- componentThe force component constraint that this object is supplying
C++ Type:MooseEnum
Controllable:No
Description:The force component constraint that this object is supplying
- primary_boundaryThe name of the primary boundary sideset.
C++ Type:BoundaryName
Controllable:No
Description:The name of the primary boundary sideset.
- primary_subdomainThe name of the primary subdomain.
C++ Type:SubdomainName
Controllable:No
Description:The name of the primary subdomain.
- secondary_boundaryThe name of the secondary boundary sideset.
C++ Type:BoundaryName
Controllable:No
Description:The name of the secondary boundary sideset.
- secondary_subdomainThe name of the secondary subdomain.
C++ Type:SubdomainName
Controllable:No
Description:The name of the secondary subdomain.
- weighted_gap_uoThe weighted gap user object.
C++ Type:UserObjectName
Controllable:No
Description:The weighted gap user object.
NormalMortarMechanicalContact
The NormalMortarMechanicalContact
class is used to apply normal contact forces to the displacement residuals. The contact pressure variable (a Lagrange multiplier) is specified using the variable
parameter. The displacement variable must be specified either using the secondary_variable
or primary_variable
parameter. You must create as many NormalMortarMechanicalContact
classes as dimensions in your simulation, e.g. for a two dimensional simulation there must be NormalMortarMechanicalContact
instances for both x and y displacement components.
This class is used to apply normal contact forces using lagrange multipliers
Input Parameters
- aux_lmAuxiliary Lagrange multiplier variable that is utilized together with the Petrov-Galerkin approach.
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:Auxiliary Lagrange multiplier variable that is utilized together with the Petrov-Galerkin approach.
- compute_lm_residualFalse
Default:False
C++ Type:bool
Controllable:No
- compute_lm_residualsTrueWhether to compute Lagrange Multiplier residuals
Default:True
C++ Type:bool
Controllable:No
Description:Whether to compute Lagrange Multiplier residuals
- compute_primal_residualsTrueWhether to compute residuals for the primal variable.
Default:True
C++ Type:bool
Controllable:No
Description:Whether to compute residuals for the primal variable.
- correct_edge_droppingFalseWhether to enable correct edge dropping treatment for mortar constraints. When disabled any Lagrange Multiplier degree of freedom on a secondary element without full primary contributions will be set (strongly) to 0.
Default:False
C++ Type:bool
Controllable:No
Description:Whether to enable correct edge dropping treatment for mortar constraints. When disabled any Lagrange Multiplier degree of freedom on a secondary element without full primary contributions will be set (strongly) to 0.
- debug_meshFalseWhether this constraint is going to enable mortar segment mesh debug information. An exodusfile will be generated if the user sets this flag to true
Default:False
C++ Type:bool
Controllable:No
Description:Whether this constraint is going to enable mortar segment mesh debug information. An exodusfile will be generated if the user sets this flag to true
- derivative_threshold1e-17Threshold to discard automatic differentiation derivatives. This number is chosen on the order of the machine epsilon based on current experience.
Default:1e-17
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Threshold to discard automatic differentiation derivatives. This number is chosen on the order of the machine epsilon based on current experience.
- ghost_higher_d_neighborsFalseWhether we should ghost higher-dimensional neighbors. This is necessary when we are doing second order mortar with finite volume primal variables, because in order for the method to be second order we must use cell gradients, which couples in the neighbor cells.
Default:False
C++ Type:bool
Controllable:No
Description:Whether we should ghost higher-dimensional neighbors. This is necessary when we are doing second order mortar with finite volume primal variables, because in order for the method to be second order we must use cell gradients, which couples in the neighbor cells.
- ghost_point_neighborsFalseWhether we should ghost point neighbors of secondary face elements, and consequently also their mortar interface couples.
Default:False
C++ Type:bool
Controllable:No
Description:Whether we should ghost point neighbors of secondary face elements, and consequently also their mortar interface couples.
- interpolate_normalsFalseWhether to interpolate the nodal normals (e.g. classic idea of evaluating field at quadrature points). If this is set to false, then non-interpolated nodal normals will be used, and then the _normals member should be indexed with _i instead of _qp
Default:False
C++ Type:bool
Controllable:No
Description:Whether to interpolate the nodal normals (e.g. classic idea of evaluating field at quadrature points). If this is set to false, then non-interpolated nodal normals will be used, and then the _normals member should be indexed with _i instead of _qp
- matrix_onlyFalseWhether this object is only doing assembly to matrices (no vectors)
Default:False
C++ Type:bool
Controllable:No
Description:Whether this object is only doing assembly to matrices (no vectors)
- minimum_projection_angle40Parameter to control which angle (in degrees) is admissible for the creation of mortar segments. If set to a value close to zero, very oblique projections are allowed, which can result in mortar segments solving physics not meaningfully, and overprojection of primary nodes onto the mortar segment mesh in extreme cases. This parameter is mostly intended for mortar mesh debugging purposes in two dimensions.
Default:40
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Parameter to control which angle (in degrees) is admissible for the creation of mortar segments. If set to a value close to zero, very oblique projections are allowed, which can result in mortar segments solving physics not meaningfully, and overprojection of primary nodes onto the mortar segment mesh in extreme cases. This parameter is mostly intended for mortar mesh debugging purposes in two dimensions.
- periodicFalseWhether this constraint is going to be used to enforce a periodic condition. This has the effect of changing the normals vector for projection from outward to inward facing
Default:False
C++ Type:bool
Controllable:No
Description:Whether this constraint is going to be used to enforce a periodic condition. This has the effect of changing the normals vector for projection from outward to inward facing
- primary_variablePrimal variable on primary surface. If this parameter is not provided then the primary variable will be initialized to the secondary variable
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:Primal variable on primary surface. If this parameter is not provided then the primary variable will be initialized to the secondary variable
- quadratureDEFAULTQuadrature rule to use on mortar segments. For 2D mortar DEFAULT is recommended. For 3D mortar, QUAD meshes are integrated using triangle mortar segments. While DEFAULT quadrature order is typically sufficiently accurate, exact integration of QUAD mortar faces requires SECOND order quadrature for FIRST variables and FOURTH order quadrature for SECOND order variables.
Default:DEFAULT
C++ Type:MooseEnum
Options:DEFAULT, FIRST, SECOND, THIRD, FOURTH
Controllable:No
Description:Quadrature rule to use on mortar segments. For 2D mortar DEFAULT is recommended. For 3D mortar, QUAD meshes are integrated using triangle mortar segments. While DEFAULT quadrature order is typically sufficiently accurate, exact integration of QUAD mortar faces requires SECOND order quadrature for FIRST variables and FOURTH order quadrature for SECOND order variables.
- secondary_variablePrimal variable on secondary surface.
C++ Type:VariableName
Unit:(no unit assumed)
Controllable:No
Description:Primal variable on secondary surface.
- use_petrov_galerkinFalseWhether to use the Petrov-Galerkin approach for the mortar-based constraints. If set to true, we use the standard basis as the test function and dual basis as the shape function for the interpolation of the Lagrange multiplier variable.
Default:False
C++ Type:bool
Controllable:No
Description:Whether to use the Petrov-Galerkin approach for the mortar-based constraints. If set to true, we use the standard basis as the test function and dual basis as the shape function for the interpolation of the Lagrange multiplier variable.
- variableThe name of the lagrange multiplier variable that this constraint is applied to. This parameter may not be supplied in the case of using penalty methods for example
C++ Type:NonlinearVariableName
Unit:(no unit assumed)
Controllable:No
Description:The name of the lagrange multiplier variable that this constraint is applied to. This parameter may not be supplied in the case of using penalty methods for example
Optional Parameters
- absolute_value_vector_tagsThe tags for the vectors this residual object should fill with the absolute value of the residual contribution
C++ Type:std::vector<TagName>
Controllable:No
Description:The tags for the vectors this residual object should fill with the absolute value of the residual contribution
- extra_matrix_tagsThe extra tags for the matrices this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the matrices this Kernel should fill
- extra_vector_tagsThe extra tags for the vectors this Kernel should fill
C++ Type:std::vector<TagName>
Controllable:No
Description:The extra tags for the vectors this Kernel should fill
- matrix_tagssystemThe tag for the matrices this Kernel should fill
Default:system
C++ Type:MultiMooseEnum
Options:nontime, system
Controllable:No
Description:The tag for the matrices this Kernel should fill
- vector_tagsnontimeThe tag for the vectors this Kernel should fill
Default:nontime
C++ Type:MultiMooseEnum
Options:nontime, time
Controllable:No
Description:The tag for the vectors this Kernel should fill
Contribution To Tagged Field Data Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
- seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Material Property Retrieval Parameters
Input Files
- (modules/combined/test/tests/stateful_mortar_constraints/stateful_mortar_npr.i)
- (modules/contact/test/tests/mortar_dynamics/block-dynamics.i)
- (modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-vel.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_adaptivity.i)
- (modules/contact/test/tests/bouncing-block-contact/frictional-nodal-min-normal-lm-mortar-pdass-tangential-lm-mortar-disp.i)
- (modules/contact/test/tests/bouncing-block-contact/variational-frictional.i)
- (modules/contact/test/tests/3d-mortar-contact/half_sphere_nodal_geometry.i)
- (modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d-dynamics-light-function.i)
- (modules/contact/test/tests/pdass_problems/ironing_penalty_al.i)
- (modules/combined/test/tests/nodal_patch_recovery/npr_with_lower_domains.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-penalty.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/small-2d-rz/small.i)
- (modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d-penalty.i)
- (modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_3d.i)
- (modules/contact/test/tests/pdass_problems/ironing.i)
- (modules/contact/test/tests/cohesive_zone_model/mortar_czm.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_test_nochange.i)
- (modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-fretting-wear-test-projection_angle.i)
- (modules/contact/test/tests/pdass_problems/ironing_penalty.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d-rz/finite.i)
- (modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-fretting-wear-test.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d.i)
- (modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d-dynamics-light.i)
- (modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-wear.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_tight_slip.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_backup.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d_pg.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-function.i)
- (modules/contact/test/tests/mortar_dynamics/block-dynamics-friction.i)
- (modules/contact/test/tests/bouncing-block-contact/frictional-mortar-min-lm-mortar-disp.i)
- (modules/contact/test/tests/bouncing-block-contact/mixed-weighted-gap-swapped.i)
- (modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d.i)
- (modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-wear-vel.i)
- (modules/contact/test/tests/bouncing-block-contact/frictional-penalty-weighted-vel.i)
- (modules/contact/test/tests/sliding_block/edge_dropping/two_equal_blocks_slide_3d.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/finite.i)
- (modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-al.i)
- (modules/contact/test/tests/mortar_dynamics/block-dynamics-friction-creep.i)
- (modules/contact/test/tests/bouncing-block-contact/frictionless-penalty-weighted-gap.i)
- (modules/contact/test/tests/sliding_block/edge_dropping/two_equal_blocks_slide_2d.i)
- (modules/contact/test/tests/pdass_problems/frictional_bouncing_block.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/finite_rr.i)
- (modules/contact/test/tests/bouncing-block-contact/frictionless-weighted-gap.i)
- (modules/contact/test/tests/mortar_dynamics/block-dynamics-reference.i)
- (modules/contact/test/tests/cohesive_zone_model/mortar_czm_analysis.i)
- (modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d-test-derivative-trimming.i)
- (modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d.i)
- (modules/contact/test/tests/cohesive_zone_model/bilinear_mixed_mortar_only_czm.i)
- (modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d_pg.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction.i)
- (modules/contact/test/tests/bouncing-block-contact/frictionless-weighted-gap-mixed-basis.i)
- (modules/contact/test/tests/mortar_aux_kernels/frictional-mortar-3d-status.i)
- (modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_2d.i)
- (modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al.i)
- (modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d-dynamics.i)
- (modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_2d_pg.i)
- (modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/small.i)
- (modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_3d_pg.i)
(modules/combined/test/tests/stateful_mortar_constraints/stateful_mortar_npr.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
[Mesh]
patch_size = 80
patch_update_strategy = auto
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = '${fparse 2.0 / (E_plank + E_block)}'
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = '${fparse 2.0 / (E_plank + E_block)}'
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[AuxVariables]
[stress_xx]
order = FIRST
family = MONOMIAL
block = 'plank block'
[]
[stress_yy]
order = FIRST
family = MONOMIAL
block = 'plank block'
[]
[stress_xx_recovered]
order = FIRST
family = LAGRANGE
block = 'plank block'
[]
[stress_yy_recovered]
order = FIRST
family = LAGRANGE
block = 'plank block'
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = 'timestep_end'
block = 'plank block'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = 'timestep_end'
block = 'plank block'
[]
[stress_xx_recovered]
type = NodalPatchRecoveryAux
variable = stress_xx_recovered
nodal_patch_recovery_uo = stress_xx_patch
execute_on = 'TIMESTEP_END'
block = 'plank block'
[]
[stress_yy_recovered]
type = NodalPatchRecoveryAux
variable = stress_yy_recovered
nodal_patch_recovery_uo = stress_yy_patch
execute_on = 'TIMESTEP_END'
block = 'plank block'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = false
strain = FINITE
[]
[]
[Kernels]
[hc]
type = HeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[stress_xx_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '0 0'
execute_on = 'NONLINEAR TIMESTEP_END'
block = 'plank block'
[]
[stress_yy_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '1 1'
execute_on = 'NONLINEAR TIMESTEP_END'
block = 'plank block'
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceStatefulConstraint
variable = thermal_lm
secondary_variable = temp
k = 0.0001
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
stateful_variable = stress_xx_recovered
[]
[]
[BCs]
[left_temp]
type = DirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = DirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
preset = false
[]
[right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
preset = false
[]
[]
[Materials]
[plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[]
[heat_plank]
type = HeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = HeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 0.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
[]
[Postprocessors]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[stress_xx_recovered]
