- primary_boundaryThe name of the primary boundary sideset.
C++ Type:BoundaryName
Controllable:No
Description:The name of the primary boundary sideset.
- primary_subdomainThe name of the primary subdomain.
C++ Type:SubdomainName
Controllable:No
Description:The name of the primary subdomain.
- secondary_boundaryThe name of the secondary boundary sideset.
C++ Type:BoundaryName
Controllable:No
Description:The name of the secondary boundary sideset.
- secondary_subdomainThe name of the secondary subdomain.
C++ Type:SubdomainName
Controllable:No
Description:The name of the secondary subdomain.
Modular Gap Conductance Constraint
Computes the residual and Jacobian contributions for the 'Lagrange Multiplier' implementation of the thermal contact problem. For more information, see the detailed description here: http://tinyurl.com/gmmhbe9
The ModularGapConductanceConstraint class is used specify a heat flux across a gap. The flux is computed by user objects derived from GapFluxModelBase. Such as
Multiple models can be specified with their contributions getting summed up.
Input Parameters
- compute_lm_residualsTrueWhether to compute Lagrange Multiplier residuals
Default:True
C++ Type:bool
Controllable:No
Description:Whether to compute Lagrange Multiplier residuals
- compute_primal_residualsTrueWhether to compute residuals for the primal variable.
Default:True
C++ Type:bool
Controllable:No
Description:Whether to compute residuals for the primal variable.
- correct_edge_droppingFalseWhether to enable correct edge dropping treatment for mortar constraints. When disabled any Lagrange Multiplier degree of freedom on a secondary element without full primary contributions will be set (strongly) to 0.
Default:False
C++ Type:bool
Controllable:No
Description:Whether to enable correct edge dropping treatment for mortar constraints. When disabled any Lagrange Multiplier degree of freedom on a secondary element without full primary contributions will be set (strongly) to 0.
- cylinder_axis_point_1Start point for line defining cylindrical axis
C++ Type:libMesh::VectorValue<double>
Controllable:No
Description:Start point for line defining cylindrical axis
- cylinder_axis_point_2End point for line defining cylindrical axis
C++ Type:libMesh::VectorValue<double>
Controllable:No
Description:End point for line defining cylindrical axis
- debug_meshFalseWhether this constraint is going to enable mortar segment mesh debug information. An exodusfile will be generated if the user sets this flag to true
Default:False
C++ Type:bool
Controllable:No
Description:Whether this constraint is going to enable mortar segment mesh debug information. An exodusfile will be generated if the user sets this flag to true
- displacementsDisplacement variables
C++ Type:std::vector<VariableName>
Controllable:No
Description:Displacement variables
- gap_flux_modelsList of GapFluxModel user objects
C++ Type:std::vector<UserObjectName>
Controllable:No
Description:List of GapFluxModel user objects
- gap_geometry_typePLATEGap calculation type. The geometry type is used to compute gap distances and scale fluxes to ensure energy balance.
Default:PLATE
C++ Type:MooseEnum
Options:PLATE, CYLINDER, SPHERE
Controllable:No
Description:Gap calculation type. The geometry type is used to compute gap distances and scale fluxes to ensure energy balance.
- ghost_point_neighborsFalseWhether we should ghost point neighbors of secondary face elements, and consequently also their mortar interface couples.
Default:False
C++ Type:bool
Controllable:No
Description:Whether we should ghost point neighbors of secondary face elements, and consequently also their mortar interface couples.
- interpolate_normalsTrueWhether to interpolate the nodal normals (e.g. classic idea of evaluating field at quadrature points). If this is set to false, then non-interpolated nodal normals will be used, and then the _normals member should be indexed with _i instead of _qp
Default:True
C++ Type:bool
Controllable:No
Description:Whether to interpolate the nodal normals (e.g. classic idea of evaluating field at quadrature points). If this is set to false, then non-interpolated nodal normals will be used, and then the _normals member should be indexed with _i instead of _qp
- max_gap1e+06A maximum gap size
Default:1e+06
C++ Type:double
Controllable:No
Description:A maximum gap size
- periodicFalseWhether this constraint is going to be used to enforce a periodic condition. This has the effect of changing the normals vector for projection from outward to inward facing
Default:False
C++ Type:bool
Controllable:No
Description:Whether this constraint is going to be used to enforce a periodic condition. This has the effect of changing the normals vector for projection from outward to inward facing
- primary_variablePrimal variable on primary surface. If this parameter is not provided then the primary variable will be initialized to the secondary variable
C++ Type:VariableName
Controllable:No
Description:Primal variable on primary surface. If this parameter is not provided then the primary variable will be initialized to the secondary variable
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- quadratureDEFAULTQuadrature rule to use on mortar segments. For 2D mortar DEFAULT is recommended. For 3D mortar, QUAD meshes are integrated using triangle mortar segments. While DEFAULT quadrature order is typically sufficiently accurate, exact integration of QUAD mortar faces requires SECOND order quadrature for FIRST variables and FOURTH order quadrature for SECOND order variables.
Default:DEFAULT
C++ Type:MooseEnum
Options:DEFAULT, FIRST, SECOND, THIRD, FOURTH
Controllable:No
Description:Quadrature rule to use on mortar segments. For 2D mortar DEFAULT is recommended. For 3D mortar, QUAD meshes are integrated using triangle mortar segments. While DEFAULT quadrature order is typically sufficiently accurate, exact integration of QUAD mortar faces requires SECOND order quadrature for FIRST variables and FOURTH order quadrature for SECOND order variables.
- secondary_variablePrimal variable on secondary surface.
C++ Type:VariableName
Controllable:No
Description:Primal variable on secondary surface.
- sphere_originOrigin for sphere geometry
C++ Type:libMesh::VectorValue<double>
Controllable:No
Description:Origin for sphere geometry
- variableThe name of the lagrange multiplier variable that this constraint is applied to. This parameter may not be supplied in the case of using penalty methods for example
C++ Type:NonlinearVariableName
Controllable:No
Description:The name of the lagrange multiplier variable that this constraint is applied to. This parameter may not be supplied in the case of using penalty methods for example
Optional Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Tagging Parameters
Input Files
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/gap_heat_transfer_sphere3D_mortar.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/closed_gap_thermomechanical_mortar_contact.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_radiation.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/open_gap_pressure_dependent.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/gap_heat_transfer_radiation_test.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_radiation_conduction.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/multi_component_mortar_thermal_conduction.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/gap_heat_transfer_3D_mortar.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_sphere_mortar_error.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_conduction_function.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_cylinder_mortar_error.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_conduction.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_cylinder_mortar.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/varied_pressure_thermomechanical_mortar.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_rz_cylinder_mortar.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/closed_gap_pressure_dependent_thermal_contact.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_sphere_mortar.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_radiation_conduction_separate.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar/closed_gap_prescribed_pressure.i)
- (modules/heat_conduction/test/tests/gap_heat_transfer_mortar_action/modular_gap_heat_transfer_mortar_displaced_radiation_conduction_verbose.i)
References
No citations exist within this document.(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/gap_heat_transfer_sphere3D_mortar.i)
sphere_outer_htc = 10 # W/m^2/K
sphere_outer_Tinf = 300 # K
[GlobalParams]
order = SECOND
family = LAGRANGE
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Mesh]
[file]
type = FileMeshGenerator
file = sphere3D.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
[]
