- variableThe name of the variable that this residual object operates on
C++ Type:NonlinearVariableName
Controllable:No
Description:The name of the variable that this residual object operates on
INSADEnergyAdvection
This object adds a term, likely to a heat conduction-convection equation, where is the density, is the specific heat capacity, is the velocity (represented by _U in the code), and is the temperature gradient (represented by _grad_u in the code).
This class computes the residual and Jacobian contributions for temperature advection for a divergence free velocity field.
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- displacementsThe displacements
C++ Type:std::vector<VariableName>
Controllable:No
Description:The displacements
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- diag_save_inThe name of auxiliary variables to save this Kernel's diagonal Jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
C++ Type:std::vector<AuxVariableName>
Controllable:No
Description:The name of auxiliary variables to save this Kernel's diagonal Jacobian contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- save_inThe name of auxiliary variables to save this Kernel's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
C++ Type:std::vector<AuxVariableName>
Controllable:No
Description:The name of auxiliary variables to save this Kernel's residual contributions to. Everything about that variable must match everything about this variable (the type, what blocks it's on, etc.)
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Tagging Parameters
Input Files
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp.i)
- (modules/navier_stokes/test/tests/finite_element/ins/boussinesq/benchmark/benchmark.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/mixed-transient-steady/mixed.i)
- (modules/navier_stokes/test/tests/finite_element/ins/block-restriction/two-mats-two-eqn-sets.i)
- (modules/navier_stokes/test/tests/finite_element/ins/boussinesq/boussinesq_square.i)
- (modules/navier_stokes/test/tests/finite_element/ins/boussinesq/boussinesq_stabilized.i)
- (modules/navier_stokes/test/tests/finite_element/ins/block-restriction/one-mat-two-eqn-sets.i)
- (modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_mean_zero_pressure.i)
- (modules/navier_stokes/test/tests/finite_element/ins/wall_convection/steady.i)
- (modules/navier_stokes/test/tests/finite_element/ins/block-restriction/two-mats-one-eqn-set.i)
- (modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady-var.i)
- (modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp_transient.i)
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/boussinesq/benchmark/benchmark.i)
rayleigh=1e3
hot_temp=${rayleigh}
temp_ref=${fparse hot_temp / 2.}
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 100
ny = 100
[]
[./bottom_left]
type = ExtraNodesetGenerator
new_boundary = corner
coord = '0 0'
input = gen
[../]
[]
[Preconditioning]
[./Newton_SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-12
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'bjacobi lu NONZERO 200'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[out]
type = Exodus
[]
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
[]
[p][]
[temp]
initial_condition = 340
scaling = 1e-4
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[BCs]
[./velocity_dirichlet]
type = VectorDirichletBC
boundary = 'left right bottom top'
variable = velocity
# The third entry is to satisfy RealVectorValue
values = '0 0 0'
[../]
# Even though we are integrating by parts, because there are no integrated
# boundary conditions on the velocity p doesn't appear in the system of
# equations. Thus we must pin the pressure somewhere in order to ensure a
# unique solution
[./p_zero]
type = DirichletBC
boundary = corner
variable = p
value = 0
[../]
[./hot]
type = DirichletBC
variable = temp
boundary = left
value = ${hot_temp}
[../]
[./cold]
type = DirichletBC
variable = temp
boundary = right
value = 0
