NSFVMixtureFunctorMaterial

Compute the arithmetic mean of material properties using a phase fraction.

This material is mainly used in multiphase modeling. Given a phase fraction functor "phase_1_fraction" ( $var element = document.getElementById("moose-equation-ff39fcbf-29a6-4d74-80a1-2b5a93d86da8");katex.render("\\lambda_1", element, {displayMode:false,throwOnError:false,macros:{"\\eqc":"\\,,","\\eqp":"\\,.","\\pd":"\\frac{\\partial #1}{\\partial #2}","\\pr":"\\left(#1\\right)","\\ddt":"\\frac{d #1}{d t}"}});$ ) and two vectors of (functor) properties "phase_1_names" and "phase_2_names", named generically $var element = document.getElementById("moose-equation-a9996dfd-45a8-4614-96e7-8f4258d24e7c");katex.render("p_{i,1}", element, {displayMode:false,throwOnError:false,macros:{"\\eqc":"\\,,","\\eqp":"\\,.","\\pd":"\\frac{\\partial #1}{\\partial #2}","\\pr":"\\left(#1\\right)","\\ddt":"\\frac{d #1}{d t}"}});$ and $var element = document.getElementById("moose-equation-d4c94438-eaa3-4cbf-b837-3c7fde26239e");katex.render("p_{i,2}", element, {displayMode:false,throwOnError:false,macros:{"\\eqc":"\\,,","\\eqp":"\\,.","\\pd":"\\frac{\\partial #1}{\\partial #2}","\\pr":"\\left(#1\\right)","\\ddt":"\\frac{d #1}{d t}"}});$ , respectively, the material computes the phase-weighted average of the property as follows:

$var element = document.getElementById("moose-equation-6942cf1c-d09e-4260-9ff3-0df69e797e0d");katex.render("p_i = \\lambda_1 p_{i,1} + (1 - \\lambda_1) p_{i,2} \\,,", element, {displayMode:true,throwOnError:false,macros:{"\\eqc":"\\,,","\\eqp":"\\,.","\\pd":"\\frac{\\partial #1}{\\partial #2}","\\pr":"\\left(#1\\right)","\\ddt":"\\frac{d #1}{d t}"}});$

where we assume that $var element = document.getElementById("moose-equation-5cfb0bae-f3f2-4dcf-a02c-651a1b897c74");katex.render("\\lambda_2 = 1 - \\lambda_1", element, {displayMode:false,throwOnError:false,macros:{"\\eqc":"\\,,","\\eqp":"\\,.","\\pd":"\\frac{\\partial #1}{\\partial #2}","\\pr":"\\left(#1\\right)","\\ddt":"\\frac{d #1}{d t}"}});$ . The name of the output properties can be defined using the "prop_names" parameter.

Input Parameters

phase_1_fractionPhase 1 fraction. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:Phase 1 fraction. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
phase_1_namesThe names of the properties for phase 1. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:std::vector<MooseFunctorName>
Unit:(no unit assumed)
Controllable:No
Description:The names of the properties for phase 1. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
phase_2_namesThe names of the properties for phase 2. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:std::vector<MooseFunctorName>
Unit:(no unit assumed)
Controllable:No
Description:The names of the properties for phase 2. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
prop_namesThe name of the mixture properties output from the material. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.
C++ Type:std::vector<MooseFunctorName>
Unit:(no unit assumed)
Controllable:No
Description:The name of the mixture properties output from the material. A functor is any of the following: a variable, a functor material property, a function, a postprocessor or a number.

Required Parameters

blockThe list of blocks (ids or names) that this object will be applied
C++ Type:std::vector<SubdomainName>
Controllable:No
Description:The list of blocks (ids or names) that this object will be applied
declare_suffixAn optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any declared properties. The suffix will be prepended with a '_' character.
execute_onALWAYSThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:ALWAYS
C++ Type:ExecFlagEnum
Options:XFEM_MARK, FORWARD, ADJOINT, HOMOGENEOUS_FORWARD, ADJOINT_TIMESTEP_BEGIN, ADJOINT_TIMESTEP_END, NONE, INITIAL, LINEAR, LINEAR_CONVERGENCE, NONLINEAR, NONLINEAR_CONVERGENCE, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, MULTIAPP_FIXED_POINT_CONVERGENCE, FINAL, CUSTOM, ALWAYS
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
limit_phase_fractionFalseWhether to bound the phase fraction between 0 and 1
Default:False
C++ Type:bool
Controllable:No
Description:Whether to bound the phase fraction between 0 and 1

Optional Parameters

control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Controllable:Yes
Description:Set the enabled status of the MooseObject.
implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
seed0The seed for the master random number generator
Default:0
C++ Type:unsigned int
Controllable:No
Description:The seed for the master random number generator

Advanced Parameters

output_propertiesList of material properties, from this material, to output (outputs must also be defined to an output type)
C++ Type:std::vector<std::string>
Controllable:No
Description:List of material properties, from this material, to output (outputs must also be defined to an output type)
outputsnone Vector of output names where you would like to restrict the output of variables(s) associated with this object
Default:none
C++ Type:std::vector<OutputName>
Controllable:No
Description:Vector of output names where you would like to restrict the output of variables(s) associated with this object

Outputs Parameters

Input Files

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_interface_area_model/turbulent_driven_growth.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-drift-flux.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_interface_area_model/pressure_driven_growth_transient.i)
(modules/navier_stokes/test/tests/finite_volume/ins/solidification/solidification_no_advection.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/rayleigh-bernard-two-phase.i)
(modules/navier_stokes/examples/solidification/gallium_melting.i)
(modules/navier_stokes/test/tests/finite_volume/ins/solidification/pipe_solidification.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-drift-flux-w-interface-area.i)
(modules/navier_stokes/test/tests/finite_volume/materials/mixture_material/mixture.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-drift-flux-transient.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_interface_area_model/pressure_driven_growth.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/lid-driven-two-phase.i)
(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-advection-slip.i)

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_interface_area_model/turbulent_driven_growth.i)

###############################################################################
# Validation test based on Hibiki and Ishii experiment [1] reported in Figure 5
# [1] Hibiki, T., & Ishii, M. (2000). One-group interfacial area transport of
# bubbly flows in vertical round tubes.
# International Journal of Heat and Mass Transfer, 43(15), 2711-2726.
###############################################################################

mu = 1.0
rho = 1000.0
mu_d = 1.0
rho_d = 1.0
l = ${fparse 50.8/1000.0}
U = 5.031429
dp = 0.005
inlet_phase_2 = 0.442
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
mass_exchange_coeff = 0.0
inlet_interface_area = ${fparse 6.0*inlet_phase_2/dp}

outlet_pressure = 1e5

[GlobalParams]
  rhie_chow_user_object = 'rc'
  density_interp_method = 'average'
  mu_interp_method = 'average'
[]

[Problem]
  identify_variable_groups_in_nl = false
  previous_nl_solution_required = true
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  coord_type = 'RZ'
  rz_coord_axis = 'X'
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 60}'
    ymin = 0
    ymax = '${fparse l / 2}'
    nx = 20
    ny = 5
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
    initial_condition = ${inlet_phase_2}
  []
  [interface_area]
    type = INSFVScalarFieldVariable
    initial_condition = ${inlet_interface_area}
  []
[]

[FVKernels]

  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = ${rho}
  []

  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_x
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []

  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_y
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []

  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_x'
    v_slip = 'vel_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_diffusion]
    type = FVDiffusion
    variable = phase_2
    coeff = 1.0
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = ${mass_exchange_coeff}
  []