type = ElementExtremeValue
variable = stress_xx_recovered
block = 'block'
value_type = max
[]
[stress_yy_recovered]
type = ElementExtremeValue
variable = stress_yy_recovered
block = 'block'
value_type = max
[]
[min_temperature]
type = ElementExtremeValue
variable = temp
block = 'plank'
value_type = min
[]
[]
[Outputs]
exodus = true
[out]
type = CSV
[]
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/mortar_dynamics/block-dynamics.i)
starting_point = 2e-1
offset = -0.19
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 1.0
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[]
[AuxKernels]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'LINEAR timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'LINEAR timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'LINEAR timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'LINEAR timestep_end'
[]
[]
# User object provides the contact force (e.g. LM)
# for the application of the generalized force
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicWeightedGapLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1e4
capture_tolerance = 1.0e-5
newmark_beta = 0.25
newmark_gamma = 0.5
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 75
dt = 0.05
dtmin = .05
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err '
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = false
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-vel.i)
starting_point = 2e-1
offset = -0.19
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 1.0
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[gap_vel]
block = '3'
[]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[]
[AuxKernels]
[gap_vel]
type = WeightedGapVelAux
variable = gap_vel
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
disp_x = disp_x
disp_y = disp_y
correct_edge_dropping = true
execute_on = 'TIMESTEP_END'
[]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicWeightedGapLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1e4
capture_tolerance = 1.0e-5
newmark_beta = 0.25
newmark_gamma = 0.5
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 0.1
dt = 0.05
dtmin = 0.05
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err '
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = false
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_coarser.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[react_x]
[]
[react_y]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = PenaltyMortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[penalty_weighted_gap_auxk]
type = PenaltyMortarUserObjectAux
variable = weighted_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[react_x]
type = TagVectorAux
vector_tag = 'ref'
v = 'disp_x'
variable = 'react_x'
[]
[react_y]
type = TagVectorAux
vector_tag = 'ref'
v = 'disp_y'
variable = 'react_y'
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = react_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = react_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = react_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = react_y
boundary = 4
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '2 3 4 5 6 7'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 '
' 1e-5'
line_search = 'none'
nl_abs_tol = 1e-14
nl_rel_tol = 1e-10
start_time = 0.0
end_time = 0.3 # 3.5
l_tol = 1e-4
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3'
sort_by = id
[]
[y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3'
sort_by = id
[]
[cont_press]
type = NodalValueSampler
variable = penalty_normal_pressure
boundary = '3'
sort_by = id
[]
[friction]
type = NodalValueSampler
variable = penalty_frictional_pressure
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[console]
type = Console
max_rows = 5
[]
[chkfile]
type = CSV
show = 'x_disp y_disp cont_press friction'
file_base = cylinder_friction_penalty_check
create_final_symlink = true
execute_on = 'FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.4 # with 2.0 works
secondary_variable = disp_x
penalty = 5e9
penalty_friction = 1e7
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_adaptivity.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_coarser.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[disp_x]
order = FIRST
family = LAGRANGE
[]
[disp_y]
order = FIRST
family = LAGRANGE
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[react_x]
[]
[react_y]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[AuxKernels]
[penalty_normal_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel]
type = PenaltyMortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[penalty_gap]
type = PenaltyMortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[react_x]
type = TagVectorAux
vector_tag = 'ref'
v = 'disp_x'
variable = 'react_x'
[]
[react_y]
type = TagVectorAux
vector_tag = 'ref'
v = 'disp_y'
variable = 'react_y'
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = react_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = react_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = react_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = react_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
line_search = 'none'
nl_abs_tol = 1e-10
start_time = 0.0
end_time = 0.3 # 3.5
l_tol = 1e-4
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[console]
type = Console
max_rows = 5
[]
[vectorpp_output]
type = CSV
create_final_symlink = true
file_base = cylinder_friction_penalty_adaptivity
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.4
secondary_variable = disp_x
penalty = 5e7
penalty_friction = 5e8
[]
[geo]
type = GeometrySphere
boundary = 3
center = '0 4 0'
radius = 3
[]
[]
[Adaptivity]
[Markers]
[contact]
type = BoundaryMarker
mark = REFINE
next_to = 3
[]
[]
initial_marker = contact
initial_steps = 2
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/bouncing-block-contact/frictional-nodal-min-normal-lm-mortar-pdass-tangential-lm-mortar-disp.i)
starting_point = 2e-1
# We offset slightly so we avoid the case where the bottom of the secondary block and the top of the
# primary block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarse mesh (basic line search handles that fine)
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
[file_mesh]
type = FileMeshGenerator
file = long-bottom-block-1elem-blocks-coarse.e
[]
[]
[Variables]
[disp_x]
block = '1 2'
# order = SECOND
[]
[disp_y]
block = '1 2'
# order = SECOND
[]
[frictional_normal_lm]
block = 3
use_dual = true
[]
[frictional_tangential_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[]
[UserObjects]
[weighted_velocities_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = frictional_normal_lm
lm_variable_tangential_one = frictional_tangential_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[frictional_normal_lm]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_normal_lm
friction_lm = frictional_tangential_lm
disp_x = disp_x
disp_y = disp_y
mu = 0.1
c = 1.0e-2
c_t = 1.0e-1
weighted_gap_uo = weighted_velocities_uo
weighted_velocities_uo = weighted_velocities_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_velocities_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_velocities_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_velocities_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_velocities_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
(modules/contact/test/tests/bouncing-block-contact/variational-frictional.i)
starting_point = 2e-1
# We offset slightly so we avoid the case where the bottom of the secondary block and the top of the
# primary block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarse mesh (basic line search handles that fine)
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
correct_edge_dropping = true
[]
[Mesh]
[file_mesh]
type = FileMeshGenerator
file = long-bottom-block-1elem-blocks-coarse.e
[]
[]
[Variables]
[disp_x]
block = '1 2'
scaling = 1e1
[]
[disp_y]
block = '1 2'
scaling = 1e1
[]
[contact_action_normal_lm]
block = 4
scaling = 1e3
[]
[contact_action_tangential_lm]
block = 4
scaling = 1e2
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[]
[AuxVariables]
[procid]
family = MONOMIAL
order = CONSTANT
[]
[]
[AuxKernels]
[procid]
type = ProcessorIDAux
variable = procid
[]
[]
[UserObjects]
[weighted_velocities_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
lm_variable_normal = contact_action_normal_lm
lm_variable_tangential_one = contact_action_tangential_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
correct_edge_dropping = true
[]
[]
[Constraints]
[frictional_normal_lm]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = contact_action_normal_lm
friction_lm = contact_action_tangential_lm
disp_x = disp_x
disp_y = disp_y
mu = 0.1
normalize_c = true
c = 1.0e-2
c_t = 1.0e-1
correct_edge_dropping = true
weighted_velocities_uo = weighted_velocities_uo
weighted_gap_uo = weighted_velocities_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = contact_action_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_velocities_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = contact_action_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_velocities_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = contact_action_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_velocities_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = contact_action_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_velocities_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-15'
l_max_its = 30
nl_max_its = 25
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
hide = procid
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/contact/test/tests/3d-mortar-contact/half_sphere_nodal_geometry.i)
[Mesh]
[generated_mesh]
type = FileMeshGenerator
file = half_sphere.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 2002
new_block_name = 'secondary_lower'
sidesets = '202'
input = generated_mesh
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 1002
sidesets = '102'
new_block_name = 'primary_lower'
input = secondary
[]
patch_size = 20
patch_update_strategy = always
uniform_refine = 0
[]
[Problem]
kernel_coverage_check = false
[]
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
order = FIRST
family = LAGRANGE
[]
[Variables]
[frictional_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[frictional_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[frictional_tangential_dir_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[saved_x]
[]
[saved_y]
[]
[saved_z]
[]
[tangent_x]
family = LAGRANGE
order = FIRST
[]
[tangent_y]
family = LAGRANGE
order = FIRST
[]
[tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 102
secondary_boundary = 202
tangent_one = frictional_tangential_lm
tangent_two = frictional_tangential_dir_lm
variable = tangent_x
component = 0
boundary = 202
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 102
secondary_boundary = 202
tangent_one = frictional_tangential_lm
tangent_two = frictional_tangential_dir_lm
variable = tangent_y
component = 1
boundary = 202
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 102
secondary_boundary = 202
tangent_one = frictional_tangential_lm
tangent_two = frictional_tangential_dir_lm
variable = tangent_z
component = 2
boundary = 202
[]
[]
[Functions]
[push_down]
type = ParsedFunction
expression = 'if(t < 1.5, -t, t-3.0)'
[]
[force_z]
type = ParsedFunction
expression = 'if(t < 0.008, 0.0, (-t)*2.0e2 -t*t*100.0)' # 4.0e5
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = true
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
save_in = 'saved_x saved_y saved_z'
use_finite_deform_jacobian = true
[]
[]
[BCs]
[botz]
type = ADDirichletBC
variable = disp_z
boundary = 101
value = 0.0
[]
[boty]
type = ADDirichletBC
variable = disp_y
boundary = 101
value = 0.0
[]
[botx]
type = ADDirichletBC
variable = disp_x
boundary = 101
value = 0.0
[]
[topz]
type = ADFunctionDirichletBC
variable = disp_z
boundary = '201'
function = push_down
[]
[topy]
type = ADDirichletBC
variable = disp_y
boundary = '201 202'
value = 0.0
[]
[topx]
type = ADDirichletBC
variable = disp_x
boundary = '201 202'
value = 0.0
[]
[]
[Materials]
[tensor]
type = ADComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.40625e7
poissons_ratio = 0.25
[]
[stress]
type = ADComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ADComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ADComputeFiniteStrainElasticStress
block = '2'
[]
[]
[Postprocessors]
[stress_zz]
type = ElementAverageValue
variable = stress_zz
block = 1
[]
[resid_z]
type = NodalSum
variable = saved_z
boundary = 201
[]
[disp_z]
type = NodalExtremeValue
variable = disp_z
boundary = 201
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_package -pc_factor_shift_type '
'-pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist nonzero 1e-14 1e-5'
line_search = 'none'
l_max_its = 60
nl_max_its = 50
dt = 0.004
dtmin = 0.00001
# end_time = 1.8
end_time = 0.000
nl_rel_tol = 1.0e-6 #1e-7 # -8, -6 to avoid many iterations. Switch it March 2021
nl_abs_tol = 1e-6 # 6 if no friction
l_tol = 1e-4
[]
[Outputs]
exodus = true
csv = true
print_linear_residuals = true
perf_graph = true
[console]
type = Console
max_rows = 5
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
lm_variable_normal = frictional_normal_lm
lm_variable_tangential_one = frictional_tangential_lm
lm_variable_tangential_two = frictional_tangential_dir_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
debug_mesh = true
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
friction_lm = frictional_tangential_lm
friction_lm_dir = frictional_tangential_dir_lm
c = 7.0e4
c_t = 7.0e4
mu = 0.4
debug_mesh = true
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_x_dir]
type = TangentialMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_tangential_dir_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y_dir]
type = TangentialMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_tangential_dir_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z_dir]
type = TangentialMortarMechanicalContact
primary_boundary = 102
secondary_boundary = 202
primary_subdomain = 1002
secondary_subdomain = 2002
variable = frictional_tangential_dir_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
weighted_velocities_uo = weighted_vel_uo
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d-dynamics-light-function.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 1
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 1
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
[]
[Functions]
# x: Contact pressure
# y: Magnitude of tangential relative velocity
# z: Temperature (to be implemented)
[mu_function]
type = ParsedFunction
expression = '0.3 + 0.5 * 2.17^(-x/100) - 10.0 * y'
[]
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
scaling = 1e-3
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
scaling = 1e-3
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
scaling = 1e-3
[]
[]
[Physics/SolidMechanics/Dynamic]
[all]
add_variables = true
hht_alpha = 0.0
newmark_beta = 0.25
newmark_gamma = 0.5
mass_damping_coefficient = 0.0
stiffness_damping_coefficient = 0.02
displacements = 'disp_x disp_y disp_z'
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
block = '1 2'
strain = FINITE
density = density
[]
[]
[Materials]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '1.0'
[]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[friction]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
c = 1e5
c_t = 1.0e5
newmark_beta = 0.25
newmark_gamma = 0.5
interpolate_normals = false
correct_edge_dropping = true
capture_tolerance = 1e-04
function_friction = mu_function
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
interpolate_normals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back bottom_top bottom_bottom'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back bottom_top bottom_bottom'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back bottom_top bottom_bottom'
value = 0.0
[]
[topx]
type = FunctionDirichletBC
variable = disp_x
boundary = 'top_top'
function = '0.1*t'
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-0.1*t'
[]
[]
[Executioner]
type = Transient
end_time = .04
dt = .02
dtmin = .001
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type'
petsc_options_value = ' lu NONZERO '
nl_rel_tol = 5e-13
nl_abs_tol = 5e-13
line_search = 'basic'
[TimeIntegrator]
type = NewmarkBeta
gamma = 0.5
beta = 0.25
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[]
(modules/contact/test/tests/pdass_problems/ironing_penalty_al.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = iron.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '10'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '20'
new_block_name = 'primary_lower'
input = secondary
[]
patch_update_strategy = auto
patch_size = 20
allow_renumbering = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[real_weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[von_mises]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 2. 8.'
y = '0. -1.0 -1.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 8.'
