- coeffdiffusion coefficient
C++ Type:MooseFunctorName
Controllable:No
Description:diffusion coefficient
- variableThe name of the finite volume variable this kernel applies to
C++ Type:NonlinearVariableName
Controllable:No
Description:The name of the finite volume variable this kernel applies to
FVDiffusion
Computes residual for diffusion operator for finite volume method.
The steady-state diffusion equation on a domain is defined as
with the diffusion coefficient or diffusivity. has to be supplied as material property to this kernel.
The diffusion term is integrated using the divergence theorem, turning it from a volumetric second order derivative term into a first order derivative integrated over a surface.
where is the surface normal on each side of the element considered.
commentnote
Unless specified otherwise using the force_boundary_execution or boundaries_to_force parameter, this kernel is not executed on variable boundaries. Unless a boundary condition is specified instead, this is equivalent to specifying a zero diffusive flux through the boundary.
commentnote
This kernel leverages the automatic differentiation system, so the Jacobian is computed at the same time as the residual and need not be defined separately.
Example input syntax
This example shows a simple 1D diffusion problem with two variables defined on two subdomains. Because of the limits of the legacy material system, the two material properties have to have different names, otherwise it is not clear what the boundary value of the diffusion coefficient should be.
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 20
xmax = 2
[]
[./subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[../]
[./left_right]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'left_right'
[../]
[./right_left]
input = left_right
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'right_left'
[../]
[]
[Variables]
[left]
family = MONOMIAL
order = CONSTANT
fv = true
block = 0
[]
[right]
family = MONOMIAL
order = CONSTANT
fv = true
block = 1
[]
[]
[FVKernels]
[left]
type = FVDiffusion
variable = left
coeff = coeff_left
block = 0
[]
[right]
type = FVDiffusion
variable = right
coeff = coeff_right
block = 1
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = left
boundary = left
value = 0
[]
[left_right]
type = FVDirichletBC
variable = left
boundary = left_right
value = 1
[]
[right_left]
type = FVDirichletBC
variable = right
boundary = right_left
value = 0
[]
[right]
type = FVDirichletBC
variable = right
boundary = right
value = 1
[]
[]
[Materials]
[left]
type = ADGenericFunctorMaterial
prop_names = 'coeff_left'
prop_values = '1'
block = 0
[]
[right]
type = ADGenericFunctorMaterial
prop_names = 'coeff_right'
prop_values = '1'
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
line_search = 'none'
[]
[Outputs]
exodus = true
[]
Input Parameters
- blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
- boundaries_to_forceThe set of boundaries to force execution of this FVFluxKernel on.
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The set of boundaries to force execution of this FVFluxKernel on.
- boundaries_to_not_forceThe set of boundaries to not force execution of this FVFluxKernel on.
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The set of boundaries to not force execution of this FVFluxKernel on.
- force_boundary_executionFalseWhether to force execution of this object on the boundary.
Default:False
C++ Type:bool
Controllable:No
Description:Whether to force execution of this object on the boundary.
- ghost_layers2The number of layers of elements to ghost.
Default:2
C++ Type:unsigned short
Controllable:No
Description:The number of layers of elements to ghost.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_point_neighborsFalseWhether to use point neighbors, which introduces additional ghosting to that used for simple face neighbors.
Default:False
C++ Type:bool
Controllable:No
Description:Whether to use point neighbors, which introduces additional ghosting to that used for simple face neighbors.
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Tagging Parameters
Input Files
- (test/tests/fviks/one-var-diffusion/no-ik.i)
- (test/tests/userobjects/layered_side_integral/layered_side_diffusive_flux_average_fv.i)
- (test/tests/fvkernels/mms/advective-outflow/advection-diffusion.i)
- (test/tests/transfers/multiapp_variable_value_sample_transfer/master_fv.i)
- (test/tests/fvkernels/constraints/integral.i)
- (test/tests/materials/functor_properties/gradients/functor-gradients.i)
- (test/tests/fviks/continuity/test.i)
- (test/tests/variables/caching_fv_variables/fv_caching.i)
- (test/tests/materials/boundary_material/fv_material_quadrature.i)
- (test/tests/fviks/one-var-diffusion/test.i)
- (modules/heat_conduction/test/tests/fvbcs/fv_thermal_resistance/test.i)
- (test/tests/misc/check_error/incomplete_fvkernel_variable_coverage_test.i)
- (test/tests/materials/functor_properties/1d_dirichlet.i)
- (test/tests/fvkernels/single-sided-face/test.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/2d-rc.i)
- (test/tests/postprocessors/side_integral/side_integral_fv_test.i)
- (test/tests/fvkernels/block-restriction/fv-and-fe-block-restriction.i)
- (test/tests/auxkernels/build_array_variable_aux/build_array_variable_aux.i)
- (test/tests/fvkernels/two-var-flux-and-kernel/input.i)
- (test/tests/fvkernels/mms/advection-diffusion.i)
- (modules/navier_stokes/test/tests/finite_volume/cns/mms/1d/hllc-mms.i)
- (test/tests/fvbcs/fv_pp_dirichlet/fv_pp_dirichlet.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/boussinesq/wcnsfv.i)
- (test/tests/fvkernels/constraints/point_value.i)
- (test/tests/fvkernels/mms/cylindrical/diffusion.i)
- (test/tests/fvkernels/mms/mass-mom-mat-advection-diffusion/input.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
- (test/tests/postprocessors/side_diffusive_flux_integral/side_diffusive_flux_integral_fv.i)
- (test/tests/fvkernels/mms/mat-advection-diffusion.i)
- (test/tests/fvkernels/fv_simple_diffusion/unstructured-rz.i)
- (modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_cavity.i)
- (test/tests/markers/error_fraction_marker/error_fraction_marker_fv.i)
- (test/tests/fvkernels/mms/grad-reconstruction/mat-rz.i)
- (modules/heat_conduction/test/tests/fvbcs/fv_thermal_resistance/test_functor.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/exceptions/bad-restriction.i)
- (modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient.i)
- (test/tests/fvkernels/fv_simple_diffusion/dirichlet.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/mms/channel-flow/cylindrical/2d-average-with-temp.i)
- (modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient-action.i)
- (test/tests/fvkernels/mms/non-orthogonal/extended-adr.i)
- (modules/ray_tracing/test/tests/raykernels/line_source_ray_kernel/fv_simple_diffusion_line_source.i)
- (test/tests/fvkernels/fv-to-fe-coupling/1d.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/flux_bcs_velocity.i)
- (test/tests/userobjects/layered_side_integral/layered_side_integral_fv.i)
- (test/tests/fvkernels/fv_adapt/transient-adapt.i)
- (test/tests/fvkernels/block-restriction/1d.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/2d-rc-ambient-convection.i)
- (modules/navier_stokes/test/tests/finite_volume/fvbcs/FVHeatFluxBC/wall_heat_transfer.i)
- (test/tests/fvkernels/fv_simple_diffusion/transient.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/mms/channel-flow/2d-average-with-temp.i)
- (test/tests/fvkernels/fv_simple_diffusion/fv_only_refined.i)
- (test/tests/materials/functor_properties/ad_conversion/1d_dirichlet.i)
- (test/tests/fviks/diffusion/test.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/2d-scalar-transport.i)
- (test/tests/postprocessors/side_diffusive_flux_average/side_diffusive_flux_average_fv.i)
- (test/tests/auxkernels/time_derivative_aux/test_fv.i)
- (test/tests/postprocessors/interface_value/interface_fv_variable_value_postprocessor.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/multiapp-scalar-transport/scalar-transport.i)
- (modules/heat_conduction/test/tests/fvbcs/fv_radiative_heat_flux/test.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-transient.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/dirichlet_bcs_velocity.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-effective.i)
- (test/tests/fvkernels/mms/skewness-correction/adv-diff-react/skewed.i)
- (test/tests/fvkernels/fv_simple_diffusion/3d_dirichlet.i)
- (test/tests/fvkernels/mms/diffusion.i)
- (test/tests/fvkernels/mms/cylindrical/advection-diffusion-reaction.i)
- (test/tests/fvkernels/fv_simple_diffusion/neumann.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-transient-action.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/boussinesq/transient-wcnsfv.i)
- (test/tests/dirackernels/constant_point_source/1d_point_source_fv.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/boussinesq/boussinesq.i)
- (test/tests/postprocessors/element_integral_var_pps/pps_old_value_fv.i)
- (modules/navier_stokes/test/tests/postprocessors/rayleigh/natural_convection.i)
- (test/tests/fvkernels/mms/skewness-correction/diffusion/skewed.i)
- (test/tests/fvkernels/mms/grad-reconstruction/rz.i)
- (test/tests/fvkernels/mms/grad-reconstruction/cartesian.i)
- (test/tests/userobjects/layered_integral/layered_integral_fv_test.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/flux_bcs_direct.i)
- (test/tests/fvkernels/fv_simple_diffusion/1d_dirichlet.i)
- (test/tests/fvkernels/fv_coupled_var/coupled.i)
- (modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_channel.i)
- (test/tests/materials/piecewise_by_block_material/test_functor.i)
- (test/tests/indicators/value_jump_indicator/value_jump_indicator_fv.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/lid-driven/transient-lid-driven-with-energy.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/2d-rc-transient.i)
- (test/tests/materials/piecewise_by_block_material/test.i)
- (test/tests/fvkernels/scaling/auto-scaling.i)
- (test/tests/fvkernels/fv_dotdot/fv_dotdot.i)
- (modules/ray_tracing/test/tests/raykernels/variable_integral_ray_kernel/fv_simple_diffusion_line_integral.i)
- (test/tests/fvkernels/fv_simple_diffusion/fv_only.i)
- (test/tests/postprocessors/side_integral/side_integral_functor.i)
- (test/tests/fvkernels/mms/non-orthogonal/advection-diffusion-reaction.i)
- (test/tests/misc/check_error/incomplete_fvkernel_block_coverage_test.i)
- (test/tests/fvkernels/fv_simple_diffusion/dirichlet_rz.i)
- (modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-action.i)
- (test/tests/indicators/analytical_indicator/analytical_indicator_fv.i)
- (test/tests/postprocessors/element_variable_value/elemental_variable_value_fv.i)
- (test/tests/vectorpostprocessors/point_value_sampler/point_value_sampler_fv.i)
- (test/tests/fvkernels/mms/grad-reconstruction/mat-cartesian.i)
- (test/tests/fvkernels/constraints/bounded_value.i)
- (modules/navier_stokes/test/tests/auxkernels/peclet-number-functor-aux/fv-thermal.i)
- (test/tests/fvkernels/block-restriction/just-mat-blk-restriction.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/dirichlet_bcs_mdot.i)
- (modules/navier_stokes/test/tests/finite_volume/fvbcs/FVFunctorHeatFluxBC/wall_heat_transfer.i)
- (test/tests/fvbcs/fv_neumannbc/fv_neumannbc.i)
- (modules/navier_stokes/test/tests/finite_volume/ins/lid-driven/lid-driven-with-energy.i)
- (test/tests/fvkernels/fv_simple_diffusion/grad-adaptive.i)
- (test/tests/fvkernels/mms/skewness-correction/two_term_extrapol/advection-outflow.i)
- (test/tests/fvkernels/fv_adapt/steady-adapt.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/materials/2d-transient.i)
- (test/tests/materials/functor_properties/vector-magnitude/test.i)
- (test/tests/postprocessors/interface_diffusive_flux/interface_diffusive_flux_fv.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/flux_bcs_mdot.i)
- (modules/navier_stokes/test/tests/finite_volume/wcns/channel-flow/2d-transient.i)
(test/tests/fvkernels/block-restriction/1d.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 20
xmax = 2
[]
[./subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[../]
[./left_right]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'left_right'
[../]
[./right_left]
input = left_right
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'right_left'
[../]
[]
[Variables]
[left]
family = MONOMIAL
order = CONSTANT
fv = true
block = 0
[]
[right]
family = MONOMIAL
order = CONSTANT
fv = true
block = 1
[]
[]
[FVKernels]
[left]
type = FVDiffusion
variable = left
coeff = coeff_left
block = 0
[]
[right]
type = FVDiffusion
variable = right
coeff = coeff_right
block = 1
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = left
boundary = left
value = 0
[]
[left_right]
type = FVDirichletBC
variable = left
boundary = left_right
value = 1
[]
[right_left]
type = FVDirichletBC
variable = right
boundary = right_left
value = 0
[]
[right]
type = FVDirichletBC
variable = right
boundary = right
value = 1
[]
[]
[Materials]
[left]
type = ADGenericFunctorMaterial
prop_names = 'coeff_left'
prop_values = '1'
block = 0
[]
[right]
type = ADGenericFunctorMaterial
prop_names = 'coeff_right'
prop_values = '1'
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
line_search = 'none'
[]
[Outputs]
exodus = true
[]
(test/tests/fviks/one-var-diffusion/no-ik.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmax = 2
[]
[subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 'coeff'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[right]
type = FVDirichletBC
variable = u
boundary = 'right'
value = 0
[]
[]
[Materials]
[block0]
type = ADGenericFunctorMaterial
block = '0'
prop_names = 'coeff'
prop_values = '4'
[]
[block1]
type = ADGenericFunctorMaterial
block = '1'
prop_names = 'coeff'
prop_values = '2'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
csv = true
[]
[Functions]
[exact_u]
type = ParsedFunction
value = 'if(x<1, 1 - x/3, 4/3 - 2*x/3)'
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2Error
variable = u
function = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/userobjects/layered_side_integral/layered_side_diffusive_flux_average_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 6
ny = 6
nz = 6
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[AuxVariables]
[./layered_side_flux_average]
order = CONSTANT
family = MONOMIAL
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[]
[FVBCs]
[./bottom]
type = FVDirichletBC
variable = u
boundary = bottom
value = 0
[../]
[./top]
type = FVDirichletBC
variable = u
boundary = top
value = 1
[../]
[]
[AuxKernels]
[./lsfa]
type = SpatialUserObjectAux
variable = layered_side_flux_average
boundary = top
user_object = layered_side_flux_average
[../]
[]
[Materials]
[./gcm]
type = GenericConstantMaterial
prop_values = 2
prop_names = diffusivity
boundary = 'right top'
[../]
[]
[UserObjects]
[./layered_side_flux_average]
type = LayeredSideDiffusiveFluxAverage
direction = y
diffusivity = diffusivity
num_layers = 1
variable = u
execute_on = linear
boundary = top
[../]
[]
[Executioner]
type = Steady
nl_abs_tol = 1e-14
nl_rel_tol = 1e-14
l_abs_tol = 1e-14
l_tol = 1e-6
[]
[Outputs]
exodus = true
[]
[Debug]
show_material_props = true
[]
(test/tests/fvkernels/mms/advective-outflow/advection-diffusion.i)
diff=1
a=1
[GlobalParams]
advected_interp_method = 'average'
[]
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 1
xmin = -1
xmax = 0
nx = 2
[../]
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
[./advection]
type = FVAdvection
variable = v
velocity = '${a} 0 0'
force_boundary_execution = true
[../]
[./diffusion]
type = FVDiffusion
variable = v
coeff = coeff
[../]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[left]
type = FVFunctionDirichletBC
boundary = 'left'
function = 'exact'
variable = v
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '${diff}'
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'cos(x)'
[]
[forcing]
type = ParsedFunction
value = 'cos(x) - sin(x)'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/transfers/multiapp_variable_value_sample_transfer/master_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
# Yes we want a slightly irregular grid
nx = 11
ny = 11
# We will transfer data to the sub app, and that is currently only
# supported from a replicated mesh
parallel_type = replicated
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[]
[Executioner]
type = Transient
num_steps = 1
dt = 1
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
[MultiApps]
[sub]
app_type = MooseTestApp
positions = '0.5 0.5 0 0.7 0.7 0'
execute_on = timestep_end
type = TransientMultiApp
input_files = sub.i
[]
[pp_sub]
app_type = MooseTestApp
positions = '0.5 0.5 0 0.7 0.7 0'
execute_on = timestep_end
type = TransientMultiApp
input_files = pp_sub.i
[]
[]
[Transfers]
[sample_transfer]
source_variable = u
variable = from_master
type = MultiAppVariableValueSampleTransfer
to_multi_app = sub
[]
[sample_pp_transfer]
source_variable = u
postprocessor = from_master
type = MultiAppVariableValueSamplePostprocessorTransfer
to_multi_app = pp_sub
[]
[]
[Problem]
parallel_barrier_messaging = false
[]
(test/tests/fvkernels/constraints/integral.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 4
[]
[Variables]
[v]
type = MooseVariableFVReal
[]
[lambda]
type = MooseVariableScalar
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[average]
type = FVIntegralValueConstraint
variable = v
phi0 = 13
lambda = lambda
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[]
[Outputs]
exodus = true
[]
(test/tests/materials/functor_properties/gradients/functor-gradients.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
ny = 4
xmax = 2
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[sink]
type = MooseVariableFVReal
[]
[diffusive_flux_x]
type = MooseVariableFVReal
[]
[diffusive_flux_y]
type = MooseVariableFVReal
[]
[diffusive_flux_magnitude]
type = MooseVariableFVReal
[]
[]
[ICs]
[sink]
type = FunctionIC
variable = sink
function = 'x^3'
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1.1
[]
[sink]
type = FVFunctorElementalKernel
variable = u
functor_name = 'sink_mat'
[]
[]
[FVBCs]
[bounds]
type = FVDirichletBC
variable = u
boundary = 'left right top bottom'
value = 0
[]
[]
[Materials]
[functor_properties]
type = ADGenericFunctorMaterial
prop_names = 'sink_mat diffusive_coef'
prop_values = 'sink 4.5'
[]
[gradient_of_u]
type = ADGenericFunctorGradientMaterial
prop_names = 'grad_u'
prop_values = 'u'
[]
[]
# Compute the diffusive flux magnitude
[AuxKernels]
[diffusive_flux_x]
type = ADFunctorVectorElementalAux
variable = 'diffusive_flux_x'
functor = 'grad_u'
factor = 'diffusive_coef'
component = 0
[]
[diffusive_flux_y]
type = ADFunctorVectorElementalAux
variable = 'diffusive_flux_y'
functor = 'grad_u'
factor = 'diffusive_coef'
component = 1
[]
[diffusive_flux_magnitude]
type = VectorMagnitudeAux
variable = 'diffusive_flux_magnitude'
x = 'diffusive_flux_x'
y = 'diffusive_flux_y'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
[]
(test/tests/fviks/continuity/test.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 20
xmax = 2
[]
[subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[]
[interface_primary_side]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'primary_interface'
[]
[]
[GlobalParams]
# retain behavior at time of test creation
two_term_boundary_expansion = false
[]
[Variables]
[u]
type = MooseVariableFVReal
block = 0
initial_condition = 0.5
[]
[v]
type = MooseVariableFVReal
block = 1
initial_condition = 0.5
[]
[lambda]
type = MooseVariableScalar
[]
[]
[Problem]
kernel_coverage_check = false
[]
[FVKernels]
[diff_left]
type = FVDiffusion
variable = u
coeff = 'left'
block = 0
[]
[diff_right]
type = FVDiffusion
variable = v
coeff = 'right'
block = 1
[]
[]
[FVInterfaceKernels]
[interface]
type = FVTwoVarContinuityConstraint
variable1 = u
variable2 = v
boundary = 'primary_interface'
subdomain1 = '0'
subdomain2 = '1'
lambda = 'lambda'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[v_left]
type = FVDirichletBC
variable = v
boundary = 'right'
value = 0
[]
[]
[Materials]
[block0]
type = ADGenericFunctorMaterial
block = '0'
prop_names = 'left'
prop_values = '1'
[]
[block1]
type = ADGenericFunctorMaterial
block = '1'
prop_names = 'right'
prop_values = '1'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm lu NONZERO'
[]
[Outputs]
exodus = true
[]
(test/tests/variables/caching_fv_variables/fv_caching.i)
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1.5 2.4 0.1'
dy = '1.3 0.9'
ix = '2 1 1'
iy = '2 3'
subdomain_id = '0 1 1 2 2 2'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[adv]
type = FVMatAdvection
variable = u
vel = v_mat
[]
[body_force]
type = FVBodyForce
variable = u
value = 10
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[right]
type = FVDirichletBC
variable = u
boundary = 'right'
value = 1
[]
[top]
type = FVNeumannBC
variable = u
value = 1
boundary = 'top'
[]
[]
[Materials]
[v_mat]
type = ADGenericVectorFunctorMaterial
prop_names = 'v_mat'
prop_values = '4 0 0'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
exodus = true
[]
(test/tests/materials/boundary_material/fv_material_quadrature.i)
# Parsed material properties depend on the physical location of the element
# This requires the initialization of the quadrature in the FVFlux loop
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 4
ny = 4
elem_type = QUAD9
[]
[Functions]
[linear_x]
type = ADParsedFunction
value = 'x'
[]
[piecewise_linear_x]
type = ADPiecewiseLinear
x = '-1 2'
y = '-1 2'
axis = 'x'
[]
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = k1
[]
[r]
type = FVReaction
variable = u
[]
[]
[FVBCs]
[all]
type = FVDirichletBC
variable = u
boundary = 'left right bottom top'
value = 1
[]
[]
[Materials]
active = 'k1'
[k1]
type = ADGenericFunctorMaterial
prop_names = 'k1'
prop_values = linear_x
block = 0
[]
[k1_piecewise]
type = ADGenericFunctorMaterial
prop_names = 'k1'
prop_values = piecewise_linear_x
block = 0
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
(test/tests/fviks/one-var-diffusion/test.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmax = 2
[]
[subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[]