  [interface_area_advection]
    type = INSFVScalarFieldAdvection
    variable = interface_area
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [interface_area_diffusion]
    type = FVDiffusion
    variable = interface_area
    coeff = 0.1
  []
  [interface_area_source_sink]
    type = WCNSFV2PInterfaceAreaSourceSink
    variable = interface_area
    u = 'vel_x'
    v = 'vel_y'
    L = ${fparse l/2}
    rho = 'rho_mixture'
    rho_d = 'rho'
    pressure = 'pressure'
    k_c = '${fparse mass_exchange_coeff}'
    fd = 'phase_2'
    sigma = 1e-3
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '${outlet_pressure}'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
  [inlet_interface_area]
    type = FVDirichletBC
    boundary = 'left'
    variable = interface_area
    value = ${inlet_interface_area}
  []

  [symmetry-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = vel_x
    u = vel_x
    v = vel_y
    mu = 'mu_mixture'
    momentum_component = 'x'
  []
  [symmetry-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = vel_y
    u = vel_x
    v = vel_y
    mu = 'mu_mixture'
    momentum_component = 'y'
  []
  [symmetry-p]
    type = INSFVSymmetryPressureBC
    boundary = 'bottom'
    variable = pressure
  []
  [symmetry-phase-2]
    type = INSFVSymmetryScalarBC
    boundary = 'bottom'
    variable = phase_2
  []
  [symmetry-interface-area]
    type = INSFVSymmetryScalarBC
    boundary = 'bottom'
    variable = interface_area
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FluidProperties]
  [fp]
    type = IdealGasFluidProperties
  []
[]

[FunctorMaterials]
  [bubble_properties]
    type = GeneralFunctorFluidProps
    fp = 'fp'
    pressure = 'pressure'
    T_fluid = 300.0
    speed = 1.0
    characteristic_length = 1.0
    porosity = 1.0
    output_properties = 'rho'
    outputs = 'out'
  []
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = 'rho ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  nl_rel_tol = 1e-10
  line_search = 'none'
[]

[Debug]
  show_var_residual_norms = true
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  [out]
    type = Exodus
  []
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    expression = '${rho} * ${l} * ${U}'
    pp_names = ''
  []
  [rho_outlet]
    type = SideAverageValue
    boundary = 'right'
    variable = 'rho_mixture_var'
  []
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-drift-flux.i)

mu = 1.0
rho = 10.0
mu_d = 0.1
rho_d = 1.0
l = 2
U = 1
dp = 0.01
inlet_phase_2 = 0.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'

[GlobalParams]
  rhie_chow_user_object = 'rc'
  density_interp_method = 'average'
  mu_interp_method = 'average'
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 5}'
    ymin = '${fparse -l / 2}'
    ymax = '${fparse l / 2}'
    nx = 10
    ny = 4
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
  []
[]

[FVKernels]
  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
  []

  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_x
    rho_d = ${rho_d}
    fd = 'phase_2'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_friction]
    type = PINSFVMomentumFriction
    Darcy_name = Darcy_coefficient_vec
    is_porous_medium = false
    momentum_component = x
    mu = mu_mixture
    rho = rho_mixture
    variable = vel_x
  []

  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_y
    rho_d = ${rho_d}
    fd = 'phase_2'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_friction]
    type = PINSFVMomentumFriction
    Darcy_name = Darcy_coefficient_vec
    is_porous_medium = false
    momentum_component = y
    mu = mu_mixture
    rho = rho_mixture
    variable = vel_y
  []

  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = 0.1
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '0'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FunctorMaterials]
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
    outputs = 'out'
    output_properties = 'vel_slip_x'
    ghost_layers = 5
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
    outputs = 'out'
    output_properties = 'vel_slip_y'
    ghost_layers = 5
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
    outputs = 'out'
    output_properties = 'phase_1'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = '${rho_d} ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  nl_rel_tol = 1e-10
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  print_linear_residuals = true
  print_nonlinear_residuals = true
  [out]
    type = Exodus
    hide = 'Re lin cum_lin'
  []
  [perf]
    type = PerfGraphOutput
  []
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    expression = '${rho} * ${l} * ${U}'
  []
  [lin]
    type = NumLinearIterations
  []
  [cum_lin]
    type = CumulativeValuePostprocessor
    postprocessor = lin
  []
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_interface_area_model/pressure_driven_growth_transient.i)

###############################################################################
# Validation test based on Hibiki and Ishii experiment [1] reported in Figure 3
# [1] Hibiki, T., & Ishii, M. (2000). One-group interfacial area transport of bubbly flows in vertical round tubes.
# International Journal of Heat and Mass Transfer, 43(15), 2711-2726.
###############################################################################

mu = 1.0
rho = 1000.0
mu_d = 1.0
rho_d = 1.0
l = ${fparse 50.8/1000.0}
U = 0.491230114
dp = 0.001
inlet_phase_2 = 0.049
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
mass_exchange_coeff = 0.0
inlet_interface_area = ${fparse 6.0*inlet_phase_2/dp}

outlet_pressure = 1e6

[GlobalParams]
  rhie_chow_user_object = 'rc'
  density_interp_method = 'average'
  mu_interp_method = 'average'
[]

[Problem]
  identify_variable_groups_in_nl = false
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  coord_type = 'RZ'
  rz_coord_axis = 'X'
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 60}'
    ymin = 0
    ymax = '${fparse l / 2}'
    nx = 20
    ny = 5
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
    initial_condition = ${inlet_phase_2}
  []
  [interface_area]
    type = INSFVScalarFieldVariable
    initial_condition = ${inlet_interface_area}
  []
[]

[FVKernels]

  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = ${rho}
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_x
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_y
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []

  [phase_2_time]
    type = FVFunctorTimeKernel
    variable = phase_2
    functor = phase_2
  []
  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_x'
    v_slip = 'vel_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_diffusion]
    type = FVDiffusion
    variable = phase_2
    coeff = 1.0
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = ${mass_exchange_coeff}
  []

  [interface_area_time]
    type = FVFunctorTimeKernel
    variable = interface_area
    functor = interface_area
  []
  [interface_area_advection]
    type = INSFVScalarFieldAdvection
    variable = interface_area
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [interface_area_diffusion]
    type = FVDiffusion
    variable = interface_area
    coeff = 0.1
  []
  [interface_area_source_sink]
    type = WCNSFV2PInterfaceAreaSourceSink
    variable = interface_area
    u = 'vel_x'
    v = 'vel_y'
    L = ${fparse l/2}
    rho = 'rho_mixture'
    rho_d = 'rho'
    pressure = 'pressure'
    k_c = '${fparse mass_exchange_coeff}'
    fd = 'phase_2'
    sigma = 1e-3
    cutoff_fraction = 0.0
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '${outlet_pressure}'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
  [inlet_interface_area]
    type = FVDirichletBC
    boundary = 'left'
    variable = interface_area
    value = ${inlet_interface_area}
  []

  [symmetry-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = vel_x
    u = vel_x
    v = vel_y
    mu = 'mu_mixture'
    momentum_component = 'x'
  []
  [symmetry-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = vel_y
    u = vel_x
    v = vel_y
    mu = 'mu_mixture'
    momentum_component = 'y'
  []
  [symmetry-p]
    type = INSFVSymmetryPressureBC
    boundary = 'bottom'
    variable = pressure
  []
  [symmetry-phase-2]
    type = INSFVSymmetryScalarBC
    boundary = 'bottom'
    variable = phase_2
  []
  [symmetry-interface-area]
    type = INSFVSymmetryScalarBC
    boundary = 'bottom'
    variable = interface_area
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FluidProperties]
  [fp]
    type = IdealGasFluidProperties
  []
[]

