- variableThe name of the variable that this Kernel operates on
C++ Type:NonlinearVariableName
Description:The name of the variable that this Kernel operates on
Reaction
Description
Reaction implements a simple first-order reaction term with unity rate coefficient where the rate of reaction is directly proportional to the governing variable . Its weak form is given by
Reaction can be used to help set-up variations of advection-diffusion-reaction equations.
Example Syntax
The syntax for Reaction is simple, only taking the type and variable parameters. An example block is shown below for a diffusion-reaction equation:
[Kernels]
active = 'diff abs forcing'
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
/opt/civet/build_0/moose/test/tests/dgkernels/2d_diffusion_dg/2d_diffusion_dg_test.i
###########################################################
# This is a test of the Discontinuous Galerkin System.
# Discontinous basis functions are used (Monomials) and
# a the Laplacian DGKernel contributes to the
# internal edges around each element. Jumps are allowed
# by penalized by this method.
#
# @Requirement F3.60
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
# xmin = -1
# xmax = 1
# ymin = -1
# ymax = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[Functions]
active = 'forcing_fn exact_fn'
[./forcing_fn]
type = ParsedFunction
# function = -4.0+(x*x)+(y*y)
# function = x
# function = (x*x)-2.0
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
# function = (x*x*x)-6.0*x
[../]
[./exact_fn]
type = ParsedGradFunction
# function = x
# grad_x = 1
# grad_y = 0
# function = (x*x)+(y*y)
# grad_x = 2*x
# grad_y = 2*y
# function = (x*x)
# grad_x = 2*x
# grad_y = 0
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
# function = (x*x*x)
# grad_x = 3*x*x
# grad_y = 0
[../]
[]
[Kernels]
active = 'diff abs forcing'
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
active = 'dg_diff'
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[]
[BCs]
active = 'all'
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
# petsc_options = '-snes_mf'
# petsc_options_iname = '-pc_type -pc_hypre_type'
# petsc_options_value = 'hypre boomeramg'
# petsc_options = '-snes_mf'
# max_r_steps = 2
[./Adaptivity]
steps = 2
refine_fraction = 1.0
coarsen_fraction = 0
max_h_level = 8
[../]
nl_rel_tol = 1e-10
# nl_rel_tol = 1e-12
[]
[Postprocessors]
active = 'h dofs l2_err'
[./h]
type = AverageElementSize
[../]
[./dofs]
type = NumDOFs
[../]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Outputs]
file_base = out
exodus = true
csv = true
[]
Input Parameters
- blockThe list of block ids (SubdomainID) that this object will be applied
C++ Type:std::vector
Options:
Description:The list of block ids (SubdomainID) that this object will be applied
- displacementsThe displacements
C++ Type:std::vector
Options:
Description:The displacements
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
- diag_save_inThe name of auxiliary variables to save this Kernel's diagonal Jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
C++ Type:std::vector
Options:
Description:The name of auxiliary variables to save this Kernel's diagonal Jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Options:
Description:Determines whether this object is calculated using an implicit or explicit form
- save_inThe name of auxiliary variables to save this Kernel's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
C++ Type:std::vector
Options:
Description:The name of auxiliary variables to save this Kernel's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Options:
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Options:
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector
Options:
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector
Options:
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime system
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime time
Description:The tag for the vectors this Kernel should fill
Tagging Parameters
Input Files
- test/tests/mortar/continuity-2d-non-conforming/sequencing-stateful-soln-continuity.i
- test/tests/auxkernels/time_derivative/time_derivative.i
- test/tests/misc/check_error/kernel_with_aux_var.i
- test/tests/problems/eigen_problem/ne_coupled_picard.i
- test/tests/mortar/continuity-2d-non-conforming/soln-continuity.i
- test/tests/dgkernels/3d_diffusion_dg/3d_diffusion_dg_test.i
- test/tests/misc/check_error/coupled_grad_without_declare.i
- test/tests/dgkernels/2d_diffusion_dg/no_functor_additions.i
- test/tests/variables/fe_hier/hier-3-3d.i
- test/tests/dgkernels/adaptivity/adaptivity.i
- test/tests/transfers/multiapp_conservative_transfer/sub_power_density.i
- test/tests/dgkernels/2d_diffusion_dg/no_mallocs_with_action.i
- test/tests/variables/fe_hermite/hermite-3-2d.i
- test/tests/materials/boundary_material/bnd_coupling_vol.i
- test/tests/materials/material/material_test_dg.i
- test/tests/dgkernels/ad_dg_diffusion/2d_diffusion_ad_dg_test.i
- test/tests/executioners/solve_type_linear/linear_with_full_smp.i
- test/tests/misc/check_error/dg_kernel_with_aux_var.i
- test/tests/dgkernels/2d_diffusion_dg/dg_stateful.i
- test/tests/mesh_modifiers/mesh_side_set/test.i
- test/tests/dgkernels/dg_displacement/dg_displacement.i
- test/tests/auxkernels/time_derivative/coupled_aux_time_derivative.i
- test/tests/variables/fe_hier/hier-2-3d.i
- test/tests/variables/fe_hier/hier-3-2d.i
- test/tests/variables/fe_hermite_convergence/hermite_converge_dirichlet.i
- test/tests/transfers/multiapp_high_order_variable_transfer/master_L2_Lagrange_userobject.i
- modules/phase_field/test/tests/phase_field_crystal/PFCTrad/PFCTrad_test.i
- test/tests/misc/check_error/scalar_kernel_with_var.i
- test/tests/outputs/debug/show_var_residual_norms_debug.i
- test/tests/variables/fe_hier/hier-1-3d.i
- modules/phase_field/test/tests/mobility_derivative/coupledmatdiffusion.i
- modules/phase_field/test/tests/phase_field_crystal/PFCEnergyDensity/auxkernel.i
- test/tests/tag/2d_diffusion_dg_tag.i
- test/tests/outputs/debug/show_var_residual_norms.i
- test/tests/variables/fe_monomial_const/monomial-const-3d.i
- test/tests/transfers/multiapp_high_order_variable_transfer/master_L2_Lagrange.i
- test/tests/interfacekernels/adaptivity/adaptivity.i
- test/tests/misc/check_error/bc_with_aux_var.i
- test/tests/variables/previous_newton_iteration/test.i
- test/tests/variables/fe_hier/hier-1-2d.i
- test/tests/misc/check_error/missing_req_par_mesh_block_test.i
- test/tests/transfers/multiapp_high_order_variable_transfer/master_L2_Lagrange_conservative.i
- test/tests/variables/fe_hier/hier-3-1d.i
- test/tests/tag/2d_diffusion_vector_tag_test.i
- test/tests/bcs/penalty_dirichlet_bc/function_penalty_dirichlet_bc_test.i
- test/tests/variables/fe_hermite_convergence/hermite_converge_periodic.i
- test/tests/problems/eigen_problem/ne_coupled_picard_subT_sub.i
- test/tests/variables/fe_monomial_const/monomial-const-1d.i
- test/tests/variables/fe_hermite/hermite-3-3d.i
- test/tests/postprocessors/side_pps/side_pps_multi_bnd_test.i
- modules/phase_field/test/tests/SimpleACInterface/SimpleCoupledACInterface.i
- test/tests/postprocessors/element_average_value/elem_pps_multi_block_test.i
- test/tests/misc/check_error/scalar_aux_kernel_with_var.i
- test/tests/time_integrators/actually_explicit_euler_verification/ee-1d-quadratic-neumann.i
- test/tests/misc/check_error/dirac_kernel_with_aux_var.i
- test/tests/multiapps/grid-sequencing/fine.i
- test/tests/problems/eigen_problem/dg_krylovschur.i
- modules/phase_field/test/tests/phase_field_crystal/PFCTrad/pfct_newton_split1_asm1_10.i
- modules/phase_field/test/tests/phase_field_crystal/PFCTrad/pfct_newton_split1_asm5.i
- test/tests/variables/fe_hier/hier-2-2d.i
- test/tests/variables/fe_monomial_const/monomial-const-2d.i
- test/tests/misc/check_error/kernel_with_empty_var.i
- test/tests/multiapps/grid-sequencing/coarse.i
- test/tests/controls/time_periods/dgkernels/dgkernels.i
- test/tests/meshgenerators/mesh_side_set_generator/mesh_side_set_generator.i
- test/tests/mortar/gap-conductance-2d-non-conforming/gap-conductance.i
- modules/phase_field/test/tests/Nucleation/force.i
- test/tests/transfers/multiapp_conservative_transfer/sub_nearest_point.i
- test/tests/variables/fe_hier/hier-1-1d.i
- test/tests/time_integrators/implicit-euler/ie-monomials.i
- modules/phase_field/test/tests/phase_field_kernels/CoupledAllenCahn.i
- test/tests/variables/fe_hier/hier-2-1d.i
- test/tests/time_integrators/explicit-euler/ee-1d-quadratic-neumann.i
- test/tests/variables/fe_hermite/hermite-3-1d.i
- test/tests/misc/check_error/aux_kernel_with_var.i
- test/tests/bcs/penalty_dirichlet_bc/penalty_dirichlet_bc_test.i
- test/tests/dgkernels/2d_diffusion_dg/2d_diffusion_dg_test.i
- test/tests/misc/check_error/interface_kernel_with_aux_var.i
- test/tests/preconditioners/pbp/pbp_dg_test.i
test/tests/mortar/continuity-2d-non-conforming/sequencing-stateful-soln-continuity.i
[Mesh]
second_order = true
[file]
type = FileMeshGenerator
file = nodal_normals_test_offset_nonmatching_gap.e
[]
[./master]
input = file
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '20'
[../]
[./slave]
input = master
type = LowerDBlockFromSidesetGenerator
sidesets = '1'
new_block_id = '10'
[../]
[]
[Variables]
[./T]
block = '1 2'
order = SECOND
[../]
[./lambda]
block = '10'
[../]
[]
[AuxVariables]
[ssm]
order = CONSTANT
family = MONOMIAL
block = '1 2'
[]
[]
[BCs]
[./neumann]
type = FunctionGradientNeumannBC
exact_solution = exact_soln
variable = T
boundary = '3 4 5 6 7 8'
[../]
[]
[Kernels]
[./conduction]
type = Diffusion
variable = T
block = '1 2'
[../]
[./sink]
type = Reaction
variable = T
block = '1 2'
[../]
[./forcing_function]
type = BodyForce
variable = T
function = forcing_function
block = '1 2'
[../]
[]
[AuxKernels]
[ssm]
type = MaterialRealAux
variable = ssm
property = diffusivity
block = '1 2'
[]
[]
[Materials]
[./ssm]
type = SpatialStatefulMaterial
block = '1 2'
[../]
[]
[Functions]
[./forcing_function]
type = ParsedFunction
value = '-4 + x^2 + y^2'
[../]
[./exact_soln]
type = ParsedFunction
value = 'x^2 + y^2'
[../]
[]
[Debug]
show_var_residual_norms = 1
[]
[Constraints]
[./mortar]
type = EqualValueConstraint
master_boundary = 2
slave_boundary = 1
master_subdomain = 20
slave_subdomain = 10
variable = lambda
slave_variable = T
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
solve_type = NEWTON
type = Steady
nl_abs_tol = 1e-12
petsc_options_iname = '-pc_type -snes_linesearch_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu basic NONZERO 1e-15'
num_grids = 2
[]
[Outputs]
exodus = true
[]
[Adaptivity]
steps = 1
marker = uniform
[Markers]
[uniform]
type = UniformMarker
mark = refine
[]
[]
[]
