idaholab/moose: solid_mechanics coverage diff

Base e0c998 Head #31730 e8b711
Total Total +/- New
Rate 84.97% 84.96% -0.01% 100.00%
Hits 28104 28105 +1 12
Misses 4972 4975 +3 0
Filename Stmts Miss Cover
modules/solid_mechanics/src/materials/ComputeIncrementalStrainBase.C +1 0 +100.00%
modules/solid_mechanics/src/userobjects/CrackFrontDefinition.C +3 +3 -0.31%
TOTAL +4 +3 -0.01%
code
coverage unchanged
code
coverage increased
code
coverage decreased
+
line added or modified

modules/solid_mechanics/src/materials/ComputeIncrementalStrainBase.C

26  
27  
28  
29 +
30 +
31  
32  
33  

    _deformation_gradient(declareProperty<RankTwoTensor>(_base_name + "deformation_gradient")),
    _mechanical_strain_old(getMaterialPropertyOld<RankTwoTensor>(_base_name + "mechanical_strain")),
    _total_strain_old(getMaterialPropertyOld<RankTwoTensor>(_base_name + "total_strain")),
    _eigenstrains_old(_eigenstrain_names.size()),
    _grad_disp_rate(declareProperty<RankTwoTensor>(_base_name + "grad_disp_rate"))
{
  for (unsigned int i = 0; i < _eigenstrains_old.size(); ++i)
    _eigenstrains_old[i] = &getMaterialPropertyOld<RankTwoTensor>(_eigenstrain_names[i]);

modules/solid_mechanics/src/userobjects/CrackFrontDefinition.C

358  
359  
360  
361 +
362  
363  
364  
365 +
366 +
367 +
368 +
369 +
370  
371 +
372 +
373  
374 +
375  
376  
377  
378  
379  
380 +
381  
382  
383  

}

void
CrackFrontDefinition::updateCrackFrontPoints()
{
  mooseAssert(_crack_front_points_provider, "_crack_front_points_provider is NULL");
  _crack_front_points =
      _crack_front_points_provider->getCrackFrontPoints(_num_points_from_provider);
  updateCrackFrontGeometry();
  std::size_t num_crack_front_points = getNumCrackFrontPoints();
  if (_q_function_type == "GEOMETRY")
    for (std::size_t i = 0; i < num_crack_front_points; ++i)
    {
      bool is_point_on_intersecting_boundary = isPointWithIndexOnIntersectingBoundary(i);
      _is_point_on_intersecting_boundary.push_back(is_point_on_intersecting_boundary);
    }
}

void
CrackFrontDefinition::initialize()
{
  if (_use_mesh_cutter && _is_cutter_modified)
    updateCrackFrontPoints();
}

void