[FunctorMaterials]
  [bubble_properties]
    type = GeneralFunctorFluidProps
    fp = 'fp'
    pressure = 'pressure'
    T_fluid = 300.0
    speed = 1.0
    characteristic_length = 1.0
    porosity = 1.0
    output_properties = 'rho'
    outputs = 'out'
  []
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = 'rho ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Transient
  solve_type = 'NEWTON'
  nl_abs_tol = 1e-7
  dt = 0.1
  end_time = 1.0
  nl_max_its = 10
  line_search = 'none'
[]

[Debug]
  show_var_residual_norms = true
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  [out]
    type = Exodus
  []
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    expression = '${rho} * ${l} * ${U}'
    pp_names = ''
  []
  [rho_outlet]
    type = SideAverageValue
    boundary = 'right'
    variable = 'rho_mixture_var'
  []
[]

(modules/navier_stokes/test/tests/finite_volume/ins/solidification/solidification_no_advection.i)

rho_solid = 1.0
rho_liquid = 1.0
k_solid = 0.03
k_liquid = 0.1
cp_solid = 1.0
cp_liquid = 1.0
T_liquidus = 260
T_solidus = 240
L = 1.0

T_hot = 300.0
T_cold = 200.0
N = 10

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    nx = ${N}
    ny = ${N}
  []
[]

[AuxVariables]
  [fl]
    type = MooseVariableFVReal
    initial_condition = 1.0
  []
  [density]
    type = MooseVariableFVReal
  []
  [th_cond]
    type = MooseVariableFVReal
  []
  [cp_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [compute_fl]
    type = NSLiquidFractionAux
    variable = fl
    temperature = T
    T_liquidus = '${T_liquidus}'
    T_solidus = '${T_solidus}'
    execute_on = 'TIMESTEP_END'
  []
  [rho_out]
    type = FunctorAux
    functor = 'rho_mixture'
    variable = 'density'
  []
  [th_cond_out]
    type = FunctorAux
    functor = 'k_mixture'
    variable = 'th_cond'
  []
  [cp_out]
    type = FunctorAux
    functor = 'cp_mixture'
    variable = 'cp_var'
  []
[]

[Variables]
  [T]
    type = INSFVEnergyVariable
    initial_condition = '${T_hot}'
  []
[]

[FVKernels]
  [T_time]
    type = INSFVEnergyTimeDerivative
    variable = T
    rho = ${rho_liquid}
  []
  [energy_diffusion]
    type = FVDiffusion
    coeff = 'k_mixture'
    variable = T
  []
  [energy_source]
    type = NSFVPhaseChangeSource
    variable = T
    L = ${L}
    liquid_fraction = fl
    T_liquidus = ${T_liquidus}
    T_solidus = ${T_solidus}
    rho = 'rho_mixture'
  []
[]

[FVBCs]
  [heated_wall]
    type = FVDirichletBC
    variable = T
    value = '${T_hot}'
    boundary = 'top'
  []
  [cooled_wall]
    type = FVDirichletBC
    variable = T
    value = '${T_cold}'
    boundary = 'bottom'
  []
[]

[FunctorMaterials]
  [eff_cp]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${cp_solid} ${k_solid} ${rho_solid}'
    phase_1_names = '${cp_liquid} ${k_liquid} ${rho_liquid}'
    prop_names = 'cp_mixture k_mixture rho_mixture'
    phase_1_fraction = fl
  []
  [h]
    type = INSFVEnthalpyFunctorMaterial
    cp = ${cp_liquid}
    temperature = T
    rho = ${rho_liquid}
  []
[]

[Executioner]
  type = Transient
  dt = 0.5
  end_time = 50.0
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -pc_factor_shift_type'
  petsc_options_value = 'lu NONZERO'
  nl_abs_tol = 1e-12
  nl_max_its = 50
  steady_state_detection = true
[]

[Outputs]
  exodus = true
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/rayleigh-bernard-two-phase.i)

mu = 1.0
rho = 1e3
mu_d = 0.3
rho_d = 1.0
dp = 0.01
U_lid = 0.0
g = -9.81

[GlobalParams]
  velocity_interp_method = 'rc'
  advected_interp_method = 'upwind'
  rhie_chow_user_object = 'rc'
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = .1
    ymin = 0
    ymax = .1
    nx = 11
    ny = 11
  []
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
  []
  [vel_y]
    type = INSFVVelocityVariable
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
  []
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Correctors]
  [pin_pressure]
    type = NSPressurePin
    variable = pressure
    pin_type = point-value
    point = '0 0 0'
  []
[]

[FVKernels]
  [mass]
    type = INSFVMassAdvection
    variable = pressure
    rho = 'rho_mixture'
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_buoyant]
    type = INSFVMomentumGravity
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
    gravity = '0 ${g} 0'
  []

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_buoyant]
    type = INSFVMomentumGravity
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
    gravity = '0 ${g} 0'
  []

  [phase_2_time]
    type = FVFunctorTimeKernel
    variable = phase_2
  []
  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
  []
  [phase_2_diffusion]
    type = FVDiffusion
    variable = phase_2
    coeff = 1e-3
  []
[]

[FVBCs]
  [top_x]
    type = INSFVNoSlipWallBC
    variable = vel_x
    boundary = 'top'
    function = ${U_lid}
  []

  [no_slip_x]
    type = INSFVNoSlipWallBC
    variable = vel_x
    boundary = 'left right bottom'
    function = 0
  []

  [no_slip_y]
    type = INSFVNoSlipWallBC
    variable = vel_y
    boundary = 'left right top bottom'
    function = 0
  []

  [bottom_phase_2]
    type = FVDirichletBC
    variable = phase_2
    boundary = 'bottom'
    value = 1.0
  []

  [top_phase_2]
    type = FVDirichletBC
    variable = phase_2
    boundary = 'top'
    value = 0.0
  []
[]

[AuxVariables]
  [U]
    order = CONSTANT
    family = MONOMIAL
    fv = true
  []
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
  [phase_1]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [mag]
    type = VectorMagnitudeAux
    variable = U
    x = vel_x
    y = vel_y
  []
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
  [compute_phase_1]
    type = ParsedAux
    variable = phase_1
    coupled_variables = 'phase_2'
    expression = '1 - phase_2'
  []
[]

[FunctorMaterials]
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_1_names = '${rho_d} ${mu_d}'
    phase_2_names = '${rho} ${mu}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
[]

[Postprocessors]
  [average_void]
    type = ElementAverageValue
    variable = 'phase_2'
  []
  [max_y_velocity]
    type = ElementExtremeValue
    variable = 'vel_y'
    value_type = max
  []
  [min_y_velocity]
    type = ElementExtremeValue
    variable = 'vel_y'
    value_type = min
  []
  [max_x_velocity]
    type = ElementExtremeValue
    variable = 'vel_x'
    value_type = max
  []
  [min_x_velocity]
    type = ElementExtremeValue
    variable = 'vel_x'
    value_type = min
  []
  [max_x_slip_velocity]
    type = ElementExtremeFunctorValue
    functor = 'vel_slip_x'
    value_type = max
  []
  [max_y_slip_velocity]
    type = ElementExtremeFunctorValue
    functor = 'vel_slip_y'
    value_type = max
  []
  [max_drag_coefficient]
    type = ElementExtremeFunctorValue
    functor = 'drag_coefficient'
    value_type = max
  []
[]

[Preconditioning]
  [smp]
    type = SMP
    full = true
  []
[]

[Executioner]
  type = Transient
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -pc_factor_shift_type'
  petsc_options_value = 'lu       NONZERO'
  [TimeStepper]
    type = IterationAdaptiveDT
    optimal_iterations = 10
    iteration_window = 2
    growth_factor = 2
    cutback_factor = 0.5
    dt = 1e-3
  []
  nl_max_its = 20
  nl_rel_tol = 1e-03
  nl_abs_tol = 1e-9
  l_max_its = 5
  end_time = 1e8
[]

[Outputs]
  exodus = false
  [CSV]
    type = CSV
    execute_on = 'FINAL'
  []
[]