test/tests/auxkernels/time_derivative/time_derivative.i
# This test is setting the values of an auxiliary varaible f according to the
# function f_fn. This function is time dependent.
#
# Then the f_dot is brought as a forcing function into the L2 projection, thus
# the resulting values of u should give the f_dot which is known.
#
# NOTE: There is no need to do more than 2 time steps, because f_dot is constant
# in time. That means that the projection is exactly the same for the second time
# step as is for the first time step. The solver has nothing to do and you can
# see that on the "zero" initial non-linear residual.
#
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
[]
[Functions]
[./f_fn]
type = ParsedFunction
value = t*(x+y)
[../]
[./f_dot_fn]
type = ParsedFunction
value = (x+y)
[../]
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./l2_proj]
type = Reaction
variable = u
[../]
[./dck]
type = DotCouplingKernel
variable = u
v = f
[../]
[]
[AuxVariables]
[./f]
[../]
[]
[AuxKernels]
[./f_k]
type = FunctionAux
variable = f
function = f_fn
[../]
[]
[Postprocessors]
[./l2_error]
type = ElementL2Error
variable = u
function = f_dot_fn
[../]
[]
[Executioner]
type = Transient
dt = 0.1
num_steps = 2
nl_abs_tol = 1.e-15
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
test/tests/misc/check_error/kernel_with_aux_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = v
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/problems/eigen_problem/ne_coupled_picard.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 10
elem_type = QUAD4
nx = 8
ny = 8
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
# set this so that the Picard initial norm is not zero
initial_condition = 1
[../]
[]
[AuxVariables]
[./T]
order = FIRST
family = LAGRANGE
# set this so that the Picard initial norm is not zero
initial_condition = 1
[../]
[./power]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./diff]
type = DiffMKernel
variable = u
mat_prop = diffusion
offset = 0.0
[../]
[./rhs]
type = Reaction
variable = u
extra_vector_tags = 'eigen'
[../]
[]
[AuxKernels]
[./power_ak]
type = NormalizationAux
variable = power
source_variable = u
normalization = unorm
# this coefficient will affect the eigenvalue.
normal_factor = 10
execute_on = timestep_end
[../]
[]
[BCs]
[./homogeneous]
type = DirichletBC
variable = u
boundary = '0 1 2 3'
value = 0
[../]
[./eigenU]
type = EigenDirichletBC
variable = u
boundary = '0 1 2 3'
[../]
[]
[Materials]
[./dc]
type = VarCouplingMaterial
var = T
block = 0
base = 1.0
coef = 1.0
[../]
[]
[Executioner]
type = Eigenvalue
solve_type = MF_MONOLITH_NEWTON
eigen_problem_type = GEN_NON_HERMITIAN
picard_max_its = 10
picard_rel_tol = 1e-6
[]
[Postprocessors]
[./unorm]
type = ElementIntegralVariablePostprocessor
variable = u
execute_on = linear
[../]
[]
[VectorPostprocessors]
[./eigenvalues]
type = Eigenvalues
execute_on = 'timestep_end'
[../]
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
[MultiApps]
[./sub]
type = FullSolveMultiApp
input_files = ne_coupled_picard_sub.i
execute_on = timestep_end
[../]
[]
[Transfers]
[./T_from_sub]
type = MultiAppNearestNodeTransfer
direction = from_multiapp
multi_app = sub
source_variable = T
variable = T
[../]
[./power_to_sub]
type = MultiAppNearestNodeTransfer
direction = to_multiapp
multi_app = sub
source_variable = power
variable = power
[../]
[]
test/tests/mortar/continuity-2d-non-conforming/soln-continuity.i
[Mesh]
second_order = true
[file]
type = FileMeshGenerator
file = nodal_normals_test_offset_nonmatching_gap.e
[]
[./master]
input = file
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '20'
[../]
[./slave]
input = master
type = LowerDBlockFromSidesetGenerator
sidesets = '1'
new_block_id = '10'
[../]
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[./T]
block = '1 2'
order = SECOND
[../]
[./lambda]
block = '10'
[../]
[]
[BCs]
[./neumann]
type = FunctionGradientNeumannBC
exact_solution = exact_soln
variable = T
boundary = '3 4 5 6 7 8'
[../]
[]
[Kernels]
[./conduction]
type = Diffusion
variable = T
block = '1 2'
[../]
[./sink]
type = Reaction
variable = T
block = '1 2'
[../]
[./forcing_function]
type = BodyForce
variable = T
function = forcing_function
block = '1 2'
[../]
[]
[Functions]
[./forcing_function]
type = ParsedFunction
value = '-4 + x^2 + y^2'
[../]
[./exact_soln]
type = ParsedFunction
value = 'x^2 + y^2'
[../]
[]
[Debug]
show_var_residual_norms = 1
[]
[Constraints]
[./mortar]
type = EqualValueConstraint
master_boundary = 2
slave_boundary = 1
master_subdomain = 20
slave_subdomain = 10
variable = lambda
slave_variable = T
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
solve_type = NEWTON
type = Steady
petsc_options_iname = '-pc_type -snes_linesearch_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu basic NONZERO 1e-15'
[]
[Outputs]
exodus = true
[dofmap]
type = DOFMap
execute_on = 'initial'
[]
[]
test/tests/dgkernels/3d_diffusion_dg/3d_diffusion_dg_test.i
[Mesh]
type = GeneratedMesh
dim = 3
nx = 5
ny = 5
nz = 5
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
elem_type = HEX8
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 0.5
[../]
[../]
[]
[Functions]
active = 'forcing_fn exact_fn'
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
active = 'diff abs forcing'
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
active = 'dg_diff'
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[]
[BCs]
active = 'all'
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3 4 5'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Postprocessors]
active = 'h dofs l2_err'
[./h]
type = AverageElementSize
execute_on = 'initial timestep_end'
[../]
[./dofs]
type = NumDOFs
execute_on = 'initial timestep_end'
[../]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
execute_on = 'initial timestep_end'
[../]
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/misc/check_error/coupled_grad_without_declare.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD9
[]
[Functions]
[./forcing_fnu]
type = ParsedFunction
value = -5.8*(x+y)+x*x*x-x+y*y*y-y
[../]
[./forcing_fnv]
type = ParsedFunction
value = -4
[../]
[./slnu]
type = ParsedGradFunction
value = x*x*x-x+y*y*y-y
grad_x = 3*x*x-1
grad_y = 3*y*y-1
[../]
[./slnv]
type = ParsedGradFunction
value = x*x+y*y
grad_x = 2*x
grad_y = 2*y
[../]
#NeumannBC functions
[./bc_fnut]
type = ParsedFunction
value = 3*y*y-1
[../]
[./bc_fnub]
type = ParsedFunction
value = -3*y*y+1
[../]
[./bc_fnul]
type = ParsedFunction
value = -3*x*x+1
[../]
[./bc_fnur]
type = ParsedFunction
value = 3*x*x-1
[../]
[]
[Variables]
[./u]
order = THIRD
family = HIERARCHIC
[../]
[./v]
order = SECOND
family = LAGRANGE
[../]
[]
[Kernels]
active = 'diff1 diff2 test1 forceu forcev react'
[./diff1]
type = Diffusion
variable = u
[../]
[./test1]
type = CoupledConvection
variable = u
velocity_vector = v
# Trigger the error in this class
test_coupling_declaration_error = true
[../]
[./diff2]
type = Diffusion
variable = v
[../]
[./react]
type = Reaction
variable = u
[../]
[./forceu]
type = BodyForce
variable = u
function = forcing_fnu
[../]
[./forcev]
type = BodyForce
variable = v
function = forcing_fnv
[../]
[]
[BCs]
active = 'bc_u_tb bc_v bc_ul bc_ur bc_ut bc_ub'
[./bc_u]
type = FunctionPenaltyDirichletBC
variable = u
function = slnu
boundary = 'left right top bottom'
penalty = 1e6
[../]
[./bc_v]
type = FunctionDirichletBC
variable = v
function = slnv
boundary = 'left right top bottom'
[../]
[./bc_u_lr]
type = FunctionPenaltyDirichletBC
variable = u
function = slnu
boundary = 'left right top bottom'
penalty = 1e6
[../]
[./bc_u_tb]
type = CoupledKernelGradBC
variable = u
var2 = v
vel = '0.1 0.1'
boundary = 'top bottom left right'
[../]
[./bc_ul]
type = FunctionNeumannBC
variable = u
function = bc_fnul
boundary = 'left'
[../]
[./bc_ur]
type = FunctionNeumannBC
variable = u
function = bc_fnur
boundary = 'right'
[../]
[./bc_ut]
type = FunctionNeumannBC
variable = u
function = bc_fnut
boundary = 'top'
[../]
[./bc_ub]
type = FunctionNeumannBC
variable = u
function = bc_fnub
boundary = 'bottom'
[../]
[]
[Preconditioning]
active = ' '
[./prec]
type = SMP
full = true
[../]
[]
[Postprocessors]
active='L2u L2v'
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2u]
type = ElementL2Error
variable = u
function = slnu
[../]
[./L2v]
type = ElementL2Error
variable = v
function = slnv
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
# petsc_options = '-snes'
nl_rel_tol = 1e-15
nl_abs_tol = 1e-13
[]
[Outputs]
execute_on = 'timestep_end'
[]
[Debug]
show_var_residual_norms = true
[]
test/tests/dgkernels/2d_diffusion_dg/no_functor_additions.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[AuxVariables]
[v]
order = FIRST
family = MONOMIAL
[]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[regular_dg_diffusion]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[]
[]
[DGDiffusionAction]
variable = u
kernels_to_add = 'COUPLED'
coupled_var = v
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
csv = true
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Postprocessors]
[num_rm]
type = NumRelationshipManagers
[]
[]
test/tests/variables/fe_hier/hier-3-3d.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
nx = 1
ny = 1
nz = 1
elem_type = HEX27
# This problem only has 1 element, so using DistributedMesh in parallel
# isn't really an option, and we don't care that much about DistributedMesh
# in serial.
parallel_type = replicated
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 3*y*y
[../]
[./bc_fnb]
type = ParsedFunction
value = -3*y*y
[../]
[./bc_fnl]
type = ParsedFunction
value = -3*x*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 3*x*x
[../]
[./bc_fnk]
type = ParsedFunction
value = -3*z*z
[../]
[./bc_fnf]
type = ParsedFunction
value = 3*z*z
[../]
[./forcing_fn]
type = ParsedFunction
value = -6*x-6*y-6*z+(x*x*x)+(y*y*y)+(z*z*z)
[../]
[./solution]
type = ParsedGradFunction
value = (x*x*x)+(y*y*y)+(z*z*z)
grad_x = 3*x*x
grad_y = 3*y*y
grad_z = 3*z*z
[../]
[]
[Variables]
[./u]
order = THIRD
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[./bc_front]
type = FunctionNeumannBC
variable = u
boundary = 'front'
function = bc_fnf
[../]
[./bc_back]
type = FunctionNeumannBC
variable = u
boundary = 'back'
function = bc_fnk
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/dgkernels/adaptivity/adaptivity.i
# This input file is used for two tests:
# 1) Check that DGKernels work with mesh adaptivity
# 2) Error out when DGKernels are used with adaptivity
# and stateful material prpoerties
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
parallel_type = 'replicated'
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = (x*x*x)-6.0*x
[../]
[./bc_fn]
type = ParsedFunction
value = (x*x*x)
[../]
[]
[Kernels]
[./diff]
type = MatDiffusionTest
variable = u
prop_name = diffusivity
[../]
[./abs]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[./dgdiff]
type = DGDiffusion
variable = u
sigma = 6
epsilon = -1.0
diff = diffusivity
[../]
[]
[BCs]
active = 'all'
[./all]
type = DGMDDBC
variable = u
boundary = '1 2 3 4'
function = bc_fn
prop_name = diffusivity
sigma = 6
epsilon = -1.0
[../]
[]
[Materials]
active = 'constant'
[./stateful]
type = StatefulTest
prop_names = 'diffusivity'
prop_values = '1'
[../]
[./constant]
type = GenericConstantMaterial
prop_names = 'diffusivity'
prop_values = '1'
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Adaptivity]
marker = 'marker'
steps = 1
[./Indicators]
[./error]
type = GradientJumpIndicator
variable = u
[../]
[../]
[./Markers]
[./marker]
type = ErrorFractionMarker
coarsen = 0.5
indicator = error
refine = 0.5
[../]
[../]
[]
[Outputs]
exodus = true
[]
test/tests/transfers/multiapp_conservative_transfer/sub_power_density.i
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.01 # to make sure the meshes don't align
xmax = 0.49 # to make sure the meshes don't align
ymax = 1
nx = 10
ny = 10
[]
[block1]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0.2 0.2 0'
top_right = '0.3 0.8 0'
[]
[]
[Variables]
[sink]
