_elastic_blocks_2d_sm.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_penalty_sm.i
- modules/combined/test/tests/hertz_contact/hertz_contact_hex20.i
- modules/combined/examples/phase_field-mechanics/kks_mechanics_VTS.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_mu_0_2_pen.i
- test/tests/outputs/output_dimension/output_dimension.i
- test/tests/mesh/custom_partitioner/custom_linear_partitioner_test.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template1_sm.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictional_02_penalty.i
- modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictionless_kinematic_sm.i
- modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictional_04_penalty_sm.i
- modules/solid_mechanics/test/tests/PLSH_smallstrain/PLSH_smallstrain.i
- modules/combined/test/tests/evolving_mass_density/expand_compress_test_tensors.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template2.i
- modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q4/hertz_cyl_half_1deg_template3.i
- modules/solid_mechanics/test/tests/rotation/rotation_test.i
- modules/combined/test/tests/solid_mechanics/pressure/sm/pressure_test_sm.i
- test/tests/outputs/oversample/oversample_file.i
- test/tests/materials/output/output_block_displaced.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template2.i
- test/tests/outputs/exodus/exodus_discontinuous.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_mu_0_2_pen.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_mu_0_2_pen_sm.i
- modules/phase_field/test/tests/free_energy_material/RegularSolutionFreeEnergy.i
- test/tests/transfers/transfer_on_final/master.i
- modules/combined/test/tests/sliding_block/in_and_out/dirac/frictional_04_penalty.i
- modules/porous_flow/test/tests/infiltration_and_drainage/rd02.i
- modules/porous_flow/test/tests/infiltration_and_drainage/rsc02.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template1_sm.i
- modules/combined/test/tests/simplest_contact/sm/simplest_contact_test_sm.i
- modules/solid_mechanics/test/tests/material_limit_time_step/creep/nafems_test5a_lim.i
- modules/combined/test/tests/simplest_contact/sm/simplest_contact_skew_test_sm.i
- modules/phase_field/test/tests/initial_conditions/SpecifiedSmoothSuperellipsoidIC.i
- test/tests/outputs/error/duplicate_outputs.i
- modules/richards/test/tests/user_objects/uo3.i
- modules/tensor_mechanics/test/tests/temperature_dependent_hardening/temp_dep_hardening.i
- modules/phase_field/test/tests/initial_conditions/BimodalInverseSuperellipsoidsIC.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template1.i
- test/tests/outputs/intervals/no_output.i
- test/tests/outputs/exodus/hide_variables.i
- test/tests/adaptivity/max_h_level/max_h_level.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_mu_0_2_pen_sm.i
- modules/tensor_mechanics/test/tests/crystal_plasticity/rot-eg1.i
- test/tests/outputs/iterative/iterative.i
- modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sliding_elastic_blocks_2d_tp.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template2.i
- modules/combined/test/tests/simplest_contact/simplest_contact_skew_test.i
- modules/combined/test/tests/gravity/gravity_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template2_sm.i
- test/tests/ics/function_ic/spline_function.i
- modules/rdg/test/tests/advection_1d/1d_aefv_square_wave.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template1_sm.i
- modules/tensor_mechanics/test/tests/elastic_patch/elastic_patch_quadratic.i
- modules/combined/test/tests/sliding_block/sliding/constraint/frictionless_aug.i
- modules/porous_flow/test/tests/infiltration_and_drainage/bw02.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_lm_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template1_sm.i
- modules/combined/test/tests/elastic_patch/elastic_patch_rz_large_strain_sm.i
- modules/combined/test/tests/sliding_block/sliding/constraint/frictionless_penalty.i
- modules/navier_stokes/test/tests/ins/mms/supg/supg_mms_test.i
- test/tests/outputs/variables/output_vars_test.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template2.i
- modules/tensor_mechanics/test/tests/material_limit_time_step/creep/nafems_test5a_lim.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_penalty_contact_line_search_sm.i
- modules/tensor_mechanics/test/tests/recompute_radial_return/isotropic_plasticity_errors.i
- test/tests/outputs/oversample/over_sampling_test_file.i
- modules/tensor_mechanics/test/tests/2D_different_planes/planestrain_xy.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_mu_0_2_pen_sm.i
- modules/combined/test/tests/simple_contact/merged.i
- test/tests/outputs/exodus/variable_output_test.i
- modules/combined/test/tests/simple_contact/sm/merged_rz_sm.i
- modules/navier_stokes/test/tests/ins/velocity_channel/velocity_inletBC_no_parts.i
- modules/combined/test/tests/sliding_block/sliding/constraint/frictional_02_aug.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_aug_sm.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_kinematic.i
- modules/combined/test/tests/sliding_block/in_and_out/constraint/frictional_lm.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template2.i
- test/tests/meshgenerators/centroid_partitioner/centroid_partitioner_mg.i
- test/tests/ics/function_ic/parsed_function.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template2_sm.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_kinematic_sm.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart1_sm.i
- test/tests/variables/previous_newton_iteration/test.i
- test/tests/postprocessors/displaced_mesh/elemental.i
- modules/combined/test/tests/sliding_block/sliding/dirac/frictionless_penalty.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_kinematic.i
- modules/phase_field/test/tests/actions/both_direct_2vars.i
- test/tests/postprocessors/displaced_mesh/side.i
- test/tests/outputs/exodus/exodus_enable_initial.i
- modules/richards/test/tests/uo_egs/relperm.i
- test/tests/materials/multiple_materials/multiple_materials_test.i
- modules/solid_mechanics/test/tests/LSH_smallstrain/LSH_smallstrain_test.i
- modules/combined/test/tests/gravity/gravity.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_penalty_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_aug.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template2_sm.i
- modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart1.i
- test/tests/outputs/overwrite/overwrite.i
- test/tests/mesh/custom_partitioner/custom_linear_partitioner_test_displacement.i
- modules/combined/test/tests/hertz_contact/hertz_contact_rz_quad8.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_penalty_dirac.i
- test/tests/outputs/iterative/iterative_inline.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template1_sm.i
- modules/combined/test/tests/solid_mechanics/pressure/pressure_rz_test.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_mu_0_2_pen.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_mu_0_2_pen_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_mu_0_2_pen_sm.i
- test/tests/outputs/variables/show_hide.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template2_sm.i
- test/tests/variables/fe_monomial_const/monomial-const-1d.i
- modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q8/hertz_cyl_half_1deg_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template2_sm.i
- test/tests/materials/output/limited_via_outputs.i
- test/tests/outputs/exodus/exodus.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template2_sm.i
- test/tests/userobjects/geometry_snap/geometrysphere.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template1.i
- test/tests/materials/output/block_via_outputs.i
- modules/richards/test/tests/user_objects/uo2.i
- modules/combined/test/tests/gravity/gravity_qp_select.i
- test/tests/postprocessors/element_average_value/elem_pps_multi_block_test.i
- modules/phase_field/test/tests/initial_conditions/HexPolycrystalIC.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template2.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template2_sm.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_kinematic_dirac_sm.i
- modules/combined/test/tests/evolving_mass_density/rz_tensors.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_mu_0_2_pen_sm.i
- test/tests/outputs/error/all_reserved.i
- modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictionless_aug_sm.i
- test/tests/variables/fe_monomial_const/monomial-const-2d.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_mu_0_2_pen.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template2.i
- modules/richards/test/tests/uo_egs/density.i
- modules/tensor_mechanics/test/tests/gravity/gravity_test.i
- test/tests/outputs/position/position.i
- modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_penalty_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_mu_0_2_pen.i
- test/tests/materials/material/material_check_test.i
- test/tests/mesh/subdomain_partitioner/subdomain_partitioner.i
- modules/solid_mechanics/examples/bridge/bridge_large_strain.i
- modules/solid_mechanics/test/tests/cracking/cracking_plane_stress.i
- test/tests/auxkernels/element_aux_var/element_aux_var_test.i
- modules/solid_mechanics/examples/bridge/bridge.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template1_sm.i
- modules/combined/test/tests/glued_contact_constraint/glued_contact_constraint.i
- modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictionless_penalty_sm.i
- modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template1.i
- test/tests/outputs/intervals/output_final.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template1.i
- modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template1_sm.i
- test/tests/outputs/displaced/displaced_adapt_test.i
- modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template2_sm.i
- test/tests/materials/material/bnd_material_test.i
test/tests/auxkernels/element_aux_var/elemental_sort_test.i
[Mesh]
file = square.e
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./one]
order = CONSTANT
family = MONOMIAL
initial_condition = 0
[../]
[./two]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
# Intentionally out of order to test sorting capabiilties
active = 'one two'
[./two]
variable = two
type = CoupledAux
value = 2
operator = '/'
coupled = one
[../]
[./one]
variable = one
type = ConstantAux
value = 1
[../]
[./five]
type = ConstantAux
variable = five
boundary = '1 2'
value = 5
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_force_step_sm.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
order = FIRST
family = LAGRANGE
block = 1
[]
[Mesh]
file = 1hex8_10mm_cube.e
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
data_file = blip.csv
format = columns
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
initial_condition = 300.0
[../]
[]
[AuxVariables]
[./vonmises_stress]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[AuxKernels]
[./vonmises_stress]
type = MaterialTensorAux
tensor = stress
variable = vonmises_stress
quantity = vonmises
execute_on = timestep_end
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elastic]
type = Elastic
youngs_modulus = 300e6
poissons_ratio = .3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
thermal_expansion = 5e-6
formulation = Nonlinear3D
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
start_time = 0.0
num_steps = 50000
end_time = 5.1e3
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e20
force_step_every_function_point = true
dt = 1e2
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'initial timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[]
modules/combined/test/tests/solid_mechanics/pressure/sm/pressure_rz_test_sm.i
#
# Pressure Test
#
# This test is taken from the Abaqus verification manual:
# "1.3.4 Axisymmetric solid elements"
#
# The two lower nodes are not allowed to translate in the z direction.
# Step 1:
# Pressure of 1000 is applied on each face.
# Step 2:
# Step 1 load plus a pressure on the vertical faces that varies from
# 0 to 1000 from top to bottom.
#
# Solution:
# Step 1:
# Stress xx, yy, zz = -1000
# Stress xy = 0
# Step 2:
# Stress xx, zz = -1500
# Stress yy = -1000
# Stress xy = 0
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
volumetric_locking_correction = false
[]
[Problem]
coord_type = RZ
[]
[Mesh]#Comment
file = pressure_rz_test.e
[] # Mesh
[Functions]
[./constant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1e3
[../]
[./vary]
type = ParsedFunction
value = 'if(t <= 1, 1000 , 1000+1000*(1-y))'
[../]
[] # Functions
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
use_displaced_mesh = false
[../]
[] # SolidMechanics
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
# [./stress_xy]
# type = MaterialTensorAux
# tensor = stress
# variable = stress_xy
# index = 3
# [../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[] # AuxKernels
[BCs]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./Pressure]
[./Pressure1]
boundary = '3 4'
function = constant
[../]
[./Pressure2]
boundary = '1 2'
function = vary
[../]
[../]
[] # BCs
[Materials]
[./stiffStuff]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.0
thermal_expansion = 1e-5
[../]
[] # Materials
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-12
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_aug.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick1_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 100
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
tangential_tolerance = 1e-3
formulation = augmented_lagrange
system = constraint
normalize_penalty = true
penalty = 1e8
model = frictionless
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/gap_heat_transfer_htonly/gap_heat_transfer_htonly_it_plot_test.i
#
# 1-D Gap Heat Transfer Test without mechanics
#
# This test exercises 1-D gap heat transfer for a constant conductivity gap.
#
# The mesh consists of two element blocks containing one element each. Each
# element is a unit cube. They sit next to one another with a unit between them.
#
# The conductivity of both blocks is set very large to achieve a uniform temperature
# across each block. The temperature of the far left boundary
# is ramped from 100 to 200 over one time unit, and then held fixed for an additional
# time unit. The temperature of the far right boundary is held fixed at 100.
#
# A simple analytical solution is possible for the heat flux between the blocks:
#
# Flux = (T_left - T_right) * (gapK/gap_width)
#
# The gap conductivity is specified as 1, thus
#
# gapK(Tavg) = 1.0*Tavg
#
#
# The heat flux across the gap at time = 2 is then:
#
# Flux(2) = 100 * (1.0/1.0) = 100
#
# For comparison, see results from the flux post processors
#
[Mesh]
file = gap_heat_transfer_htonly_test.e
[]
[Functions]
[./temp]
type = PiecewiseLinear
x = '0 1 2'
y = '100 200 200'
[../]
[]
[ThermalContact]
[./thermal_contact]
type = GapHeatTransfer
variable = temp
master = 3
slave = 2
[../]
[]
[Variables]
[./temp]
order = FIRST
family = LAGRANGE
initial_condition = 100
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[BCs]
[./temp_far_left]
type = FunctionDirichletBC
boundary = 1
variable = temp
function = temp
[../]
[./temp_far_right]
type = DirichletBC
boundary = 4
variable = temp
value = 100
[../]
[]
[Materials]
[./heat1]
type = HeatConductionMaterial
block = '1 2'
specific_heat = 1.0
thermal_conductivity = 100000000.0
[../]
[./density]
type = Density
block = '1 2'
density = 1.0
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = '201 hypre boomeramg 4'
line_search = 'none'
nl_abs_tol = 1e-5
nl_rel_tol = 1e-12
l_tol = 1e-10
l_max_its = 100
start_time = 0.0
dt = 1e-1
end_time = 2.0
[]
[Postprocessors]
[./temp_left]
type = SideAverageValue
boundary = 2
variable = temp
[../]
[./temp_right]
type = SideAverageValue
boundary = 3
variable = temp
[../]
[./flux_left]
type = SideFluxIntegral
variable = temp
boundary = 2
diffusivity = thermal_conductivity
[../]
[./flux_right]
type = SideFluxIntegral
variable = temp
boundary = 3
diffusivity = thermal_conductivity
[../]
[]
[Outputs]
file_base = out_it_plot
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
test/tests/outputs/intervals/no_final_repeat.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 4
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
execute_on = 'final timestep_end'
[../]
[]
modules/richards/test/tests/gravity_head_1/gh_fu_01.i
# unsaturated = false
# gravity = false
# supg = false
# transient = false
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
xmin = -1
xmax = 1
[]
[BCs]
[./left]
type = DirichletBC
boundary = left
value = 1
variable = pressure
[../]
[]
[GlobalParams]
richardsVarNames_UO = PPNames
density_UO = DensityConstBulk
relperm_UO = RelPermPower
SUPG_UO = SUPGnone
sat_UO = Saturation
seff_UO = SeffVG
[]
[UserObjects]
[./PPNames]
type = RichardsVarNames
richards_vars = pressure
[../]
[./DensityConstBulk]
type = RichardsDensityConstBulk
dens0 = 1
bulk_mod = 1.0E3
[../]
[./SeffVG]
type = RichardsSeff1VG
m = 0.8
al = 1
[../]
[./RelPermPower]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./Saturation]
type = RichardsSat
s_res = 0.1
sum_s_res = 0.1
[../]
[./SUPGnone]
type = RichardsSUPGnone
[../]
[]
[Variables]
[./pressure]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = RandomIC
block = 0
min = 0
max = 1
[../]
[../]
[]
[AuxVariables]
[./RFUF_Residual]
[../]
[./RFUF_Jacobian]
[../]
[]
[Kernels]
active = 'richardsf'
[./richardst]
type = RichardsMassChange
variable = pressure
[../]
[./richardsf]
type = RichardsFullyUpwindFlux
richardsVarNames_UO = PPNames
variable = pressure
save_in = RFUF_Residual
diag_save_in = RFUF_Jacobian
[../]
[]
[Materials]
[./rock]
type = RichardsMaterial
block = 0
mat_porosity = 0.1
mat_permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
viscosity = 1E-3
gravity = '0 0 0'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[../]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = gh_fu_01
[./Exodus]
hide = 'RFUF_Residual RFUF_Jacobian'
type = Exodus
[../]
[]
test/tests/materials/output/output_multiple_files.i
[Mesh]
type = FileMesh
file = rectangle.e
dim = 2
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.5
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Materials]
[./block_1]
type = OutputTestMaterial
block = 1
output_properties = 'real_property'
outputs = exodus1
variable = u
[../]
[./block_2]
type = OutputTestMaterial
block = 2
output_properties = 'vector_property'
outputs = exodus2
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 5
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./exodus1]
type = Exodus
hide = u
[../]
[./exodus2]
type = Exodus
hide = u
[../]
[]
test/tests/outputs/oversample/over_sampling_test_gen.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 3
ny = 3
[]
[Functions]
[./exact_fn]
type = ParsedFunction
value = t*((x*x)+(y*y))
[../]
[./forcing_fn]
type = ParsedFunction
value = -4+(x*x+y*y)
[../]
[]
[Variables]
active = 'u'
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
active = 'ie diff ffn'
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
[../]
[]
[Postprocessors]
[./dt]
type = TimestepSize
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.2
start_time = 0
num_steps = 5
[]
[Outputs]
file_base = out_gen
exodus = true
[./oversampling]
file_base = out_gen_oversample
type = Exodus
refinements = 3
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template1_sm.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[Mesh]
file = cyl3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/phase_field/test/tests/KKS_system/kks_example.i
#
# KKS toy problem in the non-split form
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
ny = 5
nz = 0
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = 0
zmax = 0
elem_type = QUAD4
[]
[Variables]
# order parameter
[./eta]
order = THIRD
family = HERMITE
[../]
# hydrogen concentration
[./c]
order = THIRD
family = HERMITE
[../]
# hydrogen phase concentration (matrix)
[./cm]
order = THIRD
family = HERMITE
initial_condition = 0.0
[../]
# hydrogen phase concentration (delta phase)
[./cd]
order = THIRD
family = HERMITE
initial_condition = 0.0
[../]
[]
[ICs]
[./eta]
variable = eta
type = SmoothCircleIC
x1 = 0.0
y1 = 0.0
radius = 0.2
invalue = 0.2
outvalue = 0.1
int_width = 0.05
[../]
[./c]
variable = c
type = SmoothCircleIC
x1 = 0.0
y1 = 0.0
radius = 0.2
invalue = 0.6
outvalue = 0.4
int_width = 0.05
[../]
[]
[BCs]
[./Periodic]
[./all]
variable = 'eta c cm cd'
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
# Free energy of the matrix
[./fm]
type = DerivativeParsedMaterial
f_name = fm
args = 'cm'
function = '(0.1-cm)^2'
outputs = oversampling
[../]
# Free energy of the delta phase
[./fd]
type = DerivativeParsedMaterial
f_name = fd
args = 'cd'
function = '(0.9-cd)^2'
outputs = oversampling
[../]
# h(eta)
[./h_eta]
type = SwitchingFunctionMaterial
h_order = HIGH
eta = eta
outputs = oversampling
[../]
# g(eta)
[./g_eta]
type = BarrierFunctionMaterial
g_order = SIMPLE
eta = eta
outputs = oversampling
[../]
# constant properties
[./constants]
type = GenericConstantMaterial
prop_names = 'L '
prop_values = '0.7 '
[../]
[]
[Kernels]
# enforce c = (1-h(eta))*cm + h(eta)*cd
[./PhaseConc]
type = KKSPhaseConcentration
ca = cm
variable = cd
c = c
eta = eta
[../]
# enforce pointwise equality of chemical potentials
[./ChemPotVacancies]
type = KKSPhaseChemicalPotential
variable = cm
cb = cd
fa_name = fm
fb_name = fd
[../]
#
# Cahn-Hilliard Equation
#
[./CHBulk]
type = KKSCHBulk
variable = c
ca = cm
cb = cd
fa_name = fm
fb_name = fd
mob_name = 0.7
[../]
[./dcdt]
type = TimeDerivative
variable = c
[../]
#
# Allen-Cahn Equation
#
[./ACBulkF]
type = KKSACBulkF
variable = eta
fa_name = fm
fb_name = fd
args = 'cm cd'
w = 0.4
[../]
[./ACBulkC]
type = KKSACBulkC
variable = eta
ca = cm
cb = cd
fa_name = fm
[../]
[./ACInterface]
type = ACInterface
variable = eta
kappa_name = 0.4
[../]
[./detadt]
type = TimeDerivative
variable = eta
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pctype -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu nonzero'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-4
num_steps = 1
dt = 0.01
dtmin = 0.01
[]
[Preconditioning]
[./mydebug]
type = SMP
full = true
[../]
[]
[Outputs]
file_base = kks_example
[./oversampling]
type = Exodus
refinements = 3
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_kinematic_sm.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = glued
penalty = 1e+6
[../]
[]
modules/navier_stokes/test/tests/ins/mms/pspg/pspg_mms_test.i
mu=1.5
rho=2.5
[GlobalParams]
gravity = '0 0 0'
pspg = true
convective_term = true
integrate_p_by_parts = true
laplace = true
u = vel_x
v = vel_y
p = p
alpha = 1e-6
order = FIRST
family = LAGRANGE
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
elem_type = QUAD9
nx = 4
ny = 4
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./vel_x]
[../]
[./vel_y]
[../]
[./p]
[../]
[]
[Kernels]
# mass
[./mass]
type = INSMass
variable = p
x_vel_forcing_func = vel_x_source_func
y_vel_forcing_func = vel_y_source_func
[../]
# x-momentum, space
[./x_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_x
component = 0
forcing_func = vel_x_source_func
[../]
# y-momentum, space
[./y_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_y
component = 1
forcing_func = vel_y_source_func
[../]
[./p_source]
type = BodyForce
function = p_source_func
variable = p
[../]
[]
[BCs]
[./vel_x]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = vel_x_func
variable = vel_x
[../]
[./vel_y]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = vel_y_func
variable = vel_y
[../]
[./p]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = p_func
variable = p
[../]
[]
[Functions]
[./vel_x_source_func]
type = ParsedFunction
value = '-${mu}*(-0.028*pi^2*x^2*sin(0.2*pi*x*y) - 0.028*pi^2*y^2*sin(0.2*pi*x*y) - 0.1*pi^2*sin(0.5*pi*x) - 0.4*pi^2*sin(pi*y)) + ${rho}*(0.14*pi*x*cos(0.2*pi*x*y) + 0.4*pi*cos(pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*y*cos(0.2*pi*x*y) + 0.25*pi*cos(0.5*pi*x)'
[../]
[./vel_y_source_func]
type = ParsedFunction
value = '-${mu}*(-0.018*pi^2*x^2*sin(0.3*pi*x*y) - 0.018*pi^2*y^2*sin(0.3*pi*x*y) - 0.384*pi^2*sin(0.8*pi*x) - 0.027*pi^2*sin(0.3*pi*y)) + ${rho}*(0.06*pi*x*cos(0.3*pi*x*y) + 0.09*pi*cos(0.3*pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.06*pi*y*cos(0.3*pi*x*y) + 0.48*pi*cos(0.8*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*x*cos(0.2*pi*x*y) + 0.3*pi*cos(0.3*pi*y)'
[../]
[./p_source_func]
type = ParsedFunction
value = '-0.06*pi*x*cos(0.3*pi*x*y) - 0.14*pi*y*cos(0.2*pi*x*y) - 0.2*pi*cos(0.5*pi*x) - 0.09*pi*cos(0.3*pi*y)'
[../]
[./vel_x_func]
type = ParsedFunction
value = '0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5'
[../]
[./vel_y_func]
type = ParsedFunction
value = '0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3'
[../]
[./p_func]
type = ParsedFunction
value = '0.5*sin(0.5*pi*x) + 1.0*sin(0.3*pi*y) + 0.5*sin(0.2*pi*x*y) + 0.5'
[../]
[./vxx_func]
type = ParsedFunction
value = '0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x)'
[../]
[./px_func]
type = ParsedFunction
value = '0.1*pi*y*cos(0.2*pi*x*y) + 0.25*pi*cos(0.5*pi*x)'
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 0
prop_names = 'rho mu'
prop_values = '${rho} ${mu}'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
[./exodus]
type = Exodus
[../]
[./csv]
type = CSV
[../]
[]
[Postprocessors]
[./L2vel_x]
type = ElementL2Error
variable = vel_x
function = vel_x_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vel_y]
variable = vel_y
function = vel_y_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2p]
variable = p
function = p_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vxx]
variable = vxx
function = vxx_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2px]
variable = px
function = px_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
[AuxVariables]
[./vxx]
family = MONOMIAL
order = FIRST
[../]
[./px]
family = MONOMIAL
order = FIRST
[../]
[]
[AuxKernels]
[./vxx]
type = VariableGradientComponent
component = x
variable = vxx
gradient_variable = vel_x
[../]
[./px]
type = VariableGradientComponent
component = x
variable = px
gradient_variable = p
[../]
[]
modules/combined/test/tests/solid_mechanics/abaqus_implicit_creep/abaqus_implicit_creep.i
# Creep test using Abaqus CREEP subroutine interface
[Mesh]
# file = cantilever.e
type = GeneratedMesh
dim = 3
xmin = 0.0
xmax = 15.0
ymin = 0.0
ymax = 1.5
zmin = 0.0
zmax = 3.0
nx = 20
ny = 2
nz = 4
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
active = ''
[./stress_mag]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx]
family = MONOMIAL
[../]
[./stress_yy]
family = MONOMIAL
[../]
[./stress_zz]
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
active = ''
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
point1 = '0 0 0'
point2 = '0 1 0'
[../]
[./stress_mag]
type = MaterialTensorAux
variable = stress_mag
index = 1
tensor = stress
point1 = '0 0 0'
point2 = '0 1 0'
quantity = vonmises
[../]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
index = 0
tensor = stress
point1 = '0 0 0'
point2 = '0 1 0'
block = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
index = 2
tensor = stress
point1 = '0 0 0'
point2 = '0 1 0'
[../]
[]
[BCs]
[./bottom_x]
type = DirichletBC
variable = disp_x
boundary = right
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = right
value = 0.0
[../]
[./bottom_z]
type = DirichletBC
variable = disp_z
boundary = right
value = 0.0
[../]
[./Pressure]
[./press]
disp_z = disp_z
disp_y = disp_y
disp_x = disp_x
factor = -5
boundary = left
[../]
[../]
[]
[Materials]
[./solid]
type = Elastic
block = 0
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 209000
poissons_ratio = 0.3
[../]
[./creep]
type = AbaqusCreepMaterial
block = 0
plugin = ../../plugins/creep_usr_creep
poissons_ratio = 0.3
integration_flag = 1
num_state_vars = 2
youngs_modulus = 209000
solve_definition = 5
[../]
[]
[Executioner]
# l_max_its = 60
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew '
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type'
petsc_options_value = '101 hypre boomeramg'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-7
l_tol = 1e-5
start_time = 0.0
dt = 1
num_steps = 1
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring3_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
petsc_options = '-mat_superlu_dist_iterrefine -mat_superlu_dist_replacetinypivot'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane1_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart2.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
order = FIRST
family = LAGRANGE
block = 1
[]
[Mesh]
file = 1hex8_10mm_cube.e
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
x = '0 1e6 2e6 2.001e6 2.002e6'
y = '0 3e8 3e8 12e8 0'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = FINITE
volumetric_locking_correction = true
incremental = true
eigenstrain_names = thermal_expansion
decomposition_method = EigenSolution
add_variables = true
generate_output = 'vonmises_stress'
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 300e6
poissons_ratio = .3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./thermal_expansion]
type = ComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 5e-6
stress_free_temperature = 300.0
temperature = temp
eigenstrain_name = thermal_expansion
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
num_steps = 50000
end_time = 2.002e6
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e7
dt = 1e6
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[]
[Problem]
restart_file_base = adapt_tstep_function_change_restart1_checkpoint_cp/0065
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_mu_0_2_pen_sm.i
[Mesh]
file = plane2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/outputs/intervals/sync_times.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 15
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
verbose = true
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
sync_times = '0.15 0.375 0.892'
sync_only = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_mu_0_2_pen_sm.i
[Mesh]
file = brick4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x59]
type = NodalVariableValue
nodeid = 58
variable = disp_x
[../]
[./disp_x64]
type = NodalVariableValue
nodeid = 63
variable = disp_x
[../]
[./disp_y59]
type = NodalVariableValue
nodeid = 58
variable = disp_y
[../]
[./disp_y64]
type = NodalVariableValue
nodeid = 63
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x59 disp_y59 disp_x64 disp_y64 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+6
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/sm/frictionless_kinematic_sm.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the kinematic method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 4 101'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
formulation = kinematic
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick4_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x59]
type = NodalVariableValue
nodeid = 58
variable = disp_x
[../]
[./disp_x64]
type = NodalVariableValue
nodeid = 63
variable = disp_x
[../]
[./disp_y59]
type = NodalVariableValue
nodeid = 58
variable = disp_y
[../]
[./disp_y64]
type = NodalVariableValue
nodeid = 63
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x59 disp_y59 disp_x64 disp_y64 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/evolving_mass_density/shear_test_tensors.i
# Element mass tests
# This series of tests is designed to compute the mass of elements based on
# an evolving mass density calculation. The tests consist of expansion and compression
# of the elastic patch test model along each axis, uniform expansion and compression,
# and shear in each direction. The expansion and compression tests change the volume of
# the elements. The corresponding change in density should compensate for this so the
# mass remains constant. The shear tests should not result in a volume change, and this
# is checked too. The mass calculation is done with the post processor called Mass.
# The tests/file names are as follows:
# Expansion and compression along a single axis
# expand_compress_x_test_out.e
# expand_compress_y_test_out.e
# expand_compress_z_test_out.e
# Volumetric expansion and compression
# uniform_expand_compress_test.i
# Zero volume change shear along each axis
# shear_x_test_out.e
# shear_y_test_out.e
# shear_z_test_out.e
# The resulting mass calculation for these tests should always be = 1.
# This test is a duplicate of the uniform_expand_compress_test.i test for solid mechanics, and the
# output of this tensor mechanics test is compared to the original
# solid mechanics output. The duplication is necessary to test the
# migrated tensor mechanics version while maintaining tests for solid mechanics.
[Mesh]
file = elastic_patch.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./rampConstant1]
type = PiecewiseLinear
x = '0.00 1.00 2.0 3.00'
y = '0.00 0.25 0.0 -0.25'
scale_factor = 1
[../]
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./TensorMechanics]
[../]
[]
[BCs]
[./bot_x]
type = DirichletBC
variable = disp_x
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_y
value = 0
[../]
[./bot_z]
type = DirichletBC
variable = disp_z
value = 0
[../]
[./top_x]
variable = disp_x
preset = false
[../]
[./top_y]
variable = disp_y
preset = false
[../]
[./top_z]
variable = disp_z
preset = false
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = '1 2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[./small_strain]
type = ComputeSmallStrain
block = ' 1 2 3 4 5 6 7'
[../]
[./elastic_stress]
type = ComputeLinearElasticStress
block = '1 2 3 4 5 6 7'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 3
end_time = 3.0
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
[Postprocessors]
[./Mass]
type = Mass
variable = disp_x
execute_on = 'initial timestep_end'
[../]
[]
test/tests/outputs/exodus/exodus_input.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
execute_input_on = final
execute_on = 'initial timestep_end'
[../]
[]
modules/solid_mechanics/test/tests/temperature_dependent_hardening/temp_dep_hardening.i
#
# This is a test of the piece-wise linear strain hardening model using the
# small strain formulation. This test exercises the temperature-dependent
# hardening curve capability.
#
# Test procedure:
# 1. The element is pulled to and then beyond the yield stress for a given
# temperature.
# 2. The displacement is then constant while the temperature increases and
# the yield stress decreases. This results in a lower stress with more
# plastic strain.
# 3. The temperature decreases beyond its original value giving a higher
# yield stress. The displacement increases, causing increases stress to
# the new yield stress.
# 4. The temperature and yield stress are constant with increasing
# displacement giving a constant stress and more plastic strain.
#
# Plotting total_strain_yy on the x axis and stress_yy on the y axis shows
# the stress history in a clear way.
#
# s |
# t | *****
# r | *
# e | ***** *
# s | * * *
# s | * *
# |*
# +------------------
# total strain
#
# The exact same problem was run in Abaqus with exactly the same result.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
# This test uses ElementalVariableValue postprocessors on specific
# elements, so element numbering needs to stay unchanged
allow_renumbering = false
[]
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./temp]
order = FIRST
family = LAGRANGE
initial_condition = 500.0
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./total_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = PiecewiseLinear
x = '0 1 2 4 5 6'
y = '0 0.025 0.05 0.05 0.06 0.085'
[../]
[./hf1]
type = PiecewiseLinear
x = '0.0 0.01 0.02 0.03 0.1'
y = '5000 5030 5060 5090 5300'
[../]
[./hf2]
type = PiecewiseLinear
x = '0.0 0.01 0.02 0.03 0.1'
y = '4000 4020 4040 4060 4200'
[../]
[./temp_hist]
type = PiecewiseLinear
x = '0 1 2 3 4'
y = '500 500 500 600 400'
[../]
[]
[SolidMechanics]
[./solid]
[../]
[]
[AuxKernels]
[./temp_aux]
type = FunctionAux
variable = temp
function = temp_hist
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./total_strain_yy]
type = MaterialTensorAux
tensor = total_strain
variable = total_strain_yy
index = 1
[../]
[./plastic_strain_xx]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_xx
index = 0
[../]
[./plastic_strain_yy]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_yy
index = 1
[../]
[./plastic_strain_zz]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_zz
index = 2
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 3
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 0
value = 0.0
[../]
[]
[Postprocessors]
[./stress_yy_el]
type = ElementalVariableValue
variable = stress_yy
elementid = 0
[../]
[]
[Materials]
[./elasticity]
type = SolidModel
formulation = Linear
block = 0
youngs_modulus = 2e5
poissons_ratio = .3
constitutive_model = temp_dep_hardening
[../]
[./temp_dep_hardening]
type = IsotropicTempDepHardening
block = 0
hardening_functions = 'hf1 hf2'
temperatures = '300.0 800.0'
relative_tolerance = 1e-25
absolute_tolerance = 1e-5
temp = temp
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = '201 hypre boomeramg 4'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
end_time = 6
dt = 0.1
[]
[Outputs]
csv = true
[./out]
type = Exodus
[../]
[]
modules/contact/test/tests/bouncing-block-contact/bouncing-block-ranfs.i
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
[]
[Mesh]
file = long-bottom-block-no-lower-d.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[ICs]
[./disp_y]
block = 2
variable = disp_y
value = ${fparse starting_point + offset}
type = ConstantIC
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[Constraints]
[./disp_x]
type = RANFSNormalMechanicalContact
slave = 10
master = 20
variable = disp_x
master_variable = disp_x
component = x
[../]
[./disp_y]
type = RANFSNormalMechanicalContact
slave = 10
master = 20
variable = disp_y
master_variable = disp_y
component = y
[../]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[../]
[./leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[../]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = 5
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_hypre_type -mat_mffd_err'
petsc_options_value = 'hypre boomeramg 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[exo]
type = Exodus
[]
checkpoint = true
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick4_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x59]
type = NodalVariableValue
nodeid = 58
variable = disp_x
[../]
[./disp_x64]
type = NodalVariableValue
nodeid = 63
variable = disp_x
[../]
[./disp_y59]
type = NodalVariableValue
nodeid = 58
variable = disp_y
[../]
[./disp_y64]
type = NodalVariableValue
nodeid = 63
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x59 disp_y59 disp_x64 disp_y64 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+6
[../]
[]
modules/tensor_mechanics/test/tests/beam/eigenstrain/eigenstrain_from_var.i
# Test for eigenstrain from variables
# A constant axial eigenstrain of 0.01 is applied to a beam of length
# 4 m. The beam is fixed at one end. The eigenstrain causes a change in
# length of 0.04 m irrespective of the material properties of the beam.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0.0
xmax = 4.0
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[./rot_x]
order = FIRST
family = LAGRANGE
[../]
[./rot_y]
order = FIRST
family = LAGRANGE
[../]
[./rot_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./thermal_eig]
[../]
[./zero1]
[../]
[./zero2]
[../]
[]
[AuxKernels]
[./thermal_eig]
type = ConstantAux
value = 0.01
variable = thermal_eig
[../]
[]
[BCs]
[./fixx1]
type = DirichletBC
variable = disp_x
boundary = left
value = 0.0
[../]
[./fixy1]
type = DirichletBC
variable = disp_y
boundary = left
value = 0.0
[../]
[./fixz1]
type = DirichletBC
variable = disp_z
boundary = left
value = 0.0
[../]
[./fixr1]
type = DirichletBC
variable = rot_x
boundary = left
value = 0.0
[../]
[./fixr2]
type = DirichletBC
variable = rot_y
boundary = left
value = 0.0
[../]
[./fixr3]
type = DirichletBC
variable = rot_z
boundary = left
value = 0.0
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
line_search = 'none'
nl_max_its = 15
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
dt = 1
dtmin = 1
end_time = 2
[]
[Kernels]
[./solid_disp_x]
type = StressDivergenceBeam
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
component = 0
variable = disp_x
[../]
[./solid_disp_y]
type = StressDivergenceBeam
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
component = 1
variable = disp_y
[../]
[./solid_disp_z]
type = StressDivergenceBeam
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
component = 2
variable = disp_z
[../]
[./solid_rot_x]
type = StressDivergenceBeam
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
component = 3
variable = rot_x
[../]
[./solid_rot_y]
type = StressDivergenceBeam
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
component = 4
variable = rot_y
[../]
[./solid_rot_z]
type = StressDivergenceBeam
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
component = 5
variable = rot_z
[../]
[]
[Materials]
[./elasticity]
type = ComputeElasticityBeam
youngs_modulus = 1e6
poissons_ratio = 0.3
shear_coefficient = 1.0
block = 0
[../]
[./strain]
type = ComputeIncrementalBeamStrain
block = '0'
displacements = 'disp_x disp_y disp_z'
rotations = 'rot_x rot_y rot_z'
area = 0.5
Ay = 0.0
Az = 0.0
Iy = 0.01
Iz = 0.01
y_orientation = '0.0 1.0 0.0'
eigenstrain_names = 'thermal'
[../]
[./stress]
type = ComputeBeamResultants
block = 0
[../]
[./thermal]
type = ComputeEigenstrainBeamFromVariable
displacement_eigenstrain_variables = 'thermal_eig zero1 zero2'
eigenstrain_name = thermal
[../]
[]
[Postprocessors]
[./disp_x]
type = PointValue
point = '4.0 0.0 0.0'
variable = disp_x
[../]
[./disp_y]
type = PointValue
point = '4.0 0.0 0.0'
variable = disp_y
[../]
[]
[Outputs]
[./out]
type = Exodus
hide = 'thermal_eig zero1 zero2'
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictional_02_penalty_sm.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.2 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.2
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/tensor_mechanics/test/tests/czm/czm_3DC_3D_base_input.i
[Mesh]
[./msh]
type = GeneratedMeshGenerator
[]
[./subdomain_1]
type = SubdomainBoundingBoxGenerator
input = msh
bottom_left = '0 0 0'
block_id = 1
top_right = '0.5 1 1'
[]
[./subdomain_2]
type = SubdomainBoundingBoxGenerator
input = subdomain_1
bottom_left = '0.5 0 0'
block_id = 2
top_right = '1 1 1'
[]
[./breakmesh]
input = subdomain_2
type = BreakMeshByBlockGenerator
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Modules/TensorMechanics/Master]
[./all]
strain = SMALL
add_variables = true
generate_output = 'stress_xx stress_yy stress_zz stress_yz stress_xz stress_xy'
[../]
[]
[Modules/TensorMechanics/CohesiveZoneMaster]
[./czm1]
boundary = 'interface'
displacements = 'disp_x disp_y disp_z'
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = left
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
preset = false
boundary = left
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = right
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = right
[../]
[./right_z]
type = FunctionDirichletBC
variable = disp_z
preset = false
boundary = right
[../]
[]
[Materials]
[./Elasticity_tensor]
type = ComputeElasticityTensor
block = '1 2'
fill_method = symmetric_isotropic
C_ijkl = '0.3 0.5e8'
[../]
[./stress]
type = ComputeLinearElasticStress
block = '1 2'
[../]
[./czm_3dc]
type = SalehaniIrani3DCTraction
boundary = 'interface'
normal_gap_at_maximum_normal_traction = 1
tangential_gap_at_maximum_shear_traction = 0.5
maximum_normal_traction = 100
maximum_shear_traction = 70
displacements = 'disp_x disp_y disp_z'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
solve_type = NEWTON
nl_abs_tol = 1e-8
nl_rel_tol = 1e-6
nl_max_its = 5
l_tol = 1e-10
l_max_its = 50
start_time = 0.0
dt = 0.2
end_time = 5
dtmin = 0.2
line_search = none
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
[Postprocessors]
[./sxx]
type = SideAverageValue
variable = stress_xx
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'interface'
[../]
[./syy]
type = SideAverageValue
variable = stress_yy
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'interface'
[../]
[./szz]
type = SideAverageValue
variable = stress_zz
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'interface'
[../]
[./syz]
type = SideAverageValue
variable = stress_yz
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'interface'
[../]
[./sxz]
type = SideAverageValue
variable = stress_xz
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'interface'
[../]
[./sxy]
type = SideAverageValue
variable = stress_xy
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'interface'
[../]
[./disp_x]
type = SideAverageValue
variable = disp_x
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'right'
[../]
[./disp_y]
type = SideAverageValue
variable = disp_y
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'right'
[../]
[./disp_z]
type = SideAverageValue
variable = disp_z
execute_on = 'INITIAL TIMESTEP_END'
boundary = 'right'
[../]
[]
test/tests/outputs/misc/warehouse_access.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
console = false
[./exodus2]
type = Exodus
file_base = exodus2
[../]
[./test]
type = OutputObjectTest
[../]
[]
test/tests/mesh/centroid_partitioner/centroid_partitioner_test.i
###########################################################
# This test exercises the parallel computation aspect of
# the framework. A Centroid partitioner is used to split
# the mesh into chunks for several processors along a
# vector (y-axis).
#
# @Requirement F2.30
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 100
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 10.0
# The centroid partitioner orders elements based on
# the position of their centroids
partitioner = centroid
# This will order the elements based on the y value of
# their centroid. Perfect for meshes predominantly in
# one direction
centroid_partitioner_direction = y
# The centroid partitioner behaves differently depending on
# whether you are using Serial or DistributedMesh, so to get
# repeatable results, we restrict this test to using ReplicatedMesh.
parallel_type = replicated
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./proc_id]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff'
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
[./proc_id]
type = ProcessorIDAux
variable = proc_id
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/output_interface/marker.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Adaptivity]
[./Indicators]
[./indicator_0]
type = GradientJumpIndicator
variable = u
outputs = none
[../]
[./indicator_1]
type = GradientJumpIndicator
variable = u
outputs = none
[../]
[../]
[./Markers]
[./marker_0]
type = ValueThresholdMarker
outputs = markers
refine = 0.5
variable = u
[../]
[./marker_1]
type = BoxMarker
bottom_left = '0.25 0.25 0'
top_right = '0.75 0.75 0'
inside = REFINE
outside = DONT_MARK
outputs = markers
[../]
[../]
[]
[Outputs]
[./markers]
type = Exodus
[../]
[./no_markers]
type = Exodus
[../]
[]
test/tests/outputs/oversample/ex02_adapt.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
nz = 0
zmax = 0
elem_type = QUAD9
[]
[Variables]
[./diffused]
order = SECOND
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = diffused
[../]
[]
[DiracKernels]
[./foo]
variable = diffused
type = ConstantPointSource
value = 1
point = '0.3 0.3 0.0'
[../]
[]
[BCs]
[./all]
type = DirichletBC
variable = diffused
boundary = 'bottom left right top'
value = 0.0
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
[]
[Adaptivity]
max_h_level = 2
initial_steps = 2
marker = marker
steps = 2
initial_marker = marker
[./Indicators]
[./indicator]
type = GradientJumpIndicator
variable = diffused
[../]
[../]
[./Markers]
[./marker]
type = ErrorFractionMarker
indicator = indicator
refine = 0.5
[../]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./os2]
type = Exodus
refinements = 2
[../]
[./os4]
type = Exodus
refinements = 4
[../]
[]
test/tests/materials/stateful_prop/stateful_prop_spatial_test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 10
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[AuxVariables]
[./prop1]
order = SECOND
family = MONOMIAL
[../]
[]
[AuxKernels]
[./prop1_output]
type = MaterialRealAux
variable = prop1
property = thermal_conductivity
[../]
[]
[Kernels]
[./heat]
type = MatDiffusionTest
variable = u
prop_name = thermal_conductivity
[../]
[./ie]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0.0
[../]
[./right]
type = MTBC
variable = u
boundary = 1
grad = 1.0
prop_name = thermal_conductivity
[../]
[]
[Materials]
[./stateful]
type = StatefulSpatialTest
block = 0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 5
dt = .1
[]
[Outputs]
file_base = out_spatial
[./out]
type = Exodus
elemental_as_nodal = true
execute_elemental_on = none
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane1_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/frictionless_kinematic.i
# This is a benchmark test that checks constraint based frictionless
# contact using the kinematic method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./left_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_penalty_dirac_sm.i
# This is a dirac (contact formulation) version of glued_penalty.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = glued
formulation = penalty
penalty = 1e+7
system = dirackernel
[../]
[]
modules/combined/examples/phase_field-mechanics/kks_mechanics_KHS.i
# KKS phase-field model coupled with elasticity using Khachaturyan's scheme as
# described in L.K. Aagesen et al., Computational Materials Science, 140, 10-21 (2017)
# Original run #170403a
[Mesh]
type = GeneratedMesh
dim = 3
nx = 640
ny = 1
nz = 1
xmin = -10
xmax = 10
ymin = 0
ymax = 0.03125
zmin = 0
zmax = 0.03125
elem_type = HEX8
[]
[Variables]
# order parameter
[./eta]
order = FIRST
family = LAGRANGE
[../]
# solute concentration
[./c]
order = FIRST
family = LAGRANGE
[../]
# chemical potential
[./w]
order = FIRST
family = LAGRANGE
[../]
# solute phase concentration (matrix)
[./cm]
order = FIRST
family = LAGRANGE
[../]
# solute phase concentration (precipitate)
[./cp]
order = FIRST
family = LAGRANGE
[../]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[ICs]
[./eta_ic]
variable = eta
type = FunctionIC
function = ic_func_eta
block = 0
[../]
[./c_ic]
variable = c
type = FunctionIC
function = ic_func_c
block = 0
[../]
[./w_ic]
variable = w
type = ConstantIC
value = 0.00991
block = 0
[../]
[./cm_ic]
variable = cm
type = ConstantIC
value = 0.131
block = 0
[../]
[./cp_ic]
variable = cp
type = ConstantIC
value = 0.236
block = 0
[../]
[]
[Functions]
[./ic_func_eta]
type = ParsedFunction
value = '0.5*(1.0+tanh((x)/delta_eta/sqrt(2.0)))'
vars = 'delta_eta'
vals = '0.8034'
[../]
[./ic_func_c]
type = ParsedFunction
value = '0.2389*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^3*(6*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^2-15*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))+10)+0.1339*(1-(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^3*(6*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^2-15*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))+10))'
vars = 'delta'
vals = '0.8034'
[../]
[./psi_eq_int]
type = ParsedFunction
value = 'volume*psi_alpha'
vars = 'volume psi_alpha'
vals = 'volume psi_alpha'
[../]
[./gamma]
type = ParsedFunction
value = '(psi_int - psi_eq_int) / dy / dz'
vars = 'psi_int psi_eq_int dy dz'
vals = 'psi_int psi_eq_int 0.03125 0.03125'
[../]
[]
[AuxVariables]
[./sigma11]
order = CONSTANT
family = MONOMIAL
[../]
[./sigma22]
order = CONSTANT
family = MONOMIAL
[../]
[./sigma33]
order = CONSTANT
family = MONOMIAL
[../]
[./e11]
order = CONSTANT
family = MONOMIAL
[../]
[./e12]
order = CONSTANT
family = MONOMIAL
[../]
[./e22]
order = CONSTANT
family = MONOMIAL
[../]
[./e33]
order = CONSTANT
family = MONOMIAL
[../]
[./e_el11]
order = CONSTANT
family = MONOMIAL
[../]
[./e_el12]
order = CONSTANT
family = MONOMIAL
[../]
[./e_el22]
order = CONSTANT
family = MONOMIAL
[../]
[./f_el]
order = CONSTANT
family = MONOMIAL
[../]
[./eigen_strain00]
order = CONSTANT
family = MONOMIAL
[../]
[./Fglobal]
order = CONSTANT
family = MONOMIAL
[../]
[./psi]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./matl_sigma11]
type = RankTwoAux
rank_two_tensor = stress
index_i = 0
index_j = 0
variable = sigma11
[../]
[./matl_sigma22]
type = RankTwoAux
rank_two_tensor = stress
index_i = 1
index_j = 1
variable = sigma22
[../]
[./matl_sigma33]
type = RankTwoAux
rank_two_tensor = stress
index_i = 2
index_j = 2
variable = sigma33
[../]
[./matl_e11]
type = RankTwoAux
rank_two_tensor = total_strain
index_i = 0
index_j = 0
variable = e11
[../]
[./f_el]
type = MaterialRealAux
variable = f_el
property = f_el_mat
execute_on = timestep_end
[../]
[./GlobalFreeEnergy]
variable = Fglobal
type = KKSGlobalFreeEnergy
fa_name = fm
fb_name = fp
w = 0.0264
kappa_names = kappa
interfacial_vars = eta
[../]
[./psi_potential]
variable = psi
type = ParsedAux
args = 'Fglobal w c f_el sigma11 e11'
function = 'Fglobal - w*c + f_el - sigma11*e11'
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = right
value = 0
[../]
[./front_y]
type = DirichletBC
variable = disp_y
boundary = front
value = 0
[../]
[./back_y]
type = DirichletBC
variable = disp_y
boundary = back
value = 0
[../]
[./top_z]
type = DirichletBC
variable = disp_z
boundary = top
value = 0
[../]
[./bottom_z]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0
[../]
[]
[Materials]
# Chemical free energy of the matrix
[./fm]
type = DerivativeParsedMaterial
f_name = fm
args = 'cm'
function = '6.55*(cm-0.13)^2'
[../]
# Chemical Free energy of the precipitate phase
[./fp]
type = DerivativeParsedMaterial
f_name = fp
args = 'cp'
function = '6.55*(cp-0.235)^2'
[../]
# Elastic energy of the precipitate
[./elastic_free_energy_p]
type = ElasticEnergyMaterial
f_name = f_el_mat
args = 'eta'
outputs = exodus
[../]
# h(eta)
[./h_eta]
type = SwitchingFunctionMaterial
h_order = HIGH
eta = eta
[../]
# 1- h(eta), putting in function explicitly
[./one_minus_h_eta_explicit]
type = DerivativeParsedMaterial
f_name = one_minus_h_explicit
args = eta
function = 1-eta^3*(6*eta^2-15*eta+10)
outputs = exodus
[../]
# g(eta)
[./g_eta]
type = BarrierFunctionMaterial
g_order = SIMPLE
eta = eta
[../]
# constant properties
[./constants]
type = GenericConstantMaterial
prop_names = 'M L kappa misfit'
prop_values = '0.7 0.7 0.01704 0.00377'
[../]
#Mechanical properties
[./Stiffness_matrix]
type = ComputeElasticityTensor
base_name = C_matrix
C_ijkl = '103.3 74.25 74.25 103.3 74.25 103.3 46.75 46.75 46.75'
fill_method = symmetric9
[../]
[./Stiffness_ppt]
type = ComputeElasticityTensor
C_ijkl = '100.7 71.45 71.45 100.7 71.45 100.7 50.10 50.10 50.10'
base_name = C_ppt
fill_method = symmetric9
[../]
[./C]
type = CompositeElasticityTensor
args = eta
tensors = 'C_matrix C_ppt'
weights = 'one_minus_h_explicit h'
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[./strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
eigenstrain_names = 'eigenstrain_ppt'
[../]
[./eigen_strain]
type = ComputeVariableEigenstrain
eigen_base = '0.00377 0.00377 0.00377 0 0 0'
prefactor = h
args = eta
eigenstrain_name = 'eigenstrain_ppt'
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
# enforce c = (1-h(eta))*cm + h(eta)*cp
[./PhaseConc]
type = KKSPhaseConcentration
ca = cm
variable = cp
c = c
eta = eta
[../]
# enforce pointwise equality of chemical potentials
[./ChemPotVacancies]
type = KKSPhaseChemicalPotential
variable = cm
cb = cp
fa_name = fm
fb_name = fp
[../]
#
# Cahn-Hilliard Equation
#
[./CHBulk]
type = KKSSplitCHCRes
variable = c
ca = cm
fa_name = fm
w = w
[../]
[./dcdt]
type = CoupledTimeDerivative
variable = w
v = c
[../]
[./ckernel]
type = SplitCHWRes
mob_name = M
variable = w
[../]
#
# Allen-Cahn Equation
#
[./ACBulkF]
type = KKSACBulkF
variable = eta
fa_name = fm
fb_name = fp
w = 0.0264
args = 'cp cm'
[../]
[./ACBulkC]
type = KKSACBulkC
variable = eta
ca = cm
cb = cp
fa_name = fm
[../]
[./ACBulk_el] #This adds df_el/deta for strain interpolation
type = AllenCahn
variable = eta
f_name = f_el_mat
[../]
[./ACInterface]
type = ACInterface
variable = eta
kappa_name = kappa
[../]
[./detadt]
type = TimeDerivative
variable = eta
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm ilu nonzero'
l_max_its = 30
nl_max_its = 10
l_tol = 1.0e-4
nl_rel_tol = 1.0e-8
nl_abs_tol = 1.0e-11
num_steps = 200
[./TimeStepper]
type = SolutionTimeAdaptiveDT
dt = 0.5
[../]
[]
[Postprocessors]
[./f_el_int]
type = ElementIntegralMaterialProperty
mat_prop = f_el_mat
[../]
[./c_alpha]
type = SideAverageValue
boundary = left
variable = c
[../]
[./c_beta]
type = SideAverageValue
boundary = right
variable = c
[../]
[./e11_alpha]
type = SideAverageValue
boundary = left
variable = e11
[../]
[./e11_beta]
type = SideAverageValue
boundary = right
variable = e11
[../]
[./s11_alpha]
type = SideAverageValue
boundary = left
variable = sigma11
[../]
[./s22_alpha]
type = SideAverageValue
boundary = left
variable = sigma22
[../]
[./s33_alpha]
type = SideAverageValue
boundary = left
variable = sigma33
[../]
[./s11_beta]
type = SideAverageValue
boundary = right
variable = sigma11
[../]
[./s22_beta]
type = SideAverageValue
boundary = right
variable = sigma22
[../]
[./s33_beta]
type = SideAverageValue
boundary = right
variable = sigma33
[../]
[./f_el_alpha]
type = SideAverageValue
boundary = left
variable = f_el
[../]
[./f_el_beta]
type = SideAverageValue
boundary = right
variable = f_el
[../]
[./f_c_alpha]
type = SideAverageValue
boundary = left
variable = Fglobal
[../]
[./f_c_beta]
type = SideAverageValue
boundary = right
variable = Fglobal
[../]
[./chem_pot_alpha]
type = SideAverageValue
boundary = left
variable = w
[../]
[./chem_pot_beta]
type = SideAverageValue
boundary = right
variable = w
[../]
[./psi_alpha]
type = SideAverageValue
boundary = left
variable = psi
[../]
[./psi_beta]
type = SideAverageValue
boundary = right
variable = psi
[../]
[./total_energy]
type = ElementIntegralVariablePostprocessor
variable = Fglobal
[../]
# Get simulation cell size from postprocessor
[./volume]
type = ElementIntegralMaterialProperty
mat_prop = 1
[../]
[./psi_eq_int]
type = FunctionValuePostprocessor
function = psi_eq_int
[../]
[./psi_int]
type = ElementIntegralVariablePostprocessor
variable = psi
[../]
[./gamma]
type = FunctionValuePostprocessor
function = gamma
[../]
[./int_position]
type = FindValueOnLine
start_point = '-10 0 0'
end_point = '10 0 0'
v = eta
target = 0.5
[../]
[]
#
# Precondition using handcoded off-diagonal terms
#
[Preconditioning]
[./full]
type = SMP
full = true
[../]
[]
[Outputs]
[./exodus]
type = Exodus
interval = 20
[../]
checkpoint = true
[./csv]
type = CSV
execute_on = 'final'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template2_sm.i
[Mesh]
file = plane2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
python/peacock/tests/common/oversample.i
###########################################################
# This is a simple test with a time-dependent problem
# demonstrating the use of a "Transient" Executioner.
#
# @Requirement F1.10
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD4
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = ConstantIC
value = 0
[../]
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
# dudt = 3*t^2*(x^2 + y^2)
value = 3*t*t*((x*x)+(y*y))-(4*t*t*t)
[../]
[./exact_fn]
type = ParsedFunction
value = t*t*t*((x*x)+(y*y))
[../]
[]
[Kernels]
active = 'diff ie ffn'
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
active = 'all'
[./all]
type = FunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
[../]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Postprocessors]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[./dt]
type = TimestepSize
[../]
[]
[Executioner]
type = Transient
scheme = 'implicit-euler'
# Preconditioned JFNK (default)
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 5
dt = 0.1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = out_transient
exodus = true
[./refine_2]
type = Exodus
file_base = oversample_2
refinements = 2
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template1_sm.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[Mesh]
file = cyl2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/outputs/iterative/iterative_steady_sequence.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
preset = false
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
preset = false
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
execute_on = 'initial timestep_end failed nonlinear linear'
sequence = true
[../]
[]
test/tests/outputs/displacement/displacement_transient_test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 5
ny = 5
elem_type = QUAD4
displacements = 'u v'
[]
[Functions]
[./right_u]
type = ParsedFunction
value = 0.1*t
[../]
[./fn_v]
type = ParsedFunction
value = (x+1)*y*0.1*t
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./td_u]
type = TimeDerivative
variable = u
[../]
[./diff_u]
type = Diffusion
variable = u
[../]
[./td_v]
type = TimeDerivative
variable = v
[../]
[./diff_v]
type = Diffusion
variable = v
[../]
[]
[BCs]
[./left_u]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right_u]
type = FunctionDirichletBC
variable = u
boundary = 1
function = right_u
[../]
[./left_v]
type = FunctionDirichletBC
variable = v
boundary = '0 2'
function = fn_v
[../]
[]
[Executioner]
type = Transient
dt = 0.1
start_time = 0
num_steps = 10
solve_type = 'PJFNK'
[]
[Outputs]
[./out_displaced]
type = Exodus
use_displaced = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring4_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/solid_mechanics/test/tests/reaction_prescribed_disp/reaction.i
[Mesh]
file = 2d_square.e
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./resid_x]
[../]
[./resid_y]
[../]
[./diag_stiff_x]
[../]
[./diag_stiff_y]
[../]
[]
[Functions]
[./horizontal_movement]
type = ParsedFunction
value = t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_x = resid_x
save_in_disp_y = resid_y
diag_save_in_disp_x = diag_stiff_x
diag_save_in_disp_y = diag_stiff_y
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./1]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.0
youngs_modulus = 1e9
[../]
[]
[Postprocessors]
[./react_x]
type = NodalSum
variable = resid_x
boundary = 4
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_rel_tol = 1e-12
l_max_its = 100
nl_max_its = 10
dt = 0.01
end_time = 0.1
[]
[Outputs]
file_base = reaction_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_kinematic_dirac.i
# This is a dirac (contact formulation) version of frictionless_kinematic.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.1
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = frictionless
penalty = 1e+6
system = diracKernel
[../]
[]
modules/richards/test/tests/uo_egs/seff2.i
# Outputs a 2phase effective saturation relationship into an exodus file
# and into a CSV file.
# In the exodus file, the Seff will be a function of "x", and
# this "x" is actually the difference in porepressures,
# say P_gas - P_water (so "x" should be positive).
# In the CSV file you will find the Seff at the "x" point
# specified by you below.
#
# You may specify:
# - the "type" of Seff in the UserObjects block
# - the parameters of this Seff function in the UserObjects block
# - the "x" point (which is del_porepressure) that you want to extract
# the Seff at, if you want a value at a particular point
# - the range of "x" values (which is porepressure values) may be
# changed in the Mesh block, below
[UserObjects]
[./seff]
type = RichardsSeff2waterVG
al = 1E-6
m = 0.8
[../]
[]
[Postprocessors]
[./point_val]
type = PointValue
execute_on = timestep_begin
# note this point must lie inside the mesh below
point = '1 0 0'
variable = seff
[../]
[]
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
# the following specify the range of porepressure
xmin = 0
xmax = 3E6
[]
############################
# You should not need to change any of the stuff below
############################
[Variables]
[./u]
[../]
[./v]
[../]
[]
[ICs]
[./u_init]
type = FunctionIC
variable = u
function = x
[../]
[./v_init]
type = ConstantIC
variable = v
value = 0
[../]
[]
[AuxVariables]
[./seff]
[../]
[]
[AuxKernels]
[./seff_AuxK]
type = RichardsSeffAux
variable = seff
seff_UO = seff
execute_on = timestep_begin
pressure_vars = 'v u'
[../]
[]
[Kernels]
[./dummy_u]
type = Diffusion
variable = u
[../]
[./dummy_v]
type = Diffusion
variable = v
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 0
[]
[Outputs]
file_base = seff2
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = 'u v'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_mu_0_2_pen_sm.i
[Mesh]
file = cyl3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_kinematic_sm.i
# This is a benchmark test that checks constraint based frictionless
# contact using the kinematic method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/simple_contact/sm/merged_sm.i
[GlobalParams]
volumetric_locking_correction = false
[]
[Mesh]
file = merged.e
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[DiracKernels]
[./master_x]
type = ContactMaster
variable = disp_x
component = 0
boundary = 3
slave = 2
[../]
[./master_y]
type = ContactMaster
variable = disp_y
component = 1
boundary = 3
slave = 2
[../]
[./master_z]
type = ContactMaster
variable = disp_z
component = 2
boundary = 3
slave = 2
[../]
[./slave_x]
type = SlaveConstraint
variable = disp_x
component = 0
boundary = 2
master = 3
[../]
[./slave_y]
type = SlaveConstraint
variable = disp_y
component = 1
boundary = 2
master = 3
[../]
[./slave_z]
type = SlaveConstraint
variable = disp_z
component = 2
boundary = 2
master = 3
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff2]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 20
dt = 1.0
num_steps = 1
[]
[Outputs]
file_base = merged_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/gravity/gravity_rz_quad8.i