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[]
[./buoyancy]
type = INSADBoussinesqBodyForce
variable = velocity
temperature = temp
gravity = '0 -1 0'
[../]
[./gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 -1 0'
[../]
[supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[temp_advection]
type = INSADEnergyAdvection
variable = temp
[]
[temp_conduction]
type = ADHeatConduction
variable = temp
thermal_conductivity = 'k'
[../]
[temp_supg]
type = INSADEnergySUPG
variable = temp
velocity = velocity
[]
[]
[Materials]
[./ad_const]
type = ADGenericConstantMaterial
# alpha = coefficient of thermal expansion where rho = rho0 -alpha * rho0 * delta T
prop_names = 'mu rho alpha k cp'
prop_values = '1 1 1 1 1'
[../]
[./const]
type = GenericConstantMaterial
prop_names = 'temp_ref'
prop_values = '${temp_ref}'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temp
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/mixed-transient-steady/mixed.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature]
[InitialCondition]
type = ConstantIC
value = 1.0
[]
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/block-restriction/two-mats-two-eqn-sets.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = 0
ymax = 1
nx = 16
ny = 8
elem_type = QUAD9
[]
[./corner_node_0]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node_0'
coord = '0 0 0'
input = gen
[../]
[./corner_node_1]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node_1'
coord = '1 0 0'
input = corner_node_0
[../]
[./subdomain1]
input = corner_node_1
type = SubdomainBoundingBoxGenerator
bottom_left = '1 0 0'
top_right = '2 1 0'
block_id = 1
[../]
[./break_boundary]
input = subdomain1
type = BreakBoundaryOnSubdomainGenerator
[../]
[./interface0]
type = SideSetsBetweenSubdomainsGenerator
input = break_boundary
primary_block = '0'
paired_block = '1'
new_boundary = 'interface0'
[../]
[./interface1]
type = SideSetsBetweenSubdomainsGenerator
input = interface0
primary_block = '1'
paired_block = '0'
new_boundary = 'interface1'
[../]
[]
[Variables]
[velocity0]
order = SECOND
family = LAGRANGE_VEC
block = 0
[]
[T0]
order = SECOND
[InitialCondition]
type = ConstantIC
value = 1.0
[]
block = 0
[]
[p0]
block = 0
[]
[velocity1]
order = SECOND
family = LAGRANGE_VEC
block = 1
[]
[T1]
order = SECOND
[InitialCondition]
type = ConstantIC
value = 1.0
[]
block = 1
[]
[p1]
block = 1
[]
[]
[Kernels]
[./mass0]
type = INSADMass
variable = p0
block = 0
[../]
[./momentum_time0]
type = INSADMomentumTimeDerivative
variable = velocity0
block = 0
[../]
[./momentum_convection0]
type = INSADMomentumAdvection
variable = velocity0
block = 0
[../]
[./momentum_viscous0]
type = INSADMomentumViscous
variable = velocity0
block = 0
[../]
[./momentum_pressure0]
type = INSADMomentumPressure
variable = velocity0
pressure = p0
integrate_p_by_parts = true
block = 0
[../]
[./temperature_time0]
type = INSADHeatConductionTimeDerivative
variable = T0
block = 0
[../]
[./temperature_advection0]
type = INSADEnergyAdvection
variable = T0
block = 0
[../]
[./temperature_conduction0]
type = ADHeatConduction
variable = T0
thermal_conductivity = 'k'
block = 0
[../]
[./mass1]
type = INSADMass
variable = p1
block = 1
[../]
[./momentum_time1]
type = INSADMomentumTimeDerivative
variable = velocity1
block = 1
[../]
[./momentum_convection1]
type = INSADMomentumAdvection
variable = velocity1
block = 1
[../]
[./momentum_viscous1]
type = INSADMomentumViscous
variable = velocity1
block = 1
[../]
[./momentum_pressure1]
type = INSADMomentumPressure
variable = velocity1
pressure = p1
integrate_p_by_parts = true
block = 1
[../]
[./temperature_time1]
type = INSADHeatConductionTimeDerivative
variable = T1
block = 1
[../]
[./temperature_advection1]
type = INSADEnergyAdvection
variable = T1
block = 1
[../]
[./temperature_conduction1]
type = ADHeatConduction
variable = T1
thermal_conductivity = 'k'
block = 1
[../]
[]
[BCs]
[./no_slip0]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'bottom_to_0 interface0 left'