family = MONOMIAL
order = CONSTANT
[]
[]
[Functions]
[sink_func]
type = ParsedFunction
value = '5e2*x*(0.5-x)+5e1'
[]
[]
[Kernels]
[reaction]
type = Reaction
variable = sink
[]
[coupledforce]
type = BodyForce
variable = sink
function = sink_func
[]
[]
[AuxVariables]
[from_master]
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Postprocessors]
[sink]
type = ElementIntegralVariablePostprocessor
block = 1
variable = sink
execute_on = 'transfer nonlinear TIMESTEP_END'
[]
[from_master_pp]
type = ElementIntegralVariablePostprocessor
block = 1
variable = from_master
execute_on = 'transfer nonlinear TIMESTEP_END'
[]
[]
[Outputs]
exodus = true
[]
test/tests/dgkernels/2d_diffusion_dg/no_mallocs_with_action.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[AuxVariables]
[v]
order = FIRST
family = MONOMIAL
[]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGDiffusionAction]
variable = u
epsilon = -1
sigma = 6
# We couple in an auxiliary variable in order to ensure that we've properly
# ghosted both non-linear and auxiliary solution vectors
coupled_var = v
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
csv = true
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Postprocessors]
active = 'num_rm'
[num_rm]
type = NumRelationshipManagers
[]
[num_internal_sides]
type = NumInternalSides
[]
[]
test/tests/variables/fe_hermite/hermite-3-2d.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 5
ny = 5
elem_type = QUAD9
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 3*y*y
[../]
[./bc_fnb]
type = ParsedFunction
value = -3*y*y
[../]
[./bc_fnl]
type = ParsedFunction
value = -3*x*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 3*x*x
[../]
[./forcing_fn]
type = ParsedFunction
value = -6*x-6*y+(x*x*x)+(y*y*y)
[../]
[./solution]
type = ParsedGradFunction
value = (x*x*x)+(y*y*y)
grad_x = 3*x*x
grad_y = 3*y*y
[../]
[]
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/materials/boundary_material/bnd_coupling_vol.i
#
# Coupling volumetric material property inside boundary restricted material
# Also bringing boundary restricted material inside another boundary restricted
# material
#
# Solving: k \Laplace u + u - f = 0
#
# u = x^2 + y^2
# k = 3, but is decomposed as k3vol = k1vol + k2vol, where k1vol = 1 and k2vol = 2
#
# Boundary material property is computed as k3bnd = k1vol + k2bnd
#
# The material properties with suffix `vol` are volumetric, the ones with suffix `bnd`
# are boundary restricted
#
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 4
ny = 4
elem_type = QUAD9
[]
[Functions]
[./exact_fn]
type = ParsedFunction
value = x*x+y*y
[../]
[./f_fn]
type = ParsedFunction
value = -4*3+x*x+y*y
[../]
[]
[Variables]
[./u]
family = LAGRANGE
order = SECOND
[../]
[]
[Kernels]
[./diff]
type = DiffMKernel
variable = u
offset = 0
mat_prop = k3vol
[../]
[./r]
type = Reaction
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = f_fn
[../]
[]
[BCs]
[./all]
type = MatDivergenceBC
variable = u
prop_name = k3bnd
boundary = 'left right top bottom'
[../]
[]
[Materials]
[./k1vol]
type = GenericConstantMaterial
prop_names = 'k1vol'
prop_values = 1
block = 0
[../]
[./k2vol]
type = GenericConstantMaterial
prop_names = 'k2vol'
prop_values = 2
block = 0
[../]
[./k2bnd]
type = GenericConstantMaterial
prop_names = 'k2bnd'
prop_values = 2
boundary = 'left right top bottom'
[../]
[./k3vol]
type = SumMaterial
sum_prop_name = k3vol
mp1 = k1vol
mp2 = k2vol
block = 0
val1 = 1
val2 = 2
[../]
[./k3bnd]
type = SumMaterial
sum_prop_name = 'k3bnd'
mp1 = k1vol
mp2 = k2bnd
boundary = 'left right top bottom'
val1 = 1
val2 = 2
[../]
[]
[Postprocessors]
[./l2err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
test/tests/materials/material/material_test_dg.i
[Mesh]
file = sq-2blk.e
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[Functions]
active = 'forcing_fn exact_fn'
[./forcing_fn]
type = ParsedFunction
value = (x*x*x)-6.0*x
[../]
[./exact_fn]
type = ParsedGradFunction
value = (x*x*x)
grad_x = 3*x*x
grad_y = 0
[../]
[]
[Kernels]
active = 'diff abs forcing'
[./diff]
type = MatDiffusionTest
variable = u
prop_name = matp
[../]
[./abs]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
active = 'dgdiff'
[./dgdiff]
type = DGDiffusion
variable = u
sigma = 6
epsilon = -1.0
diff = matp
[../]
[]
[BCs]
active = 'all'
[./all]
type = DGMDDBC
variable = u
boundary = '1 2 3 4'
function = exact_fn
prop_name = matp
sigma = 6
epsilon = -1.0
[../]
[]
[Materials]
active = 'mat_1 mat_2'
[./mat_1]
type = MTMaterial
block = 1
value = 1
[../]
[./mat_2]
type = MTMaterial
block = 2
value = 2
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
file_base = out_dg
exodus = true
[]
test/tests/dgkernels/ad_dg_diffusion/2d_diffusion_ad_dg_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[./dg_diff]
type = ADDGDiffusion
variable = u
epsilon = -1
sigma = 6
diff = diff
[../]
[]
[Materials]
[./ad_coupled_mat]
type = ADCoupledMaterial
coupled_var = u
ad_mat_prop = diff
regular_mat_prop = diff_regular
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[./Adaptivity]
steps = 2
refine_fraction = 1.0
coarsen_fraction = 0
max_h_level = 8
[../]
nl_rel_tol = 1e-10
[]
[Postprocessors]
[./h]
type = AverageElementSize
[../]
[./dofs]
type = NumDOFs
[../]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Outputs]
exodus = true
csv = true
[]
test/tests/executioners/solve_type_linear/linear_with_full_smp.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
ny = 5
[]
[Variables]
[u]
[]
[v]
[]
[]
[Kernels]
[u_diffusion]
type = Diffusion
variable = u
[]
[v_diffusion]
type = Diffusion
variable = v
[]
[u_reaction]
type = Reaction
variable = u
[]
[v_reaction]
type = Reaction
variable = v
[]
[u_force]
type = BodyForce
variable = u
[]
[v_force]
type = CoupledForce
variable = v
v = u
[]
[]
[Executioner]
type = Steady
solve_type = LINEAR
[]
[Outputs]
exodus = true
[]
test/tests/misc/check_error/dg_kernel_with_aux_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[DGKernels]
[./nope]
type = DGDiffusion
variable = v
epsilon = -1
sigma = 6
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/dgkernels/2d_diffusion_dg/dg_stateful.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./abs]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Materials]
[./stateful]
type = StatefulMaterial
initial_diffusivity = 1
boundary = 'left'
[../]
[./general]
type = GenericConstantMaterial
block = '0'
prop_names = 'dummy'
prop_values = '1'
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1e-10
[]
test/tests/mesh_modifiers/mesh_side_set/test.i
[Mesh]
type = GeneratedMesh
dim = 3
nx = 4
ny = 4
nz = 4
elem_type = TET4
[]
[MeshModifiers]
[./left_block]
type = SubdomainBoundingBox
block_id = 1
block_name = left_block
bottom_left = '0 0 0'
top_right = '0.5 1 1'
[../]
[./right_block]
type = SubdomainBoundingBox
block_id = 2
block_name = right_block
bottom_left = '0.5 0 0'
top_right = '1 1 1'
[../]
[./center_side_set]
type = SideSetsBetweenSubdomains
master_block = left_block
paired_block = right_block
new_boundary = center_side_set
depends_on = 'left_block right_block'
[../]
[./center_mesh]
type = MeshSideSet
boundaries = center_side_set
block_id = 10
block_name = center_mesh
depends_on = 'center_side_set'
[../]
[]
[Variables]
[./c_volume]
[./InitialCondition]
type = FunctionIC
function = '1-(x-0.5)^2+(y-0.5)^2+(z-0.5)^2'
[../]
[../]
[./c_plane]
block = 'center_mesh'
[../]
[]
[Kernels]
[./volume_diff]
type = Diffusion
variable = c_volume
block = 'left_block right_block'
[../]
[./volume_dt]
type = TimeDerivative
variable = c_volume
block = 'left_block right_block'
[../]
# couple the lower dimensional variable to the volume variable
[./plane_reaction]
type = Reaction
variable = c_plane
block = 'center_mesh'
[../]
[./plane_coupled]
type = CoupledForce
variable = c_plane
v = c_volume
block = 'center_mesh'
[../]
[]
[Executioner]
type = Transient
dt = 0.01
num_steps = 2
[]
[Outputs]
exodus = true
[]
test/tests/dgkernels/dg_displacement/dg_displacement.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
displacements = 'disp_x disp_y'
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[../]
[]
[AuxVariables]
[./disp_x]
[../]
[./disp_y]
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[./disp_func]
type = ParsedFunction
value = x
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./abs]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
use_displaced_mesh = true
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
nl_rel_tol = 1e-10
[]
[Outputs]
execute_on = 'timestep_end'
file_base = out
exodus = true
[]
[ICs]
[./disp_x_ic]
function = disp_func
variable = disp_x
type = FunctionIC
[../]
[]
test/tests/auxkernels/time_derivative/coupled_aux_time_derivative.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
[]
[Functions]
[./f_fn]
type = ParsedFunction
value = t*(x+y)
[../]
[./f_dot_fn]
type = ParsedFunction
value = (x+y)
[../]
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./l2_proj]
type = Reaction
variable = u
[../]
[./dck]
type = DotCouplingKernel
variable = u
v = f
[../]
[]
[AuxVariables]
[./f]
[../]
[./g]
[../]
[]
[AuxKernels]
[./f_k]
type = FunctionAux
variable = f
function = f_fn
[../]
# We do not allow coupling of time derivatives of aux vars into the aux vars
[./g_k]
type = DotCouplingAux
variable = g
v = f
[../]
[]
[Postprocessors]
[./l2_error]
type = ElementL2Error
variable = u
function = f_dot_fn
[../]
[]
[Executioner]
type = Transient
dt = 0.1
num_steps = 2
nl_abs_tol = 1.e-15
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
test/tests/variables/fe_hier/hier-2-3d.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
nx = 1
ny = 1
nz = 1
elem_type = HEX27
# This problem only has 1 element, so using DistributedMesh in parallel
# isn't really an option, and we don't care that much about DistributedMesh
# in serial.
parallel_type = replicated
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 2*y
[../]
[./bc_fnb]
type = ParsedFunction
value = -2*y
[../]
[./bc_fnl]
type = ParsedFunction
value = -2*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 2*x
[../]
[./bc_fnf]
type = ParsedFunction
value = 2*z
[../]
[./bc_fnk]
type = ParsedFunction
value = -2*z
[../]
[./forcing_fn]
type = ParsedFunction
value = -6+x*x+y*y+z*z
[../]
[./solution]
type = ParsedGradFunction
value = x*x+y*y+z*z
grad_x = 2*x
grad_y = 2*y
grad_z = 2*z
[../]
[]
[Variables]
[./u]
order = SECOND
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[./bc_front]
type = FunctionNeumannBC
variable = u
boundary = 'front'
function = bc_fnf
[../]
[./bc_back]
type = FunctionNeumannBC
variable = u
boundary = 'back'
function = bc_fnk
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/variables/fe_hier/hier-3-2d.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 5
ny = 5
elem_type = QUAD9
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 3*y*y
[../]
[./bc_fnb]
type = ParsedFunction
value = -3*y*y
[../]
[./bc_fnl]
type = ParsedFunction
value = -3*x*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 3*x*x
[../]
[./forcing_fn]
type = ParsedFunction
value = -6*x-6*y+(x*x*x)+(y*y*y)
[../]
[./solution]
type = ParsedGradFunction
value = (x*x*x)+(y*y*y)
grad_x = 3*x*x
grad_y = 3*y*y
[../]
[]
[Variables]
[./u]
order = THIRD
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/variables/fe_hermite_convergence/hermite_converge_dirichlet.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 4
ny = 4
elem_type = QUAD4
# This test will not work in parallel with DistributedMesh enabled
# due to a bug in PeriodicBCs.
parallel_type = replicated
[]
[Functions]
[./bc_fn]
type = ParsedGradFunction
value = -sin(pi*x)*sin(pi*y)
grad_x = -pi*cos(pi*x)*sin(pi*y)
grad_y = -pi*sin(pi*x)*cos(pi*y)
[../]
[./forcing_fn]
type = ParsedFunction
value = -2*pi*pi*sin(pi*x)*sin(pi*y)-sin(pi*x)*sin(pi*y)
[../]
[]
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./all]
type = FunctionPenaltyDirichletBC
variable = u
boundary = 'bottom right top left'
function = bc_fn
penalty = 1e10
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = bc_fn
[../]
[./H1error]