# Gravity Test
#
# This test is designed to exercise the gravity body force rz kernel.
#
# The mesh for this problem is a rectangle 10 units by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero at the top. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(y) = -b*y^2/(2*E)+b*L*y/E
#
# The displacement at y=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(y) = b*(L-y)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at y=0. The stress
# is reported at element centers. The element closest to y=0 sits
# at y = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at y = L where the stress is zero analytically. The nearest
# element is at y=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y'
order = SECOND
family = LAGRANGE
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = gravity_rz_quad8_test.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[Modules/TensorMechanics/Master/All]
strain = FINITE
add_variables = true
generate_output = 'stress_xx stress_yy stress_xy'
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_y
value = 20
[../]
[]
[BCs]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 0.5e6
lambda = 0.0
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./density]
type = Density
density = 2
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[./Quadrature]
order = THIRD
[../]
[]
[Outputs]
file_base = gravity_rz_quad8_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/ics/component_ic/component_ic.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = SECOND
family = SCALAR
[../]
[]
[AuxVariables]
[./a]
order = SECOND
family = SCALAR
[../]
[]
[ICs]
[./v_ic]
type = ScalarComponentIC
variable = 'v'
values = '1 2'
[../]
[./a_ic]
type = ScalarComponentIC
variable = 'a'
values = '4 5'
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[ScalarKernels]
[./ask]
type = AlphaCED
variable = v
value = 100
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Postprocessors]
[./v1]
type = ScalarVariable
variable = v
component = 0
execute_on = 'initial timestep_end'
[../]
[./v2]
type = ScalarVariable
variable = v
component = 1
execute_on = 'initial timestep_end'
[../]
[./a1]
type = ScalarVariable
variable = a
component = 0
execute_on = 'initial timestep_end'
[../]
[./a2]
type = ScalarVariable
variable = a
component = 1
execute_on = 'initial timestep_end'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
[./out]
type = Exodus
execute_scalars_on = none
[../]
[]
modules/tensor_mechanics/test/tests/weak_plane_tensile/large_deform1.i
# rotate the mesh by 90degrees
# then pull in the z direction - should be no plasticity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[]
[BCs]
# rotate:
# ynew = c*y + s*z. znew = -s*y + c*z
[./bottomx]
type = FunctionDirichletBC
variable = disp_x
boundary = back
function = '0'
[../]
[./bottomy]
type = FunctionDirichletBC
variable = disp_y
boundary = back
function = '0*y+1*z-y'
[../]
[./bottomz]
type = FunctionDirichletBC
variable = disp_z
boundary = back
function = '-1*y+0*z-z+if(t>0,0.5-y,0)' # note that this uses original nodal values of (x,y,z)
[../]
[./topx]
type = FunctionDirichletBC
variable = disp_x
boundary = front
function = '0'
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
boundary = front
function = '0*y+1*z-y'
[../]
[./topz]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '-1*y+0*z-z+if(t>0,0.5-y,0)' # note that this uses original nodal values of (x,y,z)
[../]
[]
[AuxVariables]
[./stress_xz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./yield_fcn]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[../]
[./stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
[../]
[./stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[../]
[./yield_fcn_auxk]
type = MaterialStdVectorAux
property = plastic_yield_function
index = 0
variable = yield_fcn
[../]
[]
[Postprocessors]
[./s_xz]
type = PointValue
point = '0 0 0'
variable = stress_xz
[../]
[./s_yz]
type = PointValue
point = '0 0 0'
variable = stress_yz
[../]
[./s_zz]
type = PointValue
point = '0 0 0'
variable = stress_zz
[../]
[./f]
type = PointValue
point = '0 0 0'
variable = yield_fcn
[../]
[]
[UserObjects]
[./str]
type = TensorMechanicsHardeningConstant
value = 1
[../]
[./wpt]
type = TensorMechanicsPlasticWeakPlaneTensile
tensile_strength = str
yield_function_tolerance = 1E-6
internal_constraint_tolerance = 1E-5
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeElasticityTensor
block = 0
fill_method = symmetric_isotropic
C_ijkl = '0 1E6'
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y disp_z'
[../]
[./mc]
type = ComputeMultiPlasticityStress
block = 0
plastic_models = wpt
transverse_direction = '0 0 1'
ep_plastic_tolerance = 1E-5
[../]
[]
[Executioner]
start_time = -1
end_time = 1
dt = 1
type = Transient
[]
[Outputs]
file_base = large_deform1
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_lm.i
[Mesh]
patch_size = 80
[file]
type = FileMeshGenerator
file = sliding_elastic_blocks_2d.e
[]
[slave]
input = file
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = '30'
[]
[master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '20'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
block = '1 2'
[../]
[]
[Variables]
[normal_lm]
block = '30'
[]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 15
dt = 0.1
dtmin = 0.01
l_max_its = 30
nl_max_its = 20
line_search = 'none'
timestep_tolerance = 1e-6
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
sync_times = '1 2 3 4 5 6 7 8 9 10 11 12 13 14 15'
[out]
type = Exodus
sync_only = true
[]
[dof]
execute_on = 'initial'
type = DOFMap
[]
[csv]
type = CSV
execute_on = 'nonlinear timestep_end'
[]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = 3
master = 2
variable = normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
[../]
[normal_x]
type = NormalMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[normal_y]
type = NormalMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[lin]
type = NumLinearIterations
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '30'
execute_on = 'nonlinear timestep_end'
[]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring2_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_aug_sm.i
[Mesh]
file = brick1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 100
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
tangential_tolerance = 1e-3
formulation = augmented_lagrange
system = constraint
normalize_penalty = true
penalty = 1e8
model = frictionless
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/outputs/exodus/exodus_nodal.i
##
# \file exodus/exodus_nodal.i
# \example exodus/exodus_nodal.i
# Input file for testing nodal data output
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[AuxVariables]
[./aux0]
order = SECOND
family = SCALAR
[../]
[./aux1]
family = SCALAR
initial_condition = 5
[../]
[./aux2]
family = SCALAR
initial_condition = 10
[../]
[./aux3]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./diff_v]
type = CoefDiffusion
variable = v
coef = 2
[../]
[]
[BCs]
[./right_u]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_u]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = right
value = 3
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = left
value = 2
[../]
[]
[Postprocessors]
[./num_vars]
type = NumVars
system = 'NL'
[../]
[./num_aux]
type = NumVars
system = 'AUX'
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
hide = 'u v aux0 aux1'
scalar_as_nodal = true
elemental_as_nodal = true
execute_elemental_on = none
execute_scalars_on = none
execute_postprocessors_on = none
[../]
[]
[ICs]
[./aux0_IC]
variable = aux0
values = '12 13'
type = ScalarComponentIC
[../]
[]
modules/combined/test/tests/fieldsplit_contact/2blocks3d.i
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[Mesh]
file = 2blocks3d.e
patch_size = 5
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Modules/TensorMechanics/Master]
[./all]
strain = FINITE
incremental = true
add_variables = true
[../]
[]
[AuxVariables]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[]
[Functions]
[./horizontal_movement]
type = ParsedFunction
value = t/10.0
[../]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
order = FIRST
[../]
[]
[BCs]
[./push_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 1
function = horizontal_movement
[../]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = '1 4'
value = 0.0
[../]
[./fix_z]
type = DirichletBC
variable = disp_z
boundary = '1 4'
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[../]
[./stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[../]
[./elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[../]
[./stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[../]
[]
[Contact]
[./leftright]
slave = 2
master = 3
model = frictionless
penalty = 1e+6
normalize_penalty = true
formulation = kinematic
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
[Preconditioning]
[./FSP]
type = FSP
# It is the starting point of splitting
topsplit = 'contact_interior' # 'contact_interior' should match the following block name
[./contact_interior]
splitting = 'contact interior'
splitting_type = multiplicative
[../]
[./interior]
type = ContactSplit
vars = 'disp_x disp_y disp_z'
uncontact_master = '3'
uncontact_slave = '2'
uncontact_displaced = '1'
blocks = '1 2'
include_all_contact_nodes = 1
petsc_options_iname = '-ksp_type -ksp_max_it -ksp_rtol -ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter -pc_hypre_strong_threshold'
petsc_options_value = ' preonly 10 1e-4 201 hypre boomeramg 1 0.25'
[../]
[./contact]
type = ContactSplit
vars = 'disp_x disp_y disp_z'
contact_master = '3'
contact_slave = '2'
contact_displaced = '1'
include_all_contact_nodes = 1
petsc_options_iname = '-ksp_type -ksp_max_it -pc_type -pc_asm_overlap -sub_pc_type -pc_factor_levels'
petsc_options_value = ' preonly 10 asm 1 lu 0'
[../]
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.1
dtmin = 0.1
end_time = 0.1
l_tol = 1e-4
l_max_its = 100
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
nl_max_its = 100
[]
[Outputs]
file_base = 2blocks3d_out
[./exodus]
type = Exodus
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_patch_rz_smp_sm.i
#
# This problem is modified from the Abaqus verification manual:
# "1.5.4 Patch test for axisymmetric elements"
# The original stress solution is given as:
# xx = yy = zz = 2000
# xy = 400
#
# Here, E=1e6 and nu=0.25.
# However, with a +100 degree change in temperature and a coefficient
# of thermal expansion of 1e-6, the solution becomes:
# xx = yy = zz = 1800
# xy = 400
# since
# E*(1-nu)/(1+nu)/(1-2*nu)*(1+2*nu/(1-nu))*(1e-3-1e-4) = 1800
#
# Also,
#
# dSrr dSrz Srr-Stt
# ---- + ---- + ------- + br = 0
# dr dz r
#
# and
#
# dSrz Srz dSzz
# ---- + --- + ---- + bz = 0
# dr r dz
#
# where
# Srr = stress in rr
# Szz = stress in zz
# Stt = stress in theta-theta
# Srz = stress in rz
# br = body force in r direction
# bz = body force in z direction
#
# This test is meant to exercise the Jacobian. To that end, the body
# force has been turned off. This makes the results differ slightly
# from the original values, but requires a correct Jacobian for minimal
# iterations. Iteration plotting is turned on to ensure that the
# number of iterations needed does not increase.
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_thermal_patch_rz_test.e
[]
[Functions]
[./ur]
type = ParsedFunction
value = '1e-3*x'
[../]
[./uz]
type = ParsedFunction
value = '1e-3*(x+y)'
[../]
[./body]
type = ParsedFunction
value = '-400/x'
[../]
[./temp]
type = ParsedFunction
value = '117.56+100*t'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./temp]
initial_condition = 117.56
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
execute_on = timestep_end
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
execute_on = timestep_end
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
execute_on = timestep_end
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
execute_on = timestep_end
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 10
function = ur
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 10
function = uz
[../]
[./temp]
type = FunctionDirichletBC
variable = temp
boundary = 10
function = temp
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
bulk_modulus = 666666.6666666667
poissons_ratio = 0.25
temp = temp
thermal_expansion = 1e-6
[../]
[./heat]
type = HeatConductionMaterial
block = 1
specific_heat = 0.116
thermal_conductivity = 4.85e-4
[../]
[./density]
type = Density
block = 1
density = 0.283
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
nl_abs_tol = 1e-11
nl_rel_tol = 1e-12
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 1
end_time = 1.0
[]
[Outputs]
file_base = elastic_thermal_patch_rz_smp_out
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
modules/heat_conduction/test/tests/meshed_gap_thermal_contact/meshed_gap_thermal_contact.i
[Mesh]
[fmesh]
type = FileMeshGenerator
file = meshed_gap.e
[]
[block0]
type = SubdomainBoundingBoxGenerator
input = fmesh
bottom_left = '.5 -.5 0'
top_right = '.7 .5 0'
block_id = 4
[]
[]
[Variables]
[./temp]
block = '1 3'
initial_condition = 1.0
[../]
[]
[Kernels]
[./hc]
type = HeatConduction
variable = temp
block = '1 3'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = temp
boundary = 1
value = 1
[../]
[./right]
type = DirichletBC
variable = temp
boundary = 4
value = 2
[../]
[]
[ThermalContact]
[./gap_conductivity]
type = GapHeatTransfer
variable = temp
master = 2
slave = 3
gap_conductivity = 0.5
[../]
[]
[Materials]
[./hcm]
type = HeatConductionMaterial
block = '1 3'
temp = temp
thermal_conductivity = 1
[../]
[]
[Problem]
type = FEProblem
kernel_coverage_check = false
material_coverage_check = false
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template2.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick1_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 5e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/hertz_contact/hertz_contact_rz.i
# Hertz Contact: Sphere on sphere
# Spheres have the same radius, Young's modulus, and Poisson's ratio.
# Define E:
# 1/E = (1-nu1^2)/E1 + (1-nu2^2)/E2
#
# Effective radius R:
# 1/R = 1/R1 + 1/R2
#
# F is the applied compressive load.
#
# Area of contact a::
# a^3 = 3FR/4E
#
# Depth of indentation d:
# d = a^2/R
#
#
# Let R1 = R2 = 2. Then R = 1.
#
# Let nu1 = nu2 = 0.25, E1 = E2 = 1.40625e7. Then E = 7.5e6.
#
# Let F = 10000. Then a = 0.1, d = 0.01.
#
## Note: There is not a good way to check the result. The standard approach is
## to map contact pressure as a function of radius, but we don't have the
## contact pressure available. See the description on Wikipedia for details of
## analytic equations, and the Abaqus Benchmarks Manual, 1.1.11, for a plot of
## contact pressure vs. radius.
[Problem]
coord_type = RZ
[]
[Mesh]#Comment
file = hertz_contact_rz.e
displacements = 'disp_x disp_y'
[] # Mesh
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 795.77471545947674 # 10000/pi/2^2
[../]
[./disp_y]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. -0.01 -0.01'
[../]
[] # Functions
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./hydrostatic]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises
quantity = vonmises
[../]
[./hydrostatic]
type = MaterialTensorAux
tensor = stress
variable = hydrostatic
quantity = hydrostatic
[../]
[] # AuxKernels
[BCs]
[./base_y]
type = DirichletBC
variable = disp_y
boundary = 1000
value = 0.0
[../]
[./symm_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./disp_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 2
function = disp_y
[../]
[] # BCs
[Contact]
[./dummy_name]
master = 1000
slave = 100
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1.40625e7
poissons_ratio = 0.25
[../]
[./stiffStuff2] # Rigid block
type = Elastic
block = 1000
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[] # Materials
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 200
start_time = 0.0
dt = 0.5
end_time = 2.0
[] # Executioner
[Postprocessors]
[./maxdisp]
type = NodalVariableValue
nodeid = 39 # 40-1 where 40 is the exodus node number of the top-left node
variable = disp_y
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictional_04_penalty_sm.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0.4 is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-3
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
# csv = true
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.4
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/contact_verification/overclosure_removal/overclosure.i
# ---------------------------------------------------------------------------------------------------------
# REGRESSION TEST FOR OVERCLOSURE REMOVAL
# =======================================
# THIS TEST DEMONSTRATES THAT THE CODE IS CAPABLE OF REMOVING A SIZEABLE OVERCLOSURE IN A SINGLE TIME-STEP
# --------------------------------------------------------------------------------------------------------
[Mesh]
file = oc_mesh.e
[]
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
use_finite_deform_jacobian = true
[../]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./_dt]
type = TimestepSize
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side1_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_y]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[./top_x]
type = DirichletBC
variable = disp_x
boundary = 1001 #nodeset 1001 top central node
value = 0.0
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
decomposition_method = EigenSolution
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
decomposition_method = EigenSolution
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
dtmin = 1.0
l_tol = 1e-3
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 4
disp_y = disp_y
disp_x = disp_x
master = 3
system = constraint
model = frictionless
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/frictional_04_penalty.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.4 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[] # Materials
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 200
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.4
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring4_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/gravity/gravity_qp_select_sm.i
# This test uses small strain formulation, and the use_displaced_mesh
# is set to false for the kernels
#
# Gravity Test
#
# This test is similar to the other gravity tests, but it also tests the
# capability in MaterialTensorAux to return the stress of a single,
# specified integration point, rather than the element average.
# To get the stress at a single integration point, set the parameter
# qp_select to the integration point number (i.e. 0-9 for a quad 8)
# in the AuxKernel
#
# The mesh for this problem is a unit square.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero on each of side that faces a negative
# coordinate direction. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(x) = -b*x^2/(2*E)+b*L*x/E
#
# The displacement at x=L is b*L^2/(2*E) = 2*20*1*1/(2*1e6) = 0.00002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(x) = b*(L-x)
#
# The stress at x=0 is b*L = 2*20*1 = 40.
#
# Note: The isoparametric coordinate for a quad8 (fourth order) element
# is: +/- 0.77459667 and 0. For a 1 unit square with the edge of
# the element in the x = 0 plane, there would be an integration point
# at x_coordinate 0.5 - 0.5*0.77459667 (0.11270167), 0.5, and
# 0.50 + 0.5*0.77459667 (0.88729834).
#
# The corresponding stresses are:
#
# S(0.11270167) = 40(1-0.11270167) = 35.491933
# S(0.5) = 40(1-0.5) = 20
# S(0.88729834) = 40(1-0.88729834) = 4.5080664
#
# These stresses are a precise match to the simulation result.
#
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Mesh]
file = gravity_2D.e
[]
[Variables]
[./disp_x]
order = SECOND
family = LAGRANGE
[../]
[./disp_y]
order = SECOND
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_0]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_1]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_2]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_3]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_4]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_5]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_6]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_7]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_8]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_x
value = 20
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_xx_qp_0]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_0
index = 0
qp_select = 0
[../]
[./stress_xx_qp_1]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_1
index = 0
qp_select = 1
[../]
[./stress_xx_qp_2]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_2
index = 0
qp_select = 2
[../]
[./stress_xx_qp_3]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_3
index = 0
qp_select = 3
[../]
[./stress_xx_qp_4]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_4
index = 0
qp_select = 4
[../]
[./stress_xx_qp_5]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_5
index = 0
qp_select = 5
[../]
[./stress_xx_qp_6]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_6
index = 0
qp_select = 6
[../]
[./stress_xx_qp_7]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_7
index = 0
qp_select = 7
[../]
[./stress_xx_qp_8]
type = MaterialTensorAux
tensor = stress
variable = stress_xx_qp_8
index = 0
qp_select = 8
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
youngs_modulus = 1e6
bulk_modulus = 0.333333333333333e6
formulation = NonlinearPlaneStrain
[../]
[./density]
type = Density
block = 1
density = 2
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = gravity_qp_select_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
tutorials/darcy_thermo_mech/step09_mechanics/problems/step9.i
[GlobalParams]
displacements = 'disp_r disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 2
ny = 200
nx = 10
ymax = 0.304 # Length of test chamber
xmax = 0.0257 # Test chamber radius
[]
[MeshModifiers]
[bottom]
type = SubdomainBoundingBox
location = inside
bottom_left = '0 0 0'
top_right = '0.01285 0.304 0'
block_id = 1
[]
[]
[Variables]
[pressure]
[]
[temperature]
initial_condition = 300 # Start at room temperature
[]
[]
[AuxVariables]
[velocity]
order = CONSTANT
family = MONOMIAL_VEC
[]
[]
[Modules/TensorMechanics/Master]
[all]
# This block adds all of the proper Kernels, strain calculators, and Variables
# for TensorMechanics in the correct coordinate system (autodetected)
add_variables = true
strain = FINITE
eigenstrain_names = eigenstrain
use_automatic_differentiation = true
generate_output = 'vonmises_stress elastic_strain_xx elastic_strain_yy strain_xx strain_yy'
[]
[]
[Kernels]
[darcy_pressure]
type = DarcyPressure
variable = pressure
[]
[heat_conduction]
type = ADHeatConduction
variable = temperature
[]
[heat_conduction_time_derivative]
type = ADHeatConductionTimeDerivative
variable = temperature
[]
[heat_convection]
type = DarcyAdvection
variable = temperature
pressure = pressure
[]
[]
[AuxKernels]
[velocity]
type = DarcyVelocity
variable = velocity
execute_on = timestep_end
pressure = pressure
[]
[]
[BCs]
[inlet]
type = DirichletBC
variable = pressure
boundary = bottom
value = 4000 # (Pa) From Figure 2 from paper. First data point for 1mm spheres.
[]
[outlet]
type = DirichletBC
variable = pressure
boundary = top
value = 0 # (Pa) Gives the correct pressure drop from Figure 2 for 1mm spheres
[]
[inlet_temperature]
type = FunctionDirichletBC
variable = temperature
boundary = bottom
function = 'if(t<0,350+50*t,350)'
[]
[outlet_temperature]
type = HeatConductionOutflow
variable = temperature
boundary = top
[]
[hold_inlet]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0
[]
[hold_center]
type = DirichletBC
variable = disp_r
boundary = left
value = 0
[]
[hold_outside]
type = DirichletBC
variable = disp_r
boundary = right
value = 0
[]
[]
[Materials]
viscosity_file = data/water_viscosity.csv
density_file = data/water_density.csv
thermal_conductivity_file = data/water_thermal_conductivity.csv
specific_heat_file = data/water_specific_heat.csv
thermal_expansion_file = data/water_thermal_expansion.csv
[column_top]
type = PackedColumn
block = 0
temperature = temperature
radius = 1.15
fluid_viscosity_file = ${viscosity_file}
fluid_density_file = ${density_file}
fluid_thermal_conductivity_file = ${thermal_conductivity_file}
fluid_specific_heat_file = ${specific_heat_file}
fluid_thermal_expansion_file = ${thermal_expansion_file}
[]
[column_bottom]
type = PackedColumn
block = 1
temperature = temperature
radius = 1
fluid_viscosity_file = ${viscosity_file}
fluid_density_file = ${density_file}
fluid_thermal_conductivity_file = ${thermal_conductivity_file}
fluid_specific_heat_file = ${specific_heat_file}
fluid_thermal_expansion_file = ${thermal_expansion_file}
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 200e9 # (Pa) from wikipedia
poissons_ratio = .3 # from wikipedia
[]
[elastic_stress]
type = ADComputeFiniteStrainElasticStress
[]
[thermal_strain]
type = ADComputeThermalExpansionEigenstrain
stress_free_temperature = 300
eigenstrain_name = eigenstrain
temperature = temperature
thermal_expansion_coeff = 1e-5 # TM modules doesn't support material property, but it will
[]
[]
[Postprocessors]
[average_temperature]
type = ElementAverageValue
variable = temperature
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Executioner]
type = Transient
start_time = -1
end_time = 200
steady_state_tolerance = 1e-7
steady_state_detection = true
dt = 0.25
solve_type = PJFNK
automatic_scaling = true
compute_scaling_once = false
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
#petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
#petsc_options_value = 'hypre boomeramg 500'
line_search = none
[TimeStepper]
type = FunctionDT
function = 'if(t<0,0.1,0.25)'
[]
[]
[Outputs]
[out]
type = Exodus
elemental_as_nodal = true
[]
[]
test/tests/auxkernels/linear_combination/test.i
# All tested logic is in the aux system
# The non-linear problem is unrelated
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 10
[]
[Functions]
[./v1_func]
type = ParsedFunction
value = (1-x)/2
[../]
[./v2_func]
type = ParsedFunction
value = (1+x)/2
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./lc]
[../]
[./v1]
[../]
[./v2]
[../]
[./w1]
[../]
[./w2]
[../]
[]
[ICs]
[./v1_ic]
type = FunctionIC
variable = v1
function = v1_func
[../]
[./v2_ic]
type = FunctionIC
variable = v2
function = v2_func
[../]
[./w1_ic]
type = ConstantIC
variable = w1
value = 0.3
[../]
[./w2_ic]
type = ConstantIC
variable = w2
value = 0.5
[../]
[]
[AuxKernels]
[./lc-aux]
type = ParsedAux
variable = lc
function = 'v1*w1+v2*w2'
args = 'v1 w1 v2 w2'
execute_on = 'timestep_end'
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 1
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 2
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
modules/combined/test/tests/simple_contact/sm/simple_contact_test_sm.i
# Note: Run merged.i to generate a solution to compare to that doesn't use contact.
[Mesh]
file = contact.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
formulation = kinematic
system = constraint
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
formulation = Nonlinear3D
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff2]
type = Elastic
formulation = Nonlinear3D
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/tensor_mechanics/test/tests/ad_pressure/pressure_test.i
#
# Pressure Test
#
# This test is designed to compute pressure loads on three faces of a unit cube.
#
# The mesh is composed of one block with a single element. Symmetry bcs are
# applied to the faces opposite the pressures. Poisson's ratio is zero,
# which makes it trivial to check displacements.
#
[Mesh]
type = FileMesh
file = pressure_test.e
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./rampConstant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1.0
[../]
[./zeroRamp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0. 1.'
scale_factor = 1.0
[../]
[./rampUnramp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 0.'
scale_factor = 10.0
[../]
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
use_automatic_differentiation = true
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./Pressure]
[./Side1]
boundary = 1
function = rampConstant
displacements = 'disp_x disp_y disp_z'
use_automatic_differentiation = true
[../]
[./Side2]
boundary = 2
function = zeroRamp
displacements = 'disp_x disp_y disp_z'
use_automatic_differentiation = true
factor = 2.0
[../]
[./Side3]
boundary = 3
function = rampUnramp
displacements = 'disp_x disp_y disp_z'
use_automatic_differentiation = true
[../]
[../]
[]
[Materials]
[./Elasticity_tensor]
type = ComputeElasticityTensor
block = 1
fill_method = symmetric_isotropic
C_ijkl = '0 0.5e6'
[../]
[./strain]
type = ADComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
block = 1
[../]
[./stress]
type = ADComputeLinearElasticStress
block = 1
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/richards/test/tests/user_objects/uo4.i
# Seff 2-phase User objects give the correct value
#
# If you want to add another test for another UserObject
# then add the UserObject, add a Function defining the expected result,
# add an AuxVariable and AuxKernel that will record the UserObjects value
# and finally add a NodalL2Error that compares this with the Function
#
# Here pressure is x where x is between -5 and 5
[UserObjects]
[./Seff2waterVG]
type = RichardsSeff2waterVG
m = 0.8
al = 0.3
[../]
[./Seff2gasVG]
type = RichardsSeff2gasVG
m = 0.8
al = 0.3
[../]
[./Seff2waterVGshifted]
type = RichardsSeff2waterVGshifted
m = 0.8
al = 0.3
shift = 2
[../]
[./Seff2gasVGshifted]
type = RichardsSeff2gasVGshifted
m = 0.8
al = 0.3
shift = 2
[../]
# following are unimportant in this test
[./PPNames]
type = RichardsVarNames
richards_vars = 'pwater pgas'
[../]
[./DensityConstBulk]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./RelPermPower]
type = RichardsRelPermPower
simm = 0.10101
n = 2
[../]
[./Saturation]
type = RichardsSat
s_res = 0.05
sum_s_res = 0.1
[../]
[./SUPGstandard]
type = RichardsSUPGstandard
p_SUPG = 1
[../]
[]
[Functions]
[./initial_pwater]
type = ParsedFunction
value = x
[../]
[./initial_pgas]
type = ParsedFunction
value = 5.0
[../]
[./answer_Seff2waterVG]
type = ParsedFunction
value = (1+max((-(x-5))*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '0.3 0.8'
[../]
[./answer_dSeff2waterVG]
type = GradParsedFunction
direction = '1E-5 0 0'
value = (1+max((-(x-5))*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '0.3 0.8'
[../]
[./answer_d2Seff2waterVG]
type = Grad2ParsedFunction
direction = '1E-4 0 0'
value = (1+max((-(x-5))*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '0.3 0.8'
[../]
[./answer_Seff2gasVG]
type = ParsedFunction
value = 1-(1+max((-(x-5))*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '0.3 0.8'
[../]
[./answer_dSeff2gasVG]
type = GradParsedFunction
direction = '1E-5 0 0'
value = 1-(1+max((-(x-5))*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '0.3 0.8'
[../]
[./answer_d2Seff2gasVG]
type = Grad2ParsedFunction
direction = '1E-4 0 0'
value = 1-(1+max((-(x-5))*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '0.3 0.8'
[../]
[./answer_Seff2waterVGshifted]
type = ParsedFunction
value = ((1+max((-(x-5-shift))*al,0)^(1/(1-m)))^(-m))/((1+max((-(-shift))*al,0)^(1/(1-m)))^(-m))
vars = 'al m shift'
vals = '0.3 0.8 2'
[../]
[./answer_dSeff2waterVGshifted]
type = GradParsedFunction
direction = '1E-5 0 0'
value = ((1+max((-(x-5-shift))*al,0)^(1/(1-m)))^(-m))/((1+max((-(-shift))*al,0)^(1/(1-m)))^(-m))
vars = 'al m shift'
vals = '0.3 0.8 2'
[../]
[./answer_d2Seff2waterVGshifted]
type = Grad2ParsedFunction
direction = '1E-4 0 0'
value = ((1+max((-(x-5-shift))*al,0)^(1/(1-m)))^(-m))/((1+max((-(-shift))*al,0)^(1/(1-m)))^(-m))
vars = 'al m shift'
vals = '0.3 0.8 2'
[../]
[./answer_Seff2gasVGshifted]
type = ParsedFunction
value = 1-((1+max((-(x-5-shift))*al,0)^(1/(1-m)))^(-m))/((1+max((-(-shift))*al,0)^(1/(1-m)))^(-m))
vars = 'al m shift'
vals = '0.3 0.8 2'
[../]
[./answer_dSeff2gasVGshifted]
type = GradParsedFunction
direction = '1E-5 0 0'
value = 1-((1+max((-(x-5-shift))*al,0)^(1/(1-m)))^(-m))/((1+max((-(-shift))*al,0)^(1/(1-m)))^(-m))
vars = 'al m shift'
vals = '0.3 0.8 2'
[../]
[./answer_d2Seff2gasVGshifted]
type = Grad2ParsedFunction
direction = '1E-4 0 0'
value = 1-((1+max((-(x-5-shift))*al,0)^(1/(1-m)))^(-m))/((1+max((-(-shift))*al,0)^(1/(1-m)))^(-m))
vars = 'al m shift'
vals = '0.3 0.8 2'
[../]
[]
[AuxVariables]
[./Seff2waterVG_Aux]
[../]
[./dSeff2waterVG_Aux]
[../]
[./d2Seff2waterVG_Aux]
[../]
[./Seff2gasVG_Aux]
[../]
[./dSeff2gasVG_Aux]
[../]
[./d2Seff2gasVG_Aux]
[../]
[./Seff2waterVGshifted_Aux]
[../]
[./dSeff2waterVGshifted_Aux]
[../]
[./d2Seff2waterVGshifted_Aux]
[../]
[./Seff2gasVGshifted_Aux]
[../]
[./dSeff2gasVGshifted_Aux]
[../]
[./d2Seff2gasVGshifted_Aux]
[../]
[./check_Aux]
[../]
[]
[AuxKernels]
[./Seff2waterVG_AuxK]
type = RichardsSeffAux
variable = Seff2waterVG_Aux
seff_UO = Seff2waterVG
pressure_vars = 'pwater pgas'
[../]
[./dSeff2waterVG_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff2waterVG_Aux
seff_UO = Seff2waterVG
pressure_vars = 'pwater pgas'
wrtnum = 0
[../]
[./d2Seff2waterVG_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff2waterVG_Aux
seff_UO = Seff2waterVG
pressure_vars = 'pwater pgas'
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Seff2gasVG_AuxK]
type = RichardsSeffAux
variable = Seff2gasVG_Aux
seff_UO = Seff2gasVG
pressure_vars = 'pwater pgas'
[../]
[./dSeff2gasVG_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff2gasVG_Aux
seff_UO = Seff2gasVG
pressure_vars = 'pwater pgas'
wrtnum = 0
[../]
[./d2Seff2gasVG_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff2gasVG_Aux
seff_UO = Seff2gasVG
pressure_vars = 'pwater pgas'
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Seff2waterVGshifted_AuxK]
type = RichardsSeffAux
variable = Seff2waterVGshifted_Aux
seff_UO = Seff2waterVGshifted
pressure_vars = 'pwater pgas'
[../]
[./dSeff2waterVGshifted_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff2waterVGshifted_Aux
seff_UO = Seff2waterVGshifted
pressure_vars = 'pwater pgas'
wrtnum = 0
[../]
[./d2Seff2waterVGshifted_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff2waterVGshifted_Aux
seff_UO = Seff2waterVGshifted
pressure_vars = 'pwater pgas'
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Seff2gasVGshifted_AuxK]
type = RichardsSeffAux
variable = Seff2gasVGshifted_Aux
seff_UO = Seff2gasVGshifted
pressure_vars = 'pwater pgas'
[../]
[./dSeff2gasVGshifted_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff2gasVGshifted_Aux
seff_UO = Seff2gasVGshifted
pressure_vars = 'pwater pgas'
wrtnum = 0
[../]
[./d2Seff2gasVGshifted_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff2gasVGshifted_Aux
seff_UO = Seff2gasVGshifted
pressure_vars = 'pwater pgas'
wrtnum1 = 0
wrtnum2 = 0
[../]
[./check_AuxK]
type = FunctionAux
variable = check_Aux
function = answer_d2Seff2waterVGshifted
[../]
[]
[Postprocessors]
[./cf_Seff2waterVG]
type = NodalL2Error
function = answer_Seff2waterVG
variable = Seff2waterVG_Aux
[../]
[./cf_dSeff2waterVG]
type = NodalL2Error
function = answer_dSeff2waterVG
variable = dSeff2waterVG_Aux
[../]
[./cf_d2Seff2waterVG]
type = NodalL2Error
function = answer_d2Seff2waterVG
variable = d2Seff2waterVG_Aux
[../]
[./cf_Seff2gasVG]
type = NodalL2Error
function = answer_Seff2gasVG
variable = Seff2gasVG_Aux
[../]
[./cf_dSeff2gasVG]
type = NodalL2Error
function = answer_dSeff2gasVG
variable = dSeff2gasVG_Aux
[../]
[./cf_d2Seff2gasVG]
type = NodalL2Error
function = answer_d2Seff2gasVG
variable = d2Seff2gasVG_Aux
[../]
[./cf_Seff2waterVGshifted]
type = NodalL2Error
function = answer_Seff2waterVGshifted
variable = Seff2waterVGshifted_Aux
[../]
[./cf_dSeff2waterVGshifted]
type = NodalL2Error
function = answer_dSeff2waterVGshifted
variable = dSeff2waterVGshifted_Aux
[../]
[./cf_d2Seff2waterVGshifted]
type = NodalL2Error
function = answer_d2Seff2waterVGshifted
variable = d2Seff2waterVGshifted_Aux
[../]
[./cf_Seff2gasVGshifted]
type = NodalL2Error
function = answer_Seff2gasVGshifted
variable = Seff2gasVGshifted_Aux
[../]
[./cf_dSeff2gasVGshifted]
type = NodalL2Error
function = answer_dSeff2gasVGshifted
variable = dSeff2gasVGshifted_Aux
[../]
[./cf_d2Seff2gasVGshifted]
type = NodalL2Error
function = answer_d2Seff2gasVGshifted
variable = d2Seff2gasVGshifted_Aux
[../]
[]
#############################################################################
#
# Following is largely unimportant as we are not running an actual similation
#
#############################################################################
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -5
xmax = 5
[]
[Variables]
[./pwater]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = initial_pwater
[../]
[../]
[./pgas]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = initial_pgas
[../]
[../]
[]
[Kernels]
active = 'watert gast'
[./watert]
type = RichardsMassChange
richardsVarNames_UO = PPNames
variable = pwater
[../]
[./gast]
type = RichardsMassChange
richardsVarNames_UO = PPNames
variable = pgas
[../]
[]
[Materials]
[./unimportant_material]
type = RichardsMaterial
block = 0
mat_porosity = 0.1
mat_permeability = '1E-20 0 0 0 1E-20 0 0 0 1E-20'
richardsVarNames_UO = PPNames
density_UO = 'DensityConstBulk DensityConstBulk'
relperm_UO = 'RelPermPower RelPermPower'
sat_UO = 'Saturation Saturation'
seff_UO = 'Seff2waterVG Seff2gasVG'
SUPG_UO = 'SUPGstandard SUPGstandard'
viscosity = '1E-3 1E-5'
gravity = '0 0 -10'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
[./does_nothing]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E50 1E50 10000'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 1
dt = 1E-100
[]
[Outputs]
execute_on = 'timestep_end'
active = 'csv'
file_base = uo4
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
[../]
[]
modules/combined/test/tests/elastic_patch/ad_elastic_patch_rz.i
#
# This problem is taken from the Abaqus verification manual:
# "1.5.4 Patch test for axisymmetric elements"
# The stress solution is given as:
# xx = yy = zz = 2000
# xy = 400
#
# Since the strain is 1e-3 in all three directions, the new density should be
# new_density = original_density * V_0 / V
# new_density = 0.283 / (1 + 1e-3 + 1e-3 + 1e-3) = 0.282153
[GlobalParams]
displacements = 'disp_x disp_y'
temperature = temp
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_patch_rz.e
[]
[Variables]
[./temp]
initial_condition = 117.56
[../]
[]
[Modules/TensorMechanics/Master/All]
strain = SMALL
incremental = true
add_variables = true
generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx'
[]
[Kernels]
[./body]
type = BodyForce
variable = disp_y
value = 1
function = '-400/x'
[../]
[./heat]
type = TimeDerivative
variable = temp
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 10
function = '1e-3*x'
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 10
function = '1e-3*(x+y)'
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
poissons_ratio = 0.25
[../]
[./stress]
type = ComputeStrainIncrementBasedStress
[../]
[]
[Materials]
[./density]
type = ADDensity
density = 0.283
outputs = all
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
end_time = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/gravity/gravity_hex20_sm.i
# Gravity Test
#
# This test is designed to exercise the gravity body force kernel.
#
# The mesh for this problem is a rectangular bar 10 units by 1 unit
# by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero on each of side that faces a negative
# coordinate direction. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(x) = -b*x^2/(2*E)+b*L*x/E
#
# The displacement at x=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(x) = b*(L-x)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at x=0. The stress
# is reported at element centers. The element closest to x=0 sits
# at x = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at x = L where the stress is zero analytically. The nearest
# element is at x=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = false
[]
[Mesh]
file = gravity_hex20_test.e
[]
[Variables]
[./disp_x]
order = SECOND
family = LAGRANGE
[../]
[./disp_y]
order = SECOND
family = LAGRANGE
[../]
[./disp_z]
order = SECOND
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_x
value = 20
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 5
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
bulk_modulus = 0.333333333333333e6
[../]
[./density]
type = Density
block = 1
density = 2
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[./Quadrature]
order = THIRD
[../]
[]
[Outputs]
file_base = gravity_hex20_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/hertz_cyl/quart_symm_q8/hertz_cyl_qsym_1deg_template1.i
[GlobalParams]
order = SECOND
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Mesh]
file = hertz_cyl_qsym_1deg_q8.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. -0.0020 -0.0020'
[../]
[./disp_ramp_zero]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0.0 0.0'
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 4
paired_boundary = 3
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./disp_x281]
type = NodalVariableValue
nodeid = 280
variable = disp_x
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./side_x]
type = DirichletBC
variable = disp_y
boundary = '1 3'
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2 3'
value = 0.0
[../]
[./top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = disp_ramp_vert
[../]
[]
[Materials]
[./stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[../]
[./stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff2_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[./stuff3_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '3'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff3_strain]
type = ComputeFiniteStrain
block = '3'
[../]
[./stuff3_stress]
type = ComputeFiniteStrainElasticStress
block = '3'
[../]
[./stuff4_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '4'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff4_strain]
type = ComputeFiniteStrain
block = '4'
[../]
[./stuff4_stress]
type = ComputeFiniteStrainElasticStress
block = '4'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
start_time = 0.0
dt = 0.1
dtmin = 0.1
num_steps = 10
end_time = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '4'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x281 top_react_x top_react_y x_disp y_disp cont_press'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./interface]
master = 3
slave = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+11
[../]
[]
test/tests/coord_type/coord_type_rz_integrated.i
[Mesh]
type = GeneratedMesh
nx = 10
xmax = 1
ny = 10
ymax = 1
dim = 2
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[../]
[]
[BCs]
[./source]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = 'right'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[./vacuum]
boundary = 'top'
type = VacuumBC
variable = u
[../]
[]
[Functions]
[./exact_fn]
type = ConstantFunction
value = 1
[../]
[]
[ICs]
[./u]
type = ConstantIC
value = 1
variable = u
[../]
[]
test/tests/outputs/oversample/over_sampling_second_file.i
[Mesh]
type = FileMesh
# Read in and work with a second order mesh
file = wedge18_mesh.e
# If we have an oversample mesh file, we haven not yet implemented
# synchronization of its partitioning with the problem mesh, so we
# need to keep the problem mesh replicated.
parallel_type = replicated
[]
[Functions]
[./exact_fn]
type = ParsedFunction
value = t*((x*x)+(y*y))
[../]
[./forcing_fn]
type = ParsedFunction
value = -4+(x*x+y*y)
[../]
[]
[Variables]
active = 'u'
[./u]
[../]
[]
[Kernels]
active = 'ie diff ffn'
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = u
boundary = '1 2 4'
function = exact_fn
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.2
start_time = 0
num_steps = 3
[]
[Outputs]
file_base = out_wedge
[./oversample]
type = Exodus
file_base = out_wedge_oversample
file = wedge6_mesh.e
[../]
[]
modules/combined/test/tests/power_law_hardening/sm/PowerLawHardening_sm.i
# This is a test of the isotropic power law hardening constitutive model.
# In this problem, a single Hex 8 element is fixed at the bottom and pulled at the top
# at a constant rate of 0.1.
# Before yield, stress = strain (=0.1*t) as youngs modulus is 1.0.
# The yield stress for this problem is 0.25 ( as strength coefficient is 0.5 and strain rate exponent is 0.5).
# Therefore, the material should start yielding at t = 2.5 seconds and then follow stress = K *pow(strain,n) or
# stress ~ 0.5*pow(0.1*t,0.5).
[Mesh]
type = GeneratedMesh
dim = 3
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./total_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(0.1)
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./total_strain_yy]
type = MaterialTensorAux
tensor = total_strain
variable = total_strain_yy
index = 1
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = left
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = back
value = 0.0
[../]
[]
[Materials]
[./vermont]
type = SolidModel
formulation = linear
block = 0
youngs_modulus = 1.0
poissons_ratio = 0.3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
constitutive_model = powerlaw
[../]
[./powerlaw]
type = IsotropicPowerLawHardening
block = 0
strength_coefficient = 0.5 #K
strain_hardening_exponent = 0.5 #n
relative_tolerance = 1e-10
absolute_tolerance = 1e-12
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-ksp_snes_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = '201 hypre boomeramg 4'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
end_time = 5.0
dt = 0.25
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./strain_yy]
type = ElementAverageValue
variable = total_strain_yy
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template2.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl2_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/navier_stokes/test/tests/ins/RZ_cone/RZ_cone_no_parts.i
# This input file tests several different things:
# .) The axisymmetric (RZ) form of the governing equations.
# .) An open boundary.
# .) Not integrating the pressure by parts, thereby requiring a pressure pin.
# .) Natural boundary condition at the outlet.
[GlobalParams]
integrate_p_by_parts = false
laplace = false
gravity = '0 0 0'
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[Preconditioning]
[./SMP_PJFNK]
type = SMP
full = true
solve_type = Newton
[../]
[]
[Executioner]
type = Transient
dt = 0.005
dtmin = 0.005
num_steps = 5
l_max_its = 100
# Note: The Steady executioner can be used for this problem, if you
# drop the INSMomentumTimeDerivative kernels and use the following
# direct solver options.
# petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -ksp_type'
# petsc_options_value = 'lu NONZERO 1.e-10 preonly'
# Block Jacobi works well for this problem, as does "-pc_type asm
# -pc_asm_overlap 2", but an overlap of 1 does not work for some
# reason?
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
csv = true
console = true
[./out]
type = Exodus
[../]
[]
[Variables]
[./vel_x]
# Velocity in radial (r) direction
family = LAGRANGE
order = SECOND
[../]
[./vel_y]
# Velocity in axial (z) direction
family = LAGRANGE
order = SECOND
[../]
[./p]
family = LAGRANGE
order = FIRST
[../]
[]
[BCs]
[./p_corner]
# This is required, because pressure term is *not* integrated by parts.
type = DirichletBC
boundary = top_right
value = 0
variable = p
[../]
[./u_out]
type = INSMomentumNoBCBCTractionForm
boundary = top
variable = vel_x
u = vel_x
v = vel_y
p = p
component = 0
[../]
[./v_out]
type = INSMomentumNoBCBCTractionForm
boundary = top
variable = vel_y
u = vel_x
v = vel_y
p = p
component = 1
[../]
[./u_in]
type = DirichletBC
boundary = bottom
variable = vel_x
value = 0
[../]
[./v_in]
type = FunctionDirichletBC
boundary = bottom
variable = vel_y
function = 'inlet_func'
[../]
[./u_axis_and_walls]
type = DirichletBC
boundary = 'left right'
variable = vel_x
value = 0
[../]
[./v_no_slip]
type = DirichletBC
boundary = 'right'
variable = vel_y
value = 0
[../]
[]
[Kernels]
[./x_momentum_time]
type = INSMomentumTimeDerivative
variable = vel_x
[../]
[./y_momentum_time]
type = INSMomentumTimeDerivative
variable = vel_y
[../]
[./mass]
type = INSMassRZ
variable = p
u = vel_x
v = vel_y
p = p
[../]
[./x_momentum_space]
type = INSMomentumTractionFormRZ
variable = vel_x
u = vel_x
v = vel_y
p = p
component = 0
[../]
[./y_momentum_space]
type = INSMomentumTractionFormRZ
variable = vel_y
u = vel_x
v = vel_y
p = p
component = 1
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 'volume'
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
value = '-4 * x^2 + 1'
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictional_02_aug_sm.i
# This is a benchmark test that checks constraint based frictional
# contact using the augmented lagrangian method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.2 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./contact_traction]
[../]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_x = saved_x
save_in_disp_y = saved_y
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 20
nl_max_its = 200
dt = 0.1
end_time = 15
num_steps = 200
l_tol = 1e-6
nl_rel_tol = 1e-8
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 100
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.2
formulation = augmented_lagrange
system = constraint
normalize_penalty = true
al_penetration_tolerance = 1e-6
al_incremental_slip_tolerance = 1.0e-2
al_frictional_force_tolerance = 1e-3
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
modules/combined/test/tests/simple_contact/simple_contact_dirac_test.i
# Note: Run merged.i to generate a solution to compare to that doesn't use contact.
# This version of the test uses DiracKernel based contact
[Mesh]
file = contact.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y disp_z'
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
generate_output = 'stress_xx'
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
formulation = kinematic
system = DiracKernel
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/richards/test/tests/user_objects/uo1.i
# Relative-permeability User objects give the correct value
# (note that here p is x, where x runs between 0.01 and 0.99
# and that seff is p in the aux vars)
#
# If you want to add another test for another UserObject
# then add the UserObject, add a Function defining the expected result,
# add an AuxVariable and AuxKernel that will record the UserObjects value
# and finally add a NodalL2Error that compares this with the Function.
[UserObjects]
[./RelPermPower]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./RelPermPower5]
type = RichardsRelPermPower
simm = 0.0
n = 5
[../]
[./RelPermVG]
type = RichardsRelPermVG
simm = 0.0
m = 0.8
[../]
[./RelPermVG1]
type = RichardsRelPermVG1
simm = 0.0
m = 0.8
scut = 1E-6 # then we get a cubic
[../]
[./RelPermBW]
type = RichardsRelPermBW
Sn = 0.05
Ss = 0.95
Kn = 0.0
Ks = 1.0
C = 1.5
[../]
[./RelPermMonomial]
type = RichardsRelPermMonomial
simm = 0.0
n = 3
[../]
[./RelPermPowerGas]
type = RichardsRelPermPowerGas
simm = 0.0
n = 5
[../]
[./Q2PRelPermPowerGas]
type = Q2PRelPermPowerGas
simm = 0.0
n = 5
[../]
[./RelPermMonomial_zero]
type = RichardsRelPermMonomial
simm = 0.1
n = 0
zero_to_the_zero = 0
[../]
# following are unimportant in this test
[./PPNames]
type = RichardsVarNames
richards_vars = pressure
[../]
[./DensityConstBulk]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./SeffVG]
type = RichardsSeff1VG
m = 0.8
al = 1E-6
[../]
[./RelPermPower_unimportant]
type = RichardsRelPermPower
simm = 0.10101
n = 2
[../]
[./Saturation]
type = RichardsSat
s_res = 0.054321
sum_s_res = 0.054321
[../]
[./SUPGstandard]
type = RichardsSUPGstandard
p_SUPG = 1E5
[../]
[]
[Functions]
[./initial_pressure]
type = ParsedFunction
value = x
[../]
[./answer_RelPermPower]
type = ParsedFunction
value = ((n+1)*(x^n))-(n*(x^(n+1)))
vars = 'n'
vals = '2'
[../]
[./answer_dRelPermPower]
type = GradParsedFunction
direction = '1E-4 0 0'
value = ((n+1)*(x^n))-(n*(x^(n+1)))
vars = 'n'
vals = '2'
[../]
[./answer_d2RelPermPower]
type = Grad2ParsedFunction
direction = '1E-3 0 0'
value = ((n+1)*(x^n))-(n*(x^(n+1)))
vars = 'n'
vals = '2'
[../]
[./answer_RelPermPower5]
type = ParsedFunction
value = ((n+1)*(x^n))-(n*(x^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_dRelPermPower5]
type = GradParsedFunction
direction = '1E-4 0 0'
value = ((n+1)*(x^n))-(n*(x^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_d2RelPermPower5]
type = Grad2ParsedFunction
direction = '1E-5 0 0'
value = ((n+1)*(x^n))-(n*(x^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_RelPermVG]
type = ParsedFunction
value = (x^(0.5))*(1-(1-(x^(1.0/m)))^m)^2
vars = 'm'
vals = '0.8'
[../]
[./answer_dRelPermVG]
type = GradParsedFunction
direction = '1E-4 0 0'
value = (x^(0.5))*(1-(1-(x^(1.0/m)))^m)^2
vars = 'm'
vals = '0.8'
[../]
[./answer_d2RelPermVG]
type = Grad2ParsedFunction
direction = '1E-5 0 0'
value = (x^(0.5))*(1-(1-(x^(1.0/m)))^m)^2
vars = 'm'
vals = '0.8'
[../]
[./answer_RelPermVG1]
type = ParsedFunction
value = x^3
[../]
[./answer_dRelPermVG1]
type = GradParsedFunction
direction = '1E-4 0 0'
value = x^3
[../]
[./answer_d2RelPermVG1]
type = Grad2ParsedFunction
direction = '1E-5 0 0'
value = x^3
[../]
[./answer_RelPermBW]
type = ParsedFunction
value = if(x>ss,1,if(x<sn,0,kn+(((x-sn)/(ss-sn))^2)*(c-1)*(ks-kn)/(c-((x-sn)/(ss-sn)))))
vars = 'kn ks c sn ss'
vals = '0 1 1.5 0.05 0.95'
[../]
[./answer_dRelPermBW]
type = GradParsedFunction
direction = '1E-4 0 0'
value = if(x>ss,1,if(x<sn,0,kn+(((x-sn)/(ss-sn))^2)*(c-1)*(ks-kn)/(c-((x-sn)/(ss-sn)))))
vars = 'kn ks c sn ss'
vals = '0 1 1.5 0.05 0.95'
[../]
[./answer_d2RelPermBW]
type = Grad2ParsedFunction
direction = '1E-5 0 0'
value = if(x>ss,1,if(x<sn,0,kn+(((x-sn)/(ss-sn))^2)*(c-1)*(ks-kn)/(c-((x-sn)/(ss-sn)))))
vars = 'kn ks c sn ss'
vals = '0 1 1.5 0.05 0.95'
[../]
[./answer_RelPermMonomial]
type = ParsedFunction
value = x^n
vars = 'n'
vals = '3'
[../]
[./answer_dRelPermMonomial]
type = GradParsedFunction
direction = '1E-4 0 0'
value = x^n
vars = 'n'
vals = '3'
[../]
[./answer_d2RelPermMonomial]
type = Grad2ParsedFunction
direction = '1E-3 0 0'
value = x^n
vars = 'n'
vals = '3'
[../]
[./answer_RelPermMonomial_zero]
type = ParsedFunction
value = if(x>simm,1,0)
vars = 'simm'
vals = '0.1'
[../]
[./answer_dRelPermMonomial_zero]
type = GradParsedFunction
direction = '1E-4 0 0'
value = if(x>simm,1,0)
vars = 'simm'
vals = '0.1'
[../]
[./answer_d2RelPermMonomial_zero]
type = Grad2ParsedFunction
direction = '1E-3 0 0'
value = if(x>simm,1,0)
vars = 'simm'
vals = '0.1'
[../]
[./answer_RelPermPowerGas]
type = ParsedFunction
value = 1-((n+1)*((1-x)^n))+(n*((1-x)^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_dRelPermPowerGas]
type = GradParsedFunction
direction = '1E-4 0 0'
value = 1-((n+1)*((1-x)^n))+(n*((1-x)^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_d2RelPermPowerGas]
type = Grad2ParsedFunction
direction = '1E-5 0 0'
value = 1-((n+1)*((1-x)^n))+(n*((1-x)^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_Q2PRelPermPowerGas]
type = ParsedFunction
value = 1-((n+1)*(x^n))+(n*(x^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_dQ2PRelPermPowerGas]
type = GradParsedFunction
direction = '1E-4 0 0'
value = 1-((n+1)*(x^n))+(n*(x^(n+1)))
vars = 'n'
vals = '5'
[../]
[./answer_d2Q2PRelPermPowerGas]
type = Grad2ParsedFunction
direction = '1E-5 0 0'
value = 1-((n+1)*(x^n))+(n*(x^(n+1)))
vars = 'n'
vals = '5'
[../]
[]
[AuxVariables]
[./RelPermPower_Aux]
[../]
[./dRelPermPower_Aux]
[../]
[./d2RelPermPower_Aux]
[../]
[./RelPermPower5_Aux]
[../]
[./dRelPermPower5_Aux]
[../]
[./d2RelPermPower5_Aux]
[../]
[./RelPermVG_Aux]
[../]
[./dRelPermVG_Aux]
[../]
[./d2RelPermVG_Aux]
[../]
[./RelPermVG1_Aux]
[../]
[./dRelPermVG1_Aux]
[../]
[./d2RelPermVG1_Aux]
[../]
[./RelPermBW_Aux]
[../]
[./dRelPermBW_Aux]
[../]
[./d2RelPermBW_Aux]
[../]
[./RelPermMonomial_Aux]
[../]
[./dRelPermMonomial_Aux]
[../]
[./d2RelPermMonomial_Aux]
[../]
[./RelPermPowerGas_Aux]
[../]
[./dRelPermPowerGas_Aux]
[../]
[./d2RelPermPowerGas_Aux]
[../]
[./Q2PRelPermPowerGas_Aux]
[../]
[./dQ2PRelPermPowerGas_Aux]
[../]
[./d2Q2PRelPermPowerGas_Aux]
[../]
[./RelPermMonomial_zero_Aux]
[../]
[./dRelPermMonomial_zero_Aux]
[../]
[./d2RelPermMonomial_zero_Aux]
[../]
[./check_Aux]
[../]
[]
[AuxKernels]
[./RelPermPower_AuxK]
type = RichardsRelPermAux
variable = RelPermPower_Aux
relperm_UO = RelPermPower
seff_var = pressure
[../]
[./dRelPermPower_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermPower_Aux
relperm_UO = RelPermPower
seff_var = pressure
[../]
[./d2RelPermPower_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermPower_Aux
relperm_UO = RelPermPower
seff_var = pressure
[../]
[./RelPermPower5_AuxK]
type = RichardsRelPermAux
variable = RelPermPower5_Aux
relperm_UO = RelPermPower5
seff_var = pressure
[../]
[./dRelPermPower5_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermPower5_Aux
relperm_UO = RelPermPower5
seff_var = pressure
[../]
[./d2RelPermPower5_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermPower5_Aux
relperm_UO = RelPermPower5
seff_var = pressure
[../]
[./RelPermVG_AuxK]
type = RichardsRelPermAux
variable = RelPermVG_Aux
relperm_UO = RelPermVG
seff_var = pressure
[../]
[./dRelPermVG_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermVG_Aux
relperm_UO = RelPermVG
seff_var = pressure
[../]
[./d2RelPermVG_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermVG_Aux
relperm_UO = RelPermVG
seff_var = pressure
[../]
[./RelPermVG1_AuxK]
type = RichardsRelPermAux
variable = RelPermVG1_Aux
relperm_UO = RelPermVG1
seff_var = pressure
[../]
[./dRelPermVG1_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermVG1_Aux
relperm_UO = RelPermVG1
seff_var = pressure
[../]
[./d2RelPermVG1_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermVG1_Aux
relperm_UO = RelPermVG1
seff_var = pressure
[../]
[./RelPermBW_AuxK]
type = RichardsRelPermAux
variable = RelPermBW_Aux
relperm_UO = RelPermBW
seff_var = pressure
[../]
[./dRelPermBW_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermBW_Aux
relperm_UO = RelPermBW
seff_var = pressure
[../]
[./d2RelPermBW_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermBW_Aux
relperm_UO = RelPermBW
seff_var = pressure
[../]
[./RelPermMonomial_AuxK]
type = RichardsRelPermAux
variable = RelPermMonomial_Aux
relperm_UO = RelPermMonomial
seff_var = pressure
[../]
[./dRelPermMonomial_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermMonomial_Aux
relperm_UO = RelPermMonomial
seff_var = pressure
[../]
[./d2RelPermMonomial_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermMonomial_Aux
relperm_UO = RelPermMonomial
seff_var = pressure
[../]
[./RelPermPowerGas_AuxK]
type = RichardsRelPermAux
variable = RelPermPowerGas_Aux
relperm_UO = RelPermPowerGas
seff_var = pressure
[../]
[./dRelPermPowerGas_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermPowerGas_Aux
relperm_UO = RelPermPowerGas
seff_var = pressure
[../]
[./d2RelPermPowerGas_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermPowerGas_Aux
relperm_UO = RelPermPowerGas
seff_var = pressure
[../]
[./Q2PRelPermPowerGas_AuxK]
type = RichardsRelPermAux
variable = Q2PRelPermPowerGas_Aux
relperm_UO = Q2PRelPermPowerGas
seff_var = pressure
[../]
[./dQ2PRelPermPowerGas_AuxK]
type = RichardsRelPermPrimeAux
variable = dQ2PRelPermPowerGas_Aux
relperm_UO = Q2PRelPermPowerGas
seff_var = pressure
[../]
[./d2Q2PRelPermPowerGas_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2Q2PRelPermPowerGas_Aux
relperm_UO = Q2PRelPermPowerGas
seff_var = pressure
[../]
[./RelPermMonomial_zero_AuxK]
type = RichardsRelPermAux
variable = RelPermMonomial_zero_Aux
relperm_UO = RelPermMonomial_zero
seff_var = pressure
[../]
[./dRelPermMonomial_zero_AuxK]
type = RichardsRelPermPrimeAux
variable = dRelPermMonomial_zero_Aux
relperm_UO = RelPermMonomial_zero
seff_var = pressure
[../]
[./d2RelPermMonomial_zero_AuxK]
type = RichardsRelPermPrimePrimeAux
variable = d2RelPermMonomial_zero_Aux
relperm_UO = RelPermMonomial_zero
seff_var = pressure
[../]
[./check_AuxK]
type = FunctionAux
variable = check_Aux
function = answer_RelPermBW
[../]
[]
[Postprocessors]
[./cf_RelPermPower]
type = NodalL2Error
function = answer_RelPermPower
variable = RelPermPower_Aux
[../]
[./cf_dRelPermPower]
type = NodalL2Error
function = answer_dRelPermPower
variable = dRelPermPower_Aux
[../]
[./cf_d2RelPermPower]
type = NodalL2Error
function = answer_d2RelPermPower
variable = d2RelPermPower_Aux
[../]
[./cf_RelPermPower5]
type = NodalL2Error
function = answer_RelPermPower5
variable = RelPermPower5_Aux
[../]
[./cf_dRelPermPower5]
type = NodalL2Error
function = answer_dRelPermPower5
variable = dRelPermPower5_Aux
[../]
[./cf_d2RelPermPower5]
type = NodalL2Error
function = answer_d2RelPermPower5
variable = d2RelPermPower5_Aux
[../]
[./cf_RelPermVG]
type = NodalL2Error
function = answer_RelPermVG
variable = RelPermVG_Aux
[../]
[./cf_dRelPermVG]
type = NodalL2Error
function = answer_dRelPermVG
variable = dRelPermVG_Aux
[../]
[./cf_d2RelPermVG]
type = NodalL2Error
function = answer_d2RelPermVG
variable = d2RelPermVG_Aux
[../]
[./cf_RelPermVG1]
type = NodalL2Error
function = answer_RelPermVG1
variable = RelPermVG1_Aux
[../]
[./cf_dRelPermVG1]
type = NodalL2Error
function = answer_dRelPermVG1
variable = dRelPermVG1_Aux
[../]
[./cf_d2RelPermVG1]
type = NodalL2Error
function = answer_d2RelPermVG1
variable = d2RelPermVG1_Aux
[../]
[./cf_RelPermBW]
type = NodalL2Error
function = answer_RelPermBW
variable = RelPermBW_Aux
[../]
[./cf_dRelPermBW]
type = NodalL2Error
function = answer_dRelPermBW
variable = dRelPermBW_Aux
[../]
[./cf_d2RelPermBW]
type = NodalL2Error
function = answer_d2RelPermBW
variable = d2RelPermBW_Aux
[../]
[./cf_RelPermMonomial]
type = NodalL2Error
function = answer_RelPermMonomial
variable = RelPermMonomial_Aux
[../]
[./cf_dRelPermMonomial]
type = NodalL2Error
function = answer_dRelPermMonomial
variable = dRelPermMonomial_Aux
[../]
[./cf_d2RelPermMonomial]
type = NodalL2Error
function = answer_d2RelPermMonomial
variable = d2RelPermMonomial_Aux
[../]
[./cf_RelPermPowerGas]
type = NodalL2Error
function = answer_RelPermPowerGas
variable = RelPermPowerGas_Aux
[../]
[./cf_dRelPermPowerGas]
type = NodalL2Error
function = answer_dRelPermPowerGas
variable = dRelPermPowerGas_Aux
[../]
[./cf_d2RelPermPowerGas]
type = NodalL2Error
function = answer_d2RelPermPowerGas
variable = d2RelPermPowerGas_Aux
[../]
[./cf_Q2PRelPermPowerGas]
type = NodalL2Error
function = answer_Q2PRelPermPowerGas
variable = Q2PRelPermPowerGas_Aux
[../]
[./cf_dQ2PRelPermPowerGas]
type = NodalL2Error
function = answer_dQ2PRelPermPowerGas
variable = dQ2PRelPermPowerGas_Aux
[../]
[./cf_d2Q2PRelPermPowerGas]
type = NodalL2Error
function = answer_d2Q2PRelPermPowerGas
variable = d2Q2PRelPermPowerGas_Aux
[../]
[./cf_RelPermMonomial_zero]
type = NodalL2Error
function = answer_RelPermMonomial_zero
variable = RelPermMonomial_zero_Aux
[../]
[./cf_dRelPermMonomial_zero]
type = NodalL2Error
function = answer_dRelPermMonomial_zero
variable = dRelPermMonomial_zero_Aux
[../]
[./cf_d2RelPermMonomial_zero]
type = NodalL2Error
function = answer_d2RelPermMonomial_zero
variable = d2RelPermMonomial_zero_Aux
[../]
[]
#############################################################################
#
# Following is largely unimportant as we are not running an actual similation
#
#############################################################################
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0.01
xmax = 0.99
[]
[Variables]
[./pressure]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = initial_pressure
[../]
[../]
[]
[Kernels]
active = 'richardsf richardst'
[./richardst]
type = RichardsMassChange
richardsVarNames_UO = PPNames
variable = pressure
[../]
[./richardsf]
type = RichardsFlux
richardsVarNames_UO = PPNames
variable = pressure
[../]
[]
[Materials]
[./unimportant_material]
type = RichardsMaterial
block = 0
mat_porosity = 0.1
mat_permeability = '1E-20 0 0 0 1E-20 0 0 0 1E-20'
richardsVarNames_UO = PPNames
density_UO = DensityConstBulk
relperm_UO = RelPermPower_unimportant
sat_UO = Saturation
seff_UO = SeffVG
SUPG_UO = SUPGstandard
viscosity = 1E-3
gravity = '0 0 -10'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
[./does_nothing]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E50 1E50 10000'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 1
dt = 1E-100
[]
[Outputs]
execute_on = 'timestep_end'
active = 'csv'
file_base = uo1
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = pressure
[../]
[]
test/tests/outputs/iterative/output_end_step.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
end_step = 5
[../]
[]
test/tests/outputs/iterative/output_start_step.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
start_step = 12
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick3_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x28]
type = NodalVariableValue
nodeid = 27
variable = disp_x
[../]
[./disp_x33]
type = NodalVariableValue
nodeid = 32
variable = disp_x
[../]
[./disp_y28]
type = NodalVariableValue
nodeid = 27
variable = disp_y
[../]
[./disp_y33]
type = NodalVariableValue
nodeid = 32
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x28 disp_y28 disp_x33 disp_y33 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+6
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl4_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/phase_field/test/tests/new_initial_conditions/SmoothCircleIC_tanh.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 30
ymax = 30
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = SmoothCircleIC
variable = c
x1 = 15.0
y1 = 15.0
radius = 8.0
invalue = 1.0
outvalue = -0.8
int_width = 8.0
profile = TANH
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Executioner]
type = Steady
[]
[Problem]
kernel_coverage_check = false
solve = false
[]
[Outputs]
exodus = false
[./out]
type = Exodus
refinements = 1
[../]
[]
test/tests/outputs/oversample/adapt.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
nz = 0
zmax = 0
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[Functions]
[./force]
type = ParsedFunction
value = t*t
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./force]
type = BodyForce
variable = u
function = force
[../]
[]
[BCs]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[]
[Executioner]
type = Transient
num_steps = 4
dt = 1
solve_type = PJFNK
[]
[Adaptivity]
steps = 1
marker = box
max_h_level = 2
[./Markers]
[./box]
bottom_left = '0.3 0.3 0'
inside = refine
top_right = '0.6 0.6 0'
outside = do_nothing
type = BoxMarker
[../]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./oversample]
type = Exodus
refinements = 2
file_base = adapt_out_oversample
execute_on = 'initial timestep_end'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane3_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/materials/output/output_via_outputs.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
ny = 5
xmax = 10
ymax = 10
uniform_refine = 1
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 10
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Materials]
[./test_material]
type = OutputTestMaterial
block = 0
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 2
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
output_material_properties = true
[../]
[]
modules/navier_stokes/test/tests/ins/mms/supg/supg_pspg_adv_dominated_mms.i
mu=1.5e-4
rho=2.5
[GlobalParams]
gravity = '0 0 0'
supg = true
pspg = true
convective_term = true
integrate_p_by_parts = false
transient_term = true
laplace = true
u = vel_x
v = vel_y
p = p
alpha = 1e0
order = FIRST
family = LAGRANGE
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
elem_type = QUAD9
nx = 4
ny = 4
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./vel_x]
[../]
[./vel_y]
[../]
[./p]
order = FIRST
[../]
[]
[Kernels]
# mass
[./mass]
type = INSMass
variable = p
x_vel_forcing_func = vel_x_source_func
y_vel_forcing_func = vel_y_source_func
[../]
[./x_time]
type = INSMomentumTimeDerivative
variable = vel_x
[../]
[./y_time]
type = INSMomentumTimeDerivative
variable = vel_y
[../]
# x-momentum, space
[./x_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_x
component = 0
forcing_func = vel_x_source_func
[../]
# y-momentum, space
[./y_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_y
component = 1
forcing_func = vel_y_source_func
[../]
[./p_source]
type = BodyForce
function = p_source_func
variable = p
[../]
[]
[BCs]
[./vel_x]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = vel_x_func
variable = vel_x
[../]
[./vel_y]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = vel_y_func
variable = vel_y
[../]
[./p]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = p_func
variable = p
[../]
[]
[Functions]
[./vel_x_source_func]
type = ParsedFunction
value = '-${mu}*(-0.028*pi^2*x^2*sin(0.2*pi*x*y) - 0.028*pi^2*y^2*sin(0.2*pi*x*y) - 0.1*pi^2*sin(0.5*pi*x) - 0.4*pi^2*sin(pi*y)) + ${rho}*(0.14*pi*x*cos(0.2*pi*x*y) + 0.4*pi*cos(pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*y*cos(0.2*pi*x*y) + 0.25*pi*cos(0.5*pi*x)'
[../]
[./vel_y_source_func]
type = ParsedFunction
value = '-${mu}*(-0.018*pi^2*x^2*sin(0.3*pi*x*y) - 0.018*pi^2*y^2*sin(0.3*pi*x*y) - 0.384*pi^2*sin(0.8*pi*x) - 0.027*pi^2*sin(0.3*pi*y)) + ${rho}*(0.06*pi*x*cos(0.3*pi*x*y) + 0.09*pi*cos(0.3*pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.06*pi*y*cos(0.3*pi*x*y) + 0.48*pi*cos(0.8*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*x*cos(0.2*pi*x*y) + 0.3*pi*cos(0.3*pi*y)'
[../]
[./p_source_func]
type = ParsedFunction
value = '-0.06*pi*x*cos(0.3*pi*x*y) - 0.14*pi*y*cos(0.2*pi*x*y) - 0.2*pi*cos(0.5*pi*x) - 0.09*pi*cos(0.3*pi*y)'
[../]
[./vel_x_func]
type = ParsedFunction
value = '0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5'
[../]
[./vel_y_func]
type = ParsedFunction
value = '0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3'
[../]
[./p_func]
type = ParsedFunction
value = '0.5*sin(0.5*pi*x) + 1.0*sin(0.3*pi*y) + 0.5*sin(0.2*pi*x*y) + 0.5'
[../]
[./vxx_func]
type = ParsedFunction
value = '0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x)'
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 0
prop_names = 'rho mu'
prop_values = '${rho} ${mu}'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_view'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu NONZERO superlu_dist'
line_search = 'none'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-12
nl_max_its = 10
l_tol = 1e-6
l_max_its = 10
# To run to steady-state, set num-steps to some large number (1000000 for example)
type = Transient
num_steps = 10
steady_state_detection = true
steady_state_tolerance = 1e-10
[./TimeStepper]
dt = .1
type = IterationAdaptiveDT
cutback_factor = 0.4
growth_factor = 1.2
optimal_iterations = 20
[../]
[]
[Outputs]
execute_on = 'final'
[./exodus]
type = Exodus
[../]
[./csv]
type = CSV
[../]
[]
[Postprocessors]
[./L2vel_x]
type = ElementL2Error
variable = vel_x
function = vel_x_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vel_y]
variable = vel_y
function = vel_y_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2p]
variable = p
function = p_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vxx]
variable = vxx
function = vxx_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
[AuxVariables]
[./vxx]
family = MONOMIAL
order = FIRST
[../]
[]
[AuxKernels]
[./vxx]
type = VariableGradientComponent
component = x
variable = vxx
gradient_variable = vel_x
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template1_sm.i
[Mesh]
file = brick4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x59]
type = NodalVariableValue
nodeid = 58
variable = disp_x
[../]
[./disp_x64]
type = NodalVariableValue
nodeid = 63
variable = disp_x
[../]
[./disp_y59]
type = NodalVariableValue
nodeid = 58
variable = disp_y
[../]
[./disp_y64]
type = NodalVariableValue
nodeid = 63
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x59 disp_y59 disp_x64 disp_y64 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
