- dxIntervals in the X direction
C++ Type:std::vector<double>
Controllable:No
Description:Intervals in the X direction
CartesianMeshGenerator
This CartesianMeshGenerator creates a non-uniform Cartesian mesh.
Overview
The CartesianMeshGenerator object is the built-in mesh generation capable of creating lines, rectangles, and hexahedra ("boxes"). The mesh spacing can be non-uniform and each line/rectangle/hexahedron can be assigned a separate subdomain id. The mesh automatically creates side sets that are logically named and numbered as follows:
In 1D, left = 0, right = 1
In 2D, bottom = 0, right = 1, top = 2, left = 3
In 3D, back = 0, bottom = 1, right = 2, top = 3, left = 4, front = 5
The length, width, and height of each element, as well as their subdomain id can be set independently. Each linear subdivision in x, y, or z can be additionally subdivided into sub-elements.
Example Syntax
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 3
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1
2 2 2
3 4 4
5 5 5
0 1 1
2 2 2
3 4 4
5 5 5
'
[../]
[]
Input Parameters
- dyIntervals in the Y direction (required when dim>1 otherwise ignored)
C++ Type:std::vector<double>
Controllable:No
Description:Intervals in the Y direction (required when dim>1 otherwise ignored)
- dzIntervals in the Z direction (required when dim>2 otherwise ignored)
C++ Type:std::vector<double>
Controllable:No
Description:Intervals in the Z direction (required when dim>2 otherwise ignored)
- ixNumber of grids in all intervals in the X direction (default to all one)
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Number of grids in all intervals in the X direction (default to all one)
- iyNumber of grids in all intervals in the Y direction (default to all one)
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Number of grids in all intervals in the Y direction (default to all one)
- izNumber of grids in all intervals in the Z direction (default to all one)
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Number of grids in all intervals in the Z direction (default to all one)
- show_infoFalseWhether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not to show mesh info after generating the mesh (bounding box, element types, sidesets, nodesets, subdomains, etc)
- subdomain_idBlock IDs (default to all zero)
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Block IDs (default to all zero)
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:No
Description:Set the enabled status of the MooseObject.
Advanced Parameters
- dimThe dimension of the mesh to be generated
C++ Type:MooseEnum
Options:1, 2, 3
Controllable:No
Description:The dimension of the mesh to be generated
Main Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_total_viscosity_material/steady.i)
- (test/tests/meshgenerators/refine_block_generator/test_multi.i)
- (modules/heat_conduction/test/tests/radiation_transfer_symmetry/cavity_with_pillars.i)
- (test/tests/mesh/boundary_subdomain_list/2D_9reg.i)
- (test/tests/functions/piecewise_constant_from_csv/piecewise_constant.i)
- (test/tests/meshgenerators/plane_id_mesh_generator/plane_id_grid2d.i)
- (test/tests/meshgenerators/block_deletion_generator/block_deletion_test14.i)
- (modules/stochastic_tools/examples/surrogates/pod_rb/2d_multireg/sub.i)
- (test/tests/variables/caching_fv_variables/fv_caching.i)
- (modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_INSFV.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_total_viscosity_material/steady-action.i)
- (test/tests/transfers/multiapp_variable_value_sample_transfer/full_domain_primary.i)
- (modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_action.i)
- (test/tests/meshgenerators/parsed_generate_sideset/parsed_generate_sideset_neighbor_sub_id.i)
- (modules/heat_conduction/test/tests/multiple_radiation_cavities/multiple_radiation_cavities.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/2d-rc.i)
- (modules/thermal_hydraulics/test/tests/userobjects/layered_flow_area_change/layered_flow_area_2D.i)
- (test/tests/meshgenerators/block_deletion_generator/block_deletion_not_prepared.i)
- (test/tests/auxkernels/current_boundary_id/current_boundary_id.i)
- (modules/phase_field/test/tests/initial_conditions/BlockRestriction.i)
- (test/tests/auxkernels/volume_aux/side.i)
- (modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_action_external_boundary_ray_tracing.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
- (modules/heat_conduction/test/tests/radiation_transfer_action/cavity_with_pillar_vf.i)
- (modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_cavity.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_eddy_viscosity_aux/mixing_length_eddy_viscosity.i)
- (test/tests/meshgenerators/move_node_generator/test2.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/exceptions/bad-restriction.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_eddy_viscosity_aux/steady.i)
- (modules/ray_tracing/test/tests/raykernels/errors/raykernel_errors.i)
- (modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_INSFE.i)
- (modules/heat_conduction/test/tests/radiation_transfer_symmetry/cavity_with_pillars_symmetry_bc.i)
- (modules/heat_conduction/test/tests/view_factors_symmetry/cavity_with_pillars.i)
- (test/tests/meshgenerators/refine_sideset_generator/test_secondary.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/wall_distance_capped_mixing_length_aux/capped_mixing_length.i)
- (test/tests/meshgenerators/rename_block_generator/rename_block.i)
- (modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_action_external_boundary.i)
- (modules/geochemistry/test/tests/nodal_void_volume/nodal_void_volume_adaptive.i)
- (modules/heat_conduction/test/tests/view_factors_symmetry/cavity_with_pillars_symmetry_bc.i)
- (test/tests/vectorpostprocessors/side_value_sampler/side_value_sampler.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_total_viscosity_material/mixing_length_total_viscosity.i)
- (test/tests/meshgenerators/refine_sideset_generator/test_left.i)
- (modules/heat_conduction/test/tests/postprocessors/convective_ht_side_integral.i)
- (modules/ray_tracing/test/tests/raybcs/errors/raybc_errors.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/1d-rc-continuous.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_rz_cylinder.i)
- (modules/ray_tracing/test/tests/traceray/internal_sidesets/internal_sidesets_3d.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_balance/large_gap_heat_transfer_test_rz_cylinder.i)
- (modules/reactor/test/tests/meshgenerators/subdomain_extra_element_id_generator/subdomain_elem_ids_test.i)
- (test/tests/kernels/hfem/robin_displaced.i)
- (modules/heat_conduction/test/tests/postprocessors/ad_convective_ht_side_integral.i)
- (modules/navier_stokes/test/tests/finite_volume/fvkernels/flow_diode/friction.i)
- (modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_no_action.i)
- (test/tests/auxkernels/volume_aux/element.i)
- (modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_channel.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-friction.i)
- (test/tests/meshgenerators/break_mesh_by_block_generator/break_mesh_block_pairs_restricted_3blocks.i)
- (modules/heat_conduction/test/tests/view_factors/view_factor_obstructed.i)
- (modules/ray_tracing/test/tests/traceray/internal_sidesets/internal_sidesets_2d.i)
- (modules/navier_stokes/test/tests/finite_volume/cns/shock_tube_2D_cavity/hllc_sod_shocktube_2D.i)
- (modules/geochemistry/test/tests/nodal_void_volume/nodal_void_volume.i)
- (test/tests/quadrature/order/material_with_order.i)
- (modules/navier_stokes/test/tests/finite_volume/fvbcs/wall_function/Re_t395.i)
- (test/tests/meshgenerators/refine_block_generator/test_single.i)
- (test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_3D.i)
- (test/tests/postprocessors/side_integral/side_integral_functor.i)
- (modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_PINSFV.i)
- (modules/heat_conduction/test/tests/gray_lambert_radiator/coupled_heat_conduction.i)
- (modules/heat_conduction/test/tests/generate_radiation_patch/generate_radiation_patch_grid_2D.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-action.i)
- (modules/tensor_mechanics/test/tests/ad_viscoplasticity_stress_update/exact.i)
- (test/tests/meshgenerators/break_mesh_by_block_generator/break_mesh_block_pairs_restricted.i)
- (test/tests/meshgenerators/refine_sideset_generator/test_multi.i)
- (test/tests/meshgenerators/break_mesh_by_block_generator/break_mesh_block_restricted.i)
- (modules/navier_stokes/test/tests/finite_volume/cns/mms/1d-with-bcs/straight-channel-hllc.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/1d-rc.i)
- (modules/heat_conduction/test/tests/radiative_bcs/ad_radiative_bc_cyl.i)
- (test/tests/fvbcs/fv_neumannbc/fv_neumannbc.i)
- (test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_2D.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_rz_cylinder_mortar.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-friction-action.i)
- (modules/heat_conduction/test/tests/radiative_bcs/radiative_bc_cyl.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/2d-rc-epsjump.i)
- (test/tests/mesh/face_info/face_info_two_region_quads.i)
- (test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_1D.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/1d-rc-epsjump.i)
- (test/tests/meshgenerators/fancy_extruder_generator/fancy_extruder_then_parsed_gen_sideset.i)
(test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_3D.i)
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 3
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1
2 2 2
3 4 4
5 5 5
0 1 1
2 2 2
3 4 4
5 5 5
'
[../]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_total_viscosity_material/steady.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 100
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
advected_interp_method='upwind'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '200'
iy = '10 1'
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[mixing_length]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = vel_x
rho = ${rho}
mixing_length = mixing_length
momentum_component = 'x'
u = vel_x
v = vel_y
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = vel_y
rho = ${rho}
mixing_length = mixing_length
momentum_component = 'y'
u = vel_x
v = vel_y
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[]
[AuxKernels]
[mixing_length]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_length
execute_on = 'initial'
von_karman_const = ${von_karman_const}
delta = 0.5
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_y
function = '0'
[]
[wall-u]
type = INSFVWallFunctionBC
variable = vel_x
boundary = 'top'
u = vel_x
v = vel_y
mu = ${mu}
rho = ${rho}
momentum_component = x
[]
[wall-v]
type = INSFVWallFunctionBC
variable = vel_y
boundary = 'top'
u = vel_x
v = vel_y
mu = ${mu}
rho = ${rho}
momentum_component = y
[]
[sym-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = vel_x
u = vel_x
v = vel_y
mu = total_viscosity
momentum_component = x
[]
[sym-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = vel_y
u = vel_x
v = vel_y
mu = total_viscosity
momentum_component = y
[]
[symmetry_pressure]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '0'
[]
[]
[Materials]
[total_viscosity]
type = MixingLengthTurbulentViscosityMaterial
u = 'vel_x' #computes total viscosity = mu_t + mu
v = 'vel_y' #property is called total_viscosity
mixing_length = mixing_length
mu = ${mu}
rho = ${rho}
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/refine_block_generator/test_multi.i)
[Mesh]
[eg]
type = CartesianMeshGenerator
dim = 3
dx = '2 1 1'
dy = '2 3'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1 1
1 2 0 1
0 1 1 1
2 2 2 2
2 3 1 2
1 1 1 1'
[]
[refine]
type = RefineBlockGenerator
input = eg
block = '0 1 2 3'
refinement = '3 2 1 0'
enable_neighbor_refinement = false
[]
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/radiation_transfer_symmetry/cavity_with_pillars.i)
#
# inner_left: 8
# inner_right: 9
# inner_top: 12
# inner_bottom: 11
# inner_front: 10
# back_2: 7
# obstruction: 6
#
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 3
dx = '0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.4'
dy = '0.5 0.75 0.5'
dz = '1.5 0.5'
subdomain_id = '
3 1 1 1 1 1 1 4
3 1 2 1 1 2 1 4
3 1 1 1 1 1 1 4
3 1 1 1 1 1 1 4
3 1 1 1 1 1 1 4
3 1 1 1 1 1 1 4
'
[]
[add_obstruction]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 1
new_boundary = obstruction
input = cartesian
[]
[add_new_back]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(z) < 1e-10'
included_subdomain_ids = '1'
normal = '0 0 -1'
new_sideset_name = back_2
input = add_obstruction
[]
[add_inner_left]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
new_boundary = inner_left
input = add_new_back
[]
[add_inner_right]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 4
paired_block = 1
new_boundary = inner_right
input = add_inner_left
[]
[add_inner_front]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(z - 2) < 1e-10'
included_subdomain_ids = '1'
normal = '0 0 1'
new_sideset_name = inner_front
input = add_inner_right
[]
[add_inner_bottom]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y) < 1e-10'
included_subdomain_ids = '1'
normal = '0 -1 0'
new_sideset_name = inner_bottom
input = add_inner_front
[]
[add_inner_top]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y - 1.75) < 1e-10'
included_subdomain_ids = '1'
normal = '0 1 0'
new_sideset_name = inner_top
input = add_inner_bottom
[]
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[temperature]
block = '2 3 4'
initial_condition = 300
[]
[]
[Kernels]
[conduction]
type = HeatConduction
variable = temperature
block = '2 3 4'
diffusion_coefficient = 1
[]
[source]
type = BodyForce
variable = temperature
value = 1000
block = '2'
[]
[]
[BCs]
[convective]
type = CoupledConvectiveHeatFluxBC
variable = temperature
T_infinity = 300
htc = 50
boundary = 'left right'
[]
[]
[GrayDiffuseRadiation]
[cavity]
boundary = '6 7 8 9 10 11 12'
emissivity = '1 1 1 1 1 1 1'
n_patches = '1 1 1 1 1 1 1'
adiabatic_boundary = '7 10 11 12'
partitioners = 'metis metis metis metis metis metis metis'
temperature = temperature
ray_tracing_face_order = SECOND
normalize_view_factor = false
[]
[]
[Postprocessors]
[Tpv]
type = PointValue
variable = temperature
point = '0.3 0.5 0.5'
[]
[volume]
type = VolumePostprocessor
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/mesh/boundary_subdomain_list/2D_9reg.i)
# Create a mesh that looks like:
# -------------
# | 7 | 6 | 5 |
# -------------
# | 8 | 0 | 4 |
# ------------
# | 1 | 2 | 3 |
# -------------
# Where there is an internal interface around block 0
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
dy = '1 1 1'
subdomain_id = '7 6 5
8 0 4
1 2 3'
[]
[interface]
type = SideSetsAroundSubdomainGenerator
input = mesh
block = 0
new_boundary = 'interface'
[]
uniform_refine = 5
[]
# Here we output all the connections as vectorpostprocessors
[VectorPostprocessors]
[interface]
type = SubdomainBoundaryConnectivity
boundary = interface
interface_boundary = true
[]
[interface_master]
type = SubdomainBoundaryConnectivity
boundary = interface
[]
[block_0]
type = SubdomainBoundaryConnectivity
block = 0
[]
[block_1]
type = SubdomainBoundaryConnectivity
block = 1
interface_boundary = true
[]
[block_2]
type = SubdomainBoundaryConnectivity
block = 2
interface_boundary = true
[]
[block_2_master]
type = SubdomainBoundaryConnectivity
block = 2
[]
[]
[Variables]
[u]
[]
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
kernel_coverage_check = false
[]
[Outputs]
exodus = false
csv = true
[]
(test/tests/functions/piecewise_constant_from_csv/piecewise_constant.i)
[Mesh]
allow_renumbering = false
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
ix = '2 1 1'
iy = '1 3'
subdomain_id = '0 1 1
2 2 2'
[]
[]
[Variables]
[u]
[]
[]
[UserObjects]
[reader_element]
type = PropertyReadFile
prop_file_name = 'data_element.csv'
read_type = 'element'
nprop = 3 # number of columns in CSV
[]
[reader_node]
type = PropertyReadFile
prop_file_name = 'data_node.csv'
read_type = 'node'
nprop = 3 # number of columns in CSV
[]
[reader_nearest]
type = PropertyReadFile
prop_file_name = 'data_nearest.csv'
read_type = 'voronoi'
nprop = 3
nvoronoi = 3
[]
[reader_block]
type = PropertyReadFile
prop_file_name = 'data_nearest.csv'
read_type = 'block'
nprop = 3
nblock = 3
[]
[]
[Functions]
[element]
type = PiecewiseConstantFromCSV
read_prop_user_object = 'reader_element'
read_type = 'element'
column_number = '2'
[]
[node]
type = PiecewiseConstantFromCSV
read_prop_user_object = 'reader_node'
read_type = 'node'
column_number = '2'
[]
[nearest]
type = PiecewiseConstantFromCSV
read_prop_user_object = 'reader_nearest'
read_type = 'voronoi'
column_number = '2'
[]
[block]
type = PiecewiseConstantFromCSV
read_prop_user_object = 'reader_block'
read_type = 'block'
column_number = '2'
[]
[]
[ICs]
active = 'element'
[element]
type = FunctionIC
variable = 'u'
function = 'element'
[]
[node]
type = FunctionIC
variable = 'u'
function = 'node'
[]
[nearest]
type = FunctionIC
variable = 'u'
function = 'nearest'
[]
[block]
type = FunctionIC
variable = 'u'
function = 'block'
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[]
[BCs]
[unity]
type = DirichletBC
variable = u
boundary = 'left bottom'
value = 1
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Transient
end_time = 0.1
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/plane_id_mesh_generator/plane_id_grid2d.i)
[Mesh]
[grid]
type = CartesianMeshGenerator
dim = 2
dx = '5.0 10.0 '
ix = '1 4'
dy = '5.0 10.0 '
iy = '1 4'
[]
[plane_id_gen]
type = PlaneIDMeshGenerator
input = 'grid'
plane_coordinates = '0.0 5.0 15.0'
num_ids_per_plane = ' 1 2'
plane_axis = 'x'
id_name = 'plane_id'
[]
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
[]
[AuxVariables]
[plane_id]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[set_plane_id]
type = ExtraElementIDAux
variable = plane_id
extra_id_name = plane_id
[]
[]
[Outputs]
exodus = true
execute_on = timestep_end
[]
(test/tests/meshgenerators/block_deletion_generator/block_deletion_test14.i)
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 2
dx = '4 2 3'
dy = '1 2'
ix = '10 10 10'
iy = '8 8'
subdomain_id = '1 2 3
2 2 2'
[]
[./ed0]
type = BlockDeletionGenerator
input = cmg
block = '1 3'
[../]
[]
[Variables]
[./u]
[../]
[]
[Kernels]
[./dt]
type = TimeDerivative
variable = u
[../]
[./diff]
type = Diffusion
variable = u
[../]
[]
[BCs]
[./top]
type = DirichletBC
variable = u
boundary = bottom
value = 1
[../]
[]
[Executioner]