(modules/navier_stokes/examples/solidification/gallium_melting.i)

##########################################################
# Simulation of Gallium Melting Experiment
# Ref: Gau, C., & Viskanta, R. (1986). Melting and solidification of a pure metal on a vertical wall.
# Key physics: melting/solidification, convective heat transfer, natural convection
##########################################################

mu = 1.81e-3
rho_solid = 6093
rho_liquid = 6093
k_solid = 32
k_liquid = 32
cp_solid = 381.5
cp_liquid = 381.5
L = 80160
alpha_b = 1.2e-4
T_solidus = 302.93
T_liquidus = '${fparse T_solidus + 0.1}'
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
T_cold = 301.15
T_hot = 311.15
Nx = 100
Ny = 50

[GlobalParams]
  rhie_chow_user_object = 'rc'
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = 88.9e-3
    ymin = 0
    ymax = 63.5e-3
    nx = ${Nx}
    ny = ${Ny}
  []
[]

[AuxVariables]
  [U]
    type = MooseVariableFVReal
  []
  [fl]
    type = MooseVariableFVReal
    initial_condition = 0.0
  []
  [density]
    type = MooseVariableFVReal
  []
  [th_cond]
    type = MooseVariableFVReal
  []
  [cp_var]
    type = MooseVariableFVReal
  []
  [darcy_coef]
    type = MooseVariableFVReal
  []
  [fch_coef]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [mag]
    type = VectorMagnitudeAux
    variable = U
    x = vel_x
    y = vel_y
  []
  [compute_fl]
    type = NSLiquidFractionAux
    variable = fl
    temperature = T
    T_liquidus = '${T_liquidus}'
    T_solidus = '${T_solidus}'
    execute_on = 'TIMESTEP_END'
  []
  [rho_out]
    type = FunctorAux
    functor = 'rho_mixture'
    variable = 'density'
  []
  [th_cond_out]
    type = FunctorAux
    functor = 'k_mixture'
    variable = 'th_cond'
  []
  [cp_out]
    type = FunctorAux
    functor = 'cp_mixture'
    variable = 'cp_var'
  []
  [darcy_out]
    type = FunctorAux
    functor = 'Darcy_coefficient'
    variable = 'darcy_coef'
  []
  [fch_out]
    type = FunctorAux
    functor = 'Forchheimer_coefficient'
    variable = 'fch_coef'
  []
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0.0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0.0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [lambda]
    family = SCALAR
    order = FIRST
  []
  [T]
    type = INSFVEnergyVariable
    initial_condition = '${T_cold}'
    scaling = 1e-4
  []
[]

[FVKernels]
  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = rho_mixture
  []
  [mean_zero_pressure]
    type = FVIntegralValueConstraint
    variable = pressure
    lambda = lambda
    phi0 = 0.0
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = rho_mixture
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = rho_mixture
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = ${mu}
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_friction]
    type = PINSFVMomentumFriction
    variable = vel_x
    momentum_component = 'x'
    u = vel_x
    v = vel_y
    Darcy_name = 'Darcy_coeff'
    Forchheimer_name = 'Forchheimer_coeff'
    rho = ${rho_liquid}
    mu = ${mu}
    standard_friction_formulation = false
  []
  [u_buoyancy]
    type = INSFVMomentumBoussinesq
    variable = vel_x
    T_fluid = T
    gravity = '0 -9.81 0'
    rho = '${rho_liquid}'
    ref_temperature = ${T_cold}
    momentum_component = 'x'
  []
  [u_gravity]
    type = INSFVMomentumGravity
    variable = vel_x
    gravity = '0 -9.81 0'
    rho = '${rho_liquid}'
    momentum_component = 'x'
  []

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = rho_mixture
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = rho_mixture
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = ${mu}
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_friction]
    type = PINSFVMomentumFriction
    variable = vel_y
    momentum_component = 'y'
    u = vel_x
    v = vel_y
    Darcy_name = 'Darcy_coeff'
    Forchheimer_name = 'Forchheimer_coeff'
    rho = ${rho_liquid}
    mu = ${mu}
    standard_friction_formulation = false
  []
  [v_buoyancy]
    type = INSFVMomentumBoussinesq
    variable = vel_y
    T_fluid = T
    gravity = '0 -9.81 0'
    rho = '${rho_liquid}'
    ref_temperature = ${T_cold}
    momentum_component = 'y'
  []
  [v_gravity]
    type = INSFVMomentumGravity
    variable = vel_y
    gravity = '0 -9.81 0'
    rho = '${rho_liquid}'
    momentum_component = 'y'
  []

  [T_time]
    type = INSFVEnergyTimeDerivative
    variable = T
    rho = rho_mixture
    dh_dt = dh_dt
  []
  [energy_advection]
    type = INSFVEnergyAdvection
    variable = T
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = ${advected_interp_method}
  []
  [energy_diffusion]
    type = FVDiffusion
    coeff = k_mixture
    variable = T
  []
  [energy_source]
    type = NSFVPhaseChangeSource
    variable = T
    L = ${L}
    liquid_fraction = fl
    T_liquidus = ${T_liquidus}
    T_solidus = ${T_solidus}
    rho = 'rho_mixture'
  []
[]

[FVBCs]
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'left right top bottom'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'left right top bottom'
    variable = vel_y
    function = 0
  []
  [hot_wall]
    type = FVDirichletBC
    variable = T
    value = '${T_hot}'
    boundary = 'left'
  []
  [cold_wall]
    type = FVDirichletBC
    variable = T
    value = '${T_cold}'
    boundary = 'right'
  []
[]

[FunctorMaterials]
  [ins_fv]
    type = INSFVEnthalpyFunctorMaterial
    rho = rho_mixture
    cp = cp_mixture
    temperature = 'T'
  []
  [eff_cp]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${cp_solid} ${k_solid} ${rho_solid}'
    phase_1_names = '${cp_liquid} ${k_liquid} ${rho_liquid}'
    prop_names = 'cp_mixture k_mixture rho_mixture'
    phase_1_fraction = fl
  []
  [mushy_zone_resistance]
    type = INSFVMushyPorousFrictionFunctorMaterial
    liquid_fraction = 'fl'
    mu = '${mu}'
    rho_l = '${rho_liquid}'
    dendrite_spacing_scaling = 1e-1
  []
  [friction]
    type = ADGenericVectorFunctorMaterial
    prop_names = 'Darcy_coeff Forchheimer_coeff'
    prop_values = 'darcy_coef darcy_coef darcy_coef fch_coef fch_coef fch_coef'
  []
  [const_functor]
    type = ADGenericFunctorMaterial
    prop_names = 'alpha_b'
    prop_values = '${alpha_b}'
  []
[]

[Executioner]
  type = Transient

  # Time-stepping parameters
  start_time = 0.0
  end_time = 200.0
  num_steps = 2

  [TimeStepper]
    type = IterationAdaptiveDT
    # Raise time step often but not by as much
    # There's a rough spot for convergence near 10% fluid fraction
    optimal_iterations = 15
    growth_factor = 1.5
    dt = 0.1
  []

  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -pc_factor_shift_type'
  petsc_options_value = 'lu NONZERO'
  nl_rel_tol = 1e-6
  nl_max_its = 30
  line_search = 'none'
[]

[Postprocessors]
  [ave_p]
    type = ElementAverageValue
    variable = 'pressure'
    execute_on = 'INITIAL TIMESTEP_END'
  []
  [ave_fl]
    type = ElementAverageValue
    variable = 'fl'
    execute_on = 'INITIAL TIMESTEP_END'
  []
  [ave_T]
    type = ElementAverageValue
    variable = 'T'
    execute_on = 'INITIAL TIMESTEP_END'
  []
[]

