- alphavan Genuchten parameter alpha. Must be positive
C++ Type:double
Description:van Genuchten parameter alpha. Must be positive
- mvan Genuchten exponent m. Must be between 0 and 1, and optimally should be set to >0.5
C++ Type:double
Description:van Genuchten exponent m. Must be between 0 and 1, and optimally should be set to >0.5
PorousFlowCapillaryPressureVG
van Genuchten capillary pressure
van Genuchten's capillary-pressure relationship (Genuchten, 1980)
or
The effective saturation has been denoted by and is the porepressure, which is the negative of the capillary pressure: . Here and are user-defined parameters. The parameter must satisfy
By default, a logarithmic extension for low liquid phase saturations is implemented. This can be disabled by setting log_extension = false.
Input Parameters
- blockThe list of block ids (SubdomainID) that this object will be applied
C++ Type:std::vector<SubdomainName>
Options:
Description:The list of block ids (SubdomainID) that this object will be applied
- log_extensionTrueUse a logarithmic extension for low saturation to avoid capillary pressure going to infinity. Default is true. Set to false if your capillary pressure depends on spatially-dependent variables other than saturation, as the log-extension C++ code for this case has yet to be implemented
Default:True
C++ Type:bool
Options:
Description:Use a logarithmic extension for low saturation to avoid capillary pressure going to infinity. Default is true. Set to false if your capillary pressure depends on spatially-dependent variables other than saturation, as the log-extension C++ code for this case has yet to be implemented
- pc_max1e+09Maximum capillary pressure (Pa). Must be > 0. Default is 1e9
Default:1e+09
C++ Type:double
Options:
Description:Maximum capillary pressure (Pa). Must be > 0. Default is 1e9
- s_scale1CapillaryPressure = f(Seff * s_scale) - f(s_scale), where f is the van Genuchten expression. Setting s_scale<1 is unusual but sometimes helps fully saturated, 2-phase PP simulations converge as the zero derivative (1/f'(S=1)=0) is removed
Default:1
C++ Type:double
Options:
Description:CapillaryPressure = f(Seff * s_scale) - f(s_scale), where f is the van Genuchten expression. Setting s_scale<1 is unusual but sometimes helps fully saturated, 2-phase PP simulations converge as the zero derivative (1/f'(S=1)=0) is removed
- sat_lr0Liquid residual saturation. Must be between 0 and 1. Default is 0
Default:0
C++ Type:double
Options:
Description:Liquid residual saturation. Must be between 0 and 1. Default is 0
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Options:
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Options:
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Options:
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Options:
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Options:
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Options:
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
Input Files
- (modules/porous_flow/test/tests/jacobian/pls01.i)
- (modules/porous_flow/test/tests/newton_cooling/nc02.i)
- (modules/porous_flow/test/tests/jacobian/eff_stress02.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except04.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_twophase.i)
- (modules/porous_flow/test/tests/jacobian/fflux01.i)
- (modules/porous_flow/test/tests/dirackernels/pls03.i)
- (modules/porous_flow/test/tests/mass_conservation/mass04.i)
- (modules/porous_flow/test/tests/jacobian/mass09.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d.i)
- (modules/porous_flow/test/tests/gravity/grav02f.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_05.i)
- (modules/porous_flow/test/tests/hysteresis/relperm_jac.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except14.i)
- (modules/porous_flow/test/tests/jacobian/eff_stress01.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_gas.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten1.i)
- (modules/porous_flow/test/tests/aux_kernels/properties.i)
- (modules/porous_flow/test/tests/mass_conservation/mass02.i)
- (modules/porous_flow/test/tests/fluidstate/coldwater_injection_radial.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_twophase_nonisothermal.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection01.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro05.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten3.i)
- (modules/porous_flow/test/tests/jacobian/mass_vol_exp03.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
- (modules/porous_flow/test/tests/jacobian/mass08.i)
- (modules/porous_flow/test/tests/jacobian/denergy03.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except15.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except03.i)
- (modules/porous_flow/test/tests/sinks/s10.i)
- (modules/porous_flow/test/tests/jacobian/mass02.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rd02.i)
- (modules/porous_flow/examples/restart/gas_injection.i)
- (modules/porous_flow/test/tests/hysteresis/1phase_relperm.i)
- (modules/porous_flow/test/tests/gravity/grav01d.i)
- (modules/porous_flow/test/tests/jacobian/mass_vol_exp02.i)
- (modules/porous_flow/test/tests/adaptivity/tet4_adaptivity.i)
- (modules/porous_flow/test/tests/jacobian/fflux13.i)
- (modules/porous_flow/test/tests/jacobian/eff_stress03.i)
- (modules/porous_flow/test/tests/mass_conservation/mass01.i)
- (modules/porous_flow/test/tests/jacobian/mass10_nodens.i)
- (modules/porous_flow/test/tests/radioactive_decay/radioactive_decay01.i)
- (modules/porous_flow/test/tests/sinks/s08.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except09.i)
- (modules/porous_flow/examples/coal_mining/fine_with_fluid.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fullsat.i)
- (modules/porous_flow/test/tests/jacobian/heat_advection02.i)
- (modules/porous_flow/test/tests/gravity/grav01a.i)
- (modules/porous_flow/test/tests/desorption/desorption01.i)
- (modules/porous_flow/test/tests/dirackernels/bh05.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro03.i)
- (modules/porous_flow/test/tests/jacobian/mass05.i)
- (modules/porous_flow/test/tests/sinks/s05.i)
- (modules/porous_flow/test/tests/aux_kernels/darcy_velocity.i)
- (modules/porous_flow/test/tests/jacobian/fflux12.i)
- (modules/porous_flow/test/tests/sinks/s01.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM.i)
- (modules/porous_flow/test/tests/sinks/s03.i)
- (modules/porous_flow/test/tests/poro_elasticity/undrained_oedometer.i)
- (modules/porous_flow/test/tests/jacobian/pls04.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except16.i)
- (modules/porous_flow/test/tests/sinks/s02.i)
- (modules/porous_flow/test/tests/heat_advection/heat_advection_1d_KT.i)
- (modules/porous_flow/test/tests/jacobian/desorped_mass01.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection4.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except10.i)
- (modules/porous_flow/test/tests/jacobian/mass_vol_exp01.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except05.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_03.i)
- (modules/porous_flow/test/tests/jacobian/hgs01.i)
- (modules/porous_flow/test/tests/jacobian/denergy04.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except02.i)
- (modules/porous_flow/test/tests/dirackernels/squarepulse1.i)
- (modules/porous_flow/test/tests/jacobian/fflux08.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel_constM.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_02.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePS_relperm.i)
- (modules/porous_flow/test/tests/gravity/grav01c.i)
- (modules/porous_flow/test/tests/poro_elasticity/mandel.i)
- (modules/porous_flow/test/tests/sinks/s09_fully_saturated.i)
- (modules/porous_flow/test/tests/energy_conservation/except02.i)
- (modules/porous_flow/test/tests/sinks/s06.i)
- (modules/porous_flow/test/tests/sinks/s09.i)
- (modules/porous_flow/test/tests/mass_conservation/mass08.i)
- (modules/porous_flow/test/tests/jacobian/line_sink02.i)
- (modules/porous_flow/test/tests/jacobian/mass05_nodens.i)
- (modules/porous_flow/test/tests/energy_conservation/heat03.i)
- (modules/porous_flow/test/tests/gravity/grav02b.i)
- (modules/porous_flow/test/tests/poro_elasticity/vol_expansion_poroperm.i)
- (modules/porous_flow/test/tests/actions/addmaterials2.i)
- (modules/porous_flow/test/tests/heterogeneous_materials/vol_expansion_poroperm.i)
- (modules/porous_flow/test/tests/newton_cooling/nc01.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_liquid.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection6.i)
- (modules/porous_flow/test/tests/jacobian/denergy05.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rd03.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except06.i)
- (modules/porous_flow/examples/tutorial/11.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except11.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_liquid_2.i)
- (modules/porous_flow/test/tests/dirackernels/pls02.i)
- (modules/porous_flow/test/tests/jacobian/fflux03.i)
- (modules/porous_flow/test/tests/adaptivity/hex_adaptivity.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except01.i)
- (modules/porous_flow/test/tests/hysteresis/relperm_jac_1.i)
- (modules/porous_flow/test/tests/gravity/grav02c.i)
- (modules/porous_flow/test/tests/jacobian/fflux02.i)
- (modules/porous_flow/test/tests/jacobian/line_sink03.i)
- (modules/porous_flow/test/tests/capillary_pressure/vangenuchten2.i)
- (modules/porous_flow/test/tests/jacobian/pls03.i)
- (modules/porous_flow/test/tests/sinks/injection_production_eg.i)
- (modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined.i)
- (modules/porous_flow/test/tests/buckley_leverett/bl01.i)
- (modules/porous_flow/test/tests/mass_conservation/mass09.i)
- (modules/porous_flow/test/tests/dirackernels/pls01.i)
- (modules/porous_flow/test/tests/hysteresis/2phasePS_relperm_2.i)
- (modules/porous_flow/test/tests/fluidstate/coldwater_injection.i)
- (modules/porous_flow/test/tests/jacobian/mass01.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_gas.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar02.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro04.i)
- (modules/porous_flow/test/tests/mass_conservation/mass10.i)
- (modules/porous_flow/test/tests/energy_conservation/except01.i)
- (modules/porous_flow/test/tests/jacobian/fflux07.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady.i)
- (modules/porous_flow/test/tests/jacobian/brineco2_twophase.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except13.i)
- (modules/porous_flow/test/tests/adaptivity/quad_adaptivity.i)
- (modules/porous_flow/test/tests/jacobian/hcs01.i)
- (modules/porous_flow/test/tests/infiltration_and_drainage/rd01.i)
- (modules/porous_flow/test/tests/mass_conservation/mass07.i)
- (modules/porous_flow/test/tests/dirackernels/theis2.i)
- (modules/porous_flow/test/tests/jacobian/pls02.i)
- (modules/porous_flow/test/tests/hysteresis/1phase_relperm_2.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase.i)
- (modules/porous_flow/test/tests/mass_conservation/mass03.i)
- (modules/porous_flow/test/tests/jacobian/eff_stress04.i)
- (modules/porous_flow/test/tests/poro_elasticity/vol_expansion.i)
- (modules/porous_flow/test/tests/jacobian/denergy02.i)
- (modules/porous_flow/examples/tutorial/11_2D.i)
- (modules/porous_flow/test/tests/newton_cooling/nc06.i)
- (modules/porous_flow/test/tests/gravity/grav01b.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar01.i)
- (modules/porous_flow/test/tests/jacobian/mass04.i)
- (modules/porous_flow/test/tests/energy_conservation/heat02.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_twophase_nonisothermal.i)
- (modules/porous_flow/test/tests/adaptivity/tri3_adaptivity.i)
- (modules/porous_flow/test/tests/gravity/grav02d.i)
- (modules/porous_flow/test/tests/sinks/s04.i)
- (modules/porous_flow/test/tests/gravity/grav02a.i)
- (modules/porous_flow/test/tests/jacobian/line_sink04.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_adaptivity.i)
- (modules/porous_flow/test/tests/dirackernels/bh02.i)
- (modules/porous_flow/test/tests/poroperm/PermTensorFromVar03.i)
- (modules/porous_flow/test/tests/dirackernels/bh07.i)
- (modules/porous_flow/examples/tutorial/10.i)
- (modules/porous_flow/examples/co2_intercomparison/1Dradial/1Dradial.i)
- (modules/porous_flow/test/tests/dirackernels/bh03.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except12.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection2.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro02.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except08.i)
- (modules/porous_flow/test/tests/newton_cooling/nc08.i)
- (modules/porous_flow/test/tests/desorption/desorption02.i)
- (modules/porous_flow/test/tests/jacobian/desorped_mass_vol_exp01.i)
- (modules/porous_flow/test/tests/jacobian/fflux11.i)
- (modules/porous_flow/test/tests/jacobian/mass03.i)
- (modules/porous_flow/test/tests/jacobian/mass01_nodens.i)
- (modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_04.i)
- (modules/porous_flow/test/tests/poroperm/PermFromPoro01.i)
- (modules/porous_flow/test/tests/jacobian/waterncg_liquid.i)
- (modules/porous_flow/test/tests/dirackernels/bh_except07.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection3.i)
- (modules/porous_flow/test/tests/jacobian/basic_advection5.i)
- (modules/porous_flow/test/tests/poro_elasticity/terzaghi_constM.i)
- (modules/porous_flow/test/tests/jacobian/mass10.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp.i)
- (modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
- (modules/porous_flow/test/tests/actions/addmaterials.i)
- (modules/porous_flow/test/tests/jacobian/hcond02.i)
- (modules/porous_flow/examples/coal_mining/coarse_with_fluid.i)
- (modules/porous_flow/test/tests/dirackernels/theis1.i)
- (modules/porous_flow/test/tests/jacobian/fflux04.i)
- (modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d.i)
- (modules/porous_flow/test/tests/dirackernels/bh04.i)
- (modules/porous_flow/test/tests/jacobian/heat_vol_exp01.i)
- (modules/porous_flow/test/tests/jacobian/line_sink01.i)
- (modules/porous_flow/test/tests/sinks/s07.i)
References
- M. Th. van Genuchten.
A closed for equation for predicting the hydraulic conductivity of unsaturated soils.
Soil Sci. Soc., 44:892–898, 1980.[BibTeX]
@article{vangenuchten1980, author = "van Genuchten, M. Th.", title = "A closed for equation for predicting the hydraulic conductivity of unsaturated soils", journal = "Soil Sci. Soc.", volume = "44", pages = "892--898", year = "1980" }
(modules/porous_flow/test/tests/jacobian/pls01.i)
# PorousFlowPiecewiseLinearSink with 1-phase, 1-component
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
max = 0
min = -1
[]
[]
[Kernels]
[dummy]
type = TimeDerivative
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2.2 0 0 0 3.3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[BCs]
[flux]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = pp
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls01
[]
(modules/porous_flow/test/tests/newton_cooling/nc02.i)
# Newton cooling from a bar. 1-phase steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[]
[ICs]
[pressure]
type = FunctionIC
variable = pressure
function = '(2-x/100)*1E6'
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 20
execute_on = timestep_end
[]
[]
[Preconditioning]
active = 'andy'
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol '
petsc_options_value = 'gmres asm lu 100 NONZERO 2 1E-12 1E-15'
[]
[]
[Executioner]
type = Steady
[]
[Outputs]
file_base = nc02
execute_on = timestep_end
exodus = false
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/jacobian/eff_stress02.i)
# 2phase (PS)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[sgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[grad0]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 0
variable = ppwater
[]
[grad1]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.01
[]
[]
[Materials]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except04.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
at_nodes = true # Needed to force exepected error
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
function_of = temperature
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/waterncg_twophase.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions for two phases
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e5
max = 5e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.06
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux01.i)
# 1phase, 1component, constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/pls03.i)
# Test that the upwinding works correctly.
#
# A poly-line sink sits at the centre of the element.
# It has length=4 and weight=0.5, and extracts fluid
# at a constant rate of
# (1 * relative_permeability) kg.m^-1.s^-1
# Since it sits at the centre of the element, it extracts
# equally from each node, so the rate of extraction from
# each node is
# (0.5 * relative_permeability) kg.s^-1
# including the length and weight effects.
#
# There is no fluid flow.
#
# The initial conditions are such that all nodes have
# relative_permeability=0, except for one which has
# relative_permeaility = 1. Therefore, all nodes should
# remain at their initial porepressure, except the one.
#
# The porosity is 0.1, and the elemental volume is 2,
# so the fluid mass at the node in question = 0.2 * density / 4,
# where the 4 is the number of nodes in the element.
# In this simulation density = dens0 * exp(P / bulk), with
# dens0 = 100, and bulk = 20 MPa.
# The initial porepressure P0 = 10 MPa, so the final (after
# 1 second of simulation) is
# P(t=1) = 8.748592 MPa
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 0
xmax = 2
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
#function = if((x<1)&(y<0.5),1E7,-1E7)
function = if((x<1)&(y>0.5),1E7,-1E7)
#function = if((x>1)&(y<0.5),1E7,-1E7)
#function = if((x>1)&(y>0.5),1E7,-1E7)
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 100
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
phase = 0
m = 2
s_res = 0.99
sum_s_res = 0.99
[]
[]
[DiracKernels]
[pls]
type = PorousFlowPolyLineSink
fluid_phase = 0
point_file = pls03.bh
use_relative_permeability = true
line_length = 4
SumQuantityUO = pls_total_outflow_mass
variable = pp
p_or_t_vals = '0 1E7'
fluxes = '1 1'
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p00]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[p01]
type = PointValue
variable = pp
point = '0 1 0'
execute_on = timestep_end
[]
[p20]
type = PointValue
variable = pp
point = '2 0 0'
execute_on = timestep_end
[]
[p21]
type = PointValue
variable = pp
point = '2 1 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
file_base = pls03
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/mass_conservation/mass04.i)
# The sample is a single unit element, with roller BCs on the sides
# and bottom. A constant displacement is applied to the top: disp_z = -0.01*t.
# There is no fluid flow.
# Fluid mass conservation is checked.
#
# Under these conditions
# porepressure = porepressure(t=0) - (Fluid bulk modulus)*log(1 - 0.01*t)
# stress_xx = (bulk - 2*shear/3)*disp_z/L (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*disp_z/L (remember this is effective stress)
# where L is the height of the sample (L=1 in this test)
#
# Parameters:
# Bulk modulus = 2
# Shear modulus = 1.5
# fluid bulk modulus = 0.5
# initial porepressure = 0.1
#
# Desired output:
# zdisp = -0.01*t
# p0 = 0.1 - 0.5*log(1-0.01*t)
# stress_xx = stress_yy = -0.01*t
# stress_zz = -0.04*t
#
# Regarding the "log" - it comes from preserving fluid mass
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
initial_condition = 0.1
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_z
function = -0.01*t
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
use_displaced_mesh = false
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
use_displaced_mesh = true
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 2
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = mass04
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/mass09.i)
# 2phase (PS)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[sgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[mass_sp0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[mass_sp1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.1
log_extension = false
s_scale = 0.9
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d.i)
# 1phase, heat advecting with a moving fluid
# Full upwinding is used
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/gravity/grav02f.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PS), 2components, van Genuchten capillary pressure, constant fluid bulk-moduli for each phase, constant viscosity,
# constant permeability, Corey relative permeabilities with residual saturation
[Mesh]
type = GeneratedMesh
dim = 2
ny = 10
ymax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -10 0'
[]
[Variables]
[ppwater]
initial_condition = 1.5e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[relpermwater]
family = MONOMIAL
order = CONSTANT
[]
[relpermgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[swater]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = swater
[]
[relpermwater]
type = MaterialStdVectorAux
property = PorousFlow_relative_permeability_qp
index = 0
variable = relpermwater
[]
[relpermgas]
type = PorousFlowPropertyAux
property = relperm
phase = 1
variable = relpermgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
pc_max = 2e5
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 1e-3
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 10
viscosity = 1e-5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-11 0 0 0 1e-11 0 0 0 1e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.25
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.35
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_stol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-13 15'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e5
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e4
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02f
exodus = true
perf_graph = true
csv = false
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_05.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 2 phases, 2 components, using flux_limiter_type != None
#
# Here we use snes_check_jacobian instead of snes_type=test. The former just checks the Jacobian for the
# random initial conditions, while the latter checks for u=1 and u=-1
#
# The Jacobian is correct for u=1 and u=-1, but the finite-difference scheme used by snes_type=test gives the
# wrong answer.
# For u=constant, the Kuzmin-Turek scheme adds as much antidiffusion as possible, resulting in a central-difference
# version of advection (flux_limiter = 1). This is correct, and the Jacobian is calculated correctly.
# However, when computing the Jacobian using finite differences, u is increased or decreased at a node.
# This results in that node being at a maximum or minimum, which means no antidiffusion should be added
# (flux_limiter = 0). This corresponds to a full-upwind scheme. So the finite-difference computes the
# Jacobian in the full-upwind scenario, which is incorrect (the original residual = 0, after finite-differencing
# the residual comes from the full-upwind scenario).
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 5
[]
[GlobalParams]
gravity = '1.1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = FunctionIC
variable = ppwater
function = 'if(x<1,0,if(x<4,sin(x-1),1))'
[]
[ppgas]
type = FunctionIC
variable = ppgas
function = 'x*(6-x)/6'
[]
[massfrac_ph0_sp0]
type = FunctionIC
variable = massfrac_ph0_sp0
function = 'x/6'
[]
[massfrac_ph1_sp0]
type = FunctionIC
variable = massfrac_ph1_sp0
function = '1-x/7'
[]
[]
[Kernels]
[flux_ph0_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = advective_flux_calculator_ph0_sp0
[]
[flux_ph0_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppgas
advective_flux_calculator = advective_flux_calculator_ph0_sp1
[]
[flux_ph1_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph0_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp0
[]
[flux_ph1_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph1_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_ph0_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = minmod
phase = 0
fluid_component = 0
[]
[advective_flux_calculator_ph0_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = vanleer
phase = 0
fluid_component = 1
[]
[advective_flux_calculator_ph1_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = mc
phase = 1
fluid_component = 0
[]
[advective_flux_calculator_ph1_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = superbee
phase = 1
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Linear # this is to force convergence even though the nonlinear residual is high: we just care about the Jacobian in this test
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/hysteresis/relperm_jac.i)
# Test of derivatives computed in PorousFlowHystereticRelativePermeability classes along zeroth-order curve
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/dirackernels/bh_except14.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02_huge.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/eff_stress01.i)
# 2phase (PP)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[grad0]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 0
variable = ppwater
[]
[grad1]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Materials]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/brineco2_gas.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single gas phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e4
max = 1e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.9
max = 0.99
variable = zi
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten1.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
value = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
log_extension = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/aux_kernels/properties.i)
# Example of accessing properties using the PorousFlowPropertyAux AuxKernel for
# each phase and fluid component (as required).
[Mesh]
type = GeneratedMesh
dim = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0_water]
order = FIRST
family = LAGRANGE
initial_condition = 0.1
[]
[x0_gas]
order = FIRST
family = LAGRANGE
initial_condition = 0.8
[]
[pressure_gas]
order = CONSTANT
family = MONOMIAL
[]
[capillary_pressure]
order = CONSTANT
family = MONOMIAL
[]
[saturation_water]
order = CONSTANT
family = MONOMIAL
[]
[density_water]
order = CONSTANT
family = MONOMIAL
[]
[density_gas]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_water]
order = CONSTANT
family = MONOMIAL
[]
[viscosity_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1_water]
order = CONSTANT
family = MONOMIAL
[]
[x1_gas]
order = CONSTANT
family = MONOMIAL
[]
[relperm_water]
order = CONSTANT
family = MONOMIAL
[]
[relperm_gas]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_water]
order = CONSTANT
family = MONOMIAL
[]
[enthalpy_gas]
order = CONSTANT
family = MONOMIAL
[]
[energy_water]
order = CONSTANT
family = MONOMIAL
[]
[energy_gas]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[pressure_gas]
type = PorousFlowPropertyAux
variable = pressure_gas
property = pressure
phase = 1
execute_on = timestep_end
[]
[capillary_pressure]
type = PorousFlowPropertyAux
variable = capillary_pressure
property = capillary_pressure
execute_on = timestep_end
[]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation_water
property = saturation
phase = 0
execute_on = timestep_end
[]
[density_water]
type = PorousFlowPropertyAux
variable = density_water
property = density
phase = 0
execute_on = timestep_end
[]
[density_gas]
type = PorousFlowPropertyAux
variable = density_gas
property = density
phase = 1
execute_on = timestep_end
[]
[viscosity_water]
type = PorousFlowPropertyAux
variable = viscosity_water
property = viscosity
phase = 0
execute_on = timestep_end
[]
[viscosity_gas]
type = PorousFlowPropertyAux
variable = viscosity_gas
property = viscosity
phase = 1
execute_on = timestep_end
[]
[relperm_water]
type = PorousFlowPropertyAux
variable = relperm_water
property = relperm
phase = 0
execute_on = timestep_end
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
execute_on = timestep_end
[]
[x1_water]
type = PorousFlowPropertyAux
variable = x1_water
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = timestep_end
[]
[x1_gas]
type = PorousFlowPropertyAux
variable = x1_gas
property = mass_fraction
phase = 1
fluid_component = 1
execute_on = timestep_end
[]
[enthalpy_water]
type = PorousFlowPropertyAux
variable = enthalpy_water
property = enthalpy
phase = 0
execute_on = timestep_end
[]
[enthalpy_gas]
type = PorousFlowPropertyAux
variable = enthalpy_gas
property = enthalpy
phase = 1
execute_on = timestep_end
[]
[energy_water]
type = PorousFlowPropertyAux
variable = energy_water
property = internal_energy
phase = 0
execute_on = timestep_end
[]
[energy_gas]
type = PorousFlowPropertyAux
variable = energy_gas
property = internal_energy
phase = 1
execute_on = timestep_end
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0_water x0_gas'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/mass_conservation/mass02.i)
# checking that the mass postprocessor correctly calculates the mass
# 1phase, 2component, constant porosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[mass_frac_comp0]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = x
variable = pp
[]
[minit]
type = FunctionIC
function = 'x*x'
variable = mass_frac_comp0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = mass_frac_comp0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp mass_frac_comp0'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'mass_frac_comp0'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[total_mass_0]
type = PorousFlowFluidMass
[]
[total_mass_1]
type = PorousFlowFluidMass
fluid_component = 1
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1 1 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mass02
csv = true
[]
(modules/porous_flow/test/tests/fluidstate/coldwater_injection_radial.i)
# Cold water injection into 1D radial hot reservoir (Avdonin, 1964)
#
# To generate results presented in documentation for this problem,
# set xmax = 1000 and nx = 200 in the Mesh block, and dtmax = 1e4
# and end_time = 1e6 in the Executioner block.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0.1
xmax = 5
bias_x = 1.05
[]
[Problem]
rz_coord_axis = Y
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Variables]
[pliquid]
initial_condition = 5e6
[]
[h]
scaling = 1e-6
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliquid
property = enthalpy
temperature = 170
temperature_unit = Celsius
fp = water
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
vals = injection_area
vars = area
value = '-0.1/area'
[]
[]
[BCs]
[source]
type = PorousFlowSink
variable = pliquid
flux_function = injection_rate
boundary = left
[]
[pright]
type = DirichletBC
variable = pliquid
value = 5e6
boundary = right
[]
[hleft]
type = DirichletBC
variable = h
value = 678.52e3
boundary = left
[]
[hright]
type = DirichletBC
variable = h
value = 721.4e3
boundary = right
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliquid
[]
[massflux]
type = PorousFlowAdvectiveFlux
variable = pliquid
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[heatflux]
type = PorousFlowHeatAdvection
variable = h
[]
[heatcond]
type = PorousFlowHeatConduction
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliquid h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
pc_max = 1e6
sat_lr = 0.1
m = 0.5
alpha = 1e-5
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliquid
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
sum_s_res = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2900
specific_heat_capacity = 740
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '20 0 0 0 20 0 0 0 20'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 1e3
nl_abs_tol = 1e-8
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[Postprocessors]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[VectorPostprocessors]
[line]
type = ElementValueSampler
sort_by = x
variable = temperature
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/brineco2_twophase_nonisothermal.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for nonisothermal two phase conditions, including salt as a nonlinear variable
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
xmax = 10
ymax = 10
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[zi]
scaling = 1e-4
[]
[xnacl]
[]
[temperature]
scaling = 1e-7
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e6
max = 4e6
variable = pgas
seed = 1
[]
[z]
type = RandomIC
min = 0.2
max = 0.8
variable = zi
seed = 1
[]
[xnacl]
type = RandomIC
min = 0.01
max = 0.15
variable = xnacl
seed = 1
[]
[temperature]
type = RandomIC
min = 20
max = 80
variable = temperature
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[adv2]
type = PorousFlowAdvectiveFlux
variable = xnacl
fluid_component = 2
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl temperature'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature = temperature
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/porous_flow/test/tests/jacobian/heat_advection01.i)
# 1phase, unsaturated, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pp]
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[pp]
type = RandomIC
variable = pp
max = 0.0
min = -1.0
[]
[]
[Kernels]
[pp]
type = TimeDerivative
variable = pp
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1.1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro05.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * k
# with ln k = A * phi + B
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = ln_k
A = 10.0
B = -18.420681
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten3.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
value = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
s_scale = 0.8
log_extension = false
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/mass_vol_exp03.i)
# Tests the PorousFlowMassVolumetricExpansion kernel
# Fluid with constant bulk modulus, van-Genuchten capillary, HM porosity, multiply_by_density = false
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[ICs]
[disp_x]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_x
[]
[disp_y]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_y
[]
[disp_z]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_z
[]
[p]
type = RandomIC
min = -1
max = 1
variable = porepressure
[]
[]
[BCs]
# necessary otherwise volumetric strain rate will be zero
[disp_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[disp_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'left right'
[]
[disp_z]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'left right'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
displacements = 'disp_x disp_y disp_z'
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
displacements = 'disp_x disp_y disp_z'
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
displacements = 'disp_x disp_y disp_z'
component = 2
[]
[poro]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
variable = porepressure
multiply_by_density = false
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-5
[]
[Outputs]
execute_on = 'timestep_end'
file_base = jacobian2
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e6
log_extension = false
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phasePSVG2.i)
# Pressure pulse in 1D with 2 phases, 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[ppwater]
initial_condition = 2e6
[]
[sgas]
initial_condition = 0.3
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[ppgas]
family = MONOMIAL
order = FIRST
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sgas
fluid_component = 1
[]
[]
[AuxKernels]
[ppgas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-4
sat_lr = 0.3
pc_max = 1e9
log_extension = true
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-15 0 0 0 1e-15 0 0 0 1e-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3e6
variable = ppwater
[]
[rightwater]
type = DirichletBC
boundary = right
value = 2e6
variable = ppwater
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 1e4
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
sort_by = x
variable = 'ppwater ppgas'
start_point = '0 0 0'
end_point = '100 0 0'
num_points = 11
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phasePSVG2
print_linear_residuals = false
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/mass08.i)
# 1phase
# vanGenuchten, constant-bulk density, HM porosity, 1component, unsaturated
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pp]
type = RandomIC
variable = pp
min = -1
max = 1
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/denergy03.i)
# 2phase, 1 component, with solid displacements, time derivative of energy-density, TM porosity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pgas]
[]
[pwater]
[]
[temp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas temp pwater disp_x disp_y disp_z'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
cv = 1.3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
cv = 0.7
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[porosity]
type = PorousFlowPorosity
thermal = true
mechanical = true
porosity_zero = 0.7
thermal_expansion_coeff = 0.5
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.1
density = 0.5
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except15.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/dirackernels/bh_except03.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
at_nodes = true # Needed to force expected error
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/sinks/s10.i)