python/peacock/tests/common/transient_with_date.i
###########################################################
# This is a simple test with a time-dependent problem
# demonstrating the use of a "Transient" Executioner.
#
# @Requirement F1.10
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD4
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = ConstantIC
value = 0
[../]
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
# dudt = 3*t^2*(x^2 + y^2)
value = 3*t*t*((x*x)+(y*y))-(4*t*t*t)
[../]
[./exact_fn]
type = ParsedFunction
value = t*t*t*((x*x)+(y*y))
[../]
[]
[Kernels]
active = 'diff ie ffn'
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
active = 'all'
[./all]
type = FunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
[../]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Postprocessors]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[./dt]
type = TimestepSize
[../]
[]
[Executioner]
type = Transient
scheme = 'implicit-euler'
# Preconditioned JFNK (default)
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 5
dt = 0.1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = with_date
exodus = true
[./with_date]
type = Exodus
file_base = with_date
append_date = true
append_date_format = '%Y-%m-%d'
[../]
[]
test/tests/materials/stateful_prop/computing_initial_residual_test.i
[Mesh]
dim = 3
file = cube.e
[]
[Variables]
[./u]
[../]
[]
[AuxVariables]
[./prop1]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./prop1_output]
type = MaterialRealAux
variable = prop1
property = thermal_conductivity
[../]
[]
[Kernels]
[./heat]
type = MatDiffusionTest
variable = u
prop_name = thermal_conductivity
[../]
[./ie]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./bottom]
type = DirichletBC
variable = u
boundary = 1
value = 0.0
[../]
[./top]
type = DirichletBC
variable = u
boundary = 2
value = 1.0
[../]
[]
[Materials]
[./stateful]
type = ComputingInitialTest
block = 1
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
l_max_its = 10
start_time = 0.0
num_steps = 5
dt = .1
[]
[Outputs]
file_base = computing_initial_residual_test_out
[./out]
type = Exodus
elemental_as_nodal = true
execute_elemental_on = none
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/rd01.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 120
ny = 1
xmin = 0
xmax = 6
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-2 1 10 500 5000 5000'
x = '0 10 100 1000 10000 100000'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[../]
[]
[Variables]
[./pressure]
initial_condition = -72620.4
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./base]
type = PorousFlowSink
boundary = right
flux_function = -2.315E-3
variable = pressure
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 359424
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = rd01
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[./along_line]
type = CSV
execute_on = final
[../]
[]
modules/phase_field/examples/measure_interface_energy/1Dinterface_energy.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmax = 100
xmin = 0
elem_type = EDGE
[]
[AuxVariables]
[./local_energy]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./local_free_energy]
type = TotalFreeEnergy
variable = local_energy
kappa_names = kappa_c
interfacial_vars = c
[../]
[]
[Variables]
[./c]
order = FIRST
family = LAGRANGE
scaling = 1e1
[./InitialCondition]
type = RampIC
variable = c
value_left = 0
value_right = 1
[../]
[../]
[./w]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./c_res]
type = SplitCHParsed
variable = c
f_name = F
kappa_name = kappa_c
w = w
[../]
[./w_res]
type = SplitCHWRes
variable = w
mob_name = M
[../]
[./time]
type = CoupledTimeDerivative
variable = w
v = c
[../]
[]
[Functions]
[./Int_energy]
type = ParsedFunction
vals = 'total_solute Cleft Cright Fleft Fright volume'
value = '((total_solute-Cleft*volume)/(Cright-Cleft))*Fright+(volume-(total_solute-Cleft*volume)/(Cright-Cleft))*Fleft'
vars = 'total_solute Cleft Cright Fleft Fright volume'
[../]
[./Diff]
type = ParsedFunction
vals = 'total_free_energy total_no_int'
vars = 'total_free_energy total_no_int'
value = total_free_energy-total_no_int
[../]
[]
[Materials]
[./consts]
type = GenericConstantMaterial
prop_names = 'kappa_c M'
prop_values = '25 150'
[../]
[./Free_energy]
type = DerivativeParsedMaterial
f_name = F
function = 'c^2*(c-1)^2'
args = c
derivative_order = 2
[../]
[]
[Postprocessors]
# The total free energy of the simulation cell to observe the energy reduction.
[./total_free_energy]
type = ElementIntegralVariablePostprocessor
variable = local_energy
[../]
# for testing we also monitor the total solute amount, which should be conserved,
# gives Cavg in % for this problem.
[./total_solute]
type = ElementIntegralVariablePostprocessor
variable = c
[../]
# Get simulation cell size (1D volume) from postprocessor
[./volume]
type = ElementIntegralMaterialProperty
mat_prop = 1
[../]
# Find concentration in each phase using SideAverageValue
[./Cleft]
type = SideAverageValue
boundary = left
variable = c
[../]
[./Cright]
type = SideAverageValue
boundary = right
variable = c
[../]
# Find local energy in each phase by checking boundaries
[./Fleft]
type = SideAverageValue
boundary = left
variable = local_energy
[../]
[./Fright]
type = SideAverageValue
boundary = right
variable = local_energy
[../]
# Use concentrations and energies to find total free energy without any interface,
# only applies once equilibrium is reached!!
# Difference between energy with and without interface
# gives interface energy per unit area.
[./total_no_int]
type = FunctionValuePostprocessor
function = Int_energy
[../]
[./Energy_of_Interface]
type = FunctionValuePostprocessor
function = Diff
[../]
[]
[Preconditioning]
# This preconditioner makes sure the Jacobian Matrix is fully populated. Our
# kernels compute all Jacobian matrix entries.
# This allows us to use the Newton solver below.
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
# Automatic differentiation provides a _full_ Jacobian in this example
# so we can safely use NEWTON for a fast solve
solve_type = 'NEWTON'
l_max_its = 15
l_tol = 1.0e-6
nl_max_its = 15
nl_rel_tol = 1.0e-10
nl_abs_tol = 1.0e-4
start_time = 0.0
# make sure that the result obtained for the interfacial free energy is fully converged
end_time = 40
[./TimeStepper]
type = SolutionTimeAdaptiveDT
dt = 0.5
[../]
[]
[Outputs]
gnuplot = true
csv = true
[./exodus]
type = Exodus
show = 'c local_energy'
execute_on = 'failed initial nonlinear timestep_end final'
[../]
[./console]
type = Console
execute_on = 'FAILED INITIAL NONLINEAR TIMESTEP_END final'
[../]
perf_graph = true
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_mu_0_2_pen_sm.i
[Mesh]
file = ring3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/materials/ad_material/ad_stateful_material.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 2
[]
[Variables]
[./u]
initial_condition = 1
[../]
[]
[Kernels]
[./diff]
type = ADMatDiffusionTest
variable = u
prop_to_use = 'AdAd'
ad_mat_prop = 'diffusivity'
regular_mat_prop = 'unused_diffusivity'
[../]
[]
[Kernels]
[./force]
type = BodyForce
variable = u
value = 1
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Materials]
[./constant_material]
type = GenericConstantMaterial
prop_names = 'unused_diffusivity'
prop_values = '0'
[../]
[./ad_stateful]
type = ADStatefulMaterial
u = u
[../]
[]
[Executioner]
type = Transient
num_steps = 5
line_search = 'none'
solve_type = 'Newton'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
l_tol = 1e-10
nl_rel_tol = 1e-9
[]
[Outputs]
[./exodus]
type = Exodus
show_material_properties = 'diffusivity'
[../]
[]
modules/combined/test/tests/simple_contact/simple_contact_test.i
# Note: Run merged.i to generate a solution to compare to that doesn't use contact.
[Mesh]
file = contact.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y disp_z'
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
generate_output = 'stress_xx'
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
formulation = kinematic
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/simplest_contact/simplest_contact_test.i
[Mesh]
file = simplest_contact.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
[../]
[]
[Constraints]
[./contact_x]
type = MultiDContactConstraint
variable = disp_x
master_variable = disp_x
component = 0
slave = 2
master = 3
penalty = 1e6
[../]
[./contact_y]
type = MultiDContactConstraint
variable = disp_y
master_variable = disp_y
component = 1
slave = 2
master = 3
penalty = 1e6
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[] # BCs
[Materials]
[./stiffStuff1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[] # Materials
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Output
modules/solid_mechanics/test/tests/cracking/cracking.i
#
# Simple pull test for cracking.
# The stress increases for two steps and then drops to zero.
#
[Mesh]
file = cracking_test.e
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./displ]
type = PiecewiseLinear
x = '0 1 2 3 4'
y = '0 1 0 -1 0'
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./strain_xx]
type = MaterialTensorAux
variable = strain_xx
tensor = total_strain
index = 0
[../]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
tensor = stress
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
variable = stress_yy
tensor = stress
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
tensor = stress
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
variable = stress_xy
tensor = stress
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
variable = stress_yz
tensor = stress
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
variable = stress_zx
tensor = stress
index = 5
[../]
[]
[BCs]
[./pull]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = displ
[../]
[./left]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom]
type = DirichletBC
variable = disp_y
boundary = 2
value = 0.0
[../]
[./back]
type = DirichletBC
variable = disp_z
boundary = 3
value = 0.0
[../]
[]
[Materials]
[./fred]
type = Elastic
block = 1
youngs_modulus = 2.8e7
poissons_ratio = 0 #.3
cracking_stress = 1.68e6
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-ksp_gmres_restart -pc_type -sub_pc_type'
petsc_options_value = '101 asm lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-8
nl_abs_tol = 1e-8
l_tol = 1e-5
start_time = 0.0
end_time = 0.1
dt = 0.025
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template2.i
[GlobalParams]
order = FIRST
family = LAGRANGE
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring1_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/tensor_mechanics/test/tests/weak_plane_shear/large_deform1.i
# rotate the mesh by 90degrees
# then pull in the z direction - should be no plasticity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[]
[BCs]
# rotate:
# ynew = c*y + s*z. znew = -s*y + c*z
[./bottomx]
type = FunctionDirichletBC
variable = disp_x
boundary = back
function = '0'
[../]
[./bottomy]
type = FunctionDirichletBC
variable = disp_y
boundary = back
function = '0*y+1*z-y'
[../]
[./bottomz]
type = FunctionDirichletBC
variable = disp_z
boundary = back
function = '-1*y+0*z-z+if(t>0,0.5-y,0)' # note that this uses original nodal values of (x,y,z)
[../]
[./topx]
type = FunctionDirichletBC
variable = disp_x
boundary = front
function = '0'
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
boundary = front
function = '0*y+1*z-y'
[../]
[./topz]
type = FunctionDirichletBC
variable = disp_z
boundary = front
function = '-1*y+0*z-z+if(t>0,0.5-y,0)' # note that this uses original nodal values of (x,y,z)
[../]
[]
[AuxVariables]
[./stress_xz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./yield_fcn]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[../]
[./stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
[../]
[./stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[../]
[./yield_fcn_auxk]
type = MaterialStdVectorAux
property = plastic_yield_function
index = 0
variable = yield_fcn
[../]
[]
[Postprocessors]
[./s_xz]
type = PointValue
point = '0 0 0'
variable = stress_xz
[../]
[./s_yz]
type = PointValue
point = '0 0 0'
variable = stress_yz
[../]
[./s_zz]
type = PointValue
point = '0 0 0'
variable = stress_zz
[../]
[./f]
type = PointValue
point = '0 0 0'
variable = yield_fcn
[../]
[]
[UserObjects]
[./coh]
type = TensorMechanicsHardeningConstant
value = 1
[../]
[./tanphi]
type = TensorMechanicsHardeningConstant
value = 0.5
[../]
[./tanpsi]
type = TensorMechanicsHardeningConstant
value = 0.1111077
[../]
[./wps]
type = TensorMechanicsPlasticWeakPlaneShear
cohesion = coh
tan_friction_angle = tanphi
tan_dilation_angle = tanpsi
smoother = 0.5
yield_function_tolerance = 1E-6
internal_constraint_tolerance = 1E-6
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeElasticityTensor
block = 0
fill_method = symmetric_isotropic
C_ijkl = '0 1E6'
[../]
[./strain]
type = ComputeFiniteStrain
block = 0
displacements = 'disp_x disp_y disp_z'
[../]
[./mc]
type = ComputeMultiPlasticityStress
block = 0
plastic_models = wps
transverse_direction = '0 0 1'
ep_plastic_tolerance = 1E-5
debug_fspb = crash
[../]
[]
[Executioner]
start_time = -1
end_time = 1
dt = 1
type = Transient
[]
[Outputs]
file_base = large_deform1
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
[../]
[]
test/tests/transfers/multiapp_projection_transfer/fromsub_master.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
ymin = 0
xmax = 9
ymax = 9
nx = 9
ny = 9
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[v_nodal]
[]
[v_elemental]
order = CONSTANT
family = MONOMIAL
[]
[x_nodal]
[]
[x_elemental]
order = CONSTANT
family = MONOMIAL
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 1
[]
[]
[Executioner]
type = Transient
num_steps = 1
dt = 1
solve_type = 'NEWTON'
[]
[Outputs]
[out]
type = Exodus
elemental_as_nodal = true
[]
[]
[MultiApps]
[sub]
type = TransientMultiApp
app_type = MooseTestApp
positions = '1 1 0 5 5 0'
input_files = fromsub_sub.i
[]
[]
[Transfers]
[v_nodal_tr]
type = MultiAppProjectionTransfer
direction = from_multiapp
multi_app = sub
source_variable = v
variable = v_nodal
[]
[v_elemental_tr]
type = MultiAppProjectionTransfer
direction = from_multiapp
multi_app = sub
source_variable = v
variable = v_elemental
[]
[x_elemental_tr]
type = MultiAppProjectionTransfer
direction = from_multiapp
multi_app = sub
source_variable = x
variable = x_elemental
[]
[x_nodal_tr]
type = MultiAppProjectionTransfer
direction = from_multiapp
multi_app = sub
source_variable = x
variable = x_nodal
[]
[]
modules/combined/test/tests/gravity/gravity_rz_sm.i
# This test uses small strain formulation, and the use_displaced_mesh
# is set to false for the kernels
#
# Gravity Test
#
# This test is designed to exercise the gravity body force rz kernel.
#
# The mesh for this problem is a rectangle 10 units by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero at the top. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(y) = -b*y^2/(2*E)+b*L*y/E
#
# The displacement at y=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(y) = b*(L-y)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at y=0. The stress
# is reported at element centers. The element closest to y=0 sits
# at y = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at y = L where the stress is zero analytically. The nearest
# element is at y=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = gravity_rz_test.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_y
value = 20
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[]
[BCs]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
shear_modulus = 0.5e6
lambda = 0.0
formulation = NonlinearRZ
[../]
[./density]
type = Density
block = 1
density = 2
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = gravity_rz_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/transfers/multiapp_nearest_node_transfer/fromsub_displaced_sub.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
displacements = 'disp_x disp_y'
# Transferring data from a sub application is currently only
# supported with a ReplicatedMesh
parallel_type = replicated
[]
[Variables]
[./u]
[../]
[]
[AuxVariables]
[./disp_x]
initial_condition = -0.2
[../]
[./disp_y]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 1
dt = 1
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
use_displaced = true
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/frictional_02_penalty.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.2 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.2
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/gravity/gravity_rz_quad8_sm.i
# This test uses small strain formulation, and the use_displaced_mesh
# is set to false for the kernels
#
# Gravity Test
#
# This test is designed to exercise the gravity body force rz kernel.
#
# The mesh for this problem is a rectangle 10 units by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero at the top. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(y) = -b*y^2/(2*E)+b*L*y/E
#
# The displacement at y=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(y) = b*(L-y)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at y=0. The stress
# is reported at element centers. The element closest to y=0 sits
# at y = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at y = L where the stress is zero analytically. The nearest
# element is at y=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = gravity_rz_quad8_test.e
[]
[Variables]
[./disp_x]
order = SECOND
family = LAGRANGE
[../]
[./disp_y]
order = SECOND
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_y
value = 20
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[]
[BCs]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
shear_modulus = 0.5e6
lambda = 0.0
formulation = NonlinearRZ
[../]
[./density]
type = Density
block = 1
density = 2
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[./Quadrature]
order = THIRD
[../]
[]
[Outputs]
file_base = gravity_rz_quad8_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/porous_flow/test/tests/buckley_leverett/bl01.i
# Buckley-Leverett 1-phase.
# The front starts at (around) x=5, and at t=50 it should
# have moved to x=9.6. The version below has a nonzero
# suction function, and at t=50, the front sits between
# (about) x=9.6 and x=9.9. Changing the van-Genuchten
# al parameter to 1E-4 softens the front so it sits between
# (about) x=9.7 and x=10.4, and the simulation runs much faster.
# With al=1E-2 and nx=600, the front sits between x=9.6 and x=9.8,
# but takes about 100 times longer to run.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[./pp]
[./InitialCondition]
type = FunctionIC
function = 'max((1000000-x/5*1000000)-20000,-20000)'
[../]
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = pp
boundary = left
value = 980000
[../]
[]
[AuxVariables]
[./sat]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./sat]
type = MaterialStdVectorAux
variable = sat
execute_on = timestep_end
index = 0
property = PorousFlow_saturation_qp
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-3
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e6
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./temperature]
type = PorousFlowTemperature
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[../]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
[../]
[./relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.15
[../]
[]
[Preconditioning]
active = andy
[./andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 20'
[../]
[]
[Functions]
[./timestepper]
type = PiecewiseLinear
x = '0 0.01 0.1 1 1.5 2 20 30 40 50'
y = '0.01 0.1 0.2 0.3 0.1 0.3 0.3 0.4 0.4 0.5'
[../]
[]
[Executioner]
type = Transient
end_time = 50
[./TimeStepper]
type = FunctionDT
function = timestepper
[../]
[]
[VectorPostprocessors]
[./pp]
type = LineValueSampler
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = pp
[../]
[./sat]
type = LineValueSampler
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = sat
[../]
[]
[Outputs]
file_base = bl01
[./csv]
type = CSV
sync_only = true
sync_times = '0.01 50'
[../]
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[]
test/tests/outputs/intervals/no_intermediate.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 4
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
execute_on = 'initial final'
[../]
[]
modules/heat_conduction/test/tests/meshed_gap_thermal_contact/meshed_annulus_thermal_contact.i
[Mesh]
[fmesh]
type = FileMeshGenerator
file = meshed_annulus.e
[]
[rename]
type = RenameBlockGenerator
input = fmesh
old_block_id = '1 2 3'
new_block_id = '1 4 3'
[]
[]
[Variables]
[./temp]
block = '1 3'
initial_condition = 1.0
[../]
[]
[Kernels]
[./hc]
type = HeatConduction
variable = temp
block = '1 3'
[../]
[./source]
type = HeatSource
variable = temp
block = 3
value = 10.0
[../]
[]
[BCs]
[./outside]
type = DirichletBC
variable = temp
boundary = 1
value = 1.0
[../]
[]
[ThermalContact]
[./gap_conductivity]
type = GapHeatTransfer
variable = temp
master = 2
slave = 3
gap_conductivity = 0.5
[../]
[]
[Materials]
[./hcm]
type = HeatConductionMaterial
block = '1 3'
temp = temp
thermal_conductivity = 1
[../]
[]
[Problem]
type = FEProblem
kernel_coverage_check = false
material_coverage_check = false
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
modules/tensor_mechanics/test/tests/mohr_coulomb/uni_axial2_planar.i
# same as uni_axial2 but with planar mohr-coulomb
[Mesh]
type = FileMesh
file = quarter_hole.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[]
[BCs]
[./zmin_zzero]
type = DirichletBC
variable = disp_z
boundary = 'zmin'
value = '0'
[../]
[./xmin_xzero]
type = DirichletBC
variable = disp_x
boundary = 'xmin'
value = '0'
[../]
[./ymin_yzero]
type = DirichletBC
variable = disp_y
boundary = 'ymin'
value = '0'
[../]
[./ymax_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 'ymax'
function = '-1E-4*t'
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./mc_int]
order = CONSTANT
family = MONOMIAL
[../]
[./yield_fcn]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[../]
[./stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[../]
[./stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[../]
[./mc_int_auxk]
type = MaterialStdVectorAux
index = 0
property = plastic_internal_parameter
variable = mc_int
[../]
[./yield_fcn_auxk]
type = MaterialStdVectorAux
index = 0
property = plastic_yield_function
variable = yield_fcn
[../]
[]
[Postprocessors]
[./s_xx]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_xx
[../]
[./s_xy]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_xy
[../]
[./s_xz]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_xz
[../]
[./s_yy]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_yy
[../]
[./s_yz]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_yz
[../]
[./s_zz]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_zz
[../]
[./f]
type = PointValue
point = '0.005 0.02 0.002'
variable = yield_fcn
[../]
[]
[UserObjects]
[./coh]
type = TensorMechanicsHardeningConstant
value = 1E7
[../]
[./fric]
type = TensorMechanicsHardeningConstant
value = 2
convert_to_radians = true
[../]
[./dil]
type = TensorMechanicsHardeningConstant
value = 2
convert_to_radians = true
[../]
[./mc]
type = TensorMechanicsPlasticMohrCoulombMulti
cohesion = coh
friction_angle = fric
dilation_angle = dil
yield_function_tolerance = 1.0 # THIS IS HIGHER THAN THE SMOOTH CASE TO AVOID PRECISION-LOSS PROBLEMS!
shift = 1.0
internal_constraint_tolerance = 1E-9
use_custom_returnMap = false
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeElasticityTensor
block = 1
fill_method = symmetric_isotropic
C_ijkl = '0 5E9' # young = 10Gpa, poisson = 0.0
[../]
[./strain]
type = ComputeIncrementalSmallStrain
block = 1
displacements = 'disp_x disp_y disp_z'
[../]
[./mc]
type = ComputeMultiPlasticityStress
block = 1
ep_plastic_tolerance = 1E-9
plastic_models = mc
max_NR_iterations = 100
deactivation_scheme = 'safe'
min_stepsize = 1
max_stepsize_for_dumb = 1
debug_fspb = crash
[../]
[]
# Preconditioning and Executioner options kindly provided by Andrea
[Preconditioning]
[./andy]
type = SMP
full = true
[../]
[]
[Executioner]
end_time = 0.5
dt = 0.1
solve_type = NEWTON
type = Transient
[]
[Outputs]
file_base = uni_axial2_planar
[./exodus]
type = Exodus
hide = 'stress_xx stress_xy stress_xz stress_yy stress_yz stress_zz yield_fcn s_xx s_xy s_xz s_yy s_yz s_zz f'
[../]
[./csv]
type = CSV
interval = 1
[../]
[]
modules/combined/test/tests/thermo_mech/thermo_mech_smp.i
[GlobalParams]
temperature = temp
volumetric_locking_correction = true
[]
[Mesh]
file = cube.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[BCs]
[./bottom_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./bottom_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 10.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.0
poissons_ratio = 0.3
[../]
[./strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
eigenstrain_names = eigenstrain
[../]
[./thermal_strain]
type = ComputeThermalExpansionEigenstrain
stress_free_temperature = 0.0
thermal_expansion_coeff = 1e-5
eigenstrain_name = eigenstrain
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[./heat]
type = HeatConductionMaterial
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./density]
type = Density
density = 1.0
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-14
l_tol = 1e-3
l_max_its = 100
dt = 1.0
end_time = 1.0
[]
[Outputs]
file_base = thermo_mech_smp_out
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_jacobian_rz_smp.i
# This problem is intended to exercise the Jacobian for coupled RZ
# problems. Only two iterations should be needed.
[GlobalParams]
temperature = temp
volumetric_locking_correction = true
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_thermal_patch_rz_test.e
[]
[Functions]
[./ur]
type = ParsedFunction
value = '0'
[../]
[./uz]
type = ParsedFunction
value = '0'
[../]
[./body]
type = ParsedFunction
value = '-400/x'
[../]
[./temp]
type = ParsedFunction
value = '117.56+100*t'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./temp]
initial_condition = 117.56
[../]
[]
[Modules]
[TensorMechanics]
[Master]
displacements = 'disp_x disp_y'
[All]
displacements = 'disp_x disp_y'
add_variables = true
strain = SMALL
incremental = true
eigenstrain_names = eigenstrain
generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx'
[../]
[../]
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 1
function = ur
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 2
function = uz
[../]
[./temp]
type = FunctionDirichletBC
variable = temp
boundary = 10
function = temp
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
poissons_ratio = 0.25
[../]
[./thermal_strain]
type = ComputeThermalExpansionEigenstrain
stress_free_temperature = 117.56
thermal_expansion_coeff = 1e-6
eigenstrain_name = eigenstrain
[../]
[./stress]
type = ComputeStrainIncrementBasedStress
[../]
[./heat]
type = HeatConductionMaterial
specific_heat = 0.116
thermal_conductivity = 4.85e-4
[../]
[./density]
type = Density
density = 0.283
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-12
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 1
end_time = 1.0
[]
[Outputs]
file_base = elastic_thermal_jacobian_rz_smp_out
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_kinematic.i
# This is a benchmark test that checks constraint based frictionless
# contact using the kinematic method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/navier_stokes/test/tests/scalar_adr/supg/2d_advection_error_testing.i
ax=1
ay=1
[GlobalParams]
u = ${ax}
v = ${ay}
p = 0
tau_type = mod
transient_term = true
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
xmax = 1
ymax = 1
elem_type = QUAD9
[]
[Variables]
[./c]
family = LAGRANGE
order = SECOND
[../]
[]
[Kernels]
[./adv]
type = Advection
variable = c
forcing_func = 'ffn'
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = c
boundary = 'left right top bottom'
function = 'c_func'
[../]
[]
[Materials]
[./mat]
type = GenericConstantMaterial
prop_names = 'mu rho'
prop_values = '0 1'
[../]
[]
[Functions]
[./ffn]
type = ParsedFunction
value = '${ax}*(0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x)) + ${ay}*(0.14*pi*x*cos(0.2*pi*x*y) + 0.4*pi*cos(pi*y))'
[../]
[./c_func]
type = ParsedFunction
value = '0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5'
[../]
[./cx_func]
type = ParsedFunction
value = '0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x)'
[../]
[]
# [Executioner]
# type = Steady
# petsc_options_iname = '-pc_type -pc_factor_shift_type'
# petsc_options_value = 'lu NONZERO'
# []
[Executioner]
type = Transient
num_steps = 10
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_view'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu NONZERO superlu_dist'
line_search = 'none'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-12
nl_max_its = 10
l_tol = 1e-6
l_max_its = 10
[./TimeStepper]
dt = .05
type = IterationAdaptiveDT
cutback_factor = 0.4
growth_factor = 1.2
optimal_iterations = 20
[../]
[]
[Outputs]
[./exodus]
type = Exodus
[../]
[./csv]
type = CSV
[../]
[]
[Postprocessors]
[./L2c]
type = ElementL2Error
variable = c
function = c_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2cx]
type = ElementL2Error
variable = cx
function = cx_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
[AuxVariables]
[./cx]
family = MONOMIAL
order = FIRST
[../]
[]
[AuxKernels]
[./cx_aux]
type = VariableGradientComponent
component = x
variable = cx
gradient_variable = c
[../]
[]
test/tests/outputs/iterative/iterative_start_time.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
nonlinear_residual_dt_divisor = 100
linear_residual_dt_divisor = 100
nonlinear_residual_start_time = 1.8
linear_residual_start_time = 1.8
[../]
[]
test/tests/outputs/postprocessor/postprocessor_invalid.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[AuxVariables]
[./aux0]
order = SECOND
family = SCALAR
[../]
[./aux1]
family = SCALAR
initial_condition = 5
[../]
[./aux2]
family = SCALAR
initial_condition = 10
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./diff_v]
type = CoefDiffusion
variable = v
coef = 2
[../]
[]
[BCs]
[./right_u]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_u]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = right
value = 3
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = left
value = 2
[../]
[]
[Postprocessors]
[./num_vars]
type = NumVars
system = 'NL'
outputs = 'exodus2 console'
[../]
[./num_aux]
type = NumVars
system = 'AUX'
outputs = 'exodus'
[../]
[./num_nonlinear]
type = NumVars
system = 'NL'
outputs = 'all'
[../]
[./num_dofs]
type = NumDOFs
outputs = 'none'
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
[../]
[./exodus2]
type = Exodus
[../]
[]
[ICs]
[./aux0_IC]
variable = aux0
values = '12 13'
type = ScalarComponentIC
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/frictional_04_penalty.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.4 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 14.99999
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.4
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sm/sliding_elastic_blocks_2d_tp_sm.i
[Mesh]
file = sliding_elastic_blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
quantity = incremental_slip_x
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
quantity = incremental_slip_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip]
type = PenetrationAux
variable = accum_slip
execute_on = timestep_end
quantity = accumulated_slip
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_x]
type = PenetrationAux
variable = tang_force_x
execute_on = timestep_end
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_y]
type = PenetrationAux
variable = tang_force_y
execute_on = timestep_end
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.005
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.05
num_steps = 1000
nl_rel_tol = 1e-16
nl_abs_tol = 1e-09
dtmin = 0.01
l_tol = 1e-3
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
system = constraint
formulation = tangential_penalty
friction_coefficient = '0.25'
penalty = 1e6
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
slave = 3
master = 2
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane3_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'asm'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template2.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane2_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/frictionless_kinematic.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the kinematic method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./constitutive]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
file_base = frictionless_kinematic_out
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
formulation = kinematic
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
test/tests/restart/restart_add_variable/transient_with_stateful.i
# We run a simple problem (5 time steps and save off the solution)
# In part2, we load the solution and solve a steady problem. The test check, that the initial state in part 2 is the same as the last state from part1
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
[]
[Functions]
[./exact_fn]
type = ParsedFunction
value = t*((x*x)+(y*y))
[../]
[./forcing_fn]
type = ParsedFunction
value = -4+(x*x+y*y)
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./diffusivity]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./out_diffusivity]
type = MaterialRealAux
variable = diffusivity
property = diffusivity
[../]
[]
[Kernels]
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = MatDiffusionTest
variable = u
prop_name = diffusivity
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
[../]
[]
[Materials]
[./mat]
type = StatefulMaterial
block = 0
initial_diffusivity = 0.5
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.2
start_time = 0
num_steps = 5
[]
[Outputs]
checkpoint = true
[./out]
type = Exodus
elemental_as_nodal = true
execute_elemental_on = none
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_penalty.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = glued
formulation = penalty
penalty = 1e+7
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template1.i
[GlobalParams]
order = FIRST
family = LAGRANGE
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring1_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/phase_field/examples/multiphase/GrandPotential3Phase.i
# This is an example of implementation of the multi-phase, multi-order parameter
# grand potential based phase-field model described in Phys. Rev. E, 98, 023309
# (2019). It includes 3 phases with 1 grain of each phase. This example was used
# to generate the results shown in Fig. 3 of the paper.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 60
xmin = -15
xmax = 15
[]
[Variables]
[./w]
[../]
[./etaa0]
[../]
[./etab0]
[../]
[./etad0]
[../]
[]
[ICs]
[./IC_etaa0]
type = FunctionIC
variable = etaa0
function = ic_func_etaa0
[../]
[./IC_etab0]
type = FunctionIC
variable = etab0
function = ic_func_etab0
[../]
[./IC_etad0]
type = ConstantIC
variable = etad0
value = 0.1
[../]
[./IC_w]
type = FunctionIC
variable = w
function = ic_func_w
[../]
[]
[Functions]
[./ic_func_etaa0]
type = ParsedFunction
value = '0.9*0.5*(1.0-tanh((x)/sqrt(2.0)))'
[../]
[./ic_func_etab0]
type = ParsedFunction
value = '0.9*0.5*(1.0+tanh((x)/sqrt(2.0)))'
[../]
[./ic_func_w]
type = ParsedFunction
value = 0
[../]
[]
[Kernels]
# Order parameter eta_alpha0
[./ACa0_bulk]
type = ACGrGrMulti
variable = etaa0
v = 'etab0 etad0'
gamma_names = 'gab gad'
[../]
[./ACa0_sw]
type = ACSwitching
variable = etaa0
Fj_names = 'omegaa omegab omegad'
hj_names = 'ha hb hd'
args = 'etab0 etad0 w'
[../]
[./ACa0_int]
type = ACInterface
variable = etaa0
kappa_name = kappa
[../]
[./ea0_dot]
type = TimeDerivative
variable = etaa0
[../]
# Order parameter eta_beta0
[./ACb0_bulk]
type = ACGrGrMulti
variable = etab0
v = 'etaa0 etad0'
gamma_names = 'gab gbd'
[../]
[./ACb0_sw]
type = ACSwitching
variable = etab0
Fj_names = 'omegaa omegab omegad'
hj_names = 'ha hb hd'
args = 'etaa0 etad0 w'
[../]
[./ACb0_int]
type = ACInterface
variable = etab0
kappa_name = kappa
[../]
[./eb0_dot]
type = TimeDerivative
variable = etab0
[../]
# Order parameter eta_delta0
[./ACd0_bulk]
type = ACGrGrMulti
variable = etad0
v = 'etaa0 etab0'
gamma_names = 'gad gbd'
[../]
[./ACd0_sw]
type = ACSwitching
variable = etad0
Fj_names = 'omegaa omegab omegad'
hj_names = 'ha hb hd'
args = 'etaa0 etab0 w'
[../]
[./ACd0_int]
type = ACInterface
variable = etad0
kappa_name = kappa
[../]
[./ed0_dot]
type = TimeDerivative
variable = etad0
[../]
#Chemical potential
[./w_dot]
type = SusceptibilityTimeDerivative
variable = w
f_name = chi
args = 'etaa0 etab0 etad0'
[../]
[./Diffusion]
type = MatDiffusion
variable = w
diffusivity = Dchi
args = ''
[../]
[./coupled_etaa0dot]
type = CoupledSwitchingTimeDerivative
variable = w
v = etaa0
Fj_names = 'rhoa rhob rhod'
hj_names = 'ha hb hd'
args = 'etaa0 etab0 etad0'
[../]
[./coupled_etab0dot]
type = CoupledSwitchingTimeDerivative
variable = w
v = etab0
Fj_names = 'rhoa rhob rhod'
hj_names = 'ha hb hd'
args = 'etaa0 etab0 etad0'
[../]
[./coupled_etad0dot]
type = CoupledSwitchingTimeDerivative
variable = w
v = etad0
Fj_names = 'rhoa rhob rhod'
hj_names = 'ha hb hd'
args = 'etaa0 etab0 etad0'
[../]
[]
[Materials]
[./ha_test]
type = SwitchingFunctionMultiPhaseMaterial
h_name = ha
all_etas = 'etaa0 etab0 etad0'
phase_etas = 'etaa0'
[../]
[./hb_test]
type = SwitchingFunctionMultiPhaseMaterial
h_name = hb
all_etas = 'etaa0 etab0 etad0'
phase_etas = 'etab0'
[../]
[./hd_test]
type = SwitchingFunctionMultiPhaseMaterial
h_name = hd
all_etas = 'etaa0 etab0 etad0'
phase_etas = 'etad0'
[../]
[./omegaa]
type = DerivativeParsedMaterial
args = 'w'
f_name = omegaa
material_property_names = 'Vm ka caeq'
function = '-0.5*w^2/Vm^2/ka-w/Vm*caeq'
derivative_order = 2
[../]
[./omegab]
type = DerivativeParsedMaterial
args = 'w'
f_name = omegab
material_property_names = 'Vm kb cbeq'
function = '-0.5*w^2/Vm^2/kb-w/Vm*cbeq'
derivative_order = 2
[../]
[./omegad]
type = DerivativeParsedMaterial
args = 'w'
f_name = omegad
material_property_names = 'Vm kd cdeq'
function = '-0.5*w^2/Vm^2/kd-w/Vm*cdeq'
derivative_order = 2
[../]
[./rhoa]
type = DerivativeParsedMaterial
args = 'w'
f_name = rhoa
material_property_names = 'Vm ka caeq'
function = 'w/Vm^2/ka + caeq/Vm'
derivative_order = 2
[../]
[./rhob]
type = DerivativeParsedMaterial
args = 'w'
f_name = rhob
material_property_names = 'Vm kb cbeq'
function = 'w/Vm^2/kb + cbeq/Vm'
derivative_order = 2
[../]
[./rhod]
type = DerivativeParsedMaterial
args = 'w'
f_name = rhod
material_property_names = 'Vm kd cdeq'
function = 'w/Vm^2/kd + cdeq/Vm'
derivative_order = 2
[../]
[./c]
type = ParsedMaterial
material_property_names = 'Vm rhoa rhob rhod ha hb hd'
function = 'Vm * (ha * rhoa + hb * rhob + hd * rhod)'
f_name = c
[../]
[./const]
type = GenericConstantMaterial
prop_names = 'kappa_c kappa L D Vm ka caeq kb cbeq kd cdeq gab gad gbd mu tgrad_corr_mult'
prop_values = '0 1 1.0 1.0 1.0 10.0 0.1 10.0 0.9 10.0 0.5 1.5 1.5 1.5 1.0 0.0'
[../]
[./Mobility]
type = DerivativeParsedMaterial
f_name = Dchi
material_property_names = 'D chi'
function = 'D*chi'
derivative_order = 2
[../]
[./chi]
type = DerivativeParsedMaterial
f_name = chi
material_property_names = 'Vm ha(etaa0,etab0,etad0) ka hb(etaa0,etab0,etad0) kb hd(etaa0,etab0,etad0) kd'
function = '(ha/ka + hb/kb + hd/kd) / Vm^2'
args = 'etaa0 etab0 etad0'
derivative_order = 2
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[VectorPostprocessors]
[./etaa0]
type = LineValueSampler
variable = etaa0
start_point = '-15 0 0'
end_point = '15 0 0'
num_points = 61
sort_by = x
execute_on = 'initial timestep_end final'
[../]
[./etab0]
type = LineValueSampler
variable = etab0
start_point = '-15 0 0'
end_point = '15 0 0'
num_points = 61
sort_by = x
execute_on = 'initial timestep_end final'
[../]
[./etad0]
type = LineValueSampler
variable = etad0
start_point = '-15 0 0'
end_point = '15 0 0'
num_points = 61
sort_by = x
execute_on = 'initial timestep_end final'
[../]
[]
[Executioner]
type = Transient
nl_max_its = 15
scheme = bdf2
solve_type = PJFNK
petsc_options_iname = -pc_type
petsc_options_value = asm
l_max_its = 15
l_tol = 1.0e-3
nl_rel_tol = 1.0e-8
start_time = 0.0
num_steps = 20
nl_abs_tol = 1e-10
dt = 1.0
[]
[Outputs]
[./exodus]
type = Exodus
execute_on = 'initial timestep_end final'
interval = 1
[../]
[./csv]
type = CSV
execute_on = 'initial timestep_end final'
interval = 1
[../]
[]
modules/combined/test/tests/simple_contact/sm/simple_contact_dirac_test_sm.i
# Note: Run merged.i to generate a solution to compare to that doesn't use contact.
# This version of the test uses DiracKernel based contact
[Mesh]
file = contact.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
formulation = kinematic
system = DiracKernel
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
formulation = Nonlinear3D
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff2]
type = Elastic
formulation = Nonlinear3D
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template1_sm.i
[Mesh]
file = plane1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/solid_mechanics/test/tests/cracking/cracking_rz.i
#
# Simple pull test for cracking.
# The stress increases and then drops to zero.
#
[Mesh]
file = cracking_rz_test.e
[]
[Problem]
coord_type = RZ
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./displ]
type = PiecewiseLinear
x = '0 1 2 3 4'
y = '0 1 0 -1 0'
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
tensor = stress
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
variable = stress_yy
tensor = stress
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
tensor = stress
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
variable = stress_xy
tensor = stress
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
variable = stress_yz
tensor = stress
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
variable = stress_zx
tensor = stress
index = 5
[../]
[]
[BCs]
[./pull]
type = FunctionDirichletBC
variable = disp_x
boundary = 2
function = displ
[../]
[./left]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[]
[Materials]
[./fred]
type = Elastic
block = 1
youngs_modulus = 4.0e7 #2.8e7
poissons_ratio = 0.0 #.3
cracking_stress = 1.68e6
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101 '
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-8
nl_abs_tol = 1e-2
l_tol = 1e-5
start_time = 0.0
end_time = 0.1
dt = 0.025
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/tensor_mechanics/test/tests/anisotropic_patch/anisotropic_patch_test.i
# Patch Test
# This test is designed to compute constant xx, yy, zz, xy, yz, and zx
# stress on a set of irregular hexes. The mesh is composed of one
# block with seven elements. The elements form a unit cube with one
# internal element. There is a nodeset for each exterior node.
# The cube is displaced by 1e-6 units in x, 2e-6 in y, and 3e-6 in z.
# The faces are sheared as well (1e-6, 2e-6, and 3e-6 for xy, yz, and
# zx). This gives a uniform strain/stress state for all six unique
# tensor components.
# With Young's modulus at 1e6 and Poisson's ratio at 0, the shear
# modulus is 5e5 (G=E/2/(1+nu)). Therefore,
#
# stress xx = 1e6 * 1e-6 = 1
# stress yy = 1e6 * 2e-6 = 2
# stress zz = 1e6 * 3e-6 = 3
# stress xy = 2 * 5e5 * 1e-6 / 2 = 0.5
# (2 * G * gamma_xy / 2 = 2 * G * epsilon_xy)
# stress yz = 2 * 5e5 * 2e-6 / 2 = 1
# stress zx = 2 * 5e5 * 3e-6 / 2 = 1.5
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = '1 2 3 4 5 6 7'
[]
[Mesh]#Comment
file = anisotropic_patch_test.e
[] # Mesh
[Functions]
[./rampConstant1]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1e-6
[../]
[./rampConstant2]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 2e-6
[../]
[./rampConstant3]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 3e-6
[../]
[./rampConstant4]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 4e-6
[../]
[./rampConstant6]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 6e-6
[../]
[] # Functions
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./elastic_energy]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[Modules/TensorMechanics/Master]
[./all]
strain = SMALL
add_variables = true
generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx vonmises_stress hydrostatic_stress firstinv_stress secondinv_stress thirdinv_stress'
[../]
[]
[AuxKernels]
[./elastic_energy]
type = ElasticEnergyAux
variable = elastic_energy
[../]
[] # AuxKernels
[BCs]
[./node1_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./node1_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 1
function = rampConstant2
[../]
[./node1_z]
type = FunctionDirichletBC
variable = disp_z
boundary = 1
function = rampConstant3
[../]
[./node2_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 2
function = rampConstant1
[../]
[./node2_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 2
function = rampConstant2
[../]
[./node2_z]
type = FunctionDirichletBC
variable = disp_z
boundary = 2
function = rampConstant6
[../]
[./node3_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 3
function = rampConstant1
[../]
[./node3_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./node3_z]
type = FunctionDirichletBC
variable = disp_z
boundary = 3
function = rampConstant3
[../]
[./node4_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./node4_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./node4_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[./node5_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 5
function = rampConstant1
[../]
[./node5_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = rampConstant4
[../]
[./node5_z]
type = FunctionDirichletBC
variable = disp_z
boundary = 5
function = rampConstant3
[../]
[./node6_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 6
function = rampConstant2
[../]
[./node6_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 6
function = rampConstant4
[../]
[./node6_z]
type = FunctionDirichletBC
variable = disp_z
boundary = 6
function = rampConstant6
[../]
[./node7_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 7
function = rampConstant2
[../]
[./node7_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 7
function = rampConstant2
[../]
[./node7_z]
type = FunctionDirichletBC
variable = disp_z
boundary = 7
function = rampConstant3
[../]
[./node8_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 8
function = rampConstant1
[../]
[./node8_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 8
function = rampConstant2
[../]
[./node8_z]
type = DirichletBC
variable = disp_z
boundary = 8
value = 0.0
[../]
[] # BCs
[Materials]
[./elastic_tensor]
type = ComputeElasticityTensor
C_ijkl = '1e6 0.0 0.0 1e6 0.0 1e6 0.5e6 0.5e6 0.5e6'
fill_method = symmetric9
euler_angle_1 = 18.0
euler_angle_2 = 43.0
euler_angle_3 = 177.0
# Isotropic material constants
# The three euler angles do not matter
# youngs_modulus = 1e6
# poissons_ratio = 0.0
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[] # Materials
[Executioner]
type = Transient
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[] # Executioner
[Outputs]
file_base = anisotropic_patch_test_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
test/tests/outputs/error/none_reserved.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./none]
type = Exodus
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictionless_kinematic_sm.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the kinematic method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
formulation = kinematic
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/sm/frictional_04_penalty_sm.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.4 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.4
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/hertz_contact/hertz_contact.i
# Hertz Contact: Sphere on sphere
# Spheres have the same radius, Young's modulus, and Poisson's ratio.
# Define E:
# 1/E = (1-nu1^2)/E1 + (1-nu2^2)/E2
#
# Effective radius R:
# 1/R = 1/R1 + 1/R2
#
# F is the applied compressive load.
#
# Area of contact a::
# a^3 = 3FR/4E
#
# Depth of indentation d:
# d = a^2/R
#
#
# Let R1 = R2 = 2. Then R = 1.
#
# Let nu1 = nu2 = 0.25, E1 = E2 = 1.40625e7. Then E = 7.5e6.
#
# Let F = 10000. Then a = 0.1, d = 0.01.
#
[Mesh]#Comment
file = hertz_contact.e
displacements = 'disp_x disp_y disp_z'
[] # Mesh
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 795.77471545947674 # 10000/pi/2^2
[../]
[./disp_y]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. -0.01 -0.01'
[../]
[] # Functions
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./hydrostatic]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises
quantity = vonmises
[../]
[./hydrostatic]
type = MaterialTensorAux
tensor = stress
variable = hydrostatic
quantity = hydrostatic
[../]
[] # AuxKernels
[BCs]
[./base_x]
type = DirichletBC
variable = disp_x
boundary = 1000
value = 0.0
[../]
[./base_y]
type = DirichletBC
variable = disp_y
boundary = 1000
value = 0.0
[../]
[./base_z]
type = DirichletBC
variable = disp_z
boundary = 1000
value = 0.0
[../]
[./symm_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./symm_z]
type = DirichletBC
variable = disp_z
boundary = 3
value = 0.0
[../]
[./disp_y]
type = FunctionDirichletBC
variable = disp_y
component = 1
boundary = 2
function = disp_y
[../]
[] # BCs
[Contact]
[./dummy_name]
master = 1000
slave = 100
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
penalty = 1e7
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1.40625e7
poissons_ratio = 0.25
[../]
[./stiffStuff2] # Rigid block
type = Elastic
block = 1000
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[] # Materials
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 200
start_time = 0.0
dt = 0.5
end_time = 2.0
[] # Executioner
[Postprocessors]
[./maxdisp]
type = NodalVariableValue
nodeid = 122 # 123-1 where 123 is the exodus node number of the top-center node
variable = disp_y
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl1_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/tensor_mechanics/test/tests/gravity/ad_gravity_test.i
#
# Gravity Test
#
# This test is designed to apply a gravity body force.
#
# The mesh is composed of one block with a single element.
# The bottom is fixed in all three directions. Poisson's ratio
# is zero and the density is 20/9.81
# which makes it trivial to check displacements.
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 3
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
# [./TensorMechanics]
# [../]
[./x]
type = ADStressDivergenceTensors
variable = disp_x
component = 0
[../]
[./y]
type = ADStressDivergenceTensors
variable = disp_y
component = 1
[../]
[./z]
type = ADStressDivergenceTensors
variable = disp_z
component = 2
[../]
[./gravity_y]
type = ADGravity
variable = disp_y
value = -9.81
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = bottom
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0.0
[../]
[]
[Materials]
[./Elasticity_tensor]
type = ComputeElasticityTensor
fill_method = symmetric_isotropic
C_ijkl = '0 0.5e6'
[../]
[./strain]
type = ADComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[../]
[./stress]
type = ADComputeLinearElasticStress
[../]
[./density]
type = GenericConstantMaterial
prop_names = density
prop_values = 2.0387
[../]
[]
[Preconditioning]
[./full]
type = SMP
full = true
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
nl_abs_tol = 1e-10
l_max_its = 20
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/displacement/displacement_test.i
[Mesh]
file = square.e
displacements = 'u u'
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
active = 'diff'
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out_displaced
[./exodus]
type = Exodus
use_displaced = true
[../]
[]
modules/phase_field/test/tests/free_energy_material/RegularSolutionFreeEnergy_plog.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmax = 1
[]
[Variables]
[./c]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = x
[../]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = c
[../]
[]
[BCs]
[./left]
type = FunctionDirichletBC
variable = c
boundary = left
function = x
[../]
[./right]
type = FunctionDirichletBC
variable = c
boundary = right
function = x
[../]
[]
[Materials]
[./free_energy]
type = RegularSolutionFreeEnergy
f_name = F
c = c
outputs = out
log_tol = 0.2
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
l_max_its = 1
nl_max_its = 1
nl_abs_tol = 1
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
execute_on = timestep_end
[../]
[]
modules/richards/test/tests/buckley_leverett/bl22_lumped_fu.i
# two-phase version
# super-sharp front version
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
richardsVarNames_UO = PPNames
density_UO = 'DensityWater DensityGas'
relperm_UO = 'RelPermWater RelPermGas'
SUPG_UO = 'SUPGwater SUPGgas'
sat_UO = 'SatWater SatGas'
seff_UO = 'SeffWater SeffGas'
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-4 1E-3 1E-2 2E-2 5E-2 6E-2 0.1 0.2'
x = '0 1E-2 1E-1 1 5 20 40 41'
[../]
[]
[UserObjects]
[./PPNames]
type = RichardsVarNames
richards_vars = 'pwater pgas'
[../]
[./DensityWater]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./DensityGas]
type = RichardsDensityConstBulk
dens0 = 1
bulk_mod = 2E6
[../]
[./SeffWater]
type = RichardsSeff2waterVG
m = 0.8
al = 1E-4
[../]
[./SeffGas]
type = RichardsSeff2gasVG
m = 0.8
al = 1E-4
[../]
[./RelPermWater]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./RelPermGas]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./SatWater]
type = RichardsSat
s_res = 0.0
sum_s_res = 0.0
[../]
[./SatGas]
type = RichardsSat
s_res = 0.0
sum_s_res = 0.0
[../]
[./SUPGwater]
type = RichardsSUPGstandard
p_SUPG = 1E-5
[../]
[./SUPGgas]
type = RichardsSUPGstandard
p_SUPG = 1E-5
[../]
[]
[Variables]
[./pwater]
order = FIRST
family = LAGRANGE
[../]
[./pgas]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./Seff1VG_Aux]
[../]
[./bounds_dummy]
[../]
[]
[Kernels]
active = 'richardsfwater richardstwater richardsfgas richardstgas'
[./richardstwater]
type = RichardsLumpedMassChange
variable = pwater
[../]
[./richardsfwater]
type = RichardsFullyUpwindFlux
variable = pwater
[../]
[./richardstgas]
type = RichardsLumpedMassChange
variable = pgas
[../]
[./richardsfgas]
type = RichardsFullyUpwindFlux
variable = pgas
[../]
[./richardsppenalty]
type = RichardsPPenalty
variable = pgas
a = 1E-18
lower_var = pwater
[../]
[]
[AuxKernels]
[./Seff1VG_AuxK]
type = RichardsSeffAux
variable = Seff1VG_Aux
seff_UO = SeffWater
pressure_vars = 'pwater pgas'
[../]
[]
[Bounds]
[./pwater_bounds]
type = BoundsAux
variable = bounds_dummy
bounded_variable = pwater
upper = 1E7
lower = -110000
[../]
[]
[ICs]
[./water_ic]
type = FunctionIC
variable = pwater
function = initial_water
[../]
[./gas_ic]
type = FunctionIC
variable = pgas
function = initial_gas
[../]
[]
[BCs]
[./left_w]
type = DirichletBC
variable = pwater
boundary = left
value = 1E6
[../]
[./left_g]
type = DirichletBC
variable = pgas
boundary = left
value = 1000
[../]
[./right_w]
type = DirichletBC
variable = pwater
boundary = right
value = -100000
[../]
[./right_g]
type = DirichletBC
variable = pgas
boundary = right
value = 0
[../]
[]
[Functions]
[./initial_water]
type = ParsedFunction
value = 1000000*(1-min(x/5,1))-if(x<5,0,100000)
[../]
[./initial_gas]
type = ParsedFunction
value = 1000
[../]
[]
[Materials]
[./rock]
type = RichardsMaterial
block = 0
mat_porosity = 0.15
mat_permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
viscosity = '1E-3 1E-6'
gravity = '0 0 0'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
active = 'standard'
[./bounded]
# must use --use-petsc-dm command line argument
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type -ksp_rtol -ksp_atol'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 50 vinewtonssls 1E-20 1E-20'
[../]
[./standard]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it -ksp_rtol -ksp_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 20 1E-10 1E-100'
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 50
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = bl22_lumped_fu
[./exodus]
type = Exodus
interval = 100000
hide = 'pgas bounds_dummy'
execute_on = 'initial final timestep_end'
[../]
[]
modules/navier_stokes/test/tests/ins/RZ_cone/RZ_cone_high_reynolds.i
[GlobalParams]
gravity = '0 0 0'
laplace = true
transient_term = false
supg = true
pspg = true
family = LAGRANGE
order = FIRST
[]
[Mesh]
file = 'cone_linear_alltri.e'
[]
[Problem]
coord_type = RZ
[]
[Preconditioning]
[./SMP_PJFNK]
type = SMP
full = true
solve_type = NEWTON
[../]
[]
[Executioner]
# type = Transient
# dt = 0.005
# dtmin = 0.005
# num_steps = 5
# l_max_its = 100
# Block Jacobi works well for this problem, as does "-pc_type asm
# -pc_asm_overlap 2", but an overlap of 1 does not work for some
# reason?
# petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
# petsc_options_value = 'bjacobi ilu 4'
# Note: The Steady executioner can be used for this problem, if you
# drop the INSMomentumTimeDerivative kernels and use the following
# direct solver options.
type = Steady
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
nl_rel_tol = 1e-12
nl_max_its = 20
[]
[Outputs]
csv = true
console = true
[./out]
type = Exodus
[../]
[]
[Variables]
[./vel_x]
# Velocity in radial (r) direction
[../]
[./vel_y]
# Velocity in axial (z) direction
[../]
[./p]
order = FIRST
[../]
[]
[BCs]
[./u_in]
type = DirichletBC
boundary = bottom
variable = vel_x
value = 0
[../]
[./v_in]
type = FunctionDirichletBC
boundary = bottom
variable = vel_y
function = 'inlet_func'
[../]
[./u_axis_and_walls]
type = DirichletBC
boundary = 'left right'
variable = vel_x
value = 0
[../]
[./v_no_slip]
type = DirichletBC
boundary = 'right'
variable = vel_y
value = 0
[../]
[]
[Kernels]
# [./x_momentum_time]
# type = INSMomentumTimeDerivative
# variable = vel_x
# [../]
# [./y_momentum_time]
# type = INSMomentumTimeDerivative
# variable = vel_y
# [../]
[./mass]
type = INSMassRZ
variable = p
u = vel_x
v = vel_y
p = p
[../]
[./x_momentum_space]
type = INSMomentumLaplaceFormRZ
variable = vel_x
u = vel_x
v = vel_y
p = p
component = 0
[../]
[./y_momentum_space]
type = INSMomentumLaplaceFormRZ
variable = vel_y
u = vel_x
v = vel_y
p = p
component = 1
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 1
prop_names = 'rho mu'
prop_values = '1 1e-3'
[../]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
value = '-4 * x^2 + 1'
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template1_sm.i
[Mesh]
file = ring1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/contact/test/tests/bouncing-block-contact/tied-nodes.i
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
[]
[Mesh]
file = long-bottom-block-symmetric-single-element.e
[]
[Variables]
[./disp_x]
scaling = 2
[../]
[./disp_y]
scaling = 3
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[Constraints]
[./disp_x]
type = RANFSTieNode
slave = 10
master = 20
variable = disp_x
master_variable = disp_x
component = x
[../]
[./disp_y]
type = RANFSTieNode
slave = 10
master = 20
variable = disp_y
master_variable = disp_y
component = y
[../]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[../]
[./topy]
type = DirichletBC
variable = disp_y
boundary = 30
value = 0
[../]
[./topx]
type = DirichletBC
variable = disp_x
boundary = 30
value = 0
[../]
[]
[Executioner]
type = Transient
num_steps = 1
dtmin = 1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[exo]
type = Exodus
[]
checkpoint = true
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[]
tutorials/darcy_thermo_mech/step07_adaptivity/problems/step7d_adapt_blocks.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 40
ny = 4
xmax = 0.304 # Length of test chamber
ymax = 0.0257 # Test chamber radius
uniform_refine = 3
[]
[MeshModifiers]
[bottom]
type = SubdomainBoundingBox
location = inside
bottom_left = '0 0 0'
top_right = '0.304 0.01285 0'
block_id = 1
[]
[]
[Variables]
[pressure]
[]
[temperature]
initial_condition = 300 # Start at room temperature
[]
[]
[AuxVariables]
[velocity]
order = CONSTANT
family = MONOMIAL_VEC
[]
[]
[Kernels]
[darcy_pressure]
type = DarcyPressure
variable = pressure
[]
[heat_conduction]
type = ADHeatConduction
variable = temperature
[]
[heat_conduction_time_derivative]
type = ADHeatConductionTimeDerivative
variable = temperature
[]
[heat_convection]
type = DarcyAdvection
variable = temperature
pressure = pressure
[]
[]
[AuxKernels]
[velocity]
type = DarcyVelocity
variable = velocity
execute_on = timestep_end
pressure = pressure
[]
[]
[BCs]
[inlet]
type = DirichletBC
variable = pressure
boundary = left
value = 4000 # (Pa) From Figure 2 from paper. First data point for 1mm spheres.