[interface_primary_side]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'primary_interface'
[]
[interface_secondary_side]
input = interface_primary_side
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'secondary_interface'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[v]
type = MooseVariableFVReal
block = 0
[]
[w]
type = MooseVariableFVReal
block = 1
[]
[]
[FVKernels]
[diff_left]
type = FVDiffusion
variable = u
coeff = 'left'
block = 0
[]
[diff_right]
type = FVDiffusion
variable = u
coeff = 'right'
block = 1
[]
[diff_v]
type = FVDiffusion
variable = v
block = 0
coeff = 'left'
[]
[diff_w]
type = FVDiffusion
variable = w
block = 1
coeff = 'right'
[]
[]
[FVInterfaceKernels]
active = 'interface'
[interface]
type = FVOneVarDiffusionInterface
variable1 = u
boundary = primary_interface
subdomain1 = '0'
subdomain2 = '1'
coeff1 = 'left'
coeff2 = 'right'
[]
[bad1]
type = FVOneVarDiffusionInterface
variable1 = w
variable2 = u
boundary = primary_interface
subdomain1 = '0'
subdomain2 = '1'
coeff1 = 'left'
coeff2 = 'right'
[]
[bad2]
type = FVOneVarDiffusionInterface
variable1 = u
variable2 = v
boundary = primary_interface
subdomain1 = '0'
subdomain2 = '1'
coeff1 = 'left'
coeff2 = 'right'
[]
[bad3]
type = FVOneVarDiffusionInterface
variable1 = v
boundary = primary_interface
subdomain1 = '0'
subdomain2 = '1'
coeff1 = 'left'
coeff2 = 'right'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[right]
type = FVDirichletBC
variable = u
boundary = 'right'
value = 0
[]
[v_left]
type = FVDirichletBC
variable = v
boundary = 'left'
value = 1
[]
[v_right]
type = FVDirichletBC
variable = v
boundary = 'primary_interface'
value = 0
[]
[w_left]
type = FVDirichletBC
variable = w
boundary = 'secondary_interface'
value = 1
[]
[w_right]
type = FVDirichletBC
variable = w
boundary = 'right'
value = 0
[]
[]
[Materials]
[block0]
type = ADGenericFunctorMaterial
block = '0'
prop_names = 'left'
prop_values = '4'
[]
[block1]
type = ADGenericFunctorMaterial
block = '1'
prop_names = 'right'
prop_values = '2'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
csv = true
[]
[Functions]
[exact_u]
type = ParsedFunction
value = 'if(x<1, 1 - x/3, 4/3 - 2*x/3)'
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2u]
type = ElementL2Error
variable = u
function = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/heat_conduction/test/tests/fvbcs/fv_thermal_resistance/test.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 5
ny = 5
xmax = 2
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[FVKernels]
[diff_left]
type = FVDiffusion
variable = u
coeff = 4
[]
[gradient_creating]
type = FVBodyForce
variable = u
[]
[]
[FVBCs]
[left]
type = FVThermalResistanceBC
geometry = 'cartesian'
variable = u
T_ambient = 10
htc = 'htc'
emissivity = 0.2
thermal_conductivities = '0.1 0.2 0.3'
conduction_thicknesses = '1 0.7 0.2'
boundary = 'left'
# Test setting iteration parameters
step_size = 0.02
max_iterations = 120
tolerance = 1e-4
[]
[top]
type = FVThermalResistanceBC
geometry = 'cartesian'
variable = u
# Test setting the temperature separately from the variable
temperature = 'u'
T_ambient = 14
htc = 'htc'
emissivity = 0
thermal_conductivities = '0.1 0.2 0.3'
conduction_thicknesses = '1 0.7 0.4'
boundary = 'top'
[]
[other]
type = FVDirichletBC
variable = u
boundary = 'right bottom'
value = 0
[]
[]
[Materials]
[cht]
type = ADGenericConstantMaterial
prop_names = 'htc'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
[]
(test/tests/misc/check_error/incomplete_fvkernel_variable_coverage_test.i)
[Mesh]
[./square]
type = GeneratedMeshGenerator
nx = 2
ny = 2
dim = 2
[../]
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[./v]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[FVKernels]
active = 'diff body_force'
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[./body_force]
type = FVBodyForce
variable = u
value = 10
[../]
[]
[FVBCs]
active = 'right'
[./left]
type = FVDirichletBC
variable = u
boundary = 3
value = 1
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
file_base = out
exodus = true
[]
(test/tests/materials/functor_properties/1d_dirichlet.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmax = 2
[]
[Variables]
[v]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[sink]
type = MooseVariableFVReal
[]
[]
[ICs]
[sink]
type = FunctionIC
variable = sink
function = 'x^3'
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = 1
[]
[sink]
type = FVFunctorElementalKernel
variable = v
functor_name = 'sink_mat'
[]
[]
[FVBCs]
[bounds]
type = FVDirichletBC
variable = v
boundary = 'left right'
value = 0
[]
[]
[Materials]
active = 'functor'
[functor]
type = ADGenericFunctorMaterial
prop_names = sink_mat
prop_values = sink
[]
[overlapping_functor]
type = ADGenericFunctorMaterial
prop_names = 'sink_mat'
prop_values = v
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/single-sided-face/test.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2
[]
[Variables]
[v]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[aux]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[aux]
type = ADFunctorElementalAux
variable = aux
functor = 'first_value'
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[first]
type = FVGradAndDotFunctorFluxKernel
variable = v
value_functor = "first_value"
grad_functor = "first_grad"
dot_functor = "first_dot"
[]
[second]
type = FVGradAndDotFunctorFluxKernel
variable = v
value_functor = "second_value"
grad_functor = "second_grad"
dot_functor = "second_dot"
[]
[third]
type = FVGradAndDotFunctorFluxKernel
variable = v
value_functor = "third_value"
grad_functor = "third_grad"
dot_functor = "third_dot"
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Functions]
[func]
type = ADParsedFunction
value = 'x + t'
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[first]
type = FunctorPropFromGradAndDot
functor = 'func'
root_functor_prop_name = 'first'
[]
[second]
type = FunctorPropFromGradAndDot
functor = 'aux'
root_functor_prop_name = 'second'
[]
[third]
type = FunctorPropFromGradAndDot
functor = 'v'
root_functor_prop_name = 'third'
[]
[]
[Executioner]
type = Transient
num_steps = 2
dt = 0.5
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/block_restriction/2d-rc.i)
mu=1.1
rho=1.1
advected_interp_method='average'
velocity_interp_method='rc'
restricted_blocks = '1'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = ${restricted_blocks}
pressure = pressure
[]
[]
[Mesh]
parallel_type = 'replicated'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '7 7'
iy = 10
subdomain_id = '1 2'
[]
[mid]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
input = mesh
new_boundary = 'middle'
[]
[break_top]
type = PatchSidesetGenerator
boundary = 'top'
n_patches = 2
input = mid
[]
[break_bottom]
type = PatchSidesetGenerator
boundary = 'bottom'
n_patches = 2
input = break_top
[]
[]
[Problem]
kernel_coverage_check = false
fv_bcs_integrity_check = true
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[pressure]
type = INSFVPressureVariable
block = ${restricted_blocks}
[]
[temperature]
type = INSFVEnergyVariable
block = ${restricted_blocks}
[]
[scalar]
type = INSFVScalarFieldVariable
block = ${restricted_blocks}
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = temperature
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
coeff = 1.1
variable = temperature
[]
[energy_loss]
type = FVBodyForce
variable = temperature
value = -0.1
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
coeff = 1
variable = scalar
[]
[scalar_src]
type = FVBodyForce
variable = scalar
value = 0.1
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[top-wall-u]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = u
function = 0
[]
[top-wall-v]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = v
function = 0
[]
[bottom-wall-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = u
mu = ${mu}
u = u
v = v
momentum_component = 'x'
[]
[bottom-wall-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = v
mu = ${mu}
u = u
v = v
momentum_component = 'y'
[]
[bottom-wall-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom_0'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'middle'
variable = pressure
function = 0
[]
[inlet_t]
type = FVDirichletBC
boundary = 'left'
variable = temperature
value = 1
[]
[outlet_scalar]
type = FVDirichletBC
boundary = 'middle'
variable = scalar
value = 1
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
block = ${restricted_blocks}
[]
[const]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '2'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
(test/tests/postprocessors/side_integral/side_integral_fv_test.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
xmin = 0
xmax = 4
ymin = 0
ymax = 1
[]
[Variables]
active = 'u'
[./u]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
active = 'diff'
[./diff]
type = FVDiffusion
variable = u
coeff = '1'
[../]
[]
[FVBCs]
active = 'left right'
[./left]
type = FVDirichletBC
variable = u
boundary = 3
value = 0
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = 1
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Postprocessors]
[./integral]
type = SideIntegralVariablePostprocessor
boundary = 0
variable = u
[../]
[]
[Outputs]
file_base = fv_out
exodus = true
[]
(test/tests/fvkernels/block-restriction/fv-and-fe-block-restriction.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 80
xmax = 4
[]
[./subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '2.0 0 0'
block_id = 1
top_right = '4.0 1.0 0'
[../]
[./left_right]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'left_right'
[../]
[./right_left]
input = left_right
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'right_left'
[../]
[]
[Variables]
[left_fv]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
block = 0
[]
[left_fe]
initial_condition = 1
block = 0
[]
[right_fv]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
block = 1
[]
[right_fe]
initial_condition = 1
block = 1
[]
[]
[FVKernels]
active = 'bad_left_diff left_coupled bad_right_diff right_coupled'
[bad_left_diff]
type = FVDiffusion
variable = left_fv
coeff = fv_prop
block = 0
[]
[good_left_diff]
type = FVDiffusion
variable = left_fv
coeff = left_fv_prop
block = 0
[]
[left_coupled]
type = FVCoupledForce
v = left_fv
variable = left_fv
block = 0
[]
[bad_right_diff]
type = FVDiffusion
variable = right_fv
coeff = fv_prop
block = 1
[]
[good_right_diff]
type = FVDiffusion
variable = right_fv
coeff = right_fv_prop
block = 1
[]
[right_coupled]
type = FVCoupledForce
v = right_fv
variable = right_fv
block = 1
[]
[]
[Kernels]
[left_diff]
type = ADFunctorMatDiffusion
variable = left_fe
diffusivity = fe_prop
[]
[left_coupled]
type = CoupledForce
v = left_fv
variable = left_fe
[]
[right_diff]
type = ADFunctorMatDiffusion
variable = right_fe
diffusivity = fe_prop
[]
[right_coupled]
type = CoupledForce
v = right_fv
variable = right_fe
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = left_fv
boundary = left
value = 0
[]
[left_right]
type = FVDirichletBC
variable = left_fv
boundary = left_right
value = 1
[]
[right_left]
type = FVDirichletBC
variable = right_fv
boundary = right_left
value = 0
[]
[right]
type = FVDirichletBC
variable = right_fv
boundary = right
value = 1
[]
[]
[BCs]
[left]
type = DirichletBC
variable = left_fe
boundary = left
value = 0
[]
[left_right]
type = DirichletBC
variable = left_fe
boundary = left_right
value = 1
[]
[right_left]
type = DirichletBC
variable = right_fe
boundary = right_left
value = 0
[]
[right]
type = DirichletBC
variable = right_fe
boundary = right
value = 1
[]
[]
[Materials]
active = 'fe_mat_left bad_fv_mat_left fe_mat_right bad_fv_mat_right'
[fe_mat_left]
type = FEFVCouplingMaterial
fe_var = left_fe
block = 0
[]
[bad_fv_mat_left]
type = FEFVCouplingMaterial
fv_var = left_fv
block = 0
[]
[good_fv_mat_left]
type = FEFVCouplingMaterial
fv_var = left_fv
fv_prop_name = 'left_fv_prop'
block = 0
[]
[fe_mat_right]
type = FEFVCouplingMaterial
fe_var = right_fe
block = 1
[]
[bad_fv_mat_right]
type = FEFVCouplingMaterial
fv_var = right_fv
block = 1
[]
[good_fv_mat_right]
type = FEFVCouplingMaterial
fv_var = right_fv
fv_prop_name = 'right_fv_prop'
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
line_search = 'none'
[]
[Outputs]
exodus = true
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
(test/tests/auxkernels/build_array_variable_aux/build_array_variable_aux.i)
[Mesh]
[meshgen]
type = GeneratedMeshGenerator
nx = 2
ny = 2
dim = 2
[]
[]
[Variables]
[a]
order = FIRST
family = LAGRANGE
[]
[b]
order = FIRST
family = LAGRANGE
[]
[c]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[d]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[Kernels]
[diff_a]
type = Diffusion
variable = a
[]
[diff_b]
type = Diffusion
variable = b
[]
[]
[FVKernels]
[diff_c]
type = FVDiffusion
variable = c
coeff = 1
[]
[diff_d]
type = FVDiffusion
variable = d
coeff = 1
[]
[]
[BCs]
[a1]
type = DirichletBC
variable = a
boundary = left
value = 0
[]
[a2]
type = DirichletBC
variable = a
boundary = right
value = 1
[]
[b1]
type = DirichletBC
variable = b
boundary = bottom
value = 0
[]
[b2]
type = DirichletBC
variable = b
boundary = top
value = 1
[]
[]
[FVBCs]
[c1]
type = FVDirichletBC
variable = c
boundary = left
value = 0
[]
[c2]
type = FVDirichletBC
variable = c
boundary = right
value = 1
[]
[d1]
type = FVDirichletBC
variable = d
boundary = bottom
value = 0
[]
[d2]
type = FVDirichletBC
variable = d
boundary = top
value = 1
[]
[]
[Problem]
kernel_coverage_check = off
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[AuxVariables]
[ab]
order = FIRST
family = LAGRANGE
components = 2
[]
[cd]
order = CONSTANT
family = MONOMIAL
components = 2
[]
[]
[AuxKernels]
[build_ab]
type = BuildArrayVariableAux
variable = ab
component_variables = 'a b'
[]
[build_cd]
type = BuildArrayVariableAux
variable = cd
component_variables = 'c d'
[]
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/two-var-flux-and-kernel/input.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff_u]
type = FVDiffusion
variable = u
coeff = coeff
[]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left_u]
type = FVNeumannBC
variable = u
boundary = left
value = 0
[]
[right_u]
type = FVDirichletBC
variable = u
boundary = right
value = 42
[]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/mms/advection-diffusion.i)
diff=1.1
a=1.1
[GlobalParams]
advected_interp_method = 'average'
[]
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 1
xmin = -0.6
xmax = 0.6
nx = 64
[../]
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
[./advection]
type = FVAdvection
variable = v
velocity = '${a} 0 0'
[../]
[./diffusion]
type = FVDiffusion
variable = v
coeff = coeff
[../]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[boundary]
type = FVFunctionDirichletBC
boundary = 'left right'
function = 'exact'
variable = v
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '${diff}'
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = '3*x^2 + 2*x + 1'
[]
[forcing]
type = ParsedFunction
value = '-${diff}*6 + ${a} * (6*x + 2)'
# value = '-${diff}*6'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/cns/mms/1d/hllc-mms.i)
[GlobalParams]
fp = fp
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
xmin = .1
xmax = 1
nx = 2
[]
[]
[Variables]
[rho]
type = MooseVariableFVReal
[]
[rho_u]
type = MooseVariableFVReal
[]
[rho_et]
type = MooseVariableFVReal
[]
[]
[ICs]
[rho]
type = FunctionIC
variable = rho
function = 'cos(1.1*x)'
[]
[rho_u]
type = FunctionIC
variable = rho_u
function = '2*sin(1.1*x)'
[]
[rho_et]
type = FunctionIC
variable = rho_et
function = '3*cos(1.1*x)'
[]
[]
[FVKernels]
[mass_advection]
type = CNSFVMassHLLC
variable = rho
[]
[fake_diffusivity]
type = FVDiffusion
variable = rho
coeff = 1
[]
[mass_fn]
type = FVBodyForce
variable = rho
function = 'forcing_rho'
[]
[momentum_advection]
type = CNSFVMomentumHLLC
variable = rho_u
momentum_component = x
[]
[viscosity]
type = FVDiffusion
variable = rho_u
coeff = 1
[]
[momentum_fn]
type = FVBodyForce
variable = rho_u
function = 'forcing_rho_u'
[]
[fluid_energy_advection]
type = CNSFVFluidEnergyHLLC
variable = rho_et
[]
[fake_conduction]
type = FVDiffusion
variable = rho_et
coeff = 1
[]
[energy_fn]
type = FVBodyForce
variable = rho_et
function = 'forcing_rho_et'
[]
[]
[FVBCs]
[rho]
type = FVFunctionDirichletBC
boundary = 'left right'
variable = rho
function = 'exact_rho'
[]
[rho_u]
type = FVFunctionDirichletBC
boundary = 'left right'
variable = rho_u
function = 'exact_rho_u'
[]
[rho_et]
type = FVFunctionDirichletBC
boundary = 'left right'
variable = rho_et
function = 'exact_rho_et'
[]
[]
[Materials]
[var_mat]
type = ConservedVarValuesMaterial
rho = rho
rhou = rho_u
rho_et = rho_et
[]
[]
[Modules]
[FluidProperties]
[fp]
type = TestConservedVarFluidProperties
[]
[]
[]
[Functions]
[exact_rho]
type = ParsedFunction
value = 'cos(x)'
[]
[forcing_rho]
type = ParsedFunction
value = '3*cos(x)'
[]
[exact_rho_u]
type = ParsedFunction
value = '2*sin(x)'
[]
[forcing_rho_u]
type = ParsedFunction
value = '4*sin(x)^3/cos(x)^2 + 9*sin(x)'
[]
[exact_rho_et]
type = ParsedFunction
value = '3*cos(x)'
[]
[forcing_rho_et]
type = ParsedFunction
value = '11*cos(x)'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2rho]
type = ElementL2Error
variable = rho
function = exact_rho
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2rho_u]
variable = rho_u
function = exact_rho_u
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[L2rho_et]
variable = rho_et
function = exact_rho_et
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvbcs/fv_pp_dirichlet/fv_pp_dirichlet.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[]
[FVBCs]
[left]
type = FVPostprocessorDirichletBC
variable = u
boundary = left
postprocessor = bc_val
[]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 0
[]
[]
[Postprocessors]
[bc_val]
type = Receiver
default = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'Newton'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/boussinesq/wcnsfv.i)
mu = 1
rho = 'rho'
k = 1
cp = 1
alpha = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# rayleigh=1e3
cold_temp=300
hot_temp=310
[GlobalParams]
two_term_boundary_expansion = true
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 10
nx = 64
ny = 64
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = 1e5
[]
[T]
type = INSFVEnergyVariable
scaling = 1e-4
initial_condition = ${cold_temp}
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[AuxVariables]
[U]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[vel_x]
order = FIRST
family = MONOMIAL
[]
[vel_y]
order = FIRST
family = MONOMIAL
[]
[viz_T]
order = FIRST
family = MONOMIAL
[]
[rho_out]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[mag]
type = VectorMagnitudeAux
variable = U
x = u
y = v
execute_on = 'initial timestep_end'
[]
[vel_x]
type = ParsedAux
variable = vel_x
function = 'u'
execute_on = 'initial timestep_end'
args = 'u'
[]
[vel_y]
type = ParsedAux
variable = vel_y
function = 'v'
execute_on = 'initial timestep_end'
args = 'v'
[]
[viz_T]
type = ParsedAux
variable = viz_T
function = 'T'
execute_on = 'initial timestep_end'
args = 'T'
[]
[rho_out]
type = ADFunctorElementalAux
functor = 'rho'
variable = 'rho_out'
execute_on = 'initial timestep_end'
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
phi0 = 1e5
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[u_gravity]
type = INSFVMomentumGravity
variable = u
gravity = '0 -1 0'
rho = ${rho}
momentum_component = 'x'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[v_gravity]
type = INSFVMomentumGravity
variable = v
gravity = '0 -1 0'
rho = ${rho}
momentum_component = 'y'
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[]
[FVBCs]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left right top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = left
value = ${hot_temp}
[]
[T_cold]
type = FVDirichletBC
variable = T
boundary = right
value = ${cold_temp}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = IdealGasFluidProperties
[]
[]
[]
[Materials]
[const]
type = ADGenericConstantMaterial
prop_names = 'alpha'
prop_values = '${alpha}'
[]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/constraints/point_value.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 4
[]
[Variables]
[v]
type = MooseVariableFVReal
[]
[lambda]
type = MooseVariableScalar
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[average]
type = FVPointValueConstraint
variable = v
phi0 = 13
lambda = lambda
point = '0.3 0 0'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/mms/cylindrical/diffusion.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[Problem]
coord_type = 'RZ'
[]
[FVKernels]
[diff_v]
type = FVDiffusion
variable = v
coeff = coeff
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[boundary]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = '1.1*sin(0.9*x)*cos(1.2*y)'
[]
[forcing]
type = ParsedFunction
value = '1.584*sin(0.9*x)*cos(1.2*y) - (-0.891*x*sin(0.9*x)*cos(1.2*y) + 0.99*cos(0.9*x)*cos(1.2*y))/x'
[]
[]
[Executioner]
type = Steady
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/mms/mass-mom-mat-advection-diffusion/input.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 2
xmin = -.6
xmax = .6
[]
[]
[GlobalParams]
advected_interp_method = 'average'
[]
[Variables]
[fv_rho]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = 2
[]
[fv_vel]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = 2
[]
[]
[FVKernels]
[adv_rho]
type = FVMatAdvection
variable = fv_rho
vel = 'fv_velocity'
[]
[diff_rho]
type = FVDiffusion
variable = fv_rho
coeff = coeff
[]
[forcing_rho]
type = FVBodyForce
variable = fv_rho
function = 'forcing_rho'
[]
[adv_rho_u]
type = FVMatAdvection
variable = fv_vel
vel = 'fv_velocity'
advected_quantity = 'rho_u'
[]
[diff_vel]
type = FVDiffusion
variable = fv_vel
coeff = coeff
[]
[forcing_vel]
type = FVBodyForce
variable = fv_vel
function = 'forcing_vel'
[]
[]
[FVBCs]
[boundary_rho]
type = FVFunctionDirichletBC
boundary = 'left right'
function = 'exact_rho'
variable = fv_rho
[]
[boundary_vel]
type = FVFunctionDirichletBC
boundary = 'left right'
function = 'exact_vel'
variable = fv_vel
[]
[]
[Materials]
[euler_material]
type = ADCoupledVelocityMaterial
vel_x = fv_vel
rho = fv_rho