[Functions]
[temp]
type = PiecewiseLinear
x = '0 1'
y = '100 200'
[]
[]
[Variables]
[temp]
initial_condition = 500
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[AuxVariables]
# [gap_conductance]
# order = CONSTANT
# family = MONOMIAL
# []
[power_density]
block = 'fuel'
initial_condition = 50e3
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temp
block = '1 2'
[]
[heat_source]
type = CoupledForce
variable = temp
block = 'fuel'
v = power_density
[]
[]
# [AuxKernels]
# [gap_cond]
# type = MaterialRealAux
# property = gap_conductance
# variable = gap_conductance
# boundary = 2
# []
# []
[Materials]
[heat1]
type = HeatConductionMaterial
block = '1 2'
specific_heat = 1.0
thermal_conductivity = 34.6
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
T = temp
boundary = 2
primary_emissivity = 0.0
secondary_emissivity = 0.0
[]
[conduction]
type = GapFluxModelConduction
T = temp
boundary = 2
gap_conductivity = 5.0
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
primary_boundary = 3
primary_subdomain = 10000
secondary_boundary = 2
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = SPHERE
sphere_origin = '0 0 0'
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = temp
boundary = '4' # outer RPV
coefficient = ${sphere_outer_htc}
T_infinity = ${sphere_outer_Tinf}
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
dt = 1
dtmin = 0.01
end_time = 1
nl_rel_tol = 1e-12
nl_abs_tol = 1e-7
[]
[Outputs]
exodus = true
csv = true
[Console]
type = Console
[]
[]
[Postprocessors]
[temp_left]
type = SideAverageValue
boundary = 2
variable = temp
[]
[temp_right]
type = SideAverageValue
boundary = 3
variable = temp
[]
[flux_left]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 2
diffusivity = thermal_conductivity
[]
[flux_right]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 3
diffusivity = thermal_conductivity
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = 'fuel'
[]
[sphere_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = temp
boundary = '4' # outer RVP
T_fluid = ${sphere_outer_Tinf}
htc = ${sphere_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(sphere_convective_out - ptot) / ptot'
pp_names = 'sphere_convective_out ptot'
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '2 3'
variable = temp
[]
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/closed_gap_thermomechanical_mortar_contact.i)
## Units in the input file: m-Pa-s-K
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[left_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmax = 1
ymin = 0
ymax = 0.5
boundary_name_prefix = moving_block
[]
[left_block]
type = SubdomainIDGenerator
input = left_rectangle
subdomain_id = 1
[]
[right_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmin = 1
xmax = 2
ymin = 0
ymax = 0.5
boundary_name_prefix = fixed_block
boundary_id_offset = 4
[]
[right_block]
type = SubdomainIDGenerator
input = right_rectangle
subdomain_id = 2
[]
[two_blocks]
type = MeshCollectionGenerator
inputs = 'left_block right_block'
[]
[block_rename]
type = RenameBlockGenerator
input = two_blocks
old_block = '1 2'
new_block = 'left_block right_block'
[]
patch_update_strategy = iteration
[]
[Variables]
[disp_x]
block = 'left_block right_block'
[]
[disp_y]
block = 'left_block right_block'
[]
[temperature]
initial_condition = 300.0
[]
[temperature_interface_lm]
block = 'interface_secondary_subdomain'
[]
[]
[Modules]
[TensorMechanics/Master]
[steel]
strain = FINITE
add_variables = false
use_automatic_differentiation = true
generate_output = 'strain_xx strain_xy strain_yy stress_xx stress_xy stress_yy'
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
eigenstrain_names = steel_thermal_expansion
block = 'left_block'
[]
[aluminum]
strain = FINITE
add_variables = false
use_automatic_differentiation = true
generate_output = 'strain_xx strain_xy strain_yy stress_xx stress_xy stress_yy'
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
eigenstrain_names = aluminum_thermal_expansion
block = 'right_block'
[]
[]
[]
[Kernels]
[HeatDiff_steel]
type = ADHeatConduction
variable = temperature
thermal_conductivity = steel_thermal_conductivity
block = 'left_block'
[]
[HeatTdot_steel]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = steel_heat_capacity
density_name = steel_density
block = 'left_block'
[]
[HeatDiff_aluminum]
type = ADHeatConduction
variable = temperature
thermal_conductivity = aluminum_thermal_conductivity
block = 'right_block'
[]
[HeatTdot_aluminum]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = aluminum_heat_capacity
density_name = aluminum_density
block = 'right_block'
[]
[]
[BCs]
[fixed_bottom_edge]
type = ADDirichletBC
variable = disp_y
value = 0
boundary = 'moving_block_bottom fixed_block_bottom'
[]
[fixed_outer_edge]
type = ADDirichletBC
variable = disp_x
value = 0
boundary = 'fixed_block_right'
[]
[displacement_left_block]
type = ADFunctionDirichletBC
variable = disp_x
function = '2.0e-7*t'
boundary = 'moving_block_left'
[]
[temperature_left]
type = ADDirichletBC
variable = temperature
value = 300
boundary = 'moving_block_left'
[]
[temperature_right]
type = ADDirichletBC
variable = temperature
value = 800
boundary = 'fixed_block_right'
[]
[]
[Contact]
[interface]
primary = moving_block_right
secondary = fixed_block_left
model = frictionless
formulation = mortar
correct_edge_dropping = true
[]
[]
[Constraints]
[thermal_contact]
type = ModularGapConductanceConstraint
variable = temperature_interface_lm
secondary_variable = temperature
primary_boundary = moving_block_right
primary_subdomain = interface_primary_subdomain
secondary_boundary = fixed_block_left
secondary_subdomain = interface_secondary_subdomain
gap_flux_models = 'closed'
use_displaced_mesh = true
[]
[]
[Materials]
[steel_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 1.93e11 #in Pa, 193 GPa, stainless steel 304
poissons_ratio = 0.29
block = 'left_block'
[]
[steel_stress]
type = ADComputeFiniteStrainElasticStress
block = 'left_block'
[]
[steel_thermal_expansion]
type = ADComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 17.3e-6 # stainless steel 304
stress_free_temperature = 300.0
temperature = temperature
eigenstrain_name = 'steel_thermal_expansion'
block = 'left_block'
[]
[steel_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'steel_density steel_thermal_conductivity steel_heat_capacity steel_hardness'
prop_values = ' 8e3 16.2 0.5 129' ## for stainless steel 304
block = 'left_block'
[]
[aluminum_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 6.8e10 #in Pa, 68 GPa, aluminum
poissons_ratio = 0.36
block = 'right_block'
[]
[aluminum_stress]
type = ADComputeFiniteStrainElasticStress
block = 'right_block'
[]
[aluminum_thermal_expansion]
type = ADComputeThermalExpansionEigenstrain
thermal_expansion_coeff = 24.0e-6 # aluminum
stress_free_temperature = 300.0
temperature = temperature
eigenstrain_name = 'aluminum_thermal_expansion'
block = 'right_block'
[]
[aluminum_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'aluminum_density aluminum_thermal_conductivity aluminum_heat_capacity aluminum_hardness'
prop_values = ' 2.7e3 210 0.9 15' #for 99% pure Al
block = 'right_block'
[]
[]
[UserObjects]
[closed]
type = GapFluxModelPressureDependentConduction
primary_conductivity = steel_thermal_conductivity
secondary_conductivity = aluminum_thermal_conductivity
temperature = temperature
contact_pressure = interface_normal_lm
primary_hardness = steel_hardness
secondary_hardness = aluminum_hardness
boundary = moving_block_right
[]
[]
[Postprocessors]
[steel_pt_interface_temperature]
type = NodalVariableValue
nodeid = 245
variable = temperature
[]
[aluminum_pt_interface_temperature]
type = NodalVariableValue
nodeid = 657
variable = temperature
[]
[steel_element_interface_stress]
type = ElementalVariableValue
variable = vonmises_stress
elementid = 199
[]
[aluminum_element_interface_stress]
type = ElementalVariableValue
variable = vonmises_stress
elementid = 560
[]
[interface_heat_flux_steel]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = moving_block_right
diffusivity = steel_thermal_conductivity
[]
[interface_heat_flux_aluminum]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = fixed_block_left
diffusivity = aluminum_thermal_conductivity
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
automatic_scaling = false
line_search = 'none'
# mortar contact solver options
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = ' lu superlu_dist'
snesmf_reuse_base = false
nl_rel_tol = 1e-8
nl_max_its = 20
l_max_its = 50
dt = 2
end_time = 10
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_radiation.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 0.01
specific_heat = 1
[]
[right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 0.005
specific_heat = 1
[]
[]
[Kernels]
[hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[]
[hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = temp
boundary = 100
primary_emissivity = 1.0
secondary_emissivity = 1.0