[]
[outlet]
type = DirichletBC
variable = pressure
boundary = right
value = 0 # (Pa) Gives the correct pressure drop from Figure 2 for 1mm spheres
[]
[inlet_temperature]
type = FunctionDirichletBC
variable = temperature
boundary = left
function = 'if(t<0,350+50*t,350)'
[]
[outlet_temperature]
type = HeatConductionOutflow
variable = temperature
boundary = right
[]
[]
[Materials]
viscosity_file = data/water_viscosity.csv
density_file = data/water_density.csv
thermal_conductivity_file = data/water_thermal_conductivity.csv
specific_heat_file = data/water_specific_heat.csv
[column_bottom]
type = PackedColumn
block = 1
radius = 1.15
temperature = temperature
fluid_viscosity_file = ${viscosity_file}
fluid_density_file = ${density_file}
fluid_thermal_conductivity_file = ${thermal_conductivity_file}
fluid_specific_heat_file = ${specific_heat_file}
[]
[column_top]
type = PackedColumn
block = 0
radius = 1
temperature = temperature
porosity = '0.25952 + 0.7*x/0.304'
fluid_viscosity_file = ${viscosity_file}
fluid_density_file = ${density_file}
fluid_thermal_conductivity_file = ${thermal_conductivity_file}
fluid_specific_heat_file = ${specific_heat_file}
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
rz_coord_axis = X
[]
[Executioner]
type = Transient
solve_type = NEWTON
automatic_scaling = true
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
end_time = 100
dt = 0.25
start_time = -1
steady_state_tolerance = 1e-5
steady_state_detection = true
[TimeStepper]
type = FunctionDT
function = 'if(t<0,0.1,0.25)'
[]
[]
[Adaptivity]
marker = error_frac
max_h_level = 3
[Indicators]
[temperature_jump]
type = GradientJumpIndicator
variable = temperature
scale_by_flux_faces = true
[]
[]
[Markers]
[error_frac]
type = ErrorFractionMarker
coarsen = 0.025
indicator = temperature_jump
refine = 0.9
[]
[]
[]
[Outputs]
[out]
type = Exodus
output_material_properties = true
[]
[]
examples/ex02_kernel/ex02_oversample.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
nz = 0
zmax = 0
elem_type = QUAD9
[]
[Variables]
[./diffused]
order = SECOND
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = diffused
[../]
[]
[DiracKernels]
[./foo]
variable = diffused
type = ConstantPointSource
value = 1
point = '0.3 0.3 0.0'
[../]
[]
[BCs]
[./all]
type = DirichletBC
variable = diffused
boundary = 'bottom left right top'
value = 0.0
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./refine_2]
type = Exodus
file_base = oversample_2
refinements = 2
[../]
[./refine_4]
type = Exodus
file_base = oversample_4
refinements = 4
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick1_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/phase_field/test/tests/free_energy_material/RegularSolutionFreeEnergy_const_T.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmax = 1
[]
[Variables]
[./c]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = x
[../]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = c
[../]
[]
[BCs]
[./left]
type = FunctionDirichletBC
variable = c
boundary = left
function = x
[../]
[./right]
type = FunctionDirichletBC
variable = c
boundary = right
function = x
[../]
[]
[Materials]
[./free_energy]
type = RegularSolutionFreeEnergy
f_name = F
c = c
outputs = out
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
l_max_its = 1
nl_max_its = 1
nl_abs_tol = 1
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
execute_on = timestep_end
[../]
[]
modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q8/hertz_cyl_half_1deg_template3.i
[GlobalParams]
order = SECOND
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Mesh]
file = hertz_cyl_half_1deg.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 11.'
y = '0. -0.0020 -0.0020'
[../]
[./disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 11.'
y = '0. 0.0 0.0014'
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./disp_x639]
type = NodalVariableValue
nodeid = 638
variable = disp_x
[../]
[./disp_y639]
type = NodalVariableValue
nodeid = 638
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[../]
[./top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[../]
[./top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[../]
[]
[Materials]
[./stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[../]
[./stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff2_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[./stuff3_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '3'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff3_strain]
type = ComputeFiniteStrain
block = '3'
[../]
[./stuff3_stress]
type = ComputeFiniteStrainElasticStress
block = '3'
[../]
[./stuff4_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '4'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff4_strain]
type = ComputeFiniteStrain
block = '4'
[../]
[./stuff4_stress]
type = ComputeFiniteStrainElasticStress
block = '4'
[../]
[./stuff5_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '5'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff5_strain]
type = ComputeFiniteStrain
block = '5'
[../]
[./stuff5_stress]
type = ComputeFiniteStrainElasticStress
block = '5'
[../]
[./stuff6_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '6'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff6_strain]
type = ComputeFiniteStrain
block = '6'
[../]
[./stuff6_stress]
type = ComputeFiniteStrainElasticStress
block = '6'
[../]
[./stuff7_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff7_strain]
type = ComputeFiniteStrain
block = '7'
[../]
[./stuff7_stress]
type = ComputeFiniteStrainElasticStress
block = '7'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 200
start_time = 0.0
end_time = 2.0
l_tol = 5e-4
dt = 0.1
dtmin = 0.1
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'x_disp y_disp cont_press'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./chkfile2]
type = CSV
show = 'bot_react_x bot_react_y disp_x639 disp_y639 top_react_x top_react_y'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./interface]
master = 2
slave = 3
model = coulomb
friction_coefficient = 0.0
system = constraint
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
master = '2'
slave = '3'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template1.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl3_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template1.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl2_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_template2_sm.i
[Mesh]
file = ring1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/evolving_mass_density/uniform_expand_compress_test_tensors.i
# Element mass tests
# This series of tests is designed to compute the mass of elements based on
# an evolving mass density calculation. The tests consist of expansion and compression
# of the elastic patch test model along each axis, uniform expansion and compression,
# and shear in each direction. The expansion and compression tests change the volume of
# the elements. The corresponding change in density should compensate for this so the
# mass remains constant. The shear tests should not result in a volume change, and this
# is checked too. The mass calculation is done with the post processor called Mass.
# The tests/file names are as follows:
# Expansion and compression along a single axis
# expand_compress_x_test_out.e
# expand_compress_y_test_out.e
# expand_compress_z_test_out.e
# Volumetric expansion and compression
# uniform_expand_compress_test.i
# Zero volume change shear along each axis
# shear_x_test_out.e
# shear_y_test_out.e
# shear_z_test_out.e
# The resulting mass calculation for these tests should always be = 1.
# This test is a duplicate of the uniform_expand_compress_test.i test for solid mechanics, and the
# output of this tensor mechanics test is compared to the original
# solid mechanics output. The duplication is necessary to test the
# migrated tensor mechanics version while maintaining tests for solid mechanics.
[Mesh]
file = elastic_patch.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./rampConstant2]
type = PiecewiseLinear
x = '0.00 1.00 2.0 3.00'
y = '0.00 0.25 0.0 -0.25'
scale_factor = 1
[../]
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./TensorMechanics]
[../]
[]
[BCs]
[./9_y]
type = DirichletBC
variable = disp_y
boundary = 9
value = 0
[../]
[./10_y]
type = DirichletBC
variable = disp_x
boundary = 10
value = 0
[../]
[./14_y]
type = DirichletBC
variable = disp_z
boundary = 14
value = 0
[../]
[./top]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = 11
function = rampConstant2
[../]
[./front]
type = FunctionDirichletBC
variable = disp_z
preset = false
boundary = 13
function = rampConstant2
[../]
[./side]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = 12
function = rampConstant2
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = '1 2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[./small_strain]
type = ComputeSmallStrain
block = ' 1 2 3 4 5 6 7'
[../]
[./elastic_stress]
type = ComputeLinearElasticStress
block = '1 2 3 4 5 6 7'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 3
end_time =3.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
file_base = uniform_expand_compress_test_out
[../]
[]
[Postprocessors]
[./Mass]
type = Mass
variable = disp_x
execute_on = 'initial timestep_end'
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/frictional_02_penalty.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0.2 is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./constitutive]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
file_base = frictional_02_penalty_out
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.2
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/power_law_hardening/PowerLawHardening.i
# This is a test of the isotropic power law hardening constitutive model.
# In this problem, a single Hex 8 element is fixed at the bottom and pulled at the top
# at a constant rate of 0.1.
# Before yield, stress = strain (=0.1*t) as youngs modulus is 1.0.
# The yield stress for this problem is 0.25 ( as strength coefficient is 0.5 and strain rate exponent is 0.5).
# Therefore, the material should start yielding at t = 2.5 seconds and then follow stress = K *pow(strain,n) or
# stress ~ 0.5*pow(0.1*t,0.5).
#
# This tensor mechanics version of the power law hardening plasticity model matches
# the solid mechanics version for this toy problem under exodiff limits
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[Mesh]
type = GeneratedMesh
dim = 3
[]
[AuxVariables]
[./total_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(0.1)
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = SMALL
incremental = true
generate_output = 'stress_yy'
[]
[]
[AuxKernels]
[./total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = left
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = back
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1.0
poissons_ratio = 0.3
[../]
[./power_law_hardening]
type = IsotropicPowerLawHardeningStressUpdate
strength_coefficient = 0.5 #K
strain_hardening_exponent = 0.5 #n
[../]
[./radial_return_stress]
type = ComputeMultipleInelasticStress
inelastic_models = 'power_law_hardening'
tangent_operator = elastic
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-ksp_snes_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = '201 hypre boomeramg 4'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
end_time = 5.0
dt = 0.25
[]
[Postprocessors]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./strain_yy]
type = ElementAverageValue
variable = total_strain_yy
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_mu_0_2_pen_sm.i
[Mesh]
file = cyl2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/hertz_cyl/quart_symm_q4/hertz_cyl_qsym_1deg_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = hertz_cyl_qsym_1deg_q4.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. -0.0020 -0.0020'
[../]
[./disp_ramp_zero]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0.0 0.0'
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 4
paired_boundary = 3
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./disp_x281]
type = NodalVariableValue
nodeid = 280
variable = disp_x
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./side_x]
type = DirichletBC
variable = disp_y
boundary = '1 3'
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2 3'
value = 0.0
[../]
[./top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = disp_ramp_vert
[../]
[]
[Materials]
[./stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[../]
[./stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff2_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[./stuff3_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '3'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff3_strain]
type = ComputeFiniteStrain
block = '3'
[../]
[./stuff3_stress]
type = ComputeFiniteStrainElasticStress
block = '3'
[../]
[./stuff4_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '4'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff4_strain]
type = ComputeFiniteStrain
block = '4'
[../]
[./stuff4_stress]
type = ComputeFiniteStrainElasticStress
block = '4'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-6
nl_rel_tol = 1e-5
l_max_its = 50
nl_max_its = 100
start_time = 0.0
dt = 0.1
dtmin = 0.1
num_steps = 10
end_time = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '4'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x281 top_react_x top_react_y x_disp y_disp cont_press'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./interface]
master = 3
slave = 4
system = constraint
model = glued
formulation = kinematic
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/vectorpostprocessors/line_material_sampler/line_material_real_sampler.i
[Mesh]
type = GeneratedMesh
parallel_type = replicated # Until RayTracing.C is fixed
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 4
ny = 4
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./mat]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./diff]
type = MatDiffusionTest
variable = u
prop_name = matp
[../]
[]
[AuxKernels]
[./mat]
type = MaterialRealAux
variable = mat
property = matp
execute_on = timestep_end
[../]
[]
[VectorPostprocessors]
[./mat]
type = LineMaterialRealSampler
start = '0.125 0.375 0.0'
end = '0.875 0.375 0.0'
property = matp
sort_by = id
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 1
[../]
[./right]
type = MTBC
variable = u
boundary = 1
grad = 8
prop_name = matp
[../]
[]
[Materials]
[./mat]
type = MTMaterial
block = 0
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
file_base = out
csv = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template2_sm.i
[Mesh]
file = brick4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x59]
type = NodalVariableValue
nodeid = 58
variable = disp_x
[../]
[./disp_x64]
type = NodalVariableValue
nodeid = 63
variable = disp_x
[../]
[./disp_y59]
type = NodalVariableValue
nodeid = 58
variable = disp_y
[../]
[./disp_y64]
type = NodalVariableValue
nodeid = 63
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x59 disp_y59 disp_x64 disp_y64 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/porous_flow/test/tests/flux_limited_TVD_advection/fltvd_2D_angle.i
# Using Flux-Limited TVD Advection ala Kuzmin and Turek, with antidiffusion from superbee flux limiting
# 2D version with velocity = (0.1, 0.2, 0)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
xmin = 0
xmax = 1
ny = 10
ymin = 0
ymax = 1
[]
[Variables]
[./tracer]
[../]
[]
[ICs]
[./tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1 | x > 0.3 | y < 0.1 | y > 0.3, 0, 1)'
[../]
[]
[Kernels]
[./mass_dot]
type = MassLumpedTimeDerivative
variable = tracer
[../]
[./flux]
type = FluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = fluo
[../]
[]
[UserObjects]
[./fluo]
type = AdvectiveFluxCalculatorConstantVelocity
flux_limiter_type = superbee
u = tracer
velocity = '0.1 0.2 0'
[../]
[]
[BCs]
[./no_tracer_on_left]
type = DirichletBC
variable = tracer
value = 0
boundary = left
[../]
[./remove_tracer]
# Ideally, an OutflowBC would be used, but that does not exist in the framework
# In 1D VacuumBC is the same as OutflowBC, with the alpha parameter being twice the velocity
type = VacuumBC
boundary = right
alpha = 0.2 # 2 * velocity
variable = tracer
[../]
[]
[Preconditioning]
active = basic
[./basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[../]
[./preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 2
dt = 0.1
[]
[Outputs]
print_linear_residuals = false
[./out]
type = Exodus
execute_on = 'initial final'
[../]
[]
modules/navier_stokes/test/tests/ins/velocity_channel/velocity_inletBC_by_parts.i
# This input file tests outflow boundary conditions for the incompressible NS equations.
[GlobalParams]
gravity = '0 0 0'
integrate_p_by_parts = true
[]
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 3.0
ymin = 0
ymax = 1.0
nx = 30
ny = 10
elem_type = QUAD9
[]
[Variables]
[./vel_x]
order = SECOND
family = LAGRANGE
[../]
[./vel_y]
order = SECOND
family = LAGRANGE
[../]
[./p]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./mass]
type = INSMass
variable = p
u = vel_x
v = vel_y
p = p
[../]
[./x_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_x
u = vel_x
v = vel_y
p = p
component = 0
[../]
[./y_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_y
u = vel_x
v = vel_y
p = p
component = 1
[../]
[]
[BCs]
[./x_no_slip]
type = DirichletBC
variable = vel_x
boundary = 'top bottom'
value = 0.0
[../]
[./y_no_slip]
type = DirichletBC
variable = vel_y
boundary = 'left top bottom'
value = 0.0
[../]
[./x_inlet]
type = FunctionDirichletBC
variable = vel_x
boundary = 'left'
function = 'inlet_func'
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 0
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[]
[Preconditioning]
[./SMP_PJFNK]
type = SMP
full = true
solve_type = NEWTON
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-ksp_gmres_restart -pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = '300 bjacobi ilu 4'
line_search = none
nl_rel_tol = 1e-12
nl_max_its = 6
l_tol = 1e-6
l_max_its = 300
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
value = '-4 * (y - 0.5)^2 + 1'
[../]
[]
test/tests/transfers/multiapp_projection_transfer/tosub_sub.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 3
ymin = 0
ymax = 3
nx = 3
ny = 3
[]
[Variables]
[./v]
[../]
[]
[AuxVariables]
[./u_nodal]
[../]
[./u_elemental]
order = CONSTANT
family = MONOMIAL
[../]
[./x_elemental]
order = CONSTANT
family = MONOMIAL
[../]
[./x_nodal]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = v
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = v
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = v
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 1
dt = 1
solve_type = 'NEWTON'
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/oversample/ex02_oversample.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
nz = 0
zmax = 0
elem_type = QUAD9
[]
[Variables]
[./diffused]
order = SECOND
[../]
[]
[Kernels]
active = 'diff'
[./diff]
type = Diffusion
variable = diffused
[../]
[]
[DiracKernels]
[./foo]
variable = diffused
type = ConstantPointSource
value = 1
point = '0.3 0.3 0.0'
[../]
[]
[BCs]
active = 'all'
[./all]
type = DirichletBC
variable = diffused
boundary = 'bottom left right top'
value = 0.0
[../]
[]
[Executioner]
type = Steady
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./os2]
type = Exodus
refinements = 2
[../]
[./os4]
type = Exodus
refinements = 4
[../]
[]
modules/richards/test/tests/buckley_leverett/bl22.i
# two-phase version
# super-sharp front version
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
richardsVarNames_UO = PPNames
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-4 1E-3 1E-2 2E-2 5E-2 6E-2 0.1 0.2'
x = '0 1E-2 1E-1 1 5 20 40 41'
[../]
[]
[UserObjects]
[./PPNames]
type = RichardsVarNames
richards_vars = 'pwater pgas'
[../]
[./DensityWater]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./DensityGas]
type = RichardsDensityConstBulk
dens0 = 1
bulk_mod = 2E6
[../]
[./SeffWater]
type = RichardsSeff2waterVG
m = 0.8
al = 1E-4
[../]
[./SeffGas]
type = RichardsSeff2gasVG
m = 0.8
al = 1E-4
[../]
[./RelPermWater]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./RelPermGas]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./SatWater]
type = RichardsSat
s_res = 0.0
sum_s_res = 0.0
[../]
[./SatGas]
type = RichardsSat
s_res = 0.0
sum_s_res = 0.0
[../]
[./SUPGwater]
type = RichardsSUPGstandard
p_SUPG = 1E-5
[../]
[./SUPGgas]
type = RichardsSUPGstandard
p_SUPG = 1E-5
[../]
[]
[Variables]
[./pwater]
order = FIRST
family = LAGRANGE
[../]
[./pgas]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./Seff1VG_Aux]
[../]
[./bounds_dummy]
[../]
[]
[Kernels]
active = 'richardsfwater richardstwater richardsfgas richardstgas'
[./richardstwater]
type = RichardsMassChange
variable = pwater
[../]
[./richardsfwater]
type = RichardsFlux
variable = pwater
[../]
[./richardstgas]
type = RichardsMassChange
variable = pgas
[../]
[./richardsfgas]
type = RichardsFlux
variable = pgas
[../]
[./richardsppenalty]
type = RichardsPPenalty
variable = pgas
a = 1E-18
lower_var = pwater
[../]
[]
[AuxKernels]
[./Seff1VG_AuxK]
type = RichardsSeffAux
variable = Seff1VG_Aux
seff_UO = SeffWater
pressure_vars = 'pwater pgas'
[../]
[]
[Bounds]
[./pwater_bounds]
type = BoundsAux
variable = bounds_dummy
bounded_variable = pwater
upper = 1E7
lower = -110000
[../]
[]
[ICs]
[./water_ic]
type = FunctionIC
variable = pwater
function = initial_water
[../]
[./gas_ic]
type = FunctionIC
variable = pgas
function = initial_gas
[../]
[]
[BCs]
[./left_w]
type = DirichletBC
variable = pwater
boundary = left
value = 1E6
[../]
[./left_g]
type = DirichletBC
variable = pgas
boundary = left
value = 1E6
[../]
[./right_w]
type = DirichletBC
variable = pwater
boundary = right
value = -100000
[../]
[./right_g]
type = DirichletBC
variable = pgas
boundary = right
value = 0
[../]
[]
[Functions]
[./initial_water]
type = ParsedFunction
value = 1000000*(1-min(x/5,1))-100000*(max(x-5,0)/max(abs(x-5),1E-10))
[../]
[./initial_gas]
type = ParsedFunction
value = max(1000000*(1-x/5),0)+1000
[../]
[]
[Materials]
[./rock]
type = RichardsMaterial
block = 0
mat_porosity = 0.15
mat_permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
density_UO = 'DensityWater DensityGas'
relperm_UO = 'RelPermWater RelPermGas'
SUPG_UO = 'SUPGwater SUPGgas'
sat_UO = 'SatWater SatGas'
seff_UO = 'SeffWater SeffGas'
viscosity = '1E-3 1E-6'
gravity = '0 0 0'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
active = 'standard'
[./bounded]
# must use --use-petsc-dm command line argument
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type -ksp_rtol -ksp_atol'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 50 vinewtonssls 1E-20 1E-20'
[../]
[./standard]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_rtol -ksp_atol'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 20 1E-20 1E-20'
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 50
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = bl22
[./exodus]
type = Exodus
interval = 100000
hide = pgas
execute_on = 'initial final timestep_end'
[../]
[]
test/tests/outputs/exodus/variable_toggles.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[AuxVariables]
[./aux0]
order = SECOND
family = SCALAR
[../]
[./aux1]
family = SCALAR
initial_condition = 5
[../]
[./aux2]
family = SCALAR
initial_condition = 10
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./diff_v]
type = CoefDiffusion
variable = v
coef = 2
[../]
[]
[BCs]
[./right_u]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_u]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = right
value = 3
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = left
value = 2
[../]
[]
[Postprocessors]
[./num_vars]
type = NumVars
system = 'NL'
[../]
[./num_aux]
type = NumVars
system = 'AUX'
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
[../]
[]
[ICs]
[./aux0_IC]
variable = aux0
values = '12 13'
type = ScalarComponentIC
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictional_04_penalty.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0.4 is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./left_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-3
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
# csv = true
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.4
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring2_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring3_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/phase_field/test/tests/phase_field_kernels/CahnHilliard.i
#
# Test the non-split parsed function free enery Cahn-Hilliard Bulk kernel
# The free energy used here has the same functional form as the CHPoly kernel
# If everything works, the output of this test should replicate the output
# of marmot/tests/chpoly_test/CHPoly_test.i (exodiff match)
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 16
ny = 16
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./cv]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./InitialCondition]
type = CrossIC
x1 = 5.0
y1 = 5.0
x2 = 45.0
y2 = 45.0
variable = cv
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = cv
[../]
[./CHSolid]
type = CahnHilliard
variable = cv
f_name = F
mob_name = M
[../]
[./CHInterface]
type = CHInterface
variable = cv
mob_name = M
kappa_name = kappa_c
[../]
[]
[Materials]
[./consts]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1 0.1'
[../]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'cv'
function = '(1-cv)^2 * (1+cv)^2'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 15
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-11
start_time = 0.0
num_steps = 2
dt = 0.7
[]
[Outputs]
[./out]
type = Exodus
refinements = 1
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template2_sm.i
[Mesh]
file = ring2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/frictionless_kinematic.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the kinematic method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[] # Materials
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 4 101'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 200
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
formulation = kinematic
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/solid_mechanics/test/tests/cracking/cracking_function.i
#
# Simple pull test for cracking.
#
#
[Mesh]
file = plate.e
displacements = 'disp_x disp_y'
# This test uses ElementalVariableValue postprocessors on specific
# elements, so element numbering needs to stay unchanged
allow_renumbering = false
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./crack_xx_flags]
order = CONSTANT
family = MONOMIAL
[../]
[./crack_yy_flags]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./displ]
type = PiecewiseLinear
x = '0 0.1 0.2 0.3 0.4'
y = '0 0.001 0 -0.001 0'
[../]
[./pressure]
type = PiecewiseLinear
x = '0 0.4'
y = '1.0e5 1.0e5'
[../]
[./fstress]
type = ParsedFunction
value = 'if(x > 0.667, 1.1e6, 0) + if(x<=0.667, 1.2e6, 0)'
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./crack_xx_flags]
type = MaterialRealVectorValueAux
property = crack_flags
variable = crack_xx_flags
component = 0
block = 1
[../]
[./crack_yy_flags]
type = MaterialRealVectorValueAux
property = crack_flags
variable = crack_yy_flags
component = 1
block = 1
[../]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
tensor = stress
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
variable = stress_yy
tensor = stress
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
tensor = stress
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
variable = stress_xy
tensor = stress
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
variable = stress_yz
tensor = stress
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
variable = stress_zx
tensor = stress
index = 5
[../]
[./strain_xx]
type = MaterialTensorAux
variable = strain_xx
tensor = total_strain
index = 0
[../]
[./strain_yy]
type = MaterialTensorAux
variable = strain_yy
tensor = total_strain
index = 1
[../]
[./strain_zz]
type = MaterialTensorAux
variable = strain_zz
tensor = total_strain
index = 2
[../]
[./strain_xy]
type = MaterialTensorAux
variable = strain_xy
tensor = total_strain
index = 3
[../]
[./strain_yz]
type = MaterialTensorAux
variable = strain_yz
tensor = total_strain
index = 4
[../]
[./strain_zx]
type = MaterialTensorAux
variable = strain_zx
tensor = total_strain
index = 5
[../]
[]
[BCs]
[./pull]
type = FunctionDirichletBC
variable = disp_x
boundary = '3 4'
function = displ
[../]
[./pin_x]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0
[../]
[./pin_y]
type = DirichletBC
variable = disp_y
boundary = '1 4'
value = 0.0
[../]
[]
[Materials]
[./SolidModel]
type = Elastic
block = 1
youngs_modulus = 200.0e7
poissons_ratio = 0.0 #.3
cracking_stress_function = fstress
cracking_stress = 1.2e6
cracking_residual_stress = 0.0
disp_x = disp_x
disp_y = disp_y
[../]
[]
[Postprocessors]
[./elem_stress_xx]
type = ElementalVariableValue
variable = stress_xx
elementid = 0
[../]
[./elem_strain_xx]
type = ElementalVariableValue
variable = strain_xx
elementid = 0
[../]
[./elem_crack_flags_x]
type = ElementalVariableValue
variable = crack_xx_flags
elementid = 0
[../]
[./elem_crack_flags_y]
type = ElementalVariableValue
variable = crack_yy_flags
elementid = 0
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101 '
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-8
nl_abs_tol = 1e-6
l_tol = 1e-5
start_time = 0.0
end_time = 0.2
dt = 0.0025
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
csv = true
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template1_sm.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[Mesh]
file = cyl1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/outputs/displaced/non_displaced_fallback.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2
[]
[AuxVariables]
[./a]
[../]
[]
[AuxKernels]
[./a_ak]
type = ConstantAux
variable = a
value = 1.
execute_on = initial
[../]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Outputs]
[./exodus]
type = Exodus
use_displaced = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_mu_0_2_pen_sm.i
[Mesh]
file = brick2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+7
[../]
[]
test/tests/outputs/output_interface/indicator.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Adaptivity]
[./Indicators]
[./indicator_0]
type = GradientJumpIndicator
variable = u
outputs = indicators
[../]
[./indicator_1]
type = GradientJumpIndicator
variable = u
outputs = indicators
[../]
[../]
[]
[Outputs]
[./indicators]
type = Exodus
[../]
[./no_indicators]
type = Exodus
[../]
[]
test/tests/mesh/adapt/displaced_adapt_test.i
# Adaptivity on displaced problem
# - testing initial_refinement and adaptivity as well
#
# variables:
# - u and v_aux are used for displacing the problem
# - v is used to get some refinements
#
[Mesh]
dim = 2
file = square.e
uniform_refine = 3
displacements = 'u aux_v'
[]
[Functions]
[./aux_v_fn]
type = ParsedFunction
value = x*(y-0.5)/5
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
active = 'udiff uie vdiff vconv vie'
[./udiff]
type = Diffusion
variable = u
[../]
[./uie]
type = TimeDerivative
variable = u
[../]
[./vdiff]
type = Diffusion
variable = v
[../]
[./vconv]
type = Convection
variable = v
velocity = '-10 1 0'
[../]
[./vie]
type = TimeDerivative
variable = v
[../]
[]
[BCs]
active = 'uleft uright vleft vright'
[./uleft]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./uright]
type = DirichletBC
variable = u
boundary = 2
value = 0.1
[../]
[./vleft]
type = DirichletBC
variable = v
boundary = 1
value = 1
[../]
[./vright]
type = DirichletBC
variable = v
boundary = 2
value = 0
[../]
[]
[AuxVariables]
[./aux_v]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxKernels]
[./aux_k_1]
type = FunctionAux
variable = aux_v
function = aux_v_fn
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 2
dt = .1
[./Adaptivity]
refine_fraction = 0.2
coarsen_fraction = 0.3
max_h_level = 4
[../]
[]
[Outputs]
exodus = true
[./displaced]
type = Exodus
use_displaced = true
[../]
[]
modules/phase_field/test/tests/initial_conditions/SmoothCircleIC.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = SmoothCircleIC
variable = c
x1 = 25.0
y1 = 25.0
radius = 6.0
invalue = 1.0
outvalue = -0.8
int_width = 4.0
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CHMath
variable = c
mob_name = M
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-4
nl_max_its = 40
nl_rel_tol = 1e-9
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
exodus = false
[./out]
type = Exodus
refinements = 2
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_mu_0_2_pen_sm.i
[Mesh]
file = ring2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/restart/restart_add_variable/add_variable_restart.i
# Use the exodus file for restarting the problem:
# - restart one variable
# - and have one extra variable
# - have PBP active to have more system in Equation system
#
[Mesh]
file = transient_with_stateful_out.e
[]
[Functions]
[./exact_fn]
type = ParsedFunction
value = t*((x*x)+(y*y))
[../]
[./forcing_fn]
type = ParsedFunction
value = -4+(x*x+y*y)
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./diffusivity]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./out_diffusivity]
type = MaterialRealAux
variable = diffusivity
property = diffusivity
[../]
[]
[Kernels]
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = MatDiffusionTest
variable = u
prop_name = diffusivity
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[./diff_v]
type = Diffusion
variable = v
[../]
[]
[Materials]
[./mat]
type = StatefulMaterial
block = 0
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = '3'
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = '1'
value = 1
[../]
[]
[Preconditioning]
[./PBP]
type = PBP
solve_order = 'u v'
preconditioner = 'AMG AMG'
[../]
[]
[Executioner]
type = Transient
solve_type = JFNK
dt = 0.1
reset_dt = true #NECESSARY to force a change in DT when using restart!
num_steps = 3
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
execute_elemental_on = none
[../]
[]
[Problem]
restart_file_base = transient_with_stateful_out_cp/LATEST
[]
test/tests/outputs/misc/default_names.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[./oversample]
type = Exodus
refinements = 1
[../]
[]
modules/navier_stokes/test/tests/ins/RZ_cone/RZ_cone_by_parts.i
# This input file tests several different things:
# .) The axisymmetric (RZ) form of the governing equations.
# .) An open boundary.
# .) Integrating the pressure by parts.
# .) Natural boundary condition at the outlet.
[GlobalParams]
gravity = '0 0 0'
[]
[Mesh]
file = '2d_cone.msh'
[]
[Problem]
coord_type = RZ
[]
[Preconditioning]
[./SMP_PJFNK]
type = SMP
full = true
solve_type = Newton
[../]
[]
[Executioner]
type = Transient
dt = 0.005
dtmin = 0.005
num_steps = 5
l_max_its = 100
# Note: The Steady executioner can be used for this problem, if you
# drop the INSMomentumTimeDerivative kernels and use the following
# direct solver options.
# petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -ksp_type'
# petsc_options_value = 'lu NONZERO 1.e-10 preonly'
# Block Jacobi works well for this problem, as does "-pc_type asm
# -pc_asm_overlap 2", but an overlap of 1 does not work for some
# reason?
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'bjacobi ilu 4'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
csv = true
console = true
[./out]
type = Exodus
[../]
[]
[Variables]
[./vel_x]
# Velocity in radial (r) direction
family = LAGRANGE
order = SECOND
[../]
[./vel_y]
# Velocity in axial (z) direction
family = LAGRANGE
order = SECOND
[../]
[./p]
family = LAGRANGE
order = FIRST
[../]
[]
[BCs]
[./u_in]
type = DirichletBC
boundary = bottom
variable = vel_x
value = 0
[../]
[./v_in]
type = FunctionDirichletBC
boundary = bottom
variable = vel_y
function = 'inlet_func'
[../]
[./u_axis_and_walls]
type = DirichletBC
boundary = 'left right'
variable = vel_x
value = 0
[../]
[./v_no_slip]
type = DirichletBC
boundary = 'right'
variable = vel_y
value = 0
[../]
[]
[Kernels]
[./x_momentum_time]
type = INSMomentumTimeDerivative
variable = vel_x
[../]
[./y_momentum_time]
type = INSMomentumTimeDerivative
variable = vel_y
[../]
[./mass]
type = INSMassRZ
variable = p
u = vel_x
v = vel_y
p = p
[../]
[./x_momentum_space]
type = INSMomentumLaplaceFormRZ
variable = vel_x
u = vel_x
v = vel_y
p = p
component = 0
[../]
[./y_momentum_space]
type = INSMomentumLaplaceFormRZ
variable = vel_y
u = vel_x
v = vel_y
p = p
component = 1
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 'volume'
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
value = '-4 * x^2 + 1'
[../]
[]
[Postprocessors]
[./flow_in]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'bottom'
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./flow_out]
type = VolumetricFlowRate
vel_x = vel_x
vel_y = vel_y
boundary = 'top'
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
test/tests/postprocessors/side_pps/side_pps_multi_bnd_test.i
#
# Tests elemental PPS running on multiple blocks
#
[Mesh]
type = StripeMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 3
ny = 3
elem_type = QUAD4
stripes = 3
# StripeMesh currently only works correctly with ReplicatedMesh.
parallel_type = replicated
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = x*(y+1)
[../]
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Kernels]
[./uv]
type = Reaction
variable = u
[../]
[./fv]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[Postprocessors]
[./int_0_1]
type = SideIntegralVariablePostprocessor
variable = u
boundary = '0 1'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_penalty_dirac.i
# This is a dirac (contact formulation) version of glued_penalty.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = glued
formulation = penalty
penalty = 1e+7
system = diracKernel
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane4_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl4_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/sm/frictionless_penalty_sm.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template1.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl1_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/outputs/iterative/output_step_window.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
start_step = 2
end_step = 5
[../]
[]
modules/contact/test/tests/bouncing-block-contact/grid-sequencing/grid-sequencing.i
starting_point = 2e-1
# We offset slightly so we avoid the case where the bottom of the slave block and the top of the
# master block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarsest mesh (basic line search handles that fine)
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
[]
[Mesh]
file = level0.e
[]
[Variables]
[./disp_x]
block = '1 2'
[../]
[./disp_y]
block = '1 2'
[../]
[./normal_lm]
block = 3
[../]
[./tangential_lm]
block = 3
family = MONOMIAL
order = CONSTANT
[../]
[]
[ICs]
[./disp_y]
block = 2
variable = disp_y
value = ${fparse starting_point + offset}
type = ConstantIC
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[Constraints]
[normal_lm]
type = NormalNodalLMMechanicalContact
slave = 10
master = 20
variable = normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
[../]
[normal_x]
type = NormalMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[normal_y]
type = NormalMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_lm]
type = TangentialMortarLMMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = tangential_lm
slave_variable = disp_x
slave_disp_y = disp_y
use_displaced_mesh = true
compute_primal_residuals = false
contact_pressure = normal_lm
friction_coefficient = .1
ncp_function_type = fb
[]
[tangential_x]
type = TangentialMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = tangential_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_y]
type = TangentialMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = tangential_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[../]
[./leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[../]
[]
[Executioner]
type = Transient
end_time = 200
num_steps = 3
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
nl_abs_tol = 1e-10
num_grids = 5
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[exo]
type = Exodus
sync_times = '15'
sync_only = true
[]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_jacobian_rz_smp_sm.i
# This problem is intended to exercise the Jacobian for coupled RZ
# problems. Only two iterations should be needed.
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_thermal_patch_rz_test.e
[]
[Functions]
[./ur]
type = ParsedFunction
value = '0'
[../]
[./uz]
type = ParsedFunction
value = '0'
[../]
[./body]
type = ParsedFunction
value = '-400/x'
[../]
[./temp]
type = ParsedFunction
value = '117.56+100*t'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./temp]
initial_condition = 117.56
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
execute_on = timestep_end
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
execute_on = timestep_end
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
execute_on = timestep_end
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
execute_on = timestep_end
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 1
function = ur
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 2
function = uz
[../]
[./temp]
type = FunctionDirichletBC
variable = temp
boundary = 10
function = temp
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.25
temp = temp
thermal_expansion = 1e-6
[../]
[./heat]
type = HeatConductionMaterial
block = 1
specific_heat = 0.116
thermal_conductivity = 4.85e-4
[../]
[./density]
type = Density
density = 0.283
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-12
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 1
end_time = 1.0
[]
[Outputs]
file_base = elastic_thermal_jacobian_rz_smp_out
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
modules/solid_mechanics/test/tests/material_limit_time_step/creep/nafems_test5a_lim_no_comb.i
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
temp = temp
order = FIRST
family = LAGRANGE
[]
[Mesh]
file = plane1_mesh.e
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./temp]
initial_condition = 1500.0
[../]
[./creep]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./pressure]
order = CONSTANT
family = MONOMIAL
[../]
[./invariant3]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
[../]
[]
[AuxKernels]
[./creep_aux]
type = MaterialRealAux
property = effective_creep_strain
variable = creep
[../]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises
quantity = vonmises
[../]
[./pressure]
type = MaterialTensorAux
tensor = stress
variable = pressure
quantity = hydrostatic
[../]
[./invariant3]
type = MaterialTensorAux
tensor = stress
variable = invariant3
quantity = thirdInvariant
[../]
[./creep_strain_xx]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_xx
index = 0
[../]
[./creep_strain_yy]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_yy
index = 1
[../]
[./creep_strain_zz]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_zz
index = 2
[../]
[./creep_strain_xy]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_xy
index = 3
[../]
[./elastic_str_xx_aux]
type = MaterialTensorAux
tensor = elastic_strain
variable = elastic_strain_xx
index = 0
[../]
[./elastic_str_yy_aux]
type = MaterialTensorAux
tensor = elastic_strain
variable = elastic_strain_yy
index = 1
[../]
[./elastic_str_zz_aux]
type = MaterialTensorAux
tensor = elastic_strain
variable = elastic_strain_zz
index = 2
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 3
component = 1
factor = -100.0
[../]
[./side_press]
type = Pressure
variable = disp_x
boundary = 4
component = 0
factor = -200.0
[../]
[]
[Materials]
[./stiffStuff1]
type = SolidModel
block = 1
youngs_modulus = 200e3
poissons_ratio = 0.3
constitutive_model = creep_matl
formulation = NonlinearPlaneStrain
large_strain = true
[../]
[./creep_matl]
type = PowerLawCreepModel
block = 1
coefficient = 3.125e-14
n_exponent = 5
activation_energy = 0
max_inelastic_increment = 0.01
compute_material_timestep_limit = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_rel_tol = 1e-5
nl_abs_tol = 1e-8
l_max_its = 50
nl_max_its = 100
end_time = 1000.0
num_steps = 10000
l_tol = 1e-3
[./TimeStepper]
type = IterationAdaptiveDT
dt = 1e-6
time_t = '1e-6 2e-6 3e-6 5e-6 9e-6 1.7e-5 3.3e-5 6.5e-5 1.29e-4 2.57e-4 5.13e-4 1.025e-3 2.049e-3 4.097e-3 8.193e-3 1.638e-2 3.276e-2 5.734e-2 0.106 0.180 0.291 0.457 0.706 1.08 1.64 2.48 3.74 5.63 8.46 12.7 19.1 28.7 43.0 64.5 108.0 194.0 366.0 710.0 1000.0'
time_dt = '1e-6 1e-6 2e-6 4e-6 8e-6 1.6e-5 3.2e-5 6.4e-5 1.28e-4 2.56e-4 5.12e-4 1.024e-3 2.048e-3 4.096e-3 8.192e-3 1.6384e-2 2.458e-2 4.915e-2 7.40e-2 0.111 0.166 0.249 0.374 0.560 0.840 1.26 1.89 2.83 4.25 6.40 9.6 14.3 21.5 43.0 86.1 172.0 344.0 290.0 290.0'
optimal_iterations = 30
iteration_window = 9
growth_factor = 2.0
cutback_factor = 0.5
timestep_limiting_postprocessor = matl_ts_min
[../]
[]
[Postprocessors]
[./matl_ts_min]
type = MaterialTimeStepPostprocessor
[../]
[./sigma_xx]
type = ElementAverageValue
variable = stress_xx
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./vonmises]
type = ElementAverageValue
variable = vonmises
[../]
[./pressure]
type = ElementAverageValue
variable = pressure
[../]
[./invariant3]
type = ElementAverageValue
variable = invariant3
[../]
[./eps_crp_xx]
type = ElementAverageValue
variable = creep_strain_xx
[../]
[./eps_crp_yy]
type = ElementAverageValue
variable = creep_strain_yy
[../]
[./eps_crp_zz]
type = ElementAverageValue
variable = creep_strain_zz
[../]
[./eps_crp_mag]
type = ElementAverageValue
variable = creep
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x3]
type = NodalVariableValue
nodeid = 2
variable = disp_x
[../]
[./disp_y3]
type = NodalVariableValue
nodeid = 2
variable = disp_y
[../]
[./disp_y4]
type = NodalVariableValue
nodeid = 3
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./elas_str_xx]
type = ElementAverageValue
variable = elastic_strain_xx
[../]
[./elas_str_yy]
type = ElementAverageValue
variable = elastic_strain_yy
[../]
[./elas_str_zz]
type = ElementAverageValue
variable = elastic_strain_zz
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 25
[../]
[]
test/tests/outputs/append_date/append_date.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
append_date = true
[./date]
type = Exodus
append_date_format = '%m-%d-%Y'
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/frictional_02_penalty.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.2 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[] # Materials
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
# petsc_options_iname = '-pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter -ksp_gmres_restart'
# petsc_options_value = 'hypre boomeramg 4 101'
nl_abs_tol = 1e-7
l_max_its = 200
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.2
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
test/tests/outputs/postprocessor/postprocessor.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[AuxVariables]
[./aux0]
order = SECOND
family = SCALAR
[../]
[./aux1]
family = SCALAR
initial_condition = 5
[../]
[./aux2]
family = SCALAR
initial_condition = 10
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./diff_v]
type = CoefDiffusion
variable = v
coef = 2
[../]
[]
[BCs]
[./right_u]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_u]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = right
value = 3
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = left
value = 2
[../]
[]
[Postprocessors]
[./num_vars]
type = NumVars
system = 'ALL'
outputs = 'exodus2 console'
[../]
[./num_aux]
type = NumVars
system = 'AUX'
outputs = 'exodus'
[../]
[./num_nonlinear]
type = NumVars
system = 'NL'
outputs = 'all'
[../]
[./num_dofs]
type = NumDOFs
outputs = 'none'
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
[../]
[./exodus2]
type = Exodus
[../]
[]
[ICs]
[./aux0_IC]
variable = aux0
values = '12 13'
type = ScalarComponentIC
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/frictionless_penalty.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./constitutive]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
file_base = frictionless_penalty_out
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
test/tests/outputs/oversample/oversample.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
refinements = 2
position = '1 1 0'
[../]
[]
modules/contact/test/tests/bouncing-block-contact/frictional-nodal-min-lm-mortar-disp.i
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[./disp_x]
block = '1 2'
[../]
[./disp_y]
block = '1 2'
[../]
[./normal_lm]
block = 3
[../]
[./tangential_lm]
block = 3
[../]
[]
[ICs]
[./disp_y]
block = 2
variable = disp_y
value = ${fparse starting_point + offset}
type = ConstantIC
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[Constraints]
[normal_lm]
type = NormalNodalLMMechanicalContact
master = 20
slave = 10
variable = normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
[]
[normal_x]
type = NormalMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[normal_y]
type = NormalMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_lm]
type = TangentialNodalLMMechanicalContact
master = 20
slave = 10
variable = tangential_lm
master_variable = disp_x
disp_y = disp_y
contact_pressure = normal_lm
ncp_function_type = min
mu = .1
[]
[tangential_x]
type = TangentialMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = tangential_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_y]
type = TangentialMortarMechanicalContact
master_boundary = 20
slave_boundary = 10
master_subdomain = 4
slave_subdomain = 3
variable = tangential_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[../]
[./leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[../]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[exodus]
type = Exodus
sync_times = '0 5 10 15 20 25 30 35 40 45 50'
file_base = frictional-nodal-min-lm-mortar-disp_out
[]
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart2_sm.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
order = FIRST
family = LAGRANGE
block = 1
[]
[Mesh]
file = 1hex8_10mm_cube.e
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
x = '0 1e6 2e6 2.001e6 2.002e6'
y = '0 3e8 3e8 12e8 0'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
[../]
[]
[AuxVariables]
[./vonmises_stress]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[AuxKernels]
[./vonmises_stress]
type = MaterialTensorAux
tensor = stress
variable = vonmises_stress
quantity = vonmises
execute_on = timestep_end
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elastic]
type = Elastic
youngs_modulus = 300e6
poissons_ratio = .3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
thermal_expansion = 5e-6
stress_free_temperature = 300.0
formulation = Nonlinear3D
increment_calculation = Eigen
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
num_steps = 50000
end_time = 2.002e6
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e7
dt = 1e6
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[]
[Problem]
restart_file_base = adapt_tstep_function_change_restart1_sm_checkpoint_cp/0065
[]
test/tests/outputs/iterative/iterative_steady.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
preset = false
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
preset = false
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
execute_on = 'initial timestep_end failed nonlinear linear'
sequence = false
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template2_sm.i
[Mesh]
file = cyl4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_force_step.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
order = FIRST
family = LAGRANGE
block = 1
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = 1hex8_10mm_cube.e
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
data_file = blip.csv
format = columns
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
initial_condition = 300.0
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = FINITE
incremental = true
eigenstrain_names = thermal_expansion
add_variables = true
generate_output = 'vonmises_stress'
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 300e6
poissons_ratio = .3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./thermal_expansion]
type = ComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 5e-6
stress_free_temperature = 300.0
temperature = temp
eigenstrain_name = thermal_expansion
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
start_time = 0.0
num_steps = 50000
end_time = 5.1e3
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e20
force_step_every_function_point = true
dt = 1e2
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'initial timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[]
modules/heat_conduction/test/tests/meshed_gap_thermal_contact/meshed_gap_thermal_contact_constant_conductance.i
[Mesh]
[fmesh]
type = FileMeshGenerator
file = meshed_gap.e
[]
[block0]
type = SubdomainBoundingBoxGenerator
input = fmesh
bottom_left = '.5 -.5 0'
top_right = '.7 .5 0'
block_id = 4
[]
[]
[Variables]
[./temp]
block = '1 3'
initial_condition = 1.0
[../]
[]
[Kernels]
[./hc]
type = HeatConduction
variable = temp
block = '1 3'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = temp
boundary = 1
value = 1
[../]
[./right]
type = DirichletBC
variable = temp
boundary = 4
value = 2
[../]
[]
[ThermalContact]
[./gap_conductance]
type = GapHeatTransfer
variable = temp
master = 2
slave = 3
gap_conductance = 2.5
[../]
[]
[Materials]
[./hcm]
type = HeatConductionMaterial
block = '1 3'
temp = temp
thermal_conductivity = 1
[../]
[]
[Problem]
type = FEProblem
kernel_coverage_check = false
material_coverage_check = false
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
test/tests/restart/new_dt/new_dt_restart.i
[Mesh]
file = new_dt_out_cp/0010_mesh.cpr
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 10
# Here we are supplying a different dt
dt = 0.25
start_time = 1.0
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./exodus]
type = Exodus
execute_on = 'timestep_end final'
[../]
[]
[Problem]
restart_file_base = new_dt_out_cp/0010
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictional_02_penalty_sm.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0.2 is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.2
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/solid_mechanics/test/tests/CLSH_smallstrain/CLSH_smallstrain.i
#This is a test of the CLSHPlasticMaterial (creep linear strain hardening) model using the small strain formulation. Note that this isn't a thermal or irradiation creep model.
#The material CLSHPlasticMaterial is a visco-plastic material i.e. a
#time-dependent linear strain hardening plasticity model.
#A similar problem was run in Abaqus with exactly the same result, although the element
#used in the Abaqus simulation was a CAX4 element. Neverthless, due to the boundary conditions
#and load, the Bison and Abaqus result
[Mesh]
file = 1x1x1cube.e
# displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t/100
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./plastic_strain_xx]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_xx
index = 0
[../]
[./plastic_strain_yy]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_yy
index = 1
[../]
[./plastic_strain_zz]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_zz
index = 2
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./constant]
type = CLSHPlasticMaterial
formulation = LINEAr
block = 1
youngs_modulus = 1000.
poissons_ratio = .3
yield_stress = 10.
hardening_constant = 100.
c_alpha = 0.2418e-6
c_beta = 0.1135
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
line_search = none
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
# end_time = 0.3
num_steps = 30
dt = 1.
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/solid_mechanics/test/tests/umat_linear_strain_hardening/umat_linear_strain_hardening.i
# Testing the UMAT Interface - creep linear strain hardening model using the small strain formulation - visco-plastic material.
# Note that this isn't a thermal or irradiation creep model.
[Mesh]
file = 1x1x1cube.e
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t/100
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./constant]
type = AbaqusUmatMaterial
formulation = linear
block = 1
youngs_modulus = 1000.
poissons_ratio = .3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
mechanical_constants = '1000. 0.3 10. 100.'
plugin = ../../plugins/linear_strain_hardening
num_state_vars = 3
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
num_steps = 30
dt = 1.
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
tutorials/darcy_thermo_mech/step11_action/problems/step11.i
[GlobalParams]
displacements = 'disp_r disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 2
ny = 200
nx = 10
ymax = 0.304 # Length of test chamber
xmax = 0.0257 # Test chamber radius
[]
[Variables]
[pressure]
[]
[temperature]
initial_condition = 300 # Start at room temperature
[]
[]
[DarcyThermoMech]
[]
[Modules/TensorMechanics/Master]
[all]
# This block adds all of the proper Kernels, strain calculators, and Variables
# for TensorMechanics in the correct coordinate system (autodetected)
add_variables = true
strain = FINITE
eigenstrain_names = eigenstrain
use_automatic_differentiation = true
generate_output = 'vonmises_stress elastic_strain_xx elastic_strain_yy strain_xx strain_yy'
[]
[]
[BCs]
[inlet]
type = DirichletBC
variable = pressure
boundary = bottom
value = 4000 # (Pa) From Figure 2 from paper. First data point for 1mm spheres.
[]
[outlet]
type = DirichletBC
variable = pressure
boundary = top
value = 0 # (Pa) Gives the correct pressure drop from Figure 2 for 1mm spheres
[]
[inlet_temperature]
type = FunctionDirichletBC
variable = temperature
boundary = bottom
function = 'if(t<0,350+50*t,350)'
[]
[outlet_temperature]
type = HeatConductionOutflow
variable = temperature
boundary = top
[]
[hold_inlet]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0
[]
[hold_center]
type = DirichletBC
variable = disp_r
boundary = left
value = 0
[]
[hold_outside]
type = DirichletBC
variable = disp_r
boundary = right
value = 0
[]
[]
[Materials]
viscosity_file = data/water_viscosity.csv
density_file = data/water_density.csv
thermal_conductivity_file = data/water_thermal_conductivity.csv
specific_heat_file = data/water_specific_heat.csv
thermal_expansion_file = data/water_thermal_expansion.csv
[column]
type = PackedColumn
block = 0
temperature = temperature
radius = 1.15
fluid_viscosity_file = ${viscosity_file}
fluid_density_file = ${density_file}
fluid_thermal_conductivity_file = ${thermal_conductivity_file}
fluid_specific_heat_file = ${specific_heat_file}
fluid_thermal_expansion_file = ${thermal_expansion_file}
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 200e9 # (Pa) from wikipedia
poissons_ratio = .3 # from wikipedia
[]
[elastic_stress]
type = ADComputeFiniteStrainElasticStress
[]
[thermal_strain]
type = ADComputeThermalExpansionEigenstrain
stress_free_temperature = 300
eigenstrain_name = eigenstrain
temperature = temperature
thermal_expansion_coeff = 1e-5
[]
[]
[Postprocessors]
[average_temperature]
type = ElementAverageValue
variable = temperature
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Executioner]
type = Transient
start_time = -1
end_time = 200
steady_state_tolerance = 1e-7
steady_state_detection = true
dt = 0.25
solve_type = PJFNK
automatic_scaling = true
compute_scaling_once = false
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 500'
line_search = none
[TimeStepper]
type = FunctionDT
function = 'if(t<0,0.1,0.25)'
[]
[]
[Outputs]
[out]
type = Exodus
elemental_as_nodal = true
[]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring3_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
# petsc_options = '-mat_superlu_dist_iterrefine -mat_superlu_dist_replacetinypivot'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/outputs/intervals/intervals.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
interval = 5
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
order = FIRST
family = LAGRANGE
block = 1
[]
[Mesh]
file = 1hex8_10mm_cube.e
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
x = '0 1e6 2e6 2.001e6 2.002e6'
y = '0 3e8 3e8 12e8 0'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
initial_condition = 300.0
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = FINITE
volumetric_locking_correction = true
incremental = true
eigenstrain_names = thermal_expansion
decomposition_method = EigenSolution
add_variables = true
generate_output = 'vonmises_stress'
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 300e6
poissons_ratio = .3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./thermal_expansion]
type = ComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 5e-6
stress_free_temperature = 300.0
temperature = temp
eigenstrain_name = thermal_expansion
[../]
[./density]
type = Density
density = 10963.0
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
start_time = 0.0
num_steps = 50000
end_time = 2.002e6
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e7
dt = 1e6
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'initial timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[]
modules/phase_field/test/tests/free_energy_material/MathFreeEnergy.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = SmoothCircleIC
variable = c
x1 = 25.0
y1 = 25.0
radius = 6.0
invalue = 1.0
outvalue = -0.8
int_width = 4.0
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CahnHilliard
variable = c
mob_name = M
f_name = F
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[./free_energy]
type = MathFreeEnergy
f_name = F
c = c
[../]
[]
[Executioner]
type = Transient
scheme = bdf2
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-5
nl_max_its = 40
nl_rel_tol = 5.0e-14
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
execute_on = 'timestep_end'
[./oversample]
type = Exodus
refinements = 2
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template1_sm.i
[Mesh]
file = brick1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/phase_field/test/tests/actions/conserved_direct_1var_variable_mob.i
#
# Test consreved action for direct solve
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 16
ny = 16
xmax = 50
ymax = 50
elem_type = QUAD
[]
[Modules]
[./PhaseField]
[./Conserved]
[./cv]
solve_type = direct
free_energy = F
kappa = 2.0
mobility = M
[../]
[../]
[../]
[]
[ICs]
[./InitialCondition]
type = CrossIC
x1 = 5.0
y1 = 5.0
x2 = 45.0
y2 = 45.0
variable = cv
[../]
[]
[Materials]
[./variable_mob]
type = DerivativeParsedMaterial
f_name = M
args = 'cv'
function = '0.1 + (1 + cv)/2'
[../]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'cv'
function = '(1-cv)^2 * (1+cv)^2'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
l_max_its = 30
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-10
start_time = 0.0
num_steps = 5
dt = 0.5
[]
[Outputs]
[./out]
type = Exodus
refinements = 2
[../]
[]
modules/solid_mechanics/test/tests/abaqus_creep_swelling/abaqus_creep_swelling.i
# Swelling test using CREEP subroutine interface
[Mesh]
# file = cantilever.e
type = GeneratedMesh
dim = 3
xmin = 0.0
xmax = 15.0
ymin = 0.0
ymax = 1.5
zmin = 0.0
zmax = 3.0
nx = 20
ny = 2
nz = 4
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
active = ''
[./stress_mag]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx]
family = MONOMIAL
[../]
[./stress_yy]
family = MONOMIAL
[../]
[./stress_zz]
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
active = ''
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
point1 = '0 0 0'
point2 = '0 1 0'
[../]
[./stress_mag]
type = MaterialTensorAux
variable = stress_mag
index = 1
tensor = stress
point1 = '0 0 0'
point2 = '0 1 0'
quantity = vonmises
[../]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
index = 0
tensor = stress
point1 = '0 0 0'
point2 = '0 1 0'
block = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
index = 2
tensor = stress
point1 = '0 0 0'
point2 = '0 1 0'
[../]
[]
[BCs]
[./bottom_x]
type = DirichletBC
variable = disp_x
boundary = right
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = right
value = 0.0
[../]
[./bottom_z]
type = DirichletBC
variable = disp_z
boundary = right
value = 0.0
[../]
[]
[Materials]
[./swelling]
type = AbaqusCreepMaterial
block = 0
plugin = ../../plugins/swelling
poissons_ratio = 0.3
integration_flag = 0
num_state_vars = 0
youngs_modulus = 209000
solve_definition = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
# [./solid]
# type = Elastic
# block = 0
# disp_x = disp_x
# disp_y = disp_y
# disp_z = disp_z
# youngs_modulus = 209000
# poissons_ratio = 0.3
# [../]
[]
[Executioner]
# l_max_its = 60
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew '
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type'
petsc_options_value = '101 hypre boomeramg'
nl_rel_tol = 1e-8
l_tol = 1e-5
start_time = 0.0
dt = 1
num_steps = 1
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/tensor_mechanics/test/tests/pressure/pressure_test.i
#
# Pressure Test
#
# This test is designed to compute pressure loads on three faces of a unit cube.
#
# The mesh is composed of one block with a single element. Symmetry bcs are
# applied to the faces opposite the pressures. Poisson's ratio is zero,
# which makes it trivial to check displacements.
#
[Mesh]
type = FileMesh
file = pressure_test.e
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./rampConstant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1.0
[../]
[./zeroRamp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0. 1.'
scale_factor = 1.0
[../]
[./rampUnramp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 0.'
scale_factor = 10.0
[../]
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./Pressure]
[./Side1]
boundary = 1
function = rampConstant
displacements = 'disp_x disp_y disp_z'
[../]
[./Side2]
boundary = 2
function = zeroRamp
displacements = 'disp_x disp_y disp_z'
factor = 2.0
[../]
[./Side3]
boundary = 3
function = rampUnramp
displacements = 'disp_x disp_y disp_z'
[../]
[../]
[]
[Materials]
[./Elasticity_tensor]
type = ComputeElasticityTensor
block = 1
fill_method = symmetric_isotropic
C_ijkl = '0 0.5e6'
[../]
[./strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
block = 1
[../]
[./stress]
type = ComputeLinearElasticStress
block = 1
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/phase_field/test/tests/free_energy_material/MathEBFreeEnergy.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = SmoothCircleIC
variable = c
x1 = 25.0
y1 = 25.0
radius = 6.0
invalue = 1.0
outvalue = -0.8
int_width = 4.0
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CahnHilliard
variable = c
mob_name = M
f_name = F
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[./free_energy]
type = MathEBFreeEnergy
f_name = F
c = c
[../]
[]
[Executioner]
type = Transient
scheme = bdf2
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-5
nl_max_its = 40
nl_rel_tol = 5.0e-14
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
execute_on = 'timestep_end'
[./oversample]
type = Exodus
refinements = 2
[../]
[]
modules/richards/test/tests/buckley_leverett/bl22_lumped.i
# two-phase version
# super-sharp front version
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
richardsVarNames_UO = PPNames
density_UO = 'DensityWater DensityGas'
relperm_UO = 'RelPermWater RelPermGas'
SUPG_UO = 'SUPGwater SUPGgas'
sat_UO = 'SatWater SatGas'
seff_UO = 'SeffWater SeffGas'
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-4 1E-3 1E-2 2E-2 5E-2 6E-2 0.1 0.2'
x = '0 1E-2 1E-1 1 5 20 40 41'
[../]
[]
[UserObjects]
[./PPNames]
type = RichardsVarNames
richards_vars = 'pwater pgas'
[../]
[./DensityWater]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./DensityGas]
type = RichardsDensityConstBulk
dens0 = 1
bulk_mod = 2E6
[../]
[./SeffWater]
type = RichardsSeff2waterVG
m = 0.8
al = 1E-4
[../]
[./SeffGas]
type = RichardsSeff2gasVG
m = 0.8
al = 1E-4
[../]
[./RelPermWater]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./RelPermGas]
type = RichardsRelPermPower
simm = 0.0
n = 2
[../]
[./SatWater]
type = RichardsSat
s_res = 0.0
sum_s_res = 0.0
[../]
[./SatGas]
type = RichardsSat
s_res = 0.0
sum_s_res = 0.0
[../]
[./SUPGwater]
type = RichardsSUPGstandard
p_SUPG = 1E-5
[../]
[./SUPGgas]
type = RichardsSUPGstandard
p_SUPG = 1E-5
[../]
[]
[Variables]
[./pwater]
order = FIRST
family = LAGRANGE
[../]
[./pgas]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./Seff1VG_Aux]
[../]
[./bounds_dummy]
[../]
[]
[Kernels]
active = 'richardsfwater richardstwater richardsfgas richardstgas'
[./richardstwater]
type = RichardsLumpedMassChange
variable = pwater
[../]
[./richardsfwater]
type = RichardsFlux
variable = pwater
[../]
[./richardstgas]
type = RichardsLumpedMassChange
variable = pgas
[../]
[./richardsfgas]
type = RichardsFlux
variable = pgas
[../]
[./richardsppenalty]
type = RichardsPPenalty
variable = pgas
a = 1E-18
lower_var = pwater
[../]
[]
[AuxKernels]
[./Seff1VG_AuxK]
type = RichardsSeffAux
variable = Seff1VG_Aux
seff_UO = SeffWater
pressure_vars = 'pwater pgas'
[../]
[]
[Bounds]
[./pwater_bounds]
type = BoundsAux
variable = bounds_dummy
bounded_variable = pwater
upper = 1E7
lower = -110000
[../]
[]
[ICs]
[./water_ic]
type = FunctionIC
variable = pwater
function = initial_water
[../]
[./gas_ic]
type = FunctionIC
variable = pgas
function = initial_gas
[../]
[]
[BCs]
[./left_w]
type = DirichletBC
variable = pwater
boundary = left
value = 1E6
[../]
[./left_g]
type = DirichletBC
variable = pgas
boundary = left
value = 1000
[../]
[./right_w]
type = DirichletBC
variable = pwater
boundary = right
value = -100000
[../]
[./right_g]
type = DirichletBC
variable = pgas
boundary = right
value = 0
[../]
[]
[Functions]
[./initial_water]
type = ParsedFunction
value = 1000000*(1-min(x/5,1))-if(x<5,0,100000)
[../]
[./initial_gas]
type = ParsedFunction
value = 1000
[../]
[]
[Materials]
[./rock]
type = RichardsMaterial
block = 0
mat_porosity = 0.15
mat_permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
viscosity = '1E-3 1E-6'
gravity = '0 0 0'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
active = 'standard'
[./bounded]
# must use --use-petsc-dm command line argument
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type -ksp_rtol -ksp_atol'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 50 vinewtonssls 1E-20 1E-20'
[../]
[./standard]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it -ksp_rtol -ksp_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 20 1E-10 1E-100'
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 50
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = bl22_lumped
[./exodus]
type = Exodus
interval = 100000
hide = 'pgas bounds_dummy'
execute_on = 'initial final timestep_end'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_mu_0_2_pen_sm.i
[Mesh]
file = brick3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x28]
type = NodalVariableValue
nodeid = 27
variable = disp_x
[../]
[./disp_x33]
type = NodalVariableValue
nodeid = 32
variable = disp_x
[../]
[./disp_y28]
type = NodalVariableValue
nodeid = 27
variable = disp_y
[../]
[./disp_y33]
type = NodalVariableValue
nodeid = 32
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x28 disp_y28 disp_x33 disp_y33 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+6
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_penalty.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = frictionless
formulation = penalty
penalty = 1e+7
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_sm.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
order = FIRST
family = LAGRANGE
block = 1
[]
[Mesh]
file = 1hex8_10mm_cube.e
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
x = '0 1e6 2e6 2.001e6 2.002e6'
y = '0 3e8 3e8 12e8 0'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
initial_condition = 300.0
[../]
[]
[AuxVariables]
[./vonmises_stress]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[AuxKernels]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises_stress
quantity = vonmises
execute_on = timestep_end
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elastic]
type = Elastic
youngs_modulus = 300e6
poissons_ratio = .3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
thermal_expansion = 5e-6
stress_free_temperature = 300.0
increment_calculation = Eigen
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
start_time = 0.0
num_steps = 50000
end_time = 2.002e6
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e7
dt = 1e6
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'initial timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[]
test/tests/auxkernels/element_aux_var/element_high_order_aux_test.i
[Mesh]
file = square.e
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./high_order]
order = NINTH
family = MONOMIAL
[../]
[./one]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
# Coupling of nonlinear to Aux
[./diff]
type = Diffusion
variable = u
[../]
[./force]
type = CoupledForce
variable = u
v = one
[../]
[]
[AuxKernels]
[./coupled_high_order]
variable = high_order
type = CoupledAux
value = 2
operator = +
coupled = u
execute_on = 'initial timestep_end'
[../]
[./constant]
variable = one
type = ConstantAux
value = 1
execute_on = 'initial timestep_end'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Postprocessors]
[./int2_u]
type = ElementL2Norm
variable = u
execute_on = 'initial timestep_end'
[../]
[./int2_ho]
type = ElementL2Norm
variable = high_order
execute_on = 'initial timestep_end'
[../]
[./int_u]
type = ElementIntegralVariablePostprocessor
variable = u
execute_on = 'initial timestep_end'
[../]
[./int_ho]
type = ElementIntegralVariablePostprocessor
variable = high_order
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./ex_out]
type = Exodus
file_base = ho
elemental_as_nodal = true
[../]
[]
python/chigger/tests/input/sub.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
use_problem_dimension = false
[../]
[]
modules/porous_flow/test/tests/flux_limited_TVD_pflow/pffltvd_2D_angle.i
# Using flux-limited TVD advection ala Kuzmin and Turek, mploying PorousFlow Kernels and UserObjects, with superbee flux-limiter
# 2D version with velocity = (0.1, 0.2, 0)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
xmin = 0
xmax = 1
ny = 10
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[./porepressure]
[../]
[./tracer]
[../]
[]
[ICs]
[./porepressure]
type = FunctionIC
variable = porepressure
function = '1 - x - 2 * y'
[../]
[./tracer]
type = FunctionIC
variable = tracer
function = 'if(x<0.1 | x > 0.3 | y < 0.1 | y > 0.3, 0, 1)'
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = tracer
[../]
[./flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer
advective_flux_calculator = advective_flux_calculator_0
[../]
[./mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = porepressure
[../]
[./flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = porepressure
advective_flux_calculator = advective_flux_calculator_1
[../]
[]
[BCs]
[./constant_boundary_porepressure]
type = FunctionDirichletBC
variable = porepressure
function = '1 - x - 2 * y'
boundary = 'left right top bottom'
[../]
[./no_tracer_at_boundary]
type = DirichletBC
variable = tracer
value = 0
boundary = 'left right top bottom'
[../]
[]
[Modules]
[./FluidProperties]
[./the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
thermal_expansion = 0
viscosity = 1.0
density0 = 1000.0
[../]
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure tracer'
number_fluid_phases = 1
number_fluid_components = 2
[../]
[./pc]
type = PorousFlowCapillaryPressureConst
[../]
[./advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 0
[../]
[./advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
fluid_component = 1
[../]
[]
[Materials]
[./temperature]
type = PorousFlowTemperature
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[../]
[./massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = tracer
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[../]
[./relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[../]
[./porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-2 0 0 0 1E-2 0 0 0 1E-2'
[../]
[]
[Preconditioning]
active = basic
[./basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[../]
[./preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 0.3
dt = 0.1
[]
[Outputs]
[./out]
type = Exodus
execute_on = 'initial final'
[../]
[]
modules/phase_field/test/tests/actions/conserved_direct_1var.i
#
# Test consreved action for direct solve
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 16
ny = 16
xmax = 50
ymax = 50
elem_type = QUAD
[]
[Modules]
[./PhaseField]
[./Conserved]
[./cv]
solve_type = direct
free_energy = F
kappa = 2.0
mobility = 1.0
[../]
[../]
[../]
[]
[ICs]
[./InitialCondition]
type = CrossIC
x1 = 5.0
y1 = 5.0
x2 = 45.0
y2 = 45.0
variable = cv
[../]
[]
[Materials]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'cv'
function = '(1-cv)^2 * (1+cv)^2'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
l_max_its = 30
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-10
start_time = 0.0
num_steps = 5
dt = 0.7
[]
[Outputs]
[./out]
type = Exodus
refinements = 2
[../]
[]
modules/tensor_mechanics/test/tests/recompute_radial_return/isotropic_plasticity_finite_strain.i
# This simulation uses the piece-wise linear strain hardening model
# with the incremental small strain formulation; incremental small strain
# is required to produce the strain_increment for the DiscreteRadialReturnStressIncrement
# class, which handles the calculation of the stress increment to return
# to the yield surface in a J2 (isotropic) plasticity problem.
#
# This test assumes a Poissons ratio of 0.3 and applies a displacement loading
# condition on the top in the y direction.
#
# An identical problem was run in Abaqus on a similar 1 element mesh and was used
# to verify the SolidMechanics solution; this TensorMechanics code matches the
# SolidMechanics solution.
#
# Mechanical strain is the sum of the elastic and plastic strains but is different
# from total strain in cases with eigen strains, e.g. thermal strain.
[Mesh]
file = 1x1x1cube.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(0.0625)
[../]
[./hf]
type = PiecewiseLinear
x = '0 0.001 0.003 0.023'
y = '50 52 54 56'
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = FINITE
add_variables = true
generate_output = 'stress_yy plastic_strain_xx plastic_strain_yy plastic_strain_zz'
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 2.1e5
poissons_ratio = 0.3
[../]
[./isotropic_plasticity]
type = IsotropicPlasticityStressUpdate
yield_stress = 50.0
hardening_function = hf
[../]
[./radial_return_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'isotropic_plasticity'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
line_search = 'none'
l_max_its = 50
nl_max_its = 50
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
end_time = 0.075
dt = 0.00125
dtmin = 0.0001
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_mu_0_2_pen_sm.i
[Mesh]
file = ring4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/simple_contact/simple_contact_rz_test.i
#
# The analytic solution is:
# disp_x = -7e-5 * x
# disp_y = 6e-5 * y
# stress_xx = stress_zz = -100
# stress_yy = stress_xy = 0
#
# Note: Run merged_rz.i to generate a solution to compare to that doesn't use contact.
[Mesh]
file = contact_rz.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0 1'
y = '0 1'
scale_factor = 100
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
incremental = true
strain = FINITE
generate_output = 'stress_xx stress_xy stress_zx stress_yy stress_zz stress_yz'
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 10
value = 0.0
[../]
[./Pressure]
[./right_pressure]
boundary = 4
function = pressure
[../]
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-9
l_max_its = 20
dt = 1.0
end_time = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_penalty.i
# This is a benchmark test that checks constraint based frictionless
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_mu_0_2_pen_sm.i
[Mesh]
file = brick1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/elastic_thermal_patch/elastic_thermal_patch_rz_smp.i
#
# This problem is modified from the Abaqus verification manual:
# "1.5.4 Patch test for axisymmetric elements"
# The original stress solution is given as:
# xx = yy = zz = 2000
# xy = 400
#
# Here, E=1e6 and nu=0.25.
# However, with a +100 degree change in temperature and a coefficient
# of thermal expansion of 1e-6, the solution becomes:
# xx = yy = zz = 1800
# xy = 400
# since
# E*(1-nu)/(1+nu)/(1-2*nu)*(1+2*nu/(1-nu))*(1e-3-1e-4) = 1800
#
# Also,
#
# dSrr dSrz Srr-Stt
# ---- + ---- + ------- + br = 0
# dr dz r
#
# and
#
# dSrz Srz dSzz
# ---- + --- + ---- + bz = 0
# dr r dz
#
# where
# Srr = stress in rr
# Szz = stress in zz
# Stt = stress in theta-theta
# Srz = stress in rz
# br = body force in r direction
# bz = body force in z direction
#
# This test is meant to exercise the Jacobian. To that end, the body
# force has been turned off. This makes the results differ slightly
# from the original values, but requires a correct Jacobian for minimal
# iterations. Iteration plotting is turned on to ensure that the
# number of iterations needed does not increase.
[GlobalParams]
temperature = temp
volumetric_locking_correction = true
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_thermal_patch_rz_test.e
[]
[Functions]
[./ur]
type = ParsedFunction
value = '1e-3*x'
[../]
[./uz]
type = ParsedFunction
value = '1e-3*(x+y)'
[../]
[./body]
type = ParsedFunction
value = '-400/x'
[../]
[./temp]
type = ParsedFunction
value = '117.56+100*t'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./temp]
initial_condition = 117.56
[../]
[]
[Modules]
[TensorMechanics]
[Master]
displacements = 'disp_x disp_y'
[All]
displacements = 'disp_x disp_y'
add_variables = true
strain = SMALL
incremental = true
eigenstrain_names = eigenstrain
generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx'
[../]
[../]
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 10
function = ur
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 10
function = uz
[../]
[./temp]
type = FunctionDirichletBC
variable = temp
boundary = 10
function = temp
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 666666.6666666667
poissons_ratio = 0.25
[../]
[./thermal_strain]
type = ComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 1e-6
stress_free_temperature = 117.56
eigenstrain_name = eigenstrain
[../]
[./stress]
type = ComputeStrainIncrementBasedStress
[../]
[./heat]
type = HeatConductionMaterial
specific_heat = 0.116
thermal_conductivity = 4.85e-4
[../]
[./density]
type = Density
block = 1
density = 0.283
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
nl_abs_tol = 1e-11
nl_rel_tol = 1e-12
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 1
end_time = 1.0
[]
[Outputs]
file_base = elastic_thermal_patch_rz_smp_out
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
modules/tensor_mechanics/test/tests/mohr_coulomb/uni_axial3_planar.i
# same as uni_axial2 but with planar mohr-coulomb
[Mesh]
type = FileMesh
file = quarter_hole.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[]
[BCs]
[./zmin_zzero]
type = DirichletBC
variable = disp_z
boundary = 'zmin'
value = '0'
[../]
[./xmin_xzero]
type = DirichletBC
variable = disp_x
boundary = 'xmin'
value = '0'
[../]
[./ymin_yzero]
type = DirichletBC
variable = disp_y
boundary = 'ymin'
value = '0'
[../]
[./ymax_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 'ymax'
function = '-1E-4*t'
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./mc_int]
order = CONSTANT
family = MONOMIAL
[../]
[./yield_fcn]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[../]
[./stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[../]
[./stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[../]
[./mc_int_auxk]
type = MaterialStdVectorAux
index = 0
property = plastic_internal_parameter
variable = mc_int
[../]
[./yield_fcn_auxk]
type = MaterialStdVectorAux
index = 0
property = plastic_yield_function
variable = yield_fcn
[../]
[]
[Postprocessors]
[./s_xx]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_xx
[../]
[./s_xy]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_xy
[../]
[./s_xz]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_xz
[../]
[./s_yy]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_yy
[../]
[./s_yz]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_yz
[../]
[./s_zz]
type = PointValue
point = '0.005 0.02 0.002'
variable = stress_zz
[../]
[./f]
type = PointValue
point = '0.005 0.02 0.002'
variable = yield_fcn
[../]
[]
[UserObjects]
[./coh]
type = TensorMechanicsHardeningConstant
value = 1E7
[../]
[./fric]
type = TensorMechanicsHardeningConstant
value = 40
convert_to_radians = true
[../]
[./dil]
type = TensorMechanicsHardeningConstant
value = 40
convert_to_radians = true
[../]
[./mc]
type = TensorMechanicsPlasticMohrCoulombMulti
cohesion = coh
friction_angle = fric
dilation_angle = dil
yield_function_tolerance = 1.0 # THIS IS HIGHER THAN THE SMOOTH CASE TO AVOID PRECISION-LOSS PROBLEMS!