[../]
[./lid0]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'top_to_0'
function_x = 'lid_function0'
[../]
[./T_hot0]
type = DirichletBC
variable = T0
boundary = 'bottom_to_0'
value = 1
[../]
[./T_cold0]
type = DirichletBC
variable = T0
boundary = 'top_to_0'
value = 0
[../]
[./pressure_pin0]
type = DirichletBC
variable = p0
boundary = 'pinned_node_0'
value = 0
[../]
[./no_slip1]
type = VectorFunctionDirichletBC
variable = velocity1
boundary = 'bottom_to_1 interface1 right'
[../]
[./lid1]
type = VectorFunctionDirichletBC
variable = velocity1
boundary = 'top_to_1'
function_x = 'lid_function1'
[../]
[./T_hot1]
type = DirichletBC
variable = T1
boundary = 'bottom_to_1'
value = 1
[../]
[./T_cold1]
type = DirichletBC
variable = T1
boundary = 'top_to_1'
value = 0
[../]
[./pressure_pin1]
type = DirichletBC
variable = p1
boundary = 'pinned_node_1'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat0]
type = INSAD3Eqn
velocity = velocity0
pressure = p0
temperature = T0
block = 0
[]
[ins_mat1]
type = INSAD3Eqn
velocity = velocity1
pressure = p1
temperature = T1
block = 1
[]
[]
[Functions]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
[./lid_function0]
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[./lid_function1]
type = ParsedFunction
value = '4*(x-1)*(2-x)'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -sub_pc_factor_levels -sub_pc_factor_shift_type'
petsc_options_value = 'asm 2 ilu 4 NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/boussinesq/boussinesq_square.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmax = .05
ymax = .05
nx = 20
ny = 20
elem_type = QUAD9
[]
[./bottom_left]
type = ExtraNodesetGenerator
new_boundary = corner
coord = '0 0'
input = gen
[../]
[]
[Preconditioning]
[./Newton_SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-12
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'bjacobi lu NONZERO 200'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[out]
type = Exodus
execute_on = 'final'
[]
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
order = SECOND
[]
[p][]
[./temp]
order = SECOND
initial_condition = 340
scaling = 1e-4
[../]
[]
[BCs]
[./velocity_dirichlet]
type = VectorDirichletBC
boundary = 'left right bottom top'
variable = velocity
# The third entry is to satisfy RealVectorValue
values = '0 0 0'
[../]
# Even though we are integrating by parts, because there are no integrated
# boundary conditions on the velocity p doesn't appear in the system of
# equations. Thus we must pin the pressure somewhere in order to ensure a
# unique solution
[./p_zero]
type = DirichletBC
boundary = corner
variable = p
value = 0
[../]
[./cold]
type = DirichletBC
variable = temp
boundary = left
value = 300
[../]
[./hot]
type = DirichletBC
variable = temp
boundary = right
value = 400
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[]
[temp_advection]
type = INSADEnergyAdvection
variable = temp
[]
[temp_conduction]
type = ADHeatConduction
variable = temp
thermal_conductivity = 'k'
[../]
[./buoyancy]
type = INSADBoussinesqBodyForce
variable = velocity
temperature = temp
gravity = '0 -9.81 0'
[../]
[./gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 -9.81 0'
[../]
[]
[Materials]
[./ad_const]
type = ADGenericConstantMaterial
# alpha = coefficient of thermal expansion where rho = rho0 -alpha * rho0 * delta T
prop_names = 'mu rho alpha k cp'
prop_values = '30.74e-6 .5757 2.9e-3 46.38e-3 1054'
[../]
[./const]
type = GenericConstantMaterial
prop_names = 'temp_ref'
prop_values = '900'
[../]
[ins_mat]
type = INSAD3Eqn
velocity = velocity
pressure = p
temperature = temp
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/boussinesq/boussinesq_stabilized.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmax = .05
ymax = .05
nx = 20
ny = 20
elem_type = QUAD9
[]
[./bottom_left]
type = ExtraNodesetGenerator
new_boundary = corner
coord = '0 0'
input = gen
[../]
[]
[Preconditioning]
[./Newton_SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-12