y = '0. 8.'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
block = '1 2'
strain = FINITE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = PenaltyMortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[real_weighted_gap_auxk]
type = PenaltyMortarUserObjectAux
variable = real_weighted_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = RankTwoScalarAux
variable = von_mises
rank_two_tensor = stress
execute_on = timestep_end
scalar_type = VonMisesStress
block = '1 2'
[]
[]
# [VectorPostprocessors]
# [penalty_normal_pressure]
# type = NodalValueSampler
# variable = penalty_normal_pressure
# boundary = 10
# sort_by = id
# []
# []
[Postprocessors]
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[force_x]
type = NodalSum
boundary = 30
variable = saved_x
[]
[force_y]
type = NodalSum
boundary = 30
variable = saved_y
[]
[gap]
type = SideExtremeValue
value_type = min
variable = real_weighted_gap
boundary = 10
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[]
[BCs]
[bot_x_disp]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
preset = false
[]
[bot_y_disp]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
preset = false
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = '30'
function = disp_ramp_vert
preset = false
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = '30'
function = disp_ramp_horz
preset = false
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 6896
poissons_ratio = 0.32
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '2'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 689.6
poissons_ratio = 0.32
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-7
l_tol = 1e-6
l_max_its = 7
nl_max_its = 300
start_time = 0.0
end_time = 6.5
dt = 0.0125
dtmin = 1e-5
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = true
# [chkfile]
# type = CSV
# start_time = 0.0
# execute_vector_postprocessors_on = FINAL
# []
[console]
type = Console
max_rows = 5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.4 # with 2.0 works
secondary_variable = disp_x
penalty = 5e5
penalty_friction = 1e4
slip_tolerance = 1e-05
penetration_tolerance = 1e-03
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[t_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[t_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/combined/test/tests/nodal_patch_recovery/npr_with_lower_domains.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
[Mesh]
patch_size = 80
patch_update_strategy = auto
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = '${fparse 2.0 / (E_plank + E_block)}'
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = '${fparse 2.0 / (E_plank + E_block)}'
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[AuxVariables]
[stress_xx]
order = FIRST
family = MONOMIAL
block = 'plank block'
[]
[stress_yy]
order = FIRST
family = MONOMIAL
block = 'plank block'
[]
[stress_xx_recovered]
order = FIRST
family = LAGRANGE
block = 'plank block'
[]
[stress_yy_recovered]
order = FIRST
family = LAGRANGE
block = 'plank block'
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = 'timestep_end'
block = 'plank block'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = 'timestep_end'
block = 'plank block'
[]
[stress_xx_recovered]
type = NodalPatchRecoveryAux
variable = stress_xx_recovered
nodal_patch_recovery_uo = stress_xx_patch
execute_on = 'TIMESTEP_END'
block = 'plank block'
[]
[stress_yy_recovered]
type = NodalPatchRecoveryAux
variable = stress_yy_recovered
nodal_patch_recovery_uo = stress_yy_patch
execute_on = 'TIMESTEP_END'
block = 'plank block'
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = false
strain = FINITE
[]
[]
[Kernels]
[hc]
type = HeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[stress_xx_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '0 0'
execute_on = 'NONLINEAR TIMESTEP_END'
block = 'plank block'
[]
[stress_yy_patch]
type = NodalPatchRecoveryMaterialProperty
patch_polynomial_order = FIRST
property = 'stress'
component = '1 1'
execute_on = 'NONLINEAR TIMESTEP_END'
block = 'plank block'
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceConstraint
variable = thermal_lm
secondary_variable = temp
k = 1
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
[]
[]
[BCs]
[left_temp]
type = DirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = DirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = FunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
preset = false
[]
[right_y]
type = FunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
preset = false
[]
[]
[Materials]
[plank]
type = ComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = 'plank block'
[]
[heat_plank]
type = HeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = HeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 0.4
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
[]
[Postprocessors]
[nl_its]
type = NumNonlinearIterations
[]
[total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[]
[l_its]
type = NumLinearIterations
[]
[total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[]
[contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_secondary_subdomain
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[stress_xx_recovered]
type = ElementExtremeValue
variable = stress_xx_recovered
block = 'block'
value_type = max
[]
[stress_yy_recovered]
type = ElementExtremeValue
variable = stress_yy_recovered
block = 'block'
value_type = max
[]
[]
[Outputs]
exodus = true
[comp]
type = CSV
show = 'contact avg_temp'
[]
[out]
type = CSV
[]
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-penalty.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_one]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_two]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_two]
order = FIRST
family = LAGRANGE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_one_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure_one
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_frictional_pressure_two_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure_two
user_object = friction_uo
contact_quantity = tangential_pressure_two
[]
[penalty_accumulated_slip_two_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_two
user_object = friction_uo
contact_quantity = accumulated_slip_two
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
allow_renumbering = false
[]
[Variables]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e5
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
# Other object should mix formulations
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
friction_coefficient = 0.4
secondary_variable = disp_x
penalty = 1e8
penalty_friction = 5e6
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
[VectorPostprocessors]
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/small-2d-rz/small.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'small'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[Problem]
coord_type = RZ
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
[]
[]
[Kernels]
[hc]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceConstraint
variable = thermal_lm
secondary_variable = temp
k = 1
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
[]
[]
[BCs]
[left_temp]
type = DirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = DirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
preset = false
[]
[right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
preset = false
[]
[]
[Materials]
[plank]
type = ADComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ADComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ADComputeLinearElasticStress
block = 'plank block'
[]
[heat_plank]
type = ADHeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = ADHeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
[]
[Postprocessors]
[nl_its]
type = NumNonlinearIterations
[]
[total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[]
[l_its]
type = NumLinearIterations
[]
[total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[]
[contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_secondary_subdomain
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[]
[Outputs]
file_base = ${name}
[comp]
type = CSV
show = 'contact avg_temp'
[]
[out]
type = CSV
file_base = '${name}_out'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d-penalty.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = normal_uo
contact_quantity = normal_pressure
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
# Other object should mix formulations
[UserObjects]
[normal_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
penalty = 1e8
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = normal_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = normal_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = normal_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-12
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
[VectorPostprocessors]
[]
(modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_3d.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1.0
xmax = 0.0
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX8
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'left_bottom left_back left_right left_front left_left left_top'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
xmin = 0.0
xmax = 1.0
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX8
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3 4 5'
# new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
new_boundary = '100 101 102 103 104 105'
[]
[right_block_sidesets_rename]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '100 101 102 103 104 105'
new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets_rename
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = 'left_right'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = 'right_left'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = PiecewiseLinear
x = '0 0.5'
y = '0 0.2'
[]
[vertical_movement]
type = PiecewiseLinear
x = '0 1.0'
y = '0 0'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 'left_left'
function = horizontal_movement
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 'left_left'
function = vertical_movement
[]
[fix_left_z]
type = DirichletBC
variable = disp_z
boundary = 'left_left'
value = 0.0
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 'right_right'
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 'right_right'
value = 0.0
[]
[fix_right_z]
type = DirichletBC
variable = disp_z
boundary = 'right_right'
value = 0.0
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
correct_edge_dropping = true
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist nonzero 1e-10'
line_search = 'none'
dt = 0.1
dtmin = 0.01
end_time = 0.4
l_max_its = 20
nl_max_its = 20
nl_rel_tol = 1e-6
nl_abs_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
csv = true
execute_on = 'FINAL'
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = 'secondary_lower'
[]
[normal_lm]
type = ElementAverageValue
variable = normal_lm
block = 'secondary_lower'
[]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[]
(modules/contact/test/tests/pdass_problems/ironing.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = iron.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '10'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '20'
new_block_name = 'primary_lower'
input = secondary
[]
patch_update_strategy = auto
patch_size = 20
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[frictionless_normal_lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
use_dual = true
[]
[tangential_lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[von_mises]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 2. 8.'
y = '0. -1.0 -1.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 8.' # x = '0. 2. 8.'
y = '0. 8.' # y = '0. 0. 8'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
block = '1 2'
strain = FINITE
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = RankTwoScalarAux
variable = von_mises
rank_two_tensor = stress
execute_on = timestep_end
scalar_type = VonMisesStress
block = '1 2'
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 20
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 20
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 10
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 10
[]
[_dt]
type = TimestepSize
[]
[contact_pressure]
type = NodalVariableValue
variable = frictionless_normal_lm
nodeid = 805
[]
[]
[BCs]
[bot_x_disp]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
preset = false
[]
[bot_y_disp]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
preset = false
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = '30'
function = disp_ramp_vert
preset = false
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = '30'
function = disp_ramp_horz
preset = false
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 6896
poissons_ratio = 0.32
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '2'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 689.6
poissons_ratio = 0.32
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-7
l_tol = 1e-6
l_max_its = 50
nl_max_its = 30
start_time = 0.0
end_time = 0.1 # 6.5
dt = 0.0125
dtmin = 1e-5
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[cont_press]
type = NodalValueSampler
variable = frictionless_normal_lm
boundary = '10'
sort_by = id
execute_on = FINAL
[]
[friction]
type = NodalValueSampler
variable = tangential_lm
boundary = '10'
sort_by = id
execute_on = FINAL
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = false
csv = true
[chkfile]
type = CSV
show = 'cont_press friction'
start_time = 0.0
execute_vector_postprocessors_on = FINAL
[]
[console]
type = Console
max_rows = 5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
lm_variable_normal = frictionless_normal_lm
lm_variable_tangential_one = tangential_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
# All constraints below for mechanical contact (Mortar)
[weighted_gap_lm]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
friction_lm = tangential_lm
mu = 0.5
c_t = 1.0e1
c = 1.0e3
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = '10000'
secondary_subdomain = '10001'
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = '10000'
secondary_subdomain = '10001'
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = '10000'
secondary_subdomain = '10001'
variable = tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = '10000'
secondary_subdomain = '10001'
variable = tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
(modules/contact/test/tests/cohesive_zone_model/mortar_czm.i)
[Mesh]
[msh]
type = GeneratedMeshGenerator
dim = 2
xmax = 1
ymax = 1
nx = 5
ny = 5
boundary_name_prefix = bottom
[]
[msh_id]
type = SubdomainIDGenerator
input = msh
subdomain_id = 1
[]
[msh_two]
type = GeneratedMeshGenerator
dim = 2
xmax = 1
ymin = 1
ymax = 2
nx = 5
ny = 5
boundary_name_prefix = top
boundary_id_offset = 10
[]
[msh_two_id]
type = SubdomainIDGenerator
input = msh_two
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'msh_id msh_two_id'
[]
[top_node]
type = ExtraNodesetGenerator
coord = '0 2 0'
input = combined
new_boundary = top_node
[]
[bottom_node]
type = ExtraNodesetGenerator
coord = '0 0 0'
input = top_node
new_boundary = bottom_node
[]
# Build subdomains
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = 'bottom_top'
input = bottom_node
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = 'top_bottom'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
generate_output = 'stress_yy'
[all]
strain = FINITE
add_variables = true
use_automatic_differentiation = true
decomposition_method = TaylorExpansion
block = '1 2'
[]
[]
[]
[]
[BCs]
[fix_x]
type = DirichletBC
preset = true
value = 0.0
boundary = bottom_node
variable = disp_x
[]
[fix_top]
type = DirichletBC
preset = true
boundary = top_top
variable = disp_x
value = 0
[]
[top]
type = FunctionDirichletBC
boundary = top_top
variable = disp_y
function = 'if(t<=0.3,t,if(t<=0.6,0.3-(t-0.3),0.6-t))'
preset = true
[]
[bottom]
type = DirichletBC
boundary = bottom_bottom
variable = disp_y
value = 0
preset = true
[]
[]
[AuxVariables]
[]
[AuxKernels]
[]
[Materials]
[stress]
type = ADComputeFiniteStrainElasticStress
block = '1 2'
[]
[elasticity_tensor]
type = ADComputeElasticityTensor
fill_method = symmetric9
C_ijkl = '1.684e5 0.176e5 0.176e5 1.684e5 0.176e5 1.684e5 0.754e5 0.754e5 0.754e5'
block = '1 2'
[]
[normal_strength]
type = GenericFunctionMaterial
prop_names = 'N'
prop_values = 'if(x<0.5,1,100)*1e4'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
line_search = none
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
automatic_scaling = true
l_max_its = 2
l_tol = 1e-14
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-11
start_time = 0.0
dt = 0.01
end_time = 0.05
dtmin = 0.01
[]
[Outputs]
exodus = true
[]
[UserObjects]
[czm_uo]
type = BilinearMixedModeCohesiveZoneModel
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.1 # with 2.0 works
secondary_variable = disp_x
penalty = 0e6
penalty_friction = 1e4
use_physical_gap = true
correct_edge_dropping = true
normal_strength = N
shear_strength = 1e3
viscosity = 1e-3
penalty_stiffness = 1e6
power_law_parameter = 2.2
GI_c = 1e3
GII_c = 1e2
displacements = 'disp_x disp_y'
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = czm_uo
correct_edge_dropping = true
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = czm_uo
correct_edge_dropping = true
[]
[c_x]
type = MortarGenericTraction
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
cohesive_zone_uo = czm_uo
correct_edge_dropping = true
[]
[c_y]
type = MortarGenericTraction
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
cohesive_zone_uo = czm_uo
correct_edge_dropping = true
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_test_nochange.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[dual_var]
use_dual = true
block = '10001'
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[normal_lm]
type = PenaltyMortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = PenaltyMortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'none'
nl_abs_tol = 1e-12
nl_rel_tol = 1e-8
nl_max_its = 1300
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 1.0 # 3.5
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
penetration_tolerance = 1e-8
use_mortar_scaled_gap = true
aux_lm = dual_var
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-fretting-wear-test-projection_angle.i)
starting_point = 0.5e-1
offset = -0.045
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks-multiple-projections-lowerd.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
# scaling = 1.0e-5
[]
[frictional_lm]
block = 3
use_dual = true
# scaling = 1.0e-5
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 1.0
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[worn_depth]
block = '3'
[]
[gap_vel]
block = '3'
[]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[]
[AuxKernels]
[gap_vel]
type = WeightedGapVelAux
variable = gap_vel
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
disp_x = disp_x
disp_y = disp_y
debug_mesh = true
minimum_projection_angle = 0.0
[]
[worn_depth]
type = MortarArchardsLawAux
variable = worn_depth
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
displacements = 'disp_x disp_y'
friction_coefficient = 0.5
energy_wear_coefficient = 1.0e-6
normal_pressure = normal_lm
execute_on = 'TIMESTEP_END'
debug_mesh = true
minimum_projection_angle = 0.0
[]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
lm_variable_normal = normal_lm
lm_variable_tangential_one = frictional_lm
disp_x = disp_x
disp_y = disp_y
debug_mesh = true
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
wear_depth = worn_depth
c = 1e6
c_t = 1e6
normalize_c = true
mu = 0.5
friction_lm = frictional_lm
capture_tolerance = 1.0e-5
newmark_beta = 0.25
newmark_gamma = 0.5
debug_mesh = true
minimum_projection_angle = 0.0
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
minimum_projection_angle = 0.0
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
minimum_projection_angle = 0.0
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
minimum_projection_angle = 0.0
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
debug_mesh = true
minimum_projection_angle = 0.0
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(4.0 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * (cos(32.0 * pi / 4 * t) - 1.0)'
[]
[]
[Executioner]
type = Transient
end_time = 0.0
dt = 0.05
dtmin = .002
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15'
nl_max_its = 40
l_max_its = 15
line_search = 'l2'
snesmf_reuse_base = true
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/pdass_problems/ironing_penalty.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = iron.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '10'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '20'
new_block_name = 'primary_lower'
input = secondary
[]
patch_update_strategy = auto
patch_size = 20
allow_renumbering = false
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[tangential_vel_one]
order = FIRST
family = LAGRANGE
[]
[real_weighted_gap]
order = FIRST
family = LAGRANGE
[]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[von_mises]
order = CONSTANT
family = MONOMIAL
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 2. 8.'
y = '0. -1.0 -1.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 8.'