type = Transient
start_time = 0
end_time = 10
dt = 10
solve_type = NEWTON
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/stochastic_tools/examples/surrogates/pod_rb/2d_multireg/sub.i)
halfa = 10
fulla = 20
[Problem]
type = FEProblem
extra_tag_vectors = 'diff0 diff1 diff2 diff3 abs0 abs1 abs2 abs3 src0 src1 src2'
[]
[Mesh]
[msh]
type = CartesianMeshGenerator
dim = 2
dx = '10 20 20 20 20 20 20 20 20'
dy = '10 20 20 20 20 20 20 20 20'
ix = '${halfa} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla}'
iy = '${halfa} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla} ${fulla}'
subdomain_id = '1 0 0 0 1 0 0 2 3
0 0 0 0 0 0 0 2 3
0 0 1 0 0 0 2 2 3
0 0 0 0 0 0 2 3 3
1 0 0 0 1 2 2 3 3
0 0 0 0 2 2 3 3 3
0 0 2 2 2 3 3 3 3
2 2 2 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3'
[]
[]
[Variables]
[psi]
[]
[]
[Kernels]
[diff0]
type = MatDiffusion
variable = psi
diffusivity = D0
extra_vector_tags = 'diff0'
block = 0
[]
[diff1]
type = MatDiffusion
variable = psi
diffusivity = D1
extra_vector_tags = 'diff1'
block = 1
[]
[diff2]
type = MatDiffusion
variable = psi
diffusivity = D2
extra_vector_tags = 'diff2'
block = 2
[]
[diff3]
type = MatDiffusion
variable = psi
diffusivity = D3
extra_vector_tags = 'diff3'
block = 3
[]
[abs0]
type = MaterialReaction
variable = psi
coefficient = absxs0
extra_vector_tags = 'abs0'
block = 0
[]
[abs1]
type = MaterialReaction
variable = psi
coefficient = absxs1
extra_vector_tags = 'abs1'
block = 1
[]
[abs2]
type = MaterialReaction
variable = psi
coefficient = absxs2
extra_vector_tags = 'abs2'
block = 2
[]
[abs3]
type = MaterialReaction
variable = psi
coefficient = absxs3
extra_vector_tags = 'abs3'
block = 3
[]
[src0]
type = BodyForce
variable = psi
value = 1
extra_vector_tags = 'src0'
block = 0
[]
[src1]
type = BodyForce
variable = psi
value = 1
extra_vector_tags = 'src1'
block = 1
[]
[src2]
type = BodyForce
variable = psi
value = 1
extra_vector_tags = 'src2'
block = 2
[]
[]
[Materials]
[D0]
type = GenericConstantMaterial
prop_names = D0
prop_values = 1
block = 0
[]
[D1]
type = GenericConstantMaterial
prop_names = D1
prop_values = 1
block = 1
[]
[D2]
type = GenericConstantMaterial
prop_names = D2
prop_values = 1
block = 2
[]
[D3]
type = GenericConstantMaterial
prop_names = D3
prop_values = 1
block = 3
[]
[absxs0]
type = GenericConstantMaterial
prop_names = absxs0
prop_values = 1
block = 0
[]
[absxs1]
type = GenericConstantMaterial
prop_names = absxs1
prop_values = 1
block = 1
[]
[absxs2]
type = GenericConstantMaterial
prop_names = absxs2
prop_values = 1
block = 2
[]
[absxs3]
type = GenericConstantMaterial
prop_names = absxs3
prop_values = 1
block = 3
[]
[]
[BCs]
[left]
type = NeumannBC
variable = psi
boundary = left
value = 0
[]
[bottom]
type = NeumannBC
variable = psi
boundary = bottom
value = 0
[]
[top]
type = DirichletBC
variable = psi
boundary = top
value = 0
[]
[right]
type = DirichletBC
variable = psi
boundary = right
value = 0
[]
[]
[Executioner]
type = Steady
solve_type = linear
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Controls]
[stochastic]
type = SamplerReceiver
[]
[]
[Postprocessors]
[nodal_l2]
type = NodalL2Norm
variable = psi
[]
[]
[Outputs]
[]
(test/tests/variables/caching_fv_variables/fv_caching.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
ix = '2 1 1'
iy = '2 3'
subdomain_id = '0 1 1 2 2 2'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[adv]
type = FVMatAdvection
variable = u
vel = v_mat
[]
[body_force]
type = FVBodyForce
variable = u
value = 10
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[right]
type = FVDirichletBC
variable = u
boundary = 'right'
value = 1
[]
[top]
type = FVNeumannBC
variable = u
value = 1
boundary = 'top'
[]
[]
[Materials]
[v_mat]
type = ADGenericVectorFunctorMaterial
prop_names = 'v_mat'
prop_values = '4 0 0'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_INSFV.i)
mu=1
rho=1
advected_interp_method='average'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
inactive = 'mesh internal_boundary_bot internal_boundary_top'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1'
dy = '1 1 1'
ix = '5'
iy = '5 5 5'
subdomain_id = '1
2
3'
[]
[internal_boundary_bot]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
new_boundary = 'internal_bot'
primary_block = 1
paired_block = 2
[]
[internal_boundary_top]
type = SideSetsBetweenSubdomainsGenerator
input = internal_boundary_bot
new_boundary = 'internal_top'
primary_block = 2
paired_block = 3
[]
[diverging_mesh]
type = FileMeshGenerator
file = 'expansion_quad.e'
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 0
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[temperature]
type = INSFVEnergyVariable
[]
[]
[AuxVariables]
[advected_density]
type = MooseVariableFVReal
initial_condition = ${rho}
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
force_boundary_execution = true
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
force_boundary_execution = true
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = temperature
advected_interp_method = 'upwind'
[]
[temp_source]
type = FVBodyForce
variable = temperature
function = 10
block = 1
[]
[]
[FVBCs]
inactive = 'noslip-u noslip-v'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = u
function = 0
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = v
function = 1
[]
[noslip-u]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = u
function = 0
[]
[noslip-v]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = v
function = 0
[]
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'right'
variable = u
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'right'
variable = v
momentum_component = 'y'
[]
[axis-u]
type = INSFVSymmetryVelocityBC
boundary = 'left'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[axis-v]
type = INSFVSymmetryVelocityBC
boundary = 'left'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[axis-p]
type = INSFVSymmetryPressureBC
boundary = 'left'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'top'
variable = pressure
function = 0
[]
[inlet_temp]
type = FVNeumannBC
boundary = 'bottom'
variable = temperature
value = 300
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
[]
[advected_material_property]
type = ADGenericFunctorMaterial
prop_names = 'advected_rho cp'
prop_values ='${rho} 1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Postprocessors]
[inlet_mass_variable]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = advected_density
[]
[inlet_mass_constant]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[inlet_mass_matprop]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = 'advected_rho'
[]
[mid1_mass]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[mid2_mass]
type = VolumetricFlowRate
boundary = internal_top
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[outlet_mass]
type = VolumetricFlowRate
boundary = top
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[inlet_momentum_x]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = u
[]
[inlet_momentum_y]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = v
[]
[mid1_advected_energy]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[mid2_advected_energy]
type = VolumetricFlowRate
boundary = internal_top
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[outlet_advected_energy]
type = VolumetricFlowRate
boundary = top
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_total_viscosity_material/steady-action.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 100
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '200'
iy = '10 1'
[]
[]
[Modules]
[NavierStokesFV]
compressibility = 'incompressible'
turbulence_handling = 'mixing-length'
density = ${rho}
dynamic_viscosity = ${mu}
initial_velocity = '1e-6 1e-6 0'
initial_pressure = 0.0
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_function = '1 0'
wall_boundaries = 'top bottom'
momentum_wall_types = 'wallfunction symmetry'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_function = '0'
von_karman_const = ${von_karman_const}
mixing_length_delta = 0.5
mixing_length_walls = 'top'
mixing_length_aux_execute_on ='initial'
momentum_advection_interpolation = 'upwind'
mass_advection_interpolation = 'upwind'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/transfers/multiapp_variable_value_sample_transfer/full_domain_primary.i)
[Mesh]
type = MeshGeneratorMesh
[cartesian_basic_mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.25 0.25 0.25 0.25'
ix = '1 1 1 1 '
dy = '0.25 0.25 0.25 0.25'
iy = '1 1 1 1'
subdomain_id = '1 2 2 2
1 1 2 2
1 1 2 2
1 1 1 2'
[]
[central_node]
type = ExtraNodesetGenerator
coord = '0.5 0.5'
input = cartesian_basic_mesh
new_boundary = 'central_node'
[]
[]
[Variables]
[to_subapp]
initial_condition = -1.0
[]
[]
[AuxKernels]
[discretize_to_subapp]
type = ParsedAux
variable = from_subapp_check
function = 'to_subapp'
args = 'to_subapp'
[]
[subapp_primary_diff]
type = ParsedAux
variable = subapp_primary_diff
function = 'from_subapp_check - from_subapp'
args = 'from_subapp_check from_subapp'
[]
[]
[AuxVariables]
[from_subapp]
family = MONOMIAL
order = CONSTANT
initial_condition = -2.0
[]
[from_subapp_check]
family = MONOMIAL
order = CONSTANT
initial_condition = -2.0
[]
[subapp_primary_diff]
family = MONOMIAL
order = CONSTANT
initial_condition = -2.0
[]
[array_var]
family = MONOMIAL
order = CONSTANT
components = 3
initial_condition = '-2 -1 0'
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = to_subapp
[]
[]
[BCs]
[edge]
type = DirichletBC
variable = to_subapp
boundary = 'top right left bottom'
value = 1
[]
[center]
type = DirichletBC
variable = to_subapp
boundary = 'central_node'
value = 0
[]
[]
[Executioner]
type = Transient
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
num_steps = 3
dt = 1.0
nl_abs_tol = 1e-13
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
[MultiApps]
[sub]
type = CentroidMultiApp
input_files = subapp.i
[]
[]
[Transfers]
[from_primary_to_sub_pp]
type = MultiAppVariableValueSamplePostprocessorTransfer
to_multi_app = sub
source_variable = to_subapp
postprocessor = from_primary_pp
[]
[primary_average]
type = MultiAppVariableValueSamplePostprocessorTransfer
from_multi_app = sub
source_variable = from_subapp
postprocessor = to_primary_pp
[]
[array_var]
type = MultiAppVariableValueSamplePostprocessorTransfer
from_multi_app = sub
source_variable = array_var
source_variable_component = 2
postprocessor = to_primary_pp
[]
[]
(modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_action.i)
[Problem]
kernel_coverage_check = false
[]
[Mesh]
type = MeshGeneratorMesh
[./cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1.3 1.9'
ix = '3 3 3'
dy = '2 1.2 0.9'
iy = '3 3 3'
subdomain_id = '0 1 0
4 5 2
0 3 0'
[../]
[./inner_bottom]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 1
paired_block = 5
new_boundary = 'inner_bottom'
[../]
[./inner_left]
type = SideSetsBetweenSubdomainsGenerator
input = inner_bottom
primary_block = 4
paired_block = 5
new_boundary = 'inner_left'
[../]
[./inner_right]
type = SideSetsBetweenSubdomainsGenerator
input = inner_left
primary_block = 2
paired_block = 5
new_boundary = 'inner_right'
[../]
[./inner_top]
type = SideSetsBetweenSubdomainsGenerator
input = inner_right
primary_block = 3
paired_block = 5
new_boundary = 'inner_top'
[../]
[./rename]
type = RenameBlockGenerator
old_block = '1 2 3 4'
new_block = '0 0 0 0'
input = inner_top
[../]
[]
[Variables]
[./temperature]
block = 0
[../]
[]
[Kernels]
[./heat_conduction]
type = HeatConduction
variable = temperature
block = 0
diffusion_coefficient = 5
[../]
[]
[GrayDiffuseRadiation]
[./cavity]
boundary = '4 5 6 7'
emissivity = '0.9 0.8 0.4 1'
n_patches = '2 2 2 3'
partitioners = 'centroid centroid centroid centroid'
centroid_partitioner_directions = 'x y y x'
temperature = temperature
adiabatic_boundary = '7'
fixed_temperature_boundary = '4'
fixed_boundary_temperatures = '1200'
view_factor_calculator = analytical
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = temperature
boundary = left
value = 600
[../]
[./right]
type = DirichletBC
variable = temperature
boundary = right
value = 300
[../]
[]
[Postprocessors]
[./average_T_inner_right]
type = SideAverageValue
variable = temperature
boundary = inner_right
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/parsed_generate_sideset/parsed_generate_sideset_neighbor_sub_id.i)
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '2 2'
subdomain_id = '0 1 0 0'
[../]
[sideset]
type = ParsedGenerateSideset
input = cmg
combinatorial_geometry = 'abs(x - 1) < 1e-6'
included_neighbor_ids = '1'
new_sideset_name = interior
[]
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/multiple_radiation_cavities/multiple_radiation_cavities.i)
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 4 1 4 0.5'
ix = '2 2 2 2 2'
dy = '0.3 10 1'
iy = '2 2 2'
subdomain_id = '1 2 3 4 5
6 7 8 9 10
11 12 13 14 15'
[]
[add_side_left_left]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 6
paired_block = 7
new_boundary = left_left
input = cartesian
[]
[add_side_left_bottom]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 7
new_boundary = left_bottom
input = add_side_left_left
[]
[add_side_left_right]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 8
paired_block = 7
new_boundary = left_right
input = add_side_left_bottom
[]
[add_side_left_top]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 12
paired_block = 7
new_boundary = left_top
input = add_side_left_right
[]
[add_side_right_left]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 8
paired_block = 9
new_boundary = right_left
input = add_side_left_top
[]
[add_side_right_bottom]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 4
paired_block = 9
new_boundary = right_bottom
input = add_side_right_left
[]
[add_side_right_right]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 10
paired_block = 9
new_boundary = right_right
input = add_side_right_bottom
[]
[add_side_right_top]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 14
paired_block = 9
new_boundary = right_top
input = add_side_right_right
[]
[]
[GrayDiffuseRadiation]
[left]
boundary = 'left_left left_right left_bottom left_top'
emissivity = '0.8 0.8 0.9 0.5'
n_patches = '2 2 2 2'
temperature = temperature
ray_tracing_face_order = SECOND
[]
[right]
boundary = 'right_left right_right right_bottom right_top'
emissivity = '0.8 0.8 0.9 0.5'
n_patches = '2 2 2 2'
temperature = temperature
ray_tracing_face_order = SECOND
[]
[]
[Variables]
[temperature]
block = '1 2 3 4 5 6 8 10 11 12 13 14 15'
initial_condition = 300
[]
[]
[Kernels]
[conduction]
type = HeatConduction
variable = temperature
diffusion_coefficient = 10
block = '1 2 3 4 5 6 8 10 11 12 13 14 15'
[]
[]
[BCs]
[bottom]
type = DirichletBC
variable = temperature
value = 300
boundary = bottom
[]
[top]
type = DirichletBC
variable = temperature
value = 400
boundary = top
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/2d-rc.i)
mu=1.1
rho=1.1
advected_interp_method='average'
velocity_interp_method='rc'
restricted_blocks = '1'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = ${restricted_blocks}
pressure = pressure
[]
[]
[Mesh]
parallel_type = 'replicated'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '7 7'
iy = 10
subdomain_id = '1 2'
[]
[mid]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
input = mesh
new_boundary = 'middle'
[]
[break_top]
type = PatchSidesetGenerator
boundary = 'top'
n_patches = 2
input = mid
[]
[break_bottom]
type = PatchSidesetGenerator
boundary = 'bottom'
n_patches = 2
input = break_top
[]
[]
[Problem]
kernel_coverage_check = false
fv_bcs_integrity_check = true
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[pressure]
type = INSFVPressureVariable
block = ${restricted_blocks}
[]
[temperature]
type = INSFVEnergyVariable
block = ${restricted_blocks}
[]
[scalar]
type = INSFVScalarFieldVariable
block = ${restricted_blocks}
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = temperature
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
coeff = 1.1
variable = temperature
[]
[energy_loss]
type = FVBodyForce
variable = temperature
value = -0.1
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
coeff = 1
variable = scalar
[]
[scalar_src]
type = FVBodyForce
variable = scalar
value = 0.1
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[top-wall-u]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = u
function = 0
[]
[top-wall-v]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = v
function = 0
[]
[bottom-wall-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = u
mu = ${mu}
u = u
v = v
momentum_component = 'x'
[]
[bottom-wall-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = v
mu = ${mu}
u = u
v = v
momentum_component = 'y'
[]
[bottom-wall-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom_0'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'middle'
variable = pressure
function = 0
[]
[inlet_t]
type = FVDirichletBC
boundary = 'left'
variable = temperature
value = 1
[]
[outlet_scalar]
type = FVDirichletBC
boundary = 'middle'
variable = scalar
value = 1
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
block = ${restricted_blocks}
[]
[const]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '2'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
(modules/thermal_hydraulics/test/tests/userobjects/layered_flow_area_change/layered_flow_area_2D.i)
[Mesh]
[generated]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
dy = '4'
ix = '1 1 1'
iy = '40'
subdomain_id = '1 2 1'
[]
[interior_walls]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
new_boundary = interior
input = generated
[]
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[u]
[]
[]
[AuxVariables]
[disp_x]
[]
[disp_y]
[]
[channel_dA]
[]
[]
[ICs]
[disp_x_ic]
type = FunctionIC
variable = disp_x
function = 'if (x < 1.5, 0.5 * (y - 2) * 0.1, 0)'
[]
[]
[AuxKernels]
[channel_dA_aux]
type = SpatialUserObjectAux
variable = channel_dA
user_object = layered_area_change
[]
[]
[UserObjects]
[layered_area_change]
type = LayeredFlowAreaChange
direction = y
displacements = 'disp_x disp_y'
boundary = interior
num_layers = 40
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/block_deletion_generator/block_deletion_not_prepared.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '4 2 3'
dy = '1 2'
ix = '10 10 10'
iy = '8 8'
subdomain_id = '1 2 3
2 2 2'
[]
[feg]
type = FancyExtruderGenerator
input = cmg
direction = '0 0 1'
heights = 1
num_layers = 1
[]
[bdg]
type = BlockDeletionGenerator
input = feg
block = '1 3'
new_boundary = 'new_external'
[]
[]
(test/tests/auxkernels/current_boundary_id/current_boundary_id.i)