shift = 1.0
use_custom_returnMap = false
internal_constraint_tolerance = 1E-9
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeElasticityTensor
block = 1
fill_method = symmetric_isotropic
C_ijkl = '0 5E9' # young = 10Gpa, poisson = 0.0
[../]
[./strain]
type = ComputeIncrementalSmallStrain
block = 1
displacements = 'disp_x disp_y disp_z'
[../]
[./mc]
type = ComputeMultiPlasticityStress
block = 1
ep_plastic_tolerance = 1E-9
plastic_models = mc
max_NR_iterations = 100
deactivation_scheme = 'safe'
min_stepsize = 1
max_stepsize_for_dumb = 1
debug_fspb = crash
[../]
[]
# Preconditioning and Executioner options kindly provided by Andrea
[Preconditioning]
[./andy]
type = SMP
full = true
[../]
[]
[Executioner]
end_time = 1.05
dt = 0.1
solve_type = NEWTON
type = Transient
[]
[Outputs]
file_base = uni_axial3_planar
[./exodus]
type = Exodus
hide = 'stress_xx stress_xy stress_xz stress_yy stress_yz stress_zz yield_fcn s_xx s_xy s_xz s_yy s_yz s_zz f'
[../]
[./csv]
type = CSV
interval = 1
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictional_02_penalty_sm.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0.2 is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-3
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.2
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/solid_mechanics/test/tests/LSH_smallstrain/LSH_smallstrain_rz_test.i
[Problem]
coord_type = RZ
[]
[Mesh]
file = LSH_rz.e
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(1.0/5.0)
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[AuxKernels]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./plastic_strain_xx]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_xx
index = 0
[../]
[./plastic_strain_yy]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_yy
index = 1
[../]
[./plastic_strain_zz]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_zz
index = 2
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[]
[Materials]
[./LSHRZ]
type = LinearStrainHardening
block = 1
youngs_modulus = 2.1e5
poissons_ratio = 0.3
yield_stress = 2.4e2
hardening_constant = 1206
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Executioner]
type = Transient
# Two sets of linesearch options are for petsc 3.1 and 3.3 respectively
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
# end_time = 1.0
end_time = 0.0105
# num_steps = 100
dt = 1.e-3
[]
[Outputs]
file_base = out_rz
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/fieldsplit_contact/2blocks3d_sm.i
[GlobalParams]
order = FIRST
family = LAGRANGE
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = 2blocks3d.e
patch_size = 5
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[]
[Functions]
[./horizontal_movement]
type = ParsedFunction
value = t/10.0
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
[../]
[]
[BCs]
[./push_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 1
function = horizontal_movement
[../]
[./fix_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./fix_y]
type = DirichletBC
variable = disp_y
boundary = '1 4'
value = 0.0
[../]
[./fix_z]
type = DirichletBC
variable = disp_z
boundary = '1 4'
value = 0.0
[../]
[]
[Materials]
[./left]
type = Elastic
block = 1
poissons_ratio = 0.3
youngs_modulus = 1e6
formulation = Nonlinear3D
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[./right]
type = Elastic
block = 2
poissons_ratio = 0.3
youngs_modulus = 1e6
formulation = Nonlinear3D
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Contact]
[./leftright]
slave = 2
master = 3
model = frictionless
penalty = 1e+6
normalize_penalty = true
formulation = kinematic
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
[Preconditioning]
active = 'FSP'
[./FSP]
type = FSP
# It is the starting point of splitting
topsplit = 'contact_interior' # 'contact_interior' should match the following block name
[./contact_interior]
splitting = 'contact interior'
splitting_type = multiplicative
[../]
[./interior]
type = ContactSplit
vars = 'disp_x disp_y disp_z'
uncontact_master = '3'
uncontact_slave = '2'
uncontact_displaced = '1'
blocks = '1 2'
include_all_contact_nodes = 1
petsc_options_iname = '-ksp_type -ksp_max_it -ksp_rtol -ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter -pc_hypre_strong_threshold'
petsc_options_value = ' preonly 10 1e-4 201 hypre boomeramg 1 0.25'
[../]
[./contact]
type = ContactSplit
vars = 'disp_x disp_y disp_z'
contact_master = '3'
contact_slave = '2'
contact_displaced = '1'
include_all_contact_nodes = 1
petsc_options_iname = '-ksp_type -ksp_max_it -pc_type -pc_asm_overlap -sub_pc_type -pc_factor_levels'
petsc_options_value = ' preonly 10 asm 1 lu 0'
[../]
[../]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.1
dtmin = 0.1
end_time = 0.1
l_tol = 1e-4
l_max_its = 100
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
nl_max_its = 100
[]
[Outputs]
file_base = 2blocks3d_out
[./exodus]
type = Exodus
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
modules/phase_field/test/tests/initial_conditions/BimodalSuperellipsoidsIC.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = BimodalSuperellipsoidsIC
variable = c
x_positions = '10.0 40.0'
y_positions = '25.0 25.0'
z_positions = '0.0 0.0'
as = '8.0 8.0'
bs = '8.0 8.0'
cs = '1 1'
ns = '3.5 3.5'
npart = 5
invalue = 1.0
outvalue = -0.8
int_width = 4.0
large_spac = 5
small_spac = 2
small_a = 5
small_b = 5
small_c = 5
small_n = 2
size_variation_type = normal
size_variation = 0.5
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CHMath
variable = c
mob_name = M
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-4
nl_max_its = 40
nl_rel_tol = 1e-9
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
exodus = false
[./out]
type = Exodus
refinements = 2
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictional_04_penalty_sm.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0. is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.4
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template2_sm.i
[Mesh]
file = ring3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/phase_field/test/tests/phase_field_kernels/SimpleCHInterface.i
#
# Test the non-split parsed function free enery Cahn-Hilliard kernel
# The free energy used here has the same functional form as the CHPoly kernel
# If everything works, the output of this test should replicate the output
# of marmot/tests/chpoly_test/CHPoly_test.i (exodiff match)
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 16
ny = 16
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./cv]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./InitialCondition]
type = CrossIC
x1 = 5.0
y1 = 5.0
x2 = 45.0
y2 = 45.0
variable = cv
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = cv
[../]
[./CHSolid]
type = CahnHilliard
variable = cv
f_name = F
mob_name = M
[../]
[./CHInterface]
type = SimpleCHInterface
variable = cv
mob_name = M
kappa_name = kappa_c
[../]
[]
[Materials]
[./consts]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1 0.1'
[../]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'cv'
function = '(1-cv)^2 * (1+cv)^2'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 15
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-11
start_time = 0.0
num_steps = 2
dt = 0.7
[]
[Outputs]
[./out]
type = Exodus
refinements = 1
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/sm/frictionless_penalty_sm.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring4_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q4/hertz_cyl_half_1deg_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = hertz_cyl_half_1deg.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.0020 -0.0020'
[../]
[./disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.0014'
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./disp_x226]
type = NodalVariableValue
nodeid = 225
variable = disp_x
[../]
[./disp_y226]
type = NodalVariableValue
nodeid = 225
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[../]
[./top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[../]
[./top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[../]
[]
[Materials]
[./stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[../]
[./stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff2_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[./stuff3_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '3'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff3_strain]
type = ComputeFiniteStrain
block = '3'
[../]
[./stuff3_stress]
type = ComputeFiniteStrainElasticStress
block = '3'
[../]
[./stuff4_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '4'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff4_strain]
type = ComputeFiniteStrain
block = '4'
[../]
[./stuff4_stress]
type = ComputeFiniteStrainElasticStress
block = '4'
[../]
[./stuff5_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '5'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff5_strain]
type = ComputeFiniteStrain
block = '5'
[../]
[./stuff5_stress]
type = ComputeFiniteStrainElasticStress
block = '5'
[../]
[./stuff6_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '6'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff6_strain]
type = ComputeFiniteStrain
block = '6'
[../]
[./stuff6_stress]
type = ComputeFiniteStrainElasticStress
block = '6'
[../]
[./stuff7_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff7_strain]
type = ComputeFiniteStrain
block = '7'
[../]
[./stuff7_stress]
type = ComputeFiniteStrainElasticStress
block = '7'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-6
nl_rel_tol = 1e-5
l_max_its = 100
nl_max_its = 200
start_time = 0.0
end_time = 3.5
l_tol = 1e-3
dt = 0.1
dtmin = 0.1
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'x_disp y_disp cont_press'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./chkfile2]
type = CSV
show = 'bot_react_x bot_react_y disp_x226 disp_y226 top_react_x top_react_y'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./interface]
master = 2
slave = 3
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+10
system = Constraint
[../]
[]
modules/porous_flow/test/tests/dirackernels/bh07.i
# Comparison with analytical solution for cylindrically-symmetric situation
[Mesh]
type = FileMesh
file = bh07_input.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1000 10000'
x = '100 1000'
[../]
[]
[Variables]
[./pp]
initial_condition = 1E7
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[../]
[./fflux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[../]
[]
[BCs]
[./fix_outer]
type = DirichletBC
boundary = perimeter
variable = pp
value = 1E7
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[../]
[./pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./temperature]
type = PorousFlowTemperature
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[../]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-11 0 0 0 1E-11 0 0 0 1E-11'
[../]
[./relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[../]
[]
[DiracKernels]
[./bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh07.bh
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
re_constant = 0.1594 # use Chen and Zhang version
character = 2 # double the strength because bh07.bh only fills half the mesh
[../]
[]
[Postprocessors]
[./bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
execute_on = 'initial timestep_end'
[../]
[./fluid_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[../]
[]
[VectorPostprocessors]
[./pp]
type = LineValueSampler
variable = pp
start_point = '0 0 0'
end_point = '300 0 0'
sort_by = x
num_points = 300
execute_on = timestep_end
[../]
[]
[Preconditioning]
[./usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[../]
[]
[Executioner]
type = Transient
end_time = 1E3
solve_type = NEWTON
[./TimeStepper]
# get only marginally better results for smaller time steps
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = bh07
[./along_line]
type = CSV
execute_on = final
[../]
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[]
modules/navier_stokes/test/tests/ins/mms/supg/supg_adv_dominated_mms.i
mu=1.5e-2
rho=2.5
[GlobalParams]
gravity = '0 0 0'
supg = true
convective_term = true
integrate_p_by_parts = false
transient_term = true
laplace = true
u = vel_x
v = vel_y
p = p
alpha = 1e0
order = SECOND
family = LAGRANGE
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
elem_type = QUAD9
nx = 4
ny = 4
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./vel_x]
[../]
[./vel_y]
[../]
[./p]
order = FIRST
[../]
[]
[Kernels]
# mass
[./mass]
type = INSMass
variable = p
[../]
[./x_time]
type = INSMomentumTimeDerivative
variable = vel_x
[../]
[./y_time]
type = INSMomentumTimeDerivative
variable = vel_y
[../]
# x-momentum, space
[./x_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_x
component = 0
forcing_func = vel_x_source_func
[../]
# y-momentum, space
[./y_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_y
component = 1
forcing_func = vel_y_source_func
[../]
[./p_source]
type = BodyForce
function = p_source_func
variable = p
[../]
[]
[BCs]
[./vel_x]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = vel_x_func
variable = vel_x
[../]
[./vel_y]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = vel_y_func
variable = vel_y
[../]
[./p]
type = FunctionDirichletBC
boundary = 'left right top bottom'
function = p_func
variable = p
[../]
[]
[Functions]
[./vel_x_source_func]
type = ParsedFunction
value = '-${mu}*(-0.028*pi^2*x^2*sin(0.2*pi*x*y) - 0.028*pi^2*y^2*sin(0.2*pi*x*y) - 0.1*pi^2*sin(0.5*pi*x) - 0.4*pi^2*sin(pi*y)) + ${rho}*(0.14*pi*x*cos(0.2*pi*x*y) + 0.4*pi*cos(pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*y*cos(0.2*pi*x*y) + 0.25*pi*cos(0.5*pi*x)'
[../]
[./vel_y_source_func]
type = ParsedFunction
value = '-${mu}*(-0.018*pi^2*x^2*sin(0.3*pi*x*y) - 0.018*pi^2*y^2*sin(0.3*pi*x*y) - 0.384*pi^2*sin(0.8*pi*x) - 0.027*pi^2*sin(0.3*pi*y)) + ${rho}*(0.06*pi*x*cos(0.3*pi*x*y) + 0.09*pi*cos(0.3*pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.06*pi*y*cos(0.3*pi*x*y) + 0.48*pi*cos(0.8*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*x*cos(0.2*pi*x*y) + 0.3*pi*cos(0.3*pi*y)'
[../]
[./p_source_func]
type = ParsedFunction
value = '-0.06*pi*x*cos(0.3*pi*x*y) - 0.14*pi*y*cos(0.2*pi*x*y) - 0.2*pi*cos(0.5*pi*x) - 0.09*pi*cos(0.3*pi*y)'
[../]
[./vel_x_func]
type = ParsedFunction
value = '0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5'
[../]
[./vel_y_func]
type = ParsedFunction
value = '0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3'
[../]
[./p_func]
type = ParsedFunction
value = '0.5*sin(0.5*pi*x) + 1.0*sin(0.3*pi*y) + 0.5*sin(0.2*pi*x*y) + 0.5'
[../]
[./vxx_func]
type = ParsedFunction
value = '0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x)'
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 0
prop_names = 'rho mu'
prop_values = '${rho} ${mu}'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
num_steps = 10
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-8
nl_abs_tol = 1e-14
nl_max_its = 10
l_tol = 1e-6
l_max_its = 10
[./TimeStepper]
dt = .05
type = IterationAdaptiveDT
cutback_factor = 0.4
growth_factor = 1.2
optimal_iterations = 20
[../]
[]
[Outputs]
execute_on = 'final'
[./exodus]
type = Exodus
[../]
[./csv]
type = CSV
[../]
[]
[Postprocessors]
[./L2vel_x]
type = ElementL2Error
variable = vel_x
function = vel_x_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vel_y]
variable = vel_y
function = vel_y_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2p]
variable = p
function = p_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vxx]
variable = vxx
function = vxx_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
[AuxVariables]
[./vxx]
family = MONOMIAL
order = FIRST
[../]
[]
[AuxKernels]
[./vxx]
type = VariableGradientComponent
component = x
variable = vxx
gradient_variable = vel_x
[../]
[]
modules/combined/test/tests/thermo_mech/thermo_mech_smp_sm.i
[Mesh]
file = cube.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[BCs]
[./bottom_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./bottom_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 10.0
[../]
[]
[Materials]
[./constant]
type = LinearIsotropicMaterial
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
youngs_modulus = 1.0
poissons_ratio = .3
thermal_expansion = 1e-5
[../]
[./heat1]
type = HeatConductionMaterial
block = 1
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./density]
type = Density
block = 1
density = 1.0
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-14
l_tol = 1e-3
l_max_its = 100
dt = 1.0
end_time = 1.0
[]
[Outputs]
file_base = thermo_mech_smp_out
[./exodus]
type = Exodus
execute_on = 'initial timestep_end nonlinear'
nonlinear_residual_dt_divisor = 100
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template2_sm.i
[Mesh]
file = plane3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
tutorials/darcy_thermo_mech/step10_multiapps/problems/step10.i
[GlobalParams]
displacements = 'disp_r disp_z'
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 100
ymax = 0.304 # Length of test chamber
xmax = 0.0257 # Test chamber radius
[]
[Variables]
[pressure]
[]
[temperature]
initial_condition = 300 # Start at room temperature
[]
[]
[AuxVariables]
[k_eff]
initial_condition = 15.0 # water at 20C
[]
[velocity]
order = CONSTANT
family = MONOMIAL_VEC
[]
[]
[Modules/TensorMechanics/Master]
[all]
# This block adds all of the proper Kernels, strain calculators, and Variables
# for TensorMechanics in the correct coordinate system (autodetected)
add_variables = true
strain = FINITE
eigenstrain_names = eigenstrain
use_automatic_differentiation = true
generate_output = 'vonmises_stress elastic_strain_xx elastic_strain_yy strain_xx strain_yy'
[]
[]
[Kernels]
[darcy_pressure]
type = DarcyPressure
variable = pressure
[]
[heat_conduction]
type = ADHeatConduction
variable = temperature
[]
[heat_conduction_time_derivative]
type = ADHeatConductionTimeDerivative
variable = temperature
[]
[heat_convection]
type = DarcyAdvection
variable = temperature
pressure = pressure
[]
[]
[AuxKernels]
[velocity]
type = DarcyVelocity
variable = velocity
execute_on = timestep_end
pressure = pressure
[]
[]
[BCs]
[inlet]
type = DirichletBC
variable = pressure
boundary = bottom
value = 4000 # (Pa) From Figure 2 from paper. First data point for 1mm spheres.
[]
[outlet]
type = DirichletBC
variable = pressure
boundary = top
value = 0 # (Pa) Gives the correct pressure drop from Figure 2 for 1mm spheres
[]
[inlet_temperature]
type = FunctionDirichletBC
variable = temperature
boundary = bottom
function = 'if(t<0,350+50*t,350)'
[]
[outlet_temperature]
type = HeatConductionOutflow
variable = temperature
boundary = top
[]
[hold_inlet]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0
[]
[hold_center]
type = DirichletBC
variable = disp_r
boundary = left
value = 0
[]
[hold_outside]
type = DirichletBC
variable = disp_r
boundary = right
value = 0
[]
[]
[Materials]
viscosity_file = data/water_viscosity.csv
density_file = data/water_density.csv
specific_heat_file = data/water_specific_heat.csv
thermal_expansion_file = data/water_thermal_expansion.csv
[column]
type = PackedColumn
temperature = temperature
radius = 1
thermal_conductivity = k_eff # Use the AuxVariable instead of calculating
fluid_viscosity_file = ${viscosity_file}
fluid_density_file = ${density_file}
fluid_specific_heat_file = ${specific_heat_file}
fluid_thermal_expansion_file = ${thermal_expansion_file}
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 200e9 # (Pa) from wikipedia
poissons_ratio = .3 # from wikipedia
[]
[elastic_stress]
type = ADComputeFiniteStrainElasticStress
[]
[thermal_strain]
type = ADComputeThermalExpansionEigenstrain
stress_free_temperature = 300
thermal_expansion_coeff = 1e-6
eigenstrain_name = eigenstrain
temperature = temperature
[]
[]
[Postprocessors]
[average_temperature]
type = ElementAverageValue
variable = temperature
[]
[]
[Executioner]
type = Transient
start_time = -1
end_time = 200
steady_state_tolerance = 1e-7
steady_state_detection = true
dt = 0.25
solve_type = PJFNK
automatic_scaling = true
compute_scaling_once = false
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 500'
line_search = none
[TimeStepper]
type = FunctionDT
function = 'if(t<0,0.1,0.25)'
[]
[]
[MultiApps]
[micro]
type = TransientMultiApp
app_type = DarcyThermoMechApp
positions = '0.01285 0.0 0
0.01285 0.0608 0
0.01285 0.1216 0
0.01285 0.1824 0
0.01285 0.2432 0
0.01285 0.304 0'
input_files = step10_micro.i
execute_on = 'timestep_end'
[]
[]
[Transfers]
[keff_from_sub]
type = MultiAppPostprocessorInterpolationTransfer
direction = from_multiapp
multi_app = micro
variable = k_eff
power = 1
postprocessor = k_eff
execute_on = 'timestep_end'
[]
[temperature_to_sub]
type = MultiAppVariableValueSamplePostprocessorTransfer
direction = to_multiapp
multi_app = micro
source_variable = temperature
postprocessor = temperature_in
execute_on = 'timestep_end'
[]
[]
[Controls]
[multiapp]
type = TimePeriod
disable_objects = 'MultiApps::micro Transfers::keff_from_sub Transfers::temperature_to_sub'
start_time = '0'
execute_on = 'initial'
[]
[]
[Outputs]
[out]
type = Exodus
elemental_as_nodal = true
[]
[]
modules/phase_field/test/tests/MultiPhase/crosstermfreeenergy.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
nz = 0
xmin = -8
xmax = 8
ymin = -8
ymax = 8
elem_type = QUAD4
[]
[AuxVariables]
[./local_energy]
order = CONSTANT
family = MONOMIAL
[../]
[./cross_energy]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./local_free_energy]
type = TotalFreeEnergy
f_name = F0
variable = local_energy
additional_free_energy = cross_energy
[../]
[./cross_terms]
type = CrossTermGradientFreeEnergy
variable = cross_energy
interfacial_vars = 'eta1 eta2 eta3'
kappa_names = 'kappa11 kappa12 kappa13
kappa21 kappa22 kappa23
kappa31 kappa32 kappa33'
[../]
[]
[Variables]
[./eta1]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = SmoothCircleIC
x1 = 0.0
y1 = 5.0
radius = 5.0
invalue = 1.0
outvalue = 0.0
int_width = 10.0
[../]
[../]
[./eta2]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = SmoothCircleIC
x1 = -4.0
y1 = -2.0
radius = 5.0
invalue = 1.0
outvalue = 0.0
int_width = 10.0
[../]
[../]
[./eta3]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = SmoothCircleIC
x1 = 4.0
y1 = -2.0
radius = 5.0
invalue = 1.0
outvalue = 0.0
int_width = 10.0
[../]
[../]
[]
[Kernels]
[./dummy_diff1]
type = Diffusion
variable = eta1
[../]
[./dummy_time1]
type = TimeDerivative
variable = eta1
[../]
[./dummy_diff2]
type = Diffusion
variable = eta2
[../]
[./dummy_time2]
type = TimeDerivative
variable = eta2
[../]
[./dummy_diff3]
type = Diffusion
variable = eta3
[../]
[./dummy_tim3]
type = TimeDerivative
variable = eta3
[../]
[]
[Materials]
[./consts]
type = GenericConstantMaterial
prop_names = 'F0 kappa11 kappa12 kappa13 kappa21 kappa22 kappa23 kappa31 kappa32 kappa33'
prop_values = '0 11 12 13 12 22 23 13 23 33 '
[../]
[]
[Executioner]
type = Transient
dt = 0.001
num_steps = 1
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
hide = 'eta1 eta2 eta3 local_energy'
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_kinematic_dirac.i
# This is a dirac (contact formulation) version of glued_kinematic.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = glued
penalty = 1e+6
system = diracKernel
[../]
[]
test/tests/variables/time_derivatives_neighbor/test.i
[Mesh]
type = GeneratedMesh
dim = 1
xmin = 0
xmax = 4
nx = 2
[]
[Functions]
[a_fn]
type = ParsedFunction
value = 't*(t+x)'
[]
[]
[AuxVariables]
[a]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[a_ak]
type = FunctionAux
variable = a
function = a_fn
[]
[]
[Materials]
[cm]
type = CoupledValuesMaterial
variable = a
[]
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[td]
type = TimeDerivative
variable = u
[]
[]
[DGKernels]
[dgk]
type = MatDGKernel
variable = u
mat_prop = a_value
[]
[]
[Executioner]
type = Transient
dt = 1
num_steps = 3
[TimeIntegrator]
type = NewmarkBeta
[]
[Quadrature]
type = GAUSS
order = FIRST
[]
[]
[Outputs]
[./out]
type = Exodus
output_material_properties = true
show_material_properties = 'a_value a_dot a_dot_dot a_dot_du a_dot_dot_du'
[../]
[]
modules/solid_mechanics/test/tests/penalty_dirichlet/penalty_dirichlet.i
#This tests the PenaltyDirichletBC and PenaltyFunctionDirichletBC on
#a simple solid mechanics problem. A unit cube of material has
#penalty BCs on the left and right hand side. The penalty for both of
#those BCs is the same as the stiffness of the block in that direction,
#so the compliance is due to the left BC, block, and right BC in equal
#portions. As a result, the displacement on the left side is 1/3 the
#displacement imposed by the function, and on the right side it is 2/3
#that value.
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 1.0
nx = 2
ny = 2
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
tensor = stress
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
variable = stress_yy
tensor = stress
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
tensor = stress
index = 2
[../]
[]
[Functions]
[./pull]
type = PiecewiseLinear
xy_data = '0 0
1 0.001'
[../]
[]
[BCs]
[./left_x]
type = PenaltyDirichletBC
variable = disp_x
boundary = left
value = 0.0
penalty = 1e4
[../]
[./right_x]
type = FunctionPenaltyDirichletBC
variable = disp_x
boundary = right
function = pull
penalty = 1e4
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[]
[Materials]
[./solid]
type = Elastic
block = 0
disp_x = disp_x
disp_y = disp_y
youngs_modulus = 1e4
poissons_ratio = 0.0
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew '
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type'
petsc_options_value = '101 hypre boomeramg'
nl_rel_tol = 1e-12
l_tol = 1e-5
start_time = 0.0
dt = 1
num_steps = 1
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
[../]
[]
test/tests/auxkernels/nodal_aux_var/nodal_sort_test.i
[Mesh]
file = square.e
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./one]
order = FIRST
family = LAGRANGE
initial_condition = 0
[../]
[./two]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
# Intentionally out of order to test sorting capabiilties
active = 'one two'
[./two]
variable = two
type = CoupledAux
value = 2
operator = '/'
coupled = one
[../]
[./one]
variable = one
type = ConstantAux
value = 1
[../]
[./five]
type = ConstantAux
variable = five
boundary = '1 2'
value = 5
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/auxkernels/element_aux_var/l2_element_aux_var_test.i
[Mesh]
file = square.e
second_order = true
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./l2_lagrange]
order = FIRST
family = L2_LAGRANGE
[../]
[./l2_hierarchic]
order = FIRST
family = L2_HIERARCHIC
[../]
[./one]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
# Coupling of nonlinear to Aux
[./diff]
type = Diffusion
variable = u
[../]
[./force]
type = CoupledForce
variable = u
v = one
[../]
[]
[AuxKernels]
[./coupled_l2_lagrange]
variable = l2_lagrange
type = CoupledAux
value = 2
operator = +
coupled = u
execute_on = 'initial timestep_end'
[../]
[./coupled_l2_hierarchic]
variable = l2_hierarchic
type = CoupledAux
value = 2
operator = +
coupled = u
execute_on = 'initial timestep_end'
[../]
[./constant]
variable = one
type = ConstantAux
value = 1
execute_on = 'initial timestep_end'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Postprocessors]
[./int2_u]
type = ElementL2Norm
variable = u
execute_on = 'initial timestep_end'
[../]
[./int2_l2_lagrange]
type = ElementL2Norm
variable = l2_lagrange
execute_on = 'initial timestep_end'
[../]
[./int2_l2_hierarchic]
type = ElementL2Norm
variable = l2_hierarchic
execute_on = 'initial timestep_end'
[../]
[./int_u]
type = ElementIntegralVariablePostprocessor
variable = u
execute_on = 'initial timestep_end'
[../]
[./int_l2_lagrange]
type = ElementIntegralVariablePostprocessor
variable = l2_lagrange
execute_on = 'initial timestep_end'
[../]
[./int_l2_hierarchic]
type = ElementIntegralVariablePostprocessor
variable = l2_hierarchic
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./ex_out]
type = Exodus
file_base = l2elemaux
elemental_as_nodal = true
[../]
[]
modules/porous_flow/test/tests/sinks/s10.i
# apply a basic sink fluxes to all boundaries.
# Sink strength = S kg.m^-2.s^-1
#
# Use fully-saturated physics, with no flow
# (permeability is zero).
# Each finite element is (2m)^3 in size, and
# porosity is 0.125, so each element holds 1 m^3
# of fluid.
# With density = 10 exp(pp)
# then each element holds 10 exp(pp) kg of fluid
#
# Each boundary node that is away from other boundaries
# (ie, not on a mesh corner or edge) therefore holds
# 5 exp(pp)
# kg of fluid, which is just density * porosity * volume_of_node
#
# Each of such nodes are exposed to a sink flux of strength
# S * A
# where A is the area controlled by the node (in this case 4 m^2)
#
# So d(5 exp(pp))/dt = -4S, ie
# exp(pp) = exp(pp0) - 0.8 * S * t
#
# This is therefore similar to s01.i . However, this test is
# run 6 times: one for each boundary. The purpose of this is
# to ensure that the PorousFlowSink BC removes fluid from the
# correct nodes. This is nontrivial because of the upwinding
# and storing of Material Properties at nodes.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 5
ny = 5
nz = 5
xmin = 0
xmax = 10
ymin = 0
ymax = 10
zmin = 0
zmax = 10
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[../]
[]
[Variables]
[./pp]
initial_condition = 1
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 10
thermal_expansion = 0
viscosity = 11
[../]
[../]
[]
[Materials]
[./temperature]
type = PorousFlowTemperature
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[../]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.125
[../]
[]
[BCs]
[./flux]
type = PorousFlowSink
boundary = left
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.25
end_time = 1
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s10
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[]
modules/combined/test/tests/simple_contact/sm/simple_contact_rz_dirac_test_sm.i
#
# The analytic solution is:
# disp_x = -7e-5 * x
# disp_y = 6e-5 * y
# stress_xx = stress_zz = -100
# stress_yy = stress_xy = 0
#
# Note: Run merged_rz.i to generate a solution to compare to that doesn't use contact.
[Mesh]
file = contact_rz.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Problem]
coord_type = RZ
[]
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0 1'
y = '0 1'
scale_factor = 100
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
system = DiracKernel
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 10
value = 0.0
[../]
[./Pressure]
[./right_pressure]
boundary = 4
function = pressure
disp_x = disp_x
disp_y = disp_y
[../]
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
formulation = NonlinearRZ
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff2]
type = Elastic
formulation = NonlinearRZ
block = 2
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-9
l_max_its = 20
dt = 1.0
end_time = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/error/duplicate_output_files.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
file_base = duplicate_output_files_out
[../]
[./exodus_two]
type = Exodus
file_base = duplicate_output_files_out
[../]
[]
test/tests/executioners/transient_sync_time/transient_time_interval_output_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[Functions]
[./bc_func]
type = ParsedFunction
value = sin(pi*0.1*x*t)
[../]
# Laplacian of the function above
[./interior_func]
type = ParsedFunction
value = 0.01*pi*pi*t*t*sin(0.1*pi*x*t)
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = interior_func
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = bc_func
[../]
[]
[Executioner]
type = Transient
dt = 1
start_time = 0
num_steps = 10
# These times will be sync'd in the output
[]
[Outputs]
execute_on = 'timestep_end'
file_base = out_tio
interval = 3
csv = true
[./exodus]
type = Exodus
execute_on = 'final timestep_end'
[../]
[]
modules/combined/test/tests/elastic_patch/elastic_patch_rz_sm.i
#
# This problem is taken from the Abaqus verification manual:
# "1.5.4 Patch test for axisymmetric elements"
# The stress solution is given as:
# xx = yy = zz = 2000
# xy = 400
#
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_patch_rz.e
[]
[Functions]
[./ur]
type = ParsedFunction
value = '1e-3*x'
[../]
[./uz]
type = ParsedFunction
value = '1e-3*(x+y)'
[../]
[./body]
type = ParsedFunction
value = '-400/x'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./temp]
initial_condition = 117.56
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
use_displaced_mesh = false
[../]
[]
[Kernels]
[./body]
type = BodyForce
variable = disp_y
value = 1
function = body
[../]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 10
function = ur
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 10
function = uz
[../]
[./temp]
type = DirichletBC
variable = temp
boundary = 10
value = 117.56
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.25
temp = temp
[../]
[./heat]
type = HeatConductionMaterial
block = 1
specific_heat = 0.116
thermal_conductivity = 4.85e-4
[../]
[./density]
type = Density
block = 1
density = 0.283
outputs = all
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = elastic_patch_rz_out
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictionless_penalty_contact_line_search.i
# This is a benchmark test that checks constraint based frictionless
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[./tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = nonlinear_its
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-ksp_monitor_true_residual'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'contact'
contact_line_search_ltol = .5
contact_line_search_allowed_lambda_cuts = 0
l_max_its = 100
nl_max_its = 20
dt = 0.1
end_time = 3
# num_steps = 30
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[]
[Outputs]
perf_graph = true
print_linear_residuals = false
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template1_sm.i
[Mesh]
file = ring2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/navier_stokes/test/tests/scalar_adr/supg/advection_error_testing.i
velocity=1
[GlobalParams]
u = ${velocity}
p = 0
tau_type = mod
[]
[Mesh]
type = GeneratedMesh
dim = 1
nx = 4
xmax = 1
elem_type = EDGE2
[]
[Variables]
[./c]
family = LAGRANGE
order = FIRST
[../]
[]
[Kernels]
[./adv]
type = Advection
variable = c
forcing_func = 'ffn'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = c
boundary = left
value = 0
[../]
[]
[Materials]
[./mat]
type = GenericConstantMaterial
prop_names = 'mu rho'
prop_values = '0 1'
[../]
[]
[Functions]
[./ffn]
type = ParsedFunction
value = '1-x^2'
[../]
[./c_func]
type = ParsedFunction
value = 'x-x^3/3'
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[]
[Outputs]
[./exodus]
type = Exodus
[../]
[./csv]
type = CSV
[../]
[]
[Postprocessors]
[./L2c]
type = ElementL2Error
variable = c
function = c_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2cx]
type = ElementL2Error
variable = cx
function = ffn
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
[AuxVariables]
[./cx]
family = MONOMIAL
order = FIRST
[../]
[]
[AuxKernels]
[./cx]
type = VariableGradientComponent
component = x
variable = cx
gradient_variable = c
[../]
[]
modules/combined/test/tests/solid_mechanics/pressure/pressure_test.i
#
# Pressure Test
#
# This test is designed to compute pressure loads on three faces of a unit cube.
#
# The mesh is composed of one block with a single element. Symmetry bcs are
# applied to the faces opposite the pressures. Poisson's ratio is zero,
# which makes it trivial to check displacements.
#
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y disp_z'
disp_z = disp_z
[../]
[Mesh]#Comment
file = pressure_test.e
[] # Mesh
[Functions]
[./rampConstant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1.0
[../]
[./zeroRamp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0. 1.'
scale_factor = 2.0
[../]
[./rampUnramp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 0.'
scale_factor = 10.0
[../]
[] # Functions
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = SMALL
[]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./Pressure]
[./Side1]
boundary = 1
function = rampConstant
[../]
[./Side2]
boundary = 2
function = zeroRamp
[../]
[./Side3]
boundary = 3
function = rampUnramp
[../]
[../]
[] # BCs
[Materials]
[./constant]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e6
poissons_ratio = 0.0
[../]
[./constant_stress]
type = ComputeLinearElasticStress
block = '1'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/simple_contact/simple_contact_rz_dirac_test.i
#
# The analytic solution is:
# disp_x = -7e-5 * x
# disp_y = 6e-5 * y
# stress_xx = stress_zz = -100
# stress_yy = stress_xy = 0
#
# Note: Run merged_rz.i to generate a solution to compare to that doesn't use contact.
[Mesh]
file = contact_rz.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0 1'
y = '0 1'
scale_factor = 100
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
incremental = true
strain = FINITE
generate_output = 'stress_xx stress_xy stress_zx stress_yy stress_zz stress_yz'
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
system = DiracKernel
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 10
value = 0.0
[../]
[./Pressure]
[./right_pressure]
boundary = 4
function = pressure
disp_x = disp_x
disp_y = disp_y
[../]
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-9
l_max_its = 20
dt = 1.0
end_time = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/tensor_mechanics/test/tests/2D_different_planes/gps_xy.i
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = square_xy_plane.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./scalar_strain_zz]
order = FIRST
family = SCALAR
[../]
[]
[AuxVariables]
[./temp]
[../]
[]
[Modules/TensorMechanics/Master]
[./generalized_plane_strain]
block = 1
strain = SMALL
scalar_out_of_plane_strain = scalar_strain_zz
out_of_plane_direction = z
planar_formulation = GENERALIZED_PLANE_STRAIN
eigenstrain_names = 'eigenstrain'
generate_output = 'stress_xx stress_xy stress_yy stress_zz strain_xx strain_xy strain_yy strain_zz'
[../]
[]
[AuxKernels]
[./tempfuncaux]
type = FunctionAux
variable = temp
function = tempfunc
[../]
[]
[Functions]
[./tempfunc]
type = ParsedFunction
value = '(1-x)*t'
[../]
[]
[BCs]
[./bottomx]
type = DirichletBC
boundary = 3
variable = disp_x
value = 0.0
[../]
[./bottomy]
type = DirichletBC
boundary = 3
variable = disp_y
value = 0.0
[../]
[]
[Materials]
[./elastic_stress]
type = ComputeLinearElasticStress
block = 1
[../]
[./thermal_strain]
type = ComputeThermalExpansionEigenstrain
temperature = temp
thermal_expansion_coeff = 0.02
stress_free_temperature = 0.5
eigenstrain_name = eigenstrain
[../]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = 1
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Postprocessors]
[./react_z]
type = MaterialTensorIntegral
use_displaced_mesh = false
rank_two_tensor = stress
index_i = 2
index_j = 2
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
line_search = none
# controls for linear iterations
l_max_its = 100
l_tol = 1e-10
# controls for nonlinear iterations
nl_max_its = 10
nl_rel_tol = 1e-12
# time control
start_time = 0.0
dt = 1.0
dtmin = 1.0
end_time = 2.0
[]
[Outputs]
file_base = gps_xy_small_out
[./exodus]
type = Exodus
[../]
[]
modules/phase_field/test/tests/mobility_derivative/mobility_derivative_direct_coupled_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
xmax = 30
ymax = 30
elem_type = QUAD4
[]
[Variables]
[./c]
family = HERMITE
order = THIRD
[../]
[./d]
[../]
[]
[ICs]
[./c_IC]
type = SmoothCircleIC
x1 = 15
y1 = 15
radius = 12
variable = c
int_width = 3
invalue = 1
outvalue = 0
[../]
[./d_IC]
type = BoundingBoxIC
x1 = 0
x2 = 15
y1 = 0
y2 = 30
inside = 1.0
outside = 0.0
variable = d
[../]
[]
[Kernels]
[./c_bulk]
type = CahnHilliard
variable = c
mob_name = M
f_name = F
args = d
[../]
[./c_int]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
args = d
[../]
[./c_dot]
type = TimeDerivative
variable = c
[../]
[./d_dot]
type = TimeDerivative
variable = d
[../]
[./d_diff]
type = MatDiffusion
variable = d
diffusivity = diffusivity
[../]
[]
[Materials]
[./kappa]
type = GenericConstantMaterial
prop_names = kappa_c
prop_values = 2.0
[../]
[./mob]
type = DerivativeParsedMaterial
f_name = M
args = 'c d'
function = if(d>0.001,d,0.001)*if(c<0,0.5,if(c>1,0.5,1-0.5*c^2))
derivative_order = 2
[../]
[./free_energy]
type = MathEBFreeEnergy
f_name = F
c = c
[../]
[./d_diff]
type = GenericConstantMaterial
prop_names = diffusivity
prop_values = 1.0
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
scheme = BDF2
solve_type = NEWTON
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -pc_asm_overlap'
petsc_options_value = 'asm 31 lu 1'
l_max_its = 30
l_tol = 1.0e-4
nl_max_its = 50
nl_rel_tol = 1.0e-10
dt = 0.25
num_steps = 2
[]
[Outputs]
execute_on = 'timestep_end'
[./oversample]
refinements = 2
type = Exodus
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring1_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/materials/material/material_test.i
###########################################################
# This is a simple test of the Material System. A
# user-defined Material (MTMaterial) is providing a
# Real property named "matp" that varies spatially
# throughout the domain. This property is used as a
# coefficient by MatDiffusionTest. It is also output
# by MaterialRealAux for visualization purposes.
#
# @Requirement F4.10
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 4
ny = 4
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./mat]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./diff]
type = MatDiffusionTest
variable = u
prop_name = matp
[../]
[]
[AuxKernels]
[./mat]
type = MaterialRealAux
variable = mat
property = matp
execute_on = timestep_end
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 1
[../]
[./right]
type = MTBC
variable = u
boundary = 1
grad = 8
prop_name = matp
[../]
[]
# Materials System
[Materials]
[./mat]
type = MTMaterial
block = 0
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_penalty_dirac_sm.i
# This is a dirac (contact formulation) version of frictionless_penalty.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = frictionless
formulation = penalty
penalty = 1e+7
system = dirackernel
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_kinematic_dirac_sm.i
# This is a dirac (contact formulation) version of glued_kinematic.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = glued
penalty = 1e+6
system = dirackernel
[../]
[]
modules/tensor_mechanics/test/tests/recompute_radial_return/uniaxial_viscoplasticity_incrementalstrain.i
# This is a test of the HyperbolicViscoplasticityStressUpdate model
# using the small strain formulation. The material is a visco-plastic material
# i.e. a time-dependent linear strain hardening plasticity model.
# A similar problem was run in Abaqus with exactly the same result, although the element
# used in the Abaqus simulation was a CAX4 element. Neverthless, due to the boundary conditions
# and load, the MOOSE and Abaqus result are the same.
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = 1x1x1cube.e
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t/100
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = SMALL
incremental = true
add_variables = true
generate_output = 'stress_yy plastic_strain_xx plastic_strain_yy plastic_strain_zz'
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1000.0
poissons_ratio = 0.3
[../]
[./viscoplasticity]
type = HyperbolicViscoplasticityStressUpdate
yield_stress = 10.0
hardening_constant = 100.0
c_alpha = 0.2418e-6
c_beta = 0.1135
[../]
[./radial_return_stress]
type = ComputeMultipleInelasticStress
inelastic_models = 'viscoplasticity'
tangent_operator = elastic
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
line_search = none
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
num_steps = 30
dt = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template2_sm.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[Mesh]
file = cyl1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/contact/test/tests/bouncing-block-contact/frictionless-nodal-reduced-active-set.i
starting_point = .5
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1
[]
[Mesh]
file = square-blocks-no-offset.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[ICs]
[./disp_y]
block = 2
variable = disp_y
value = ${starting_point}
type = ConstantIC
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[Constraints]
[./disp_x]
type = RANFSNormalMechanicalContact
slave = 10
master = 20
variable = disp_x
master_variable = disp_x
component = x
[../]
[./disp_y]
type = RANFSNormalMechanicalContact
slave = 10
master = 20
variable = disp_y
master_variable = disp_y
component = y
[../]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
preset = false
boundary = 40
value = 0.0
[../]
[./topx]
type = DirichletBC
variable = disp_x
preset = false
boundary = 30
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
preset = false
boundary = 40
value = 0.0
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = 30
function = '${starting_point} - t'
[../]
[]
[Executioner]
type = Transient
num_steps = 1
dt = 1
dtmin = 1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -ksp_monitor_true_residual -snes_view'
petsc_options_iname = '-mat_mffd_err -pc_type -pc_hypre_type'
petsc_options_value = '1e-5 hypre boomeramg'
l_max_its = 30
nl_max_its = 20
line_search = 'project'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[exo]
type = Exodus
execute_on = 'nonlinear'
[]
print_linear_residuals = false
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[]
test/tests/variables/fe_monomial_const/monomial-const-3d.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
nx = 21
ny = 21
nz = 21
elem_type = HEX8
[]
[Functions]
[./bc_fn]
type=ParsedFunction
value=0
[../]
[./bc_fnt]
type = ParsedFunction
value = 0
[../]
[./bc_fnb]
type = ParsedFunction
value = 0
[../]
[./bc_fnl]
type = ParsedFunction
value = 0
[../]
[./bc_fnr]
type = ParsedFunction
value = 0
[../]
[./forcing_fn]
# type = ParsedFunction
# value = 0
type = MTPiecewiseConst3D
[../]
[./solution]
type = MTPiecewiseConst3D
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
# Note: MOOSE's DirichletBCs do not work properly with shape functions that do not
# have DOFs at the element edges. This test works because the solution
# has been designed to be zero at the boundary which is satisfied by the IC
# Ticket #1352
active = ''
[./bc_all]
type=FunctionDirichletBC
variable = u
boundary = 'top bottom left right'
function = bc_fn
[../]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1.e-9
[./Adaptivity]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/simple_contact/sm/simple_contact_rz_test_sm.i
#
# The analytic solution is:
# disp_x = -7e-5 * x
# disp_y = 6e-5 * y
# stress_xx = stress_zz = -100
# stress_yy = stress_xy = 0
#
# Note: Run merged_rz.i to generate a solution to compare to that doesn't use contact.
[Mesh]
file = contact_rz.e
# PETSc < 3.5.0 requires the iteration patch_update_strategy to
# avoid PenetrationLocator warnings, which are currently treated as
# errors by the TestHarness.
patch_update_strategy = 'iteration'
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Problem]
coord_type = RZ
[]
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0 1'
y = '0 1'
scale_factor = 100
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Contact]
[./dummy_name]
master = 3
slave = 2
penalty = 1e5
system = constraint
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 10
value = 0.0
[../]
[./Pressure]
[./right_pressure]
boundary = 4
function = pressure
disp_x = disp_x
disp_y = disp_y
[../]
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
formulation = NonlinearRZ
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff2]
type = Elastic
formulation = NonlinearRZ
block = 2
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-9
l_max_its = 20
dt = 1.0
end_time = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/elastic_patch/elastic_patch_rz.i
#
# This problem is taken from the Abaqus verification manual:
# "1.5.4 Patch test for axisymmetric elements"
# The stress solution is given as:
# xx = yy = zz = 2000
# xy = 400
#
# Since the strain is 1e-3 in all three directions, the new density should be
# new_density = original_density * V_0 / V
# new_density = 0.283 / (1 + 1e-3 + 1e-3 + 1e-3) = 0.282153
[GlobalParams]
displacements = 'disp_x disp_y'
temperature = temp
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_patch_rz.e
[]
[Variables]
[./temp]
initial_condition = 117.56
[../]
[]
[Modules/TensorMechanics/Master/All]
strain = SMALL
incremental = true
add_variables = true
generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx'
[]
[Kernels]
[./body]
type = BodyForce
variable = disp_y
value = 1
function = '-400/x'
[../]
[./heat]
type = TimeDerivative
variable = temp
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 10
function = '1e-3*x'
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 10
function = '1e-3*(x+y)'
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
poissons_ratio = 0.25
[../]
[./stress]
type = ComputeStrainIncrementBasedStress
[../]
[./density]
type = Density
density = 0.283
outputs = all
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
end_time = 1.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/tensor_mechanics/test/tests/coupled_pressure/coupled_pressure_test.i
#
# Pressure Test
#
# This test is designed to compute pressure loads on three faces of a unit cube.
# The pressure is computed as an auxiliary variable. It should give the same result
# as pressure_test.i
#
# The mesh is composed of one block with a single element. Symmetry bcs are
# applied to the faces opposite the pressures. Poisson's ratio is zero,
# which makes it trivial to check displacements.
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
type = FileMesh
file = pressure_test.e
[]
[Functions]
[./rampConstant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1.0
[../]
[./zeroRamp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0. 1.'
scale_factor = 2.0
[../]
[./rampUnramp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 0.'
scale_factor = 10.0
[../]
[]
[AuxVariables]
[./pressure_1]
[../]
[./pressure_2]
[../]
[./pressure_3]
[../]
[]
[AuxKernels]
[./side1_pressure_ak]
type = FunctionAux
variable = pressure_1
boundary = 1
function = rampConstant
[../]
[./side2_pressure_ak]
type = FunctionAux
variable = pressure_2
boundary = 2
function = zeroRamp
[../]
[./side3_pressure_ak]
type = FunctionAux
variable = pressure_3
boundary = 3
function = rampUnramp
[../]
[]
[Modules]
[./TensorMechanics]
[./Master]
[./all]
strain = SMALL
add_variables = true
[../]
[../]
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./CoupledPressure]
[./Side1]
boundary = '1'
pressure = pressure_1
displacements = 'disp_x disp_y disp_z'
[../]
[./Side2]
boundary = '2'
pressure = pressure_2
displacements = 'disp_x disp_y disp_z'
[../]
[../]
[./side3_x]
type = CoupledPressureBC
variable = 'disp_x'
boundary = '3'
pressure = pressure_3
component = 0
[../]
[./side3_y]
type = CoupledPressureBC
variable = 'disp_y'
boundary = '3'
pressure = pressure_3
component = 1
[../]
[./side3_z]
type = CoupledPressureBC
variable = 'disp_z'
boundary = '3'
pressure = pressure_3
component = 2
[../]
[]
[Materials]
[./Elasticity_tensor]
type = ComputeElasticityTensor
fill_method = symmetric_isotropic
C_ijkl = '0 0.5e6'
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/exodus/invalid_hide_variables.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[AuxVariables]
[./aux0]
order = SECOND
family = SCALAR
[../]
[./aux1]
family = SCALAR
initial_condition = 5
[../]
[./aux2]
family = SCALAR
initial_condition = 10
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./diff_v]
type = CoefDiffusion
variable = v
coef = 2
[../]
[]
[BCs]
[./right_u]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_u]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = right
value = 3
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = left
value = 2
[../]
[]
[Postprocessors]
[./num_vars]
type = NumVars
system = 'NL'
[../]
[./num_aux]
type = NumVars
system = 'AUX'
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
hide = 'aux27 v num_aux'
[../]
[]
[ICs]
[./aux0_IC]
variable = aux0
values = '12 13'
type = ScalarComponentIC
[../]
[]
test/tests/outputs/intervals/multiple_sync_times.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus_3]
type = Exodus
interval = 3
file_base = multiple_sync_times_out_3
[../]
[./exodus_5]
type = Exodus
interval = 5
file_base = multiple_sync_times_out_5
[../]
[./exodus_sync_0]
type = Exodus
sync_times = '0.45 0.525 0.6'
sync_only = true
file_base = multiple_sync_times_sync_0
[../]
[./exodus_sync_1]
type = Exodus
sync_times = '0.475 0.485'
file_base = multiple_sync_times_sync_1
[../]
[]
modules/combined/test/tests/gravity/gravity_hex20.i
# Gravity Test
#
# This test is designed to exercise the gravity body force kernel.
#
# The mesh for this problem is a rectangular bar 10 units by 1 unit
# by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero on each of side that faces a negative
# coordinate direction. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(x) = -b*x^2/(2*E)+b*L*x/E
#
# The displacement at x=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(x) = b*(L-x)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at x=0. The stress
# is reported at element centers. The element closest to x=0 sits
# at x = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at x = L where the stress is zero analytically. The nearest
# element is at x=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
order = SECOND
family = LAGRANGE
[]
[Mesh]
file = gravity_hex20_test.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Modules/TensorMechanics/Master/All]
strain = FINITE
add_variables = true
generate_output = 'stress_xx'
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_x
value = 20
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 5
value = 0.0
[../]
[]
[Materials]
[./elasticty_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
bulk_modulus = 0.333333333333333e6
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./density]
type = Density
density = 2
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[./Quadrature]
order = THIRD
[../]
[]
[Outputs]
file_base = gravity_hex20_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/wli02.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 50
ny = 1
xmin = -1000
xmax = 0
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[../]
[]
[Variables]
[./pressure]
initial_condition = -1E-4
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./base]
type = DirichletBC
boundary = 'left'
value = -1E-4
variable = pressure
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '-1000 0 0'
end_point = '0 0 0'
sort_by = x
num_points = 71
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 100
dt = 5
[]
[Outputs]
file_base = wli02
sync_times = '100 500 1000'
[./exodus]
type = Exodus
sync_only = true
[../]
[./along_line]
type = CSV
sync_only = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_template2.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl1_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template2.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane1_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/rd03.i
[Mesh]
file = gold/rd02.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '2E4 1E6'
x = '0 1E6'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[../]
[]
[Variables]
[./pressure]
initial_from_file_timestep = LATEST
initial_from_file_var = pressure
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./base]
type = DirichletBC
boundary = left
value = 0.0
variable = pressure
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 8.2944E6
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = rd03
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[./along_line]
type = CSV
execute_on = final
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template1_sm.i
[Mesh]
file = cyl4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/kernels/vector_dot_dot/vector_test.i
# Tests calculation of first and second time derivative
# of a coupled vector variable in a material
# a_vec(x,y,z,t) = [t*(t*x + y), t*y, 0]
# a_vec_dot(x,y,z,t) = [2*t*x + y, y, 0]
# a_vec_dot_dot(x,y,z,t) = [2*x, 0, 0]
#
# IMPORTANT NOTE:
# Currently, this test produces a_vec_dot and a_vec_dot_dot that contains oscillations over time.
# This is a known by-product of Newmark Beta time integration (see the Newmark Beta documentation),
# but as of Summer 2019, there is no alternative time integrator in MOOSE that can dampen these
# oscillations. This test is used as coverage for the function call coupledVectorDotDot.
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 4
ymin = 0
ymax = 4
nx = 8
ny = 8
[]
[Functions]
[a_fn]
type = ParsedVectorFunction
value_x = 't * (t * x + y)'
value_y = 't * y'
value_z = 0
[]
[]
[AuxVariables]
[a]
family = LAGRANGE_VEC
order = FIRST
[]
[]
[AuxKernels]
[a_ak]
type = VectorFunctionAux
variable = a
function = a_fn
[]
[]
[Materials]
[cm]
type = VectorCoupledValuesMaterial
variable = a
[]
[]
[Variables]
[u] # u is zero
family = LAGRANGE_VEC
order = FIRST
[]
[]
[Kernels]
[td]
type = VectorTimeDerivative
variable = u
[]
[]
[Executioner]
type = Transient
dt = 1
num_steps = 3
[TimeIntegrator]
type = NewmarkBeta
[]
[]
[Outputs]
[./out]
type = Exodus
output_material_properties = true
show_material_properties = 'a_value a_dot a_dot_dot a_dot_du a_dot_dot_du'
[../]
[]
modules/richards/test/tests/uo_egs/seff1.i
# Outputs a effective saturation relationship into an exodus file
# and into a CSV file.
# In the exodus file, the Seff will be a function of "x", and
# this "x" is actually porepressure
# In the CSV file you will find the Seff at the "x" point
# specified by you below.
#
# You may specify:
# - the "type" of Seff in the UserObjects block
# - the parameters of this Seff function in the UserObjects block
# - the "x" point (which is porepressure) that you want to extract
# the Seff at, if you want a value at a particular point
# - the range of "x" values (which is porepressure values) may be
# changed in the Mesh block, below
[UserObjects]
[./seff]
type = RichardsSeff1VG
al = 1E-6
m = 0.8
[../]
[]
[Postprocessors]
[./point_val]
type = PointValue
execute_on = timestep_begin
# note this point must lie inside the mesh below
point = '-1 0 0'
variable = seff
[../]
[]
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
# the following specify the range of porepressure
xmin = -3E6
xmax = 1E5
[]
############################
# You should not need to change any of the stuff below
############################
[Variables]
[./u]
[../]
[]
[ICs]
[./u_init]
type = FunctionIC
variable = u
function = x
[../]
[]
[AuxVariables]
[./seff]
[../]
[]
[AuxKernels]
[./seff_AuxK]
type = RichardsSeffAux
variable = seff
seff_UO = seff
execute_on = timestep_begin
pressure_vars = u
[../]
[]
[Kernels]
[./dummy]
type = Diffusion
variable = u
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 0
[]
[Outputs]
file_base = seff1
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = u
[../]
[]
modules/phase_field/test/tests/initial_conditions/SmoothSuperellipsoidIC.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = SmoothSuperellipsoidIC
variable = c
x1 = 25.0
y1 = 25.0
a = 8.0
b = 12.0
n = 3.5
invalue = 1.0
outvalue = -0.8
int_width = 4.0
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CHMath
variable = c
mob_name = M
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-4
nl_max_its = 40
nl_rel_tol = 1e-9
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
exodus = false
[./out]
type = Exodus
refinements = 2
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/wli01.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = -10000
xmax = 0
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[../]
[]
[Variables]
[./pressure]
initial_condition = -1E-4
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./base]
type = DirichletBC
boundary = 'left'
value = -1E-4
variable = pressure
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '-5000 0 0'
end_point = '0 0 0'
sort_by = x
num_points = 71
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 1000
dt = 1
[]
[Outputs]
file_base = wli01
sync_times = '100 500 1000'
[./exodus]
type = Exodus
sync_only = true
[../]
[./along_line]
type = CSV
sync_only = true
[../]
[]
modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sliding_elastic_blocks_2d.i
[Mesh]
file = sliding_elastic_blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
save_in = 'saved_x saved_y'
diag_save_in = 'diag_saved_x diag_saved_y'
[../]
[]
[AuxKernels]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
quantity = incremental_slip_x
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
quantity = incremental_slip_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip]
type = PenetrationAux
variable = accum_slip
execute_on = timestep_end
quantity = accumulated_slip
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_x]
type = PenetrationAux
variable = tang_force_x
execute_on = timestep_end
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_y]
type = PenetrationAux
variable = tang_force_y
execute_on = timestep_end
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.005
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.05
num_steps = 1000
nl_rel_tol = 1e-16
nl_abs_tol = 1e-09
dtmin = 0.01
l_tol = 1e-3
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
file_base = sliding_elastic_blocks_2d_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
system = constraint
friction_coefficient = '0.25'
penalty = 1e6
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
slave = 3
master = 2
[../]
[]
test/tests/transfers/transfer_on_final/sub.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[u]
initial_condition = 10
[]
[]
[AuxVariables]
[v]
initial_condition = 20
[]
[]
[Kernels]
[time]
type = TimeDerivative
variable = u
[]
[diff]
type = Diffusion
variable = u
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 10
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 20
[]
[]
[Executioner]
type = Transient
num_steps = 4
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[final]
type = Exodus
execute_on = 'FINAL'
execute_input_on = 'NONE' # This is needed to avoid problems with creating a file w/o data during --recover testing
[]
[]
modules/phase_field/examples/interfacekernels/interface_gradient.i
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 50
ny = 50
[]
[./box1]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 0'
top_right = '0.51 1 0'
[../]
[./box2]
input = box1
type = SubdomainBoundingBoxGenerator
block_id = 2
bottom_left = '0.49 0 0'
top_right = '1 1 0'
[../]
[./iface]
type = SideSetsBetweenSubdomainsGenerator
master_block = 1
paired_block = 2
new_boundary = 10
input = box2
[../]
[./rotate]
type = TransformGenerator
transform = ROTATE
vector_value = '5 0 0'
input = iface
[../]
[]
[GlobalParams]
order = FIRST
family = LAGRANGE
[]
[Variables]
[./u]
block = 1
[./InitialCondition]
type = FunctionIC
function = 'r:=sqrt((x-0.4)^2+(y-0.5)^2);if(r<0.05,5,1)'
[../]
[../]
[./v]
block = 2
initial_condition = 0.8
[../]
[]
[Kernels]
[./u_diff]
type = Diffusion
variable = u
block = 1
[../]
[./u_dt]
type = TimeDerivative
variable = u
block = 1
[../]
[./v_diff]
type = Diffusion
variable = v
block = 2
[../]
[./v_dt]
type = TimeDerivative
variable = v
block = 2
[../]
[]
[InterfaceKernels]
[./flux_continuity]
type = InterfaceDiffusionFluxMatch
variable = u
boundary = 10
neighbor_var = v
[../]
[./diffusion_surface_term]
type = InterfaceDiffusionBoundaryTerm
boundary = 10
variable = u
neighbor_var = v
[../]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
dt = 0.001
num_steps = 20
[]
[Outputs]
[./out]
type = Exodus
use_problem_dimension = false
[../]
print_linear_residuals = false
[]
modules/porous_flow/test/tests/infiltration_and_drainage/bw01.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 400
ny = 1
xmin = -10
xmax = 10
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-5 1E-2 1E-2 1E-1'
x = '0 1E-5 1 10'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[../]
[]
[Variables]
[./pressure]
initial_condition = -9E2
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./recharge]
type = PorousFlowSink
variable = pressure
boundary = right
flux_function = -1.25 # corresponds to Rstar being 0.5 because i have to multiply by density*porosity
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '-10 0 0'
end_point = '10 0 0'
sort_by = x
num_points = 101
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 8
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = bw01
sync_times = '0.5 2 8'
[./exodus]
type = Exodus
sync_only = true
[../]
[./along_line]
type = CSV
sync_only = true
[../]
[]
modules/rdg/test/tests/advection_1d/block_restrictable.i
############################################################
[GlobalParams]
order = CONSTANT
family = MONOMIAL
u = u
slope_limiting = lslope
implicit = false
[]
############################################################
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
xmin = 0
xmax = 1
nx = 100
[]
[./subdomain1]
type = SubdomainBoundingBoxGenerator
bottom_left = '0.5 0 0'
block_id = 1
top_right = '1.0 1.0 0'
input = gen
[../]
[./interface]
type = SideSetsBetweenSubdomainsGenerator
master_block = '0'
paired_block = '1'
new_boundary = 'master0_interface'
input = subdomain1
[../]
[./interface_again]
type = SideSetsBetweenSubdomainsGenerator
master_block = '1'
paired_block = '0'
new_boundary = 'master1_interface'
input = interface
[../]
[]
############################################################
[Functions]
[./ic_u]
type = PiecewiseConstant
axis = x
direction = right
xy_data = '0.1 0.5
0.4 1.0
0.5 0.5'
[../]
[]
############################################################
[UserObjects]
[./lslope]
type = AEFVSlopeLimitingOneD
execute_on = 'linear'
scheme = 'superbee' #none | minmod | mc | superbee
block = 0
[../]
[./internal_side_flux]
type = AEFVUpwindInternalSideFlux
execute_on = 'linear'
[../]
[./free_outflow_bc]
type = AEFVFreeOutflowBoundaryFlux
execute_on = 'linear'
[../]
[]
############################################################
[Variables]
[./u]
block = 0
[../]
[./v]
block = 1
family = LAGRANGE
order = FIRST
[../]
[]
############################################################
[ICs]
[./u_ic]
type = FunctionIC
variable = 'u'
function = ic_u
[../]
[]
############################################################
[Kernels]
[./time_u]
implicit = true
type = TimeDerivative
variable = u
block = 0
[../]
[./diff_v]
implicit = true
type = Diffusion
variable = v
block = 1
[../]
[./time_v]
implicit = true
type = TimeDerivative
variable = v
block = 1
[../]
[]
############################################################
[DGKernels]
[./concentration]
type = AEFVKernel
variable = u
component = 'concentration'
flux = internal_side_flux
block = 0
[../]
[]
############################################################
[BCs]
[./concentration]
type = AEFVBC
boundary = 'left master0_interface'
variable = u
component = 'concentration'
flux = free_outflow_bc
[../]
[./v_left]
type = DirichletBC
boundary = 'master1_interface'
variable = v
value = 1
[../]
[./v_right]
type = DirichletBC
boundary = 'right'
variable = v
value = 0
[../]
[]
############################################################
[Materials]
[./aefv]
type = AEFVMaterial
block = 0
[../]
[./dummy_1]
type = GenericConstantMaterial
block = 1
prop_names = ''
prop_values = ''
[../]
[]
############################################################
[Executioner]
type = Transient
[./TimeIntegrator]
type = ExplicitMidpoint
[../]
solve_type = 'LINEAR'
l_tol = 1e-4
nl_rel_tol = 1e-20
nl_abs_tol = 1e-8
nl_max_its = 60
start_time = 0.0
num_steps = 4 # 4 | 400 for complete run
dt = 5e-4
dtmin = 1e-6
[]
[Outputs]
[./out]
type = Exodus
interval = 2
[../]
perf_graph = true
[]
modules/combined/test/tests/gravity/gravity_rz.i
# Gravity Test
#
# This test is designed to exercise the gravity body force rz kernel.
#
# The mesh for this problem is a rectangle 10 units by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero at the top. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(y) = -b*y^2/(2*E)+b*L*y/E
#
# The displacement at y=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(y) = b*(L-y)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at y=0. The stress
# is reported at element centers. The element closest to y=0 sits
# at y = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at y = L where the stress is zero analytically. The nearest
# element is at y=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = gravity_rz_test.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[Modules/TensorMechanics/Master/All]
volumetric_locking_correction = true
strain = FINITE
add_variables = true
generate_output = 'stress_xx stress_yy stress_xy'
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_y
value = 20
[../]
[]
[BCs]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
shear_modulus = 0.5e6
lambda = 0.0
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./density]
type = Density
density = 2
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = gravity_rz_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/level_set/test/tests/transfers/markers/single_level/sub.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[AuxVariables]
[./marker]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./time]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Problem]
type = LevelSetReinitializationProblem
[]
[Executioner]
type = Transient
num_steps = 1
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
execute_on = FINAL
[../]
[]
test/tests/outputs/displacement/displaced_eq_transient_test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 5
ny = 5
elem_type = QUAD4
displacements = 'u v'
[]
[Functions]
[./right_u]
type = ParsedFunction
value = 0.1*t
[../]
[./fn_v]
type = ParsedFunction
value = (x+1)*y*0.1*t
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./td_u]
type = TimeDerivative
variable = u
use_displaced_mesh = true
[../]
[./diff_u]
type = Diffusion
variable = u
use_displaced_mesh = true
[../]
[./td_v]
type = TimeDerivative
variable = v
[../]
[./diff_v]
type = Diffusion
variable = v
[../]
[]
[BCs]
[./left_u]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right_u]
type = FunctionDirichletBC
variable = u
boundary = 1
function = right_u
[../]
[./left_v]
type = FunctionDirichletBC
variable = v
boundary = '0 2'
function = fn_v
[../]
[]
[Executioner]
type = Transient
dt = 0.1
start_time = 0
num_steps = 10
solve_type = 'PJFNK'
[]
[Outputs]
[./out_displaced]
type = Exodus
use_displaced = true
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/rsc01.i
# RSC test with high-res time and spatial resolution
[Mesh]
type = GeneratedMesh
dim = 2
nx = 600
ny = 1
xmin = 0
xmax = 10 # x is the depth variable, called zeta in RSC
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '3E-3 3E-2 0.05'
x = '0 1 5'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater poil'
number_fluid_phases = 2
number_fluid_components = 2
[../]
[./pc]
type = PorousFlowCapillaryPressureRSC
oil_viscosity = 2E-3
scale_ratio = 2E3
shift = 10
[../]
[]
[Modules]
[./FluidProperties]
[./water]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
thermal_expansion = 0
viscosity = 1e-3
[../]
[./oil]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 20
thermal_expansion = 0
viscosity = 2e-3
[../]
[../]
[]
[Materials]
[./temperature]
type = PorousFlowTemperature
[../]
[./ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = poil
capillary_pressure = pc
[../]
[./massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[../]
[./water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[../]
[./oil]
type = PorousFlowSingleComponentFluid
fp = oil
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[../]
[./relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[../]
[./relperm_oil]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[../]
[]
[Variables]
[./pwater]
[../]
[./poil]
[../]
[]
[ICs]
[./water_init]
type = ConstantIC
variable = pwater
value = 0
[../]
[./oil_init]
type = ConstantIC
variable = poil
value = 15
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[../]
[./mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = poil
[../]
[./flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = poil
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[./SOil]
family = MONOMIAL
order = CONSTANT
[../]
[./massfrac_ph0_sp0]
initial_condition = 1
[../]
[./massfrac_ph1_sp0]
initial_condition = 0
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[./SOil]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 1
variable = SOil
[../]
[]
[BCs]
# we are pumping water into a system that has virtually incompressible fluids, hence the pressures rise enormously. this adversely affects convergence because of almost-overflows and precision-loss problems. The fixed things help keep pressures low and so prevent these awful behaviours. the movement of the saturation front is the same regardless of the fixed things.