y = '0. 8.'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
block = '1 2'
strain = FINITE
[]
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_tangential_vel_auxk]
type = PenaltyMortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
[]
[real_weighted_gap_auxk]
type = PenaltyMortarUserObjectAux
variable = real_weighted_gap
user_object = friction_uo
contact_quantity = normal_gap
[]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2'
[]
[von_mises_kernel]
#Calculates the von mises stress and assigns it to von_mises
type = RankTwoScalarAux
variable = von_mises
rank_two_tensor = stress
execute_on = timestep_end
scalar_type = VonMisesStress
block = '1 2'
[]
[]
[VectorPostprocessors]
[penalty_normal_pressure]
type = NodalValueSampler
variable = penalty_normal_pressure
boundary = 10
sort_by = id
[]
[]
[BCs]
[bot_x_disp]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
preset = false
[]
[bot_y_disp]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
preset = false
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = '30'
function = disp_ramp_vert
preset = false
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = '30'
function = disp_ramp_horz
preset = false
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 6896
poissons_ratio = 0.32
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '2'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 689.6
poissons_ratio = 0.32
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
line_search = 'none'
nl_abs_tol = 1e-7
nl_rel_tol = 1e-7
l_tol = 1e-6
l_max_its = 50
nl_max_its = 30
start_time = 0.0
end_time = 6.5
dt = 0.0125
dtmin = 1e-5
[Predictor]
type = SimplePredictor
scale = 1.0
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = true
[chkfile]
type = CSV
start_time = 0.0
execute_vector_postprocessors_on = FINAL
[]
[console]
type = Console
max_rows = 5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.1 # with 2.0 works
secondary_variable = disp_x
penalty = 1e5
penalty_friction = 1e4
use_physical_gap = true
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[t_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[t_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d-rz/finite.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = auto
coord_type = RZ
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = 0
xmax = 0.6
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.61
xmax = 1.21
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
strain = FINITE
[]
[]
[Kernels]
[hc]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceConstraint
variable = thermal_lm
secondary_variable = temp
k = 1
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
[]
[]
[BCs]
[left_temp]
type = DirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = DirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
preset = false
[]
[right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
preset = false
[]
[]
[Materials]
[plank]
type = ADComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ADComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[]
[heat_plank]
type = ADHeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = ADHeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
[]
[Postprocessors]
[nl_its]
type = NumNonlinearIterations
[]
[total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[]
[l_its]
type = NumLinearIterations
[]
[total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[]
[contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_secondary_subdomain
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[]
[Outputs]
file_base = ${name}
[comp]
type = CSV
show = 'contact avg_temp'
[]
[out]
type = CSV
file_base = '${name}_out'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-fretting-wear-test.i)
starting_point = 0.5e-1
offset = -0.045
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
# scaling = 1.0e-5
[]
[frictional_lm]
block = 3
use_dual = true
scaling = 1.0e-5
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 0.04
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[worn_depth]
block = '3'
[]
[gap_vel]
block = '3'
[]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[]
[AuxKernels]
[gap_vel]
type = WeightedGapVelAux
variable = gap_vel
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
disp_x = disp_x
disp_y = disp_y
[]
[worn_depth]
type = MortarArchardsLawAux
variable = worn_depth
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
displacements = 'disp_x disp_y'
friction_coefficient = 0.5
energy_wear_coefficient = 1.0e-6
normal_pressure = normal_lm
execute_on = 'TIMESTEP_END'
[]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
lm_variable_normal = normal_lm
lm_variable_tangential_one = frictional_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
wear_depth = worn_depth
c = 1e6
c_t = 1e6
normalize_c = true
mu = 0.5
friction_lm = frictional_lm
capture_tolerance = 1.0e-5
newmark_beta = 0.25
newmark_gamma = 0.5
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(4.0 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-5 * (cos(32.0 * pi / 4 * t) - 1.0)'
[]
[]
[Executioner]
type = Transient
end_time = 0.5
dt = 0.05
dtmin = .002
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15'
nl_max_its = 40
l_max_its = 15
line_search = none
snesmf_reuse_base = true
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[friction]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
mu = 0.4
c = 1e4
c_t = 1.0e4
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-14 1e-5'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-12
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = NONLINEAR
[]
[]
(modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d-dynamics-light.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 1
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 1
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/Dynamic]
[all]
add_variables = true
hht_alpha = 0.0
newmark_beta = 0.25
newmark_gamma = 0.5
mass_damping_coefficient = 0.0
stiffness_damping_coefficient = 0.1
displacements = 'disp_x disp_y disp_z'
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
block = '1 2'
strain = FINITE
density = density
[]
[]
[Materials]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '1.0'
[]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[friction]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
mu = 0.4
c = 1e4
c_t = 1.0e4
newmark_beta = 0.25
newmark_gamma = 0.5
correct_edge_dropping = true
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-14'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-11
line_search = 'basic'
[TimeIntegrator]
type = NewmarkBeta
gamma = 0.5
beta = 0.25
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-wear.i)
starting_point = 0.5e-1
offset = -0.05
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 1.0
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[worn_depth]
block = '3'
[]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[]
[AuxKernels]
[worn_depth]
type = MortarArchardsLawAux
variable = worn_depth
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
displacements = 'disp_x disp_y'
friction_coefficient = 0.5
energy_wear_coefficient = 1.0
normal_pressure = normal_lm
[]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicWeightedGapLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1e4
capture_tolerance = 1.0e-5
newmark_beta = 0.25
newmark_gamma = 0.5
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(8.0 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 0.675
dt = 0.075
dtmin = .075
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount '
petsc_options_value = 'lu superlu_dist NONZERO 1e-15'
nl_max_its = 30
line_search = 'l2'
snesmf_reuse_base = false
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al_tight_slip.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[dual_var]
use_dual = true
block = '10001'
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = PenaltyMortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = PenaltyMortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = PenaltyMortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'basic'
nl_abs_tol = 1e-13
nl_rel_tol = 1e-11
nl_max_its = 75
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.1 # 3.5
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e5
secondary_variable = disp_x
friction_coefficient = 0.4
penetration_tolerance = 1e-7
slip_tolerance = 1e-8
penalty_friction = 1e6
penalty_multiplier = 10
use_physical_gap = true
aux_lm = dual_var
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al_backup.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
maximum_lagrangian_update_iterations = 1000
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 0.1 0.2'
y = '0. -0.020 0.0'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[normal_lm]
type = PenaltyMortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = PenaltyMortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 1300
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
penalty_multiplier = 10
penetration_tolerance = 1e-12
use_physical_gap = true
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d_pg.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[aux_lm]
block = 'secondary_lower'
use_dual = false
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_petrov_galerkin = true
aux_lm = aux_lm
[]
[]
[Constraints]
[friction]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
mu = 0.4
c = 1e4
c_t = 1.0e4
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-14 1e-5'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-12
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = NONLINEAR
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-function.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[Functions]
# x: Contact pressure
# y: Magnitude of tangential relative velocity
# z: Temperature (to be implemented)
[mu_function]
type = ParsedFunction
expression = '0.3 + (0.7 - 0.3) * 2.17^(-0.5/y) - x/10000'
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[friction]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
# mu = 0.4
function_friction = mu_function
c = 1e4
c_t = 1.0e6
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 'top_top'
function = '0.1*t'
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .05
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-14 1e-5'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-12
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = NONLINEAR
[]
[]
(modules/contact/test/tests/mortar_dynamics/block-dynamics-friction.i)
starting_point = 2e-1
offset = -0.19
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
allow_renumbering = false
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[mechanical_normal_lm]
block = 3
use_dual = true
[]
[mechanical_tangential_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 0.05
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[gap]
block = 3
[]
[]
[AuxKernels]
[gap]
type = WeightedGapAux
variable = gap
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
use_displaced_mesh = true
[]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'LINEAR timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'LINEAR timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'LINEAR timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'LINEAR timestep_end'
[]
[]
# User object provides the contact force (e.g. LM)
# for the application of the generalized force
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = mechanical_normal_lm
lm_variable_tangential_one = mechanical_tangential_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = mechanical_normal_lm
friction_lm = mechanical_tangential_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1e4
c_t = 1e4
mu = 0.5
newmark_beta = 0.25
newmark_gamma = 0.5
capture_tolerance = 1.0e-5
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = mechanical_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = mechanical_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = mechanical_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = mechanical_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 30 # 50
function = '0' # '1e-2*t'
[]
[]
[Executioner]
type = Transient
end_time = 75
dt = 0.05
dtmin = .005
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err '
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
nl_max_its = 50
line_search = 'none'
snesmf_reuse_base = false
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[mechanical_tangential_lm]
type = NodalValueSampler
block = '3'
variable = mechanical_tangential_lm
sort_by = 'x'
execute_on = TIMESTEP_END
[]
[]
(modules/contact/test/tests/bouncing-block-contact/frictional-mortar-min-lm-mortar-disp.i)
starting_point = 2e-1
# We offset slightly so we avoid the case where the bottom of the secondary block and the top of the
# primary block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarse mesh (basic line search handles that fine)
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[./disp_x]
block = '1 2'
# order = SECOND
[../]
[./disp_y]
block = '1 2'
# order = SECOND
[../]
[./normal_lm]
block = 3
family = MONOMIAL
order = CONSTANT
[../]
[./tangential_lm]
block = 3
family = MONOMIAL
order = CONSTANT
[../]
[]
[ICs]
[./disp_y]
block = 2
variable = disp_y
value = ${fparse starting_point + offset}
type = ConstantIC
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[Constraints]
[normal_lm]
type = NormalMortarLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
secondary_disp_y = disp_y
use_displaced_mesh = true
compute_primal_residuals = false
ncp_function_type = min
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_lm]
type = TangentialMortarLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = tangential_lm
secondary_variable = disp_x
secondary_disp_y = disp_y
use_displaced_mesh = true
compute_primal_residuals = false
contact_pressure = normal_lm
friction_coefficient = .1
ncp_function_type = min
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
[]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
preset = false
boundary = 40
value = 0.0
[../]
[./boty]
type = DirichletBC
variable = disp_y
preset = false
boundary = 40
value = 0.0
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
preset = false
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[../]
[./leftx]
type = FunctionDirichletBC
variable = disp_x
preset = false
boundary = 50
function = '1e-2 * t'
[../]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Postprocessors]
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/bouncing-block-contact/mixed-weighted-gap-swapped.i)
starting_point = 2e-1
# We offset slightly so we avoid the case where the bottom of the secondary block and the top of the
# primary block are perfectly vertically aligned which can cause the backtracking line search some
# issues for a coarse mesh (basic line search handles that fine)
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
correct_edge_dropping = true
[]
[Mesh]
second_order = true
[file_mesh]
type = FileMeshGenerator
file = long-bottom-block-1elem-blocks-coarse.e
[]
[]
[Variables]
[disp_x]
block = '1 2'
scaling = 1e1
order = SECOND
[]
[disp_y]
block = '1 2'
scaling = 1e1
order = SECOND
[]
[frictional_normal_lm]
block = 4
scaling = 1e3
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
lm_variable = frictional_normal_lm
disp_x = disp_x
disp_y = disp_y
correct_edge_dropping = true
[]
[]
[Constraints]
[frictional_normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = frictional_normal_lm
disp_x = disp_x
disp_y = disp_y
normalize_c = true
c = 1.0e-2
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = frictional_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 10
secondary_boundary = 20
primary_subdomain = 3
secondary_subdomain = 4
variable = frictional_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-15'
l_max_its = 30
nl_max_its = 25
line_search = 'none'
nl_rel_tol = 1e-12
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
second_order = false
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[disp_z]
block = '1 2'
[]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[ICs]
[disp_z]
block = 1
variable = disp_z
value = '${fparse offset}'
type = ConstantIC
[]
[disp_x]
block = 1
variable = disp_x
value = 0
type = ConstantIC
[]
[disp_y]
block = 1
variable = disp_y
value = 0
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[disp_z]
type = MatDiffusion
variable = disp_z
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = .5
dtmin = .01
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
l_max_its = 100
nl_max_its = 30
# nl_rel_tol = 1e-6
nl_abs_tol = 1e-12
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/block-dynamics-aux-wear-vel.i)
starting_point = 0.5e-1
offset = -0.05
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
scaling = 1.0e3
[]
[frictional_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 1.0
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[worn_depth]
block = '3'
[]
[gap_vel]
block = '3'
[]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[]
[AuxKernels]
[gap_vel]
type = WeightedGapVelAux
variable = gap_vel
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
disp_x = disp_x
disp_y = disp_y
[]
[worn_depth]
type = MortarArchardsLawAux
variable = worn_depth
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
displacements = 'disp_x disp_y'
friction_coefficient = 0.5
energy_wear_coefficient = 1.0
normal_pressure = normal_lm
[]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'linear timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'linear timestep_end'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