#
# This is used to create the mesh but it does not work with --distributed-mesh flag
# and the parallel test bombs.
#
#[Mesh]
# type = MeshGeneratorMesh
#
# [./cartesian]
# type = CartesianMeshGenerator
# dim = 2
# dx = '1 1'
# ix = '10 10'
# dy = '1'
# iy = '10'
# subdomain_id = '1 2'
# [../]
#
# [./interior_bc]
# type = SideSetsBetweenSubdomainsGenerator
# primary_block = 1
# paired_block = 2
# new_boundary = 12
# input = cartesian
# [../]
#[]
[Mesh]
type = FileMesh
file = current_boundary_id_in.e
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[./u]
[../]
[]
[Executioner]
type = Steady
[]
[AuxVariables]
[./id1]
family = MONOMIAL
order = CONSTANT
[]
[./id2]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[./id1]
type = BIDAux
variable = id1
boundary = 'top'
[../]
[./id2]
type = BIDAux
variable = id2
boundary = '12'
[../]
[]
[Outputs]
exodus = true
[]
(modules/phase_field/test/tests/initial_conditions/BlockRestriction.i)
[Mesh]
[two_blocks]
type = CartesianMeshGenerator
dim = 2
dx = '1.5 2.4'
dy = '1.3'
ix = '5 5'
iy = '5'
subdomain_id = '0 1'
[]
[]
[Variables]
[bicrystal0_0]
[]
[bicrystal0_1]
[]
[bicrystal1_0]
[]
[bicrystal1_1]
[]
[tricrystal_0]
[]
[tricrystal_1]
[]
[tricrystal_2]
[]
[PolycrystalVariables]
var_name_base = 'coloring_'
op_num = 8
[]
[random_0]
[]
[random_1]
[]
[voronoi_0]
[]
[voronoi_1]
[]
[voronoi_2]
[]
[voronoi_3]
[]
[voronoi_4]
[]
[voronoi_5]
[]
[voronoi_6]
[]
[voronoi_7]
[]
[]
[ICs]
[PolycrystalICs]
[BicrystalBoundingBoxIC]
block = '0'
var_name_base = 'bicrystal0_'
op_num = 2
x1 = 0
x2 = 1
y1 = 0
y2 = 1
[]
[BicrystalCircleGrainIC]
block = '0'
var_name_base = 'bicrystal1_'
op_num = 2
x = 2.7
y = 0.6
radius = 2
[]
[Tricrystal2CircleGrainsIC]
block = '0'
var_name_base = 'tricrystal_'
op_num = 3
[]
[PolycrystalColoringIC]
block = '0'
polycrystal_ic_uo = hex_ic
var_name_base = 'coloring_'
op_num = 8
[]
[PolycrystalRandomIC]
block = '0'
var_name_base = 'random_'
op_num = 2
random_type = 'continuous'
[]
[PolycrystalVoronoiVoidIC]
polycrystal_ic_uo = voronoi
block = '0'
numbub = 3
bubspac = 0.02
radius = 0.05
invalue = 1
outvalue = 0.1
var_name_base = 'voronoi_'
op_num = 8
[]
[]
[]
[UserObjects]
[voronoi]
type = PolycrystalVoronoi
rand_seed = 10
int_width = 0
var_name_base = 'voronoi_'
op_num = 8
grain_num = 4
[]
[hex_ic]
type = PolycrystalHex
coloring_algorithm = bt
var_name_base = 'coloring_'
op_num = 8
grain_num = 4
[]
[]
[Problem]
type = FEProblem
solve = false
[]
[Executioner]
type = Transient
num_steps = 0
[]
[Outputs]
exodus = true
[]
(test/tests/auxkernels/volume_aux/side.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1'
dy = '0.5 1.2'
ix = '1'
iy = '4 6'
[]
[]
[AuxVariables/volume]
order = CONSTANT
family = MONOMIAL
[]
[AuxKernels/volume_aux]
type = VolumeAux
variable = volume
boundary = right
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_action_external_boundary_ray_tracing.i)
[Problem]
kernel_coverage_check = false
[]
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1.3 1.9'
ix = '3 3 3'
dy = '6'
iy = '9'
subdomain_id = '0 1 2'
[]
[inner_left]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 0
paired_block = 1
new_boundary = 'inner_left'
[]
[inner_right]
type = SideSetsBetweenSubdomainsGenerator
input = inner_left
primary_block = 2
paired_block = 1
new_boundary = 'inner_right'
[]
[inner_top]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y - 6) < 1e-10'
normal = '0 1 0'
included_subdomain_ids = 1
new_sideset_name = 'inner_top'
input = 'inner_right'
[]
[inner_bottom]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y) < 1e-10'
normal = '0 -1 0'
included_subdomain_ids = 1
new_sideset_name = 'inner_bottom'
input = 'inner_top'
[]
[rename]
type = RenameBlockGenerator
old_block = '2'
new_block = '0'
input = inner_bottom
[]
[]
[Variables]
[temperature]
block = 0
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temperature
block = 0
diffusion_coefficient = 5
[]
[]
[GrayDiffuseRadiation]
[cavity]
boundary = '4 5 6 7'
emissivity = '0.9 0.8 0.4 1'
n_patches = '2 2 2 3'
partitioners = 'centroid centroid centroid centroid'
centroid_partitioner_directions = 'x y y x'
temperature = temperature
adiabatic_boundary = '7'
fixed_temperature_boundary = '6'
fixed_boundary_temperatures = '800'
view_factor_calculator = ray_tracing
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temperature
boundary = left
value = 1000
[]
[right]
type = DirichletBC
variable = temperature
boundary = right
value = 300
[]
[]
[Postprocessors]
[average_T_inner_right]
type = SideAverageValue
variable = temperature
boundary = inner_right
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '5 5'
dy = '1.0'
ix = '50 50'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'T_solid'
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
[]
[]
[AuxVariables]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'solid_energy_diffusion solid_energy_convection'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
k = ${k}
variable = T_fluid
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[solid_energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_solid
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
inactive = 'heated-side'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = ${fparse u_inlet * rho * cp * T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = 150
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[Materials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '1'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-14
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/heat_conduction/test/tests/radiation_transfer_action/cavity_with_pillar_vf.i)
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 3
dx = '0.1 0.3 0.4 0.3 0.1'
ix = ' 1 3 4 3 1'
dy = '0.1 0.3 0.4 0.3 0.1'
iy = ' 1 3 4 3 1'
dz = '0.1 0.8 0.2 0.1'
iz = ' 1 8 2 1'
subdomain_id = '1 1 1 1 1
1 15 15 15 1
1 15 1 15 1
1 15 15 15 1
1 1 1 1 1
1 12 12 12 1
11 0 103 0 14
11 104 2 102 14
11 0 101 0 14
1 13 13 13 1
1 12 12 12 1
11 0 0 0 14
11 0 105 0 14
11 0 0 0 14
1 13 13 13 1
1 1 1 1 1
1 16 16 16 1
1 16 16 16 1
1 16 16 16 1
1 1 1 1 1'
[]
[left_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 11
paired_block = '0 101 102 103 104 105'
new_boundary = left_interior_wall
input = cartesian
[]
[right_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 14
paired_block = '0 101 102 103 104 105'
new_boundary = right_interior_wall
input = left_interior
[]
[bottom_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 12
paired_block = '0 101 102 103 104 105'
new_boundary = bottom_interior_wall
input = right_interior
[]
[top_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 13
paired_block = '0 101 102 103 104 105'
new_boundary = top_interior_wall
input = bottom_interior
[]
[front_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 15
paired_block = '0 101 102 103 104 105'
new_boundary = front_interior_wall
input = top_interior
[]
[back_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 16
paired_block = '0 101 102 103 104 105'
new_boundary = back_interior_wall
input = front_interior
[]
[pillar_left]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 104
new_boundary = pillar_left
input = 'back_interior'
[]
[pillar_right]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 102
new_boundary = pillar_right
input = 'pillar_left'
[]
[pillar_bottom]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 103
new_boundary = pillar_bottom
input = 'pillar_right'
[]
[pillar_top]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 101
new_boundary = pillar_top
input = 'pillar_bottom'
[]
[pillar_back]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 105
new_boundary = pillar_back
input = 'pillar_top'
[]
[rename_block]
type = RenameBlockGenerator
old_block = '2 11 12 13 14 15 16 101 102 103 104 105'
new_block = '2 1 1 1 1 1 1 0 0 0 0 0'
input = 'pillar_back'
[]
[]
[GrayDiffuseRadiation]
[cavity]
sidesets = '6 7 8 9 10 11 12 13 14 15 16'
emissivity = '0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8'
n_patches = '5 5 5 5 5 5 5 5 5 5 5'
partitioners = 'metis metis metis metis metis metis metis metis metis metis metis'
temperature = temperature
ray_tracing_face_order = SECOND
[]
[]
[Variables]
[temperature]
initial_condition = 300
block = '1 2'
[]
[]
[Kernels]
[hc]
type = HeatConduction
variable = temperature
block = '1 2'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temperature
boundary = left
value = 500
[]
[front]
type = DirichletBC
variable = temperature
boundary = front
value = 300
[]
[]
[Materials]
[hcmat]
type = HeatConductionMaterial
thermal_conductivity = 25.0
specific_heat = 490.0
block = '1 2'
[]
[density]
type = GenericConstantMaterial
prop_names = 'density'
prop_values = '80'
block = '1 2'
[]
[]
[Executioner]
type = Steady
nl_abs_tol = 1e-8
nl_rel_tol = 1e-8
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_cavity.i)
mu = 1
rho = 1
k = .01
cp = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 0.5'
dy = '1'
ix = '8 5'
iy = '8'
subdomain_id = '0 1'
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'cmg'
primary_block = 0
paired_block = 1
new_boundary = 'interface'
[]
[secondary_interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'interface'
primary_block = 1
paired_block = 0
new_boundary = 'secondary_interface'
[]
[]
[GlobalParams]
# retain behavior at time of test creation
two_term_boundary_expansion = false
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = 0
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
block = 0
[]
[v]
type = INSFVVelocityVariable
block = 0
[]
[pressure]
type = INSFVPressureVariable
block = 0
[]
[T]
type = INSFVEnergyVariable
block = 0
[]
[Ts]
type = INSFVEnergyVariable
block = 1
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[ICs]
[T]
type = ConstantIC
variable = T
value = 1
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
block = 0
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
block = 0
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
block = 0
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
block = 0
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
block = 0
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
block = 0
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
block = 0
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
block = 0
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
block = 0
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
block = 0
[]
[solid_temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = Ts
block = 1
[]
[]
[FVInterfaceKernels]
[convection]
type = FVConvectionCorrelationInterface
variable1 = T
variable2 = Ts
boundary = 'interface'
h = 5
temp_solid = Ts
temp_fluid = T
subdomain1 = 0
subdomain2 = 1
bulk_distance = 0.3
[]
[]
[FVBCs]
[top_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top'
function = 'lid_function'
[]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left interface bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left interface top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = 'bottom'
value = 1
[]
[T_cold]
type = FVDirichletBC
variable = Ts
boundary = 'right'
value = 0
[]
[]
[Materials]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
block = 0
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
l_max_its = 200
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_eddy_viscosity_aux/mixing_length_eddy_viscosity.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 13700
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
advected_interp_method='upwind'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '100'
iy = '10 1'
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[mixing_len]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_shear_stress]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_yplus]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[eddy_viscosity]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = u
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = u
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'x'
u = u
v = v
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = v
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'y'
u = u
v = v
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[]
[AuxKernels]
[mixing_len]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_len
execute_on = 'initial'
von_karman_const = ${von_karman_const}
delta = 0.5
[]
[turbulent_viscosity]
type = INSFVMixingLengthTurbulentViscosityAux
variable = eddy_viscosity
mixing_length = mixing_len
u = u
v = v
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = '0'
[]
[wall-u]
type = INSFVWallFunctionBC
variable = u
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = x
[]
[wall-v]
type = INSFVWallFunctionBC
variable = v
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = y
[]
[sym-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[sym-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[symmetry_pressure]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '0'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[TimeStepper]
type = IterationAdaptiveDT
optimal_iterations = 6
dt = 1e-3
[]
nl_abs_tol = 1e-8
end_time = 1e9
[]
[Outputs]
[out]
type = Exodus
execute_on = 'final'
[]
[]
(test/tests/meshgenerators/move_node_generator/test2.i)
[Mesh]
allow_renumbering=false
inactive = 'missingNode mismatchSize'
[./eg]
type = CartesianMeshGenerator
dim = 3
dx = '1'
dy = '1'
dz = '1'
ix = '4'
iy = '4'
iz = '4'
subdomain_id = '0'
[]
[modifyNode]
type = MoveNodeGenerator
input = eg
node_id = '0 1 2'
new_position = '0.1 0 0
0.35 0 0
0.6 0 0'
[]
[missingNode]
type = MoveNodeGenerator
input = eg
node_id = '999'
new_position = '0.1 0 0'
[]
[mismatchSize]
type = MoveNodeGenerator
input = eg
node_id = '0 1 2'
new_position = '0.1 0 0'
[]
[]
[Variables]
[u]
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/exceptions/bad-restriction.i)
mu=1.1
rho=1.1
advected_interp_method='average'
velocity_interp_method='rc'
restricted_blocks = '1'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = '1 2'
pressure = pressure
[]
[]
[Mesh]
parallel_type = 'replicated'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '7 7'
iy = 10
subdomain_id = '1 2'
[]
[mid]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
input = mesh
new_boundary = 'middle'
[]
[break_top]
type = PatchSidesetGenerator
boundary = 'top'
n_patches = 2
input = mid
[]
[break_bottom]
type = PatchSidesetGenerator
boundary = 'bottom'
n_patches = 2
input = break_top
[]
[]
[Problem]
kernel_coverage_check = false
fv_bcs_integrity_check = true
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[pressure]
type = INSFVPressureVariable
block = ${restricted_blocks}
[]
[temperature]
type = INSFVEnergyVariable
block = ${restricted_blocks}
[]
[scalar]
type = INSFVScalarFieldVariable
block = ${restricted_blocks}
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = temperature
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
coeff = 1.1
variable = temperature
[]
[energy_loss]
type = FVBodyForce
variable = temperature
value = -0.1
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
coeff = 1
variable = scalar
[]
[scalar_src]
type = FVBodyForce
variable = scalar
value = 0.1
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[top-wall-u]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = u
function = 0
[]
[top-wall-v]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = v
function = 0
[]
[bottom-wall-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = u
mu = ${mu}
u = u
v = v
momentum_component = 'x'
[]
[bottom-wall-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = v
mu = ${mu}
u = u
v = v
momentum_component = 'y'
[]
[bottom-wall-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom_0'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'middle'
variable = pressure
function = 0
[]
[inlet_t]
type = FVDirichletBC
boundary = 'left'
variable = temperature
value = 1
[]
[outlet_scalar]
type = FVDirichletBC
boundary = 'middle'
variable = scalar
value = 1
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
block = ${restricted_blocks}
[]
[const]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '2'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_eddy_viscosity_aux/steady.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 100
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
advected_interp_method='upwind'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '200'
iy = '10 1'
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[mixing_len]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_shear_stress]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_yplus]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[eddy_viscosity]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = u
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'x'
u = u
v = v
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = v
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'y'
u = u
v = v
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[]
[AuxKernels]
[mixing_len]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_len
execute_on = 'initial'
von_karman_const = ${von_karman_const}
delta = 0.5
[]
[turbulent_viscosity]
type = INSFVMixingLengthTurbulentViscosityAux
variable = eddy_viscosity
mixing_length = mixing_len
u = u
v = v
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = '0'
[]
[wall-u]
type = INSFVWallFunctionBC
variable = u
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = x
[]
[wall-v]
type = INSFVWallFunctionBC
variable = v
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = y
[]
[sym-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[sym-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[symmetry_pressure]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '0'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(modules/ray_tracing/test/tests/raykernels/errors/raykernel_errors.i)
[Mesh]
active = 'gmg'
[gmg]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5'
ix = '1 1'
subdomain_id = '0 1'
[]
[internal]
type = SideSetsBetweenSubdomainsGenerator
input = gmg
primary_block = 1
paired_block = 0
new_boundary = internal
[]
[]
[UserObjects]
active = 'study'
[study]
type = RepeatableRayStudy
start_points = '0 0 0'
directions = '1 0 0'
names = 'ray'
execute_on = INITIAL
ray_kernel_coverage_check = false
[]
[end_study]
type = RepeatableRayStudy
start_points = '0 0 0'
end_points = '0.25 0 0'
names = 'ray'
execute_on = INITIAL
ray_kernel_coverage_check = false
[]
[]
[RayKernels]
active = ''
[kill]
type = KillRayKernel
[]
[change_after_kill]
type = ChangeRayRayKernelTest
change_start_direction = true
depends_on = kill
[]
[change]
type = ChangeRayRayKernelTest
change_start_direction = true
[]
[change_again]
type = ChangeRayRayKernelTest
change_start_direction = true
[]
[change_out_of_elem]
type = ChangeRayRayKernelTest
change_start_out_of_elem = true
[]
[change_zero]
type = ChangeRayRayKernelTest
change_direction_zero = true
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
(modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_INSFE.i)
[Mesh]
second_order = true
inactive = 'mesh internal_boundary_bot internal_boundary_top'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1'
dy = '1 1 1'
ix = '5'