active = 'recharge fixedoil fixedwater'
[./recharge]
type = PorousFlowSink
variable = pwater
boundary = 'left'
flux_function = -1.0
[../]
[./fixedwater]
type = DirichletBC
variable = pwater
boundary = 'right'
value = 0
[../]
[./fixedoil]
type = DirichletBC
variable = poil
boundary = 'right'
value = 15
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '7 0 0'
sort_by = x
num_points = 21
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 5
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = rsc01
[./along_line]
type = CSV
execute_vector_postprocessors_on = final
[../]
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[]
python/chigger/tests/simple/sub.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
use_problem_dimension = false
[../]
[]
modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sm/sliding_elastic_blocks_2d_sm.i
[Mesh]
file = sliding_elastic_blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
quantity = incremental_slip_x
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
quantity = incremental_slip_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip]
type = PenetrationAux
variable = accum_slip
execute_on = timestep_end
quantity = accumulated_slip
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_x]
type = PenetrationAux
variable = tang_force_x
execute_on = timestep_end
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_y]
type = PenetrationAux
variable = tang_force_y
execute_on = timestep_end
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.005
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.05
num_steps = 1000
nl_rel_tol = 1e-16
nl_abs_tol = 1e-09
dtmin = 0.01
l_tol = 1e-3
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
system = constraint
friction_coefficient = '0.25'
penalty = 1e6
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
slave = 3
master = 2
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_penalty_sm.i
# This is a benchmark test that checks constraint based frictionless
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/hertz_contact/hertz_contact_hex20.i
# Hertz Contact: Sphere on sphere
# Spheres have the same radius, Young's modulus, and Poisson's ratio.
# Define E:
# 1/E = (1-nu1^2)/E1 + (1-nu2^2)/E2
#
# Effective radius R:
# 1/R = 1/R1 + 1/R2
#
# F is the applied compressive load.
#
# Area of contact a::
# a^3 = 3FR/4E
#
# Depth of indentation d:
# d = a^2/R
#
#
# Let R1 = R2 = 2. Then R = 1.
#
# Let nu1 = nu2 = 0.25, E1 = E2 = 1.40625e7. Then E = 7.5e6.
#
# Let F = 10000. Then a = 0.1, d = 0.01.
#
[Mesh]#Comment
file = hertz_contact_hex20.e
displacements = 'disp_x disp_y disp_z'
[] # Mesh
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 795.77471545947674 # 10000/pi/2^2
[../]
[./disp_y]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. -0.01 -0.01'
[../]
[] # Functions
[Variables]
[./disp_x]
order = SECOND
family = LAGRANGE
[../]
[./disp_y]
order = SECOND
family = LAGRANGE
[../]
[./disp_z]
order = SECOND
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./hydrostatic]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises
quantity = vonmises
[../]
[./hydrostatic]
type = MaterialTensorAux
tensor = stress
variable = hydrostatic
quantity = hydrostatic
[../]
[] # AuxKernels
[BCs]
[./base_x]
type = DirichletBC
variable = disp_x
boundary = 1000
value = 0.0
[../]
[./base_y]
type = DirichletBC
variable = disp_y
boundary = 1000
value = 0.0
[../]
[./base_z]
type = DirichletBC
variable = disp_z
boundary = 1000
value = 0.0
[../]
[./symm_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./symm_z]
type = DirichletBC
variable = disp_z
boundary = 3
value = 0.0
[../]
[./disp_y]
type = FunctionDirichletBC
variable = disp_y
component = 1
boundary = 2
function = disp_y
[../]
[] # BCs
[Contact]
[./dummy_name]
master = 1000
slave = 100
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
penalty = 1e7
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1.40625e7
poissons_ratio = 0.25
[../]
[./stiffStuff2] # Rigid block
type = Elastic
block = 1000
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[] # Materials
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 200
start_time = 0.0
dt = 0.5
end_time = 2.0
[./Quadrature]
order = THIRD
[../]
[] # Executioner
[Postprocessors]
[./maxdisp]
type = NodalVariableValue
nodeid = 386 # 387-1 where 387 is the exodus node number of the top-center node
variable = disp_y
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/examples/phase_field-mechanics/kks_mechanics_VTS.i
# KKS phase-field model coupled with elasticity using the Voigt-Taylor scheme as
# described in L.K. Aagesen et al., Computational Materials Science, 140, 10-21 (2017)
# Original run #170329e
[Mesh]
type = GeneratedMesh
dim = 3
nx = 640
ny = 1
nz = 1
xmin = -10
xmax = 10
ymin = 0
ymax = 0.03125
zmin = 0
zmax = 0.03125
elem_type = HEX8
[]
[Variables]
# order parameter
[./eta]
order = FIRST
family = LAGRANGE
[../]
# solute concentration
[./c]
order = FIRST
family = LAGRANGE
[../]
# chemical potential
[./w]
order = FIRST
family = LAGRANGE
[../]
# solute phase concentration (matrix)
[./cm]
order = FIRST
family = LAGRANGE
[../]
# solute phase concentration (precipitate)
[./cp]
order = FIRST
family = LAGRANGE
[../]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[ICs]
[./eta_ic]
variable = eta
type = FunctionIC
function = ic_func_eta
block = 0
[../]
[./c_ic]
variable = c
type = FunctionIC
function = ic_func_c
block = 0
[../]
[./w_ic]
variable = w
type = ConstantIC
value = 0.00991
block = 0
[../]
[./cm_ic]
variable = cm
type = ConstantIC
value = 0.131
block = 0
[../]
[./cp_ic]
variable = cp
type = ConstantIC
value = 0.236
block = 0
[../]
[]
[Functions]
[./ic_func_eta]
type = ParsedFunction
value = '0.5*(1.0+tanh((x)/delta_eta/sqrt(2.0)))'
vars = 'delta_eta'
vals = '0.8034'
[../]
[./ic_func_c]
type = ParsedFunction
value = '0.2388*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^3*(6*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^2-15*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))+10)+0.1338*(1-(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^3*(6*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))^2-15*(0.5*(1.0+tanh(x/delta/sqrt(2.0))))+10))'
vars = 'delta'
vals = '0.8034'
[../]
[./psi_eq_int]
type = ParsedFunction
value = 'volume*psi_alpha'
vars = 'volume psi_alpha'
vals = 'volume psi_alpha'
[../]
[./gamma]
type = ParsedFunction
value = '(psi_int - psi_eq_int) / dy / dz'
vars = 'psi_int psi_eq_int dy dz'
vals = 'psi_int psi_eq_int 0.03125 0.03125'
[../]
[]
[AuxVariables]
[./sigma11]
order = CONSTANT
family = MONOMIAL
[../]
[./sigma22]
order = CONSTANT
family = MONOMIAL
[../]
[./sigma33]
order = CONSTANT
family = MONOMIAL
[../]
[./e11]
order = CONSTANT
family = MONOMIAL
[../]
[./e12]
order = CONSTANT
family = MONOMIAL
[../]
[./e22]
order = CONSTANT
family = MONOMIAL
[../]
[./e33]
order = CONSTANT
family = MONOMIAL
[../]
[./e_el11]
order = CONSTANT
family = MONOMIAL
[../]
[./e_el12]
order = CONSTANT
family = MONOMIAL
[../]
[./e_el22]
order = CONSTANT
family = MONOMIAL
[../]
[./f_el]
order = CONSTANT
family = MONOMIAL
[../]
[./eigen_strain00]
order = CONSTANT
family = MONOMIAL
[../]
[./Fglobal]
order = CONSTANT
family = MONOMIAL
[../]
[./psi]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./matl_sigma11]
type = RankTwoAux
rank_two_tensor = stress
index_i = 0
index_j = 0
variable = sigma11
[../]
[./matl_sigma22]
type = RankTwoAux
rank_two_tensor = stress
index_i = 1
index_j = 1
variable = sigma22
[../]
[./matl_sigma33]
type = RankTwoAux
rank_two_tensor = stress
index_i = 2
index_j = 2
variable = sigma33
[../]
[./matl_e11]
type = RankTwoAux
rank_two_tensor = total_strain
index_i = 0
index_j = 0
variable = e11
[../]
[./matl_e12]
type = RankTwoAux
rank_two_tensor = total_strain
index_i = 0
index_j = 1
variable = e12
[../]
[./matl_e22]
type = RankTwoAux
rank_two_tensor = total_strain
index_i = 1
index_j = 1
variable = e22
[../]
[./matl_e33]
type = RankTwoAux
rank_two_tensor = total_strain
index_i = 2
index_j = 2
variable = e33
[../]
[./f_el]
type = MaterialRealAux
variable = f_el
property = f_el_mat
execute_on = timestep_end
[../]
[./GlobalFreeEnergy]
variable = Fglobal
type = KKSGlobalFreeEnergy
fa_name = fm
fb_name = fp
w = 0.0264
kappa_names = kappa
interfacial_vars = eta
[../]
[./psi_potential]
variable = psi
type = ParsedAux
args = 'Fglobal w c f_el sigma11 e11'
function = 'Fglobal - w*c + f_el - sigma11*e11'
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = right
value = 0
[../]
[./front_y]
type = DirichletBC
variable = disp_y
boundary = front
value = 0
[../]
[./back_y]
type = DirichletBC
variable = disp_y
boundary = back
value = 0
[../]
[./top_z]
type = DirichletBC
variable = disp_z
boundary = top
value = 0
[../]
[./bottom_z]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0
[../]
[]
[Materials]
# Chemical free energy of the matrix
[./fm]
type = DerivativeParsedMaterial
f_name = fm
args = 'cm'
function = '6.55*(cm-0.13)^2'
[../]
# Elastic energy of the matrix
[./elastic_free_energy_m]
type = ElasticEnergyMaterial
base_name = matrix
f_name = fe_m
args = ' '
outputs = exodus
[../]
# Total free energy of the matrix
[./Total_energy_matrix]
type = DerivativeSumMaterial
f_name = f_total_matrix
sum_materials = 'fm fe_m'
args = 'cm'
[../]
# Free energy of the precipitate phase
[./fp]
type = DerivativeParsedMaterial
f_name = fp
args = 'cp'
function = '6.55*(cp-0.235)^2'
[../]
# Elastic energy of the precipitate
[./elastic_free_energy_p]
type = ElasticEnergyMaterial
base_name = ppt
f_name = fe_p
args = ' '
outputs = exodus
[../]
# Total free energy of the precipitate
[./Total_energy_ppt]
type = DerivativeSumMaterial
f_name = f_total_ppt
sum_materials = 'fp fe_p'
args = 'cp'
[../]
# Total elastic energy
[./Total_elastic_energy]
type = DerivativeTwoPhaseMaterial
eta = eta
f_name = f_el_mat
fa_name = fe_m
fb_name = fe_p
outputs = exodus
W = 0
[../]
# h(eta)
[./h_eta]
type = SwitchingFunctionMaterial
h_order = HIGH
eta = eta
[../]
# g(eta)
[./g_eta]
type = BarrierFunctionMaterial
g_order = SIMPLE
eta = eta
[../]
# constant properties
[./constants]
type = GenericConstantMaterial
prop_names = 'M L kappa misfit'
prop_values = '0.7 0.7 0.01704 0.00377'
[../]
#Mechanical properties
[./Stiffness_matrix]
type = ComputeElasticityTensor
C_ijkl = '103.3 74.25 74.25 103.3 74.25 103.3 46.75 46.75 46.75'
base_name = matrix
fill_method = symmetric9
[../]
[./Stiffness_ppt]
type = ComputeElasticityTensor
C_ijkl = '100.7 71.45 71.45 100.7 71.45 100.7 50.10 50.10 50.10'
base_name = ppt
fill_method = symmetric9
[../]
[./stress_matrix]
type = ComputeLinearElasticStress
base_name = matrix
[../]
[./stress_ppt]
type = ComputeLinearElasticStress
base_name = ppt
[../]
[./strain_matrix]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
base_name = matrix
[../]
[./strain_ppt]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
base_name = ppt
eigenstrain_names = 'eigenstrain_ppt'
[../]
[./eigen_strain]
type = ComputeEigenstrain
base_name = ppt
eigen_base = '1 1 1 0 0 0'
prefactor = misfit
eigenstrain_name = 'eigenstrain_ppt'
[../]
[./global_stress]
type = TwoPhaseStressMaterial
base_A = matrix
base_B = ppt
[../]
[./global_strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
# enforce c = (1-h(eta))*cm + h(eta)*cp
[./PhaseConc]
type = KKSPhaseConcentration
ca = cm
variable = cp
c = c
eta = eta
[../]
# enforce pointwise equality of chemical potentials
[./ChemPotVacancies]
type = KKSPhaseChemicalPotential
variable = cm
cb = cp
fa_name = f_total_matrix
fb_name = f_total_ppt
[../]
#
# Cahn-Hilliard Equation
#
[./CHBulk]
type = KKSSplitCHCRes
variable = c
ca = cm
fa_name = f_total_matrix
w = w
[../]
[./dcdt]
type = CoupledTimeDerivative
variable = w
v = c
[../]
[./ckernel]
type = SplitCHWRes
mob_name = M
variable = w
[../]
#
# Allen-Cahn Equation
#
[./ACBulkF]
type = KKSACBulkF
variable = eta
fa_name = f_total_matrix
fb_name = f_total_ppt
w = 0.0264
args = 'cp cm'
[../]
[./ACBulkC]
type = KKSACBulkC
variable = eta
ca = cm
cb = cp
fa_name = f_total_matrix
[../]
[./ACInterface]
type = ACInterface
variable = eta
kappa_name = kappa
[../]
[./detadt]
type = TimeDerivative
variable = eta
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm ilu nonzero'
l_max_its = 30
nl_max_its = 10
l_tol = 1.0e-4
nl_rel_tol = 1.0e-8
nl_abs_tol = 1.0e-11
num_steps = 200
[./TimeStepper]
type = SolutionTimeAdaptiveDT
dt = 0.5
[../]
[]
[VectorPostprocessors]
#[./eta]
# type = LineValueSampler
# start_point = '-10 0 0'
# end_point = '10 0 0'
# variable = eta
# num_points = 321
# sort_by = id
#[../]
#[./eta_position]
# type = FindValueOnLineSample
# vectorpostprocessor = eta
# variable_name = eta
# search_value = 0.5
#[../]
# [./f_el]
# type = LineMaterialRealSampler
# start = '-20 0 0'
# end = '20 0 0'
# sort_by = id
# property = f_el
# [../]
# [./f_el_a]
# type = LineMaterialRealSampler
# start = '-20 0 0'
# end = '20 0 0'
# sort_by = id
# property = fe_m
# [../]
# [./f_el_b]
# type = LineMaterialRealSampler
# start = '-20 0 0'
# end = '20 0 0'
# sort_by = id
# property = fe_p
# [../]
# [./h_out]
# type = LineMaterialRealSampler
# start = '-20 0 0'
# end = '20 0 0'
# sort_by = id
# property = h
# [../]
# [./fm_out]
# type = LineMaterialRealSampler
# start = '-20 0 0'
# end = '20 0 0'
# sort_by = id
# property = fm
# [../]
[]
[Postprocessors]
[./f_el_int]
type = ElementIntegralMaterialProperty
mat_prop = f_el_mat
[../]
[./c_alpha]
type = SideAverageValue
boundary = left
variable = c
[../]
[./c_beta]
type = SideAverageValue
boundary = right
variable = c
[../]
[./e11_alpha]
type = SideAverageValue
boundary = left
variable = e11
[../]
[./e11_beta]
type = SideAverageValue
boundary = right
variable = e11
[../]
[./s11_alpha]
type = SideAverageValue
boundary = left
variable = sigma11
[../]
[./s22_alpha]
type = SideAverageValue
boundary = left
variable = sigma22
[../]
[./s33_alpha]
type = SideAverageValue
boundary = left
variable = sigma33
[../]
[./s11_beta]
type = SideAverageValue
boundary = right
variable = sigma11
[../]
[./s22_beta]
type = SideAverageValue
boundary = right
variable = sigma22
[../]
[./s33_beta]
type = SideAverageValue
boundary = right
variable = sigma33
[../]
[./f_el_alpha]
type = SideAverageValue
boundary = left
variable = f_el
[../]
[./f_el_beta]
type = SideAverageValue
boundary = right
variable = f_el
[../]
[./f_c_alpha]
type = SideAverageValue
boundary = left
variable = Fglobal
[../]
[./f_c_beta]
type = SideAverageValue
boundary = right
variable = Fglobal
[../]
[./chem_pot_alpha]
type = SideAverageValue
boundary = left
variable = w
[../]
[./chem_pot_beta]
type = SideAverageValue
boundary = right
variable = w
[../]
[./psi_alpha]
type = SideAverageValue
boundary = left
variable = psi
[../]
[./psi_beta]
type = SideAverageValue
boundary = right
variable = psi
[../]
[./total_energy]
type = ElementIntegralVariablePostprocessor
variable = Fglobal
[../]
# Get simulation cell size from postprocessor
[./volume]
type = ElementIntegralMaterialProperty
mat_prop = 1
[../]
[./psi_eq_int]
type = FunctionValuePostprocessor
function = psi_eq_int
[../]
[./psi_int]
type = ElementIntegralVariablePostprocessor
variable = psi
[../]
[./gamma]
type = FunctionValuePostprocessor
function = gamma
[../]
[]
#
# Precondition using handcoded off-diagonal terms
#
[Preconditioning]
[./full]
type = SMP
full = true
[../]
[]
[Outputs]
[./exodus]
type = Exodus
interval = 20
[../]
[./csv]
type = CSV
execute_on = 'final'
[../]
#[./console]
# type = Console
# output_file = true
# [../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane4_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/outputs/output_dimension/output_dimension.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./diff_x]
type = Diffusion
variable = disp_x
[../]
[./diff_y]
type = Diffusion
variable = disp_y
[../]
[./diff_z]
type = Diffusion
variable = disp_z
[../]
[./conv_x]
type = Convection
variable = disp_x
velocity = '2 0 0'
[../]
[./conv_y]
type = Convection
variable = disp_y
velocity = '2 0 0'
[../]
[./conv_z]
type = Convection
variable = disp_z
velocity = '2 0 0'
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = left
value = 0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = right
value = 1
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = left
value = 0
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = right
value = 1
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = left
value = 0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
output_dimension = 3
[../]
[]
test/tests/mesh/custom_partitioner/custom_linear_partitioner_test.i
###########################################################
# This is a test of the custom partitioner system. It
# demonstrates the usage of a linear partitioner on the
# elements of a mesh.
#
# @Requirement F2.30
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 100
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 10.0
# Custom linear partitioner
[./Partitioner]
type = LibmeshPartitioner
partitioner = linear
[../]
parallel_type = replicated
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./proc_id]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff'
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
[./proc_id]
type = ProcessorIDAux
variable = proc_id
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = custom_linear_partitioner_test_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template1_sm.i
[Mesh]
file = plane4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictional_02_penalty.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0.2 is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./left_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-3
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.2
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictionless_kinematic_sm.i
# This is a benchmark test that checks constraint based frictionless
# contact using the kinematic method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -sub_pc_type -pc_asm_overlap -ksp_gmres_restart'
petsc_options_value = 'asm lu 20 101'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+6
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictional_04_penalty_sm.i
# This is a benchmark test that checks constraint based frictional
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.4 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.4
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/solid_mechanics/test/tests/PLSH_smallstrain/PLSH_smallstrain.i
#This is a test of the piece-wise linear strain hardening model using the small strain formulation.
#The exact same problem was run in Abaqus with exactly the same result.
[Mesh]
file = 1x1x1cube.e
# displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(0.0625)
[../]
[./hf]
type = PiecewiseLinear
x = '0 0.001 0.003 0.023'
y = '50 52 54 56'
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./plastic_strain_xx]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_xx
index = 0
[../]
[./plastic_strain_yy]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_yy
index = 1
[../]
[./plastic_strain_zz]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_zz
index = 2
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./vermont]
type = SolidModel
formulation = Linear
block = 1
youngs_modulus = 2.1e5
poissons_ratio = 0.3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
constitutive_model = plsh
[../]
[./plsh]
type = IsotropicPlasticity
block = 1
yield_stress = 50.0
hardening_function = hf
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-19
start_time = 0.0
end_time = 0.075
# num_steps = 20
dt = 0.00125
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/evolving_mass_density/expand_compress_test_tensors.i
# Element mass tests
# This series of tests is designed to compute the mass of elements based on
# an evolving mass density calculation. The tests consist of expansion and compression
# of the elastic patch test model along each axis, uniform expansion and compression,
# and shear in each direction. The expansion and compression tests change the volume of
# the elements. The corresponding change in density should compensate for this so the
# mass remains constant. The shear tests should not result in a volume change, and this
# is checked too. The mass calculation is done with the post processor called Mass.
# The tests/file names are as follows:
# Expansion and compression along a single axis
# expand_compress_x_test_out.e
# expand_compress_y_test_out.e
# expand_compress_z_test_out.e
# Volumetric expansion and compression
# uniform_expand_compress_test.i
# Zero volume change shear along each axis
# shear_x_test_out.e
# shear_y_test_out.e
# shear_z_test_out.e
# The resulting mass calculation for these tests should always be = 1.
# This test is a duplicate of the uniform_expand_compress_test.i test for solid mechanics, and the
# output of this tensor mechanics test is compared to the original
# solid mechanics output. The duplication is necessary to test the
# migrated tensor mechanics version while maintaining tests for solid mechanics.
[Mesh]
file = elastic_patch.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
order = FIRST
family = LAGRANGE
[]
[Functions]
[./rampConstant1]
type = PiecewiseLinear
x = '0.00 1.00 2.0 3.00'
y = '0.00 0.25 0.0 -0.25'
scale_factor = 1
[../]
[] # Functions
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./TensorMechanics]
[../]
[]
[BCs]
[./bot_x]
type = DirichletBC
variable = disp_x
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_y
value = 0
[../]
[./bot_z]
type = DirichletBC
variable = disp_z
value = 0
[../]
[./top]
type = FunctionDirichletBC
preset = false
function = rampConstant1
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = '1 2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[./small_strain]
type = ComputeSmallStrain
block = ' 1 2 3 4 5 6 7'
[../]
[./elastic_stress]
type = ComputeLinearElasticStress
block = '1 2 3 4 5 6 7'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 3
end_time = 3.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
[Postprocessors]
[./Mass]
type = Mass
variable = disp_x
execute_on = 'initial timestep_end'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template2.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick2_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+7
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q4/hertz_cyl_half_1deg_template3.i
[GlobalParams]
order = FIRST
family = LAGRANGE
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = hertz_cyl_half_1deg.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 11.'
y = '0. -0.0020 -0.0020'
[../]
[./disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 11.'
y = '0. 0.0 0.0014'
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
extra_vector_tags = 'ref'
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./disp_x226]
type = NodalVariableValue
nodeid = 225
variable = disp_x
[../]
[./disp_y226]
type = NodalVariableValue
nodeid = 225
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[../]
[./top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[../]
[./top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[../]
[]
[Materials]
[./stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[../]
[./stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff2_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[./stuff3_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '3'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff3_strain]
type = ComputeFiniteStrain
block = '3'
[../]
[./stuff3_stress]
type = ComputeFiniteStrainElasticStress
block = '3'
[../]
[./stuff4_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '4'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff4_strain]
type = ComputeFiniteStrain
block = '4'
[../]
[./stuff4_stress]
type = ComputeFiniteStrainElasticStress
block = '4'
[../]
[./stuff5_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '5'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff5_strain]
type = ComputeFiniteStrain
block = '5'
[../]
[./stuff5_stress]
type = ComputeFiniteStrainElasticStress
block = '5'
[../]
[./stuff6_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '6'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff6_strain]
type = ComputeFiniteStrain
block = '6'
[../]
[./stuff6_stress]
type = ComputeFiniteStrainElasticStress
block = '6'
[../]
[./stuff7_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff7_strain]
type = ComputeFiniteStrain
block = '7'
[../]
[./stuff7_stress]
type = ComputeFiniteStrainElasticStress
block = '7'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 200
start_time = 0.0
end_time = 2.0
l_tol = 5e-4
dt = 0.1
dtmin = 0.1
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'x_disp y_disp cont_press'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./chkfile2]
type = CSV
show = 'bot_react_x bot_react_y disp_x226 disp_y226 top_react_x top_react_y'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./interface]
master = 2
slave = 3
disp_x = disp_x
disp_y = disp_y
model = coulomb
friction_coefficient = 0.0
system = constraint
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
master = '2'
slave = '3'
[../]
[]
modules/solid_mechanics/test/tests/rotation/rotation_test.i
#
# Rotation Test
#
# This test is designed to compute a uniaxial stress and then follow that
# stress as the mesh is rotated 90 degrees.
#
# The mesh is composed of one block with a single element. The nodal
# displacements in the x and y directions are prescribed. Poisson's
# ratio is zero.
#
[Mesh]#Comment
file = rotation_test.e
displacements = 'disp_x disp_y disp_z'
[] # Mesh
[Functions]
[./x_200]
type = ParsedFunction
vars = 'delta t0'
vals = '-1e-6 1.0'
value = 'if(t<=1.0, delta*t, (1.0+delta)*cos(pi/2*(t-t0)) - 1.0)'
[../]
[./y_200]
type = ParsedFunction
vars = 'delta t0'
vals = '-1e-6 1.0'
value = 'if(t<=1.0, 0.0, (1.0+delta)*sin(pi/2*(t-t0)))'
[../]
[./x_300]
type = ParsedFunction
vars = 'delta t0'
vals = '-1e-6 1.0'
value = 'if(t<=1.0, delta*t, (1.0+delta)*cos(pi/2.0*(t-t0)) - sin(pi/2.0*(t-t0)) - 1.0)'
[../]
[./y_300]
type = ParsedFunction
vars = 'delta t0'
vals = '-1e-6 1.0'
value = 'if(t<=1.0, 0.0, cos(pi/2.0*(t-t0)) + (1+delta)*sin(pi/2.0*(t-t0)) - 1.0)'
[../]
[./x_400]
type = ParsedFunction
vars = 'delta t0'
vals = '-1e-6 1.0'
value = 'if(t<=1.0, 0.0, -sin(pi/2.0*(t-t0)))'
[../]
[./y_400]
type = ParsedFunction
vars = 'delta t0'
vals = '-1e-6 1.0'
value = 'if(t<=1.0, 0.0, cos(pi/2.0*(t-t0)) - 1.0)'
[../]
[] # Functions
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[] # AuxKernels
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 100
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 100
value = 0.0
[../]
[./x_200]
type = FunctionDirichletBC
variable = disp_x
boundary = 200
function = x_200
[../]
[./y_200]
type = FunctionDirichletBC
variable = disp_y
boundary = 200
function = y_200
[../]
[./x_300]
type = FunctionDirichletBC
variable = disp_x
boundary = 300
function = x_300
[../]
[./y_300]
type = FunctionDirichletBC
variable = disp_y
boundary = 300
function = y_300
[../]
[./x_400]
type = FunctionDirichletBC
variable = disp_x
boundary = 400
function = x_400
[../]
[./y_400]
type = FunctionDirichletBC
variable = disp_y
boundary = 400
function = y_400
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = '100 200 300 400'
value = 0.0
[../]
[] # BCs
[Materials]
[./test]
type = Elastic
block = 1
poissons_ratio = 0
shear_modulus = 5e6
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[] # Materials
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
nl_rel_tol = 1e-30
l_max_its = 20
start_time = 0.0
dt = 0.01
end_time = 2.0
[] # Executioner
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/solid_mechanics/pressure/sm/pressure_test_sm.i
#
# Pressure Test
#
# This test is designed to compute pressure loads on three faces of a unit cube.
#
# The mesh is composed of one block with a single element. Symmetry bcs are
# applied to the faces opposite the pressures. Poisson's ratio is zero,
# which makes it trivial to check displacements.
#
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
volumetric_locking_correction = false
[../]
[Mesh]#Comment
file = pressure_test.e
displacements = 'disp_x disp_y disp_z'
[] # Mesh
[Functions]
[./rampConstant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1.0
[../]
[./zeroRamp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 0. 1.'
scale_factor = 2.0
[../]
[./rampUnramp]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 0.'
scale_factor = 10.0
[../]
[] # Functions
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[] # Variables
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = false
[../]
[] # SolidMechanics
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./Pressure]
[./Side1]
boundary = 1
function = rampConstant
[../]
[./Side2]
boundary = 2
function = zeroRamp
[../]
[./Side3]
boundary = 3
function = rampUnramp
[../]
[../]
[] # BCs
[Materials]
[./stiffStuff]
type = LinearIsotropicMaterial
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
poissons_ratio = 0.0
thermal_expansion = 1e-5
[../]
[] # Materials
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
test/tests/outputs/oversample/oversample_file.i
[Mesh]
type = FileMesh
file = square.e
dim = 2
uniform_refine = 1
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
refinements = 1
file_base = exodus_oversample_custom_name
[../]
[]
test/tests/materials/output/output_block_displaced.i
[Mesh]
type = FileMesh
file = rectangle.e
dim = 2
uniform_refine = 1
displacements = 'disp disp'
[]
[Functions]
[./disp_fn]
type = ParsedFunction
value = x
[../]
[]
[AuxVariables]
[./disp]
[../]
[]
[AuxKernels]
[./disp_ak]
type = FunctionAux
variable = disp
function = disp_fn
[../]
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.5
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 2
[../]
[]
[Materials]
[./block_1]
type = OutputTestMaterial
block = 1
output_properties = 'real_property tensor_property'
outputs = exodus
variable = u
[../]
[./block_2]
type = OutputTestMaterial
block = 2
output_properties = 'vector_property tensor_property'
outputs = exodus
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 5
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./exodus]
type = Exodus
use_displaced = true
sequence = false
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane3_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/outputs/exodus/exodus_discontinuous.i
##
# \file exodus/exodus_discontinuous.i
# \example exodus/exodus_discontinuous.i
# Input file for testing discontinuous data output
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./disc_u]
family = monomial
order = first
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = disc_u
[../]
[./forcing]
type = BodyForce
variable = disc_u
value = 7
[../]
[]
[DGKernels]
[./diff_dg]
type = DGDiffusion
variable = disc_u
sigma = 1
epsilon = 1
[../]
[]
[Functions]
[./zero_fn]
type = ParsedFunction
value = 0.0
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = disc_u
boundary = 'left right top bottom'
function = zero_fn
sigma = 1
epsilon = 1
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exo_out]
type = Exodus
discontinuous = true
file_base = 'exodus_discontinuous_out'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick2_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[./tang_force_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
file_base = brick2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = brick2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+7
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_mu_0_2_pen_sm.i
[Mesh]
file = cyl4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/phase_field/test/tests/free_energy_material/RegularSolutionFreeEnergy.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
xmax = 1
ymax = 500
elem_type = QUAD4
[]
[Variables]
[./c]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = x
[../]
[../]
[./myT]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = y
[../]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = c
[../]
[./diff2]
type = Diffusion
variable = myT
[../]
[]
[BCs]
[./left]
type = FunctionDirichletBC
variable = c
boundary = left
function = x
[../]
[./bottom]
type = FunctionDirichletBC
variable = myT
boundary = bottom
function = y
[../]
[./right]
type = FunctionDirichletBC
variable = c
boundary = right
function = x
[../]
[./top]
type = FunctionDirichletBC
variable = myT
boundary = top
function = y
[../]
[]
[Materials]
[./free_energy]
type = RegularSolutionFreeEnergy
f_name = F
c = c
T = myT
outputs = out
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
l_max_its = 1
nl_max_its = 1
nl_abs_tol = 1
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
execute_on = timestep_end
[../]
[]
test/tests/transfers/transfer_on_final/master.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[u]
initial_condition = 1234
[]
[v]
initial_condition = 2458
[]
[]
[Problem]
type = FEProblem
solve = false
[]
[Executioner]
type = Transient
num_steps = 4
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[MultiApps]
[sub]
type = TransientMultiApp
input_files = sub.i
execute_on = 'INITIAL TIMESTEP_END'
[]
[]
[Transfers]
[from_sub]
type = MultiAppCopyTransfer
direction = from_multiapp
source_variable = u
variable = u
multi_app = sub
check_multiapp_execute_on = false
execute_on = 'FINAL'
[]
[to_sub]
type = MultiAppCopyTransfer
direction = to_multiapp
source_variable = v
variable = v
multi_app = sub
check_multiapp_execute_on = false
execute_on = 'FINAL'
[]
[]
[Outputs]
exodus = true
[final]
type = Exodus
execute_on = 'FINAL'
execute_input_on = 'NONE' # This is needed to avoid problems with creating a file w/o data during --recover testing
[]
[]
modules/combined/test/tests/sliding_block/in_and_out/dirac/frictional_04_penalty.i
# This is a benchmark test that checks Dirac based frictional
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2 and a friction coefficient
# of 0. is used. The gold file is run on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./constitutive]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
file_base = frictional_04_penalty_out
interval = 10
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
friction_coefficient = 0.4
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/rd02.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 120
ny = 1
xmin = 0
xmax = 6
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-2 1 10 500 5000 50000'
x = '0 10 100 1000 10000 500000'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[../]
[]
[Variables]
[./pressure]
initial_condition = 0.0
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./base]
type = DirichletBC
boundary = left
value = 0.0
variable = pressure
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 345600
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = rd02
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[./along_line]
type = CSV
execute_on = final
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/rsc02.i
# RSC test with low-res time and spatial resolution
[Mesh]
type = GeneratedMesh
dim = 2
nx = 200
ny = 1
xmin = 0
xmax = 10 # x is the depth variable, called zeta in RSC
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '3E-2 5E-1 8E-1'
x = '0 1 5'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater poil'
number_fluid_phases = 2
number_fluid_components = 2
[../]
[./pc]
type = PorousFlowCapillaryPressureRSC
oil_viscosity = 2E-3
scale_ratio = 2E3
shift = 10
[../]
[]
[Modules]
[./FluidProperties]
[./water]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
thermal_expansion = 0
viscosity = 1e-3
[../]
[./oil]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 20
thermal_expansion = 0
viscosity = 2e-3
[../]
[../]
[]
[Materials]
[./temperature]
type = PorousFlowTemperature
[../]
[./ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = poil
capillary_pressure = pc
[../]
[./massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[../]
[./water]
type = PorousFlowSingleComponentFluid
fp = water
phase = 0
compute_enthalpy = false
compute_internal_energy = false
[../]
[./oil]
type = PorousFlowSingleComponentFluid
fp = oil
phase = 1
compute_enthalpy = false
compute_internal_energy = false
[../]
[./relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[../]
[./relperm_oil]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[../]
[]
[Variables]
[./pwater]
[../]
[./poil]
[../]
[]
[ICs]
[./water_init]
type = ConstantIC
variable = pwater
value = 0
[../]
[./oil_init]
type = ConstantIC
variable = poil
value = 15
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[../]
[./mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = poil
[../]
[./flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = poil
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[./SOil]
family = MONOMIAL
order = CONSTANT
[../]
[./massfrac_ph0_sp0]
initial_condition = 1
[../]
[./massfrac_ph1_sp0]
initial_condition = 0
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[./SOil]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 1
variable = SOil
[../]
[]
[BCs]
# we are pumping water into a system that has virtually incompressible fluids, hence the pressures rise enormously. this adversely affects convergence because of almost-overflows and precision-loss problems. The fixed things help keep pressures low and so prevent these awful behaviours. the movement of the saturation front is the same regardless of the fixed things.
active = 'recharge fixedoil fixedwater'
[./recharge]
type = PorousFlowSink
variable = pwater
boundary = 'left'
flux_function = -1.0
[../]
[./fixedwater]
type = DirichletBC
variable = pwater
boundary = 'right'
value = 0
[../]
[./fixedoil]
type = DirichletBC
variable = poil
boundary = 'right'
value = 15
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '7 0 0'
sort_by = x
num_points = 21
execute_on = timestep_end
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 5
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[Outputs]
file_base = rsc02
[./along_line]
type = CSV
execute_vector_postprocessors_on = final
[../]
[./exodus]
type = Exodus
execute_on = 'initial final'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_template1_sm.i
[Mesh]
file = plane3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/simplest_contact/sm/simplest_contact_test_sm.i
[Mesh]
file = simplest_contact.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./penetration]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
[../]
[]
[Constraints]
[./contact_x]
type = MultiDContactConstraint
variable = disp_x
master_variable = disp_x
component = 0
slave = 2
master = 3
penalty = 1e6
[../]
[./contact_y]
type = MultiDContactConstraint
variable = disp_y
master_variable = disp_y
component = 1
slave = 2
master = 3
penalty = 1e6
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[] # BCs
[Materials]
[./stiffStuff1]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_x = disp_x
disp_y = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[] # Materials
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
# petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
# petsc_options_value = 'hypre boomeramg 101'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Output
modules/solid_mechanics/test/tests/material_limit_time_step/creep/nafems_test5a_lim.i
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
temp = temp
order = FIRST
family = LAGRANGE
[]
[Mesh]
file = plane1_mesh.e
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./temp]
initial_condition = 1500.0
[../]
[./creep]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./pressure]
order = CONSTANT
family = MONOMIAL
[../]
[./invariant3]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
[../]
[]
[AuxKernels]
[./creep_aux]
type = MaterialRealAux
property = effective_creep_strain
variable = creep
[../]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises
quantity = vonmises
[../]
[./pressure]
type = MaterialTensorAux
tensor = stress
variable = pressure
quantity = hydrostatic
[../]
[./invariant3]
type = MaterialTensorAux
tensor = stress
variable = invariant3
quantity = thirdInvariant
[../]
[./creep_strain_xx]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_xx
index = 0
[../]
[./creep_strain_yy]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_yy
index = 1
[../]
[./creep_strain_zz]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_zz
index = 2
[../]
[./creep_strain_xy]
type = MaterialTensorAux
tensor = creep_strain
variable = creep_strain_xy
index = 3
[../]
[./elastic_str_xx_aux]
type = MaterialTensorAux
tensor = elastic_strain
variable = elastic_strain_xx
index = 0
[../]
[./elastic_str_yy_aux]
type = MaterialTensorAux
tensor = elastic_strain
variable = elastic_strain_yy
index = 1
[../]
[./elastic_str_zz_aux]
type = MaterialTensorAux
tensor = elastic_strain
variable = elastic_strain_zz
index = 2
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 3
component = 1
factor = -100.0
[../]
[./side_press]
type = Pressure
variable = disp_x
boundary = 4
component = 0
factor = -200.0
[../]
[]
[Materials]
[./stiffStuff1]
type = SolidModel
block = 1
youngs_modulus = 200e3
poissons_ratio = 0.3
constitutive_model = combined
formulation = NonlinearPlaneStrain
large_strain = true
[../]
[./combined]
type = CombinedCreepPlasticity
block = 1
submodels = 'creep_matl'
[../]
[./creep_matl]
type = PowerLawCreepModel
block = 1
coefficient = 3.125e-14
n_exponent = 5
activation_energy = 0
max_inelastic_increment = 0.01
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_rel_tol = 1e-5
nl_abs_tol = 1e-8
l_max_its = 50
nl_max_its = 100
end_time = 1000.0
num_steps = 10000
l_tol = 1e-3
[./TimeStepper]
type = IterationAdaptiveDT
dt = 1e-6
time_t = '1e-6 2e-6 3e-6 5e-6 9e-6 1.7e-5 3.3e-5 6.5e-5 1.29e-4 2.57e-4 5.13e-4 1.025e-3 2.049e-3 4.097e-3 8.193e-3 1.638e-2 3.276e-2 5.734e-2 0.106 0.180 0.291 0.457 0.706 1.08 1.64 2.48 3.74 5.63 8.46 12.7 19.1 28.7 43.0 64.5 108.0 194.0 366.0 710.0 1000.0'
time_dt = '1e-6 1e-6 2e-6 4e-6 8e-6 1.6e-5 3.2e-5 6.4e-5 1.28e-4 2.56e-4 5.12e-4 1.024e-3 2.048e-3 4.096e-3 8.192e-3 1.6384e-2 2.458e-2 4.915e-2 7.40e-2 0.111 0.166 0.249 0.374 0.560 0.840 1.26 1.89 2.83 4.25 6.40 9.6 14.3 21.5 43.0 86.1 172.0 344.0 290.0 290.0'
optimal_iterations = 30
iteration_window = 9
growth_factor = 2.0
cutback_factor = 0.5
timestep_limiting_postprocessor = matl_ts_min
[../]
[]
[Postprocessors]
[./matl_ts_min]
type = MaterialTimeStepPostprocessor
[../]
[./sigma_xx]
type = ElementAverageValue
variable = stress_xx
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./vonmises]
type = ElementAverageValue
variable = vonmises
[../]
[./pressure]
type = ElementAverageValue
variable = pressure
[../]
[./invariant3]
type = ElementAverageValue
variable = invariant3
[../]
[./eps_crp_xx]
type = ElementAverageValue
variable = creep_strain_xx
[../]
[./eps_crp_yy]
type = ElementAverageValue
variable = creep_strain_yy
[../]
[./eps_crp_zz]
type = ElementAverageValue
variable = creep_strain_zz
[../]
[./eps_crp_mag]
type = ElementAverageValue
variable = creep
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x3]
type = NodalVariableValue
nodeid = 2
variable = disp_x
[../]
[./disp_y3]
type = NodalVariableValue
nodeid = 2
variable = disp_y
[../]
[./disp_y4]
type = NodalVariableValue
nodeid = 3
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./elas_str_xx]
type = ElementAverageValue
variable = elastic_strain_xx
[../]
[./elas_str_yy]
type = ElementAverageValue
variable = elastic_strain_yy
[../]
[./elas_str_zz]
type = ElementAverageValue
variable = elastic_strain_zz
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 25
[../]
[]
modules/combined/test/tests/simplest_contact/sm/simplest_contact_skew_test_sm.i
[Mesh]
file = simplest_contact_skew.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
[../]
[]
[Constraints]
[./contact_x]
type = MultiDContactConstraint
variable = disp_x
master_variable = disp_x
component = 0
slave = 2
master = 3
penalty = 1e6
[../]
[./contact_y]
type = MultiDContactConstraint
variable = disp_y
master_variable = disp_y
component = 1
slave = 2
master = 3
penalty = 1e6
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_x = disp_x
disp_y = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
#petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
#petsc_options_value = 'hypre boomeramg 101'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/phase_field/test/tests/initial_conditions/SpecifiedSmoothSuperellipsoidIC.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = SpecifiedSmoothSuperellipsoidIC
variable = c
x_positions = '15 35'
y_positions = '25.0 25.0'
z_positions = '0 0'
as = '8.0 8.0'
bs = '12.0 8.0'
cs = '60.0 8.0'
ns = '3.5 2.0'
invalue = 1.0
outvalue = -0.8
int_width = 4.0
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CHMath
variable = c
mob_name = M
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-4
nl_max_its = 40
nl_rel_tol = 1e-9
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
exodus = false
[./out]
type = Exodus
refinements = 2
[../]
[]
test/tests/outputs/error/duplicate_outputs.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./exodus]
type = Exodus
[../]
[]
modules/richards/test/tests/user_objects/uo3.i
# Seff User objects give the correct value
# Sat User objects give the correct value
#
# If you want to add another test for another UserObject
# then add the UserObject, add a Function defining the expected result,
# add an AuxVariable and AuxKernel that will record the UserObjects value
# and finally add a NodalL2Error that compares this with the Function
#
# Here pressure is x where x runs between -5E6 and 5E6
[UserObjects]
[./Seff1VG]
type = RichardsSeff1VG
m = 0.8
al = 1E-6
[../]
[./Seff1BWsmall]
type = RichardsSeff1BWsmall
Sn = 0.0
Ss = 1.0
C = 1.01
las = 1E5
[../]
[./Seff1RSC]
type = RichardsSeff1RSC
oil_viscosity = 4.0
scale_ratio = 1E6
shift = -2E6
[../]
[./Seff1VGcut]
type = RichardsSeff1VGcut
m = 0.8
al = 1E-6
p_cut = -1E6
[../]
# following are unimportant in this test
[./PPNames]
type = RichardsVarNames
richards_vars = pressure
[../]
[./DensityConstBulk]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./RelPermPower]
type = RichardsRelPermPower
simm = 0.10101
n = 2
[../]
[./Saturation]
type = RichardsSat
s_res = 0.054321
sum_s_res = 0.054321
[../]
[./SUPGstandard]
type = RichardsSUPGstandard
p_SUPG = 1E5
[../]
[]
[Functions]
[./initial_pressure]
type = ParsedFunction
value = x
[../]
[./answer_Seff1VG]
type = ParsedFunction
value = (1+max((-x)*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '1E-6 0.8'
[../]
[./answer_dSeff1VG]
type = GradParsedFunction
direction = '1 0 0'
value = (1+max((-x)*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '1E-6 0.8'
[../]
[./answer_d2Seff1VG]
type = Grad2ParsedFunction
direction = '1 0 0'
value = (1+max((-x)*al,0)^(1/(1-m)))^(-m)
vars = 'al m'
vals = '1E-6 0.8'
[../]
[./answer_Seff1BW]
type = PiecewiseLinear
format = columns
data_file = satBW.csv
axis = x
[../]
[./answer_Seff1BWprime]
type = PiecewiseLinear
format = columns
data_file = satBWprime.csv
axis = x
[../]
[./answer_Seff1BW2prime]
type = PiecewiseLinear
format = columns
data_file = satBW2prime.csv
axis = x
[../]
[./answer_Seff1RSC]
type = ParsedFunction
value = (1+exp((-x-shift)/scale))^(-0.5)
vars = 'shift scale'
vals = '-2E6 1E6'
[../]
[./answer_dSeff1RSC]
type = GradParsedFunction
direction = '1 0 0'
value = (1+exp((-x-shift)/scale))^(-0.5)
vars = 'shift scale'
vals = '-2E6 1E6'
[../]
[./answer_d2Seff1RSC]
type = Grad2ParsedFunction
direction = '1 0 0'
value = (1+exp((-x-shift)/scale))^(-0.5)
vars = 'shift scale'
vals = '-2E6 1E6'
[../]
[./answer_Seff1VGcut]
type = ParsedFunction
value = if(x<pcut,scut+dscut*(x-pcut),(1+max((-x)*al,0)^(1/(1-m)))^(-m))
vars = 'al m pcut scut dscut'
vals = '1E-6 0.8 -1E6 0.574349177498517 1.14869835499703e-06'
[../]
[./answer_dSeff1VGcut]
type = GradParsedFunction
direction = '1 0 0'
value = if(x<pcut,scut+dscut*(x-pcut),(1+max((-x)*al,0)^(1/(1-m)))^(-m))
vars = 'al m pcut scut dscut'
vals = '1E-6 0.8 -1E6 0.574349177498517 1.14869835499703e-06'
[../]
[./answer_d2Seff1VGcut]
type = Grad2ParsedFunction
direction = '1 0 0'
value = if(x<pcut,scut+dscut*(x-pcut),(1+max((-x)*al,0)^(1/(1-m)))^(-m))
vars = 'al m pcut scut dscut'
vals = '1E-6 0.8 -1E6 0.574349177498517 1.14869835499703e-06'
[../]
[./answer_Sat]
type = ParsedFunction
value = sres+((1-sumsres)*((1+max((-x)*al,0)^(1/(1-m)))^(-m)))
vars = 'al m sres sumsres'
vals = '1E-6 0.8 0.054321 0.054321'
[../]
[./answer_dSat]
type = ParsedFunction
value = 1-sumsres
vars = 'sumsres'
vals = '0.054321'
[../]
[]
[AuxVariables]
[./Seff1VG_Aux]
[../]
[./dSeff1VG_Aux]
[../]
[./d2Seff1VG_Aux]
[../]
[./Seff1BWsmall_Aux]
[../]
[./dSeff1BWsmall_Aux]
[../]
[./d2Seff1BWsmall_Aux]
[../]
[./Seff1RSC_Aux]
[../]
[./dSeff1RSC_Aux]
[../]
[./d2Seff1RSC_Aux]
[../]
[./Seff1VGcut_Aux]
[../]
[./dSeff1VGcut_Aux]
[../]
[./d2Seff1VGcut_Aux]
[../]
[./Sat_Aux]
[../]
[./dSat_Aux]
[../]
[./check_Aux]
[../]
[]
[AuxKernels]
[./Seff1VG_AuxK]
type = RichardsSeffAux
variable = Seff1VG_Aux
seff_UO = Seff1VG
pressure_vars = pressure
[../]
[./dSeff1VG_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff1VG_Aux
seff_UO = Seff1VG
pressure_vars = pressure
wrtnum = 0
[../]
[./d2Seff1VG_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff1VG_Aux
seff_UO = Seff1VG
pressure_vars = pressure
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Seff1BWsmall_AuxK]
type = RichardsSeffAux
variable = Seff1BWsmall_Aux
seff_UO = Seff1BWsmall
pressure_vars = pressure
[../]
[./dSeff1BWsmall_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff1BWsmall_Aux
seff_UO = Seff1BWsmall
pressure_vars = pressure
wrtnum = 0
[../]
[./d2Seff1BWsmall_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff1BWsmall_Aux
seff_UO = Seff1BWsmall
pressure_vars = pressure
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Seff1RSC_AuxK]
type = RichardsSeffAux
variable = Seff1RSC_Aux
seff_UO = Seff1RSC
pressure_vars = pressure
[../]
[./dSeff1RSC_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff1RSC_Aux
seff_UO = Seff1RSC
pressure_vars = pressure
wrtnum = 0
[../]
[./d2Seff1RSC_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff1RSC_Aux
seff_UO = Seff1RSC
pressure_vars = pressure
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Seff1VGcut_AuxK]
type = RichardsSeffAux
variable = Seff1VGcut_Aux
seff_UO = Seff1VGcut
pressure_vars = pressure
[../]
[./dSeff1VGcut_AuxK]
type = RichardsSeffPrimeAux
variable = dSeff1VGcut_Aux
seff_UO = Seff1VGcut
pressure_vars = pressure
wrtnum = 0
[../]
[./d2Seff1VGcut_AuxK]
type = RichardsSeffPrimePrimeAux
variable = d2Seff1VGcut_Aux
seff_UO = Seff1VGcut
pressure_vars = pressure
wrtnum1 = 0
wrtnum2 = 0
[../]
[./Sat_AuxK]
type = RichardsSatAux
sat_UO = Saturation
seff_var = Seff1VG_Aux
variable = Sat_Aux
[../]
[./dSat_AuxK]
type = RichardsSatPrimeAux
sat_UO = Saturation
seff_var = Seff1VG_Aux
variable = dSat_Aux
[../]
[./check_AuxK]
type = FunctionAux
variable = check_Aux
function = answer_Seff1VGcut
[../]
[]
[Postprocessors]
[./cf_Seff1VG]
type = NodalL2Error
function = answer_Seff1VG
variable = Seff1VG_Aux
[../]
[./cf_dSeff1VG]
type = NodalL2Error
function = answer_dSeff1VG
variable = dSeff1VG_Aux
[../]
[./cf_d2Seff1VG]
type = NodalL2Error
function = answer_d2Seff1VG
variable = d2Seff1VG_Aux
[../]
[./cf_Seff1BW]
type = NodalL2Error
function = answer_Seff1BW
variable = Seff1BWsmall_Aux
[../]
[./cf_Seff1BWprime]
type = NodalL2Error
function = answer_Seff1BWprime
variable = dSeff1BWsmall_Aux
[../]
[./cf_Seff1BW2prime]
type = NodalL2Error
function = answer_Seff1BW2prime
variable = d2Seff1BWsmall_Aux
[../]
[./cf_Seff1RSC]
type = NodalL2Error
function = answer_Seff1RSC
variable = Seff1RSC_Aux
[../]
[./cf_dSeff1RSC]
type = NodalL2Error
function = answer_dSeff1RSC
variable = dSeff1RSC_Aux
[../]
[./cf_d2Seff1RSC]
type = NodalL2Error
function = answer_d2Seff1RSC
variable = d2Seff1RSC_Aux
[../]
[./cf_Seff1VGcut]
type = NodalL2Error
function = answer_Seff1VGcut
variable = Seff1VGcut_Aux
[../]
[./cf_dSeff1VGcut]
type = NodalL2Error
function = answer_dSeff1VGcut
variable = dSeff1VGcut_Aux
[../]
[./cf_d2Seff1VGcut]
type = NodalL2Error
function = answer_d2Seff1VGcut
variable = d2Seff1VGcut_Aux
[../]
[./cf_Sat]
type = NodalL2Error
function = answer_Sat
variable = Sat_Aux
[../]
[./cf_dSat]
type = NodalL2Error
function = answer_dSat
variable = dSat_Aux
[../]
[]
#############################################################################
#
# Following is largely unimportant as we are not running an actual similation
#
#############################################################################
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -5E6
xmax = 5E6
[]
[Variables]
[./pressure]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = initial_pressure
[../]
[../]
[]
[Kernels]
active = 'richardsf richardst'
[./richardst]
type = RichardsMassChange
richardsVarNames_UO = PPNames
variable = pressure
[../]
[./richardsf]
type = RichardsFlux
richardsVarNames_UO = PPNames
variable = pressure
[../]
[]
[Materials]
[./unimportant_material]
type = RichardsMaterial
block = 0
mat_porosity = 0.1
mat_permeability = '1E-20 0 0 0 1E-20 0 0 0 1E-20'
richardsVarNames_UO = PPNames
density_UO = DensityConstBulk
relperm_UO = RelPermPower
sat_UO = Saturation
seff_UO = Seff1VG
SUPG_UO = SUPGstandard
viscosity = 1E-3
gravity = '0 0 -10'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
[./does_nothing]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E50 1E50 10000'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 1
dt = 1E-100
[]
[Outputs]
execute_on = 'timestep_end'
active = 'csv'
file_base = uo3
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = pressure
[../]
[]
modules/tensor_mechanics/test/tests/temperature_dependent_hardening/temp_dep_hardening.i
#
# This is a test of the piece-wise linear strain hardening model using the
# small strain formulation. This test exercises the temperature-dependent
# hardening curve capability.
#
# Test procedure:
# 1. The element is pulled to and then beyond the yield stress for a given
# temperature.
# 2. The displacement is then constant while the temperature increases and
# the yield stress decreases. This results in a lower stress with more
# plastic strain.
# 3. The temperature decreases beyond its original value giving a higher
# yield stress. The displacement increases, causing increases stress to
# the new yield stress.
# 4. The temperature and yield stress are constant with increasing
# displacement giving a constant stress and more plastic strain.
#
# Plotting total_strain_yy on the x axis and stress_yy on the y axis shows
# the stress history in a clear way.
#
# s |
# t | *****
# r | *
# e | ***** *
# s | * * *
# s | * *
# |*
# +------------------
# total strain
#
# The exact same problem was run in Abaqus with exactly the same result.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
# This test uses ElementalVariableValue postprocessors on specific
# elements, so element numbering needs to stay unchanged
allow_renumbering = false
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[AuxVariables]
[./temp]
order = FIRST
family = LAGRANGE
initial_condition = 500.0
[../]
[]
[AuxKernels]
[./temp_aux]
type = FunctionAux
variable = temp
function = temp_hist
[../]
[]
[Functions]
[./top_pull]
type = PiecewiseLinear
x = '0 1 2 4 5 6'
y = '0 0.025 0.05 0.05 0.06 0.085'
[../]
[./hf1]
type = PiecewiseLinear
x = '0.0 0.01 0.02 0.03 0.1'
y = '5000 5030 5060 5090 5300'
[../]
[./hf2]
type = PiecewiseLinear
x = '0.0 0.01 0.02 0.03 0.1'
y = '4000 4020 4040 4060 4200'
[../]
[./temp_hist]
type = PiecewiseLinear
x = '0 1 2 3 4'
y = '500 500 500 600 400'
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = SMALL
incremental = true
add_variables = true
generate_output = 'stress_yy strain_yy plastic_strain_xx plastic_strain_yy plastic_strain_zz'
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 3
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 0
value = 0.0
[../]
[]
[Postprocessors]
[./stress_yy_el]
type = ElementalVariableValue
variable = stress_yy
elementid = 0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 2e5
poissons_ratio = 0.3
[../]
[./temp_dep_hardening]
type = TemperatureDependentHardeningStressUpdate
hardening_functions = 'hf1 hf2'
temperatures = '300.0 800.0'
relative_tolerance = 1e-25
absolute_tolerance = 1e-5
temperature = temp
[../]
[./radial_return_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'temp_dep_hardening'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_hypre_type -pc_hypre_boomeramg_max_iter'
petsc_options_value = '201 hypre boomeramg 4'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
end_time = 6
dt = 0.1
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
modules/phase_field/test/tests/initial_conditions/BimodalInverseSuperellipsoidsIC.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 25
ny = 25
xmax = 50
ymax = 50
elem_type = QUAD4
[]
[Variables]
[./c]
order = THIRD
family = HERMITE
[../]
[]
[ICs]
[./c]
type = BimodalInverseSuperellipsoidsIC
variable = c
x_positions = '25.0'
y_positions = '25.0'
z_positions = '0.0'
as = '20.0'
bs = '20.0'
cs = '1'
ns = '3.5'
npart = 8
invalue = 1.0
outvalue = -0.8
nestedvalue = -1.5
int_width = 0.0
large_spac = 5
small_spac = 2
small_a = 3
small_b = 3
small_c = 3
small_n = 2
size_variation_type = none
numtries = 10000
[../]
[]
[Kernels]
[./ie_c]
type = TimeDerivative
variable = c
[../]
[./CHSolid]
type = CHMath
variable = c
mob_name = M
[../]
[./CHInterface]
type = CHInterface
variable = c
kappa_name = kappa_c
mob_name = M
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./constant]
type = GenericConstantMaterial
prop_names = 'M kappa_c'
prop_values = '1.0 1.0'
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
l_max_its = 20
l_tol = 1.0e-4
nl_max_its = 40
nl_rel_tol = 1e-9
start_time = 0.0
num_steps = 1
dt = 2.0
[]
[Outputs]
exodus = false
[./out]
type = Exodus
refinements = 2
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick1_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/outputs/intervals/no_output.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 4
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
execute_on = none
[../]
[]
test/tests/outputs/exodus/hide_variables.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[AuxVariables]
[./aux0]
order = SECOND
family = SCALAR
[../]
[./aux1]
family = SCALAR
initial_condition = 5
[../]
[./aux2]
family = SCALAR
initial_condition = 10
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./diff_v]
type = CoefDiffusion
variable = v
coef = 2
[../]
[]
[BCs]
[./right_u]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_u]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = right
value = 3
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = left
value = 2
[../]
[]
[Postprocessors]
[./num_vars]
type = NumVars
system = 'NL'
[../]
[./num_aux]
type = NumVars
system = 'AUX'
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
hide = 'aux2 v num_aux'
[../]
[]
[ICs]
[./aux0_IC]
variable = aux0
values = '12 13'
type = ScalarComponentIC
[../]
[]
test/tests/adaptivity/max_h_level/max_h_level.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
nz = 0
zmax = 0
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[Functions]
[./force]
type = ParsedFunction
value = t
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./force]
type = BodyForce
variable = u
function = force
[../]
[]
[BCs]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[]
[Executioner]
type = Transient
num_steps = 4
dt = 1
solve_type = PJFNK
[]
[Adaptivity]
steps = 1
marker = box
max_h_level = 2
[./Markers]
[./box]
bottom_left = '0.3 0.3 0'
inside = refine
top_right = '0.6 0.6 0'
outside = do_nothing
type = BoxMarker
[../]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
execute_scalars_on = none
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_mu_0_2_pen_sm.i
[Mesh]
file = plane1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/tensor_mechanics/test/tests/crystal_plasticity/rot-eg1.i