type = ElementH1Error
variable = u
function = bc_fn
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = bc_fn
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
# We use higher-order quadrature to ensure that the forcing function
# is integrated accurately.
[./Quadrature]
order=ELEVENTH
[../]
[]
[Adaptivity]
steps = 2
marker = uniform
[./Markers]
[./uniform]
type = UniformMarker
mark = refine
[../]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
print_mesh_changed_info = true
[]
test/tests/transfers/multiapp_high_order_variable_transfer/master_L2_Lagrange_userobject.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
parallel_type = replicated
[]
[Variables]
[power_density]
family = L2_LAGRANGE
order = FIRST
[]
[]
[AuxVariables]
[./multi_layered_average]
family = LAGRANGE
order = FIRST
[../]
[]
[UserObjects]
[./multi_layered_average]
type = LayeredAverage
variable = power_density
direction = y
num_layers = 4
[../]
[]
[AuxKernels]
[./layered_aux]
type = SpatialUserObjectAux
variable = multi_layered_average
execute_on = 'nonlinear TIMESTEP_END'
user_object = multi_layered_average
[../]
[]
[Functions]
[pwr_func]
type = ParsedFunction
value = '1e3*x*(1-x)+5e2'
[]
[]
[Kernels]
[diff]
type = Reaction
variable = power_density
[]
[coupledforce]
type = BodyForce
variable = power_density
function = pwr_func
[]
[]
[Postprocessors]
[layered_avg]
type = ElementAverageValue
block = '0'
variable = multi_layered_average
execute_on = 'initial timestep_end'
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart '
petsc_options_value = 'hypre boomeramg 100'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-12
[]
[MultiApps]
[sub]
type = FullSolveMultiApp
app_type = MooseTestApp
positions = '0 0 0'
input_files = sub_L2_Lagrange.i
execute_on = 'timestep_end'
[]
[]
[Transfers]
[p_to_sub]
type = MultiAppUserObjectTransfer
direction = to_multiapp
user_object = multi_layered_average
variable = power_density
multi_app = sub
execute_on = 'timestep_end'
[]
[]
[Outputs]
exodus = true
perf_graph = true
[]
modules/phase_field/test/tests/phase_field_crystal/PFCTrad/PFCTrad_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 50
ny = 50
xmax = 8
ymax = 8
[]
[Variables]
[./n]
[./InitialCondition]
type = RandomIC
min = -1
max = 4
[../]
[../]
[./u]
scaling = 1e2
[../]
[./v]
scaling = 1e1
[../]
[]
[Kernels]
[./ndot]
type = TimeDerivative
variable = n
[../]
[./n_bulk]
type = CHBulkPFCTrad
variable = n
[../]
[./u_term]
type = MatDiffusion
variable = n
v = u
diffusivity = C2
[../]
[./v_term]
type = MatDiffusion
variable = n
v = v
diffusivity = C4
[../]
[./u_rctn]
type = Reaction
variable = u
[../]
[./u_gradn]
type = LaplacianSplit
variable = u
c = n
[../]
[./v_rctn]
type = Reaction
variable = v
[../]
[./v_gradu]
type = LaplacianSplit
variable = v
c = u
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./PFCTrad]
type = PFCTradMaterial
order = FOURTH
[../]
[]
[Preconditioning]
active = 'SMP'
[./SMP]
type = SMP
full = true
off_diag_row = 'u n n v'
off_diag_column = 'n u v u'
[../]
[./FDP]
type = FDP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
# petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
# petsc_options_value = 'hypre boomeramg 101'
# petsc_options_iname = -pc_type
# petsc_options_value = lu
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_ksp_type -sub_pc_type -pc_asm_overlap'
petsc_options_value = 'asm 101 preonly lu 5'
l_max_its = 100
l_tol = 1e-04
nl_rel_tol = 1e-09
nl_abs_tol = 1e-11
num_steps = 2
dt = 0.1
[]
[Outputs]
exodus = true
[]
test/tests/misc/check_error/scalar_kernel_with_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[ScalarKernels]
[./nope]
type = ODETimeDerivative
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/outputs/debug/show_var_residual_norms_debug.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD9
[]
[Functions]
[./forcing_fnu]
type = ParsedFunction
value = -5.8*(x+y)+x*x*x-x+y*y*y-y
[../]
[./forcing_fnv]
type = ParsedFunction
value = -4
[../]
[./slnu]
type = ParsedGradFunction
value = x*x*x-x+y*y*y-y
grad_x = 3*x*x-1
grad_y = 3*y*y-1
[../]
[./slnv]
type = ParsedGradFunction
value = x*x+y*y
grad_x = 2*x
grad_y = 2*y
[../]
#NeumannBC functions
[./bc_fnut]
type = ParsedFunction
value = 3*y*y-1
[../]
[./bc_fnub]
type = ParsedFunction
value = -3*y*y+1
[../]
[./bc_fnul]
type = ParsedFunction
value = -3*x*x+1
[../]
[./bc_fnur]
type = ParsedFunction
value = 3*x*x-1
[../]
[]
[Variables]
[./u]
order = THIRD
family = HIERARCHIC
[../]
[./v]
order = SECOND
family = LAGRANGE
[../]
[]
[Kernels]
active = 'diff1 diff2 test1 forceu forcev react'
[./diff1]
type = Diffusion
variable = u
[../]
[./test1]
type = CoupledConvection
variable = u
velocity_vector = v
[../]
[./diff2]
type = Diffusion
variable = v
[../]
[./react]
type = Reaction
variable = u
[../]
[./forceu]
type = BodyForce
variable = u
function = forcing_fnu
[../]
[./forcev]
type = BodyForce
variable = v
function = forcing_fnv
[../]
[]
[BCs]
active = 'bc_u_tb bc_v bc_ul bc_ur bc_ut bc_ub'
[./bc_u]
type = FunctionPenaltyDirichletBC
variable = u
function = slnu
boundary = 'left right top bottom'
penalty = 1e6
[../]
[./bc_v]
type = FunctionDirichletBC
variable = v
function = slnv
boundary = 'left right top bottom'
[../]
[./bc_u_lr]
type = FunctionPenaltyDirichletBC
variable = u
function = slnu
boundary = 'left right top bottom'
penalty = 1e6
[../]
[./bc_u_tb]
type = CoupledKernelGradBC
variable = u
var2 = v
vel = '0.1 0.1'
boundary = 'top bottom left right'
[../]
[./bc_ul]
type = FunctionNeumannBC
variable = u
function = bc_fnul
boundary = 'left'
[../]
[./bc_ur]
type = FunctionNeumannBC
variable = u
function = bc_fnur
boundary = 'right'
[../]
[./bc_ut]
type = FunctionNeumannBC
variable = u
function = bc_fnut
boundary = 'top'
[../]
[./bc_ub]
type = FunctionNeumannBC
variable = u
function = bc_fnub
boundary = 'bottom'
[../]
[]
[Preconditioning]
active = ' '
[./prec]
type = SMP
full = true
[../]
[]
[Postprocessors]
active='L2u L2v'
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2u]
type = ElementL2Error
variable = u
function = slnu
[../]
[./L2v]
type = ElementL2Error
variable = v
function = slnv
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
# petsc_options = '-snes'
nl_rel_tol = 1e-15
nl_abs_tol = 1e-13
[]
[Outputs]
execute_on = 'timestep_end'
[]
[Debug]
show_var_residual_norms = true
[]
test/tests/variables/fe_hier/hier-1-3d.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
nx = 5
ny = 5
elem_type = HEX8
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 1
[../]
[./bc_fnb]
type = ParsedFunction
value = -1
[../]
[./bc_fnl]
type = ParsedFunction
value = -1
[../]
[./bc_fnr]
type = ParsedFunction
value = 1
[../]
[./bc_fnf]
type = ParsedFunction
value = 1
[../]
[./bc_fnk]
type = ParsedFunction
value = -1
[../]
[./forcing_fn]
type = ParsedFunction
value = x+y+z
[../]
[./solution]
type = ParsedGradFunction
value = x+y+z
grad_x = 1
grad_y = 1
grad_z = 1
[../]
[]
[Variables]
[./u]
order = FIRST
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[./bc_front]
type = FunctionNeumannBC
variable = u
boundary = 'front'
function = bc_fnf
[../]
[./bc_back]
type = FunctionNeumannBC
variable = u
boundary = 'back'
function = bc_fnk
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
modules/phase_field/test/tests/mobility_derivative/coupledmatdiffusion.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 15
ny = 15
xmax = 15.0
ymax = 15.0
elem_type = QUAD4
[]
[Variables]
[./c]
[./InitialCondition]
type = CrossIC
x1 = 0.0
x2 = 30.0
y1 = 0.0
y2 = 30.0
[../]
[../]
[./d]
[./InitialCondition]
type = SmoothCircleIC
x1 = 15
y1 = 15
radius = 8
int_width = 3
invalue = 2
outvalue = 0
[../]
[../]
[./u]
[../]
[./w]
[../]
[]
[Kernels]
[./ctime]
type = TimeDerivative
variable = c
[../]
[./umat]
type = MatReaction
variable = c
v = u
mob_name = 1
[../]
[./urxn]
type = Reaction
variable = u
[../]
[./cres]
type = MatDiffusion
variable = u
diffusivity = Dc
args = d
v = c
[../]
[./dtime]
type = TimeDerivative
variable = d
[../]
[./wmat]
type = MatReaction
variable = d
v = w
mob_name = 1
[../]
[./wrxn]
type = Reaction
variable = w
[../]
[./dres]
type = MatDiffusion
variable = w
diffusivity = Dd
args = c
v = d
[../]
[]
[Materials]
[./Dc]
type = DerivativeParsedMaterial
f_name = Dc
function = '0.01+c^2+d'
args = 'c d'
derivative_order = 1
[../]
[./Dd]
type = DerivativeParsedMaterial
f_name = Dd
function = 'd^2+c+1.5'
args = 'c d'
derivative_order = 1
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
scheme = 'BDF2'
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -pc_asm_overlap'
petsc_options_value = 'asm 31 lu 1'
dt = 1
num_steps = 2
[]
[Outputs]
exodus = true
[]
modules/phase_field/test/tests/phase_field_crystal/PFCEnergyDensity/auxkernel.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 15
ny = 15
nz = 0
xmax = 6
ymax = 6
zmax = 0
[]
[Variables]
[./n]
[./InitialCondition]
type = RandomIC
min = 0.0
max = 0.1
[../]
[../]
[./u]
scaling = 1e2
[../]
[./v]
scaling = 1e1
[../]
[]
[AuxVariables]
[./ed]
order = CONSTANT
family = MONOMIAL
[../]
[./edrff0]
order = CONSTANT
family = MONOMIAL
[../]
[./edrff1]
order = CONSTANT
family = MONOMIAL
[../]
[./edrff2]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
[./ndot]
type = TimeDerivative
variable = n
[../]
[./n_bulk]
type = CHBulkPFCTrad
variable = n
[../]
[./u_term]
type = MatDiffusion
variable = n
v = u
diffusivity = C2
[../]
[./v_term]
type = MatDiffusion
variable = n
v = v
diffusivity = C4
[../]
[./u_rctn]
type = Reaction
variable = u
[../]
[./u_gradn]
type = LaplacianSplit
variable = u
c = n
[../]
[./v_rctn]
type = Reaction
variable = v
[../]
[./v_gradu]
type = LaplacianSplit
variable = v
c = u
[../]
[]
[AuxKernels]
[./Energy_n]
type = PFCEnergyDensity
execute_on = 'initial timestep_end'
variable = ed
v = 'n u v'
[../]
[./Energy_rff0]
type = PFCRFFEnergyDensity
execute_on = 'initial timestep_end'
variable = edrff0
log_approach = tolerance
v = 'n u v'
[../]
[./Energy_rff1]
type = PFCRFFEnergyDensity
execute_on = 'initial timestep_end'
variable = edrff1
log_approach = cancelation
v = 'n u v'
[../]
[./Energy_rff2]
type = PFCRFFEnergyDensity
execute_on = 'initial timestep_end'
variable = edrff2
log_approach = expansion
v = 'n u v'
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./PFCTrad]
type = PFCTradMaterial
order = FOURTH
[../]
[]
[Postprocessors]
[./Total_free_energy]
type = PFCElementEnergyIntegral
variable = ed
execute_on = 'initial timestep_end'
[../]
[]
[Preconditioning]
active = 'SMP'
[./SMP]
type = SMP
full = true
off_diag_row = 'u n n v'
off_diag_column = 'n u v u'
[../]
[./FDP]
type = FDP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
# petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart'
# petsc_options_value = 'hypre boomeramg 101'
# petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_ksp_type -sub_pc_type -pc_asm_overlap'
# petsc_options_value = 'asm 101 preonly lu 1'
petsc_options_iname = '-pc_type '
petsc_options_value = 'lu '
l_max_its = 100
l_tol = 1e-04
nl_rel_tol = 1e-09
nl_abs_tol = 1e-11
num_steps = 1
dt = 0.1
[]
[Outputs]
exodus = true
csv = true
[]
test/tests/tag/2d_diffusion_dg_tag.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 4
ny = 4
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[AuxVariables]
[./tag_variable1]
order = FIRST
family = MONOMIAL
[../]
[./tag_variable2]
order = FIRST
family = MONOMIAL
[../]
[]
[AuxKernels]
[./TagVectorAux1]
type = TagVectorAux
variable = tag_variable1
v = u
vector_tag = vec_tag2
execute_on = timestep_end
[../]
[./TagVectorAux2]
type = TagMatrixAux
variable = tag_variable2
v = u
matrix_tag = mat_tag2
execute_on = timestep_end
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
extra_matrix_tags = 'mat_tag1 mat_tag2'
extra_vector_tags = 'vec_tag1 vec_tag2'
[../]
[./abs]
type = Reaction
variable = u
extra_matrix_tags = 'mat_tag1 mat_tag2'
extra_vector_tags = 'vec_tag1 vec_tag2'
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
extra_matrix_tags = 'mat_tag1 mat_tag2'
extra_vector_tags = 'vec_tag1'
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
extra_matrix_tags = 'mat_tag1 mat_tag2'
extra_vector_tags = 'vec_tag1 vec_tag2'
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
extra_matrix_tags = 'mat_tag1 mat_tag2'
extra_vector_tags = 'vec_tag1 vec_tag2'
[../]
[]
[Problem]
type = TagTestProblem
test_tag_vectors = 'nontime residual vec_tag1 vec_tag2'
test_tag_matrices = 'mat_tag1 mat_tag2'
extra_tag_matrices = 'mat_tag1 mat_tag2'
extra_tag_vectors = 'vec_tag1 vec_tag2'
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
nl_rel_tol = 1e-10
[]
[Postprocessors]
[./h]
type = AverageElementSize
[../]
[./dofs]
type = NumDOFs
[../]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Outputs]
exodus = true
[]
test/tests/outputs/debug/show_var_residual_norms.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD9
[]
[Functions]
[./forcing_fnu]
type = ParsedFunction
value = -5.8*(x+y)+x*x*x-x+y*y*y-y
[../]
[./forcing_fnv]
type = ParsedFunction
value = -4
[../]
[./slnu]
type = ParsedGradFunction
value = x*x*x-x+y*y*y-y
grad_x = 3*x*x-1
grad_y = 3*y*y-1
[../]
[./slnv]
type = ParsedGradFunction
value = x*x+y*y
grad_x = 2*x
grad_y = 2*y
[../]
#NeumannBC functions
[./bc_fnut]
type = ParsedFunction
value = 3*y*y-1
[../]
[./bc_fnub]
type = ParsedFunction
value = -3*y*y+1
[../]
[./bc_fnul]
type = ParsedFunction
value = -3*x*x+1
[../]
[./bc_fnur]
type = ParsedFunction
value = 3*x*x-1
[../]
[]
[Variables]
[./u]
order = THIRD
family = HIERARCHIC
[../]
[./v]
order = SECOND
family = LAGRANGE
[../]
[]
[Kernels]
active = 'diff1 diff2 test1 forceu forcev react'
[./diff1]
type = Diffusion
variable = u
[../]
[./test1]
type = CoupledConvection
variable = u
velocity_vector = v
[../]
[./diff2]
type = Diffusion
variable = v
[../]
[./react]
type = Reaction