# apply a basic sink fluxes to all boundaries.
# Sink strength = S kg.m^-2.s^-1
#
# Use fully-saturated physics, with no flow
# (permeability is zero).
# Each finite element is (2m)^3 in size, and
# porosity is 0.125, so each element holds 1 m^3
# of fluid.
# With density = 10 exp(pp)
# then each element holds 10 exp(pp) kg of fluid
#
# Each boundary node that is away from other boundaries
# (ie, not on a mesh corner or edge) therefore holds
# 5 exp(pp)
# kg of fluid, which is just density * porosity * volume_of_node
#
# Each of such nodes are exposed to a sink flux of strength
# S * A
# where A is the area controlled by the node (in this case 4 m^2)
#
# So d(5 exp(pp))/dt = -4S, ie
# exp(pp) = exp(pp0) - 0.8 * S * t
#
# This is therefore similar to s01.i . However, this test is
# run 6 times: one for each boundary. The purpose of this is
# to ensure that the PorousFlowSink BC removes fluid from the
# correct nodes. This is nontrivial because of the upwinding
# and storing of Material Properties at nodes.
[Mesh]
type = GeneratedMesh
dim = 3
nx = 5
ny = 5
nz = 5
xmin = 0
xmax = 10
ymin = 0
ymax = 10
zmin = 0
zmax = 10
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
initial_condition = 1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 10
thermal_expansion = 0
viscosity = 11
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.125
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = left
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.25
end_time = 1
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s10
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/jacobian/mass02.i)
# 1phase
# vanGenuchten, constant-bulk density, constant porosity, 1component
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rd02.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 120
ny = 1
xmin = 0
xmax = 6
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-2 1 10 500 5000 50000'
x = '0 10 100 1000 10000 500000'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[]
[]
[Variables]
[pressure]
initial_condition = 0.0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = DirichletBC
boundary = left
value = 0.0
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 345600
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rd02
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[along_line]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/examples/restart/gas_injection.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, where the mesh used is identical to the mesh used in gravityeq.i, we can use
# the basic restart capability by simply setting the initial condition for porepressure
# using the results from gravityeq.i.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we shift the mesh 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Results can be improved by uniformly refining the initial mesh.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
uniform_refine = 1
[file]
type = FileMeshGenerator
file = gravityeq_out.e
[]
[translate]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0.1 0 0'
input = file
[]
[]
[Problem]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
initial_from_file_var = porepressure
[]
[sat_gas]
initial_condition = 0
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
vals = injection_area
vars = area
value = '-10/area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
[]
[]
[Modules]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedFluidProperties
fp = methane
save_file = false
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
checkpoint = true
[]
(modules/porous_flow/test/tests/hysteresis/1phase_relperm.i)
# Simple example of a 1-phase situation with hysteretic relative permeability. Water is removed and added to the system in order to observe the hysteresis
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 1
number_fluid_components = 1
porous_flow_vars = 'pp'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass_conservation]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[]
[DiracKernels]
[pump]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = flux
point = '0.5 0 0'
variable = pp
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[relperm]
family = MONOMIAL
order = CONSTANT
[]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat]
type = PorousFlowPropertyAux
variable = sat
property = saturation
[]
[relperm]
type = PorousFlowPropertyAux
variable = relperm
property = relperm
phase = 0
[]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[pc_calculator]
type = PorousFlow1PhaseP
capillary_pressure = pc
porepressure = pp
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_material]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[]
[Postprocessors]
[flux]
type = FunctionValuePostprocessor
function = 'if(t <= 5, -10, 10)'
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[sat]
type = PointValue
point = '0 0 0'
variable = sat
[]
[relperm]
type = PointValue
point = '0 0 0'
variable = relperm
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.5
end_time = 10
nl_abs_tol = 1E-10
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/gravity/grav01d.i)
# Test illustrating that PorousFlow allows block-restricted relative permeabilities and capillarities
# and automatically adds appropriate Joiners.
# Physically, this test is checking that gravity head is established
# for 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[define_block1]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '-1 -1 -1'
top_right = '-0.5 1 1'
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[Kernels]
[dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 2 -1 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc_0]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[pc_1]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 2
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss_0]
type = PorousFlow1PhaseP
block = 0
porepressure = pp
capillary_pressure = pc_0
[]
[ppss_1]
type = PorousFlow1PhaseP
block = 1
porepressure = pp
capillary_pressure = pc_1
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_0]
type = PorousFlowRelativePermeabilityCorey
block = 0
n = 1
phase = 0
[]
[relperm_1]
type = PorousFlowRelativePermeabilityCorey
block = 1
n = 2
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E6
end_time = 1E6
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01d
csv = true
[]
(modules/porous_flow/test/tests/jacobian/mass_vol_exp02.i)
# Tests the PorousFlowMassVolumetricExpansion kernel
# Fluid with constant bulk modulus, van-Genuchten capillary, HM porosity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[ICs]
[disp_x]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_x
[]
[disp_y]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_y
[]
[disp_z]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_z
[]
[p]
type = RandomIC
min = -1
max = 1
variable = porepressure
[]
[]
[BCs]
# necessary otherwise volumetric strain rate will be zero
[disp_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[disp_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'left right'
[]
[disp_z]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'left right'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
displacements = 'disp_x disp_y disp_z'
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
displacements = 'disp_x disp_y disp_z'
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
displacements = 'disp_x disp_y disp_z'
component = 2
[]
[poro]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
variable = porepressure
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-5
[]
[Outputs]
execute_on = 'timestep_end'
file_base = jacobian2
exodus = false
[]
(modules/porous_flow/test/tests/adaptivity/tet4_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
elem_type = TET4
dim = 3
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
execute_on = 'final'
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/jacobian/fflux13.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
# using harmonic-mean mobility
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
fallback_scheme = harmonic
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
full_upwind_threshold = 0
fallback_scheme = harmonic
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/eff_stress03.i)
# 2phase (PP)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
# RZ coordinates
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[grad0]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 0
variable = ppwater
[]
[grad1]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Materials]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/mass_conservation/mass01.i)
# checking that the mass postprocessor correctly calculates the mass
# 1phase, 1component, constant porosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = x
variable = pp
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[total_mass]
type = PorousFlowFluidMass
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1 1 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mass01
csv = true
[]
(modules/porous_flow/test/tests/jacobian/mass10_nodens.i)
# 1phase
# vanGenuchten, constant-bulk density, HM porosity, 1component, unsaturated
# multiply_by_density = false
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pp]
type = RandomIC
variable = pp
min = -1
max = 1
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
strain_at_nearest_qp = true
multiply_by_density = false
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
strain_at_nearest_qp = true
[]
[nearest_qp]
type = PorousFlowNearestQp
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/radioactive_decay/radioactive_decay01.i)
# checking radioactive decay
# 1phase, 1component, constant porosity
#
# Note that we don't get mass = mass0 * exp(-Lambda * t)
# because of the time discretisation. We are solving
# the equation
# (mass - mass0)/dt = -Lambda * mass
# which has the solution
# mass = mass0/(1 + Lambda * dt)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = 10
variable = pp
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[decay]
type = PorousFlowMassRadioactiveDecay
fluid_component = 0
variable = pp
decay_rate = 2.0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'timestep_end'
[]
[total_mass0]
type = PorousFlowFluidMass
execute_on = 'timestep_begin'
[]
[should_be_zero]
type = FunctionValuePostprocessor
function = should_be_0
[]
[]
[Functions]
[should_be_0]
type = ParsedFunction
vars = 'm0 m rate dt'
vals = 'total_mass0 total_mass 2.0 1'
value = 'm-m0/(1.0+rate*dt)'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
num_steps = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = radioactive_decay01
csv = true
[]
(modules/porous_flow/test/tests/sinks/s08.i)
# apply a sink flux on just one component of a 3-component, 2-phase system and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater frac_ph0_c0 pgas'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pwater]
[]
[frac_ph0_c0]
initial_condition = 0.3
[]
[pgas]
[]
[]
[ICs]
[pwater]
type = FunctionIC
variable = pwater
function = y
[]
[pgas]
type = FunctionIC
variable = pgas
function = y+3
[]
[]
[Kernels]
[mass_c0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac_ph0_c0
[]
[mass_c1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pwater
[]
[mass_c2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = pgas
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2.3
density0 = 1.5
thermal_expansion = 0
viscosity = 2.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_ph0_c0 frac_ph0_c1 frac_ph1_c0 frac_ph1_c1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[]
[AuxVariables]
[flux_out]
[]
[frac_ph0_c1]
initial_condition = 0.35
[]
[frac_ph1_c0]
initial_condition = 0.1
[]
[frac_ph1_c1]
initial_condition = 0.8
[]
[]
[Functions]
[mass1_00]
type = ParsedFunction
value = 'fgas*vol*por*dens0gas*exp(pgas/bulkgas)*(1-pow(1+pow(al*(pgas-pwater),1.0/(1-m)),-m))+fwater*vol*por*dens0water*exp(pwater/bulkwater)*(pow(1+pow(al*(pgas-pwater),1.0/(1-m)),-m))'
vars = 'vol por dens0gas pgas pwater bulkgas al m dens0water bulkwater fgas fwater'
vals = '0.25 0.1 1.1 pgas_00 pwater_00 1.3 1.1 0.5 1.5 2.3 frac_ph1_c1_00 frac_ph0_c1_00'
[]
[expected_mass_change1_00]
type = ParsedFunction
value = 'frac*fcn*area*dt*pow(1-pow(1+pow(al*(pgas-pwater),1.0/(1-m)),-m), 2)'
vars = 'frac fcn area dt pgas pwater al m'
vals = 'frac_ph1_c1_00 100 0.5 1E-3 pgas_00 pwater_00 1.1 0.5'
[]
[mass1_00_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm1_00_prev del_m1_00'
[]
[]
[Postprocessors]
[total_mass_comp0]
type = PorousFlowFluidMass
fluid_component = 0
[]
[total_mass_comp1]
type = PorousFlowFluidMass
fluid_component = 1
[]
[total_mass_comp2]
type = PorousFlowFluidMass
fluid_component = 2
[]
[frac_ph1_c1_00]
type = PointValue
point = '0 0 0'
variable = frac_ph1_c1
execute_on = 'initial timestep_end'
[]
[frac_ph0_c1_00]
type = PointValue
point = '0 0 0'
variable = frac_ph0_c1
execute_on = 'initial timestep_end'
[]
[flux_00]
type = PointValue
point = '0 0 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[pgas_00]
type = PointValue
point = '0 0 0'
variable = pgas
execute_on = 'initial timestep_end'
[]
[pwater_00]
type = PointValue
point = '0 0 0'
variable = pwater
execute_on = 'initial timestep_end'
[]
[m1_00]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'initial timestep_end'
[]
[m1_00_prev]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m1_00]
type = FunctionValuePostprocessor
function = expected_mass_change1_00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m1_00_expect]
type = FunctionValuePostprocessor
function = mass1_00_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux_ph1_c1]
type = PorousFlowSink
boundary = 'left'
variable = pwater # sink applied to the mass_c1 Kernel
use_mobility = false
use_relperm = true
mass_fraction_component = 1
fluid_phase = 1
flux_function = 100
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 100 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.01
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s08
exodus = true
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except09.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
compute_enthalpy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
use_enthalpy = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/examples/coal_mining/fine_with_fluid.i)
#################################################################
#
# NOTE:
# The mesh for this model is too large for the MOOSE repository
# so is kept in the the large_media submodule
#
#################################################################
#
# Strata deformation and fluid flow aaround a coal mine - 3D model
#
# A "half model" is used. The mine is 400m deep and
# just the roof is studied (-400<=z<=0). The mining panel
# sits between 0<=x<=150, and 0<=y<=1000, so this simulates
# a coal panel that is 300m wide and 1000m long. The outer boundaries
# are 1km from the excavation boundaries.
#
# The excavation takes 0.5 years.
#
# The boundary conditions for this simulation are:
# - disp_x = 0 at x=0 and x=1150
# - disp_y = 0 at y=-1000 and y=1000
# - disp_z = 0 at z=-400, but there is a time-dependent
# Young modulus that simulates excavation
# - wc_x = 0 at y=-1000 and y=1000
# - wc_y = 0 at x=0 and x=1150
# - no flow at x=0, z=-400 and z=0
# - fixed porepressure at y=-1000, y=1000 and x=1150
# That is, rollers on the sides, free at top,
# and prescribed at bottom in the unexcavated portion.
#
# A single-phase unsaturated fluid is used.
#
# The small strain formulation is used.
#
# All stresses are measured in MPa, and time units are measured in years.
#
# The initial porepressure is hydrostatic with P=0 at z=0, so
# Porepressure ~ - 0.01*z MPa, where the fluid has density 1E3 kg/m^3 and
# gravity = = 10 m.s^-2 = 1E-5 MPa m^2/kg.
# To be more accurate, i use
# Porepressure = -bulk * log(1 + g*rho0*z/bulk)
# where bulk=2E3 MPa and rho0=1Ee kg/m^3.
# The initial stress is consistent with the weight force from undrained
# density 2500 kg/m^3, and fluid porepressure, and a Biot coefficient of 0.7, ie,
# stress_zz^effective = 0.025*z + 0.7 * initial_porepressure
# The maximum and minimum principal horizontal effective stresses are
# assumed to be equal to 0.8*stress_zz.
#
# Material properties:
# Young's modulus = 8 GPa
# Poisson's ratio = 0.25
# Cosserat layer thickness = 1 m
# Cosserat-joint normal stiffness = large
# Cosserat-joint shear stiffness = 1 GPa
# MC cohesion = 2 MPa
# MC friction angle = 35 deg
# MC dilation angle = 8 deg
# MC tensile strength = 1 MPa
# MC compressive strength = 100 MPa
# WeakPlane cohesion = 0.1 MPa
# WeakPlane friction angle = 30 deg
# WeakPlane dilation angle = 10 deg
# WeakPlane tensile strength = 0.1 MPa
# WeakPlane compressive strength = 100 MPa softening to 1 MPa at strain = 1
# Fluid density at zero porepressure = 1E3 kg/m^3
# Fluid bulk modulus = 2E3 MPa
# Fluid viscosity = 1.1E-3 Pa.s = 1.1E-9 MPa.s = 3.5E-17 MPa.year
#
[GlobalParams]
perform_finite_strain_rotations = false
displacements = 'disp_x disp_y disp_z'
Cosserat_rotations = 'wc_x wc_y wc_z'
PorousFlowDictator = dictator
biot_coefficient = 0.7
[]
[Mesh]
[file]
type = FileMeshGenerator
file = fine.e
[]
[xmin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = xmin
normal = '-1 0 0'
input = file
[]
[xmax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = xmax
normal = '1 0 0'
input = xmin
[]
[ymin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = ymin
normal = '0 -1 0'
input = xmax
[]
[ymax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
new_boundary = ymax
normal = '0 1 0'
input = ymin
[]
[zmax]
type = SideSetsAroundSubdomainGenerator
block = 30
new_boundary = zmax
normal = '0 0 1'
input = ymax
[]
[zmin]
type = SideSetsAroundSubdomainGenerator
block = 2
new_boundary = zmin
normal = '0 0 -1'
input = zmax
[]
[excav]
type = SubdomainBoundingBoxGenerator
input = zmin
block_id = 1
bottom_left = '0 0 -400'
top_right = '150 1000 -397'
[]
[roof]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
input = excav
new_boundary = roof
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[wc_x]
[]
[wc_y]
[]
[porepressure]
scaling = 1E-5
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = ini_pp
[]
[]
[Kernels]
[cx_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[cy_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[cz_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_z
component = 2
[]
[x_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_x
displacements = 'wc_x wc_y wc_z'
component = 0
base_name = couple
[]
[y_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_y
displacements = 'wc_x wc_y wc_z'
component = 1
base_name = couple
[]
[x_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_x
component = 0
[]
[y_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_y
component = 1
[]
[gravity]
type = Gravity
use_displaced_mesh = false
variable = disp_z
value = -10E-6 # remember this is in MPa
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
use_displaced_mesh = false
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
use_displaced_mesh = false
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
use_displaced_mesh = false
variable = porepressure
gravity = '0 0 -10E-6'
fluid_component = 0
[]
[]
[AuxVariables]
[saturation]
order = CONSTANT
family = MONOMIAL
[]
[darcy_x]
order = CONSTANT
family = MONOMIAL
[]
[darcy_y]
order = CONSTANT
family = MONOMIAL
[]
[darcy_z]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[wc_z]
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zx]
order = CONSTANT
family = MONOMIAL
[]
[stress_zy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[perm_xx]
order = CONSTANT
family = MONOMIAL
[]
[perm_yy]
order = CONSTANT
family = MONOMIAL
[]
[perm_zz]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation
property = saturation
phase = 0
execute_on = timestep_end
[]
[darcy_x]
type = PorousFlowDarcyVelocityComponent
variable = darcy_x
gravity = '0 0 -10E-6'
component = x
[]
[darcy_y]
type = PorousFlowDarcyVelocityComponent
variable = darcy_y
gravity = '0 0 -10E-6'
component = y
[]
[darcy_z]
type = PorousFlowDarcyVelocityComponent
variable = darcy_z
gravity = '0 0 -10E-6'
component = z
[]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
execute_on = timestep_end
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[stress_yx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[stress_zy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[total_strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[total_strain_xy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[total_strain_xz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[total_strain_yx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[total_strain_yz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[total_strain_zx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[total_strain_zy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[total_strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[perm_xx]
type = PorousFlowPropertyAux
property = permeability
variable = perm_xx
row = 0
column = 0
execute_on = timestep_end
[]
[perm_yy]
type = PorousFlowPropertyAux
property = permeability
variable = perm_yy
row = 1
column = 1
execute_on = timestep_end
[]
[perm_zz]
type = PorousFlowPropertyAux
property = permeability
variable = perm_zz
row = 2
column = 2
execute_on = timestep_end
[]
[mc_shear]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_internal_parameter
variable = mc_shear
execute_on = timestep_end
[]
[mc_tensile]
type = MaterialStdVectorAux
index = 1
property = mc_plastic_internal_parameter
variable = mc_tensile
execute_on = timestep_end
[]
[wp_shear]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_internal_parameter
variable = wp_shear
execute_on = timestep_end
[]
[wp_tensile]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_internal_parameter
variable = wp_tensile
execute_on = timestep_end
[]
[mc_shear_f]
type = MaterialStdVectorAux
index = 6
property = mc_plastic_yield_function
variable = mc_shear_f
execute_on = timestep_end
[]
[mc_tensile_f]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_yield_function
variable = mc_tensile_f
execute_on = timestep_end
[]
[wp_shear_f]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_yield_function
variable = wp_shear_f
execute_on = timestep_end
[]
[wp_tensile_f]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_yield_function
variable = wp_tensile_f
execute_on = timestep_end
[]
[]
[BCs]
[no_x]
type = DirichletBC
variable = disp_x
boundary = 'xmin xmax'
value = 0.0
[]
[no_y]
type = DirichletBC
variable = disp_y
boundary = 'ymin ymax'
value = 0.0
[]
[no_z]
type = DirichletBC
variable = disp_z
boundary = zmin
value = 0.0
[]
[no_wc_x]
type = DirichletBC
variable = wc_x
boundary = 'ymin ymax'
value = 0.0
[]
[no_wc_y]
type = DirichletBC
variable = wc_y
boundary = 'xmin xmax'
value = 0.0
[]
[fix_porepressure]
type = FunctionDirichletBC
variable = porepressure
boundary = 'ymin ymax xmax'
function = ini_pp
[]
[roof_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
pt_vals = '-1E3 1E3'
multipliers = '-1 1'
fluid_phase = 0
flux_function = roof_conductance
boundary = roof
[]
[roof]
type = StickyBC
variable = disp_z
min_value = -3.0
boundary = roof
[]
[]
[Functions]
[ini_pp]
type = ParsedFunction
vars = 'bulk p0 g rho0'
vals = '2E3 0.0 1E-5 1E3'
value = '-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)'
[]
[ini_xx]
type = ParsedFunction
vars = 'bulk p0 g rho0 biot'
vals = '2E3 0.0 1E-5 1E3 0.7'
value = '0.8*(2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)))'
[]
[ini_zz]
type = ParsedFunction
vars = 'bulk p0 g rho0 biot'
vals = '2E3 0.0 1E-5 1E3 0.7'
value = '2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk))'
[]
[excav_sideways]
type = ParsedFunction
vars = 'end_t ymin ymax minval maxval slope'
vals = '0.5 0 1000.0 1E-9 1 10'
# excavation face at ymin+(ymax-ymin)*min(t/end_t,1)
# slope is the distance over which the modulus reduces from maxval to minval
value = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,if(y<ymin+(ymax-ymin)*min(t/end_t,1)+slope,minval+(maxval-minval)*(y-(ymin+(ymax-ymin)*min(t/end_t,1)))/slope,maxval))'
[]
[density_sideways]
type = ParsedFunction
vars = 'end_t ymin ymax minval maxval'
vals = '0.5 0 1000.0 0 2500'
value = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,maxval)'
[]
[roof_conductance]
type = ParsedFunction
vars = 'end_t ymin ymax maxval minval'
vals = '0.5 0 1000.0 1E7 0'
value = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),maxval,minval)'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1 # MPa^-1
[]
[mc_coh_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.99 # MPa
value_residual = 2.01 # MPa
rate = 1.0
[]
[mc_fric]
type = TensorMechanicsHardeningConstant
value = 0.61 # 35deg
[]
[mc_dil]
type = TensorMechanicsHardeningConstant
value = 0.15 # 8deg
[]
[mc_tensile_str_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.0 # MPa
value_residual = 1.0 # MPa
rate = 1.0
[]
[mc_compressive_str]
type = TensorMechanicsHardeningCubic
value_0 = 100 # Large!
value_residual = 100
internal_limit = 0.1
[]
[wp_coh_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_tan_fric]
type = TensorMechanicsHardeningConstant
value = 0.26 # 15deg
[]
[wp_tan_dil]
type = TensorMechanicsHardeningConstant
value = 0.18 # 10deg
[]
[wp_tensile_str_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_compressive_str_soften]
type = TensorMechanicsHardeningCubic
value_0 = 100
value_residual = 1
internal_limit = 1.0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 3.5E-17
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity_for_aux]
type = PorousFlowPorosity
at_nodes = false
fluid = true
mechanical = true
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_bulk]
type = PorousFlowPorosity
fluid = true
mechanical = true
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_excav]
type = PorousFlowPorosityConst
block = 1
porosity = 1.0
[]
[permeability_bulk]
type = PorousFlowPermeabilityKozenyCarman
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
poroperm_function = kozeny_carman_phi0
k0 = 1E-15
phi0 = 0.02
n = 2
m = 2
[]
[permeability_excav]
type = PorousFlowPermeabilityConst
block = 1
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.4
sum_s_res = 0.4
phase = 0
[]
[elasticity_tensor_0]
type = ComputeLayeredCosseratElasticityTensor
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
[]
[elasticity_tensor_1]
type = ComputeLayeredCosseratElasticityTensor
block = 1
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
elasticity_tensor_prefactor = excav_sideways
[]
[strain]
type = ComputeCosseratIncrementalSmallStrain
eigenstrain_names = ini_stress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
eigenstrain_name = ini_stress
initial_stress = 'ini_xx 0 0 0 ini_xx 0 0 0 ini_zz'
[]
[stress_0]
type = ComputeMultipleInelasticCosseratStress
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
inelastic_models = 'mc wp'
cycle_models = true
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[stress_1]
type = ComputeMultipleInelasticCosseratStress
block = 1
inelastic_models = ''
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[mc]
type = CappedMohrCoulombCosseratStressUpdate
warn_about_precision_loss = false
host_youngs_modulus = 8E3
host_poissons_ratio = 0.25
base_name = mc
tensile_strength = mc_tensile_str_strong_harden
compressive_strength = mc_compressive_str
cohesion = mc_coh_strong_harden
friction_angle = mc_fric
dilation_angle = mc_dil
max_NR_iterations = 100000
smoothing_tol = 0.1 # MPa # Must be linked to cohesion
yield_function_tol = 1E-9 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0
[]
[wp]
type = CappedWeakPlaneCosseratStressUpdate
warn_about_precision_loss = false
base_name = wp
cohesion = wp_coh_harden
tan_friction_angle = wp_tan_fric
tan_dilation_angle = wp_tan_dil
tensile_strength = wp_tensile_str_harden
compressive_strength = wp_compressive_str_soften
max_NR_iterations = 10000
tip_smoother = 0.05
smoothing_tol = 0.05 # MPa # Note, this must be tied to cohesion, otherwise get no possible return at cone apex
yield_function_tol = 1E-11 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0E-3
[]
[undrained_density_0]
type = GenericConstantMaterial
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
prop_names = density
prop_values = 2500
[]
[undrained_density_1]
type = GenericFunctionMaterial
block = 1
prop_names = density
prop_values = density_sideways
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[min_roof_disp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = disp_z
[]
[min_roof_pp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = porepressure
[]
[min_surface_disp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = disp_z
[]
[min_surface_pp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = porepressure
[]
[max_perm_zz]
type = ElementExtremeValue
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30'
variable = perm_zz
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
# best overall
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
# best if you don't have mumps:
#petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' asm 2 lu gmres 200'
# very basic:
#petsc_options_iname = '-pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' bjacobi gmres 200'
line_search = bt
nl_abs_tol = 1e-3
nl_rel_tol = 1e-5
l_max_its = 200
nl_max_its = 30
start_time = 0.0
dt = 0.0025
end_time = 0.5
[]
[Outputs]
interval = 1
print_linear_residuals = true
exodus = true
csv = true
console = true
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_fullsat.i)
# 1phase, heat advecting with a moving fluid
# Full upwinding is used, as implemented by the PorousFlowFullySaturatedUpwindHeatAdvection added
# In this case, the results should be identical to the case when the PorousFlowHeatAdvection Kernel is used.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[advection]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowFullySaturatedUpwindHeatAdvection
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/jacobian/heat_advection02.i)
# 2phase, unsaturated, heat advection
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pgas]
[]
[pwater]
[]
[]
[ICs]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temp
gravity = '1 2 3'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pgas pwater'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.8
density0 = 0.7
thermal_expansion = 0
viscosity = 1.3
cv = 1.6
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/gravity/grav01a.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 1.2 0 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[pp_00]
type = PointValue
variable = pp
point = '0 0 0'
[]
[pp_01]
type = PointValue
variable = pp
point = '-0.1 0 0'
[]
[pp_02]
type = PointValue
variable = pp
point = '-0.2 0 0'
[]
[pp_03]
type = PointValue
variable = pp
point = '-0.3 0 0'
[]
[pp_04]
type = PointValue
variable = pp
point = '-0.4 0 0'
[]
[pp_05]
type = PointValue
variable = pp
point = '-0.5 0 0'
[]
[pp_06]
type = PointValue
variable = pp
point = '-0.6 0 0'
[]
[pp_07]
type = PointValue
variable = pp
point = '-0.7 0 0'
[]
[pp_08]
type = PointValue
variable = pp
point = '-0.8 0 0'
[]
[pp_09]
type = PointValue
variable = pp
point = '-0.9 0 0'
[]
[pp_10]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01a
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/desorption/desorption01.i)
# Illustrates desorption works as planned.
#
# A mesh contains 3 elements in arranged in a line.
# The central element contains desorped fluid.
# This desorps to the nodes of that element.
#
# In the central element, of volume V, the following occurs.
# The initial porepressure=1, and concentration=1.
# The initial mass of fluid is
# V * (2 * porosity * density + (1 - porosity) * concentration)
# = V * 1.289547
# Notice the factor of "2" in the porespace contribution:
# it is because the porepressure is evaluated at nodes, so
# the nodes on the exterior of the centre_block have
# nodal-volume contributions from the elements not in centre_block.
#
# The mass-conservation equation reads
# 2 * porosity * density + (1 - porosity) * concentration = 1.289547
# and the desorption equation reads
# d( (1-porosity)C )/dt = - (1/tau)(C - dens_L * P / (P_L + P))
# where C = concentration, P = porepressure, P_L = Langmuir pressure
# dens_L = Langmuir density, tau = time constant.
# Using the mass-conservation equation in the desorption equation
# yields a nonlinear equation of P. For dt=1, and the numerical values
# given below this yields
# P = 1.83697
# and
# C = 0.676616
# The desired result is achieved by MOOSE
[Mesh]
type = FileMesh
file = three_eles.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[conc]
family = MONOMIAL
order = CONSTANT
block = centre_block
[]
[]
[ICs]
[p_ic]
type = ConstantIC
variable = pp
value = 1.0
[]
[conc_ic]
type = ConstantIC
variable = conc
value = 1.0
block = centre_block
[]
[]
[Kernels]
[porespace_mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[desorped_mass_dot]
type = PorousFlowDesorpedMassTimeDerivative
block = centre_block
conc_var = conc
variable = pp
[]
[desorped_mass_dot_conc_var]
type = PorousFlowDesorpedMassTimeDerivative
block = centre_block
conc_var = conc
variable = conc
[]
[flow_from_matrix]
type = DesorptionFromMatrix
block = centre_block
variable = conc
pressure_var = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp conc'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
viscosity = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[lang_stuff]
type = LangmuirMaterial
block = centre_block
one_over_adsorption_time_const = 10.0
one_over_desorption_time_const = 10.0
langmuir_density = 1
langmuir_pressure = 1
pressure_var = pp
conc_var = conc
[]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/dirackernels/bh05.i)
# unsaturated
# injection
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '500 500 1E1'
x = '4000 5000 6500'
[]
[]
[Variables]
[pp]
initial_condition = -2E5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh03.bh
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
character = -1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 6500
solve_type = NEWTON
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bh05
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro03.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * B * exp(A * phi)
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = exp_k
A = 10
B = 1e-8
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/jacobian/mass05.i)
# 2phase (PP)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 3components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[mass_sp0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[mass_sp1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[mass_sp2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = massfrac_ph0_sp0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/sinks/s05.i)
# apply a half-gaussian sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1.4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Functions]
[mass10]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
vars = 'vol por dens0 pp bulk al m'
vals = '0.25 0.1 1.1 p10 1.3 1.1 0.5'
[]
[rate10]
type = ParsedFunction
value = 'if(pp>center,fcn,fcn*exp(-0.5*(pp-center)*(pp-center)/sd/sd))'
vars = 'fcn pp center sd'
vals = '6 p10 0.9 0.5'
[]
[mass10_expect]
type = ParsedFunction
value = 'mass_prev-rate*area*dt'
vars = 'mass_prev rate area dt'
vals = 'm10_prev m10_rate 0.5 2E-3'
[]
[mass11]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
vars = 'vol por dens0 pp bulk al m'
vals = '0.25 0.1 1.1 p11 1.3 1.1 0.5'
[]
[rate11]
type = ParsedFunction
value = 'if(pp>center,fcn,fcn*exp(-0.5*(pp-center)*(pp-center)/sd/sd))'
vars = 'fcn pp center sd'
vals = '6 p11 0.9 0.5'
[]
[mass11_expect]
type = ParsedFunction
value = 'mass_prev-rate*area*dt'
vars = 'mass_prev rate area dt'
vals = 'm11_prev m11_rate 0.5 2E-3'
[]
[]
[Postprocessors]
[flux10]
type = PointValue
variable = flux_out
point = '1 0 0'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'initial timestep_end'
[]
[m10_prev]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m10_rate]
type = FunctionValuePostprocessor
function = rate10
execute_on = 'timestep_end'
[]
[m10_expect]
type = FunctionValuePostprocessor
function = mass10_expect
execute_on = 'timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'initial timestep_end'
[]
[m11_prev]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m11_rate]
type = FunctionValuePostprocessor
function = rate11
execute_on = 'timestep_end'
[]
[m11_expect]
type = FunctionValuePostprocessor
function = mass11_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowHalfGaussianSink
boundary = 'right'
max = 6
sd = 0.5
center = 0.9
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E-3
end_time = 6E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s05
[console]
type = Console
execute_on = 'nonlinear linear'
interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
interval = 3
[]
[]
(modules/porous_flow/test/tests/aux_kernels/darcy_velocity.i)
# checking that the PorousFlowDarcyVelocityComponent AuxKernel works as expected
# for the fully-saturated case (relative-permeability = 1)
# There is one element, of unit size. The pressures and fluid densities at the qps are:
# (x,y,z)=( 0.211325 , 0.211325 , 0.211325 ). p = 1.479 rho = 3.217
# (x,y,z)=( 0.788675 , 0.211325 , 0.211325 ). p = 2.057 rho = 4.728
# (x,y,z)=( 0.211325 , 0.788675 , 0.211325 ). p = 2.634 rho = 6.947
# (x,y,z)=( 0.788675 , 0.788675 , 0.211325 ). p = 3.211 rho = 10.208
# (x,y,z)=( 0.211325 , 0.211325 , 0.788675 ). p = 3.789 rho = 15.001
# (x,y,z)=( 0.788675 , 0.211325 , 0.788675 ). p = 4.367 rho = 22.043
# (x,y,z)=( 0.211325 , 0.788675 , 0.788675 ). p = 4.943 rho = 32.392
# (x,y,z)=( 0.788675 , 0.788675 , 0.788675 ). p = 5.521 rho = 47.599
# Average density = 17.7668
# grad(P) = (1, 2, 4)
# with permeability = diag(1, 2, 3) and gravity = (1, -2, 3) and viscosity = 3.2
# So Darcy velocity = (5.23963, -23.4585, 46.2192)
[Mesh]
type = GeneratedMesh
dim = 3
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '1 -2 3'
[]
[Variables]
[pp]
[]
[]
[ICs]
[pinit]
type = FunctionIC
function = x+2*y+4*z
variable = pp
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[AuxVariables]
[vel_x]
order = CONSTANT
family = MONOMIAL
[]
[vel_y]
order = CONSTANT
family = MONOMIAL
[]
[vel_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[vel_x]
type = PorousFlowDarcyVelocityComponent
variable = vel_x
component = x
fluid_phase = 0
[]
[vel_y]
type = PorousFlowDarcyVelocityComponent
variable = vel_y
component = y
fluid_phase = 0
[]
[vel_z]
type = PorousFlowDarcyVelocityComponent
variable = vel_z
component = z
fluid_phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
viscosity = 3.2
density0 = 1.2
thermal_expansion = 0
[]
[]
[]
[Postprocessors]
[vel_x]
type = PointValue
variable = vel_x
point = '0.5 0.5 0.5'
[]
[vel_y]
type = PointValue
variable = vel_y
point = '0.5 0.5 0.5'
[]
[vel_z]
type = PointValue
variable = vel_z
point = '0.5 0.5 0.5'
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-16
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = darcy_velocity
csv = true
[]
(modules/porous_flow/test/tests/jacobian/fflux12.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, FLAC relative perm with a cubic, nonzero gravity, unsaturated with VG
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = -1.0
max = 0.0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1 # small so that most effective saturations are close to 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 10
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/sinks/s01.i)
# apply a sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)'
vars = 'vol por dens0 pp bulk'
vals = '0.25 0.1 1.1 p00 1.3'
[]
[mass01]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)'
vars = 'vol por dens0 pp bulk'
vals = '0.25 0.1 1.1 p01 1.3'
[]
[expected_mass_change00]
type = ParsedFunction
value = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
vars = 'fcn perm dens0 pp bulk visc area dt'
vals = '6 1 1 0 1.3 1 0.5 1E-3'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = false
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 1E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s01
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'initial timestep_end'
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined_constM.i)
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source, s, has units m^3/second/m^3. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/second/m^3. The ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
#
# Expect
# disp_z = 0.3*10*s*t/((2 + 4*1.5/3) + 0.3^2*10) = 0.612245*s*t
# porepressure = 10*(s*t - 0.3*0.612245*s*t) = 8.163265*s*t
# stress_xx = (2 - 2*1.5/3)*0.612245*s*t = 0.612245*s*t
# stress_zz = (2 + 4*shear/3)*0.612245*s*t = 2.44898*s*t
# The relationship between the constant poroelastic source
# s (m^3/second/m^3) and the PorousFlow source, S (kg/second/m^3) is
# S = fluid_density * s = s * exp(porepressure/fluid_bulk)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = '0.1*exp(8.163265306*0.1*t/3.3333333333)'
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
constant_fluid_bulk_modulus = 3.3333333333
constant_biot_modulus = 10.0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
value = a/b
vars = 'a b'
vals = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
value = a/b
vars = 'a b'
vals = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
value = a/b
vars = 'a b'
vals = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined_constM
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/sinks/s03.i)
# apply a sink flux with use_relperm=true and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -y
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
vars = 'vol por dens0 pp bulk al m'
vals = '0.25 0.1 1.1 p00 1.3 1.1 0.5'
[]
[sat00]
type = ParsedFunction
value = 'pow(1+pow(-al*pp,1.0/(1-m)),-m)'
vars = 'pp al m'
vals = 'p00 1.1 0.5'
[]
[mass01]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
vars = 'vol por dens0 pp bulk al m'
vals = '0.25 0.1 1.1 p01 1.3 1.1 0.5'
[]
[expected_mass_change00]
type = ParsedFunction
value = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area*dt'
vars = 'fcn perm dens0 pp bulk visc area dt al m'
vals = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[expected_mass_change01]
type = ParsedFunction
value = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area*dt'
vars = 'fcn perm dens0 pp bulk visc area dt al m'
vals = '6 0.2 1.1 p01 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[mass00_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm00_prev del_m00'
[]
[mass01_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm01_prev del_m01'
[]
[sat01]
type = ParsedFunction
value = 'pow(1+pow(-al*pp,1.0/(1-m)),-m)'
vars = 'pp al m'
vals = 'p01 1.1 0.5'
[]
[expected_mass_change_rate]
type = ParsedFunction
value = 'fcn*pow(pow(1+pow(-al*pp,1.0/(1-m)),-m),2)*area'
vars = 'fcn perm dens0 pp bulk visc area dt al m'
vals = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3 1.1 0.5'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[m00_prev]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m00_expect]
type = FunctionValuePostprocessor
function = mass00_expect
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[m01_prev]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m01]
type = FunctionValuePostprocessor
function = expected_mass_change01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m01_expect]
type = FunctionValuePostprocessor
function = mass01_expect
execute_on = 'timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[s00]
type = FunctionValuePostprocessor
function = sat00
execute_on = 'initial timestep_end'
[]
[mass00_rate]
type = FunctionValuePostprocessor
function = expected_mass_change_rate
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = false
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.018
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s03
[console]
type = Console
execute_on = 'nonlinear linear'
interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
interval = 2
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/undrained_oedometer.i)