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'bjacobi lu NONZERO 200'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
[out]
type = Exodus
execute_on = 'final'
[]
[]
[Variables]
[velocity]
family = LAGRANGE_VEC
[]
[p][]
[temp]
initial_condition = 340
scaling = 1e-4
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[BCs]
[./velocity_dirichlet]
type = VectorDirichletBC
boundary = 'left right bottom top'
variable = velocity
# The third entry is to satisfy RealVectorValue
values = '0 0 0'
[../]
# Even though we are integrating by parts, because there are no integrated
# boundary conditions on the velocity p doesn't appear in the system of
# equations. Thus we must pin the pressure somewhere in order to ensure a
# unique solution
[./p_zero]
type = DirichletBC
boundary = corner
variable = p
value = 0
[../]
[./cold]
type = DirichletBC
variable = temp
boundary = left
value = 300
[../]
[./hot]
type = DirichletBC
variable = temp
boundary = right
value = 400
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[mass_pspg]
type = INSADMassPSPG
variable = p
[]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[momentum_advection]
type = INSADMomentumAdvection
variable = velocity
[]
[momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[]
[./buoyancy]
type = INSADBoussinesqBodyForce
variable = velocity
temperature = temp
gravity = '0 -9.81 0'
[../]
[./gravity]
type = INSADGravityForce
variable = velocity
gravity = '0 -9.81 0'
[../]
[supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[]
[temp_advection]
type = INSADEnergyAdvection
variable = temp
[]
[temp_conduction]
type = ADHeatConduction
variable = temp
thermal_conductivity = 'k'
[../]
[temp_supg]
type = INSADEnergySUPG
variable = temp
velocity = velocity
[]
[]
[Materials]
[./ad_const]
type = ADGenericConstantMaterial
# alpha = coefficient of thermal expansion where rho = rho0 -alpha * rho0 * delta T
prop_names = 'mu rho alpha k cp'
prop_values = '30.74e-6 .5757 2.9e-3 46.38e-3 1054'
[../]
[./const]
type = GenericConstantMaterial
prop_names = 'temp_ref'
prop_values = '900'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temp
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/block-restriction/one-mat-two-eqn-sets.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = 0
ymax = 1
nx = 16
ny = 8
elem_type = QUAD9
[]
[./corner_node_0]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node_0'
coord = '0 0 0'
input = gen
[../]
[./corner_node_1]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node_1'
coord = '1 0 0'
input = corner_node_0
[../]
[./subdomain1]
input = corner_node_1
type = SubdomainBoundingBoxGenerator
bottom_left = '1 0 0'
top_right = '2 1 0'
block_id = 1
[../]
[./break_boundary]
input = subdomain1
type = BreakBoundaryOnSubdomainGenerator
[../]
[./interface0]
type = SideSetsBetweenSubdomainsGenerator
input = break_boundary
primary_block = '0'
paired_block = '1'
new_boundary = 'interface0'
[../]
[./interface1]
type = SideSetsBetweenSubdomainsGenerator
input = interface0
primary_block = '1'
paired_block = '0'
new_boundary = 'interface1'
[../]
[]
[Variables]
[velocity0]
order = SECOND
family = LAGRANGE_VEC
[]
[T0]
order = SECOND
[InitialCondition]
type = ConstantIC
value = 1.0
[]
[]
[p0]
[]
[]
[Kernels]
[./mass0]
type = INSADMass
variable = p0
block = 0
[../]
[./momentum_time0]
type = INSADMomentumTimeDerivative
variable = velocity0
block = 0
[../]
[./momentum_convection0]
type = INSADMomentumAdvection
variable = velocity0
block = 0
[../]
[./momentum_viscous0]
type = INSADMomentumViscous
variable = velocity0
block = 0
[../]
[./momentum_pressure0]
type = INSADMomentumPressure
variable = velocity0
pressure = p0
integrate_p_by_parts = true
block = 0
[../]
[./temperature_time0]
type = INSADHeatConductionTimeDerivative
variable = T0
block = 0
[../]
[./temperature_advection0]
type = INSADEnergyAdvection
variable = T0
block = 0
[../]
[./temperature_conduction0]
type = ADHeatConduction
variable = T0
thermal_conductivity = 'k'
block = 0