use_displaced_mesh = true
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = radiation
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 100
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
nl_abs_tol = 1.0e-10
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '100 101'
variable = 'temp'
[]
[]
[Outputs]
exodus = false
csv = true
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/open_gap_pressure_dependent.i)
## Units in the input file: m-Pa-s-K
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[left_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmax = 1
ymin = 0
ymax = 0.5
boundary_name_prefix = moving_block
[]
[left_block]
type = SubdomainIDGenerator
input = left_rectangle
subdomain_id = 1
[]
[right_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmin = 1.0001
xmax = 2.0001
ymin = 0
ymax = 0.5
boundary_name_prefix = fixed_block
boundary_id_offset = 4
[]
[right_block]
type = SubdomainIDGenerator
input = right_rectangle
subdomain_id = 2
[]
[two_blocks]
type = MeshCollectionGenerator
inputs = 'left_block right_block'
[]
[block_rename]
type = RenameBlockGenerator
input = two_blocks
old_block = '1 2'
new_block = 'left_block right_block'
[]
[]
[Variables]
[disp_x]
block = 'left_block right_block'
[]
[disp_y]
block = 'left_block right_block'
[]
[temperature]
initial_condition = 525.0
[]
[temperature_interface_lm]
block = 'interface_secondary_subdomain'
[]
[]
[Modules]
[TensorMechanics/Master]
[steel]
strain = SMALL
add_variables = false
use_automatic_differentiation = true
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'left_block'
[]
[aluminum]
strain = SMALL
add_variables = false
use_automatic_differentiation = true
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'right_block'
[]
[]
[]
[Kernels]
[HeatDiff_steel]
type = ADHeatConduction
variable = temperature
thermal_conductivity = steel_thermal_conductivity
block = 'left_block'
[]
[HeatDiff_aluminum]
type = ADHeatConduction
variable = temperature
thermal_conductivity = aluminum_thermal_conductivity
block = 'right_block'
[]
[]
[BCs]
[fixed_bottom_edge]
type = ADDirichletBC
variable = disp_y
value = 0
boundary = 'moving_block_bottom fixed_block_bottom'
[]
[fixed_outer_edge]
type = ADDirichletBC
variable = disp_x
value = 0
boundary = 'fixed_block_right'
[]
[pressure_left_block]
type = ADPressure
variable = disp_x
boundary = 'moving_block_left'
component = 0
function = 1*t
[]
[temperature_left]
type = ADDirichletBC
variable = temperature
value = 800
boundary = 'moving_block_left'
[]
[temperature_right]
type = ADDirichletBC
variable = temperature
value = 250
boundary = 'fixed_block_right'
[]
[]
[Contact]
[interface]
primary = moving_block_right
secondary = fixed_block_left
model = frictionless
formulation = mortar
correct_edge_dropping = true
[]
[]
[Constraints]
[thermal_contact]
type = ModularGapConductanceConstraint
variable = temperature_interface_lm
secondary_variable = temperature
primary_boundary = moving_block_right
primary_subdomain = interface_primary_subdomain
secondary_boundary = fixed_block_left
secondary_subdomain = interface_secondary_subdomain
gap_flux_models = 'closed'
use_displaced_mesh = true
[]
[]
[Materials]
[steel_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 1.93e11 #in Pa, 193 GPa, stainless steel 304
poissons_ratio = 0.29
block = 'left_block'
[]
[steel_stress]
type = ADComputeLinearElasticStress
block = 'left_block'
[]
[steel_density]
type = ADGenericConstantMaterial
prop_names = 'steel_density'
prop_values = 8e3 #in kg/m^3, stainless steel 304
block = 'left_block'
[]
[steel_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'steel_thermal_conductivity steel_heat_capacity steel_emissivity'
prop_values = '16.2 0.5 0.6' ## for stainless steel 304
block = 'left_block'
[]
[aluminum_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 6.8e10 #in Pa, 68 GPa, aluminum
poissons_ratio = 0.36
block = 'right_block'
[]
[aluminum_stress]
type = ADComputeLinearElasticStress
block = 'right_block'
[]
[aluminum_density]
type = ADGenericConstantMaterial
prop_names = 'aluminum_density'
prop_values = 2.7e3 #in kg/m^3, stainless steel 304
block = 'right_block'
[]
[aluminum_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'aluminum_thermal_conductivity aluminum_heat_capacity aluminum_emissivity'
prop_values = '210 0.9 0.25'
block = 'right_block'
[]
[]
[UserObjects]
[closed]
type = GapFluxModelPressureDependentConduction
primary_conductivity = steel_thermal_conductivity
secondary_conductivity = aluminum_thermal_conductivity
temperature = temperature
primary_hardness = 1.0
secondary_hardness = 1.0
boundary = moving_block_right
contact_pressure = interface_normal_lm
[]
[]
[Postprocessors]
[steel_pt_interface_temperature]
type = NodalVariableValue
nodeid = 245
variable = temperature
[]
[aluminum_pt_interface_temperature]
type = NodalVariableValue
nodeid = 657
variable = temperature
[]
[interface_heat_flux_steel]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = moving_block_right
diffusivity = steel_thermal_conductivity
[]
[interface_heat_flux_aluminum]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = fixed_block_left
diffusivity = aluminum_thermal_conductivity
[]
[steel_element_interface_stress]
type = ElementalVariableValue
variable = vonmises_stress
elementid = 199
[]
[aluminum_element_interface_stress]
type = ElementalVariableValue
variable = vonmises_stress
elementid = 560
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
automatic_scaling = false
line_search = 'none'
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/gap_heat_transfer_radiation_test.i)
#
# This test replicates the legacy heat transfter test
# gap_heat_transfer_radiation/gap_heat_transfer_radiation_test.i
# The flux post processors give 3.753945e+01
#
[Mesh]
[file]
type = FileMeshGenerator
file = gap_heat_transfer_radiation_test.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = '200'
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = '300'
new_block_name = 'primary_lower'
input = secondary
[]
[]
[Functions]
[temp]
type = PiecewiseLinear
x = '0 1'
y = '200 200'
[]
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
initial_condition = 100
scaling = 1e-8
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
scaling = 1e-1
[]
[]
[Kernels]
[heat]
type = HeatConduction
variable = temp
block = '1 2'
[]
[]
[BCs]
[temp_far_left]
type = FunctionDirichletBC
boundary = 1
variable = temp
function = temp
[]
[temp_far_right]
type = DirichletBC
boundary = 4
variable = temp
value = 100
[]
[]
[UserObjects]
[radiative]
type = GapFluxModelRadiative
secondary_emissivity = 0.5
primary_emissivity = 0.5
temperature = temp
boundary = 3
[]
[simple]
type = GapFluxModelSimple
k = 0.09187557
temperature = temp
boundary = 3
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
primary_boundary = 3
primary_subdomain = 300
secondary_boundary = 2
secondary_subdomain = 200
gap_flux_models = 'simple radiative'
[]
[]
[Materials]
[heat1]
type = HeatConductionMaterial
block = '1 2'
specific_heat = 1.0
thermal_conductivity = 10000000.0
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '1.0'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
end_time = 1.0
[]
[Postprocessors]
[temp_left]
type = SideAverageValue
boundary = 2
variable = temp
execute_on = 'initial timestep_end'
[]
[temp_right]
type = SideAverageValue
boundary = 3
variable = temp
execute_on = 'initial timestep_end'
[]
[flux_left]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 2
diffusivity = thermal_conductivity
[]
[flux_right]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 3
diffusivity = thermal_conductivity
[]
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_radiation_conduction.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 0.01
specific_heat = 1
[]
[right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 0.005
specific_heat = 1
[]
[]
[Kernels]
[hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[]
[hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = temp
boundary = 100
primary_emissivity = 1.0
secondary_emissivity = 1.0
use_displaced_mesh = true
[]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 100
gap_conductivity = 0.02
use_displaced_mesh = true
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 100
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
nl_abs_tol = 1.0e-10
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '100 101'
variable = 'temp'
[]
[]
[Outputs]
exodus = false
csv = true
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/multi_component_mortar_thermal_conduction.i)
## Units in the input file: m-Pa-s-K
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[left_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmax = 1
ymin = 0
ymax = 0.5
boundary_name_prefix = moving_block
[]
[left_block]
type = SubdomainIDGenerator
input = left_rectangle
subdomain_id = 1
[]
[right_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmin = 1.
xmax = 2.