[VectorPostprocessors]
  [vel_x]
    type = ElementValueSampler
    variable = 'vel_x fl'
    sort_by = 'x'
  []
[]

[Outputs]
  exodus = true
  csv = true
[]

(modules/navier_stokes/test/tests/finite_volume/ins/solidification/pipe_solidification.i)

mu = 8.8871e-4
rho_solid = 997.561
rho_liquid = 997.561
k_solid = 0.6203
k_liquid = 0.6203
cp_solid = 4181.72
cp_liquid = 4181.72
L = 3e5
T_liquidus = 285
T_solidus = 280

advected_interp_method = 'average'
velocity_interp_method = 'rc'

U_inlet = '${fparse 0.5 * mu / rho_liquid / 0.5}'
T_inlet = 300.0
T_cold = 200.0
Nx = 30
Ny = 5

[GlobalParams]
  rhie_chow_user_object = 'rc'
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  coord_type = 'RZ'
  rz_coord_axis = 'X'
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = 10
    ymin = 0
    ymax = '${fparse 0.5 * 1.0}'
    nx = ${Nx}
    ny = ${Ny}
    bias_y = '${fparse 1 / 1.2}'
  []
  [rename1]
    type = RenameBoundaryGenerator
    input = gen
    old_boundary = 'left'
    new_boundary = 'inlet'
  []
  [rename2]
    type = RenameBoundaryGenerator
    input = rename1
    old_boundary = 'right'
    new_boundary = 'outlet'
  []
  [rename3]
    type = RenameBoundaryGenerator
    input = rename2
    old_boundary = 'bottom'
    new_boundary = 'symmetry'
  []
  [rename4]
    type = RenameBoundaryGenerator
    input = rename3
    old_boundary = 'top'
    new_boundary = 'wall'
  []
  [rename5]
    type = ParsedGenerateSideset
    input = rename4
    normal = '0 1 0'
    combinatorial_geometry = 'x>2.0 & x<8.0 & y>0.49999'
    new_sideset_name = 'cooled_wall'
  []
[]

[AuxVariables]
  [U]
    type = MooseVariableFVReal
  []
  [fl]
    type = MooseVariableFVReal
    initial_condition = 1.0
  []
  [density]
    type = MooseVariableFVReal
  []
  [th_cond]
    type = MooseVariableFVReal
  []
  [cp_var]
    type = MooseVariableFVReal
  []
  [darcy_coef]
    type = MooseVariableFVReal
  []
  [fch_coef]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [mag]
    type = VectorMagnitudeAux
    variable = U
    x = vel_x
    y = vel_y
  []
  [compute_fl]
    type = NSLiquidFractionAux
    variable = fl
    temperature = T
    T_liquidus = '${T_liquidus}'
    T_solidus = '${T_solidus}'
    execute_on = 'TIMESTEP_END'
  []
  [rho_out]
    type = FunctorAux
    functor = 'rho_mixture'
    variable = 'density'
  []
  [th_cond_out]
    type = FunctorAux
    functor = 'k_mixture'
    variable = 'th_cond'
  []
  [cp_out]
    type = FunctorAux
    functor = 'cp_mixture'
    variable = 'cp_var'
  []
  [darcy_out]
    type = FunctorAux
    functor = 'Darcy_coefficient'
    variable = 'darcy_coef'
  []
  [fch_out]
    type = FunctorAux
    functor = 'Forchheimer_coefficient'
    variable = 'fch_coef'
  []
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0.0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0.0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [T]
    type = INSFVEnergyVariable
    initial_condition = '${T_inlet}'
    scaling = 1.0
  []
[]

[FVKernels]
  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = rho_mixture
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = rho_mixture
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = rho_mixture
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = ${mu}
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_friction]
    type = PINSFVMomentumFriction
    variable = vel_x
    momentum_component = 'x'
    u = vel_x
    v = vel_y
    Darcy_name = 'Darcy_coeff'
    Forchheimer_name = 'Forchheimer_coeff'
    rho = ${rho_liquid}
    mu = ${mu}
    standard_friction_formulation = false
  []

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = rho_mixture
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = rho_mixture
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = ${mu}
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_friction]
    type = PINSFVMomentumFriction
    variable = vel_y
    momentum_component = 'y'
    u = vel_x
    v = vel_y
    Darcy_name = 'Darcy_coeff'
    Forchheimer_name = 'Forchheimer_coeff'
    rho = ${rho_liquid}
    mu = ${mu}
    standard_friction_formulation = false
  []

  [T_time]
    type = INSFVEnergyTimeDerivative
    variable = T
    rho = rho_mixture
    dh_dt = dh_dt
  []
  [energy_advection]
    type = INSFVEnergyAdvection
    variable = T
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = ${advected_interp_method}
  []
  [energy_diffusion]
    type = FVDiffusion
    coeff = k_mixture
    variable = T
  []
  [energy_source]
    type = NSFVPhaseChangeSource
    variable = T
    L = ${L}
    liquid_fraction = fl
    T_liquidus = ${T_liquidus}
    T_solidus = ${T_solidus}
    rho = 'rho_mixture'
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'inlet'
    variable = vel_x
    function = '${U_inlet}'
  []
  [sym_u]
    type = INSFVSymmetryVelocityBC
    boundary = 'symmetry'
    variable = vel_x
    u = vel_x
    v = vel_y
    mu = ${mu}
    momentum_component = 'x'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'inlet'
    variable = vel_y
    function = 0
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'wall'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'wall'
    variable = vel_y
    function = 0
  []
  [sym_v]
    type = INSFVSymmetryVelocityBC
    boundary = 'symmetry'
    variable = vel_y
    u = vel_x
    v = vel_y
    mu = ${mu}
    momentum_component = y
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'outlet'
    variable = pressure
    function = 0
  []
  [sym_p]
    type = INSFVSymmetryPressureBC
    boundary = 'symmetry'
    variable = pressure
  []
  [sym_T]
    type = INSFVSymmetryScalarBC
    variable = T
    boundary = 'symmetry'
  []
  [cooled_wall]
    type = FVFunctorDirichletBC
    variable = T
    functor = '${T_cold}'
    boundary = 'cooled_wall'
  []
[]

[FunctorMaterials]
  [ins_fv]
    type = INSFVEnthalpyFunctorMaterial
    rho = rho_mixture
    cp = cp_mixture
    temperature = 'T'
  []
  [eff_cp]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${cp_solid} ${k_solid} ${rho_solid}'
    phase_1_names = '${cp_liquid} ${k_liquid} ${rho_liquid}'
    prop_names = 'cp_mixture k_mixture rho_mixture'
    phase_1_fraction = fl
  []
  [mushy_zone_resistance]
    type = INSFVMushyPorousFrictionFunctorMaterial
    liquid_fraction = 'fl'
    mu = '${mu}'
    rho_l = '${rho_liquid}'
  []
  [friction]
    type = ADGenericVectorFunctorMaterial
    prop_names = 'Darcy_coeff Forchheimer_coeff'
    prop_values = 'darcy_coef darcy_coef darcy_coef fch_coef fch_coef fch_coef'
  []
[]

[Executioner]
  type = Transient
  dt = 5e3
  end_time = 1e4
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -pc_factor_shift_type'
  petsc_options_value = 'lu NONZERO'
  nl_abs_tol = 1e-8
  nl_max_its = 12
[]

[Postprocessors]
  [average_T]
    type = ElementAverageValue
    variable = T
    outputs = csv
    execute_on = FINAL
  []
[]

[VectorPostprocessors]
  [sat]
    type = LineValueSampler
    warn_discontinuous_face_values = false
    start_point = '0.0 0 0'
    end_point = '10.0 0 0'
    num_points = '${Nx}'
    sort_by = x
    variable = 'T'
    execute_on = FINAL
  []
[]

