ViewfactorVectorPostprocessor

VectorPostprocessor for accessing view factors from GrayLambertSurfaceRadiationBase UO

Description

ViewfactorVectorPostprocessor outputs the view factors between all boundaries involved in a gray, diffuse view factor calculation.

  [./view_factors]
    type = ViewfactorVectorPostprocessor
    surface_radiation_object_name = gray_lambert
  [../]

Input Parameters

surface_radiation_object_nameName of the GrayLambertSurfaceRadiationBase UO
C++ Type:UserObjectName
Options:
Description:Name of the GrayLambertSurfaceRadiationBase UO

Required Parameters

contains_complete_historyFalseSet this flag to indicate that the values in all vectors declared by this VPP represent a time history (e.g. with each invocation, new values are added and old values are never removed). This changes the output so that only a single file is output and updated with each invocation
Default:False
C++ Type:bool
Options:
Description:Set this flag to indicate that the values in all vectors declared by this VPP represent a time history (e.g. with each invocation, new values are added and old values are never removed). This changes the output so that only a single file is output and updated with each invocation
execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Options:NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM
Description:The list of flag(s) indicating when this object should be executed, the available options include NONE, INITIAL, LINEAR, NONLINEAR, TIMESTEP_END, TIMESTEP_BEGIN, FINAL, CUSTOM.
parallel_typeREPLICATEDSet how the data is represented within the VectorPostprocessor (VPP); 'distributed' indicates that data within the VPP is distributed and no auto communication is preformed, this setting will result in parallel output within the CSV output; 'replicated' indicates that the data within the VPP is correct on processor 0, the data will automatically be broadcast to all processors unless the '_auto_broadcast' param is set to false within the validParams function.
Default:REPLICATED
C++ Type:MooseEnum
Options:DISTRIBUTED, REPLICATED
Description:Set how the data is represented within the VectorPostprocessor (VPP); 'distributed' indicates that data within the VPP is distributed and no auto communication is preformed, this setting will result in parallel output within the CSV output; 'replicated' indicates that the data within the VPP is correct on processor 0, the data will automatically be broadcast to all processors unless the '_auto_broadcast' param is set to false within the validParams function.

Optional Parameters

allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Options:
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
force_preauxFalseForces the GeneralUserObject to be executed in PREAUX
Default:False
C++ Type:bool
Options:
Description:Forces the GeneralUserObject to be executed in PREAUX
force_preicFalseForces the GeneralUserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Options:
Description:Forces the GeneralUserObject to be executed in PREIC during initial setup
outputsVector of output names were you would like to restrict the output of variables(s) associated with this object
C++ Type:std::vector<OutputName>
Options:
Description:Vector of output names were you would like to restrict the output of variables(s) associated with this object
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Options:
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

Input Files

(modules/heat_conduction/test/tests/gray_lambert_radiator/gray_lambert_cavity.i)

References

(modules/heat_conduction/test/tests/gray_lambert_radiator/gray_lambert_cavity.i)

[Mesh]
  type = GeneratedMesh
  dim = 2
  xmin = 0
  xmax = 1
  ymin = 0
  ymax = 2
  nx = 1
  ny = 1
[]

[Problem]
  kernel_coverage_check = false
[]

[Variables]
  [./temperature]
    initial_condition = 300
  [../]
[]

[UserObjects]
  [./gray_lambert]
    type = ConstantViewFactorSurfaceRadiation
    boundary = 'bottom top left right'
    fixed_temperature_boundary = 'bottom top'
    fixed_boundary_temperatures = '550 300'
    adiabatic_boundary = 'right left'
    emissivity = '1 0.75 0.75 0.75'
    temperature = temperature
    view_factors = '0 0.123 0.6928 0.1841;
                    0.123 0 0.1841 0.6928;
                    0.2771 0.0736 0.4458 0.2035;
                    0.0736 0.2771 0.2035 0.4458'
  [../]
[]

[VectorPostprocessors]
  [./lambert_vpp]
    type = SurfaceRadiationVectorPostprocessor
    surface_radiation_object_name = gray_lambert
    information = 'temperature emissivity radiosity heat_flux_density'
  [../]

  [./view_factors]
    type = ViewfactorVectorPostprocessor
    surface_radiation_object_name = gray_lambert
  [../]
[]

[Postprocessors]
  [./heat_flux_density_bottom]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = HEAT_FLUX_DENSITY
    boundary = bottom
  [../]

  [./temperature_left]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = TEMPERATURE
    boundary = left
  [../]

  [./temperature_right]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = TEMPERATURE
    boundary = right
  [../]

  [./brightness_top]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = RADIOSITY
    boundary = top
  [../]
[]

[Executioner]
  type = Transient
  num_steps = 1
[]

(modules/heat_conduction/test/tests/gray_lambert_radiator/gray_lambert_cavity.i)

[Mesh]
  type = GeneratedMesh
  dim = 2
  xmin = 0
  xmax = 1
  ymin = 0
  ymax = 2
  nx = 1
  ny = 1
[]

[Problem]
  kernel_coverage_check = false
[]

[Variables]
  [./temperature]
    initial_condition = 300
  [../]
[]

[UserObjects]
  [./gray_lambert]
    type = ConstantViewFactorSurfaceRadiation
    boundary = 'bottom top left right'
    fixed_temperature_boundary = 'bottom top'
    fixed_boundary_temperatures = '550 300'
    adiabatic_boundary = 'right left'
    emissivity = '1 0.75 0.75 0.75'
    temperature = temperature
    view_factors = '0 0.123 0.6928 0.1841;
                    0.123 0 0.1841 0.6928;
                    0.2771 0.0736 0.4458 0.2035;
                    0.0736 0.2771 0.2035 0.4458'
  [../]
[]

[VectorPostprocessors]
  [./lambert_vpp]
    type = SurfaceRadiationVectorPostprocessor
    surface_radiation_object_name = gray_lambert
    information = 'temperature emissivity radiosity heat_flux_density'
  [../]

  [./view_factors]
    type = ViewfactorVectorPostprocessor
    surface_radiation_object_name = gray_lambert
  [../]
[]

[Postprocessors]
  [./heat_flux_density_bottom]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = HEAT_FLUX_DENSITY
    boundary = bottom
  [../]

  [./temperature_left]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = TEMPERATURE
    boundary = left
  [../]

  [./temperature_right]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = TEMPERATURE
    boundary = right
  [../]

  [./brightness_top]
    type = GrayLambertSurfaceRadiationPP
    surface_radiation_object_name = gray_lambert
    return_type = RADIOSITY
    boundary = top
  [../]
[]

[Executioner]
  type = Transient
  num_steps = 1
[]

Description
Input Parameters
Input Files
References

Install MOOSE

New Users

Examples and Tutorials

Application Usage

Physics and Syntax

Application Development

Framework Development

MOOSEDocs

Infrastructure

Questions

Information and Tools

INL Applications and Remote Access