- functionThe function to use for controlling the specified parameter.
C++ Type:FunctionName
Controllable:No
Description:The function to use for controlling the specified parameter.
- parameterThe input parameter(s) to control. Specify a single parameter name and all parameters in all objects matching the name will be updated
C++ Type:std::string
Controllable:No
Description:The input parameter(s) to control. Specify a single parameter name and all parameters in all objects matching the name will be updated
BoolFunctionControl
The BoolFunctionControl object is designed to control a "bool" parameter with a function rather than use the value specified in the input file. If the function value equals to zero, the controlled parameter will be set to false, otherwise its value will be set to true.
For a discussion on the naming of objects and parameters see Object and Parameter Names section.
Input Parameters
- depends_onThe Controls that this control relies upon (i.e. must execute before this one)
C++ Type:std::vector<std::string>
Controllable:No
Description:The Controls that this control relies upon (i.e. must execute before this one)
- execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Options:FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM, PRE_MULTIAPP_SETUP
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
Advanced Parameters
Input Files
(test/tests/controls/bool_function_control/bool_function_control.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[Functions]
[solve_fn]
type = ParsedFunction
expression = 'if(t<0.3, 1, 0)'
[]
[]
[Variables]
[u]
initial_condition = 1
[]
[]
[Kernels]
[td]
type = TimeDerivative
variable = u
[]
[bf]
type = BodyForce
variable = u
function = 1
[]
[]
[Controls]
[solve_ctrl]
type = BoolFunctionControl
function = solve_fn
parameter = '*/*/solve'
execute_on = timestep_begin
[]
[]
[Postprocessors]
[./u_val]
type = ElementAverageValue
variable = u
execute_on = 'initial timestep_begin'
[../]
[]
[Executioner]
type = Transient
num_steps = 10
dt = 0.1
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/controls/switch-pressure-bc/switch_vel_pres_bc.i)
rho = 'rho'
l = 10
inlet_area = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_velocity = 0.001
end_time = 3.0
switch_time = 1.0
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 10
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = ${inlet_velocity}
[]
[v]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[]
[AuxVariables]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T
rho = rho
drho_dt = drho_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T
v = power_density
[]
[]
[FVBCs]
# Inlet
[inlet_u]
type = WCNSFVSwitchableInletVelocityBC
variable = u
boundary = 'left'
mdot_pp = 'inlet_mdot'
area_pp = 'surface_inlet'
rho = 'rho'
switch_bc = true
face_limiter = 1.0
[]
[outlet_u]
type = WCNSFVSwitchableInletVelocityBC
variable = u
boundary = 'right'
mdot_pp = 'inlet_mdot'
area_pp = 'surface_inlet'
rho = 'rho'
switch_bc = false
scaling_factor = -1.0
face_limiter = 1.0
[]
[inlet_v]
type = WCNSFVInletVelocityBC
variable = v
boundary = 'left'
mdot_pp = 0
area_pp = 'surface_inlet'
rho = 'rho'
[]
[inlet_T]
type = WCNSFVInletTemperatureBC
variable = T
boundary = 'left'
temperature_pp = 'inlet_T'
[]
[outlet_T]
type = NSFVOutflowTemperatureBC
variable = T
boundary = 'right'
u = u
v = v
rho = 'rho'
cp = 'cp'
backflow_T = ${inlet_temp}
[]
[outlet_p]
type = INSFVSwitchableOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
switch_bc = true
face_limiter = 1.0
[]
[inlet_p]
type = INSFVSwitchableOutletPressureBC
variable = pressure
boundary = 'left'
function = ${outlet_pressure}
switch_bc = false
face_limiter = 1.0
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'top bottom'
function = 0
[]
[]
[Functions]
[func_coef]
type = ParsedFunction
expression = 'if(t<${switch_time} | t>2.0*${switch_time}, 1, 0)'
[]
[func_coef_comp]
type = ParsedFunction
expression = 'if(t<${switch_time} | t>2.0*${switch_time}, 0, 1)'
[]
[mass_flux_and_pressure_test_scaling]
type = ParsedFunction
expression = 'if(t<${switch_time} | t>2.0*${switch_time}, 0.1, 0.2)'
[]
[]
[Controls]
[func_control_u_inlet]
type = BoolFunctionControl
parameter = 'FVBCs/inlet_u/switch_bc'
function = 'func_coef'
execute_on = 'initial timestep_begin'
[]
[func_control_u_outlet]
type = BoolFunctionControl
parameter = 'FVBCs/outlet_u/switch_bc'
function = 'func_coef_comp'
execute_on = 'initial timestep_begin'
[]
[func_control_p_outlet]
type = BoolFunctionControl