ymin = 0
ymax = 0.5
boundary_name_prefix = fixed_block
boundary_id_offset = 4
[]
[right_block]
type = SubdomainIDGenerator
input = right_rectangle
subdomain_id = 2
[]
[two_blocks]
type = MeshCollectionGenerator
inputs = 'left_block right_block'
[]
[block_rename]
type = RenameBlockGenerator
input = two_blocks
old_block = '1 2'
new_block = 'left_block right_block'
[]
patch_update_strategy = iteration
[]
[Variables]
[disp_x]
block = 'left_block right_block'
[]
[disp_y]
block = 'left_block right_block'
[]
[temperature]
initial_condition = 525.0
[]
[temperature_interface_lm]
block = 'interface_secondary_subdomain'
[]
[]
[Modules]
[TensorMechanics/Master]
[steel]
strain = SMALL
add_variables = false
use_automatic_differentiation = true
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'left_block'
[]
[aluminum]
strain = SMALL
add_variables = false
use_automatic_differentiation = true
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'right_block'
[]
[]
[]
[Kernels]
[HeatDiff_steel]
type = ADHeatConduction
variable = temperature
thermal_conductivity = steel_thermal_conductivity
block = 'left_block'
[]
[HeatTdot_steel]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = steel_heat_capacity
density_name = steel_density
block = 'left_block'
[]
[HeatDiff_aluminum]
type = ADHeatConduction
variable = temperature
thermal_conductivity = aluminum_thermal_conductivity
block = 'right_block'
[]
[HeatTdot_aluminum]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = aluminum_heat_capacity
density_name = aluminum_density
block = 'right_block'
[]
[]
[BCs]
[fixed_bottom_edge]
type = ADDirichletBC
variable = disp_y
value = 0
boundary = 'moving_block_bottom fixed_block_bottom'
[]
[fixed_outer_edge]
type = ADDirichletBC
variable = disp_x
value = 0
boundary = 'fixed_block_right'
[]
[displacement_left_block]
type = ADFunctionDirichletBC
variable = disp_x
function = 'if(t<61, 2.0e-7, -2.0e-8*(t-60))'
boundary = 'moving_block_left'
[]
[temperature_left]
type = ADDirichletBC
variable = temperature
value = 800
boundary = 'moving_block_left'
[]
[temperature_right]
type = ADDirichletBC
variable = temperature
value = 250
boundary = 'fixed_block_right'
[]
[]
[Contact]
[interface]
primary = moving_block_right
secondary = fixed_block_left
model = frictionless
formulation = mortar
correct_edge_dropping = true
[]
[]
[Constraints]
[thermal_contact]
type = ModularGapConductanceConstraint
variable = temperature_interface_lm
secondary_variable = temperature
primary_boundary = moving_block_right
primary_subdomain = interface_primary_subdomain
secondary_boundary = fixed_block_left
secondary_subdomain = interface_secondary_subdomain
gap_flux_models = 'radiation closed'
use_displaced_mesh = true
[]
[]
[Materials]
[steel_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 1.93e11 #in Pa, 193 GPa, stainless steel 304
poissons_ratio = 0.29
block = 'left_block'
[]
[steel_stress]
type = ADComputeLinearElasticStress
block = 'left_block'
[]
[steel_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'steel_density steel_thermal_conductivity steel_heat_capacity'
prop_values = ' 8e3 16.2 0.5' ## for stainless steel 304
block = 'left_block'
[]
[aluminum_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 6.8e10 #in Pa, 68 GPa, aluminum
poissons_ratio = 0.36
block = 'right_block'
[]
[aluminum_stress]
type = ADComputeLinearElasticStress
block = 'right_block'
[]
[aluminum_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'aluminum_density aluminum_thermal_conductivity aluminum_heat_capacity'
prop_values = ' 2.7e3 210 0.9'
block = 'right_block'
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
secondary_emissivity = 0.25
primary_emissivity = 0.6
temperature = temperature
boundary = moving_block_right
[]
[closed]
type = GapFluxModelPressureDependentConduction
primary_conductivity = steel_thermal_conductivity
secondary_conductivity = aluminum_thermal_conductivity
temperature = temperature
contact_pressure = interface_normal_lm
primary_hardness = 1.0
secondary_hardness = 1.0
boundary = moving_block_right
[]
[]
[Postprocessors]
[steel_pt_interface_temperature]
type = NodalVariableValue
nodeid = 245
variable = temperature
[]
[aluminum_pt_interface_temperature]
type = NodalVariableValue
nodeid = 657
variable = temperature
[]
[aluminum_element_interface_stress]
type = ElementalVariableValue
variable = vonmises_stress
elementid = 560
[]
[interface_heat_flux_steel]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = moving_block_right
diffusivity = steel_thermal_conductivity
[]
[interface_heat_flux_aluminum]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = fixed_block_left
diffusivity = aluminum_thermal_conductivity
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
automatic_scaling = false
line_search = 'none'
# mortar contact solver options
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = ' lu superlu_dist'
snesmf_reuse_base = false
nl_rel_tol = 1e-10
nl_max_its = 20
l_max_its = 50
dt = 60
end_time = 120
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/gap_heat_transfer_3D_mortar.i)
outer_htc = 10 # W/m^2/K
outer_Tinf = 300 # K
[GlobalParams]
order = SECOND
family = LAGRANGE
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 6
nz = 6
xmin = -1
xmax = -0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX27
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'left_bottom left_back left_right left_front left_left left_top'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 3
nx = 4
ny = 8
nz = 8
xmin = 0.5
xmax = 1
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX27
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3 4 5'
# new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
new_boundary = '100 101 102 103 104 105'
[]
[right_block_sidesets_rename]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '100 101 102 103 104 105'
new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets_rename
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = 'left_right'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = 'right_left'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Functions]
[temp]
type = PiecewiseLinear
x = '0 1'
y = '100 200'
[]
[]
[Variables]
[temp]
initial_condition = 500
[]
[lm]
order = SECOND
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[AuxVariables]
[power_density]
block = 1
initial_condition = 50e3
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temp
block = '1 2'
[]
[heat_source]
type = CoupledForce
variable = temp
block = '1'
v = power_density
[]
[]
[Materials]
[heat1]
type = HeatConductionMaterial
block = '1 2'
specific_heat = 1.0
thermal_conductivity = 34.6
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
T = temp
boundary = 'left_right'
primary_emissivity = 0.0
secondary_emissivity = 0.0
[]
[conduction]
type = GapFluxModelConduction
T = temp
boundary = 'left_right'
gap_conductivity = 5.0
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
primary_boundary = 'right_left'
primary_subdomain = 'primary_lower'
secondary_boundary = 'left_right'
secondary_subdomain = 'secondary_lower'
gap_flux_models = 'radiation conduction'
gap_geometry_type = PLATE
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = temp
boundary = 'right_right' # outer RPV
coefficient = ${outer_htc}
T_infinity = ${outer_Tinf}
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
dt = 1
dtmin = 0.01
end_time = 1
nl_rel_tol = 1e-12
nl_abs_tol = 1e-8
[]
[Outputs]
exodus = true
csv = true
[Console]
type = Console
[]
[]
[Postprocessors]
[temp_left]
type = SideAverageValue
boundary = 'left_right'
variable = temp
[]
[temp_right]
type = SideAverageValue
boundary = 'right_left'
variable = temp
[]
[flux_left]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 'left_right'
diffusivity = thermal_conductivity
[]
[flux_right]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 'right_left'
diffusivity = thermal_conductivity
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = 1
[]
[convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = temp
boundary = 'right_right' # outer RVP
T_fluid = ${outer_Tinf}
htc = ${outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(convective_out - ptot) / ptot'
pp_names = 'convective_out ptot'
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = 'left_right right_left'
variable = temp
[]
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_sphere_mortar_error.i)
sphere_outer_htc = 10 # W/m^2/K
sphere_outer_Tinf = 300 # K
[GlobalParams]
order = SECOND
family = LAGRANGE
[]
[Problem]
coord_type = RZ
kernel_coverage_check = false
material_coverage_check = false
[]
[Mesh]
[file]
type = FileMeshGenerator
file = cyl2D.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Functions]
[temp]
type = PiecewiseLinear
x = '0 1'
y = '100 200'
[]
[]
[Variables]
[temp]
initial_condition = 500
[]
[lm]
order = SECOND
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[AuxVariables]
[power_density]
block = 'fuel'
initial_condition = 50e3
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temp
block = '1 2'
[]
[heat_source]
type = CoupledForce
variable = temp
block = 'fuel'
v = power_density
[]
[]
[Materials]
[heat1]
type = HeatConductionMaterial
block = '1 2'
specific_heat = 1.0
thermal_conductivity = 34.6
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = temp
boundary = 2
primary_emissivity = 0.0
secondary_emissivity = 0.0
[]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 2
gap_conductivity = 5.0
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
primary_boundary = 3
primary_subdomain = 10000
secondary_boundary = 2
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = SPHERE
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = temp
boundary = '4' # outer RPV
coefficient = ${sphere_outer_htc}
T_infinity = ${sphere_outer_Tinf}
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
dt = 1
dtmin = 0.01
end_time = 1
nl_rel_tol = 1e-12
nl_abs_tol = 1e-7
[]
[Outputs]
exodus = true
csv = true
[Console]
type = Console
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '2 3'
variable = temp
[]
[]
[Postprocessors]
[temp_left]
