- ACross-sectional area of connected flow channels
C++ Type:std::vector<VariableName>
Controllable:No
Description:Cross-sectional area of connected flow channels
- A_refReference area [m^2]
C++ Type:double
Controllable:No
Description:Reference area [m^2]
- KForm loss coefficient [-]
C++ Type:double
Controllable:No
Description:Form loss coefficient [-]
- boundaryThe list of boundary IDs from the mesh where this boundary condition applies
C++ Type:std::vector<BoundaryName>
Controllable:No
Description:The list of boundary IDs from the mesh where this boundary condition applies
- fpFluid properties user object name
C++ Type:UserObjectName
Controllable:No
Description:Fluid properties user object name
- gravity_magnitudeGravity constant, [m/s^2]
C++ Type:double
Controllable:No
Description:Gravity constant, [m/s^2]
- headPump head, [m]
C++ Type:double
Controllable:Yes
Description:Pump head, [m]
- normalsFlow channel outward normals or junction inward normals
C++ Type:std::vector<double>
Controllable:No
Description:Flow channel outward normals or junction inward normals
- numerical_flux_namesThe names of the user objects that compute the numerical flux at each flow channel.
C++ Type:std::vector<UserObjectName>
Controllable:No
Description:The names of the user objects that compute the numerical flux at each flow channel.
- rhoArho*A of the connected flow channels
C++ Type:std::vector<VariableName>
Controllable:No
Description:rho*A of the connected flow channels
- rhoEArhoE*A of the connected flow channels
C++ Type:std::vector<VariableName>
Controllable:No
Description:rhoE*A of the connected flow channels
- rhoEVrho*E*V of the junction
C++ Type:std::vector<VariableName>
Controllable:No
Description:rho*E*V of the junction
- rhoVrho*V of the junction
C++ Type:std::vector<VariableName>
Controllable:No
Description:rho*V of the junction
- rhouArhou*A of the connected flow channels
C++ Type:std::vector<VariableName>
Controllable:No
Description:rhou*A of the connected flow channels
- rhouVrho*u*V of the junction
C++ Type:std::vector<VariableName>
Controllable:No
Description:rho*u*V of the junction
- rhovVrho*v*V of the junction
C++ Type:std::vector<VariableName>
Controllable:No
Description:rho*v*V of the junction
- rhowVrho*w*V of the junction
C++ Type:std::vector<VariableName>
Controllable:No
Description:rho*w*V of the junction
- volumeVolume of the junction
C++ Type:double
Controllable:No
Description:Volume of the junction
ADPump1PhaseUserObject
Computes and caches flux and residual vectors for a 1-phase pump
This user object is used with the Pump1Phase component. It computes the fluxes that are used in ADVolumeJunction1PhaseBC for the two connected flow channels and the residuals that are used in ADVolumeJunctionAdvectionScalarKernel for each of the pump's scalar degrees of freedom. It also adds both a momentum and energy source term due to the user supplied pump head.
Input Parameters
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM, ALWAYS.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Controllable:No
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM, ALWAYS.
- processor_idsProcessor IDs owning each connected flow channel element
C++ Type:std::vector<unsigned int>
Controllable:No
Description:Processor IDs owning each connected flow channel element
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.