parameter = 'FVBCs/outlet_p/switch_bc'
function = 'func_coef'
execute_on = 'initial timestep_begin'
[]
[func_control_p_inlet]
type = BoolFunctionControl
parameter = 'FVBCs/inlet_p/switch_bc'
function = 'func_coef_comp'
execute_on = 'initial timestep_begin'
[]
[func_control_limiter_u_inlet]
type = RealFunctionControl
parameter = 'FVBCs/inlet_u/face_limiter'
function = 'mass_flux_and_pressure_test_scaling'
execute_on = 'initial timestep_begin'
[]
[func_control_limiter_u_outlet]
type = RealFunctionControl
parameter = 'FVBCs/outlet_u/face_limiter'
function = 'mass_flux_and_pressure_test_scaling'
execute_on = 'initial timestep_begin'
[]
[func_control_limiter_p_outlet]
type = RealFunctionControl
parameter = 'FVBCs/outlet_p/face_limiter'
function = 'mass_flux_and_pressure_test_scaling'
execute_on = 'initial timestep_begin'
[]
[func_control_limiter_p_inlet]
type = RealFunctionControl
parameter = 'FVBCs/inlet_p/face_limiter'
function = 'mass_flux_and_pressure_test_scaling'
execute_on = 'initial timestep_begin'
[]
[]
# used for the boundary conditions in this example
[Postprocessors]
[inlet_mdot]
type = Receiver
default = '${fparse 1980 * inlet_velocity * inlet_area}'
[]
[surface_inlet]
type = AreaPostprocessor
boundary = 'left'
execute_on = 'INITIAL'
[]
[inlet_T]
type = Receiver
default = ${inlet_temp}
[]
[outlet_mfr]
type = VolumetricFlowRate
boundary = 'right'
advected_quantity = 1.0
vel_x = u
vel_y = v
[]
[]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[FunctorMaterials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyFunctorMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
dt = 0.1
end_time = ${end_time}
nl_abs_tol = 1e-12
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
[]
[Outputs]
csv = true
execute_on = 'TIMESTEP_END'
[]
(modules/navier_stokes/test/tests/finite_volume/materials/flow_diode/transient_operation.i)
# Horizontal H junction with flow in different directions in the two branches
# One of the branches has a diode against the direction of the flow that can
# be triggered using the Controls
# There are 3 different strategies available for the diode blocking the flow
# - based on a time trigger
# - based on a pressure drop (here chosen across the diode)
# - based on a mass flow rate (here chosen through the diode)
mu = 0.1
rho = 10
nx = 10
ny = 5
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 0.3 1'
dy = '0.5 0.2 0.5'
ix = '${nx} ${fparse nx/2} ${nx}'
iy = '${ny} ${ny} ${ny}'
subdomain_id = '1 1 1
2 1 2
3 4 1'
[]
[add_walls]
type = SideSetsBetweenSubdomainsGenerator
input = 'cmg'
primary_block = '1 3 4'
paired_block = '2'
new_boundary = 'walls'
[]
[remove_wall_blocks]
type = BlockDeletionGenerator
input = add_walls
block = 2
[]
# Add inlets and outlets
[top_left]
type = ParsedGenerateSideset
input = remove_wall_blocks
combinatorial_geometry = 'x<0.001 & y>0.6'
new_sideset_name = top_left
[]
[bottom_left]
type = ParsedGenerateSideset
input = top_left
combinatorial_geometry = 'x<0.001 & y<0.6'
new_sideset_name = bottom_left
[]
[top_right]
type = ParsedGenerateSideset
input = bottom_left
combinatorial_geometry = 'x>2.299 & y>0.6'
new_sideset_name = top_right
[]
[bottom_right]
type = ParsedGenerateSideset
input = top_right
combinatorial_geometry = 'x>2.299 & y<0.6'
new_sideset_name = bottom_right
[]
# Extra surfaces
[diode_inlet]
type = SideSetsBetweenSubdomainsGenerator
input = bottom_right
primary_block = 4
paired_block = 3
new_boundary = 'diode_inlet'
[]
[mid_section]
type = SideSetsBetweenSubdomainsGenerator
input = diode_inlet
primary_block = 4
paired_block = 1
new_boundary = 'mid_connection'
[]
[reduce_blocks]
type = RenameBlockGenerator
input = 'mid_section'
old_block = '4 3 1'
new_block = '1 diode fluid'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'pins_rhie_chow_interpolator'
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[]
[Modules]
[NavierStokesFV]
compressibility = 'incompressible'
porous_medium_treatment = true
density = ${rho}
dynamic_viscosity = ${mu}
initial_velocity = '1e-6 1e-6 0'
initial_pressure = 0.0
inlet_boundaries = 'bottom_left top_right'
momentum_inlet_types = 'fixed-velocity fixed-velocity'
momentum_inlet_function = '1 0; -1 0'
wall_boundaries = 'top bottom walls'
momentum_wall_types = 'noslip noslip noslip'
outlet_boundaries = 'bottom_right top_left'
momentum_outlet_types = 'fixed-pressure fixed-pressure'
pressure_function = '1 1'
friction_blocks = 'fluid; diode'
friction_types = 'darcy forchheimer; darcy forchheimer'