type = SideAverageValue
boundary = 2
variable = temp
[]
[temp_right]
type = SideAverageValue
boundary = 3
variable = temp
[]
[flux_left]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 2
diffusivity = thermal_conductivity
[]
[flux_right]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 3
diffusivity = thermal_conductivity
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = 'fuel'
[]
[sphere_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = temp
boundary = '4' # outer RVP
T_fluid = ${sphere_outer_Tinf}
htc = ${sphere_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(sphere_convective_out - ptot) / ptot'
pp_names = 'sphere_convective_out ptot'
[]
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_conduction_function.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[AuxVariables]
[dummy]
order = FIRST
family = LAGRANGE
initial_condition = 1.0
[]
[]
[Functions]
[function]
type = ParsedFunction
value = 'if(t > 100.0, 0.0, t)'
[]
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 0.01
specific_heat = 1
[]
[right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 0.005
specific_heat = 1
[]
[]
[Kernels]
[hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[]
[hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 100
gap_conductivity = 10.0
gap_conductivity_function_variable = dummy
gap_conductivity_function = function
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = conduction
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 100
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
nl_abs_tol = 1.0e-10
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '100 101'
variable = 'temp'
[]
[]
[Outputs]
exodus = false
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[./temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[../]
[./disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[../]
[./disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[../]
[./lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[../]
[]
[Materials]
[./left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 1000
specific_heat = 1
[../]
[./right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 500
specific_heat = 1
[../]
[]
[Kernels]
[./hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[../]
[./hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[../]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[simple]
type = GapFluxModelSimple
k = 100
temperature = temp
boundary = 100
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = simple
[]
[]
[BCs]
[./left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 1
[../]
[./right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[../]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[./fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[../]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
[]
[Outputs]
exodus = true
show = 'temp disp_x disp_y'
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_cylinder_mortar_error.i)
rpv_core_gap_size = 0.15
core_outer_radius = 2
rpv_inner_radius = ${fparse 2 + rpv_core_gap_size}
rpv_outer_radius = ${fparse 2.5 + rpv_core_gap_size}
rpv_outer_htc = 10 # W/m^2/K
rpv_outer_Tinf = 300 # K
core_blocks = '1'
rpv_blocks = '3'
[Mesh]
[core_gap_rpv]
type = ConcentricCircleMeshGenerator
num_sectors = 10
radii = '${core_outer_radius} ${rpv_inner_radius} ${rpv_outer_radius}'
rings = '2 1 2'
has_outer_square = false
preserve_volumes = true
portion = full
[]
[rename_core_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = core_gap_rpv
primary_block = 1
paired_block = 2
new_boundary = 'core_outer'
[]
[rename_inner_rpv_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = rename_core_bdy
primary_block = 3
paired_block = 2
new_boundary = 'rpv_inner'
[]
[2d_mesh]
type = BlockDeletionGenerator
input = rename_inner_rpv_bdy
block = 2
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'rpv_inner'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = 2d_mesh
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'core_outer'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Variables]
[Tsolid]
initial_condition = 500
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Kernels]
[heat_source]
type = CoupledForce
variable = Tsolid
block = '${core_blocks}'
v = power_density
[]
[heat_conduction]
type = HeatConduction
variable = Tsolid
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = Tsolid
boundary = 'outer' # outer RPV
coefficient = ${rpv_outer_htc}
T_infinity = ${rpv_outer_Tinf}
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = Tsolid
boundary = 'rpv_inner'
primary_emissivity = 0.8
secondary_emissivity = 0.8
[]
[conduction]
type = GapFluxModelConduction
temperature = Tsolid
boundary = 'rpv_inner'
gap_conductivity = 0.1
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = Tsolid
primary_boundary = 'core_outer'
primary_subdomain = 10000
secondary_boundary = 'rpv_inner'
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = 'CYLINDER'
cylinder_axis_point_2 = '0 0 5'
[]
[]
[AuxVariables]
[power_density]
block = '${core_blocks}'
initial_condition = 50e3
[]
[]
[Materials]
[simple_mat]
type = HeatConductionMaterial
thermal_conductivity = 34.6 # W/m/K
[]
[]
[Postprocessors]
[Tcore_avg]
type = ElementAverageValue
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${core_blocks}'
[]
[Trpv_avg]
type = ElementAverageValue
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${rpv_blocks}'
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = '${core_blocks}'
[]
[rpv_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = Tsolid
boundary = 'outer' # outer RVP
T_fluid = ${rpv_outer_Tinf}
htc = ${rpv_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(rpv_convective_out - ptot) / ptot'
pp_names = 'rpv_convective_out ptot'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = 'rpv_inner core_outer'
variable = 'Tsolid'
[]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = ' lu superlu_dist 1e-5 NONZERO '
'1e-15'
snesmf_reuse_base = false
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
l_max_its = 100
line_search = none
[]
[Outputs]
exodus = false
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_conduction.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 0.01
specific_heat = 1
[]
[right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 0.005
specific_heat = 1
[]
[]
[Kernels]
[hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[]
[hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 100
gap_conductivity = 10.0
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = conduction
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 100
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
nl_abs_tol = 1.0e-10
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '100 101'
variable = 'temp'
[]
[]
[Outputs]
exodus = false
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_cylinder_mortar.i)
rpv_core_gap_size = 0.15
core_outer_radius = 2
rpv_inner_radius = ${fparse 2 + rpv_core_gap_size}
rpv_outer_radius = ${fparse 2.5 + rpv_core_gap_size}
rpv_outer_htc = 10 # W/m^2/K
rpv_outer_Tinf = 300 # K
core_blocks = '1'
rpv_blocks = '3'
[Mesh]
[core_gap_rpv]
type = ConcentricCircleMeshGenerator
num_sectors = 10
radii = '${core_outer_radius} ${rpv_inner_radius} ${rpv_outer_radius}'
rings = '2 1 2'
has_outer_square = false
preserve_volumes = true
portion = full
[]
[rename_core_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = core_gap_rpv
primary_block = 1
paired_block = 2
new_boundary = 'core_outer'
[]
[rename_inner_rpv_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = rename_core_bdy
primary_block = 3
paired_block = 2
new_boundary = 'rpv_inner'
[]
[2d_mesh]
type = BlockDeletionGenerator
input = rename_inner_rpv_bdy
block = 2
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'rpv_inner'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = 2d_mesh
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'core_outer'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Variables]
[Tsolid]
initial_condition = 500
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Kernels]
[heat_source]
type = CoupledForce
variable = Tsolid
block = '${core_blocks}'
v = power_density
[]
[heat_conduction]
type = HeatConduction
variable = Tsolid
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = Tsolid
boundary = 'outer' # outer RPV
coefficient = ${rpv_outer_htc}
T_infinity = ${rpv_outer_Tinf}
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = Tsolid
boundary = 'rpv_inner'
primary_emissivity = 0.8
secondary_emissivity = 0.8
[]
[conduction]
type = GapFluxModelConduction
temperature = Tsolid
boundary = 'rpv_inner'
gap_conductivity = 0.1
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = Tsolid
primary_boundary = 'core_outer'
primary_subdomain = 10000
secondary_boundary = 'rpv_inner'
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = 'CYLINDER'
cylinder_axis_point_1 = '0 0 0'
cylinder_axis_point_2 = '0 0 5'
[]
[]
[AuxVariables]
[power_density]
block = '${core_blocks}'
initial_condition = 50e3
[]
[]
[Materials]
[simple_mat]
type = HeatConductionMaterial
thermal_conductivity = 34.6 # W/m/K
[]
[]
[Postprocessors]
[Tcore_avg]
type = ElementAverageValue
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${core_blocks}'
[]
[Trpv_avg]
type = ElementAverageValue
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${rpv_blocks}'
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = '${core_blocks}'
[]
[rpv_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = Tsolid
boundary = 'outer' # outer RVP
T_fluid = ${rpv_outer_Tinf}
htc = ${rpv_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(rpv_convective_out - ptot) / ptot'
pp_names = 'rpv_convective_out ptot'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = 'rpv_inner core_outer'
variable = 'Tsolid'
[]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = ' lu superlu_dist 1e-5 NONZERO '
'1e-15'
snesmf_reuse_base = false
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
l_max_its = 100
line_search = none
[]
[Outputs]
exodus = false
csv = true