iy = '5 5 5'
subdomain_id = '1
2
3'
[]
[internal_boundary_bot]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
new_boundary = 'internal_bot'
primary_block = 1
paired_block = 2
[]
[internal_boundary_top]
type = SideSetsBetweenSubdomainsGenerator
input = internal_boundary_bot
new_boundary = 'internal_top'
primary_block = 2
paired_block = 3
[]
[diverging_mesh]
type = FileMeshGenerator
file = 'expansion_quad.e'
[]
[]
[Modules]
[IncompressibleNavierStokes]
equation_type = steady-state
# no slip BCs
velocity_boundary = 'bottom right left'
velocity_function = '0 1 0 0 0 0'
pressure_boundary = 'top'
pressure_function = '1'
density_name = rho
dynamic_viscosity_name = mu
integrate_p_by_parts = false
order = SECOND
[]
[]
[Materials]
[const]
type = GenericConstantMaterial
block = '1 2 3'
prop_names = 'rho mu'
prop_values = '1 1'
[]
[ADconst]
type = ADGenericFunctorMaterial
block = '1 2 3'
prop_names = 'rho_ad'
prop_values = '1'
[]
[]
[Preconditioning]
[SMP_PJFNK]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-ksp_gmres_restart -pc_type -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = '300 bjacobi ilu 4'
line_search = none
nl_rel_tol = 1e-12
nl_max_its = 6
l_tol = 1e-6
l_max_its = 300
[]
[Postprocessors]
[inlet_mass_constant]
type = VolumetricFlowRate
boundary = bottom
vel_x = vel_x
vel_y = vel_y
advected_variable = 1
[]
[inlet_mass_matprop]
type = VolumetricFlowRate
boundary = bottom
vel_x = vel_x
vel_y = vel_y
advected_mat_prop = 'rho_ad'
[]
[mid1_mass]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = vel_x
vel_y = vel_y
[]
[other_mid1_mass]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = vel_x
vel_y = vel_y
advected_mat_prop = 'rho_ad'
[]
[mid2_mass]
type = VolumetricFlowRate
boundary = internal_top
vel_x = vel_x
vel_y = vel_y
[]
[outlet_mass]
type = VolumetricFlowRate
boundary = top
vel_x = vel_x
vel_y = vel_y
[]
[inlet_momentum_x]
type = VolumetricFlowRate
boundary = bottom
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_x
[]
[mid1_momentum_x]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_x
[]
[mid2_momentum_x]
type = VolumetricFlowRate
boundary = internal_top
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_x
[]
[outlet_momentum_x]
type = VolumetricFlowRate
boundary = top
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_x
[]
[inlet_momentum_y]
type = VolumetricFlowRate
boundary = bottom
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_y
[]
[mid1_momentum_y]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_y
[]
[mid2_momentum_y]
type = VolumetricFlowRate
boundary = internal_top
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_y
[]
[outlet_momentum_y]
type = VolumetricFlowRate
boundary = top
vel_x = vel_x
vel_y = vel_y
advected_variable = vel_y
[]
[]
[Outputs]
exodus = false
csv = true
inactive = 'console_mass console_momentum_x console_momentum_y'
[console_mass]
type = Console
start_step = 1
show = 'inlet_mass_variable inlet_mass_constant inlet_mass_matprop mid1_mass mid2_mass outlet_mass'
[]
[console_momentum_x]
type = Console
start_step = 1
show = 'inlet_momentum_x mid1_momentum_x mid2_momentum_x outlet_momentum_x'
[]
[console_momentum_y]
type = Console
start_step = 1
show = 'inlet_momentum_y mid1_momentum_y mid2_momentum_y outlet_momentum_y'
[]
[]
(modules/heat_conduction/test/tests/radiation_transfer_symmetry/cavity_with_pillars_symmetry_bc.i)
#
# inner_left: 8
# inner_top: 11
# inner_bottom: 10
# inner_front: 9
# back_2: 7
# obstruction: 6
#
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 3
dx = '0.4 0.5 0.5 0.5'
dy = '0.5 0.75 0.5'
dz = '1.5 0.5'
subdomain_id = '
3 1 1 1
3 1 2 1
3 1 1 1
3 1 1 1
3 1 1 1
3 1 1 1
'
[]
[add_obstruction]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 1
new_boundary = obstruction
input = cartesian
[]
[add_new_back]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(z) < 1e-10'
included_subdomain_ids = '1'
normal = '0 0 -1'
new_sideset_name = back_2
input = add_obstruction
[]
[add_inner_left]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
new_boundary = inner_left
input = add_new_back
[]
[add_inner_front]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(z - 2) < 1e-10'
included_subdomain_ids = '1'
normal = '0 0 1'
new_sideset_name = inner_front
input = add_inner_left
[]
[add_inner_bottom]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y) < 1e-10'
included_subdomain_ids = '1'
normal = '0 -1 0'
new_sideset_name = inner_bottom
input = add_inner_front
[]
[add_inner_top]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y - 1.75) < 1e-10'
included_subdomain_ids = '1'
normal = '0 1 0'
new_sideset_name = inner_top
input = add_inner_bottom
[]
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[temperature]
block = '2 3'
initial_condition = 300
[]
[]
[Kernels]
[conduction]
type = HeatConduction
variable = temperature
block = '2 3'
diffusion_coefficient = 1
[]
[source]
type = BodyForce
variable = temperature
value = 1000
block = '2'
[]
[]
[BCs]
[convective]
type = CoupledConvectiveHeatFluxBC
variable = temperature
T_infinity = 300
htc = 50
boundary = 'left'
[]
[]
[GrayDiffuseRadiation]
[./cavity]
boundary = '6 7 8 9 10 11'
emissivity = '1 1 1 1 1 1'
n_patches = '1 1 1 1 1 1'
adiabatic_boundary = '7 9 10 11'
symmetry_boundary = '2'
partitioners = 'metis metis metis metis metis metis'
temperature = temperature
ray_tracing_face_order = SECOND
normalize_view_factor = false
[../]
[]
[Postprocessors]
[Tpv]
type = PointValue
variable = temperature
point = '0.3 0.5 0.5'
[]
[volume]
type = VolumePostprocessor
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/view_factors_symmetry/cavity_with_pillars.i)
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 3
dx = '0.5 0.5 0.5 0.5 0.5 0.5'
dy = '0.5 0.75 0.5'
dz = '1.5 0.5'
subdomain_id = '
1 1 1 1 1 1
1 2 1 1 2 1
1 1 1 1 1 1
1 1 1 1 1 1
1 1 1 1 1 1
1 1 1 1 1 1
'
[]
[add_obstruction]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 1
new_boundary = obstruction
input = cartesian
[]
[add_new_back]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(z) < 1e-10'
included_subdomain_ids = '1'
normal = '0 0 -1'
new_sideset_name = back_2
input = add_obstruction
[]
[]
[UserObjects]
[view_factor_study]
type = ViewFactorRayStudy
execute_on = initial
boundary = 'left right top bottom front back_2 obstruction'
face_order = FOURTH
[]
[view_factor]
type = RayTracingViewFactor
boundary = 'left right top bottom front back_2 obstruction'
execute_on = INITIAL
normalize_view_factor = false
ray_study_name = view_factor_study
[]
[]
[RayBCs/viewfactor]
type = ViewFactorRayBC
boundary = 'left right top bottom front back_2 obstruction'
[]
[Postprocessors]
[left_right]
type = ViewFactorPP
from_boundary = left
to_boundary = right
view_factor_object_name = view_factor
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Outputs]
csv = true
[]
(test/tests/meshgenerators/refine_sideset_generator/test_secondary.i)
[Mesh]
[eg]
type = CartesianMeshGenerator
dim = 3
dx = '2 1 1'
dy = '2 3'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1 1
1 2 0 1
0 1 1 1
2 2 2 2
3 3 1 3
1 1 1 1'
[]
[sideset]
type = SideSetsBetweenSubdomainsGenerator
input = eg
primary_block = 1
paired_block = 2
new_boundary = sideset_1
[]
[refine]
type = RefineSidesetGenerator
input = sideset
boundaries = 'sideset_1'
refinement = '2'
boundary_side = 'secondary'
enable_neighbor_refinement = false
[]
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/wall_distance_capped_mixing_length_aux/capped_mixing_length.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 13700
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
advected_interp_method='upwind'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '100'
iy = '10 1'
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[mixing_len]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_shear_stress]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_yplus]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = u
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = u
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'x'
u = u
v = v
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = v
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'y'
u = u
v = v
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[]
[AuxKernels]
[mixing_len]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_len
execute_on = 'initial'
von_karman_const = ${von_karman_const}
delta = 0.5
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = '0'
[]
[wall-u]
type = INSFVWallFunctionBC
variable = u
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = x
[]
[wall-v]
type = INSFVWallFunctionBC
variable = v
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = y
[]
[sym-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[sym-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[symmetry_pressure]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '0'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[TimeStepper]
type = IterationAdaptiveDT
optimal_iterations = 6
dt = 1e-3
[]
nl_abs_tol = 1e-8
end_time = 1e9
[]
[Outputs]
[out]
type = Exodus
execute_on = 'final'
[]
[]
(test/tests/meshgenerators/rename_block_generator/rename_block.i)
[Mesh]
[gmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1 1'
ix = '2 2'
iy = '2 2'
subdomain_id = '0 1 2 3'
[]
[set_names]
type = RenameBlockGenerator
old_block = '0 1 2 3'
new_block = 'block0 block1 block2 block3'
input = gmg
[]
# Rename parameters supplied through the "tests" specifications
[rename]
type = RenameBlockGenerator
input = set_names
[]
# We compare by element numbers, which are not consistent in parallel
# if this is true
allow_renumbering = false
[]
[Reporters/mesh_info]
type = MeshInfo
items = subdomain_elems
[]
[Outputs/out]
type = JSON
execute_system_information_on = NONE
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
(modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_action_external_boundary.i)
[Problem]
kernel_coverage_check = false
[]
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1.3 1.9'
ix = '3 3 3'
dy = '6'
iy = '9'
subdomain_id = '0 1 2'
[../]
[./inner_left]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 0
paired_block = 1
new_boundary = 'inner_left'
[../]
[./inner_right]
type = SideSetsBetweenSubdomainsGenerator
input = inner_left
primary_block = 2
paired_block = 1
new_boundary = 'inner_right'
[../]
[./inner_top]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y - 6) < 1e-10'
normal = '0 1 0'
included_subdomain_ids = 1
new_sideset_name = 'inner_top'
input = 'inner_right'
[../]
[./inner_bottom]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(y) < 1e-10'
normal = '0 -1 0'
included_subdomain_ids = 1
new_sideset_name = 'inner_bottom'
input = 'inner_top'
[../]
[./rename]
type = RenameBlockGenerator
old_block = '2'
new_block = '0'
input = inner_bottom
[../]
[]
[Variables]
[./temperature]
block = 0
[../]
[]
[Kernels]
[./heat_conduction]
type = HeatConduction
variable = temperature
block = 0
diffusion_coefficient = 5
[../]
[]
[GrayDiffuseRadiation]
[./cavity]
boundary = '4 5 6 7'
emissivity = '0.9 0.8 0.4 1'
n_patches = '2 2 2 3'
partitioners = 'centroid centroid centroid centroid'
centroid_partitioner_directions = 'x y y x'
temperature = temperature
adiabatic_boundary = '7'
fixed_temperature_boundary = '6'
fixed_boundary_temperatures = '800'
view_factor_calculator = analytical
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = temperature
boundary = left
value = 1000
[../]
[./right]
type = DirichletBC
variable = temperature
boundary = right
value = 300
[../]
[]
[Postprocessors]
[./average_T_inner_right]
type = SideAverageValue
variable = temperature
boundary = inner_right
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(modules/geochemistry/test/tests/nodal_void_volume/nodal_void_volume_adaptive.i)
# Computes nodal void volume, when using adaptivity, and compares with the Postprocessor hand-calculated values
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 2 2'
dy = '1 4'
[]
[]
[Adaptivity]
initial_marker = u_marker
marker = u_marker
max_h_level = 1
[Markers]
[u_marker]
type = ValueRangeMarker
variable = u
invert = true
lower_bound = 0.02
upper_bound = 0.98
[]
[]
[]
[Variables]
[u]
[]
[]
[ICs]
[u]
type = FunctionIC
variable = u
function = 'if(x<2,0,1)'
[]
[]
[Kernels]
[dot]
type = TimeDerivative
variable = u
[]
[u]
type = Diffusion
variable = u
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 2
[]
[Outputs]
csv = true
[]
[UserObjects]
[nodal_void_volume]
type = NodalVoidVolume
porosity = porosity
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[vol]
[]
[]
[AuxKernels]
[porosity]
type = FunctionAux
variable = porosity
function = 'if(x<4, 1, 2)'
[]
[vol]
type = NodalVoidVolumeAux
variable = vol
nodal_void_volume_uo = nodal_void_volume
[]
[]
[Postprocessors]
[quarter]
type = PointValue
point = '0 0 0'
variable = vol
[]
[half]
type = PointValue
point = '1 0 0'
variable = vol
[]
[three_quarters]
type = PointValue
point = '2 0 0'
variable = vol
[]
[one_and_half_to_34s]
type = PointValue
point = '4 0 0'
variable = vol
[]
[one_to_14]
type = PointValue
point = '6 0 0'
variable = vol
[]
[one_and_quarter]
type = PointValue
point = '0 1 0'
variable = vol
[]
[two_and_half]
type = PointValue
point = '1 1 0'
variable = vol
[]
[three_and_three_quarters]
type = PointValue
point = '2 1 0'
variable = vol
[]
[seven_and_half_to_334]
type = PointValue
point = '4 1 0'
variable = vol
[]
[five_to_54]
type = PointValue
point = '6 1 0'
variable = vol
[]
[]
(modules/heat_conduction/test/tests/view_factors_symmetry/cavity_with_pillars_symmetry_bc.i)
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 3
dx = '0.5 0.5 0.5'
dy = '0.5 0.75 0.5'
dz = '1.5 0.5'
subdomain_id = '1 1 1
1 2 1
1 1 1
1 1 1
1 1 1
1 1 1'
[]
[add_obstruction]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 2
paired_block = 1
new_boundary = obstruction
input = cartesian
[]
[add_new_back]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(z) < 1e-10'
included_subdomain_ids = '1'
normal = '0 0 -1'
new_sideset_name = back_2
input = add_obstruction
[]
[]
[UserObjects]
[view_factor_study]
type = ViewFactorRayStudy
execute_on = initial
boundary = 'left top bottom front back_2 obstruction'
face_order = FOURTH
[]
[view_factor]
type = RayTracingViewFactor
boundary = 'left top bottom front back_2 obstruction'
execute_on = INITIAL
normalize_view_factor = false
ray_study_name = view_factor_study
[]
[]
[RayBCs]
[vf_bc]
type = ViewFactorRayBC
boundary = 'left top bottom front back_2 obstruction'
[]
[symmetry]
type = ReflectRayBC
boundary = 'right'
[]
[]
[Postprocessors]
[left_left]
type = ViewFactorPP
from_boundary = left
to_boundary = left
view_factor_object_name = view_factor
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Outputs]
csv = true
[]
(test/tests/vectorpostprocessors/side_value_sampler/side_value_sampler.i)
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '0.5 0.5'
dy = '1'
ix = '5 5'
iy = '10'
subdomain_id = '1 1'
[]
# Limited to 1 side to avoid inconsistencies in parallel
[internal_sideset]
type = ParsedGenerateSideset
combinatorial_geometry = 'y<0.51 & y>0.49 & x<0.11'
new_sideset_name = 'center'
input = 'mesh'
[]
# this keeps numbering continuous so tests dont fail on different ids in CSV
allow_renumbering = false
[]
[Variables]
[u]
[]
[v]
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[diff_v]
type = Diffusion
variable = v
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 1
[]
[left_v]
type = DirichletBC
variable = v
boundary = left
value = 1
[]
[right_v]
type = DirichletBC
variable = v
boundary = right
value = 0
[]
[]
[VectorPostprocessors]
inactive = 'internal_sample'
[side_sample]
type = SideValueSampler
variable = 'u v'
boundary = top
sort_by = x
[]
[internal_sample]
type = SideValueSampler
variable = 'u v'
boundary = center
sort_by = 'id'
[]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
[vpp_csv]
type = CSV
[]
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mixing_length_total_viscosity_material/mixing_length_total_viscosity.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 13700
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
advected_interp_method='upwind'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '200'
iy = '10 1'
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[mixing_length]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = vel_x
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = vel_x
rho = ${rho}
mixing_length = mixing_length
momentum_component = 'x'
u = vel_x
v = vel_y
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = vel_y
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = vel_y
rho = ${rho}
mixing_length = mixing_length
momentum_component = 'y'
u = vel_x
v = vel_y
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[]
[AuxKernels]
[mixing_len]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_length
execute_on = 'initial'
von_karman_const = ${von_karman_const}
delta = 0.5
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_y
function = '0'
[]
[wall-u]
type = INSFVWallFunctionBC
variable = vel_x
boundary = 'top'
u = vel_x
v = vel_y
mu = ${mu}
rho = ${rho}
momentum_component = x
[]
[wall-v]
type = INSFVWallFunctionBC
variable = vel_y
boundary = 'top'
u = vel_x
v = vel_y
mu = ${mu}
rho = ${rho}
momentum_component = y
[]
[sym-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = vel_x
u = vel_x
v = vel_y
mu = total_viscosity
momentum_component = x
[]
[sym-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = vel_y
u = vel_x
v = vel_y
mu = total_viscosity
momentum_component = y
[]
[symmetry_pressure]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '0'
[]
[]
[Materials]
[total_viscosity]
type = MixingLengthTurbulentViscosityMaterial
u = 'vel_x' #computes total viscosity = mu_t + mu
v = 'vel_y' #property is called total_viscosity
mixing_length = mixing_length
mu = ${mu}
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
[TimeStepper]
type = IterationAdaptiveDT
optimal_iterations = 6
dt = 1e-3
[]
nl_abs_tol = 1e-8
end_time = 1e9
[]
[Outputs]
[out]
type = Exodus
execute_on = 'final'
[]
[]
(test/tests/meshgenerators/refine_sideset_generator/test_left.i)
[Mesh]
[eg]
type = CartesianMeshGenerator
dim = 3
dx = '2 1 1'
dy = '2 3'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1 1
1 2 0 1
0 1 1 1
2 2 2 2
3 3 1 3
1 1 1 1'
[]
[refine]
type = RefineSidesetGenerator
input = eg
boundaries = 'left'
refinement = '3'
boundary_side = 'primary'
enable_neighbor_refinement = false
[]
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/postprocessors/convective_ht_side_integral.i)
[Mesh]
type = MeshGeneratorMesh
[./cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '0.45 0.1 0.45'
ix = '5 1 5'
dy = '0.45 0.1 0.45'
iy = '5 1 5'
subdomain_id = '1 1 1
1 2 1
1 1 1'
[../]
[./add_iss_1]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
new_boundary = 'interface'
input = cartesian
[../]
[./block_deleter]
type = BlockDeletionGenerator
block = 2
input = add_iss_1
[../]
[]
[Variables]
[./temperature]
initial_condition = 300
[../]
[]
[AuxVariables]
[./channel_T]
family = MONOMIAL
order = CONSTANT
initial_condition = 400
[../]
[./channel_Hw]
family = MONOMIAL
order = CONSTANT
initial_condition = 1000
[../]
[]
[Kernels]
[./graphite_diffusion]