# Base friction
# friction_coeffs = 'Darcy Forchheimer; Darcy Forchheimer'
# Combined with diode
friction_coeffs = 'combined_linear combined_quadratic; combined_linear combined_quadratic'
# Porosity jump treatment
# Option 1: diffusion correction
use_friction_correction = true
consistent_scaling = 10
# Option 2: bernouilli jump
# porosity_interface_pressure_treatment = bernoulli
mass_advection_interpolation = 'average'
momentum_advection_interpolation = 'average'
[]
[]
[FunctorMaterials]
[porosity]
type = ADGenericFunctorMaterial
prop_names = 'porosity'
prop_values = '0.5'
[]
[base_friction]
type = ADGenericVectorFunctorMaterial
prop_names = 'Darcy Forchheimer'
prop_values = '220 240 260 0 0 0'
[]
# Material definitions needed for the diode
[diode]
type = NSFVFrictionFlowDiodeFunctorMaterial
# Friction only in X direction
direction = '-1 0 0'
additional_linear_resistance = '20000 0 0'
additional_quadratic_resistance = '0 0 0'
base_linear_friction_coefs = 'Darcy'
base_quadratic_friction_coefs = 'Forchheimer'
sum_linear_friction_name = 'diode_linear'
sum_quadratic_friction_name = 'diode_quad'
block = 'diode'
turn_on_diode = false
[]
[combine_linear_friction]
type = ADPiecewiseByBlockVectorFunctorMaterial
prop_name = 'combined_linear'
subdomain_to_prop_value = 'fluid Darcy
diode diode_linear'
[]
[combine_quadratic_friction]
type = ADPiecewiseByBlockVectorFunctorMaterial
prop_name = 'combined_quadratic'
subdomain_to_prop_value = 'fluid Forchheimer
diode diode_quad'
[]
# density is constant
[momentum]
type = ADGenericVectorFunctorMaterial
prop_names = 'momentum'
prop_values = 'superficial_vel_x superficial_vel_y 0'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'lu NONZERO 200'
line_search = 'none'
end_time = 0.2
dt = 0.015
nl_abs_tol = 1e-12
[]
[Controls]
active = 'pdrop_based'
# Case 1: Diode turns on at a certain time and blocks (adds friction) flow at a given time
[time_based]
type = BoolFunctionControl
function = time_function
parameter = 'FunctorMaterials/diode/turn_on_diode'
execute_on = timestep_begin
[]
# Case 2: Diode looks at pressure drop, reduces flow if positive pressure drop
# This will not oscillate as the diode increases the pressure drop
[pdrop_based]
type = BoolFunctionControl
function = pdrop_positive
parameter = 'FunctorMaterials/diode/turn_on_diode'
execute_on = timestep_begin
[]
# Case 3: Diode looks at flow direction & quantity, reduces flow if too much flow
# in a given direction
# This will oscillate (turn on/off on each step) if the action of turning the diode
# makes the amount of flow smaller than the threshold for turning on the diode
[flow_based]
type = BoolFunctionControl
function = velocity_big_enough
parameter = 'FunctorMaterials/diode/turn_on_diode'
execute_on = timestep_begin
[]
[]
[Functions]
# Functions are used to parse postprocessors and provide them to a BoolFunctionControl
[time_function]
type = ParsedFunction
expression = 'if(t<0.1, 0, 1)'
[]
[pdrop_positive]
type = ParsedFunction
expression = 'if(pdrop_diode>100, 1, 0)'
symbol_names = pdrop_diode
symbol_values = pdrop_diode
[]
[velocity_big_enough]
type = ParsedFunction
expression = 'if(flow_diode<-0.4, 1, 0)'
symbol_names = flow_diode
symbol_values = flow_diode
[]
[]
[Postprocessors]
# Analysis of the simulation
[mdot_top]
type = VolumetricFlowRate
boundary = 'top_right'
vel_x = superficial_vel_x
vel_y = superficial_vel_y
advected_quantity = ${rho}
[]
[mdot_bottom]
type = VolumetricFlowRate
boundary = 'bottom_right'
vel_x = superficial_vel_x
vel_y = superficial_vel_y
advected_quantity = ${rho}
[]
[mdot_middle]
type = VolumetricFlowRate
boundary = 'mid_connection'
vel_x = superficial_vel_x
vel_y = superficial_vel_y
advected_quantity = ${rho}
[]
[pdrop_top_channel]
type = PressureDrop
upstream_boundary = 'top_left'
downstream_boundary = 'top_right'
weighting_functor = 'momentum'
boundary = 'top_left top_right'
pressure = pressure
[]
[pdrop_bottom_channel]
type = PressureDrop
upstream_boundary = 'bottom_left'
downstream_boundary = 'bottom_right'
weighting_functor = 'momentum'
boundary = 'bottom_left bottom_right'
pressure = pressure
[]
# Diode operation
[pdrop_diode]
type = PressureDrop
upstream_boundary = 'diode_inlet'
downstream_boundary = 'top_left'
weighting_functor = 'momentum'
boundary = 'diode_inlet top_left'
pressure = pressure
[]
[flow_diode]
type = VolumetricFlowRate
boundary = 'diode_inlet'
vel_x = superficial_vel_x
vel_y = superficial_vel_y
advected_quantity = ${rho}
[]
[]
[Outputs]
exodus = true
csv = true
[]