[Outputs]
  exodus = true
  [csv]
    type = CSV
    execute_on = 'FINAL'
  []
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-drift-flux-w-interface-area.i)

mu = 10.0
rho = 100.0
mu_d = 1.0
rho_d = 1.0
l = 2
U = 1
dp = 0.01
inlet_phase_2 = 0.0
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
mass_exchange_coeff = 0.01

[GlobalParams]
  rhie_chow_user_object = 'rc'
  density_interp_method = 'average'
  mu_interp_method = 'average'
[]

[Problem]
  identify_variable_groups_in_nl = false
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 5}'
    ymin = '${fparse -l / 2}'
    ymax = '${fparse l / 2}'
    nx = 20
    ny = 5
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
  []
  [interface_area]
    type = INSFVScalarFieldVariable
  []
[]

[FVKernels]

  inactive = 'u_time v_time phase_2_time interface_area_time'

  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = ${rho}
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_x
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_y
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []

  [phase_2_time]
    type = FVFunctorTimeKernel
    variable = phase_2
    functor = phase_2
  []
  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_diffusion]
    type = FVDiffusion
    variable = phase_2
    coeff = 1.0
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = ${mass_exchange_coeff}
  []

  [interface_area_time]
    type = FVFunctorTimeKernel
    variable = interface_area
    functor = interface_area
  []
  [interface_area_advection]
    type = INSFVScalarFieldAdvection
    variable = interface_area
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [interface_area_diffusion]
    type = FVDiffusion
    variable = interface_area
    coeff = 0.1
  []
  [interface_area_source_sink]
    type = WCNSFV2PInterfaceAreaSourceSink
    variable = interface_area
    u = 'vel_x'
    v = 'vel_y'
    L = 1.0
    rho = 'rho_mixture'
    rho_d = ${rho_d}
    pressure = 'pressure'
    k_c = ${fparse mass_exchange_coeff * 100.0}
    fd = 'phase_2'
    sigma = 1e-3
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '0'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
  [inlet_interface_area]
    type = FVDirichletBC
    boundary = 'left'
    variable = interface_area
    value = 0.0
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FunctorMaterials]
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = '${rho_d} ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  nl_rel_tol = 1e-10
  # dt = 0.1
  # end_time = 1.0
  # nl_max_its = 10
[]

[Debug]
  show_var_residual_norms = true
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  exodus = true
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    function = '${rho} * ${l} * ${U}'
    pp_names = ''
  []
  [rho_outlet]
    type = SideAverageValue
    boundary = 'right'
    variable = 'rho_mixture_var'
  []
[]

(modules/navier_stokes/test/tests/finite_volume/materials/mixture_material/mixture.i)

[Mesh]
  [gmg]
    type = GeneratedMeshGenerator
    dim = 1
    nx = 5
  []
[]

[AuxVariables]
  [fl]
    type = MooseVariableFVReal
  []
  [cp]
    type = MooseVariableFVReal
  []
  [k]
    type = MooseVariableFVReal
  []
[]

[ICs]
  [FunctionIC]
    type = FunctionIC
    variable = fl
    function = 'x'
  []
[]

[AuxKernels]
  [cp_aux]
    type = FunctorAux
    functor = cp_mixture
    variable = cp
  []
  [k_aux]
    type = FunctorAux
    functor = k_mixture
    variable = k
  []
[]

[VectorPostprocessors]
  [cp]
    type = LineValueSampler
    start_point = '0.1 0 0'
    end_point = '0.9 0 0'
    num_points = 5
    variable = cp
    sort_by = x
  []
  [k]
    type = LineValueSampler
    start_point = '0.1 0 0'
    end_point = '0.9 0 0'
    num_points = 5
    variable = k
    sort_by = x
  []
  [fl]
    type = LineValueSampler
    start_point = '0.1 0 0'
    end_point = '0.9 0 0'
    num_points = 5
    variable = fl
    sort_by = x
  []
[]

[Functions]
  [cp_solid]
    type = ADParsedFunction
    expression = '1 - x'
  []
  [cp_liquid]
    type = ADParsedFunction
    expression = 'x'
  []
  [k_solid]
    type = ADParsedFunction
    expression = '2 - 3*x'
  []
  [k_liquid]
    type = ADParsedFunction
    expression = '3*x'
  []
[]

[FunctorMaterials]
  [eff_cp]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = 'cp_solid k_solid'
    phase_1_names = 'cp_liquid k_liquid'
    prop_names = 'cp_mixture k_mixture'
    phase_1_fraction = fl
  []
[]

[Problem]
  solve = false
[]

[Executioner]
  type = Steady
[]

[Outputs]
  csv = true
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-drift-flux-transient.i)

mu = 1.0
rho = 10.0
mu_d = 0.1
rho_d = 1.0
l = 2
U = 1
dp = 0.01
inlet_phase_2 = 0.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'

[GlobalParams]
  rhie_chow_user_object = 'rc'
  density_interp_method = 'average'
  mu_interp_method = 'average'
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 5}'
    ymin = '${fparse -l / 2}'
    ymax = '${fparse l / 2}'
    nx = 10
    ny = 4
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
  []
[]

[FVKernels]

  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_x
    rho_d = ${rho_d}
    fd = 'phase_2'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_friction]
    type = PINSFVMomentumFriction
    Darcy_name = Darcy_coefficient_vec
    is_porous_medium = false
    momentum_component = x
    mu = mu_mixture
    rho = rho_mixture
    variable = vel_x
  []

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_y
    rho_d = ${rho_d}
    fd = 'phase_2'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_friction]
    type = PINSFVMomentumFriction
    Darcy_name = Darcy_coefficient_vec
    is_porous_medium = false
    momentum_component = y
    mu = mu_mixture
    rho = rho_mixture
    variable = vel_y
  []

  [phase_2_time]
    type = FVFunctorTimeKernel
    variable = phase_2
    functor = phase_2
  []
  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = 0.1
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '0'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
  [vel_slip_x_var]
    type = MooseVariableFVReal
  []
  [vel_slip_y_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
  [populate_vx_slip_var]
    type = FunctorAux
    variable = vel_slip_x_var
    functor = 'vel_slip_x'
  []
  [populate_vy_slip_var]
    type = FunctorAux
    variable = vel_slip_y_var
    functor = 'vel_slip_y'
  []
[]

[FunctorMaterials]
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = '${rho_d} ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Transient
  solve_type = 'NEWTON'
  nl_rel_tol = 1e-10
  dt = 0.1
  end_time = 1.0
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  exodus = false
  [CSV]
    type = CSV
    execute_on = 'TIMESTEP_END'
  []
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    expression = '${rho} * ${l} * ${U}'
  []
  [rho_outlet]
    type = SideAverageValue
    boundary = 'right'
    variable = 'rho_mixture_var'
  []
  [vslip_x]
    type = SideExtremeValue
    boundary = 'left'
    variable = 'vel_slip_x_var'
  []
  [vslip_y]
    type = SideExtremeValue
    boundary = 'left'
    variable = 'vel_slip_y_var'
  []
  [vslip_value]
    type = ParsedPostprocessor
    expression = 'sqrt(vslip_x*vslip_x + vslip_y*vslip_y)*vslip_x/abs(vslip_x)'
    pp_names = 'vslip_x vslip_y'
  []
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_interface_area_model/pressure_driven_growth.i)