variable = u
[../]
[./forceu]
type = BodyForce
variable = u
function = forcing_fnu
[../]
[./forcev]
type = BodyForce
variable = v
function = forcing_fnv
[../]
[]
[BCs]
active = 'bc_u_tb bc_v bc_ul bc_ur bc_ut bc_ub'
[./bc_u]
type = FunctionPenaltyDirichletBC
variable = u
function = slnu
boundary = 'left right top bottom'
penalty = 1e6
[../]
[./bc_v]
type = FunctionDirichletBC
variable = v
function = slnv
boundary = 'left right top bottom'
[../]
[./bc_u_lr]
type = FunctionPenaltyDirichletBC
variable = u
function = slnu
boundary = 'left right top bottom'
penalty = 1e6
[../]
[./bc_u_tb]
type = CoupledKernelGradBC
variable = u
var2 = v
vel = '0.1 0.1'
boundary = 'top bottom left right'
[../]
[./bc_ul]
type = FunctionNeumannBC
variable = u
function = bc_fnul
boundary = 'left'
[../]
[./bc_ur]
type = FunctionNeumannBC
variable = u
function = bc_fnur
boundary = 'right'
[../]
[./bc_ut]
type = FunctionNeumannBC
variable = u
function = bc_fnut
boundary = 'top'
[../]
[./bc_ub]
type = FunctionNeumannBC
variable = u
function = bc_fnub
boundary = 'bottom'
[../]
[]
[Preconditioning]
active = ' '
[./prec]
type = SMP
full = true
[../]
[]
[Postprocessors]
active='L2u L2v'
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2u]
type = ElementL2Error
variable = u
function = slnu
[../]
[./L2v]
type = ElementL2Error
variable = v
function = slnv
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
# petsc_options = '-snes'
nl_rel_tol = 1e-15
nl_abs_tol = 1e-13
[]
[Outputs]
execute_on = 'timestep_end'
[./debug] # This is a test, use the [Debug] block to enable this
type = VariableResidualNormsDebugOutput
[../]
[]
test/tests/variables/fe_monomial_const/monomial-const-3d.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
nx = 21
ny = 21
nz = 21
elem_type = HEX8
[]
[Functions]
[./bc_fn]
type=ParsedFunction
value=0
[../]
[./bc_fnt]
type = ParsedFunction
value = 0
[../]
[./bc_fnb]
type = ParsedFunction
value = 0
[../]
[./bc_fnl]
type = ParsedFunction
value = 0
[../]
[./bc_fnr]
type = ParsedFunction
value = 0
[../]
[./forcing_fn]
# type = ParsedFunction
# value = 0
type = MTPiecewiseConst3D
[../]
[./solution]
type = MTPiecewiseConst3D
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
# Note: MOOSE's DirichletBCs do not work properly with shape functions that do not
# have DOFs at the element edges. This test works because the solution
# has been designed to be zero at the boundary which is satisfied by the IC
# Ticket #1352
active = ''
[./bc_all]
type=FunctionDirichletBC
variable = u
boundary = 'top bottom left right'
function = bc_fn
[../]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1.e-9
[./Adaptivity]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/transfers/multiapp_high_order_variable_transfer/master_L2_Lagrange.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
[]
[Variables]
[power_density]
family = L2_LAGRANGE
order = FIRST
[]
[]
[Functions]
[pwr_func]
type = ParsedFunction
value = '1e3*x*(1-x)+5e2'
[]
[]
[Kernels]
[diff]
type = Reaction
variable = power_density
[]
[coupledforce]
type = BodyForce
variable = power_density
function = pwr_func
[]
[]
[Postprocessors]
[pwr_avg]
type = ElementAverageValue
block = '0'
variable = power_density
execute_on = 'initial timestep_end'
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart '
petsc_options_value = 'hypre boomeramg 100'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-12
[]
[MultiApps]
[sub]
type = FullSolveMultiApp
app_type = MooseTestApp
positions = '0 0 0'
input_files = sub_L2_Lagrange.i
execute_on = 'timestep_end'
[]
[]
[Transfers]
[p_to_sub]
type = MultiAppMeshFunctionTransfer
direction = to_multiapp
source_variable = power_density
variable = power_density
multi_app = sub
execute_on = 'timestep_end'
[]
[]
[Outputs]
exodus = true
perf_graph = true
[]
test/tests/interfacekernels/adaptivity/adaptivity.i
# This input file is used for two tests:
# 1) Check that InterfaceKernels work with mesh adaptivity
# 2) Error out when InterfaceKernels are used with adaptivity
# and stateful material prpoerties
[Mesh]
parallel_type = 'replicated'
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[./subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '0.5 0 0'
top_right = '1 1 0'
block_id = 1
[../]
[./interface]
type = SideSetsBetweenSubdomainsGenerator
input = subdomain1
master_block = '0'
paired_block = '1'
new_boundary = 'master0_interface'
[../]
[./break_boundary]
input = interface
type = BreakBoundaryOnSubdomainGenerator
[../]
[]
[Variables]
[./u]
[./InitialCondition]
type = ConstantIC
value = 1
[../]
block = 0
[../]
[./u_neighbor]
[./InitialCondition]
type = ConstantIC
value = 1
[../]
block = 1
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = (x*x*x)-6.0*x
[../]
[./bc_fn]
type = ParsedFunction
value = (x*x*x)
[../]
[]
[Kernels]
[./diff]
type = MatDiffusionTest
variable = u
prop_name = diffusivity
block = 0
[../]
[./abs]
type = Reaction
variable = u
block = 0
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
block = 0
[../]
[./diffn]
type = MatDiffusionTest
variable = u_neighbor
prop_name = diffusivity
block = 1
[../]
[./absn]
type = Reaction
variable = u_neighbor
block = 1
[../]
[./forcingn]
type = BodyForce
variable = u_neighbor
function = forcing_fn
block = 1
[../]
[]
[InterfaceKernels]
[./flux_match]
type = PenaltyInterfaceDiffusion
variable = u
neighbor_var = u_neighbor
boundary = master0_interface
penalty = 1e6
[../]
[]
[BCs]
[./u]
type = FunctionDirichletBC
variable = u
boundary = 'left'
function = bc_fn
[../]
[./u_neighbor]
type = FunctionDirichletBC
variable = u_neighbor
boundary = 'right'
function = bc_fn
[../]
[]
[Materials]
active = 'constant'
[./stateful]
type = StatefulTest
prop_names = 'diffusivity'
prop_values = '1'
block = '0 1'
[../]
[./constant]
type = GenericConstantMaterial
prop_names = 'diffusivity'
prop_values = '1'
block = '0 1'
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Adaptivity]
marker = 'marker'
steps = 1
[./Markers]
[./marker]
type = BoxMarker
bottom_left = '0 0 0'
top_right = '1 1 0'
inside = refine
outside = coarsen
[../]
[../]
[]
[Outputs]
exodus = true
[]
test/tests/misc/check_error/bc_with_aux_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = v
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/variables/previous_newton_iteration/test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 2
ny = 2
elem_type = QUAD9
[]
[Functions]
[./v_fn]
type = ParsedFunction
value = -4+(x*x+y*y)+1
[../]
[./left_u_bc_fn]
type = ParsedFunction
value = -2*x
[../]
[./top_u_bc_fn]
type = ParsedFunction
value = 2*y
[../]
[./right_u_bc_fn]
type = ParsedFunction
value = 2*x
[../]
[./bottom_u_bc_fn]
type = ParsedFunction
value = -2*y
[../]
[]
[AuxVariables]
[./a]
order = SECOND
[../]
[./v]
order = SECOND
[../]
[]
[AuxKernels]
[./ak_a]
type = QuotientAux
variable = a
numerator = v
denominator = u
[../]
[./ak_v]
type = FunctionAux
variable = v
function = v_fn
[../]
[]
[Variables]
[./u]
order = SECOND
[../]
[]
[ICs]
[./u_ic]
type = ConstantIC
variable = u
value = 1
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./react]
type = Reaction
variable = u
[../]
[./cv_u]
type = CoupledForceLagged
variable = u
v = v
[../]
[]
[BCs]
[./u_bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = left_u_bc_fn
[../]
[./u_bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = top_u_bc_fn
[../]
[./u_bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = right_u_bc_fn
[../]
[./u_bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bottom_u_bc_fn
[../]
[]
[Preconditioning]
[./pc]
type = SMP
full = true
solve_type = PJFNK
[../]
[]
[Executioner]
type = Steady
# to get multiple NL iterations
l_tol = 1e-3
nl_rel_tol = 1e-10
[]
[Outputs]
[./out]
type = Exodus
execute_on = 'nonlinear'
[../]
[]
test/tests/variables/fe_hier/hier-1-2d.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 5
ny = 5
elem_type = QUAD9
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 1
[../]
[./bc_fnb]
type = ParsedFunction
value = -1
[../]
[./bc_fnl]
type = ParsedFunction
value = -1
[../]
[./bc_fnr]
type = ParsedFunction
value = 1
[../]
[./forcing_fn]
type = ParsedFunction
value = x+y
[../]
[./solution]
type = ParsedGradFunction
value = x+y
grad_x = 1
grad_y = 1
[../]
[]
[Variables]
[./u]
order = FIRST
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/misc/check_error/missing_req_par_mesh_block_test.i
#
# Tests elemental PPS running on multiple block
#
[Mesh]
type = StripeMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 3
ny = 3
elem_type = QUAD4
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = x
[../]
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Kernels]
[./uv]
type = Reaction
variable = u
[../]
[./fv]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[Postprocessors]
[./avg_1_2]
type = ElementAverageValue
variable = u
block = '0 1'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
test/tests/transfers/multiapp_high_order_variable_transfer/master_L2_Lagrange_conservative.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
[]
[Variables]
[power_density]
family = L2_LAGRANGE
order = FIRST
[]
[]
[Functions]
[pwr_func]
type = ParsedFunction
value = '1e3*x*(1-x)+5e2'
[]
[]
[Kernels]
[diff]
type = Reaction
variable = power_density
[]
[coupledforce]
type = BodyForce
variable = power_density
function = pwr_func
[]
[]
[Postprocessors]
[pwr_avg]
type = ElementAverageValue
block = '0'
variable = power_density
execute_on = 'initial timestep_end'
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart '
petsc_options_value = 'hypre boomeramg 100'
nl_abs_tol = 1e-8
nl_rel_tol = 1e-12
[]
[Postprocessors]
[./from_postprocessor]
type = ElementIntegralVariablePostprocessor
variable = power_density
execute_on = 'Nonlinear TIMESTEP_END'
[../]
[]
[MultiApps]
[sub]
type = FullSolveMultiApp
app_type = MooseTestApp
positions = '0 0 0'
input_files = sub_L2_Lagrange_conservative.i
execute_on = 'timestep_end'
[]
[]
[Transfers]
[p_to_sub]
type = MultiAppMeshFunctionTransfer
direction = to_multiapp
source_variable = power_density
variable = power_density
multi_app = sub
execute_on = 'timestep_end'
from_postprocessors_to_be_preserved = 'from_postprocessor'
to_postprocessors_to_be_preserved = 'pwr_density'
[]
[]
[Outputs]
exodus = true
perf_graph = true
[]
test/tests/variables/fe_hier/hier-3-1d.i
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 5
elem_type = EDGE3
[]
[Functions]
[./bc_fnl]
type = ParsedFunction
value = -3*x*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 3*x*x
[../]
[./forcing_fn]
type = ParsedFunction
value = -6*x+(x*x*x)
[../]
[./solution]
type = ParsedGradFunction
value = x*x*x
grad_x = 3*x*x
[../]
[]
[Variables]
[./u]
order = THIRD
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/tag/2d_diffusion_vector_tag_test.i
[Mesh]
file = square.e
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
initial_condition = 1.0
[../]
[]
[AuxVariables]
[./tag_variable1]
order = FIRST
family = LAGRANGE
[../]
[./tag_variable2]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./reaction1]
type = Reaction
variable = u
extra_vector_tags = 'vec_tag1 vec_tag2'
[../]
[./reaction2]
type = Reaction
variable = u
extra_vector_tags = 'vec_tag1 vec_tag2'
[../]
[./reaction3]
type = Reaction
variable = u
[../]
[./reaction4]
type = Reaction
variable = u
[../]
[]
[AuxKernels]
[./TagVectorAux1]
type = TagVectorAux
variable = tag_variable1
v = u
vector_tag = vec_tag1
execute_on = timestep_end
[../]
[./TagVectorAux2]
type = TagVectorAux
variable = tag_variable2
v = u
vector_tag = vec_tag2
execute_on = timestep_end
[../]
[]
[BCs]
active = 'left right'
[./left]
type = DirichletBC
variable = u
preset = false
boundary = 1
value = 10
extra_vector_tags = vec_tag1
[../]
[./right]
type = DirichletBC
variable = u
preset = false
boundary = 2
value = 100
extra_vector_tags = vec_tag2
[../]
[./right1]
type = DirichletBC
variable = u
preset = false
boundary = 2
value = 100
[../]
[./right2]
type = DirichletBC
variable = u
preset = false
boundary = 2
value = 100
[../]
[]
[Problem]
type = TagTestProblem
extra_tag_vectors = 'vec_tag1 vec_tag2'
test_tag_vectors = 'vec_tag1 vec_tag2'
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = vector_tag_test_out
exodus = true
[]
test/tests/bcs/penalty_dirichlet_bc/function_penalty_dirichlet_bc_test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD9
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = -4+x*x+y*y
[../]
[./solution]
type = ParsedGradFunction
value = x*x+y*y
grad_x = 2*x
grad_y = 2*y
[../]
[]
[Variables]
[./u]
order = SECOND
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
active = 'bc_all'
[./bc_all]
type = FunctionPenaltyDirichletBC
variable = u
function = solution
boundary = 'top left right bottom'
penalty = 1e6
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1e-14
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/variables/fe_hermite_convergence/hermite_converge_periodic.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 4
ny = 4
elem_type = QUAD4
# This test will not work in parallel with DistributedMesh enabled
# due to a bug in PeriodicBCs.
parallel_type = replicated
[]
[Functions]
[./bc_fn]
type = ParsedGradFunction
value = -sin(pi*x)*sin(pi*y)
grad_x = -pi*cos(pi*x)*sin(pi*y)
grad_y = -pi*sin(pi*x)*cos(pi*y)
[../]
[./bc_fnt]
type = ParsedFunction
value = -pi*sin(pi*x)*cos(pi*y)
[../]
[./bc_fnb]
type = ParsedFunction
value = pi*sin(pi*x)*cos(pi*y)
[../]
[./forcing_fn]
type = ParsedFunction
value = -2*pi*pi*sin(pi*x)*sin(pi*y)-sin(pi*x)*sin(pi*y)
[../]
[]
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./Periodic]
[./all]
variable = u
auto_direction= 'x y'
[../]
[../]
[./bc_top]
type=FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type=FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = bc_fn
[../]
[./H1error]
