- inputThe mesh we want to modify
C++ Type:MeshGeneratorName
Description:The mesh we want to modify
RenameBoundaryGenerator
RenameBoundaryGenerator re-numbers or re-names an old_boundary_id or old_boundary_name with a new_boundary_id or new_boundary_name. If using RenameBoundaryGenerator to merge boundaries (by giving them the same name, for instance) it is advisable to specify all your boundaries in old_boundaries to avoid inconsistencies
RenameBoundaryGenerator is usually used to provide meaningful names to boundaries. For instance
old_boundary_id = '1 2 3'
new_boundary_name = 'right top left'
Then the MOOSE input file can employ boundary = right rather than boundary = 1. RenameBoundaryGenerator may also be used to provide more meaningful names to boundaries that are already named. For instance
old_boundary_name = 'silly meaningless crazy'
new_boundary_name = 'right top left'
Then the MOOSE input file can employ boundary = left rather than block = crazy.
warning
RenameBoundaryGenerator may also be used to merge boudaries, but care must be taken.
For instance
old_boundary_id = '1 2 3'
new_boundary_id = '4 4 4'
Then boudaries 1, 2 and 3 will be merged together into one boundary that may be used in the remainder of the input file. However, when merging boundaries problems and even inconsistencies can occur.
Firstly, in the example just given, what if the boundaries 1, 2 and 3 were named? What should the name of the boundary 4 be? The convention is that it is the name of the first old boundary that is given the boundary ID of 4, which is the name of the old boundary 1 in this case. The user needs to be aware of this convention. Similarly, if old_boundary_name = 'oldA oldB' and new_boundary_name = 'new1 new1', then the boundary ID of new1 is the boundary ID of oldA.
Secondly, in the example above, what if boundary 4 already existed? An inconsistency could arise in the input file, because boundary 4 is now given the name of the old boundary 1.
Thirdly, in this example old_boundary_id = '1 2' and new_boundary_name = 'wheel wheel'
what if another boundary, with a different ID, already had the name "wheel"? This can lead to great confusion in the MOOSE input file.
note
Given all these potential problems, when merging boundaries it is strongly recommended to use just one** RenameBoundaryGenerator that includes the names or IDs of all** the boundaries involved in the merging. This will make the new boundary IDs and new boundary names unequivocally obvious.
Input Parameters
- new_boundary_idElements with the old boundary number (or name) will be given this boundary number. If the old boundaries are named, their names will be passed onto the newly numbered boundarys.
C++ Type:std::vector
Options:
Description:Elements with the old boundary number (or name) will be given this boundary number. If the old boundaries are named, their names will be passed onto the newly numbered boundarys.
- new_boundary_nameElements with the old boundary number (or name) will be given this boundary name. No change of boundary ID is performed, unless multiple old boundaries are given the same name, in which case they are all given the first old boundary number.
C++ Type:std::vector
Options:
Description:Elements with the old boundary number (or name) will be given this boundary name. No change of boundary ID is performed, unless multiple old boundaries are given the same name, in which case they are all given the first old boundary number.
- old_boundary_idElements with this boundary number will be given the new_boundary_number or new_boundary_name. You must supply either old_boundary_id or old_boundary_name. You may supply a vector of old_boundary_id, in which case the new_boundary information must also be a vector.
C++ Type:std::vector
Options:
Description:Elements with this boundary number will be given the new_boundary_number or new_boundary_name. You must supply either old_boundary_id or old_boundary_name. You may supply a vector of old_boundary_id, in which case the new_boundary information must also be a vector.
- old_boundary_nameElements with this boundary name will be given the new_boundary_number or new_boundary_name. You must supply either old_boundary_id or old_boundary_name. You may supply a vector of old_boundary_name, in which case the new_boundary information must also be a vector.