###############################################################################
# Validation test based on Hibiki and Ishii experiment [1] reported in Figure 3
# [1] Hibiki, T., & Ishii, M. (2000). One-group interfacial area transport of bubbly flows in vertical round tubes.
# International Journal of Heat and Mass Transfer, 43(15), 2711-2726.
###############################################################################

mu = 1.0
rho = 1000.0
mu_d = 1.0
rho_d = 1.0
l = ${fparse 50.8/1000.0}
U = 0.491230114
dp = 0.001
inlet_phase_2 = 0.049
advected_interp_method = 'upwind'
velocity_interp_method = 'rc'
mass_exchange_coeff = 0.0
inlet_interface_area = ${fparse 6.0*inlet_phase_2/dp}

outlet_pressure = 1e5

[GlobalParams]
  rhie_chow_user_object = 'rc'
  density_interp_method = 'average'
  mu_interp_method = 'average'
[]

[Problem]
  identify_variable_groups_in_nl = false
  previous_nl_solution_required = true
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  coord_type = 'RZ'
  rz_coord_axis = 'X'
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 60}'
    ymin = 0
    ymax = '${fparse l / 2}'
    nx = 20
    ny = 5
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
    initial_condition = ${inlet_phase_2}
  []
  [interface_area]
    type = INSFVScalarFieldVariable
    initial_condition = ${inlet_interface_area}
  []
[]

[FVKernels]

  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = ${rho}
  []

  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_x
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []

  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_drift]
    type = WCNSFV2PMomentumDriftFlux
    variable = vel_y
    rho_d = ${rho_d}
    fd = 'rho_mixture_var'
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []

  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_x'
    v_slip = 'vel_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_diffusion]
    type = FVDiffusion
    variable = phase_2
    coeff = 1.0
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = ${mass_exchange_coeff}
  []

  [interface_area_advection]
    type = INSFVScalarFieldAdvection
    variable = interface_area
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [interface_area_diffusion]
    type = FVDiffusion
    variable = interface_area
    coeff = 0.1
  []
  [interface_area_source_sink]
    type = WCNSFV2PInterfaceAreaSourceSink
    variable = interface_area
    u = 'vel_x'
    v = 'vel_y'
    L = ${fparse l/2}
    rho = 'rho_mixture'
    rho_d = 'rho'
    pressure = 'pressure'
    k_c = '${fparse mass_exchange_coeff}'
    fd = 'phase_2'
    sigma = 1e-3
    cutoff_fraction = 0.0
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '${outlet_pressure}'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
  [inlet_interface_area]
    type = FVDirichletBC
    boundary = 'left'
    variable = interface_area
    value = ${inlet_interface_area}
  []

  [symmetry-u]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = vel_x
    u = vel_x
    v = vel_y
    mu = 'mu_mixture'
    momentum_component = 'x'
  []
  [symmetry-v]
    type = PINSFVSymmetryVelocityBC
    boundary = 'bottom'
    variable = vel_y
    u = vel_x
    v = vel_y
    mu = 'mu_mixture'
    momentum_component = 'y'
  []
  [symmetry-p]
    type = INSFVSymmetryPressureBC
    boundary = 'bottom'
    variable = pressure
  []
  [symmetry-phase-2]
    type = INSFVSymmetryScalarBC
    boundary = 'bottom'
    variable = phase_2
  []
  [symmetry-interface-area]
    type = INSFVSymmetryScalarBC
    boundary = 'bottom'
    variable = interface_area
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FluidProperties]
  [fp]
    type = IdealGasFluidProperties
  []
[]

[FunctorMaterials]
  [bubble_properties]
    type = GeneralFunctorFluidProps
    fp = 'fp'
    pressure = 'pressure'
    T_fluid = 300.0
    speed = 1.0
    characteristic_length = 1.0
    porosity = 1.0
    output_properties = 'rho'
    outputs = 'out'
  []
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = 'rho ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  nl_rel_tol = 1e-10
  line_search = 'none'
[]

[Debug]
  show_var_residual_norms = true
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  [out]
    type = Exodus
  []
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    expression = '${rho} * ${l} * ${U}'
    pp_names = ''
  []
  [rho_outlet]
    type = SideAverageValue
    boundary = 'right'
    variable = 'rho_mixture_var'
  []
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/lid-driven-two-phase.i)

mu = 1.0
rho = 1.0e3
mu_d = 0.3
rho_d = 1.0
dp = 0.01
U_lid = 0.1
g = -9.81

[GlobalParams]
  velocity_interp_method = 'rc'
  advected_interp_method = 'upwind'
  rhie_chow_user_object = 'rc'
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = .1
    ymin = 0
    ymax = .1
    nx = 5
    ny = 5
  []
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
  []
  [vel_y]
    type = INSFVVelocityVariable
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
  []
  [lambda]
    family = SCALAR
    order = FIRST
  []
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[FVKernels]
  [mass]
    type = INSFVMassAdvection
    variable = pressure
    rho = 'rho_mixture'
  []
  [mean_zero_pressure]
    type = FVPointValueConstraint
    variable = pressure
    lambda = lambda
    point = '0 0 0'
  []

  [u_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_buoyant]
    type = INSFVMomentumGravity
    variable = vel_x
    rho = 'rho_mixture'
    momentum_component = 'x'
    gravity = '0 ${g} 0'
  []
  # NOTE: the friction terms for u and v are missing

  [v_time]
    type = INSFVMomentumTimeDerivative
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_buoyant]
    type = INSFVMomentumGravity
    variable = vel_y
    rho = 'rho_mixture'
    momentum_component = 'y'
    gravity = '0 ${g} 0'
  []

  [phase_2_time]
    type = FVFunctorTimeKernel
    variable = phase_2
  []
  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
  []
  [phase_2_diffusion]
    type = FVDiffusion
    variable = phase_2
    coeff = 1e-3
  []
[]

[FVBCs]
  [top_x]
    type = INSFVNoSlipWallBC
    variable = vel_x
    boundary = 'top'
    function = ${U_lid}
  []

  [no_slip_x]
    type = INSFVNoSlipWallBC
    variable = vel_x
    boundary = 'left right bottom'
    function = 0
  []

  [no_slip_y]
    type = INSFVNoSlipWallBC
    variable = vel_y
    boundary = 'left right top bottom'
    function = 0
  []

  [bottom_phase_2]
    type = FVDirichletBC
    variable = phase_2
    boundary = 'bottom'
    value = 1.0
  []

  [top_phase_2]
    type = FVDirichletBC
    variable = phase_2
    boundary = 'top'
    value = 0.0
  []
[]

[AuxVariables]
  [U]
    order = CONSTANT
    family = MONOMIAL
    fv = true
  []
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [mag]
    type = VectorMagnitudeAux
    variable = U
    x = vel_x
    y = vel_y
  []
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FunctorMaterials]
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
    gravity = '0 ${g} 0'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
    gravity = '0 ${g} 0'
  []
  [compute_phase_1]
    type = ADParsedFunctorMaterial
    property_name = phase_1
    functor_names = 'phase_2'
    expression = '1 - phase_2'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_1_names = '${rho_d} ${mu_d}'
    phase_2_names = '${rho} ${mu}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Postprocessors]
  [average_void]
    type = ElementAverageValue
    variable = 'phase_2'
  []
  [max_y_velocity]
    type = ElementExtremeValue
    variable = 'vel_y'
    value_type = max
  []
  [min_y_velocity]
    type = ElementExtremeValue
    variable = 'vel_y'
    value_type = min
  []
  [max_x_velocity]
    type = ElementExtremeValue
    variable = 'vel_x'
    value_type = max
  []
  [min_x_velocity]
    type = ElementExtremeValue
    variable = 'vel_x'
    value_type = min
  []
  [max_x_slip_velocity]
    type = ElementExtremeFunctorValue
    functor = 'vel_slip_x'
    value_type = max
  []
  [max_y_slip_velocity]
    type = ElementExtremeFunctorValue
    functor = 'vel_slip_y'
    value_type = max
  []
  [max_drag_coefficient]
    type = ElementExtremeFunctorValue
    functor = 'drag_coefficient'
    value_type = max
  []
[]