[../]
[./mass1]
type = INSADMass
variable = p0
block = 1
[../]
[./momentum_time1]
type = INSADMomentumTimeDerivative
variable = velocity0
block = 1
[../]
[./momentum_convection1]
type = INSADMomentumAdvection
variable = velocity0
block = 1
[../]
[./momentum_viscous1]
type = INSADMomentumViscous
variable = velocity0
block = 1
[../]
[./momentum_pressure1]
type = INSADMomentumPressure
variable = velocity0
pressure = p0
integrate_p_by_parts = true
block = 1
[../]
[./temperature_time1]
type = INSADHeatConductionTimeDerivative
variable = T0
block = 1
[../]
[./temperature_advection1]
type = INSADEnergyAdvection
variable = T0
block = 1
[../]
[./temperature_conduction1]
type = ADHeatConduction
variable = T0
thermal_conductivity = 'k'
block = 1
[../]
[]
[BCs]
[./no_slip0]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'bottom_to_0 interface0 left'
[../]
[./lid0]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'top_to_0'
function_x = 'lid_function0'
[../]
[./T_hot0]
type = DirichletBC
variable = T0
boundary = 'bottom_to_0'
value = 1
[../]
[./T_cold0]
type = DirichletBC
variable = T0
boundary = 'top_to_0'
value = 0
[../]
[./pressure_pin0]
type = DirichletBC
variable = p0
boundary = 'pinned_node_0'
value = 0
[../]
[./no_slip1]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'bottom_to_1 interface1 right'
[../]
[./lid1]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'top_to_1'
function_x = 'lid_function1'
[../]
[./T_hot1]
type = DirichletBC
variable = T0
boundary = 'bottom_to_1'
value = 1
[../]
[./T_cold1]
type = DirichletBC
variable = T0
boundary = 'top_to_1'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat0]
type = INSAD3Eqn
velocity = velocity0
pressure = p0
temperature = T0
block = '0 1'
[]
[]
[Functions]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
[./lid_function0]
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[./lid_function1]
type = ParsedFunction
value = '4*(x-1)*(2-x)'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -sub_pc_factor_levels -sub_pc_factor_shift_type'
petsc_options_value = 'asm 2 ilu 4 NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_source]
type = INSADEnergySource
variable = temperature
source_function = 1
[]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
elem_type = QUAD9
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[AuxVariables]
[vel_x]
order = SECOND
[]
[vel_y]
order = SECOND
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
order = SECOND
family = LAGRANGE_VEC
[../]
[./T]
order = SECOND
[./InitialCondition]
type = ConstantIC
value = 1.0
[../]
[../]
[./p]
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./temperature_time]
type = INSADHeatConductionTimeDerivative
variable = T
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = T
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = T
thermal_conductivity = 'k'
[../]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./T_hot]
type = DirichletBC
variable = T
boundary = 'bottom'
value = 1
[../]
[./T_cold]
type = DirichletBC
variable = T
boundary = 'top'
value = 0
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSAD3Eqn
velocity = velocity
pressure = p
temperature = T
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -sub_pc_factor_levels'
petsc_options_value = 'asm 2 ilu 4'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
file_base = lid_driven_out
exodus = true
perf_graph = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_mean_zero_pressure.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
elem_type = QUAD9
[]
[]
[AuxVariables]
[vel_x]
order = SECOND
[]
[vel_y]
order = SECOND
[]
[]
[AuxKernels]
[vel_x]
type = VectorVariableComponentAux
variable = vel_x
vector_variable = velocity
component = 'x'
[]
[vel_y]
type = VectorVariableComponentAux
variable = vel_y
vector_variable = velocity
component = 'y'
[]
[]
[Variables]
[./velocity]
order = SECOND
family = LAGRANGE_VEC
[../]
[./T]
order = SECOND
[./InitialCondition]
type = ConstantIC
value = 1.0
