BlackBear Failure Analysis Report

Introduction

The Software Requirement Specification (SRS) for BlackBear describes the system functional and non-functional requirements that describe the expected interactions that the software shall provide.

Dependencies

The BlackBear application is developed using MOOSE and is based on various modules, as such the SRS for BlackBear is dependent upon the following documents.

Failure Analysis Requirements

The following is a complete list for all the requirements related to failure analysis for BlackBear.

blackbear: Concrete Expansion Microcracking
9.5.2The ConcreteExpansionMicrocrackingDamage model shall generate an error if used with a material that is not guaranteed isotropic
Specification(s): concrete_microcracking_damage_isotropic_error
Design: Concrete Expansion Microcracking Damage
Issue(s): #43
Collection(s): FAILURE_ANALYSISFUNCTIONAL
Type(s): RunException
2

blackbear: Mazars Damage
9.8.2The MazarsDamage model shall generate an error if used with a material that is not guaranteed isotropic
Specification(s): mazars_damage_isotropic_error
Design: Mazars Damage
Issue(s): #24
Collection(s): FAILURE_ANALYSISFUNCTIONAL
Type(s): RunException
2


[concrete_microcracking_damage_isotropic_error]
  type = 'RunException'
  input = 'concrete_expansion_microcracking.i'
  expect_err = 'ConcreteExpansionMicrocrackingDamage requires that the elasticity tensor be guaranteed isotropic'
  cli_args = 'Materials/inactive=concrete Materials/aniso/type=ComputeElasticityTensor Materials/aniso/fill_methode=orthotropic Materials/aniso/C_ijkl="1 1 1 1 1 1 1 1 1"'
  allow_test_objects = True
  requirement = 'The ConcreteExpansionMicrocrackingDamage model shall generate an error if used with a material that is not guaranteed isotropic'
[]


[mazars_damage_isotropic_error]
  type = 'RunException'
  input = 'mazars.i'
  expect_err = 'MazarsDamage requires that the elasticity tensor be guaranteed isotropic'
  cli_args = 'Materials/inactive=elasticity Materials/aniso/type=ComputeElasticityTensor Materials/aniso/fill_methode=orthotropic Materials/aniso/C_ijkl="1 1 1 1 1 1 1 1 1"'
  requirement = 'The MazarsDamage model shall generate an error if used with a material that is not guaranteed isotropic'
[]

Introduction
Dependencies
Failure Analysis Requirements