# An undrained oedometer test on a saturated poroelastic sample.
#
# The sample is a single unit element, with roller BCs on the sides
# and bottom. A constant displacement is applied to the top: disp_z = -0.01*t.
# There is no fluid flow.
#
# Under these conditions
# porepressure = -(Fluid bulk modulus)*log(1 - 0.01t)
# stress_xx = (bulk - 2*shear/3)*disp_z/L (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*disp_z/L (remember this is effective stress)
# where L is the height of the sample (L=1 in this test)
#
# Parameters:
# Bulk modulus = 2
# Shear modulus = 1.5
# fluid bulk modulus = 1
#
# Desired output:
# zdisp = -0.01*t
# p0 = 1*log(1-0.01t)
# stress_xx = stress_yy = -0.01*t
# stress_zz = -0.04*t
#
# Regarding the "log" - it just comes from conserving fluid mass
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_z
function = -0.01*t
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Postprocessors]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
use_displaced_mesh = true
[]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = undrained_oedometer
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/pls04.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
wet_thermal_conductivity = '10 2 31 2 40 1 31 1 10'
exponent = 0.5
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
use_enthalpy = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
use_internal_energy = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
use_internal_energy = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
use_enthalpy = true
flux_function = '0.5*x*y'
[]
[flux_3]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 2
variable = ppwater
fluid_phase = 0
use_relperm = true
use_enthalpy = true
use_mobility = true
[]
[flux_4]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 2
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-0.5*x*y'
use_enthalpy = true
use_thermal_conductivity = true
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = pls04
[]
(modules/porous_flow/test/tests/dirackernels/bh_except16.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
function_of = temperature
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/sinks/s02.i)
# apply a sink flux with use_mobility=true and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass00]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)'
vars = 'vol por dens0 pp bulk'
vals = '0.25 0.1 1.1 p00 1.3'
[]
[mass01]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)'
vars = 'vol por dens0 pp bulk'
vals = '0.25 0.1 1.1 p01 1.3'
[]
[expected_mass_change00]
type = ParsedFunction
value = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
vars = 'fcn perm dens0 pp bulk visc area dt'
vals = '6 0.2 1.1 p00 1.3 1.1 0.5 1E-3'
[]
[expected_mass_change01]
type = ParsedFunction
value = 'fcn*perm*dens0*exp(pp/bulk)/visc*area*dt'
vars = 'fcn perm dens0 pp bulk visc area dt'
vals = '6 0.2 1.1 p01 1.3 1.1 0.5 1E-3'
[]
[mass00_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm00_prev del_m00'
[]
[mass01_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm01_prev del_m01'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m00]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'initial timestep_end'
[]
[m00_prev]
type = FunctionValuePostprocessor
function = mass00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m00]
type = FunctionValuePostprocessor
function = expected_mass_change00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m00_expect]
type = FunctionValuePostprocessor
function = mass00_expect
execute_on = 'timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m01]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'initial timestep_end'
[]
[m01_prev]
type = FunctionValuePostprocessor
function = mass01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m01]
type = FunctionValuePostprocessor
function = expected_mass_change01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m01_expect]
type = FunctionValuePostprocessor
function = mass01_expect
execute_on = 'timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = pp
use_mobility = true
use_relperm = true
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.03
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s02
[console]
type = Console
execute_on = 'nonlinear linear'
interval = 30
[]
[csv]
type = CSV
execute_on = 'timestep_end'
interval = 3
[]
[]
(modules/porous_flow/test/tests/heat_advection/heat_advection_1d_KT.i)
# 1phase, heat advecting with a moving fluid
# Using the Kuzmin-Turek stabilization scheme
[Mesh]
type = GeneratedMesh
dim = 1
nx = 50
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[temp]
initial_condition = 200
[]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = '1-x'
[]
[]
[BCs]
[pp0]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[pp1]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[spit_heat]
type = DirichletBC
variable = temp
boundary = left
value = 300
[]
[suck_heat]
type = DirichletBC
variable = temp
boundary = right
value = 200
[]
[]
[Kernels]
[mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fluid_advection]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = fluid_advective_flux
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[heat_advection]
type = PorousFlowFluxLimitedTVDAdvection
variable = temp
advective_flux_calculator = heat_advective_flux
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1.3
[]
[fluid_advective_flux]
type = PorousFlowAdvectiveFluxCalculatorSaturated
flux_limiter_type = superbee
[]
[heat_advective_flux]
type = PorousFlowAdvectiveFluxCalculatorSaturatedHeat
flux_limiter_type = superbee
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 100
density0 = 1000
viscosity = 4.4
thermal_expansion = 0
cv = 2
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[massfrac]
type = PorousFlowMassFraction
[]
[PS]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.01
end_time = 0.6
[]
[VectorPostprocessors]
[T]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 51
sort_by = x
variable = temp
[]
[]
[Outputs]
file_base = heat_advection_1d_KT
[csv]
type = CSV
sync_times = '0.1 0.6'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/jacobian/desorped_mass01.i)
# 1phase
# vanGenuchten, constant-bulk density, HM porosity, 1component, unsaturated
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[conc]
family = MONOMIAL
order = CONSTANT
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pp]
type = RandomIC
variable = pp
min = -1
max = 1
[]
[conc]
type = RandomIC
variable = conc
min = 0
max = 1
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[conc]
type = PorousFlowDesorpedMassTimeDerivative
conc_var = conc
variable = conc
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp disp_x disp_y disp_z conc'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/basic_advection4.i)
# Basic advection with 1 porepressure and temperature as PorousFlow variables
# Constant permeability
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[T]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = 2E5
max = 4E5
[]
[T]
type = RandomIC
variable = T
min = 300
max = 900
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_T]
type = NullKernel
variable = T
[]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'P T'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-5
m = 0.6
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[methane]
type = MethaneFluidProperties
[]
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
temperature = T
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[fluid_qp]
type = PorousFlowSingleComponentFluid
fp = methane
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/dirackernels/bh_except10.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
compute_internal_energy = false
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
use_internal_energy = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/mass_vol_exp01.i)
# Tests the PorousFlowMassVolumetricExpansion kernel
# Fluid with constant bulk modulus, van-Genuchten capillary, constant porosity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[ICs]
[disp_x]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_x
[]
[disp_y]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_y
[]
[disp_z]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_z
[]
[p]
type = RandomIC
min = -1
max = 1
variable = porepressure
[]
[]
[BCs]
# necessary otherwise volumetric strain rate will be zero
[disp_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[disp_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'left right'
[]
[disp_z]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'left right'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
displacements = 'disp_x disp_y disp_z'
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
displacements = 'disp_x disp_y disp_z'
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
displacements = 'disp_x disp_y disp_z'
component = 2
[]
[poro]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
variable = porepressure
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[simple1]
type = TensorMechanicsPlasticSimpleTester
a = 0
b = 1
strength = 1E20
yield_function_tolerance = 1.0E-9
internal_constraint_tolerance = 1.0E-9
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-5
[]
[Outputs]
execute_on = 'timestep_end'
file_base = jacobian2
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except05.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
mass_fraction_component = 0
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_03.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 2 phases, 2 components, using flux_limiter_type = None
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 2
ymin = -1
ymax = 2
bias_y = 1.5
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux_ph0_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppwater
advective_flux_calculator = advective_flux_calculator_ph0_sp0
[]
[flux_ph0_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = ppgas
advective_flux_calculator = advective_flux_calculator_ph0_sp1
[]
[flux_ph1_sp0]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph0_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp0
[]
[flux_ph1_sp1]
type = PorousFlowFluxLimitedTVDAdvection
variable = massfrac_ph1_sp0
advective_flux_calculator = advective_flux_calculator_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_ph0_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 0
fluid_component = 0
[]
[advective_flux_calculator_ph0_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 0
fluid_component = 1
[]
[advective_flux_calculator_ph1_sp0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 1
fluid_component = 0
[]
[advective_flux_calculator_ph1_sp1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
phase = 1
fluid_component = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/jacobian/hgs01.i)
# apply a half-gaussian sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowHalfGaussianSink
boundary = 'left'
center = 0.1
sd = 1.1
max = 2.2
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowHalfGaussianSink
boundary = 'top left front'
center = 0.5
sd = 1.1
max = -2.2
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowHalfGaussianSink
boundary = 'right'
center = -0.1
sd = 1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-1.1*x*y'
[]
[flux_2]
type = PorousFlowHalfGaussianSink
boundary = 'bottom'
center = 3.2
sd = 1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls03
[]
(modules/porous_flow/test/tests/jacobian/denergy04.i)
# 2phase, 1 component, with solid displacements, time derivative of energy-density, THM porosity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pgas]
[]
[pwater]
[]
[temp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas temp pwater disp_x disp_y disp_z'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
cv = 1.3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
cv = 0.7
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
ensure_positive = false
porosity_zero = 0.7
thermal_expansion_coeff = 0.7
biot_coefficient = 0.9
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.1
density = 0.5
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/dirackernels/bh_except02.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
mass_fraction_component = 1
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/dirackernels/squarepulse1.i)
# Test PorousFlowSquarePulsePointSource DiracKernel
[Mesh]
type = GeneratedMesh
dim = 2
bias_x = 1.1
bias_y = 1.1
ymax = 1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pp
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[]
[Postprocessors]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
nl_abs_tol = 1e-14
dt = 200
end_time = 2000
[]
[Outputs]
perf_graph = true
file_base = squarepulse1
csv = true
execute_on = 'initial timestep_end'
[con]
output_linear = true
type = Console
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink1]
type = PorousFlowSquarePulsePointSource
start_time = 100
end_time = 300
point = '0.5 0.5 0'
mass_flux = -0.1
variable = pp
[]
[sink]
type = PorousFlowSquarePulsePointSource
start_time = 600
end_time = 1400
point = '0.5 0.5 0'
mass_flux = -0.1
variable = pp
[]
[source]
point = '0.5 0.5 0'
start_time = 1500
mass_flux = 0.2
end_time = 2000
variable = pp
type = PorousFlowSquarePulsePointSource
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux08.i)
# 1phase, 1component, constant viscosity, Kozeny-Carman permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 3
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pp]
type = RandomIC
variable = pp
min = -1
max = 1
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
poroperm_function = kozeny_carman_phi0
k_anisotropy = '1 0 0 0 2 0 0 0 3'
phi0 = 0.1
n = 1.0
m = 2.0
k0 = 2
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel_constM.i)
# Mandel's problem of consolodation of a drained medium
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
args = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
function = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 1
constant_fluid_bulk_modulus = 8
constant_biot_modulus = 4.7058823529
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel_constM
[csv]
interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi.i)
# Terzaghi's problem of consolodation of a drained medium
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
#
# FINAL NOTE: The above solution assumes constant Biot Modulus.
# In porous_flow this is not true. Therefore the solution is
# a little different than in the paper. This test was therefore
# validated against MOOSE's poromechanics, which can choose either
# a constant Biot Modulus (which has been shown to agree with
# the analytic solution), or a non-constant Biot Modulus (which
# gives the same results as porous_flow).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure_qp]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
ensure_positive = false
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 4
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_02.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 3 components, unsaturated, using flux_limiter_type = none
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 1
ymin = -1
ymax = 2
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[tracer0]
[]
[tracer1]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = -1
max = 0
[]
[tracer0]
variable = tracer0
type = RandomIC
min = 0
max = 1
[]
[tracer1]
variable = tracer1
type = RandomIC
min = 0
max = 1
[]
[]
[Kernels]
[fluxpp]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator_0
[]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer0
advective_flux_calculator = advective_flux_calculator_1
[]
[flux1]
type = PorousFlowFluxLimitedTVDAdvection
variable = tracer1
advective_flux_calculator = advective_flux_calculator_2
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp tracer0 tracer1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator_0]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 0
[]
[advective_flux_calculator_1]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 1
[]
[advective_flux_calculator_2]
type = PorousFlowAdvectiveFluxCalculatorUnsaturatedMultiComponent
flux_limiter_type = None
fluid_component = 2
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'tracer0 tracer1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/hysteresis/2phasePS_relperm.i)
# Simple example of a 2-phase situation with hysteretic relative permeability. Gas is added to and removed from the system in order to observe the hysteresis
# All liquid water exists in component 0
# All gas exists in component 1
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[]
[DiracKernels]
[pump]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = flux
point = '0.5 0 0'
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[sat0]
family = MONOMIAL
order = CONSTANT
[]
[pp1]
family = MONOMIAL
order = CONSTANT
[]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[relperm_liquid]
family = MONOMIAL
order = CONSTANT
[]
[relperm_gas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat0]
type = PorousFlowPropertyAux
variable = sat0
phase = 0
property = saturation
[]
[relperm_liquid]
type = PorousFlowPropertyAux
variable = relperm_liquid
property = relperm
phase = 0
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
[]
[pp1]
type = PorousFlowPropertyAux
variable = pp1
phase = 1
property = pressure
[]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[]
[Modules]
[FluidProperties]
[simple_fluid] # same properties used for both phases
type = SimpleFluidProperties
bulk_modulus = 10 # so pumping does not result in excessive porepressure
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Postprocessors]
[flux]
type = FunctionValuePostprocessor
function = 'if(t <= 9, 10, -10)'
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[sat0]
type = PointValue
point = '0 0 0'
variable = sat0
[]
[sat1]
type = PointValue
point = '0 0 0'
variable = sat1
[]
[kr_liq]
type = PointValue
point = '0 0 0'
variable = relperm_liquid
[]
[kr_gas]
type = PointValue
point = '0 0 0'
variable = relperm_gas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = ' lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.5
end_time = 18
nl_abs_tol = 1E-10
[]
[Outputs]
csv = true
[]
(modules/porous_flow/test/tests/gravity/grav01c.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant fluid-bulk, constant viscosity, constant permeability, Corey relative perm
# unsaturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = -1
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 2 -1 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = -1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01c
exodus = true
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/mandel.i)
# Mandel's problem of consolodation of a drained medium
#
# A sample is in plane strain.
# -a <= x <= a
# -b <= y <= b
# It is squashed with constant force by impermeable, frictionless plattens on its top and bottom surfaces (at y=+/-b)
# Fluid is allowed to leak out from its sides (at x=+/-a)
# The porepressure within the sample is monitored.
#
# As is common in the literature, this is simulated by
# considering the quarter-sample, 0<=x<=a and 0<=y<=b, with
# impermeable, roller BCs at x=0 and y=0 and y=b.
# Porepressure is fixed at zero on x=a.
# Porepressure and displacement are initialised to zero.
# Then the top (y=b) is moved downwards with prescribed velocity,
# so that the total force that is inducing this downwards velocity
# is fixed. The velocity is worked out by solving Mandel's problem
# analytically, and the total force is monitored in the simulation
# to check that it indeed remains constant.
#
# Here are the problem's parameters, and their values:
# Soil width. a = 1
# Soil height. b = 0.1
# Soil's Lame lambda. la = 0.5
# Soil's Lame mu, which is also the Soil's shear modulus. mu = G = 0.75
# Soil bulk modulus. K = la + 2*mu/3 = 1
# Drained Poisson ratio. nu = (3K - 2G)/(6K + 2G) = 0.2
# Soil bulk compliance. 1/K = 1
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Biot modulus. M = 1/(phi0/Kf + (alpha - phi0)(1 - alpha)/K) = 4.705882
# Undrained bulk modulus. Ku = K + alpha^2*M = 2.694118
# Undrained Poisson ratio. nuu = (3Ku - 2G)/(6Ku + 2G) = 0.372627
# Skempton coefficient. B = alpha*M/Ku = 1.048035
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Consolidation coefficient. c = 2*k*B^2*G*(1-nu)*(1+nuu)^2/9/(1-nuu)/(nuu-nu) = 3.821656
# Normal stress on top. F = 1
#
# The solution for porepressure and displacements is given in
# AHD Cheng and E Detournay "A direct boundary element method for plane strain poroelasticity" International Journal of Numerical and Analytical Methods in Geomechanics 12 (1988) 551-572.
# The solution involves complicated infinite series, so I shall not write it here
#
# FINAL NOTE: The above solution assumes constant Biot Modulus.
# In porous_flow this is not true. Therefore the solution is
# a little different than in the paper. This test was therefore
# validated against MOOSE's poromechanics, which can choose either
# a constant Biot Modulus (which has been shown to agree with
# the analytic solution), or a non-constant Biot Modulus (which
# gives the same results as porous_flow).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 10
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 0.1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[roller_xmin]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left'
[]
[roller_ymin]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom'
[]
[plane_strain]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back front'
[]
[xmax_drained]
type = DirichletBC
variable = porepressure
value = 0
boundary = right
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_y
function = top_velocity
boundary = top
[]
[]
[Functions]
[top_velocity]
type = PiecewiseLinear
x = '0 0.002 0.006 0.014 0.03 0.046 0.062 0.078 0.094 0.11 0.126 0.142 0.158 0.174 0.19 0.206 0.222 0.238 0.254 0.27 0.286 0.302 0.318 0.334 0.35 0.366 0.382 0.398 0.414 0.43 0.446 0.462 0.478 0.494 0.51 0.526 0.542 0.558 0.574 0.59 0.606 0.622 0.638 0.654 0.67 0.686 0.702'
y = '-0.041824842 -0.042730269 -0.043412712 -0.04428867 -0.045509181 -0.04645965 -0.047268246 -0.047974749 -0.048597109 -0.0491467 -0.049632388 -0.050061697 -0.050441198 -0.050776675 -0.051073238 -0.0513354 -0.051567152 -0.051772022 -0.051953128 -0.052113227 -0.052254754 -0.052379865 -0.052490464 -0.052588233 -0.052674662 -0.052751065 -0.052818606 -0.052878312 -0.052931093 -0.052977751 -0.053018997 -0.053055459 -0.053087691 -0.053116185 -0.053141373 -0.05316364 -0.053183324 -0.053200724 -0.053216106 -0.053229704 -0.053241725 -0.053252351 -0.053261745 -0.053270049 -0.053277389 -0.053283879 -0.053289615'
[]
[]
[AuxVariables]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[tot_force]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[tot_force]
type = ParsedAux
args = 'stress_yy porepressure'
execute_on = timestep_end
variable = tot_force
function = '-stress_yy+0.6*porepressure'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
ensure_positive = false
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0.0 0 0'
variable = porepressure
[]
[p1]
type = PointValue
outputs = csv
point = '0.1 0 0'
variable = porepressure
[]
[p2]
type = PointValue
outputs = csv
point = '0.2 0 0'
variable = porepressure
[]
[p3]
type = PointValue
outputs = csv
point = '0.3 0 0'
variable = porepressure
[]
[p4]
type = PointValue
outputs = csv
point = '0.4 0 0'
variable = porepressure
[]
[p5]
type = PointValue
outputs = csv
point = '0.5 0 0'
variable = porepressure
[]
[p6]
type = PointValue
outputs = csv
point = '0.6 0 0'
variable = porepressure
[]
[p7]
type = PointValue
outputs = csv
point = '0.7 0 0'
variable = porepressure
[]
[p8]
type = PointValue
outputs = csv
point = '0.8 0 0'
variable = porepressure
[]
[p9]
type = PointValue
outputs = csv
point = '0.9 0 0'
variable = porepressure
[]
[p99]
type = PointValue
outputs = csv
point = '1 0 0'
variable = porepressure
[]
[xdisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_x
[]
[ydisp]
type = PointValue
outputs = csv
point = '1 0.1 0'
variable = disp_y
[]
[total_downwards_force]
type = ElementAverageValue
outputs = csv
variable = tot_force
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.15*t<0.01,0.15*t,0.01)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 0.7
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = mandel
[csv]
interval = 3
type = CSV
[]
[]
(modules/porous_flow/test/tests/sinks/s09_fully_saturated.i)
# Apply a piecewise-linear sink flux to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has a very strong piecewise-linear flux that keeps the
# porepressure~0 at that side. Fluid mass is extracted by this flux in proportion
# to the fluid component mass fraction.
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
# This test uses the FullySaturated version of the flow Kernel. This does not
# suffer from as much numerical diffusion as the standard PorousFlow Kernel since
# it does not employ any upwinding.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[flux0]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 0
gravity = '0 0 0'
variable = frac
[]
[flux1]
type = PorousFlowFullySaturatedDarcyFlow
fluid_component = 1
gravity = '0 0 0'
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # almost irrelevant, except that the ability of the right BC to keep P fixed at zero is related to density_P0
thermal_expansion = 0
viscosity = 11
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2 # irrelevant in this fully-saturated situation
phase = 0
[]
[]
[BCs]
[lhs_fixed_a]
type = DirichletBC
boundary = 'left'
variable = frac
value = 1
[]
[lhs_fixed_b]
type = DirichletBC
boundary = 'left'
variable = pp
value = 1
[]
[flux0]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = frac # the zeroth comonent
mass_fraction_component = 0
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[flux1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = pp # comonent 1
mass_fraction_component = 1
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-11
nl_abs_tol = 1E-11
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
file_base = s09_fully_saturated
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
interval = 10
[]
(modules/porous_flow/test/tests/energy_conservation/except02.i)
# checking that the heat-energy postprocessor throws the correct error if the kernel_variable_number is illegal
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[temp]
[]
[]
[ICs]
[tinit]
type = FunctionIC
function = '100*x'
variable = temp
[]
[pinit]
type = FunctionIC
function = x
variable = pp
[]
[]
[Kernels]
[dummyt]
type = TimeDerivative
variable = temp
[]
[dummyp]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
viscosity = 0.001
thermal_expansion = 0
cv = 1.3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Postprocessors]
[total_heat]
type = PorousFlowHeatEnergy
kernel_variable_number = 2
[]
[rock_heat]
type = PorousFlowHeatEnergy
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1 1 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = except01
csv = true
[]
(modules/porous_flow/test/tests/sinks/s06.i)
# apply a half-cubic sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = x*(y+1)
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Functions]
[mass10]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
vars = 'vol por dens0 pp bulk al m'
vals = '0.25 0.1 1.1 p10 1.3 1.1 0.5'
[]
[rate10]
type = ParsedFunction
value = 'fcn*if(pp>center,m,if(pp<themin,0,m/c/c/c*(2*(pp-center)+c)*((pp-center)-c)*((pp-center)-c)))'
vars = 'm fcn pp center sd themin c'
vals = '2 3 p10 0.9 0.5 0.1 -0.8'
[]
[mass10_expect]
type = ParsedFunction
value = 'mass_prev-rate*area*dt'
vars = 'mass_prev rate area dt'
vals = 'm10_prev m10_rate 0.5 2E-3'
[]
[mass11]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)*if(pp>=0,1,pow(1+pow(-al*pp,1.0/(1-m)),-m))'
vars = 'vol por dens0 pp bulk al m'
vals = '0.25 0.1 1.1 p11 1.3 1.1 0.5'
[]
[rate11]
type = ParsedFunction
value = 'fcn*if(pp>center,m,if(pp<themin,0,m/c/c/c*(2*(pp-center)+c)*((pp-center)-c)*((pp-center)-c)))'
vars = 'm fcn pp center sd themin c'
vals = '2 3 p11 0.9 0.5 0.1 -0.8'
[]
[mass11_expect]
type = ParsedFunction
value = 'mass_prev-rate*area*dt'
vars = 'mass_prev rate area dt'
vals = 'm11_prev m11_rate 0.5 2E-3'
[]
[]
[Postprocessors]
[flux00]
type = PointValue
variable = flux_out
point = '0 0 0'
[]
[flux01]
type = PointValue
variable = flux_out
point = '0 1 0'
[]
[flux10]
type = PointValue
variable = flux_out
point = '1 0 0'
[]
[flux11]
type = PointValue
variable = flux_out
point = '1 1 0'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'initial timestep_end'
[]
[m10_prev]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m10_rate]
type = FunctionValuePostprocessor
function = rate10
execute_on = 'timestep_end'
[]
[m10_expect]
type = FunctionValuePostprocessor
function = mass10_expect
execute_on = 'timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'initial timestep_end'
[]
[m11_prev]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m11_rate]
type = FunctionValuePostprocessor
function = rate11
execute_on = 'timestep_end'
[]
[m11_expect]
type = FunctionValuePostprocessor
function = mass11_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowHalfCubicSink
boundary = 'left right'
max = 2
cutoff = -0.8
center = 0.9
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 3
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2E-3
end_time = 6E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s06
[console]
type = Console
execute_on = 'nonlinear linear'
interval = 5
[]
[csv]
type = CSV
execute_on = 'timestep_end'
interval = 3
[]
[]
(modules/porous_flow/test/tests/sinks/s09.i)
# Apply a piecewise-linear sink flux to the right-hand side and watch fluid flow to it
#
# This test has a single phase with two components. The test initialises with
# the porous material fully filled with component=1. The left-hand side is fixed
# at porepressure=1 and mass-fraction of the zeroth component being unity.
# The right-hand side has a very strong piecewise-linear flux that keeps the
# porepressure~0 at that side. Fluid mass is extracted by this flux in proportion
# to the fluid component mass fraction.
#
# Therefore, the zeroth fluid component will flow from left to right (down the
# pressure gradient).
#
# The important DE is
# porosity * dc/dt = (perm / visc) * grad(P) * grad(c)
# which is true for c = mass-fraction, and very large bulk modulus of the fluid.
# For grad(P) constant in time and space (as in this example) this is just the
# advection equation for c, with velocity = perm / visc / porosity. The parameters
# are chosen to velocity = 1 m/s.
# In the numerical world, and especially with full upwinding, the advection equation
# suffers from diffusion. In this example, the diffusion is obvious when plotting
# the mass-fraction along the line, but the average velocity of the front is still
# correct at 1 m/s.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac'
number_fluid_phases = 1
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[frac]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = 1-x
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = frac
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
gravity = '0 0 0'
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e10 # need large in order for constant-velocity advection
density0 = 1 # almost irrelevant, except that the ability of the right BC to keep P fixed at zero is related to density_P0
thermal_expansion = 0
viscosity = 11
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = frac
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2 # irrelevant in this fully-saturated situation
phase = 0
[]
[]
[BCs]
[lhs_fixed_a]
type = DirichletBC
boundary = 'left'
variable = frac
value = 1
[]
[lhs_fixed_b]
type = DirichletBC
boundary = 'left'
variable = pp
value = 1
[]
[flux0]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = frac # the zeroth comonent
mass_fraction_component = 0
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[flux1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '-100 100'
multipliers = '-1 1'
variable = pp # comonent 1
mass_fraction_component = 1
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1E4
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-2
end_time = 1
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[VectorPostprocessors]
[mf]
type = LineValueSampler
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 100
sort_by = x
variable = frac
[]
[]
[Outputs]
file_base = s09
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
sync_times = '0.1 0.5 1'
sync_only = true
[]
interval = 10
[]
(modules/porous_flow/test/tests/mass_conservation/mass08.i)
# Checking that the mass postprocessor throws the correct error when a given phase index
# is too large
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = 2
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/line_sink02.i)
# PorousFlowPolyLineSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow
p_or_t_vals = '-0.9 1.5'
fluxes = '-1.1 2.2'
[]
[dirac1]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = ppgas
line_length = 1
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -2.2'
[]
[dirac2]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac3]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac4]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac5]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = temp
line_length = 0.9
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac6]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
function_of = temperature
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '0 -0.2'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink02
[]
(modules/porous_flow/test/tests/jacobian/mass05_nodens.i)
# 2phase (PP)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 3components (that exist in both phases)
# unsaturated
# multiply_by_density = false
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[mass_sp0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
multiply_by_density = false
[]
[mass_sp1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
multiply_by_density = false
[]
[mass_sp2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = massfrac_ph0_sp0
multiply_by_density = false
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/energy_conservation/heat03.i)