C++ Type:std::vector
Options:
Description:Elements with this boundary name will be given the new_boundary_number or new_boundary_name. You must supply either old_boundary_id or old_boundary_name. You may supply a vector of old_boundary_name, in which case the new_boundary information must also be a vector.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
Advanced Parameters
Input Files
- modules/combined/test/tests/mortar_tm/2drz/frictionless_first/small.i
- modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_first/finite_rr.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_first/small.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_first/finite_rr.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_first/finite_rr.i
- modules/combined/test/tests/mortar_tm/2d/ad_frictionless_fir/finite_rr.i
- modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_second/finite_rr.i
- modules/combined/test/tests/mortar_tm/2d/ad_frictionless_fir/small.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_first/finite.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_first/finite.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_first/finite_noaction.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_second/finite.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_second/small.i
- modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_first/small.i
- modules/combined/test/tests/mortar_tm/2d/ad_frictionless_sec/finite.i
- modules/combined/test/tests/mortar_tm/2d/ad_frictionless_fir/finite.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_first/finite_noaction.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_second/small.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_second/finite_rr.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_second/finite.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_second/finite_noaction.i
- modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_second/finite.i
- modules/combined/test/tests/mortar_tm/2d/ad_frictionless_sec/finite_rr.i
- modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_second/small.i
- modules/combined/test/tests/mortar_tm/2drz/frictionless_second/finite_rr.i
- modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_first/finite.i
- test/tests/meshgenerators/rename_boundary_generator/rename_boundary.i
- modules/combined/test/tests/mortar_tm/2d/frictionless_second/finite_noaction.i
- modules/combined/test/tests/mortar_tm/2d/ad_frictionless_sec/small.i
modules/combined/test/tests/mortar_tm/2drz/frictionless_first/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'small'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./corner]
type = ExtraNodesetGenerator
input = block_rename
coord = '0 -10.0'
new_boundary = point
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = corner
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeLinearElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_first/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite_rr'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
extra_vector_tags = 'ref'
[../]
[./plank]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
extra_vector_tags = 'ref'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ADComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-12
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_first/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'small'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeLinearElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_first/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite_rr'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
extra_vector_tags = 'ref'
[../]
[./plank]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
extra_vector_tags = 'ref'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-12
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_first/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite_rr'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
extra_vector_tags = 'ref'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-7
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/ad_frictionless_fir/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite_rr'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
extra_vector_tags = 'ref'
use_automatic_differentiation = true
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-7
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_second/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite_rr'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
extra_vector_tags = 'ref'
[../]
[./plank]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
extra_vector_tags = 'ref'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = block_right
value = 0
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ADComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-12
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/ad_frictionless_fir/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'small'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeLinearElasticStress
block = 'plank block'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_first/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_first/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_first/finite_noaction.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite_noaction'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[./slave]
input = block_sidesets
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_slave_subdomain'
[../]
[./master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_master_subdomain'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./frictionless_normal_lm]
order = ${order}
block = 'frictionless_slave_subdomain'
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = block_left
master = plank_right
variable = frictionless_normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
[../]
[./normal_x]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[./normal_y]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_second/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = iteration
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
l_max_its = 30
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_second/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'small'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./corner]
type = ExtraNodesetGenerator
input = block_rename
coord = '0 -10.0'
new_boundary = point
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = corner
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeLinearElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_first/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'small'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./corner]
type = ExtraNodesetGenerator
input = block_rename
coord = '0 -10.0'
new_boundary = point
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = corner
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
use_automatic_differentiation = true
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
use_automatic_differentiation = true
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeLinearElasticStress
block = 'plank block'
[../]
[./swell]
type = ADComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/ad_frictionless_sec/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = ADFunctionDirichletBC
variable = disp_x
preset = false
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/ad_frictionless_fir/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_first/finite_noaction.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite_noaction'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[./slave]
input = block_sidesets
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_slave_subdomain'
[../]
[./master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_master_subdomain'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./frictionless_normal_lm]
order = ${order}
block = 'frictionless_slave_subdomain'
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = block_left
master = plank_right
variable = frictionless_normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
[../]
[./normal_x]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[./normal_y]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_second/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'small'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeLinearElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_second/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite_rr'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