velocity = 'fv_velocity'
[]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
line_search = 'none'
[]
[Outputs]
csv = true
exodus = true
[]
[Functions]
[forcing_rho]
type = ParsedFunction
value = '-1.331*sin(1.1*x)^2 + 1.331*sin(1.1*x) + 1.331*cos(1.1*x)^2'
[]
[exact_rho]
type = ParsedFunction
value = '1.1*sin(1.1*x)'
[]
[forcing_vel]
type = ParsedFunction
value = '-2.9282*sin(1.1*x)^2*cos(1.1*x) + 1.4641*cos(1.1*x)^3 + 1.331*cos(1.1*x)'
[]
[exact_vel]
type = ParsedFunction
value = '1.1*cos(1.1*x)'
[]
[]
[Postprocessors]
[./l2_rho]
type = ElementL2Error
variable = fv_rho
function = exact_rho
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./l2_vel]
type = ElementL2Error
variable = fv_vel
function = exact_vel
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated.i)
mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '5 5'
dy = '1.0'
ix = '50 50'
iy = '20'
subdomain_id = '1 2'
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'T_solid'
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
[]
[]
[AuxVariables]
[T_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'solid_energy_diffusion solid_energy_convection'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
k = ${k}
variable = T_fluid
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[solid_energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_solid
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
inactive = 'heated-side'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = ${fparse u_inlet * rho * cp * T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = 150
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[Materials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '1'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-14
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/postprocessors/side_diffusive_flux_integral/side_diffusive_flux_integral_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[]
[FVBCs]
[./left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Materials]
[./mat_props]
type = GenericConstantMaterial
block = 0
prop_names = diffusivity
prop_values = 2
[../]
[./mat_props_bnd]
type = GenericConstantMaterial
boundary = right
prop_names = diffusivity
prop_values = 1
[../]
[./mat_props_vector]
type = GenericConstantVectorMaterial
boundary = 'right top'
prop_names = diffusivity_vec
prop_values = '1 1.5 1'
[../]
[]
[Postprocessors]
inactive = 'avg_flux_top'
[./avg_flux_right]
# Computes flux integral on the boundary, which should be -1
type = SideDiffusiveFluxAverage
variable = u
boundary = right
diffusivity = diffusivity
[../]
[./avg_flux_top]
type = SideVectorDiffusivityFluxIntegral
variable = u
boundary = top
diffusivity = diffusivity_vec
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
nl_abs_tol = 1e-14
nl_rel_tol = 1e-14
l_abs_tol = 1e-14
l_tol = 1e-6
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/mms/mat-advection-diffusion.i)
diff=1.1
a=1.1
[GlobalParams]
advected_interp_method = 'average'
[]
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 1
xmin = -0.6
xmax = 0.6
nx = 64
[../]
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
[./advection]
type = FVMatAdvection
variable = v
vel = 'fv_velocity'
[../]
[./diffusion]
type = FVDiffusion
variable = v
coeff = coeff
[../]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[boundary]
type = FVFunctionDirichletBC
boundary = 'left right'
function = 'exact'
variable = v
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '${diff}'
[]
[adv_material]
type = ADCoupledVelocityMaterial
vel_x = '${a}'
rho = 'v'
velocity = 'fv_velocity'
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = '3*x^2 + 2*x + 1'
[]
[forcing]
type = ParsedFunction
value = '-${diff}*6 + ${a} * (6*x + 2)'
# value = '-${diff}*6'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/fv_simple_diffusion/unstructured-rz.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
elem_type = TRI3
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[FVBCs]
[right]
type = FVDirichletBC
boundary = right
value = 1
variable = v
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_cavity.i)
mu = 1
rho = 1
k = .01
cp = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 0.5'
dy = '1'
ix = '8 5'
iy = '8'
subdomain_id = '0 1'
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'cmg'
primary_block = 0
paired_block = 1
new_boundary = 'interface'
[]
[secondary_interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'interface'
primary_block = 1
paired_block = 0
new_boundary = 'secondary_interface'
[]
[]
[GlobalParams]
# retain behavior at time of test creation
two_term_boundary_expansion = false
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = 0
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
block = 0
[]
[v]
type = INSFVVelocityVariable
block = 0
[]
[pressure]
type = INSFVPressureVariable
block = 0
[]
[T]
type = INSFVEnergyVariable
block = 0
[]
[Ts]
type = INSFVEnergyVariable
block = 1
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[ICs]
[T]
type = ConstantIC
variable = T
value = 1
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
block = 0
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
block = 0
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
block = 0
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
block = 0
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
block = 0
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
block = 0
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
block = 0
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
block = 0
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
block = 0
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
block = 0
[]
[solid_temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = Ts
block = 1
[]
[]
[FVInterfaceKernels]
[convection]
type = FVConvectionCorrelationInterface
variable1 = T
variable2 = Ts
boundary = 'interface'
h = 5
temp_solid = Ts
temp_fluid = T
subdomain1 = 0
subdomain2 = 1
bulk_distance = 0.3
[]
[]
[FVBCs]
[top_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top'
function = 'lid_function'
[]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left interface bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left interface top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = 'bottom'
value = 1
[]
[T_cold]
type = FVDirichletBC
variable = Ts
boundary = 'right'
value = 0
[]
[]
[Materials]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
block = 0
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
l_max_its = 200
[]
[Outputs]
exodus = true
[]
(test/tests/markers/error_fraction_marker/error_fraction_marker_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[u]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[Functions]
[solution]
type = ParsedFunction
value = (exp(x)-1)/(exp(1)-1)
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = coeff
[]
[conv]
type = FVAdvection
variable = u
velocity = '1 0 0'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Adaptivity]
[Indicators]
[error]
type = AnalyticalIndicator
variable = u
function = solution
[]
[]
[Markers]
[marker]
type = ErrorFractionMarker
coarsen = 0.1
indicator = error
refine = 0.3
[]
[]
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/mms/grad-reconstruction/mat-rz.i)
a=1.1
diff=1.1
[Mesh]
[gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 2
xmax = 3
ymin = 0
ymax = 1
nx = 2
ny = 2
[]
[]
[Problem]
coord_type = 'RZ'
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[]
[]
[FVKernels]
[advection]
type = FVElementalAdvection
variable = v
velocity = '${a} ${a} 0'
advected_quantity = 'mat_u'
grad_advected_quantity = 'mat_grad_u'
[]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[diri]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Materials]
[mat]
type = ADCoupledGradientMaterial
mat_prop = 'mat_u'
grad_mat_prop = 'mat_grad_u'
u = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-a*sin(x)*sin(y) + diff*sin(x)*cos(y) + sin(x)*cos(y) + (x*a*cos(x)*cos(y) + a*sin(x)*cos(y))/x - (-x*diff*sin(x)*cos(y) + diff*cos(x)*cos(y))/x'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_shift_type -sub_pc_type'
petsc_options_value = 'asm NONZERO lu'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/heat_conduction/test/tests/fvbcs/fv_thermal_resistance/test_functor.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 5
ny = 5
xmax = 2
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[FVKernels]
[diff_left]
type = FVDiffusion
variable = u
coeff = 4
[]
[gradient_creating]
type = FVBodyForce
variable = u
[]
[]
[FVBCs]
[left]
type = FunctorThermalResistanceBC
geometry = 'cartesian'
variable = u
T_ambient = 10
htc = 'htc'
emissivity = 0.2
thermal_conductivities = '0.1 0.2 0.3'
conduction_thicknesses = '1 0.7 0.2'
boundary = 'left'
# Test setting iteration parameters
step_size = 0.02
max_iterations = 120
tolerance = 1e-4
[]
[top]
type = FunctorThermalResistanceBC
geometry = 'cartesian'
variable = u
# Test setting the temperature separately from the variable
temperature = 'u'
T_ambient = 14
htc = 'htc'
emissivity = 0
thermal_conductivities = '0.1 0.2 0.3'
conduction_thicknesses = '1 0.7 0.4'
boundary = 'top'
[]
[other]
type = FVDirichletBC
variable = u
boundary = 'right bottom'
value = 0
[]
[]
[Materials]
[cht]
type = ADGenericFunctorMaterial
prop_names = 'htc'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/exceptions/bad-restriction.i)
mu=1.1
rho=1.1
advected_interp_method='average'
velocity_interp_method='rc'
restricted_blocks = '1'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = '1 2'
pressure = pressure
[]
[]
[Mesh]
parallel_type = 'replicated'
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '7 7'
iy = 10
subdomain_id = '1 2'
[]
[mid]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 1
paired_block = 2
input = mesh
new_boundary = 'middle'
[]
[break_top]
type = PatchSidesetGenerator
boundary = 'top'
n_patches = 2
input = mid
[]
[break_bottom]
type = PatchSidesetGenerator
boundary = 'bottom'
n_patches = 2
input = break_top
[]
[]
[Problem]
kernel_coverage_check = false
fv_bcs_integrity_check = true
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
block = ${restricted_blocks}
[]
[pressure]
type = INSFVPressureVariable
block = ${restricted_blocks}
[]
[temperature]
type = INSFVEnergyVariable
block = ${restricted_blocks}
[]
[scalar]
type = INSFVScalarFieldVariable
block = ${restricted_blocks}
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = temperature
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
coeff = 1.1
variable = temperature
[]
[energy_loss]
type = FVBodyForce
variable = temperature
value = -0.1
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
coeff = 1
variable = scalar
[]
[scalar_src]
type = FVBodyForce
variable = scalar
value = 0.1
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[top-wall-u]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = u
function = 0
[]
[top-wall-v]
type = INSFVNoSlipWallBC
boundary = 'top_0'
variable = v
function = 0
[]
[bottom-wall-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = u
mu = ${mu}
u = u
v = v
momentum_component = 'x'
[]
[bottom-wall-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom_0'
variable = v
mu = ${mu}
u = u
v = v
momentum_component = 'y'
[]
[bottom-wall-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom_0'
variable = pressure
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'middle'
variable = pressure
function = 0
[]
[inlet_t]
type = FVDirichletBC
boundary = 'left'
variable = temperature
value = 1
[]
[outlet_scalar]
type = FVDirichletBC
boundary = 'middle'
variable = scalar
value = 1
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
block = ${restricted_blocks}
[]
[const]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '2'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient.i)
# Fluid properties
mu = 'mu'
rho = 'rho'
cp = 'cp'
k = 'k'
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
# Numerical scheme
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 20
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${p_outlet}
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${T_inlet}
[]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[velocity_norm]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[mass_time]
type = PWCNSFVMassTimeDerivative
variable = pressure
porosity = 'porosity'
drho_dt = 'drho_dt'
[]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = superficial_vel_x
rho = ${rho}
drho_dt = 'drho_dt'
momentum_component = 'x'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = superficial_vel_y
rho = ${rho}
drho_dt = 'drho_dt'
momentum_component = 'y'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_fluid
cp = ${cp}
dcp_dt = 'dcp_dt'
rho = ${rho}
drho_dt = 'drho_dt'
is_solid = false
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
variable = T_fluid
k = ${k}
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = porosity
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVDirichletBC
variable = T_fluid
value = ${T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = ${p_outlet}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = fp
pressure = 'pressure'
T_fluid = 'T_fluid'
speed = 'velocity_norm'
# To initialize with a high viscosity
mu_rampdown = 'mu_rampdown'
# For porous flow
characteristic_length = 1
porosity = 'porosity'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '${h_fs}'
[]
[]
[Functions]
[mu_rampdown]
type = PiecewiseLinear
x = '1 2 3 4'
y = '1e3 1e2 1e1 1'
[]
[]
[AuxKernels]
[speed]
type = ParsedAux
variable = 'velocity_norm'
args = 'superficial_vel_x superficial_vel_y porosity'
function = 'sqrt(superficial_vel_x*superficial_vel_x + superficial_vel_y*superficial_vel_y) / porosity'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
end_time = 3.0
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/fvkernels/fv_simple_diffusion/dirichlet.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[u]
[]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 7
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 42
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mms/channel-flow/cylindrical/2d-average-with-temp.i)
mu=1.1
rho=1.1
k=1.1
cp=1.1
advected_interp_method='average'
velocity_interp_method='average'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
[]
[]
[Problem]
fv_bcs_integrity_check = true
coord_type = 'RZ'
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
two_term_boundary_expansion = false
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
two_term_boundary_expansion = false
[]
[pressure]
type = INSFVPressureVariable
two_term_boundary_expansion = false
[]
[temperature]
type = INSFVEnergyVariable
two_term_boundary_expansion = false
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[v_forcing]
type = INSFVBodyForce
variable = v
functor = forcing_v
momentum_component = 'y'
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = temperature
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = temperature
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
[]
[temp_forcing]
type = FVBodyForce
variable = temperature
function = forcing_t
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = u
function = 'exact_u'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'bottom'
variable = v
function = 'exact_v'
[]
[no-slip-wall-u]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = u
function = 'exact_u'
[]
[no-slip-wall-v]
type = INSFVNoSlipWallBC
boundary = 'right'
variable = v
function = 'exact_v'
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'top'
variable = pressure
function = 'exact_p'
[]
[axis-u]
type = INSFVSymmetryVelocityBC
boundary = 'left'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = x
[]
[axis-v]
type = INSFVSymmetryVelocityBC
boundary = 'left'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = y
[]
[axis-p]
type = INSFVSymmetryPressureBC
boundary = 'left'
variable = pressure
[]
[axis-inlet-wall-t]
type = FVFunctionDirichletBC
boundary = 'left bottom right'
variable = temperature
function = 'exact_t'
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
[]
[]
[Functions]
[exact_u]
type = ParsedFunction
value = 'sin(x*pi)^2*sin((1/2)*y*pi)'
[]
[exact_rhou]
type = ParsedFunction
value = 'rho*sin(x*pi)^2*sin((1/2)*y*pi)'
vars = 'rho'
vals = '${rho}'
[]
[forcing_u]
type = ADParsedFunction
value = '(1/4)*pi^2*mu*sin(x*pi)^2*sin((1/2)*y*pi) - pi*sin(x*pi)*cos((1/2)*y*pi) + (4*x*pi*rho*sin(x*pi)^3*sin((1/2)*y*pi)^2*cos(x*pi) + rho*sin(x*pi)^4*sin((1/2)*y*pi)^2)/x + (-x*pi*rho*sin(x*pi)^2*sin((1/2)*y*pi)*sin(y*pi)*cos(x*pi) + (1/2)*x*pi*rho*sin(x*pi)^2*cos(x*pi)*cos((1/2)*y*pi)*cos(y*pi))/x - (-2*x*pi^2*mu*sin(x*pi)^2*sin((1/2)*y*pi) + 2*x*pi^2*mu*sin((1/2)*y*pi)*cos(x*pi)^2 + 2*pi*mu*sin(x*pi)*sin((1/2)*y*pi)*cos(x*pi))/x'
vars = 'mu rho'
vals = '${mu} ${rho}'
[]
[exact_v]
type = ParsedFunction
value = 'cos(x*pi)*cos(y*pi)'
[]
[exact_rhov]
type = ParsedFunction
value = 'rho*cos(x*pi)*cos(y*pi)'
vars = 'rho'
vals = '${rho}'
[]
[forcing_v]
type = ADParsedFunction
value = 'pi^2*mu*cos(x*pi)*cos(y*pi) - 2*pi*rho*sin(y*pi)*cos(x*pi)^2*cos(y*pi) - 1/2*pi*sin((1/2)*y*pi)*cos(x*pi) - (-x*pi^2*mu*cos(x*pi)*cos(y*pi) - pi*mu*sin(x*pi)*cos(y*pi))/x + (-x*pi*rho*sin(x*pi)^3*sin((1/2)*y*pi)*cos(y*pi) + 2*x*pi*rho*sin(x*pi)*sin((1/2)*y*pi)*cos(x*pi)^2*cos(y*pi) + rho*sin(x*pi)^2*sin((1/2)*y*pi)*cos(x*pi)*cos(y*pi))/x'
vars = 'mu rho'
vals = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
value = 'cos(x*pi)*cos((1/2)*y*pi)'
[]
[forcing_p]
type = ParsedFunction
value = '-pi*rho*sin(y*pi)*cos(x*pi) + (2*x*pi*rho*sin(x*pi)*sin((1/2)*y*pi)*cos(x*pi) + rho*sin(x*pi)^2*sin((1/2)*y*pi))/x'
vars = 'rho'
vals = '${rho}'
[]
[exact_t]
type = ParsedFunction
value = 'sin(x*pi)*sin((1/2)*y*pi)'
[]
[forcing_t]
type = ParsedFunction
value = '(1/4)*pi^2*k*sin(x*pi)*sin((1/2)*y*pi) - (-x*pi^2*k*sin(x*pi)*sin((1/2)*y*pi) + pi*k*sin((1/2)*y*pi)*cos(x*pi))/x + (3*x*pi*cp*rho*sin(x*pi)^2*sin((1/2)*y*pi)^2*cos(x*pi) + cp*rho*sin(x*pi)^3*sin((1/2)*y*pi)^2)/x + (-x*pi*cp*rho*sin(x*pi)*sin((1/2)*y*pi)*sin(y*pi)*cos(x*pi) + (1/2)*x*pi*cp*rho*sin(x*pi)*cos(x*pi)*cos((1/2)*y*pi)*cos(y*pi))/x'
vars = 'k rho cp'
vals = '${k} ${rho} ${cp}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
[]
[Outputs]
exodus = true
csv = true
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[./L2u]
type = ElementL2Error
variable = u
function = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2v]
type = ElementL2Error
variable = v
function = exact_v
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2p]
variable = pressure
function = exact_p
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2t]
variable = temperature
function = exact_t
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
(modules/navier_stokes/test/tests/finite_volume/pwcns/channel-flow/2d-transient-action.i)
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 20
ny = 5
[]
[]
[Variables]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[velocity_norm]
type = MooseVariableFVReal
[]
[]
[Modules]
[NavierStokesFV]
compressibility = 'weakly-compressible'
add_energy_equation = true
porous_medium_treatment = true
density = 'rho'
dynamic_viscosity = 'mu'
thermal_conductivity = 'k'
specific_heat = 'cp'
initial_velocity = '${u_inlet} 1e-6 0'
initial_pressure = '${p_outlet}'
initial_temperature = '${T_inlet}'
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_function = '${u_inlet} 0'
energy_inlet_types = 'fixed-temperature'
energy_inlet_function = '${T_inlet}'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip symmetry'
energy_wall_types = 'heatflux heatflux'
energy_wall_function = '0 0'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_function = '${p_outlet}'
ambient_convection_alpha = 'h_cv'
ambient_temperature = 'T_solid'
[]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[FVKernels]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = 'porosity'
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '${h_fs}'
[]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = fp
pressure = 'pressure'
T_fluid = 'T_fluid'
speed = 'velocity_norm'
# To initialize with a high viscosity
mu_rampdown = 'mu_rampdown'
# For porous flow
characteristic_length = 1
porosity = 'porosity'
[]
[]
[Functions]
[mu_rampdown]
type = PiecewiseLinear
x = '1 2 3 4'
y = '1e3 1e2 1e1 1'
[]
[]
[AuxKernels]
[speed]
type = ParsedAux
variable = 'velocity_norm'
args = 'superficial_vel_x superficial_vel_y porosity'
function = 'sqrt(superficial_vel_x*superficial_vel_x + superficial_vel_y*superficial_vel_y) / porosity'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
end_time = 3.0
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/fvkernels/mms/non-orthogonal/extended-adr.i)
a=1.1
diff=1.1
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 2
xmax = 3
ymin = 0
ymax = 1
nx = 2
ny = 2
elem_type = TRI3
[../]
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
type = MooseVariableFVReal
face_interp_method = vertex-based
[../]
[]
[FVKernels]
[./advection]
type = FVAdvection
variable = v
velocity = '${a} ${fparse 2*a} 0'
advected_interp_method = 'average'
[../]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
use_point_neighbors = true
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[exact]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-2*a*sin(x)*sin(y) + a*cos(x)*cos(y) + 2*diff*sin(x)*cos(y) + sin(x)*cos(y)'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type'
petsc_options_value = 'hypre'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/ray_tracing/test/tests/raykernels/line_source_ray_kernel/fv_simple_diffusion_line_source.i)
[Mesh]
[gmg]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
xmax = 5
ymax = 5
[]
[]
[Variables/v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[FVKernels/diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 1
[]
[top_bottom]
type = FVDirichletBC
variable = v
boundary = 'top bottom'
value = 2
[]
[]
[Materials/diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
[Problem]
kernel_coverage_check = false
[]
[UserObjects/study]
type = RepeatableRayStudy
names = 'line_source_ray'
start_points = '1 1 0'
end_points = '5 2 0'
execute_on = PRE_KERNELS # must be set for line sources!