type = HeatConduction
variable = temperature
diffusion_coefficient = 'k_s'
[../]
[]
[BCs]
## boundary conditions for the thm channels in the reflector
[./channel_heat_transfer]
type = CoupledConvectiveHeatFluxBC
variable = temperature
htc = channel_Hw
T_infinity = channel_T
boundary = 'interface'
[../]
# hot boundary on the left
[./left]
type = DirichletBC
variable = temperature
value = 1000
boundary = 'left'
[../]
# cool boundary on the right
[./right]
type = DirichletBC
variable = temperature
value = 300
boundary = 'right'
[../]
[]
[Materials]
[./thermal]
type = GenericConstantMaterial
prop_names = 'k_s'
prop_values = '12'
[../]
[./htc_material]
type = GenericConstantMaterial
prop_names = 'alpha_wall'
prop_values = '1000'
[../]
[./tfluid_mat]
type = PiecewiseLinearInterpolationMaterial
property = tfluid_mat
variable = channel_T
x = '400 500'
y = '400 500'
[../]
[]
[Postprocessors]
[./Qw1]
type = ConvectiveHeatTransferSideIntegral
T_fluid_var = channel_T
htc_var = channel_Hw
T_solid = temperature
boundary = interface
[../]
[./Qw2]
type = ConvectiveHeatTransferSideIntegral
T_fluid_var = channel_T
htc = alpha_wall
T_solid = temperature
boundary = interface
[../]
[./Qw3]
type = ConvectiveHeatTransferSideIntegral
T_fluid = tfluid_mat
htc = alpha_wall
T_solid = temperature
boundary = interface
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
csv = true
[]
(modules/ray_tracing/test/tests/raybcs/errors/raybc_errors.i)
[Mesh]
active = 'gmg'
[gmg]
type = CartesianMeshGenerator
dim = 1
dx = '0.5 0.5'
ix = '1 1'
subdomain_id = '0 1'
[]
[internal]
type = SideSetsBetweenSubdomainsGenerator
input = gmg
primary_block = 1
paired_block = 0
new_boundary = internal
[]
[]
[UserObjects]
active = 'study'
[study]
type = RepeatableRayStudy
start_points = '0 0 0'
directions = '1 0 0'
names = 'ray'
execute_on = INITIAL
ray_kernel_coverage_check = false
[]
[set_end_study]
type = RepeatableRayStudy
start_points = '0 0 0'
end_points = '1 0 0'
names = 'ray'
execute_on = INITIAL
ray_kernel_coverage_check = false
use_internal_sidesets = true
[]
[start_internal_study]
type = RepeatableRayStudy
start_points = '0.5 0 0'
directions = '1 0 0'
names = 'ray'
execute_on = INITIAL
ray_kernel_coverage_check = false
use_internal_sidesets = true
[]
[]
[RayBCs]
active = ''
[kill]
type = KillRayBC
boundary = right
[]
[change]
type = ChangeRayRayBCTest
boundary = right
change_direction = true
[]
[change_again]
type = ChangeRayRayBCTest
boundary = right
change_direction = true
[]
[change_internal]
type = ChangeRayRayBCTest
boundary = internal
change_direction = true
[]
[change_zero]
type = ChangeRayRayBCTest
boundary = right
change_direction_zero = true
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/porosity_change/1d-rc-continuous.i)
mu=1.5
rho=1.1
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '15 15'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
porosity = porosity
pressure = pressure
[]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[ICs]
[porosity_continuous]
type = FunctionIC
variable = porosity
function = smooth_jump
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
value = '1 - 0.5 * 1 / (1 + exp(-30*(x-1)))'
[]
# Generated by compute-functions-1d.py
[exact_u]
type = ParsedFunction
value = 'cos((1/2)*x*pi)'
[]
[forcing_u]
type = ADParsedFunction
value = '-mu*(1 - 0.5/(exp(30 - 30*x) + 1))*(-1/4*pi^2*cos((1/2)*x*pi)/(1 - 0.5/(exp(30 - 30*x) + 1)) - 15.0*pi*exp(30 - 30*x)*sin((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2) - 450.0*exp(30 - 30*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2) + 900.0*exp(60 - 60*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^3) + 450.0*exp(60 - 60*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^3*(exp(30 - 30*x) + 1)^4)) + 15.0*mu*(-1/2*pi*sin((1/2)*x*pi)/(1 - 0.5/(exp(30 - 30*x) + 1)) + 15.0*exp(30 - 30*x)*cos((1/2)*x*pi)/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2))*exp(30 - 30*x)/(exp(30 - 30*x) + 1)^2 - pi*rho*sin((1/2)*x*pi)*cos((1/2)*x*pi)/(1 - 0.5/(exp(30 - 30*x) + 1)) + 15.0*rho*exp(30 - 30*x)*cos((1/2)*x*pi)^2/((1 - 0.5/(exp(30 - 30*x) + 1))^2*(exp(30 - 30*x) + 1)^2) + (1 - 0.5/(exp(30 - 30*x) + 1))*cos(x)'
vars = 'mu rho'
vals = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
value = 'sin(x)'
[]
[forcing_p]
type = ParsedFunction
value = '-1/2*pi*rho*sin((1/2)*x*pi)'
vars = 'rho'
vals = '${rho}'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = 'exact_u'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
# ksp_gmres_restart bumped to 200 for linear convergence
nl_max_its = 100
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2Error
variable = u
function = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
variable = pressure
function = exact_p
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_rz_cylinder.i)
rpv_core_gap_size = 0.2
core_outer_radius = 2
rpv_inner_radius = '${fparse 2 + rpv_core_gap_size}'
rpv_outer_radius = '${fparse 2.5 + rpv_core_gap_size}'
rpv_width = '${fparse rpv_outer_radius - rpv_inner_radius}'
rpv_outer_htc = 10 # W/m^2/K
rpv_outer_Tinf = 300 # K
core_blocks = '1'
rpv_blocks = '3'
[Mesh]
[gmg]
type = CartesianMeshGenerator
dim = 2
dx = '${core_outer_radius} ${rpv_core_gap_size} ${rpv_width}'
ix = '400 1 100'
dy = 1
iy = '5'
[]
[set_block_id1]
type = SubdomainBoundingBoxGenerator
input = gmg
bottom_left = '0 0 0'
top_right = '${core_outer_radius} 1 0'
block_id = 1
location = INSIDE
[]
[rename_core_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id1
primary_block = 1
paired_block = 0
new_boundary = 'core_outer'
[]
[set_block_id3]
type = SubdomainBoundingBoxGenerator
input = rename_core_bdy
bottom_left = '${rpv_inner_radius} 0 0'
top_right = '${rpv_outer_radius} 1 0'
block_id = 3
location = INSIDE
[]
[rename_inner_rpv_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id3
primary_block = 3
paired_block = 0
new_boundary = 'rpv_inner'
[]
# comment out for test without gap
[2d_mesh]
type = BlockDeletionGenerator
input = rename_inner_rpv_bdy
block = 0
[]
allow_renumbering = false
[]
[Problem]
coord_type = RZ
[]
[Variables]
[Tsolid]
initial_condition = 500
[]
[]
[Kernels]
[heat_source]
type = CoupledForce
variable = Tsolid
block = '${core_blocks}'
v = power_density
[]
[heat_conduction]
type = HeatConduction
variable = Tsolid
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = Tsolid
boundary = 'right' # outer RPV
coefficient = ${rpv_outer_htc}
T_infinity = ${rpv_outer_Tinf}
[]
[]
[ThermalContact]
[RPV_gap]
type = GapHeatTransfer
gap_geometry_type = 'CYLINDER'
emissivity_primary = 0.8
emissivity_secondary = 0.8
variable = Tsolid
primary = 'core_outer'
secondary = 'rpv_inner'
gap_conductivity = 0.1
quadrature = true
[]
[]
[AuxVariables]
[power_density]
block = '${core_blocks}'
initial_condition = 50e3
[]
[]
[Materials]
[simple_mat]
type = HeatConductionMaterial
thermal_conductivity = 34.6 # W/m/K
[]
[]
[Postprocessors]
[Tcore_avg]
type = ElementAverageValue
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${core_blocks}'
[]
[Trpv_avg]
type = ElementAverageValue
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${rpv_blocks}'
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = '${core_blocks}'
[]
[rpv_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = Tsolid
boundary = 'right' # outer RVP
T_fluid = ${rpv_outer_Tinf}
htc = ${rpv_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(rpv_convective_out - ptot) / ptot'
pp_names = 'rpv_convective_out ptot'
[]
[flux_from_core] # converges to ptot as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = core_outer
diffusivity = thermal_conductivity
[]
[flux_into_rpv] # converges to rpv_convective_out as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = rpv_inner
diffusivity = thermal_conductivity
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = 'rpv_inner core_outer'
variable = Tsolid
[]
[]
[Executioner]
type = Steady
automatic_scaling = true
compute_scaling_once = false
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart '
petsc_options_value = 'hypre boomeramg 100'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
l_max_its = 100
[Quadrature]
# order = fifth
side_order = seventh
[]
line_search = none
[]
[Outputs]
exodus = false
csv = true
[]
(modules/ray_tracing/test/tests/traceray/internal_sidesets/internal_sidesets_3d.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 3
dx = '2 2 2'
dy = '2 2 2'
dz = '2 2 2'
ix = '2 2 2'
iy = '2 2 2'
iz = '2 2 2'
subdomain_id = '0 0 0
0 1 0
0 0 0
0 2 0
3 7 4
0 5 0
0 0 0
0 6 0
0 0 0'
[]
[interior_back]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 7
paired_block = 1
new_boundary = 'interior_back'
[]
[interior_bottom]
type = SideSetsBetweenSubdomainsGenerator
input = interior_back
primary_block = 7
paired_block = 2
new_boundary = 'interior_bottom'
[]
[interior_left]
type = SideSetsBetweenSubdomainsGenerator
input = interior_bottom
primary_block = 7
paired_block = 3
new_boundary = 'interior_left'
[]
[interior_right]
type = SideSetsBetweenSubdomainsGenerator
input = interior_left
primary_block = 7
paired_block = 4
new_boundary = 'interior_right'
[]
[interior_top]
type = SideSetsBetweenSubdomainsGenerator
input = interior_right
primary_block = 7
paired_block = 5
new_boundary = 'interior_top'
[]
[interior_front]
type = SideSetsBetweenSubdomainsGenerator
input = interior_top
primary_block = 7
paired_block = 6
new_boundary = 'interior_front'
[]
[]
[RayBCs]
active = 'kill_internal'
# active = 'kill_external reflect_internal'
# for testing internal kill
[kill_internal]
type = KillRayBC
boundary = 'interior_top interior_right interior_bottom interior_left interior_front interior_back'
[]
# for testing internal reflect
[kill_external]
type = KillRayBC
boundary = 'top right bottom left front back'
[]
[reflect_internal]
type = ReflectRayBC
boundary = 'interior_top interior_right interior_bottom interior_left interior_front interior_back'
[]
[]
[UserObjects/study]
type = RepeatableRayStudy
start_points = '0 0 0
2 2 2
6 6 6
4 4 4
0 2.5 2.5
3 3 6
2.5 0 0
3 3 3
2.5 2.5 2.5'
directions = '1 1 1
1 1 1
-1 -1 -1
-1 -1 -1
1 0.1 0
0 0 -1
0 1 1
1 1 1
0.5 1.5 1.5'
names = 'to_bottom_left_corner
at_bottom_left_corner
to_top_right_corner
at_top_right_corner
centroid_offset
top_down
left_to_edge
inside_to_corner
inside_offset'
execute_on = initial
ray_distance = 10
ray_kernel_coverage_check = false
use_internal_sidesets = true
[]
[Postprocessors/total_distance]
type = RayTracingStudyResult
study = study
result = total_distance
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
[]
[Outputs]
exodus = false
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_balance/large_gap_heat_transfer_test_rz_cylinder.i)
rpv_core_gap_size = 0.2
core_outer_radius = 2
rpv_inner_radius = '${fparse 2 + rpv_core_gap_size}'
rpv_outer_radius = '${fparse 2.5 + rpv_core_gap_size}'
rpv_width = '${fparse rpv_outer_radius - rpv_inner_radius}'
rpv_outer_htc = 10 # W/m^2/K
rpv_outer_Tinf = 300 # K
core_blocks = '1'
rpv_blocks = '3'
[Mesh]
[gmg]
type = CartesianMeshGenerator
dim = 2
dx = '${core_outer_radius} ${rpv_core_gap_size} ${rpv_width}'
ix = '400 1 100'
dy = 1
iy = '5'
[]
[set_block_id1]
type = SubdomainBoundingBoxGenerator
input = gmg
bottom_left = '0 0 0'
top_right = '${core_outer_radius} 1 0'
block_id = 1
location = INSIDE
[]
[rename_core_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id1
primary_block = 1
paired_block = 0
new_boundary = 'core_outer'
[]
[set_block_id3]
type = SubdomainBoundingBoxGenerator
input = rename_core_bdy
bottom_left = '${rpv_inner_radius} 0 0'
top_right = '${rpv_outer_radius} 1 0'
block_id = 3
location = INSIDE
[]
[rename_inner_rpv_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id3
primary_block = 3
paired_block = 0
new_boundary = 'rpv_inner'
[]
# comment out for test without gap
[2d_mesh]
type = BlockDeletionGenerator
input = rename_inner_rpv_bdy
block = 0
[]
[]
[Problem]
coord_type = RZ
[]
[Variables]
[Tsolid]
initial_condition = 500
[]
[]
[Kernels]
[heat_source]
type = CoupledForce
variable = Tsolid
block = '${core_blocks}'
v = power_density
[]
[heat_conduction]
type = HeatConduction
variable = Tsolid
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = Tsolid
boundary = 'right' # outer RPV
coefficient = ${rpv_outer_htc}
T_infinity = ${rpv_outer_Tinf}
[]
[]
[ThermalContact]
[RPV_gap]
type = GapHeatTransfer
gap_geometry_type = 'CYLINDER'
emissivity_primary = 0.8
emissivity_secondary = 0.8
variable = Tsolid
primary = 'core_outer'
secondary = 'rpv_inner'
gap_conductivity = 0.1
quadrature = true
[]
[]
[AuxVariables]
[power_density]
block = '${core_blocks}'
initial_condition = 50e3
[]
[]
[Materials]
[simple_mat]
type = HeatConductionMaterial
thermal_conductivity = 34.6 # W/m/K
[]
[]
[Postprocessors]
[Tcore_avg]
type = ElementAverageValue
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${core_blocks}'
[]
[Trpv_avg]
type = ElementAverageValue
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${rpv_blocks}'
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = '${core_blocks}'
[]
[rpv_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = Tsolid
boundary = 'right' # outer RVP
T_fluid = ${rpv_outer_Tinf}
htc = ${rpv_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(rpv_convective_out - ptot) / ptot'
pp_names = 'rpv_convective_out ptot'
[]
[flux_from_core] # converges to ptot as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = core_outer
diffusivity = thermal_conductivity
[]
[flux_into_rpv] # converges to rpv_convective_out as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = rpv_inner
diffusivity = thermal_conductivity
[]
[]
[Executioner]
type = Steady
automatic_scaling = true
compute_scaling_once = false
petsc_options_iname = '-pc_type -pc_hypre_type -ksp_gmres_restart '
petsc_options_value = 'hypre boomeramg 100'
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
l_max_its = 100
[Quadrature]
# order = fifth
side_order = seventh
[]
line_search = none
[]
[Outputs]
exodus = false
csv = true
[]
(modules/reactor/test/tests/meshgenerators/subdomain_extra_element_id_generator/subdomain_elem_ids_test.i)
[Mesh]
[gmg]
type = CartesianMeshGenerator
dim = 2
dx = 1
ix = 10
dy = '0.2 0.2 0.2 0.2 0.2'
iy = '2 2 2 2 2'
subdomain_id = '0 1 2 3 4'
[]
[give_subdomain_name]
type = RenameBlockGenerator
input = gmg
old_block = '1 3'
new_block = 'sub1 sub3'
[]
[subdomain_ids]
type = SubdomainExtraElementIDGenerator
input = give_subdomain_name
subdomains = '0 sub1 2 sub3'
extra_element_id_names = 'test_id1 test_id2 test_id3'
extra_element_ids = '
1 3 5 4;
2 9 10 11;
0 8 1 2
'
default_extra_element_ids = '-1 0 0'
[]
[]
[Problem]
kernel_coverage_check = false
solve = false
[]
[AuxVariables]
[test_id1]
family = MONOMIAL
order = CONSTANT
[]
[test_id2]
family = MONOMIAL
order = CONSTANT
[]
[test_id3]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[test_id1]
type = ExtraElementIDAux
variable = test_id1
extra_id_name = test_id1
[]
[test_id2]
type = ExtraElementIDAux
variable = test_id2
extra_id_name = test_id2
[]
[test_id3]
type = ExtraElementIDAux
variable = test_id3
extra_id_name = test_id3
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(test/tests/kernels/hfem/robin_displaced.i)
[Mesh]
[square]
type = CartesianMeshGenerator
dx = '0.3125 0.3125 0.3125'
dy = '0.3333333333333 0.3333333333333 0.3333333333333'
dim = 2
[]
displacements = 'x_disp y_disp'
build_all_side_lowerd_mesh = true
[]
[Variables]
[u]
order = THIRD
family = MONOMIAL
block = 0
components = 2
[]
[lambda]
order = CONSTANT
family = MONOMIAL
block = INTERNAL_SIDE_LOWERD_SUBDOMAIN
components = 2
[]
[]
[AuxVariables]
[v]
order = CONSTANT
family = MONOMIAL
block = 0
initial_condition = '1'
[]
[x_disp]
block = 0
[]
[y_disp]
block = 0
initial_condition = 0
[]
[]
[AuxKernels]
[x_disp]
type = ParsedAux
variable = x_disp
use_xyzt = true
function = 'x/15'
[]
[]
[Kernels]
[diff]
type = ArrayDiffusion
variable = u
block = 0
diffusion_coefficient = dc
use_displaced_mesh = true
[]
[source]
type = ArrayCoupledForce
variable = u
v = v
coef = '1 2'
block = 0
use_displaced_mesh = true
[]
[]
[DGKernels]
[surface]
type = ArrayHFEMDiffusion
variable = u
lowerd_variable = lambda
use_displaced_mesh = true
[]
[]
[BCs]
[all]
type = ArrayVacuumBC
boundary = 'left right top bottom'
variable = u
use_displaced_mesh = true
[]
[]
[Materials]
[dc]
type = GenericConstantArray
prop_name = dc
prop_value = '1 1'
[]
[]
[Postprocessors]
[intu]
type = ElementIntegralArrayVariablePostprocessor
variable = u
block = 0
use_displaced_mesh = true
[]
[lambdanorm]
type = ElementArrayL2Norm
variable = lambda
block = INTERNAL_SIDE_LOWERD_SUBDOMAIN
use_displaced_mesh = true
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -snes_linesearch_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu basic mumps'
[]
[Outputs]
[out]
# we hide lambda because it may flip sign due to element
# renumbering with distributed mesh
type = Exodus
hide = lambda
[]
csv = true
[]
(modules/heat_conduction/test/tests/postprocessors/ad_convective_ht_side_integral.i)
[Mesh]
[./cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '0.45 0.1 0.45'
ix = '5 1 5'
dy = '0.45 0.1 0.45'
iy = '5 1 5'
subdomain_id = '1 1 1
1 2 1
1 1 1'
[../]
[./add_iss_1]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
new_boundary = 'interface'
input = cartesian
[../]
[./block_deleter]
type = BlockDeletionGenerator
block = 2
input = add_iss_1
[../]
[]
[Variables]
[./temperature]
initial_condition = 300
[../]
[]
[AuxVariables]
[./channel_T]
family = MONOMIAL
order = CONSTANT
initial_condition = 400
[../]
[./channel_Hw]
family = MONOMIAL
order = CONSTANT
initial_condition = 1000
[../]
[]
[Kernels]
[./graphite_diffusion]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'thermal_conductivity'
[../]
[]
[BCs]
## boundary conditions for the thm channels in the reflector
[./channel_heat_transfer]
type = CoupledConvectiveHeatFluxBC
variable = temperature
htc = channel_Hw
T_infinity = channel_T
boundary = 'interface'
[../]
# hot boundary on the left
[./left]
type = DirichletBC
variable = temperature
value = 1000
boundary = 'left'
[../]
# cool boundary on the right
[./right]
type = DirichletBC
variable = temperature
value = 300
boundary = 'right'
[../]
[]
[Materials]
[./pronghorn_solid_material]
type = ADHeatConductionMaterial
temp = temperature
thermal_conductivity = 25
specific_heat = 1000
[../]
[./htc_material]
type = ADGenericConstantMaterial
prop_names = 'alpha_wall'
prop_values = '1000'
[../]
[./tfluid_mat]
type = ADPiecewiseLinearInterpolationMaterial
property = tfluid_mat
variable = channel_T
x = '400 500'
y = '400 500'
[../]
[]
[Postprocessors]
[./Qw1]
type = ADConvectiveHeatTransferSideIntegral
T_fluid_var = channel_T
htc_var = channel_Hw
T_solid = temperature
boundary = interface
[../]
[./Qw2]
type = ADConvectiveHeatTransferSideIntegral
T_fluid_var = channel_T
htc = alpha_wall
T_solid = temperature
boundary = interface
[../]
[./Qw3]
type = ADConvectiveHeatTransferSideIntegral
T_fluid = tfluid_mat
htc = alpha_wall
T_solid = temperature
boundary = interface
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/fvkernels/flow_diode/friction.i)
mu = 1
rho = 1
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 0.5 1'
dy = '0.5 0.5'
ix = '8 5 8'
iy = '8 8'
subdomain_id = '0 1 2
1 2 1'
[]