#
# Rotation Test
#
# This test is designed to compute a uniaxial stress and then follow that
# stress as the mesh is rotated 90 degrees.
#
# The mesh is composed of one block with a single element. The nodal
# displacements in the x and y directions are prescribed. Poisson's
# ratio is zero.
#
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 3
elem_type = HEX8
displacements = 'ux uy uz'
[]
[./side1n1]
input = gen
type = ExtraNodesetGenerator
coord = '0.0 0.0 0.0'
boundary = 6
[../]
[./side1n2]
input = side1n1
type = ExtraNodesetGenerator
coord = '1.0 0.0 0.0'
boundary = 7
[../]
[./side2n1]
input = side1n2
type = ExtraNodesetGenerator
coord = '0.0 1.0 0.0'
boundary = 8
[../]
[./side2n2]
input = side2n1
type = ExtraNodesetGenerator
coord = '1.0 1.0 0.0'
boundary = 9
[../]
[./side3n1]
input = side2n2
type = ExtraNodesetGenerator
coord = '0.0 1.0 1.0'
boundary = 10
[../]
[./side3n2]
input = side3n1
type = ExtraNodesetGenerator
coord = '1.0 1.0 1.0'
boundary = 11
[../]
[./side4n1]
input = side3n2
type = ExtraNodesetGenerator
coord = '0.0 0.0 1.0'
boundary = 12
[../]
[./side4n2]
input = side4n1
type = ExtraNodesetGenerator
coord = '1.0 0.0 1.0'
boundary = 13
[../]
[]
[Variables]
[./ux]
block = 0
[../]
[./uy]
block = 0
[../]
[./uz]
block = 0
[../]
[]
[Functions]
[./side2uxfunc]
type = ParsedFunction
value = cos(pi/2*t)-1
[../]
[./side2uyfunc]
type = ParsedFunction
value = sin(pi/2*t)
[../]
[./side3uxfunc]
type = ParsedFunction
value = cos(pi/2*t)-sin(pi/2*t)-1
[../]
[./side3uyfunc]
type = ParsedFunction
value = cos(pi/2*t)+sin(pi/2*t)-1
[../]
[./side4uxfunc]
type = ParsedFunction
value = -sin(pi/2*t)
[../]
[./side4uyfunc]
type = ParsedFunction
value = cos(pi/2*t)-1
[../]
[]
[BCs]
active = 'bcside1 bcside2ux bcside2uy bcside4ux bcside4uy bcside3uy bcside3ux bcx'
[./bcside1]
type = DirichletBC
variable = 'uy uz'
boundary = '6 7'
value = 0
[../]
[./bcside2ux]
type = FunctionDirichletBC
variable = uy
boundary = '8 9'
function = side2uxfunc
[../]
[./bcside2uy]
type = FunctionDirichletBC
variable = uz
boundary = '8 9'
function = side2uyfunc
[../]
[./bcside3ux]
type = FunctionDirichletBC
variable = uy
boundary = '10 11'
function = side3uxfunc
[../]
[./bcside3uy]
type = FunctionDirichletBC
variable = uz
boundary = '10 11'
function = side3uyfunc
[../]
[./bcside4ux]
type = FunctionDirichletBC
variable = uy
boundary = '12 13'
function = side4uxfunc
[../]
[./bcside4uy]
type = FunctionDirichletBC
variable = uz
boundary = '12 13'
function = side4uyfunc
[../]
[./bot]
type = DirichletBC
variable = 'ux uy uz'
boundary = back
value = 0
[../]
[./topxz]
type = DirichletBC
variable = 'ux uz'
boundary = front
value = 0
[../]
[./topy]
type = DirichletBC
variable = uy
boundary = front
value = 1
[../]
[./bcx]
type = DirichletBC
variable = ux
boundary = '6 7 8 9 10 11 12 13'
value = 0
[../]
[]
[Materials]
[./crysp]
type = FiniteStrainCrystalPlasticity
block = 0
disp_y = uy
disp_x = ux
slip_sys_file_name = input_slip_sys.txt
disp_z = uz
flowprops = ' 1 12 0.001 0.1'
C_ijkl = '1.684e5 1.214e5 1.214e5 1.684e5 1.214e5 1.684e5 .754e5 .754e5 .754e5'
nss = 12
hprops = '1 541.5 60.8 109.8'
gprops = '1 12 60.8'
fill_method = symmetric9
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
dt = 0.01
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = -pc_hypre_type
petsc_options_value = boomerang
dtmax = 0.01
end_time = 1
dtmin = 0.01
[]
[Outputs]
file_base = rot_eg1
solution_history = true
[./exodus]
type = Exodus
use_displaced = true
[../]
[]
[TensorMechanics]
[./tensormech]
disp_z = uz
disp_y = uy
disp_x = ux
[../]
[]
test/tests/outputs/iterative/iterative.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
nonlinear_residual_dt_divisor = 100
linear_residual_dt_divisor = 100
start_time = 1.8
end_time = 1.85
execute_on = 'nonlinear linear timestep_end'
[../]
[]
modules/combined/test/tests/frictional_contact/sliding_elastic_blocks_2d/sliding_elastic_blocks_2d_tp.i
[Mesh]
file = sliding_elastic_blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
save_in = 'saved_x saved_y'
diag_save_in = 'diag_saved_x diag_saved_y'
[../]
[]
[AuxKernels]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
quantity = incremental_slip_x
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
quantity = incremental_slip_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip]
type = PenetrationAux
variable = accum_slip
execute_on = timestep_end
quantity = accumulated_slip
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_x]
type = PenetrationAux
variable = tang_force_x
execute_on = timestep_end
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tangential_force_y]
type = PenetrationAux
variable = tang_force_y
execute_on = timestep_end
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.005
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.05
num_steps = 1000
nl_rel_tol = 1e-16
nl_abs_tol = 1e-09
dtmin = 0.01
l_tol = 1e-3
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
system = constraint
formulation = tangential_penalty
friction_coefficient = '0.25'
penalty = 1e6
[../]
[]
[Dampers]
[./contact_slip]
type = ContactSlipDamper
slave = 3
master = 2
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_2/ring2_template2.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = ring2_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/simplest_contact/simplest_contact_skew_test.i
[Mesh]
file = simplest_contact_skew.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
[../]
[]
[Constraints]
[./contact_x]
type = MultiDContactConstraint
variable = disp_x
master_variable = disp_x
component = 0
slave = 2
master = 3
penalty = 1e6
[../]
[./contact_y]
type = MultiDContactConstraint
variable = disp_y
master_variable = disp_y
component = 1
slave = 2
master = 3
penalty = 1e6
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
#petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
#petsc_options_value = 'hypre boomeramg 101'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/gravity/gravity_sm.i
# Gravity Test
#
# This test is designed to exercise the gravity body force kernel.
#
# The mesh for this problem is a rectangular bar 10 units by 1 unit
# by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero on each of side that faces a negative
# coordinate direction. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(x) = -b*x^2/(2*E)+b*L*x/E
#
# The displacement at x=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(x) = b*(L-x)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at x=0. The stress
# is reported at element centers. The element closest to x=0 sits
# at x = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at x = L where the stress is zero analytically. The nearest
# element is at x=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = gravity_test.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_x
value = 20
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 5
value = 0.0
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
youngs_modulus = 1e6
bulk_modulus = 0.333333333333333e6
[../]
[./density]
type = Density
block = 1
density = 2
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = gravity_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template2_sm.i
[Mesh]
file = plane4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/ics/function_ic/spline_function.i
#
# Test the gradient calculation in spline function and the gradient pass-through in FunctionIC
#
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 3
ymin = 0
ymax = 1
nx = 10
ny = 2
[]
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Functions]
[./spline_function]
type = SplineFunction
x = '0 1 2 3'
y = '0 1 0 1'
[../]
[]
[ICs]
[./u_ic]
type = FunctionIC
variable = 'u'
function = spline_function
[../]
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
[]
[Outputs]
file_base = spline
[./OverSampling]
type = Exodus
refinements = 3
[../]
[]
modules/rdg/test/tests/advection_1d/1d_aefv_square_wave.i
############################################################
[GlobalParams]
order = CONSTANT
family = MONOMIAL
u = u
slope_limiting = lslope
implicit = false
[]
############################################################
[Mesh]
type = GeneratedMesh
dim = 1
xmin = 0
xmax = 1
nx = 100
[]
############################################################
[Functions]
[./ic_u]
type = PiecewiseConstant
axis = x
direction = right
xy_data = '0.1 0.5
0.6 1.0
1.0 0.5'
[../]
[]
############################################################
[UserObjects]
[./lslope]
type = AEFVSlopeLimitingOneD
execute_on = 'linear'
scheme = 'none' #none | minmod | mc | superbee
[../]
[./internal_side_flux]
type = AEFVUpwindInternalSideFlux
execute_on = 'linear'
[../]
[./free_outflow_bc]
type = AEFVFreeOutflowBoundaryFlux
execute_on = 'linear'
[../]
[]
############################################################
[Variables]
[./u]
[../]
[]
############################################################
[ICs]
[./u_ic]
type = FunctionIC
variable = 'u'
function = ic_u
[../]
[]
############################################################
[Kernels]
[./time_u]
implicit = true
type = TimeDerivative
variable = u
[../]
[]
############################################################
[DGKernels]
[./concentration]
type = AEFVKernel
variable = u
component = 'concentration'
flux = internal_side_flux
[../]
[]
############################################################
[BCs]
[./concentration]
type = AEFVBC
boundary = 'left right'
variable = u
component = 'concentration'
flux = free_outflow_bc
[../]
[]
############################################################
[Materials]
[./aefv]
type = AEFVMaterial
block = 0
[../]
[]
############################################################
[Executioner]
type = Transient
[./TimeIntegrator]
type = ExplicitMidpoint
[../]
solve_type = 'LINEAR'
l_tol = 1e-4
nl_rel_tol = 1e-20
nl_abs_tol = 1e-8
nl_max_its = 60
start_time = 0.0
num_steps = 4 # 4 | 400 for complete run
dt = 5e-4
dtmin = 1e-6
[]
[Outputs]
[./Exodus]
type = Exodus
file_base = 1d_aefv_square_wave_none_out
interval = 2
[../]
perf_graph = true
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template1_sm.i
[Mesh]
file = plane2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/tensor_mechanics/test/tests/elastic_patch/elastic_patch_quadratic.i
# Patch Test for second order hex elements (HEX20)
#
# From Abaqus, Verification Manual, 1.5.2
#
# This test is designed to compute constant xx, yy, zz, xy, yz, and zx
# stress on a set of irregular hexes. The mesh is composed of one
# block with seven elements. The elements form a unit cube with one
# internal element. There is a nodeset for each exterior node.
# The cube is displaced on all exterior nodes using the functions,
#
# ux = 1e-4 * (2x + y + z) / 2
# uy = 1e-4 * (x + 2y + z) / 2
# ux = 1e-4 * (x + y + 2z) / 2
#
# giving uniform strains of
#
# exx = eyy = ezz = 2*exy = 2*eyz = 2*exz = 1e-4
#
#
# Hooke's Law provides an analytical solution for the uniform stress state.
# For example,
#
# stress xx = lambda(exx + eyy + ezz) + 2 * G * exx
# stress xy = 2 * G * exy
#
# where:
#
# lambda = (2 * G * nu) / (1 - 2 * nu)
# G = 0.5 * E / (1 + nu)
#
# For the test below, E = 1e6 and nu = 0.25, giving lambda = G = 4e5
#
# Thus
#
# stress xx = 4e5 * (3e-4) + 2 * 4e5 * 1e-4 = 200
# stress xy = 2 * 4e5 * 1e-4 / 2 = 40
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = elastic_patch_quadratic.e
[] # Mesh
[Functions]
[./xDispFunc]
type = ParsedFunction
value = 5e-5*(2*x+y+z)
[../]
[./yDispFunc]
type = ParsedFunction
value = 5e-5*(x+2*y+z)
[../]
[./zDispFunc]
type = ParsedFunction
value = 5e-5*(x+y+2*z)
[../]
[] # Functions
[Variables]
[./disp_x]
order = SECOND
family = LAGRANGE
[../]
[./disp_y]
order = SECOND
family = LAGRANGE
[../]
[./disp_z]
order = SECOND
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_energy]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./hydrostatic]
order = CONSTANT
family = MONOMIAL
[../]
[./firstinv]
order = CONSTANT
family = MONOMIAL
[../]
[./secondinv]
order = CONSTANT
family = MONOMIAL
[../]
[./thirdinv]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
index_i = 0
index_j = 0
variable = stress_xx
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
index_i = 1
index_j = 1
variable = stress_yy
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
index_i = 2
index_j = 2
variable = stress_zz
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
index_i = 0
index_j = 1
variable = stress_xy
[../]
[./stress_yz]
type = RankTwoAux
rank_two_tensor = stress
index_i = 1
index_j = 2
variable = stress_yz
[../]
[./stress_zx]
type = RankTwoAux
rank_two_tensor = stress
index_i = 2
index_j = 0
variable = stress_zx
[../]
[./elastic_energy]
type = ElasticEnergyAux
variable = elastic_energy
[../]
[./vonmises]
type = RankTwoScalarAux
rank_two_tensor = stress
scalar_type = VonMisesStress
variable = vonmises
[../]
[./hydrostatic]
type = RankTwoScalarAux
rank_two_tensor = stress
scalar_type = Hydrostatic
variable = hydrostatic
[../]
[./fi]
type = RankTwoScalarAux
rank_two_tensor = stress
scalar_type = FirstInvariant
variable = firstinv
[../]
[./si]
type = RankTwoScalarAux
rank_two_tensor = stress
scalar_type = SecondInvariant
variable = secondinv
[../]
[./ti]
type = RankTwoScalarAux
rank_two_tensor = stress
scalar_type = ThirdInvariant
variable = thirdinv
[../]
[] # AuxKernels
[BCs]
[./all_nodes_x]
type = FunctionDirichletBC
variable = disp_x
boundary = '1 2 3 4 6 7 8 9 10 12 15 17 18 19 20 21 23 24 25 26'
function = xDispFunc
[../]
[./all_nodes_y]
type = FunctionDirichletBC
variable = disp_y
boundary = '1 2 3 4 6 7 8 9 10 12 15 17 18 19 20 21 23 24 25 26'
function = yDispFunc
[../]
[./all_nodes_z]
type = FunctionDirichletBC
variable = disp_z
boundary = '1 2 3 4 6 7 8 9 10 12 15 17 18 19 20 21 23 24 25 26'
function = zDispFunc
[../]
[] # BCs
[Materials]
[./elast_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
poissons_ratio = 0.25
[../]
[./strain]
type = ComputeSmallStrain
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[] # Materials
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_rel_tol = 1e-6
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 1
end_time = 1.0
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/sliding_block/sliding/constraint/frictionless_aug.i
# This is a benchmark test that checks constraint based frictionless
# contact using the augmented lagrangian method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./saved_x]
[../]
[./saved_y]
[../]
[./contact_traction]
[../]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
dt = 0.1
end_time = 15
num_steps = 200
l_tol = 1e-6
nl_rel_tol = 1e-7
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Problem]
type = AugmentedLagrangianContactProblem
solution_variables = 'disp_x disp_y'
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 25
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
normalize_penalty = true
formulation = augmented_lagrange
tangential_tolerance = 1e-3
system = constraint
normal_smoothing_distance = 0.1
al_penetration_tolerance = 1e-9
[../]
[]
modules/porous_flow/test/tests/infiltration_and_drainage/bw02.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 200
ny = 1
xmin = -10
xmax = 10
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[./dts]
type = PiecewiseLinear
y = '1E-1 5E-1 5E-1'
x = '0 1 10'
[../]
[]
[UserObjects]
[./dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[../]
[./pc]
type = PorousFlowCapillaryPressureBW
Sn = 0.0
Ss = 1.0
C = 1.5
las = 2
[../]
[]
[Modules]
[./FluidProperties]
[./simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 4
density0 = 10
thermal_expansion = 0
[../]
[../]
[]
[Materials]
[./massfrac]
type = PorousFlowMassFraction
[../]
[./temperature]
type = PorousFlowTemperature
[../]
[./simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[../]
[./ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[../]
[./relperm]
type = PorousFlowRelativePermeabilityBW
Sn = 0.0
Ss = 1.0
Kn = 0
Ks = 1
C = 1.5
phase = 0
[../]
[./porosity]
type = PorousFlowPorosityConst
porosity = 0.25
[../]
[./permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[../]
[]
[Variables]
[./pressure]
initial_condition = -9E2
[../]
[]
[Kernels]
[./mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[../]
[./flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-0.1 0 0'
[../]
[]
[AuxVariables]
[./SWater]
family = MONOMIAL
order = CONSTANT
[../]
[]
[AuxKernels]
[./SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[../]
[]
[BCs]
[./recharge]
type = PorousFlowSink
variable = pressure
boundary = right
flux_function = -1.25 # corresponds to Rstar being 0.5 because i have to multiply by density*porosity
[../]
[]
[Preconditioning]
[./andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10000'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 2
[./TimeStepper]
type = FunctionDT
function = dts
[../]
[]
[VectorPostprocessors]
[./swater]
type = LineValueSampler
variable = SWater
start_point = '-10 0 0'
end_point = '10 0 0'
sort_by = x
num_points = 80
execute_on = timestep_end
[../]
[]
[Outputs]
file_base = bw02
sync_times = '0.5 2 8'
[./exodus]
type = Exodus
sync_only = true
[../]
[./along_line]
type = CSV
sync_only = true
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_lm_sm.i
[Mesh]
patch_size = 80
[file]
type = FileMeshGenerator
file = sliding_elastic_blocks_2d.e
[]
[slave]
input = file
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = '30'
[]
[master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '20'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Variables]
[./disp_x]
block = '1 2'
[../]
[./disp_y]
block = '1 2'
[../]
[normal_lm]
block = '30'
[]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
block = '1 2'
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 15
dt = 0.1
dtmin = 0.01
l_max_its = 30
nl_max_its = 20
line_search = 'none'
timestep_tolerance = 1e-6
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
sync_times = '1 2 3 4 5 6 7 8 9 10 11 12 13 14 15'
[out]
type = Exodus
sync_only = true
[]
[dof]
execute_on = 'initial'
type = DOFMap
[]
[csv]
type = CSV
execute_on = 'nonlinear timestep_end'
[]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = 3
master = 2
variable = normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
[../]
[normal_x]
type = NormalMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[normal_y]
type = NormalMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[lin]
type = NumLinearIterations
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '30'
execute_on = 'nonlinear timestep_end'
[]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template1_sm.i
[Mesh]
file = brick2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/elastic_patch/elastic_patch_rz_large_strain_sm.i
# Deprecated: large_strain = true only introduces high order terms in the strain calculation
# but no rotation has been considered in solid mechanics. No such corresponding strain calculator
# in tensor mechanics
#
#
# This problem is adapted from the Abaqus verification manual:
# "1.5.4 Patch test for axisymmetric elements"
#
# For large strain,
# e_rr = 1e-3 + (1e-3)^2
# e_zz = 1e-3 + 0.5*(1e-3)^2
# e_tt = 1e-3 + 0.5*(1e-3)^2
# e_rz = 0.5*(1e-3+(1e-3)^2)
#
# If you multiply these strains through the elasticity tensor for
# axisymmetry, you will obtain the following stresses:
# xx = 2001.6
# yy = zz = 2001.2
# xy = 400.4
#
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Mesh]
file = elastic_patch_rz.e
[]
[Functions]
[./ur]
type = ParsedFunction
value = '1e-3*x'
[../]
[./uz]
type = ParsedFunction
value = '1e-3*(x+y)'
[../]
[./body]
type = ParsedFunction
value = '-400/x'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./temp]
initial_condition = 117.56
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[Kernels]
[./body]
type = BodyForce
variable = disp_y
value = 1
function = body
[../]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[]
[BCs]
[./ur]
type = FunctionDirichletBC
variable = disp_x
boundary = 10
function = ur
[../]
[./uz]
type = FunctionDirichletBC
variable = disp_y
boundary = 10
function = uz
[../]
[./temp]
type = DirichletBC
variable = temp
boundary = 10
value = 117.56
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.25
temp = temp
large_strain = true
[../]
[./heat]
type = HeatConductionMaterial
block = 1
specific_heat = 0.116
thermal_conductivity = 4.85e-4
[../]
[./density]
type = Density
block = 1
density = 0.283
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = elastic_patch_rz_large_strain_out
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/frictionless_penalty.i
# This is a benchmark test that checks constraint based frictionless
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./left_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/navier_stokes/test/tests/ins/mms/supg/supg_mms_test.i
mu=1.5
rho=2.5
[GlobalParams]
gravity = '0 0 0'
supg = true
convective_term = true
integrate_p_by_parts = false
laplace = true
u = vel_x
v = vel_y
p = p
alpha = 1
order = SECOND
family = LAGRANGE
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
elem_type = QUAD9
nx = 4
ny = 4
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./vel_x]
[../]
[./vel_y]
[../]
[./p]
order = FIRST
[../]
[]
[Kernels]
# mass
[./mass]
type = INSMass
variable = p
[../]
# x-momentum, space
[./x_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_x
component = 0
forcing_func = vel_x_source_func
[../]
# y-momentum, space
[./y_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_y
component = 1
forcing_func = vel_y_source_func
[../]
[./p_source]
type = BodyForce
function = p_source_func
variable = p
[../]
[]
[BCs]
[./vel_x]
type = FunctionDirichletBC
preset = false
boundary = 'left right top bottom'
function = vel_x_func
variable = vel_x
[../]
[./vel_y]
type = FunctionDirichletBC
preset = false
boundary = 'left right top bottom'
function = vel_y_func
variable = vel_y
[../]
[./p]
type = FunctionDirichletBC
preset = false
boundary = 'left right top bottom'
function = p_func
variable = p
[../]
[]
[Functions]
[./vel_x_source_func]
type = ParsedFunction
value = '-${mu}*(-0.028*pi^2*x^2*sin(0.2*pi*x*y) - 0.028*pi^2*y^2*sin(0.2*pi*x*y) - 0.1*pi^2*sin(0.5*pi*x) - 0.4*pi^2*sin(pi*y)) + ${rho}*(0.14*pi*x*cos(0.2*pi*x*y) + 0.4*pi*cos(pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*y*cos(0.2*pi*x*y) + 0.25*pi*cos(0.5*pi*x)'
[../]
[./vel_y_source_func]
type = ParsedFunction
value = '-${mu}*(-0.018*pi^2*x^2*sin(0.3*pi*x*y) - 0.018*pi^2*y^2*sin(0.3*pi*x*y) - 0.384*pi^2*sin(0.8*pi*x) - 0.027*pi^2*sin(0.3*pi*y)) + ${rho}*(0.06*pi*x*cos(0.3*pi*x*y) + 0.09*pi*cos(0.3*pi*y))*(0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3) + ${rho}*(0.06*pi*y*cos(0.3*pi*x*y) + 0.48*pi*cos(0.8*pi*x))*(0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5) + 0.1*pi*x*cos(0.2*pi*x*y) + 0.3*pi*cos(0.3*pi*y)'
[../]
[./p_source_func]
type = ParsedFunction
value = '-0.06*pi*x*cos(0.3*pi*x*y) - 0.14*pi*y*cos(0.2*pi*x*y) - 0.2*pi*cos(0.5*pi*x) - 0.09*pi*cos(0.3*pi*y)'
[../]
[./vel_x_func]
type = ParsedFunction
value = '0.4*sin(0.5*pi*x) + 0.4*sin(pi*y) + 0.7*sin(0.2*pi*x*y) + 0.5'
[../]
[./vel_y_func]
type = ParsedFunction
value = '0.6*sin(0.8*pi*x) + 0.3*sin(0.3*pi*y) + 0.2*sin(0.3*pi*x*y) + 0.3'
[../]
[./p_func]
type = ParsedFunction
value = '0.5*sin(0.5*pi*x) + 1.0*sin(0.3*pi*y) + 0.5*sin(0.2*pi*x*y) + 0.5'
[../]
[./vxx_func]
type = ParsedFunction
value = '0.14*pi*y*cos(0.2*pi*x*y) + 0.2*pi*cos(0.5*pi*x)'
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 0
prop_names = 'rho mu'
prop_values = '${rho} ${mu}'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
[./exodus]
type = Exodus
[../]
[./csv]
type = CSV
[../]
[]
[Postprocessors]
[./L2vel_x]
type = ElementL2Error
variable = vel_x
function = vel_x_func
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vel_y]
variable = vel_y
function = vel_y_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2p]
variable = p
function = p_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2vxx]
variable = vxx
function = vxx_func
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
[AuxVariables]
[./vxx]
family = MONOMIAL
order = FIRST
[../]
[]
[AuxKernels]
[./vxx]
type = VariableGradientComponent
component = x
variable = vxx
gradient_variable = vel_x
[../]
[]
test/tests/outputs/variables/output_vars_test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 10
ny = 10
elem_type = QUAD9
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = SECOND
family = LAGRANGE
[../]
# ODE variables
[./x]
family = SCALAR
order = FIRST
initial_condition = 1
[../]
[./y]
family = SCALAR
order = FIRST
initial_condition = 2
[../]
[]
[AuxVariables]
[./elemental]
order = CONSTANT
family = MONOMIAL
[../]
[./elemental_restricted]
order = CONSTANT
family = MONOMIAL
[../]
[./nodal]
order = FIRST
family = LAGRANGE
[../]
[./nodal_restricted]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./td]
type = TimeDerivative
variable = u
[../]
[./diff_u]
type = Diffusion
variable = u
[../]
[./conv_u]
type = CoupledForce
variable = u
v = v
[../]
[./diff_v]
type = Diffusion
variable = v
[../]
[]
[AuxKernels]
[./elemental]
type = ConstantAux
variable = elemental
value = 1
[../]
[./elemental_restricted]
type = ConstantAux
variable = elemental_restricted
value = 1
[../]
[./nodal]
type = ConstantAux
variable = elemental
value = 2
[../]
[./nodal_restricted]
type = ConstantAux
variable = elemental_restricted
value = 2
[../]
[]
[ScalarKernels]
[./td1]
type = ODETimeDerivative
variable = x
[../]
[./ode1]
type = ImplicitODEx
variable = x
y = y
[../]
[./td2]
type = ODETimeDerivative
variable = y
[../]
[./ode2]
type = ImplicitODEy
variable = y
x = x
[../]
[]
[BCs]
active = 'left_u right_u left_v'
[./left_u]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[./right_u]
type = DirichletBC
variable = u
boundary = 3
value = 9
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = 1
value = 5
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = 2
value = 2
[../]
[]
[Postprocessors]
[./x]
type = ScalarVariable
variable = x
execute_on = 'initial timestep_end'
[../]
[./y]
type = ScalarVariable
variable = y
execute_on = 'initial timestep_end'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.01
num_steps = 1
[]
[Outputs]
show = 'x u nodal elemental'
[./out]
type = Exodus
elemental_as_nodal = true
scalar_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template2.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl3_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+11
al_penetration_tolerance = 1e-8
[../]
[]
modules/tensor_mechanics/test/tests/material_limit_time_step/creep/nafems_test5a_lim.i
[GlobalParams]
temperature = temp
order = FIRST
family = LAGRANGE
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane1_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
group_variables = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./temp]
initial_condition = 1500.0
[../]
[./creep]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./pressure]
order = CONSTANT
family = MONOMIAL
[../]
[./invariant3]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./creep_strain_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./elastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./creep_aux]
type = MaterialRealAux
property = effective_creep_strain
variable = creep
[../]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[../]
[./vonmises]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = vonmises
scalar_type = VonMisesStress
[../]
[./pressure]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = pressure
scalar_type = Hydrostatic
[../]
[./invariant3]
type = RankTwoScalarAux
rank_two_tensor = stress
variable = invariant3
scalar_type = ThirdInvariant
[../]
[./creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
[../]
[./creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
[../]
[./creep_strain_zz]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_zz
index_i = 2
index_j = 2
[../]
[./creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
[../]
[./elastic_str_xx_aux]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = elastic_strain_xx
index_i = 0
index_j = 0
[../]
[./elastic_str_yy_aux]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = elastic_strain_yy
index_i = 1
index_j = 1
[../]
[./elastic_str_zz_aux]
type = RankTwoAux
rank_two_tensor = elastic_strain
variable = elastic_strain_zz
index_i = 2
index_j = 2
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 3
component = 1
factor = -100.0
[../]
[./side_press]
type = Pressure
variable = disp_x
boundary = 4
component = 0
factor = -200.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 200e3
poissons_ratio = 0.3
[../]
[./strain]
type = ComputePlaneFiniteStrain
block = 1
[../]
[./radial_return_stress]
type = ComputeMultipleInelasticStress
block = 1
inelastic_models = 'powerlawcrp'
[../]
[./powerlawcrp]
type = PowerLawCreepStressUpdate
block = 1
coefficient = 3.125e-14
n_exponent = 5.0
m_exponent = 0.0
activation_energy = 0.0
max_inelastic_increment = 0.01
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
line_search = 'none'
l_max_its = 50
nl_max_its = 100
end_time = 1000.0
num_steps = 10000
l_tol = 1e-3
[./TimeStepper]
type = IterationAdaptiveDT
dt = 1e-6
time_t = '1e-6 2e-6 3e-6 5e-6 9e-6 1.7e-5 3.3e-5 6.5e-5 1.29e-4 2.57e-4 5.13e-4 1.025e-3 2.049e-3 4.097e-3 8.193e-3 1.638e-2 3.276e-2 5.734e-2 0.106 0.180 0.291 0.457 0.706 1.08 1.64 2.48 3.74 5.63 8.46 12.7 19.1 28.7 43.0 64.5 108.0 194.0 366.0 710.0 1000.0'
time_dt = '1e-6 1e-6 2e-6 4e-6 8e-6 1.6e-5 3.2e-5 6.4e-5 1.28e-4 2.56e-4 5.12e-4 1.024e-3 2.048e-3 4.096e-3 8.192e-3 1.6384e-2 2.458e-2 4.915e-2 7.40e-2 0.111 0.166 0.249 0.374 0.560 0.840 1.26 1.89 2.83 4.25 6.40 9.6 14.3 21.5 43.0 86.1 172.0 344.0 290.0 290.0'
optimal_iterations = 30
iteration_window = 9
growth_factor = 2.0
cutback_factor = 0.5
timestep_limiting_postprocessor = matl_ts_min
[../]
[]
[Postprocessors]
[./matl_ts_min]
type = MaterialTimeStepPostprocessor
[../]
[./sigma_xx]
type = ElementAverageValue
variable = stress_xx
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./vonmises]
type = ElementAverageValue
variable = vonmises
[../]
[./pressure]
type = ElementAverageValue
variable = pressure
[../]
[./invariant3]
type = ElementAverageValue
variable = invariant3
[../]
[./eps_crp_xx]
type = ElementAverageValue
variable = creep_strain_xx
[../]
[./eps_crp_yy]
type = ElementAverageValue
variable = creep_strain_yy
[../]
[./eps_crp_zz]
type = ElementAverageValue
variable = creep_strain_zz
[../]
[./eps_crp_mag]
type = ElementAverageValue
variable = creep
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x3]
type = NodalVariableValue
nodeid = 2
variable = disp_x
[../]
[./disp_y3]
type = NodalVariableValue
nodeid = 2
variable = disp_y
[../]
[./disp_y4]
type = NodalVariableValue
nodeid = 3
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./elas_str_xx]
type = ElementAverageValue
variable = elastic_strain_xx
[../]
[./elas_str_yy]
type = ElementAverageValue
variable = elastic_strain_yy
[../]
[./elas_str_zz]
type = ElementAverageValue
variable = elastic_strain_zz
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 25
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/sm/frictionless_penalty_contact_line_search_sm.i
# This is a benchmark test that checks constraint based frictionless
# contact using the penalty method. In this test a sinusoidal
# displacement is applied in the horizontal direction to simulate
# a small block come in and out of contact as it slides down a larger block.
#
# The sinusoid is of the form 0.4sin(4t)+0.2. The gold file is run
# on one processor and the benchmark
# case is run on a minimum of 4 processors to ensure no parallel variability
# in the contact pressure and penetration results. Further documentation can
# found in moose/modules/contact/doc/sliding_block/
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[./tot_nonlin_it]
type = CumulativeValuePostprocessor
postprocessor = nonlinear_its
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-ksp_monitor_true_residual'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'contact'
contact_line_search_ltol = .5
contact_line_search_allowed_lambda_cuts = 0
l_max_its = 100
nl_max_its = 20
dt = 0.1
end_time = 3
# num_steps = 30
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[]
[Outputs]
perf_graph = true
print_linear_residuals = false
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/tensor_mechanics/test/tests/recompute_radial_return/isotropic_plasticity_errors.i
# This simulation uses the piece-wise linear strain hardening model
# with the incremental small strain formulation; incremental small strain
# is required to produce the strain_increment for the DiscreteRadialReturnStressIncrement
# class, which handles the calculation of the stress increment to return
# to the yield surface in a J2 (isotropic) plasticity problem.
#
# This test is used to check the error messages in the discrete radial return
# model DiscreteRRIsotropicPlasticity; cli_args are used to check all of the
# error messages in the DiscreteRRIsotropicPlasticity model.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(0.0625)
[../]
[./harden_func]
type = PiecewiseLinear
x = '0 0.0003 0.0007 0.0009'
y = '50 52 54 56'
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = SMALL
incremental = true
add_variables = true
generate_output = 'stress_yy plastic_strain_xx plastic_strain_yy plastic_strain_zz'
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = top
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = left
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = back
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
[../]
[./isotropic_plasticity]
type = IsotropicPlasticityStressUpdate
relative_tolerance = 1e-25
absolute_tolerance = 1e-5
[../]
[./radial_return_stress]
type = ComputeMultipleInelasticStress
tangent_operator = elastic
inelastic_models = 'isotropic_plasticity'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-18
nl_abs_tol = 1e-10
l_tol = 1e-12
start_time = 0.0
end_time = 0.025
dt = 0.00125
dtmin = 0.0001
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/oversample/over_sampling_test_file.i
[Mesh]
type = FileMesh
file = square_3x3.e
[]
[Functions]
[./exact_fn]
type = ParsedFunction
value = t*((x*x)+(y*y))
[../]
[./forcing_fn]
type = ParsedFunction
value = -4+(x*x+y*y)
[../]
[]
[Variables]
active = 'u'
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
active = 'ie diff ffn'
[./ie]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./all]
type = FunctionDirichletBC
variable = u
boundary = '1 2 3 4'
function = exact_fn
[../]
[]
[Postprocessors]
[./dt]
type = TimestepSize
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
dt = 0.2
start_time = 0
num_steps = 5
[]
[Outputs]
file_base = out_file
exodus = true
[./oversampling]
file_base = out_file_oversample
type = Exodus
refinements = 3
[../]
[]
modules/tensor_mechanics/test/tests/2D_different_planes/planestrain_xy.i
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = square_xy_plane.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./temp]
[../]
[]
[Modules/TensorMechanics/Master]
[./plane_strain]
block = 1
strain = SMALL
out_of_plane_direction = z
planar_formulation = PLANE_STRAIN
eigenstrain_names = 'eigenstrain'
generate_output = 'stress_xx stress_xy stress_yy stress_zz strain_xx strain_xy strain_yy strain_zz'
[../]
[]
[AuxKernels]
[./tempfuncaux]
type = FunctionAux
variable = temp
function = tempfunc
[../]
[]
[Functions]
[./tempfunc]
type = ParsedFunction
value = '(1-x)*t'
[../]
[]
[BCs]
[./bottomx]
type = DirichletBC
boundary = 3
variable = disp_x
value = 0.0
[../]
[./bottomy]
type = DirichletBC
boundary = 3
variable = disp_y
value = 0.0
[../]
[]
[Materials]
[./elastic_stress]
type = ComputeLinearElasticStress
block = 1
[../]
[./thermal_strain]
type = ComputeThermalExpansionEigenstrain
temperature = temp
thermal_expansion_coeff = 0.02
stress_free_temperature = 0.5
eigenstrain_name = eigenstrain
[../]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = 1
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
line_search = none
# controls for linear iterations
l_max_its = 100
l_tol = 1e-10
# controls for nonlinear iterations
nl_max_its = 10
nl_rel_tol = 1e-12
# time control
start_time = 0.0
dt = 1.0
dtmin = 1.0
end_time = 2.0
[]
[Outputs]
file_base = planestrain_xy_small_out
[./exodus]
type = Exodus
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_1/ring1_mu_0_2_pen_sm.i
[Mesh]
file = ring1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = ring1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = ring1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/simple_contact/merged.i
[GlobalParams]
volumetric_locking_correction= false
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = merged.e
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
incremental = true
generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx'
[../]
[]
[DiracKernels]
[./master_x]
type = ContactMaster
variable = disp_x
component = 0
boundary = 3
slave = 2
[../]
[./master_y]
type = ContactMaster
variable = disp_y
component = 1
boundary = 3
slave = 2
[../]
[./master_z]
type = ContactMaster
variable = disp_z
component = 2
boundary = 3
slave = 2
[../]
[./slave_x]
type = SlaveConstraint
variable = disp_x
component = 0
boundary = 2
master = 3
[../]
[./slave_y]
type = SlaveConstraint
variable = disp_y
component = 1
boundary = 2
master = 3
[../]
[./slave_z]
type = SlaveConstraint
variable = disp_z
component = 2
boundary = 2
master = 3
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./left_z]
type = DirichletBC
variable = disp_z
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[./right_z]
type = DirichletBC
variable = disp_z
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 20
dt = 1.0
num_steps = 1
[]
[Outputs]
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/exodus/variable_output_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
nz = 0
zmax = 0
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./aux]
family = SCALAR
[../]
[]
[Functions]
[./force]
type = ParsedFunction
value = t
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./force]
type = BodyForce
variable = u
function = force
[../]
[]
[BCs]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[]
[Executioner]
type = Transient
num_steps = 4
dt = 1
solve_type = PJFNK
[]
[Adaptivity]
steps = 1
marker = box
max_h_level = 2
[./Markers]
[./box]
bottom_left = '0.3 0.3 0'
inside = refine
top_right = '0.6 0.6 0'
outside = do_nothing
type = BoxMarker
[../]
[../]
[]
[Postprocessors]
[./aux_pp]
type = ScalarVariable
variable = aux
outputs = none
[../]
[]
[Outputs]
execute_on = 'timestep_end'
[./exodus]
type = Exodus
file_base = new_out
hide_variables = 'u box aux_pp'
scalar_as_nodal = true
execute_scalars_on = none
[../]
[./console]
Type = Console
[../]
[]
modules/combined/test/tests/simple_contact/sm/merged_rz_sm.i
[Mesh]
file = merged_rz.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[Problem]
coord_type = RZ
[]
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0 1'
y = '0 1'
scale_factor = 100
[../]
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./bottom_y]
type = DirichletBC
variable = disp_y
boundary = 10
value = 0.0
[../]
[./right_pressure]
type = PressureRZ
variable = disp_x
component = 0
boundary = 4
function = pressure
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff2]
type = Elastic
block = 2
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
line_search = 'none'
nl_abs_tol = 1e-8
l_max_its = 20
dt = 1.0
end_time = 1.0
[]
[Outputs]
file_base = merged_rz_out
[./exodus]
type = Exodus
elemental_as_nodal = true
execute_on = 'initial timestep_end linear'
[../]
[]
modules/navier_stokes/test/tests/ins/velocity_channel/velocity_inletBC_no_parts.i
# This input file tests outflow boundary conditions for the incompressible NS equations.
[GlobalParams]
gravity = '0 0 0'
integrate_p_by_parts = false
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 3.0
ymin = 0
ymax = 1.0
nx = 30
ny = 10
elem_type = QUAD9
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = top_right
coord = '3 1'
input = gen
[../]
[]
[Variables]
[./vel_x]
order = SECOND
family = LAGRANGE
[../]
[./vel_y]
order = SECOND
family = LAGRANGE
[../]
[./p]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./mass]
type = INSMass
variable = p
u = vel_x
v = vel_y
p = p
[../]
[./x_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_x
u = vel_x
v = vel_y
p = p
component = 0
[../]
[./y_momentum_space]
type = INSMomentumLaplaceForm
variable = vel_y
u = vel_x
v = vel_y
p = p
component = 1
[../]
[]
[BCs]
[./x_no_slip]
type = DirichletBC
variable = vel_x
boundary = 'top bottom'
value = 0.0
[../]
[./y_no_slip]
type = DirichletBC
variable = vel_y
boundary = 'left top bottom'
value = 0.0
[../]
[./x_inlet]
type = FunctionDirichletBC
variable = vel_x
boundary = 'left'
function = 'inlet_func'
[../]
[./p_corner]
# Since the pressure is not integrated by parts in this example,
# it is only specified up to a constant by the natural outflow BC.
# Therefore, we need to pin its value at a single location.
type = DirichletBC
boundary = top_right
value = 0
variable = p
[../]
[]
[Materials]
[./const]
type = GenericConstantMaterial
block = 0
prop_names = 'rho mu'
prop_values = '1 1'
[../]
[]
[Preconditioning]
[./SMP_PJFNK]
type = SMP
full = true
solve_type = NEWTON
[../]
[]
[Executioner]
type = Steady
petsc_options_iname = '-ksp_gmres_restart -pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = '300 bjacobi ilu 4'
line_search = none
nl_rel_tol = 1e-12
nl_max_its = 6
l_tol = 1e-6
l_max_its = 300
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
[Functions]
[./inlet_func]
type = ParsedFunction
value = '-4 * (y - 0.5)^2 + 1'
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/frictional_02_aug.i
# This is a benchmark test that checks constraint based frictional
# contact using the augmented lagrangian method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# A friction coefficient of 0.2 is used. The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = false
[]
[AuxVariables]
[./contact_traction]
[../]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 20
nl_max_its = 200
dt = 0.1
end_time = 15
num_steps = 200
l_tol = 1e-6
nl_rel_tol = 1e-8
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Problem]
type = AugmentedLagrangianContactProblem
solution_variables = 'disp_x disp_y'
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 100
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = coulomb
penalty = 1e+7
friction_coefficient = 0.2
formulation = augmented_lagrange
system = constraint
normalize_penalty = true
al_penetration_tolerance = 1e-6
al_incremental_slip_tolerance = 1.0e-2
al_frictional_force_tolerance = 1e-3
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_aug_sm.i
[Mesh]
file = brick2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 100
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
tangential_tolerance = 1e-3
formulation = augmented_lagrange
system = constraint
normalize_penalty = true
penalty = 1e8
model = frictionless
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_kinematic.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = frictionless
penalty = 1e+6
[../]
[]
modules/combined/test/tests/sliding_block/in_and_out/constraint/frictional_lm.i
[Mesh]
patch_size = 80
[file]
type = FileMeshGenerator
file = sliding_elastic_blocks_2d.e
[]
[slave]
input = file
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = '30'
[]
[master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '20'
[]
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[normal_lm]
block = '30'
[]
[tangential_lm]
block = '30'
family = MONOMIAL
order = CONSTANT
[]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = horizontal_movement
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
block = '1 2'
[../]
[]
[Materials]
[./tensor]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 15
dt = 0.1
dtmin = 0.01
l_max_its = 30
nl_max_its = 20
line_search = 'none'
timestep_tolerance = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
sync_times = '1 2 3 4 5 6 7 8 9 10 11 12 13 14 15'
[out]
type = Exodus
sync_only = true
[]
[dof]
execute_on = 'initial'
type = DOFMap
[]
[csv]
type = CSV
execute_on = 'nonlinear timestep_end'
[]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[./horizontal_movement]
type = ParsedFunction
value = -0.04*sin(4*t)+0.02
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = 3
master = 2
variable = normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
c = 1e6 # relative scale difference between pressure and gap
[../]
[normal_x]
type = NormalMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[normal_y]
type = NormalMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_lm]
type = TangentialMortarLMMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = tangential_lm
slave_variable = disp_x
slave_disp_y = disp_y
use_displaced_mesh = true
compute_primal_residuals = false
contact_pressure = normal_lm
friction_coefficient = .4
ncp_function_type = fb
c = 1000 # relative scale difference between pressure and velocity
[]
[tangential_x]
type = TangentialMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = tangential_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_y]
type = TangentialMortarMechanicalContact
master_boundary = '2'
slave_boundary = '3'
master_subdomain = '20'
slave_subdomain = '30'
variable = tangential_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[lin]
type = NumLinearIterations
[]
[cum_lin]
type = CumulativeValuePostprocessor
postprocessor = lin
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '30'
execute_on = 'nonlinear timestep_end'
[]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane4_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/meshgenerators/centroid_partitioner/centroid_partitioner_mg.i
[Mesh]
[./gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 100
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 10.0
# The centroid partitioner orders elements based on
# the position of their centroids
partitioner = centroid
# This will order the elements based on the y value of
# their centroid. Perfect for meshes predominantly in
# one direction
centroid_partitioner_direction = y
# The centroid partitioner behaves differently depending on
# whether you are using Serial or DistributedMesh, so to get
# repeatable results, we restrict this test to using ReplicatedMesh.
parallel_type = replicated
[]
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./proc_id]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff'
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
[./proc_id]
type = ProcessorIDAux
variable = proc_id
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/ics/function_ic/parsed_function.i
#
# Test the automatically generated gradients in ParsedFunction and the gradient pass-through in FunctionIC
# OLD MOOSE behavior was for parsed_function to behave the sam eas parsed_zerograd_function
# NEW MOOSE behavior is for parsed_function to behave the same as parsed_grad_function
#
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 3.141
ymin = 0
ymax = 3.141
nx = 10
ny = 10
[]
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Functions]
[./parsed_function]
type = ParsedFunction
value = 'sin(x)-cos(y/2)'
[../]
[./parsed_grad_function]
type =ParsedGradFunction
value = 'sin(x)-cos(y/2)'
grad_x = 'cos(x)'
grad_y = 'sin(y/2)/2'
[../]
[./parsed_zerograd_function]
type = ParsedGradFunction
value = 'sin(x)-cos(y/2)'
grad_x = '0'
grad_y = '0'
[../]
[]
[ICs]
[./u_ic]
type = FunctionIC
variable = 'u'
function = parsed_function
[../]
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
[]
[Outputs]
file_base = parsed
[./OverSampling]
type = Exodus
refinements = 3
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_1/plane1_template2_sm.i
[Mesh]
file = plane1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 200
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_x = diag_saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_kinematic_sm.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = frictionless
penalty = 1e+6
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart1_sm.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
order = FIRST
family = LAGRANGE
block = 1
[]
[Mesh]
file = 1hex8_10mm_cube.e
displacements = 'disp_x disp_y disp_z'
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
x = '0 1e6 2e6 2.001e6 2.002e6'
y = '0 3e8 3e8 12e8 0'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
initial_condition = 300.0
[../]
[]
[AuxVariables]
[./vonmises_stress]
order = CONSTANT
family = MONOMIAL
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[AuxKernels]
[./vonmises_stress]
type = MaterialTensorAux
tensor = stress
variable = vonmises_stress
quantity = vonmises
execute_on = timestep_end
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elastic]
type = Elastic
youngs_modulus = 300e6
poissons_ratio = .3
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
temp = temp
thermal_expansion = 5e-6
formulation = Nonlinear3D
increment_calculation = Eigen
stress_free_temperature = 300.0
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
start_time = 0.0
num_steps = 65
end_time = 2.002e6
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e7
dt = 1e6
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'initial timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[./checkpoint]
type = Checkpoint
num_files = 1
[../]
[]
test/tests/variables/previous_newton_iteration/test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 2
ny = 2
elem_type = QUAD9
[]
[Functions]
[./v_fn]
type = ParsedFunction
value = -4+(x*x+y*y)+1
[../]
[./left_u_bc_fn]
type = ParsedFunction
value = -2*x
[../]
[./top_u_bc_fn]
type = ParsedFunction
value = 2*y
[../]
[./right_u_bc_fn]
type = ParsedFunction
value = 2*x
[../]
[./bottom_u_bc_fn]
type = ParsedFunction
value = -2*y
[../]
[]
[AuxVariables]
[./a]
order = SECOND
[../]
[./v]
order = SECOND
[../]
[]
[AuxKernels]
[./ak_a]
type = QuotientAux
variable = a
numerator = v
denominator = u
[../]
[./ak_v]
type = FunctionAux
variable = v
function = v_fn
[../]
[]
[Variables]
[./u]
order = SECOND
[../]
[]
[ICs]
[./u_ic]
type = ConstantIC
variable = u
value = 1
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./react]
type = Reaction
variable = u
[../]
[./cv_u]
type = CoupledForceLagged
variable = u
v = v
[../]
[]
[BCs]
[./u_bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = left_u_bc_fn
[../]
[./u_bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = top_u_bc_fn
[../]
[./u_bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = right_u_bc_fn
[../]
[./u_bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bottom_u_bc_fn
[../]
[]
[Preconditioning]
[./pc]
type = SMP
full = true
solve_type = PJFNK
[../]
[]
[Executioner]
type = Steady
# to get multiple NL iterations
l_tol = 1e-3
nl_rel_tol = 1e-10
[]
[Outputs]
[./out]
type = Exodus
execute_on = 'nonlinear'
[../]
[]
test/tests/postprocessors/displaced_mesh/elemental.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
displacements = 'ux uy'
[]
[AuxVariables]
[./ux]
[./InitialCondition]
type = FunctionIC
function = x
[../]
[../]
[./uy]
[./InitialCondition]
type = FunctionIC
function = y
[../]
[../]
[./c]
initial_condition = 1
[../]
[]
[Variables]
[./a]
[../]
[]
[Kernels]
[./a]
type = Diffusion
variable = a
[../]
[]
[Postprocessors]
[./without]
type = ElementIntegralVariablePostprocessor
variable = c
execute_on = initial
[../]
[./with]
type = ElementIntegralVariablePostprocessor
variable = c
use_displaced_mesh = true
execute_on = initial
[../]
[]
[Problem]
solve = false
[]
[Executioner]
type = Transient
num_steps = 0
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
modules/combined/test/tests/sliding_block/sliding/dirac/frictionless_penalty.i
# This is a benchmark test that checks Dirac based frictionless
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./stiffStuff]
type = ComputeIsotropicElasticityTensor
block = '1 2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stiffStuff_stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[] # Materials
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 100
nl_max_its = 1000
dt = 0.05
end_time = 10
num_steps = 1000
nl_rel_tol = 1e-6
dtmin = 0.01
l_tol = 1e-6
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
normal_smoothing_distance = 0.1
system = DiracKernel
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/glued_kinematic.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = glued
penalty = 1e+6
[../]
[]
modules/phase_field/test/tests/actions/both_direct_2vars.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 9
ny = 6
xmin = 10
xmax = 40
ymin = 15
ymax = 35
elem_type = QUAD
[]
[Modules]
[./PhaseField]
[./Conserved]
[./c]
free_energy = F
mobility = 1.0
kappa = 20.0
args = 'eta'
solve_type = direct
[../]
[../]
[./Nonconserved]
[./eta]
free_energy = F
mobility = 1.0
kappa = 20
args = 'c'
family = HERMITE
order = THIRD
[../]
[../]
[../]
[]
[ICs]
[./c_IC]
type = BoundingBoxIC
variable = c
x1 = 10
x2 = 25
y1 = 15
y2 = 35
inside = 0.1
outside = 0.9
[../]
[./eta_IC]
type = ConstantIC
variable = eta
value = 0.5
[../]
[]
[Materials]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'eta c'
function = '(1 - eta)*10.0*(c - 0.1)^2 + eta*(8.0*(c - 0.9)^2) + 10.0*eta^2*(1-eta)^2'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_type'
petsc_options_value = 'asm lu'
l_max_its = 15
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-11
start_time = 0.0
num_steps = 5
dt = 0.05
[]
[Outputs]
perf_graph = true
[./out]
type = Exodus
refinements = 2
[../]
[]
test/tests/postprocessors/displaced_mesh/side.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
displacements = 'ux uy'
[]
[AuxVariables]
[./ux]
[./InitialCondition]
type = FunctionIC
function = x
[../]
[../]
[./uy]
[./InitialCondition]
type = FunctionIC
function = y
[../]
[../]
[./c]
initial_condition = 1
[../]
[]
[Variables]
[./a]
[../]
[]
[Kernels]
[./a]
type = Diffusion
variable = a
[../]
[]
[Postprocessors]
[./without]
type = SideIntegralVariablePostprocessor
variable = c
execute_on = initial
boundary = left
[../]
[./with]
type = SideIntegralVariablePostprocessor
variable = c
use_displaced_mesh = true
execute_on = initial
boundary = left
[../]
[]
[Problem]
solve = false
[]
[Executioner]
type = Transient
num_steps = 0
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
test/tests/outputs/exodus/exodus_enable_initial.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
execute_on = 'initial timestep_end'
[../]
[]
[Debug]
show_var_residual_norms = true
#show_actions = true
[]
modules/richards/test/tests/uo_egs/relperm.i
# Outputs a relative permeability curve into an exodus file
# and into a CSV file.
# In the exodus file, the relperm will be a function of "x", and
# this "x" is actually effective saturation.
# In the CSV file you will find the relperm at the "x" point
# specified by you below.
#
# You may specify:
# - the "type" of relative permeability in the UserObjects block
# - the parameters of this relative permeability curve in the UserObjects block
# - the "x" point (which is effective saturation) that you want to extract
# the relative permeability at, if you want a value at a particular point
[UserObjects]
[./relperm]
type = RichardsRelPermPower
simm = 0.1
n = 3
[../]
[]
[Postprocessors]
[./point_val]
type = PointValue
execute_on = timestep_begin
point = '0.5 0 0'
variable = relperm
[../]
[]
############################
# You should not need to change any of the stuff below
############################
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[Variables]
[./u]
[../]
[]
[ICs]
[./u_init]
type = FunctionIC
variable = u
function = x
[../]
[]
[AuxVariables]
[./relperm]
[../]
[]
[AuxKernels]
[./relperm_AuxK]
type = RichardsRelPermAux
variable = relperm
relperm_UO = relperm
execute_on = timestep_begin
seff_var = u
[../]
[]
[Kernels]
[./dummy]
type = Diffusion
variable = u
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 0
[]
[Outputs]
file_base = relperm
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = u
[../]
[]
test/tests/materials/multiple_materials/multiple_materials_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 3
ny = 3
nz = 0
zmin = 0
zmax = 0
elem_type = QUAD4
[]
[Variables]
active = 'u v'
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./diff1]
order = CONSTANT
family = MONOMIAL
[../]
[./diff2]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./diff1]
type = DiffMKernel
variable = u
mat_prop = diff1
[../]
[./diff2]
type = DiffMKernel
variable = v
mat_prop = diff2
[../]
[]
[AuxKernels]
[./diff1]
type = MaterialRealAux
variable = diff1
property = diff1
[../]
[./diff2]
type = MaterialRealAux
variable = diff2
property = diff2
[../]
[]
[BCs]
# Mesh Generation produces boundaries in counter-clockwise fashion
[./left_u]
type = DirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right_u]
type = DirichletBC
variable = u
boundary = 1
value = 1
[../]
[./left_v]
type = DirichletBC
variable = v
boundary = 3
value = 1
[../]
[./right_v]
type = DirichletBC
variable = v
boundary = 1
value = 0
[../]
[]
[Materials]
[./dm1]
type = GenericConstantMaterial
block = 0
prop_names = 'diff1'
prop_values = '2'
[../]
[./dm2]
type = GenericConstantMaterial
block = 0
prop_names = 'diff2'
prop_values = '4'
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/solid_mechanics/test/tests/LSH_smallstrain/LSH_smallstrain_test.i
#This is a test of the LSHPlasticMaterial (linear strain hardening) model using the small strain formulation.
#The exact same problem was run in Abaqus with exactly the same result.
[Mesh]
file = 1x1x1cube.e
# displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./plastic_strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./top_pull]
type = ParsedFunction
value = t*(1.0/5.0)
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./plastic_strain_xx]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_xx
index = 0
[../]
[./plastic_strain_yy]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_yy
index = 1
[../]
[./plastic_strain_zz]
type = MaterialTensorAux
tensor = plastic_strain
variable = plastic_strain_zz
index = 2
[../]
[]
[BCs]
[./y_pull_function]
type = FunctionDirichletBC
variable = disp_y
boundary = 5
function = top_pull
[../]
[./x_bot]
type = DirichletBC
variable = disp_x
boundary = 4
value = 0.0
[../]
[./y_bot]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./z_bot]
type = DirichletBC
variable = disp_z
boundary = 2
value = 0.0
[../]
[]
[Materials]
[./delaware]
type = LinearStrainHardening
formulation = linear
block = 1
youngs_modulus = 2.1e5
poissons_ratio = 0.3
yield_stress = 2.4e2
hardening_constant = 1206
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-ksp_gmres_restart'
petsc_options_value = '101'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-12
nl_abs_tol = 1e-10
l_tol = 1e-9
start_time = 0.0
end_time = 0.0105
# num_steps = 100
dt = 1.5e-3
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/gravity/gravity.i
# Gravity Test
#
# This test is designed to exercise the gravity body force kernel.
#
# The mesh for this problem is a rectangular bar 10 units by 1 unit
# by 1 unit.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero on each of side that faces a negative
# coordinate direction. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(x) = -b*x^2/(2*E)+b*L*x/E
#
# The displacement at x=L is b*L^2/(2*E) = 2*20*10*10/(2*1e6) = 0.002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(x) = b*(L-x)
#
# The stress at x=0 is b*L = 2*20*10 = 400.
#
# Note: The simulation does not measure stress at x=0. The stress
# is reported at element centers. The element closest to x=0 sits
# at x = 1/4 and has a stress of 390. This matches the linear
# stress distribution that is expected. The same situation applies
# at x = L where the stress is zero analytically. The nearest
# element is at x=9.75 where the stress is 10.
#
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = gravity_test.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Modules/TensorMechanics/Master/All]
volumetric_locking_correction = true
strain = FINITE
add_variables = true
generate_output = 'stress_xx'
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_x
value = 20
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = 5
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
bulk_modulus = 0.333333333333333e6
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./density]
type = Density
block = 1
density = 2
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = gravity_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/glued_penalty_sm.i
[Mesh]
file = blocks_2d_nogap.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.01
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = glued
formulation = penalty
penalty = 1e+7
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_aug.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick2_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 100
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
tangential_tolerance = 1e-3
formulation = augmented_lagrange
system = constraint
normalize_penalty = true
penalty = 1e8
model = frictionless
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_template2_sm.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[Mesh]
file = cyl2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/adaptive_timestepping/adapt_tstep_function_change_restart1.i
# This is a test designed to evaluate the cabability of the
# IterationAdaptiveDT TimeStepper to adjust time step size according to
# a function. For example, if the power input function for a BISON
# simulation rapidly increases or decreases, the IterationAdaptiveDT
# TimeStepper should take time steps small enough to capture the
# oscillation.
[GlobalParams]
order = FIRST
family = LAGRANGE
block = 1
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = 1hex8_10mm_cube.e
[]
[Functions]
[./Fiss_Function]
type = PiecewiseLinear
x = '0 1e6 2e6 2.001e6 2.002e6'
y = '0 3e8 3e8 12e8 0'
[../]
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[./temp]
initial_condition = 300.0
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
strain = FINITE
incremental = true
volumetric_locking_correction = true
eigenstrain_names = thermal_expansion
decomposition_method = EigenSolution
add_variables = true
generate_output = 'vonmises_stress'
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[./heat_ie]
type = HeatConductionTimeDerivative
variable = temp
[../]
[./heat_source]
type = HeatSource
variable = temp
value = 1.0
function = Fiss_Function
[../]
[]
[BCs]
[./bottom_temp]
type = DirichletBC
variable = temp
boundary = 1
value = 300
[../]
[./top_bottom_disp_x]
type = DirichletBC
variable = disp_x
boundary = '1'
value = 0
[../]
[./top_bottom_disp_y]
type = DirichletBC
variable = disp_y
boundary = '1'
value = 0
[../]
[./top_bottom_disp_z]
type = DirichletBC
variable = disp_z
boundary = '1'
value = 0
[../]
[]
[Materials]
[./thermal]
type = HeatConductionMaterial
temp = temp
specific_heat = 1.0
thermal_conductivity = 1.0
[../]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 300e6
poissons_ratio = .3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./thermal_expansion]
type = ComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 5e-6
stress_free_temperature = 300.0
temperature = temp
eigenstrain_name = thermal_expansion
[../]
[./density]
type = Density
density = 10963.0
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
verbose = true
nl_abs_tol = 1e-10
start_time = 0.0
num_steps = 65
end_time = 2.002e6
[./TimeStepper]
type = IterationAdaptiveDT
timestep_limiting_function = Fiss_Function
max_function_change = 3e7
dt = 1e6
[../]
[]
[Postprocessors]
[./Temperature_of_Block]
type = ElementAverageValue
variable = temp
execute_on = 'initial timestep_end'
[../]
[./vonMises]
type = ElementAverageValue
variable = vonmises_stress
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 10
[../]
[./checkpoint]
type = Checkpoint
num_files = 1
[../]
[]
test/tests/outputs/overwrite/overwrite.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
overwrite = true # testing this
[../]
[]
test/tests/mesh/custom_partitioner/custom_linear_partitioner_test_displacement.i
[Mesh]
dim = 2
type = GeneratedMesh
nx = 3
ny = 3
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 10.0
uniform_refine = 2
displacements = 'u aux_v'
[./Partitioner]
type = LibmeshPartitioner
partitioner = linear
[../]
parallel_type = replicated
[]
[Functions]
[./aux_v_fn]
type = ParsedFunction
value = x*(y-0.5)/5
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./udiff]
type = Diffusion
variable = u
[../]
[./uie]
type = TimeDerivative
variable = u
[../]
[./vdiff]
type = Diffusion
variable = v
[../]
[./vie]
type = TimeDerivative
variable = v
[../]
[]
[BCs]
[./uleft]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./uright]
type = DirichletBC
variable = u
boundary = 2
value = 0.1
[../]
[./vleft]
type = DirichletBC
variable = v
boundary = 1
value = 1
[../]
[./vright]
type = DirichletBC
variable = v
boundary = 2
value = 0
[../]
[]
[AuxVariables]
[./aux_v]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxKernels]
[./aux_k_1]
type = FunctionAux
variable = aux_v
function = aux_v_fn
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 2
dt = .1
[./Adaptivity]
refine_fraction = 0.2
coarsen_fraction = 0.3
max_h_level = 4
[../]
[]
[Outputs]
file_base = custom_linear_partitioner_test_displacement
[./out]
type = Exodus
use_displaced = true
[../]
[]
modules/combined/test/tests/hertz_contact/hertz_contact_rz_quad8.i
# Hertz Contact: Sphere on sphere
# Spheres have the same radius, Young's modulus, and Poisson's ratio.
# Define E:
# 1/E = (1-nu1^2)/E1 + (1-nu2^2)/E2
#
# Effective radius R:
# 1/R = 1/R1 + 1/R2
#
# F is the applied compressive load.
#
# Area of contact a::
# a^3 = 3FR/4E
#
# Depth of indentation d:
# d = a^2/R
#
#
# Let R1 = R2 = 2. Then R = 1.
#
# Let nu1 = nu2 = 0.25, E1 = E2 = 1.40625e7. Then E = 7.5e6.
#
# Let F = 10000. Then a = 0.1, d = 0.01.
#
[Problem]
coord_type = RZ
[]
[Mesh]#Comment
file = hertz_contact_rz_quad8.e
displacements = 'disp_x disp_y'
[] # Mesh
[Functions]
[./pressure]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 795.77471545947674 # 10000/pi/2^2
[../]
[./disp_y]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. -0.01 -0.01'
[../]
[] # Functions
[Variables]
[./disp_x]
order = SECOND
family = LAGRANGE
[../]
[./disp_y]
order = SECOND
family = LAGRANGE
[../]
[] # Variables
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./vonmises]
order = CONSTANT
family = MONOMIAL
[../]
[./hydrostatic]
order = CONSTANT
family = MONOMIAL
[../]
[] # AuxVariables
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
tensor = stress
variable = stress_yz
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
tensor = stress
variable = stress_zx
index = 5
[../]
[./vonmises]
type = MaterialTensorAux
tensor = stress
variable = vonmises
quantity = vonmises
[../]
[./hydrostatic]
type = MaterialTensorAux
tensor = stress
variable = hydrostatic
quantity = hydrostatic
[../]
[] # AuxKernels
[BCs]
[./base_y]
type = DirichletBC
variable = disp_y
boundary = 1000
value = 0.0
[../]
[./symm_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./disp_y]
type = FunctionDirichletBC
variable = disp_y
component = 1
boundary = 2
function = disp_y
[../]
[] # BCs
[Contact]
[./dummy_name]
master = 1000
slave = 100
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
[../]
[]
[Materials]
[./stiffStuff1]
type = Elastic
block = 1
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1.40625e7
poissons_ratio = 0.25
[../]
[./stiffStuff2] # Rigid block
type = Elastic
block = 1000
disp_r = disp_x
disp_z = disp_y
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[] # Materials
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = 'none'
nl_abs_tol = 1e-7
l_max_its = 200
start_time = 0.0
dt = 0.5
end_time = 2.0
[./Quadrature]
order = THIRD
[../]
[] # Executioner
[Postprocessors]
[./maxdisp]
type = NodalVariableValue
nodeid = 103 # 104-1 where 104 is the exodus node number of the top-left node
variable = disp_y
[../]
[]
[Outputs]
elemental_as_nodal = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Output
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/frictionless_penalty_dirac.i
# This is a dirac (contact formulation) version of frictionless_penalty.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = FINITE
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e7
poissons_ratio = 0.3
[../]
[./right]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = frictionless
formulation = penalty
penalty = 1e+7
system = diracKernel
[../]
[]
test/tests/outputs/iterative/iterative_inline.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 20
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
nonlinear_residual_dt_divisor = 100
linear_residual_dt_divisor = 100
nonlinear_residual_start_time = 1.8
linear_residual_start_time = 1.8
nonlinear_residual_end_time = 1.85
linear_residual_end_time = 1.85
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_3/ring3_template1_sm.i
[Mesh]
file = ring3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/solid_mechanics/pressure/pressure_rz_test.i
#
# Pressure Test
#
# This test is taken from the Abaqus verification manual:
# "1.3.4 Axisymmetric solid elements"
#
# The two lower nodes are not allowed to translate in the z direction.
# Step 1:
# Pressure of 1000 is applied on each face.
# Step 2:
# Step 1 load plus a pressure on the vertical faces that varies from
# 0 to 1000 from top to bottom.
#
# Solution:
# Step 1:
# Stress xx, yy, zz = -1000
# Stress xy = 0
# Step 2:
# Stress xx, zz = -1500
# Stress yy = -1000
# Stress xy = 0
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Mesh]#Comment
file = pressure_rz_test.e
[] # Mesh
[Functions]
[./constant]
type = PiecewiseLinear
x = '0. 1. 2.'
y = '0. 1. 1.'
