MFEMDiffusionKernel

Summary

Adds the domain integrator to an MFEM problem for the bilinear form arising from the weak form of the Laplacian operator .

Overview

Adds the domain integrator for integrating the bilinear form

where and is a scalar diffusivity coefficient.

This term arises from the weak form of the Laplacian operator

Example Input File Syntax

[Kernels<<<{"href": "../../../syntax/Kernels/index.html"}>>>]
  [diff]
    type = MFEMDiffusionKernel<<<{"description": "Adds the domain integrator to an MFEM problem for the bilinear form $(k\\vec\\nabla u, \\vec\\nabla v)_\\Omega$ arising from the weak form of the Laplacian operator $- \\vec\\nabla \\cdot \\left( k \\vec \\nabla u \\right)$.", "href": "MFEMDiffusionKernel.html"}>>>
    variable<<<{"description": "Variable labelling the weak form this kernel is added to"}>>> = concentration
  []
[]
(test/tests/mfem/kernels/diffusion.i)

Input Parameters

  • blockThe list of subdomains (names or ids) that this object will be restricted to. Leave empty to apply to all subdomains.

    C++ Type:std::vector<SubdomainName>

    Controllable:No

    Description:The list of subdomains (names or ids) that this object will be restricted to. Leave empty to apply to all subdomains.

  • coefficient1.Name of property for diffusion coefficient k. A functor is any of the following: a variable, an MFEM material property, a function, a postprocessor or a number.

    Default:1.

    C++ Type:MFEMScalarCoefficientName

    Controllable:No

    Description:Name of property for diffusion coefficient k. A functor is any of the following: a variable, an MFEM material property, a function, a postprocessor or a number.

  • variableVariable labelling the weak form this kernel is added to

    C++ Type:VariableName

    Unit:(no unit assumed)

    Controllable:No

    Description:Variable labelling the weak form this kernel is added to

Optional Parameters

  • allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

    Default:False

    C++ Type:bool

    Controllable:No

    Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).

  • execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.

    Default:TIMESTEP_END

    C++ Type:ExecFlagEnum

    Options:XFEM_MARK, FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, LINEAR_CONVERGENCE, NONLINEAR, NONLINEAR_CONVERGENCE, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, MULTIAPP_FIXED_POINT_CONVERGENCE, FINAL, CUSTOM, TRANSFER

    Controllable:No

    Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.

  • execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.

    Default:0

    C++ Type:int

    Controllable:No

    Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.

  • force_postauxFalseForces the UserObject to be executed in POSTAUX

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Forces the UserObject to be executed in POSTAUX

  • force_preauxFalseForces the UserObject to be executed in PREAUX

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Forces the UserObject to be executed in PREAUX

  • force_preicFalseForces the UserObject to be executed in PREIC during initial setup

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Forces the UserObject to be executed in PREIC during initial setup

Execution Scheduling Parameters

  • control_tagsAdds user-defined labels for accessing object parameters via control logic.

    C++ Type:std::vector<std::string>

    Controllable:No

    Description:Adds user-defined labels for accessing object parameters via control logic.

  • enableTrueSet the enabled status of the MooseObject.

    Default:True

    C++ Type:bool

    Controllable:Yes

    Description:Set the enabled status of the MooseObject.

  • use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

  • prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

    C++ Type:MaterialPropertyName

    Unit:(no unit assumed)

    Controllable:No

    Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.

  • use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

    Default:False

    C++ Type:bool

    Controllable:No

    Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.

Material Property Retrieval Parameters

Input Files