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/varied_pressure_thermomechanical_mortar.i)
## Units in the input file: m-Pa-s-K
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[left_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 20
ny = 10
xmax = 0.25
ymin = 0
ymax = 0.5
boundary_name_prefix = moving_block
[]
[left_block]
type = SubdomainIDGenerator
input = left_rectangle
subdomain_id = 1
[]
[right_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 20
ny = 10
xmin = 0.25
xmax = 0.5
ymin = 0
ymax = 0.5
boundary_name_prefix = fixed_block
boundary_id_offset = 4
[]
[right_block]
type = SubdomainIDGenerator
input = right_rectangle
subdomain_id = 2
[]
[two_blocks]
type = MeshCollectionGenerator
inputs = 'left_block right_block'
[]
[block_rename]
type = RenameBlockGenerator
input = two_blocks
old_block = '1 2'
new_block = 'left_block right_block'
[]
patch_update_strategy = iteration
[]
[Variables]
[disp_x]
block = 'left_block right_block'
[]
[disp_y]
block = 'left_block right_block'
[]
[temperature]
initial_condition = 300.0
[]
[temperature_interface_lm]
block = 'interface_secondary_subdomain'
[]
[]
[Modules]
[TensorMechanics/Master]
[steel]
strain = FINITE
add_variables = false
use_automatic_differentiation = true
generate_output = 'strain_xx strain_xy strain_yy stress_xx stress_xy stress_yy'
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'left_block'
[]
[aluminum]
strain = FINITE
add_variables = false
use_automatic_differentiation = true
generate_output = 'strain_xx strain_xy strain_yy stress_xx stress_xy stress_yy'
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'right_block'
[]
[]
[]
[Kernels]
[HeatDiff_steel]
type = ADHeatConduction
variable = temperature
thermal_conductivity = steel_thermal_conductivity
block = 'left_block'
[]
[HeatTdot_steel]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = steel_heat_capacity
density_name = steel_density
block = 'left_block'
[]
[HeatDiff_aluminum]
type = ADHeatConduction
variable = temperature
thermal_conductivity = aluminum_thermal_conductivity
block = 'right_block'
[]
[HeatTdot_aluminum]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = aluminum_heat_capacity
density_name = aluminum_density
block = 'right_block'
[]
[]
[BCs]
[fixed_bottom_edge]
type = ADDirichletBC
variable = disp_y
value = 0
boundary = 'moving_block_bottom fixed_block_bottom'
[]
[fixed_outer_edge]
type = ADDirichletBC
variable = disp_x
value = 0
boundary = 'fixed_block_right'
[]
[pressure_left_block]
type = ADPressure
variable = disp_x
component = 0
boundary = 'moving_block_left'
function = '1e4*t*y'
[]
[temperature_left]
type = ADDirichletBC
variable = temperature
value = 300
boundary = 'moving_block_left'
[]
[temperature_right]
type = ADDirichletBC
variable = temperature
value = 800
boundary = 'fixed_block_right'
[]
[]
[Contact]
[interface]
primary = moving_block_right
secondary = fixed_block_left
model = frictionless
formulation = mortar
correct_edge_dropping = true
[]
[]
[Constraints]
[thermal_contact]
type = ModularGapConductanceConstraint
variable = temperature_interface_lm
secondary_variable = temperature
primary_boundary = moving_block_right
primary_subdomain = interface_primary_subdomain
secondary_boundary = fixed_block_left
secondary_subdomain = interface_secondary_subdomain
gap_flux_models = 'closed'
use_displaced_mesh = true
[]
[]
[Materials]
[steel_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 1.93e11 #in Pa, 193 GPa, stainless steel 304
poissons_ratio = 0.29
block = 'left_block'
[]
[steel_stress]
type = ADComputeFiniteStrainElasticStress
block = 'left_block'
[]
[steel_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'steel_density steel_thermal_conductivity steel_heat_capacity steel_hardness'
prop_values = ' 8e3 16.2 0.5 129' ## for stainless steel 304
block = 'left_block'
[]
[aluminum_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 6.8e10 #in Pa, 68 GPa, aluminum
poissons_ratio = 0.36
block = 'right_block'
[]
[aluminum_stress]
type = ADComputeFiniteStrainElasticStress
block = 'right_block'
[]
[aluminum_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'aluminum_density aluminum_thermal_conductivity aluminum_heat_capacity aluminum_hardness'
prop_values = ' 2.7e3 210 0.9 15' #for 99% pure Al
block = 'right_block'
[]
[]
[UserObjects]
[closed]
type = GapFluxModelPressureDependentConduction
primary_conductivity = steel_thermal_conductivity
secondary_conductivity = aluminum_thermal_conductivity
temperature = temperature
contact_pressure = interface_normal_lm
primary_hardness = steel_hardness
secondary_hardness = aluminum_hardness
boundary = moving_block_right
[]
[]
[Postprocessors]
[contact_pressure_max]
type = NodalExtremeValue
variable = interface_normal_lm
block = interface_secondary_subdomain
value_type = max
[]
[contact_pressure_average]
type = AverageNodalVariableValue
variable = interface_normal_lm
block = interface_secondary_subdomain
[]
[contact_pressure_min]
type = NodalExtremeValue
variable = interface_normal_lm
block = interface_secondary_subdomain
value_type = min
[]
[interface_temperature_max]
type = NodalExtremeValue
variable = temperature
block = interface_secondary_subdomain
value_type = max
[]
[interface_temperature_average]
type = AverageNodalVariableValue
variable = temperature
block = interface_secondary_subdomain
[]
[interface_temperature_min]
type = NodalExtremeValue
variable = temperature
block = interface_secondary_subdomain
value_type = min
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
automatic_scaling = false
line_search = 'none'
# mortar contact solver options
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = ' lu superlu_dist'
snesmf_reuse_base = false
nl_rel_tol = 1e-7
nl_max_its = 20
l_max_its = 50
dt = 0.125
end_time = 1
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_rz_cylinder_mortar.i)
rpv_core_gap_size = 0.2
core_outer_radius = 2
rpv_inner_radius = '${fparse 2 + rpv_core_gap_size}'
rpv_outer_radius = '${fparse 2.5 + rpv_core_gap_size}'
rpv_width = '${fparse rpv_outer_radius - rpv_inner_radius}'
rpv_outer_htc = 10 # W/m^2/K
rpv_outer_Tinf = 300 # K
core_blocks = '1'
rpv_blocks = '3'
[Mesh]
[gmg]
type = CartesianMeshGenerator
dim = 2
dx = '${core_outer_radius} ${rpv_core_gap_size} ${rpv_width}'
ix = '400 1 100'
dy = 1
iy = '5'
[]
[set_block_id1]
type = SubdomainBoundingBoxGenerator
input = gmg
bottom_left = '0 0 0'
top_right = '${core_outer_radius} 1 0'
block_id = 1
location = INSIDE
[]
[rename_core_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id1
primary_block = 1
paired_block = 0
new_boundary = 'core_outer'
[]
[set_block_id3]
type = SubdomainBoundingBoxGenerator
input = rename_core_bdy
bottom_left = '${rpv_inner_radius} 0 0'
top_right = '${rpv_outer_radius} 1 0'
block_id = 3
location = INSIDE
[]
[rename_inner_rpv_bdy]
type = SideSetsBetweenSubdomainsGenerator
input = set_block_id3
primary_block = 3
paired_block = 0
new_boundary = 'rpv_inner'
[]
# comment out for test without gap
[2d_mesh]
type = BlockDeletionGenerator
input = rename_inner_rpv_bdy
block = 0
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'rpv_inner'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = 2d_mesh
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = 'core_outer'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
coord_type = RZ
[]
[Variables]
[Tsolid]
initial_condition = 500
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Kernels]
[heat_source]
type = CoupledForce
variable = Tsolid
block = '${core_blocks}'
v = power_density
[]
[heat_conduction]
type = HeatConduction
variable = Tsolid
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = Tsolid
boundary = 'right' # outer RPV
coefficient = ${rpv_outer_htc}
T_infinity = ${rpv_outer_Tinf}
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = Tsolid
boundary = 'rpv_inner'
primary_emissivity = 0.8
secondary_emissivity = 0.8
[]
[conduction]
type = GapFluxModelConduction
temperature = Tsolid
boundary = 'rpv_inner'
gap_conductivity = 0.1
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = Tsolid
primary_boundary = 'core_outer'
primary_subdomain = 10000
secondary_boundary = 'rpv_inner'
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = 'CYLINDER'
[]
[]
[AuxVariables]
[power_density]
block = '${core_blocks}'
initial_condition = 50e3
[]
[]
[Materials]
[simple_mat]
type = HeatConductionMaterial
thermal_conductivity = 34.6 # W/m/K
[]
[]
[Postprocessors]
[Tcore_avg]
type = ElementAverageValue
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${core_blocks}'
[]
[Tcore_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${core_blocks}'
[]
[Trpv_avg]
type = ElementAverageValue
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_max]
type = ElementExtremeValue
value_type = max
variable = Tsolid
block = '${rpv_blocks}'
[]
[Trpv_min]
type = ElementExtremeValue
value_type = min
variable = Tsolid
block = '${rpv_blocks}'
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = '${core_blocks}'
[]
[rpv_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = Tsolid
boundary = 'right' # outer RVP
T_fluid = ${rpv_outer_Tinf}
htc = ${rpv_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(rpv_convective_out - ptot) / ptot'
pp_names = 'rpv_convective_out ptot'
[]
[flux_from_core] # converges to ptot as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = core_outer
diffusivity = thermal_conductivity
[]
[flux_into_rpv] # converges to rpv_convective_out as the mesh is refined
type = SideDiffusiveFluxIntegral
variable = Tsolid
boundary = rpv_inner
diffusivity = thermal_conductivity
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = 'rpv_inner core_outer'
variable = Tsolid
[]
[]
[Executioner]
type = Steady
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -mat_mffd_err -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = ' lu superlu_dist 1e-5 NONZERO '
'1e-15'
snesmf_reuse_base = false
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
l_max_its = 100
line_search = none
[]
[Outputs]
exodus = false
csv = true
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/closed_gap_pressure_dependent_thermal_contact.i)