[Preconditioning]
  [smp]
    type = SMP
    full = true
  []
[]

[Executioner]
  type = Transient
  solve_type = 'NEWTON'
  petsc_options_iname = '-pc_type -pc_factor_shift_type'
  petsc_options_value = 'lu NONZERO'

  [TimeStepper]
    type = IterationAdaptiveDT
    optimal_iterations = 7
    iteration_window = 2
    growth_factor = 2.0
    cutback_factor = 0.5
    dt = 1e-3
  []
  nl_max_its = 20
  nl_rel_tol = 1e-03
  nl_abs_tol = 1e-9
  l_max_its = 5
  end_time = 1e8
  line_search=none
[]

[Outputs]
  exodus = false
  [CSV]
    type = CSV
    execute_on = 'FINAL'
    execute_scalars_on = NONE
  []
[]

(modules/navier_stokes/test/tests/finite_volume/two_phase/mixture_model/channel-advection-slip.i)

mu = 1.0
rho = 10.0
mu_d = 0.1
rho_d = 1.0
l = 2
U = 1
dp = 0.01
inlet_phase_2 = 0.1
advected_interp_method = 'average'
velocity_interp_method = 'rc'

[GlobalParams]
  rhie_chow_user_object = 'rc'
  mu_interp_method = 'average'
[]

[UserObjects]
  [rc]
    type = INSFVRhieChowInterpolator
    u = vel_x
    v = vel_y
    pressure = pressure
  []
[]

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    xmin = 0
    xmax = '${fparse l * 5}'
    ymin = '${fparse -l / 2}'
    ymax = '${fparse l / 2}'
    nx = 10
    ny = 6
  []
  uniform_refine = 0
[]

[Variables]
  [vel_x]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [vel_y]
    type = INSFVVelocityVariable
    initial_condition = 0
  []
  [pressure]
    type = INSFVPressureVariable
  []
  [phase_2]
    type = INSFVScalarFieldVariable
  []
[]

[FVKernels]

  [mass]
    type = INSFVMassAdvection
    variable = pressure
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
  []

  [u_advection]
    type = INSFVMomentumAdvection
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'x'
  []
  [u_advection_slip]
    type = WCNSFV2PMomentumAdvectionSlip
    variable = vel_x
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = ${rho}
    rho_d = ${rho_d}
    fd = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'x'
  []
  [u_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_x
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'x'
  []
  [u_pressure]
    type = INSFVMomentumPressure
    variable = vel_x
    momentum_component = 'x'
    pressure = pressure
  []
  [u_friction]
    type = PINSFVMomentumFriction
    Darcy_name = Darcy_coefficient_vec
    is_porous_medium = false
    momentum_component = x
    mu = mu_mixture
    rho = rho_mixture
    variable = vel_x
  []

  [v_advection]
    type = INSFVMomentumAdvection
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = 'rho_mixture'
    momentum_component = 'y'
  []
  [v_advection_slip]
    type = WCNSFV2PMomentumAdvectionSlip
    variable = vel_y
    advected_interp_method = ${advected_interp_method}
    velocity_interp_method = ${velocity_interp_method}
    rho = ${rho}
    rho_d = ${rho_d}
    fd = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    momentum_component = 'y'
  []
  [v_viscosity]
    type = INSFVMomentumDiffusion
    variable = vel_y
    mu = 'mu_mixture'
    limit_interpolation = true
    momentum_component = 'y'
  []
  [v_pressure]
    type = INSFVMomentumPressure
    variable = vel_y
    momentum_component = 'y'
    pressure = pressure
  []
  [v_friction]
    type = PINSFVMomentumFriction
    Darcy_name = Darcy_coefficient_vec
    is_porous_medium = false
    momentum_component = y
    mu = mu_mixture
    rho = rho_mixture
    variable = vel_y
  []

  [phase_2_advection]
    type = INSFVScalarFieldAdvection
    variable = phase_2
    u_slip = 'vel_slip_x'
    v_slip = 'vel_slip_y'
    velocity_interp_method = ${velocity_interp_method}
    advected_interp_method = 'upwind'
  []
  [phase_2_src]
    type = NSFVMixturePhaseInterface
    variable = phase_2
    phase_coupled = phase_1
    alpha = 0.1
  []
[]

[FVBCs]
  [inlet-u]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_x
    functor = '${U}'
  []
  [inlet-v]
    type = INSFVInletVelocityBC
    boundary = 'left'
    variable = vel_y
    functor = '0'
  []
  [walls-u]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_x
    function = 0
  []
  [walls-v]
    type = INSFVNoSlipWallBC
    boundary = 'top bottom'
    variable = vel_y
    function = 0
  []
  [outlet_p]
    type = INSFVOutletPressureBC
    boundary = 'right'
    variable = pressure
    function = '0'
  []
  [inlet_phase_2]
    type = FVDirichletBC
    boundary = 'left'
    variable = phase_2
    value = ${inlet_phase_2}
  []
[]

[AuxVariables]
  [drag_coefficient]
    type = MooseVariableFVReal
  []
  [rho_mixture_var]
    type = MooseVariableFVReal
  []
  [mu_mixture_var]
    type = MooseVariableFVReal
  []
[]

[AuxKernels]
  [populate_cd]
    type = FunctorAux
    variable = drag_coefficient
    functor = 'Darcy_coefficient'
  []
  [populate_rho_mixture_var]
    type = FunctorAux
    variable = rho_mixture_var
    functor = 'rho_mixture'
  []
  [populate_mu_mixture_var]
    type = FunctorAux
    variable = mu_mixture_var
    functor = 'mu_mixture'
  []
[]

[FunctorMaterials]
  [phase_1]
    property_name = 'phase_1'
    type = ADParsedFunctorMaterial
    functor_names = 'phase_2'
    expression = '1 - phase_2'
    outputs = 'out'
    output_properties = 'phase_1'
  []
  [populate_u_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_x'
    momentum_component = 'x'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
    outputs = 'out'
    output_properties = 'vel_slip_x'
  []
  [populate_v_slip]
    type = WCNSFV2PSlipVelocityFunctorMaterial
    slip_velocity_name = 'vel_slip_y'
    momentum_component = 'y'
    u = 'vel_x'
    v = 'vel_y'
    rho = ${rho}
    mu = 'mu_mixture'
    rho_d = ${rho_d}
    particle_diameter = ${dp}
    linear_coef_name = 'Darcy_coefficient'
    outputs = 'out'
    output_properties = 'vel_slip_y'
  []
  [CD]
    type = NSFVDispersePhaseDragFunctorMaterial
    rho = 'rho_mixture'
    mu = mu_mixture
    u = 'vel_x'
    v = 'vel_y'
    particle_diameter = ${dp}
  []
  [mixing_material]
    type = NSFVMixtureFunctorMaterial
    phase_2_names = '${rho} ${mu}'
    phase_1_names = '${rho_d} ${mu_d}'
    prop_names = 'rho_mixture mu_mixture'
    phase_1_fraction = 'phase_2'
  []
[]

[Executioner]
  type = Steady
  solve_type = 'NEWTON'
  nl_rel_tol = 1e-10
[]

[Preconditioning]
  [SMP]
    type = SMP
    full = true
    petsc_options_iname = '-pc_type -pc_factor_shift_type'
    petsc_options_value = 'lu       NONZERO'
  []
[]

[Outputs]
  [out]
    type = Exodus
    hide = 'Re lin cum_lin'
  []
[]

[Postprocessors]
  [Re]
    type = ParsedPostprocessor
    expression = '${rho} * ${l} * ${U}'
  []
  [lin]
    type = NumLinearIterations
  []
  [cum_lin]
    type = CumulativeValuePostprocessor
    postprocessor = lin
  []
[]

Input Parameters
Input Files