# The sample is a single unit element, with roller BCs on the sides
# and bottom. A constant displacement is applied to the top: disp_z = -0.01*t.
# There is no fluid flow or heat flow.
# Heat energy conservation is checked.
#
# Under these conditions (here L is the height of the sample: L=1 in this case):
# porepressure = porepressure(t=0) - (Fluid bulk modulus)*log(1 - 0.01*t)
# stress_xx = (bulk - 2*shear/3)*disp_z/L (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*disp_z/L (remember this is effective stress)
# Also, the total heat energy must be conserved: this is
# fluid_mass * fluid_heat_cap * temperature + (1 - porosity) * rock_density * rock_heat_cap * temperature * volume
# Since fluid_mass is conserved, and volume = (1 - 0.01*t), this can be solved for temperature:
# temperature = initial_heat_energy / (fluid_mass * fluid_heat_cap + (1 - porosity) * rock_density * rock_heat_cap * (1 - 0.01*t))
#
# Parameters:
# Bulk modulus = 2
# Shear modulus = 1.5
# fluid bulk modulus = 0.5
# initial porepressure = 0.1
# initial temperature = 10
#
# Desired output:
# zdisp = -0.01*t
# p0 = 0.1 - 0.5*log(1-0.01*t)
# stress_xx = stress_yy = -0.01*t
# stress_zz = -0.04*t
# t0 = 11.5 / (0.159 + 0.99 * (1 - 0.01*t))
#
# Regarding the "log" - it comes from preserving fluid mass
#
# Note that the PorousFlowMassVolumetricExpansion and PorousFlowHeatVolumetricExpansion Kernels are used
# Note too that the Postprocessors have use_displaced_mesh = true
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
initial_condition = 0.1
[]
[temp]
initial_condition = 10
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[top_velocity]
type = FunctionDirichletBC
variable = disp_z
function = -0.01*t
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = pp
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[temp]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[poro_vol_exp_temp]
type = PorousFlowHeatVolumetricExpansion
variable = temp
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 1
viscosity = 1
thermal_expansion = 0
cv = 1.3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.5 0 0 0 0.5 0 0 0 0.5'
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = pp
[]
[t0]
type = PointValue
outputs = 'console csv'
execute_on = 'initial timestep_end'
point = '0 0 0'
variable = temp
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 0.5'
use_displaced_mesh = false
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = csv
point = '0 0 0'
variable = stress_zz
[]
[fluid_mass]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
use_displaced_mesh = true
outputs = 'console csv'
[]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
execute_on = 'initial timestep_end'
use_displaced_mesh = true
outputs = 'console csv'
[]
[rock_heat]
type = PorousFlowHeatEnergy
execute_on = 'initial timestep_end'
use_displaced_mesh = true
outputs = 'console csv'
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
execute_on = 'initial timestep_end'
use_displaced_mesh = true
outputs = 'console csv'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-8 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 2
end_time = 10
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = heat03
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/gravity/grav02b.i)
# Checking that gravity head is established in the steady-state situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = -1.0
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[BCs]
[ppwater]
type = DirichletBC
boundary = right
variable = ppwater
value = -1
[]
[ppgas]
type = DirichletBC
boundary = right
variable = ppgas
value = 0
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 2 pp_water_top 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 1 pp_gas_top 0.1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = grav02b
[csv]
type = CSV
[]
exodus = false
[]
(modules/porous_flow/test/tests/poro_elasticity/vol_expansion_poroperm.i)
# Apply an increasing porepressure, with zero mechanical forces,
# and observe the corresponding volumetric expansion and porosity increase.
# Check that permeability is calculated correctly from porosity.
#
# P = t
# With the Biot coefficient being 1, the effective stresses should be
# stress_xx = stress_yy = stress_zz = t
# With bulk modulus = 1 then should have
# vol_strain = strain_xx + strain_yy + strain_zz = t.
#
# With the biot coefficient being 1, the porosity (phi) # at time t is:
# phi = 1 - (1 - phi0) / exp(vol_strain)
# where phi0 is the porosity at t = 0 and P = 0.
#
# The permeability (k) is
# k = k_anisotropic * f * d^2 * phi^n / (1-phi)^m
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[p]
[]
[]
[BCs]
[p]
type = FunctionDirichletBC
boundary = 'bottom top'
variable = p
function = t
[]
[xmin]
type = DirichletBC
boundary = left
variable = disp_x
value = 0
[]
[ymin]
type = DirichletBC
boundary = bottom
variable = disp_y
value = 0
[]
[zmin]
type = DirichletBC
boundary = back
variable = disp_z
value = 0
[]
[]
[Kernels]
[p_does_not_really_diffuse]
type = Diffusion
variable = p
[]
[TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 1
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 1
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 1
variable = disp_z
component = 2
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[poro]
type = PointValue
variable = poro
point = '0 0 0'
[]
[perm_x]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 1
shear_modulus = 1
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = p
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
solid_bulk = 1
biot_coefficient = 1
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_fd2
f = 0.1
d = 5
m = 2
n = 7
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_atol -ksp_rtol'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 10 1E-15 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
dt = 0.1
end_time = 1
[]
[Outputs]
file_base = vol_expansion_poroperm
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/actions/addmaterials2.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# the at_nodes parameter isn't provided. In this case, only a single material
# is given, and the action must correctly identify if materials should be added
# at the nodes, qps, or even both
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/heterogeneous_materials/vol_expansion_poroperm.i)
# Apply an increasing porepressure, with zero mechanical forces,
# and observe the corresponding volumetric expansion and porosity increase.
# Check that permeability is calculated correctly from porosity.
#
# P = t
# With the Biot coefficient being 1, the effective stresses should be
# stress_xx = stress_yy = stress_zz = t
# With bulk modulus = 1 then should have
# vol_strain = strain_xx + strain_yy + strain_zz = t.
#
# With the biot coefficient being 1, the porosity (phi) # at time t is:
# phi = 1 - (1 - phi0) / exp(vol_strain)
# where phi0 is the porosity at t = 0 and P = 0.
#
# The permeability (k) is
# k = k_anisotropic * f * d^2 * phi^n / (1-phi)^m
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[p]
[]
[]
[BCs]
[p]
type = FunctionDirichletBC
boundary = 'bottom top'
variable = p
function = t
[]
[xmin]
type = DirichletBC
boundary = left
variable = disp_x
value = 0
[]
[ymin]
type = DirichletBC
boundary = bottom
variable = disp_y
value = 0
[]
[zmin]
type = DirichletBC
boundary = back
variable = disp_z
value = 0
[]
[]
[Kernels]
[p_does_not_really_diffuse]
type = Diffusion
variable = p
[]
[TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 1
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 1
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 1
variable = disp_z
component = 2
[]
[]
[AuxVariables]
[poro0]
order = CONSTANT
family = MONOMIAL
[]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[ICs]
[poro0]
type = RandomIC
seed = 0
variable = poro0
max = 0.15
min = 0.05
[]
[]
[AuxKernels]
[poromat]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
bulk_modulus = 1
shear_modulus = 1
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = p
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = poro0
solid_bulk = 1
biot_coefficient = 1
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_fd2
f = 0.1
d = 5
m = 2
n = 7
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_atol -ksp_rtol'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 10 1E-15 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
dt = 0.1
end_time = 1
[]
[Outputs]
exodus = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/newton_cooling/nc01.i)
# Newton cooling from a bar. 1-phase transient
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1000
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 20
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-15 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E8
dt = 1E6
[]
[Outputs]
file_base = nc01
[along_line]
type = CSV
execute_vector_postprocessors_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/brineco2_liquid.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single liquid phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e6
max = 8e6
variable = pgas
[]
[z_liquid]
type = RandomIC
min = 0.01
max = 0.03
variable = zi
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e4
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/jacobian/basic_advection6.i)
# Basic advection with 2 porepressure as PorousFlow variables
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P0]
[]
[P1]
[]
[]
[ICs]
[P0]
type = RandomIC
variable = P0
min = -1
max = 0
[]
[P1]
type = RandomIC
variable = P1
min = 0
max = 1
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P0]
type = NullKernel
variable = P0
[]
[dummy_P1]
type = NullKernel
variable = P1
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'P0 P1'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 4
density0 = 3
thermal_expansion = 0
viscosity = 130.0
[]
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow2PhasePP
phase0_porepressure = P0
phase1_porepressure = P1
capillary_pressure = pc
[]
[simple_fluid0_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[effective_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
fluid = true
biot_coefficient = 0.5
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
poroperm_function = kozeny_carman_phi0
k0 = 5
m = 2
n = 2
phi0 = 0.1
[]
[relperm0_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm1_qp]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.0
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/denergy05.i)
# 2phase, 1 component, with solid displacements, time derivative of energy-density, THM porosity wth _ensure_positive = true, and compressive strains
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pgas]
[]
[pwater]
[]
[temp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.0
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.0
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.0
[]
[pgas]
type = RandomIC
variable = pgas
max = 0.01
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -0.01
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas temp pwater disp_x disp_y disp_z'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
cv = 1.3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
cv = 0.7
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
porosity_zero = 0.7
thermal_expansion_coeff = 0.7
biot_coefficient = 0.9
solid_bulk = 10
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.1
density = 0.5
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rd03.i)
[Mesh]
file = gold/rd02.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '2E4 1E6'
x = '0 1E6'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[]
[]
[Variables]
[pressure]
initial_from_file_timestep = LATEST
initial_from_file_var = pressure
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = DirichletBC
boundary = left
value = 0.0
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 8.2944E6
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rd03
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[along_line]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except06.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/examples/tutorial/11.i)
# Two-phase borehole injection problem
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomain_ids = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block_id = '0 1'
new_block_name = 'caps aquifer'
input = 'injection_area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater pgas T disp_x disp_y'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
gravity = '0 0 0'
biot_coefficient = 1.0
PorousFlowDictator = dictator
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[T]
initial_condition = 330
scaling = 1E-5
[]
[disp_x]
scaling = 1E-5
[]
[disp_y]
scaling = 1E-5
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[vol_strain_rate_water]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[vol_strain_rate_co2]
type = PorousFlowMassVolumetricExpansion
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
use_displaced_mesh = false
variable = T
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = T
[]
[conduction]
type = PorousFlowHeatConduction
use_displaced_mesh = false
variable = T
[]
[vol_strain_rate_heat]
type = PorousFlowHeatVolumetricExpansion
use_displaced_mesh = false
variable = T
[]
[grad_stress_x]
type = StressDivergenceTensors
temperature = T
variable = disp_x
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
component = 0
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
variable = disp_x
use_displaced_mesh = false
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
temperature = T
variable = disp_y
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
component = 1
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
variable = disp_y
use_displaced_mesh = false
component = 1
[]
[]
[AuxVariables]
[disp_z]
[]
[effective_fluid_pressure]
family = MONOMIAL
order = CONSTANT
[]
[mass_frac_phase0_species0]
initial_condition = 1 # all water in phase=0
[]
[mass_frac_phase1_species0]
initial_condition = 0 # no water in phase=1
[]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_tt]
family = MONOMIAL
order = CONSTANT
[]
[stress_zz]
family = MONOMIAL
order = CONSTANT
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[effective_fluid_pressure]
type = ParsedAux
args = 'pwater pgas swater sgas'
function = 'pwater * swater + pgas * sgas'
variable = effective_fluid_pressure
[]
[swater]
type = PorousFlowPropertyAux
variable = swater
property = saturation
phase = 0
execute_on = timestep_end
[]
[sgas]
type = PorousFlowPropertyAux
variable = sgas
property = saturation
phase = 1
execute_on = timestep_end
[]
[stress_rr]
type = RankTwoScalarAux
variable = stress_rr
rank_two_tensor = stress
scalar_type = RadialStress
point1 = '0 0 0'
point2 = '0 0 1'
execute_on = timestep_end
[]
[stress_tt]
type = RankTwoScalarAux
variable = stress_tt
rank_two_tensor = stress
scalar_type = HoopStress
point1 = '0 0 0'
point2 = '0 0 1'
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
variable = stress_zz
rank_two_tensor = stress
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
execute_on = timestep_end
[]
[]
[BCs]
[roller_tmax]
type = DirichletBC
variable = disp_x
value = 0
boundary = dmax
[]
[roller_tmin]
type = DirichletBC
variable = disp_y
value = 0
boundary = dmin
[]
[pinned_top_bottom_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'top bottom'
[]
[pinned_top_bottom_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'top bottom'
[]
[cavity_pressure_x]
type = Pressure
boundary = injection_area
variable = disp_x
component = 0
postprocessor = constrained_effective_fluid_pressure_at_wellbore
use_displaced_mesh = false
[]
[cavity_pressure_y]
type = Pressure
boundary = injection_area
variable = disp_y
component = 1
postprocessor = constrained_effective_fluid_pressure_at_wellbore
use_displaced_mesh = false
[]
[cold_co2]
type = DirichletBC
boundary = injection_area
variable = T
value = 290 # injection temperature
use_displaced_mesh = false
[]
[constant_co2_injection]
type = PorousFlowSink
boundary = injection_area
variable = pgas
fluid_phase = 1
flux_function = -1E-4
use_displaced_mesh = false
[]
[outer_water_removal]
type = PorousFlowPiecewiseLinearSink
boundary = rmax
variable = pwater
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[outer_co2_removal]
type = PorousFlowPiecewiseLinearSink
boundary = rmax
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20.1E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[]
[Modules]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = co2_tabulated_11.csv
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = T
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'mass_frac_phase0_species0 mass_frac_phase1_species0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.1
sum_s_res = 0.2
phase = 0
[]
[relperm_co2]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[porosity_mat]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
porosity_zero = 0.1
reference_temperature = 330
reference_porepressure = 20E6
thermal_expansion_coeff = 15E-6 # volumetric
solid_bulk = 8E9 # unimportant since biot = 1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityKozenyCarman
block = aquifer
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-12
[]
[permeability_caps]
type = PorousFlowPermeabilityKozenyCarman
block = caps
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-15
k_anisotropy = '1 0 0 0 1 0 0 0 0.1'
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2 0 0 0 2 0 0 0 2'
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2300
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5E9
poissons_ratio = 0.0
[]
[strain]
type = ComputeSmallStrain
eigenstrain_names = 'thermal_contribution initial_stress'
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = T
thermal_expansion_coeff = 5E-6 # this is the linear thermal expansion coefficient
eigenstrain_name = thermal_contribution
stress_free_temperature = 330
[]
[initial_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '20E6 0 0 0 20E6 0 0 0 20E6'
eigenstrain_name = initial_stress
[]
[stress]
type = ComputeLinearElasticStress
[]
[effective_fluid_pressure_mat]
type = PorousFlowEffectiveFluidPressure
[]
[volumetric_strain]
type = PorousFlowVolumetricStrain
[]
[]
[Postprocessors]
[effective_fluid_pressure_at_wellbore]
type = PointValue
variable = effective_fluid_pressure
point = '1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[constrained_effective_fluid_pressure_at_wellbore]
type = FunctionValuePostprocessor
function = constrain_effective_fluid_pressure
execute_on = timestep_begin
[]
[]
[Functions]
[constrain_effective_fluid_pressure]
type = ParsedFunction
vars = effective_fluid_pressure_at_wellbore
vals = effective_fluid_pressure_at_wellbore
value = 'max(effective_fluid_pressure_at_wellbore, 20E6)'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E3
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E3
growth_factor = 1.2
optimal_iterations = 10
[]
nl_abs_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/dirackernels/bh_except11.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_relative_permeability = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/brineco2_liquid_2.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that give a single liquid phase, including salt as a nonlinear variable
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[zi]
[]
[xnacl]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 5e6
max = 8e6
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.03
variable = zi
[]
[xnacl]
type = RandomIC
min = 0.01
max = 0.15
variable = xnacl
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
variable = xnacl
fluid_component = 2
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[adv2]
type = PorousFlowAdvectiveFlux
variable = xnacl
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi xnacl'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/porous_flow/test/tests/dirackernels/pls02.i)
# fully-saturated situation with a poly-line sink with use_mobility=true
# The poly-line consists of 2 points, and has a length
# of 0.5. Each point is weighted with a weight of 0.1
# The PorousFlowPolyLineSink has
# p_or_t_vals = 0 1E7
# fluxes = 0 1
# so that for 0<=porepressure<=1E7
# base flux = porepressure * 1E-6 * mobility (measured in kg.m^-1.s^-1),
# and when multiplied by the poly-line length, and
# the weighting of each point, the mass flux is
# flux = porepressure * 0.5*E-8 * mobility (kg.s^-1).
#
# The fluid and matrix properties are:
# porosity = 0.1
# element volume = 8 m^3
# density = dens0 * exp(P / bulk), with bulk = 2E7
# initial porepressure P0 = 1E7
# viscosity = 0.2
# So, fluid mass = 0.8 * density (kg)
#
# The equation to solve is
# d(Mass)/dt = - porepressure * 0.5*E-8 * density / viscosity
#
# PorousFlow discretises time to conserve mass, so to march
# forward in time, we must solve
# Mass(dt) = Mass(0) - P * 0.5E-8 * density / viscosity * dt
# or
# 0.8 * dens0 * exp(P/bulk) = 0.8 * dens0 * exp(P0/bulk) - P * 0.5E-8 * density / viscosity * dt
# For the numbers written above this gives
# P(t=1) = 6.36947 MPa
# which is given precisely by MOOSE
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 0.2
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[pls]
# This defines a sink that has strength
# f = L(P) * relperm * L_seg
# where
# L(P) is a piecewise-linear function of porepressure
# that is zero at pp=0 and 1 at pp=1E7
# relperm is the relative permeability of the fluid
# L_seg is the line-segment length associated with
# the Dirac points defined in the file pls02.bh
type = PorousFlowPolyLineSink
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = pls_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
point_file = pls02.bh
# Now define the piecewise-linear function, L
# First, we want L to be a function of porepressure (and not
# temperature or something else). The following means that
# p_or_t_vals should be intepreted by MOOSE as the zeroth-phase
# porepressure
function_of = pressure
fluid_phase = 0
# Second, define the piecewise-linear function, L
# The following means
# flux=0 when pp=0 (and also pp<0)
# flux=1 when pp=1E7 (and also pp>1E7)
# flux=linearly intepolated between pp=0 and pp=1E7
# When flux>0 this means a sink, while flux<0 means a source
p_or_t_vals = '0 1E7'
fluxes = '0 1'
# Finally, in this case we want to always multiply
# L by the fluid mobility (of the zeroth phase) and
# use that in the sink strength instead of the bare L
# computed above
use_mobility = true
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
file_base = pls02
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/fflux03.i)
# 2phase (PP), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/adaptivity/hex_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
execute_on = 'final'
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/dirackernels/bh_except01.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 1
point_file = bh02.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/hysteresis/relperm_jac_1.i)
# Test of derivatives computed in PorousFlowHystereticRelativePermeability classes along first-order curve
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '-1 0 0'
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid_0]
type = SimpleFluidProperties
bulk_modulus = 10
viscosity = 1
[]
[simple_fluid_1]
type = SimpleFluidProperties
bulk_modulus = 1
viscosity = 3
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid_1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1'
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
initial_order = 1
previous_turning_points = 0.3
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 0.8
gas_low_extension_type = linear_like
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/gravity/grav02c.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-3 1E-2 1E-1'
x = '1E-3 1E-2 1E-1'
[]
[]
[Variables]
[ppwater]
initial_condition = -0.1
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 2 pp_water_top 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = FunctionDT
function = dts
[]
end_time = 1.0
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = grav02c
[csv]
type = CSV
[]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/fflux02.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = -0.7+x+y
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/line_sink03.i)
# PorousFlowPeacemanBorehole with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
# NOTE: this test has suffered from repeated failures since its inception. The problem always appears to be caused by having too many Dirac points in an element: see #10471. As of Nov2020, the dirac7 DiracKernel uses only one Dirac point, not ten_points.bh. One day it would be good to be able to use point_file = ten_points.bh
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow0]
type = PorousFlowSumQuantity
[]
[dummy_outflow1]
type = PorousFlowSumQuantity
[]
[dummy_outflow2]
type = PorousFlowSumQuantity
[]
[dummy_outflow3]
type = PorousFlowSumQuantity
[]
[dummy_outflow4]
type = PorousFlowSumQuantity
[]
[dummy_outflow5]
type = PorousFlowSumQuantity
[]
[dummy_outflow6]
type = PorousFlowSumQuantity
[]
[dummy_outflow7]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.02 0.03 0.02 0.0 0.01 0.03 0.01 0.3'
[]
[]
[DiracKernels]
#active = 'dirac6 dirac2' # incorrect jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5' # correct jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac7' # correct jacobian in dbg, but not in opt, for ny=2
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian in dbg, but correct for opt, for ny=1
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5' # correct jacobian, for ny=1
#active = 'dirac0 dirac1 dirac2 dirac3 dirac4 dirac5 dirac6' # incorrect jacobian in dbg, but correct for opt, for ny=1. row24, col 21 and 22 are wrong. row24=node3, 21=ppwater, 22=ppgas, 24=massfrac_ph0_sp1 (all at node3)
[dirac0]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow0
character = 1
bottom_p_or_t = -10
unit_weight = '1 2 3'
re_constant = 0.123
[]
[dirac1]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = ppgas
line_length = 1
line_direction = '-1 -1 -1'
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow1
character = -0.5
bottom_p_or_t = 10
unit_weight = '1 2 -3'
re_constant = 0.3
[]
[dirac2]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
line_direction = '1 0 1'
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow2
character = 0.6
bottom_p_or_t = -4
unit_weight = '-1 -2 -3'
re_constant = 0.4
[]
[dirac3]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
line_direction = '1 1 1'
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow3
character = -1
bottom_p_or_t = 3
unit_weight = '0.1 0.2 0.3'
re_constant = 0.5
[]
[dirac4]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
line_direction = '1 1 1'
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow4
character = 1.1
bottom_p_or_t = -7
unit_weight = '-1 2 3'
re_constant = 0.6
[]
[dirac5]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = temp
line_length = 0.9
function_of = temperature
line_direction = '1 2 3'
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow5
character = 0.9
bottom_p_or_t = -8
unit_weight = '1 2 1'
re_constant = 0.7
[]
[dirac6]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = nine_points.bh
SumQuantityUO = dummy_outflow6
character = 0
bottom_p_or_t = 10
unit_weight = '0.0 0.0 0.0'
[]
[dirac7]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
#NOTE this commented-out line: point_file = ten_points.bh
SumQuantityUO = dummy_outflow7
character = -1
bottom_p_or_t = 10
unit_weight = '0.1 0.2 0.3'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink03
[]
(modules/porous_flow/test/tests/capillary_pressure/vangenuchten2.i)
# Test van Genuchten relative permeability curve by varying saturation over the mesh
# van Genuchten exponent m = 0.5 for both phases
# No residual saturation in either phase
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[p0]
initial_condition = 1e6
[]
[s1]
[]
[]
[AuxVariables]
[s0aux]
family = MONOMIAL
order = CONSTANT
[]
[s1aux]
family = MONOMIAL
order = CONSTANT
[]
[p0aux]
family = MONOMIAL
order = CONSTANT
[]
[p1aux]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[s0]
type = PorousFlowPropertyAux
property = saturation
phase = 0
variable = s0aux
[]
[s1]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = s1aux
[]
[p0]
type = PorousFlowPropertyAux
property = pressure
phase = 0
variable = p0aux
[]
[p1]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = p1aux
[]
[]
[Functions]
[s1]
type = ParsedFunction
value = x
[]
[]
[ICs]
[s1]
type = FunctionIC
variable = s1
function = s1
[]
[]
[Kernels]
[p0]
type = Diffusion
variable = p0
[]
[s1]
type = Diffusion
variable = s1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p0 s1'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.1
log_extension = true
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = p0
phase1_saturation = s1
capillary_pressure = pc
[]
[kr0]
type = PorousFlowRelativePermeabilityVG
phase = 0
m = 0.5
[]
[kr1]
type = PorousFlowRelativePermeabilityCorey
phase = 1
n = 2
[]
[]
[VectorPostprocessors]
[vpp]
type = LineValueSampler
variable = 's0aux s1aux p0aux p1aux'
start_point = '0 0 0'
end_point = '1 0 0'
num_points = 500
sort_by = id
[]
[]
[Executioner]
type = Steady
solve_type = NEWTON
nl_abs_tol = 1e-6
[]
[BCs]
[sleft]
type = DirichletBC
variable = s1
value = 0
boundary = left
[]
[sright]
type = DirichletBC
variable = s1
value = 1
boundary = right
[]
[]
[Outputs]
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/pls03.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 3-components
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[flux_3]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 2
variable = ppwater
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_4]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 2
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls03
[]
(modules/porous_flow/test/tests/sinks/injection_production_eg.i)
# phase = 0 is liquid phase
# phase = 1 is gas phase
# fluid_component = 0 is water
# fluid_component = 1 is CO2
# Constant rate of CO2 injection into the left boundary
# 1D mesh
# The PorousFlowPiecewiseLinearSinks remove the correct water and CO2 from the right boundary
# Note i take pretty big timesteps here so the system is quite nonlinear
[Mesh]
type = GeneratedMesh
dim = 1
nx = 20
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[frac_water_in_liquid]
initial_condition = 1.0
[]
[frac_water_in_gas]
initial_condition = 0.0
[]
[]
[AuxKernels]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = timestep_end
[]
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = pgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = pgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas pwater'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[Modules]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
interpolated_properties = 'density viscosity enthalpy internal_energy'
fluid_property_file = co2_tabulated_11.csv
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 293.15
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac_water_in_liquid frac_water_in_gas'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.2
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[]
[BCs]
[co2_injection]
type = PorousFlowSink
boundary = left
variable = pgas # pgas is associated with the CO2 mass balance (fluid_component = 1 in its Kernels)
flux_function = -1E-2 # negative means a source, rather than a sink
[]
[right_water]
type = PorousFlowPiecewiseLinearSink
boundary = right
# a sink of water, since the Kernels given to pwater are for fluid_component = 0 (the water)
variable = pwater
# this Sink is a function of liquid porepressure
# Also, all the mass_fraction, mobility and relperm are referenced to the liquid phase now
fluid_phase = 0
# Sink strength = (Pwater - 20E6)
pt_vals = '0 1E9'
multipliers = '0 1E9'
PT_shift = 20E6
# multiply Sink strength computed above by mass fraction of water at the boundary
mass_fraction_component = 0
# also multiply Sink strength by mobility of the liquid
use_mobility = true
# also multiply Sink strength by the relperm of the liquid
use_relperm = true
# also multiplly Sink strength by 1/L, where L is the distance to the fixed-porepressure external environment
flux_function = 10 # 1/L
[]
[right_co2]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E9'
PT_shift = 20.1E6
mass_fraction_component = 1
use_mobility = true
use_relperm = true
flux_function = 10 # 1/L
[]
[]
[Preconditioning]
active = 'basic'
[basic]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu NONZERO 2'
[]
[preferred]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = 'lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
nl_abs_tol = 1E-13
nl_rel_tol = 1E-10
end_time = 1e4
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E4
growth_factor = 1.1
[]
[]
[VectorPostprocessors]
[pps]
type = LineValueSampler
start_point = '0 0 0'
end_point = '20 0 0'
num_points = 20
sort_by = x
variable = 'pgas pwater saturation_gas'
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
[out]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/poro_elasticity/pp_generation_unconfined.i)
# A sample is constrained on all sides, except its top
# and its boundaries are
# also impermeable. Fluid is pumped into the sample via a
# volumetric source (ie kg/second per cubic meter), and the
# rise in the top surface, porepressure, and stress are observed.
#
# In the standard poromechanics scenario, the Biot Modulus is held
# fixed and the source has units 1/time. Then the expected result
# is
# strain_zz = disp_z = BiotCoefficient*BiotModulus*s*t/((bulk + 4*shear/3) + BiotCoefficient^2*BiotModulus)
# porepressure = BiotModulus*(s*t - BiotCoefficient*strain_zz)
# stress_xx = (bulk - 2*shear/3)*strain_zz (remember this is effective stress)
# stress_zz = (bulk + 4*shear/3)*strain_zz (remember this is effective stress)
#
# In porous_flow, however, the source has units kg/s/m^3 and the
# Biot Modulus is not held fixed. This means that disp_z, porepressure,
# etc are not linear functions of t. Nevertheless, the ratios remain
# fixed:
# stress_xx/strain_zz = (bulk - 2*shear/3) = 1 (for the parameters used here)
# stress_zz/strain_zz = (bulk + 4*shear/3) = 4 (for the parameters used here)
# porepressure/strain_zz = 13.3333333 (for the parameters used here)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -0.5
xmax = 0.5
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[confinez]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'back'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[source]
type = BodyForce
function = 0.1
variable = porepressure
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3.3333333333
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '1 1.5'
# bulk modulus is lambda + 2*mu/3 = 1 + 2*1.5/3 = 2
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.3
solid_bulk = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 1 0 0 0 1' # unimportant
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = none
point = '0 0 0'
variable = porepressure
[]
[zdisp]
type = PointValue
outputs = none
point = '0 0 0.5'
variable = disp_z
[]
[stress_xx]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_xx
[]
[stress_yy]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_yy
[]
[stress_zz]
type = PointValue
outputs = none
point = '0 0 0'
variable = stress_zz
[]
[stress_xx_over_strain]
type = FunctionValuePostprocessor
function = stress_xx_over_strain_fcn
outputs = csv
[]
[stress_zz_over_strain]
type = FunctionValuePostprocessor
function = stress_zz_over_strain_fcn
outputs = csv
[]
[p_over_strain]
type = FunctionValuePostprocessor
function = p_over_strain_fcn
outputs = csv
[]
[]
[Functions]
[stress_xx_over_strain_fcn]
type = ParsedFunction
value = a/b
vars = 'a b'
vals = 'stress_xx zdisp'
[]
[stress_zz_over_strain_fcn]
type = ParsedFunction
value = a/b
vars = 'a b'
vals = 'stress_zz zdisp'
[]
[p_over_strain_fcn]
type = ParsedFunction
value = a/b
vars = 'a b'
vals = 'p0 zdisp'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-14 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
dt = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = pp_generation_unconfined
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/buckley_leverett/bl01.i)
# Buckley-Leverett 1-phase.
# The front starts at (around) x=5, and at t=50 it should
# have moved to x=9.6. The version below has a nonzero
# suction function, and at t=50, the front sits between
# (about) x=9.6 and x=9.9. Changing the van-Genuchten
# al parameter to 1E-4 softens the front so it sits between
# (about) x=9.7 and x=10.4, and the simulation runs much faster.
# With al=1E-2 and nx=600, the front sits between x=9.6 and x=9.8,
# but takes about 100 times longer to run.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 150
xmin = 0
xmax = 15
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[InitialCondition]
type = FunctionIC
function = 'max((1000000-x/5*1000000)-20000,-20000)'
[]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = left
value = 980000
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat]
type = MaterialStdVectorAux
variable = sat
execute_on = timestep_end
index = 0
property = PorousFlow_saturation_qp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-3
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e6
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-10 0 0 0 1E-10 0 0 0 1E-10'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.15
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 20'
[]
[]
[Functions]
[timestepper]
type = PiecewiseLinear
x = '0 0.01 0.1 1 1.5 2 20 30 40 50'
y = '0.01 0.1 0.2 0.3 0.1 0.3 0.3 0.4 0.4 0.5'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 50
[TimeStepper]
type = FunctionDT
function = timestepper
[]
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = pp
[]
[sat]
type = LineValueSampler
start_point = '0 0 0'
end_point = '15 0 0'
num_points = 150
sort_by = x
variable = sat
[]
[]
[Outputs]
file_base = bl01
[csv]
type = CSV
sync_only = true
sync_times = '0.01 50'
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/mass_conservation/mass09.i)
# Checking that the mass postprocessor throws the correct error when more than a single
# phase index is given when using the saturation_threshold parameter
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
saturation_threshold = 0.5
phase = '0 1'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/dirackernels/pls01.i)