[]
[RayKernels/line_source]
type = ADLineSourceRayKernel
variable = v
value = 5
[]
(test/tests/fvkernels/fv-to-fe-coupling/1d.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 40
xmax = 2
[]
[]
[Variables]
[fv]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[]
[fe]
initial_condition = 1
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = fv
coeff = fv_prop
[]
[coupled]
type = FVCoupledForce
v = fv
variable = fv
[]
[]
[Kernels]
[diff]
type = ADFunctorMatDiffusion
variable = fe
diffusivity = fe_prop
[]
[coupled]
type = CoupledForce
v = fv
variable = fe
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = fv
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = fv
boundary = right
value = 1
[]
[]
[BCs]
[left]
type = DirichletBC
variable = fe
boundary = left
value = 0
[]
[right]
type = DirichletBC
variable = fe
boundary = right
value = 1
[]
[]
[Materials]
active = 'fe_mat fv_mat'
[bad_mat]
type = FEFVCouplingMaterial
fe_var = fe
fv_var = fv
execute_on = 'linear nonlinear'
[]
[fe_mat]
type = FEFVCouplingMaterial
fe_var = fe
execute_on = 'linear nonlinear'
[]
[fv_mat]
type = FEFVCouplingMaterial
fv_var = fv
[]
[fe_mat_bad_dep]
type = FEFVCouplingMaterial
fe_var = fe
declared_prop_name = bad
[]
[fv_mat_bad_dep]
type = FEFVCouplingMaterial
fv_var = fv
retrieved_prop_name = bad
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
line_search = 'none'
[]
[Outputs]
exodus = true
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/flux_bcs_velocity.i)
rho = 'rho'
l = 10
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_velocity = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 10
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = ${inlet_velocity}
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[scalar]
type = MooseVariableFVReal
initial_condition = 0.1
[]
[]
[AuxVariables]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = vel_x
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = vel_y
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T_fluid
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T_fluid
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T_fluid
v = power_density
[]
# Scalar concentration equation
[scalar_time]
type = FVTimeKernel
variable = scalar
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
variable = scalar
coeff = 1.1
[]
[scalar_source]
type = FVBodyForce
variable = scalar
function = 2.1
[]
[]
[FVBCs]
# Inlet
[inlet_mass]
type = WCNSFVMassFluxBC
variable = pressure
boundary = 'left'
velocity_pp = 'inlet_u'
rho = 'rho'
[]
[inlet_u]
type = WCNSFVMomentumFluxBC
variable = vel_x
boundary = 'left'
velocity_pp = 'inlet_u'
rho = 'rho'
momentum_component = 'x'
[]
[inlet_v]
type = WCNSFVMomentumFluxBC
variable = vel_y
boundary = 'left'
velocity_pp = 0
rho = 'rho'
momentum_component = 'y'
[]
[inlet_T]
type = WCNSFVEnergyFluxBC
variable = T_fluid
boundary = 'left'
velocity_pp = 'inlet_u'
temperature_pp = 'inlet_T'
rho = 'rho'
cp = 'cp'
[]
[inlet_scalar]
type = WCNSFVScalarFluxBC
variable = scalar
boundary = 'left'
scalar_value_pp = 'inlet_scalar_value'
velocity_pp = 'inlet_u'
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = vel_y
boundary = 'top bottom'
function = 0
[]
[]
# used for the boundary conditions in this example
[Postprocessors]
[inlet_u]
type = Receiver
default = ${inlet_velocity}
[]
[surface_inlet]
type = AreaPostprocessor
boundary = 'left'
execute_on = 'INITIAL'
[]
[inlet_T]
type = Receiver
default = ${inlet_temp}
[]
[inlet_scalar_value]
type = Receiver
default = 0.2
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k dcp_dt'
prop_values = '${cp} ${k} 0'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T_fluid
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T_fluid'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-2
optimal_iterations = 6
[]
end_time = 1
nl_abs_tol = 1e-9
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
[]
[Outputs]
exodus = true
execute_on = FINAL
[]
(test/tests/userobjects/layered_side_integral/layered_side_integral_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 6
ny = 6
nz = 6
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[AuxVariables]
[./layered_integral]
order = CONSTANT
family = MONOMIAL
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[]
[FVBCs]
[./bottom]
type = FVDirichletBC
variable = u
boundary = bottom
value = 0
[../]
[./top]
type = FVDirichletBC
variable = u
boundary = top
value = 1
[../]
[]
[AuxKernels]
[./liaux]
type = SpatialUserObjectAux
variable = layered_integral
boundary = right
user_object = layered_integral
[../]
[]
[UserObjects]
[./layered_integral]
type = LayeredSideIntegral
direction = y
num_layers = 3
variable = u
execute_on = linear
boundary = right
[../]
[]
[Executioner]
type = Steady
nl_abs_tol = 1e-14
nl_rel_tol = 1e-14
l_abs_tol = 1e-14
l_tol = 1e-6
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/fv_adapt/transient-adapt.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
elem_type = QUAD4
[]
[]
[Variables]
[u]
order = CONSTANT
family = MONOMIAL
[]
[v][]
[]
[Functions]
[force]
type = ParsedFunction
value = t
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = v
[]
[force]
type = BodyForce
variable = v
function = force
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = coeff
[]
[force]
type = FVBodyForce
variable = u
function = force
[]
[]
[FVBCs]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[]
[BCs]
[right]
type = DirichletBC
variable = v
boundary = right
value = 1
[]
[left]
type = DirichletBC
variable = v
boundary = left
value = 0
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Transient
num_steps = 2
dt = 1
solve_type = 'NEWTON'
[]
[Adaptivity]
marker = box
initial_steps = 1
[Markers]
[box]
bottom_left = '0.3 0.3 0'
inside = refine
top_right = '0.6 0.6 0'
outside = do_nothing
type = BoxMarker
[]
[]
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/block-restriction/1d.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 20
xmax = 2
[]
[./subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[../]
[./left_right]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'left_right'
[../]
[./right_left]
input = left_right
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'right_left'
[../]
[]
[Variables]
[left]
family = MONOMIAL
order = CONSTANT
fv = true
block = 0
[]
[right]
family = MONOMIAL
order = CONSTANT
fv = true
block = 1
[]
[]
[FVKernels]
[left]
type = FVDiffusion
variable = left
coeff = coeff_left
block = 0
[]
[right]
type = FVDiffusion
variable = right
coeff = coeff_right
block = 1
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = left
boundary = left
value = 0
[]
[left_right]
type = FVDirichletBC
variable = left
boundary = left_right
value = 1
[]
[right_left]
type = FVDirichletBC
variable = right
boundary = right_left
value = 0
[]
[right]
type = FVDirichletBC
variable = right
boundary = right
value = 1
[]
[]
[Materials]
[left]
type = ADGenericFunctorMaterial
prop_names = 'coeff_left'
prop_values = '1'
block = 0
[]
[right]
type = ADGenericFunctorMaterial
prop_names = 'coeff_right'
prop_values = '1'
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
line_search = 'none'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/2d-rc-ambient-convection.i)
mu=1
rho=1
k=1e-3
cp=1
alpha = 1
advected_interp_method='average'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 5
ymin = -1
ymax = 1
nx = 50
ny = 16
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = 1
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_fluid
[]
[ambient_convection]
type = NSFVEnergyAmbientConvection
variable = T_fluid
T_ambient = 100
alpha = 'alpha'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_y
function = 0
[]
[walls-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = vel_x
function = 0
[]
[walls-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = vel_y
function = 0
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[inlet_t]
type = FVDirichletBC
boundary = 'left'
variable = T_fluid
value = 1
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp alpha'
prop_values = '${cp} ${alpha}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Postprocessors]
[temp]
type = ElementAverageValue
variable = T_fluid
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
(modules/navier_stokes/test/tests/finite_volume/fvbcs/FVHeatFluxBC/wall_heat_transfer.i)
flux=10
[GlobalParams]
porosity = 'porosity'
splitting = 'porosity'
locality = 'global'
average_porosity = 'average_eps'
average_k_fluid='average_k_fluid'
average_k_solid='average_k_solid'
average_kappa='average_k_fluid' # because of vector matprop, should be kappa
average_kappa_solid='average_kappa_solid'
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
ny = 20
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 1.0
[]
[Variables]
[Tf]
type = MooseVariableFVReal
[]
[Ts]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[k]
type = MooseVariableFVReal
[]
[kappa]
type = MooseVariableFVReal
[]
[k_s]
type = MooseVariableFVReal
[]
[kappa_s]
type = MooseVariableFVReal
[]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.2
[]
[]
[Functions]
[k]
type = ParsedFunction
value = 0.1*(100*y+1)
[]
[kappa]
type = ParsedFunction
value = 0.2*(200*y+1)
[]
[kappa_s]
type = ParsedFunction
value = 0.4*(200*y+1)
[]
[k_s]
type = ParsedFunction
value = 0.2*(200*y+1)+2*x
[]
[]
[FVKernels]
[Tf_diffusion]
type = FVDiffusion
variable = Tf
coeff = 1
[]
[Ts_diffusion]
type = FVDiffusion
variable = Ts
coeff = 1
[]
[]
[FVBCs]
[left_Ts]
type = NSFVHeatFluxBC
variable = Ts
boundary = 'left'
phase = 'solid'
value = ${flux}
[]
[right_Ts]
type = FVDirichletBC
variable = Ts
boundary = 'right'
value = 1000.0
[]
[left_Tf]
type = NSFVHeatFluxBC
variable = Tf
boundary = 'left'
phase = 'fluid'
value = ${flux}
[]
[right_Tf]
type = FVDirichletBC
variable = Tf
boundary = 'right'
value = 1000.0
[]
[]
[AuxKernels]
[k]
type = ADMaterialRealAux
variable = k
property = 'k'
[]
[k_s]
type = ADMaterialRealAux
variable = k_s
property = 'k_s'
[]
[kappa_s]
type = ADMaterialRealAux
variable = kappa_s
property = 'kappa_s'
[]
[]
[Materials]
[thermal_conductivities_k]
type = ADGenericFunctionMaterial
prop_names = 'k'
prop_values = 'k'
[]
[thermal_conductivities_k_s]
type = ADGenericFunctionMaterial
prop_names = 'k_s'
prop_values = 'k_s'
[]
[thermal_conductivities_kappa]
type = ADGenericConstantVectorMaterial
prop_names = 'kappa'
prop_values = '0.1 0.2 .03'
[]
[thermal_conductivities_kappa_s]
type = ADGenericFunctionMaterial
prop_names = 'kappa_s'
prop_values = 'kappa_s'
[]
[]
[Postprocessors]
[average_eps]
type = ElementAverageValue
variable = porosity
# because porosity is constant in time, we evaluate this only once
execute_on = 'initial'
[]
[average_k_fluid]
type = ElementAverageValue
variable = k
[]
[average_k_solid]
type = ElementAverageValue
variable = k_s
[]
[average_kappa_solid]
type = ElementAverageValue
variable = kappa_s
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
hide = 'porosity average_eps'
[]
(test/tests/fvkernels/fv_simple_diffusion/transient.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 7
[]
[]
[Kernels]
[]
[FVKernels]
[./time]
type = FVTimeKernel
variable = v
[../]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '.2'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
num_steps = 20
dt = 0.1
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/mms/channel-flow/2d-average-with-temp.i)
mu=1.1
rho=1.1
k=1.1
cp=1.1
advected_interp_method='average'
velocity_interp_method='average'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 2
ymin = -1
ymax = 1
nx = 2
ny = 2
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1
two_term_boundary_expansion = false
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1
two_term_boundary_expansion = false
[]
[pressure]
type = INSFVPressureVariable
two_term_boundary_expansion = false
[]
[temperature]
type = INSFVEnergyVariable
two_term_boundary_expansion = false
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mass_forcing]
type = FVBodyForce
variable = pressure
function = forcing_p
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[u_forcing]
type = INSFVBodyForce
variable = u
functor = forcing_u
momentum_component = 'x'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[v_forcing]
type = INSFVBodyForce
variable = v
functor = forcing_v
momentum_component = 'y'
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = temperature
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = temperature
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
[]
[temp_forcing]
type = FVBodyForce
variable = temperature
function = forcing_t
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = 'exact_u'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 'exact_v'
[]
[walls-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = u
function = 'exact_u'
[]
[walls-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = v
function = 'exact_v'
[]
[inlet-and-walls-t]
type = FVFunctionDirichletBC
boundary = 'left top bottom'
variable = temperature
function = 'exact_t'
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 'exact_p'
[]
[]
[Materials]
[const]
type = ADGenericFunctorMaterial
prop_names = 'k cp'
prop_values = '${k} ${cp}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'temperature'
rho = ${rho}
[]
[]
[Functions]
[exact_u]
type = ParsedFunction
value = 'sin((1/2)*y*pi)*cos((1/2)*x*pi)'
[]
[exact_rhou]
type = ParsedFunction
value = 'rho*sin((1/2)*y*pi)*cos((1/2)*x*pi)'
vars = 'rho'
vals = '${rho}'
[]
[forcing_u]
type = ADParsedFunction
value = '(1/2)*pi^2*mu*sin((1/2)*y*pi)*cos((1/2)*x*pi) - 1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi) + (1/2)*pi*rho*sin((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi)^2 - pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)^2*cos((1/2)*x*pi) - 1/4*pi*sin((1/4)*x*pi)*sin((3/2)*y*pi)'
vars = 'mu rho'
vals = '${mu} ${rho}'
[]
[exact_v]
type = ParsedFunction
value = 'sin((1/4)*x*pi)*cos((1/2)*y*pi)'
[]
[exact_rhov]
type = ParsedFunction
value = 'rho*sin((1/4)*x*pi)*cos((1/2)*y*pi)'
vars = 'rho'
vals = '${rho}'
[]
[forcing_v]
type = ADParsedFunction
value = '(5/16)*pi^2*mu*sin((1/4)*x*pi)*cos((1/2)*y*pi) - pi*rho*sin((1/4)*x*pi)^2*sin((1/2)*y*pi)*cos((1/2)*y*pi) - 1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*y*pi) + (1/4)*pi*rho*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi) + (3/2)*pi*cos((1/4)*x*pi)*cos((3/2)*y*pi)'
vars = 'mu rho'
vals = '${mu} ${rho}'
[]
[exact_p]
type = ParsedFunction
value = 'sin((3/2)*y*pi)*cos((1/4)*x*pi)'
[]
[forcing_p]
type = ParsedFunction
value = '-1/2*pi*rho*sin((1/4)*x*pi)*sin((1/2)*y*pi) - 1/2*pi*rho*sin((1/2)*x*pi)*sin((1/2)*y*pi)'
vars = 'rho'
vals = '${rho}'
[]
[exact_t]
type = ParsedFunction
value = 'sin((1/4)*x*pi)*cos((1/2)*y*pi)'
[]
[forcing_t]
type = ParsedFunction
value = '-pi*cp*rho*sin((1/4)*x*pi)^2*sin((1/2)*y*pi)*cos((1/2)*y*pi) - 1/2*pi*cp*rho*sin((1/4)*x*pi)*sin((1/2)*x*pi)*sin((1/2)*y*pi)*cos((1/2)*y*pi) + (1/4)*pi*cp*rho*sin((1/2)*y*pi)*cos((1/4)*x*pi)*cos((1/2)*x*pi)*cos((1/2)*y*pi) + (5/16)*pi^2*k*sin((1/4)*x*pi)*cos((1/2)*y*pi)'
vars = 'k rho cp'
vals = '${k} ${rho} ${cp}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[./L2u]
type = ElementL2Error
variable = u
function = exact_u
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2v]
type = ElementL2Error
variable = v
function = exact_v
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2p]
variable = pressure
function = exact_p
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[./L2t]
variable = temperature
function = exact_t
type = ElementL2Error
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[]
(test/tests/fvkernels/fv_simple_diffusion/fv_only_refined.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
uniform_refine = 1
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/materials/functor_properties/ad_conversion/1d_dirichlet.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmax = 2
[]
[Variables]
[v]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[sink]
type = MooseVariableFVReal
[]
[]
[ICs]
[sink]
type = FunctionIC
variable = sink
function = 'x^3'
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = 1
[]
[sink]
type = FVFunctorElementalKernel
variable = v
functor_name = 'ad_sink'
[]
[]
[FVBCs]
[bounds]
type = FVDirichletBC
variable = v
boundary = 'left right'
value = 0
[]
[]
[Materials]
[converter_to_regular]
type = FunctorADConverter
ad_props_in = 'sink'
reg_props_out = 'regular_sink_0'
[]
# Just to change the name
[functor]
type = GenericFunctorMaterial
prop_names = 'regular_sink_1'
prop_values = 'regular_sink_0'
[]
[converter_to_ad]
type = FunctorADConverter
reg_props_in = 'regular_sink_1'
ad_props_out = 'ad_sink'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
[]
(test/tests/fviks/diffusion/test.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmax = 2
[]
[subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[]
[interface_primary]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'primary_interface'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
block = 0
initial_condition = 0.5
[]
[v]
type = MooseVariableFVReal
block = 1
initial_condition = 0.5
[]
[]
[FVKernels]
[diff_left]
type = FVDiffusion
variable = u
coeff = 'left'
block = 0
[]
[gradient_creating]
type = FVBodyForce
variable = u
[]
[diff_right]
type = FVDiffusion
variable = v
coeff = 'right'
block = 1
[]
[gradient_creating_2]
type = FVBodyForce
variable = v
[]
[]
[FVInterfaceKernels]
[interface]
type = FVDiffusionInterface
variable1 = u
variable2 = v
boundary = 'primary_interface'
subdomain1 = '0'
subdomain2 = '1'
coeff1 = 'left'
coeff2 = 'right'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[v_left]
type = FVDirichletBC
variable = v
boundary = 'right'
value = 0
[]
[]
[Materials]
[block0]
type = ADGenericFunctorMaterial
block = '0'
prop_names = 'left'
prop_values = '1'
[]
[block1]
type = ADGenericFunctorMaterial
block = '1'
prop_names = 'right'
prop_values = '1'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/2d-scalar-transport.i)
mu=1
rho=1
k=1e-3
diff=1e-3
cp=1
advected_interp_method='average'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = -1
ymax = 1
nx = 100
ny = 20
[]
[]
[AuxVariables]
[U]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[AuxKernels]
[mag]
type = VectorMagnitudeAux
variable = U
x = vel_x
y = vel_y
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = 1
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[scalar]
type = INSFVScalarFieldVariable
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_fluid
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
coeff = ${diff}
variable = scalar
[]
[scalar_src]
type = FVBodyForce
variable = scalar
value = 0.1
[]
[scalar_coupled_source]
type = FVCoupledForce
variable = scalar
v = U
coef = 0.1
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_y
function = 0
[]
[walls-u]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = vel_x
function = 0
[]
[walls-v]
type = INSFVNoSlipWallBC
boundary = 'top bottom'
variable = vel_y
function = 0
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[inlet_t]
type = FVDirichletBC
boundary = 'left'
variable = T_fluid
value = 1
[]
[inlet_scalar]
type = FVDirichletBC
boundary = 'left'
variable = scalar
value = 1
[]