type = ElementH1Error
variable = u
function = bc_fn
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = bc_fn
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
# We use higher-order quadrature to ensure that the forcing function
# is integrated accurately.
[./Quadrature]
order=ELEVENTH
[../]
[]
[Adaptivity]
steps = 2
marker = uniform
[./Markers]
[./uniform]
type = UniformMarker
mark = refine
[../]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
print_mesh_changed_info = true
[]
test/tests/problems/eigen_problem/ne_coupled_picard_subT_sub.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 10
elem_type = QUAD4
nx = 8
ny = 8
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./T]
order = FIRST
family = LAGRANGE
[../]
[./power]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./diff]
type = DiffMKernel
variable = u
mat_prop = diffusion
offset = 0.0
[../]
[./rhs]
type = Reaction
variable = u
extra_vector_tags = 'eigen'
[../]
[]
[AuxKernels]
[./power_ak]
type = NormalizationAux
variable = power
source_variable = u
normalization = unorm
normal_factor = 10
execute_on = timestep_end
[../]
[]
[BCs]
[./homogeneous]
type = DirichletBC
variable = u
boundary = '0 1 2 3'
value = 0
[../]
[./eigenU]
type = EigenDirichletBC
variable = u
boundary = '0 1 2 3'
[../]
[]
[Materials]
[./dc]
type = VarCouplingMaterial
var = T
block = 0
base = 1.0
coef = 1.0
[../]
[]
[Executioner]
type = Eigenvalue
solve_type = MF_MONOLITH_NEWTON
eigen_problem_type = GEN_NON_HERMITIAN
[]
[Postprocessors]
[./power]
type = ElementIntegralVariablePostprocessor
variable = power
execute_on = timestep_end
[../]
[./unorm]
type = ElementIntegralVariablePostprocessor
variable = u
execute_on = linear
[../]
[]
[VectorPostprocessors]
[./eigenvalues]
type = Eigenvalues
execute_on = 'timestep_end'
[../]
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
test/tests/variables/fe_monomial_const/monomial-const-1d.i
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 100
elem_type = EDGE3
[]
[Functions]
[./bc_fn]
type=ParsedFunction
value=0
[../]
[./forcing_fn]
type = MTPiecewiseConst1D
[../]
[./solution]
type = MTPiecewiseConst1D
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
# Note: MOOSE's DirichletBCs do not work properly with shape functions that do not
# have DOFs at the element edges. This test works because the solution
# has been designed to be zero at the boundary which is satisfied by the IC
# Ticket #1352
active = ''
[./bc_all]
type=FunctionDirichletBC
variable = u
boundary = 'left right'
function = bc_fn
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1.e-9
[./Adaptivity]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/variables/fe_hermite/hermite-3-3d.i
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
nx = 1
ny = 1
nz = 1
elem_type = HEX27
# This problem only has 1 element, so using DistributedMesh in parallel
# isn't really an option, and we don't care that much about DistributedMesh
# in serial.
parallel_type = replicated
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 3*y*y
[../]
[./bc_fnb]
type = ParsedFunction
value = -3*y*y
[../]
[./bc_fnl]
type = ParsedFunction
value = -3*x*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 3*x*x
[../]
[./bc_fnk]
type = ParsedFunction
value = -3*z*z
[../]
[./bc_fnf]
type = ParsedFunction
value = 3*z*z
[../]
[./forcing_fn]
type = ParsedFunction
value = -6*x-6*y-6*z+(x*x*x)+(y*y*y)+(z*z*z)
[../]
[./solution]
type = ParsedGradFunction
value = (x*x*x)+(y*y*y)+(z*z*z)
grad_x = 3*x*x
grad_y = 3*y*y
grad_z = 3*z*z
[../]
[]
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[./bc_front]
type = FunctionNeumannBC
variable = u
boundary = 'front'
function = bc_fnf
[../]
[./bc_back]
type = FunctionNeumannBC
variable = u
boundary = 'back'
function = bc_fnk
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/postprocessors/side_pps/side_pps_multi_bnd_test.i
#
# Tests elemental PPS running on multiple blocks
#
[Mesh]
type = StripeMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 3
ny = 3
elem_type = QUAD4
stripes = 3
# StripeMesh currently only works correctly with ReplicatedMesh.
parallel_type = replicated
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = x*(y+1)
[../]
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Kernels]
[./uv]
type = Reaction
variable = u
[../]
[./fv]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[Postprocessors]
[./int_0_1]
type = SideIntegralVariablePostprocessor
variable = u
boundary = '0 1'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
modules/phase_field/test/tests/SimpleACInterface/SimpleCoupledACInterface.i
#
# Test the coupled Allen-Cahn Bulk kernel
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
nz = 0
xmin = 0
xmax = 50
ymin = 0
ymax = 50
zmin = 0
zmax = 50
elem_type = QUAD4
uniform_refine = 1
[]
[Variables]
[./w]
[../]
[./eta]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = SmoothCircleIC
x1 = 25.0
y1 = 25.0
radius = 6.0
invalue = 1.0
outvalue = 0.0
int_width = 5.0
[../]
[../]
[]
[Kernels]
[./detadt]
type = TimeDerivative
variable = eta
[../]
[./ACBulk]
type = AllenCahn
variable = eta
f_name = F
[../]
[./CoupledBulk]
type = MatReaction
variable = eta
v = w
[../]
[./W]
type = Reaction
variable = w
[../]
[./CoupledACInterface]
type = SimpleCoupledACInterface
variable = w
v = eta
kappa_name = 1
[../]
[]
[Materials]
[./consts]
type = GenericConstantMaterial
prop_names = 'L'
prop_values = '1'
[../]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'eta'
function = 'eta^2 * (1-eta)^2'
derivative_order = 2
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'PJFNK'
l_max_its = 15
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-11
start_time = 0.0
num_steps = 2
dt = 2
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
hide = w
exodus = true
[]
test/tests/postprocessors/element_average_value/elem_pps_multi_block_test.i
#
# Tests elemental PPS running on multiple block
#
[Mesh]
type = StripeMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 3
ny = 3
elem_type = QUAD4
stripes = 3
# StripeMesh currently only works correctly with ReplicatedMesh.
parallel_type = replicated
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = x
[../]
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
[../]
[]
[Kernels]
[./uv]
type = Reaction
variable = u
[../]
[./fv]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[Postprocessors]
[./avg_1_2]
type = ElementAverageValue
variable = u
block = '0 1'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
execute_on = 'timestep_end'
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/misc/check_error/scalar_aux_kernel_with_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[AuxScalarKernels]
[./nope]
type = ConstantScalarAux
variable = u
value = 11
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/time_integrators/actually_explicit_euler_verification/ee-1d-quadratic-neumann.i
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 10
elem_type = EDGE3
[]
[Functions]
[./ic]
type = ParsedFunction
value = 0
[../]
[./forcing_fn]
type = ParsedFunction
value = x*x-2*t+t*x*x
[../]
[./exact_fn]
type = ParsedFunction
value = t*x*x
[../]
[./left_bc_fn]
type = ParsedFunction
value = -t*2*x
[../]
[./right_bc_fn]
type = ParsedFunction
value = t*2*x
[../]
[]
[Variables]
[./u]
order = SECOND
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = ic
[../]
[../]
[]
[Kernels]
[./td]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./abs]
type = Reaction
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./left]
type = FunctionNeumannBC
variable = u
boundary = '0'
function = left_bc_fn
[../]
[./right]
type = FunctionNeumannBC
variable = u
boundary = '1'
function = right_bc_fn
[../]
[]
[Postprocessors]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Executioner]
type = Transient
l_tol = 1e-12
start_time = 0.0
num_steps = 10
dt = 0.001
[./TimeIntegrator]
type = ActuallyExplicitEuler
[../]
[]
[Outputs]
exodus = true
[./console]
type = Console
max_rows = 10
[../]
[]
test/tests/misc/check_error/dirac_kernel_with_aux_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[DiracKernels]
[./nope]
type = CachingPointSource
variable = v
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/multiapps/grid-sequencing/fine.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 40
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[time]
type = TimeDerivative
variable = u
[]
[./diff]
type = Diffusion
variable = u
[../]
[rxn]
type = Reaction
variable = u
[]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 2
dt = 1
solve_type = 'PJFNK'
petsc_options = '-snes_monitor_solution'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
[MultiApps]
[./coarse]
type = TransientMultiApp
app_type = MooseTestApp
execute_on = timestep_begin
positions = '0 0 0'
input_files = coarse.i
[../]
[]
[Transfers]
[./mesh_function_begin]
type = MultiAppMeshFunctionTransfer
direction = from_multiapp
multi_app = coarse
source_variable = u
variable = u
execute_on = timestep_begin
[../]
[]
test/tests/problems/eigen_problem/dg_krylovschur.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 10
ny = 10
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
sigma = 6
epsilon = -1
[]
[]
[Kernels]
[./rhs]
type = Reaction
variable = u
extra_vector_tags = 'eigen'
[../]
[]
[Executioner]
type = Eigenvalue
solve_type = KRYLOVSCHUR
eigen_problem_type = HERMITIAN
which_eigen_pairs = LARGEST_MAGNITUDE
[]
[VectorPostprocessors]
[./eigenvalues]
type = Eigenvalues
execute_on = 'timestep_end'
[../]
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
modules/phase_field/test/tests/phase_field_crystal/PFCTrad/pfct_newton_split1_asm1_10.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 50
ny = 50
xmax = 8
ymax = 8
[]
[Variables]
[./n]
[./InitialCondition]
type = RandomIC
min = -1
max = 4
[../]
[../]
[./u]
scaling = 1e2
[../]
[./v]
scaling = 1e1
[../]
[]
[Kernels]
[./ndot]
type = TimeDerivative
variable = n
[../]
[./n_bulk]
type = CHBulkPFCTrad
variable = n
[../]
[./u_term]
type = MatDiffusion
variable = n
v = u
diffusivity = C2
[../]
[./v_term]
type = MatDiffusion
variable = n
v = v
diffusivity = C4
[../]
[./u_rctn]
type = Reaction
variable = u
[../]
[./u_gradn]
type = LaplacianSplit
variable = u
c = n
[../]
[./v_rctn]
type = Reaction
variable = v
[../]
[./v_gradu]
type = LaplacianSplit
variable = v
c = u
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./PFCTrad]
type = PFCTradMaterial
order = 4
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
l_max_its = 100
l_tol = 1e-04
nl_rel_tol = 1e-09
nl_abs_tol = 1e-11
splitting = 'nuv'
petsc_options = '-snes_view'
num_steps = 2
dt = 0.1
[]
[Splits]
[./nuv]
splitting = 'v nu'
splitting_type = schur
schur_type = full
schur_pre = Sp
#petsc_options = '-dm_view'
[../]
[./nu]
vars = 'n u'
petsc_options = '-ksp_monitor'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_asm_nblocks -pc_asm_overlap -sub_pc_type'
petsc_options_value = ' 101 asm 10 1 lu'
[../]
[./v]
vars = 'v'
#petsc_options = '-ksp_monitor'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_ksp_type -sub_pc_type -pc_asm_overlap'
petsc_options_value = 'asm 101 preonly lu 0'
#full = true
[../]
[]
[Outputs]
exodus = true
[]
modules/phase_field/test/tests/phase_field_crystal/PFCTrad/pfct_newton_split1_asm5.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 50
ny = 50
xmax = 8
ymax = 8
[]
[Variables]
[./n]
[./InitialCondition]
type = RandomIC
min = -1
max = 4
[../]
[../]
[./u]
scaling = 1e2
[../]
[./v]
scaling = 1e1
[../]
[]
[Kernels]
[./ndot]
type = TimeDerivative
variable = n
[../]
[./n_bulk]
type = CHBulkPFCTrad
variable = n
[../]
[./u_term]
type = MatDiffusion
variable = n
v = u
diffusivity = C2
[../]
[./v_term]
type = MatDiffusion
variable = n
v = v
diffusivity = C4
[../]
[./u_rctn]
type = Reaction
variable = u
[../]
[./u_gradn]
type = LaplacianSplit
variable = u
c = n
[../]
[./v_rctn]
type = Reaction
variable = v
[../]
[./v_gradu]
type = LaplacianSplit
variable = v
c = u
[../]
[]
[BCs]
[./Periodic]
[./all]
auto_direction = 'x y'
[../]
[../]
[]
[Materials]
[./PFCTrad]
type = PFCTradMaterial
order = 4
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
l_max_its = 100
l_tol = 1e-04
nl_rel_tol = 1e-09
nl_abs_tol = 1e-11
splitting = 'nuv'
petsc_options = '-snes_view'
num_steps = 2
dt = 0.1
[]
[Splits]
[./nuv]
splitting = 'v nu'
splitting_type = schur
schur_type = full
schur_pre = Sp
#petsc_options = '-dm_view'
[../]
[./nu]
vars = 'n u'
petsc_options = '-ksp_monitor'
petsc_options_iname = '-ksp_gmres_restart -pc_type -pc_asm_overlap -sub_pc_type'