## Units in the input file: m-Pa-s-K
# The analytical solution for a steady state thermal contact and a mechanical
# contact pressure of 1Pa, the temperature of the steel block at the interface
# is calcaluated as
#
# T^s_{int} = \frac{T^a_{BC}C_T k_a + T^s_{BC} k_s \left(k_a +C_T \right)}{k_s (k_a + C_T) + k_a C_T}
# T^s_{int} = 460K
#
# with the boundary conditions and thermal conductivity values specified in the
# input file below. Similarly, the temperature of the aluminum block (cold block)
# is calculated as
#
# T^a_{int} = \frac{T^s_{int} C_T + T^a_{BC} k_a}{k_a + C_T}
# T^a_{int} = 276K
#
# The values predicted by the simulation at the interface converge towards these
# temperature values, and are within a few degrees by 240s. A smaller timestep
# than is practical for the regression test application further reduces the difference
# between the analytical solution and the simulation result.
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[left_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmax = 1
ymin = 0
ymax = 0.5
boundary_name_prefix = moving_block
[]
[left_block]
type = SubdomainIDGenerator
input = left_rectangle
subdomain_id = 1
[]
[right_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmin = 1
xmax = 2
ymin = 0
ymax = 0.5
boundary_name_prefix = fixed_block
boundary_id_offset = 4
[]
[right_block]
type = SubdomainIDGenerator
input = right_rectangle
subdomain_id = 2
[]
[two_blocks]
type = MeshCollectionGenerator
inputs = 'left_block right_block'
[]
[block_rename]
type = RenameBlockGenerator
input = two_blocks
old_block = '1 2'
new_block = 'left_block right_block'
[]
[]
[Variables]
[disp_x]
block = 'left_block right_block'
[]
[disp_y]
block = 'left_block right_block'
[]
[temperature]
initial_condition = 525.0
[]
[temperature_interface_lm]
block = 'interface_secondary_subdomain'
[]
[]
[Modules]
[TensorMechanics/Master]
[steel]
strain = SMALL
add_variables = false
use_automatic_differentiation = true
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'left_block'
[]
[aluminum]
strain = SMALL
add_variables = false
use_automatic_differentiation = true
additional_generate_output = 'vonmises_stress'
additional_material_output_family = 'MONOMIAL'
additional_material_output_order = 'FIRST'
block = 'right_block'
[]
[]
[]
[Kernels]
[HeatDiff_steel]
type = ADHeatConduction
variable = temperature
thermal_conductivity = steel_thermal_conductivity
block = 'left_block'
[]
[HeatTdot_steel]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = steel_heat_capacity
density_name = steel_density
block = 'left_block'
[]
[HeatDiff_aluminum]
type = ADHeatConduction
variable = temperature
thermal_conductivity = aluminum_thermal_conductivity
block = 'right_block'
[]
[HeatTdot_aluminum]
type = ADHeatConductionTimeDerivative
variable = temperature
specific_heat = aluminum_heat_capacity
density_name = aluminum_density
block = 'right_block'
[]
[]
[BCs]
[fixed_bottom_edge]
type = ADDirichletBC
variable = disp_y
value = 0
boundary = 'moving_block_bottom fixed_block_bottom'
[]
[fixed_outer_edge]
type = ADDirichletBC
variable = disp_x
value = 0
boundary = 'fixed_block_right'
[]
[displacement_left_block]
type = ADDirichletBC
variable = disp_x
value = 1.8e-11
boundary = 'moving_block_left'
[]
[temperature_left]
type = ADDirichletBC
variable = temperature
value = 800
boundary = 'moving_block_left'
[]
[temperature_right]
type = ADDirichletBC
variable = temperature
value = 250
boundary = 'fixed_block_right'
[]
[]
[Contact]
[interface]
primary = moving_block_right
secondary = fixed_block_left
model = frictionless
formulation = mortar
correct_edge_dropping = true
[]
[]
[Constraints]
[thermal_contact]
type = ModularGapConductanceConstraint
variable = temperature_interface_lm
secondary_variable = temperature
primary_boundary = moving_block_right
primary_subdomain = interface_primary_subdomain
secondary_boundary = fixed_block_left
secondary_subdomain = interface_secondary_subdomain
gap_flux_models = 'closed'
use_displaced_mesh = true
[]
[]
[Materials]
[steel_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 1.93e11 #in Pa, 193 GPa, stainless steel 304
poissons_ratio = 0.29
block = 'left_block'
[]
[steel_stress]
type = ADComputeLinearElasticStress
block = 'left_block'
[]
[steel_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'steel_density steel_thermal_conductivity steel_heat_capacity'
prop_values = '8e3 16.2 0.5' ## for stainless steel 304
block = 'left_block'
[]
[aluminum_elasticity_tensor]
type = ADComputeIsotropicElasticityTensor
youngs_modulus = 6.8e10 #in Pa, 68 GPa, aluminum
poissons_ratio = 0.36
block = 'right_block'
[]
[aluminum_stress]
type = ADComputeLinearElasticStress
block = 'right_block'
[]
[aluminum_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'aluminum_density aluminum_thermal_conductivity aluminum_heat_capacity'
prop_values = ' 2.7e3 210 0.9'
block = 'right_block'
[]
[]
[UserObjects]
[closed]
type = GapFluxModelPressureDependentConduction
primary_conductivity = steel_thermal_conductivity
secondary_conductivity = aluminum_thermal_conductivity
temperature = temperature
contact_pressure = interface_normal_lm
primary_hardness = 1.0
secondary_hardness = 1.0
boundary = moving_block_right
[]
[]
[Postprocessors]
[steel_pt_interface_temperature]
type = NodalVariableValue
nodeid = 245
variable = temperature
[]
[aluminum_pt_interface_temperature]
type = NodalVariableValue
nodeid = 657
variable = temperature
[]
[interface_heat_flux_steel]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = moving_block_right
diffusivity = steel_thermal_conductivity
[]
[interface_heat_flux_aluminum]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = fixed_block_left
diffusivity = aluminum_thermal_conductivity
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
automatic_scaling = false
line_search = 'none'
# mortar contact solver options
petsc_options = '-snes_converged_reason -pc_svd_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = ' lu superlu_dist'
snesmf_reuse_base = false
nl_rel_tol = 1e-10
nl_max_its = 20
l_max_its = 50
dt = 60
end_time = 240
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/large_gap_heat_transfer_test_sphere_mortar.i)
sphere_outer_htc = 10 # W/m^2/K
sphere_outer_Tinf = 300 # K
[GlobalParams]
order = SECOND
family = LAGRANGE
[]
[Problem]
coord_type = RZ
kernel_coverage_check = false
material_coverage_check = false
[]
[Mesh]
[file]
type = FileMeshGenerator
file = cyl2D.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '2'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '3'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Functions]
[temp]
type = PiecewiseLinear
x = '0 1'
y = '100 200'
[]
[]
[Variables]
[temp]
initial_condition = 500
[]
[lm]
order = SECOND
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[AuxVariables]
[power_density]
block = 'fuel'
initial_condition = 50e3
[]
[]
[Kernels]
[heat_conduction]
type = HeatConduction
variable = temp
block = '1 2'
[]
[heat_source]
type = CoupledForce
variable = temp
block = 'fuel'
v = power_density
[]
[]
[Materials]
[heat1]
type = HeatConductionMaterial
block = '1 2'
specific_heat = 1.0
thermal_conductivity = 34.6
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = temp
boundary = 2
primary_emissivity = 0.0
secondary_emissivity = 0.0
[]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 2
gap_conductivity = 5.0
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
primary_boundary = 3
primary_subdomain = 10000
secondary_boundary = 2
secondary_subdomain = 10001
gap_flux_models = 'radiation conduction'
gap_geometry_type = SPHERE
sphere_origin = '0 0 0'
[]
[]
[BCs]
[RPV_out_BC] # k \nabla T = h (T- T_inf) at RPV outer boundary
type = ConvectiveFluxFunction # (Robin BC)
variable = temp
boundary = '4' # outer RPV
coefficient = ${sphere_outer_htc}
T_infinity = ${sphere_outer_Tinf}
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu superlu_dist'
dt = 1
dtmin = 0.01
end_time = 1
nl_rel_tol = 1e-12
nl_abs_tol = 1e-7
[]
[Outputs]
exodus = true
csv = true
[Console]
type = Console
[]
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '2 3'
variable = temp
[]
[]
[Postprocessors]
[temp_left]
type = SideAverageValue
boundary = 2
variable = temp
[]
[temp_right]
type = SideAverageValue
boundary = 3
variable = temp
[]
[flux_left]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 2
diffusivity = thermal_conductivity
[]
[flux_right]
type = SideDiffusiveFluxIntegral
variable = temp
boundary = 3
diffusivity = thermal_conductivity
[]
[ptot]
type = ElementIntegralVariablePostprocessor
variable = power_density
block = 'fuel'
[]
[sphere_convective_out]
type = ConvectiveHeatTransferSideIntegral
T_solid = temp
boundary = '4' # outer RVP
T_fluid = ${sphere_outer_Tinf}
htc = ${sphere_outer_htc}
[]
[heat_balance] # should be equal to 0 upon convergence