[]
[Materials]
[const]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
csv = true
[]
(test/tests/postprocessors/side_diffusive_flux_average/side_diffusive_flux_average_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[]
[FVBCs]
[./left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[../]
[]
[Materials]
[./mat_props]
type = GenericConstantMaterial
block = 0
prop_names = diffusivity
prop_values = 2
[../]
[./mat_props_bnd]
type = GenericConstantMaterial
boundary = right
prop_names = diffusivity
prop_values = 1
[../]
[]
[Postprocessors]
[./avg_flux_right]
# Computes flux integral on the boundary, which should be -1
type = SideDiffusiveFluxAverage
variable = u
boundary = right
diffusivity = diffusivity
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
nl_abs_tol = 1e-14
nl_rel_tol = 1e-14
l_abs_tol = 1e-14
l_tol = 1e-6
[]
[Outputs]
exodus = true
[]
(test/tests/auxkernels/time_derivative_aux/test_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 6
ny = 6
[]
[Variables]
[u]
type = MooseVariableFVReal
initial_condition = 2
[]
[]
[FVKernels]
[time]
type = FVTimeKernel
variable = u
[]
[reaction]
type = FVReaction
variable = u
rate = 2.0
[]
[diffusion]
type = FVDiffusion
variable = u
coeff = 0.1
[]
[]
[FVBCs]
[left]
type = FVNeumannBC
variable = u
value = 5
boundary = 'left'
[]
[]
[AuxVariables]
inactive = 'variable_derivative'
[variable_derivative]
family = MONOMIAL
order = CONSTANT
[]
[variable_derivative_fv]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[AuxKernels]
# Time derivative of a FV variable using the functor system
[function_derivative_element]
type = ADTimeDerivativeAux
variable = variable_derivative_fv
functor = 'u'
factor = 2
[]
# this places the derivative of a FV variable in a FE one
# let's output a warning
inactive = 'function_derivative_element_fv_fe'
[function_derivative_element_fv_fe]
type = ADTimeDerivativeAux
variable = variable_derivative
functor = 'u'
factor = 2
[]
[]
[Executioner]
type = Transient
dt = 0.1
num_steps = 2
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/postprocessors/interface_value/interface_fv_variable_value_postprocessor.i)
postprocessor_type = InterfaceAverageVariableValuePostprocessor
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 6
xmax = 3
ny = 9
ymax = 3
elem_type = QUAD4
[]
[./subdomain_id]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '0 0 0'
top_right = '2 1 0'
block_id = 1
[../]
[./interface]
type = SideSetsBetweenSubdomainsGenerator
input = subdomain_id
primary_block = '0'
paired_block = '1'
new_boundary = 'interface'
[../]
[]
[Functions]
[./fn_exact]
type = ParsedFunction
value = 'x*x+y*y'
[../]
[./ffn]
type = ParsedFunction
value = -4
[../]
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[./ffn]
type = FVBodyForce
variable = u
function = ffn
[../]
[]
[FVBCs]
[./all]
type = FVFunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = fn_exact
[../]
[]
[Materials]
[./stateful1]
type = GenericConstantMaterial
block = 0
prop_names = 'diffusivity'
prop_values = 10
[../]
[./stateful2]
type = GenericConstantMaterial
block = 1
prop_names = 'diffusivity'
prop_values = 4
[../]
[]
[AuxKernels]
[./diffusivity_1]
type = MaterialRealAux
property = diffusivity
variable = diffusivity_1
[]
[./diffusivity_2]
type = MaterialRealAux
property = diffusivity
variable = diffusivity_2
[]
[]
[AuxVariables]
[./diffusivity_1]
family = MONOMIAL
order = CONSTANT
[]
[./diffusivity_2]
family = MONOMIAL
order = CONSTANT
[]
[]
[Postprocessors]
[./diffusivity_average]
type = ${postprocessor_type}
interface_value_type = average
variable = diffusivity_1
neighbor_variable = diffusivity_2
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[./diffusivity_jump_primary_secondary]
type = ${postprocessor_type}
interface_value_type = jump_primary_minus_secondary
variable = diffusivity_1
neighbor_variable = diffusivity_2
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[./diffusivity_jump_secondary_primary]
type = ${postprocessor_type}
interface_value_type = jump_secondary_minus_primary
variable = diffusivity_1
neighbor_variable = diffusivity_2
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[./diffusivity_jump_abs]
type = ${postprocessor_type}
interface_value_type = jump_abs
variable = diffusivity_1
neighbor_variable = diffusivity_2
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[./diffusivity_primary]
type = ${postprocessor_type}
interface_value_type = primary
variable = diffusivity_1
neighbor_variable = diffusivity_2
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[./diffusivity_secondary]
type = ${postprocessor_type}
interface_value_type = secondary
variable = diffusivity_1
neighbor_variable = diffusivity_2
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[./diffusivity_single_variable]
type = ${postprocessor_type}
interface_value_type = primary
variable = diffusivity_1
execute_on = TIMESTEP_END
boundary = 'interface'
[../]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
file_base = ${raw ${postprocessor_type} _fv}
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/multiapp-scalar-transport/scalar-transport.i)
diff=1e-3
advected_interp_method='average'
velocity_interp_method='rc'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
active = 'rc'
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
a_u = ax
a_v = ay
[]
[rc_bad]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = -1
ymax = 1
nx = 100
ny = 20
[]
[]
[Variables]
[scalar]
type = INSFVScalarFieldVariable
[]
[]
[AuxVariables]
[ax]
type = MooseVariableFVReal
[]
[ay]
type = MooseVariableFVReal
[]
[u]
type = INSFVVelocityVariable
[]
[v]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
[]
[]
[FVKernels]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
coeff = ${diff}
variable = scalar
[]
[scalar_src]
type = FVBodyForce
variable = scalar
value = 0.1
[]
[]
[FVBCs]
[inlet_scalar]
type = FVDirichletBC
boundary = 'left'
variable = scalar
value = 1
[]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/fvbcs/fv_radiative_heat_flux/test.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 5
ny = 5
xmax = 2
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[FVKernels]
[diff_left]
type = FVDiffusion
variable = u
coeff = 4
[]
[gradient_creating]
type = FVBodyForce
variable = u
[]
[]
[FVBCs]
[left]
type = FVInfiniteCylinderRadiativeBC
variable = u
boundary = 'left'
boundary_radius = 1
cylinder_radius = 12
cylinder_emissivity = 0.4
[]
[top]
type = FVInfiniteCylinderRadiativeBC
variable = u
# Test setting it separately
temperature = 'u'
boundary = 'top'
boundary_radius = 1
cylinder_radius = 12
cylinder_emissivity = 0.4
[]
[other]
type = FVDirichletBC
variable = u
boundary = 'right bottom'
value = 0
[]
[]
[Materials]
[cht]
type = ADGenericConstantMaterial
prop_names = 'htc'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-transient.i)
# Fluid properties
mu = 1
rho = 1
cp = 1
k = 1e-3
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
# Numerical scheme
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 100
ny = 20
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = superficial_vel_x
v = superficial_vel_y
pressure = pressure
porosity = porosity
[]
[]
[Variables]
[superficial_vel_x]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[superficial_vel_y]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${p_outlet}
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[FVKernels]
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = superficial_vel_x
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_x
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_x
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = superficial_vel_y
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = superficial_vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = superficial_vel_y
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = superficial_vel_y
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_fluid
cp = ${cp}
rho = ${rho}
is_solid = false
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyDiffusion
variable = T_fluid
k = ${k}
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = porosity
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_x
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = superficial_vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = ${fparse u_inlet * rho * cp * T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = superficial_vel_y
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_x
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = superficial_vel_y
u = superficial_vel_x
v = superficial_vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = ${p_outlet}
[]
[]
[Materials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '${h_fs}'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
end_time = 1.5
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/dirichlet_bcs_velocity.i)
rho = 'rho'
l = 10
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_velocity = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 10
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = ${inlet_velocity}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[]
[AuxVariables]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T
v = power_density
[]
[]
[FVBCs]
# Inlet
[inlet_u]
type = WCNSFVInletVelocityBC
variable = u
boundary = 'left'
velocity_pp = 'inlet_u'
[]
[inlet_v]
type = WCNSFVInletVelocityBC
variable = v
boundary = 'left'
velocity_pp = 0
[]
[inlet_T]
type = WCNSFVInletTemperatureBC
variable = T
boundary = 'left'
temperature_pp = 'inlet_T'
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'top bottom'
function = 0
[]
[]
# used for the boundary conditions in this example
[Postprocessors]
[inlet_u]
type = Receiver
default = ${inlet_velocity}
[]
[inlet_T]
type = Receiver
default = ${inlet_temp}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k dcp_dt'
prop_values = '${cp} ${k} 0'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-2
optimal_iterations = 6
[]
end_time = 1
line_search = 'none'
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-effective.i)
mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 100
ny = 20
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = PINSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
porosity = porosity
[]
[]
[Variables]
inactive = 'temp_solid'
[u]
type = PINSFVSuperficialVelocityVariable
initial_condition = ${u_inlet}
[]
[v]
type = PINSFVSuperficialVelocityVariable
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
[]
[temperature]
type = INSFVEnergyVariable
[]
[temp_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
[]
[]
[AuxVariables]
[temp_solid]
family = 'MONOMIAL'
order = 'CONSTANT'
fv = true
initial_condition = 100
[]
[porosity]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 0.5
[]
[]
[FVKernels]
inactive = 'solid_energy_diffusion solid_energy_convection'
[mass]
type = PINSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_advection]
type = PINSFVMomentumAdvection
variable = u
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'x'
[]
[u_viscosity]
type = PINSFVMomentumDiffusion
variable = u
mu = ${mu}
porosity = porosity
momentum_component = 'x'
[]
[u_pressure]
type = PINSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
porosity = porosity
[]
[v_advection]
type = PINSFVMomentumAdvection
variable = v
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
porosity = porosity
momentum_component = 'y'
[]
[v_viscosity]
type = PINSFVMomentumDiffusion
variable = v
mu = ${mu}
porosity = porosity
momentum_component = 'y'
[]
[v_pressure]
type = PINSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
porosity = porosity
[]
[energy_advection]
type = PINSFVEnergyAdvection
variable = temperature
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = PINSFVEnergyAnisotropicDiffusion
kappa = 'kappa'
variable = temperature
porosity = porosity
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = temperature
is_solid = false
T_fluid = temperature
T_solid = temp_solid
h_solid_fluid = 'h_cv'
[]
[solid_energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = temp_solid
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = temp_solid
is_solid = true
T_fluid = temperature
T_solid = temp_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
inactive = 'heated-side'
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = u
function = ${u_inlet}
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = v
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = temperature
value = ${fparse u_inlet * rho * cp * T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = u
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = v
function = 0
[]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'temp_solid'
value = 150
[]
[symmetry-u]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = u
u = u
v = v
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = PINSFVSymmetryVelocityBC
boundary = 'bottom'
variable = v
u = u
v = v
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet-p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = 0.1
[]
[]
[Materials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv'
prop_values = '1'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[kappa]
type = ADGenericVectorFunctorMaterial
prop_names = 'kappa'
prop_values = '1e-3 1e-2 1e-1'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'temperature'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = u
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = temperature
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = temp_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/fvkernels/mms/skewness-correction/adv-diff-react/skewed.i)
a=1.1
diff=1.1
[Mesh]
[gen_mesh]
type = FileMeshGenerator
file = skewed.msh
[]
[]
[Variables]
[v]
initial_condition = 1
type = MooseVariableFVReal
face_interp_method = 'skewness-corrected'
cache_face_gradients = false
cache_face_values = true
[]
[]
[FVKernels]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[advection]
type = FVAdvection
variable = v
velocity = '${a} ${fparse 2*a} 0'
advected_interp_method = 'average'
[]
[reaction]
type = FVReaction
variable = v
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[exact]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-2*a*sin(x)*sin(y) + a*cos(x)*cos(y) + 2*diff*sin(x)*cos(y) + sin(x)*cos(y)'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
[]
[]
(test/tests/fvkernels/fv_simple_diffusion/3d_dirichlet.i)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
ny = 2
nz = 2
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/mms/diffusion.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2
[]
[Variables]
# [u]
# []
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff_v]
type = FVDiffusion
variable = v
coeff = coeff
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[boundary]
type = FVFunctionDirichletBC
boundary = 'left right'
function = 'exact'
variable = v
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = '3*x^2 + 2*x + 1'
[]
[forcing]
type = ParsedFunction
value = '-6'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
# [./L2u]
# type = ElementL2Error
# variable = u
# function = exact
# outputs = 'console'
# execute_on = 'timestep_end'
# [../]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/mms/cylindrical/advection-diffusion-reaction.i)
a=1.1
diff=1.1
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 2
xmax = 3
ymin = 0
ymax = 1
nx = 2
ny = 2
[../]
[]
[Problem]
coord_type = 'RZ'
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[../]
[]
[FVKernels]
[./advection]
type = FVAdvection
variable = v
velocity = '${a} ${a} 0'
advected_interp_method = 'average'
[../]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[exact]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-a*sin(x)*sin(y) + diff*sin(x)*cos(y) + sin(x)*cos(y) + (x*a*cos(x)*cos(y) + a*sin(x)*cos(y))/x - (-x*diff*sin(x)*cos(y) + diff*cos(x)*cos(y))/x'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_shift_type -sub_pc_type'
petsc_options_value = 'asm NONZERO lu'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/fv_simple_diffusion/neumann.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[u]
[]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVNeumannBC
variable = v
boundary = left
value = 5
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[BCs]
[left]
type = NeumannBC
variable = u
boundary = left
value = 5
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 42
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-transient-action.i)
# Fluid properties
mu = 1
rho = 1
cp = 1
k = 1e-3
# Solid properties
cp_s = 2
rho_s = 4
k_s = 1e-2
h_fs = 10
# Operating conditions
u_inlet = 1
T_inlet = 200
p_outlet = 10
top_side_temperature = 150
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 10
ymin = 0
ymax = 1
nx = 100
ny = 20
[]
[]
[Variables]
[T_solid]
type = MooseVariableFVReal
initial_condition = 100
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[Modules]
[NavierStokesFV]
compressibility = 'incompressible'
porous_medium_treatment = true
add_energy_equation = true
density = 'rho'
dynamic_viscosity = 'mu'
thermal_conductivity = 'k'
specific_heat = 'cp'
porosity = 'porosity'
initial_velocity = '${u_inlet} 1e-6 0'
initial_pressure = ${p_outlet}
initial_temperature = 0.0
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_function = '${u_inlet} 0'
energy_inlet_types = 'heatflux'
energy_inlet_function = '${fparse u_inlet * rho * cp * T_inlet}'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip symmetry'
energy_wall_types = 'heatflux heatflux'
energy_wall_function = '0 0'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_function = '${p_outlet}'
ambient_convection_alpha = 'h_cv'
ambient_temperature = 'T_solid'
[]
[]
[FVKernels]
[solid_energy_time]
type = PINSFVEnergyTimeDerivative
variable = T_solid
cp = ${cp_s}
rho = ${rho_s}
is_solid = true
porosity = porosity
[]
[solid_energy_diffusion]
type = FVDiffusion
variable = T_solid
coeff = ${k_s}
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_solid
is_solid = true
T_fluid = T_fluid
T_solid = T_solid
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = ${top_side_temperature}
[]
[]
[Materials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv cp rho mu k'
prop_values = '${h_fs} ${cp} ${rho} ${mu} ${k}'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-12
end_time = 1.5
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(modules/navier_stokes/test/tests/finite_volume/ins/boussinesq/transient-wcnsfv.i)
mu = 1
rho = 'rho'
k = 1
cp = 1
l = 10
velocity_interp_method = 'rc'
advected_interp_method = 'average'
cold_temp=300
hot_temp=310
[GlobalParams]
two_term_boundary_expansion = true
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = ${l}
nx = 16
ny = 16
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = 1e5
[]
[T]
type = INSFVEnergyVariable
scaling = 1e-4
initial_condition = ${cold_temp}
[]
[]
[AuxVariables]
[U]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[vel_x]
order = FIRST
family = MONOMIAL
[]
[vel_y]
order = FIRST
family = MONOMIAL
[]
[viz_T]
order = FIRST
family = MONOMIAL
[]
[]
[AuxKernels]
[mag]
type = VectorMagnitudeAux
variable = U
x = u
y = v
