SubChannel Failure Analysis Report

Introduction

The FAR for the SubChannel module describes the system functional and non-functional requirements that describe the expected interactions that the software shall provide.

Dependencies

The SubChannel module is developed using MOOSE and can itself be based on various MOOSE modules, as such the FAR for the SubChannel module is dependent upon the following documents.

Failure Analysis Requirements

The following is a complete list for all the requirements related to failure analysis for the SubChannel module.

subchannel: Mesh
20.3.11The system shall check the minimum number of subchannels
Specification(s): subchannel_number
Design: SCMQuadSubChannelMeshGenerator
Issue(s): #29224
Collection(s): FUNCTIONALFAILURE_ANALYSIS
Type(s): RunException
27

subchannel: Postprocessors
20.6.2The system will test the user provided height
Specification(s): subchannel_height
Design: SubChannelPointValue
Issue(s): #29226 #29486
Collection(s): FUNCTIONALFAILURE_ANALYSIS
Type(s): RunException
27


[subchannel_number]
  type = 'RunException'
  input = 'subchannel_number.i'
  expect_err = "The number of subchannels cannot be less than 2 in both directions \(x and y\)\. Smallest assembly allowed is either 2X1 or 1X2\."
  issues = '#29224'
  requirement = 'The system shall check the minimum number of subchannels'
[]

Introduction
Dependencies
Failure Analysis Requirements