# fully-saturated situation with a poly-line sink at one
# of the nodes. Because there is no fluid flow, the
# other nodes should not experience any change in
# porepressure.
# The poly-line sink has length=2 and weight=0.1, and
# extracts fluid at a constant rate of 1 kg.m^-1.s^-1.
# Therefore, in 1 second it will have extracted a total
# of 0.2 kg.
# The porosity is 0.1, and the elemental volume is 2,
# so the fluid mass at the node in question = 0.2 * density / 4,
# where the 4 is the number of nodes in the element.
# In this simulation density = dens0 * exp(P / bulk), with
# dens0 = 100, and bulk = 20 MPa.
# The initial porepressure P0 = 10 MPa, so the final (after
# 1 second of simulation) is
# P(t=1) = 0.950879 MPa
#
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
xmin = 0
xmax = 2
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pls_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
density0 = 100
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[pls]
type = PorousFlowPolyLineSink
fluid_phase = 0
point_file = pls01_21.bh
line_length = 2
SumQuantityUO = pls_total_outflow_mass
variable = pp
p_or_t_vals = '0 1E7'
fluxes = '1 1'
[]
[]
[Postprocessors]
[pls_report]
type = PorousFlowPlotQuantity
uo = pls_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p00]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[p01]
type = PointValue
variable = pp
point = '0 1 0'
execute_on = timestep_end
[]
[p20]
type = PointValue
variable = pp
point = '2 0 0'
execute_on = timestep_end
[]
[p21]
type = PointValue
variable = pp
point = '2 1 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 pls_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = 1
solve_type = NEWTON
[]
[Outputs]
file_base = pls01
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/hysteresis/2phasePS_relperm_2.i)
# Simple example of a 2-phase situation with hysteretic relative permeability. Gas is added to and removed from the system in order to observe the hysteresis
# All liquid water exists in component 0
# All gas exists in component 1
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 2
number_fluid_components = 2
porous_flow_vars = 'pp0 sat1'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp0]
[]
[sat1]
initial_condition = 0
[]
[]
[Kernels]
[mass_conservation0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp0
[]
[mass_conservation1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat1
[]
[]
[DiracKernels]
[pump]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = flux
point = '0.5 0 0'
variable = sat1
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[sat0]
family = MONOMIAL
order = CONSTANT
[]
[pp1]
family = MONOMIAL
order = CONSTANT
[]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[relperm_liquid]
family = MONOMIAL
order = CONSTANT
[]
[relperm_gas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat0]
type = PorousFlowPropertyAux
variable = sat0
phase = 0
property = saturation
[]
[relperm_liquid]
type = PorousFlowPropertyAux
variable = relperm_liquid
property = relperm
phase = 0
[]
[relperm_gas]
type = PorousFlowPropertyAux
variable = relperm_gas
property = relperm
phase = 1
[]
[pp1]
type = PorousFlowPropertyAux
variable = pp1
phase = 1
property = pressure
[]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[]
[Modules]
[FluidProperties]
[simple_fluid] # same properties used for both phases
type = SimpleFluidProperties
bulk_modulus = 10 # so pumping does not result in excessive porepressure
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 1
[]
[pc_calculator]
type = PorousFlow2PhasePS
capillary_pressure = pc
phase0_porepressure = pp0
phase1_saturation = sat1
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_liquid]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.4
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[relperm_gas]
type = PorousFlowHystereticRelativePermeabilityGas
phase = 1
S_lr = 0.4
S_gr_max = 0.2
m = 0.9
gamma = 0.33
k_rg_max = 1.0
gas_low_extension_type = linear_like
[]
[]
[Postprocessors]
[flux]
type = FunctionValuePostprocessor
function = 'if(t <= 15, 20, -20)'
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[sat0]
type = PointValue
point = '0 0 0'
variable = sat0
[]
[sat1]
type = PointValue
point = '0 0 0'
variable = sat1
[]
[kr_liq]
type = PointValue
point = '0 0 0'
variable = relperm_liquid
[]
[kr_gas]
type = PointValue
point = '0 0 0'
variable = relperm_gas
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = ' lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 5
end_time = 29
nl_abs_tol = 1E-10
[]
[Outputs]
[csv]
type = CSV
sync_times = '0 1 2 3 8 12 13 14 15 16 17 18 20 24 25 26 27 28 29'
sync_only = true
file_base = '2phasePS_relperm_2_none'
[]
[]
(modules/porous_flow/test/tests/fluidstate/coldwater_injection.i)
# Cold water injection into 1D hot reservoir (Avdonin, 1964)
#
# To generate results presented in documentation for this problem,
# set xmax = 50 and nx = 250 in the Mesh block, and dtmax = 100 and
# end_time = 1.3e5 in the Executioner block.
[Mesh]
type = GeneratedMesh
dim = 1
nx = 25
xmax = 20
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[temperature]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[temperature]
type = PorousFlowPropertyAux
variable = temperature
property = temperature
execute_on = 'initial timestep_end'
[]
[]
[Variables]
[pliquid]
initial_condition = 5e6
[]
[h]
scaling = 1e-6
[]
[]
[ICs]
[hic]
type = PorousFlowFluidPropertyIC
variable = h
porepressure = pliquid
property = enthalpy
temperature = 170
temperature_unit = Celsius
fp = water
[]
[]
[BCs]
[pleft]
type = DirichletBC
variable = pliquid
value = 5.05e6
boundary = left
[]
[pright]
type = DirichletBC
variable = pliquid
value = 5e6
boundary = right
[]
[hleft]
type = DirichletBC
variable = h
value = 678.52e3
boundary = left
[]
[hright]
type = DirichletBC
variable = h
value = 721.4e3
boundary = right
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pliquid
[]
[massflux]
type = PorousFlowAdvectiveFlux
variable = pliquid
[]
[heat]
type = PorousFlowEnergyTimeDerivative
variable = h
[]
[heatflux]
type = PorousFlowHeatAdvection
variable = h
[]
[heatcond]
type = PorousFlowHeatConduction
variable = h
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pliquid h'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
pc_max = 1e6
sat_lr = 0.1
m = 0.5
alpha = 1e-5
[]
[fs]
type = PorousFlowWaterVapor
water_fp = water
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[watervapor]
type = PorousFlowFluidStateSingleComponent
porepressure = pliquid
enthalpy = h
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.8e-11 0 0 0 1.8e-11 0 0 0 1.8e-11'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
sum_s_res = 0.1
[]
[internal_energy]
type = PorousFlowMatrixInternalEnergy
density = 2900
specific_heat_capacity = 740
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '20 0 0 0 20 0 0 0 20'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 5e3
nl_abs_tol = 1e-10
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[VectorPostprocessors]
[line]
type = ElementValueSampler
sort_by = x
variable = temperature
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
perf_graph = true
[csv]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/jacobian/mass01.i)
# 1phase
# vanGenuchten, constant-bulk density, constant porosity, 1component
# fully saturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/waterncg_gas.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions that give a single gas phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e4
max = 4e4
variable = pgas
[]
[z]
type = RandomIC
min = 0.88
max = 0.98
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e3
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar02.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# when scalar is a FunctionAux.
# k = k_anisotropy * perm
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[Functions]
[perm_fn]
type = ParsedFunction
value = '2*(x+1)'
[]
[]
[AuxVariables]
[perm_var]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[perm_var]
type = FunctionAux
function = perm_fn
variable = perm_var
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityTensorFromVar
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
perm = perm_var
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro04.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * k
# with log k = A * phi + B
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityExponential
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = log_k
A = 4.342945
B = -8
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/mass_conservation/mass10.i)
# Checking that the mass postprocessor throws the correct error when kernel_variable_numer is illegal
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
kernel_variable_number = 2
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/energy_conservation/except01.i)
# checking that the heat-energy postprocessor throws the correct error if the phase number is entered incorrectly
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[temp]
[]
[]
[ICs]
[tinit]
type = FunctionIC
function = '100*x'
variable = temp
[]
[pinit]
type = FunctionIC
function = x
variable = pp
[]
[]
[Kernels]
[dummyt]
type = TimeDerivative
variable = temp
[]
[dummyp]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
viscosity = 0.001
thermal_expansion = 0
cv = 1.3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Postprocessors]
[total_heat]
type = PorousFlowHeatEnergy
phase = 1
[]
[rock_heat]
type = PorousFlowHeatEnergy
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1 1 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = except01
csv = true
[]
(modules/porous_flow/test/tests/jacobian/fflux07.i)
# 2phase (PS), 2components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, vanGenuchten capillary pressure
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[ppgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.0
sum_s_res = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_steady.i)
# Pressure pulse in 1D with 1 phase - steady
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
active = flux
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_steady
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/jacobian/brineco2_twophase.i)
# Tests correct calculation of properties derivatives in PorousFlowFluidState
# for conditions that are appropriate for two phases
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[AuxVariables]
[xnacl]
initial_condition = 0.05
[]
[]
[Variables]
[pgas]
[]
[zi]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e6
max = 4e6
variable = pgas
seed = 1
[]
[z]
type = RandomIC
min = 0.2
max = 0.8
variable = zi
seed = 2
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = zi
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = zi
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[brine]
type = BrineFluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = pgas
z = zi
temperature_unit = Celsius
xnacl = xnacl
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except13.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = coincident_points.bh
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/adaptivity/quad_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
execute_on = 'final'
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/jacobian/hcs01.i)
# apply a half-cubic sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 2
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowHalfCubicSink
boundary = 'left'
center = 0.1
cutoff = -1.1
max = 2.2
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowHalfCubicSink
boundary = 'top left front'
center = 0.5
cutoff = -1.1
max = -2.2
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowHalfCubicSink
boundary = 'right'
center = -0.1
cutoff = -1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-1.1*x*y'
[]
[flux_2]
type = PorousFlowHalfCubicSink
boundary = 'bottom'
center = 3.2
cutoff = -1.1
max = 1.2
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = hcs01
[]
(modules/porous_flow/test/tests/infiltration_and_drainage/rd01.i)
[Mesh]
type = GeneratedMesh
dim = 2
nx = 120
ny = 1
xmin = 0
xmax = 6
ymin = 0
ymax = 0.05
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-2 1 10 500 5000 5000'
x = '0 10 100 1000 10000 100000'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pressure
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.336
alpha = 1.43e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e7
viscosity = 1.01e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[massfrac]
type = PorousFlowMassFraction
[]
[temperature]
type = PorousFlowTemperature
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.336
seff_turnover = 0.99
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.33
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.295E-12 0 0 0 0.295E-12 0 0 0 0.295E-12'
[]
[]
[Variables]
[pressure]
initial_condition = -72620.4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pressure
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pressure
gravity = '-10 0 0'
[]
[]
[AuxVariables]
[SWater]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[SWater]
type = MaterialStdVectorAux
property = PorousFlow_saturation_qp
index = 0
variable = SWater
[]
[]
[BCs]
[base]
type = PorousFlowSink
boundary = right
flux_function = -2.315E-3
variable = pressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-10 1E-10 10'
[]
[]
[VectorPostprocessors]
[swater]
type = LineValueSampler
variable = SWater
start_point = '0 0 0'
end_point = '6 0 0'
sort_by = x
num_points = 121
execute_on = timestep_end
[]
[]
[Executioner]
type = Transient
solve_type = Newton
petsc_options = '-snes_converged_reason'
end_time = 359424
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = rd01
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[along_line]
type = CSV
execute_on = final
[]
[]
(modules/porous_flow/test/tests/mass_conservation/mass07.i)
# Checking that the mass postprocessor throws the correct error if
# too many phases are supplied
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[sat]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[ICs]
[pinit]
type = ConstantIC
value = 1
variable = pp
[]
[satinit]
type = FunctionIC
function = 1-x
variable = sat
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sat
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp sat'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pp
phase1_saturation = sat
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[comp1_total_mass]
type = PorousFlowFluidMass
fluid_component = 1
phase = '0 1 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/dirackernels/theis2.i)
# Theis problem: Flow to single sink
# Constant rate injection between 200 and 1000 s.
# Cartesian mesh with logarithmic distribution in x and y.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
bias_x = 1.1
bias_y = 1.1
ymax = 100
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1000
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
file_base = theis2
[csv]
type = CSV
execute_on = final
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
start_time = 200
end_time = 1000
point = '0 0 0'
mass_flux = -0.04
variable = pp
[]
[]
[BCs]
[right]
type = DirichletBC
variable = pp
value = 20e6
boundary = right
[]
[top]
type = DirichletBC
variable = pp
value = 20e6
boundary = top
[]
[]
[VectorPostprocessors]
[pressure]
type = SideValueSampler
variable = pp
sort_by = x
execute_on = timestep_end
boundary = bottom
[]
[]
(modules/porous_flow/test/tests/jacobian/pls02.i)
# PorousFlowPiecewiseLinearSink with 2-phase, 2-components
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 3
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0 massfrac_ph1_sp0'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[BCs]
[flux_w]
type = PorousFlowPiecewiseLinearSink
boundary = 'left'
pt_vals = '-1 -0.5 0'
multipliers = '1 2 4'
variable = ppwater
mass_fraction_component = 0
fluid_phase = 0
use_relperm = true
use_mobility = true
flux_function = 'x*y'
[]
[flux_g]
type = PorousFlowPiecewiseLinearSink
boundary = 'top'
pt_vals = '0 0.5 1'
multipliers = '1 -2 4'
mass_fraction_component = 0
variable = ppgas
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '-x*y'
[]
[flux_1]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
pt_vals = '0 0.5 1'
multipliers = '1 3 4'
mass_fraction_component = 1
variable = massfrac_ph0_sp0
fluid_phase = 0
use_relperm = true
use_mobility = true
[]
[flux_2]
type = PorousFlowPiecewiseLinearSink
boundary = 'back top'
pt_vals = '0 0.5 1'
multipliers = '0 1 -3'
mass_fraction_component = 1
variable = massfrac_ph1_sp0
fluid_phase = 1
use_relperm = true
use_mobility = true
flux_function = '0.5*x*y'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
file_base = pls02
[]
(modules/porous_flow/test/tests/hysteresis/1phase_relperm_2.i)
# Simple example of a 1-phase situation with hysteretic relative permeability. Water is removed and added to the system in order to observe the hysteresis
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 1
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
number_fluid_phases = 1
number_fluid_components = 1
porous_flow_vars = 'pp'
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 10.0
m = 0.33
[]
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass_conservation]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[]
[DiracKernels]
[pump]
type = PorousFlowPointSourceFromPostprocessor
mass_flux = flux
point = '0.5 0 0'
variable = pp
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[relperm]
family = MONOMIAL
order = CONSTANT
[]
[hys_order]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sat]
type = PorousFlowPropertyAux
variable = sat
property = saturation
[]
[relperm]
type = PorousFlowPropertyAux
variable = relperm
property = relperm
phase = 0
[]
[hys_order]
type = PorousFlowPropertyAux
variable = hys_order
property = hysteresis_order
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[temperature]
type = PorousFlowTemperature
temperature = 20
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[pc_calculator]
type = PorousFlow1PhaseP
capillary_pressure = pc
porepressure = pp
[]
[hys_order_material]
type = PorousFlowHysteresisOrder
[]
[relperm_material]
type = PorousFlowHystereticRelativePermeabilityLiquid
phase = 0
S_lr = 0.1
S_gr_max = 0.2
m = 0.9
liquid_modification_range = 0.9
[]
[]
[Postprocessors]
[flux]
type = FunctionValuePostprocessor
function = 'if(t <= 3, -10, if(t <= 5, 10, if(t <= 13, -10, 10)))'
[]
[hys_order]
type = PointValue
point = '0 0 0'
variable = hys_order
[]
[sat]
type = PointValue
point = '0 0 0'
variable = sat
[]
[relperm]
type = PointValue
point = '0 0 0'
variable = relperm
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 3
end_time = 25
nl_abs_tol = 1E-10
[]
[Outputs]
[csv]
type = CSV
sync_times = '1 2 2.75 3 4 4.5 5 5.25 6 7.5 9 12 13 13.25 13.5 13.75 14 14.25 15 16 19 22 25'
sync_only = true
[]
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_2phase.i)
# Pressure pulse in 1D with 2 phases (with one having zero saturation), 2components - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = 2E6
[]
[ppgas]
initial_condition = 2E6
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = ppwater
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = ppgas
gravity = '0 0 0'
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 2e6
density0 = 1
thermal_expansion = 0
viscosity = 1e-5
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[BCs]
[leftwater]
type = DirichletBC
boundary = left
value = 3E6
variable = ppwater
[]
[leftgas]
type = DirichletBC
boundary = left
value = 3E6
variable = ppgas
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-15 1E-20 20'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = ppwater
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = ppwater
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = ppwater
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = ppwater
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = ppwater
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = ppwater
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = ppwater
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = ppwater
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = ppwater
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = ppwater
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = ppwater
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_2phase
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/mass_conservation/mass03.i)
# checking that the mass postprocessor correctly calculates the mass
# 1phase, 1component, constant porosity, with a constant fluid source
[Mesh]
type = GeneratedMesh
dim = 3
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = -0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[source]
type = BodyForce
variable = pp
value = 0.1 # kg/m^3/s
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Postprocessors]
[porepressure]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'gmres bjacobi 1E-12 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 10
[]
[Outputs]
execute_on = 'initial timestep_end'
file_base = mass03
csv = true
[]
(modules/porous_flow/test/tests/jacobian/eff_stress04.i)
# 2phase (PS)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
# RZ coordinate system
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[sgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = 0
max = 1
[]
[sgas]
type = RandomIC
variable = sgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[grad0]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 0
variable = ppwater
[]
[grad1]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
component = 1
variable = sgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater sgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 10
sat_lr = 0.01
[]
[]
[Materials]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = ppwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-snes_type'
petsc_options_value = 'test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
(modules/porous_flow/test/tests/poro_elasticity/vol_expansion.i)
# Apply an increasing porepressure, with zero mechanical forces,
# and observe the corresponding volumetric expansion
#
# P = t
# With the Biot coefficient being 0.3, the effective stresses should be
# stress_xx = stress_yy = stress_zz = 0.3t
# With bulk modulus = 1 then should have
# vol_strain = strain_xx + strain_yy + strain_zz = 0.3t.
# I use a single element lying 0<=x<=1, 0<=y<=1 and 0<=z<=1, and
# fix the left, bottom and back boundaries appropriately,
# so at the point x=y=z=1, the displacements should be
# disp_x = disp_y = disp_z = 0.3t/3 (small strain physics is used)
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[p]
[]
[]
[BCs]
[p]
type = FunctionDirichletBC
boundary = 'bottom top'
variable = p
function = t
[]
[xmin]
type = DirichletBC
boundary = left
variable = disp_x
value = 0
[]
[ymin]
type = DirichletBC
boundary = bottom
variable = disp_y
value = 0
[]
[zmin]
type = DirichletBC
boundary = back
variable = disp_z
value = 0
[]
[]
[Kernels]
[p_does_not_really_diffuse]
type = Diffusion
variable = p
[]
[TensorMechanics]
displacements = 'disp_x disp_y disp_z'
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.3
variable = disp_z
component = 2
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
[]
[]
[Postprocessors]
[corner_x]
type = PointValue
point = '1 1 1'
variable = disp_x
[]
[corner_y]
type = PointValue
point = '1 1 1'
variable = disp_y
[]
[corner_z]
type = PointValue
point = '1 1 1'
variable = disp_z
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'p'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
# bulk modulus = 1, poisson ratio = 0.2
C_ijkl = '0.5 0.75'
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
displacements = 'disp_x disp_y disp_z'
[]
[stress]
type = ComputeLinearElasticStress
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = p
capillary_pressure = pc
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_atol -ksp_rtol'
petsc_options_value = 'gmres bjacobi 1E-10 1E-10 10 1E-15 1E-10'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
dt = 0.1
end_time = 1
[]
[Outputs]
file_base = vol_expansion
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/denergy02.i)
# 2phase, 1 component, with solid displacements, time derivative of energy-density
[Mesh]
type = GeneratedMesh
dim = 3
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pgas]
[]
[pwater]
[]
[temp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas temp pwater disp_x disp_y disp_z'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
cv = 1.3
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
cv = 0.7
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.7
biot_coefficient = 0.9
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.1
density = 0.5
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/examples/tutorial/11_2D.i)
# Two-phase borehole injection problem in RZ coordinates
[Mesh]
[gen]
type = GeneratedMeshGenerator
dim = 2
nx = 10
xmin = 1.0
xmax = 10
bias_x = 1.4
ny = 3
ymin = -6
ymax = 6
[]
[aquifer]
input = gen
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 -2 0'
top_right = '10 2 0'
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x<1.0001'
included_subdomain_ids = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block_id = '0 1'
new_block_name = 'caps aquifer'
input = 'injection_area'
[]
[]
[Problem]
coord_type = RZ
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater pgas T disp_r'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
displacements = 'disp_r disp_z'
gravity = '0 0 0'
biot_coefficient = 1.0
PorousFlowDictator = dictator
[]
[Variables]
[pwater]
initial_condition = 20E6
[]
[pgas]
initial_condition = 20.1E6
[]
[T]
initial_condition = 330
scaling = 1E-5
[]
[disp_r]
scaling = 1E-5
[]
[]
[Kernels]
[mass_water_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[flux_water]
type = PorousFlowAdvectiveFlux
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[vol_strain_rate_water]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
use_displaced_mesh = false
variable = pwater
[]
[mass_co2_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[flux_co2]
type = PorousFlowAdvectiveFlux
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[vol_strain_rate_co2]
type = PorousFlowMassVolumetricExpansion
fluid_component = 1
use_displaced_mesh = false
variable = pgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
use_displaced_mesh = false
variable = T
[]
[advection]
type = PorousFlowHeatAdvection
use_displaced_mesh = false
variable = T
[]
[conduction]
type = PorousFlowHeatConduction
use_displaced_mesh = false
variable = T
[]
[vol_strain_rate_heat]
type = PorousFlowHeatVolumetricExpansion
use_displaced_mesh = false
variable = T
[]
[grad_stress_r]
type = StressDivergenceRZTensors
temperature = T
variable = disp_r
eigenstrain_names = thermal_contribution
use_displaced_mesh = false
component = 0
[]
[poro_r]
type = PorousFlowEffectiveStressCoupling
variable = disp_r
use_displaced_mesh = false
component = 0
[]
[]
[AuxVariables]
[disp_z]
[]
[effective_fluid_pressure]
family = MONOMIAL
order = CONSTANT
[]
[mass_frac_phase0_species0]
initial_condition = 1 # all water in phase=0
[]
[mass_frac_phase1_species0]
initial_condition = 0 # no water in phase=1
[]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[swater]
family = MONOMIAL
order = CONSTANT
[]
[stress_rr]
family = MONOMIAL
order = CONSTANT
[]
[stress_tt]
family = MONOMIAL
order = CONSTANT
[]
[stress_zz]
family = MONOMIAL
order = CONSTANT
[]
[porosity]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[effective_fluid_pressure]
type = ParsedAux
args = 'pwater pgas swater sgas'
function = 'pwater * swater + pgas * sgas'
variable = effective_fluid_pressure
[]
[swater]
type = PorousFlowPropertyAux
variable = swater
property = saturation
phase = 0
execute_on = timestep_end
[]
[sgas]
type = PorousFlowPropertyAux
variable = sgas
property = saturation
phase = 1
execute_on = timestep_end
[]
[stress_rr_aux]
type = RankTwoAux
variable = stress_rr
rank_two_tensor = stress
index_i = 0
index_j = 0
[]
[stress_tt]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_tt
index_i = 2
index_j = 2
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 1
index_j = 1
[]
[porosity]
type = PorousFlowPropertyAux
variable = porosity
property = porosity
execute_on = timestep_end
[]
[]
[BCs]
[pinned_top_bottom_r]
type = DirichletBC
variable = disp_r
value = 0
boundary = 'top bottom'
[]
[cavity_pressure_r]
type = Pressure
boundary = injection_area
variable = disp_r
component = 0
postprocessor = constrained_effective_fluid_pressure_at_wellbore
use_displaced_mesh = false
[]
[cold_co2]
type = DirichletBC
boundary = injection_area
variable = T
value = 290 # injection temperature
use_displaced_mesh = false
[]
[constant_co2_injection]
type = PorousFlowSink
boundary = injection_area
variable = pgas
fluid_phase = 1
flux_function = -1E-4
use_displaced_mesh = false
[]
[outer_water_removal]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pwater
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[outer_co2_removal]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pgas
fluid_phase = 1
pt_vals = '0 1E9'
multipliers = '0 1E8'
PT_shift = 20.1E6
use_mobility = true
use_relperm = true
use_displaced_mesh = false
[]
[]
[Modules]
[FluidProperties]
[true_water]
type = Water97FluidProperties
[]
[tabulated_water]
type = TabulatedFluidProperties
fp = true_water
temperature_min = 275
pressure_max = 1E8
fluid_property_file = water97_tabulated_11.csv
[]
[true_co2]
type = CO2FluidProperties
[]
[tabulated_co2]
type = TabulatedFluidProperties
fp = true_co2
temperature_min = 275
pressure_max = 1E8
fluid_property_file = co2_tabulated_11.csv
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = T
[]
[saturation_calculator]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'mass_frac_phase0_species0 mass_frac_phase1_species0'
[]
[water]
type = PorousFlowSingleComponentFluid
fp = tabulated_water
phase = 0
[]
[co2]
type = PorousFlowSingleComponentFluid
fp = tabulated_co2
phase = 1
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.1
sum_s_res = 0.2
phase = 0
[]
[relperm_co2]
type = PorousFlowRelativePermeabilityBC
nw_phase = true
lambda = 2
s_res = 0.1
sum_s_res = 0.2
phase = 1
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
porosity_zero = 0.1
reference_temperature = 330
reference_porepressure = 20E6
thermal_expansion_coeff = 15E-6 # volumetric
solid_bulk = 8E9 # unimportant since biot = 1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityKozenyCarman
block = aquifer
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-12
[]
[permeability_caps]
type = PorousFlowPermeabilityKozenyCarman
block = caps
poroperm_function = kozeny_carman_phi0
phi0 = 0.1
n = 2
m = 2
k0 = 1E-15
k_anisotropy = '1 0 0 0 1 0 0 0 0.1'
[]
[rock_thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '2 0 0 0 2 0 0 0 2'
[]
[rock_internal_energy]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1100
density = 2300
[]
[elasticity_tensor]
type = ComputeIsotropicElasticityTensor
youngs_modulus = 5E9
poissons_ratio = 0.0
[]
[strain]
type = ComputeAxisymmetricRZSmallStrain
eigenstrain_names = 'thermal_contribution initial_stress'
[]
[thermal_contribution]
type = ComputeThermalExpansionEigenstrain
temperature = T
thermal_expansion_coeff = 5E-6 # this is the linear thermal expansion coefficient
eigenstrain_name = thermal_contribution
stress_free_temperature = 330
[]
[initial_strain]
type = ComputeEigenstrainFromInitialStress
initial_stress = '20E6 0 0 0 20E6 0 0 0 20E6'
eigenstrain_name = initial_stress
[]
[stress]
type = ComputeLinearElasticStress
[]
[effective_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[volumetric_strain]
type = PorousFlowVolumetricStrain
[]
[]
[Postprocessors]
[effective_fluid_pressure_at_wellbore]
type = PointValue
variable = effective_fluid_pressure
point = '1 0 0'
execute_on = timestep_begin
use_displaced_mesh = false
[]
[constrained_effective_fluid_pressure_at_wellbore]
type = FunctionValuePostprocessor
function = constrain_effective_fluid_pressure
execute_on = timestep_begin
[]
[]
[Functions]
[constrain_effective_fluid_pressure]
type = ParsedFunction
vars = effective_fluid_pressure_at_wellbore
vals = effective_fluid_pressure_at_wellbore
value = 'max(effective_fluid_pressure_at_wellbore, 20E6)'
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E3
[TimeStepper]
type = IterationAdaptiveDT
dt = 1E3
growth_factor = 1.2
optimal_iterations = 10
[]
nl_abs_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/newton_cooling/nc06.i)
# Newton cooling from a bar. 1-phase and heat, steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 100
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[temp]
[]
[]
[ICs]
# have to start these reasonably close to their steady-state values
[pressure]
type = FunctionIC
variable = pressure
function = '(2-x/100)*1E6'
[]
[temperature]
type = FunctionIC
variable = temp
function = 100+0.1*x
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e6
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
cv = 1e6
porepressure_coefficient = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[leftp]
type = DirichletBC
variable = pressure
boundary = left
value = 2E6
[]
[leftt]
type = DirichletBC
variable = temp
boundary = left
value = 100
[]
[newtonp]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 1
[]
[newton]
type = PorousFlowPiecewiseLinearSink
variable = temp
boundary = right
pt_vals = '0 100000 200000 300000 400000 500000 600000 700000 800000 900000 1000000 1100000 1200000 1300000 1400000 1500000 1600000 1700000 1800000 1900000 2000000'
multipliers = '0. 5.6677197748570516e-6 0.000011931518841831313 0.00001885408740732065 0.000026504708864284114 0.000034959953203725676 0.000044304443352900224 0.00005463170211001232 0.00006604508815181467 0.00007865883048198513 0.00009259917167338928 0.00010800563134618119 0.00012503240252705603 0.00014384989486488752 0.00016464644014777016 0.00018763017719085535 0.0002130311349595711 0.00024110353477682344 0.00027212833465544285 0.00030641604122040985 0.00034430981736352295'
use_mobility = false
use_relperm = false
use_internal_energy = true
fluid_phase = 0
flux_function = 1
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[temperature]
type = LineValueSampler
variable = temp
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol '
petsc_options_value = 'gmres asm lu 100 NONZERO 2 1E-8 1E-15'
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
file_base = nc06
execute_on = timestep_end
exodus = true
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/gravity/grav01b.i)
# Checking that gravity head is established
# 1phase, vanGenuchten, constant and large fluid-bulk, constant viscosity, constant permeability, Corey relperm
# fully saturated
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 100
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = RandomIC
min = 0
max = 1
[]
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_pp]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 1E3 0 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[BCs]
[z]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1e3
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[]
[Postprocessors]
[pp_base]
type = PointValue
variable = pp
point = '-1 0 0'
[]
[pp_analytical]
type = FunctionValuePostprocessor
function = ana_pp
point = '-1 0 0'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
[]
[Outputs]
execute_on = 'timestep_end'
file_base = grav01b
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar01.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# k = k_anisotropy * perm
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[perm_var]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[perm_var]
type = ConstantAux
value = 2
variable = perm_var
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityTensorFromVar
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
perm = perm_var
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/jacobian/mass04.i)
# 2phase (PP)
# vanGenuchten, constant-bulk density for each phase, constant porosity, 2components (that exist in both phases)
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
[]
[massfrac_ph1_sp0]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[]
[Kernels]
[mass_sp0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[mass_sp1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/energy_conservation/heat02.i)
# checking that the heat-energy postprocessor correctly calculates the energy
# 1phase, constant porosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[temp]
[]
[pp]
[]
[]
[ICs]
[tinit]
type = FunctionIC
function = '100*x'
variable = temp
[]
[pinit]
type = FunctionIC
function = 'x'
variable = pp
[]
[]
[Kernels]
[dummyt]
type = TimeDerivative
variable = temp
[]
[dummyp]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 1
viscosity = 0.001
thermal_expansion = 0
cv = 1.3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 2.2
density = 0.5
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[]
[Postprocessors]
[total_heat]
type = PorousFlowHeatEnergy
phase = 0
[]
[rock_heat]
type = PorousFlowHeatEnergy
[]
[fluid_heat]
type = PorousFlowHeatEnergy
include_porous_skeleton = false
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1 1 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
execute_on = 'timestep_end'
file_base = heat02
csv = true
[]
(modules/porous_flow/test/tests/jacobian/waterncg_twophase_nonisothermal.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for nonisothermal two phase conditions
[Mesh]
[mesh]
type = GeneratedMeshGenerator
dim = 2
nx = 2
ny = 2
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[temperature]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 1e5
max = 5e5
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.06
variable = z
[]
[temperature]
type = RandomIC
min = 20
max = 80
variable = temperature
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[energy]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature = temperature
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1000
density = 2500
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/adaptivity/tri3_adaptivity.i)
[Mesh]
[mesh]
type = GeneratedMeshGenerator
elem_type = TRI3
dim = 2
nx = 2
ny = 2
[]
[]
[Adaptivity]
marker = marker
max_h_level = 1
[Markers]
[marker]
type = UniformMarker
mark = REFINE
[]
[]
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
[]
[Variables]
[pp]
initial_condition = '0'
[]
[]
[Kernels]
[mass]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[left]
type = DirichletBC
variable = pp
boundary = 'left'
value = 1
[]
[right]
type = DirichletBC
variable = pp
boundary = 'right'
value = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = 'pp'
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.1'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-3 0 0 0 1e-3 0 0 0 1e-3'
[]
[relperm]
type = PorousFlowRelativePermeabilityConst
phase = 0
[]
[]
[Postprocessors]
[numdofs]
type = NumDOFs
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
end_time = 4
dt = 1
solve_type = Newton
nl_abs_tol = 1e-12
[]
[Outputs]
execute_on = 'final'
exodus = true
perf_graph = true
show = pp
[]
(modules/porous_flow/test/tests/gravity/grav02d.i)
# Checking that gravity head is established in the transient situation when 0<=saturation<=1 (note the less-than-or-equal-to).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm.