execute_on = 'initial timestep_end'
[]
[vel_x]
type = ParsedAux
variable = vel_x
function = 'u'
execute_on = 'initial timestep_end'
args = 'u'
[]
[vel_y]
type = ParsedAux
variable = vel_y
function = 'v'
execute_on = 'initial timestep_end'
args = 'v'
[]
[viz_T]
type = ParsedAux
variable = viz_T
function = 'T'
execute_on = 'initial timestep_end'
args = 'T'
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[u_gravity]
type = INSFVMomentumGravity
variable = u
gravity = '0 -1 0'
rho = ${rho}
momentum_component = 'x'
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[v_gravity]
type = INSFVMomentumGravity
variable = v
gravity = '0 -1 0'
rho = ${rho}
momentum_component = 'y'
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[]
[FVBCs]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left right top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = left
value = ${hot_temp}
[]
[T_cold]
type = FVDirichletBC
variable = T
boundary = right
value = ${cold_temp}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = IdealGasFluidProperties
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
steady_state_detection = true
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-5
optimal_iterations = 6
[]
nl_abs_tol = 1e-9
normalize_solution_diff_norm_by_dt = false
nl_max_its = 10
[]
[Outputs]
[out]
type = Exodus
[]
[]
(test/tests/dirackernels/constant_point_source/1d_point_source_fv.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
nx = 10
[]
[]
[Variables]
[u]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = coeff
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[DiracKernels]
[point_source1]
type = ConstantPointSource
variable = u
value = 1.0
point = '0.15 0 0'
[]
[point_source2]
type = ConstantPointSource
variable = u
value = -0.5
point = '0.65 0 0'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
file_base = 1d_fv_out
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/boussinesq/boussinesq.i)
mu = 1
rho = 1
k = 1
cp = 1
alpha = 1
velocity_interp_method = 'rc'
advected_interp_method = 'upwind'
rayleigh=1e3
hot_temp=${rayleigh}
temp_ref=${fparse hot_temp / 2.}
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 32
ny = 32
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
[]
[vel_y]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
scaling = 1e-4
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[u_buoyancy]
type = INSFVMomentumBoussinesq
variable = vel_x
T_fluid = T_fluid
gravity = '0 -1 0'
rho = ${rho}
ref_temperature = ${temp_ref}
momentum_component = 'x'
[]
[u_gravity]
type = INSFVMomentumGravity
variable = vel_x
gravity = '0 -1 0'
rho = ${rho}
momentum_component = 'x'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[v_buoyancy]
type = INSFVMomentumBoussinesq
variable = vel_y
T_fluid = T_fluid
gravity = '0 -1 0'
rho = ${rho}
ref_temperature = ${temp_ref}
momentum_component = 'y'
[]
[v_gravity]
type = INSFVMomentumGravity
variable = vel_y
gravity = '0 -1 0'
rho = ${rho}
momentum_component = 'y'
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T_fluid
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[]
[FVBCs]
[top_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'top'
function = 'lid_function'
[]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'left right bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = vel_y
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T_fluid
boundary = left
value = ${hot_temp}
[]
[T_cold]
type = FVDirichletBC
variable = T_fluid
boundary = right
value = 0
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'alpha_b cp k'
prop_values = '${alpha} ${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T_fluid'
rho = ${rho}
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 300 lu NONZERO'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/postprocessors/element_integral_var_pps/pps_old_value_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 4
ny = 4
elem_type = QUAD4
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
initial_condition = 1
[../]
[]
[Functions]
[./force_fn]
type = ParsedFunction
value = '1'
[../]
[./exact_fn]
type = ParsedFunction
value = 't'
[../]
[]
[FVKernels]
[./diff_u]
type = FVDiffusion
variable = u
coeff = '1'
block = '0'
[../]
[./ffn_u]
type = FVBodyForce
variable = u
function = force_fn
[../]
[]
[FVBCs]
[./all_u]
type = FVFunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = exact_fn
[../]
[]
[Postprocessors]
[./a]
type = ElementIntegralVariablePostprocessor
variable = u
execute_on = 'initial timestep_end'
[../]
[./total_a]
type = TimeIntegratedPostprocessor
value = a
execute_on = 'initial timestep_end'
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
execute_on = 'timestep_end'
exodus = true
[]
(modules/navier_stokes/test/tests/postprocessors/rayleigh/natural_convection.i)
mu = 1
rho = 1.1
beta = 1e-4
k = .01
cp = 1000
velocity_interp_method = 'rc'
advected_interp_method = 'average'
l = 4
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = ${l}
nx = 8
ny = 8
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
[]
[v]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
[]
[T]
type = INSFVEnergyVariable
[]
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
rhie_chow_user_object = 'rc'
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
rhie_chow_user_object = 'rc'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
rhie_chow_user_object = 'rc'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
rhie_chow_user_object = 'rc'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
rhie_chow_user_object = 'rc'
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
rhie_chow_user_object = 'rc'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
rhie_chow_user_object = 'rc'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
rhie_chow_user_object = 'rc'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
rhie_chow_user_object = 'rc'
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = 0
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rhie_chow_user_object = 'rc'
[]
[]
[FVBCs]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left right bottom top'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = 'bottom'
value = 1
[]
[T_cold]
type = FVDirichletBC
variable = T
boundary = 'top'
value = 0
[]
[]
[Modules]
[FluidProperties]
[fp]
type = SimpleFluidProperties
density0 = ${rho}
thermal_expansion = ${beta}
[]
[]
[]
[Materials]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
dt = 1
end_time = 10
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 300 lu NONZERO'
nl_abs_tol = 1e-11
automatic_scaling = true
[]
[Postprocessors]
[rayleigh_1]
type = RayleighNumber
rho_min = rho_min
rho_max = rho_max
rho_ave = ${rho}
l = ${l}
mu_ave = ${mu}
k_ave = ${k}
cp_ave = ${cp}
gravity_magnitude = 9.81
[]
[rayleigh_2]
type = RayleighNumber
T_cold = T_min
T_hot = T_max
rho_ave = ${rho}
beta = ${beta}
l = ${l}
mu_ave = ${mu}
k_ave = ${k}
cp_ave = ${cp}
gravity_magnitude = 9.81
[]
[rho_min]
type = ADElementExtremeFunctorValue
functor = 'rho'
value_type = 'min'
[]
[rho_max]
type = ADElementExtremeFunctorValue
functor = 'rho'
value_type = 'max'
[]
[T_min]
type = ElementExtremeValue
variable = 'T'
value_type = 'min'
[]
[T_max]
type = ElementExtremeValue
variable = 'T'
value_type = 'max'
[]
[]
[Outputs]
csv = true
[]
(test/tests/fvkernels/mms/skewness-correction/diffusion/skewed.i)
a=1.1
diff=1.1
[Mesh]
[./gen_mesh]
type = FileMeshGenerator
file = skewed.msh
[../]
[]
[Variables]
[./v]
initial_condition = 1
type = MooseVariableFVReal
face_interp_method = 'skewness-corrected'
cache_face_gradients = false
cache_face_values = true
[../]
[]
[FVKernels]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[exact]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '2*diff*sin(x)*cos(y)'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
[]
[]
(test/tests/fvkernels/mms/grad-reconstruction/rz.i)
a=1.1
diff=1.1
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 2
xmax = 3
ymin = 0
ymax = 1
nx = 2
ny = 2
[../]
[]
[Problem]
coord_type = 'RZ'
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[../]
[]
[FVKernels]
[./advection]
type = FVElementalAdvection
variable = v
velocity = '${a} ${a} 0'
[../]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[diri]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-a*sin(x)*sin(y) + diff*sin(x)*cos(y) + sin(x)*cos(y) + (x*a*cos(x)*cos(y) + a*sin(x)*cos(y))/x - (-x*diff*sin(x)*cos(y) + diff*cos(x)*cos(y))/x'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_shift_type -sub_pc_type'
petsc_options_value = 'asm NONZERO lu'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/mms/grad-reconstruction/cartesian.i)
a=1.1
diff=1.1
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
[../]
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[../]
[]
[FVKernels]
[./advection]
type = FVElementalAdvection
variable = v
velocity = '${a} ${fparse 2 * a} 0'
[../]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[diri]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-2*a*sin(x)*sin(y) + a*cos(x)*cos(y) + 2*diff*sin(x)*cos(y) + sin(x)*cos(y)'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_shift_type -sub_pc_type'
petsc_options_value = 'asm NONZERO lu'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/userobjects/layered_integral/layered_integral_fv_test.i)
###########################################################
# This is a test of the UserObject System. The
# LayeredIntegral UserObject executes independently during
# the solve to compute a user-defined value. In this case
# an integral value in discrete layers along a vector
# in the domain. (Type: ElementalUserObject)
#
# @Requirement F6.40
###########################################################
[Mesh]
type = GeneratedMesh
dim = 2
nx = 6
ny = 6
nz = 6
[]
[Variables]
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[AuxVariables]
[./layered_integral]
order = CONSTANT
family = MONOMIAL
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[]
[AuxKernels]
[./liaux]
type = SpatialUserObjectAux
variable = layered_integral
execute_on = timestep_end
user_object = layered_integral
[../]
[]
[FVBCs]
[./bottom]
type = FVDirichletBC
variable = u
boundary = bottom
value = 0
[../]
[./top]
type = FVDirichletBC
variable = u
boundary = top
value = 1
[../]
[]
[UserObjects]
[./layered_integral]
type = LayeredIntegral
direction = y
num_layers = 3
variable = u
execute_on = linear
[../]
[]
[Executioner]
type = Steady
[]
[Outputs]
file_base = fv_out
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/flux_bcs_direct.i)
rho = 'rho'
l = 10
inlet_area = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_velocity = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 10
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = ${inlet_velocity}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[scalar]
type = MooseVariableFVReal
initial_condition = 0.1
[]
[]
[AuxVariables]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T
v = power_density
[]
# Scalar concentration equation
[scalar_time]
type = FVTimeKernel
variable = scalar
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
variable = scalar
coeff = 1.1
[]
[scalar_source]
type = FVBodyForce
variable = scalar
function = 2.1
[]
[]
[FVBCs]
# Inlet
[inlet_mass]
type = WCNSFVMassFluxBC
variable = pressure
boundary = 'left'
mdot_pp = 'inlet_mdot'
area_pp = 'surface_inlet'
[]
[inlet_u]
type = WCNSFVMomentumFluxBC
variable = u
boundary = 'left'
mdot_pp = 'inlet_mdot'
area_pp = 'surface_inlet'
rho = 'rho'
momentum_component = 'x'
[]
[inlet_v]
type = WCNSFVMomentumFluxBC
variable = v
boundary = 'left'
mdot_pp = 0
area_pp = 'surface_inlet'
rho = 'rho'
momentum_component = 'y'
[]
[inlet_T]
type = WCNSFVEnergyFluxBC
variable = T
boundary = 'left'
energy_pp = 'inlet_Edot'
area_pp = 'surface_inlet'
[]
[inlet_scalar]
type = WCNSFVScalarFluxBC
variable = scalar
boundary = 'left'
scalar_flux_pp = 'inlet_scalar_flux'
area_pp = 'surface_inlet'
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'top bottom'
function = 0
[]
[]
# used for the boundary conditions in this example
[Postprocessors]
[inlet_mdot]
type = Receiver
default = ${fparse 1980 * inlet_velocity * inlet_area}
[]
[surface_inlet]
type = AreaPostprocessor
boundary = 'left'
execute_on = 'INITIAL'
[]
[inlet_Edot]
type = Receiver
default = ${fparse 1980 * inlet_velocity * 2530 * inlet_temp * inlet_area}
[]
[inlet_scalar_flux]
type = Receiver
default = ${fparse inlet_velocity * 0.2 * inlet_area}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = SimpleFluidProperties
density0 = 1980
cp = 2530
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k dcp_dt'
prop_values = '${cp} ${k} 0'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-2
optimal_iterations = 6
[]
end_time = 1
nl_abs_tol = 1e-9
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
[]
[Outputs]
exodus = true
execute_on = FINAL
[]
(test/tests/fvkernels/fv_simple_diffusion/1d_dirichlet.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 2
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/fv_coupled_var/coupled.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 2
[]
[Variables]
[u][]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[w]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[s][]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[rxn]
type = Reaction
variable = u
rate = 2.0
[]
[diffs]
type = Diffusion
variable = s
[]
[prod]
type = CoupledForce
variable = s
v = u
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[rxn]
type = FVReaction
variable = v
rate = 2.0
[]
[diffw]
type = FVDiffusion
variable = w
coeff = coeff
[]
[prod]
type = FVCoupledForce
variable = w
v = 'v'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 1
[]
[leftw]
type = FVDirichletBC
variable = w
boundary = left
value = 0
[]
[rightw]
type = FVDirichletBC
variable = w
boundary = right
value = 1
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 1
[]
[lefts]
type = DirichletBC
variable = s
boundary = left
value = 0
[]
[rights]
type = DirichletBC
variable = s
boundary = right
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/fviks/convection/convection_channel.i)
mu = 1
rho = 1
k = .01
cp = 1
[Mesh]
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 0.5'
dy = '1'
ix = '8 5'
iy = '8'
subdomain_id = '0 1'
[]
[interface]
type = SideSetsBetweenSubdomainsGenerator
input = 'cmg'
primary_block = 0
paired_block = 1
new_boundary = 'interface'
[]
[fluid_side]
type = BreakBoundaryOnSubdomainGenerator
input = 'interface'
boundaries = 'top bottom'
[]
[]
[GlobalParams]
# retain behavior at time of test creation
two_term_boundary_expansion = false
rhie_chow_user_object = 'rc'
advected_interp_method = 'average'
velocity_interp_method = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
block = 0
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
block = 0
initial_condition = 1e-6
[]
[v]
type = INSFVVelocityVariable
block = 0
initial_condition = 1e-6
[]
[pressure]
type = INSFVPressureVariable
block = 0
[]
[T]
type = INSFVEnergyVariable
block = 0
initial_condition = 1
[]
[Ts]
type = INSFVEnergyVariable
block = 1
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
[]
[solid_temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = Ts
[]
[]
[FVInterfaceKernels]
[convection]
type = FVConvectionCorrelationInterface
variable1 = T
variable2 = Ts
boundary = 'interface'
h = 5
temp_solid = Ts
temp_fluid = T
subdomain1 = 0
subdomain2 = 1
wall_cell_is_bulk = true
[]
[]
[FVBCs]
[walls_u]
type = INSFVNoSlipWallBC
variable = u
boundary = 'interface left'
function = 0
[]
[walls_v]
type = INSFVNoSlipWallBC
variable = v
boundary = 'interface left'
function = 0
[]
[inlet_u]
type = INSFVInletVelocityBC
variable = u
boundary = 'bottom_to_0'
function = 0
[]
[inlet_v]
type = INSFVInletVelocityBC
variable = v
boundary = 'bottom_to_0'
function = 1
[]
[inlet_T]
type = FVDirichletBC
variable = T
boundary = 'bottom_to_0'
value = 0.5
[]
[outlet]
type = INSFVMassAdvectionOutflowBC
variable = pressure
boundary = 'top_to_0'
u = u
v = v
rho = ${rho}
[]
[outlet_u]
type = INSFVMomentumAdvectionOutflowBC
variable = u
boundary = 'top_to_0'
u = u
v = v
momentum_component = 'x'
rho = ${rho}
[]
[outlet_v]
type = INSFVMomentumAdvectionOutflowBC
variable = v
boundary = 'top_to_0'
u = u
v = v
momentum_component = 'y'
rho = ${rho}
[]
[heater]
type = FVDirichletBC
variable = 'Ts'
boundary = 'right'
value = 10
[]
[]
[Materials]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
block = 0
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
nl_abs_tol = 1e-14
[]
[Postprocessors]
[max_T]
type = ElementExtremeValue
variable = T
block = 0
[]
[max_Ts]
type = ElementExtremeValue
variable = Ts
block = 1
[]
[mdot_out]
type = VolumetricFlowRate
boundary = 'top_to_0'
vel_x = u
vel_y = v
advected_quantity = ${rho}
[]
[]
[Outputs]
exodus = true
[]
(test/tests/materials/piecewise_by_block_material/test_functor.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmax = 2
[]
[subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 'coeff'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 1
[]
[right]
type = FVDirichletBC
variable = u
boundary = 'right'
value = 0
[]
[]
[Materials]
[coeff_mat]
type = ADPiecewiseByBlockFunctorMaterial
prop_name = 'coeff'
subdomain_to_prop_value = '0 4
1 2'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
exodus = true
[]
(test/tests/indicators/value_jump_indicator/value_jump_indicator_fv.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
[]
[]
[Adaptivity]
[Indicators]
[error]
type = ValueJumpIndicator
variable = something
[]
[]
[]
[Variables]
[u]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[ICs]
[leftright]
type = BoundingBoxIC
variable = something
inside = 1
y2 = 1
y1 = 0
x2 = 0.5
x1 = 0
[]
[]
[AuxVariables]
[something]
order = CONSTANT
family = MONOMIAL
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = coeff
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 'left'
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = 'right'
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/lid-driven/transient-lid-driven-with-energy.i)
mu = 1
rho = 1
k = .01
cp = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 32
ny = 32
[]
[pin]
type = ExtraNodesetGenerator
input = gen
new_boundary = 'pin'
nodes = '0'
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
[]
[v]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
[]
[T]
type = INSFVEnergyVariable
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[ICs]
[T]
type = ConstantIC
variable = T
value = 1
[]
[]
[AuxVariables]
[U]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[AuxKernels]
[mag]
type = VectorMagnitudeAux
variable = U
x = u
y = v
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = 'u'
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = INSFVEnergyTimeDerivative
variable = T
rho = ${rho}
cp = 'cp'
dcp_dt = 0.0
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[]
[FVBCs]
[top_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top'
function = 'lid_function'
[]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left right bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = 'bottom'
value = 1
[]
[T_cold]
type = FVDirichletBC
variable = T
boundary = 'top'
value = 0
[]
[]