[top_outlet]
type = ParsedGenerateSideset
input = cmg
combinatorial_geometry = 'x>2.499 & y>0.4999'
new_sideset_name = top_right
[]
[bottom_outlet]
type = ParsedGenerateSideset
input = top_outlet
combinatorial_geometry = 'x>2.499 & y<0.50001'
new_sideset_name = bottom_right
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[diodes_against_flow]
type = INSFVFrictionFlowDiode
resistance = 100
variable = vel_x
direction = '-1 0 0'
block = 1
momentum_component = 'x'
[]
[diode_free_flow]
type = INSFVFrictionFlowDiode
resistance = 100
variable = vel_x
direction = '1 0 0'
block = 2
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[]
[FVBCs]
[walls_u]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'top bottom'
function = 0
[]
[walls_v]
type = INSFVNoSlipWallBC
variable = vel_y
boundary = 'top bottom'
function = 0
[]
[inlet_u]
type = INSFVInletVelocityBC
variable = vel_x
boundary = 'left'
function = 1
[]
[inlet_v]
type = INSFVInletVelocityBC
variable = vel_y
boundary = 'left'
function = 0
[]
[outlet]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = 1
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
nl_abs_tol = 1e-14
[]
[Postprocessors]
[mdot_top]
type = VolumetricFlowRate
boundary = 'top_right'
vel_x = vel_x
vel_y = vel_y
advected_quantity = ${rho}
[]
[mdot_bottom]
type = VolumetricFlowRate
boundary = 'bottom_right'
vel_x = vel_x
vel_y = vel_y
advected_quantity = ${rho}
[]
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/radiation_transfer_action/radiative_transfer_no_action.i)
[Problem]
kernel_coverage_check = false
[]
[Mesh]
type = MeshGeneratorMesh
[./cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1.3 1.9'
ix = '3 3 3'
dy = '2 1.2 0.9'
iy = '3 3 3'
subdomain_id = '0 1 0
4 5 2
0 3 0'
[../]
[./inner_bottom]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 1
paired_block = 5
new_boundary = 'inner_bottom'
[../]
[./inner_left]
type = SideSetsBetweenSubdomainsGenerator
input = inner_bottom
primary_block = 4
paired_block = 5
new_boundary = 'inner_left'
[../]
[./inner_right]
type = SideSetsBetweenSubdomainsGenerator
input = inner_left
primary_block = 2
paired_block = 5
new_boundary = 'inner_right'
[../]
[./inner_top]
type = SideSetsBetweenSubdomainsGenerator
input = inner_right
primary_block = 3
paired_block = 5
new_boundary = 'inner_top'
[../]
[./rename]
type = RenameBlockGenerator
old_block = '1 2 3 4'
new_block = '0 0 0 0'
input = inner_top
[../]
[./split_inner_bottom]
type = PatchSidesetGenerator
boundary = 4
n_patches = 2
partitioner = centroid
centroid_partitioner_direction = x
input = rename
[../]
[./split_inner_left]
type = PatchSidesetGenerator
boundary = 5
n_patches = 2
partitioner = centroid
centroid_partitioner_direction = y
input = split_inner_bottom
[../]
[./split_inner_right]
type = PatchSidesetGenerator
boundary = 6
n_patches = 2
partitioner = centroid
centroid_partitioner_direction = y
input = split_inner_left
[../]
[./split_inner_top]
type = PatchSidesetGenerator
boundary = 7
n_patches = 3
partitioner = centroid
centroid_partitioner_direction = x
input = split_inner_right
[../]
[]
[Variables]
[./temperature]
block = 0
[../]
[]
[Kernels]
[./heat_conduction]
type = HeatConduction
variable = temperature
block = 0
diffusion_coefficient = 5
[../]
[]
[UserObjects]
[./gray_lambert]
type = ViewFactorObjectSurfaceRadiation
boundary = 'inner_bottom_0 inner_bottom_1
inner_left_0 inner_left_1
inner_right_0 inner_right_1
inner_top_0 inner_top_1 inner_top_2'
fixed_temperature_boundary = 'inner_bottom_0 inner_bottom_1'
fixed_boundary_temperatures = '1200 1200'
adiabatic_boundary = 'inner_top_0 inner_top_1 inner_top_2'
emissivity = '0.9 0.9
0.8 0.8
0.4 0.4
1 1 1'
temperature = temperature
view_factor_object_name = view_factor
execute_on = 'LINEAR TIMESTEP_END'
[../]
[./view_factor]
type = UnobstructedPlanarViewFactor
boundary = 'inner_bottom_0 inner_bottom_1
inner_left_0 inner_left_1
inner_right_0 inner_right_1
inner_top_0 inner_top_1 inner_top_2'
normalize_view_factor = true
execute_on = 'INITIAL'
[../]
[]
[BCs]
[./left]
type = DirichletBC
variable = temperature
boundary = left
value = 600
[../]
[./right]
type = DirichletBC
variable = temperature
boundary = right
value = 300
[../]
[./radiation]
type = GrayLambertNeumannBC
variable = temperature
surface_radiation_object_name = gray_lambert
boundary = 'inner_left_0 inner_left_1
inner_right_0 inner_right_1'
[../]
[]
[Postprocessors]
[./average_T_inner_right]
type = SideAverageValue
variable = temperature
boundary = inner_right
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(test/tests/auxkernels/volume_aux/element.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
ix = '2 1 1'
iy = '2 3'
[]
[]
[AuxVariables/volume]
order = CONSTANT
family = MONOMIAL
[]
[AuxKernels/volume_aux]
type = VolumeAux
variable = volume
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_channel.i)
mu = 1
rho = 1
k = .01
cp = 1
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 0.5'
dy = '1'
ix = '8 5'
iy = '8'
subdomain_id = '0 1'
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'cmg'
primary_block = 0
paired_block = 1
new_boundary = 'interface'
[]
[fluid_side]
type = BreakBoundaryOnSubdomainGenerator
input = 'interface'
boundaries = 'top bottom'
[]
[]
[GlobalParams]
# retain behavior at time of test creation
two_term_boundary_expansion = false
rhie_chow_user_object = 'rc'
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = 0
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
block = 0
initial_condition = 1e-6
[]
[v]
type = INSFVVelocityVariable
block = 0
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
block = 0
[]
[T]
type = INSFVEnergyVariable
block = 0
initial_condition = 1
[]
[Ts]
type = INSFVEnergyVariable
block = 1
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
[]
[solid_temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = Ts
[]
[]
[FVInterfaceKernels]
[convection]
type = FVConvectionCorrelationInterface
variable1 = T
variable2 = Ts
boundary = 'interface'
h = 5
temp_solid = Ts
temp_fluid = T
subdomain1 = 0
subdomain2 = 1
wall_cell_is_bulk = true
[]
[]
[FVBCs]
[walls_u]
type = INSFVNoSlipWallBC
variable = u
boundary = 'interface left'
function = 0
[]
[walls_v]
type = INSFVNoSlipWallBC
variable = v
boundary = 'interface left'
function = 0
[]
[inlet_u]
type = INSFVInletVelocityBC
variable = u
boundary = 'bottom_to_0'
function = 0
[]
[inlet_v]
type = INSFVInletVelocityBC
variable = v
boundary = 'bottom_to_0'
function = 1
[]
[inlet_T]
type = FVDirichletBC
variable = T
boundary = 'bottom_to_0'
value = 0.5
[]
[outlet]
type = INSFVMassAdvectionOutflowBC
variable = pressure
boundary = 'top_to_0'
u = u
v = v
rho = ${rho}
[]
[outlet_u]
type = INSFVMomentumAdvectionOutflowBC
variable = u
boundary = 'top_to_0'
u = u
v = v
momentum_component = 'x'
rho = ${rho}
[]
[outlet_v]
type = INSFVMomentumAdvectionOutflowBC
variable = v
boundary = 'top_to_0'
u = u
v = v
momentum_component = 'y'
rho = ${rho}
[]
[heater]
type = FVDirichletBC
variable = 'Ts'
boundary = 'right'
value = 10
[]
[]
[Materials]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
block = 0
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
nl_abs_tol = 1e-14
[]
[Postprocessors]
[max_T]
type = ElementExtremeValue
variable = T
block = 0
[]
[max_Ts]
type = ElementExtremeValue
variable = Ts
block = 1
[]
[mdot_out]
type = VolumetricFlowRate
boundary = 'top_to_0'
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-friction.i)
mu=1.1
rho=1
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '2.5 2.5'
dy = '1.0'
ix = '20 20'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'lambda'
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'mean-pressure'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[u_friction]
type = PINSFVMomentumFriction
variable = superficial_vel_x
momentum_component = 'x'
porosity = porosity
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
rho = ${rho}
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[v_friction]
type = PINSFVMomentumFriction
variable = superficial_vel_y
momentum_component = 'y'
porosity = porosity
Darcy_name = 'Darcy_coefficient'
Forchheimer_name = 'Forchheimer_coefficient'
rho = ${rho}
[]
[mean-pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
phi0 = 0.01
[]
[]
[FVBCs]
inactive = 'free-slip-u free-slip-v'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top'
variable = superficial_vel_x
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top'
variable = superficial_vel_y
momentum_component = 'y'
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[]
[Materials]
[darcy]
type = ADGenericVectorFunctorMaterial
prop_names = 'Darcy_coefficient Forchheimer_coefficient'
prop_values = '0.1 0.1 0.1 0.1 0.1 0.1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-14
[]
# Some basic Postprocessors to visually examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = superficial_vel_x
boundary = 'right'
[]
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/break_mesh_by_block_generator/break_mesh_block_pairs_restricted_3blocks.i)
[Mesh]
[msh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1 1'
dy = '1 1 1'
subdomain_id = '0 0 0 0 1 2 2 1 1 1 1 1'
[]
[split]
input = msh
type = BreakMeshByBlockGenerator
split_interface = true
[]
[]
(modules/heat_conduction/test/tests/view_factors/view_factor_obstructed.i)
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 3
dx = '0.55 0.9 0.55'
dy = '0.55 0.9 0.55'
dz = '0.75 0.0001 0.25'
subdomain_id = '0 0 0
0 0 0
0 0 0
0 0 0
0 1 0
0 0 0
0 0 0
0 0 0
0 0 0'
[]
[side_set_around_obstruction]
type = SideSetsBetweenSubdomainsGenerator
input = cartesian
primary_block = 1
paired_block = 0
new_boundary = 'obstacle'
[]
[]
[UserObjects]
[view_factor_study]
type = ViewFactorRayStudy
execute_on = initial
boundary = 'left right top bottom front back obstacle'
face_order = FOURTH
polar_quad_order = 12
azimuthal_quad_order = 4
warn_subdomain_hmax = false
[]
[view_factor]
type = RayTracingViewFactor
boundary = 'left right top bottom front back obstacle'
execute_on = INITIAL
ray_study_name = view_factor_study
[]
[]
[RayBCs/viewfactor]
type = ViewFactorRayBC
boundary = 'left right top bottom front back obstacle'
[]
# Reference solution for front -> back view factor
# is 0.282833. This result is derived from analytical
# view factors from:
# front -> orthogonal sides around front [left right top bottom]
# front -> obstacle
# front -> everywhere must be sum to 1
#
[Postprocessors]
[front_back]
type = ViewFactorPP
from_boundary = front
to_boundary = back
view_factor_object_name = view_factor
[]
[]
[Problem]
solve = false
[]
[Executioner]
type = Steady
[]
[Outputs]
csv = true
[]
(modules/ray_tracing/test/tests/traceray/internal_sidesets/internal_sidesets_2d.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '2 2 2'
dy = '2 2 2'
ix = '2 2 2'
iy = '2 2 2'
subdomain_id = '0 1 0
2 5 3
0 4 0'
[]
[interior_bottom]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 5
paired_block = 1
new_boundary = 'interior_bottom'
[]
[interior_left]
type = SideSetsBetweenSubdomainsGenerator
input = interior_bottom
primary_block = 5
paired_block = 2
new_boundary = 'interior_left'
[]
[interior_right]
type = SideSetsBetweenSubdomainsGenerator
input = interior_left
primary_block = 5
paired_block = 3
new_boundary = 'interior_right'
[]
[interior_top]
type = SideSetsBetweenSubdomainsGenerator
input = interior_right
primary_block = 5
paired_block = 4
new_boundary = 'interior_top'
[]
[]
[RayBCs]
active = 'kill_internal'
# active = 'kill_external reflect_internal'
# for testing internal kill
[kill_internal]
type = KillRayBC
boundary = 'interior_top interior_right interior_bottom interior_left'
[]
# for testing internal reflect
[kill_external]
type = KillRayBC
boundary = 'top right bottom left'
[]
[reflect_internal]
type = ReflectRayBC
boundary = 'interior_top interior_right interior_bottom interior_left'
[]
[]
[UserObjects/study]
type = RepeatableRayStudy
start_points = '0 0 0
2 4 0
6 6 0
0 2.5 0
3 6 0
2.5 2.5 0'
directions = '1 1 0
1 -1 0
-1 -1 0
1 0.1 0
0 -1 0
0.5 1.5 0'
names = 'to_bottom_left_corner
at_top_left_corner
to_top_right_corner
to_left_offset
to_top_center_node
inside_to_top'
ray_distance = 10
execute_on = initial
ray_kernel_coverage_check = false
use_internal_sidesets = true
[]
[Postprocessors/total_distance]
type = RayTracingStudyResult
study = study
result = total_distance
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
[]
[Outputs]
exodus = false
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/cns/shock_tube_2D_cavity/hllc_sod_shocktube_2D.i)
rho_left = 1
E_left = 2.501505578
u_left = 1e-15
rho_right = 0.125
E_right = 1.999770935
u_right = 1e-15
x_sep = 35
[GlobalParams]
fp = fp
[]
[Mesh]
[./cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '40 20'
ix = '200 100'
dy = '1 20 2 20 1'
iy = '4 100 10 100 4'
subdomain_id = '0 0
0 1
1 1
0 1
0 0'
[../]
[./wall]
type = SideSetsBetweenSubdomainsGenerator
input = cartesian
primary_block = 1
paired_block = 0
new_boundary = 'wall'
[../]
[./delete]
type = BlockDeletionGenerator
input = wall
block = 0
[../]
[]
[Modules]
[./FluidProperties]
[./fp]
type = IdealGasFluidProperties
allow_imperfect_jacobians = true
[../]
[../]
[]
[Variables]
[./rho]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[./rho_u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[./rho_v]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[./rho_E]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[AuxVariables]
[./Ma]
order = CONSTANT
family = MONOMIAL
[../]
[./p]
order = CONSTANT
family = MONOMIAL
[../]
[./v_norm]
order = CONSTANT
family = MONOMIAL
[../]
[./temperature]
order = CONSTANT
family = MONOMIAL
[../]
[]
[AuxKernels]
[./Ma_aux]
type = NSMachAux
variable = Ma
fluid_properties = fp
use_material_properties = true
[../]
[./p_aux]
type = ADMaterialRealAux
variable = p
property = pressure
[../]
[./v_norm_aux]
type = ADMaterialRealAux
variable = v_norm
property = speed
[../]
[./temperature_aux]
type = ADMaterialRealAux
variable = temperature
property = T_fluid
[../]
[]
[FVKernels]
[./mass_time]
type = FVTimeKernel
variable = rho
[../]
[./mass_advection]
type = CNSFVMassHLLC
variable = rho
[../]
[./momentum_x_time]
type = FVTimeKernel
variable = rho_u
[../]
[./momentum_x_advection]
type = CNSFVMomentumHLLC
variable = rho_u
momentum_component = x
[../]
[./momentum_y_time]
type = FVTimeKernel
variable = rho_v
[../]
[./momentum_y_advection]
type = CNSFVMomentumHLLC
variable = rho_v
momentum_component = y
[../]
[./fluid_energy_time]
type = FVTimeKernel
variable = rho_E
[../]
[./fluid_energy_advection]
type = CNSFVFluidEnergyHLLC
variable = rho_E
[../]
[]
[FVBCs]
[./mom_x_pressure]
type = CNSFVMomImplicitPressureBC
variable = rho_u
momentum_component = x
boundary = 'left right wall'
[../]
[./mom_y_pressure]
type = CNSFVMomImplicitPressureBC
variable = rho_v
momentum_component = y
boundary = 'wall'
[../]
[]
[ICs]
[./rho_ic]
type = FunctionIC
variable = rho
function = 'if (x < ${x_sep}, ${rho_left}, ${rho_right})'
[../]
[./rho_u_ic]
type = FunctionIC
variable = rho_u
function = 'if (x < ${x_sep}, ${fparse rho_left * u_left}, ${fparse rho_right * u_right})'
[../]
[./rho_E_ic]
type = FunctionIC
variable = rho_E
function = 'if (x < ${x_sep}, ${fparse E_left * rho_left}, ${fparse E_right * rho_right})'
[../]
[]
[Materials]
[./var_mat]
type = ConservedVarValuesMaterial
rho = rho
rhou = rho_u
rhov = rho_v
rho_et = rho_E
fp = fp
[../]
[./sound_speed]
type = SoundspeedMat
fp = fp
[../]
[]
[Preconditioning]
[./smp]
type = SMP
full = true
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[../]
[]
[Postprocessors]
[./cfl_dt]
type = ADCFLTimeStepSize
c_names = 'sound_speed'
vel_names = 'speed'
[../]
[]
[Executioner]
type = Transient
end_time = 100
[TimeIntegrator]
type = ExplicitSSPRungeKutta
order = 2
[]
l_tol = 1e-8
[./TimeStepper]
type = PostprocessorDT
postprocessor = cfl_dt
[../]
[]
[Outputs]
exodus = true
[]
(modules/geochemistry/test/tests/nodal_void_volume/nodal_void_volume.i)
# Computes nodal void volume and compares with the Postprocessor hand-calculated values
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 2 2'
dy = '1 4'
[]
[]
[Variables]
[u]
[]
[]
[Kernels]
[u]
type = Diffusion
variable = u
[]
[]
[Executioner]
type = Transient
end_time = 1
[]
[Outputs]
csv = true
[]
[UserObjects]
[nodal_void_volume]
type = NodalVoidVolume
porosity = porosity
concentration = u
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[vol]
[]
[]
[AuxKernels]
[porosity]
type = FunctionAux
variable = porosity
function = 'if(x<4, 1, 2)'
[]
[vol]
type = NodalVoidVolumeAux
variable = vol
nodal_void_volume_uo = nodal_void_volume
[]
[]
[Postprocessors]
[quarter]
type = PointValue
point = '0 0 0'
variable = vol
[]
[half]
type = PointValue
point = '1 0 0'
variable = vol
[]
[three_quarters]
type = PointValue
point = '2 0 0'
variable = vol
[]
[one_and_half]
type = PointValue
point = '4 0 0'
variable = vol
[]
[one]
type = PointValue
point = '6 0 0'
variable = vol
[]
[one_and_quarter]
type = PointValue
point = '0 1 0'
variable = vol
[]
[two_and_half]
type = PointValue
point = '1 1 0'
variable = vol
[]
[three_and_three_quarters]
type = PointValue
point = '2 1 0'
variable = vol
[]
[seven_and_half]
type = PointValue
point = '4 1 0'
variable = vol
[]
[five]
type = PointValue
point = '6 1 0'
variable = vol
[]
[]
(test/tests/quadrature/order/material_with_order.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
dy = ' 1 1 1'
subdomain_id = '1 2 3
4 5 6
7 8 9'
[]
[]
[Variables]
[u]
order = FIRST
family = L2_LAGRANGE
initial_condition = 1
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[forcing]
type = BodyForce
variable = u
[]
[]
[DGKernels]
[dg_diff]
type = DGDiffusion
variable = u
epsilon = -1
sigma = 6
[]
[test]
type = MatDGKernel
variable = u
mat_prop = dummy
[]
[]
[BCs]
[bc]
type = PenaltyDirichletBC
variable = u
boundary = '0 1 2 3'
penalty = 1e4
value = 0
[]
[]
[Postprocessors]
[block1_qps]
type = NumElemQPs
block = 1
[]
[block5_qps]
type = NumElemQPs
block = 5
[]
[block6_qps]
type = NumElemQPs
block = 6
[]
[]
[Materials]
[dummy]
type = GenericConstantMaterial
block = '1 2 3 4 6 7 8 9'
prop_names = dummy
prop_values = 1
[]
[qordermaterial]
type = QuadratureMaterial
block = 5
property_name = dummy
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/fvbcs/wall_function/Re_t395.i)
von_karman_const = 0.41
H = 1 #halfwidth of the channel
L = 150
Re = 13700
rho = 1
bulk_u = 1
mu = ${fparse rho * bulk_u * 2 * H / Re}
advected_interp_method='upwind'
velocity_interp_method='rc'
[GlobalParams]
two_term_boundary_expansion = true
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = CartesianMeshGenerator
dim = 2
dx = '${L}'
dy = '0.667 0.333'
ix = '200'
iy = '10 1'
[]
[]
[Problem]
fv_bcs_integrity_check = false
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[mixing_len]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_shear_stress]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[wall_yplus]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = u
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'x'
u = u
v = v
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_viscosity_rans]
type = INSFVMixingLengthReynoldsStress
variable = v
rho = ${rho}
mixing_length = mixing_len
momentum_component = 'y'