# A boundary condition enforces porepressures at the right boundary
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
x = '1E-3 1E-2 1E-1 2E-1'
y = '1E-3 1E-2 0.2E-1 1E-1'
[]
[]
[Variables]
[ppwater]
initial_condition = 0
[]
[ppgas]
initial_condition = 0.5
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[BCs]
[ppwater]
type = DirichletBC
boundary = right
variable = ppwater
value = 0
[]
[ppgas]
type = DirichletBC
boundary = right
variable = ppgas
value = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 2 pp_water_top 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[ppwater_00]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[ppwater_01]
type = PointValue
variable = ppwater
point = '-0.1 0 0'
[]
[ppwater_02]
type = PointValue
variable = ppwater
point = '-0.2 0 0'
[]
[ppwater_03]
type = PointValue
variable = ppwater
point = '-0.3 0 0'
[]
[ppwater_04]
type = PointValue
variable = ppwater
point = '-0.4 0 0'
[]
[ppwater_05]
type = PointValue
variable = ppwater
point = '-0.5 0 0'
[]
[ppwater_06]
type = PointValue
variable = ppwater
point = '-0.6 0 0'
[]
[ppwater_07]
type = PointValue
variable = ppwater
point = '-0.7 0 0'
[]
[ppwater_08]
type = PointValue
variable = ppwater
point = '-0.8 0 0'
[]
[ppwater_09]
type = PointValue
variable = ppwater
point = '-0.9 0 0'
[]
[ppwater_10]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[ppgas_00]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[ppgas_01]
type = PointValue
variable = ppgas
point = '-0.1 0 0'
[]
[ppgas_02]
type = PointValue
variable = ppgas
point = '-0.2 0 0'
[]
[ppgas_03]
type = PointValue
variable = ppgas
point = '-0.3 0 0'
[]
[ppgas_04]
type = PointValue
variable = ppgas
point = '-0.4 0 0'
[]
[ppgas_05]
type = PointValue
variable = ppgas
point = '-0.5 0 0'
[]
[ppgas_06]
type = PointValue
variable = ppgas
point = '-0.6 0 0'
[]
[ppgas_07]
type = PointValue
variable = ppgas
point = '-0.7 0 0'
[]
[ppgas_08]
type = PointValue
variable = ppgas
point = '-0.8 0 0'
[]
[ppgas_09]
type = PointValue
variable = ppgas
point = '-0.9 0 0'
[]
[ppgas_10]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[]
[Preconditioning]
active = andy
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-12 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
[TimeStepper]
type = FunctionDT
function = dts
[]
end_time = 1.0
[]
[Outputs]
[csv]
type = CSV
execute_on = 'initial final'
file_base = grav02d
[]
[]
(modules/porous_flow/test/tests/sinks/s04.i)
# apply a piecewise-linear sink flux and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y+1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-5 0 0 0 1E-5 0 0 0 1E-5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[xval]
[]
[yval]
[]
[pt_shift]
initial_condition = 0.3
[]
[]
[ICs]
[xval]
type = FunctionIC
variable = xval
function = x
[]
[yval]
type = FunctionIC
variable = yval
function = y
[]
[]
[Functions]
[mass10]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)'
vars = 'vol por dens0 pp bulk'
vals = '0.25 0.1 1.1 p10 1.3'
[]
[rate10]
type = ParsedFunction
value = 'fcn*if(pp>0.8,1,if(pp<0.3,0.5,0.2+pp))'
vars = 'fcn pp'
vals = '8 p10'
[]
[mass10_expect]
type = ParsedFunction
value = 'mass_prev-rate*area*dt'
vars = 'mass_prev rate area dt'
vals = 'm10_prev m10_rate 0.5 1E-3'
[]
[mass11]
type = ParsedFunction
value = 'vol*por*dens0*exp(pp/bulk)'
vars = 'vol por dens0 pp bulk'
vals = '0.25 0.1 1.1 p11 1.3'
[]
[rate11]
type = ParsedFunction
value = 'fcn*if(pp>0.8,1,if(pp<0.3,0.5,0.2+pp))'
vars = 'fcn pp'
vals = '8 p11'
[]
[mass11_expect]
type = ParsedFunction
value = 'mass_prev-rate*area*dt'
vars = 'mass_prev rate area dt'
vals = 'm11_prev m11_rate 0.5 1E-3'
[]
[]
[Postprocessors]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p10]
type = PointValue
point = '1 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m10]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'initial timestep_end'
[]
[m10_prev]
type = FunctionValuePostprocessor
function = mass10
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m10_rate]
type = FunctionValuePostprocessor
function = rate10
execute_on = 'timestep_end'
[]
[m10_expect]
type = FunctionValuePostprocessor
function = mass10_expect
execute_on = 'timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m11]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'initial timestep_end'
[]
[m11_prev]
type = FunctionValuePostprocessor
function = mass11
execute_on = 'timestep_begin'
outputs = 'console'
[]
[m11_rate]
type = FunctionValuePostprocessor
function = rate11
execute_on = 'timestep_end'
[]
[m11_expect]
type = FunctionValuePostprocessor
function = mass11_expect
execute_on = 'timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
PT_shift = pt_shift
pt_vals = '0.0 0.5'
multipliers = '0.5 1'
variable = pp
use_mobility = false
use_relperm = false
fluid_phase = 0
flux_function = 8
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10000 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 1E-2
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s04
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]
(modules/porous_flow/test/tests/gravity/grav02a.i)
# Checking that gravity head is established in the transient situation when 0<saturation<1 (note the strictly less-than).
# 2phase (PP), 2components, vanGenuchten, constant fluid bulk-moduli for each phase, constant viscosity, constant permeability, Corey relative perm
# For better agreement with the analytical solution (ana_pp), just increase nx
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = -1
xmax = 0
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
initial_condition = -1.0
[]
[ppgas]
initial_condition = 0
[]
[]
[AuxVariables]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = ppwater
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 0 0'
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = ppgas
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 0 0'
[]
[]
[Functions]
[ana_ppwater]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 2 pp_water_top 1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[ana_ppgas]
type = ParsedFunction
vars = 'g B p0 rho0'
vals = '1 1 pp_gas_top 0.1'
value = '-B*log(exp(-p0/B)+g*rho0*x/B)' # expected pp at base
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 2
density0 = 1
viscosity = 1
thermal_expansion = 0
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.1
viscosity = 0.5
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 0
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 1
phase = 1
[]
[]
[Postprocessors]
[pp_water_top]
type = PointValue
variable = ppwater
point = '0 0 0'
[]
[pp_water_base]
type = PointValue
variable = ppwater
point = '-1 0 0'
[]
[pp_water_analytical]
type = FunctionValuePostprocessor
function = ana_ppwater
point = '-1 0 0'
[]
[pp_gas_top]
type = PointValue
variable = ppgas
point = '0 0 0'
[]
[pp_gas_base]
type = PointValue
variable = ppgas
point = '-1 0 0'
[]
[pp_gas_analytical]
type = FunctionValuePostprocessor
function = ana_ppgas
point = '-1 0 0'
[]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 0.1
end_time = 1.0
nl_rel_tol = 1E-10
nl_abs_tol = 1E-12
[]
[Outputs]
[csv]
type = CSV
file_base = grav02a
execute_on = 'initial final'
[]
[]
(modules/porous_flow/test/tests/jacobian/line_sink04.i)
# PorousFlowPolyLineSink with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 2
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.2 0.3 0.2 0 0.1 0.3 0.1 0.1'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow
p_or_t_vals = '-0.9 1.5'
fluxes = '-1.1 2.2'
[]
[dirac1]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = ppgas
line_length = 1
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -2.2'
[]
[dirac2]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac3]
type = PorousFlowPolyLineSink
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac4]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac5]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = temp
line_length = 0.9
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '1.1 -0.2'
[]
[dirac6]
type = PorousFlowPolyLineSink
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
function_of = temperature
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = ten_points.bh
SumQuantityUO = dummy_outflow
p_or_t_vals = '-1.9 1.5'
fluxes = '0 -0.2'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink04
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_adaptivity.i)
# Pressure pulse in 1D with 1 phase - transient simulation with a constant
# PorousFlowPorosity and mesh adaptivity with an indicator
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[Adaptivity]
marker = marker
[Markers]
[marker]
type = ErrorFractionMarker
indicator = front
refine = 0.5
coarsen = 0.2
[]
[]
[Indicators]
[front]
type = GradientJumpIndicator
variable = pp
[]
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
preset = false
value = 3E6
variable = pp
[]
[right]
type = PorousFlowPiecewiseLinearSink
variable = pp
boundary = right
fluid_phase = 0
pt_vals = '0 1E9'
multipliers = '0 1E9'
mass_fraction_component = 0
use_mobility = true
flux_function = 1E-6
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1e3
end_time = 5e3
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh02.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
# Because the Variable for this Sink is pp, and pp is associated
# with the fluid-mass conservation equation, this sink is extracting
# fluid mass (and not heat energy or something else)
variable = pp
# The following specfies that the total fluid mass coming out of
# the porespace via this sink in this timestep should be recorded
# in the pls_total_outflow_mass UserObject
SumQuantityUO = borehole_total_outflow_mass
# The following file defines the polyline geometry
# which is just two points in this particular example
point_file = bh02.bh
# First, we want Peacemans f to be a function of porepressure (and not
# temperature or something else). So bottom_p_or_t is actually porepressure
function_of = pressure
fluid_phase = 0
# The bottomhole pressure
bottom_p_or_t = 0
# In this example there is no increase of the wellbore pressure
# due to gravity:
unit_weight = '0 0 0'
# PeacemanBoreholes should almost always have use_mobility = true
use_mobility = true
# This is a production wellbore (a sink of fluid that removes fluid from porespace)
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
file_base = bh02
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/poroperm/PermTensorFromVar03.i)
# Testing permeability calculated from scalar and tensor
# Trivial test, checking calculated permeability is correct
# when k_anisotropy is not specified.
# k = k_anisotropy * perm
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[perm_var]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[perm_var]
type = ConstantAux
value = 2
variable = perm_var
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_left]
type = PointValue
variable = perm_x
point = '0.5 0 0'
[]
[perm_y_left]
type = PointValue
variable = perm_y
point = '0.5 0 0'
[]
[perm_z_left]
type = PointValue
variable = perm_z
point = '0.5 0 0'
[]
[perm_x_right]
type = PointValue
variable = perm_x
point = '2.5 0 0'
[]
[perm_y_right]
type = PointValue
variable = perm_y
point = '2.5 0 0'
[]
[perm_z_right]
type = PointValue
variable = perm_z
point = '2.5 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
[]
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityTensorFromVar
perm = perm_var
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/dirackernels/bh07.i)
# Comparison with analytical solution for cylindrically-symmetric situation
[Mesh]
type = FileMesh
file = bh07_input.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1000 10000'
x = '100 1000'
[]
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fflux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[]
[BCs]
[fix_outer]
type = DirichletBC
boundary = perimeter
variable = pp
value = 1E7
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-11 0 0 0 1E-11 0 0 0 1E-11'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh07.bh
fluid_phase = 0
bottom_p_or_t = 0
unit_weight = '0 0 0'
use_mobility = true
re_constant = 0.1594 # use Chen and Zhang version
character = 2 # double the strength because bh07.bh only fills half the mesh
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
execute_on = 'initial timestep_end'
[]
[fluid_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[VectorPostprocessors]
[pp]
type = LineValueSampler
variable = pp
start_point = '0 0 0'
end_point = '300 0 0'
sort_by = x
num_points = 300
execute_on = timestep_end
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1E3
solve_type = NEWTON
[TimeStepper]
# get only marginally better results for smaller time steps
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bh07
[along_line]
type = CSV
execute_on = final
[]
[exodus]
type = Exodus
execute_on = 'initial final'
[]
[]
(modules/porous_flow/examples/tutorial/10.i)
# Unsaturated Darcy-Richards flow without using an Action
[Mesh]
[annular]
type = AnnularMeshGenerator
nr = 10
rmin = 1.0
rmax = 10
growth_r = 1.4
nt = 4
dmin = 0
dmax = 90
[]
[make3D]
input = annular
type = MeshExtruderGenerator
extrusion_vector = '0 0 12'
num_layers = 3
bottom_sideset = 'bottom'
top_sideset = 'top'
[]
[shift_down]
type = TransformGenerator
transform = TRANSLATE
vector_value = '0 0 -6'
input = make3D
[]
[aquifer]
type = SubdomainBoundingBoxGenerator
block_id = 1
bottom_left = '0 0 -2'
top_right = '10 10 2'
input = shift_down
[]
[injection_area]
type = ParsedGenerateSideset
combinatorial_geometry = 'x*x+y*y<1.01'
included_subdomain_ids = 1
new_sideset_name = 'injection_area'
input = 'aquifer'
[]
[rename]
type = RenameBlockGenerator
old_block_id = '0 1'
new_block_name = 'caps aquifer'
input = 'injection_area'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = pp
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1E-6
m = 0.6
[]
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[Kernels]
[time_derivative]
type = PorousFlowMassTimeDerivative
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
[]
[]
[AuxVariables]
[sat]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[saturation]
type = PorousFlowPropertyAux
variable = sat
property = saturation
[]
[]
[BCs]
[production]
type = PorousFlowSink
variable = pp
fluid_phase = 0
flux_function = 1E-2
use_relperm = true
boundary = injection_area
[]
[]
[Modules]
[FluidProperties]
[the_simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E9
viscosity = 1.0E-3
density0 = 1000.0
[]
[]
[]
[Materials]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[permeability_aquifer]
type = PorousFlowPermeabilityConst
block = aquifer
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[permeability_caps]
type = PorousFlowPermeabilityConst
block = caps
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-16'
[]
[saturation_calculator]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[temperature]
type = PorousFlowTemperature
temperature = 293
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = the_simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 3
s_res = 0.1
sum_s_res = 0.1
phase = 0
[]
[]
[Preconditioning]
active = basic
[basic]
type = SMP
full = true
petsc_options = '-ksp_diagonal_scale -ksp_diagonal_scale_fix'
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = ' asm lu NONZERO 2'
[]
[preferred_but_might_not_be_installed]
type = SMP
full = true
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu mumps'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1E6
dt = 1E5
nl_abs_tol = 1E-7
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/examples/co2_intercomparison/1Dradial/1Dradial.i)
# Intercomparison problem 3: Radial flow from an injection well
#
# From Pruess et al, Code intercomparison builds confidence in
# numerical simulation models for geologic disposal of CO2, Energy 29 (2004)
#
# A variation with zero salinity can be run by changing the initial condition
# of the AuxVariable xnacl
[Mesh]
type = GeneratedMesh
dim = 1
nx = 500
xmax = 10000
bias_x = 1.01
[]
[Problem]
type = FEProblem
coord_type = 'RZ'
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = 'dictator'
gravity = '0 0 0'
[]
[AuxVariables]
[pressure_liquid]
order = CONSTANT
family = MONOMIAL
[]
[saturation_gas]
order = CONSTANT
family = MONOMIAL
[]
[x1]
order = CONSTANT
family = MONOMIAL
[]
[y0]
order = CONSTANT
family = MONOMIAL
[]
[xnacl]
initial_condition = 0.15
[]
[]
[AuxKernels]
[pressure_liquid]
type = PorousFlowPropertyAux
variable = pressure_liquid
property = pressure
phase = 0
execute_on = 'timestep_end'
[]
[saturation_gas]
type = PorousFlowPropertyAux
variable = saturation_gas
property = saturation
phase = 1
execute_on = 'timestep_end'
[]
[x1]
type = PorousFlowPropertyAux
variable = x1
property = mass_fraction
phase = 0
fluid_component = 1
execute_on = 'timestep_end'
[]
[y0]
type = PorousFlowPropertyAux
variable = y0
property = mass_fraction
phase = 1
fluid_component = 0
execute_on = 'timestep_end'
[]
[]
[Variables]
[pgas]
initial_condition = 12e6
[]
[zi]
initial_condition = 0
scaling = 1e4
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pgas
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = zi
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = zi
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas zi'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 5.099e-5
m = 0.457
sat_lr = 0.0
pc_max = 1e7
[]
[fs]
type = PorousFlowBrineCO2
brine_fp = brine
co2_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2sw]
type = CO2FluidProperties
[]
[co2]
type = TabulatedFluidProperties
fp = co2sw
[]
[water]
type = Water97FluidProperties
[]
[watertab]
type = TabulatedFluidProperties
fp = water
temperature_min = 273.15
temperature_max = 573.15
fluid_property_file = water_fluid_properties.csv
save_file = false
[]
[brine]
type = BrineFluidProperties
water_fp = watertab
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = '45'
[]
[brineco2]
type = PorousFlowFluidState
gas_porepressure = 'pgas'
z = 'zi'
temperature_unit = Celsius
xnacl = 'xnacl'
capillary_pressure = pc
fluid_state = fs
[]
[porosity]
type = PorousFlowPorosityConst
porosity = '0.12'
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 1e-13 0 0 0 1e-13'
[]
[relperm_water]
type = PorousFlowRelativePermeabilityVG
m = 0.457
phase = 0
s_res = 0.3
sum_s_res = 0.35
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.05
sum_s_res = 0.35
[]
[]
[BCs]
[rightwater]
type = PorousFlowPiecewiseLinearSink
boundary = 'right'
variable = pgas
use_mobility = true
PorousFlowDictator = dictator
fluid_phase = 0
multipliers = '0 1e9'
PT_shift = '12e6'
pt_vals = '0 1e9'
mass_fraction_component = 0
use_relperm = true
[]
[rightco2]
type = PorousFlowPiecewiseLinearSink
variable = zi
boundary = 'right'
use_mobility = true
PorousFlowDictator = dictator
fluid_phase = 1
multipliers = '0 1e9'
PT_shift = '12e6'
pt_vals = '0 1e9'
mass_fraction_component = 1
use_relperm = true
[]
[]
[DiracKernels]
[source]
type = PorousFlowSquarePulsePointSource
point = '0 0 0'
mass_flux = 1
variable = zi
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = 'gmres bjacobi lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
end_time = 8.64e8
nl_max_its = 25
l_max_its = 100
dtmax = 5e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 100
[]
[]
[VectorPostprocessors]
[vars]
type = NodalValueSampler
sort_by = x
variable = 'pgas zi xnacl'
execute_on = 'timestep_end'
outputs = spatial
[]
[auxvars]
type = ElementValueSampler
sort_by = x
variable = 'saturation_gas x1 y0'
execute_on = 'timestep_end'
outputs = spatial
[]
[]
[Postprocessors]
[pgas]
type = PointValue
point = '25.25 0 0'
variable = pgas
outputs = time
[]
[sgas]
type = PointValue
point = '25.25 0 0'
variable = saturation_gas
outputs = time
[]
[zi]
type = PointValue
point = '25.25 0 0'
variable = zi
outputs = time
[]
[massgas]
type = PorousFlowFluidMass
fluid_component = 1
outputs = time
[]
[x1]
type = PointValue
point = '25.25 0 0'
variable = x1
outputs = time
[]
[y0]
type = PointValue
point = '25.25 0 0'
variable = y0
outputs = time
[]
[xnacl]
type = PointValue
point = '25.25 0 0'
variable = xnacl
outputs = time
[]
[]
[Outputs]
print_linear_residuals = false
perf_graph = true
sync_times = '2.592e6 8.64e6 8.64e7 8.64e8'
[time]
type = CSV
[]
[spatial]
type = CSV
sync_only = true
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh03.i)
# fully-saturated
# injection
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh03.bh
function_of = pressure
fluid_phase = 0
bottom_p_or_t = 1E7
unit_weight = '0 0 0'
use_mobility = true
character = -1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
[Outputs]
file_base = bh03
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/dirackernels/bh_except12.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = does_not_exist
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection2.i)
# Basic advection with 1 porepressure as a PorousFlow variable
# Fully saturated
# Constant permeability
# Constant viscosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro02.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * k0 * (1-phi0)^m/phi0^n * phi^n/(1-phi)^m
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_phi0
k0 = 1e-10
phi0 = 0.05
m = 2
n = 7
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/dirackernels/bh_except08.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
at_nodes = false # Needed to force expected error
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/newton_cooling/nc08.i)
# Newton cooling from a bar. 1-phase ideal fluid and heat, steady
[Mesh]
type = GeneratedMesh
dim = 2
nx = 100
ny = 1
xmin = 0
xmax = 100
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pressure temp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Variables]
[pressure]
[]
[temp]
[]
[]
[ICs]
# have to start these reasonably close to their steady-state values
[pressure]
type = FunctionIC
variable = pressure
function = '200-0.5*x'
[]
[temperature]
type = FunctionIC
variable = temp
function = 180+0.1*x
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
fluid_component = 0
gravity = '0 0 0'
variable = pressure
[]
[heat_advection]
type = PorousFlowHeatAdvection
gravity = '0 0 0'
variable = temp
[]
[]
[Modules]
[FluidProperties]
[idealgas]
type = IdealGasFluidProperties
molar_mass = 1.4
gamma = 1.2
mu = 1.2
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[dens0]
type = PorousFlowSingleComponentFluid
fp = idealgas
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.1 0 0 0 1.1 0 0 0 1.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey # irrelevant in this fully-saturated situation
n = 2
phase = 0
[]
[]
[BCs]
[leftp]
type = DirichletBC
variable = pressure
boundary = left
value = 200
[]
[leftt]
type = DirichletBC
variable = temp
boundary = left
value = 180
[]
[newtonp]
type = PorousFlowPiecewiseLinearSink
variable = pressure
boundary = right
pt_vals = '-200 0 200'
multipliers = '-200 0 200'
use_mobility = true
use_relperm = true
fluid_phase = 0
flux_function = 0.005 # 1/2/L
[]
[newtont]
type = PorousFlowPiecewiseLinearSink
variable = temp
boundary = right
pt_vals = '-200 0 200'
multipliers = '-200 0 200'
use_mobility = true
use_relperm = true
use_enthalpy = true
fluid_phase = 0
flux_function = 0.005 # 1/2/L
[]
[]
[VectorPostprocessors]
[porepressure]
type = LineValueSampler
variable = pressure
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[temperature]
type = LineValueSampler
variable = temp
start_point = '0 0.5 0'
end_point = '100 0.5 0'
sort_by = x
num_points = 11
execute_on = timestep_end
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Steady
solve_type = Newton
nl_rel_tol = 1E-10
nl_abs_tol = 1E-15
[]
[Outputs]
file_base = nc08
execute_on = timestep_end
exodus = true
[along_line]
type = CSV
execute_vector_postprocessors_on = timestep_end
[]
[]
(modules/porous_flow/test/tests/desorption/desorption02.i)
# Illustrates desorption works as planned.
#
# A mesh contains 3 elements in arranged in a line.
# The central element contains desorped fluid.
# This desorps to the nodes of that element.
#
# In the central element, of volume V, the following occurs.
# The initial porepressure=1, and concentration=1.
# The initial mass of fluid is
# V * (2 * porosity * density + (1 - porosity) * concentration)
# = V * 1.289547
# Notice the factor of "2" in the porespace contribution:
# it is because the porepressure is evaluated at nodes, so
# the nodes on the exterior of the centre_block have
# nodal-volume contributions from the elements not in centre_block.
#
# The mass-conservation equation reads
# 2 * porosity * density + (1 - porosity) * concentration = 1.289547
# and the desorption equation reads
# d( (1-porosity)C )/dt = - (1/tau)(C - dens_L * P / (P_L + P))
# where C = concentration, P = porepressure, P_L = Langmuir pressure
# dens_L = Langmuir density, tau = time constant.
# Using the mass-conservation equation in the desorption equation
# yields a nonlinear equation of P. For dt=1, and the numerical values
# given below this yields
# P = 1.83697
# and
# C = 0.676616
# The desired result is achieved by MOOSE
[Mesh]
type = FileMesh
file = three_eles.e
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[conc]
family = MONOMIAL
order = CONSTANT
block = centre_block
[]
[]
[ICs]
[p_ic]
type = ConstantIC
variable = pp
value = 1.0
[]
[conc_ic]
type = ConstantIC
variable = conc
value = 1.0
block = centre_block
[]
[]
[Kernels]
[porespace_mass_dot]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[fluid_flow]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '0 0 0'
[]
[desorped_mass_dot]
type = PorousFlowDesorpedMassTimeDerivative
block = centre_block
conc_var = conc
variable = pp
[]
[desorped_mass_dot_conc_var]
type = PorousFlowDesorpedMassTimeDerivative
block = centre_block
conc_var = conc
variable = conc
[]
[flow_from_matrix]
type = DesorptionFromMatrix
block = centre_block
variable = conc
pressure_var = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp conc'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
viscosity = 1
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[lang_stuff]
type = LangmuirMaterial
block = centre_block
one_over_adsorption_time_const = 10.0
one_over_desorption_time_const = 10.0
langmuir_density = 1
langmuir_pressure = 1
pressure_var = pp
conc_var = conc
[]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 1
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = true
[]
(modules/porous_flow/test/tests/jacobian/desorped_mass_vol_exp01.i)
# Tests the PorousFlowDesorpedMassVolumetricExpansion kernel
# Fluid with constant bulk modulus, van-Genuchten capillary, HM porosity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[conc]
family = MONOMIAL
order = CONSTANT
[]
[]
[ICs]
[disp_x]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_x
[]
[disp_y]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_y
[]
[disp_z]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_z
[]
[p]
type = RandomIC
min = -1
max = 1
variable = porepressure
[]
[conc]
type = RandomIC
min = 0
max = 1
variable = conc
[]
[]
[BCs]
# necessary otherwise volumetric strain rate will be zero
[disp_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[disp_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'left right'
[]
[disp_z]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'left right'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
displacements = 'disp_x disp_y disp_z'
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
displacements = 'disp_x disp_y disp_z'
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
displacements = 'disp_x disp_y disp_z'
component = 2
[]
[poro]
type = PorousFlowMassVolumetricExpansion
fluid_component = 0
variable = porepressure
[]
[conc_in_poro]
type = PorousFlowDesorpedMassVolumetricExpansion
conc_var = conc
variable = porepressure
[]
[conc]
type = PorousFlowDesorpedMassVolumetricExpansion
conc_var = conc
variable = conc
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z conc'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-5
[]
[Outputs]
execute_on = 'timestep_end'
file_base = jacobian2
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/fflux11.i)
# 1phase, 3components, constant viscosity, constant insitu permeability
# density with constant bulk, VG relative perm with a cubic, nonzero gravity, unsaturated with VG
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[massfrac0]
[]
[massfrac1]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = -1.0
max = 0.0
[]
[massfrac0]
type = RandomIC
variable = massfrac0
min = 0
max = 0.3
[]
[massfrac1]
type = RandomIC
variable = massfrac1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pp
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = massfrac0
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac1
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.6
alpha = 1 # small so that most effective saturations are close to 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm]
type = PorousFlowRelativePermeabilityVG
m = 0.6
seff_turnover = 0.8
phase = 0
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/mass03.i)
# 1phase
# vanGenuchten, constant-bulk density, constant porosity, 3components
# unsaturated
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[mass_frac_comp0]
[]
[mass_frac_comp1]
[]
[]
[ICs]
[pp]
type = RandomIC
variable = pp
min = -1
max = 0
[]
[mass_frac_comp0]
type = RandomIC
variable = mass_frac_comp0
min = 0
max = 0.3
[]
[mass_frac_comp1]
type = RandomIC
variable = mass_frac_comp1
min = 0
max = 0.3
[]
[]
[Kernels]
[mass_comp0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[masscomp1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = mass_frac_comp0
[]
[masscomp2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = mass_frac_comp1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp mass_frac_comp0 mass_frac_comp1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
s_scale = 0.9
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'mass_frac_comp0 mass_frac_comp1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/mass01_nodens.i)
# 1phase
# vanGenuchten, constant-bulk density, constant porosity, 1component
# fully saturated
# multiply_by_density = false
[Mesh]
type = GeneratedMesh
dim = 2
nx = 1
ny = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
multiply_by_density = false
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 2
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/flux_limited_TVD_pflow/jacobian_04.i)
# Checking the Jacobian of Flux-Limited TVD Advection, 1 phase, 1 component, unsaturated, using flux_limiter_type != none