extra_vector_tags = 'ref'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-7
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_second/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_second/finite_noaction.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite_noaction'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[./slave]
input = block_sidesets
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_slave_subdomain'
[../]
[./master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_master_subdomain'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./frictionless_normal_lm]
order = ${order}
block = 'frictionless_slave_subdomain'
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = block_left
master = plank_right
variable = frictionless_normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
[../]
[./normal_x]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[./normal_y]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_second/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = block_right
value = 0
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ADComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/ad_frictionless_sec/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite_rr'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
extra_vector_tags = 'ref'
use_automatic_differentiation = true
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = ADFunctionDirichletBC
variable = disp_x
preset = false
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-7
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_second/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'small'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./corner]
type = ExtraNodesetGenerator
input = block_rename
coord = '0 -10.0'
new_boundary = point
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = corner
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
use_automatic_differentiation = true
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
use_automatic_differentiation = true
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeLinearElasticStress
block = 'plank block'
[../]
[./swell]
type = ADComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/frictionless_second/finite_rr.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite_rr'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
extra_vector_tags = 'ref'
[../]
[./plank]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
extra_vector_tags = 'ref'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = block_right
value = 0
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
nl_abs_tol = 1e-12
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2drz/ad_frictionless_first/finite.i
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Problem]
coord_type = RZ
[]
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 9.2
ymax = 10.0
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.9 9.2 0
1.21 9.5 0
0.9 10.0 0
0.61 9.5 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./block]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'block'
[../]
[./plank]
use_automatic_differentiation = true
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank'
eigenstrain_names = 'swell'
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = DirichletBC
variable = disp_x
boundary = block_right
value = 0
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[./swell]
type = ADComputeEigenstrain
block = 'plank'
eigenstrain_name = swell
eigen_base = '1 0 0 0 0 0 0 0 0'
prefactor = swell_mat
[../]
[./swell_mat]
type = GenericFunctionMaterial
prop_names = 'swell_mat'
prop_values = '7e-2*(1-cos(4*t))'
block = 'plank'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 10
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
test/tests/meshgenerators/rename_boundary_generator/rename_boundary.i
[Mesh]
[./gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
# Rename parameters supplied through the "tests" specifications
[./rename]
type = RenameBoundaryGenerator
input = gmg
[]
[]
[Outputs]
exodus = true
[]
modules/combined/test/tests/mortar_tm/2d/frictionless_second/finite_noaction.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'finite_noaction'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[./slave]
input = block_sidesets
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_slave_subdomain'
[../]
[./master]
input = slave
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_master_subdomain'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./frictionless_normal_lm]
order = ${order}
block = 'frictionless_slave_subdomain'
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
strain = FINITE
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
[../]
[]
[Constraints]
[./lm]
type = NormalNodalLMMechanicalContact
slave = block_left
master = plank_right
variable = frictionless_normal_lm
master_variable = disp_x
disp_y = disp_y
ncp_function_type = min
use_displaced_mesh = true
[../]
[./normal_x]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[./normal_y]
type = NormalMortarMechanicalContact
master_boundary = plank_right
slave_boundary = block_left
master_subdomain = frictionless_master_subdomain
slave_subdomain = frictionless_slave_subdomain
variable = frictionless_normal_lm
slave_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
preset = false
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
preset = false
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[../]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]
modules/combined/test/tests/mortar_tm/2d/ad_frictionless_sec/small.i
E_block = 1e7
E_plank = 1e7
elem = QUAD9
order = SECOND
name = 'small'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[./plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
[../]
[./plank_sidesets]
type = RenameBoundaryGenerator
input = plank
old_boundary_id = '0 1 2 3'
new_boundary_name = 'plank_bottom plank_right plank_top plank_left'
[../]
[./plank_id]
type = SubdomainIDGenerator
input = plank_sidesets
subdomain_id = 1
[../]
[./block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
[../]
[./block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[../]
[./combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[../]
[./block_rename]
type = RenameBlockGenerator
input = combined
old_block_id = '1 2'
new_block_name = 'plank block'
[../]
[./block_sidesets]
type = SideSetsFromPointsGenerator
input = block_rename
points = '0.6 7.7 0
0.91 8.0 0
0.6 8.5 0
0.31 8.0 0'
new_boundary = 'block_bottom block_right block_top block_left'
[../]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[./disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[./disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[../]
[]
[Modules/TensorMechanics/Master]
[./action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
[../]
[]
[Contact]
[./frictionless]
mesh = block_sidesets
master = plank_right
slave = block_left
formulation = mortar
system = constraint
[../]
[]
[BCs]
[./left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[../]
[./left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[../]
[./right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[../]
[./right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[../]
[]
[Materials]
[./plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[../]
[./block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[../]
[./stress]
type = ADComputeLinearElasticStress
block = 'plank block'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -mat_mffd_err -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu 1e-5 NONZERO 1e-15'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'contact'
[]
[Postprocessors]
[./nl_its]
type = NumNonlinearIterations
[../]
[./total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[../]
[./l_its]
type = NumLinearIterations
[../]
[./total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[../]
[./contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_slave_subdomain
[../]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[../]
[./max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[../]
[./min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[../]
[./max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[../]
[./min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[../]
[]
[Outputs]
exodus = true
file_base = ${name}
[./comp]
type = CSV
show = 'contact'
[../]
[./out]
type = CSV
file_base = '${name}_out'
[../]
[]
[Debug]
show_var_residual_norms = true
[]