[../]
[../]
[./p]
[../]
[./lambda]
family = SCALAR
order = FIRST
[../]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./temperature_time]
type = INSADHeatConductionTimeDerivative
variable = T
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = T
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = T
thermal_conductivity = 'k'
[../]
[./mean_zero_pressure]
type = ScalarLagrangeMultiplier
variable = p
lambda = lambda
[../]
[]
[ScalarKernels]
[./mean_zero_pressure_lm]
type = AverageValueConstraint
variable = lambda
pp_name = pressure_integral
value = 0
[../]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./T_hot]
type = DirichletBC
variable = T
boundary = 'bottom'
value = 1
[../]
[./T_cold]
type = DirichletBC
variable = T
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSAD3Eqn
velocity = velocity
pressure = p
temperature = T
[]
[]
[Postprocessors]
[./pressure_integral]
type = ElementIntegralVariablePostprocessor
variable = p
execute_on = linear
[../]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -sub_pc_factor_levels -sub_pc_factor_shift_type'
petsc_options_value = 'asm 2 ilu 4 NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
exodus = true
perf_graph = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/wall_convection/steady.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_ambient_convection]
type = INSADEnergyAmbientConvection
variable = temperature
alpha = 1
T_ambient = 0.5
[]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/block-restriction/two-mats-one-eqn-set.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = 0
ymax = 1
nx = 16
ny = 8
elem_type = QUAD9
[]
[./corner_node_0]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node_0'
coord = '0 0 0'
input = gen
[../]
[./corner_node_1]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node_1'
coord = '1 0 0'
input = corner_node_0
[../]
[./subdomain1]
input = corner_node_1
type = SubdomainBoundingBoxGenerator
bottom_left = '1 0 0'
top_right = '2 1 0'
block_id = 1
[../]
[./break_boundary]
input = subdomain1
type = BreakBoundaryOnSubdomainGenerator
[../]
[./interface0]
type = SideSetsBetweenSubdomainsGenerator
input = break_boundary
primary_block = '0'
paired_block = '1'
new_boundary = 'interface0'
[../]
[./interface1]
type = SideSetsBetweenSubdomainsGenerator
input = interface0
primary_block = '1'
paired_block = '0'
new_boundary = 'interface1'
[../]
[]
[Variables]
[velocity0]
order = SECOND
family = LAGRANGE_VEC
[]
[T0]
order = SECOND
[InitialCondition]
type = ConstantIC
value = 1.0
[]
[]
[p0]
[]
[]
[Kernels]
[./mass0]
type = INSADMass
variable = p0
[../]
[./momentum_time0]
type = INSADMomentumTimeDerivative
variable = velocity0
[../]
[./momentum_convection0]
type = INSADMomentumAdvection
variable = velocity0
[../]
[./momentum_viscous0]
type = INSADMomentumViscous
variable = velocity0
[../]
[./momentum_pressure0]
type = INSADMomentumPressure
variable = velocity0
pressure = p0
integrate_p_by_parts = true
[../]
[./temperature_time0]
type = INSADHeatConductionTimeDerivative
variable = T0
[../]
[./temperature_advection0]
type = INSADEnergyAdvection
variable = T0
[../]
[./temperature_conduction0]
type = ADHeatConduction
variable = T0
thermal_conductivity = 'k'
[../]
[]
[BCs]
[./no_slip0]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'bottom_to_0 interface0 left'
[../]
[./lid0]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'top_to_0'
function_x = 'lid_function0'
[../]
[./T_hot0]
type = DirichletBC
variable = T0
boundary = 'bottom_to_0'
value = 1
[../]
[./T_cold0]
type = DirichletBC
variable = T0
boundary = 'top_to_0'
value = 0
[../]
[./pressure_pin0]
type = DirichletBC
variable = p0
boundary = 'pinned_node_0'
value = 0
[../]
[./no_slip1]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'bottom_to_1 interface1 right'
[../]
[./lid1]
type = VectorFunctionDirichletBC
variable = velocity0
boundary = 'top_to_1'
function_x = 'lid_function1'
[../]
[./T_hot1]
type = DirichletBC
variable = T0
boundary = 'bottom_to_1'