lm_variable_normal = normal_lm
lm_variable_tangential_one = frictional_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1e4
c_t = 1e6
mu = 0.15
friction_lm = frictional_lm
capture_tolerance = 1.0e-5
newmark_beta = 0.25
newmark_gamma = 0.5
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(16.0 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 0.3
dt = 0.03
dtmin = .002
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15'
nl_max_its = 40
nl_abs_tol = 1.0e-11
nl_rel_tol = 1.0e-11
line_search = 'none'
snesmf_reuse_base = true
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/bouncing-block-contact/frictional-penalty-weighted-vel.i)
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
preset = false
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[]
[UserObjects]
[weighted_vel_uo]
type = PenaltyFrictionUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
penalty = 5e1
penalty_friction = 1e0
friction_coefficient = 0.4
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangent_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangent_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = true
abort_on_solve_fail = true
nl_rel_tol = 1e-12
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[]
(modules/contact/test/tests/sliding_block/edge_dropping/two_equal_blocks_slide_3d.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1.0
xmax = 0.0
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX8
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'left_bottom left_back left_right left_front left_left left_top'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
xmin = 0.0
xmax = 1.0
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX8
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3 4 5'
# new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
new_boundary = '100 101 102 103 104 105'
[]
[right_block_sidesets_rename]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '100 101 102 103 104 105'
new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets_rename
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = 'left_right'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = 'right_left'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = PiecewiseLinear
x = '0 0.1 4'
y = '0 0.05 0.05'
[]
[vertical_movement]
type = PiecewiseLinear
x = '0 0.1 4'
y = '0 0 0.3'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 'left_left'
function = horizontal_movement
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 'left_left'
function = vertical_movement
[]
[fix_left_z]
type = DirichletBC
variable = disp_z
boundary = 'left_left'
value = 0.0
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 'right_right'
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 'right_right'
value = 0.0
[]
[fix_right_z]
type = DirichletBC
variable = disp_z
boundary = 'right_right'
value = 0.0
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist nonzero 1e-10'
line_search = 'none'
dt = 0.1
dtmin = 0.01
end_time = 0.4
l_max_its = 20
nl_max_its = 20
nl_rel_tol = 1e-6
nl_abs_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
csv = true
execute_on = 'FINAL'
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = 'secondary_lower'
[]
[normal_lm]
type = ElementAverageValue
variable = normal_lm
block = 'secondary_lower'
[]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/finite.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
strain = FINITE
[]
[]
[Kernels]
[hc]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceConstraint
variable = thermal_lm
secondary_variable = temp
k = 1
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
[]
[]
[BCs]
[left_temp]
type = ADDirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = ADDirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = ADDirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = ADDirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
preset = false
[]
[right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
preset = false
[]
[]
[Materials]
[plank]
type = ADComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ADComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[]
[heat_plank]
type = ADHeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = ADHeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
[]
[Postprocessors]
[nl_its]
type = NumNonlinearIterations
[]
[total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[]
[l_its]
type = NumLinearIterations
[]
[total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[]
[contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_secondary_subdomain
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[]
[Outputs]
file_base = ${name}
[comp]
type = CSV
show = 'contact avg_temp'
[]
[out]
type = CSV
file_base = '${name}_out'
[]
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/3d-mortar-contact/frictional-mortar-3d-al.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[penalty_normal_pressure]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_one]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_one]
order = FIRST
family = LAGRANGE
[]
[penalty_frictional_pressure_two]
order = FIRST
family = LAGRANGE
[]
[accumulated_slip_two]
order = FIRST
family = LAGRANGE
[]
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
[]
[AuxKernels]
[penalty_normal_pressure_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
[]
[penalty_frictional_pressure_one_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure_one
user_object = friction_uo
contact_quantity = tangential_pressure_one
[]
[penalty_accumulated_slip_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
[]
[penalty_frictional_pressure_two_auxk]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure_two
user_object = friction_uo
contact_quantity = tangential_pressure_two
[]
[penalty_accumulated_slip_two_auxk]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_two
user_object = friction_uo
contact_quantity = accumulated_slip_two
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
allow_renumbering = false
[]
[Variables]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e5
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
# Other object should mix formulations
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
friction_coefficient = 0.4
secondary_variable = disp_x
penalty = 1e0
penalty_friction = 1e1
slip_tolerance = 7.0e-4 # 1e-6
penetration_tolerance = 7.0e-4
# max_penalty_multiplier = 10
penalty_multiplier = 10
penalty_multiplier_friction = 5
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type'
petsc_options_value = 'lu superlu_dist'
l_max_its = 15
nl_max_its = 90
nl_rel_tol = 1e-12
nl_abs_tol = 1e-13
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[]
[VectorPostprocessors]
[]
(modules/contact/test/tests/mortar_dynamics/block-dynamics-friction-creep.i)
starting_point = 1e-1
offset = -0.095
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[normal_lm]
block = 3
use_dual = true
[]
[frictional_lm]
block = 3
use_dual = true
[]
[]
[AuxVariables]
[creep_strain_xx]
order = CONSTANT
family = MONOMIAL
block = '2'
[]
[creep_strain_yy]
order = CONSTANT
family = MONOMIAL
block = '2'
[]
[creep_strain_xy]
order = CONSTANT
family = MONOMIAL
block = '2'
[]
[]
[AuxKernels]
[creep_strain_xx]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xx
index_i = 0
index_j = 0
block = '2'
[]
[creep_strain_yy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_yy
index_i = 1
index_j = 1
block = '2'
[]
[creep_strain_xy]
type = RankTwoAux
rank_two_tensor = creep_strain
variable = creep_strain_xy
index_i = 0
index_j = 1
block = '2'
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Physics/SolidMechanics/Dynamic]
[all]
add_variables = true
hht_alpha = 0.0
newmark_beta = 0.25
newmark_gamma = 0.5
mass_damping_coefficient = 0.0
stiffness_damping_coefficient = 0.01
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
block = '1 2'
strain = FINITE
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[multiple_inelastic]
type = ComputeMultipleInelasticStress
inelastic_models = 'creep'
block = '2'
[]
[creep]
type = PowerLawCreepStressUpdate
coefficient = 1.0e-23 # 10e-24
n_exponent = 4
activation_energy = 0
block = '2'
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '775'
[]
[]
# User object provides the contact force (e.g. LM)
# for the application of the generalized force
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = normal_lm
lm_variable_tangential_one = frictional_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
friction_lm = frictional_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1e4
c_t = 1e4
mu = 0.5
interpolate_normals = false
newmark_beta = 0.25
newmark_gamma = 0.5
capture_tolerance = 1e-04
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 30 # 50
function = '1e-2*t' #'0.1 *sin(2 * pi / 12 * t)'
[]
[]
[Executioner]
type = Transient
end_time = 0.25
dt = 0.05
dtmin = 0.05
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err '
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
nl_max_its = 50
line_search = 'none'
snesmf_reuse_base = false
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/bouncing-block-contact/frictionless-penalty-weighted-gap.i)
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
preset = false
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[]
[UserObjects]
[weighted_gap_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
disp_x = disp_x
disp_y = disp_y
penalty = 1e0
use_physical_gap = true
[]
[]
[Constraints]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
[]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = true
abort_on_solve_fail = true
nl_rel_tol = 1e-13
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[]
(modules/contact/test/tests/sliding_block/edge_dropping/two_equal_blocks_slide_2d.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -1.0
xmax = 0.0
ymin = -0.5
ymax = 0.5
nx = 4
ny = 4
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.0
xmax = 1.0
ymin = -0.5
ymax = 0.5
nx = 5
ny = 5
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = PiecewiseLinear
x = '0 0.1 4'
y = '0 0.05 0.05'
[]
[vertical_movement]
type = PiecewiseLinear
x = '0 0.1 4'
y = '0 0 0.3'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable = normal_lm
correct_edge_dropping = true
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist nonzero 1e-10'
line_search = 'none'
dt = 0.1
dtmin = 0.01
end_time = 1.0
l_max_its = 20
nl_max_its = 20
nl_rel_tol = 1e-6
nl_abs_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
csv = true
execute_on = 'FINAL'
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = 'secondary_lower'
[]
[normal_lm]
type = ElementAverageValue
variable = normal_lm
block = 'secondary_lower'
[]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[]
(modules/contact/test/tests/pdass_problems/frictional_bouncing_block.i)
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
uniform_refine = 0 # 1,2
patch_update_strategy = always
allow_renumbering = false
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[frictional_normal_lm]
block = 3
use_dual = true
[]
[frictional_tangential_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
generate_output = 'stress_xx stress_yy'
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e3
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = frictional_normal_lm
lm_variable_tangential_one = frictional_tangential_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
friction_lm = frictional_tangential_lm
mu = 0.4
c = 1.0e1
c_t = 1.0e1
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = frictional_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = '40'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = '40'
value = 0.0
[]
[topy]
type = ADFunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 20 * t) + ${offset}'
preset = false
[]
[leftx]
type = ADFunctionDirichletBC
variable = disp_x
boundary = 30
function = '2e-2 * t'
# function = '0'
preset = false
[]
[]
[Executioner]
type = Transient
end_time = 7 # 70
dt = 0.25 # 0.1 for finer meshes (uniform_refine)
dtmin = .01
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 40
line_search = 'none'
snesmf_reuse_base = false
nl_abs_tol = 1e-9
nl_rel_tol = 1e-9
l_tol = 1e-07 # Tightening l_tol can help with friction
[]
[Debug]
show_var_residual_norms = true
[]
[VectorPostprocessors]
[cont_press]
type = NodalValueSampler
variable = frictional_normal_lm
boundary = '10'
sort_by = x
execute_on = FINAL
[]
[friction]
type = NodalValueSampler
variable = frictional_tangential_lm
boundary = '10'
sort_by = x
execute_on = FINAL
[]
[]
[Outputs]
exodus = false
[checkfile]
type = CSV
show = 'cont_press friction'
start_time = 0.0
execute_vector_postprocessors_on = FINAL
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative_nli contact cumulative_li num_l'
[num_nl]
type = NumNonlinearIterations
[]
[num_l]
type = NumLinearIterations
[]
[cumulative_nli]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[cumulative_li]
type = CumulativeValuePostprocessor
postprocessor = num_l
[]
[contact]
type = ContactDOFSetSize
variable = frictional_normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/finite-2d/finite_rr.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'finite'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Problem]
type = ReferenceResidualProblem
reference_vector = 'ref'
extra_tag_vectors = 'ref'
converge_on = 'disp_x disp_y temp'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
strain = FINITE
extra_vector_tags = 'ref'
[]
[]
[Kernels]
[hc]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
extra_vector_tags = 'ref'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceConstraint
variable = thermal_lm
secondary_variable = temp
k = 1
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
[]
[]
[BCs]
[left_temp]
type = ADDirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = ADDirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = ADDirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = ADDirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
preset = false
[]
[right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
preset = false
[]
[]
[Materials]
[plank]
type = ADComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ADComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ADComputeFiniteStrainElasticStress
block = 'plank block'
[]
[heat_plank]
type = ADHeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = ADHeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
nl_abs_tol = 1e-13
[]
[Postprocessors]
[nl_its]
type = NumNonlinearIterations
[]
[total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[]
[l_its]
type = NumLinearIterations
[]
[total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[]
[contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_secondary_subdomain
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[]
[Outputs]
file_base = ${name}
[comp]
type = CSV
show = 'contact avg_temp'
[]
[out]
type = CSV
file_base = '${name}_out'
[]
[dof]
type = DOFMap
execute_on = 'initial'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/bouncing-block-contact/frictionless-weighted-gap.i)
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
preset = false
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
preset = false
[]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = true
nl_rel_tol = 1e-12
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/mortar_dynamics/block-dynamics-reference.i)
starting_point = 2e-1
offset = -0.19
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[normal_lm]
block = 3
use_dual = true
[]
[]
[ICs]
[disp_y]
block = 2
variable = disp_y
value = '${fparse starting_point + offset}'
type = ConstantIC
[]
[]
[Kernels]
[DynamicTensorMechanics]
displacements = 'disp_x disp_y'
generate_output = 'stress_xx stress_yy'
strain = FINITE
block = '1 2'
stiffness_damping_coefficient = 1.0
hht_alpha = 0.0
[]
[inertia_x]
type = InertialForce
variable = disp_x
velocity = vel_x
acceleration = accel_x
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[inertia_y]
type = InertialForce
variable = disp_y
velocity = vel_y
acceleration = accel_y
beta = 0.25
gamma = 0.5
alpha = 0
eta = 0.0
block = '1 2'
[]
[]
[Materials]
[elasticity_2]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[elasticity_1]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.3
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1 2'
[]
[strain]
type = ComputeFiniteStrain
block = '1 2'
[]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '7750'
[]
[]
[AuxVariables]
[vel_x]
block = '1 2'
[]
[accel_x]
block = '1 2'
[]
[vel_y]
block = '1 2'
[]
[accel_y]
block = '1 2'
[]
[vel_z]
block = '1 2'
[]
[accel_z]
block = '1 2'
[]
[kinetic_energy]
order = CONSTANT
family = MONOMIAL
[]
[elastic_energy]
order = CONSTANT
family = MONOMIAL
[]
[]
[AuxKernels]
[accel_x]
type = NewmarkAccelAux
variable = accel_x
displacement = disp_x
velocity = vel_x
beta = 0.25
execute_on = 'timestep_end'
[]
[vel_x]
type = NewmarkVelAux
variable = vel_x
acceleration = accel_x
gamma = 0.5
execute_on = 'timestep_end'
[]
[accel_y]
type = NewmarkAccelAux
variable = accel_y
displacement = disp_y
velocity = vel_y
beta = 0.25
execute_on = 'timestep_end'
[]
[vel_y]
type = NewmarkVelAux
variable = vel_y
acceleration = accel_y
gamma = 0.5
execute_on = 'timestep_end'
[]
[kinetic_energy]
type = KineticEnergyAux
block = '1 2'
variable = kinetic_energy
newmark_velocity_x = vel_x
newmark_velocity_y = vel_y
newmark_velocity_z = 0.0
density = density
[]
[elastic_energy]
type = ElasticEnergyAux
variable = elastic_energy
block = '1 2'
[]
[]