# This is quite a heavy test, but we need a fairly big mesh to check the flux-limiting+TVD is happening correctly
#
# Here we use snes_check_jacobian instead of snes_type=test. The former just checks the Jacobian for the
# random initial conditions, while the latter checks for u=1 and u=-1
#
# The Jacobian is correct for u=1 and u=-1, but the finite-difference scheme used by snes_type=test gives the
# wrong answer.
# For u=constant, the Kuzmin-Turek scheme adds as much antidiffusion as possible, resulting in a central-difference
# version of advection (flux_limiter = 1). This is correct, and the Jacobian is calculated correctly.
# However, when computing the Jacobian using finite differences, u is increased or decreased at a node.
# This results in that node being at a maximum or minimum, which means no antidiffusion should be added
# (flux_limiter = 0). This corresponds to a full-upwind scheme. So the finite-difference computes the
# Jacobian in the full-upwind scenario, which is incorrect (the original residual = 0, after finite-differencing
# the residual comes from the full-upwind scenario).
[Mesh]
type = GeneratedMesh
dim = 3
nx = 3
xmin = 0
xmax = 1
ny = 4
ymin = -1
ymax = 2
bias_y = 1.5
nz = 4
zmin = 1
zmax = 2
bias_z = 0.8
[]
[GlobalParams]
gravity = '1 2 -0.5'
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[]
[]
[ICs]
[pp]
variable = pp
type = RandomIC
min = -1
max = 0
[]
[]
[Kernels]
[flux0]
type = PorousFlowFluxLimitedTVDAdvection
variable = pp
advective_flux_calculator = advective_flux_calculator
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1
density0 = 0.4
viscosity = 1.1
[]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.5
[]
[advective_flux_calculator]
type = PorousFlowAdvectiveFluxCalculatorUnsaturated
flux_limiter_type = minmod
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
phase = 0
n = 2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.21 0 0 0 1.5 0 0 0 0.8'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options = '-snes_check_jacobian'
[]
[]
[Executioner]
type = Transient
solve_type = Linear # this is to force convergence even though the nonlinear residual is high: we just care about the Jacobian in this test
end_time = 1
num_steps = 1
dt = 1
[]
(modules/porous_flow/test/tests/poroperm/PermFromPoro01.i)
# Testing permeability from porosity
# Trivial test, checking calculated permeability is correct
# k = k_anisotropic * f * d^2 * phi^n / (1-phi)^m
[Mesh]
type = GeneratedMesh
dim = 1
nx = 3
xmin = 0
xmax = 3
[]
[GlobalParams]
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[pp]
[InitialCondition]
type = ConstantIC
value = 0
[]
[]
[]
[Kernels]
[flux]
type = PorousFlowAdvectiveFlux
gravity = '0 0 0'
variable = pp
[]
[]
[BCs]
[ptop]
type = DirichletBC
variable = pp
boundary = right
value = 0
[]
[pbase]
type = DirichletBC
variable = pp
boundary = left
value = 1
[]
[]
[AuxVariables]
[poro]
order = CONSTANT
family = MONOMIAL
[]
[perm_x]
order = CONSTANT
family = MONOMIAL
[]
[perm_y]
order = CONSTANT
family = MONOMIAL
[]
[perm_z]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[poro]
type = PorousFlowPropertyAux
property = porosity
variable = poro
[]
[perm_x]
type = PorousFlowPropertyAux
property = permeability
variable = perm_x
row = 0
column = 0
[]
[perm_y]
type = PorousFlowPropertyAux
property = permeability
variable = perm_y
row = 1
column = 1
[]
[perm_z]
type = PorousFlowPropertyAux
property = permeability
variable = perm_z
row = 2
column = 2
[]
[]
[Postprocessors]
[perm_x_bottom]
type = PointValue
variable = perm_x
point = '0 0 0'
[]
[perm_y_bottom]
type = PointValue
variable = perm_y
point = '0 0 0'
[]
[perm_z_bottom]
type = PointValue
variable = perm_z
point = '0 0 0'
[]
[perm_x_top]
type = PointValue
variable = perm_x
point = '3 0 0'
[]
[perm_y_top]
type = PointValue
variable = perm_y
point = '3 0 0'
[]
[perm_z_top]
type = PointValue
variable = perm_z
point = '3 0 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
# unimportant in this fully-saturated test
m = 0.8
alpha = 1e-4
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2.2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
k_anisotropy = '1 0 0 0 2 0 0 0 0.1'
poroperm_function = kozeny_carman_fd2
f = 0.1
d = 5
m = 2
n = 7
[]
[temperature]
type = PorousFlowTemperature
[]
[massfrac]
type = PorousFlowMassFraction
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
solve_type = Newton
type = Steady
l_tol = 1E-5
nl_abs_tol = 1E-3
nl_rel_tol = 1E-8
l_max_its = 200
nl_max_its = 400
petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
petsc_options_value = ' asm 2 lu gmres 200'
[]
[Outputs]
csv = true
execute_on = 'timestep_end'
[]
(modules/porous_flow/test/tests/jacobian/waterncg_liquid.i)
# Tests correct calculation of properties derivatives in PorousFlowWaterNCG
# for conditions that give a single liquid phase
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
ny = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pgas]
[]
[z]
[]
[]
[ICs]
[pgas]
type = RandomIC
min = 6e6
max = 8e6
variable = pgas
[]
[z]
type = RandomIC
min = 0.01
max = 0.05
variable = z
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pgas
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = z
fluid_component = 1
[]
[adv0]
type = PorousFlowAdvectiveFlux
variable = pgas
fluid_component = 0
[]
[adv1]
type = PorousFlowAdvectiveFlux
variable = z
fluid_component = 1
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas z'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
pc_max = 1e4
[]
[fs]
type = PorousFlowWaterNCG
water_fp = water
gas_fp = co2
capillary_pressure = pc
[]
[]
[Modules]
[FluidProperties]
[co2]
type = CO2FluidProperties
[]
[water]
type = Water97FluidProperties
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[waterncg]
type = PorousFlowFluidState
gas_porepressure = pgas
z = z
temperature_unit = Celsius
capillary_pressure = pc
fluid_state = fs
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[]
[Executioner]
type = Transient
solve_type = NEWTON
dt = 1
end_time = 1
nl_abs_tol = 1e-12
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[AuxVariables]
[sgas]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[sgas]
type = PorousFlowPropertyAux
property = saturation
phase = 1
variable = sgas
[]
[]
[Postprocessors]
[sgas_min]
type = ElementExtremeValue
variable = sgas
value_type = min
[]
[sgas_max]
type = ElementExtremeValue
variable = sgas
value_type = max
[]
[]
(modules/porous_flow/test/tests/dirackernels/bh_except07.i)
# PorousFlowPeacemanBorehole exception test
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 1E7
[]
[]
[Kernels]
[mass0]
type = TimeDerivative
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
bottom_p_or_t = 0
fluid_phase = 0
point_file = bh02.bh
use_mobility = true
SumQuantityUO = borehole_total_outflow_mass
variable = pp
unit_weight = '0 0 0'
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 1E-2
solve_type = NEWTON
[]
(modules/porous_flow/test/tests/jacobian/basic_advection3.i)
# Basic advection with 1 porepressure as a PorousFlow variable
# Constant permeability
# Constant viscosity
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = -1
max = 0
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '5 0 0 0 5 0 0 0 5'
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.1
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/jacobian/basic_advection5.i)
# Basic advection with 1 porepressure as a PorousFlow variable
[Mesh]
type = GeneratedMesh
dim = 1
nx = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[u]
[]
[P]
[]
[]
[ICs]
[P]
type = RandomIC
variable = P
min = -1
max = 1
[]
[u]
type = RandomIC
variable = u
[]
[]
[Kernels]
[dummy_P]
type = NullKernel
variable = P
[]
[u_advection]
type = PorousFlowBasicAdvection
variable = u
phase = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = P
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1
m = 0.6
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 3
density0 = 4
thermal_expansion = 0
viscosity = 150.0
[]
[]
[]
[Materials]
[temperature_qp]
type = PorousFlowTemperature
[]
[ppss_qp]
type = PorousFlow1PhaseP
porepressure = P
capillary_pressure = pc
[]
[simple_fluid_qp]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[effective_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[porosity]
type = PorousFlowPorosity
porosity_zero = 0.1
fluid = true
biot_coefficient = 0.5
solid_bulk = 1
[]
[permeability]
type = PorousFlowPermeabilityKozenyCarman
poroperm_function = kozeny_carman_phi0
k0 = 5
m = 2
n = 2
phi0 = 0.1
[]
[relperm_qp]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[darcy_velocity_qp]
type = PorousFlowDarcyVelocityMaterial
gravity = '0.25 0 0'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-snes_type'
petsc_options_value = ' test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1
[]
(modules/porous_flow/test/tests/poro_elasticity/terzaghi_constM.i)
# Terzaghi's problem of consolodation of a drained medium
#
# A saturated soil sample sits in a bath of water.
# It is constrained on its sides, and bottom.
# Its sides and bottom are also impermeable.
# Initially it is unstressed.
# A normal stress, q, is applied to the soil's top.
# The soil then slowly compresses as water is squeezed
# out from the sample from its top (the top BC for
# the porepressure is porepressure = 0).
#
# See, for example. Section 2.2 of the online manuscript
# Arnold Verruijt "Theory and Problems of Poroelasticity" Delft University of Technology 2013
# but note that the "sigma" in that paper is the negative
# of the stress in TensorMechanics
#
# Here are the problem's parameters, and their values:
# Soil height. h = 10
# Soil's Lame lambda. la = 2
# Soil's Lame mu, which is also the Soil's shear modulus. mu = 3
# Soil bulk modulus. K = la + 2*mu/3 = 4
# Soil confined compressibility. m = 1/(K + 4mu/3) = 0.125
# Soil bulk compliance. 1/K = 0.25
# Fluid bulk modulus. Kf = 8
# Fluid bulk compliance. 1/Kf = 0.125
# Fluid mobility (soil permeability/fluid viscosity). k = 1.5
# Soil initial porosity. phi0 = 0.1
# Biot coefficient. alpha = 0.6
# Soil initial storativity, which is the reciprocal of the initial Biot modulus. S = phi0/Kf + (alpha - phi0)(1 - alpha)/K = 0.0625
# Consolidation coefficient. c = k/(S + alpha^2 m) = 13.95348837
# Normal stress on top. q = 1
# Initial porepressure, resulting from instantaneous application of q, assuming corresponding instantaneous increase of porepressure (Note that this is calculated by MOOSE: we only need it for the analytical solution). p0 = alpha*m*q/(S + alpha^2 m) = 0.69767442
# Initial vertical displacement (down is positive), resulting from instantaneous application of q (Note this is calculated by MOOSE: we only need it for the analytical solution). uz0 = q*m*h*S/(S + alpha^2 m)
# Final vertical displacement (down in positive) (Note this is calculated by MOOSE: we only need it for the analytical solution). uzinf = q*m*h
#
# The solution for porepressure is
# P = 4*p0/\pi \sum_{k=1}^{\infty} \frac{(-1)^{k-1}}{2k-1} \cos ((2k-1)\pi z/(2h)) \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
# This series converges very slowly for ct/h^2 small, so in that domain
# P = p0 erf( (1-(z/h))/(2 \sqrt(ct/h^2)) )
#
# The degree of consolidation is defined as
# U = (uz - uz0)/(uzinf - uz0)
# where uz0 and uzinf are defined above, and
# uz = the vertical displacement of the top (down is positive)
# U = 1 - (8/\pi^2)\sum_{k=1}^{\infty} \frac{1}{(2k-1)^2} \exp(-(2k-1)^2 \pi^2 ct/(4 h^2))
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 10
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = 0
zmax = 10
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
PorousFlowDictator = dictator
block = 0
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[]
[BCs]
[confinex]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[confiney]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'bottom top'
[]
[basefixed]
type = DirichletBC
variable = disp_z
value = 0
boundary = back
[]
[topdrained]
type = DirichletBC
variable = porepressure
value = 0
boundary = front
[]
[topload]
type = NeumannBC
variable = disp_z
value = -1
boundary = front
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
biot_coefficient = 0.6
component = 2
variable = disp_z
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
variable = porepressure
fluid_component = 0
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = porepressure
gravity = '0 0 0'
fluid_component = 0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 8
density0 = 1
thermal_expansion = 0
viscosity = 0.96
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
# bulk modulus is lambda + 2*mu/3 = 2 + 2*3/3 = 4
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityHMBiotModulus
porosity_zero = 0.1
biot_coefficient = 0.6
solid_bulk = 4
constant_fluid_bulk_modulus = 8
constant_biot_modulus = 16
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1.5 0 0 0 1.5 0 0 0 1.5'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0 # unimportant in this fully-saturated situation
phase = 0
[]
[]
[Postprocessors]
[p0]
type = PointValue
outputs = csv
point = '0 0 0'
variable = porepressure
use_displaced_mesh = false
[]
[p1]
type = PointValue
outputs = csv
point = '0 0 1'
variable = porepressure
use_displaced_mesh = false
[]
[p2]
type = PointValue
outputs = csv
point = '0 0 2'
variable = porepressure
use_displaced_mesh = false
[]
[p3]
type = PointValue
outputs = csv
point = '0 0 3'
variable = porepressure
use_displaced_mesh = false
[]
[p4]
type = PointValue
outputs = csv
point = '0 0 4'
variable = porepressure
use_displaced_mesh = false
[]
[p5]
type = PointValue
outputs = csv
point = '0 0 5'
variable = porepressure
use_displaced_mesh = false
[]
[p6]
type = PointValue
outputs = csv
point = '0 0 6'
variable = porepressure
use_displaced_mesh = false
[]
[p7]
type = PointValue
outputs = csv
point = '0 0 7'
variable = porepressure
use_displaced_mesh = false
[]
[p8]
type = PointValue
outputs = csv
point = '0 0 8'
variable = porepressure
use_displaced_mesh = false
[]
[p9]
type = PointValue
outputs = csv
point = '0 0 9'
variable = porepressure
use_displaced_mesh = false
[]
[p99]
type = PointValue
outputs = csv
point = '0 0 10'
variable = porepressure
use_displaced_mesh = false
[]
[zdisp]
type = PointValue
outputs = csv
point = '0 0 10'
variable = disp_z
use_displaced_mesh = false
[]
[dt]
type = FunctionValuePostprocessor
outputs = console
function = if(0.5*t<0.1,0.5*t,0.1)
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
start_time = 0
end_time = 10
[TimeStepper]
type = PostprocessorDT
postprocessor = dt
dt = 0.0001
[]
[]
[Outputs]
execute_on = 'timestep_end'
file_base = terzaghi_constM
[csv]
type = CSV
[]
[]
(modules/porous_flow/test/tests/jacobian/mass10.i)
# 1phase
# vanGenuchten, constant-bulk density, HM porosity, 1component, unsaturated
[Mesh]
type = GeneratedMesh
dim = 3
xmin = -1
xmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
displacements = 'disp_x disp_y disp_z'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[pp]
[]
[]
[ICs]
[disp_x]
type = RandomIC
variable = disp_x
min = -0.1
max = 0.1
[]
[disp_y]
type = RandomIC
variable = disp_y
min = -0.1
max = 0.1
[]
[disp_z]
type = RandomIC
variable = disp_z
min = -0.1
max = 0.1
[]
[pp]
type = RandomIC
variable = pp
min = -1
max = 1
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
component = 2
[]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
strain_at_nearest_qp = true
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '0.5 0.75'
# bulk modulus is lambda + 2*mu/3 = 0.5 + 2*0.75/3 = 1
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
strain_at_nearest_qp = true
[]
[nearest_qp]
type = PorousFlowNearestQp
[]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d_3comp.i)
# Pressure pulse in 1D with 1 phase but 3 components (viscosity, relperm, etc are independent of mass-fractions) - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[massfrac0]
initial_condition = 0.1
[]
[massfrac1]
initial_condition = 0.3
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = massfrac0
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = massfrac0
gravity = '0 0 0'
fluid_component = 1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = massfrac1
[]
[flux2]
type = PorousFlowAdvectiveFlux
variable = massfrac1
gravity = '0 0 0'
fluid_component = 2
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp massfrac0 massfrac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac0 massfrac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options = '-snes_converged_reason -ksp_diagonal_scale -ksp_diagonal_scale_fix -ksp_gmres_modifiedgramschmidt -snes_linesearch_monitor'
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -sub_pc_factor_shift_type -pc_asm_overlap -snes_atol -snes_rtol -snes_max_it -ksp_rtol -ksp_atol'
petsc_options_value = 'gmres asm lu NONZERO 2 1E-7 1E-10 20 1E-10 1E-100'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[mf_0_010]
type = PointValue
variable = massfrac0
point = '10 0 0'
execute_on = 'timestep_end'
[]
[mf_1_010]
type = PointValue
variable = massfrac1
point = '10 0 0'
execute_on = 'timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d_3comp
print_linear_residuals = true
exodus = true
csv = true
[]
(modules/porous_flow/examples/restart/gas_injection_new_mesh.i)
# Using the results from the equilibrium run to provide the initial condition for
# porepressure, we now inject a gas phase into the brine-saturated reservoir. In this
# example, the mesh is not identical to the mesh used in gravityeq.i. Rather, it is
# generated so that it is more refined near the injection boundary and at the top of
# the model, as that is where the gas plume will be present.
#
# To use the hydrostatic pressure calculated using the gravity equilibrium run as the initial
# condition for the pressure, a SolutionUserObject is used, along with a SolutionFunction to
# interpolate the pressure from the gravity equilibrium run to the initial condition for liqiud
# porepressure in this example.
#
# Even though the gravity equilibrium is established using a 2D mesh, in this example,
# we use a mesh shifted 0.1 m to the right and rotate it about the Y axis to make a 2D radial
# model.
#
# Methane injection takes place over the surface of the hole created by rotating the mesh,
# and hence the injection area is 2 pi r h. We can calculate this using an AreaPostprocessor,
# and then use this in a ParsedFunction to calculate the injection rate so that 10 kg/s of
# methane is injected.
#
# Note: as this example uses the results from a previous simulation, gravityeq.i MUST be
# run before running this input file.
[Mesh]
type = GeneratedMesh
dim = 2
ny = 25
nx = 50
ymax = 100
xmin = 0.1
xmax = 5000
bias_x = 1.05
bias_y = 0.95
[]
[Problem]
coord_type = RZ
rz_coord_axis = Y
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 -9.81 0'
temperature_unit = Celsius
[]
[Variables]
[pp_liq]
[]
[sat_gas]
initial_condition = 0
[]
[]
[ICs]
[ppliq_ic]
type = FunctionIC
variable = pp_liq
function = ppliq_ic
[]
[]
[AuxVariables]
[temperature]
initial_condition = 50
[]
[xnacl]
initial_condition = 0.1
[]
[brine_density]
family = MONOMIAL
order = CONSTANT
[]
[methane_density]
family = MONOMIAL
order = CONSTANT
[]
[massfrac_ph0_sp0]
initial_condition = 1
[]
[massfrac_ph1_sp0]
initial_condition = 0
[]
[pp_gas]
family = MONOMIAL
order = CONSTANT
[]
[sat_liq]
family = MONOMIAL
order = CONSTANT
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
variable = pp_liq
[]
[flux0]
type = PorousFlowAdvectiveFlux
variable = pp_liq
[]
[mass1]
type = PorousFlowMassTimeDerivative
variable = sat_gas
fluid_component = 1
[]
[flux1]
type = PorousFlowAdvectiveFlux
variable = sat_gas
fluid_component = 1
[]
[]
[AuxKernels]
[brine_density]
type = PorousFlowPropertyAux
property = density
variable = brine_density
execute_on = 'initial timestep_end'
[]
[methane_density]
type = PorousFlowPropertyAux
property = density
variable = methane_density
phase = 1
execute_on = 'initial timestep_end'
[]
[pp_gas]
type = PorousFlowPropertyAux
property = pressure
phase = 1
variable = pp_gas
execute_on = 'initial timestep_end'
[]
[sat_liq]
type = PorousFlowPropertyAux
property = saturation
variable = sat_liq
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[gas_injection]
type = PorousFlowSink
boundary = left
variable = sat_gas
flux_function = injection_rate
fluid_phase = 1
[]
[brine_out]
type = PorousFlowPiecewiseLinearSink
boundary = right
variable = pp_liq
multipliers = '0 1e9'
pt_vals = '0 1e9'
fluid_phase = 0
flux_function = 1e-6
use_mobility = true
use_relperm = true
mass_fraction_component = 0
[]
[]
[Functions]
[injection_rate]
type = ParsedFunction
vals = injection_area
vars = area
value = '-1/area'
[]
[ppliq_ic]
type = SolutionFunction
solution = soln
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp_liq sat_gas'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
alpha = 1e-5
m = 0.5
sat_lr = 0.2
pc_max = 1e7
[]
[soln]
type = SolutionUserObject
mesh = gravityeq_out.e
system_variables = porepressure
[]
[]
[Modules]
[FluidProperties]
[brine]
type = BrineFluidProperties
[]
[methane]
type = MethaneFluidProperties
[]
[methane_tab]
type = TabulatedFluidProperties
fp = methane
save_file = false
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[ps]
type = PorousFlow2PhasePS
phase0_porepressure = pp_liq
phase1_saturation = sat_gas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph1_sp0'
[]
[brine]
type = PorousFlowBrine
compute_enthalpy = false
compute_internal_energy = false
xnacl = xnacl
phase = 0
[]
[methane]
type = PorousFlowSingleComponentFluid
compute_enthalpy = false
compute_internal_energy = false
fp = methane_tab
phase = 1
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-13 0 0 0 5e-14 0 0 0 1e-13'
[]
[relperm_liq]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.2
sum_s_res = 0.3
[]
[relperm_gas]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 1
s_res = 0.1
sum_s_res = 0.3
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
petsc_options_iname = '-pc_type -sub_pc_type -sub_pc_factor_shift_type'
petsc_options_value = ' asm lu NONZERO'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
end_time = 1e8
nl_abs_tol = 1e-12
nl_rel_tol = 1e-06
nl_max_its = 20
dtmax = 1e6
[TimeStepper]
type = IterationAdaptiveDT
dt = 1e1
growth_factor = 1.5
[]
[]
[Postprocessors]
[mass_ph0]
type = PorousFlowFluidMass
fluid_component = 0
execute_on = 'initial timestep_end'
[]
[mass_ph1]
type = PorousFlowFluidMass
fluid_component = 1
execute_on = 'initial timestep_end'
[]
[injection_area]
type = AreaPostprocessor
boundary = left
execute_on = initial
[]
[]
[Outputs]
execute_on = 'initial timestep_end'
exodus = true
perf_graph = true
[]
(modules/porous_flow/test/tests/actions/addmaterials.i)
# Test that the PorousFlowAddMaterialAction correctly handles the case where
# materials are added with the default add_nodes parameter, as well as
# at_nodes = true, to make sure that the action doesn't add a duplicate material
[Mesh]
type = GeneratedMesh
dim = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
gravity = '0 0 0'
[]
[Variables]
[pwater]
initial_condition = 1e6
[]
[sgas]
initial_condition = 0.3
[]
[temperature]
initial_condition = 50
[]
[]
[AuxVariables]
[x0]
initial_condition = 0.1
[]
[x1]
initial_condition = 0.5
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pwater
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = sgas
[]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = pwater
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = sgas
[]
[energy_dot]
type = PorousFlowEnergyTimeDerivative
variable = temperature
[]
[heat_advection]
type = PorousFlowHeatAdvection
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pwater sgas temperature'
number_fluid_phases = 2
number_fluid_components = 2
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-5
pc_max = 1e7
sat_lr = 0.1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
cv = 2
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 1e9
viscosity = 1e-4
density0 = 20
thermal_expansion = 0
cv = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = 50
[]
[temperature_nodal]
type = PorousFlowTemperature
at_nodes = true
temperature = 50
[]
[ppss]
type = PorousFlow2PhasePS
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[ppss_nodal]
type = PorousFlow2PhasePS
at_nodes = true
phase0_porepressure = pwater
phase1_saturation = sgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'x0 x1'
[]
[massfrac_nodal]
type = PorousFlowMassFraction
at_nodes = true
mass_fraction_vars = 'x0 x1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid0_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[simple_fluid1_nodal]
type = PorousFlowSingleComponentFluid
at_nodes = true
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1e-12 0 0 0 1e-12 0 0 0 1e-12'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
s_res = 0.1
sum_s_res = 0.11
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
s_res = 0.01
sum_s_res = 0.11
[]
[relperm0_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
at_nodes = true
[]
[relperm1_nodal]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
at_nodes = true
[]
[porosity_nodal]
type = PorousFlowPorosityConst
porosity = 0.1
at_nodes = true
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.0
density = 125
[]
[unused]
type = GenericConstantMaterial
prop_names = unused
prop_values = 0
[]
[]
[Executioner]
type = Transient
end_time = 1
nl_abs_tol = 1e-14
[]
(modules/porous_flow/test/tests/jacobian/hcond02.i)
# 2phase heat conduction
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pgas]
[]
[pwater]
[]
[temp]
[]
[]
[ICs]
[pgas]
type = RandomIC
variable = pgas
max = 1.0
min = 0.0
[]
[pwater]
type = RandomIC
variable = pwater
max = 0.0
min = -1.0
[]
[temp]
type = RandomIC
variable = temp
max = 1.0
min = 0.0
[]
[]
[Kernels]
[dummy_pgas]
type = Diffusion
variable = pgas
[]
[dummy_pwater]
type = Diffusion
variable = pwater
[]
[heat_conduction]
type = PorousFlowHeatConduction
variable = temp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pgas temp pwater'
number_fluid_phases = 2
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '1.1 0.1 0.3 0.1 2.2 0 0.3 0 3.3'
wet_thermal_conductivity = '2.1 0.1 0.3 0.1 1.2 0 0.3 0 1.1'
exponent = 1.7
aqueous_phase_number = 1
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = pwater
phase1_porepressure = pgas
capillary_pressure = pc
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/examples/coal_mining/coarse_with_fluid.i)
# Strata deformation and fluid flow aaround a coal mine - 3D model
#
# A "half model" is used. The mine is 400m deep and
# just the roof is studied (-400<=z<=0). The mining panel
# sits between 0<=x<=150, and 0<=y<=1000, so this simulates
# a coal panel that is 300m wide and 1000m long. The outer boundaries
# are 1km from the excavation boundaries.
#
# The excavation takes 0.5 years.
#
# The boundary conditions for this simulation are:
# - disp_x = 0 at x=0 and x=1150
# - disp_y = 0 at y=-1000 and y=1000
# - disp_z = 0 at z=-400, but there is a time-dependent
# Young modulus that simulates excavation
# - wc_x = 0 at y=-1000 and y=1000
# - wc_y = 0 at x=0 and x=1150
# - no flow at x=0, z=-400 and z=0
# - fixed porepressure at y=-1000, y=1000 and x=1150
# That is, rollers on the sides, free at top,
# and prescribed at bottom in the unexcavated portion.
#
# A single-phase unsaturated fluid is used.
#
# The small strain formulation is used.
#
# All stresses are measured in MPa, and time units are measured in years.
#
# The initial porepressure is hydrostatic with P=0 at z=0, so
# Porepressure ~ - 0.01*z MPa, where the fluid has density 1E3 kg/m^3 and
# gravity = = 10 m.s^-2 = 1E-5 MPa m^2/kg.
# To be more accurate, i use
# Porepressure = -bulk * log(1 + g*rho0*z/bulk)
# where bulk=2E3 MPa and rho0=1Ee kg/m^3.
# The initial stress is consistent with the weight force from undrained
# density 2500 kg/m^3, and fluid porepressure, and a Biot coefficient of 0.7, ie,
# stress_zz^effective = 0.025*z + 0.7 * initial_porepressure
# The maximum and minimum principal horizontal effective stresses are
# assumed to be equal to 0.8*stress_zz.
#
# Material properties:
# Young's modulus = 8 GPa
# Poisson's ratio = 0.25
# Cosserat layer thickness = 1 m
# Cosserat-joint normal stiffness = large
# Cosserat-joint shear stiffness = 1 GPa
# MC cohesion = 2 MPa
# MC friction angle = 35 deg
# MC dilation angle = 8 deg
# MC tensile strength = 1 MPa
# MC compressive strength = 100 MPa
# WeakPlane cohesion = 0.1 MPa
# WeakPlane friction angle = 30 deg
# WeakPlane dilation angle = 10 deg
# WeakPlane tensile strength = 0.1 MPa
# WeakPlane compressive strength = 100 MPa softening to 1 MPa at strain = 1
# Fluid density at zero porepressure = 1E3 kg/m^3
# Fluid bulk modulus = 2E3 MPa
# Fluid viscosity = 1.1E-3 Pa.s = 1.1E-9 MPa.s = 3.5E-17 MPa.year
#
[GlobalParams]
perform_finite_strain_rotations = false
displacements = 'disp_x disp_y disp_z'
Cosserat_rotations = 'wc_x wc_y wc_z'
PorousFlowDictator = dictator
biot_coefficient = 0.7
[]
[Mesh]
[file]
type = FileMeshGenerator
file = mesh/coarse.e
[]
[xmin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = xmin
normal = '-1 0 0'
input = file
[]
[xmax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = xmax
normal = '1 0 0'
input = xmin
[]
[ymin]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = ymin
normal = '0 -1 0'
input = xmax
[]
[ymax]
type = SideSetsAroundSubdomainGenerator
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
new_boundary = ymax
normal = '0 1 0'
input = ymin
[]
[zmax]
type = SideSetsAroundSubdomainGenerator
block = 16
new_boundary = zmax
normal = '0 0 1'
input = ymax
[]
[zmin]
type = SideSetsAroundSubdomainGenerator
block = 2
new_boundary = zmin
normal = '0 0 -1'
input = zmax
[]
[excav]
type = SubdomainBoundingBoxGenerator
input = zmin
block_id = 1
bottom_left = '0 0 -400'
top_right = '150 1000 -397'
[]
[roof]
type = SideSetsBetweenSubdomainsGenerator
primary_block = 3
paired_block = 1
input = excav
new_boundary = roof
[]
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[wc_x]
[]
[wc_y]
[]
[porepressure]
scaling = 1E-5
[]
[]
[ICs]
[porepressure]
type = FunctionIC
variable = porepressure
function = ini_pp
[]
[]
[Kernels]
[cx_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[cy_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[cz_elastic]
type = CosseratStressDivergenceTensors
use_displaced_mesh = false
variable = disp_z
component = 2
[]
[x_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_x
displacements = 'wc_x wc_y wc_z'
component = 0
base_name = couple
[]
[y_couple]
type = StressDivergenceTensors
use_displaced_mesh = false
variable = wc_y
displacements = 'wc_x wc_y wc_z'
component = 1
base_name = couple
[]
[x_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_x
component = 0
[]
[y_moment]
type = MomentBalancing
use_displaced_mesh = false
variable = wc_y
component = 1
[]
[gravity]
type = Gravity
use_displaced_mesh = false
variable = disp_z
value = -10E-6 # remember this is in MPa
[]
[poro_x]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_x
component = 0
[]
[poro_y]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
variable = disp_y
component = 1
[]
[poro_z]
type = PorousFlowEffectiveStressCoupling
use_displaced_mesh = false
component = 2
variable = disp_z
[]
[mass0]
type = PorousFlowMassTimeDerivative
use_displaced_mesh = false
fluid_component = 0
variable = porepressure
[]
[flux]
type = PorousFlowAdvectiveFlux
use_displaced_mesh = false
variable = porepressure
gravity = '0 0 -10E-6'
fluid_component = 0
[]
[poro_vol_exp]
type = PorousFlowMassVolumetricExpansion
use_displaced_mesh = false
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
variable = porepressure
fluid_component = 0
[]
[]
[AuxVariables]
[saturation]
order = CONSTANT
family = MONOMIAL
[]
[darcy_x]
order = CONSTANT
family = MONOMIAL
[]
[darcy_y]
order = CONSTANT
family = MONOMIAL
[]
[darcy_z]
order = CONSTANT
family = MONOMIAL
[]
[porosity]
order = CONSTANT
family = MONOMIAL
[]
[wc_z]
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xz]
order = CONSTANT
family = MONOMIAL
[]
[stress_yx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_yz]
order = CONSTANT
family = MONOMIAL
[]
[stress_zx]
order = CONSTANT
family = MONOMIAL
[]
[stress_zy]
order = CONSTANT
family = MONOMIAL
[]
[stress_zz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_xz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_yz]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zx]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zy]
order = CONSTANT
family = MONOMIAL
[]
[total_strain_zz]
order = CONSTANT
family = MONOMIAL
[]
[perm_xx]
order = CONSTANT
family = MONOMIAL
[]
[perm_yy]
order = CONSTANT
family = MONOMIAL
[]
[perm_zz]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile]
order = CONSTANT
family = MONOMIAL
[]
[wp_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[wp_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_shear_f]
order = CONSTANT
family = MONOMIAL
[]
[mc_tensile_f]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[saturation_water]
type = PorousFlowPropertyAux
variable = saturation
property = saturation
phase = 0
execute_on = timestep_end
[]
[darcy_x]
type = PorousFlowDarcyVelocityComponent
variable = darcy_x
gravity = '0 0 -10E-6'
component = x
[]
[darcy_y]
type = PorousFlowDarcyVelocityComponent
variable = darcy_y
gravity = '0 0 -10E-6'
component = y
[]
[darcy_z]
type = PorousFlowDarcyVelocityComponent
variable = darcy_z
gravity = '0 0 -10E-6'
component = z
[]
[porosity]
type = PorousFlowPropertyAux
property = porosity
variable = porosity
execute_on = timestep_end
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[stress_xz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[stress_yx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[stress_yz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[stress_zx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[stress_zy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[stress_zz]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[total_strain_xx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xx
index_i = 0
index_j = 0
execute_on = timestep_end
[]
[total_strain_xy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xy
index_i = 0
index_j = 1
execute_on = timestep_end
[]
[total_strain_xz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_xz
index_i = 0
index_j = 2
execute_on = timestep_end
[]
[total_strain_yx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yx
index_i = 1
index_j = 0
execute_on = timestep_end
[]
[total_strain_yy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yy
index_i = 1
index_j = 1
execute_on = timestep_end
[]
[total_strain_yz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_yz
index_i = 1
index_j = 2
execute_on = timestep_end
[]
[total_strain_zx]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zx
index_i = 2
index_j = 0
execute_on = timestep_end
[]
[total_strain_zy]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zy
index_i = 2
index_j = 1
execute_on = timestep_end
[]
[total_strain_zz]
type = RankTwoAux
rank_two_tensor = total_strain
variable = total_strain_zz
index_i = 2
index_j = 2
execute_on = timestep_end
[]
[perm_xx]
type = PorousFlowPropertyAux
property = permeability
variable = perm_xx
row = 0
column = 0
execute_on = timestep_end
[]
[perm_yy]
type = PorousFlowPropertyAux
property = permeability
variable = perm_yy
row = 1
column = 1
execute_on = timestep_end
[]
[perm_zz]
type = PorousFlowPropertyAux
property = permeability
variable = perm_zz
row = 2
column = 2
execute_on = timestep_end
[]
[mc_shear]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_internal_parameter
variable = mc_shear
execute_on = timestep_end
[]
[mc_tensile]
type = MaterialStdVectorAux
index = 1
property = mc_plastic_internal_parameter
variable = mc_tensile
execute_on = timestep_end
[]
[wp_shear]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_internal_parameter
variable = wp_shear
execute_on = timestep_end
[]
[wp_tensile]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_internal_parameter
variable = wp_tensile
execute_on = timestep_end
[]
[mc_shear_f]
type = MaterialStdVectorAux
index = 6
property = mc_plastic_yield_function
variable = mc_shear_f
execute_on = timestep_end
[]
[mc_tensile_f]
type = MaterialStdVectorAux
index = 0
property = mc_plastic_yield_function
variable = mc_tensile_f
execute_on = timestep_end
[]
[wp_shear_f]
type = MaterialStdVectorAux
index = 0
property = wp_plastic_yield_function
variable = wp_shear_f
execute_on = timestep_end
[]
[wp_tensile_f]
type = MaterialStdVectorAux
index = 1
property = wp_plastic_yield_function
variable = wp_tensile_f
execute_on = timestep_end
[]
[]
[BCs]
[no_x]
type = DirichletBC
variable = disp_x
boundary = 'xmin xmax'
value = 0.0
[]
[no_y]
type = DirichletBC
variable = disp_y
boundary = 'ymin ymax'
value = 0.0
[]
[no_z]
type = DirichletBC
variable = disp_z
boundary = zmin
value = 0.0
[]
[no_wc_x]
type = DirichletBC
variable = wc_x
boundary = 'ymin ymax'
value = 0.0
[]
[no_wc_y]
type = DirichletBC
variable = wc_y
boundary = 'xmin xmax'
value = 0.0
[]
[fix_porepressure]
type = FunctionDirichletBC
variable = porepressure
boundary = 'ymin ymax xmax'
function = ini_pp
[]
[roof_porepressure]
type = PorousFlowPiecewiseLinearSink
variable = porepressure
pt_vals = '-1E3 1E3'
multipliers = '-1 1'
fluid_phase = 0
flux_function = roof_conductance
boundary = roof
[]
[roof_bcs]
type = StickyBC
variable = disp_z
min_value = -3.0
boundary = roof
[]
[]
[Functions]
[ini_pp]
type = ParsedFunction
vars = 'bulk p0 g rho0'
vals = '2E3 0.0 1E-5 1E3'
value = '-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)'
[]
[ini_xx]
type = ParsedFunction
vars = 'bulk p0 g rho0 biot'
vals = '2E3 0.0 1E-5 1E3 0.7'
value = '0.8*(2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk)))'
[]
[ini_zz]
type = ParsedFunction
vars = 'bulk p0 g rho0 biot'
vals = '2E3 0.0 1E-5 1E3 0.7'
value = '2500*10E-6*z+biot*(-bulk*log(exp(-p0/bulk)+g*rho0*z/bulk))'
[]
[excav_sideways]
type = ParsedFunction
vars = 'end_t ymin ymax minval maxval slope'
vals = '0.5 0 1000.0 1E-9 1 60'
# excavation face at ymin+(ymax-ymin)*min(t/end_t,1)
# slope is the distance over which the modulus reduces from maxval to minval
value = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,if(y<ymin+(ymax-ymin)*min(t/end_t,1)+slope,minval+(maxval-minval)*(y-(ymin+(ymax-ymin)*min(t/end_t,1)))/slope,maxval))'
[]
[density_sideways]
type = ParsedFunction
vars = 'end_t ymin ymax minval maxval'
vals = '0.5 0 1000.0 0 2500'
value = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),minval,maxval)'
[]
[roof_conductance]
type = ParsedFunction
vars = 'end_t ymin ymax maxval minval'
vals = '0.5 0 1000.0 1E7 0'
value = 'if(y<ymin+(ymax-ymin)*min(t/end_t,1),maxval,minval)'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1 # MPa^-1
[]
[mc_coh_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.99 # MPa
value_residual = 2.01 # MPa
rate = 1.0
[]
[mc_fric]
type = TensorMechanicsHardeningConstant
value = 0.61 # 35deg
[]
[mc_dil]
type = TensorMechanicsHardeningConstant
value = 0.15 # 8deg
[]
[mc_tensile_str_strong_harden]
type = TensorMechanicsHardeningExponential
value_0 = 1.0 # MPa
value_residual = 1.0 # MPa
rate = 1.0
[]
[mc_compressive_str]
type = TensorMechanicsHardeningCubic
value_0 = 100 # Large!