value = 1
[../]
[./T_cold1]
type = DirichletBC
variable = T0
boundary = 'top_to_1'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat0]
type = INSAD3Eqn
velocity = velocity0
pressure = p0
temperature = T0
block = '0'
[]
[ins_mat1]
type = INSAD3Eqn
velocity = velocity0
pressure = p0
temperature = T0
block = '1'
[]
[]
[Functions]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
[./lid_function0]
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[./lid_function1]
type = ParsedFunction
value = '4*(x-1)*(2-x)'
[../]
[]
[Preconditioning]
[./SMP]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Transient
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -sub_pc_factor_levels -sub_pc_factor_shift_type'
petsc_options_value = 'asm 2 ilu 4 NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
nl_max_its = 6
l_tol = 1e-6
l_max_its = 500
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_element/ins/energy_source/steady-var.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[AuxVariables]
[u]
initial_condition = 1
[]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature][]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_source]
type = INSADEnergySource
variable = temperature
source_variable = u
[]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
[out]
type = Exodus
hide = 'u'
[]
[]
(modules/navier_stokes/test/tests/finite_element/ins/lid_driven/ad_lid_driven_stabilized_with_temp_transient.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1.0
ymin = 0
ymax = 1.0
nx = 16
ny = 16
[]
[./corner_node]
type = ExtraNodesetGenerator
new_boundary = 'pinned_node'
nodes = '0'
input = gen
[../]
[]
[Variables]
[./velocity]
family = LAGRANGE_VEC
[../]
[./p]
[../]
[temperature]
[InitialCondition]
type = ConstantIC
value = 1.0
[]
[]
[]
[ICs]
[velocity]
type = VectorConstantIC
x_value = 1e-15
y_value = 1e-15
variable = velocity
[]
[]
[Kernels]
[./mass]
type = INSADMass
variable = p
[../]
[./mass_pspg]
type = INSADMassPSPG
variable = p
[../]
[./momentum_time]
type = INSADMomentumTimeDerivative
variable = velocity
[../]
[./momentum_convection]
type = INSADMomentumAdvection
variable = velocity
[../]
[./momentum_viscous]
type = INSADMomentumViscous
variable = velocity
[../]
[./momentum_pressure]
type = INSADMomentumPressure
variable = velocity
pressure = p
integrate_p_by_parts = true
[../]
[./momentum_supg]
type = INSADMomentumSUPG
variable = velocity
velocity = velocity
[../]
[./temperature_advection]
type = INSADEnergyAdvection
variable = temperature
[../]
[temperature_time]
type = INSADHeatConductionTimeDerivative
variable = temperature
[]
[./temperature_conduction]
type = ADHeatConduction
variable = temperature
thermal_conductivity = 'k'
[../]
[temperature_supg]
type = INSADEnergySUPG
variable = temperature
velocity = velocity
[]
[]
[BCs]
[./no_slip]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'bottom right left'
[../]
[./lid]
type = VectorFunctionDirichletBC
variable = velocity
boundary = 'top'
function_x = 'lid_function'
[../]
[./pressure_pin]
type = DirichletBC
variable = p
boundary = 'pinned_node'
value = 0
[../]
[./temperature_hot]
type = DirichletBC
variable = temperature
boundary = 'bottom'
value = 1
[../]
[./temperature_cold]
type = DirichletBC
variable = temperature
boundary = 'top'
value = 0
[../]
[]
[Materials]
[./const]
type = ADGenericConstantMaterial
prop_names = 'rho mu cp k'
prop_values = '1 1 1 .01'
[../]
[ins_mat]
type = INSADStabilized3Eqn
velocity = velocity
pressure = p
temperature = temperature
[]
[]
[Functions]
[./lid_function]
# We pick a function that is exactly represented in the velocity
# space so that the Dirichlet conditions are the same regardless
# of the mesh spacing.
type = ParsedFunction
value = '4*x*(1-x)'
[../]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -sub_pc_factor_levels -ksp_gmres_restart'
petsc_options_value = 'asm 6 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_abs_tol = 1e-12
nl_max_its = 6
[]
[Outputs]
exodus = true
[]