# User object provides the contact force (e.g. LM)
# for the application of the generalized force
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
# Not using 'dynamic' constraints results in poor enforcement of contact
# constraints and lack of kinetic and elastic energy conservation.
[weighted_gap_lm]
type = ComputeDynamicWeightedGapLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
newmark_beta = 0.25
newmark_gamma = 0.5
use_displaced_mesh = true
# Capture tolerance is important. If too small, stabilization takes longer
capture_tolerance = 1.0e-5
c = 1.0e6
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 4 * t) + ${offset}'
[]
[leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 30 # 50
function = '0' # '1e-2*t'
[]
[]
[Executioner]
type = Transient
end_time = 0.275 # 8.0
dt = 0.025
dtmin = .025
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-15'
nl_max_its = 50
line_search = 'none'
[TimeIntegrator]
type = NewmarkBeta
beta = 0.25
gamma = 0.5
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
checkpoint = true
csv = true
[]
[Postprocessors]
active = 'contact total_kinetic_energy total_elastic_energy'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[total_kinetic_energy]
type = ElementIntegralVariablePostprocessor
variable = kinetic_energy
block = '1 2'
[]
[total_elastic_energy]
type = ElementIntegralVariablePostprocessor
variable = elastic_energy
block = '1 2'
[]
[]
(modules/contact/test/tests/cohesive_zone_model/mortar_czm_analysis.i)
[Mesh]
[msh]
type = GeneratedMeshGenerator
dim = 2
xmax = 1
ymax = 1
nx = 5
ny = 5
boundary_name_prefix = bottom
[]
[msh_id]
type = SubdomainIDGenerator
input = msh
subdomain_id = 1
[]
[msh_two]
type = GeneratedMeshGenerator
dim = 2
xmax = 1
ymin = 1
ymax = 2
nx = 5
ny = 5
boundary_name_prefix = top
boundary_id_offset = 10
[]
[msh_two_id]
type = SubdomainIDGenerator
input = msh_two
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'msh_id msh_two_id'
[]
[top_node]
type = ExtraNodesetGenerator
coord = '0 2 0'
input = combined
new_boundary = top_node
[]
[bottom_node]
type = ExtraNodesetGenerator
coord = '0 0 0'
input = top_node
new_boundary = bottom_node
[]
# Build subdomains
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = 'bottom_top'
input = bottom_node
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = 'top_bottom'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
generate_output = 'stress_yy'
[all]
strain = FINITE
add_variables = true
use_automatic_differentiation = true
decomposition_method = TaylorExpansion
block = '1 2'
[]
[]
[]
[]
[BCs]
[fix_x]
type = DirichletBC
preset = true
value = 0.0
boundary = bottom_node
variable = disp_x
[]
[lateral_top]
type = FunctionDirichletBC
boundary = top_top
variable = disp_x
function = 'if(t<=0.3,t,if(t<=0.6,0.3-(t-0.3),0.6-t))'
preset = true
[]
[top]
type = FunctionDirichletBC
boundary = top_top
variable = disp_y
function = 'if(t<=0.3,t,if(t<=0.6,0.3-(t-0.3),0.6-t))'
preset = true
[]
[bottom]
type = DirichletBC
boundary = bottom_bottom
variable = disp_y
value = 0
preset = true
[]
[]
[AuxVariables]
[mode_mixity_ratio]
[]
[damage]
[]
[local_normal_jump]
[]
[local_tangential_jump]
[]
[]
[AuxKernels]
[mode_mixity_ratio]
type = CohesiveZoneMortarUserObjectAux
variable = mode_mixity_ratio
user_object = czm_uo
cohesive_zone_quantity = mode_mixity_ratio
boundary = 'bottom_top'
[]
[cohesive_damage]
type = CohesiveZoneMortarUserObjectAux
variable = damage
user_object = czm_uo
cohesive_zone_quantity = cohesive_damage
boundary = 'bottom_top'
[]
[local_normal_jump]
type = CohesiveZoneMortarUserObjectAux
variable = local_normal_jump
user_object = czm_uo
cohesive_zone_quantity = local_normal_jump
boundary = 'bottom_top'
[]
[local_tangential_jump]
type = CohesiveZoneMortarUserObjectAux
variable = local_tangential_jump
user_object = czm_uo
cohesive_zone_quantity = local_tangential_jump
boundary = 'bottom_top'
[]
[]
[Materials]
[stress]
type = ADComputeFiniteStrainElasticStress
block = '1 2'
[]
[elasticity_tensor]
type = ADComputeElasticityTensor
fill_method = symmetric9
C_ijkl = '1.684e5 0.176e5 0.176e5 1.684e5 0.176e5 1.684e5 0.754e5 0.754e5 0.754e5'
block = '1 2'
[]
[normal_strength]
type = GenericFunctionMaterial
prop_names = 'N'
prop_values = 'if(x<0.5,1,100)*1e4'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
line_search = none
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
automatic_scaling = true
l_max_its = 2
l_tol = 1e-14
nl_max_its = 30
nl_rel_tol = 1e-10
nl_abs_tol = 1e-10
start_time = 0.0
dt = 0.0005
end_time = 0.01
dtmin = 0.0001
[]
[Outputs]
exodus = true
[]
[UserObjects]
[czm_uo]
type = BilinearMixedModeCohesiveZoneModel
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.1 # with 2.0 works
secondary_variable = disp_x
penalty = 0e6
penalty_friction = 1e4
use_physical_gap = true
correct_edge_dropping = true
normal_strength = N
shear_strength = 1e3
viscosity = 1e-3
penalty_stiffness = 1e6
mixed_mode_criterion = POWER_LAW
power_law_parameter = 2.2
GI_c = 1e3
GII_c = 1e2
displacements = 'disp_x disp_y'
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = czm_uo
correct_edge_dropping = true
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = czm_uo
correct_edge_dropping = true
[]
[c_x]
type = MortarGenericTraction
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
cohesive_zone_uo = czm_uo
correct_edge_dropping = true
[]
[c_y]
type = MortarGenericTraction
primary_boundary = 'top_bottom'
secondary_boundary = 'bottom_top'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
cohesive_zone_uo = czm_uo
correct_edge_dropping = true
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d-test-derivative-trimming.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
second_order = false
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[disp_z]
block = '1 2'
[]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[ICs]
[disp_z]
block = 1
variable = disp_z
value = '${fparse offset}'
type = ConstantIC
[]
[disp_x]
block = 1
variable = disp_x
value = 0
type = ConstantIC
[]
[disp_y]
block = 1
variable = disp_y
value = 0
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[disp_z]
type = MatDiffusion
variable = disp_z
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
c = 1.0e4
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = .5
dtmin = .01
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
l_max_its = 100
nl_max_its = 30
# nl_rel_tol = 1e-6
nl_abs_tol = 1e-12
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[num_nl]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[]
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[]
(modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[friction]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
mu = 0.4
c = 1e4
c_t = 1.0e4
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-14 1e-5'
l_max_its = 15
nl_max_its = 30
nl_rel_tol = 1e-11
nl_abs_tol = 1e-12
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[]
(modules/contact/test/tests/cohesive_zone_model/bilinear_mixed_mortar_only_czm.i)
[Mesh]
[base]
type = GeneratedMeshGenerator
dim = 2
xmax = 1.1
ymax = 1
xmin = -0.1
nx = 1
ny = 1
[]
[rename_base]
type = RenameBoundaryGenerator
input = base
old_boundary = 'top bottom left right'
new_boundary = 'top_base bottom_base left_base right_base'
[]
[base_id]
type = SubdomainIDGenerator
input = rename_base
subdomain_id = 1
[]
[top]
type = GeneratedMeshGenerator
dim = 2
xmax = 1
ymin = 1
ymax = 2
nx = 1
ny = 1
[]
[rename_top]
type = RenameBoundaryGenerator
input = top
old_boundary = 'top bottom left right'
new_boundary = '100 101 102 103'
[]
[top_id]
type = SubdomainIDGenerator
input = rename_top
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'base_id top_id'
[]
[top_node]
type = ExtraNodesetGenerator
coord = '0 2 0'
input = combined
new_boundary = top_node
[]
[bottom_node]
type = ExtraNodesetGenerator
coord = '-0.1 0 0'
input = top_node
new_boundary = bottom_node
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = 'top_base'
input = bottom_node
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '101'
new_block_name = 'primary_lower'
input = secondary
[]
patch_update_strategy = auto
patch_size = 20
allow_renumbering = false
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Physics]
[SolidMechanics]
[QuasiStatic]
generate_output = 'stress_yy'
[all]
strain = FINITE
add_variables = true
use_automatic_differentiation = true
decomposition_method = TaylorExpansion
generate_output = 'vonmises_stress'
block = '1 2'
[]
[]
[]
[]
[BCs]
[fix_x]
type = DirichletBC
preset = true
value = 0.0
boundary = bottom_node
variable = disp_x
[]
[fix_top]
type = DirichletBC
preset = true
boundary = 100
variable = disp_x
value = 0
[]
[top]
type = FunctionDirichletBC
boundary = 100
variable = disp_y
function = 'if(t<=0.3,t,if(t<=0.6,0.3-(t-0.3),0.6-t))'
preset = true
[]
[bottom]
type = DirichletBC
boundary = bottom_base
variable = disp_y
value = 0
preset = true
[]
[]
[Materials]
[normal_strength]
type = GenericConstantMaterial
prop_names = 'normal_strength'
prop_values = '1e3'
[]
[shear_strength]
type = GenericConstantMaterial
prop_names = 'shear_strength'
prop_values = '7.5e2'
[]
[stress]
type = ADComputeFiniteStrainElasticStress
block = '1 2'
[]
[elasticity_tensor]
type = ADComputeElasticityTensor
fill_method = symmetric9
C_ijkl = '1.684e5 0.176e5 0.176e5 1.684e5 0.176e5 1.684e5 0.754e5 0.754e5 0.754e5'
block = '1 2'
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
line_search = none
petsc_options_iname = '-pc_type'
petsc_options_value = 'lu'
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
l_max_its = 2
l_tol = 1e-14
nl_max_its = 150
nl_rel_tol = 1e-14
nl_abs_tol = 1e-12
start_time = 0.0
dt = 0.1
end_time = 1.0
dtmin = 0.1
[]
[Outputs]
exodus = true
[]
[UserObjects]
[czm_uo]
type = BilinearMixedModeCohesiveZoneModel
primary_boundary = 101
secondary_boundary = 'top_base'
primary_subdomain = 10000
secondary_subdomain = 10001
correct_edge_dropping = true
disp_x = disp_x
disp_y = disp_y
friction_coefficient = 0.0 # with 2.0 works
secondary_variable = disp_x
penalty = 0e6
penalty_friction = 0e4
use_physical_gap = true
# bilinear model parameters
normal_strength = 'normal_strength'
shear_strength = 'shear_strength'
penalty_stiffness = 200
power_law_parameter = 0.1
GI_c = 123
GII_c = 54
displacements = 'disp_x disp_y'
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = 101
secondary_boundary = 'top_base'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = czm_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = 101
secondary_boundary = 'top_base'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = czm_uo
[]
[c_x]
type = MortarGenericTraction
primary_boundary = 101
secondary_boundary = 'top_base'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
cohesive_zone_uo = czm_uo
[]
[c_y]
type = MortarGenericTraction
primary_boundary = 101
secondary_boundary = 'top_base'
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
cohesive_zone_uo = czm_uo
[]
[]
(modules/contact/test/tests/3d-mortar-contact/frictionless-mortar-3d_pg.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[disp_x]
block = '1 2'
[]
[disp_y]
block = '1 2'
[]
[disp_z]
block = '1 2'
[]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[aux_lm]
block = 'secondary_lower'
use_dual = false
[]
[]
[ICs]
[disp_z]
block = 1
variable = disp_z
value = '${fparse offset}'
type = ConstantIC
[]
[disp_x]
block = 1
variable = disp_x
value = 0
type = ConstantIC
[]
[disp_y]
block = 1
variable = disp_y
value = 0
type = ConstantIC
[]
[]
[Kernels]
[disp_x]
type = MatDiffusion
variable = disp_x
[]
[disp_y]
type = MatDiffusion
variable = disp_y
[]
[disp_z]
type = MatDiffusion
variable = disp_z
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
lm_variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_petrov_galerkin = true
aux_lm = aux_lm
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = 1
dt = .5
dtmin = .01
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor '
'-snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
l_max_its = 100
nl_max_its = 30
nl_abs_tol = 1e-12
line_search = 'none'
snesmf_reuse_base = false
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[lambda]
type = ElementAverageValue
variable = mortar_normal_lm
block = 'secondary_lower'
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_normal_al.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[normal_lm]
type = PenaltyMortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = PenaltyMortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'none'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 1300
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.001
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyWeightedGapUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e7
penetration_tolerance = 1e-12
use_physical_gap = true
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_coarser.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
[]
[Problem]
type = ReferenceResidualProblem
extra_tag_vectors = 'ref'
reference_vector = 'ref'
[]
[Variables]
[disp_x]
[]
[disp_y]
[]
[frictionless_normal_lm]
order = FIRST
family = LAGRANGE
block = 'secondary_lower'
use_dual = true
[]
[tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[stress_xx]
order = CONSTANT
family = MONOMIAL
[]
[stress_yy]
order = CONSTANT
family = MONOMIAL
[]
[stress_xy]
order = CONSTANT
family = MONOMIAL
[]
[saved_x]
[]
[saved_y]
[]
[diag_saved_x]
[]
[diag_saved_y]
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Kernels]
[TensorMechanics]
use_displaced_mesh = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
[]
[]
[AuxKernels]
[stress_xx]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xx
index_i = 0
index_j = 0
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[stress_yy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_yy
index_i = 1
index_j = 1
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[stress_xy]
type = RankTwoAux
rank_two_tensor = stress
variable = stress_xy
index_i = 0
index_j = 1
execute_on = timestep_end
block = '1 2 3 4 5 6 7'
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e10
poissons_ratio = 0.0
[]
[stuff1_strain]
type = ComputeFiniteStrain
block = '1'
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_strain]
type = ComputeFiniteStrain
block = '2 3 4 5 6 7'
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-15 1e-5'
line_search = 'none'
nl_abs_tol = 1e-7
start_time = 0.0
end_time = 0.3 # 3.5
l_tol = 1e-4
dt = 0.1
dtmin = 0.001
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[x_disp]
type = NodalValueSampler
variable = disp_x
boundary = '3 4'
sort_by = id
[]
[y_disp]
type = NodalValueSampler
variable = disp_y
boundary = '3 4'
sort_by = id
[]
[cont_press]
type = NodalValueSampler
variable = frictionless_normal_lm
boundary = '3'
sort_by = id
[]
[friction]
type = NodalValueSampler
variable = frictionless_normal_lm
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = false
csv = false
[console]
type = Console
max_rows = 5
[]
[chkfile]
type = CSV
show = 'x_disp y_disp cont_press friction'
file_base = cylinder_friction_check
create_final_symlink = true
execute_on = 'FINAL'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
lm_variable_normal = frictionless_normal_lm
lm_variable_tangential_one = tangential_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
friction_lm = tangential_lm
mu = 0.4
c_t = 1.0e5
c = 1.0e6
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
variable = tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
variable = tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