[Materials]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
# Run for 100+ timesteps to reach steady state.
num_steps = 5
dt = .5
dtmin = .5
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -ksp_gmres_restart'
petsc_options_value = 'asm lu NONZERO 200'
line_search = 'none'
nl_rel_tol = 1e-12
nl_max_its = 6
l_max_its = 200
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/channel-flow/2d-rc-transient.i)
# Fluid properties
mu = 1.1
rho = 1.1
cp = 1.1
k = 1e-3
# Operating conditions
u_inlet = 1
T_inlet = 200
T_solid = 190
p_outlet = 10
h_fs = 0.01
# Numerical scheme
advected_interp_method='average'
velocity_interp_method='rc'
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 5
ymin = -1
ymax = 1
nx = 50
ny = 20
[]
[]
[Problem]
fv_bcs_integrity_check = true
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = ${u_inlet}
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-12
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${T_inlet}
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = INSFVMomentumTimeDerivative
variable = vel_x
rho = ${rho}
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = INSFVMomentumTimeDerivative
variable = vel_y
rho = ${rho}
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[energy_time]
type = INSFVEnergyTimeDerivative
variable = T_fluid
cp = ${cp}
dcp_dt = 0.0
rho = ${rho}
[]
[energy_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[energy_diffusion]
type = FVDiffusion
variable = T_fluid
coeff = ${k}
[]
[energy_convection]
type = PINSFVEnergyAmbientConvection
variable = T_fluid
is_solid = false
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = 'h_cv'
[]
[]
[FVBCs]
[inlet-u]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_x
function = '1'
[]
[inlet-v]
type = INSFVInletVelocityBC
boundary = 'left'
variable = vel_y
function = 0
[]
[inlet-T]
type = FVNeumannBC
variable = T_fluid
value = ${fparse u_inlet * rho * cp * T_inlet}
boundary = 'left'
[]
[no-slip-u]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = vel_x
function = 0
[]
[no-slip-v]
type = INSFVNoSlipWallBC
boundary = 'top'
variable = vel_y
function = 0
[]
[symmetry-u]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = vel_x
u = vel_x
v = vel_y
mu = ${mu}
momentum_component = 'x'
[]
[symmetry-v]
type = INSFVSymmetryVelocityBC
boundary = 'bottom'
variable = vel_y
u = vel_x
v = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[symmetry-p]
type = INSFVSymmetryPressureBC
boundary = 'bottom'
variable = pressure
[]
[outlet_u]
type = INSFVMomentumAdvectionOutflowBC
variable = vel_x
u = vel_x
v = vel_y
boundary = 'right'
momentum_component = 'x'
rho = ${rho}
[]
[outlet_v]
type = INSFVMomentumAdvectionOutflowBC
variable = vel_y
u = vel_x
v = vel_y
boundary = 'right'
momentum_component = 'y'
rho = ${rho}
[]
[outlet_p]
type = INSFVOutletPressureBC
boundary = 'right'
variable = pressure
function = '${p_outlet}'
[]
[]
[Materials]
[constants]
type = ADGenericFunctorMaterial
prop_names = 'h_cv T_solid'
prop_values = '${h_fs} ${T_solid}'
[]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp'
prop_values = '${cp}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = 'T_fluid'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 7e-13
dt = 0.4
end_time = 0.8
[]
[Outputs]
exodus = true
csv = true
[]
(test/tests/materials/piecewise_by_block_material/test.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 10
xmax = 2
[]
[subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '1.0 0 0'
block_id = 1
top_right = '2.0 1.0 0'
[]
[middle]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
new_boundary = middle
paired_block = 1
primary_block = 0
[]
[]
[Variables]
[dummy]
type = MooseVariableFVReal
[]
[]
# This is added to have sufficient ghosting layers, see #19534
[FVKernels]
[diff]
type = FVDiffusion
variable = 'dummy'
coeff = 1
[]
[]
[AuxVariables]
[u]
type = MooseVariableFVReal
[]
[v]
type = MooseVariableFVReal
[InitialCondition]
type = FunctionIC
function = '4 * (x - 7) * (x - 8)'
[]
[]
[]
[AuxKernels]
# to trigger off-boundary element computations
[to_var]
type = ADMaterialRealAux
variable = 'u'
property = coeff
[]
[]
[Materials]
[coeff_mat]
type = ADPiecewiseConstantByBlockMaterial
prop_name = 'coeff'
subdomain_to_prop_value = '0 4
1 2'
[]
[]
[Postprocessors]
# to trigger on boundary element computations
[flux]
type = ADSideDiffusiveFluxIntegral
boundary = left
variable = v
diffusivity = 'coeff'
[]
# to trigger ghost evaluations
[flux_mid]
type = ADInterfaceDiffusiveFluxIntegral
boundary = middle
variable = v
diffusivity = 'coeff'
[]
[]
[Executioner]
type = Steady
[]
[Problem]
solve = false
[]
[Outputs]
exodus = true
# To get level of ghosting
[console]
type = Console
system_info = 'framework mesh aux nonlinear execution relationship'
[]
[]
(test/tests/fvkernels/scaling/auto-scaling.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff_u]
type = FVDiffusion
variable = u
coeff = coeff_u
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = coeff_v
[]
[]
[FVBCs]
[left_u]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[right_u]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[left_v]
type = FVDirichletBC
variable = v
boundary = left
value = 0
[]
[right_v]
type = FVDirichletBC
variable = v
boundary = right
value = 1
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff_u coeff_v'
prop_values = '1 1e-20'
[]
[]
[Executioner]
type = Steady
petsc_options = '-pc_svd_monitor'
petsc_options_iname = '-pc_type'
petsc_options_value = 'svd'
automatic_scaling = true
verbose = true
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/fv_dotdot/fv_dotdot.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 7
[]
[]
[Kernels]
[]
[FVKernels]
[./time]
type = FVTimeKernel
variable = v
[../]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '.2'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
scheme = newmark-beta
num_steps = 20
dt = 0.1
[]
[Postprocessors]
[vdotdot]
type = ADElementAverageSecondTimeDerivative
variable = v
[]
[]
[Outputs]
csv = true
[]
(modules/ray_tracing/test/tests/raykernels/variable_integral_ray_kernel/fv_simple_diffusion_line_integral.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
xmax = 10
ymax = 10
[]
[Variables/v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[FVKernels/diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[top_bottom]
type = FVDirichletBC
variable = v
boundary = 'top bottom'
value = 1
[]
[]
[Materials/diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[UserObjects/study]
type = RepeatableRayStudy
names = 'diag
right_up'
start_points = '0 0 0
10 0 0'
end_points = '10 10 0
10 10 0'
[]
[RayKernels/v_integral]
type = VariableIntegralRayKernel
study = study
variable = v
[]
[Postprocessors]
[diag_line_integral]
type = RayIntegralValue
ray_kernel = v_integral
ray = diag
[]
[right_up_line_integral]
type = RayIntegralValue
ray_kernel = v_integral
ray = right_up
[]
[]
[Problem]
kernel_coverage_check = false
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
csv = true
exodus = false
[]
(test/tests/fvkernels/fv_simple_diffusion/fv_only.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(test/tests/postprocessors/side_integral/side_integral_functor.i)
[Mesh]
inactive = 'refine'
# U-shaped domains to have internal boundaries in
# a variety of directions
[cmg]
type = CartesianMeshGenerator
dim = 2
dx = '1 1 1'
dy = '3 1'
ix = '4 5 3'
iy = '12 4'
subdomain_id = '1 2 1
1 1 1'
[]
[internal_boundary_dir1]
type = SideSetsBetweenSubdomainsGenerator
input = cmg
primary_block = 1
paired_block = 2
new_boundary = 'inside_1'
[]
[internal_boundary_dir2]
type = SideSetsBetweenSubdomainsGenerator
input = internal_boundary_dir1
primary_block = 2
paired_block = 1
new_boundary = 'inside_2'
[]
[refine]
type = RefineBlockGenerator
input = internal_boundary_dir2
block = '1 2'
refinement = '2 1'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
block = 1
[]
[]
[AuxVariables]
[v1]
type = MooseVariableFVReal
block = 1
[InitialCondition]
type = FunctionIC
function = 'x + y'
[]
[]
[v2]
type = MooseVariableFVReal
block = 2
[InitialCondition]
type = FunctionIC
function = '2*x*x - y'
[]
[]
[]
[Functions]
[f1]
type = ADParsedFunction
value = 'exp(x - y)'
[]
[]
[Materials]
[m1]
type = ADGenericFunctorMaterial
prop_names = 'm1'
prop_values = 'f1'
[]
[m2]
type = ADPiecewiseByBlockFunctorMaterial
prop_name = 'm2'
subdomain_to_prop_value = '1 12
2 4'
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = '1'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = 3
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = 1
value = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Postprocessors]
# Mesh external boundaries integration
[ext_u]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = u
restrict_to_functors_domain = true
[]
[ext_v1]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left right'
functor = v1
[]
[ext_v2]
type = ADSideIntegralFunctorPostprocessor
boundary = 'top'
functor = v2
restrict_to_functors_domain = true
[]
[ext_f1]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = f1
prefactor = f1
[]
[ext_m1]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = m1
restrict_to_functors_domain = true
[]
[ext_m2]
type = ADSideIntegralFunctorPostprocessor
boundary = 'left top right'
functor = m2
restrict_to_functors_domain = true
[]
# Internal to the mesh, but a side to the variables
# With orientation of normal 1->2
[int_s1_u]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = u
[]
[int_s1_v1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = v1
[]
[int_s1_f1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = f1
[]
[int_s1_m1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = m1
[]
[int_s1_m2]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_1
functor = m2
[]
# With orientation of normal 2->1
[int_s2_v2]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = v2
[]
[int_s2_f1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = f1
[]
[int_s2_m1]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = m1
[]
[int_s2_m2]
type = ADSideIntegralFunctorPostprocessor
boundary = inside_2
functor = m2
[]
[]
[Outputs]
csv = true
exodus = true
[]
[Problem]
kernel_coverage_check = false
[]
(test/tests/fvkernels/mms/non-orthogonal/advection-diffusion-reaction.i)
a=1.1
diff=1.1
[Mesh]
[./gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 2
xmax = 3
ymin = 0
ymax = 1
nx = 2
ny = 2
elem_type = TRI3
[../]
[]
[Variables]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[../]
[]
[FVKernels]
[./advection]
type = FVAdvection
variable = v
velocity = '${a} ${fparse 2*a} 0'
advected_interp_method = 'average'
[../]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[exact]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-2*a*sin(x)*sin(y) + a*cos(x)*cos(y) + 2*diff*sin(x)*cos(y) + sin(x)*cos(y)'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type'
petsc_options_value = 'hypre'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/misc/check_error/incomplete_fvkernel_block_coverage_test.i)
[Mesh]
file = rectangle.e
[]
[Variables]
active = 'u'
[./u]
order = CONSTANT
family = MONOMIAL
fv = true
[../]
[]
[FVKernels]
active = 'diff body_force'
[./diff]
type = FVDiffusion
variable = u
block = 1
coeff = 1
[../]
[./body_force]
type = FVBodyForce
variable = u
block = 1
value = 10
[../]
[]
[FVBCs]
active = 'right'
[./left]
type = FVDirichletBC
variable = u
boundary = 1
value = 1
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = 2
value = 1
[../]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
[]
[Outputs]
[]
(test/tests/fvkernels/fv_simple_diffusion/dirichlet_rz.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
# x can't start at zero because FV's weak dirichlet BCs need a non-zero area
# on the left so their numerical flux contribution isn't zero'd out -
# causing there to basically be no BC on the left.
xmin = .1
xmax = 1
[]
[Variables]
[u]
[]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
[]
[]
[Kernels]
[diff]
type = Diffusion
variable = u
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 42
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = u
boundary = left
value = 7
[]
[right]
type = DirichletBC
variable = u
boundary = right
value = 42
[]
[]
[Problem]
type = FEProblem
coord_type = RZ
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/pins/channel-flow/heated/2d-rc-heated-action.i)
mu=1
rho=1
k=1e-3
cp=1
u_inlet=1
T_inlet=200
h_cv = 1.0
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '5 5'
dy = '1.0'
ix = '50 50'
iy = '20'
subdomain_id = '1 2'
[]
[]
[Variables]
[T_solid]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.5
[]
[]
[Modules]
[NavierStokesFV]
compressibility = 'incompressible'
porous_medium_treatment = true
add_energy_equation = true
density = ${rho}
dynamic_viscosity = ${mu}
thermal_conductivity = ${k}
specific_heat = ${cp}
porosity = 'porosity'
initial_velocity = '${u_inlet} 1e-6 0'
initial_pressure = 0.0
initial_temperature = 0.0
inlet_boundaries = 'left'
momentum_inlet_types = 'fixed-velocity'
momentum_inlet_function = '${u_inlet} 0'
energy_inlet_types = 'heatflux'
energy_inlet_function = '${fparse u_inlet * rho * cp * T_inlet}'
wall_boundaries = 'top bottom'
momentum_wall_types = 'noslip symmetry'
energy_wall_types = 'heatflux heatflux'
energy_wall_function = '0 0'
outlet_boundaries = 'right'
momentum_outlet_types = 'fixed-pressure'
pressure_function = '0.1'
ambient_convection_alpha = ${h_cv}
ambient_temperature = 'T_solid'
[]
[]
[FVKernels]
[solid_energy_diffusion]
type = FVDiffusion
coeff = ${k}
variable = T_solid
[]
[solid_energy_convection]
type = PINSFVEnergyAmbientConvection
variable = 'T_solid'
is_solid = true
T_fluid = 'T_fluid'
T_solid = 'T_solid'
h_solid_fluid = ${h_cv}
[]
[]
[FVBCs]
[heated-side]
type = FVDirichletBC
boundary = 'top'
variable = 'T_solid'
value = 150
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
line_search = 'none'
nl_rel_tol = 1e-14
[]
# Some basic Postprocessors to examine the solution
[Postprocessors]
[inlet-p]
type = SideAverageValue
variable = pressure
boundary = 'left'
[]
[outlet-u]
type = SideAverageValue
variable = superficial_vel_x
boundary = 'right'
[]
[outlet-temp]
type = SideAverageValue
variable = T_fluid
boundary = 'right'
[]
[solid-temp]
type = ElementAverageValue
variable = T_solid
[]
[]
[Outputs]
exodus = true
csv = false
[]
(test/tests/indicators/analytical_indicator/analytical_indicator_fv.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 20
ny = 1
[]
[]
[Variables]
[u]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[Functions]
[solution]
type = ParsedFunction
value = (exp(x)-1)/(exp(1)-1)
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = coeff
[]
[conv]
type = FVAdvection
variable = u
velocity = '1 0 0'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Adaptivity]
[Indicators]
[error]
type = AnalyticalIndicator
variable = u
function = solution
[]
[]
[]
[Outputs]
exodus = true
[]
(test/tests/postprocessors/element_variable_value/elemental_variable_value_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 1
ymax = 0.1
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 0.1
[../]
[]
[FVBCs]
[./left]
type = FVDirichletBC
variable = u
boundary = left
value = 1
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = right
value = 10
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Postprocessors]
[./elem_left]
type = ElementalVariableValue
variable = u
elementid = 0
[]
[./elem_right]
type = ElementalVariableValue
variable = u
elementid = 9
[]
[]
[Outputs]
csv = true
[]
(test/tests/vectorpostprocessors/point_value_sampler/point_value_sampler_fv.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[./u]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[./v]
family = MONOMIAL
order = CONSTANT
fv = true
[../]
[]
[FVKernels]
[./diff]
type = FVDiffusion
variable = u
coeff = 1
[../]
[./diff_v]
type = FVDiffusion
variable = v
coeff = 1
[../]
[]
[FVBCs]
[./left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[../]
[./right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[../]
[./left_v]
type = FVDirichletBC
variable = v
boundary = left
value = 1
[../]
[./right_v]
type = FVDirichletBC
variable = v
boundary = right
value = 0
[../]
[]
[VectorPostprocessors]
[./point_sample]
type = PointValueSampler
warn_discontinuous_face_values = false
variable = 'u v'
points = '0.09 0.09 0 0.23 0.4 0 0.78 0.2 0'
sort_by = x
[../]
[]
[Executioner]
type = Steady
solve_type = PJFNK
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[]
[Outputs]
execute_on = 'timestep_end'
csv = true
[]
(test/tests/fvkernels/mms/grad-reconstruction/mat-cartesian.i)
a=1.1
diff=1.1
[Mesh]
[gen_mesh]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 2
ny = 2
[]
[]
[Variables]
[v]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[]
[]
[FVKernels]
[advection]
type = FVElementalAdvection
variable = v
velocity = '${a} ${fparse 2 * a} 0'
advected_quantity = 'mat_u'
grad_advected_quantity = 'mat_grad_u'
[]
[reaction]
type = FVReaction
variable = v
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = ${diff}
[]
[body_v]
type = FVBodyForce
variable = v
function = 'forcing'
[]
[]
[FVBCs]
[diri]
type = FVFunctionDirichletBC
boundary = 'left right top bottom'
function = 'exact'
variable = v
[]
[]
[Materials]
[mat]
type = ADCoupledGradientMaterial
mat_prop = 'mat_u'
grad_mat_prop = 'mat_grad_u'
u = v
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'sin(x)*cos(y)'
[]
[forcing]
type = ParsedFunction
value = '-2*a*sin(x)*sin(y) + a*cos(x)*cos(y) + 2*diff*sin(x)*cos(y) + sin(x)*cos(y)'
vars = 'a diff'
vals = '${a} ${diff}'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -sub_pc_factor_shift_type -sub_pc_type'
petsc_options_value = 'asm NONZERO lu'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/constraints/bounded_value.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
[]
[Variables]
[v]
type = MooseVariableFVReal
# breaks the constraint
initial_condition = -1
[]
[lambda]
type = MooseVariableScalar
[]
[]
[FVKernels]
[time]
type = FVTimeKernel
variable = v
[]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[average]
type = FVBoundedValueConstraint
variable = v
phi0 = 0
lambda = lambda
bound_type = 'HIGHER_THAN'
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 7
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 0
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'Newton'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
num_steps = 2
dt = 0.001
nl_abs_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/auxkernels/peclet-number-functor-aux/fv-thermal.i)
mu = 1
rho = 1
k = 1
cp = 1
[GlobalParams]
velocity_interp_method = 'rc'
# Maximum cell Peclet number is ~.1 so energy transport is stable without upwinding
advected_interp_method = 'average'
rhie_chow_user_object = 'rc'
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
ny = 10
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
[]
[v]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
[]
[T]
type = INSFVEnergyVariable
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[AuxVariables]
[Pe]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[Pe]
type = PecletNumberFunctorAux
variable = Pe
speed = speed
thermal_diffusivity = 'thermal_diffusivity'
[]
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = 'mu'
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = 'mu'
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_conduction]
type = FVDiffusion
coeff = ${k}
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
[]
[]
[FVBCs]
[top_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top'
function = 1
[]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'left right bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T
boundary = 'bottom'
value = 1
[]
[T_cold]
type = FVDirichletBC
variable = T
boundary = 'top'
value = 0
[]
[]
[Materials]
[mu]
type = ADGenericFunctorMaterial
prop_names = 'mu'
prop_values = '${mu}'
[]
[speed]
type = ADVectorMagnitudeFunctorMaterial
x_functor = u
y_functor = v
vector_magnitude_name = speed
[]
[thermal_diffusivity]
type = ThermalDiffusivityFunctorMaterial
k = ${k}
rho = ${rho}
cp = ${cp}
[]
[enthalpy]
type = INSFVEnthalpyMaterial
rho = ${rho}
temperature = T
cp = ${cp}
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 100 lu NONZERO'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/block-restriction/just-mat-blk-restriction.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 50
xmax = 4
[]
[./subdomain1]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '2.0 0 0'
block_id = 1
top_right = '4.0 1.0 0'
[../]
[./left_right]
input = subdomain1
type = SideSetsBetweenSubdomainsGenerator
primary_block = '0'
paired_block = '1'
new_boundary = 'left_right'
[../]
[./right_left]
input = left_right
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'right_left'
[../]
[]
[Variables]
[fv]
family = MONOMIAL
order = CONSTANT
fv = true
initial_condition = 1
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = fv
coeff = diff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = fv
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = fv
boundary = right
value = 1
[]
[]
[Materials]
[left]
type = ADGenericFunctorMaterial
prop_names = 'diff'
prop_values = '1'
block = 0
[]
[right]
type = ADGenericFunctorMaterial
prop_names = 'diff'
prop_values = '2'
block = 1
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
line_search = 'none'
[]
[Outputs]
exodus = true
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/dirichlet_bcs_mdot.i)
rho = 'rho'
l = 10
inlet_area = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_velocity = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 10
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = ${inlet_velocity}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[]
[AuxVariables]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T
v = power_density
[]
[]
[FVBCs]
# Inlet
[inlet_u]
type = WCNSFVInletVelocityBC
variable = u
boundary = 'left'
mdot_pp = 'inlet_mdot'
area_pp = 'surface_inlet'
rho = 'rho'
[]
[inlet_v]
type = WCNSFVInletVelocityBC
variable = v
boundary = 'left'
mdot_pp = 0
area_pp = 'surface_inlet'
rho = 'rho'
[]
[inlet_T]
type = WCNSFVInletTemperatureBC
variable = T
boundary = 'left'
temperature_pp = 'inlet_T'
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'top bottom'
function = 0
[]
[]
# used for the boundary conditions in this example
[Postprocessors]
[inlet_mdot]
type = Receiver
default = ${fparse 1980 * inlet_velocity * inlet_area}
[]
[surface_inlet]
type = AreaPostprocessor
boundary = 'left'
execute_on = 'INITIAL'
[]
[inlet_T]
type = Receiver
default = ${inlet_temp}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k dcp_dt'
prop_values = '${cp} ${k} 0'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-2
optimal_iterations = 6
[]
end_time = 1
nl_abs_tol = 1e-9