u = u
v = v
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[]
[AuxKernels]
[mixing_len]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_len
execute_on = 'initial'
von_karman_const = ${von_karman_const}
[]
[wall_shear_stress]
type = WallFunctionWallShearStressAux
variable = wall_shear_stress
walls = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
[]
[wall_yplus]
type = WallFunctionYPlusAux
variable = wall_yplus
walls = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = '0'
[]
[wall-u]
type = INSFVWallFunctionBC
variable = u
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = x
[]
[wall-v]
type = INSFVWallFunctionBC
variable = v
boundary = 'top'
u = u
v = v
mu = ${mu}
rho = ${rho}
momentum_component = y
[]
[sym-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = u
u = u
v = v
mu = total_viscosity
momentum_component = x
[]
[sym-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = v
u = u
v = v
mu = total_viscosity
momentum_component = y
[]
[symmetry_pressure]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '0'
[]
[]
[Materials]
[total_viscosity]
type = MixingLengthTurbulentViscosityMaterial
u = 'u' #computes total viscosity = mu_t + mu
v = 'v' #property is called total_viscosity
mixing_length = mixing_len
mu = ${mu}
rho = ${rho}
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/refine_block_generator/test_single.i)
[Mesh]
[eg]
type = CartesianMeshGenerator
dim = 3
dx = '2 1 1'
dy = '2 3'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1 1
1 2 0 1
0 1 1 1
2 2 2 2
2 3 1 2
1 1 1 1'
[]
[refine]
type = RefineBlockGenerator
input = eg
block = '0'
refinement = '0'
enable_neighbor_refinement = false
[]
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_3D.i)
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 3
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1
2 2 2
3 4 4
5 5 5
0 1 1
2 2 2
3 4 4
5 5 5
'
[../]
[]
(test/tests/postprocessors/side_integral/side_integral_functor.i)
[Mesh]
inactive = 'refine'
# U-shaped domains to have internal boundaries in
# a variety of directions
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
dy = '3 1'
ix = '4 5 3'
iy = '12 4'
subdomain_id = '1 2 1
1 1 1'
[]
[internal_boundary_dir1]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 1
paired_block = 2
new_boundary = 'inside_1'
[]
[internal_boundary_dir2]
type = SideSetsBetweenSubdomainsGenerator
input = internal_boundary_dir1
primary_block = 2
paired_block = 1
new_boundary = 'inside_2'
[]
[refine]
type = RefineBlockGenerator
input = internal_boundary_dir2
block = '1 2'
refinement = '2 1'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
block = 1
[]
[]
[AuxVariables]
[v1]
type = MooseVariableFVReal
block = 1
[InitialCondition]
type = FunctionIC
function = 'x + y'
[]
[]
[v2]
type = MooseVariableFVReal
block = 2
[InitialCondition]
type = FunctionIC
function = '2*x*x - y'
[]
[]
[]
[Functions]
[f1]
type = ADParsedFunction
value = 'exp(x - y)'
[]
[]
[Materials]
[m1]
type = ADGenericFunctorMaterial
prop_names = 'm1'
prop_values = 'f1'
[]
[m2]
type = ADPiecewiseByBlockFunctorMaterial
prop_name = 'm2'
subdomain_to_prop_value = '1 12
2 4'
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = '1'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 3
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = 1
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Postprocessors]
# Mesh external boundaries integration
[ext_u]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = u
restrict_to_functors_domain = true
[]
[ext_v1]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left right'
functor = v1
[]
[ext_v2]
type = ADSideIntegralFunctorPostprocessor
boundary = 'top'
functor = v2
restrict_to_functors_domain = true
[]
[ext_f1]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = f1
prefactor = f1
[]
[ext_m1]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = m1
restrict_to_functors_domain = true
[]
[ext_m2]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = m2
restrict_to_functors_domain = true
[]
# Internal to the mesh, but a side to the variables
# With orientation of normal 1->2
[int_s1_u]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = u
[]
[int_s1_v1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = v1
[]
[int_s1_f1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = f1
[]
[int_s1_m1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = m1
[]
[int_s1_m2]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = m2
[]
# With orientation of normal 2->1
[int_s2_v2]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = v2
[]
[int_s2_f1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = f1
[]
[int_s2_m1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = m1
[]
[int_s2_m2]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = m2
[]
[]
[Outputs]
csv = true
exodus = true
[]
[Problem]
kernel_coverage_check = false
[]
(modules/navier_stokes/test/tests/postprocessors/flow_rates/conservation_PINSFV.i)
mu=1
rho=1
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
inactive = 'mesh internal_boundary_bot internal_boundary_top'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1'
dy = '1 1 1'
ix = '5'
iy = '5 5 5'
subdomain_id = '1
2
3'
[]
[internal_boundary_bot]
type = SideSetsBetweenSubdomainsGenerator
input = mesh
new_boundary = 'internal_bot'
primary_block = 1
paired_block = 2
[]
[internal_boundary_top]
type = SideSetsBetweenSubdomainsGenerator
input = internal_boundary_bot
new_boundary = 'internal_top'
primary_block = 2
paired_block = 3
[]
[diverging_mesh]
type = FileMeshGenerator
file = 'expansion_quad.e'
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 0
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[temperature]
type = INSFVEnergyVariable
[]
[]
[AuxVariables]
[advected_density]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = ${rho}
[]
[porosity]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
force_boundary_execution = true
porosity = porosity
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
force_boundary_execution = true
porosity = porosity
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[temp_advection]
type = PINSFVEnergyAdvection
variable = temperature
advected_interp_method = 'upwind'
[]
[temp_source]
type = FVBodyForce
variable = temperature
function = 10
block = 1
[]
[]
[FVBCs]
inactive = 'noslip-u noslip-v'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = u
function = 0
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = v
function = 1
[]
[noslip-u]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = u
function = 0
[]
[noslip-v]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = v
function = 0
[]
[free-slip-u]
type = INSFVNaturalFreeSlipBC
boundary = 'right'
variable = u
momentum_component = 'x'
[]
[free-slip-v]
type = INSFVNaturalFreeSlipBC
boundary = 'right'
variable = v
momentum_component = 'y'
[]
[axis-u]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[axis-v]
type = PINSFVSymmetryVelocityBC
boundary = 'left'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[axis-p]
type = INSFVSymmetryPressureBC
boundary = 'left'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'top'
variable = pressure
function = 0
[]
[inlet_temp]
type = FVNeumannBC
boundary = 'bottom'
variable = temperature
value = 300
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
[]
[advected_material_property]
type = ADGenericFunctorMaterial
prop_names = 'advected_rho cp'
prop_values ='${rho} 1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Postprocessors]
[inlet_mass_variable]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = advected_density
[]
[inlet_mass_constant]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[inlet_mass_matprop]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = 'advected_rho'
[]
[mid1_mass]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[mid2_mass]
type = VolumetricFlowRate
boundary = internal_top
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[outlet_mass]
type = VolumetricFlowRate
boundary = top
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[inlet_momentum_x]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = u
[]
[inlet_momentum_y]
type = VolumetricFlowRate
boundary = bottom
vel_x = u
vel_y = v
advected_quantity = v
[]
[mid1_advected_energy]
type = VolumetricFlowRate
boundary = internal_bot
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[mid2_advected_energy]
type = VolumetricFlowRate
boundary = internal_top
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[outlet_advected_energy]
type = VolumetricFlowRate
boundary = top
vel_x = u
vel_y = v
advected_quantity = 'rho_cp_temp'
advected_interp_method = 'upwind'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/heat_conduction/test/tests/gray_lambert_radiator/coupled_heat_conduction.i)
[Problem]
kernel_coverage_check = false
[]
[Mesh]
type = MeshGeneratorMesh
[./cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
ix = '2 2 2'
dy = '5'
iy = '10'
subdomain_id = '1 2 3'
[../]
[./break_sides]
type = BreakBoundaryOnSubdomainGenerator
boundaries = 'bottom top'
input = cartesian
[../]
[./left_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
new_boundary = left_interior
input = break_sides
[../]
[./right_interior]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 2
new_boundary = right_interior
input = left_interior
[../]
[./rename]
type = RenameBlockGenerator
input = right_interior
old_block = '1 2 3'
new_block = '1 4 3'
[../]
[]
[Variables]
[./temperature]
initial_condition = 300
block = '1 3'
[../]
[]
[Kernels]
[./heat_conduction]
type = HeatConduction
variable = temperature
diffusion_coefficient = 1
block = '1 3'
[../]
[]
[UserObjects]
[./cavity_radiation]
type = ConstantViewFactorSurfaceRadiation
boundary = 'left_interior right_interior bottom_to_2 top_to_2'
temperature = temperature
emissivity = '0.8 0.8 0.8 0.8'
adiabatic_boundary = 'bottom_to_2 top_to_2'
# these view factors are made up to exactly balance energy
# transfer through the cavity
view_factors = '0 0.8 0.1 0.1;
0.8 0 0.1 0.1;
0.45 0.45 0 0.1;
0.45 0.45 0.1 0'
execute_on = 'INITIAL LINEAR TIMESTEP_END'
[../]
[]
[BCs]
[./bottom_left]
type = DirichletBC
preset = false
variable = temperature
boundary = bottom_to_1
value = 1500
[../]
[./top_right]
type = DirichletBC
preset = false
variable = temperature
boundary = top_to_3
value = 300
[../]
[./radiation]
type = GrayLambertNeumannBC
variable = temperature
reconstruct_emission = false
surface_radiation_object_name = cavity_radiation
boundary = 'left_interior right_interior'
[../]
[]
[Postprocessors]
[./qdot_left]
type = GrayLambertSurfaceRadiationPP
boundary = left_interior
surface_radiation_object_name = cavity_radiation
return_type = HEAT_FLUX_DENSITY
[../]
[./qdot_right]
type = GrayLambertSurfaceRadiationPP
boundary = right_interior
surface_radiation_object_name = cavity_radiation
return_type = HEAT_FLUX_DENSITY
[../]
[./qdot_top]
type = GrayLambertSurfaceRadiationPP
boundary = top_to_2
surface_radiation_object_name = cavity_radiation
return_type = HEAT_FLUX_DENSITY
[../]
[./qdot_bottom]
type = GrayLambertSurfaceRadiationPP
boundary = bottom_to_2
surface_radiation_object_name = cavity_radiation
return_type = HEAT_FLUX_DENSITY
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/generate_radiation_patch/generate_radiation_patch_grid_2D.i)
[Mesh]
[cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '1 2 3'
ix = '20 20 20'
dy = '5'
iy = '10'
subdomain_id = '1 2 3'
[]
[rotate]
type = TransformGenerator
transform = ROTATE
vector_value = '0 0 -45'
input = cartesian
[]
[patch]
type = PatchSidesetGenerator
boundary = 0
n_patches = 4
input = rotate
partitioner = grid
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-action.i)
mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
h_cv = 1.0
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '5 5'
dy = '1.0'
ix = '50 50'
iy = '20'
subdomain_id = '1 2'
[]
[]
[Variables]
[T_solid]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[Modules]
[NavierStokesFV]
compressibility = 'incompressible'
porous_medium_treatment = true
add_energy_equation = true
density = ${rho}
dynamic_viscosity = ${mu}
thermal_conductivity = ${k}
specific_heat = ${cp}
porosity = 'porosity'
initial_velocity = '${u_inlet} 1e-6 0'
initial_pressure = 0.0
initial_temperature = 0.0
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_function = '${u_inlet} 0'
energy_inlet_types = 'heatflux'
energy_inlet_function = '${fparse u_inlet * rho * cp * T_inlet}'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip symmetry'
energy_wall_types = 'heatflux heatflux'
energy_wall_function = '0 0'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_function = '0.1'
ambient_convection_alpha = ${h_cv}
ambient_temperature = 'T_solid'
[]
[]
[FVKernels]
[solid_energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_solid
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = 'T_solid'
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = ${h_cv}
[]
[]
[FVBCs]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = 150
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-14
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/tensor_mechanics/test/tests/ad_viscoplasticity_stress_update/exact.i)
# This test provides comparison to calculated values from Leblond:1994kl
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
pore_shape_model = spherical
[]
[Mesh]
[./msh]
type = CartesianMeshGenerator
dim = 3
dx = 0.01
dy = 0.01
dz = 0.01
iz = 1
ix = 1
iy = 1
[../]
[./extra_nodeset]
type = ExtraNodesetGenerator
input = msh
new_boundary = 'origin'
coord = '0 0 0'
[]
[]
[Modules/TensorMechanics/Master/All]
strain = FINITE
add_variables = true
generate_output = 'strain_xx strain_yy strain_xy hydrostatic_stress vonmises_stress'
use_automatic_differentiation = true
[]
[Functions]
[./Q_gtn]
type = ParsedFunction
vars = 'avg_vonmises gtn_gauge_stress'
vals = 'avg_vonmises gtn_gauge_stress'
value = 'avg_vonmises/gtn_gauge_stress'
[../]
[./M_gtn]
type = ParsedFunction
vars = 'avg_hydro gtn_gauge_stress'
vals = 'avg_hydro gtn_gauge_stress'
value = 'abs(avg_hydro) / gtn_gauge_stress'
[../]
[./Q_ten]
type = ParsedFunction
vars = 'avg_vonmises ten_gauge_stress'
vals = 'avg_vonmises ten_gauge_stress'
value = 'avg_vonmises/ten_gauge_stress'
[../]
[./M_ten]
type = ParsedFunction
vars = 'avg_hydro ten_gauge_stress'
vals = 'avg_hydro ten_gauge_stress'
value = 'abs(avg_hydro) / ten_gauge_stress'
[../]
[./Q_five]
type = ParsedFunction
vars = 'avg_vonmises five_gauge_stress'
vals = 'avg_vonmises five_gauge_stress'
value = 'avg_vonmises/five_gauge_stress'
[../]
[./M_five]
type = ParsedFunction
vars = 'avg_hydro five_gauge_stress'
vals = 'avg_hydro five_gauge_stress'
value = 'abs(avg_hydro) / five_gauge_stress'
[../]
[./Q_three]
type = ParsedFunction
vars = 'avg_vonmises three_gauge_stress'
vals = 'avg_vonmises three_gauge_stress'
value = 'avg_vonmises / three_gauge_stress'
[../]
[./M_three]
type = ParsedFunction
vars = 'avg_hydro three_gauge_stress'
vals = 'avg_hydro three_gauge_stress'
value = 'abs(avg_hydro) / three_gauge_stress'
[../]
[./Q_two]
type = ParsedFunction
vars = 'avg_vonmises two_gauge_stress'
vals = 'avg_vonmises two_gauge_stress'
value = 'avg_vonmises/two_gauge_stress'
[../]
[./M_two]
type = ParsedFunction
vars = 'avg_hydro two_gauge_stress'
vals = 'avg_hydro two_gauge_stress'
value = 'abs(avg_hydro) / two_gauge_stress'
[../]
[./Q_onepointfive]
type = ParsedFunction
vars = 'avg_vonmises onepointfive_gauge_stress'
vals = 'avg_vonmises onepointfive_gauge_stress'
value = 'avg_vonmises / onepointfive_gauge_stress'
[../]
[./M_onepointfive]
type = ParsedFunction
vars = 'avg_hydro onepointfive_gauge_stress'
vals = 'avg_hydro onepointfive_gauge_stress'
value = 'abs(avg_hydro) / onepointfive_gauge_stress'
[../]
[./Q_one]
type = ParsedFunction
vars = 'avg_vonmises one_gauge_stress'
vals = 'avg_vonmises one_gauge_stress'
value = 'avg_vonmises / one_gauge_stress'
[../]
[./M_one]
type = ParsedFunction
vars = 'avg_hydro one_gauge_stress'
vals = 'avg_hydro one_gauge_stress'
value = 'abs(avg_hydro) / one_gauge_stress'
[../]
[]
[Materials]
[./elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 1e10
poissons_ratio = 0.3
[../]
[./stress]
type = ADComputeMultipleInelasticStress
inelastic_models = 'gtn lps_ten lps_five lps_three lps_two lps_onepointfive lps_one'
outputs = all
extra_stress_names = extra_stress
[../]
[./porosity]
type = ADPorosityFromStrain
initial_porosity = 1e-3
inelastic_strain = 'combined_inelastic_strain'
outputs = 'all'
[../]
[./gtn]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 1 # arbitrary
viscoplasticity_model = GTN
base_name = gtn
outputs = all
relative_tolerance = 1e-30
[../]
[./lps_ten]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 10
base_name = ten
outputs = all
relative_tolerance = 1e-30
[../]
[./lps_five]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 5
base_name = five
outputs = all
relative_tolerance = 1e-30
[../]
[./lps_three]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 3
base_name = three
outputs = all
relative_tolerance = 1e-30
[../]
[./lps_two]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 2
base_name = two
outputs = all
relative_tolerance = 1e-30
[../]
[./lps_onepointfive]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 1.5
base_name = onepointfive
outputs = all
relative_tolerance = 1e-30
[../]
[./lps_one]
type = ADViscoplasticityStressUpdate
coefficient = 0
power = 1
base_name = one
outputs = all
relative_tolerance = 1e-30
[../]
[./const_stress]
type = ComputeExtraStressConstant
extra_stress_tensor = '1 1 1 1 1 1 1 1 1'
outputs = all
[../]
[]
[BCs]
[./no_disp_x]
type = ADDirichletBC
variable = disp_x
boundary = left
value = 0.0
[../]
[./no_disp_y]
type = ADDirichletBC
variable = disp_y
boundary = bottom
value = 0.0
[../]
[./no_disp_z]
type = ADDirichletBC
variable = disp_z
boundary = back
value = 0.0
[../]
[./Pressure]
[./bcs]
boundary = 'top right front'
function = '10^(t/4.5)'
use_automatic_differentiation = true
[../]
[../]
[]
[Executioner]
type = Transient
solve_type = NEWTON
num_steps = 10
nl_abs_tol = 1e-8
[]
[Postprocessors]
[./avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
[../]
[./avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
[../]
[./gtn_gauge_stress]
type = ElementAverageValue
variable = gtn_gauge_stress
outputs = none
[../]
[./0Q_gtn]
type = FunctionValuePostprocessor
function = Q_gtn
[../]
[./0M_gtn]
type = FunctionValuePostprocessor
function = M_gtn
[../]
[./ten_gauge_stress]
type = ElementAverageValue
variable = ten_gauge_stress
outputs = none
[../]
[./1Q_ten]
type = FunctionValuePostprocessor
function = Q_ten
[../]
[./1M_ten]
type = FunctionValuePostprocessor
function = M_ten
[../]
[./five_gauge_stress]
type = ElementAverageValue
variable = five_gauge_stress
outputs = none
[../]
[./2Q_five]
type = FunctionValuePostprocessor
function = Q_five
[../]
[./2M_five]
type = FunctionValuePostprocessor
function = M_five
[../]
[./three_gauge_stress]
type = ElementAverageValue
variable = three_gauge_stress
outputs = none
[../]
[./3Q_three]
type = FunctionValuePostprocessor
function = Q_three
[../]
[./3M_three]
type = FunctionValuePostprocessor
function = M_three
[../]
[./two_gauge_stress]
type = ElementAverageValue