scale_factor = 1e3
[../]
[./vary]
type = ParsedFunction
value = 'if(t <= 1, 1000 , 1000+1000*(1-y))'
[../]
[] # Functions
[Modules/TensorMechanics/Master]
[./all]
add_variables = true
strain = SMALL
additional_generate_output = 'stress_xx stress_yy stress_zz stress_xy stress_yz stress_zx'
[]
[]
[BCs]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = 3
value = 0.0
[../]
[./Pressure]
[./Pressure1]
boundary = '3 4'
function = constant
[../]
[./Pressure2]
boundary = '1 2'
function = vary
[../]
[../]
[] # BCs
[Materials]
[./constant]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[./constant_stress]
type = ComputeLinearElasticStress
block = '1'
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-12
l_max_its = 20
start_time = 0.0
dt = 1.0
num_steps = 2
end_time = 2.0
[] # Executioner
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[] # Outputs
modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane2_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_3/plane3_mu_0_2_pen_sm.i
[Mesh]
file = plane3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_1/cyl1_mu_0_2_pen_sm.i
[Mesh]
file = cyl1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
order = FIRST
family = LAGRANGE
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl1_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl1_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x7 disp_y7 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/outputs/variables/show_hide.i
# Solving for 2 variables, putting one into hide list and the other one into show list
# We should only see the variable that is in show list in the output.
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
elem_type = QUAD4
[]
[Functions]
[./bc_fn]
type = ParsedFunction
value = x
[../]
[]
[Variables]
[./u]
[../]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./diff_v]
type = Diffusion
variable = v
[../]
[]
[BCs]
[./lr_u]
type = FunctionDirichletBC
variable = u
boundary = '1 3'
function = bc_fn
[../]
[./lr_v]
type = FunctionDirichletBC
variable = v
boundary = '1 3'
function = bc_fn
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
console = true
[./out]
type = Exodus
show = 'u'
hide = 'v'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template2_sm.i
[Mesh]
file = brick2_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+7
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/variables/fe_monomial_const/monomial-const-1d.i
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 100
elem_type = EDGE3
[]
[Functions]
[./bc_fn]
type=ParsedFunction
value=0
[../]
[./forcing_fn]
type = MTPiecewiseConst1D
[../]
[./solution]
type = MTPiecewiseConst1D
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
# Note: MOOSE's DirichletBCs do not work properly with shape functions that do not
# have DOFs at the element edges. This test works because the solution
# has been designed to be zero at the boundary which is satisfied by the IC
# Ticket #1352
active = ''
[./bc_all]
type=FunctionDirichletBC
variable = u
boundary = 'left right'
function = bc_fn
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1.e-9
[./Adaptivity]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/hertz_cyl/half_symm_q8/hertz_cyl_half_1deg_template1.i
[GlobalParams]
order = SECOND
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Mesh]
file = hertz_cyl_half_1deg.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Functions]
[./disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.0020 -0.0020'
[../]
[./disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.0014'
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 2
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 2
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 2
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[../]
[./disp_x639]
type = NodalVariableValue
nodeid = 638
variable = disp_x
[../]
[./disp_y639]
type = NodalVariableValue
nodeid = 638
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[../]
[./bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[../]
[./top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[../]
[./top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[../]
[]
[Materials]
[./stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[../]
[./stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff2_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[./stuff3_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '3'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff3_strain]
type = ComputeFiniteStrain
block = '3'
[../]
[./stuff3_stress]
type = ComputeFiniteStrainElasticStress
block = '3'
[../]
[./stuff4_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '4'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff4_strain]
type = ComputeFiniteStrain
block = '4'
[../]
[./stuff4_stress]
type = ComputeFiniteStrainElasticStress
block = '4'
[../]
[./stuff5_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '5'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff5_strain]
type = ComputeFiniteStrain
block = '5'
[../]
[./stuff5_stress]
type = ComputeFiniteStrainElasticStress
block = '5'
[../]
[./stuff6_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '6'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff6_strain]
type = ComputeFiniteStrain
block = '6'
[../]
[./stuff6_stress]
type = ComputeFiniteStrainElasticStress
block = '6'
[../]
[./stuff7_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stuff7_strain]
type = ComputeFiniteStrain
block = '7'
[../]
[./stuff7_stress]
type = ComputeFiniteStrainElasticStress
block = '7'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-6
nl_rel_tol = 1e-5
l_max_its = 100
nl_max_its = 200
start_time = 0.0
end_time = 3.5
l_tol = 1e-3
dt = 0.1
dtmin = 0.1
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'x_disp y_disp cont_press'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./chkfile2]
type = CSV
show = 'bot_react_x bot_react_y disp_x639 disp_y639 top_react_x top_react_y'
start_time = 0.9
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./interface]
master = 2
slave = 3
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+10
system = Constraint
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_template2_sm.i
#
# This input file is a template for both the frictionless and glued test
# variations for the current problem geometry. In order to create an input
# file to run outside the runtest framework, look at the tests file and add the
# appropriate input file lines from the cli_args line.
#
[Mesh]
file = cyl3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/materials/output/limited_via_outputs.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
xmax = 10
ymax = 10
uniform_refine = 1
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 10
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Materials]
[./test_material]
type = OutputTestMaterial
block = 0
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 5
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
output_material_properties = true
show_material_properties = 'real_property vector_property'
[../]
[]
test/tests/outputs/exodus/exodus.i
###########################################################
# This is a simple test demonstrating the ability to create
# a user-defined output type (ExodusII format).
#
# @Requirement F1.70
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
# Demonstration of using an Exodus Outputter
[./out]
type = Exodus
[../]
[]
[Debug]
show_var_residual_norms = true
#show_actions = true
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template2_sm.i
[Mesh]
file = brick3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x28]
type = NodalVariableValue
nodeid = 27
variable = disp_x
[../]
[./disp_x33]
type = NodalVariableValue
nodeid = 32
variable = disp_x
[../]
[./disp_y28]
type = NodalVariableValue
nodeid = 27
variable = disp_y
[../]
[./disp_y33]
type = NodalVariableValue
nodeid = 32
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x28 disp_y28 disp_x33 disp_y33 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
order = SECOND
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+7
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/userobjects/geometry_snap/geometrysphere.i
[Mesh]
type = GeneratedMesh
dim = 2
[]
[Variables]
[./u]
initial_condition = 1
[../]
[]
[Problem]
kernel_coverage_check = false
solve = false
[]
[Executioner]
type = Steady
[]
[UserObjects]
[./sphere]
type = GeometrySphere
boundary = 'left right top bottom'
center = '0.5 0.5 0'
radius = 0.7071
[../]
[]
[Adaptivity]
[./Markers]
[./const]
type = UniformMarker
mark = REFINE
[../]
[../]
marker = const
steps = 3
[]
[Outputs]
[./out]
type = Exodus
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_4/brick4_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick4_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x59]
type = NodalVariableValue
nodeid = 58
variable = disp_x
[../]
[./disp_x64]
type = NodalVariableValue
nodeid = 63
variable = disp_x
[../]
[./disp_y59]
type = NodalVariableValue
nodeid = 58
variable = disp_y
[../]
[./disp_y64]
type = NodalVariableValue
nodeid = 63
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x59 disp_y59 disp_x64 disp_y64 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/materials/output/block_via_outputs.i
[Mesh]
type = FileMesh
file = rectangle.e
dim = 2
uniform_refine = 1
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 10
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Materials]
[./block_1]
type = OutputTestMaterial
block = 1
variable = u
[../]
[./block_2]
type = OutputTestMaterial
block = 2
variable = u
[../]
[]
[Executioner]
type = Transient
num_steps = 5
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
output_material_properties = true
show_material_properties = real_property
[../]
[]
modules/richards/test/tests/user_objects/uo2.i
# Density User objects give the correct value
#
# If you want to add another test for another UserObject
# then add the UserObject, add a Function defining the expected result,
# add an AuxVariable and AuxKernel that will record the UserObjects value
# and finally add a NodalL2Error that compares this with the Function
[UserObjects]
[./PPNames]
type = RichardsVarNames
richards_vars = pressure
[../]
[./DensityConstBulk]
type = RichardsDensityConstBulk
dens0 = 1000
bulk_mod = 2E6
[../]
[./DensityIdeal]
type = RichardsDensityIdeal
p0 = 33333
slope = 1.1E-2
[../]
[./DensityMethane20degC]
type = RichardsDensityMethane20degC
[../]
[./DensityVDW]
type = RichardsDensityVDW
a = 0.2303
b = 4.31E-4
temperature = 293
molar_mass = 16.04246E-3
infinity_ratio = 10
[../]
[./DensityConstBulkCut]
type = RichardsDensityConstBulkCut
dens0 = 1000
bulk_mod = 2E6
cut_limit = 1E6
zero_point = -1E6
[../]
# following are unimportant in this test
[./SeffVG]
type = RichardsSeff1VG
m = 0.8
al = 1E-6
[../]
[./RelPermPower]
type = RichardsRelPermPower
simm = 0.10101
n = 2
[../]
[./Saturation]
type = RichardsSat
s_res = 0.054321
sum_s_res = 0.054321
[../]
[./SUPGstandard]
type = RichardsSUPGstandard
p_SUPG = 1E5
[../]
[]
[Functions]
[./initial_pressure]
type = ParsedFunction
value = x
[../]
[./answer_DensityConstBulk]
type = ParsedFunction
value = dens0*exp(x/bulk_mod)
vars = 'dens0 bulk_mod'
vals = '1000 2E6'
[../]
[./answer_dDensityConstBulk]
type = GradParsedFunction
direction = '1 0 0'
value = dens0*exp(x/bulk_mod)
vars = 'dens0 bulk_mod'
vals = '1000 2E6'
[../]
[./answer_d2DensityConstBulk]
type = Grad2ParsedFunction
direction = '1 0 0'
value = dens0*exp(x/bulk_mod)
vars = 'dens0 bulk_mod'
vals = '1000 2E6'
[../]
[./answer_DensityIdeal]
type = ParsedFunction
value = slope*(x-p0)
vars = 'p0 slope'
vals = '33333 1.1E-2'
[../]
[./answer_dDensityIdeal]
type = GradParsedFunction
direction = '1 0 0'
value = slope*(x-p0)
vars = 'p0 slope'
vals = '33333 1.1E-2'
[../]
[./answer_d2DensityIdeal]
type = Grad2ParsedFunction
direction = '1 0 0'
value = slope*(x-p0)
vars = 'p0 slope'
vals = '33333 1.1E-2'
[../]
[./answer_DensityMethane20degC]
type = ParsedFunction
value = if(x>0,(0.00654576947608E-3*x+1.04357716547E-13*x^2),0)+if(x<0,0.1*(e^(6.54576947608E-5*x)-1),0)
[../]
[./answer_dDensityMethane20degC]
type = GradParsedFunction
direction = '1 0 0'
value = if(x>0,(0.00654576947608E-3*x+1.04357716547E-13*x^2),0)+if(x<0,0.1*(e^(6.54576947608E-5*x)-1),0)
[../]
[./answer_d2DensityMethane20degC]
type = Grad2ParsedFunction
direction = '1 0 0'
value = if(x>0,(0.00654576947608E-3*x+1.04357716547E-13*x^2),0)+if(x<0,0.1*(e^(6.54576947608E-5*x)-1),0)
[../]
[./answer_DensityVDW]
type = ParsedFunction
value = if(x>0,-(molar_mass*(-2+(2*pow(2,0.3333333333333333)*(a-3*b*(b*x+rt)))/pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*x+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*x-rt),2)-4*pow(a-3*b*(b*x+rt),3)),0.5),0.3333333333333333)+(pow(2,0.6666666666666666)*pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*x+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*x-rt),2)-4*pow(a-3*b*(b*x+rt),3)),0.5),0.3333333333333333))/a))/(6.*b)+(molar_mass*(-2+(2*pow(2,0.3333333333333333)*(a-3*b*(b*0+rt)))/pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*0+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*0-rt),2)-4*pow(a-3*b*(b*0+rt),3)),0.5),0.3333333333333333)+(pow(2,0.6666666666666666)*pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*0+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*0-rt),2)-4*pow(a-3*b*(b*0+rt),3)),0.5),0.3333333333333333))/a))/(6.*b),infinityratio*molar_mass*(e^(slope0*x)-1))
vars = 'a b rt molar_mass infinityratio slope0'
vals = '0.2303 0.000431 2436.1403 0.01604246 10 4.10485e-05'
[../]
[./answer_dDensityVDW]
type = GradParsedFunction
direction = '1 0 0'
value = if(x>0,-(molar_mass*(-2+(2*pow(2,0.3333333333333333)*(a-3*b*(b*x+rt)))/pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*x+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*x-rt),2)-4*pow(a-3*b*(b*x+rt),3)),0.5),0.3333333333333333)+(pow(2,0.6666666666666666)*pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*x+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*x-rt),2)-4*pow(a-3*b*(b*x+rt),3)),0.5),0.3333333333333333))/a))/(6.*b),infinityratio*molar_mass*(e^(slope0*x)-1))
vars = 'a b rt molar_mass infinityratio slope0'
vals = '0.2303 0.000431 2436.1403 0.01604246 10 4.10485e-05'
[../]
[./answer_d2DensityVDW]
type = Grad2ParsedFunction
direction = '1 0 0'
value = if(x>0,-(molar_mass*(-2+(2*pow(2,0.3333333333333333)*(a-3*b*(b*x+rt)))/pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*x+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*x-rt),2)-4*pow(a-3*b*(b*x+rt),3)),0.5),0.3333333333333333)+(pow(2,0.6666666666666666)*pow(-2*pow(a,3)+9*pow(a,2)*b*(-2*b*x+rt)+pow(pow(a,3)*(a*pow(2*a+9*b*(2*b*x-rt),2)-4*pow(a-3*b*(b*x+rt),3)),0.5),0.3333333333333333))/a))/(6.*b),infinityratio*molar_mass*(e^(slope0*x)-1))
vars = 'a b rt molar_mass infinityratio slope0'
vals = '0.2303 0.000431 2436.1403 0.01604246 10 4.10485e-05'
[../]
[./answer_DensityConstBulkCut]
type = ParsedFunction
value = if(x<zero_pt,0,if(x>cut_limit,dens0*exp(x/bulk_mod),(3*cut_limit-2*x-zero_pt)*(x-zero_pt)*(x-zero_pt)*dens0*exp(x/bulk_mod)/(cut_limit-zero_pt)/(cut_limit-zero_pt)/(cut_limit-zero_pt)))
vars = 'dens0 bulk_mod zero_pt cut_limit'
vals = '1000 2E6 -1E6 1E6'
[../]
[./answer_dDensityConstBulkCut]
type = GradParsedFunction
direction = '1 0 0'
value = if(x<zero_pt,0,if(x>cut_limit,dens0*exp(x/bulk_mod),(3*cut_limit-2*x-zero_pt)*(x-zero_pt)*(x-zero_pt)*dens0*exp(x/bulk_mod)/(cut_limit-zero_pt)/(cut_limit-zero_pt)/(cut_limit-zero_pt)))
vars = 'dens0 bulk_mod zero_pt cut_limit'
vals = '1000 2E6 -1E6 1E6'
[../]
[./answer_d2DensityConstBulkCut]
type = Grad2ParsedFunction
direction = '1 0 0'
value = if(x<zero_pt,0,if(x>cut_limit,dens0*exp(x/bulk_mod),(3*cut_limit-2*x-zero_pt)*(x-zero_pt)*(x-zero_pt)*dens0*exp(x/bulk_mod)/(cut_limit-zero_pt)/(cut_limit-zero_pt)/(cut_limit-zero_pt)))
vars = 'dens0 bulk_mod zero_pt cut_limit'
vals = '1000 2E6 -1E6 1E6'
[../]
[]
[AuxVariables]
[./DensityConstBulk_Aux]
[../]
[./dDensityConstBulk_Aux]
[../]
[./d2DensityConstBulk_Aux]
[../]
[./DensityIdeal_Aux]
[../]
[./dDensityIdeal_Aux]
[../]
[./d2DensityIdeal_Aux]
[../]
[./DensityMethane20degC_Aux]
[../]
[./dDensityMethane20degC_Aux]
[../]
[./d2DensityMethane20degC_Aux]
[../]
[./DensityVDW_Aux]
[../]
[./dDensityVDW_Aux]
[../]
[./d2DensityVDW_Aux]
[../]
[./DensityConstBulkCut_Aux]
[../]
[./dDensityConstBulkCut_Aux]
[../]
[./d2DensityConstBulkCut_Aux]
[../]
[./check_Aux]
[../]
[]
[AuxKernels]
[./DensityConstBulk_AuxK]
type = RichardsDensityAux
variable = DensityConstBulk_Aux
density_UO = DensityConstBulk
pressure_var = pressure
[../]
[./dDensityConstBulk_AuxK]
type = RichardsDensityPrimeAux
variable = dDensityConstBulk_Aux
density_UO = DensityConstBulk
pressure_var = pressure
[../]
[./d2DensityConstBulk_AuxK]
type = RichardsDensityPrimePrimeAux
variable = d2DensityConstBulk_Aux
density_UO = DensityConstBulk
pressure_var = pressure
[../]
[./DensityIdeal_AuxK]
type = RichardsDensityAux
variable = DensityIdeal_Aux
density_UO = DensityIdeal
pressure_var = pressure
[../]
[./dDensityIdeal_AuxK]
type = RichardsDensityPrimeAux
variable = dDensityIdeal_Aux
density_UO = DensityIdeal
pressure_var = pressure
[../]
[./d2DensityIdeal_AuxK]
type = RichardsDensityPrimePrimeAux
variable = d2DensityIdeal_Aux
density_UO = DensityIdeal
pressure_var = pressure
[../]
[./DensityMethane20degC_AuxK]
type = RichardsDensityAux
variable = DensityMethane20degC_Aux
density_UO = DensityMethane20degC
pressure_var = pressure
[../]
[./dDensityMethane20degC_AuxK]
type = RichardsDensityPrimeAux
variable = dDensityMethane20degC_Aux
density_UO = DensityMethane20degC
pressure_var = pressure
[../]
[./d2DensityMethane20degC_AuxK]
type = RichardsDensityPrimePrimeAux
variable = d2DensityMethane20degC_Aux
density_UO = DensityMethane20degC
pressure_var = pressure
[../]
[./DensityVDW_AuxK]
type = RichardsDensityAux
variable = DensityVDW_Aux
density_UO = DensityVDW
pressure_var = pressure
[../]
[./dDensityVDW_AuxK]
type = RichardsDensityPrimeAux
variable = dDensityVDW_Aux
density_UO = DensityVDW
pressure_var = pressure
[../]
[./d2DensityVDW_AuxK]
type = RichardsDensityPrimePrimeAux
variable = d2DensityVDW_Aux
density_UO = DensityVDW
pressure_var = pressure
[../]
[./DensityConstBulkCut_AuxK]
type = RichardsDensityAux
variable = DensityConstBulkCut_Aux
density_UO = DensityConstBulkCut
pressure_var = pressure
[../]
[./dDensityConstBulkCut_AuxK]
type = RichardsDensityPrimeAux
variable = dDensityConstBulkCut_Aux
density_UO = DensityConstBulkCut
pressure_var = pressure
[../]
[./d2DensityConstBulkCut_AuxK]
type = RichardsDensityPrimePrimeAux
variable = d2DensityConstBulkCut_Aux
density_UO = DensityConstBulkCut
pressure_var = pressure
[../]
[./check_AuxK]
type = FunctionAux
variable = check_Aux
function = answer_d2DensityConstBulkCut
[../]
[]
[Postprocessors]
[./cf_DensityConstBulk]
type = NodalL2Error
function = answer_DensityConstBulk
variable = DensityConstBulk_Aux
[../]
[./cf_dDensityConstBulk]
type = NodalL2Error
function = answer_dDensityConstBulk
variable = dDensityConstBulk_Aux
[../]
[./cf_d2DensityConstBulk]
type = NodalL2Error
function = answer_d2DensityConstBulk
variable = d2DensityConstBulk_Aux
[../]
[./cf_DensityIdeal]
type = NodalL2Error
function = answer_DensityIdeal
variable = DensityIdeal_Aux
[../]
[./cf_dDensityIdeal]
type = NodalL2Error
function = answer_dDensityIdeal
variable = dDensityIdeal_Aux
[../]
[./cf_d2DensityIdeal]
type = NodalL2Error
function = answer_d2DensityIdeal
variable = d2DensityIdeal_Aux
[../]
[./cf_DensityMethane20degC]
type = NodalL2Error
function = answer_DensityMethane20degC
variable = DensityMethane20degC_Aux
[../]
[./cf_dDensityMethane20degC]
type = NodalL2Error
function = answer_dDensityMethane20degC
variable = dDensityMethane20degC_Aux
[../]
[./cf_d2DensityMethane20degC]
type = NodalL2Error
function = answer_d2DensityMethane20degC
variable = d2DensityMethane20degC_Aux
[../]
[./cf_DensityVDW]
type = NodalL2Error
function = answer_DensityVDW
variable = DensityVDW_Aux
[../]
[./cf_dDensityVDW]
type = NodalL2Error
function = answer_dDensityVDW
variable = dDensityVDW_Aux
[../]
[./cf_d2DensityVDW]
type = NodalL2Error
function = answer_d2DensityVDW
variable = d2DensityVDW_Aux
[../]
[./cf_DensityConstBulkCut]
type = NodalL2Error
function = answer_DensityConstBulkCut
variable = DensityConstBulkCut_Aux
[../]
[./cf_dDensityConstBulkCut]
type = NodalL2Error
function = answer_dDensityConstBulkCut
variable = dDensityConstBulkCut_Aux
[../]
[./cf_d2DensityConstBulkCut]
type = NodalL2Error
function = answer_d2DensityConstBulkCut
variable = d2DensityConstBulkCut_Aux
[../]
[]
#############################################################################
#
# Following is largely unimportant as we are not running an actual similation
#
#############################################################################
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -5E6
xmax = 5E6
[]
[Variables]
[./pressure]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = initial_pressure
[../]
[../]
[]
[Kernels]
active = 'richardst'
[./richardst]
type = RichardsMassChange
richardsVarNames_UO = PPNames
variable = pressure
[../]
[./richardsf]
type = RichardsFlux
richardsVarNames_UO = PPNames
variable = pressure
[../]
[]
[Materials]
[./unimportant_material]
type = RichardsMaterial
block = 0
mat_porosity = 0.1
mat_permeability = '1E-20 0 0 0 1E-20 0 0 0 1E-20'
richardsVarNames_UO = PPNames
density_UO = DensityConstBulk
relperm_UO = RelPermPower
sat_UO = Saturation
seff_UO = SeffVG
SUPG_UO = SUPGstandard
viscosity = 1E-3
gravity = '0 0 -10'
linear_shape_fcns = true
[../]
[]
[Preconditioning]
[./does_nothing]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E50 1E50 10000'
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 1
dt = 1E-100
[]
[Outputs]
execute_on = 'timestep_end'
active = 'csv'
file_base = uo2
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = pressure
[../]
[]
modules/combined/test/tests/gravity/gravity_qp_select.i
# Gravity Test
#
# This test is similar to the other gravity tests, but it also tests the
# capability in MaterialTensorAux to return the stress of a single,
# specified integration point, rather than the element average.
# To get the stress at a single integration point, set the parameter
# qp_select to the integration point number (i.e. 0-9 for a quad 8)
# in the AuxKernel
#
# The mesh for this problem is a unit square.
#
# The boundary conditions for this problem are as follows. The
# displacement is zero on each of side that faces a negative
# coordinate direction. The acceleration of gravity is 20.
#
# The material has a Young's modulus of 1e6 and a density of 2.
#
# The analytic solution for the displacement along the bar is:
#
# u(x) = -b*x^2/(2*E)+b*L*x/E
#
# The displacement at x=L is b*L^2/(2*E) = 2*20*1*1/(2*1e6) = 0.00002.
#
# The analytic solution for the stress along the bar assuming linear
# elasticity is:
#
# S(x) = b*(L-x)
#
# The stress at x=0 is b*L = 2*20*1 = 40.
#
# Note: The isoparametric coordinate for a quad8 (fourth order) element
# is: +/- 0.77459667 and 0. For a 1 unit square with the edge of
# the element in the x = 0 plane, there would be an integration point
# at x_coordinate 0.5 - 0.5*0.77459667 (0.11270167), 0.5, and
# 0.50 + 0.5*0.77459667 (0.88729834).
#
# The corresponding stresses are:
#
# S(0.11270167) = 40(1-0.11270167) = 35.491933
# S(0.5) = 40(1-0.5) = 20
# S(0.88729834) = 40(1-0.88729834) = 4.5080664
#
# These stresses are a precise match to the simulation result.
#
[GlobalParams]
displacements = 'disp_x disp_y'
order = SECOND
family = LAGRANGE
[]
[Mesh]
file = gravity_2D.e
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx_qp_0]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_1]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_2]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_3]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_4]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_5]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_6]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_7]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xx_qp_8]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Modules/TensorMechanics/Master/All]
strain = FINITE
#incremental = true
add_variables = true
generate_output = 'stress_xx'
[]
[Kernels]
[./gravity]
type = Gravity
variable = disp_x
value = 20
[../]
[]
[AuxKernels]
[./stress_xx_qp_0]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_0
index_i = 0
index_j = 0
selected_qp = 0
[../]
[./stress_xx_qp_1]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_1
index_i = 0
index_j = 0
selected_qp = 1
[../]
[./stress_xx_qp_2]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_2
index_i = 0
index_j = 0
selected_qp = 2
[../]
[./stress_xx_qp_3]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_3
index_i = 0
index_j = 0
selected_qp = 3
[../]
[./stress_xx_qp_4]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_4
index_i = 0
index_j = 0
selected_qp = 4
[../]
[./stress_xx_qp_5]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_5
index_i = 0
index_j = 0
selected_qp = 5
[../]
[./stress_xx_qp_6]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_6
index_i = 0
index_j = 0
selected_qp = 6
[../]
[./stress_xx_qp_7]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_7
index_i = 0
index_j = 0
selected_qp = 7
[../]
[./stress_xx_qp_8]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx_qp_8
index_i = 0
index_j = 0
selected_qp = 8
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_y
boundary = 5
value = 0.0
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
bulk_modulus = 0.333333333333333e6
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
[../]
[./density]
type = Density
density = 2
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
end_time = 1.0
[]
[Outputs]
file_base = gravity_qp_select_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/postprocessors/element_average_value/elem_pps_multi_block_test.i
#
# Tests elemental PPS running on multiple block
#
[Mesh]
type = StripeMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 3
ny = 3
elem_type = QUAD4
stripes = 3
# StripeMesh currently only works correctly with ReplicatedMesh.
parallel_type = replicated
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = x
[../]
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Kernels]
[./uv]
type = Reaction
variable = u
[../]
[./fv]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[Postprocessors]
[./avg_1_2]
type = ElementAverageValue
variable = u
block = '0 1'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/phase_field/test/tests/initial_conditions/HexPolycrystalIC.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 19
ny = 19
[]
[GlobalParams]
op_num = 9
var_name_base = gr
grain_num = 36
[]
[Variables]
[./PolycrystalVariables]
[../]
[]
[UserObjects]
[./hex_ic]
type = PolycrystalHex
coloring_algorithm = bt
[../]
[]
[ICs]
[./PolycrystalICs]
[./PolycrystalColoringIC]
polycrystal_ic_uo = hex_ic
[../]
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x'
[../]
[../]
[]
[Executioner]
type = Transient
num_steps = 1
[]
[Problem]
solve = false
kernel_coverage_check = false
[]
[Outputs]
[./out]
type = Exodus
execute_on = final
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_2/brick2_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick2_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x7]
type = NodalVariableValue
nodeid = 6
variable = disp_x
[../]
[./disp_x26]
type = NodalVariableValue
nodeid = 25
variable = disp_x
[../]
[./disp_y7]
type = NodalVariableValue
nodeid = 6
variable = disp_y
[../]
[./disp_y26]
type = NodalVariableValue
nodeid = 25
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x7 disp_y7 disp_x26 disp_y26 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick3_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x28]
type = NodalVariableValue
nodeid = 27
variable = disp_x
[../]
[./disp_x33]
type = NodalVariableValue
nodeid = 32
variable = disp_x
[../]
[./disp_y28]
type = NodalVariableValue
nodeid = 27
variable = disp_y
[../]
[./disp_y33]
type = NodalVariableValue
nodeid = 32
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x28 disp_y28 disp_x33 disp_y33 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+7
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_1/brick1_template2_sm.i
[Mesh]
file = brick1_mesh.e
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x8]
type = NodalVariableValue
nodeid = 7
variable = disp_x
[../]
[./disp_x13]
type = NodalVariableValue
nodeid = 12
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y8]
type = NodalVariableValue
nodeid = 7
variable = disp_y
[../]
[./disp_y13]
type = NodalVariableValue
nodeid = 12
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_x8 disp_x13 disp_x16 disp_y5 disp_y8 disp_y13 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_kinematic_dirac_sm.i
# This is a dirac (contact formulation) version of frictionless_kinematic.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.1
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
master = 2
slave = 3
model = frictionless
penalty = 1e+6
system = dirackernel
[../]
[]
modules/combined/test/tests/evolving_mass_density/rz_tensors.i
# Constant mass in RZ using Tensor Mechanics
#
# This test forces an RZ mesh to move through a series of displacements
# in order to test whether the mass is constant. The density is chosen
# such that the mass is 2.5.
# This test is a duplicate of the rz.i test for solid mechanics, and the
# output of this tensor mechanics test is compared to the original
# solid mechanics output. The duplication is necessary to test the
# migrated tensor mechanics version while maintaining tests for solid mechanics.
[Mesh]
file = elastic_patch_rz.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
coord_type = RZ
[]
[Functions]
[./x101]
type = PiecewiseLinear
x = '0 5 6'
y = '0 0 0.24'
[../]
[./y101]
type = PiecewiseLinear
x = '0 6'
y = '0 0'
[../]
[./x102]
type = PiecewiseLinear
x = '0 4 5'
y = '0 0 0.24'
[../]
[./y102]
type = PiecewiseLinear
x = '0 1 2 3'
y = '0 0 0.12 0'
[../]
[./x103]
type = PiecewiseLinear
x = '0 4 5'
y = '0 0 0.24'
[../]
[./y103]
type = PiecewiseLinear
x = '0 1 3 4'
y = '0 0.12 0.12 0'
[../]
[./x104]
type = PiecewiseLinear
x = '0 5 6'
y = '0 0 0.24'
[../]
[./y104]
type = PiecewiseLinear
x = '0 2 3 4'
y = '0 0 0.12 0'
[../]
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
[../]
[]
[BCs]
[./101x]
type = FunctionDirichletBC
variable = disp_x
boundary = 101
function = x101
[../]
[./101y]
type = FunctionDirichletBC
variable = disp_y
boundary = 101
function = y101
[../]
[./102x]
type = FunctionDirichletBC
variable = disp_x
boundary = 102
function = x102
[../]
[./102y]
type = FunctionDirichletBC
variable = disp_y
boundary = 102
function = y102
[../]
[./103x]
type = FunctionDirichletBC
variable = disp_x
boundary = 103
function = x103
[../]
[./103y]
type = FunctionDirichletBC
variable = disp_y
boundary = 103
function = y103
[../]
[./104x]
type = FunctionDirichletBC
variable = disp_x
boundary = 104
function = x104
[../]
[./104y]
type = FunctionDirichletBC
variable = disp_y
boundary = 104
function = y104
[../]
[]
[Materials]
[./elasticity_tensor]
type = ComputeIsotropicElasticityTensor
block = PATCH
youngs_modulus = 1e6
poissons_ratio = 0.0
[../]
[./small_strain_rz]
type = ComputeAxisymmetricRZSmallStrain
block = PATCH
[../]
[./elastic_stress]
type = ComputeLinearElasticStress
block = PATCH
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
# Two sets of linesearch options are for petsc 3.1 and 3.3 respectively
petsc_options_iname = '-pc_type -ksp_gmres_restart'
petsc_options_value = 'lu 101'
line_search = 'none'
nl_abs_tol = 1e-10
l_max_its = 20
start_time = 0.0
dt = 1
num_steps = 6
end_time = 6.0
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
file_base = rz_out
[../]
[]
[Postprocessors]
[./mass]
type = Mass
variable = disp_x
execute_on = 'initial timestep_end'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_4/plane4_mu_0_2_pen_sm.i
[Mesh]
file = plane4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_y = saved_y
save_in_disp_x = saved_x
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = LinearIsotropicMaterial
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = LinearIsotropicMaterial
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = plane4_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = plane4_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/outputs/error/all_reserved.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[./all]
type = Exodus
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictionless_aug_sm.i
# This is a benchmark test that checks constraint based frictionless
# contact using the augmented lagrangian method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./saved_x]
[../]
[./saved_y]
[../]
[./contact_traction]
[../]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
save_in_disp_x = saved_x
save_in_disp_y = saved_y
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
dt = 0.1
end_time = 15
num_steps = 200
l_tol = 1e-6
nl_rel_tol = 1e-7
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Problem]
type = AugmentedLagrangianContactProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
maximum_lagrangian_update_iterations = 25
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
normalize_penalty = true
formulation = augmented_lagrange
tangential_tolerance = 1e-3
system = constraint
normal_smoothing_distance = 0.1
al_penetration_tolerance = 1e-9
[../]
[]
test/tests/variables/fe_monomial_const/monomial-const-2d.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 100
ny = 100
elem_type = QUAD4
[]
[Functions]
[./bc_fn]
type=ParsedFunction
value=0
[../]
[./bc_fnt]
type = ParsedFunction
value = 0
[../]
[./bc_fnb]
type = ParsedFunction
value = 0
[../]
[./bc_fnl]
type = ParsedFunction
value = 0
[../]
[./bc_fnr]
type = ParsedFunction
value = 0
[../]
[./forcing_fn]
# type = ParsedFunction
# value = 0
type = MTPiecewiseConst2D
[../]
[./solution]
type = MTPiecewiseConst2D
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
# Note: MOOSE's DirichletBCs do not work properly with shape functions that do not
# have DOFs at the element edges. This test works because the solution
# has been designed to be zero at the boundary which is satisfied by the IC
# Ticket #1352
active = ''
[./bc_all]
type=FunctionDirichletBC
variable = u
boundary = 'top bottom left right'
function = bc_fn
[../]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1.e-10
[./Adaptivity]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_3/cyl3_mu_0_2_pen.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl3_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x2]
type = NodalVariableValue
nodeid = 1
variable = disp_x
[../]
[./disp_x11]
type = NodalVariableValue
nodeid = 10
variable = disp_x
[../]
[./disp_y2]
type = NodalVariableValue
nodeid = 1
variable = disp_y
[../]
[./disp_y11]
type = NodalVariableValue
nodeid = 10
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl3_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl3_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x2 disp_y2 disp_x11 disp_y11 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_4/cyl4_template2.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl4_mesh.e
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./stress_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./stress_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 100
nl_max_its = 1000
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 stress_yy stress_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
modules/richards/test/tests/uo_egs/density.i
# Outputs a density relationship into an exodus file
# and into a CSV file.
# In the exodus file, the density will be a function of "x", and
# this "x" is actually porepressure
# In the CSV file you will find the density at the "x" point
# specified by you below.
#
# You may specify:
# - the "type" of density in the UserObjects block
# - the parameters of this density function in the UserObjects block
# - the "x" point (which is porepressure) that you want to extract
# the density at, if you want a value at a particular point
# - the range of "x" values (which is porepressure values) may be
# changed in the Mesh block, below
[UserObjects]
[./density]
type = RichardsDensityVDW
a = 0.2303
b = 4.31E-5
molar_mass = 16.04246E-3
temperature = 293
[../]
[]
[Postprocessors]
[./point_val]
type = PointValue
execute_on = timestep_begin
# note this point must lie inside the mesh below
point = '1 0 0'
variable = density
[../]
[]
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
# the following specify the range of porepressure
xmin = -1E6
xmax = 1E7
[]
############################
# You should not need to change any of the stuff below
############################
[Variables]
[./u]
[../]
[]
[ICs]
[./u_init]
type = FunctionIC
variable = u
function = x
[../]
[]
[AuxVariables]
[./density]
[../]
[]
[AuxKernels]
[./density_AuxK]
type = RichardsDensityAux
variable = density
density_UO = density
execute_on = timestep_begin
pressure_var = u
[../]
[]
[Kernels]
[./dummy]
type = Diffusion
variable = u
[../]
[]
[Executioner]
type = Transient
solve_type = Newton
num_steps = 0
[]
[Outputs]
file_base = density
[./csv]
type = CSV
[../]
[./exodus]
type = Exodus
hide = u
[../]
[]
modules/tensor_mechanics/test/tests/gravity/gravity_test.i
#
# Gravity Test
#
# This test is designed to apply a gravity body force.
#
# The mesh is composed of one block with a single element.
# The bottom is fixed in all three directions. Poisson's ratio
# is zero and the density is 20/9.81
# which makes it trivial to check displacements.
#
[Mesh]
type = GeneratedMesh
dim = 3
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[Kernels]
[./TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[../]
[./gravity_y]
type = Gravity
variable = disp_y
value = -9.81
[../]
[]
[BCs]
[./no_x]
type = DirichletBC
variable = disp_x
boundary = bottom
value = 0.0
[../]
[./no_y]
type = DirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[./no_z]
type = DirichletBC
variable = disp_z
boundary = bottom
value = 0.0
[../]
[]
[Materials]
[./Elasticity_tensor]
type = ComputeElasticityTensor
fill_method = symmetric_isotropic
C_ijkl = '0 0.5e6'
[../]
[./strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[./density]
type = GenericConstantMaterial
prop_names = density
prop_values = 2.0387
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
nl_abs_tol = 1e-10
l_max_its = 20
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/outputs/position/position.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
[./out]
type = Exodus
position = '1 1 0'
[../]
[]
modules/combined/test/tests/mechanical_contact_constraint/blocks_2d/sm/frictionless_penalty_sm.i
[Mesh]
file = blocks_2d.e
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
#Initial gap is 0.01
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e7
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.01
end_time = 0.10
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-8
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
system = Constraint
master = 2
slave = 3
model = frictionless
formulation = penalty
penalty = 1e+7
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/cyl_2/cyl2_mu_0_2_pen.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = cyl2_mesh.e
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeAxisymmetricRZIncrementalStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-6
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-4
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
file_base = cyl2_mu_0_2_pen_out
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
file_base = cyl2_mu_0_2_pen_check
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
model = coulomb
formulation = penalty
normalize_penalty = true
tangential_tolerance = 1e-3
friction_coefficient = 0.2
penalty = 1e+9
[../]
[]
test/tests/materials/material/material_check_test.i
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 4
ny = 4
[]
[./block_1]
input = gen
type = SubdomainBoundingBoxGenerator
top_right = '0.5 0.5 0'
bottom_left = '0 0 0'
block_id = 1
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./mat]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
[./mat]
type = MaterialRealAux
variable = mat
property = prop
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 3
value = 1
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 3
[../]
[]
[Materials]
[./mat]
type = GenericConstantMaterial
block = 1
prop_names = prop
prop_values = 1
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/mesh/subdomain_partitioner/subdomain_partitioner.i
[Mesh]
file = test_subdomain_partitioner.e
[./Partitioner]
type = LibmeshPartitioner
partitioner = subdomain_partitioner
blocks = '1 2 3 4; 1001 1002 1003 1004'
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./proc_id]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[AuxKernels]
[./proc_id]
type = ProcessorIDAux
variable = proc_id
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = subdomain_partitioner_out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/solid_mechanics/examples/bridge/bridge_large_strain.i
#
# Bridge linear elasticity example
#
# This example models a bridge using linear elasticity.
# It can be either steel or concrete.
# Gravity is applied
# A pressure of 0.5 MPa is also applied
#
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[Mesh]
displacements = 'disp_x disp_y disp_z' #Define displacements for deformed mesh
type = FileMesh #Read in mesh from file
file = ../../../tensor_mechanics/examples/bridge/bridge.e
boundary_id = '1 2 3 4 5 6' #Assign names to boundaries to make things clearer
boundary_name = 'top left right bottom1 bottom2 bottom3'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[SolidMechanics]
[./solid]
[../]
[]
[Kernels]
[./gravity_y]
#Gravity is applied to bridge
type = Gravity
variable = disp_y
value = -9.81
[../]
[]
[AuxVariables]
[./von_mises]
#Dependent variable used to visualize the Von Mises stress
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = MaterialTensorAux
variable = von_mises
tensor = stress
execute_on = timestep_end
quantity = VonMises
[../]
[]
[BCs]
[./Pressure]
[./load]
#Applies the pressure
boundary = top
factor = 5e5 # Pa
[../]
[../]
[./anchor_x]
#Anchors the bottom and sides against deformation in the x-direction
type = DirichletBC
variable = disp_x
boundary = 'left right bottom1 bottom2 bottom3'
value = 0.0
[../]
[./anchor_y]
#Anchors the bottom and sides against deformation in the y-direction
type = DirichletBC
variable = disp_y
boundary = 'left right bottom1 bottom2 bottom3'
value = 0.0
[../]
[./anchor_z]
#Anchors the bottom and sides against deformation in the z-direction
type = DirichletBC
variable = disp_z
boundary = 'left right bottom1 bottom2 bottom3'
value = 0.0
[../]
[]
[Materials]
[./steel_elastic]
type = Elastic
block = 1
youngs_modulus = 210e9 #Pa
poissons_ratio = 0.3
formulation = Nonlinear3D
[../]
[./density_steel]
#Defines the density of steel
type = GenericConstantMaterial
block = 1
prop_names = density
prop_values = 7850 # kg/m^3
[../]
[]
[Preconditioning]
[./SMP]
#Creates the entire Jacobian, for the Newton solve
type = SMP
full = true
[../]
[]
[Executioner]
#We solve a steady state problem using Newton's iteration
type = Transient
solve_type = NEWTON
nl_rel_tol = 1e-9
l_max_its = 30
l_tol = 1e-4
nl_max_its = 10
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
dt = 0.1
num_steps = 1
[]
[Outputs]
[./exodus]
#Outputs the result to an exodus file and converts the element stress output to a nodal output
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/solid_mechanics/test/tests/cracking/cracking_plane_stress.i
################################################################################
#
# 1x1x1 cube, single element
# simulate plane stress
# pull in +y direction on right surface to produce shear strain
#
#
#
# ____________
# /| /|
# / | 5 / | -X Left 1
# /__________ / | +X Right 4
# | | 3 | | +Y Top 5
# | 1 | | 4 | -Y Bottom 2
# | |_6_____|___| y +Z Front 6
# | / | / ^ -Z Back 3
# | / 2 | / |
# |/__________|/ |
# ----> x
# /
# /
# z
#
#
#
#################################################################################
[Mesh]
file = cube.e
displacements = 'disp_x disp_y disp_z'
# This test uses ElementalVariableValue postprocessors on specific
# elements, so element numbering needs to stay unchanged
allow_renumbering = false
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_yz]
order = CONSTANT
family = MONOMIAL
[../]
[./strain_zx]
order = CONSTANT
family = MONOMIAL
[../]
[./crack_xx_flags]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Functions]
[./displ]
type = PiecewiseLinear
x = '0 0.1 0.2 0.3 0.4'
y = '0 0.0026 0 -0.0026 0'
[../]
[./pressure]
type = PiecewiseLinear
x = '0 0.1 0.2 0.3 0.4'
y = '0 0 0 0 0'
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[AuxKernels]
[./crack_xx_flags]
type = MaterialRealVectorValueAux
property = crack_flags
variable = crack_xx_flags
component = 0
block = 1
[../]
[./stress_xx]
type = MaterialTensorAux
variable = stress_xx
tensor = stress
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
variable = stress_yy
tensor = stress
index = 1
[../]
[./stress_zz]
type = MaterialTensorAux
variable = stress_zz
tensor = stress
index = 2
[../]
[./stress_xy]
type = MaterialTensorAux
variable = stress_xy
tensor = stress
index = 3
[../]
[./stress_yz]
type = MaterialTensorAux
variable = stress_yz
tensor = stress
index = 4
[../]
[./stress_zx]
type = MaterialTensorAux
variable = stress_zx
tensor = stress
index = 5
[../]
[./strain_xx]
type = MaterialTensorAux
variable = strain_xx
tensor = total_strain
index = 0
[../]
[./strain_yy]
type = MaterialTensorAux
variable = strain_yy
tensor = total_strain
index = 1
[../]
[./strain_zz]
type = MaterialTensorAux
variable = strain_zz
tensor = total_strain
index = 2
[../]
[./strain_xy]
type = MaterialTensorAux
variable = strain_xy
tensor = total_strain
index = 3
[../]
[./strain_yz]
type = MaterialTensorAux
variable = strain_yz
tensor = total_strain
index = 4
[../]
[./strain_zx]
type = MaterialTensorAux
variable = strain_zx
tensor = total_strain
index = 5
[../]
[]
[BCs]
[./pull_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = displ
[../]
[./pin_x]
type = DirichletBC
variable = disp_x
boundary = '1 4'
value = 0.0
[../]
[./pin_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./back]
type = DirichletBC
variable = disp_z
boundary = '3'
value = 0.0
[../]
[./front]
type = Pressure
variable = disp_z
component = 2
boundary = 6
function = pressure
factor = 1.0
[../]
[]
[Materials]
[./fred]
type = Elastic
block = 1
youngs_modulus = 200.0e3
poissons_ratio = 0.3
cracking_stress = 120
cracking_release = exponential
cracking_residual_stress = 0.1
cracking_beta = 0.1
compute_method = ShearRetention
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[../]
[]
[Postprocessors]
[./elem_stress_xx]
type = ElementalVariableValue
variable = stress_xx
elementid = 0
[../]
[./elem_strain_xx]
type = ElementalVariableValue
variable = strain_xx
elementid = 0
[../]
[./elem_stress_yy]
type = ElementalVariableValue
variable = stress_yy
elementid = 0
[../]
[./elem_strain_yy]
type = ElementalVariableValue
variable = strain_yy
elementid = 0
[../]
[./elem_stress_zz]
type = ElementalVariableValue
variable = stress_zz
elementid = 0
[../]
[./elem_strain_zz]
type = ElementalVariableValue
variable = strain_zz
elementid = 0
[../]
[./elem_stress_xy]
type = ElementalVariableValue
variable = stress_xy
elementid = 0
[../]
[./elem_strain_xy]
type = ElementalVariableValue
variable = strain_xy
elementid = 0
[../]
[./elem_stress_yz]
type = ElementalVariableValue
variable = stress_yz
elementid = 0
[../]
[./elem_strain_yz]
type = ElementalVariableValue
variable = strain_yz
elementid = 0
[../]
[./elem_stress_zx]
type = ElementalVariableValue
variable = stress_yz
elementid = 0
[../]
[./elem_strain_zx]
type = ElementalVariableValue
variable = strain_yz
elementid = 0
[../]
[./elem_crack_flags]
type = ElementalVariableValue
variable = crack_xx_flags
elementid = 0
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-ksp_gmres_restart -pc_type -sub_pc_type'
petsc_options_value = '101 asm lu'
line_search = 'none'
l_max_its = 100
nl_max_its = 100
nl_rel_tol = 1e-8
nl_abs_tol = 1e-8
l_tol = 1e-5
start_time = 0.0
end_time = 0.4
dt = 0.04
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
output_linear = true
[../]
csv = true
[]
test/tests/auxkernels/element_aux_var/element_aux_var_test.i
[Mesh]
file = square.e
[]
[Variables]
[u]
order = FIRST
family = LAGRANGE
[]
[]
[AuxVariables]
[one]
order = CONSTANT
family = MONOMIAL
[]
[five]
order = FIRST
family = LAGRANGE
[]
[three]
order = CONSTANT
family = MONOMIAL
[]
[coupled_nine]
order = CONSTANT
family = MONOMIAL
[]
[coupled_fifteen]
order = CONSTANT
family = MONOMIAL
[]
[coupled]
order = CONSTANT
family = MONOMIAL
[]
[coupled_nl]
order = CONSTANT
family = MONOMIAL
[]
[coupled_grad_nl]
order = CONSTANT
family = MONOMIAL
[]
[]
[Kernels]
# Coupling of nonlinear to Aux
[diff]
type = Diffusion
variable = u
[]
[force]
type = CoupledForce
variable = u
v = one
[]
[]
[AuxKernels]
# Simple Aux Kernel
# Shows coupling of Element to Nodal
# Shows coupling of Element to non-linear
# Shows coupling of Element to non-linear grad
[constant]
variable = one
type = ConstantAux
value = 1
[]
[coupled_nine]
variable = coupled_nine
type = CoupledAux
value = 3
operator = *
coupled = three
[]
[coupled_three]
variable = three
type = CoupledAux
value = 2
operator = +
coupled = one
[]
[coupled_fifteen]
variable = coupled_fifteen
type = CoupledAux
value = 5
operator = *
coupled = three
[]
[coupled]
variable = coupled
type = CoupledAux
value = 2
coupled = five
[]
[coupled_nl]
variable = coupled_nl
type = CoupledAux
value = 2
coupled = u
[]
[coupled_grad_nl]
variable = coupled_grad_nl
type = CoupledGradAux
grad = '2 0 0'
coupled = u
[]
[five]
type = ConstantAux
variable = five
boundary = '1 2'
value = 5
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[]
[right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out
[exodus]
type = Exodus
elemental_as_nodal = true
[]
[]
modules/solid_mechanics/examples/bridge/bridge.i
#
# Bridge linear elasticity example
#
# This example models a bridge using linear elasticity.
# It can be either steel or concrete.
# Gravity is applied
# A pressure of 0.5 MPa is also applied
#
[GlobalParams]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[Mesh]
displacements = 'disp_x disp_y disp_z' #Define displacements for deformed mesh
type = FileMesh #Read in mesh from file
file = ../../../tensor_mechanics/examples/bridge/bridge.e
boundary_id = '1 2 3 4 5 6' #Assign names to boundaries to make things clearer
boundary_name = 'top left right bottom1 bottom2 bottom3'
[]
[Variables]
[./disp_x]
order = FIRST
family = LAGRANGE
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
[../]
[./disp_z]
order = FIRST
family = LAGRANGE
[../]
[]
[SolidMechanics]
[./solid]
[../]
[]
[Kernels]
[./gravity_y]
#Gravity is applied to bridge
type = Gravity
variable = disp_y
value = -9.81
[../]
[]
[AuxVariables]
[./von_mises]
#Dependent variable used to visualize the Von Mises stress
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = MaterialTensorAux
variable = von_mises
tensor = stress
execute_on = timestep_end
quantity = VonMises
[../]
[]
[BCs]
[./Pressure]
[./load]
#Applies the pressure
boundary = top
factor = 5e5 # Pa
[../]
[../]
[./anchor_x]
#Anchors the bottom and sides against deformation in the x-direction
type = DirichletBC
variable = disp_x
boundary = 'left right bottom1 bottom2 bottom3'
value = 0.0
[../]
[./anchor_y]
#Anchors the bottom and sides against deformation in the y-direction
type = DirichletBC
variable = disp_y
boundary = 'left right bottom1 bottom2 bottom3'
value = 0.0
[../]
[./anchor_z]
#Anchors the bottom and sides against deformation in the z-direction
type = DirichletBC
variable = disp_z
boundary = 'left right bottom1 bottom2 bottom3'
value = 0.0
[../]
[]
[Materials]
[./steel_elastic]
type = Elastic
block = 1
youngs_modulus = 210e9 #Pa
poissons_ratio = 0.3
formulation = Linear
[../]
[./density_steel]
#Defines the density of steel
type = GenericConstantMaterial
block = 1
prop_names = density
prop_values = 7850 # kg/m^3
[../]
[]
[Preconditioning]
[./SMP]
#Creates the entire Jacobian, for the Newton solve
type = SMP
full = true
[../]
[]
[Executioner]
#We solve a steady state problem using Newton's iteration
type = Steady
solve_type = NEWTON
nl_rel_tol = 1e-9
l_max_its = 30
l_tol = 1e-4
nl_max_its = 10
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 31'
[]
[Outputs]
[./exodus]
#Outputs the result to an exodus file and converts the element stress output to a nodal output
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template1_sm.i
[Mesh]
file = ring4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-9
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/glued_contact_constraint/glued_contact_constraint.i
[Mesh]
type = FileMesh
file = simplest_contact.e
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[AuxVariables]
[./penetration]
[../]
[]
[Modules/TensorMechanics/Master]
[./all]
planar_formulation = PLANE_STRAIN
strain = SMALL
add_variables = true
[../]
[]
[AuxKernels]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 2
paired_boundary = 3
[../]
[]
[Constraints]
[./contact_x]
type = GluedContactConstraint
variable = disp_x
master_variable = disp_x
component = 0
slave = 2
master = 3
penalty = 1e6
nodal_area = penetration
boundary = 2
[../]
[./contact_y]
type = GluedContactConstraint
variable = disp_y
master_variable = disp_y
component = 1
slave = 2
master = 3
penalty = 1e6
nodal_area = penetration
boundary = 3
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.0001
[../]
[./right_y]
type = DirichletBC
variable = disp_y
boundary = 4
value = 0.0
[../]
[]
[Materials]
[./elasticity]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./stress]
type = ComputeLinearElasticStress
[../]
[]
[Executioner]
type = Transient
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
petsc_options_value = 'hypre boomeramg 101'
line_search = none
nl_abs_tol = 1e-8
l_max_its = 100
nl_max_its = 10
dt = 1.0
num_steps = 1
[]
[Outputs]
file_base = out
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/combined/test/tests/sliding_block/sliding/constraint/sm/frictionless_penalty_sm.i
# This is a benchmark test that checks constraint based frictionless
# contact using the penalty method. In this test a constant
# displacement is applied in the horizontal direction to simulate
# a small block come sliding down a larger block.
#
# The gold file is run on one processor
# and the benchmark case is run on a minimum of 4 processors to ensure no
# parallel variability in the contact pressure and penetration results.
#
[Mesh]
file = sliding_elastic_blocks_2d.e
patch_size = 80
[]
[GlobalParams]
volumetric_locking_correction = false
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./penetration]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Functions]
[./vertical_movement]
type = ParsedFunction
value = -t
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
[../]
[]
[AuxKernels]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 3
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 2
[../]
[]
[Postprocessors]
[./nonlinear_its]
type = NumNonlinearIterations
execute_on = timestep_end
[../]
[./penetration]
type = NodalVariableValue
variable = penetration
nodeid = 222
[../]
[./contact_pressure]
type = NodalVariableValue
variable = contact_pressure
nodeid = 222
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = 1
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = 4
value = -0.02
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = vertical_movement
[../]
[]
[Materials]
[./left]
type = Elastic
formulation = NonlinearPlaneStrain
block = 1
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./right]
type = Elastic
formulation = NonlinearPlaneStrain
block = 2
disp_y = disp_y
disp_x = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
l_max_its = 100
nl_max_its = 1000
dt = 0.1
end_time = 15
num_steps = 1000
l_tol = 1e-6
nl_rel_tol = 1e-10
nl_abs_tol = 1e-6
dtmin = 0.01
[./Predictor]
type = SimplePredictor
scale = 1.0
[../]
[]
[Outputs]
interval = 10
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 2
model = frictionless
penalty = 1e+7
formulation = penalty
system = constraint
normal_smoothing_distance = 0.1
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/plane_2/plane2_template1.i
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
file = plane2_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./zeroslip_x]
type = ConstantAux
variable = inc_slip_x
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./zeroslip_y]
type = ConstantAux
variable = inc_slip_y
boundary = 4
execute_on = timestep_begin
value = 0.0
[../]
[./accum_slip_x]
type = AccumulateAux
variable = accum_slip_x
accumulate_from_variable = inc_slip_x
execute_on = timestep_end
[../]
[./accum_slip_y]
type = AccumulateAux
variable = accum_slip_y
accumulate_from_variable = inc_slip_y
execute_on = timestep_end
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x5]
type = NodalVariableValue
nodeid = 4
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y5]
type = NodalVariableValue
nodeid = 4
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeIncrementalSmallStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeIncrementalSmallStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-7
l_max_its = 100
nl_max_its = 200
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-3
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x5 disp_y5 disp_x9 disp_y9 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/outputs/intervals/output_final.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./diff]
type = CoefDiffusion
variable = u
coef = 0.1
[../]
[./time]
type = TimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 6
dt = 0.1
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
interval = 5
execute_on = 'final timestep_end'
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template1.i
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Mesh]
file = brick3_mesh.e
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[Kernels]
[./TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y saved_z'
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[../]
[./stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[../]
[./stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[../]
[./stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x28]
type = NodalVariableValue
nodeid = 27
variable = disp_x
[../]
[./disp_x33]
type = NodalVariableValue
nodeid = 32
variable = disp_x
[../]
[./disp_y28]
type = NodalVariableValue
nodeid = 27
variable = disp_y
[../]
[./disp_y33]
type = NodalVariableValue
nodeid = 32
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./bot_strain]
type = ComputeFiniteStrain
block = '1'
[../]
[./bot_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[../]
[./top_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[../]
[./top_strain]
type = ComputeFiniteStrain
block = '2'
[../]
[./top_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x28 disp_y28 disp_x33 disp_y33 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/brick_3/brick3_template1_sm.i
[Mesh]
file = brick3_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y disp_z'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[./disp_z]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./saved_z]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./diag_saved_z]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./inc_slip_z]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./accum_slip_z]
[../]
[]
[SolidMechanics]
[./solid]
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
save_in_disp_x = saved_x
save_in_disp_y = saved_y
save_in_disp_z = saved_z
diag_save_in_disp_x = diag_saved_x
diag_save_in_disp_y = diag_saved_y
diag_save_in_disp_z = diag_saved_z
extra_vector_tags = 'ref'
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./stress_zz]
type = MaterialTensorAux
tensor = stress
variable = stress_zz
index = 2
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_begin
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 4
paired_boundary = 3
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 4
paired_boundary = 3
[../]
[]
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x28]
type = NodalVariableValue
nodeid = 27
variable = disp_x
[../]
[./disp_x33]
type = NodalVariableValue
nodeid = 32
variable = disp_x
[../]
[./disp_y28]
type = NodalVariableValue
nodeid = 27
variable = disp_y
[../]
[./disp_y33]
type = NodalVariableValue
nodeid = 32
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./side_x]
type = DirichletBC
variable = disp_x
boundary = 2
value = 0.0
[../]
[./back_z]
type = DirichletBC
variable = disp_z
boundary = 6
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-9
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = id
[../]
[./y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '1 3 4 5'
sort_by = id
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = id
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x28 disp_y28 disp_x33 disp_y33 stress_yy stress_zz top_react_x top_react_y x_disp y_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
order = SECOND
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
[../]
[]
test/tests/outputs/displaced/displaced_adapt_test.i
# Adaptivity on displaced problem
# - testing initial_refinement and adaptivity as well
#
# variables:
# - u and v_aux are used for displacing the problem
# - v is used to get some refinements
#
[Mesh]
dim = 2
file = square.e
uniform_refine = 3
displacements = 'u aux_v'
[]
[Functions]
[./aux_v_fn]
type = ParsedFunction
value = x*(y-0.5)/5
[../]
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[./v]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
active = 'udiff uie vdiff vconv vie'
[./udiff]
type = Diffusion
variable = u
[../]
[./uie]
type = TimeDerivative
variable = u
[../]
[./vdiff]
type = Diffusion
variable = v
[../]
[./vconv]
type = Convection
variable = v
velocity = '-10 1 0'
[../]
[./vie]
type = TimeDerivative
variable = v
[../]
[]
[BCs]
active = 'uleft uright vleft vright'
[./uleft]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./uright]
type = DirichletBC
variable = u
boundary = 2
value = 0.1
[../]
[./vleft]
type = DirichletBC
variable = v
boundary = 1
value = 1
[../]
[./vright]
type = DirichletBC
variable = v
boundary = 2
value = 0
[../]
[]
[AuxVariables]
[./aux_v]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxKernels]
[./aux_k_1]
type = FunctionAux
variable = aux_v
function = aux_v_fn
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
start_time = 0.0
num_steps = 2
dt = .1
[./Adaptivity]
refine_fraction = 0.2
coarsen_fraction = 0.3
max_h_level = 4
[../]
[]
[Outputs]
[./out]
type = Exodus
use_displaced = true
[../]
[]
modules/combined/test/tests/contact_verification/patch_tests/ring_4/ring4_template2_sm.i
[Mesh]
file = ring4_mesh.e
[]
[GlobalParams]
order = SECOND
displacements = 'disp_x disp_y'
[]
[Problem]
type = AugmentedLagrangianContactProblem
maximum_lagrangian_update_iterations = 200
coord_type = RZ
[]
[Variables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[AuxVariables]
[./stress_xx]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_yy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_xy]
order = CONSTANT
family = MONOMIAL
[../]
[./stress_zz]
order = CONSTANT
family = MONOMIAL
[../]
[./penetration]
[../]
[./saved_x]
[../]
[./saved_y]
[../]
[./diag_saved_x]
[../]
[./diag_saved_y]
[../]
[./inc_slip_x]
[../]
[./inc_slip_y]
[../]
[./accum_slip_x]
[../]
[./accum_slip_y]
[../]
[./tang_force_x]
[../]
[./tang_force_y]
[../]
[]
[SolidMechanics]
[./solid]
disp_r = disp_x
disp_z = disp_y
save_in_disp_z = saved_y
save_in_disp_r = saved_x
diag_save_in_disp_z = diag_saved_y
diag_save_in_disp_r = diag_saved_x
[../]
[]
[AuxKernels]
[./stress_xx]
type = MaterialTensorAux
tensor = stress
variable = stress_xx
index = 0
[../]
[./stress_yy]
type = MaterialTensorAux
tensor = stress
variable = stress_yy
index = 1
[../]
[./stress_xy]
type = MaterialTensorAux
tensor = stress
variable = stress_xy
index = 3
[../]
[./inc_slip_x]
type = PenetrationAux
variable = inc_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./inc_slip_y]
type = PenetrationAux
variable = inc_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_x]
type = PenetrationAux
variable = accum_slip_x
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./accum_slip_y]
type = PenetrationAux
variable = accum_slip_y
execute_on = timestep_end
boundary = 3
paired_boundary = 4
[../]
[./penetration]
type = PenetrationAux
variable = penetration
boundary = 3
paired_boundary = 4
[../]
[./tang_force_x]
type = PenetrationAux
variable = tang_force_x
quantity = tangential_force_x
boundary = 3
paired_boundary = 4
[../]
[./tang_force_y]
type = PenetrationAux
variable = tang_force_y
quantity = tangential_force_y
boundary = 3
paired_boundary = 4
[../]
[] # AuxKernels
[Postprocessors]
[./bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[../]
[./bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[../]
[./top_react_x]
type = NodalSum
variable = saved_x
boundary = 5
[../]
[./top_react_y]
type = NodalSum
variable = saved_y
boundary = 5
[../]
[./ref_resid_x]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_x
[../]
[./ref_resid_y]
type = NodalL2Norm
execute_on = timestep_end
variable = saved_y
[../]
[./sigma_yy]
type = ElementAverageValue
variable = stress_yy
[../]
[./sigma_zz]
type = ElementAverageValue
variable = stress_zz
[../]
[./disp_x16]
type = NodalVariableValue
nodeid = 15
variable = disp_x
[../]
[./disp_x9]
type = NodalVariableValue
nodeid = 8
variable = disp_x
[../]
[./disp_y16]
type = NodalVariableValue
nodeid = 15
variable = disp_y
[../]
[./disp_y9]
type = NodalVariableValue
nodeid = 8
variable = disp_y
[../]
[./_dt]
type = TimestepSize
[../]
[./num_lin_it]
type = NumLinearIterations
[../]
[./num_nonlin_it]
type = NumNonlinearIterations
[../]
[]
[BCs]
[./bot_y]
type = DirichletBC
variable = disp_y
boundary = 1
value = 0.0
[../]
[./top_press]
type = Pressure
variable = disp_y
boundary = 5
component = 1
factor = 109.89
[../]
[]
[Materials]
[./bot]
type = Elastic
block = 1
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[./top]
type = Elastic
block = 2
disp_z = disp_y
disp_r = disp_x
poissons_ratio = 0.3
youngs_modulus = 1e6
[../]
[]
[Executioner]
type = Transient
#Preconditioned JFNK (default)
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
l_max_its = 50
nl_max_its = 100
dt = 1.0
end_time = 1.0
num_steps = 10
dtmin = 1.0
l_tol = 1e-5
[]
[VectorPostprocessors]
[./x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '1 3 4 5'
sort_by = x
[../]
[./cont_press]
type = NodalValueSampler
variable = contact_pressure
boundary = '3'
sort_by = x
[../]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
[./exodus]
type = Exodus
elemental_as_nodal = true
[../]
[./console]
type = Console
max_rows = 5
[../]
[./chkfile]
type = CSV
show = 'bot_react_x bot_react_y disp_x9 disp_y9 disp_x16 disp_y16 sigma_yy sigma_zz top_react_x top_react_y x_disp cont_press'
execute_vector_postprocessors_on = timestep_end
[../]
[./outfile]
type = CSV
delimiter = ' '
execute_vector_postprocessors_on = none
[../]
[]
[Contact]
[./leftright]
slave = 3
master = 4
system = constraint
normalize_penalty = true
tangential_tolerance = 1e-3
penalty = 1e+9
al_penetration_tolerance = 1e-8
[../]
[]
test/tests/materials/material/bnd_material_test.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
nx = 3
ny = 3
nz = 3
[]
# Nonlinear system
[Variables]
active = 'u'
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 1
[../]
[./right]
type = MTBC
variable = u
boundary = right
grad = 8
prop_name = matp
[../]
[]
# auxiliary system
[AuxVariables]
[./matp]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./prop]
type = MaterialRealAux
property = matp
variable = matp
boundary = 'left right'
[../]
[]
[Materials]
[./mat_left]
type = MTMaterial
boundary = left
[../]
[./mat_right]
type = MTMaterial
boundary = right
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]