(modules/contact/test/tests/bouncing-block-contact/frictionless-weighted-gap-mixed-basis.i)
starting_point = 2e-1
offset = 1e-2
[GlobalParams]
displacements = 'disp_x disp_y'
diffusivity = 1e0
scaling = 1e0
[]
[Mesh]
file = long-bottom-block-1elem-blocks.e
second_order = true
patch_update_strategy = always
[]
[Variables]
[./disp_x]
block = '1 2'
order = SECOND
[../]
[./disp_y]
block = '1 2'
order = SECOND
[../]
[./normal_lm]
block = 3
[../]
[]
# [AuxVariables]
# [pid]
# order = CONSTANT
# family = MONOMIAL
# []
# []
# [AuxKernels]
# [pid]
# type = ProcessorIDAux
# variable = pid
# []
# []
[ICs]
[./disp_y]
block = 2
variable = disp_y
value = ${fparse starting_point + offset}
type = ConstantIC
[../]
[]
[Kernels]
[./disp_x]
type = MatDiffusion
variable = disp_x
[../]
[./disp_y]
type = MatDiffusion
variable = disp_y
[../]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[./weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
c = 1
weighted_gap_uo = weighted_gap_uo
[../]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[]
[BCs]
[./botx]
type = DirichletBC
variable = disp_x
boundary = 40
value = 0.0
preset = false
[../]
[./boty]
type = DirichletBC
variable = disp_y
boundary = 40
value = 0.0
preset = false
[../]
[./topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 30
function = '${starting_point} * cos(2 * pi / 40 * t) + ${offset}'
preset = false
[../]
[./leftx]
type = FunctionDirichletBC
variable = disp_x
boundary = 50
function = '1e-2 * t'
preset = false
[../]
[]
[Executioner]
type = Transient
end_time = 200
dt = 5
dtmin = .1
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -pc_svd_monitor -snes_linesearch_monitor'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu NONZERO 1e-15 1e-5'
l_max_its = 30
nl_max_its = 20
line_search = 'none'
snesmf_reuse_base = false
abort_on_solve_fail = true
nl_rel_tol = 1e-12
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[./smp]
type = SMP
full = true
[../]
[]
[Postprocessors]
active = 'num_nl cumulative contact'
[./num_nl]
type = NumNonlinearIterations
[../]
[./cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nl
[../]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = '3'
execute_on = 'nonlinear timestep_end'
[]
[]
(modules/contact/test/tests/mortar_aux_kernels/frictional-mortar-3d-status.i)
starting_point = 0.04
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[frictional_status]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[frictional_state]
type = MortarFrictionalStateAux
tangent_one = mortar_tangential_lm
boundary = 'top_bottom'
contact_pressure = mortar_normal_lm
variable = frictional_status
mu = 0.4
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 1
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
scaling = 1.0e2
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
scaling = 1.0e2
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
scaling = 1.0e2
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
add_variables = true
strain = FINITE
block = '1 2'
use_automatic_differentiation = false
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
[]
[]
[Materials]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e2
# We should try with nonzero Poisson ratio
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
secondary_variable = disp_x
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
[]
[]
[Constraints]
[friction]
type = ComputeFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
mu = 0.4
c = 1e1
c_t = 1.0e1
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
weighted_gap_uo = weighted_vel_uo
weighted_velocities_uo = weighted_vel_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = FunctionDirichletBC
variable = disp_x
boundary = 'top_top'
function = '0.16*t'
[]
[topy]
type = FunctionDirichletBC
variable = disp_y
boundary = 'top_top'
function = '0.1*t'
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 0.4 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = 0.1
dt = .02
dtmin = .02
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type -pc_factor_shift_amount -mat_mffd_err'
petsc_options_value = 'lu superlu_dist NONZERO 1e-13 1e-7'
l_max_its = 15
nl_max_its = 90
nl_rel_tol = 1e-11
nl_abs_tol = 1e-11
line_search = 'basic'
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = NONLINEAR
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = NONLINEAR
[]
[]
(modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_2d.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -1.0
xmax = 0.0
ymin = -0.5
ymax = 0.5
nx = 4
ny = 4
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.0
xmax = 1.0
ymin = -0.5
ymax = 0.5
nx = 5
ny = 5
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = PiecewiseLinear
x = '0 1.0'
y = '0 0.4'
[]
[vertical_movement]
type = PiecewiseLinear
x = '0 1.0'
y = '0 0'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
correct_edge_dropping = true
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist nonzero 1e-10'
line_search = 'none'
dt = 0.1
dtmin = 0.01
end_time = 1.0
l_max_its = 20
nl_max_its = 20
nl_rel_tol = 1e-8
nl_abs_tol = 1e-10
[]
[Outputs]
csv = true
execute_on = 'FINAL'
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = 'secondary_lower'
[]
[normal_lm]
type = ElementAverageValue
variable = normal_lm
block = 'secondary_lower'
[]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[]
(modules/contact/test/tests/pdass_problems/cylinder_friction_penalty_frictional_al.i)
[GlobalParams]
volumetric_locking_correction = true
displacements = 'disp_x disp_y'
[]
[Mesh]
[input_file]
type = FileMeshGenerator
file = hertz_cyl_finer.e
[]
[secondary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10001
new_block_name = 'secondary_lower'
sidesets = '3'
input = input_file
[]
[primary]
type = LowerDBlockFromSidesetGenerator
new_block_id = 10000
sidesets = '2'
new_block_name = 'primary_lower'
input = secondary
[]
allow_renumbering = false
[]
[Problem]
type = AugmentedLagrangianContactFEProblem
extra_tag_vectors = 'ref'
[]
[AuxVariables]
[penalty_normal_pressure]
[]
[penalty_frictional_pressure]
[]
[accumulated_slip_one]
[]
[tangential_vel_one]
[]
[normal_gap]
[]
[normal_lm]
[]
[saved_x]
[]
[saved_y]
[]
[active]
[]
[dual_var]
use_dual = true
block = '10001'
[]
[]
[Functions]
[disp_ramp_vert]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. -0.020 -0.020'
[]
[disp_ramp_horz]
type = PiecewiseLinear
x = '0. 1. 3.5'
y = '0. 0.0 0.015'
[]
[]
[Physics/SolidMechanics/QuasiStatic/all]
strain = FINITE
add_variables = true
save_in = 'saved_x saved_y'
extra_vector_tags = 'ref'
block = '1 2 3 4 5 6 7'
generate_output = 'stress_xx stress_yy stress_xy'
[]
[AuxKernels]
[penalty_normal_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_normal_pressure
user_object = friction_uo
contact_quantity = normal_pressure
boundary = 3
[]
[penalty_frictional_pressure]
type = PenaltyMortarUserObjectAux
variable = penalty_frictional_pressure
user_object = friction_uo
contact_quantity = tangential_pressure_one
boundary = 3
[]
[penalty_tangential_vel_one]
type = PenaltyMortarUserObjectAux
variable = tangential_vel_one
user_object = friction_uo
contact_quantity = tangential_velocity_one
boundary = 3
[]
[penalty_accumulated_slip_one]
type = PenaltyMortarUserObjectAux
variable = accumulated_slip_one
user_object = friction_uo
contact_quantity = accumulated_slip_one
boundary = 3
[]
[normal_lm]
type = PenaltyMortarUserObjectAux
variable = normal_lm
user_object = friction_uo
contact_quantity = normal_lm
boundary = 3
[]
[normal_gap]
type = PenaltyMortarUserObjectAux
variable = normal_gap
user_object = friction_uo
contact_quantity = normal_gap
boundary = 3
[]
[]
[Postprocessors]
[bot_react_x]
type = NodalSum
variable = saved_x
boundary = 1
[]
[bot_react_y]
type = NodalSum
variable = saved_y
boundary = 1
[]
[top_react_x]
type = NodalSum
variable = saved_x
boundary = 4
[]
[top_react_y]
type = NodalSum
variable = saved_y
boundary = 4
[]
[_dt]
type = TimestepSize
[]
[num_lin_it]
type = NumLinearIterations
[]
[num_nonlin_it]
type = NumNonlinearIterations
[]
[cumulative]
type = CumulativeValuePostprocessor
postprocessor = num_nonlin_it
[]
[gap]
type = SideExtremeValue
value_type = min
variable = normal_gap
boundary = 3
[]
[num_al]
type = NumAugmentedLagrangeIterations
[]
[active_set_size]
type = NodalSum
variable = active
[]
[]
[BCs]
[side_x]
type = DirichletBC
variable = disp_y
boundary = '1 2'
value = 0.0
[]
[bot_y]
type = DirichletBC
variable = disp_x
boundary = '1 2'
value = 0.0
[]
[top_y_disp]
type = FunctionDirichletBC
variable = disp_y
boundary = 4
function = disp_ramp_vert
[]
[top_x_disp]
type = FunctionDirichletBC
variable = disp_x
boundary = 4
function = disp_ramp_horz
[]
[]
[Materials]
[stuff1_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1e8
poissons_ratio = 0.0
[]
[stuff1_stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[stuff2_elas_tens]
type = ComputeIsotropicElasticityTensor
block = '2 3 4 5 6 7'
youngs_modulus = 1e6
poissons_ratio = 0.3
[]
[stuff2_stress]
type = ComputeFiniteStrainElasticStress
block = '2 3 4 5 6 7'
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_ksp_ew'
petsc_options_iname = -pc_type
petsc_options_value = lu
line_search = 'basic'
nl_abs_tol = 1e-10
nl_rel_tol = 1e-8
nl_max_its = 50
l_tol = 1e-05
l_abs_tol = 1e-13
start_time = 0.0
end_time = 0.2 # 3.5
dt = 0.1
dtmin = 0.1
[Predictor]
type = SimplePredictor
scale = 1.0
[]
automatic_scaling = true
compute_scaling_once = false
off_diagonals_in_auto_scaling = true
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[VectorPostprocessors]
[surface]
type = NodalValueSampler
use_displaced_mesh = false
variable = 'disp_x disp_y penalty_normal_pressure penalty_frictional_pressure normal_gap'
boundary = '3'
sort_by = id
[]
[]
[Outputs]
print_linear_residuals = true
perf_graph = true
exodus = true
csv = false
[vectorpp_output]
type = CSV
create_final_symlink = true
execute_on = 'INITIAL TIMESTEP_END FINAL'
[]
[]
[UserObjects]
[friction_uo]
type = PenaltyFrictionUserObject
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
disp_x = disp_x
disp_y = disp_y
penalty = 1e5
penalty_friction = 1e8
secondary_variable = disp_x
friction_coefficient = 0.4
penetration_tolerance = 1e-7
# Not solving the frictional problem tightly (below)
slip_tolerance = 1 # 1e-6
penalty_multiplier = 100
penalty_multiplier_friction = 1
use_physical_gap = true
aux_lm = dual_var
[]
[]
[Constraints]
[x]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[y]
type = NormalMortarMechanicalContact
primary_boundary = '2'
secondary_boundary = '3'
primary_subdomain = '10000'
secondary_subdomain = '10001'
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = friction_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 2
secondary_boundary = 3
primary_subdomain = 10000
secondary_subdomain = 10001
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = friction_uo
[]
[]
(modules/contact/test/tests/mortar_dynamics/frictional-mortar-3d-dynamics.i)
starting_point = 0.25
offset = 0.00
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[AuxVariables]
[mortar_tangent_x]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_y]
family = LAGRANGE
order = FIRST
[]
[mortar_tangent_z]
family = LAGRANGE
order = FIRST
[]
[]
[AuxKernels]
[friction_x_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_x
component = 0
boundary = 'top_bottom'
[]
[friction_y_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_y
component = 1
boundary = 'top_bottom'
[]
[friction_z_component]
type = MortarFrictionalPressureVectorAux
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
tangent_one = mortar_tangential_lm
tangent_two = mortar_tangential_3d_lm
variable = mortar_tangent_z
component = 2
boundary = 'top_bottom'
[]
[]
[Mesh]
[top_block]
type = GeneratedMeshGenerator
dim = 3
nx = 3
ny = 3
nz = 3
xmin = -0.25
xmax = 0.25
ymin = -0.25
ymax = 0.25
zmin = -0.25
zmax = 0.25
elem_type = HEX8
[]
[rotate_top_block]
type = TransformGenerator
input = top_block
transform = ROTATE
vector_value = '0 0 0'
[]
[top_block_sidesets]
type = RenameBoundaryGenerator
input = rotate_top_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'top_bottom top_back top_right top_front top_left top_top'
[]
[top_block_id]
type = SubdomainIDGenerator
input = top_block_sidesets
subdomain_id = 1
[]
[bottom_block]
type = GeneratedMeshGenerator
dim = 3
nx = 10
ny = 10
nz = 2
xmin = -.5
xmax = .5
ymin = -.5
ymax = .5
zmin = -.3
zmax = -.25
elem_type = HEX8
[]
[bottom_block_id]
type = SubdomainIDGenerator
input = bottom_block
subdomain_id = 2
[]
[bottom_block_change_boundary_id]
type = RenameBoundaryGenerator
input = bottom_block_id
old_boundary = '0 1 2 3 4 5'
new_boundary = '100 101 102 103 104 105'
[]
[combined]
type = MeshCollectionGenerator
inputs = 'top_block_id bottom_block_change_boundary_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'top_block bottom_block'
[]
[bottom_right_sideset]
type = SideSetsAroundSubdomainGenerator
input = block_rename
new_boundary = bottom_right
block = bottom_block
normal = '1 0 0'
[]
[bottom_left_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_right_sideset
new_boundary = bottom_left
block = bottom_block
normal = '-1 0 0'
[]
[bottom_top_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_left_sideset
new_boundary = bottom_top
block = bottom_block
normal = '0 0 1'
[]
[bottom_bottom_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_top_sideset
new_boundary = bottom_bottom
block = bottom_block
normal = '0 0 -1'
[]
[bottom_front_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_bottom_sideset
new_boundary = bottom_front
block = bottom_block
normal = '0 1 0'
[]
[bottom_back_sideset]
type = SideSetsAroundSubdomainGenerator
input = bottom_front_sideset
new_boundary = bottom_back
block = bottom_block
normal = '0 -1 0'
[]
[secondary]
input = bottom_back_sideset
type = LowerDBlockFromSidesetGenerator
sidesets = 'top_bottom' # top_back top_left'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'bottom_top'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
uniform_refine = 0
allow_renumbering = false
[]
[Variables]
[mortar_normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_lm]
block = 'secondary_lower'
use_dual = true
[]
[mortar_tangential_3d_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[Physics/SolidMechanics/Dynamic]
[all]
add_variables = true
hht_alpha = 0.0
newmark_beta = 0.25
newmark_gamma = 0.5
mass_damping_coefficient = 0.0
stiffness_damping_coefficient = 0.1
displacements = 'disp_x disp_y disp_z'
generate_output = 'stress_xx stress_xy stress_xz stress_yy stress_zz'
block = '1 2'
strain = FINITE
density = density
[]
[]
[Materials]
[density]
type = GenericConstantMaterial
block = '1 2'
prop_names = 'density'
prop_values = '1.0'
[]
[tensor]
type = ComputeIsotropicElasticityTensor
block = '1'
youngs_modulus = 1.0e4
poissons_ratio = 0.0
[]
[stress]
type = ComputeFiniteStrainElasticStress
block = '1'
[]
[tensor_1000]
type = ComputeIsotropicElasticityTensor
block = '2'
youngs_modulus = 1e5
poissons_ratio = 0.0
[]
[stress_1000]
type = ComputeFiniteStrainElasticStress
block = '2'
[]
[]
[UserObjects]
[weighted_vel_uo]
type = LMWeightedVelocitiesUserObject
primary_boundary = 20
secondary_boundary = 10
primary_subdomain = 4
secondary_subdomain = 3
lm_variable_normal = mortar_normal_lm
lm_variable_tangential_one = mortar_tangential_lm
lm_variable_tangential_two = mortar_tangential_3d_lm
secondary_variable = disp_x
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[friction]
type = ComputeDynamicFrictionalForceLMMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
friction_lm = mortar_tangential_lm
friction_lm_dir = mortar_tangential_3d_lm