variable = two_gauge_stress
outputs = none
[../]
[./4Q_two]
type = FunctionValuePostprocessor
function = Q_two
[../]
[./4M_two]
type = FunctionValuePostprocessor
function = M_two
[../]
[./onepointfive_gauge_stress]
type = ElementAverageValue
variable = onepointfive_gauge_stress
outputs = none
[../]
[./5Q_onepointfive]
type = FunctionValuePostprocessor
function = Q_onepointfive
[../]
[./5M_onepointfive]
type = FunctionValuePostprocessor
function = M_onepointfive
[../]
[./one_gauge_stress]
type = ElementAverageValue
variable = one_gauge_stress
outputs = none
[../]
[./6Q_one]
type = FunctionValuePostprocessor
function = Q_one
[../]
[./6M_one]
type = FunctionValuePostprocessor
function = M_one
[../]
[]
[Outputs]
csv = true
file_base = exact_spherical_out
[]
(test/tests/meshgenerators/break_mesh_by_block_generator/break_mesh_block_pairs_restricted.i)
[Mesh]
[msh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1 1'
dy = '1'
ix = '1 1 1 1'
iy = 1
subdomain_id = '0 1 2 3'
[]
[split]
input = msh
type = BreakMeshByBlockGenerator
block_pairs = '0 1;
2 3'
split_interface = true
[]
[]
(test/tests/meshgenerators/refine_sideset_generator/test_multi.i)
[Mesh]
[eg]
type = CartesianMeshGenerator
dim = 3
dx = '2 1 1'
dy = '2 3'
dz = '0.4 0.5 0.6 0.7'
ix = '2 1 1'
iy = '2 3'
iz = '1 1 1 1'
subdomain_id = '0 1 1 1
1 2 0 1
0 1 1 1
2 2 2 2
3 3 1 3
1 1 1 1'
[]
[sideset]
type = SideSetsBetweenSubdomainsGenerator
input = eg
primary_block = 1
paired_block = 2
new_boundary = sideset_1
[]
[refine]
type = RefineSidesetGenerator
input = sideset
boundaries = 'sideset_1'
refinement = '2'
boundary_side = 'both'
enable_neighbor_refinement = false
[]
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/break_mesh_by_block_generator/break_mesh_block_restricted.i)
[Mesh]
[msh]
type = CartesianMeshGenerator
dim = 3
dx = '0.25 0.25 0.25 0.25'
dy = '0.25 0.25 0.25 0.25'
dz = '0.25 0.25 0.25 0.25'
subdomain_id = '0 1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24 25
26 27 28 29 30 31 32 33 34 35 36 37 38
39 40 41 42 43 44 45 46 47 48 49 50 51
52 53 54 55 56 57 58 59 60 61 62 63'
[]
[split]
input = msh
type = BreakMeshByBlockGenerator
surrounding_blocks = '16 17 18 19 20 21 22 23 24 25
26 27 28 29 30 31 32 34 35 36 37 38
39 40 41 42 43 44 45 46 47'
add_transition_interface = true
[]
[]
(modules/navier_stokes/test/tests/finite_volume/cns/mms/1d-with-bcs/straight-channel-hllc.i)
[GlobalParams]
fp = fp
[]
[Mesh]
[./gen_mesh]
type = CartesianMeshGenerator
dim = 1
dx = '.1 .1 .1 .1 .1 .5 .1 .1 .1 .1 .1'
# dx = '.1 .1 .1 .1 .1 .1 .1 .1 .1 .1 .1 .1 .1 .1 .1'
[../]
[]
[Modules]
[FluidProperties]
[fp]
type = IdealGasFluidProperties
[]
[]
[]
[Variables]
[rho]
type = MooseVariableFVReal
initial_condition = 1.28969
scaling = 1e3
[]
[rho_u]
type = MooseVariableFVReal
initial_condition = 1.28969
[]
[rho_et]
type = MooseVariableFVReal
initial_condition = 2.525e5
scaling = 1e-2
[]
[]
[FVKernels]
[mass_advection]
type = CNSFVMassHLLC
variable = rho
fp = fp
[]
[momentum_x_advection]
type = CNSFVMomentumHLLC
variable = rho_u
momentum_component = x
fp = fp
[]
[drag]
type = FVReaction
variable = rho_u
rate = 1000
[]
[fluid_energy_advection]
type = CNSFVFluidEnergyHLLC
variable = rho_et
fp = fp
[]
[]
[FVBCs]
[mass_in]
variable = rho
type = CNSFVHLLCSpecifiedMassFluxAndTemperatureMassBC
boundary = left
temperature = 273.15
rhou = 1.28969
[]
[momentum_in]
variable = rho_u
type = CNSFVHLLCSpecifiedMassFluxAndTemperatureMomentumBC
boundary = left
temperature = 273.15
rhou = 1.28969
momentum_component = 'x'
[]
[energy_in]
variable = rho_et
type = CNSFVHLLCSpecifiedMassFluxAndTemperatureFluidEnergyBC
boundary = left
temperature = 273.15
rhou = 1.28969
[]
[mass_out]
variable = rho
type = CNSFVHLLCSpecifiedPressureMassBC
boundary = right
pressure = 1.01e5
[]
[momentum_out]
variable = rho_u
type = CNSFVHLLCSpecifiedPressureMomentumBC
boundary = right
pressure = 1.01e5
momentum_component = 'x'
[]
[energy_out]
variable = rho_et
type = CNSFVHLLCSpecifiedPressureFluidEnergyBC
boundary = right
pressure = 1.01e5
[]
[]
[Materials]
[var_mat]
type = ConservedVarValuesMaterial
rho = rho
rhou = rho_u
rho_et = rho_et
[]
[]
[Executioner]
solve_type = NEWTON
type = Steady
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_max_its = 50
line_search = none
[]
[Outputs]
exodus = true
csv = true
[]
[Debug]
show_var_residual_norms = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/1d-rc.i)
mu=1.1
rho=1.1
advected_interp_method='upwind'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '30 30'
subdomain_id = '1 2'
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/heat_conduction/test/tests/radiative_bcs/ad_radiative_bc_cyl.i)
#
# Thin cylindrical shell with very high thermal conductivity
# so that temperature is almost uniform at 500 K. Radiative
# boundary conditions is applied. Heat flux out of boundary
# 'right' should be 3723.36; this is approached as the mesh
# is refined
#
[Mesh]
type = MeshGeneratorMesh
[cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
ix = '1 10'
dy = '1 1'
subdomain_id = '1 2 1 2'
[]
[remove_1]
type = BlockDeletionGenerator
block = 1
input = cartesian
[]
[readd_left]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(x - 1) < 1e-4'
new_sideset_name = left
input = remove_1
[]
[]
[Problem]
coord_type = RZ
[]
[Variables]
[temp]
initial_condition = 800.0
[]
[]
[Kernels]
[heat]
type = ADHeatConduction
variable = temp
[]
[]
[BCs]
[lefttemp]
type = ADDirichletBC
boundary = left
variable = temp
value = 800
[]
[radiative_bc]
type = ADInfiniteCylinderRadiativeBC
boundary = right
variable = temp
boundary_radius = 2
boundary_emissivity = 0.2
cylinder_radius = 3
cylinder_emissivity = 0.7
Tinfinity = 500
[]
[]
[Materials]
[density]
type = ADGenericConstantMaterial
prop_names = 'density thermal_conductivity'
prop_values = '1 1.0e5'
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason'
line_search = none
nl_rel_tol = 1e-6
nl_abs_tol = 1e-7
[]
[Postprocessors]
[right]
type = ADSideDiffusiveFluxAverage
variable = temp
boundary = right
diffusivity = thermal_conductivity
[]
[min_temp]
type = ElementExtremeValue
variable = temp
value_type = min
[]
[max_temp]
type = ElementExtremeValue
variable = temp
value_type = max
[]
[]
[Outputs]
csv = true
[]
(test/tests/fvbcs/fv_neumannbc/fv_neumannbc.i)
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '5 5'
iy = '5'
subdomain_id = '1 1'
[]
[internal_sideset]
type = ParsedGenerateSideset
combinatorial_geometry = 'x<1.01 & x>0.99'
included_subdomain_ids = 1
new_sideset_name = 'center'
input = 'mesh'
[]
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
block = 1
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[]
[FVBCs]
inactive = 'center'
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 1
[]
[right]
type = FVNeumannBC
variable = u
boundary = right
value = 4
[]
# Internal center sideset, should cause erroring out
[center]
type = FVNeumannBC
variable = u
boundary = center
value = 0
[]
[]
[Executioner]
type = Steady
solve_type = 'Newton'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[Outputs]
exodus = true
[]
(test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_2D.i)
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
ix = '2 1 1'
iy = '2 3'
subdomain_id = '0 1 1 2 2 2'
[../]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/mms/1d-rc.i)
mu=1.1
rho=1.1
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '5 5'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.8
[]
[]
[Problem]
error_on_jacobian_nonzero_reallocation = true
[]
[Functions]
[exact_u]
type = ParsedFunction
value = 'cos((1/2)*x*pi)'
[]
[forcing_u]
type = ADParsedFunction
value = '0.25*pi^2*mu*cos((1/2)*x*pi) - 1.25*pi*rho*sin((1/2)*x*pi)*cos((1/2)*x*pi) + 0.8*cos(x)'
vars = 'mu rho'
vals = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
value = 'sin(x)'
[]
[forcing_p]
type = ParsedFunction
value = '-1/2*pi*rho*sin((1/2)*x*pi)'
vars = 'rho'
vals = '${rho}'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressureFlux
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = 'exact_u'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2Error
variable = u
function = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2p]
variable = pressure
function = exact_p
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
[Outputs]
exodus = true
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_rz_cylinder_mortar.i)
rpv_core_gap_size = 0.2
core_outer_radius = 2
rpv_inner_radius = '${fparse 2 + rpv_core_gap_size}'
rpv_outer_radius = '${fparse 2.5 + rpv_core_gap_size}'
rpv_width = '${fparse rpv_outer_radius - rpv_inner_radius}'
rpv_outer_htc = 10 # W/m^2/K
rpv_outer_Tinf = 300 # K
core_blocks = '1'
rpv_blocks = '3'
[Mesh]
[gmg]
type = CartesianMeshGenerator
dim = 2
dx = '${core_outer_radius} ${rpv_core_gap_size} ${rpv_width}'
ix = '400 1 100'
dy = 1
iy = '5'
[]
[set_block_id1]
type = SubdomainBoundingBoxGenerator
input = gmg
bottom_left = '0 0 0'
top_right = '${core_outer_radius} 1 0'
block_id = 1
location = INSIDE
[]
[rename_core_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id1
primary_block = 1
paired_block = 0
new_boundary = 'core_outer'
[]
[set_block_id3]
type = SubdomainBoundingBoxGenerator
input = rename_core_bdy
bottom_left = '${rpv_inner_radius} 0 0'
top_right = '${rpv_outer_radius} 1 0'
block_id = 3
location = INSIDE
[]
[rename_inner_rpv_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id3
primary_block = 3
paired_block = 0
new_boundary = 'rpv_inner'
[]
# comment out for test without gap
[2d_mesh]
type = BlockDeletionGenerator
input = rename_inner_rpv_bdy
block = 0
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'rpv_inner'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = 2d_mesh
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'core_outer'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
coord_type = RZ
[]
[Variables]
[Tsolid]
initial_condition = 500
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Kernels]
[heat_source]
type = CoupledForce
variable = Tsolid
block = '${core_blocks}'
v = power_density
[]
[heat_conduction]
type = HeatConduction
variable = Tsolid
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = Tsolid
boundary = 'right' # outer RPV
coefficient = ${rpv_outer_htc}
T_infinity = ${rpv_outer_Tinf}
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = Tsolid
boundary = 'rpv_inner'
primary_emissivity = 0.8
secondary_emissivity = 0.8
[]
[conduction]
type = GapFluxModelConduction
temperature = Tsolid
boundary = 'rpv_inner'
gap_conductivity = 0.1
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = Tsolid
primary_boundary = 'core_outer'
primary_subdomain = 10000
secondary_boundary = 'rpv_inner'
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = 'CYLINDER'
[]
[]
[AuxVariables]
[power_density]
block = '${core_blocks}'
initial_condition = 50e3
[]
[]
[Materials]
[simple_mat]
type = HeatConductionMaterial
thermal_conductivity = 34.6 # W/m/K
[]
[]
[Postprocessors]
[Tcore_avg]
type = ElementAverageValue
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${core_blocks}'
[]
[Trpv_avg]
type = ElementAverageValue
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${rpv_blocks}'
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = '${core_blocks}'
[]
[rpv_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = Tsolid
boundary = 'right' # outer RVP
T_fluid = ${rpv_outer_Tinf}
htc = ${rpv_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(rpv_convective_out - ptot) / ptot'
pp_names = 'rpv_convective_out ptot'
[]
[flux_from_core] # converges to ptot as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = core_outer
diffusivity = thermal_conductivity
[]
[flux_into_rpv] # converges to rpv_convective_out as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = rpv_inner
diffusivity = thermal_conductivity
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = 'rpv_inner core_outer'
variable = Tsolid
[]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = ' lu superlu_dist 1e-5 NONZERO '
'1e-15'
snesmf_reuse_base = false
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
l_max_its = 100
line_search = none
[]
[Outputs]
exodus = false
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/2d-rc-friction-action.i)
mu=1.1
rho=1
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '2.5 2.5'
dy = '1.0'
ix = '20 20'
iy = '20'
subdomain_id = '1 2'
[]
[]
[Modules]
[NavierStokesFV]
compressibility = 'incompressible'
porous_medium_treatment = true
density = 'rho'
dynamic_viscosity = 'mu'
porosity = 'porosity'
initial_velocity = '1 1e-6 0'
initial_pressure = 0.0
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_function = '1 0'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip symmetry'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_function = '0'
friction_types = 'darcy forchheimer'
friction_coeffs = 'Darcy_coefficient Forchheimer_coefficient'
[]
[]
[Materials]
[const]
type = ADGenericFunctorMaterial
prop_names = 'rho mu'
prop_values = '${rho} ${mu}'
[]
[friction]
type = ADGenericVectorFunctorMaterial
prop_names = 'Darcy_coefficient Forchheimer_coefficient'
prop_values = '0.1 0.1 0.1 0.1 0.1 0.1'
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 200 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-14
[]
# Some basic Postprocessors to visually examine the solution
[Postprocessors]
[inlet-p]
type = SideIntegralVariablePostprocessor
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = superficial_vel_x
boundary = 'right'
[]
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/radiative_bcs/radiative_bc_cyl.i)
#
# Thin cylindrical shell with very high thermal conductivity
# so that temperature is almost uniform at 500 K. Radiative
# boundary conditions is applied. Heat flux out of boundary
# 'right' should be 3723.36; this is approached as the mesh
# is refined
#
[Mesh]
type = MeshGeneratorMesh
[./cartesian]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
ix = '1 10'
dy = '1 1'
subdomain_id = '1 2 1 2'
[../]
[./remove_1]
type = BlockDeletionGenerator
block = 1
input = cartesian
[../]
[./readd_left]
type = ParsedGenerateSideset
combinatorial_geometry = 'abs(x - 1) < 1e-4'
new_sideset_name = left
input = remove_1
[../]
[]
[Problem]
coord_type = RZ
[]
[Variables]
[./temp]
initial_condition = 800.0
[../]
[]
[Kernels]
[./heat]
type = HeatConduction
variable = temp
[../]
[]
[BCs]
[./lefttemp]
type = DirichletBC
boundary = left
variable = temp
value = 800
[../]
[./radiative_bc]
type = InfiniteCylinderRadiativeBC
boundary = right
variable = temp
boundary_radius = 2
boundary_emissivity = 0.2
cylinder_radius = 3
cylinder_emissivity = 0.7
Tinfinity = 500
[../]
[]
[Materials]
[./density]
type = GenericConstantMaterial
prop_names = 'density thermal_conductivity'
prop_values = '1 1.0e5'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
[../]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason'
line_search = none
nl_rel_tol = 1e-6
nl_abs_tol = 1e-7
[]
[Postprocessors]
[./right]
type = SideDiffusiveFluxAverage
variable = temp
boundary = right
diffusivity = thermal_conductivity
[../]
[./min_temp]
type = ElementExtremeValue
variable = temp
value_type = min
[../]
[./max_temp]
type = ElementExtremeValue
variable = temp
value_type = max
[../]
[]
[Outputs]
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/2d-rc-epsjump.i)
mu=1.1
rho=1.1
advected_interp_method='upwind'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '0.5'
ix = '30 30'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
porosity = porosity
pressure = pressure
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
[]
[]
[ICs]
inactive = 'porosity_continuous'
[porosity_1]
type = ConstantIC
variable = porosity
block = 1
value = 1
[]
[porosity_2]
type = ConstantIC
variable = porosity
block = 2
value = 0.5
[]
[porosity_continuous]
type = FunctionIC
variable = porosity
block = '1 2'
function = smooth_jump
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
value = '1 - 0.5 * 1 / (1 + exp(-30*(x-1)))'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
pressure = pressure
porosity = porosity
momentum_component = 'y'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[walls-u]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = u
momentum_component = 'x'
[]
[walls-v]
type = INSFVNaturalFreeSlipBC
boundary = 'top bottom'
variable = v
momentum_component = 'y'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.4
[]
[]
[Materials]
inactive = 'smooth'
[jump]
type = ADPiecewiseByBlockFunctorMaterial
prop_name = 'porosity'
subdomain_to_prop_value = '1 1
2 0.5'
[]
[smooth]
type = ADGenericFunctionFunctorMaterial
prop_names = 'porosity'
prop_values = 'smooth_jump'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-10
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/mesh/face_info/face_info_two_region_quads.i)
[Mesh]
[./generated]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1 1'
subdomain_id = '1 2 2 2'
[../]
[]
[Problem]
kernel_coverage_check = false
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
block = 1
[../]
[./v]
family = MONOMIAL
order = CONSTANT
block = 2
[../]
[./w]
family = MONOMIAL
order = CONSTANT
[../]
[_trigger_fv_on]
fv = true
family = MONOMIAL
order = CONSTANT
[]
[]
[VectorPostprocessors]
[./face_info_1]
type = TestFaceInfo
vars = 'u'
[../]
[./face_info_2]
type = TestFaceInfo
vars = 'v'
[../]
[./face_info_3]
type = TestFaceInfo
vars = 'w'
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
csv = true
[]
(test/tests/meshgenerators/cartesian_mesh_generator/cartesian_mesh_1D.i)
[Mesh]
[./cmg]
type = CartesianMeshGenerator
dim = 1
dx = '1.5 2.4 0.1'
ix = '2 1 1'
subdomain_id = '0 2 1'
[../]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/porosity_jump/1d-rc-epsjump.i)
mu=1.1
rho=1.1
advected_interp_method='upwind'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 1
dx = '1 1'
ix = '30 30'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[AuxVariables]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[ICs]
inactive = 'porosity_continuous'
[porosity_1]
type = ConstantIC
variable = porosity
block = 1
value = 1
[]
[porosity_2]
type = ConstantIC
variable = porosity
block = 2
value = 0.5
[]
[porosity_continuous]
type = FunctionIC
variable = porosity
block = '1 2'
function = smooth_jump
[]
[]
[Functions]
[smooth_jump]
type = ParsedFunction
value = '1 - 0.5 * 1 / (1 + exp(-30*(x-1)))'
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
pressure = pressure
porosity = porosity
momentum_component = 'x'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
[]
[Postprocessors]
[inlet_p]
type = SideAverageValue
variable = 'pressure'
boundary = 'left'
[]
[outlet-u]
type = SideIntegralVariablePostprocessor
variable = u
boundary = 'right'
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/meshgenerators/fancy_extruder_generator/fancy_extruder_then_parsed_gen_sideset.i)
[Mesh]
[file]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1 1'
dy = '1 1'
subdomain_id = '1 2 3 4
1 2 3 4'
[]
[extrude]
type = FancyExtruderGenerator
direction = '0 0 1'
heights = '1 1 1'
num_layers = '1 1 1'
input = file
[]
[add_side]
type = ParsedGenerateSideset
combinatorial_geometry = '2 > 1'
new_sideset_name = new_s
included_subdomain_ids = 1
included_neighbor_ids = 2
input = extrude
[]
[]