petsc_options_value = ' 101 asm 5 lu'
[../]
[./v]
vars = 'v'
#petsc_options = '-ksp_monitor'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_ksp_type -sub_pc_type -pc_asm_overlap'
petsc_options_value = 'asm 101 preonly lu 0'
#full = true
[../]
[]
[Outputs]
execute_on = 'initial timestep_end linear'
exodus = true
[]
test/tests/variables/fe_hier/hier-2-2d.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 5
ny = 5
elem_type = QUAD9
[]
[Functions]
[./bc_fnt]
type = ParsedFunction
value = 2*y
[../]
[./bc_fnb]
type = ParsedFunction
value = -2*y
[../]
[./bc_fnl]
type = ParsedFunction
value = -2*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 2*x
[../]
[./forcing_fn]
type = ParsedFunction
value = -4+x*x+y*y
[../]
[./solution]
type = ParsedGradFunction
value = x*x+y*y
grad_x = 2*x
grad_y = 2*y
[../]
[]
[Variables]
[./u]
order = SECOND
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/variables/fe_monomial_const/monomial-const-2d.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 100
ny = 100
elem_type = QUAD4
[]
[Functions]
[./bc_fn]
type=ParsedFunction
value=0
[../]
[./bc_fnt]
type = ParsedFunction
value = 0
[../]
[./bc_fnb]
type = ParsedFunction
value = 0
[../]
[./bc_fnl]
type = ParsedFunction
value = 0
[../]
[./bc_fnr]
type = ParsedFunction
value = 0
[../]
[./forcing_fn]
# type = ParsedFunction
# value = 0
type = MTPiecewiseConst2D
[../]
[./solution]
type = MTPiecewiseConst2D
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
# Note: MOOSE's DirichletBCs do not work properly with shape functions that do not
# have DOFs at the element edges. This test works because the solution
# has been designed to be zero at the boundary which is satisfied by the IC
# Ticket #1352
active = ''
[./bc_all]
type=FunctionDirichletBC
variable = u
boundary = 'top bottom left right'
function = bc_fn
[../]
[./bc_top]
type = FunctionNeumannBC
variable = u
boundary = 'top'
function = bc_fnt
[../]
[./bc_bottom]
type = FunctionNeumannBC
variable = u
boundary = 'bottom'
function = bc_fnb
[../]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1.e-10
[./Adaptivity]
[../]
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[./out]
type = Exodus
elemental_as_nodal = true
[../]
[]
test/tests/misc/check_error/kernel_with_empty_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = ''
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/multiapps/grid-sequencing/coarse.i
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[time]
type = TimeDerivative
variable = u
[]
[./diff]
type = Diffusion
variable = u
[../]
[rxn]
type = Reaction
variable = u
[]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Executioner]
type = Transient
num_steps = 2
dt = 1
solve_type = 'PJFNK'
petsc_options = '-snes_monitor_solution'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
test/tests/controls/time_periods/dgkernels/dgkernels.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Adaptivity]
marker = uniform_marker
[./Markers]
[./uniform_marker]
type = UniformMarker
mark = REFINE
[../]
[../]
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
initial_condition = 1
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[./dg_diff2]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 4
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
# petsc_options_iname = '-pc_type -pc_hypre_type'
# petsc_options_value = 'hypre boomeramg'
num_steps = 4
dt = 1
nl_rel_tol = 1e-10
[]
[Outputs]
exodus = true
[]
[Controls]
[./dg_problem]
type = TimePeriod
enable_objects = 'DGKernels/dg_diff2'
disable_objects = 'DGKernel::dg_diff'
start_time = '2'
execute_on = 'initial timestep_begin'
[../]
[]
test/tests/meshgenerators/mesh_side_set_generator/mesh_side_set_generator.i
[Mesh]
[./gmg]
type = GeneratedMeshGenerator
dim = 3
nx = 4
ny = 4
nz = 4
elem_type = TET4
[]
[./left_block]
type = SubdomainBoundingBoxGenerator
input = gmg
block_id = 1
block_name = left_block
bottom_left = '0 0 0'
top_right = '0.5 1 1'
[]
[./right_block]
type = SubdomainBoundingBoxGenerator
input = left_block
block_id = 2
block_name = right_block
bottom_left = '0.5 0 0'
top_right = '1 1 1'
[]
[./center_side_set]
type = SideSetsBetweenSubdomainsGenerator
input = right_block
master_block = left_block
paired_block = right_block
new_boundary = center_side_set
[]
[./center_mesh]
type = MeshSideSetGenerator
input = center_side_set
boundaries = center_side_set
block_id = 10
block_name = center_mesh
[]
[]
[Variables]
[./c_volume]
[./InitialCondition]
type = FunctionIC
function = '1-(x-0.5)^2+(y-0.5)^2+(z-0.5)^2'
[../]
[../]
[./c_plane]
block = 'center_mesh'
[../]
[]
[Kernels]
[./volume_diff]
type = Diffusion
variable = c_volume
block = 'left_block right_block'
[../]
[./volume_dt]
type = TimeDerivative
variable = c_volume
block = 'left_block right_block'
[../]
# couple the lower dimensional variable to the volume variable
[./plane_reaction]
type = Reaction
variable = c_plane
block = 'center_mesh'
[../]
[./plane_coupled]
type = CoupledForce
variable = c_plane
v = c_volume
block = 'center_mesh'
[../]
[]
[Executioner]
type = Transient
dt = 0.01
num_steps = 2
[]
[Outputs]
exodus = true
[]
test/tests/mortar/gap-conductance-2d-non-conforming/gap-conductance.i
[Mesh]
[file]
type = FileMeshGenerator
file = nodal_normals_test_offset_nonmatching_gap.e
[]
[./master]
input = file
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '20'
[../]
[./slave]
input = master
type = LowerDBlockFromSidesetGenerator
sidesets = '1'
new_block_id = '10'
[../]
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[./T]
block = '1 2'
[../]
[./lambda]
block = '10'
[../]
[]
[BCs]
[./neumann]
type = FunctionGradientNeumannBC
exact_solution = exact_soln
variable = T
boundary = '3 4 5 6 7 8'
[../]
[]
[Kernels]
[./conduction]
type = Diffusion
variable = T
block = '1 2'
[../]
[./sink]
type = Reaction
variable = T
block = '1 2'
[../]
[./forcing_function]
type = BodyForce
variable = T
function = forcing_function
block = '1 2'
[../]
[]
[Functions]
[./forcing_function]
type = ParsedFunction
value = '-4 + x^2 + y^2'
[../]
[./exact_soln]
type = ParsedFunction
value = 'x^2 + y^2'
[../]
[]
[Debug]
show_var_residual_norms = 1
[]
[Constraints]
[./mortar]
type = GapHeatConductanceTest
master_boundary = 2
slave_boundary = 1
master_subdomain = 20
slave_subdomain = 10
variable = lambda
slave_variable = T
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
solve_type = NEWTON
type = Steady
petsc_options_iname = '-pc_type -snes_linesearch_type'
petsc_options_value = 'lu basic'
[]
[Outputs]
exodus = true
[dofmap]
type = DOFMap
execute_on = 'initial'
[]
[]
modules/phase_field/test/tests/Nucleation/force.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
nz = 0
xmin = 0
xmax = 20
ymin = 0
ymax = 20
elem_type = QUAD4
[]
[Variables]
[./c]
[../]
[]
[Kernels]
[./c_force]
type = DiscreteNucleationForce
variable = c
map = map
no_nucleus_value = -1
nucleus_value = 2
[../]
[./c_react]
type = Reaction
variable = c
[../]
[]
[UserObjects]
[./inserter]
type = DiscreteNucleationInserter
hold_time = 0.4
probability = 0.01
seed = 12346
[../]
[./map]
type = DiscreteNucleationMap
radius = 3.27
int_width = 2
periodic = c
inserter = inserter
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
nl_abs_tol = 1e-10
num_steps = 10
dt = 0.2
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
test/tests/transfers/multiapp_conservative_transfer/sub_nearest_point.i
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.01 # to make sure the meshes don't align
xmax = 0.49 # to make sure the meshes don't align
ymax = 1
nx = 10
ny = 10
[]
[block1]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0.2 0.2 0'
top_right = '0.3 0.8 0'
[]
[]
[Variables]
[sink]
family = MONOMIAL
order = CONSTANT
[]
[]
[Functions]
[sink_func]
type = ParsedFunction
value = '5e2*x*(0.5-x)+5e1'
[]
[]
[Kernels]
[reaction]
type = Reaction
variable = sink
[]
[coupledforce]
type = BodyForce
variable = sink
function = sink_func
[]
[]
[AuxVariables]
[from_master]
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Postprocessors]
[sink]
type = ElementIntegralVariablePostprocessor
block = 1
variable = sink
execute_on = 'transfer nonlinear TIMESTEP_END'
[]
[from_master_pp]
type = ElementIntegralVariablePostprocessor
block = 1
variable = from_master
execute_on = 'transfer nonlinear TIMESTEP_END'
[]
[]
[Outputs]
exodus = true
[]
test/tests/variables/fe_hier/hier-1-1d.i
###########################################################
# This is a simple test demonstrating the use of the
# Hierarchic variable type.
#
# @Requirement F3.10
###########################################################
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 5
elem_type = EDGE3
[]
[Functions]
[./bc_fnl]
type = ParsedFunction
value = -1
[../]
[./bc_fnr]
type = ParsedFunction
value = 1
[../]
[./forcing_fn]
type = ParsedFunction
value = x
[../]
[./solution]
type = ParsedGradFunction
value = x
grad_x = 1
[../]
[]
# Hierarchic Variable type
[Variables]
[./u]
order = FIRST
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/time_integrators/implicit-euler/ie-monomials.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[../]
[]
[ICs]
[./u_ic]
type = ConstantIC
variable = u
value = 1
[../]
[]
[Functions]
active = 'forcing_fn exact_fn'
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[Kernels]
[./time]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[]
[BCs]
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
nl_rel_tol = 1e-10
num_steps = 1
[]
[Outputs]
execute_on = 'timestep_end'
console = true
[]
modules/phase_field/test/tests/phase_field_kernels/CoupledAllenCahn.i
#
# Test the coupled Allen-Cahn Bulk kernel
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
xmax = 12
ymax = 12
elem_type = QUAD4
[]
[Variables]
[./w]
[../]
[./eta]
order = FIRST
family = LAGRANGE
[./InitialCondition]
type = SmoothCircleIC
x1 = 0.0
y1 = 0.0
radius = 6.0
invalue = 0.9
outvalue = 0.1
int_width = 3.0
[../]
[../]
[]
[Kernels]
[./detadt]
type = TimeDerivative
variable = eta
[../]
[./ACBulk]
type = CoupledAllenCahn
variable = w
v = eta
f_name = F
[../]
[./W]
type = Reaction
variable = w
[../]
[./CoupledBulk]
type = MatReaction
variable = eta
v = w
[../]
[./ACInterface]
type = ACInterface
variable = eta
kappa_name = 1
[../]
[]
[Materials]
[./consts]
type = GenericConstantMaterial
prop_names = 'L'
prop_values = '1'
[../]
[./free_energy]
type = DerivativeParsedMaterial
f_name = F
args = 'eta'
function = '2 * eta^2 * (1-eta)^2 - 0.2*eta'
derivative_order = 2
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Executioner]
type = Transient
scheme = 'bdf2'
solve_type = 'PJFNK'
l_max_its = 15
l_tol = 1.0e-4
nl_max_its = 10
nl_rel_tol = 1.0e-11
start_time = 0.0
num_steps = 2
dt = 0.5
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
hide = w
file_base = AllenCahn_out
exodus = true
[]
test/tests/variables/fe_hier/hier-2-1d.i
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 5
elem_type = EDGE3
[]
[Functions]
[./bc_fnl]
type = ParsedFunction
value = -2*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 2*x
[../]
[./forcing_fn]
type = ParsedFunction
value = -2+x*x
[../]
[./solution]
type = ParsedGradFunction
value = x*x
grad_x = 2*x
[../]
[]
[Variables]
[./u]
order = SECOND
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/time_integrators/explicit-euler/ee-1d-quadratic-neumann.i
[GlobalParams]
implicit = false
[]
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 10
elem_type = EDGE3
[]
[Functions]
[./ic]
type = ParsedFunction
value = 0
[../]
[./forcing_fn]
type = ParsedFunction
value = x*x-2*t+t*x*x
[../]
[./exact_fn]
type = ParsedFunction
value = t*x*x
[../]
[./left_bc_fn]
type = ParsedFunction
value = -t*2*x
[../]
[./right_bc_fn]
type = ParsedFunction
value = t*2*x
[../]
[]
[Variables]
[./u]
order = SECOND
family = LAGRANGE
[./InitialCondition]
type = FunctionIC
function = ic
[../]
[../]
[]
[Kernels]
[./td]
type = TimeDerivative
variable = u
implicit = true
[../]
[./diff]
type = Diffusion
variable = u
[../]
[./abs]
type = Reaction
variable = u
[../]
[./ffn]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./left]
type = FunctionNeumannBC
variable = u
boundary = '0'
function = left_bc_fn
[../]
[./right]
type = FunctionNeumannBC
variable = u
boundary = '1'
function = right_bc_fn
[../]
[]
[Postprocessors]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Executioner]
type = Transient
scheme = 'explicit-euler'
solve_type = 'LINEAR'
l_tol = 1e-12
start_time = 0.0
num_steps = 10
dt = 0.001
[]
[Outputs]
exodus = true
[./console]
type = Console
max_rows = 10
[../]
[]