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
[]
[Outputs]
exodus = true
execute_on = 'FINAL'
[]
(modules/navier_stokes/test/tests/finite_volume/fvbcs/FVFunctorHeatFluxBC/wall_heat_transfer.i)
flux=10
[GlobalParams]
porosity = 'porosity'
splitting = 'porosity'
locality = 'global'
average_porosity = 'average_eps'
average_k_fluid='average_k_fluid'
average_k_solid='average_k_solid'
average_kappa='average_k_fluid' # because of vector matprop, should be kappa
average_kappa_solid='average_kappa_solid'
[]
[Mesh]
type = GeneratedMesh
dim = 2
nx = 5
ny = 20
xmin = 0.0
xmax = 1.0
ymin = 0.0
ymax = 1.0
[]
[Variables]
[Tf]
type = MooseVariableFVReal
[]
[Ts]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[k]
type = MooseVariableFVReal
[]
[kappa]
type = MooseVariableFVReal
[]
[k_s]
type = MooseVariableFVReal
[]
[kappa_s]
type = MooseVariableFVReal
[]
[porosity]
type = MooseVariableFVReal
initial_condition = 0.2
[]
[]
[Functions]
[k_function]
type = ADParsedFunction
value = 0.1*(100*y+1)
[]
[kappa_function]
type = ADParsedFunction
value = 0.2*(200*y+1)
[]
[kappa_s_function]
type = ADParsedFunction
value = 0.4*(200*y+1)
[]
[k_s_function]
type = ADParsedFunction
value = 0.2*(200*y+1)+2*x
[]
[]
[FVKernels]
[Tf_diffusion]
type = FVDiffusion
variable = Tf
coeff = 1
[]
[Ts_diffusion]
type = FVDiffusion
variable = Ts
coeff = 1
[]
[]
[FVBCs]
[left_Ts]
type = NSFVFunctorHeatFluxBC
variable = Ts
boundary = 'left'
phase = 'solid'
value = ${flux}
k = 'k_mat'
k_s = 'k_s_mat'
kappa = 'kappa_mat'
kappa_s = 'kappa_s_mat'
[]
[right_Ts]
type = FVDirichletBC
variable = Ts
boundary = 'right'
value = 1000.0
[]
[left_Tf]
type = NSFVFunctorHeatFluxBC
variable = Tf
boundary = 'left'
phase = 'fluid'
value = ${flux}
k = 'k_mat'
k_s = 'k_s_mat'
kappa = 'kappa_mat'
kappa_s = 'kappa_s_mat'
[]
[right_Tf]
type = FVDirichletBC
variable = Tf
boundary = 'right'
value = 1000.0
[]
[]
[AuxKernels]
[k]
type = ADFunctorElementalAux
variable = k
functor = 'k_mat'
[]
[k_s]
type = ADFunctorElementalAux
variable = k_s
functor = 'k_s_mat'
[]
[kappa_s]
type = ADFunctorElementalAux
variable = kappa_s
functor = 'kappa_s_mat'
[]
[]
[Materials]
[thermal_conductivities_k]
type = ADGenericFunctorMaterial
prop_names = 'k_mat'
prop_values = 'k_function'
[]
[thermal_conductivities_k_s]
type = ADGenericFunctorMaterial
prop_names = 'k_s_mat'
prop_values = 'k_s_function'
[]
[thermal_conductivities_kappa]
type = ADGenericVectorFunctorMaterial
prop_names = 'kappa_mat'
prop_values = '0.1 0.2 .03'
[]
[thermal_conductivities_kappa_s]
type = ADGenericFunctorMaterial
prop_names = 'kappa_s_mat'
prop_values = 'kappa_s_function'
[]
[]
[Postprocessors]
[average_eps]
type = ElementAverageValue
variable = porosity
# because porosity is constant in time, we evaluate this only once
execute_on = 'initial'
[]
[average_k_fluid]
type = ElementAverageValue
variable = k
[]
[average_k_solid]
type = ElementAverageValue
variable = k_s
[]
[average_kappa_solid]
type = ElementAverageValue
variable = kappa_s
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
exodus = true
hide = 'porosity average_eps'
[]
(test/tests/fvbcs/fv_neumannbc/fv_neumannbc.i)
[Mesh]
[mesh]
type = CartesianMeshGenerator
dim = 2
dx = '1 1'
dy = '1'
ix = '5 5'
iy = '5'
subdomain_id = '1 1'
[]
[internal_sideset]
type = ParsedGenerateSideset
combinatorial_geometry = 'x<1.01 & x>0.99'
included_subdomain_ids = 1
new_sideset_name = 'center'
input = 'mesh'
[]
[]
[Variables]
[u]
family = MONOMIAL
order = CONSTANT
fv = true
block = 1
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[]
[FVBCs]
inactive = 'center'
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 1
[]
[right]
type = FVNeumannBC
variable = u
boundary = right
value = 4
[]
# Internal center sideset, should cause erroring out
[center]
type = FVNeumannBC
variable = u
boundary = center
value = 0
[]
[]
[Executioner]
type = Steady
solve_type = 'Newton'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[Outputs]
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/ins/lid-driven/lid-driven-with-energy.i)
mu = 1
rho = 1
k = .01
cp = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 1
ymin = 0
ymax = 1
nx = 32
ny = 32
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
[]
[vel_y]
type = INSFVVelocityVariable
[]
[pressure]
type = INSFVPressureVariable
[]
[T_fluid]
type = INSFVEnergyVariable
[]
[lambda]
family = SCALAR
order = FIRST
[]
[]
[AuxVariables]
[U]
order = CONSTANT
family = MONOMIAL
fv = true
[]
[]
[AuxKernels]
[mag]
type = VectorMagnitudeAux
variable = U
x = vel_x
y = vel_y
[]
[]
[FVKernels]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[mean_zero_pressure]
type = FVScalarLagrangeMultiplier
variable = pressure
lambda = lambda
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T_fluid
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[]
[FVBCs]
[top_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'top'
function = 'lid_function'
[]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'left right bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = vel_y
boundary = 'left right top bottom'
function = 0
[]
[T_hot]
type = FVDirichletBC
variable = T_fluid
boundary = 'bottom'
value = 1
[]
[T_cold]
type = FVDirichletBC
variable = T_fluid
boundary = 'top'
value = 0
[]
[]
[Materials]
[functor_constants]
type = ADGenericFunctorMaterial
prop_names = 'cp k'
prop_values = '${cp} ${k}'
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T_fluid'
rho = ${rho}
[]
[]
[Functions]
[lid_function]
type = ParsedFunction
value = '4*x*(1-x)'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -ksp_gmres_restart -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'asm 300 lu NONZERO'
nl_rel_tol = 1e-12
[]
[Outputs]
exodus = true
[]
(test/tests/fvkernels/fv_simple_diffusion/grad-adaptive.i)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
[]
[Variables]
[v]
type = MooseVariableFVReal
initial_condition = 0
[]
[]
[AuxVariables]
[dummy]
type = MooseVariableFVReal
[]
[]
[FVKernels]
[time]
type = FVTimeKernel
variable = v
[]
[diff]
type = FVDiffusion
variable = v
coeff = coeff
[]
[]
[FVBCs]
[left]
type = FVDirichletBC
variable = v
boundary = left
value = 0
[]
[right]
type = FVDirichletBC
variable = v
boundary = right
value = 1
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Postprocessors]
[average]
type = ElementAverageValue
variable = v
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_hypre_type'
petsc_options_value = 'hypre boomeramg'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-6
optimal_iterations = 6
[]
end_time = 1000
nl_abs_tol = 1e-8
[]
[Outputs]
exodus = false
[csv]
type = CSV
execute_on = 'final'
[]
[]
[Adaptivity]
steps = 1
marker = error
[Indicators]
[jump]
type = GradientJumpIndicator
variable = v
[]
[]
[Markers]
[error]
type = ErrorFractionMarker
coarsen = 0.1
refine = 0.7
indicator = jump
[]
[]
max_h_level = 1
[]
(test/tests/fvkernels/mms/skewness-correction/two_term_extrapol/advection-outflow.i)
diff=1
a=1
[GlobalParams]
advected_interp_method = 'average'
[]
[Mesh]
[./gen_mesh]
type = FileMeshGenerator
file = skewed.msh
[../]
[]
[Variables]
[./v]
type = MooseVariableFVReal
face_interp_method = 'skewness-corrected'
cache_face_gradients = false
cache_face_values = true
[../]
[]
[FVKernels]
[./advection]
type = FVAdvection
variable = v
velocity = '${a} 0 0'
[../]
[./diffusion]
type = FVDiffusion
variable = v
coeff = coeff
[../]
[./body]
type = FVBodyForce
variable = v
function = 'forcing'
[../]
[]
[FVBCs]
[left]
type = FVFunctionDirichletBC
boundary = 'left'
function = 'exact'
variable = v
[]
[top]
type = FVNeumannBC
boundary = 'top'
value = 0
variable = v
[]
[bottom]
type = FVNeumannBC
boundary = 'bottom'
value = 0
variable = v
[]
[right]
type = FVConstantScalarOutflowBC
variable = v
velocity = '${a} 0 0'
boundary = 'right'
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '${diff}'
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = 'cos(x)'
[]
[forcing]
type = ParsedFunction
value = 'cos(x) - sin(x)'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_hypre_type -snes_linesearch_minlambda'
petsc_options_value = 'hypre boomeramg 1e-9'
[]
[Outputs]
exodus = true
csv = true
[]
[Postprocessors]
[./error]
type = ElementL2Error
variable = v
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[../]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(test/tests/fvkernels/fv_adapt/steady-adapt.i)
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 1
elem_type = QUAD4
[]
[]
[Variables]
[u]
order = CONSTANT
family = MONOMIAL
fv = true
type = MooseVariableFVReal
[]
[]
[Functions]
[exact]
type = ParsedFunction
value = x
[]
[]
[FVKernels]
[diff]
type = FVDiffusion
variable = u
coeff = coeff
use_point_neighbors = true
[]
[]
[FVBCs]
[right]
type = FVDirichletBC
variable = u
boundary = right
value = 1
[]
[left]
type = FVDirichletBC
variable = u
boundary = left
value = 0
[]
[]
[Materials]
[diff]
type = ADGenericFunctorMaterial
prop_names = 'coeff'
prop_values = '1'
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type'
petsc_options_value = 'hypre'
[]
[Adaptivity]
marker = box
initial_steps = 1
[Markers]
[box]
bottom_left = '0.5 0 0'
inside = refine
top_right = '1 1 0'
outside = do_nothing
type = BoxMarker
[]
[]
[]
[Outputs]
exodus = true
csv = true
[console]
type = Console
system_info = 'framework mesh aux nonlinear relationship execution'
[]
[]
[Postprocessors]
[error]
type = ElementL2Error
variable = u
function = exact
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[h]
type = AverageElementSize
outputs = 'console csv'
execute_on = 'timestep_end'
[]
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/materials/2d-transient.i)
l = 10
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_v = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 20
ny = 10
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
rho = 'rho'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = u
v = v
pressure = pressure
[]
[]
[Variables]
[u]
type = INSFVVelocityVariable
initial_condition = ${inlet_v}
[]
[v]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[]
[AuxVariables]
[velocity_norm]
type = MooseVariableFVReal
[]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = 'rho'
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = u
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = u
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = 'rho'
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = u
mu = 'mu'
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = u
momentum_component = 'x'
pressure = pressure
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = v
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = v
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = 'rho'
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = v
mu = 'mu'
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = v
momentum_component = 'y'
pressure = pressure
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T
v = power_density
[]
[]
[FVBCs]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = u
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = v
boundary = 'top bottom'
function = 0
[]
# Inlet
[inlet_u]
type = INSFVInletVelocityBC
variable = u
boundary = 'left'
function = ${inlet_v}
[]
[inlet_v]
type = INSFVInletVelocityBC
variable = v
boundary = 'left'
function = 0
[]
[inlet_T]
type = FVDirichletBC
variable = T
boundary = 'left'
value = ${inlet_temp}
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T'
rho = 'rho'
[]
[fluid_props_to_mat_props]
type = GeneralFunctorFluidProps
fp = fp
pressure = 'pressure'
T_fluid = 'T'
speed = 'velocity_norm'
# even though we provide rho from the parameters, we
# want to get rho from the fluid properties
force_define_density = true
# To initialize with a high viscosity
mu_rampdown = 'mu_rampdown'
# For porous flow
characteristic_length = 1
porosity = 1
[]
[]
[AuxKernels]
[speed]
type = VectorMagnitudeAux
variable = 'velocity_norm'
x = u
y = v
[]
[]
[Functions]
[mu_rampdown]
type = PiecewiseLinear
x = '1 2 3 4'
y = '1e3 1e2 1e1 1'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-3
optimal_iterations = 6
[]
end_time = 15
nl_abs_tol = 1e-12
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
off_diagonals_in_auto_scaling = true
compute_scaling_once = false
[]
[Outputs]
exodus = true
[]
(test/tests/materials/functor_properties/vector-magnitude/test.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 10
ny = 10
[]
[Variables]
[u]
type = MooseVariableFVReal
[]
[v]
type = MooseVariableFVReal
[]
[]
[AuxVariables]
[mag]
type = MooseVariableFVReal
[]
[]
[AuxKernels]
[mag]
type = ADFunctorElementalAux
variable = mag
functor = mat_mag
[]
[]
[FVKernels]
[v_diff]
type = FVDiffusion
variable = v
coeff = 1
[]
[u_diff]
type = FVDiffusion
variable = u
coeff = 1
[]
[]
[FVBCs]
[v_left]
type = FVDirichletBC
variable = v
boundary = 'left'
value = 0
[]
[v_right]
type = FVDirichletBC
variable = v
boundary = 'right'
value = 1
[]
[u_bottom]
type = FVDirichletBC
variable = u
boundary = 'bottom'
value = 0
[]
[u_top]
type = FVDirichletBC
variable = u
boundary = 'top'
value = 1
[]
[]
[Materials]
[functor]
type = ADVectorMagnitudeFunctorMaterial
x_functor = u
y_functor = v
vector_magnitude_name = mat_mag
[]
[]
[Executioner]
type = Steady
solve_type = 'NEWTON'
[]
[Outputs]
exodus = true
[]
(test/tests/postprocessors/interface_diffusive_flux/interface_diffusive_flux_fv.i)
postprocessor_type = InterfaceDiffusiveFluxAverage
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 6
xmax = 3
ny = 9
ymax = 3
elem_type = QUAD4
[]
[subdomain_id]
input = gen
type = SubdomainBoundingBoxGenerator
bottom_left = '0 0 0'
top_right = '2 1 0'
block_id = 1
[]
[interface]
input = subdomain_id
type = SideSetsBetweenSubdomainsGenerator
primary_block = '1'
paired_block = '0'
new_boundary = 'interface'
[]
[]
[Functions]
[fn_exact]
type = ParsedFunction
value = 'x*x+y*y'
[]
[]
[Variables]
[u]
type = MooseVariableFVReal
block = 0
[]
[v]
type = MooseVariableFVReal
block = 1
[]
[]
[FVKernels]
[diff_u]
type = FVDiffusion
variable = u
coeff = 1
[]
[body_u]
type = FVBodyForce
variable = u
function = 1
[]
[diff_v]
type = FVDiffusion
variable = v
coeff = 1
[]
[body_v]
type = FVBodyForce
variable = v
function = -1
[]
[]
[FVInterfaceKernels]
[reaction]
type = FVDiffusionInterface
variable1 = u
variable2 = v
coeff1 = 1
coeff2 = 2
boundary = 'interface'
subdomain1 = '0'
subdomain2 = '1'
[]
[]
[FVBCs]
[all]
type = FVFunctionDirichletBC
variable = u
boundary = '0 1 2 3'
function = fn_exact
[]
[]
[Postprocessors]
[diffusive_flux]
type = ${postprocessor_type}
variable = v
neighbor_variable = u
diffusivity = 1
execute_on = TIMESTEP_END
boundary = 'interface'
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
[]
[Outputs]
file_base = ${raw ${postprocessor_type} _fv}
exodus = true
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/boundary_conditions/flux_bcs_mdot.i)
rho = 'rho'
l = 10
inlet_area = 1
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_velocity = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 10
ny = 5
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = ${inlet_velocity}
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[scalar]
type = MooseVariableFVReal
initial_condition = 0.1
[]
[]
[AuxVariables]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
# Mass equation
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
# X component momentum equation
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = vel_x
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
# Y component momentum equation
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = vel_y
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
mu = ${mu}
momentum_component = 'y'
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
# Energy equation
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T_fluid
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T_fluid
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T_fluid
v = power_density
[]
# Scalar concentration equation
[scalar_time]
type = FVTimeKernel
variable = scalar
[]
[scalar_advection]
type = INSFVScalarFieldAdvection
variable = scalar
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[scalar_diffusion]
type = FVDiffusion
variable = scalar
coeff = 1.1
[]
[scalar_source]
type = FVBodyForce
variable = scalar
function = 2.1
[]
[]
[FVBCs]
# Inlet
[inlet_mass]
type = WCNSFVMassFluxBC
variable = pressure
boundary = 'left'
mdot_pp = 'inlet_mdot'
area_pp = 'area_pp_left'
rho = 'rho'
[]
[inlet_u]
type = WCNSFVMomentumFluxBC
variable = vel_x
boundary = 'left'
mdot_pp = 'inlet_mdot'
area_pp = 'area_pp_left'
rho = 'rho'
momentum_component = 'x'
[]
[inlet_v]
type = WCNSFVMomentumFluxBC
variable = vel_y
boundary = 'left'
mdot_pp = 0
area_pp = 'area_pp_left'
rho = 'rho'
momentum_component = 'y'
[]
[inlet_T]
type = WCNSFVEnergyFluxBC
variable = T_fluid
boundary = 'left'
temperature_pp = 'inlet_T'
mdot_pp = 'inlet_mdot'
area_pp = 'area_pp_left'
rho = 'rho'
cp = 'cp'
[]
[inlet_scalar]
type = WCNSFVScalarFluxBC
variable = scalar
boundary = 'left'
scalar_value_pp = 'inlet_scalar_value'
mdot_pp = 'inlet_mdot'
area_pp = 'area_pp_left'
rho = 'rho'
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
# Walls
[no_slip_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = vel_y
boundary = 'top bottom'
function = 0
[]
[]
# used for the boundary conditions in this example
[Postprocessors]
[inlet_mdot]
type = Receiver
default = ${fparse 1980 * inlet_velocity * inlet_area}
[]
[area_pp_left]
type = AreaPostprocessor
boundary = 'left'
execute_on = 'INITIAL'
[]
[inlet_T]
type = Receiver
default = ${inlet_temp}
[]
[inlet_scalar_value]
type = Receiver
default = 0.2
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k dcp_dt'
prop_values = '${cp} ${k} 0'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T_fluid
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T_fluid'
rho = ${rho}
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-2
optimal_iterations = 6
[]
end_time = 1
nl_abs_tol = 1e-9
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
[]
[Outputs]
exodus = true
execute_on = FINAL
[]
(modules/navier_stokes/test/tests/finite_volume/wcns/channel-flow/2d-transient.i)
rho = 'rho'
l = 10
velocity_interp_method = 'rc'
advected_interp_method = 'average'
# Artificial fluid properties
# For a real case, use a GeneralFluidFunctorProperties and a viscosity rampdown
# or initialize very well!
k = 1
cp = 1000
mu = 1e2
# Operating conditions
inlet_temp = 300
outlet_pressure = 1e5
inlet_v = 0.001
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = ${l}
ymin = 0
ymax = 1
nx = 20
ny = 10
[]
[]
[GlobalParams]
rhie_chow_user_object = 'rc'
[]
[UserObjects]
[rc]
type = INSFVRhieChowInterpolator
u = vel_x
v = vel_y
pressure = pressure
[]
[]
[Variables]
[vel_x]
type = INSFVVelocityVariable
initial_condition = ${inlet_v}
[]
[vel_y]
type = INSFVVelocityVariable
initial_condition = 1e-15
[]
[pressure]
type = INSFVPressureVariable
initial_condition = ${outlet_pressure}
[]
[T_fluid]
type = INSFVEnergyVariable
initial_condition = ${inlet_temp}
[]
[]
[AuxVariables]
[mixing_length]
type = MooseVariableFVReal
[]
[power_density]
type = MooseVariableFVReal
initial_condition = 1e4
[]
[]
[FVKernels]
inactive = 'u_turb v_turb temp_turb'
[mass_time]
type = WCNSFVMassTimeDerivative
variable = pressure
drho_dt = drho_dt
[]
[mass]
type = INSFVMassAdvection
variable = pressure
advected_interp_method = ${advected_interp_method}
velocity_interp_method = ${velocity_interp_method}
rho = ${rho}
[]
[u_time]
type = WCNSFVMomentumTimeDerivative
variable = vel_x
drho_dt = drho_dt
rho = rho
momentum_component = 'x'
[]
[u_advection]
type = INSFVMomentumAdvection
variable = vel_x
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'x'
[]
[u_viscosity]
type = INSFVMomentumDiffusion
variable = vel_x
mu = ${mu}
momentum_component = 'x'
[]
[u_pressure]
type = INSFVMomentumPressure
variable = vel_x
momentum_component = 'x'
pressure = pressure
[]
[u_turb]
type = INSFVMixingLengthReynoldsStress
variable = vel_x
rho = ${rho}
mixing_length = 'mixing_length'
momentum_component = 'x'
u = vel_x
v = vel_y
[]
[v_time]
type = WCNSFVMomentumTimeDerivative
variable = vel_y
drho_dt = drho_dt
rho = rho
momentum_component = 'y'
[]
[v_advection]
type = INSFVMomentumAdvection
variable = vel_y
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
rho = ${rho}
momentum_component = 'y'
[]
[v_viscosity]
type = INSFVMomentumDiffusion
variable = vel_y
momentum_component = 'y'
mu = ${mu}
[]
[v_pressure]
type = INSFVMomentumPressure
variable = vel_y
momentum_component = 'y'
pressure = pressure
[]
[v_turb]
type = INSFVMixingLengthReynoldsStress
variable = vel_y
rho = ${rho}
mixing_length = 'mixing_length'
momentum_component = 'y'
u = vel_x
v = vel_y
[]
[temp_time]
type = WCNSFVEnergyTimeDerivative
variable = T_fluid
cp = cp
rho = rho
drho_dt = drho_dt
dcp_dt = dcp_dt
[]
[temp_conduction]
type = FVDiffusion
coeff = 'k'
variable = T_fluid
[]
[temp_advection]
type = INSFVEnergyAdvection
variable = T_fluid
velocity_interp_method = ${velocity_interp_method}
advected_interp_method = ${advected_interp_method}
[]
[heat_source]
type = FVCoupledForce
variable = T_fluid
v = power_density
[]
[temp_turb]
type = WCNSFVMixingLengthEnergyDiffusion
variable = T_fluid
rho = rho
cp = cp
mixing_length = 'mixing_length'
schmidt_number = 1
u = vel_x
v = vel_y
[]
[]
[FVBCs]
[no_slip_x]
type = INSFVNoSlipWallBC
variable = vel_x
boundary = 'top bottom'
function = 0
[]
[no_slip_y]
type = INSFVNoSlipWallBC
variable = vel_y
boundary = 'top bottom'
function = 0
[]
# Inlet
[inlet_u]
type = INSFVInletVelocityBC
variable = vel_x
boundary = 'left'
function = ${inlet_v}
[]
[inlet_v]
type = INSFVInletVelocityBC
variable = vel_y
boundary = 'left'
function = 0
[]
[inlet_T]
type = FVDirichletBC
variable = T_fluid
boundary = 'left'
value = ${inlet_temp}
[]
[outlet_p]
type = INSFVOutletPressureBC
variable = pressure
boundary = 'right'
function = ${outlet_pressure}
[]
[]
[Modules]
[FluidProperties]
[fp]
type = FlibeFluidProperties
[]
[]
[]
[Materials]
[const_functor]
type = ADGenericFunctorMaterial
prop_names = 'cp k dcp_dt'
prop_values = '${cp} ${k} 0'
[]
[rho]
type = RhoFromPTFunctorMaterial
fp = fp
temperature = T_fluid
pressure = pressure
[]
[ins_fv]
type = INSFVEnthalpyMaterial
temperature = 'T_fluid'
rho = ${rho}
[]
[]
[AuxKernels]
inactive = 'mixing_len'
[mixing_len]
type = WallDistanceMixingLengthAux
walls = 'top'
variable = mixing_length
execute_on = 'initial'
delta = 0.5
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = 'lu NONZERO'
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e-3
optimal_iterations = 6
[]
end_time = 15
nl_abs_tol = 1e-9
nl_max_its = 50
line_search = 'none'
automatic_scaling = true
off_diagonals_in_auto_scaling = true
compute_scaling_once = false
[]
[Outputs]
exodus = true
[]