value_residual = 100
internal_limit = 0.1
[]
[wp_coh_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_tan_fric]
type = TensorMechanicsHardeningConstant
value = 0.26 # 15deg
[]
[wp_tan_dil]
type = TensorMechanicsHardeningConstant
value = 0.18 # 10deg
[]
[wp_tensile_str_harden]
type = TensorMechanicsHardeningCubic
value_0 = 0.05
value_residual = 0.05
internal_limit = 10
[]
[wp_compressive_str_soften]
type = TensorMechanicsHardeningCubic
value_0 = 100
value_residual = 1
internal_limit = 1.0
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2E3
density0 = 1000
thermal_expansion = 0
viscosity = 3.5E-17
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[eff_fluid_pressure]
type = PorousFlowEffectiveFluidPressure
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity_bulk]
type = PorousFlowPorosity
fluid = true
mechanical = true
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
ensure_positive = true
porosity_zero = 0.02
solid_bulk = 5.3333E3
[]
[porosity_excav]
type = PorousFlowPorosityConst
block = 1
porosity = 1.0
[]
[permeability_bulk]
type = PorousFlowPermeabilityKozenyCarman
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
poroperm_function = kozeny_carman_phi0
k0 = 1E-15
phi0 = 0.02
n = 2
m = 2
[]
[permeability_excav]
type = PorousFlowPermeabilityConst
block = 1
permeability = '0 0 0 0 0 0 0 0 0'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 4
s_res = 0.4
sum_s_res = 0.4
phase = 0
[]
[elasticity_tensor_0]
type = ComputeLayeredCosseratElasticityTensor
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
[]
[elasticity_tensor_1]
type = ComputeLayeredCosseratElasticityTensor
block = 1
young = 8E3 # MPa
poisson = 0.25
layer_thickness = 1.0
joint_normal_stiffness = 1E9 # huge
joint_shear_stiffness = 1E3 # MPa
elasticity_tensor_prefactor = excav_sideways
[]
[strain]
type = ComputeCosseratIncrementalSmallStrain
eigenstrain_names = ini_stress
[]
[ini_stress]
type = ComputeEigenstrainFromInitialStress
eigenstrain_name = ini_stress
initial_stress = 'ini_xx 0 0 0 ini_xx 0 0 0 ini_zz'
[]
[stress_0]
type = ComputeMultipleInelasticCosseratStress
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
inelastic_models = 'mc wp'
cycle_models = true
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[stress_1]
type = ComputeMultipleInelasticCosseratStress
block = 1
inelastic_models = ''
relative_tolerance = 2.0
absolute_tolerance = 1E6
max_iterations = 1
tangent_operator = nonlinear
perform_finite_strain_rotations = false
[]
[mc]
type = CappedMohrCoulombCosseratStressUpdate
warn_about_precision_loss = false
host_youngs_modulus = 8E3
host_poissons_ratio = 0.25
base_name = mc
tensile_strength = mc_tensile_str_strong_harden
compressive_strength = mc_compressive_str
cohesion = mc_coh_strong_harden
friction_angle = mc_fric
dilation_angle = mc_dil
max_NR_iterations = 100000
smoothing_tol = 0.1 # MPa # Must be linked to cohesion
yield_function_tol = 1E-9 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0
[]
[wp]
type = CappedWeakPlaneCosseratStressUpdate
warn_about_precision_loss = false
base_name = wp
cohesion = wp_coh_harden
tan_friction_angle = wp_tan_fric
tan_dilation_angle = wp_tan_dil
tensile_strength = wp_tensile_str_harden
compressive_strength = wp_compressive_str_soften
max_NR_iterations = 10000
tip_smoother = 0.05
smoothing_tol = 0.05 # MPa # Note, this must be tied to cohesion, otherwise get no possible return at cone apex
yield_function_tol = 1E-11 # MPa. this is essentially the lowest possible without lots of precision loss
perfect_guess = true
min_step_size = 1.0E-3
[]
[undrained_density_0]
type = GenericConstantMaterial
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
prop_names = density
prop_values = 2500
[]
[undrained_density_1]
type = GenericFunctionMaterial
block = 1
prop_names = density
prop_values = density_sideways
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Postprocessors]
[min_roof_disp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = disp_z
[]
[min_roof_pp]
type = NodalExtremeValue
boundary = roof
value_type = min
variable = porepressure
[]
[min_surface_disp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = disp_z
[]
[min_surface_pp]
type = NodalExtremeValue
boundary = zmax
value_type = min
variable = porepressure
[]
[max_perm_zz]
type = ElementExtremeValue
block = '2 3 4 5 6 7 8 9 10 11 12 13 14 15 16'
variable = perm_zz
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason'
# best overall
# petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
# petsc_options_value = ' lu mumps'
# best if you do not have mumps:
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package'
petsc_options_value = ' lu superlu_dist'
# best if you do not have mumps or superlu_dist:
#petsc_options_iname = '-pc_type -pc_asm_overlap -sub_pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' asm 2 lu gmres 200'
# very basic:
#petsc_options_iname = '-pc_type -ksp_type -ksp_gmres_restart'
#petsc_options_value = ' bjacobi gmres 200'
line_search = bt
nl_abs_tol = 1e-3
nl_rel_tol = 1e-5
l_max_its = 200
nl_max_its = 30
start_time = 0.0
dt = 0.014706
end_time = 0.014706 #0.5
[]
[Outputs]
interval = 1
print_linear_residuals = true
exodus = true
csv = true
console = true
[]
(modules/porous_flow/test/tests/dirackernels/theis1.i)
# Theis problem: Flow to single sink
# SinglePhase
# Cartesian mesh with logarithmic distribution in x and y.
[Mesh]
type = GeneratedMesh
dim = 2
nx = 20
ny = 20
bias_x = 1.1
bias_y = 1.1
ymax = 100
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
compute_enthalpy = false
compute_internal_energy = false
[]
[Variables]
[pp]
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
viscosity = 0.001
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.2
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-14 0 0 0 1E-14 0 0 0 1E-14'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[Postprocessors]
[porepressure]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[total_mass]
type = PorousFlowFluidMass
execute_on = 'initial timestep_end'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 200
end_time = 1E3
nl_abs_tol = 1e-10
[]
[Outputs]
perf_graph = true
file_base = theis1
[csv]
type = CSV
execute_on = final
[]
[]
[ICs]
[PressureIC]
variable = pp
type = ConstantIC
value = 20e6
[]
[]
[DiracKernels]
[sink]
type = PorousFlowSquarePulsePointSource
end_time = 1000
point = '0 0 0'
mass_flux = -0.04
variable = pp
[]
[]
[BCs]
[right]
type = DirichletBC
variable = pp
value = 20e6
boundary = right
[]
[top]
type = DirichletBC
variable = pp
value = 20e6
boundary = top
[]
[]
[VectorPostprocessors]
[pressure]
type = SideValueSampler
variable = pp
sort_by = x
execute_on = timestep_end
boundary = bottom
[]
[]
(modules/porous_flow/test/tests/jacobian/fflux04.i)
# 2phase (PP), 3components (that exist in both phases), constant viscosity, constant insitu permeability
# density with constant bulk, Corey relative perm, nonzero gravity, unsaturated with vanGenuchten
[Mesh]
type = GeneratedMesh
dim = 2
nx = 2
xmin = 0
xmax = 1
ny = 1
ymin = 0
ymax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[]
[AuxVariables]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[]
[ICs]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 0.4
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 0.4
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 0.4
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 0.4
[]
[]
[Kernels]
[flux0]
type = PorousFlowAdvectiveFlux
fluid_component = 0
variable = ppwater
gravity = '-1 -0.1 0'
[]
[flux1]
type = PorousFlowAdvectiveFlux
fluid_component = 1
variable = ppgas
gravity = '-1 -0.1 0'
[]
[flux2]
type = PorousFlowAdvectiveFlux
fluid_component = 2
variable = massfrac_ph0_sp0
gravity = '-1 -0.1 0'
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'ppwater ppgas massfrac_ph0_sp0'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[]
[Preconditioning]
active = check
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000'
[]
[check]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
exodus = false
[]
(modules/porous_flow/test/tests/pressure_pulse/pressure_pulse_1d.i)
# Pressure pulse in 1D with 1 phase - transient
[Mesh]
type = GeneratedMesh
dim = 1
nx = 10
xmin = 0
xmax = 100
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[pp]
initial_condition = 2E6
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[flux]
type = PorousFlowAdvectiveFlux
variable = pp
gravity = '0 0 0'
fluid_component = 0
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1e-7
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
density0 = 1000
thermal_expansion = 0
viscosity = 1e-3
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-15 0 0 0 1E-15 0 0 0 1E-15'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 0
phase = 0
[]
[]
[BCs]
[left]
type = DirichletBC
boundary = left
value = 3E6
variable = pp
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-20 10000'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E3
end_time = 1E4
[]
[Postprocessors]
[p000]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = 'initial timestep_end'
[]
[p010]
type = PointValue
variable = pp
point = '10 0 0'
execute_on = 'initial timestep_end'
[]
[p020]
type = PointValue
variable = pp
point = '20 0 0'
execute_on = 'initial timestep_end'
[]
[p030]
type = PointValue
variable = pp
point = '30 0 0'
execute_on = 'initial timestep_end'
[]
[p040]
type = PointValue
variable = pp
point = '40 0 0'
execute_on = 'initial timestep_end'
[]
[p050]
type = PointValue
variable = pp
point = '50 0 0'
execute_on = 'initial timestep_end'
[]
[p060]
type = PointValue
variable = pp
point = '60 0 0'
execute_on = 'initial timestep_end'
[]
[p070]
type = PointValue
variable = pp
point = '70 0 0'
execute_on = 'initial timestep_end'
[]
[p080]
type = PointValue
variable = pp
point = '80 0 0'
execute_on = 'initial timestep_end'
[]
[p090]
type = PointValue
variable = pp
point = '90 0 0'
execute_on = 'initial timestep_end'
[]
[p100]
type = PointValue
variable = pp
point = '100 0 0'
execute_on = 'initial timestep_end'
[]
[]
[Outputs]
file_base = pressure_pulse_1d
print_linear_residuals = false
csv = true
[]
(modules/porous_flow/test/tests/dirackernels/bh04.i)
# fully-saturated
# production
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Functions]
[dts]
type = PiecewiseLinear
y = '1E-2 1E-1 1 1E1 1E2 1E3'
x = '0 1E-1 1 1E1 1E2 1E3'
[]
[]
[Variables]
[pp]
initial_condition = 0
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = pp
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp'
number_fluid_phases = 1
number_fluid_components = 1
[]
[borehole_total_outflow_mass]
type = PorousFlowSumQuantity
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.8
alpha = 1e-5
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 2e9
viscosity = 1e-3
density0 = 1000
thermal_expansion = 0
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1E-12 0 0 0 1E-12 0 0 0 1E-12'
[]
[relperm]
type = PorousFlowRelativePermeabilityFLAC
m = 2
phase = 0
[]
[]
[DiracKernels]
[bh]
type = PorousFlowPeacemanBorehole
variable = pp
SumQuantityUO = borehole_total_outflow_mass
point_file = bh02.bh
fluid_phase = 0
bottom_p_or_t = -1E6
unit_weight = '0 0 0'
use_mobility = true
character = 1
[]
[]
[Postprocessors]
[bh_report]
type = PorousFlowPlotQuantity
uo = borehole_total_outflow_mass
[]
[fluid_mass0]
type = PorousFlowFluidMass
execute_on = timestep_begin
[]
[fluid_mass1]
type = PorousFlowFluidMass
execute_on = timestep_end
[]
[zmass_error]
type = FunctionValuePostprocessor
function = mass_bal_fcn
execute_on = timestep_end
[]
[p0]
type = PointValue
variable = pp
point = '0 0 0'
execute_on = timestep_end
[]
[]
[Functions]
[mass_bal_fcn]
type = ParsedFunction
value = abs((a-c+d)/2/(a+c))
vars = 'a c d'
vals = 'fluid_mass1 fluid_mass0 bh_report'
[]
[]
[Preconditioning]
[usual]
type = SMP
full = true
petsc_options = '-snes_converged_reason'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -ksp_max_it'
petsc_options_value = 'bcgs bjacobi 1E-10 1E-10 10000 30'
[]
[]
[Executioner]
type = Transient
end_time = 1E3
solve_type = NEWTON
[TimeStepper]
type = FunctionDT
function = dts
[]
[]
[Outputs]
file_base = bh04
exodus = false
csv = true
execute_on = timestep_end
[]
(modules/porous_flow/test/tests/jacobian/heat_vol_exp01.i)
# Tests the PorousFlowHeatVolumetricExpansion kernel
# Fluid with constant bulk modulus, van-Genuchten capillary, THM porosity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
block = 0
PorousFlowDictator = dictator
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[disp_z]
[]
[porepressure]
[]
[temperature]
[]
[]
[ICs]
[disp_x]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_x
[]
[disp_y]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_y
[]
[disp_z]
type = RandomIC
min = -0.1
max = 0.1
variable = disp_z
[]
[p]
type = RandomIC
min = -1
max = 0
variable = porepressure
[]
[t]
type = RandomIC
min = 1
max = 2
variable = temperature
[]
[]
[BCs]
# necessary otherwise volumetric strain rate will be zero
[disp_x]
type = DirichletBC
variable = disp_x
value = 0
boundary = 'left right'
[]
[disp_y]
type = DirichletBC
variable = disp_y
value = 0
boundary = 'left right'
[]
[disp_z]
type = DirichletBC
variable = disp_z
value = 0
boundary = 'left right'
[]
[]
[Kernels]
[grad_stress_x]
type = StressDivergenceTensors
variable = disp_x
displacements = 'disp_x disp_y disp_z'
component = 0
[]
[grad_stress_y]
type = StressDivergenceTensors
variable = disp_y
displacements = 'disp_x disp_y disp_z'
component = 1
[]
[grad_stress_z]
type = StressDivergenceTensors
variable = disp_z
displacements = 'disp_x disp_y disp_z'
component = 2
[]
[dummy]
type = TimeDerivative
variable = porepressure
[]
[temp]
type = PorousFlowHeatVolumetricExpansion
variable = temperature
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'porepressure temperature disp_x disp_y disp_z'
number_fluid_phases = 1
number_fluid_components = 1
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
cv = 1.3
[]
[]
[]
[Materials]
[p_eff]
type = PorousFlowEffectiveFluidPressure
[]
[temperature]
type = PorousFlowTemperature
temperature = temperature
[]
[elasticity_tensor]
type = ComputeElasticityTensor
C_ijkl = '2 3'
fill_method = symmetric_isotropic
[]
[strain]
type = ComputeSmallStrain
[]
[stress]
type = ComputeLinearElasticStress
[]
[vol_strain]
type = PorousFlowVolumetricStrain
[]
[ppss_nodal]
type = PorousFlow1PhaseP
porepressure = porepressure
capillary_pressure = pc
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosity
fluid = true
mechanical = true
thermal = true
porosity_zero = 0.1
biot_coefficient = 0.5
solid_bulk = 1
thermal_expansion_coeff = 0.1
reference_temperature = 0.1
reference_porepressure = 0.2
[]
[rock_heat]
type = PorousFlowMatrixInternalEnergy
specific_heat_capacity = 1.1
density = 0.5
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-5
[]
[Outputs]
execute_on = 'timestep_end'
file_base = jacobian2
exodus = false
[]
(modules/porous_flow/test/tests/jacobian/line_sink01.i)
# PorousFlowPeacemanBorehole with 2-phase, 3-components, with enthalpy, internal_energy, and thermal_conductivity
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1
xmax = 1
ymin = -1
ymax = 1
zmin = -1
zmax = 1
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[Variables]
[ppwater]
[]
[ppgas]
[]
[massfrac_ph0_sp0]
[]
[massfrac_ph0_sp1]
[]
[massfrac_ph1_sp0]
[]
[massfrac_ph1_sp1]
[]
[temp]
[]
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'temp ppwater ppgas massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
number_fluid_phases = 2
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1
[]
[dummy_outflow0]
type = PorousFlowSumQuantity
[]
[dummy_outflow1]
type = PorousFlowSumQuantity
[]
[dummy_outflow2]
type = PorousFlowSumQuantity
[]
[dummy_outflow3]
type = PorousFlowSumQuantity
[]
[dummy_outflow4]
type = PorousFlowSumQuantity
[]
[dummy_outflow5]
type = PorousFlowSumQuantity
[]
[dummy_outflow6]
type = PorousFlowSumQuantity
[]
[dummy_outflow7]
type = PorousFlowSumQuantity
[]
[]
[ICs]
[temp]
type = RandomIC
variable = temp
min = 1
max = 2
[]
[ppwater]
type = RandomIC
variable = ppwater
min = -1
max = 0
[]
[ppgas]
type = RandomIC
variable = ppgas
min = 0
max = 1
[]
[massfrac_ph0_sp0]
type = RandomIC
variable = massfrac_ph0_sp0
min = 0
max = 1
[]
[massfrac_ph0_sp1]
type = RandomIC
variable = massfrac_ph0_sp1
min = 0
max = 1
[]
[massfrac_ph1_sp0]
type = RandomIC
variable = massfrac_ph1_sp0
min = 0
max = 1
[]
[massfrac_ph1_sp1]
type = RandomIC
variable = massfrac_ph1_sp1
min = 0
max = 1
[]
[]
[Kernels]
[dummy_temp]
type = TimeDerivative
variable = temp
[]
[dummy_ppwater]
type = TimeDerivative
variable = ppwater
[]
[dummy_ppgas]
type = TimeDerivative
variable = ppgas
[]
[dummy_m00]
type = TimeDerivative
variable = massfrac_ph0_sp0
[]
[dummy_m01]
type = TimeDerivative
variable = massfrac_ph0_sp1
[]
[dummy_m10]
type = TimeDerivative
variable = massfrac_ph1_sp0
[]
[dummy_m11]
type = TimeDerivative
variable = massfrac_ph1_sp1
[]
[]
[Modules]
[FluidProperties]
[simple_fluid0]
type = SimpleFluidProperties
bulk_modulus = 1.5
density0 = 1
thermal_expansion = 0
viscosity = 1
cv = 1.1
[]
[simple_fluid1]
type = SimpleFluidProperties
bulk_modulus = 0.5
density0 = 0.5
thermal_expansion = 0
viscosity = 1.4
cv = 1.8
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
temperature = temp
[]
[ppss]
type = PorousFlow2PhasePP
phase0_porepressure = ppwater
phase1_porepressure = ppgas
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'massfrac_ph0_sp0 massfrac_ph0_sp1 massfrac_ph1_sp0 massfrac_ph1_sp1'
[]
[simple_fluid0]
type = PorousFlowSingleComponentFluid
fp = simple_fluid0
phase = 0
[]
[simple_fluid1]
type = PorousFlowSingleComponentFluid
fp = simple_fluid1
phase = 1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '1 0 0 0 2 0 0 0 3'
[]
[relperm0]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[relperm1]
type = PorousFlowRelativePermeabilityCorey
n = 3
phase = 1
[]
[thermal_conductivity]
type = PorousFlowThermalConductivityIdeal
dry_thermal_conductivity = '0.1 0.02 0.03 0.02 0.0 0.01 0.03 0.01 0.3'
[]
[]
[DiracKernels]
[dirac0]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
line_length = 1
SumQuantityUO = dummy_outflow0
character = 1
bottom_p_or_t = -10
unit_weight = '1 2 3'
re_constant = 0.123
[]
[dirac1]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = ppgas
line_length = 1
line_direction = '-1 -1 -1'
use_relative_permeability = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow1
character = -0.5
bottom_p_or_t = 10
unit_weight = '1 2 -3'
re_constant = 0.3
[]
[dirac2]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp0
line_length = 1.3
line_direction = '1 0 1'
use_mobility = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow2
character = 0.6
bottom_p_or_t = -4
unit_weight = '-1 -2 -3'
re_constant = 0.4
[]
[dirac3]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = massfrac_ph0_sp1
line_length = 1.3
line_direction = '1 1 1'
use_enthalpy = true
mass_fraction_component = 0
point_file = one_point.bh
SumQuantityUO = dummy_outflow3
character = -1
bottom_p_or_t = 3
unit_weight = '0.1 0.2 0.3'
re_constant = 0.5
[]
[dirac4]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph1_sp0
function_of = temperature
line_length = 0.9
line_direction = '1 1 1'
mass_fraction_component = 1
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow4
character = 1.1
bottom_p_or_t = -7
unit_weight = '-1 2 3'
re_constant = 0.6
[]
[dirac5]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = temp
line_length = 0.9
function_of = temperature
line_direction = '1 2 3'
mass_fraction_component = 2
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow5
character = 0.9
bottom_p_or_t = -8
unit_weight = '1 2 1'
re_constant = 0.7
[]
[dirac6]
type = PorousFlowPeacemanBorehole
fluid_phase = 0
variable = ppwater
point_file = one_point.bh
SumQuantityUO = dummy_outflow6
character = 0
bottom_p_or_t = 10
unit_weight = '0.0 0.0 0.0'
[]
[dirac7]
type = PorousFlowPeacemanBorehole
fluid_phase = 1
variable = massfrac_ph0_sp0
use_mobility = true
mass_fraction_component = 1
use_relative_permeability = true
use_internal_energy = true
point_file = one_point.bh
SumQuantityUO = dummy_outflow7
character = -1
bottom_p_or_t = 10
unit_weight = '0.1 0.2 0.3'
[]
[]
[Preconditioning]
[check]
type = SMP
full = true
#petsc_options = '-snes_test_display'
petsc_options_iname = '-ksp_type -pc_type -snes_atol -snes_rtol -snes_max_it -snes_type'
petsc_options_value = 'bcgs bjacobi 1E-15 1E-10 10000 test'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1
end_time = 1
[]
[Outputs]
file_base = line_sink01
[]
(modules/porous_flow/test/tests/sinks/s07.i)
# apply a sink flux on just one component of a 3-component system and observe the correct behavior
[Mesh]
type = GeneratedMesh
dim = 3
nx = 1
ny = 1
nz = 1
xmin = 0
xmax = 1
ymin = 0
ymax = 1
zmin = 0
zmax = 2
[]
[GlobalParams]
PorousFlowDictator = dictator
[]
[UserObjects]
[dictator]
type = PorousFlowDictator
porous_flow_vars = 'pp frac0 frac1'
number_fluid_phases = 1
number_fluid_components = 3
[]
[pc]
type = PorousFlowCapillaryPressureVG
m = 0.5
alpha = 1.1
[]
[]
[Variables]
[pp]
[]
[frac0]
initial_condition = 0.1
[]
[frac1]
initial_condition = 0.6
[]
[]
[ICs]
[pp]
type = FunctionIC
variable = pp
function = y
[]
[]
[Kernels]
[mass0]
type = PorousFlowMassTimeDerivative
fluid_component = 0
variable = frac0
[]
[mass1]
type = PorousFlowMassTimeDerivative
fluid_component = 1
variable = frac1
[]
[mass2]
type = PorousFlowMassTimeDerivative
fluid_component = 2
variable = pp
[]
[]
[Modules]
[FluidProperties]
[simple_fluid]
type = SimpleFluidProperties
bulk_modulus = 1.3
density0 = 1.1
thermal_expansion = 0
viscosity = 1.1
[]
[]
[]
[Materials]
[temperature]
type = PorousFlowTemperature
[]
[ppss]
type = PorousFlow1PhaseP
porepressure = pp
capillary_pressure = pc
[]
[massfrac]
type = PorousFlowMassFraction
mass_fraction_vars = 'frac0 frac1'
[]
[simple_fluid]
type = PorousFlowSingleComponentFluid
fp = simple_fluid
phase = 0
[]
[porosity]
type = PorousFlowPorosityConst
porosity = 0.1
[]
[permeability]
type = PorousFlowPermeabilityConst
permeability = '0.2 0 0 0 0.1 0 0 0 0.1'
[]
[relperm]
type = PorousFlowRelativePermeabilityCorey
n = 2
phase = 0
[]
[]
[AuxVariables]
[flux_out]
[]
[]
[Functions]
[mass1_00]
type = ParsedFunction
value = 'frac*vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
vars = 'frac vol por dens0 pp bulk al m'
vals = 'f1_00 0.25 0.1 1.1 p00 1.3 1.1 0.5'
[]
[expected_mass_change1_00]
type = ParsedFunction
value = 'frac*fcn*area*dt'
vars = 'frac fcn area dt'
vals = 'f1_00 6 0.5 1E-3'
[]
[mass1_00_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm1_00_prev del_m1_00'
[]
[mass1_01]
type = ParsedFunction
value = 'frac*vol*por*dens0*exp(pp/bulk)*pow(1+pow(-al*pp,1.0/(1-m)),-m)'
vars = 'frac vol por dens0 pp bulk al m'
vals = 'f1_01 0.25 0.1 1.1 p01 1.3 1.1 0.5'
[]
[expected_mass_change1_01]
type = ParsedFunction
value = 'frac*fcn*area*dt'
vars = 'frac fcn area dt'
vals = 'f1_01 6 0.5 1E-3'
[]
[mass1_01_expect]
type = ParsedFunction
value = 'mass_prev-mass_change'
vars = 'mass_prev mass_change'
vals = 'm1_01_prev del_m1_01'
[]
[]
[Postprocessors]
[f1_00]
type = PointValue
point = '0 0 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_00]
type = PointValue
point = '0 0 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p00]
type = PointValue
point = '0 0 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m1_00]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'initial timestep_end'
[]
[m1_00_prev]
type = FunctionValuePostprocessor
function = mass1_00
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m1_00]
type = FunctionValuePostprocessor
function = expected_mass_change1_00
execute_on = 'timestep_end'
outputs = 'console'
[]
[m1_00_expect]
type = FunctionValuePostprocessor
function = mass1_00_expect
execute_on = 'timestep_end'
[]
[f1_01]
type = PointValue
point = '0 1 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_01]
type = PointValue
point = '0 1 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p01]
type = PointValue
point = '0 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[m1_01]
type = FunctionValuePostprocessor
function = mass1_01
execute_on = 'initial timestep_end'
[]
[m1_01_prev]
type = FunctionValuePostprocessor
function = mass1_01
execute_on = 'timestep_begin'
outputs = 'console'
[]
[del_m1_01]
type = FunctionValuePostprocessor
function = expected_mass_change1_01
execute_on = 'timestep_end'
outputs = 'console'
[]
[m1_01_expect]
type = FunctionValuePostprocessor
function = mass1_01_expect
execute_on = 'timestep_end'
[]
[f1_11]
type = PointValue
point = '1 1 0'
variable = frac1
execute_on = 'initial timestep_end'
[]
[flux_11]
type = PointValue
point = '1 1 0'
variable = flux_out
execute_on = 'initial timestep_end'
[]
[p11]
type = PointValue
point = '1 1 0'
variable = pp
execute_on = 'initial timestep_end'
[]
[]
[BCs]
[flux]
type = PorousFlowSink
boundary = 'left'
variable = frac1
use_mobility = false
use_relperm = false
mass_fraction_component = 1
fluid_phase = 0
flux_function = 6
save_in = flux_out
[]
[]
[Preconditioning]
[andy]
type = SMP
full = true
petsc_options_iname = '-ksp_type -pc_type -sub_pc_type -snes_max_it -sub_pc_factor_shift_type -pc_asm_overlap'
petsc_options_value = 'gmres asm lu 10 NONZERO 2'
[]
[]
[Executioner]
type = Transient
solve_type = Newton
dt = 1E-3
end_time = 0.01
nl_rel_tol = 1E-12
nl_abs_tol = 1E-12
[]
[Outputs]
file_base = s07
[console]
type = Console
execute_on = 'nonlinear linear'
[]
[csv]
type = CSV
execute_on = 'timestep_end'
[]
[]