test/tests/variables/fe_hermite/hermite-3-1d.i
###########################################################
# This is a simple test demonstrating the use of the
# Hermite variable type.
#
# @Requirement F3.10
###########################################################
[Mesh]
type = GeneratedMesh
dim = 1
xmin = -1
xmax = 1
nx = 5
elem_type = EDGE3
[]
[Functions]
[./bc_fnl]
type = ParsedFunction
value = -3*x*x
[../]
[./bc_fnr]
type = ParsedFunction
value = 3*x*x
[../]
[./forcing_fn]
type = ParsedFunction
value = -6*x+(x*x*x)
[../]
[./solution]
type = ParsedGradFunction
value = x*x*x
grad_x = 3*x*x
[../]
[]
# Hermite Variable type
[Variables]
[./u]
order = THIRD
family = HERMITE
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
[./bc_left]
type = FunctionNeumannBC
variable = u
boundary = 'left'
function = bc_fnl
[../]
[./bc_right]
type = FunctionNeumannBC
variable = u
boundary = 'right'
function = bc_fnr
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/misc/check_error/aux_kernel_with_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[AuxKernels]
[./nope]
type = SelfAux
variable = u
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/bcs/penalty_dirichlet_bc/penalty_dirichlet_bc_test.i
[Mesh]
type = GeneratedMesh
dim = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
nx = 10
ny = 10
elem_type = QUAD9
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = -2*(x*x+y*y-2)+(1-x*x)*(1-y*y)
[../]
[./solution]
type = ParsedGradFunction
value = (1-x*x)*(1-y*y)
grad_x = 2*(x*y*y-x)
grad_y = 2*(x*x*y-y)
[../]
[]
[Variables]
[./u]
order = SECOND
family = HIERARCHIC
[../]
[]
[Kernels]
active = 'diff forcing reaction'
[./diff]
type = Diffusion
variable = u
[../]
[./reaction]
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[BCs]
active = 'bc_all'
[./bc_all]
type = PenaltyDirichletBC
variable = u
value = 0
boundary = 'top left right bottom'
penalty = 1e5
[../]
[]
[Postprocessors]
[./dofs]
type = NumDOFs
[../]
[./h]
type = AverageElementSize
[../]
[./L2error]
type = ElementL2Error
variable = u
function = solution
[../]
[./H1error]
type = ElementH1Error
variable = u
function = solution
[../]
[./H1Semierror]
type = ElementH1SemiError
variable = u
function = solution
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1e-14
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
csv = true
[]
test/tests/dgkernels/2d_diffusion_dg/2d_diffusion_dg_test.i
###########################################################
# This is a test of the Discontinuous Galerkin System.
# Discontinous basis functions are used (Monomials) and
# a the Laplacian DGKernel contributes to the
# internal edges around each element. Jumps are allowed
# by penalized by this method.
#
# @Requirement F3.60
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
# xmin = -1
# xmax = 1
# ymin = -1
# ymax = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
active = 'u'
[./u]
order = FIRST
family = MONOMIAL
[./InitialCondition]
type = ConstantIC
value = 1
[../]
[../]
[]
[Functions]
active = 'forcing_fn exact_fn'
[./forcing_fn]
type = ParsedFunction
# function = -4.0+(x*x)+(y*y)
# function = x
# function = (x*x)-2.0
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
# function = (x*x*x)-6.0*x
[../]
[./exact_fn]
type = ParsedGradFunction
# function = x
# grad_x = 1
# grad_y = 0
# function = (x*x)+(y*y)
# grad_x = 2*x
# grad_y = 2*y
# function = (x*x)
# grad_x = 2*x
# grad_y = 0
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
# function = (x*x*x)
# grad_x = 3*x*x
# grad_y = 0
[../]
[]
[Kernels]
active = 'diff abs forcing'
[./diff]
type = Diffusion
variable = u
[../]
[./abs] # u * v
type = Reaction
variable = u
[../]
[./forcing]
type = BodyForce
variable = u
function = forcing_fn
[../]
[]
[DGKernels]
active = 'dg_diff'
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[]
[BCs]
active = 'all'
[./all]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
# petsc_options = '-snes_mf'
# petsc_options_iname = '-pc_type -pc_hypre_type'
# petsc_options_value = 'hypre boomeramg'
# petsc_options = '-snes_mf'
# max_r_steps = 2
[./Adaptivity]
steps = 2
refine_fraction = 1.0
coarsen_fraction = 0
max_h_level = 8
[../]
nl_rel_tol = 1e-10
# nl_rel_tol = 1e-12
[]
[Postprocessors]
active = 'h dofs l2_err'
[./h]
type = AverageElementSize
[../]
[./dofs]
type = NumDOFs
[../]
[./l2_err]
type = ElementL2Error
variable = u
function = exact_fn
[../]
[]
[Outputs]
file_base = out
exodus = true
csv = true
[]
test/tests/misc/check_error/interface_kernel_with_aux_var.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[./u]
order = FIRST
family = LAGRANGE
[../]
[]
[AuxVariables]
[./v]
[../]
[]
[Kernels]
[./diff]
type = Diffusion
variable = u
[../]
[./rea]
type = Reaction
variable = u
[../]
[]
[InterfaceKernels]
[./nope]
type = InterfaceDiffusion
variable = v
neighbor_var = u
boundary = 'left'
D = 4
D_neighbor = 2
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = u
boundary = 1
value = 0
[../]
[./right]
type = DirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
file_base = out
exodus = true
[]
test/tests/preconditioners/pbp/pbp_dg_test.i
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
xmin = 0
xmax = 1
ymin = 0
ymax = 1
elem_type = QUAD4
[]
[Variables]
[./u]
order = FIRST
family = MONOMIAL
[../]
[./v]
order = FIRST
family = MONOMIAL
[../]
[]
[Preconditioning]
[./PBP]
type = PBP
solve_order = 'u v'
preconditioner = 'AMG AMG'
[../]
[]
[Kernels]
[./diff_u]
type = Diffusion
variable = u
[../]
[./abs_u]
type = Reaction
variable = u
[../]
[./forcing_u]
type = BodyForce
variable = u
function = forcing_fn
[../]
[./diff_v]
type = Diffusion
variable = v
[../]
[./abs_v]
type = Reaction
variable = v
[../]
[./forcing_v]
type = BodyForce
variable = v
function = forcing_fn
[../]
[./conv_v]
type = CoupledForce
variable = v
v = u
[../]
[]
[DGKernels]
[./dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[../]
[./dg_diff_2]
type = DGDiffusion
variable = v
epsilon = -1
sigma = 6
[../]
[]
[Functions]
[./forcing_fn]
type = ParsedFunction
value = 2*pow(e,-x-(y*y))*(1-2*y*y)
[../]
[./exact_fn]
type = ParsedGradFunction
value = pow(e,-x-(y*y))
grad_x = -pow(e,-x-(y*y))
grad_y = -2*y*pow(e,-x-(y*y))
[../]
[]
[BCs]
[./all_u]
type = DGFunctionDiffusionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[./all_v]
type = DGFunctionDiffusionDirichletBC
variable = v
boundary = '0 1 2 3'
function = exact_fn
epsilon = -1
sigma = 6
[../]
[]
[Problem]
type = FEProblem
error_on_jacobian_nonzero_reallocation = true
[]
[Executioner]
type = Steady
l_max_its = 10
nl_max_its = 10
solve_type = JFNK
[]
[Outputs]
exodus = true
[]
Child Objects
- test/include/kernels/RenamedKernel.h
- test/include/kernels/DeprecatedKernel.h
- test/include/kernels/ExpiredKernel.h
- modules/phase_field/include/kernels/CoefReaction.h
- test/include/kernels/DeprecatedParamKernel.h
- test/include/kernels/CoefReaction.h
test/include/kernels/RenamedKernel.h
// This file is part of the MOOSE framework
// https://www.mooseframework.org
//
// All rights reserved, see COPYRIGHT for full restrictions
// https://github.com/idaholab/moose/blob/master/COPYRIGHT
//
// Licensed under LGPL 2.1, please see LICENSE for details
// https://www.gnu.org/licenses/lgpl-2.1.html
#pragma once
#include "Reaction.h"
class RenamedKernel : public Reaction
{
public:
static InputParameters validParams();
RenamedKernel(const InputParameters & parameters);
protected:
virtual Real computeQpResidual() override;
virtual Real computeQpJacobian() override;
Real _coef;
};
test/include/kernels/DeprecatedKernel.h
// This file is part of the MOOSE framework
// https://www.mooseframework.org
//
// All rights reserved, see COPYRIGHT for full restrictions
// https://github.com/idaholab/moose/blob/master/COPYRIGHT
//
// Licensed under LGPL 2.1, please see LICENSE for details
// https://www.gnu.org/licenses/lgpl-2.1.html
#pragma once
#include "Reaction.h"
class DeprecatedKernel : public Reaction
{
public:
static InputParameters validParams();
DeprecatedKernel(const InputParameters & parameters);
protected:
virtual Real computeQpResidual();
virtual Real computeQpJacobian();
Real _coef;
};
test/include/kernels/ExpiredKernel.h
// This file is part of the MOOSE framework
// https://www.mooseframework.org
//
// All rights reserved, see COPYRIGHT for full restrictions
// https://github.com/idaholab/moose/blob/master/COPYRIGHT
//
// Licensed under LGPL 2.1, please see LICENSE for details
// https://www.gnu.org/licenses/lgpl-2.1.html
#pragma once
#include "Reaction.h"
class ExpiredKernel : public Reaction
{
public:
static InputParameters validParams();
ExpiredKernel(const InputParameters & parameters);
protected:
virtual Real computeQpResidual() override;
virtual Real computeQpJacobian() override;
Real _coef;
};
modules/phase_field/include/kernels/CoefReaction.h
// This file is part of the MOOSE framework
// https://www.mooseframework.org
//
// All rights reserved, see COPYRIGHT for full restrictions
// https://github.com/idaholab/moose/blob/master/COPYRIGHT
//
// Licensed under LGPL 2.1, please see LICENSE for details
// https://www.gnu.org/licenses/lgpl-2.1.html
#pragma once
#include "Reaction.h"
// Forward Declarations
class CoefReaction;
template <>
InputParameters validParams<CoefReaction>();
class CoefReaction : public Reaction
{
public:
CoefReaction(const InputParameters & parameters);
protected:
virtual Real computeQpResidual() override;
virtual Real computeQpJacobian() override;
/// input parameter multiplied by the reaction kernel
const Real _coef;
};
test/include/kernels/DeprecatedParamKernel.h
// This file is part of the MOOSE framework
// https://www.mooseframework.org
//
// All rights reserved, see COPYRIGHT for full restrictions
// https://github.com/idaholab/moose/blob/master/COPYRIGHT
//
// Licensed under LGPL 2.1, please see LICENSE for details
// https://www.gnu.org/licenses/lgpl-2.1.html
#pragma once
#include "Reaction.h"
class DeprecatedParamKernel : public Reaction
{
public:
static InputParameters validParams();
DeprecatedParamKernel(const InputParameters & parameters);
protected:
virtual Real computeQpResidual() override;
virtual Real computeQpJacobian() override;
Real _coef;
};
test/include/kernels/CoefReaction.h
// This file is part of the MOOSE framework
// https://www.mooseframework.org
//
// All rights reserved, see COPYRIGHT for full restrictions
// https://github.com/idaholab/moose/blob/master/COPYRIGHT
//
// Licensed under LGPL 2.1, please see LICENSE for details
// https://www.gnu.org/licenses/lgpl-2.1.html
#pragma once
#include "Reaction.h"
class CoefReaction : public Reaction
{
public:
static InputParameters validParams();
CoefReaction(const InputParameters & parameters);
protected:
virtual Real computeQpResidual();
virtual Real computeQpJacobian();
Real _coef;
};