type = ParsedPostprocessor
function = '(sphere_convective_out - ptot) / ptot'
pp_names = 'sphere_convective_out ptot'
[]
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar.i)
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = '10001'
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = '10000'
new_block_name = 'primary_lower'
input = secondary
[]
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = HeatConductionMaterial
block = 1
thermal_conductivity = 1000
specific_heat = 1
[]
[right]
type = HeatConductionMaterial
block = 2
thermal_conductivity = 500
specific_heat = 1
[]
[]
[Kernels]
[hc]
type = HeatConduction
variable = temp
use_displaced_mesh = false
block = '1 2'
[]
[]
[UserObjects]
[simple]
type = GapFluxModelSimple
k = 100
temperature = temp
boundary = 100
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = simple
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = 'PJFNK'
nl_rel_tol = 1e-11
[]
[Outputs]
exodus = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/modular_gap_heat_transfer_mortar_displaced_radiation_conduction_separate.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[lm_conduction]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 0.01
specific_heat = 1
[]
[right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 0.005
specific_heat = 1
[]
[]
[Kernels]
[hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[]
[hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = temp
boundary = 100
primary_emissivity = 1.0
secondary_emissivity = 1.0
use_displaced_mesh = true
[]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 100
gap_conductivity = 0.02
use_displaced_mesh = true
[]
[]
[Constraints]
[ced_radiation]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = 'radiation'
[]
[ced_conduction]
type = ModularGapConductanceConstraint
variable = lm_conduction
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
gap_flux_models = 'conduction'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 100
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
nl_abs_tol = 1.0e-10
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '100 101'
variable = 'temp'
[]
[]
[Outputs]
exodus = false
csv = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar/closed_gap_prescribed_pressure.i)
## Units in the input file: m-Pa-s-K
[Mesh]
[left_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmax = 1
ymin = 0
ymax = 0.5
boundary_name_prefix = moving_block
[]
[left_block]
type = SubdomainIDGenerator
input = left_rectangle
subdomain_id = 1
[]
[right_rectangle]
type = GeneratedMeshGenerator
dim = 2
nx = 40
ny = 10
xmin = 1
xmax = 2
ymin = 0
ymax = 0.5
boundary_name_prefix = fixed_block
boundary_id_offset = 4
[]
[right_block]
type = SubdomainIDGenerator
input = right_rectangle
subdomain_id = 2
[]
[two_blocks]
type = MeshCollectionGenerator
inputs = 'left_block right_block'
[]
[block_rename]
type = RenameBlockGenerator
input = two_blocks
old_block = '1 2'
new_block = 'left_block right_block'
[]
[interface_secondary_subdomain]
type = LowerDBlockFromSidesetGenerator
sidesets = 'fixed_block_left'
new_block_id = 3
new_block_name = 'interface_secondary_subdomain'
input = block_rename
[]
[interface_primary_subdomain]
type = LowerDBlockFromSidesetGenerator
sidesets = 'moving_block_right'
new_block_id = 4
new_block_name = 'interface_primary_subdomain'
input = interface_secondary_subdomain
[]
[]
[Variables]
[temperature]
initial_condition = 525.0
[]
[temperature_interface_lm]
block = 'interface_secondary_subdomain'
[]
[]
[AuxVariables]
[interface_normal_lm]
order = FIRST
family = LAGRANGE
block = 'interface_secondary_subdomain'
initial_condition = 100.0
[]
[]
[Kernels]
[HeatDiff_steel]
type = ADHeatConduction
variable = temperature
thermal_conductivity = steel_thermal_conductivity
block = 'left_block'
[]
[HeatDiff_aluminum]
type = ADHeatConduction
variable = temperature
thermal_conductivity = aluminum_thermal_conductivity
block = 'right_block'
[]
[]
[BCs]
[temperature_left]
type = ADDirichletBC
variable = temperature
value = 800
boundary = 'moving_block_left'
[]
[temperature_right]
type = ADDirichletBC
variable = temperature
value = 250
boundary = 'fixed_block_right'
[]
[]
[Constraints]
[thermal_contact]
type = ModularGapConductanceConstraint
variable = temperature_interface_lm
secondary_variable = temperature
primary_boundary = moving_block_right
primary_subdomain = interface_primary_subdomain
secondary_boundary = fixed_block_left
secondary_subdomain = interface_secondary_subdomain
gap_flux_models = 'closed'
[]
[]
[Materials]
[steel_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'steel_density steel_thermal_conductivity steel_hardness'
prop_values = '8e3 16.2 129' ## for stainless steel 304
block = 'left_block'
[]
[aluminum_thermal_properties]
type = ADGenericConstantMaterial
prop_names = 'aluminum_density aluminum_thermal_conductivity aluminum_hardness'
prop_values = ' 2.7e3 210 15' #for 99% pure Al
block = 'right_block'
[]
[]
[UserObjects]
[closed]
type = GapFluxModelPressureDependentConduction
primary_conductivity = steel_thermal_conductivity
secondary_conductivity = aluminum_thermal_conductivity
temperature = temperature
contact_pressure = interface_normal_lm
primary_hardness = steel_hardness
secondary_hardness = aluminum_hardness
boundary = moving_block_right
[]
[]
[Postprocessors]
[steel_interface_temperature]
type = AverageNodalVariableValue
variable = temperature
block = interface_primary_subdomain
[]
[aluminum_interface_temperature]
type = AverageNodalVariableValue
variable = temperature
block = interface_secondary_subdomain
[]
[interface_heat_flux_steel]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = moving_block_right
diffusivity = steel_thermal_conductivity
[]
[interface_heat_flux_aluminum]
type = ADSideDiffusiveFluxAverage
variable = temperature
boundary = fixed_block_left
diffusivity = aluminum_thermal_conductivity
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
automatic_scaling = false
nl_rel_tol = 1e-14
nl_max_its = 20
[]
[Outputs]
csv = true
perf_graph = true
[]
(modules/heat_conduction/test/tests/gap_heat_transfer_mortar_action/modular_gap_heat_transfer_mortar_displaced_radiation_conduction_verbose.i)
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
[file]
type = FileMeshGenerator
file = 2blk-gap.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
sidesets = '101'
new_block_id = 10001
new_block_name = 'secondary_lower'
input = file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
sidesets = '100'
new_block_id = 10000
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
kernel_coverage_check = false
material_coverage_check = false
[]
[Variables]
[temp]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_x]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[disp_y]
order = FIRST
family = LAGRANGE
block = '1 2'
[]
[lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
[]
[]
[Materials]
[left]
type = ADHeatConductionMaterial
block = 1
thermal_conductivity = 0.01
specific_heat = 1
[]
[right]
type = ADHeatConductionMaterial
block = 2
thermal_conductivity = 0.005
specific_heat = 1
[]
[]
[Kernels]
[hc_displaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = '1'
[]
[hc_undisplaced_block]
type = ADHeatConduction
variable = temp
use_displaced_mesh = false
block = '2'
[]
[disp_x]
type = Diffusion
variable = disp_x
block = '1 2'
[]
[disp_y]
type = Diffusion
variable = disp_y
block = '1 2'
[]
[]
[UserObjects]
[radiation]
type = GapFluxModelRadiation
temperature = temp
boundary = 100
primary_emissivity = 1.0
secondary_emissivity = 1.0
use_displaced_mesh = true
[]
[conduction]
type = GapFluxModelConduction
temperature = temp
boundary = 100
gap_conductivity = 0.02
use_displaced_mesh = true
[]
[]
[Constraints]
[ced]
type = ModularGapConductanceConstraint
variable = lm
secondary_variable = temp
use_displaced_mesh = true
primary_boundary = 100
primary_subdomain = 10000
secondary_boundary = 101
secondary_subdomain = 10001
correct_edge_dropping = true
gap_flux_models = 'radiation conduction'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = temp
boundary = 'left'
value = 100
[]
[right]
type = DirichletBC
variable = temp
boundary = 'right'
value = 0
[]
[left_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'left'
value = .1
[]
[right_disp_x]
type = DirichletBC
preset = false
variable = disp_x
boundary = 'right'
value = 0
[]
[bottom_disp_y]
type = DirichletBC
preset = false
variable = disp_y
boundary = 'bottom'
value = 0
[]
[]
[Preconditioning]
[fmp]
type = SMP
full = true
solve_type = 'NEWTON'
[]
[]
[Executioner]
type = Steady
nl_rel_tol = 1e-11
nl_abs_tol = 1.0e-10
[]
[VectorPostprocessors]
[NodalTemperature]
type = NodalValueSampler
sort_by = id
boundary = '100 101'
variable = 'temp'
[]
[]
[Outputs]
csv = true
[exodus]
type = Exodus
show = 'temp'
[]
[]