mu = 0.4
c = 1e4
c_t = 1.0e4
newmark_gamma = 0.5
newmark_beta = 0.25
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_vel_uo
[]
[tangential_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_x]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_x
component = x
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_y]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_y
component = y
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[tangential_dir_z]
type = TangentialMortarMechanicalContact
primary_boundary = 'bottom_top'
secondary_boundary = 'top_bottom'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = mortar_tangential_3d_lm
secondary_variable = disp_z
component = z
direction = direction_2
use_displaced_mesh = true
compute_lm_residuals = false
weighted_velocities_uo = weighted_vel_uo
[]
[]
[BCs]
[botx]
type = DirichletBC
variable = disp_x
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[boty]
type = DirichletBC
variable = disp_y
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[botz]
type = DirichletBC
variable = disp_z
boundary = 'bottom_left bottom_right bottom_front bottom_back'
value = 0.0
[]
[topx]
type = DirichletBC
variable = disp_x
boundary = 'top_top'
value = 0.0
[]
[topy]
type = DirichletBC
variable = disp_y
boundary = 'top_top'
value = 0.0
[]
[topz]
type = FunctionDirichletBC
variable = disp_z
boundary = 'top_top'
function = '-${starting_point} * sin(2 * pi / 40 * t) + ${offset}'
[]
[]
[Executioner]
type = Transient
end_time = .025
dt = .025
dtmin = .001
solve_type = 'PJFNK'
petsc_options = '-snes_converged_reason -ksp_converged_reason -snes_ksp_ew'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount'
petsc_options_value = 'lu NONZERO 1e-14'
nl_rel_tol = 1e-11
nl_abs_tol = 1e-11
line_search = 'basic'
[TimeIntegrator]
type = NewmarkBeta
gamma = 0.5
beta = 0.25
[]
[]
[Debug]
show_var_residual_norms = true
[]
[Outputs]
exodus = true
csv = true
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Postprocessors]
active = 'contact'
[contact]
type = ContactDOFSetSize
variable = mortar_normal_lm
subdomain = 'secondary_lower'
execute_on = 'nonlinear timestep_end'
[]
[]
[VectorPostprocessors]
[contact-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_normal_lm
sort_by = 'id'
execute_on = NONLINEAR
[]
[frictional-pressure]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[frictional-pressure-3d]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangential_3d_lm
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_x]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_x
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[tangent_y]
type = NodalValueSampler
block = secondary_lower
variable = mortar_tangent_y
sort_by = 'id'
execute_on = TIMESTEP_END
[]
[]
(modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_2d_pg.i)
[GlobalParams]
displacements = 'disp_x disp_y'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 2
xmin = -1.0
xmax = 0.0
ymin = -0.5
ymax = 0.5
nx = 4
ny = 4
elem_type = QUAD4
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3'
new_boundary = '10 11 12 13'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.0
xmax = 1.0
ymin = -0.5
ymax = 0.5
nx = 5
ny = 5
elem_type = QUAD4
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3'
new_boundary = '20 21 22 23'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = '11'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = '23'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[aux_lm]
block = 'secondary_lower'
use_dual = false
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = PiecewiseLinear
x = '0 1.0'
y = '0 0.4'
[]
[vertical_movement]
type = PiecewiseLinear
x = '0 1.0'
y = '0 0'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 13
function = horizontal_movement
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 21
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 21
value = 0.0
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 13
function = vertical_movement
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
correct_edge_dropping = true
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_petrov_galerkin = true
aux_lm = aux_lm
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist nonzero 1e-10'
line_search = 'none'
dt = 0.1
dtmin = 0.01
end_time = 1.0
l_max_its = 20
nl_max_its = 20
nl_rel_tol = 1e-8
nl_abs_tol = 1e-10
[]
[Outputs]
csv = true
execute_on = 'FINAL'
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = 'secondary_lower'
[]
[normal_lm]
type = ElementAverageValue
variable = normal_lm
block = 'secondary_lower'
[]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[]
(modules/combined/test/tests/gap_heat_transfer_mortar/small-2d/small.i)
E_block = 1e7
E_plank = 1e7
elem = QUAD4
order = FIRST
name = 'small'
[Mesh]
patch_size = 80
patch_update_strategy = auto
[plank]
type = GeneratedMeshGenerator
dim = 2
xmin = -0.3
xmax = 0.3
ymin = -10
ymax = 10
nx = 2
ny = 67
elem_type = ${elem}
boundary_name_prefix = plank
[]
[plank_id]
type = SubdomainIDGenerator
input = plank
subdomain_id = 1
[]
[block]
type = GeneratedMeshGenerator
dim = 2
xmin = 0.31
xmax = 0.91
ymin = 7.7
ymax = 8.5
nx = 3
ny = 4
elem_type = ${elem}
boundary_name_prefix = block
boundary_id_offset = 10
[]
[block_id]
type = SubdomainIDGenerator
input = block
subdomain_id = 2
[]
[combined]
type = MeshCollectionGenerator
inputs = 'plank_id block_id'
[]
[block_rename]
type = RenameBlockGenerator
input = combined
old_block = '1 2'
new_block = 'plank block'
[]
[secondary]
input = block_rename
type = LowerDBlockFromSidesetGenerator
sidesets = 'block_left'
new_block_id = '30'
new_block_name = 'frictionless_secondary_subdomain'
[]
[primary]
input = secondary
type = LowerDBlockFromSidesetGenerator
sidesets = 'plank_right'
new_block_id = '20'
new_block_name = 'frictionless_primary_subdomain'
[]
[]
[GlobalParams]
displacements = 'disp_x disp_y'
[]
[Variables]
[disp_x]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[disp_y]
order = ${order}
block = 'plank block'
scaling = ${fparse 2.0 / (E_plank + E_block)}
[]
[temp]
order = ${order}
block = 'plank block'
scaling = 1e-1
[]
[thermal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
scaling = 1e-7
[]
[frictionless_normal_lm]
order = ${order}
block = 'frictionless_secondary_subdomain'
use_dual = true
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[action]
generate_output = 'stress_xx stress_yy stress_zz vonmises_stress hydrostatic_stress strain_xx strain_yy strain_zz'
block = 'plank block'
use_automatic_differentiation = true
[]
[]
[Kernels]
[hc]
type = ADHeatConduction
variable = temp
use_displaced_mesh = true
block = 'plank block'
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
lm_variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
[]
[]
[Constraints]
[weighted_gap_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
disp_x = disp_x
disp_y = disp_y
use_displaced_mesh = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = plank_right
secondary_boundary = block_left
primary_subdomain = frictionless_primary_subdomain
secondary_subdomain = frictionless_secondary_subdomain
variable = frictionless_normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
weighted_gap_uo = weighted_gap_uo
[]
[thermal_contact]
type = GapConductanceConstraint
variable = thermal_lm
secondary_variable = temp
k = 1
use_displaced_mesh = true
primary_boundary = plank_right
primary_subdomain = frictionless_primary_subdomain
secondary_boundary = block_left
secondary_subdomain = frictionless_secondary_subdomain
displacements = 'disp_x disp_y'
[]
[]
[BCs]
[left_temp]
type = DirichletBC
variable = temp
boundary = 'plank_left'
value = 400
[]
[right_temp]
type = DirichletBC
variable = temp
boundary = 'block_right'
value = 300
[]
[left_x]
type = DirichletBC
variable = disp_x
boundary = plank_left
value = 0.0
[]
[left_y]
type = DirichletBC
variable = disp_y
boundary = plank_bottom
value = 0.0
[]
[right_x]
type = ADFunctionDirichletBC
variable = disp_x
boundary = block_right
function = '-0.04*sin(4*(t+1.5))+0.02'
[]
[right_y]
type = ADFunctionDirichletBC
variable = disp_y
boundary = block_right
function = '-t'
[]
[]
[Materials]
[plank]
type = ADComputeIsotropicElasticityTensor
block = 'plank'
poissons_ratio = 0.3
youngs_modulus = ${E_plank}
[]
[block]
type = ADComputeIsotropicElasticityTensor
block = 'block'
poissons_ratio = 0.3
youngs_modulus = ${E_block}
[]
[stress]
type = ADComputeLinearElasticStress
block = 'plank block'
[]
[heat_plank]
type = ADHeatConductionMaterial
block = plank
thermal_conductivity = 2
specific_heat = 1
[]
[heat_block]
type = ADHeatConductionMaterial
block = block
thermal_conductivity = 1
specific_heat = 1
[]
[]
[Preconditioning]
[smp]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'NEWTON'
petsc_options = '-snes_converged_reason -ksp_converged_reason'
petsc_options_iname = '-pc_type -pc_factor_shift_type -pc_factor_shift_amount -snes_max_it'
petsc_options_value = 'lu NONZERO 1e-15 20'
end_time = 13.5
dt = 0.1
dtmin = 0.1
timestep_tolerance = 1e-6
line_search = 'none'
[]
[Postprocessors]
[nl_its]
type = NumNonlinearIterations
[]
[total_nl_its]
type = CumulativeValuePostprocessor
postprocessor = nl_its
[]
[l_its]
type = NumLinearIterations
[]
[total_l_its]
type = CumulativeValuePostprocessor
postprocessor = l_its
[]
[contact]
type = ContactDOFSetSize
variable = frictionless_normal_lm
subdomain = frictionless_secondary_subdomain
[]
[avg_hydro]
type = ElementAverageValue
variable = hydrostatic_stress
block = 'block'
[]
[avg_temp]
type = ElementAverageValue
variable = temp
block = 'block'
[]
[max_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
[]
[min_hydro]
type = ElementExtremeValue
variable = hydrostatic_stress
block = 'block'
value_type = min
[]
[avg_vonmises]
type = ElementAverageValue
variable = vonmises_stress
block = 'block'
[]
[max_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
[]
[min_vonmises]
type = ElementExtremeValue
variable = vonmises_stress
block = 'block'
value_type = min
[]
[]
[Outputs]
file_base = ${name}
[comp]
type = CSV
show = 'contact avg_temp'
[]
[out]
type = CSV
file_base = '${name}_out'
[]
[]
[Debug]
show_var_residual_norms = true
[]
(modules/contact/test/tests/simple_contact/two_block_compress/two_equal_blocks_compress_3d_pg.i)
[GlobalParams]
displacements = 'disp_x disp_y disp_z'
volumetric_locking_correction = true
[]
[Mesh]
[left_block]
type = GeneratedMeshGenerator
dim = 3
nx = 1
ny = 1
nz = 1
xmin = -1.0
xmax = 0.0
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX8
[]
[left_block_sidesets]
type = RenameBoundaryGenerator
input = left_block
old_boundary = '0 1 2 3 4 5'
new_boundary = 'left_bottom left_back left_right left_front left_left left_top'
[]
[left_block_id]
type = SubdomainIDGenerator
input = left_block_sidesets
subdomain_id = 1
[]
[right_block]
type = GeneratedMeshGenerator
dim = 3
nx = 2
ny = 2
nz = 2
xmin = 0.0
xmax = 1.0
ymin = -0.5
ymax = 0.5
zmin = -0.5
zmax = 0.5
elem_type = HEX8
[]
[right_block_sidesets]
type = RenameBoundaryGenerator
input = right_block
old_boundary = '0 1 2 3 4 5'
# new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
new_boundary = '100 101 102 103 104 105'
[]
[right_block_sidesets_rename]
type = RenameBoundaryGenerator
input = right_block_sidesets
old_boundary = '100 101 102 103 104 105'
new_boundary = 'right_bottom right_back right_right right_front right_left right_top'
[]
[right_block_id]
type = SubdomainIDGenerator
input = right_block_sidesets_rename
subdomain_id = 2
[]
[combined_mesh]
type = MeshCollectionGenerator
inputs = 'left_block_id right_block_id'
[]
[left_lower]
type = LowerDBlockFromSidesetGenerator
input = combined_mesh
sidesets = 'left_right'
new_block_id = '10001'
new_block_name = 'secondary_lower'
[]
[right_lower]
type = LowerDBlockFromSidesetGenerator
input = left_lower
sidesets = 'right_left'
new_block_id = '10000'
new_block_name = 'primary_lower'
[]
[]
[Variables]
[normal_lm]
block = 'secondary_lower'
use_dual = true
[]
[]
[AuxVariables]
[aux_lm]
block = 'secondary_lower'
use_dual = false
[]
[]
[Physics/SolidMechanics/QuasiStatic]
[all]
strain = FINITE
incremental = true
add_variables = true
block = '1 2'
[]
[]
[Functions]
[horizontal_movement]
type = PiecewiseLinear
x = '0 0.5'
y = '0 0.2'
[]
[vertical_movement]
type = PiecewiseLinear
x = '0 1.0'
y = '0 0'
[]
[]
[BCs]
[push_left_x]
type = FunctionDirichletBC
variable = disp_x
boundary = 'left_left'
function = horizontal_movement
[]
[push_left_y]
type = FunctionDirichletBC
variable = disp_y
boundary = 'left_left'
function = vertical_movement
[]
[fix_left_z]
type = DirichletBC
variable = disp_z
boundary = 'left_left'
value = 0.0
[]
[fix_right_x]
type = DirichletBC
variable = disp_x
boundary = 'right_right'
value = 0.0
[]
[fix_right_y]
type = DirichletBC
variable = disp_y
boundary = 'right_right'
value = 0.0
[]
[fix_right_z]
type = DirichletBC
variable = disp_z
boundary = 'right_right'
value = 0.0
[]
[]
[Materials]
[elasticity_tensor_left]
type = ComputeIsotropicElasticityTensor
block = 1
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_left]
type = ComputeFiniteStrainElasticStress
block = 1
[]
[elasticity_tensor_right]
type = ComputeIsotropicElasticityTensor
block = 2
youngs_modulus = 1.0e6
poissons_ratio = 0.3
[]
[stress_right]
type = ComputeFiniteStrainElasticStress
block = 2
[]
[]
[UserObjects]
[weighted_gap_uo]
type = LMWeightedGapUserObject
primary_boundary = '23'
secondary_boundary = '11'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
correct_edge_dropping = true
lm_variable = normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_petrov_galerkin = true
aux_lm = aux_lm
[]
[]
[Constraints]
[normal_lm]
type = ComputeWeightedGapLMMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
disp_x = disp_x
disp_y = disp_y
disp_z = disp_z
use_displaced_mesh = true
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_x]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_x
component = x
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_y]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_y
component = y
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[normal_z]
type = NormalMortarMechanicalContact
primary_boundary = 'right_left'
secondary_boundary = 'left_right'
primary_subdomain = 'primary_lower'
secondary_subdomain = 'secondary_lower'
variable = normal_lm
secondary_variable = disp_z
component = z
use_displaced_mesh = true
compute_lm_residuals = false
correct_edge_dropping = true
weighted_gap_uo = weighted_gap_uo
[]
[]
[Preconditioning]
[SMP]
type = SMP
full = true
[]
[]
[Executioner]
type = Transient
solve_type = 'PJFNK'
petsc_options_iname = '-pc_type -pc_factor_mat_solver_type -pc_factor_shift_type '
'-pc_factor_shift_amount'
petsc_options_value = 'lu superlu_dist nonzero 1e-10'
line_search = 'none'
dt = 0.1
dtmin = 0.01
end_time = 0.4
l_max_its = 20
nl_max_its = 20
nl_rel_tol = 1e-6
nl_abs_tol = 1e-8
snesmf_reuse_base = false
[]
[Outputs]
csv = true
execute_on = 'FINAL'
[]
[Postprocessors]
[contact]
type = ContactDOFSetSize
variable = normal_lm
subdomain = 'secondary_lower'
[]
[normal_lm]
type = ElementAverageValue
variable = normal_lm
block = 'secondary_lower'
[]
[avg_disp_x]
type = ElementAverageValue
variable = disp_x
block = '1 2'
[]
[avg_disp_y]
type = ElementAverageValue
variable = disp_y
block = '1 2'
[]
[max_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
[]
[max_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
[]
[min_disp_x]
type = ElementExtremeValue
variable = disp_x
block = '1 2'
value_type = min
[]
[min_disp_y]
type = ElementExtremeValue
variable = disp_y
block = '1 2'
value_type = min
[]
[]